No commit message

No commit message

doc/texinfo/opt_mesh.texi

@@ -240,7 +240,7 @@ Default value: @code{0}@*
 Saved in: @code{General.OptionsFileName}
 
 @item Mesh.MetisAlgorithm
-METIS partitioning algorithm (1=Recursive, 2=K-way)@*
+METIS partitioning algorithm (1=Recursive, 2=K-way, 3=Nodal weight)@*
 Default value: @code{1}@*
 Saved in: @code{General.OptionsFileName}
 
@@ -404,6 +404,11 @@ Number of refinement steps in the MeshAdapt-based 2D algorithms@*
 Default value: @code{10}@*
 Saved in: @code{General.OptionsFileName}
 
+@item Mesh.Remove4Triangles
+Try to remove nodes surrounded by 4 triangles in 2D triangular meshes@*
+Default value: @code{0}@*
+Saved in: @code{General.OptionsFileName}
+
 @item Mesh.ReverseAllNormals
 Reverse all the mesh normals (for display)@*
 Default value: @code{0}@*

doc/texinfo/opt_plugin.texi

@@ -427,38 +427,6 @@ Default value: @code{-1}
 Default value: @code{-1}
 @end table
 
-@item Plugin(FiniteElement)
-Plugin(FiniteElement) solves simple PDEs
-using the finite element method. This is only
-intended as a demonstration tool: it is NOT
-intended for general use.
-Plugin(FiniteElement) creates a new view.
-
-String options:
-@table @code
-@item Equation
-Default value: @code{"Projection"}
-@item Parameter
-Default value: @code{"Sin(x*y)"}
-@item Gamma1BC
-Default value: @code{""}
-@item Gamma2BC
-Default value: @code{""}
-@end table
-Numeric options:
-@table @code
-@item Omega
-Default value: @code{1}
-@item Gamma1
-Default value: @code{0}
-@item Gamma1Value
-Default value: @code{0}
-@item Gamma2
-Default value: @code{0}
-@item Gamma2Value
-Default value: @code{0}
-@end table
-
 @item Plugin(GSHHS)
 Plugin(GSHHS) read different kind of contour lines data
 and write a .geo file on the surface of a sphere (the Earth).
@@ -860,6 +828,19 @@ Default value: @code{-1}
 Default value: @code{-1}
 @end table
 
+@item Plugin(Tetrahedralize)
+Plugin(Tetrahedralize) tetrahedralizes the points in the
+view `iView'. If `iView' < 0, the plugin is run on
+the current view.
+
+Plugin(Tetrahedralize) creates one new view.
+
+Numeric options:
+@table @code
+@item iView
+Default value: @code{-1}
+@end table
+
 @item Plugin(Transform)
 Plugin(Transform) transforms the homogeneous
 node coordinates (x,y,z,1) of the elements in

doc/texinfo/opt_solver.texi

@@ -31,7 +31,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.InputName0
 Default input file name for solver 0@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.Extension0
 Default file name extension for solver 0@*
@@ -41,7 +41,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.MeshName0
 Default mesh file name for solver 0@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.MeshCommand0
 Command used to specify the mesh file for solver 0@*
@@ -156,7 +156,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.InputName1
 Default input file name for solver 1@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.Extension1
 Default file name extension for solver 1@*
@@ -166,7 +166,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.MeshName1
 Default mesh file name for solver 1@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.MeshCommand1
 Command used to specify the mesh file for solver 1@*
@@ -281,7 +281,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.InputName2
 Default input file name for solver 2@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.Extension2
 Default file name extension for solver 2@*
@@ -291,7 +291,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.MeshName2
 Default mesh file name for solver 2@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.MeshCommand2
 Command used to specify the mesh file for solver 2@*
@@ -406,7 +406,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.InputName3
 Default input file name for solver 3@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.Extension3
 Default file name extension for solver 3@*
@@ -416,7 +416,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.MeshName3
 Default mesh file name for solver 3@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.MeshCommand3
 Command used to specify the mesh file for solver 3@*
@@ -531,7 +531,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.InputName4
 Default input file name for solver 4@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.Extension4
 Default file name extension for solver 4@*
@@ -541,7 +541,7 @@ Saved in: @code{General.OptionsFileName}
 @item Solver.MeshName4
 Default mesh file name for solver 4@*
 Default value: @code{""}@*
-Saved in: @code{General.OptionsFileName}
+Saved in: @code{-}
 
 @item Solver.MeshCommand4
 Command used to specify the mesh file for solver 4@*

doc/texinfo/opt_view.texi

@@ -259,6 +259,51 @@ Swap the min/max values in the colormap?@*
 Default value: @code{0}@*
 Saved in: @code{General.OptionsFileName}
 
+@item View.ComponentMap0
+Forced component 0 (if View.ForceComponents > 0)@*
+Default value: @code{0}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap1
+Forced component 1 (if View.ForceComponents > 0)@*
+Default value: @code{1}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap2
+Forced component 2 (if View.ForceComponents > 0)@*
+Default value: @code{2}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap3
+Forced component 3 (if View.ForceComponents > 0)@*
+Default value: @code{3}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap4
+Forced component 4 (if View.ForceComponents > 0)@*
+Default value: @code{4}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap5
+Forced component 5 (if View.ForceComponents > 0)@*
+Default value: @code{5}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap6
+Forced component 6 (if View.ForceComponents > 0)@*
+Default value: @code{6}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap7
+Forced component 7 (if View.ForceComponents > 0)@*
+Default value: @code{7}@*
+Saved in: @code{General.OptionsFileName}
+
+@item View.ComponentMap8
+Forced component 8 (if View.ForceComponents > 0)@*
+Default value: @code{8}@*
+Saved in: @code{General.OptionsFileName}
+
 @item View.CustomMax
 User-defined maximum value to be displayed@*
 Default value: @code{0}@*
@@ -354,6 +399,11 @@ Use fake transparency (cheaper than the real thing, but incorrect)@*
 Default value: @code{0}@*
 Saved in: @code{General.OptionsFileName}
 
+@item View.ForceNumComponents
+Force number of components to display (see View.ComponentMapN for mapping)@*
+Default value: @code{0}@*
+Saved in: @code{General.OptionsFileName}
+
 @item View.GeneralizedRaiseFactor
 Generalized raise amplification factor@*
 Default value: @code{1}@*
@@ -451,7 +501,7 @@ Saved in: @code{-}
 
 @item View.NbIso
 Number of intervals@*
-Default value: @code{15}@*
+Default value: @code{10}@*
 Saved in: @code{General.OptionsFileName}
 
 @item View.NbTimeStep