Skip to content
Snippets Groups Projects
Commit ffb6c8f9 authored by Christophe Geuzaine's avatar Christophe Geuzaine
Browse files

*** empty log message ***

parent c226af9f
No related branches found
No related tags found
No related merge requests found
Show whitespace changes
Inline Side-by-side
benchmarks/3d/stator-newxtr-rec.geo
+ 42
− 122
View file @ ffb6c8f9
......@@ -63,148 +63,68 @@ Plane Surface(10) = {9};
// 1st gap
Extrude Surface {2, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9000+100}, {1} } ;
};
Extrude Surface {4, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9004+100}, {1} } ;
};
Extrude Surface {6, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9008+100}, {1} } ;
};
Extrude Surface {8, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9012+100}, {1} } ;
};
Extrude Surface {10, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9016+100}, {1} } ;
};
Extrude Surface {2, {0,0,1}, {0,0,0}, Pi/180}{ Recombine ; Layers { 1, 9000+100, 1 } ;};
Extrude Surface {4, {0,0,1}, {0,0,0}, Pi/180}{ Recombine ; Layers { 1, 9004+100, 1 } ;};
Extrude Surface {6, {0,0,1}, {0,0,0}, Pi/180}{ Recombine ; Layers { 1, 9008+100, 1 } ;};
Extrude Surface {8, {0,0,1}, {0,0,0}, Pi/180}{ Recombine ; Layers { 1, 9012+100, 1 } ;};
Extrude Surface {10, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { 1, 9016+100, 1 } ;};
// 1st piezo
Extrude Surface {37, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9000,9000,9000,9000,9000,9000,9000 },{0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {59, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9004,9004,9004,9004,9004,9004,9004 },{0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1 } } ;
};
Extrude Surface {81, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9008,9008,9008,9008,9008,9008,9008},{0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1 } } ;
};
Extrude Surface {103, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9012,9012,9012,9012,9012,9012,9012 },{0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1 } } ;
};
Extrude Surface {125, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9016,9016,9016,9016,9016,9016,9016 },{0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1 } } ;
};
ne[] = {1,1,1,nArc,1,1,1};
nd[] = {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1};
Extrude Surface {37, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{ Recombine ; Layers { ne[], {9000,9000,9000,9000,9000,9000,9000}, nd[]} ;};
Extrude Surface {59, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{ Recombine ; Layers { ne[], {9004,9004,9004,9004,9004,9004,9004}, nd[]} ;};
Extrude Surface {81, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{ Recombine ; Layers { ne[], {9008,9008,9008,9008,9008,9008,9008}, nd[]} ;};
Extrude Surface {103, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{ Recombine ; Layers { ne[], {9012,9012,9012,9012,9012,9012,9012 },nd[] } ;};
Extrude Surface {125, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{ Recombine ; Layers { ne[], {9016,9016,9016,9016,9016,9016,9016 },nd[] } ;};
// 2nd gap
Extrude Surface {147, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9001+200}, {1} } ;
};
Extrude Surface {169, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9005+200}, {1} } ;
};
Extrude Surface {191, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9009+200}, {1} } ;
};
Extrude Surface {213, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9013+200}, {1} } ;
};
Extrude Surface {235, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9017+200}, {1} } ;
};
Extrude Surface {147, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9001+200}, {1} } ;};
Extrude Surface {169, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9005+200}, {1} } ;};
Extrude Surface {191, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9009+200}, {1} } ;};
Extrude Surface {213, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9013+200}, {1} } ;};
Extrude Surface {235, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9017+200}, {1} } ;};
// 2nd pizeo
Extrude Surface {257, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9001,9001,9001,9001,9001,9001,9001,9001}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {279, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9005, 9005,9005,9005, 9005,9005,9005}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {301, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9009, 9009,9009,9009, 9009,9009,9009}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {323, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9013, 9013,9013,9013, 9013,9013,9013}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {345, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9017, 9017,9017,9017, 9017,9017,9017}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {257, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9001, 9001,9001,9001, 9001,9001,9001}, nd[] } ;};
Extrude Surface {279, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9005, 9005,9005,9005, 9005,9005,9005}, nd[] } ;};
Extrude Surface {301, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9009, 9009,9009,9009, 9009,9009,9009}, nd[] } ;};
