tetgen 1.5

contrib/TetgenNew/CMakeLists.txt

+# Gmsh - Copyright (C) 1997-2012 C. Geuzaine, J.-F. Remacle
+#
+# See the LICENSE.txt file for license information. Please report all
+# bugs and problems to <gmsh@geuz.org>.
+
+set(SRC
+  tetgen.cxx
+  predicates.cxx
+)
+
+file(GLOB_RECURSE HDR RELATIVE ${CMAKE_CURRENT_SOURCE_DIR} *.h)
+append_gmsh_src(contrib/TetgenNew "${SRC};${HDR}")

contrib/TetgenNew/LICENSE

+TetGen License
+--------------
+
+The software (TetGen) is licensed under the terms of the  MIT  license
+with the following exceptions:
+
+Distribution of  modified  versions  of this code is permissible UNDER
+THE CONDITION THAT  THIS CODE AND ANY MODIFICATIONS  MADE TO IT IN THE
+SAME SOURCE FILES  tetgen.h AND tetgen.cxx  REMAIN UNDER  COPYRIGHT OF
+THE  ORIGINAL AUTHOR,  BOTH  SOURCE AND OBJECT  CODE  ARE MADE  FREELY
+AVAILABLE  WITHOUT   CHARGE,   AND  CLEAR   NOTICE  IS  GIVEN  OF  THE 
+MODIFICATIONS.
+
+Distribution of this code for  any  commercial purpose  is permissible
+ONLY BY DIRECT ARRANGEMENT WITH THE COPYRIGHT OWNER.
+
+The full  license text is reproduced below.
+
+This means that TetGen is no free software, but for private, research,
+and  educational purposes it  can be  used at  absolutely no  cost and
+without further arrangements.
+
+
+For details, see http://tetgen.org
+
+==============================================================================
+
+TetGen
+A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator
+Version 1.5 (Released on February 21, 2012).
+
+Copyright 2002 -- 2012 
+
+Hang Si
+Research Group of Numerical Mathematics and Scientific Computing
+Weierstrass Institute for Applied Analysis and Stochastics
+Mohrenstr. 39
+10117 Berlin, Germany
+
+Phone: +49 (0) 30-20372-446   Fax: +49 (0) 30-2044975
+EMail: <si@wias-berlin.de>
+Web Site: http://www.wias-berlin.de/~si
+
+Permission is hereby granted, free  of charge, to any person obtaining
+a  copy  of this  software  and  associated  documentation files  (the
+"Software"), to  deal in  the Software without  restriction, including
+without limitation  the rights to  use, copy, modify,  merge, publish,
+distribute,  sublicense and/or  sell copies  of the  Software,  and to
+permit persons to whom the Software  is furnished to do so, subject to
+the following conditions:
+
+Distribution of  modified  versions  of this code is permissible UNDER
+THE CONDITION THAT  THIS CODE AND ANY MODIFICATIONS  MADE TO IT IN THE
+SAME SOURCE FILES  tetgen.h AND tetgen.cxx  REMAIN UNDER  COPYRIGHT OF
+THE  ORIGINAL AUTHOR,  BOTH  SOURCE AND OBJECT  CODE  ARE MADE  FREELY
+AVAILABLE  WITHOUT   CHARGE,   AND  CLEAR   NOTICE  IS  GIVEN  OF  THE 
+MODIFICATIONS.
+
+Distribution of this code for  any  commercial purpose  is permissible
+ONLY BY DIRECT ARRANGEMENT WITH THE COPYRIGHT OWNER.
+
+The  above  copyright  notice  and  this permission  notice  shall  be
+included in all copies or substantial portions of the Software.
+
+THE  SOFTWARE IS  PROVIDED  "AS  IS", WITHOUT  WARRANTY  OF ANY  KIND,
+EXPRESS OR  IMPLIED, INCLUDING  BUT NOT LIMITED  TO THE  WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT  SHALL THE AUTHORS OR COPYRIGHT HOLDERS  BE LIABLE FOR ANY
+CLAIM, DAMAGES OR  OTHER LIABILITY, WHETHER IN AN  ACTION OF CONTRACT,
+TORT  OR OTHERWISE, ARISING  FROM, OUT  OF OR  IN CONNECTION  WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+==============================================================================
\ No newline at end of file

