diff --git a/contrib/Tetgen/LICENSE b/contrib/Tetgen/LICENSE
index 456b0bbe48b29e069a48c5c226c10d51e77b25da..0af6b89a1d6edf53c436e507f4ffcbcf56be461d 100644
--- a/contrib/Tetgen/LICENSE
+++ b/contrib/Tetgen/LICENSE
@@ -1,65 +1,65 @@
-TetGen License
---------------
-
-The software (TetGen) is licensed under the terms of the MIT license
-with the following exceptions:
-
-Distribution of modified versions of this code is permissible UNDER
-THE CONDITION THAT THIS CODE AND ANY MODIFICATIONS MADE TO IT IN THE
-SAME SOURCE FILES tetgen.h AND tetgen.cxx REMAIN UNDER COPYRIGHT OF
-THE ORIGINAL AUTHOR, BOTH SOURCE AND OBJECT CODE ARE MADE FREELY
-AVAILABLE WITHOUT CHARGE, AND CLEAR NOTICE IS GIVEN OF THE
-MODIFICATIONS.
-
-Distribution of this code for any commercial purpose is permissible
-ONLY BY DIRECT ARRANGEMENT WITH THE COPYRIGHT OWNER.
-
-The full license text is reproduced below.
-
-This means that TetGen is no free software, but for private, research,
-and educational purposes it can be used at absolutely no cost and
-without further arrangements.
-
-
-For details, see http://tetgen.berlios.de
-
-==============================================================================
-
-TetGen
-A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator
-Version 1.3 (Released on June 13, 2004).
-
-Copyright 2002, 2004 Hang Si
-Rathausstr. 9, 10178 Berlin, Germany
-si@wias-berlin.de
-
-Permission is hereby granted, free of charge, to any person obtaining
-a copy of this software and associated documentation files (the
-"Software"), to deal in the Software without restriction, including
-without limitation the rights to use, copy, modify, merge, publish,
-distribute, sublicense and/or sell copies of the Software, and to
-permit persons to whom the Software is furnished to do so, subject to
-the following conditions:
-
-Distribution of modified versions of this code is permissible UNDER
-THE CONDITION THAT THIS CODE AND ANY MODIFICATIONS MADE TO IT IN THE
-SAME SOURCE FILES tetgen.h AND tetgen.cxx REMAIN UNDER COPYRIGHT OF
-THE ORIGINAL AUTHOR, BOTH SOURCE AND OBJECT CODE ARE MADE FREELY
-AVAILABLE WITHOUT CHARGE, AND CLEAR NOTICE IS GIVEN OF THE
-MODIFICATIONS.
-
-Distribution of this code for any commercial purpose is permissible
-ONLY BY DIRECT ARRANGEMENT WITH THE COPYRIGHT OWNER.
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
-MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
-IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
-CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
-TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
-SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-
+TetGen License
+--------------
+
+The software (TetGen) is licensed under the terms of the MIT license
+with the following exceptions:
+
+Distribution of modified versions of this code is permissible UNDER
+THE CONDITION THAT THIS CODE AND ANY MODIFICATIONS MADE TO IT IN THE
+SAME SOURCE FILES tetgen.h AND tetgen.cxx REMAIN UNDER COPYRIGHT OF
+THE ORIGINAL AUTHOR, BOTH SOURCE AND OBJECT CODE ARE MADE FREELY
+AVAILABLE WITHOUT CHARGE, AND CLEAR NOTICE IS GIVEN OF THE
+MODIFICATIONS.
+
+Distribution of this code for any commercial purpose is permissible
+ONLY BY DIRECT ARRANGEMENT WITH THE COPYRIGHT OWNER.
+
+The full license text is reproduced below.
+
+This means that TetGen is no free software, but for private, research,
+and educational purposes it can be used at absolutely no cost and
+without further arrangements.
+
+
+For details, see http://tetgen.berlios.de
+
+==============================================================================
+
+TetGen
+A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator
+Version 1.3 (Released on June 13, 2004).
+
+Copyright 2002, 2004 Hang Si
+Rathausstr. 9, 10178 Berlin, Germany
+si@wias-berlin.de
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+Distribution of modified versions of this code is permissible UNDER
+THE CONDITION THAT THIS CODE AND ANY MODIFICATIONS MADE TO IT IN THE
+SAME SOURCE FILES tetgen.h AND tetgen.cxx REMAIN UNDER COPYRIGHT OF
+THE ORIGINAL AUTHOR, BOTH SOURCE AND OBJECT CODE ARE MADE FREELY
+AVAILABLE WITHOUT CHARGE, AND CLEAR NOTICE IS GIVEN OF THE
+MODIFICATIONS.
+
+Distribution of this code for any commercial purpose is permissible
+ONLY BY DIRECT ARRANGEMENT WITH THE COPYRIGHT OWNER.
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
==============================================================================
\ No newline at end of file
diff --git a/contrib/Tetgen/predicates.cxx b/contrib/Tetgen/predicates.cxx
index e3dd38ae4821433ef0abce353db023848461734f..0d41e5badff839b4446a99ef314f13c44fd37bf2 100644
--- a/contrib/Tetgen/predicates.cxx
+++ b/contrib/Tetgen/predicates.cxx
@@ -1,4176 +1,4176 @@
-/*****************************************************************************/
-/* */
-/* Routines for Arbitrary Precision Floating-point Arithmetic */
-/* and Fast Robust Geometric Predicates */
-/* (predicates.c) */
-/* */
-/* May 18, 1996 */
-/* */
-/* Placed in the public domain by */
-/* Jonathan Richard Shewchuk */
-/* School of Computer Science */
-/* Carnegie Mellon University */
-/* 5000 Forbes Avenue */
-/* Pittsburgh, Pennsylvania 15213-3891 */
-/* jrs@cs.cmu.edu */
-/* */
-/* This file contains C implementation of algorithms for exact addition */
-/* and multiplication of floating-point numbers, and predicates for */
-/* robustly performing the orientation and incircle tests used in */
-/* computational geometry. The algorithms and underlying theory are */
-/* described in Jonathan Richard Shewchuk. "Adaptive Precision Floating- */
-/* Point Arithmetic and Fast Robust Geometric Predicates." Technical */
-/* Report CMU-CS-96-140, School of Computer Science, Carnegie Mellon */
-/* University, Pittsburgh, Pennsylvania, May 1996. (Submitted to */
-/* Discrete & Computational Geometry.) */
-/* */
-/* This file, the paper listed above, and other information are available */
-/* from the Web page http://www.cs.cmu.edu/~quake/robust.html . */
-/* */
-/*****************************************************************************/
-
-/*****************************************************************************/
-/* */
-/* Using this code: */
-/* */
-/* First, read the short or long version of the paper (from the Web page */
-/* above). */
-/* */
-/* Be sure to call exactinit() once, before calling any of the arithmetic */
-/* functions or geometric predicates. Also be sure to turn on the */
-/* optimizer when compiling this file. */
-/* */
-/* */
-/* Several geometric predicates are defined. Their parameters are all */
-/* points. Each point is an array of two or three floating-point */
-/* numbers. The geometric predicates, described in the papers, are */
-/* */
-/* orient2d(pa, pb, pc) */
-/* orient2dfast(pa, pb, pc) */
-/* orient3d(pa, pb, pc, pd) */
-/* orient3dfast(pa, pb, pc, pd) */
-/* incircle(pa, pb, pc, pd) */
-/* incirclefast(pa, pb, pc, pd) */
-/* insphere(pa, pb, pc, pd, pe) */
-/* inspherefast(pa, pb, pc, pd, pe) */
-/* */
-/* Those with suffix "fast" are approximate, non-robust versions. Those */
-/* without the suffix are adaptive precision, robust versions. There */
-/* are also versions with the suffices "exact" and "slow", which are */
-/* non-adaptive, exact arithmetic versions, which I use only for timings */
-/* in my arithmetic papers. */
-/* */
-/* */
-/* An expansion is represented by an array of floating-point numbers, */
-/* sorted from smallest to largest magnitude (possibly with interspersed */
-/* zeros). The length of each expansion is stored as a separate integer, */
-/* and each arithmetic function returns an integer which is the length */
-/* of the expansion it created. */
-/* */
-/* Several arithmetic functions are defined. Their parameters are */
-/* */
-/* e, f Input expansions */
-/* elen, flen Lengths of input expansions (must be >= 1) */
-/* h Output expansion */
-/* b Input scalar */
-/* */
-/* The arithmetic functions are */
-/* */
-/* grow_expansion(elen, e, b, h) */
-/* grow_expansion_zeroelim(elen, e, b, h) */
-/* expansion_sum(elen, e, flen, f, h) */
-/* expansion_sum_zeroelim1(elen, e, flen, f, h) */
-/* expansion_sum_zeroelim2(elen, e, flen, f, h) */
-/* fast_expansion_sum(elen, e, flen, f, h) */
-/* fast_expansion_sum_zeroelim(elen, e, flen, f, h) */
-/* linear_expansion_sum(elen, e, flen, f, h) */
-/* linear_expansion_sum_zeroelim(elen, e, flen, f, h) */
-/* scale_expansion(elen, e, b, h) */
-/* scale_expansion_zeroelim(elen, e, b, h) */
-/* compress(elen, e, h) */
-/* */
-/* All of these are described in the long version of the paper; some are */
-/* described in the short version. All return an integer that is the */
-/* length of h. Those with suffix _zeroelim perform zero elimination, */
-/* and are recommended over their counterparts. The procedure */
-/* fast_expansion_sum_zeroelim() (or linear_expansion_sum_zeroelim() on */
-/* processors that do not use the round-to-even tiebreaking rule) is */
-/* recommended over expansion_sum_zeroelim(). Each procedure has a */
-/* little note next to it (in the code below) that tells you whether or */
-/* not the output expansion may be the same array as one of the input */
-/* expansions. */
-/* */
-/* */
-/* If you look around below, you'll also find macros for a bunch of */
-/* simple unrolled arithmetic operations, and procedures for printing */
-/* expansions (commented out because they don't work with all C */
-/* compilers) and for generating random floating-point numbers whose */
-/* significand bits are all random. Most of the macros have undocumented */
-/* requirements that certain of their parameters should not be the same */
-/* variable; for safety, better to make sure all the parameters are */
-/* distinct variables. Feel free to send email to jrs@cs.cmu.edu if you */
-/* have questions. */
-/* */
-/*****************************************************************************/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <math.h>
-#ifdef CPU86
-#include <float.h>
-#endif /* CPU86 */
-#ifdef LINUX
-#include <fpu_control.h>
-#endif /* LINUX */
-
-#include "tetgen.h" // Defines the symbol REAL (float or double).