Extrude Surface {323, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9013, 9013,9013,9013, 9013,9013,9013}, nd[] } ;};
Extrude Surface {345, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9017, 9017,9017,9017, 9017,9017,9017}, nd[] } ;};
// 3rd gap
Extrude Surface {257+110, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9002+300}, {1} } ;
};
Extrude Surface {279+110, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9006+300}, {1} } ;
};
Extrude Surface {301+110, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9010+300}, {1} } ;
};
Extrude Surface {323+110, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9014+300}, {1} } ;
};
Extrude Surface {345+110, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9018+300}, {1} } ;
};
Extrude Surface {257+110, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9002+300}, {1} } ;};
Extrude Surface {279+110, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9006+300}, {1} } ;};
Extrude Surface {301+110, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9010+300}, {1} } ;};
Extrude Surface {323+110, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9014+300}, {1} } ;};
Extrude Surface {345+110, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9018+300}, {1} } ;};
// 3rd piezo
Extrude Surface {257+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9002, 9002,9002,9002, 9002,9002,9002 }, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {279+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9006, 9006,9006,9006, 9006,9006,9006}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {301+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9010, 9010,9010,9010, 9010,9010,9010}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {323+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9014, 9014,9014,9014, 9014,9014,9014}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {345+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9018, 9018,9018,9018, 9018,9018,9018}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {257+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9002, 9002,9002,9002, 9002,9002,9002}, nd[] } ;};
Extrude Surface {279+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9006, 9006,9006,9006, 9006,9006,9006}, nd[] } ;};
Extrude Surface {301+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9010, 9010,9010,9010, 9010,9010,9010}, nd[] } ;};
Extrude Surface {323+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9014, 9014,9014,9014, 9014,9014,9014}, nd[] } ;};
Extrude Surface {345+220, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9018, 9018,9018,9018, 9018,9018,9018}, nd[] } ;};
// 4th gap
Extrude Surface {257+330, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9003+400}, {1} } ;
};
Extrude Surface {279+330, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9007+400}, {1} } ;
};
Extrude Surface {301+330, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9011+400}, {1} } ;
};
Extrude Surface {323+330, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9015+400}, {1} } ;
};
Extrude Surface {345+330, {0,0,1}, {0,0,0}, Pi/180}{
Recombine ; Layers { {1}, {9019+400}, {1} } ;
};
Extrude Surface {257+330, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9003+400}, {1} } ;};
Extrude Surface {279+330, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9007+400}, {1} } ;};
Extrude Surface {301+330, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9011+400}, {1} } ;};
Extrude Surface {323+330, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9015+400}, {1} } ;};
Extrude Surface {345+330, {0,0,1}, {0,0,0}, Pi/180}{Recombine ; Layers { {1}, {9019+400}, {1} } ;};
// 4th pizeo
Extrude Surface {257+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1 }, {9003,9003,9003,9003,9003,9003,9003},{0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {279+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9007,9007,9007,9007,9007,9007,9007}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {301+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9011,9011,9011,9011,9011,9011,9011}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1}} ;
};
Extrude Surface {323+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9015,9015,9015,9015,9015,9015,9015}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {345+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{
Recombine ; Layers { {1,1,1,nArc,1,1,1}, {9019,9019,9019,9019,9019,9019,9019}, {0.02, 0.05, 0.09, 0.91, 0.95, 0.98, 1} } ;
};
Extrude Surface {257+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9003,9003,9003,9003,9003,9003,9003}, nd[] } ;};
Extrude Surface {279+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9007,9007,9007,9007,9007,9007,9007}, nd[] } ;};
Extrude Surface {301+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9011,9011,9011,9011,9011,9011,9011}, nd[] } ;};
Extrude Surface {323+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9015,9015,9015,9015,9015,9015,9015}, nd[] } ;};
Extrude Surface {345+440, {0,0,1}, {0,0,0}, Pi/2-Pi/180}{Recombine ; Layers { ne[], {9019,9019,9019,9019,9019,9019,9019}, nd[] } ;};
PZTA = 1000;
PZTB = 1500;
......
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Please register or to comment