contrib/TetgenNew/README

+This is TetGen version 1.5 (released on February 21, 2012)
+
+Please see the documentation of TetGen for compiling and using TetGen.
+It is available at the following link:
+
+            http://www.tetgen.org
+
+For more information on this product, contact :
+
+  Hang Si
+  Research Group of Numerical Mathematics and Scientific Computing
+  Weierstrass Institute for Applied Analysis and Stochastics
+  Mohrenstr. 39
+  10117 Berlin, Germany
+
+ Phone: +49 (0) 30-20372-446   Fax: +49 (0) 30-2044975
+ EMail: <si@wias-berlin.de>
+ Web Site: http://www.wias-berlin.de/~si
+
+------------------- IMPORTANCE NOTICE -----------------------------
+
+BEFORE INTALLING OR USING TetGen(R) READ the 
+GENERAL LICENSE TERMS AND CONDITIONS
+
+-------------------------------------------------------------------
\ No newline at end of file

contrib/TetgenNew/example.poly

+#
+# example.poly - Sample file of TetGen.
+#
+# A .poly file describes a piecewise linear complex (PLC)
+# This file represents a compensated magic tee junction.
+#
+# The source file is from: Vali Catina <catina@uni-bremen.de>
+#
+
+# Part 1 - node list
+54  3  0  0
+   1    -13.716000000000001  -5.0800000000000001  0
+   2    -13.716000000000001  5.0800000000000001  0
+   3    -11.43  5.0800000000000001  0
+   4    11.43  -5.0800000000000001  0
+   5    11.43  7.3659999999999997  0
+   6    -11.43  7.3659999999999997  0
+   7    0.95105651629515364  -0.37999999999999989  0
+   8    -0.95105651629515364  -0.37999999999999989  0
+   9    -0.95105651629515364  4.6200000000000001  0
+  10    0.95105651629515364  4.6200000000000001  0
+  11    -0.95105651629515353  4.6200000000000001  -0.30901699437494756
+  12    -0.58778525229247303  4.6200000000000001  -0.80901699437494756
+  13    1.2246063538223773e-16  4.6200000000000001  -1
+  14    0.58778525229247325  4.6200000000000001  -0.80901699437494734
+  15    0.95105651629515364  4.6200000000000001  -0.30901699437494734
+  16    -0.95105651629515353  -0.37999999999999989  -0.30901699437494756
+  17    -0.58778525229247303  -0.37999999999999989  -0.80901699437494756
+  18    1.2246063538223773e-16  -0.37999999999999989  -1
+  19    0.58778525229247325  -0.37999999999999989  -0.80901699437494734
+  20    0.95105651629515364  -0.37999999999999989  -0.30901699437494734
+  21    -1.5874999999999999  -0.37999999999999989  -2.9160938800395356e-16
+  22    -1.5098022196185561  -0.37999999999999989  -0.49056447857022928
+  23    -1.2843144785702287  -0.37999999999999989  -0.93310908801430126
+  24    -0.93310908801430081  -0.37999999999999989  -1.2843144785702292
+  25    -0.49056447857022878  -0.37999999999999989  -1.5098022196185563
+  26    1.9440625866930238e-16  -0.37999999999999989  -1.5874999999999999
+  27    0.49056447857022917  -0.37999999999999989  -1.5098022196185561
+  28    0.93310908801430115  -0.37999999999999989  -1.284314478570229
+  29    1.284314478570229  -0.37999999999999989  -0.93310908801430092
+  30    1.5098022196185563  -0.37999999999999989  -0.49056447857022889
+  31    1.5874999999999999  -0.37999999999999989  9.7203129334651192e-17
+  32    -1.5874999999999999  -5.0800000000000001  -2.9160938800395356e-16
+  33    -1.5098022196185561  -5.0800000000000001  -0.49056447857022928
+  34    -1.2843144785702287  -5.0800000000000001  -0.93310908801430126
+  35    -0.93310908801430081  -5.0800000000000001  -1.2843144785702292
+  36    -0.49056447857022878  -5.0800000000000001  -1.5098022196185563
+  37    1.9440625866930238e-16  -5.0800000000000001  -1.5874999999999999
+  38    0.49056447857022917  -5.0800000000000001  -1.5098022196185561
+  39    0.93310908801430115  -5.0800000000000001  -1.284314478570229
+  40    1.284314478570229  -5.0800000000000001  -0.93310908801430092
+  41    1.5098022196185563  -5.0800000000000001  -0.49056447857022889
+  42    1.5874999999999999  -5.0800000000000001  9.7203129334651192e-17
+  43    -11.43  7.3659999999999997  -5.0800000000000001
+  44    11.43  7.3659999999999997  -5.0800000000000001
+  45    -11.43  5.0800000000000001  -5.0800000000000001
+  46    11.43  5.0800000000000001  -5.0800000000000001
+  47    -13.716000000000001  5.0800000000000001  -11.43
+  48    -13.716000000000001  -5.0800000000000001  -11.43
+  49    -11.43  -5.0800000000000001  -11.43
+  50    -11.43  5.0800000000000001  -11.43
+  51    -11.43  -5.0800000000000001  -13.715999999999999
+  52    11.43  -5.0800000000000001  -13.715999999999999
+  53    11.43  5.0800000000000001  -13.715999999999999
+  54    -11.43  5.0800000000000001  -13.715999999999999
+
+# Part 2 - facet list
+29 1
+1 0  1
+14 1 2 3 6 5 4 42 31 7 10 9 8 21 32
+1 0  1
+7 9 10 15 14 13 12 11
+1 0  1
+4 8 9 11 16
+1 0  1
+4 11 12 17 16
+1 0  1
+4 12 13 18 17
+1 0  1
+4 13 14 19 18
+1 0  1
+4 14 15 20 19
+1 0  1
+4 10 7 20 15
+1 0  1
+18 7 31 30 29 28 27 26 25 24 23 22 21 8 16 17 18 19 20
+1 0  1
+4 21 22 33 32
+1 0  1
+4 22 23 34 33
+1 0  1
+4 23 24 35 34
+1 0  1
+4 24 25 36 35
+1 0  1
+4 25 26 37 36
+1 0  1
+4 26 27 38 37
+1 0  1
+4 27 28 39 38
+1 0  1
+4 28 29 40 39
+1 0  1
+4 29 30 41 40
+1 0  1
+4 30 31 42 41
+1 0  1
+4 43 45 46 44
+1 0  1
+4 5 6 43 44
+1 0  1
+6 4 5 44 46 53 52
+1 0  1
+4 6 3 45 43
+1 0  1
+4 47 48 49 50
+1 0  1
+8 3 2 47 50 54 53 46 45
+1 0  1
+17 42 4 52 51 49 48 1 32 33 34 35 36 37 38 39 40 41
+1 0  1
+4 2 1 48 47
+1 0  1
+4 50 49 51 54
+1 0  1
+4 54 51 52 53
+
+# Part 3 - hole list
+0
+
+# Part 4 - region list
+0