-
-/* On some machines, the exact arithmetic routines might be defeated by the */
-/* use of internal extended precision floating-point registers. Sometimes */
-/* this problem can be fixed by defining certain values to be volatile, */
-/* thus forcing them to be stored to memory and rounded off. This isn't */
-/* a great solution, though, as it slows the arithmetic down. */
-/* */
-/* To try this out, write "#define INEXACT volatile" below. Normally, */
-/* however, INEXACT should be defined to be nothing. ("#define INEXACT".) */
-
-#define INEXACT /* Nothing */
-/* #define INEXACT volatile */
-
-/* #define REAL double */ /* float or double */
-#define REALPRINT doubleprint
-#define REALRAND doublerand
-#define NARROWRAND narrowdoublerand
-#define UNIFORMRAND uniformdoublerand
-
-/* Which of the following two methods of finding the absolute values is */
-/* fastest is compiler-dependent. A few compilers can inline and optimize */
-/* the fabs() call; but most will incur the overhead of a function call, */
-/* which is disastrously slow. A faster way on IEEE machines might be to */
-/* mask the appropriate bit, but that's difficult to do in C. */
-
-#define Absolute(a) ((a) >= 0.0 ? (a) : -(a))
-/* #define Absolute(a) fabs(a) */
-
-/* Many of the operations are broken up into two pieces, a main part that */
-/* performs an approximate operation, and a "tail" that computes the */
-/* roundoff error of that operation. */
-/* */
-/* The operations Fast_Two_Sum(), Fast_Two_Diff(), Two_Sum(), Two_Diff(), */
-/* Split(), and Two_Product() are all implemented as described in the */
-/* reference. Each of these macros requires certain variables to be */
-/* defined in the calling routine. The variables `bvirt', `c', `abig', */
-/* `_i', `_j', `_k', `_l', `_m', and `_n' are declared `INEXACT' because */
-/* they store the result of an operation that may incur roundoff error. */
-/* The input parameter `x' (or the highest numbered `x_' parameter) must */
-/* also be declared `INEXACT'. */
-
-#define Fast_Two_Sum_Tail(a, b, x, y) \
- bvirt = x - a; \
- y = b - bvirt
-
-#define Fast_Two_Sum(a, b, x, y) \
- x = (REAL) (a + b); \
- Fast_Two_Sum_Tail(a, b, x, y)
-
-#define Fast_Two_Diff_Tail(a, b, x, y) \
- bvirt = a - x; \
- y = bvirt - b
-
-#define Fast_Two_Diff(a, b, x, y) \
- x = (REAL) (a - b); \
- Fast_Two_Diff_Tail(a, b, x, y)
-
-#define Two_Sum_Tail(a, b, x, y) \
- bvirt = (REAL) (x - a); \
- avirt = x - bvirt; \
- bround = b - bvirt; \
- around = a - avirt; \
- y = around + bround
-
-#define Two_Sum(a, b, x, y) \
- x = (REAL) (a + b); \
- Two_Sum_Tail(a, b, x, y)
-
-#define Two_Diff_Tail(a, b, x, y) \
- bvirt = (REAL) (a - x); \
- avirt = x + bvirt; \
- bround = bvirt - b; \
- around = a - avirt; \
- y = around + bround
-
-#define Two_Diff(a, b, x, y) \
- x = (REAL) (a - b); \
- Two_Diff_Tail(a, b, x, y)
-
-#define Split(a, ahi, alo) \
- c = (REAL) (splitter * a); \
- abig = (REAL) (c - a); \
- ahi = c - abig; \
- alo = a - ahi
-
-#define Two_Product_Tail(a, b, x, y) \
- Split(a, ahi, alo); \
- Split(b, bhi, blo); \
- err1 = x - (ahi * bhi); \
- err2 = err1 - (alo * bhi); \
- err3 = err2 - (ahi * blo); \
- y = (alo * blo) - err3
-
-#define Two_Product(a, b, x, y) \
- x = (REAL) (a * b); \
- Two_Product_Tail(a, b, x, y)
-
-/* Two_Product_Presplit() is Two_Product() where one of the inputs has */
-/* already been split. Avoids redundant splitting. */
-
-#define Two_Product_Presplit(a, b, bhi, blo, x, y) \
- x = (REAL) (a * b); \
- Split(a, ahi, alo); \
- err1 = x - (ahi * bhi); \
- err2 = err1 - (alo * bhi); \
- err3 = err2 - (ahi * blo); \
- y = (alo * blo) - err3
-
-/* Two_Product_2Presplit() is Two_Product() where both of the inputs have */
-/* already been split. Avoids redundant splitting. */
-
-#define Two_Product_2Presplit(a, ahi, alo, b, bhi, blo, x, y) \
- x = (REAL) (a * b); \
- err1 = x - (ahi * bhi); \
- err2 = err1 - (alo * bhi); \
- err3 = err2 - (ahi * blo); \
- y = (alo * blo) - err3
-
-/* Square() can be done more quickly than Two_Product(). */
-
-#define Square_Tail(a, x, y) \
- Split(a, ahi, alo); \
- err1 = x - (ahi * ahi); \
- err3 = err1 - ((ahi + ahi) * alo); \
- y = (alo * alo) - err3
-
-#define Square(a, x, y) \
- x = (REAL) (a * a); \
- Square_Tail(a, x, y)
-
-/* Macros for summing expansions of various fixed lengths. These are all */
-/* unrolled versions of Expansion_Sum(). */
-
-#define Two_One_Sum(a1, a0, b, x2, x1, x0) \
- Two_Sum(a0, b , _i, x0); \
- Two_Sum(a1, _i, x2, x1)
-
-#define Two_One_Diff(a1, a0, b, x2, x1, x0) \
- Two_Diff(a0, b , _i, x0); \
- Two_Sum( a1, _i, x2, x1)
-
-#define Two_Two_Sum(a1, a0, b1, b0, x3, x2, x1, x0) \
- Two_One_Sum(a1, a0, b0, _j, _0, x0); \
- Two_One_Sum(_j, _0, b1, x3, x2, x1)
-
-#define Two_Two_Diff(a1, a0, b1, b0, x3, x2, x1, x0) \
- Two_One_Diff(a1, a0, b0, _j, _0, x0); \
- Two_One_Diff(_j, _0, b1, x3, x2, x1)
-
-#define Four_One_Sum(a3, a2, a1, a0, b, x4, x3, x2, x1, x0) \
- Two_One_Sum(a1, a0, b , _j, x1, x0); \
- Two_One_Sum(a3, a2, _j, x4, x3, x2)
-
-#define Four_Two_Sum(a3, a2, a1, a0, b1, b0, x5, x4, x3, x2, x1, x0) \
- Four_One_Sum(a3, a2, a1, a0, b0, _k, _2, _1, _0, x0); \
- Four_One_Sum(_k, _2, _1, _0, b1, x5, x4, x3, x2, x1)
-
-#define Four_Four_Sum(a3, a2, a1, a0, b4, b3, b1, b0, x7, x6, x5, x4, x3, x2, \
- x1, x0) \
- Four_Two_Sum(a3, a2, a1, a0, b1, b0, _l, _2, _1, _0, x1, x0); \
- Four_Two_Sum(_l, _2, _1, _0, b4, b3, x7, x6, x5, x4, x3, x2)
-
-#define Eight_One_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b, x8, x7, x6, x5, x4, \
- x3, x2, x1, x0) \
- Four_One_Sum(a3, a2, a1, a0, b , _j, x3, x2, x1, x0); \
- Four_One_Sum(a7, a6, a5, a4, _j, x8, x7, x6, x5, x4)
-
-#define Eight_Two_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b1, b0, x9, x8, x7, \
- x6, x5, x4, x3, x2, x1, x0) \
- Eight_One_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b0, _k, _6, _5, _4, _3, _2, \
- _1, _0, x0); \
- Eight_One_Sum(_k, _6, _5, _4, _3, _2, _1, _0, b1, x9, x8, x7, x6, x5, x4, \
- x3, x2, x1)
-
-#define Eight_Four_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b4, b3, b1, b0, x11, \
- x10, x9, x8, x7, x6, x5, x4, x3, x2, x1, x0) \
- Eight_Two_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b1, b0, _l, _6, _5, _4, _3, \
- _2, _1, _0, x1, x0); \
- Eight_Two_Sum(_l, _6, _5, _4, _3, _2, _1, _0, b4, b3, x11, x10, x9, x8, \
- x7, x6, x5, x4, x3, x2)
-
-/* Macros for multiplying expansions of various fixed lengths. */
-
-#define Two_One_Product(a1, a0, b, x3, x2, x1, x0) \
- Split(b, bhi, blo); \
- Two_Product_Presplit(a0, b, bhi, blo, _i, x0); \
- Two_Product_Presplit(a1, b, bhi, blo, _j, _0); \
- Two_Sum(_i, _0, _k, x1); \
- Fast_Two_Sum(_j, _k, x3, x2)
-
-#define Four_One_Product(a3, a2, a1, a0, b, x7, x6, x5, x4, x3, x2, x1, x0) \
- Split(b, bhi, blo); \
- Two_Product_Presplit(a0, b, bhi, blo, _i, x0); \
- Two_Product_Presplit(a1, b, bhi, blo, _j, _0); \
- Two_Sum(_i, _0, _k, x1); \
- Fast_Two_Sum(_j, _k, _i, x2); \
- Two_Product_Presplit(a2, b, bhi, blo, _j, _0); \
- Two_Sum(_i, _0, _k, x3); \
- Fast_Two_Sum(_j, _k, _i, x4); \
- Two_Product_Presplit(a3, b, bhi, blo, _j, _0); \
- Two_Sum(_i, _0, _k, x5); \
- Fast_Two_Sum(_j, _k, x7, x6)
-
-#define Two_Two_Product(a1, a0, b1, b0, x7, x6, x5, x4, x3, x2, x1, x0) \
- Split(a0, a0hi, a0lo); \
- Split(b0, bhi, blo); \
- Two_Product_2Presplit(a0, a0hi, a0lo, b0, bhi, blo, _i, x0); \
- Split(a1, a1hi, a1lo); \
- Two_Product_2Presplit(a1, a1hi, a1lo, b0, bhi, blo, _j, _0); \
- Two_Sum(_i, _0, _k, _1); \
- Fast_Two_Sum(_j, _k, _l, _2); \
- Split(b1, bhi, blo); \
- Two_Product_2Presplit(a0, a0hi, a0lo, b1, bhi, blo, _i, _0); \
- Two_Sum(_1, _0, _k, x1); \
- Two_Sum(_2, _k, _j, _1); \
- Two_Sum(_l, _j, _m, _2); \
- Two_Product_2Presplit(a1, a1hi, a1lo, b1, bhi, blo, _j, _0); \
- Two_Sum(_i, _0, _n, _0); \
- Two_Sum(_1, _0, _i, x2); \
- Two_Sum(_2, _i, _k, _1); \
- Two_Sum(_m, _k, _l, _2); \
- Two_Sum(_j, _n, _k, _0); \
- Two_Sum(_1, _0, _j, x3); \
- Two_Sum(_2, _j, _i, _1); \
- Two_Sum(_l, _i, _m, _2); \
- Two_Sum(_1, _k, _i, x4); \
- Two_Sum(_2, _i, _k, x5); \
- Two_Sum(_m, _k, x7, x6)
-
-/* An expansion of length two can be squared more quickly than finding the */
-/* product of two different expansions of length two, and the result is */
-/* guaranteed to have no more than six (rather than eight) components. */
-
-#define Two_Square(a1, a0, x5, x4, x3, x2, x1, x0) \
- Square(a0, _j, x0); \
- _0 = a0 + a0; \
- Two_Product(a1, _0, _k, _1); \
- Two_One_Sum(_k, _1, _j, _l, _2, x1); \
- Square(a1, _j, _1); \
- Two_Two_Sum(_j, _1, _l, _2, x5, x4, x3, x2)
-
-/* splitter = 2^ceiling(p / 2) + 1. Used to split floats in half. */
-static REAL splitter;
-static REAL epsilon; /* = 2^(-p). Used to estimate roundoff errors. */
-/* A set of coefficients used to calculate maximum roundoff errors. */
-static REAL resulterrbound;
-static REAL ccwerrboundA, ccwerrboundB, ccwerrboundC;
-static REAL o3derrboundA, o3derrboundB, o3derrboundC;
-static REAL iccerrboundA, iccerrboundB, iccerrboundC;
-static REAL isperrboundA, isperrboundB, isperrboundC;
-
-/*****************************************************************************/
-/* */
-/* doubleprint() Print the bit representation of a double. */
-/* */
-/* Useful for debugging exact arithmetic routines. */
-/* */
-/*****************************************************************************/
-
-/*
-void doubleprint(number)
-double number;
-{
- unsigned long long no;
- unsigned long long sign, expo;
- int exponent;
- int i, bottomi;
-
- no = *(unsigned long long *) &number;
- sign = no & 0x8000000000000000ll;
- expo = (no >> 52) & 0x7ffll;
- exponent = (int) expo;
- exponent = exponent - 1023;
- if (sign) {
- printf("-");
- } else {
- printf(" ");
- }
- if (exponent == -1023) {
- printf(
- "0.0000000000000000000000000000000000000000000000000000_ ( )");
- } else {
- printf("1.");
- bottomi = -1;
- for (i = 0; i < 52; i++) {
- if (no & 0x0008000000000000ll) {
- printf("1");
- bottomi = i;
- } else {
- printf("0");
- }
- no <<= 1;
- }
- printf("_%d (%d)", exponent, exponent - 1 - bottomi);
- }
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* floatprint() Print the bit representation of a float. */
-/* */
-/* Useful for debugging exact arithmetic routines. */
-/* */
-/*****************************************************************************/
-
-/*
-void floatprint(number)
-float number;
-{
- unsigned no;
- unsigned sign, expo;
- int exponent;
- int i, bottomi;
-
- no = *(unsigned *) &number;
- sign = no & 0x80000000;
- expo = (no >> 23) & 0xff;
- exponent = (int) expo;
- exponent = exponent - 127;
- if (sign) {
- printf("-");
- } else {
- printf(" ");
- }
- if (exponent == -127) {
- printf("0.00000000000000000000000_ ( )");
- } else {
- printf("1.");
- bottomi = -1;
- for (i = 0; i < 23; i++) {
- if (no & 0x00400000) {
- printf("1");
- bottomi = i;
- } else {
- printf("0");
- }
- no <<= 1;
- }
- printf("_%3d (%3d)", exponent, exponent - 1 - bottomi);
- }
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* expansion_print() Print the bit representation of an expansion. */
-/* */
-/* Useful for debugging exact arithmetic routines. */
-/* */
-/*****************************************************************************/
-
-/*
-void expansion_print(elen, e)
-int elen;
-REAL *e;
-{
- int i;
-
- for (i = elen - 1; i >= 0; i--) {
- REALPRINT(e[i]);
- if (i > 0) {
- printf(" +\n");
- } else {
- printf("\n");
- }
- }
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* doublerand() Generate a double with random 53-bit significand and a */
-/* random exponent in [0, 511]. */
-/* */
-/*****************************************************************************/
-
-/*
-double doublerand()
-{
- double result;
- double expo;
- long a, b, c;
- long i;
