OCCEdge.cpp

// $Id: OCCEdge.cpp,v 1.19 2007-01-31 12:27:18 remacle Exp $
//
// Copyright (C) 1997-2007 C. Geuzaine, J.-F. Remacle
//
// This program is free software; you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation; either version 2 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program; if not, write to the Free Software
// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
// USA.
// 
// Please report all bugs and problems to <gmsh@geuz.org>.

#include "GModel.h"
#include "Message.h"
#include "OCCEdge.h"
#include "OCCFace.h"
#include "Context.h"
extern Context_T CTX;

#if defined(HAVE_OCC)
#include "Geom2dLProp_CLProps2d.hxx"
#include "Geom_BezierCurve.hxx"
#include "Geom_BezierCurve.hxx"
#include "Geom_Ellipse.hxx"
#include "Geom_Circle.hxx"
#include "Geom_Line.hxx"

OCCEdge::OCCEdge(GModel *model, TopoDS_Edge edge, int num, GVertex *v1, GVertex *v2)
  : GEdge(model, num, v1, v2), c(edge), trimmed(0)
{
  curve = BRep_Tool::Curve(c, s0, s1);
  // build the reverse curve
  c_rev = c;
  c_rev.Reverse();
}

Range<double> OCCEdge::parBounds(int i) const
{ 
  return(Range<double>(s0,s1));
}

void OCCEdge::setTrimmed (OCCFace *f)
{
  if (!trimmed){
    trimmed = f;
    const TopoDS_Face *s = (TopoDS_Face*) trimmed->getNativePtr();
    curve2d = BRep_Tool::CurveOnSurface(c, *s, s0, s1);
    if (curve2d.IsNull())  trimmed = 0;
  }
}

SPoint2 OCCEdge::reparamOnFace(GFace *face, double epar,int dir) const
{
  const TopoDS_Face *s = (TopoDS_Face*) face->getNativePtr();
  double t0,t1;
  Handle(Geom2d_Curve) c2d;

  if(dir == 1)
    {
      c2d = BRep_Tool::CurveOnSurface(c, *s, t0, t1);
    }
  else
    {
      c2d = BRep_Tool::CurveOnSurface(c_rev, *s, t0, t1);
    }
  
  if(c2d.IsNull()){
    Msg(FATAL,"Reparam on face failed : curve %d is not on surface %d",tag(),face->tag());
  }

  double u,v;
  gp_Pnt2d pnt = c2d->Value(epar);
  pnt.Coord(u,v);

  {
    // sometimes OCC miserably fails ...
    GPoint p1 = point(epar);
    GPoint p2 = face->point(u,v);
    const double dx = p1.x()-p2.x();
    const double dy = p1.y()-p2.y();
    const double dz = p1.z()-p2.z();
    if(sqrt(dx*dx+dy*dy+dz*dz) > 1.e-7 * CTX.lc){
      //      return reparamOnFace(face, epar,-1);      
      Msg(WARNING,"Reparam on face partially failed for curve %d surface %d at point %g",tag(),face->tag(),epar);
      Msg(WARNING,"On the face %d local (%g %g) global (%g %g %g)",face->tag(),u,v,p2.x(),p2.y(),p2.z());
      Msg(WARNING,"On the edge %d local (%g) global (%g %g %g)",tag(),epar,p1.x(),p1.y(),p1.z());
      GPoint ppp = face->closestPoint(SPoint3(p1.x(),p1.y(),p1.z()));
      return SPoint2(ppp.u(),ppp.v());
    }
  }
  return SPoint2(u,v);
}

// True if the edge is a seam for the given face
int OCCEdge::isSeam(GFace *face) const
{
  const TopoDS_Face *s = (TopoDS_Face*) face->getNativePtr();
  BRepAdaptor_Surface surface( *s );
  if(surface.IsUPeriodic() || surface.IsVPeriodic()){
    return BRep_Tool::IsClosed( c, *s );
  }
  return 0;
}