contrib/TetgenNew/makefile

+###############################################################################
+#                                                                             #
+# makefile for TetGen                                                         #
+#                                                                             #
+# Type "make" to compile TetGen into an executable program (tetgen).          #
+# Type "make tetlib" to compile TetGen into a library (libtet.a).             #
+# Type "make distclean" to delete all object (*.o) files.                     #
+#                                                                             #
+###############################################################################
+
+# CXX should be set to the name of your favorite C++ compiler.
+# ===========================================================
+
+CXX = g++
+#CXX = icpc
+#CXX = CC
+
+# CXXFLAGS is the level of optimiztion, default is -O. One should try
+# -O2, -O3 ... to find the best optimization level.
+# ===================================================================
+
+CXXFLAGS = -g
+
+# PREDCXXFLAGS is for compiling J. Shewchuk's predicates. It should
+# always be equal to -O0 (no optimization). Otherwise, TetGen may not
+# work properly.
+
+PREDCXXFLAGS = -O0
+
+# SWITCHES is a list of switches to compile TetGen.
+# =================================================
+#
+# By default, TetGen uses double precision floating point numbers.  If you
+#   prefer single precision, use the -DSINGLE switch. 
+#
+# The source code of TetGen includes a lot of assertions, which are mainly
+#   used for catching bugs at that places.  These assertions somewhat slow
+#   down the speed of TetGen.  They can be skipped by define the -DNDEBUG
+#   switch.
+
+SWITCHES = -Wall -DSELF_CHECK
+
+# SWITCHES = -Wall -Wabi -Wctor-dtor-privacy \
+#            -Woverloaded-virtual -Wno-pmf-conversions -Wsign-promo \
+#            -Wsynth  -Wchar-subscripts -Wconversion -Wsign-compare \
+#            -Wcomment  -Wimplicit -Wmissing-braces -Wparentheses \
+#            -Wreturn-type -Wswitch -Wswitch-default \
+#            -Wswitch-enum -Wtrigraphs -W -DSELF_CHECK
+
+# RM should be set to the name of your favorite rm (file deletion program).
+
+RM = /bin/rm
+
+# The action starts here.
+
+tetgen:	tetgen.cxx predicates.o
+	$(CXX) $(CXXFLAGS) $(SWITCHES) -o tetgen tetgen.cxx predicates.o -lm
+
+tetlib: tetgen.cxx predicates.o
+	$(CXX) $(CXXFLAGS) $(SWITCHES) -DTETLIBRARY -c tetgen.cxx
+	ar r libtet.a tetgen.o predicates.o
+
+predicates.o: predicates.cxx
+	$(CXX) $(PREDCXXFLAGS) -c predicates.cxx
+
+clean:
+	$(RM) *.o *.a tetgen *~
+
+
+
+