-
- a = random();
- b = random();
- c = random();
- result = (double) (a - 1073741824) * 8388608.0 + (double) (b >> 8);
- for (i = 512, expo = 2; i <= 131072; i *= 2, expo = expo * expo) {
- if (c & i) {
- result *= expo;
- }
- }
- return result;
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* narrowdoublerand() Generate a double with random 53-bit significand */
-/* and a random exponent in [0, 7]. */
-/* */
-/*****************************************************************************/
-
-/*
-double narrowdoublerand()
-{
- double result;
- double expo;
- long a, b, c;
- long i;
-
- a = random();
- b = random();
- c = random();
- result = (double) (a - 1073741824) * 8388608.0 + (double) (b >> 8);
- for (i = 512, expo = 2; i <= 2048; i *= 2, expo = expo * expo) {
- if (c & i) {
- result *= expo;
- }
- }
- return result;
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* uniformdoublerand() Generate a double with random 53-bit significand. */
-/* */
-/*****************************************************************************/
-
-/*
-double uniformdoublerand()
-{
- double result;
- long a, b;
-
- a = random();
- b = random();
- result = (double) (a - 1073741824) * 8388608.0 + (double) (b >> 8);
- return result;
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* floatrand() Generate a float with random 24-bit significand and a */
-/* random exponent in [0, 63]. */
-/* */
-/*****************************************************************************/
-
-/*
-float floatrand()
-{
- float result;
- float expo;
- long a, c;
- long i;
-
- a = random();
- c = random();
- result = (float) ((a - 1073741824) >> 6);
- for (i = 512, expo = 2; i <= 16384; i *= 2, expo = expo * expo) {
- if (c & i) {
- result *= expo;
- }
- }
- return result;
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* narrowfloatrand() Generate a float with random 24-bit significand and */
-/* a random exponent in [0, 7]. */
-/* */
-/*****************************************************************************/
-
-/*
-float narrowfloatrand()
-{
- float result;
- float expo;
- long a, c;
- long i;
-
- a = random();
- c = random();
- result = (float) ((a - 1073741824) >> 6);
- for (i = 512, expo = 2; i <= 2048; i *= 2, expo = expo * expo) {
- if (c & i) {
- result *= expo;
- }
- }
- return result;
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* uniformfloatrand() Generate a float with random 24-bit significand. */
-/* */
-/*****************************************************************************/
-
-/*
-float uniformfloatrand()
-{
- float result;
- long a;
-
- a = random();
- result = (float) ((a - 1073741824) >> 6);
- return result;
-}
-*/
-
-/*****************************************************************************/
-/* */
-/* exactinit() Initialize the variables used for exact arithmetic. */
-/* */
-/* `epsilon' is the largest power of two such that 1.0 + epsilon = 1.0 in */
-/* floating-point arithmetic. `epsilon' bounds the relative roundoff */
-/* error. It is used for floating-point error analysis. */
-/* */
-/* `splitter' is used to split floating-point numbers into two half- */
-/* length significands for exact multiplication. */
-/* */
-/* I imagine that a highly optimizing compiler might be too smart for its */
-/* own good, and somehow cause this routine to fail, if it pretends that */
-/* floating-point arithmetic is too much like real arithmetic. */
-/* */
-/* Don't change this routine unless you fully understand it. */
-/* */
-/*****************************************************************************/
-
-REAL exactinit()
-{
- REAL half;
- REAL check, lastcheck;
- int every_other;
-#ifdef LINUX
- int cword;
-#endif /* LINUX */
-
-#ifdef CPU86
-#ifdef SINGLE
- _control87(_PC_24, _MCW_PC); /* Set FPU control word for single precision. */
-#else /* not SINGLE */
- _control87(_PC_53, _MCW_PC); /* Set FPU control word for double precision. */
-#endif /* not SINGLE */
-#endif /* CPU86 */
-#ifdef LINUX
-#ifdef SINGLE
- /* cword = 4223; */
- cword = 4210; /* set FPU control word for single precision */
-#else /* not SINGLE */
- /* cword = 4735; */
- cword = 4722; /* set FPU control word for double precision */
-#endif /* not SINGLE */
- _FPU_SETCW(cword);
-#endif /* LINUX */
-
- every_other = 1;
- half = 0.5;
- epsilon = 1.0;
- splitter = 1.0;
- check = 1.0;
- /* Repeatedly divide `epsilon' by two until it is too small to add to */
- /* one without causing roundoff. (Also check if the sum is equal to */
- /* the previous sum, for machines that round up instead of using exact */
- /* rounding. Not that this library will work on such machines anyway. */
- do {
- lastcheck = check;
- epsilon *= half;
- if (every_other) {
- splitter *= 2.0;
- }
- every_other = !every_other;
- check = 1.0 + epsilon;
- } while ((check != 1.0) && (check != lastcheck));
- splitter += 1.0;
-
- /* Error bounds for orientation and incircle tests. */
- resulterrbound = (3.0 + 8.0 * epsilon) * epsilon;
- ccwerrboundA = (3.0 + 16.0 * epsilon) * epsilon;
- ccwerrboundB = (2.0 + 12.0 * epsilon) * epsilon;
- ccwerrboundC = (9.0 + 64.0 * epsilon) * epsilon * epsilon;
- o3derrboundA = (7.0 + 56.0 * epsilon) * epsilon;
- o3derrboundB = (3.0 + 28.0 * epsilon) * epsilon;
- o3derrboundC = (26.0 + 288.0 * epsilon) * epsilon * epsilon;
- iccerrboundA = (10.0 + 96.0 * epsilon) * epsilon;
- iccerrboundB = (4.0 + 48.0 * epsilon) * epsilon;
- iccerrboundC = (44.0 + 576.0 * epsilon) * epsilon * epsilon;
- isperrboundA = (16.0 + 224.0 * epsilon) * epsilon;
- isperrboundB = (5.0 + 72.0 * epsilon) * epsilon;
- isperrboundC = (71.0 + 1408.0 * epsilon) * epsilon * epsilon;
-
- return epsilon; /* Added by H. Si 30 Juli, 2004. */
-}
-
-/*****************************************************************************/
-/* */
-/* grow_expansion() Add a scalar to an expansion. */
-/* */
-/* Sets h = e + b. See the long version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
-/* properties as well. (That is, if e has one of these properties, so */
-/* will h.) */
-/* */
-/*****************************************************************************/
-
-int grow_expansion(int elen, REAL *e, REAL b, REAL *h)
-/* e and h can be the same. */
-{
- REAL Q;
- INEXACT REAL Qnew;
- int eindex;
- REAL enow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
-
- Q = b;
- for (eindex = 0; eindex < elen; eindex++) {
- enow = e[eindex];
- Two_Sum(Q, enow, Qnew, h[eindex]);
- Q = Qnew;
- }
- h[eindex] = Q;
- return eindex + 1;
-}
-
-/*****************************************************************************/
-/* */
-/* grow_expansion_zeroelim() Add a scalar to an expansion, eliminating */
-/* zero components from the output expansion. */
-/* */
-/* Sets h = e + b. See the long version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
-/* properties as well. (That is, if e has one of these properties, so */
-/* will h.) */
-/* */
-/*****************************************************************************/
-
-int grow_expansion_zeroelim(int elen, REAL *e, REAL b, REAL *h)
-/* e and h can be the same. */
-{
- REAL Q, hh;
- INEXACT REAL Qnew;
- int eindex, hindex;
- REAL enow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
-
- hindex = 0;
- Q = b;
- for (eindex = 0; eindex < elen; eindex++) {
- enow = e[eindex];
- Two_Sum(Q, enow, Qnew, hh);
- Q = Qnew;
- if (hh != 0.0) {
- h[hindex++] = hh;
- }
- }
- if ((Q != 0.0) || (hindex == 0)) {
- h[hindex++] = Q;
- }
- return hindex;
-}
-
-/*****************************************************************************/
-/* */
-/* expansion_sum() Sum two expansions. */
-/* */
-/* Sets h = e + f. See the long version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the nonadjacent property as well. (That is, */
-/* if e has one of these properties, so will h.) Does NOT maintain the */
-/* strongly nonoverlapping property. */
-/* */
-/*****************************************************************************/
-
-int expansion_sum(int elen, REAL *e, int flen, REAL *f, REAL *h)
-/* e and h can be the same, but f and h cannot. */
-{
- REAL Q;
- INEXACT REAL Qnew;
- int findex, hindex, hlast;
- REAL hnow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
-
- Q = f[0];
- for (hindex = 0; hindex < elen; hindex++) {
- hnow = e[hindex];
- Two_Sum(Q, hnow, Qnew, h[hindex]);
- Q = Qnew;
- }
- h[hindex] = Q;
- hlast = hindex;
- for (findex = 1; findex < flen; findex++) {
- Q = f[findex];
- for (hindex = findex; hindex <= hlast; hindex++) {
- hnow = h[hindex];
- Two_Sum(Q, hnow, Qnew, h[hindex]);
- Q = Qnew;
- }
- h[++hlast] = Q;
- }
- return hlast + 1;
-}
-
-/*****************************************************************************/
-/* */
-/* expansion_sum_zeroelim1() Sum two expansions, eliminating zero */
-/* components from the output expansion. */
-/* */
-/* Sets h = e + f. See the long version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the nonadjacent property as well. (That is, */
-/* if e has one of these properties, so will h.) Does NOT maintain the */
-/* strongly nonoverlapping property. */
-/* */
-/*****************************************************************************/
-
-int expansion_sum_zeroelim1(int elen, REAL *e, int flen, REAL *f, REAL *h)
-/* e and h can be the same, but f and h cannot. */
-{
- REAL Q;
- INEXACT REAL Qnew;
- int index, findex, hindex, hlast;
- REAL hnow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
-
- Q = f[0];
- for (hindex = 0; hindex < elen; hindex++) {
- hnow = e[hindex];
- Two_Sum(Q, hnow, Qnew, h[hindex]);
- Q = Qnew;
- }
- h[hindex] = Q;
- hlast = hindex;
- for (findex = 1; findex < flen; findex++) {
- Q = f[findex];
- for (hindex = findex; hindex <= hlast; hindex++) {
- hnow = h[hindex];
- Two_Sum(Q, hnow, Qnew, h[hindex]);
- Q = Qnew;
- }
- h[++hlast] = Q;
- }
- hindex = -1;
- for (index = 0; index <= hlast; index++) {
- hnow = h[index];
- if (hnow != 0.0) {
- h[++hindex] = hnow;
- }
- }
- if (hindex == -1) {
- return 1;
- } else {
- return hindex + 1;
- }
-}
-
-/*****************************************************************************/
-/* */
-/* expansion_sum_zeroelim2() Sum two expansions, eliminating zero */
-/* components from the output expansion. */
-/* */
-/* Sets h = e + f. See the long version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the nonadjacent property as well. (That is, */
-/* if e has one of these properties, so will h.) Does NOT maintain the */
-/* strongly nonoverlapping property. */
-/* */
-/*****************************************************************************/
-
-int expansion_sum_zeroelim2(int elen, REAL *e, int flen, REAL *f, REAL *h)
-/* e and h can be the same, but f and h cannot. */
-{
- REAL Q, hh;
- INEXACT REAL Qnew;
- int eindex, findex, hindex, hlast;
- REAL enow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
-
- hindex = 0;
- Q = f[0];
- for (eindex = 0; eindex < elen; eindex++) {
- enow = e[eindex];
- Two_Sum(Q, enow, Qnew, hh);
- Q = Qnew;
- if (hh != 0.0) {
- h[hindex++] = hh;
- }
- }
- h[hindex] = Q;
- hlast = hindex;
- for (findex = 1; findex < flen; findex++) {
- hindex = 0;
- Q = f[findex];
- for (eindex = 0; eindex <= hlast; eindex++) {
- enow = h[eindex];
- Two_Sum(Q, enow, Qnew, hh);
- Q = Qnew;
- if (hh != 0) {
- h[hindex++] = hh;
- }
- }
- h[hindex] = Q;
- hlast = hindex;
- }
- return hlast + 1;
-}
-
-/*****************************************************************************/
-/* */
-/* fast_expansion_sum() Sum two expansions. */
-/* */
-/* Sets h = e + f. See the long version of my paper for details. */
-/* */
-/* If round-to-even is used (as with IEEE 754), maintains the strongly */
-/* nonoverlapping property. (That is, if e is strongly nonoverlapping, h */