GPoint OCCEdge::point(double par) const
{
  if(!curve.IsNull()){
    gp_Pnt pnt = curve->Value (par);
    return GPoint(pnt.X(),pnt.Y(),pnt.Z());
  }
  else if(trimmed){
    double u,v;
    curve2d->Value(par).Coord(u,v);
    return trimmed->point(u,v);
  }
  else{
    Msg(WARNING,"OCC Curve %d is neither a 3D curve not a trimmed curve",tag());
    return GPoint (0,0,0);
  }
}

GPoint OCCEdge::closestPoint(const SPoint3 & qp)
{
  throw;
}

int OCCEdge::containsParam(double pt) const
{
  Range<double> rg = parBounds(0);
  return (pt >= rg.low() && pt <= rg.high());
}

SVector3 OCCEdge::firstDer(double par) const
{  
  BRepAdaptor_Curve brepc(c);
  BRepLProp_CLProps prop(brepc, 1, 1e-5);
  prop.SetParameter (par);
  gp_Vec d1 = prop.D1();
  return SVector3(d1.X(), d1.Y(), d1.Z());
}

double OCCEdge::parFromPoint(const SPoint3 &pt) const
{
  throw;
}

GEntity::GeomType OCCEdge::geomType() const
{
  if(curve.IsNull()){
    if (curve2d->DynamicType() == STANDARD_TYPE(Geom_Circle))
      return Circle;
    else if (curve2d->DynamicType() == STANDARD_TYPE(Geom_Line))
      return Line;
    else if (curve2d->DynamicType() == STANDARD_TYPE(Geom_Ellipse))
      return Ellipse;
    else if (curve2d->DynamicType() == STANDARD_TYPE(Geom_BSplineCurve))
      return BSpline;
    else if (curve2d->DynamicType() == STANDARD_TYPE(Geom_BezierCurve))
      return Bezier;
    return Unknown;
  }
  else{
    if (curve->DynamicType() == STANDARD_TYPE(Geom_Circle))
      return Circle;
    else if (curve->DynamicType() == STANDARD_TYPE(Geom_Line))
      return Line;
    else if (curve->DynamicType() == STANDARD_TYPE(Geom_Ellipse))
      return Ellipse;
    else if (curve->DynamicType() == STANDARD_TYPE(Geom_BSplineCurve))
      return BSpline;
    else if (curve->DynamicType() == STANDARD_TYPE(Geom_BezierCurve))
      return Bezier;
    return Unknown;
  }
}

int OCCEdge::minimumMeshSegments() const
{
  if(geomType() == Line || geomType() == Unknown)
    return GEdge::minimumMeshSegments();
  else
    return 2; // always put at least one mid-point on non-straight lines
}

int OCCEdge::minimumDrawSegments() const
{
  int n = GEdge::minimumDrawSegments();

  if(geomType() == Line)
    return n;
  else if(geomType() == Circle || geomType() == Ellipse)
    return CTX.geom.circle_points;
  else
    return 20 * n;
}

double OCCEdge::curvature(double par) const 
{
  const double eps = 1.e-15;
  Standard_Real Crv;
  if (curve.IsNull()){
    Geom2dLProp_CLProps2d aCLProps(curve2d, 2, eps);
    aCLProps.SetParameter (par);
    if(!aCLProps.IsTangentDefined())
      Crv =eps;
    else
      Crv = aCLProps.Curvature();
  }
  else{
    BRepAdaptor_Curve brepc(c);
    BRepLProp_CLProps prop(brepc, 2, eps);
    prop.SetParameter (par); 
    if (!prop.IsTangentDefined())
      Crv = eps;
    else
      Crv = prop.Curvature();
  }
  if (Crv <= eps)Crv = eps;
  
  // std::list<GFace*> ff = faces();
  // std::list<GFace *>::iterator it =  ff.begin();
  // while (it != ff.end()){
  //   SPoint2 par2 = reparamOnFace((*it),par,1);
  //   const double cc = (*it)->curvature ( par2 );
  //   if (cc > 0)
  //     Crv = std::max( Crv, cc);  
  //   ++it;
  // }  
  // printf("curvature = %12.5E\n",Crv); 

  return Crv;
}

#endif