clean file

Forge Molding Compound STR120N131/README.md

@@ -4,12 +4,10 @@ Hereby, the material is a sheet molding compound (SMC) consisting out of 25.4 mm
 For a full characterization of the material flow behavior the following tests were performed at 80°C and 100°C.
 -) Squeeze Flow Rheometry
 -) Pressure-specific Volume-Temperature Dilatometry
-
 The structural properties of the cured SMC material were analysed for different plate thicknesses (2mm, 4mm, 6mm and 8mm) by 
 -) Tensile tests
 -) Three point bending tests
 -) Dynamic mechanical analysis including temperature and frequency sweeps
-
 Further information can be found in the following publications:
 -) Zulueta et al., Advancing on viscosity characterization and modelling of SMC for compression molding simulation, DOI: 10.1002/pc.27510
 -) Doppelbauer et al., A macroscopic model of the compaction process during compression molding of carbon fiber sheet molding compounds, DOI: https://doi.org/10.1016/j.compositesa.2023.107535