-/* will be also.) Does NOT maintain the nonoverlapping or nonadjacent */
-/* properties. */
-/* */
-/*****************************************************************************/
-
-int fast_expansion_sum(int elen, REAL *e, int flen, REAL *f, REAL *h)
-/* h cannot be e or f. */
-{
- REAL Q;
- INEXACT REAL Qnew;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- int eindex, findex, hindex;
- REAL enow, fnow;
-
- enow = e[0];
- fnow = f[0];
- eindex = findex = 0;
- if ((fnow > enow) == (fnow > -enow)) {
- Q = enow;
- enow = e[++eindex];
- } else {
- Q = fnow;
- fnow = f[++findex];
- }
- hindex = 0;
- if ((eindex < elen) && (findex < flen)) {
- if ((fnow > enow) == (fnow > -enow)) {
- Fast_Two_Sum(enow, Q, Qnew, h[0]);
- enow = e[++eindex];
- } else {
- Fast_Two_Sum(fnow, Q, Qnew, h[0]);
- fnow = f[++findex];
- }
- Q = Qnew;
- hindex = 1;
- while ((eindex < elen) && (findex < flen)) {
- if ((fnow > enow) == (fnow > -enow)) {
- Two_Sum(Q, enow, Qnew, h[hindex]);
- enow = e[++eindex];
- } else {
- Two_Sum(Q, fnow, Qnew, h[hindex]);
- fnow = f[++findex];
- }
- Q = Qnew;
- hindex++;
- }
- }
- while (eindex < elen) {
- Two_Sum(Q, enow, Qnew, h[hindex]);
- enow = e[++eindex];
- Q = Qnew;
- hindex++;
- }
- while (findex < flen) {
- Two_Sum(Q, fnow, Qnew, h[hindex]);
- fnow = f[++findex];
- Q = Qnew;
- hindex++;
- }
- h[hindex] = Q;
- return hindex + 1;
-}
-
-/*****************************************************************************/
-/* */
-/* fast_expansion_sum_zeroelim() Sum two expansions, eliminating zero */
-/* components from the output expansion. */
-/* */
-/* Sets h = e + f. See the long version of my paper for details. */
-/* */
-/* If round-to-even is used (as with IEEE 754), maintains the strongly */
-/* nonoverlapping property. (That is, if e is strongly nonoverlapping, h */
-/* will be also.) Does NOT maintain the nonoverlapping or nonadjacent */
-/* properties. */
-/* */
-/*****************************************************************************/
-
-int fast_expansion_sum_zeroelim(int elen, REAL *e, int flen, REAL *f, REAL *h)
-/* h cannot be e or f. */
-{
- REAL Q;
- INEXACT REAL Qnew;
- INEXACT REAL hh;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- int eindex, findex, hindex;
- REAL enow, fnow;
-
- enow = e[0];
- fnow = f[0];
- eindex = findex = 0;
- if ((fnow > enow) == (fnow > -enow)) {
- Q = enow;
- enow = e[++eindex];
- } else {
- Q = fnow;
- fnow = f[++findex];
- }
- hindex = 0;
- if ((eindex < elen) && (findex < flen)) {
- if ((fnow > enow) == (fnow > -enow)) {
- Fast_Two_Sum(enow, Q, Qnew, hh);
- enow = e[++eindex];
- } else {
- Fast_Two_Sum(fnow, Q, Qnew, hh);
- fnow = f[++findex];
- }
- Q = Qnew;
- if (hh != 0.0) {
- h[hindex++] = hh;
- }
- while ((eindex < elen) && (findex < flen)) {
- if ((fnow > enow) == (fnow > -enow)) {
- Two_Sum(Q, enow, Qnew, hh);
- enow = e[++eindex];
- } else {
- Two_Sum(Q, fnow, Qnew, hh);
- fnow = f[++findex];
- }
- Q = Qnew;
- if (hh != 0.0) {
- h[hindex++] = hh;
- }
- }
- }
- while (eindex < elen) {
- Two_Sum(Q, enow, Qnew, hh);
- enow = e[++eindex];
- Q = Qnew;
- if (hh != 0.0) {
- h[hindex++] = hh;
- }
- }
- while (findex < flen) {
- Two_Sum(Q, fnow, Qnew, hh);
- fnow = f[++findex];
- Q = Qnew;
- if (hh != 0.0) {
- h[hindex++] = hh;
- }
- }
- if ((Q != 0.0) || (hindex == 0)) {
- h[hindex++] = Q;
- }
- return hindex;
-}
-
-/*****************************************************************************/
-/* */
-/* linear_expansion_sum() Sum two expansions. */
-/* */
-/* Sets h = e + f. See either version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. (That is, if e is */
-/* nonoverlapping, h will be also.) */
-/* */
-/*****************************************************************************/
-
-int linear_expansion_sum(int elen, REAL *e, int flen, REAL *f, REAL *h)
-/* h cannot be e or f. */
-{
- REAL Q, q;
- INEXACT REAL Qnew;
- INEXACT REAL R;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- int eindex, findex, hindex;
- REAL enow, fnow;
- REAL g0;
-
- enow = e[0];
- fnow = f[0];
- eindex = findex = 0;
- if ((fnow > enow) == (fnow > -enow)) {
- g0 = enow;
- enow = e[++eindex];
- } else {
- g0 = fnow;
- fnow = f[++findex];
- }
- if ((eindex < elen) && ((findex >= flen)
- || ((fnow > enow) == (fnow > -enow)))) {
- Fast_Two_Sum(enow, g0, Qnew, q);
- enow = e[++eindex];
- } else {
- Fast_Two_Sum(fnow, g0, Qnew, q);
- fnow = f[++findex];
- }
- Q = Qnew;
- for (hindex = 0; hindex < elen + flen - 2; hindex++) {
- if ((eindex < elen) && ((findex >= flen)
- || ((fnow > enow) == (fnow > -enow)))) {
- Fast_Two_Sum(enow, q, R, h[hindex]);
- enow = e[++eindex];
- } else {
- Fast_Two_Sum(fnow, q, R, h[hindex]);
- fnow = f[++findex];
- }
- Two_Sum(Q, R, Qnew, q);
- Q = Qnew;
- }
- h[hindex] = q;
- h[hindex + 1] = Q;
- return hindex + 2;
-}
-
-/*****************************************************************************/
-/* */
-/* linear_expansion_sum_zeroelim() Sum two expansions, eliminating zero */
-/* components from the output expansion. */
-/* */
-/* Sets h = e + f. See either version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. (That is, if e is */
-/* nonoverlapping, h will be also.) */
-/* */
-/*****************************************************************************/
-
-int linear_expansion_sum_zeroelim(int elen, REAL *e, int flen, REAL *f,
- REAL *h)
-/* h cannot be e or f. */
-{
- REAL Q, q, hh;
- INEXACT REAL Qnew;
- INEXACT REAL R;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- int eindex, findex, hindex;
- int count;
- REAL enow, fnow;
- REAL g0;
-
- enow = e[0];
- fnow = f[0];
- eindex = findex = 0;
- hindex = 0;
- if ((fnow > enow) == (fnow > -enow)) {
- g0 = enow;
- enow = e[++eindex];
- } else {
- g0 = fnow;
- fnow = f[++findex];
- }
- if ((eindex < elen) && ((findex >= flen)
- || ((fnow > enow) == (fnow > -enow)))) {
- Fast_Two_Sum(enow, g0, Qnew, q);
- enow = e[++eindex];
- } else {
- Fast_Two_Sum(fnow, g0, Qnew, q);
- fnow = f[++findex];
- }
- Q = Qnew;
- for (count = 2; count < elen + flen; count++) {
- if ((eindex < elen) && ((findex >= flen)
- || ((fnow > enow) == (fnow > -enow)))) {
- Fast_Two_Sum(enow, q, R, hh);
- enow = e[++eindex];
- } else {
- Fast_Two_Sum(fnow, q, R, hh);
- fnow = f[++findex];
- }
- Two_Sum(Q, R, Qnew, q);
- Q = Qnew;
- if (hh != 0) {
- h[hindex++] = hh;
- }
- }
- if (q != 0) {
- h[hindex++] = q;
- }
- if ((Q != 0.0) || (hindex == 0)) {
- h[hindex++] = Q;
- }
- return hindex;
-}
-
-/*****************************************************************************/
-/* */
-/* scale_expansion() Multiply an expansion by a scalar. */
-/* */
-/* Sets h = be. See either version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
-/* properties as well. (That is, if e has one of these properties, so */
-/* will h.) */
-/* */
-/*****************************************************************************/
-
-int scale_expansion(int elen, REAL *e, REAL b, REAL *h)
-/* e and h cannot be the same. */
-{
- INEXACT REAL Q;
- INEXACT REAL sum;
- INEXACT REAL product1;
- REAL product0;
- int eindex, hindex;
- REAL enow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
-
- Split(b, bhi, blo);
- Two_Product_Presplit(e[0], b, bhi, blo, Q, h[0]);
- hindex = 1;
- for (eindex = 1; eindex < elen; eindex++) {
- enow = e[eindex];
- Two_Product_Presplit(enow, b, bhi, blo, product1, product0);
- Two_Sum(Q, product0, sum, h[hindex]);
- hindex++;
- Two_Sum(product1, sum, Q, h[hindex]);
- hindex++;
- }
- h[hindex] = Q;
- return elen + elen;
-}
-
-/*****************************************************************************/
-/* */
-/* scale_expansion_zeroelim() Multiply an expansion by a scalar, */
-/* eliminating zero components from the */
-/* output expansion. */
-/* */
-/* Sets h = be. See either version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
-/* properties as well. (That is, if e has one of these properties, so */
-/* will h.) */
-/* */
-/*****************************************************************************/
-
-int scale_expansion_zeroelim(int elen, REAL *e, REAL b, REAL *h)
-/* e and h cannot be the same. */
-{
- INEXACT REAL Q, sum;
- REAL hh;
- INEXACT REAL product1;
- REAL product0;
- int eindex, hindex;
- REAL enow;
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
-
- Split(b, bhi, blo);
- Two_Product_Presplit(e[0], b, bhi, blo, Q, hh);
- hindex = 0;
- if (hh != 0) {
- h[hindex++] = hh;
- }
- for (eindex = 1; eindex < elen; eindex++) {
- enow = e[eindex];
- Two_Product_Presplit(enow, b, bhi, blo, product1, product0);
- Two_Sum(Q, product0, sum, hh);
- if (hh != 0) {
- h[hindex++] = hh;
- }
- Fast_Two_Sum(product1, sum, Q, hh);
- if (hh != 0) {
- h[hindex++] = hh;
- }
- }
- if ((Q != 0.0) || (hindex == 0)) {
- h[hindex++] = Q;
- }
- return hindex;
-}
-
-/*****************************************************************************/
-/* */
-/* compress() Compress an expansion. */
-/* */
-/* See the long version of my paper for details. */
-/* */
-/* Maintains the nonoverlapping property. If round-to-even is used (as */
-/* with IEEE 754), then any nonoverlapping expansion is converted to a */
-/* nonadjacent expansion. */
-/* */
-/*****************************************************************************/
-
-int compress(int elen, REAL *e, REAL *h)
-/* e and h may be the same. */
-{
- REAL Q, q;
- INEXACT REAL Qnew;
- int eindex, hindex;
- INEXACT REAL bvirt;
- REAL enow, hnow;
- int top, bottom;
-
- bottom = elen - 1;
- Q = e[bottom];
- for (eindex = elen - 2; eindex >= 0; eindex--) {
- enow = e[eindex];
- Fast_Two_Sum(Q, enow, Qnew, q);
- if (q != 0) {
- h[bottom--] = Qnew;
- Q = q;
- } else {
- Q = Qnew;
- }
- }
- top = 0;
- for (hindex = bottom + 1; hindex < elen; hindex++) {
- hnow = h[hindex];
- Fast_Two_Sum(hnow, Q, Qnew, q);
- if (q != 0) {
- h[top++] = q;
- }
- Q = Qnew;
- }
- h[top] = Q;
- return top + 1;
-}
-
-/*****************************************************************************/
-/* */
-/* estimate() Produce a one-word estimate of an expansion's value. */
-/* */
-/* See either version of my paper for details. */
-/* */
-/*****************************************************************************/
-
-REAL estimate(int elen, REAL *e)
-{
- REAL Q;
- int eindex;
-
- Q = e[0];
- for (eindex = 1; eindex < elen; eindex++) {
- Q += e[eindex];
- }
- return Q;
-}
-
-/*****************************************************************************/
-/* */
-/* orient2dfast() Approximate 2D orientation test. Nonrobust. */
-/* orient2dexact() Exact 2D orientation test. Robust. */
-/* orient2dslow() Another exact 2D orientation test. Robust. */
-/* orient2d() Adaptive exact 2D orientation test. Robust. */
-/* */
-/* Return a positive value if the points pa, pb, and pc occur */
-/* in counterclockwise order; a negative value if they occur */
-/* in clockwise order; and zero if they are collinear. The */
-/* result is also a rough approximation of twice the signed */
-/* area of the triangle defined by the three points. */
-/* */
-/* Only the first and last routine should be used; the middle two are for */
-/* timings. */
-/* */
-/* The last three use exact arithmetic to ensure a correct answer. The */
-/* result returned is the determinant of a matrix. In orient2d() only, */
-/* this determinant is computed adaptively, in the sense that exact */
-/* arithmetic is used only to the degree it is needed to ensure that the */
-/* returned value has the correct sign. Hence, orient2d() is usually quite */
-/* fast, but will run more slowly when the input points are collinear or */
-/* nearly so. */
-/* */
-/*****************************************************************************/
-
-REAL orient2dfast(REAL *pa, REAL *pb, REAL *pc)
-{
- REAL acx, bcx, acy, bcy;
-
- acx = pa[0] - pc[0];
- bcx = pb[0] - pc[0];
- acy = pa[1] - pc[1];
- bcy = pb[1] - pc[1];
- return acx * bcy - acy * bcx;
-}
-
-REAL orient2dexact(REAL *pa, REAL *pb, REAL *pc)
-{
- INEXACT REAL axby1, axcy1, bxcy1, bxay1, cxay1, cxby1;
- REAL axby0, axcy0, bxcy0, bxay0, cxay0, cxby0;
- REAL aterms[4], bterms[4], cterms[4];
- INEXACT REAL aterms3, bterms3, cterms3;
- REAL v[8], w[12];
- int vlength, wlength;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- Two_Product(pa[0], pb[1], axby1, axby0);
- Two_Product(pa[0], pc[1], axcy1, axcy0);
- Two_Two_Diff(axby1, axby0, axcy1, axcy0,
- aterms3, aterms[2], aterms[1], aterms[0]);
- aterms[3] = aterms3;
-
- Two_Product(pb[0], pc[1], bxcy1, bxcy0);
- Two_Product(pb[0], pa[1], bxay1, bxay0);
- Two_Two_Diff(bxcy1, bxcy0, bxay1, bxay0,
- bterms3, bterms[2], bterms[1], bterms[0]);
- bterms[3] = bterms3;
-
- Two_Product(pc[0], pa[1], cxay1, cxay0);
- Two_Product(pc[0], pb[1], cxby1, cxby0);
- Two_Two_Diff(cxay1, cxay0, cxby1, cxby0,
- cterms3, cterms[2], cterms[1], cterms[0]);
- cterms[3] = cterms3;
-
- vlength = fast_expansion_sum_zeroelim(4, aterms, 4, bterms, v);
- wlength = fast_expansion_sum_zeroelim(vlength, v, 4, cterms, w);
-
- return w[wlength - 1];
-}
-
-REAL orient2dslow(REAL *pa, REAL *pb, REAL *pc)
-{
- INEXACT REAL acx, acy, bcx, bcy;
- REAL acxtail, acytail;
- REAL bcxtail, bcytail;
- REAL negate, negatetail;
- REAL axby[8], bxay[8];
- INEXACT REAL axby7, bxay7;
- REAL deter[16];
- int deterlen;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j, _k, _l, _m, _n;
- REAL _0, _1, _2;
-
- Two_Diff(pa[0], pc[0], acx, acxtail);
- Two_Diff(pa[1], pc[1], acy, acytail);
- Two_Diff(pb[0], pc[0], bcx, bcxtail);
- Two_Diff(pb[1], pc[1], bcy, bcytail);
-
- Two_Two_Product(acx, acxtail, bcy, bcytail,
- axby7, axby[6], axby[5], axby[4],
- axby[3], axby[2], axby[1], axby[0]);
- axby[7] = axby7;
- negate = -acy;
- negatetail = -acytail;
- Two_Two_Product(bcx, bcxtail, negate, negatetail,
- bxay7, bxay[6], bxay[5], bxay[4],
- bxay[3], bxay[2], bxay[1], bxay[0]);
- bxay[7] = bxay7;
-
- deterlen = fast_expansion_sum_zeroelim(8, axby, 8, bxay, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL orient2dadapt(REAL *pa, REAL *pb, REAL *pc, REAL detsum)
-{
- INEXACT REAL acx, acy, bcx, bcy;
- REAL acxtail, acytail, bcxtail, bcytail;
- INEXACT REAL detleft, detright;
- REAL detlefttail, detrighttail;
- REAL det, errbound;
- REAL B[4], C1[8], C2[12], D[16];
- INEXACT REAL B3;
- int C1length, C2length, Dlength;
- REAL u[4];
- INEXACT REAL u3;
- INEXACT REAL s1, t1;
- REAL s0, t0;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- acx = (REAL) (pa[0] - pc[0]);
- bcx = (REAL) (pb[0] - pc[0]);
- acy = (REAL) (pa[1] - pc[1]);
- bcy = (REAL) (pb[1] - pc[1]);
-
- Two_Product(acx, bcy, detleft, detlefttail);
- Two_Product(acy, bcx, detright, detrighttail);
-
- Two_Two_Diff(detleft, detlefttail, detright, detrighttail,
- B3, B[2], B[1], B[0]);
- B[3] = B3;
-
- det = estimate(4, B);
- errbound = ccwerrboundB * detsum;
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- Two_Diff_Tail(pa[0], pc[0], acx, acxtail);
- Two_Diff_Tail(pb[0], pc[0], bcx, bcxtail);
- Two_Diff_Tail(pa[1], pc[1], acy, acytail);
- Two_Diff_Tail(pb[1], pc[1], bcy, bcytail);
-
- if ((acxtail == 0.0) && (acytail == 0.0)
- && (bcxtail == 0.0) && (bcytail == 0.0)) {
- return det;
- }
-
- errbound = ccwerrboundC * detsum + resulterrbound * Absolute(det);
- det += (acx * bcytail + bcy * acxtail)
- - (acy * bcxtail + bcx * acytail);
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- Two_Product(acxtail, bcy, s1, s0);
- Two_Product(acytail, bcx, t1, t0);
- Two_Two_Diff(s1, s0, t1, t0, u3, u[2], u[1], u[0]);
- u[3] = u3;
- C1length = fast_expansion_sum_zeroelim(4, B, 4, u, C1);
-
- Two_Product(acx, bcytail, s1, s0);
- Two_Product(acy, bcxtail, t1, t0);
- Two_Two_Diff(s1, s0, t1, t0, u3, u[2], u[1], u[0]);
- u[3] = u3;
- C2length = fast_expansion_sum_zeroelim(C1length, C1, 4, u, C2);
-
- Two_Product(acxtail, bcytail, s1, s0);
- Two_Product(acytail, bcxtail, t1, t0);
- Two_Two_Diff(s1, s0, t1, t0, u3, u[2], u[1], u[0]);
- u[3] = u3;
- Dlength = fast_expansion_sum_zeroelim(C2length, C2, 4, u, D);
-
- return(D[Dlength - 1]);
-}
-
-REAL orient2d(REAL *pa, REAL *pb, REAL *pc)
-{
- REAL detleft, detright, det;
- REAL detsum, errbound;
-
- detleft = (pa[0] - pc[0]) * (pb[1] - pc[1]);
- detright = (pa[1] - pc[1]) * (pb[0] - pc[0]);
- det = detleft - detright;
-
- if (detleft > 0.0) {
- if (detright <= 0.0) {
- return det;
- } else {
- detsum = detleft + detright;
- }
- } else if (detleft < 0.0) {
- if (detright >= 0.0) {
- return det;
- } else {
- detsum = -detleft - detright;
- }
- } else {
- return det;
- }
-
- errbound = ccwerrboundA * detsum;
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- return orient2dadapt(pa, pb, pc, detsum);
-}
-
-/*****************************************************************************/
-/* */
-/* orient3dfast() Approximate 3D orientation test. Nonrobust. */
-/* orient3dexact() Exact 3D orientation test. Robust. */
-/* orient3dslow() Another exact 3D orientation test. Robust. */
-/* orient3d() Adaptive exact 3D orientation test. Robust. */
-/* */
-/* Return a positive value if the point pd lies below the */
-/* plane passing through pa, pb, and pc; "below" is defined so */
-/* that pa, pb, and pc appear in counterclockwise order when */
-/* viewed from above the plane. Returns a negative value if */
-/* pd lies above the plane. Returns zero if the points are */
-/* coplanar. The result is also a rough approximation of six */
-/* times the signed volume of the tetrahedron defined by the */
-/* four points. */
-/* */
-/* Only the first and last routine should be used; the middle two are for */
-/* timings. */
-/* */
-/* The last three use exact arithmetic to ensure a correct answer. The */
-/* result returned is the determinant of a matrix. In orient3d() only, */
-/* this determinant is computed adaptively, in the sense that exact */
-/* arithmetic is used only to the degree it is needed to ensure that the */
-/* returned value has the correct sign. Hence, orient3d() is usually quite */
-/* fast, but will run more slowly when the input points are coplanar or */
-/* nearly so. */
-/* */
-/*****************************************************************************/
-
-REAL orient3dfast(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- REAL adx, bdx, cdx;
- REAL ady, bdy, cdy;
- REAL adz, bdz, cdz;
-
- adx = pa[0] - pd[0];
- bdx = pb[0] - pd[0];
- cdx = pc[0] - pd[0];
- ady = pa[1] - pd[1];
- bdy = pb[1] - pd[1];
- cdy = pc[1] - pd[1];
- adz = pa[2] - pd[2];
- bdz = pb[2] - pd[2];
- cdz = pc[2] - pd[2];
-
- return adx * (bdy * cdz - bdz * cdy)
- + bdx * (cdy * adz - cdz * ady)
- + cdx * (ady * bdz - adz * bdy);
-}
-
-REAL orient3dexact(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- INEXACT REAL axby1, bxcy1, cxdy1, dxay1, axcy1, bxdy1;
- INEXACT REAL bxay1, cxby1, dxcy1, axdy1, cxay1, dxby1;
- REAL axby0, bxcy0, cxdy0, dxay0, axcy0, bxdy0;
- REAL bxay0, cxby0, dxcy0, axdy0, cxay0, dxby0;
- REAL ab[4], bc[4], cd[4], da[4], ac[4], bd[4];
- REAL temp8[8];
- int templen;
- REAL abc[12], bcd[12], cda[12], dab[12];
- int abclen, bcdlen, cdalen, dablen;
- REAL adet[24], bdet[24], cdet[24], ddet[24];
- int alen, blen, clen, dlen;
- REAL abdet[48], cddet[48];
- int ablen, cdlen;
- REAL deter[96];
- int deterlen;
- int i;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- Two_Product(pa[0], pb[1], axby1, axby0);
- Two_Product(pb[0], pa[1], bxay1, bxay0);
- Two_Two_Diff(axby1, axby0, bxay1, bxay0, ab[3], ab[2], ab[1], ab[0]);
-
- Two_Product(pb[0], pc[1], bxcy1, bxcy0);
- Two_Product(pc[0], pb[1], cxby1, cxby0);
- Two_Two_Diff(bxcy1, bxcy0, cxby1, cxby0, bc[3], bc[2], bc[1], bc[0]);
-
- Two_Product(pc[0], pd[1], cxdy1, cxdy0);
- Two_Product(pd[0], pc[1], dxcy1, dxcy0);
- Two_Two_Diff(cxdy1, cxdy0, dxcy1, dxcy0, cd[3], cd[2], cd[1], cd[0]);
-
- Two_Product(pd[0], pa[1], dxay1, dxay0);
- Two_Product(pa[0], pd[1], axdy1, axdy0);
- Two_Two_Diff(dxay1, dxay0, axdy1, axdy0, da[3], da[2], da[1], da[0]);
-
- Two_Product(pa[0], pc[1], axcy1, axcy0);
- Two_Product(pc[0], pa[1], cxay1, cxay0);
- Two_Two_Diff(axcy1, axcy0, cxay1, cxay0, ac[3], ac[2], ac[1], ac[0]);
-
- Two_Product(pb[0], pd[1], bxdy1, bxdy0);
- Two_Product(pd[0], pb[1], dxby1, dxby0);
- Two_Two_Diff(bxdy1, bxdy0, dxby1, dxby0, bd[3], bd[2], bd[1], bd[0]);
-
- templen = fast_expansion_sum_zeroelim(4, cd, 4, da, temp8);
- cdalen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, cda);
- templen = fast_expansion_sum_zeroelim(4, da, 4, ab, temp8);
- dablen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, dab);
- for (i = 0; i < 4; i++) {
- bd[i] = -bd[i];
- ac[i] = -ac[i];
- }
- templen = fast_expansion_sum_zeroelim(4, ab, 4, bc, temp8);
- abclen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, abc);
- templen = fast_expansion_sum_zeroelim(4, bc, 4, cd, temp8);
- bcdlen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, bcd);
-
- alen = scale_expansion_zeroelim(bcdlen, bcd, pa[2], adet);
- blen = scale_expansion_zeroelim(cdalen, cda, -pb[2], bdet);
- clen = scale_expansion_zeroelim(dablen, dab, pc[2], cdet);
- dlen = scale_expansion_zeroelim(abclen, abc, -pd[2], ddet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
- deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL orient3dslow(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- INEXACT REAL adx, ady, adz, bdx, bdy, bdz, cdx, cdy, cdz;
- REAL adxtail, adytail, adztail;
- REAL bdxtail, bdytail, bdztail;
- REAL cdxtail, cdytail, cdztail;
- REAL negate, negatetail;
- INEXACT REAL axby7, bxcy7, axcy7, bxay7, cxby7, cxay7;
- REAL axby[8], bxcy[8], axcy[8], bxay[8], cxby[8], cxay[8];
- REAL temp16[16], temp32[32], temp32t[32];
- int temp16len, temp32len, temp32tlen;
- REAL adet[64], bdet[64], cdet[64];
- int alen, blen, clen;
- REAL abdet[128];
- int ablen;
- REAL deter[192];
- int deterlen;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j, _k, _l, _m, _n;
- REAL _0, _1, _2;
-
- Two_Diff(pa[0], pd[0], adx, adxtail);
- Two_Diff(pa[1], pd[1], ady, adytail);
- Two_Diff(pa[2], pd[2], adz, adztail);
- Two_Diff(pb[0], pd[0], bdx, bdxtail);
- Two_Diff(pb[1], pd[1], bdy, bdytail);
- Two_Diff(pb[2], pd[2], bdz, bdztail);
- Two_Diff(pc[0], pd[0], cdx, cdxtail);
- Two_Diff(pc[1], pd[1], cdy, cdytail);
- Two_Diff(pc[2], pd[2], cdz, cdztail);
-
- Two_Two_Product(adx, adxtail, bdy, bdytail,
- axby7, axby[6], axby[5], axby[4],
- axby[3], axby[2], axby[1], axby[0]);
- axby[7] = axby7;
- negate = -ady;
- negatetail = -adytail;
- Two_Two_Product(bdx, bdxtail, negate, negatetail,
- bxay7, bxay[6], bxay[5], bxay[4],
- bxay[3], bxay[2], bxay[1], bxay[0]);
- bxay[7] = bxay7;
- Two_Two_Product(bdx, bdxtail, cdy, cdytail,
- bxcy7, bxcy[6], bxcy[5], bxcy[4],
- bxcy[3], bxcy[2], bxcy[1], bxcy[0]);
- bxcy[7] = bxcy7;
- negate = -bdy;
- negatetail = -bdytail;
- Two_Two_Product(cdx, cdxtail, negate, negatetail,
- cxby7, cxby[6], cxby[5], cxby[4],
- cxby[3], cxby[2], cxby[1], cxby[0]);
- cxby[7] = cxby7;
- Two_Two_Product(cdx, cdxtail, ady, adytail,
- cxay7, cxay[6], cxay[5], cxay[4],
- cxay[3], cxay[2], cxay[1], cxay[0]);
- cxay[7] = cxay7;
- negate = -cdy;
- negatetail = -cdytail;
- Two_Two_Product(adx, adxtail, negate, negatetail,
- axcy7, axcy[6], axcy[5], axcy[4],
- axcy[3], axcy[2], axcy[1], axcy[0]);
- axcy[7] = axcy7;
-
- temp16len = fast_expansion_sum_zeroelim(8, bxcy, 8, cxby, temp16);
- temp32len = scale_expansion_zeroelim(temp16len, temp16, adz, temp32);
- temp32tlen = scale_expansion_zeroelim(temp16len, temp16, adztail, temp32t);
- alen = fast_expansion_sum_zeroelim(temp32len, temp32, temp32tlen, temp32t,
- adet);
-
- temp16len = fast_expansion_sum_zeroelim(8, cxay, 8, axcy, temp16);
- temp32len = scale_expansion_zeroelim(temp16len, temp16, bdz, temp32);
- temp32tlen = scale_expansion_zeroelim(temp16len, temp16, bdztail, temp32t);
- blen = fast_expansion_sum_zeroelim(temp32len, temp32, temp32tlen, temp32t,
- bdet);
-
- temp16len = fast_expansion_sum_zeroelim(8, axby, 8, bxay, temp16);
- temp32len = scale_expansion_zeroelim(temp16len, temp16, cdz, temp32);
- temp32tlen = scale_expansion_zeroelim(temp16len, temp16, cdztail, temp32t);
- clen = fast_expansion_sum_zeroelim(temp32len, temp32, temp32tlen, temp32t,
- cdet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- deterlen = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL orient3dadapt(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL permanent)
-{
- INEXACT REAL adx, bdx, cdx, ady, bdy, cdy, adz, bdz, cdz;
- REAL det, errbound;
-
- INEXACT REAL bdxcdy1, cdxbdy1, cdxady1, adxcdy1, adxbdy1, bdxady1;
- REAL bdxcdy0, cdxbdy0, cdxady0, adxcdy0, adxbdy0, bdxady0;
- REAL bc[4], ca[4], ab[4];
- INEXACT REAL bc3, ca3, ab3;
- REAL adet[8], bdet[8], cdet[8];
- int alen, blen, clen;
- REAL abdet[16];
- int ablen;
- REAL *finnow, *finother, *finswap;
- REAL fin1[192], fin2[192];
- int finlength;
-
- REAL adxtail, bdxtail, cdxtail;
- REAL adytail, bdytail, cdytail;
- REAL adztail, bdztail, cdztail;
- INEXACT REAL at_blarge, at_clarge;
- INEXACT REAL bt_clarge, bt_alarge;
- INEXACT REAL ct_alarge, ct_blarge;
- REAL at_b[4], at_c[4], bt_c[4], bt_a[4], ct_a[4], ct_b[4];
- int at_blen, at_clen, bt_clen, bt_alen, ct_alen, ct_blen;
- INEXACT REAL bdxt_cdy1, cdxt_bdy1, cdxt_ady1;
- INEXACT REAL adxt_cdy1, adxt_bdy1, bdxt_ady1;
- REAL bdxt_cdy0, cdxt_bdy0, cdxt_ady0;
- REAL adxt_cdy0, adxt_bdy0, bdxt_ady0;
- INEXACT REAL bdyt_cdx1, cdyt_bdx1, cdyt_adx1;
- INEXACT REAL adyt_cdx1, adyt_bdx1, bdyt_adx1;
- REAL bdyt_cdx0, cdyt_bdx0, cdyt_adx0;
- REAL adyt_cdx0, adyt_bdx0, bdyt_adx0;
- REAL bct[8], cat[8], abt[8];
- int bctlen, catlen, abtlen;
- INEXACT REAL bdxt_cdyt1, cdxt_bdyt1, cdxt_adyt1;
- INEXACT REAL adxt_cdyt1, adxt_bdyt1, bdxt_adyt1;
- REAL bdxt_cdyt0, cdxt_bdyt0, cdxt_adyt0;
- REAL adxt_cdyt0, adxt_bdyt0, bdxt_adyt0;
- REAL u[4], v[12], w[16];
- INEXACT REAL u3;
- int vlength, wlength;
- REAL negate;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j, _k;
- REAL _0;
-
- adx = (REAL) (pa[0] - pd[0]);
- bdx = (REAL) (pb[0] - pd[0]);
- cdx = (REAL) (pc[0] - pd[0]);
- ady = (REAL) (pa[1] - pd[1]);
- bdy = (REAL) (pb[1] - pd[1]);
- cdy = (REAL) (pc[1] - pd[1]);
- adz = (REAL) (pa[2] - pd[2]);
- bdz = (REAL) (pb[2] - pd[2]);
- cdz = (REAL) (pc[2] - pd[2]);
-
- Two_Product(bdx, cdy, bdxcdy1, bdxcdy0);
- Two_Product(cdx, bdy, cdxbdy1, cdxbdy0);
- Two_Two_Diff(bdxcdy1, bdxcdy0, cdxbdy1, cdxbdy0, bc3, bc[2], bc[1], bc[0]);
- bc[3] = bc3;
- alen = scale_expansion_zeroelim(4, bc, adz, adet);
-
- Two_Product(cdx, ady, cdxady1, cdxady0);
- Two_Product(adx, cdy, adxcdy1, adxcdy0);
- Two_Two_Diff(cdxady1, cdxady0, adxcdy1, adxcdy0, ca3, ca[2], ca[1], ca[0]);
- ca[3] = ca3;
- blen = scale_expansion_zeroelim(4, ca, bdz, bdet);
-
- Two_Product(adx, bdy, adxbdy1, adxbdy0);
- Two_Product(bdx, ady, bdxady1, bdxady0);
- Two_Two_Diff(adxbdy1, adxbdy0, bdxady1, bdxady0, ab3, ab[2], ab[1], ab[0]);
- ab[3] = ab3;
- clen = scale_expansion_zeroelim(4, ab, cdz, cdet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- finlength = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, fin1);
-
- det = estimate(finlength, fin1);
- errbound = o3derrboundB * permanent;
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- Two_Diff_Tail(pa[0], pd[0], adx, adxtail);
- Two_Diff_Tail(pb[0], pd[0], bdx, bdxtail);
- Two_Diff_Tail(pc[0], pd[0], cdx, cdxtail);
- Two_Diff_Tail(pa[1], pd[1], ady, adytail);
- Two_Diff_Tail(pb[1], pd[1], bdy, bdytail);
- Two_Diff_Tail(pc[1], pd[1], cdy, cdytail);
- Two_Diff_Tail(pa[2], pd[2], adz, adztail);
- Two_Diff_Tail(pb[2], pd[2], bdz, bdztail);
- Two_Diff_Tail(pc[2], pd[2], cdz, cdztail);
-
- if ((adxtail == 0.0) && (bdxtail == 0.0) && (cdxtail == 0.0)
- && (adytail == 0.0) && (bdytail == 0.0) && (cdytail == 0.0)
- && (adztail == 0.0) && (bdztail == 0.0) && (cdztail == 0.0)) {
- return det;
- }
-
- errbound = o3derrboundC * permanent + resulterrbound * Absolute(det);
- det += (adz * ((bdx * cdytail + cdy * bdxtail)
- - (bdy * cdxtail + cdx * bdytail))
- + adztail * (bdx * cdy - bdy * cdx))
- + (bdz * ((cdx * adytail + ady * cdxtail)
- - (cdy * adxtail + adx * cdytail))
- + bdztail * (cdx * ady - cdy * adx))
- + (cdz * ((adx * bdytail + bdy * adxtail)
- - (ady * bdxtail + bdx * adytail))
- + cdztail * (adx * bdy - ady * bdx));
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- finnow = fin1;
- finother = fin2;
-
- if (adxtail == 0.0) {
- if (adytail == 0.0) {
- at_b[0] = 0.0;
- at_blen = 1;
- at_c[0] = 0.0;
- at_clen = 1;
- } else {
- negate = -adytail;
- Two_Product(negate, bdx, at_blarge, at_b[0]);
- at_b[1] = at_blarge;
- at_blen = 2;
- Two_Product(adytail, cdx, at_clarge, at_c[0]);
- at_c[1] = at_clarge;
- at_clen = 2;
- }
- } else {
- if (adytail == 0.0) {
- Two_Product(adxtail, bdy, at_blarge, at_b[0]);
- at_b[1] = at_blarge;
- at_blen = 2;
- negate = -adxtail;
- Two_Product(negate, cdy, at_clarge, at_c[0]);
- at_c[1] = at_clarge;
- at_clen = 2;
- } else {
- Two_Product(adxtail, bdy, adxt_bdy1, adxt_bdy0);
- Two_Product(adytail, bdx, adyt_bdx1, adyt_bdx0);
- Two_Two_Diff(adxt_bdy1, adxt_bdy0, adyt_bdx1, adyt_bdx0,
- at_blarge, at_b[2], at_b[1], at_b[0]);
- at_b[3] = at_blarge;
- at_blen = 4;
- Two_Product(adytail, cdx, adyt_cdx1, adyt_cdx0);
- Two_Product(adxtail, cdy, adxt_cdy1, adxt_cdy0);
- Two_Two_Diff(adyt_cdx1, adyt_cdx0, adxt_cdy1, adxt_cdy0,
- at_clarge, at_c[2], at_c[1], at_c[0]);
- at_c[3] = at_clarge;
- at_clen = 4;
- }
- }
- if (bdxtail == 0.0) {
- if (bdytail == 0.0) {
- bt_c[0] = 0.0;
- bt_clen = 1;
- bt_a[0] = 0.0;
- bt_alen = 1;
- } else {
- negate = -bdytail;
- Two_Product(negate, cdx, bt_clarge, bt_c[0]);
- bt_c[1] = bt_clarge;
- bt_clen = 2;
- Two_Product(bdytail, adx, bt_alarge, bt_a[0]);
- bt_a[1] = bt_alarge;
- bt_alen = 2;
- }
- } else {
- if (bdytail == 0.0) {
- Two_Product(bdxtail, cdy, bt_clarge, bt_c[0]);
- bt_c[1] = bt_clarge;
- bt_clen = 2;
- negate = -bdxtail;
- Two_Product(negate, ady, bt_alarge, bt_a[0]);
- bt_a[1] = bt_alarge;
- bt_alen = 2;
- } else {
- Two_Product(bdxtail, cdy, bdxt_cdy1, bdxt_cdy0);
- Two_Product(bdytail, cdx, bdyt_cdx1, bdyt_cdx0);
- Two_Two_Diff(bdxt_cdy1, bdxt_cdy0, bdyt_cdx1, bdyt_cdx0,
- bt_clarge, bt_c[2], bt_c[1], bt_c[0]);
- bt_c[3] = bt_clarge;
- bt_clen = 4;
- Two_Product(bdytail, adx, bdyt_adx1, bdyt_adx0);
- Two_Product(bdxtail, ady, bdxt_ady1, bdxt_ady0);
- Two_Two_Diff(bdyt_adx1, bdyt_adx0, bdxt_ady1, bdxt_ady0,
- bt_alarge, bt_a[2], bt_a[1], bt_a[0]);
- bt_a[3] = bt_alarge;
- bt_alen = 4;
- }
- }
- if (cdxtail == 0.0) {
- if (cdytail == 0.0) {
- ct_a[0] = 0.0;
- ct_alen = 1;
- ct_b[0] = 0.0;
- ct_blen = 1;
- } else {
- negate = -cdytail;
- Two_Product(negate, adx, ct_alarge, ct_a[0]);
- ct_a[1] = ct_alarge;
- ct_alen = 2;
- Two_Product(cdytail, bdx, ct_blarge, ct_b[0]);
- ct_b[1] = ct_blarge;
- ct_blen = 2;
- }
- } else {
- if (cdytail == 0.0) {
- Two_Product(cdxtail, ady, ct_alarge, ct_a[0]);
- ct_a[1] = ct_alarge;
- ct_alen = 2;
- negate = -cdxtail;
- Two_Product(negate, bdy, ct_blarge, ct_b[0]);
- ct_b[1] = ct_blarge;
- ct_blen = 2;
- } else {
- Two_Product(cdxtail, ady, cdxt_ady1, cdxt_ady0);
- Two_Product(cdytail, adx, cdyt_adx1, cdyt_adx0);
- Two_Two_Diff(cdxt_ady1, cdxt_ady0, cdyt_adx1, cdyt_adx0,
- ct_alarge, ct_a[2], ct_a[1], ct_a[0]);
- ct_a[3] = ct_alarge;
- ct_alen = 4;
- Two_Product(cdytail, bdx, cdyt_bdx1, cdyt_bdx0);
- Two_Product(cdxtail, bdy, cdxt_bdy1, cdxt_bdy0);
- Two_Two_Diff(cdyt_bdx1, cdyt_bdx0, cdxt_bdy1, cdxt_bdy0,
- ct_blarge, ct_b[2], ct_b[1], ct_b[0]);
- ct_b[3] = ct_blarge;
- ct_blen = 4;
- }
- }
-
- bctlen = fast_expansion_sum_zeroelim(bt_clen, bt_c, ct_blen, ct_b, bct);
- wlength = scale_expansion_zeroelim(bctlen, bct, adz, w);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
-
- catlen = fast_expansion_sum_zeroelim(ct_alen, ct_a, at_clen, at_c, cat);
- wlength = scale_expansion_zeroelim(catlen, cat, bdz, w);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
-
- abtlen = fast_expansion_sum_zeroelim(at_blen, at_b, bt_alen, bt_a, abt);
- wlength = scale_expansion_zeroelim(abtlen, abt, cdz, w);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
-
- if (adztail != 0.0) {
- vlength = scale_expansion_zeroelim(4, bc, adztail, v);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, vlength, v,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (bdztail != 0.0) {
- vlength = scale_expansion_zeroelim(4, ca, bdztail, v);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, vlength, v,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (cdztail != 0.0) {
- vlength = scale_expansion_zeroelim(4, ab, cdztail, v);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, vlength, v,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
-
- if (adxtail != 0.0) {
- if (bdytail != 0.0) {
- Two_Product(adxtail, bdytail, adxt_bdyt1, adxt_bdyt0);
- Two_One_Product(adxt_bdyt1, adxt_bdyt0, cdz, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (cdztail != 0.0) {
- Two_One_Product(adxt_bdyt1, adxt_bdyt0, cdztail, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- if (cdytail != 0.0) {
- negate = -adxtail;
- Two_Product(negate, cdytail, adxt_cdyt1, adxt_cdyt0);
- Two_One_Product(adxt_cdyt1, adxt_cdyt0, bdz, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (bdztail != 0.0) {
- Two_One_Product(adxt_cdyt1, adxt_cdyt0, bdztail, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- }
- if (bdxtail != 0.0) {
- if (cdytail != 0.0) {
- Two_Product(bdxtail, cdytail, bdxt_cdyt1, bdxt_cdyt0);
- Two_One_Product(bdxt_cdyt1, bdxt_cdyt0, adz, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (adztail != 0.0) {
- Two_One_Product(bdxt_cdyt1, bdxt_cdyt0, adztail, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- if (adytail != 0.0) {
- negate = -bdxtail;
- Two_Product(negate, adytail, bdxt_adyt1, bdxt_adyt0);
- Two_One_Product(bdxt_adyt1, bdxt_adyt0, cdz, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (cdztail != 0.0) {
- Two_One_Product(bdxt_adyt1, bdxt_adyt0, cdztail, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- }
- if (cdxtail != 0.0) {
- if (adytail != 0.0) {
- Two_Product(cdxtail, adytail, cdxt_adyt1, cdxt_adyt0);
- Two_One_Product(cdxt_adyt1, cdxt_adyt0, bdz, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (bdztail != 0.0) {
- Two_One_Product(cdxt_adyt1, cdxt_adyt0, bdztail, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- if (bdytail != 0.0) {
- negate = -cdxtail;
- Two_Product(negate, bdytail, cdxt_bdyt1, cdxt_bdyt0);
- Two_One_Product(cdxt_bdyt1, cdxt_bdyt0, adz, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (adztail != 0.0) {
- Two_One_Product(cdxt_bdyt1, cdxt_bdyt0, adztail, u3, u[2], u[1], u[0]);
- u[3] = u3;
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- }
-
- if (adztail != 0.0) {
- wlength = scale_expansion_zeroelim(bctlen, bct, adztail, w);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (bdztail != 0.0) {
- wlength = scale_expansion_zeroelim(catlen, cat, bdztail, w);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (cdztail != 0.0) {
- wlength = scale_expansion_zeroelim(abtlen, abt, cdztail, w);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
- finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
-
- return finnow[finlength - 1];
-}
-
-REAL orient3d(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- REAL adx, bdx, cdx, ady, bdy, cdy, adz, bdz, cdz;
- REAL bdxcdy, cdxbdy, cdxady, adxcdy, adxbdy, bdxady;
- REAL det;
- REAL permanent, errbound;
-
- adx = pa[0] - pd[0];
- bdx = pb[0] - pd[0];
- cdx = pc[0] - pd[0];
- ady = pa[1] - pd[1];
- bdy = pb[1] - pd[1];
- cdy = pc[1] - pd[1];
- adz = pa[2] - pd[2];
- bdz = pb[2] - pd[2];
- cdz = pc[2] - pd[2];
-
- bdxcdy = bdx * cdy;
- cdxbdy = cdx * bdy;
-
- cdxady = cdx * ady;
- adxcdy = adx * cdy;
-
- adxbdy = adx * bdy;
- bdxady = bdx * ady;
-
- det = adz * (bdxcdy - cdxbdy)
- + bdz * (cdxady - adxcdy)
- + cdz * (adxbdy - bdxady);
-
- permanent = (Absolute(bdxcdy) + Absolute(cdxbdy)) * Absolute(adz)
- + (Absolute(cdxady) + Absolute(adxcdy)) * Absolute(bdz)
- + (Absolute(adxbdy) + Absolute(bdxady)) * Absolute(cdz);
- errbound = o3derrboundA * permanent;
- if ((det > errbound) || (-det > errbound)) {
- return det;
- }
-
- return orient3dadapt(pa, pb, pc, pd, permanent);
-}
-
-/*****************************************************************************/
-/* */
-/* incirclefast() Approximate 2D incircle test. Nonrobust. */
-/* incircleexact() Exact 2D incircle test. Robust. */
-/* incircleslow() Another exact 2D incircle test. Robust. */
-/* incircle() Adaptive exact 2D incircle test. Robust. */
-/* */
-/* Return a positive value if the point pd lies inside the */
-/* circle passing through pa, pb, and pc; a negative value if */
-/* it lies outside; and zero if the four points are cocircular.*/
-/* The points pa, pb, and pc must be in counterclockwise */
-/* order, or the sign of the result will be reversed. */
-/* */
-/* Only the first and last routine should be used; the middle two are for */
-/* timings. */
-/* */
-/* The last three use exact arithmetic to ensure a correct answer. The */
-/* result returned is the determinant of a matrix. In incircle() only, */
-/* this determinant is computed adaptively, in the sense that exact */
-/* arithmetic is used only to the degree it is needed to ensure that the */
-/* returned value has the correct sign. Hence, incircle() is usually quite */
-/* fast, but will run more slowly when the input points are cocircular or */
-/* nearly so. */
-/* */
-/*****************************************************************************/
-
-REAL incirclefast(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- REAL adx, ady, bdx, bdy, cdx, cdy;
- REAL abdet, bcdet, cadet;
- REAL alift, blift, clift;
-
- adx = pa[0] - pd[0];
- ady = pa[1] - pd[1];
- bdx = pb[0] - pd[0];
- bdy = pb[1] - pd[1];
- cdx = pc[0] - pd[0];
- cdy = pc[1] - pd[1];
-
- abdet = adx * bdy - bdx * ady;
- bcdet = bdx * cdy - cdx * bdy;
- cadet = cdx * ady - adx * cdy;
- alift = adx * adx + ady * ady;
- blift = bdx * bdx + bdy * bdy;
- clift = cdx * cdx + cdy * cdy;
-
- return alift * bcdet + blift * cadet + clift * abdet;
-}
-
-REAL incircleexact(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- INEXACT REAL axby1, bxcy1, cxdy1, dxay1, axcy1, bxdy1;
- INEXACT REAL bxay1, cxby1, dxcy1, axdy1, cxay1, dxby1;
- REAL axby0, bxcy0, cxdy0, dxay0, axcy0, bxdy0;
- REAL bxay0, cxby0, dxcy0, axdy0, cxay0, dxby0;
- REAL ab[4], bc[4], cd[4], da[4], ac[4], bd[4];
- REAL temp8[8];
- int templen;
- REAL abc[12], bcd[12], cda[12], dab[12];
- int abclen, bcdlen, cdalen, dablen;
- REAL det24x[24], det24y[24], det48x[48], det48y[48];
- int xlen, ylen;
- REAL adet[96], bdet[96], cdet[96], ddet[96];
- int alen, blen, clen, dlen;
- REAL abdet[192], cddet[192];
- int ablen, cdlen;
- REAL deter[384];
- int deterlen;
- int i;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- Two_Product(pa[0], pb[1], axby1, axby0);
- Two_Product(pb[0], pa[1], bxay1, bxay0);
- Two_Two_Diff(axby1, axby0, bxay1, bxay0, ab[3], ab[2], ab[1], ab[0]);
-
- Two_Product(pb[0], pc[1], bxcy1, bxcy0);
- Two_Product(pc[0], pb[1], cxby1, cxby0);
- Two_Two_Diff(bxcy1, bxcy0, cxby1, cxby0, bc[3], bc[2], bc[1], bc[0]);
-
- Two_Product(pc[0], pd[1], cxdy1, cxdy0);
- Two_Product(pd[0], pc[1], dxcy1, dxcy0);
- Two_Two_Diff(cxdy1, cxdy0, dxcy1, dxcy0, cd[3], cd[2], cd[1], cd[0]);
-
- Two_Product(pd[0], pa[1], dxay1, dxay0);
- Two_Product(pa[0], pd[1], axdy1, axdy0);
- Two_Two_Diff(dxay1, dxay0, axdy1, axdy0, da[3], da[2], da[1], da[0]);
-
- Two_Product(pa[0], pc[1], axcy1, axcy0);
- Two_Product(pc[0], pa[1], cxay1, cxay0);
- Two_Two_Diff(axcy1, axcy0, cxay1, cxay0, ac[3], ac[2], ac[1], ac[0]);
-
- Two_Product(pb[0], pd[1], bxdy1, bxdy0);
- Two_Product(pd[0], pb[1], dxby1, dxby0);
- Two_Two_Diff(bxdy1, bxdy0, dxby1, dxby0, bd[3], bd[2], bd[1], bd[0]);
-
- templen = fast_expansion_sum_zeroelim(4, cd, 4, da, temp8);
- cdalen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, cda);
- templen = fast_expansion_sum_zeroelim(4, da, 4, ab, temp8);
- dablen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, dab);
- for (i = 0; i < 4; i++) {
- bd[i] = -bd[i];
- ac[i] = -ac[i];
- }
- templen = fast_expansion_sum_zeroelim(4, ab, 4, bc, temp8);
- abclen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, abc);
- templen = fast_expansion_sum_zeroelim(4, bc, 4, cd, temp8);
- bcdlen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, bcd);
-
- xlen = scale_expansion_zeroelim(bcdlen, bcd, pa[0], det24x);
- xlen = scale_expansion_zeroelim(xlen, det24x, pa[0], det48x);
- ylen = scale_expansion_zeroelim(bcdlen, bcd, pa[1], det24y);
- ylen = scale_expansion_zeroelim(ylen, det24y, pa[1], det48y);
- alen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, adet);
-
- xlen = scale_expansion_zeroelim(cdalen, cda, pb[0], det24x);
- xlen = scale_expansion_zeroelim(xlen, det24x, -pb[0], det48x);
- ylen = scale_expansion_zeroelim(cdalen, cda, pb[1], det24y);
- ylen = scale_expansion_zeroelim(ylen, det24y, -pb[1], det48y);
- blen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, bdet);
-
- xlen = scale_expansion_zeroelim(dablen, dab, pc[0], det24x);
- xlen = scale_expansion_zeroelim(xlen, det24x, pc[0], det48x);
- ylen = scale_expansion_zeroelim(dablen, dab, pc[1], det24y);
- ylen = scale_expansion_zeroelim(ylen, det24y, pc[1], det48y);
- clen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, cdet);
-
- xlen = scale_expansion_zeroelim(abclen, abc, pd[0], det24x);
- xlen = scale_expansion_zeroelim(xlen, det24x, -pd[0], det48x);
- ylen = scale_expansion_zeroelim(abclen, abc, pd[1], det24y);
- ylen = scale_expansion_zeroelim(ylen, det24y, -pd[1], det48y);
- dlen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, ddet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
- deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL incircleslow(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- INEXACT REAL adx, bdx, cdx, ady, bdy, cdy;
- REAL adxtail, bdxtail, cdxtail;
- REAL adytail, bdytail, cdytail;
- REAL negate, negatetail;
- INEXACT REAL axby7, bxcy7, axcy7, bxay7, cxby7, cxay7;
- REAL axby[8], bxcy[8], axcy[8], bxay[8], cxby[8], cxay[8];
- REAL temp16[16];
- int temp16len;
- REAL detx[32], detxx[64], detxt[32], detxxt[64], detxtxt[64];
- int xlen, xxlen, xtlen, xxtlen, xtxtlen;
- REAL x1[128], x2[192];
- int x1len, x2len;
- REAL dety[32], detyy[64], detyt[32], detyyt[64], detytyt[64];
- int ylen, yylen, ytlen, yytlen, ytytlen;
- REAL y1[128], y2[192];
- int y1len, y2len;
- REAL adet[384], bdet[384], cdet[384], abdet[768], deter[1152];
- int alen, blen, clen, ablen, deterlen;
- int i;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j, _k, _l, _m, _n;
- REAL _0, _1, _2;
-
- Two_Diff(pa[0], pd[0], adx, adxtail);
- Two_Diff(pa[1], pd[1], ady, adytail);
- Two_Diff(pb[0], pd[0], bdx, bdxtail);
- Two_Diff(pb[1], pd[1], bdy, bdytail);
- Two_Diff(pc[0], pd[0], cdx, cdxtail);
- Two_Diff(pc[1], pd[1], cdy, cdytail);
-
- Two_Two_Product(adx, adxtail, bdy, bdytail,
- axby7, axby[6], axby[5], axby[4],
- axby[3], axby[2], axby[1], axby[0]);
- axby[7] = axby7;
- negate = -ady;
- negatetail = -adytail;
- Two_Two_Product(bdx, bdxtail, negate, negatetail,
- bxay7, bxay[6], bxay[5], bxay[4],
- bxay[3], bxay[2], bxay[1], bxay[0]);
- bxay[7] = bxay7;
- Two_Two_Product(bdx, bdxtail, cdy, cdytail,
- bxcy7, bxcy[6], bxcy[5], bxcy[4],
- bxcy[3], bxcy[2], bxcy[1], bxcy[0]);
- bxcy[7] = bxcy7;
- negate = -bdy;
- negatetail = -bdytail;
- Two_Two_Product(cdx, cdxtail, negate, negatetail,
- cxby7, cxby[6], cxby[5], cxby[4],
- cxby[3], cxby[2], cxby[1], cxby[0]);
- cxby[7] = cxby7;
- Two_Two_Product(cdx, cdxtail, ady, adytail,
- cxay7, cxay[6], cxay[5], cxay[4],
- cxay[3], cxay[2], cxay[1], cxay[0]);
- cxay[7] = cxay7;
- negate = -cdy;
- negatetail = -cdytail;
- Two_Two_Product(adx, adxtail, negate, negatetail,
- axcy7, axcy[6], axcy[5], axcy[4],
- axcy[3], axcy[2], axcy[1], axcy[0]);
- axcy[7] = axcy7;
-
-
- temp16len = fast_expansion_sum_zeroelim(8, bxcy, 8, cxby, temp16);
-
- xlen = scale_expansion_zeroelim(temp16len, temp16, adx, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, adx, detxx);
- xtlen = scale_expansion_zeroelim(temp16len, temp16, adxtail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, adx, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, adxtail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
-
- ylen = scale_expansion_zeroelim(temp16len, temp16, ady, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, ady, detyy);
- ytlen = scale_expansion_zeroelim(temp16len, temp16, adytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, ady, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, adytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
-
- alen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, adet);
-
-
- temp16len = fast_expansion_sum_zeroelim(8, cxay, 8, axcy, temp16);
-
- xlen = scale_expansion_zeroelim(temp16len, temp16, bdx, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, bdx, detxx);
- xtlen = scale_expansion_zeroelim(temp16len, temp16, bdxtail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, bdx, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, bdxtail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
-
- ylen = scale_expansion_zeroelim(temp16len, temp16, bdy, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, bdy, detyy);
- ytlen = scale_expansion_zeroelim(temp16len, temp16, bdytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, bdy, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, bdytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
-
- blen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, bdet);
-
-
- temp16len = fast_expansion_sum_zeroelim(8, axby, 8, bxay, temp16);
-
- xlen = scale_expansion_zeroelim(temp16len, temp16, cdx, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, cdx, detxx);
- xtlen = scale_expansion_zeroelim(temp16len, temp16, cdxtail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, cdx, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, cdxtail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
-
- ylen = scale_expansion_zeroelim(temp16len, temp16, cdy, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, cdy, detyy);
- ytlen = scale_expansion_zeroelim(temp16len, temp16, cdytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, cdy, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, cdytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
-
- clen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, cdet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- deterlen = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL incircleadapt(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL permanent)
-{
- INEXACT REAL adx, bdx, cdx, ady, bdy, cdy;
- REAL det, errbound;
-
- INEXACT REAL bdxcdy1, cdxbdy1, cdxady1, adxcdy1, adxbdy1, bdxady1;
- REAL bdxcdy0, cdxbdy0, cdxady0, adxcdy0, adxbdy0, bdxady0;
- REAL bc[4], ca[4], ab[4];
- INEXACT REAL bc3, ca3, ab3;
- REAL axbc[8], axxbc[16], aybc[8], ayybc[16], adet[32];
- int axbclen, axxbclen, aybclen, ayybclen, alen;
- REAL bxca[8], bxxca[16], byca[8], byyca[16], bdet[32];
- int bxcalen, bxxcalen, bycalen, byycalen, blen;
- REAL cxab[8], cxxab[16], cyab[8], cyyab[16], cdet[32];
- int cxablen, cxxablen, cyablen, cyyablen, clen;
- REAL abdet[64];
- int ablen;
- REAL fin1[1152], fin2[1152];
- REAL *finnow, *finother, *finswap;
- int finlength;
-
- REAL adxtail, bdxtail, cdxtail, adytail, bdytail, cdytail;
- INEXACT REAL adxadx1, adyady1, bdxbdx1, bdybdy1, cdxcdx1, cdycdy1;
- REAL adxadx0, adyady0, bdxbdx0, bdybdy0, cdxcdx0, cdycdy0;
- REAL aa[4], bb[4], cc[4];
- INEXACT REAL aa3, bb3, cc3;
- INEXACT REAL ti1, tj1;
- REAL ti0, tj0;
- REAL u[4], v[4];
- INEXACT REAL u3, v3;
- REAL temp8[8], temp16a[16], temp16b[16], temp16c[16];
- REAL temp32a[32], temp32b[32], temp48[48], temp64[64];
- int temp8len, temp16alen, temp16blen, temp16clen;
- int temp32alen, temp32blen, temp48len, temp64len;
- REAL axtbb[8], axtcc[8], aytbb[8], aytcc[8];
- int axtbblen, axtcclen, aytbblen, aytcclen;
- REAL bxtaa[8], bxtcc[8], bytaa[8], bytcc[8];
- int bxtaalen, bxtcclen, bytaalen, bytcclen;
- REAL cxtaa[8], cxtbb[8], cytaa[8], cytbb[8];
- int cxtaalen, cxtbblen, cytaalen, cytbblen;
- REAL axtbc[8], aytbc[8], bxtca[8], bytca[8], cxtab[8], cytab[8];
- int axtbclen, aytbclen, bxtcalen, bytcalen, cxtablen, cytablen;
- REAL axtbct[16], aytbct[16], bxtcat[16], bytcat[16], cxtabt[16], cytabt[16];
- int axtbctlen, aytbctlen, bxtcatlen, bytcatlen, cxtabtlen, cytabtlen;
- REAL axtbctt[8], aytbctt[8], bxtcatt[8];
- REAL bytcatt[8], cxtabtt[8], cytabtt[8];
- int axtbcttlen, aytbcttlen, bxtcattlen, bytcattlen, cxtabttlen, cytabttlen;
- REAL abt[8], bct[8], cat[8];
- int abtlen, bctlen, catlen;
- REAL abtt[4], bctt[4], catt[4];
- int abttlen, bcttlen, cattlen;
- INEXACT REAL abtt3, bctt3, catt3;
- REAL negate;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- adx = (REAL) (pa[0] - pd[0]);
- bdx = (REAL) (pb[0] - pd[0]);
- cdx = (REAL) (pc[0] - pd[0]);
- ady = (REAL) (pa[1] - pd[1]);
- bdy = (REAL) (pb[1] - pd[1]);
- cdy = (REAL) (pc[1] - pd[1]);
-
- Two_Product(bdx, cdy, bdxcdy1, bdxcdy0);
- Two_Product(cdx, bdy, cdxbdy1, cdxbdy0);
- Two_Two_Diff(bdxcdy1, bdxcdy0, cdxbdy1, cdxbdy0, bc3, bc[2], bc[1], bc[0]);
- bc[3] = bc3;
- axbclen = scale_expansion_zeroelim(4, bc, adx, axbc);
- axxbclen = scale_expansion_zeroelim(axbclen, axbc, adx, axxbc);
- aybclen = scale_expansion_zeroelim(4, bc, ady, aybc);
- ayybclen = scale_expansion_zeroelim(aybclen, aybc, ady, ayybc);
- alen = fast_expansion_sum_zeroelim(axxbclen, axxbc, ayybclen, ayybc, adet);
-
- Two_Product(cdx, ady, cdxady1, cdxady0);
- Two_Product(adx, cdy, adxcdy1, adxcdy0);
- Two_Two_Diff(cdxady1, cdxady0, adxcdy1, adxcdy0, ca3, ca[2], ca[1], ca[0]);
- ca[3] = ca3;
- bxcalen = scale_expansion_zeroelim(4, ca, bdx, bxca);
- bxxcalen = scale_expansion_zeroelim(bxcalen, bxca, bdx, bxxca);
- bycalen = scale_expansion_zeroelim(4, ca, bdy, byca);
- byycalen = scale_expansion_zeroelim(bycalen, byca, bdy, byyca);
- blen = fast_expansion_sum_zeroelim(bxxcalen, bxxca, byycalen, byyca, bdet);
-
- Two_Product(adx, bdy, adxbdy1, adxbdy0);
- Two_Product(bdx, ady, bdxady1, bdxady0);
- Two_Two_Diff(adxbdy1, adxbdy0, bdxady1, bdxady0, ab3, ab[2], ab[1], ab[0]);
- ab[3] = ab3;
- cxablen = scale_expansion_zeroelim(4, ab, cdx, cxab);
- cxxablen = scale_expansion_zeroelim(cxablen, cxab, cdx, cxxab);
- cyablen = scale_expansion_zeroelim(4, ab, cdy, cyab);
- cyyablen = scale_expansion_zeroelim(cyablen, cyab, cdy, cyyab);
- clen = fast_expansion_sum_zeroelim(cxxablen, cxxab, cyyablen, cyyab, cdet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- finlength = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, fin1);
-
- det = estimate(finlength, fin1);
- errbound = iccerrboundB * permanent;
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- Two_Diff_Tail(pa[0], pd[0], adx, adxtail);
- Two_Diff_Tail(pa[1], pd[1], ady, adytail);
- Two_Diff_Tail(pb[0], pd[0], bdx, bdxtail);
- Two_Diff_Tail(pb[1], pd[1], bdy, bdytail);
- Two_Diff_Tail(pc[0], pd[0], cdx, cdxtail);
- Two_Diff_Tail(pc[1], pd[1], cdy, cdytail);
- if ((adxtail == 0.0) && (bdxtail == 0.0) && (cdxtail == 0.0)
- && (adytail == 0.0) && (bdytail == 0.0) && (cdytail == 0.0)) {
- return det;
- }
-
- errbound = iccerrboundC * permanent + resulterrbound * Absolute(det);
- det += ((adx * adx + ady * ady) * ((bdx * cdytail + cdy * bdxtail)
- - (bdy * cdxtail + cdx * bdytail))
- + 2.0 * (adx * adxtail + ady * adytail) * (bdx * cdy - bdy * cdx))
- + ((bdx * bdx + bdy * bdy) * ((cdx * adytail + ady * cdxtail)
- - (cdy * adxtail + adx * cdytail))
- + 2.0 * (bdx * bdxtail + bdy * bdytail) * (cdx * ady - cdy * adx))
- + ((cdx * cdx + cdy * cdy) * ((adx * bdytail + bdy * adxtail)
- - (ady * bdxtail + bdx * adytail))
- + 2.0 * (cdx * cdxtail + cdy * cdytail) * (adx * bdy - ady * bdx));
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- finnow = fin1;
- finother = fin2;
-
- if ((bdxtail != 0.0) || (bdytail != 0.0)
- || (cdxtail != 0.0) || (cdytail != 0.0)) {
- Square(adx, adxadx1, adxadx0);
- Square(ady, adyady1, adyady0);
- Two_Two_Sum(adxadx1, adxadx0, adyady1, adyady0, aa3, aa[2], aa[1], aa[0]);
- aa[3] = aa3;
- }
- if ((cdxtail != 0.0) || (cdytail != 0.0)
- || (adxtail != 0.0) || (adytail != 0.0)) {
- Square(bdx, bdxbdx1, bdxbdx0);
- Square(bdy, bdybdy1, bdybdy0);
- Two_Two_Sum(bdxbdx1, bdxbdx0, bdybdy1, bdybdy0, bb3, bb[2], bb[1], bb[0]);
- bb[3] = bb3;
- }
- if ((adxtail != 0.0) || (adytail != 0.0)
- || (bdxtail != 0.0) || (bdytail != 0.0)) {
- Square(cdx, cdxcdx1, cdxcdx0);
- Square(cdy, cdycdy1, cdycdy0);
- Two_Two_Sum(cdxcdx1, cdxcdx0, cdycdy1, cdycdy0, cc3, cc[2], cc[1], cc[0]);
- cc[3] = cc3;
- }
-
- if (adxtail != 0.0) {
- axtbclen = scale_expansion_zeroelim(4, bc, adxtail, axtbc);
- temp16alen = scale_expansion_zeroelim(axtbclen, axtbc, 2.0 * adx,
- temp16a);
-
- axtcclen = scale_expansion_zeroelim(4, cc, adxtail, axtcc);
- temp16blen = scale_expansion_zeroelim(axtcclen, axtcc, bdy, temp16b);
-
- axtbblen = scale_expansion_zeroelim(4, bb, adxtail, axtbb);
- temp16clen = scale_expansion_zeroelim(axtbblen, axtbb, -cdy, temp16c);
-
- temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (adytail != 0.0) {
- aytbclen = scale_expansion_zeroelim(4, bc, adytail, aytbc);
- temp16alen = scale_expansion_zeroelim(aytbclen, aytbc, 2.0 * ady,
- temp16a);
-
- aytbblen = scale_expansion_zeroelim(4, bb, adytail, aytbb);
- temp16blen = scale_expansion_zeroelim(aytbblen, aytbb, cdx, temp16b);
-
- aytcclen = scale_expansion_zeroelim(4, cc, adytail, aytcc);
- temp16clen = scale_expansion_zeroelim(aytcclen, aytcc, -bdx, temp16c);
-
- temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (bdxtail != 0.0) {
- bxtcalen = scale_expansion_zeroelim(4, ca, bdxtail, bxtca);
- temp16alen = scale_expansion_zeroelim(bxtcalen, bxtca, 2.0 * bdx,
- temp16a);
-
- bxtaalen = scale_expansion_zeroelim(4, aa, bdxtail, bxtaa);
- temp16blen = scale_expansion_zeroelim(bxtaalen, bxtaa, cdy, temp16b);
-
- bxtcclen = scale_expansion_zeroelim(4, cc, bdxtail, bxtcc);
- temp16clen = scale_expansion_zeroelim(bxtcclen, bxtcc, -ady, temp16c);
-
- temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (bdytail != 0.0) {
- bytcalen = scale_expansion_zeroelim(4, ca, bdytail, bytca);
- temp16alen = scale_expansion_zeroelim(bytcalen, bytca, 2.0 * bdy,
- temp16a);
-
- bytcclen = scale_expansion_zeroelim(4, cc, bdytail, bytcc);
- temp16blen = scale_expansion_zeroelim(bytcclen, bytcc, adx, temp16b);
-
- bytaalen = scale_expansion_zeroelim(4, aa, bdytail, bytaa);
- temp16clen = scale_expansion_zeroelim(bytaalen, bytaa, -cdx, temp16c);
-
- temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (cdxtail != 0.0) {
- cxtablen = scale_expansion_zeroelim(4, ab, cdxtail, cxtab);
- temp16alen = scale_expansion_zeroelim(cxtablen, cxtab, 2.0 * cdx,
- temp16a);
-
- cxtbblen = scale_expansion_zeroelim(4, bb, cdxtail, cxtbb);
- temp16blen = scale_expansion_zeroelim(cxtbblen, cxtbb, ady, temp16b);
-
- cxtaalen = scale_expansion_zeroelim(4, aa, cdxtail, cxtaa);
- temp16clen = scale_expansion_zeroelim(cxtaalen, cxtaa, -bdy, temp16c);
-
- temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (cdytail != 0.0) {
- cytablen = scale_expansion_zeroelim(4, ab, cdytail, cytab);
- temp16alen = scale_expansion_zeroelim(cytablen, cytab, 2.0 * cdy,
- temp16a);
-
- cytaalen = scale_expansion_zeroelim(4, aa, cdytail, cytaa);
- temp16blen = scale_expansion_zeroelim(cytaalen, cytaa, bdx, temp16b);
-
- cytbblen = scale_expansion_zeroelim(4, bb, cdytail, cytbb);
- temp16clen = scale_expansion_zeroelim(cytbblen, cytbb, -adx, temp16c);
-
- temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
-
- if ((adxtail != 0.0) || (adytail != 0.0)) {
- if ((bdxtail != 0.0) || (bdytail != 0.0)
- || (cdxtail != 0.0) || (cdytail != 0.0)) {
- Two_Product(bdxtail, cdy, ti1, ti0);
- Two_Product(bdx, cdytail, tj1, tj0);
- Two_Two_Sum(ti1, ti0, tj1, tj0, u3, u[2], u[1], u[0]);
- u[3] = u3;
- negate = -bdy;
- Two_Product(cdxtail, negate, ti1, ti0);
- negate = -bdytail;
- Two_Product(cdx, negate, tj1, tj0);
- Two_Two_Sum(ti1, ti0, tj1, tj0, v3, v[2], v[1], v[0]);
- v[3] = v3;
- bctlen = fast_expansion_sum_zeroelim(4, u, 4, v, bct);
-
- Two_Product(bdxtail, cdytail, ti1, ti0);
- Two_Product(cdxtail, bdytail, tj1, tj0);
- Two_Two_Diff(ti1, ti0, tj1, tj0, bctt3, bctt[2], bctt[1], bctt[0]);
- bctt[3] = bctt3;
- bcttlen = 4;
- } else {
- bct[0] = 0.0;
- bctlen = 1;
- bctt[0] = 0.0;
- bcttlen = 1;
- }
-
- if (adxtail != 0.0) {
- temp16alen = scale_expansion_zeroelim(axtbclen, axtbc, adxtail, temp16a);
- axtbctlen = scale_expansion_zeroelim(bctlen, bct, adxtail, axtbct);
- temp32alen = scale_expansion_zeroelim(axtbctlen, axtbct, 2.0 * adx,
- temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (bdytail != 0.0) {
- temp8len = scale_expansion_zeroelim(4, cc, adxtail, temp8);
- temp16alen = scale_expansion_zeroelim(temp8len, temp8, bdytail,
- temp16a);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
- temp16a, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (cdytail != 0.0) {
- temp8len = scale_expansion_zeroelim(4, bb, -adxtail, temp8);
- temp16alen = scale_expansion_zeroelim(temp8len, temp8, cdytail,
- temp16a);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
- temp16a, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
-
- temp32alen = scale_expansion_zeroelim(axtbctlen, axtbct, adxtail,
- temp32a);
- axtbcttlen = scale_expansion_zeroelim(bcttlen, bctt, adxtail, axtbctt);
- temp16alen = scale_expansion_zeroelim(axtbcttlen, axtbctt, 2.0 * adx,
- temp16a);
- temp16blen = scale_expansion_zeroelim(axtbcttlen, axtbctt, adxtail,
- temp16b);
- temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32b);
- temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
- temp64, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (adytail != 0.0) {
- temp16alen = scale_expansion_zeroelim(aytbclen, aytbc, adytail, temp16a);
- aytbctlen = scale_expansion_zeroelim(bctlen, bct, adytail, aytbct);
- temp32alen = scale_expansion_zeroelim(aytbctlen, aytbct, 2.0 * ady,
- temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
-
-
- temp32alen = scale_expansion_zeroelim(aytbctlen, aytbct, adytail,
- temp32a);
- aytbcttlen = scale_expansion_zeroelim(bcttlen, bctt, adytail, aytbctt);
- temp16alen = scale_expansion_zeroelim(aytbcttlen, aytbctt, 2.0 * ady,
- temp16a);
- temp16blen = scale_expansion_zeroelim(aytbcttlen, aytbctt, adytail,
- temp16b);
- temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32b);
- temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
- temp64, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- if ((bdxtail != 0.0) || (bdytail != 0.0)) {
- if ((cdxtail != 0.0) || (cdytail != 0.0)
- || (adxtail != 0.0) || (adytail != 0.0)) {
- Two_Product(cdxtail, ady, ti1, ti0);
- Two_Product(cdx, adytail, tj1, tj0);
- Two_Two_Sum(ti1, ti0, tj1, tj0, u3, u[2], u[1], u[0]);
- u[3] = u3;
- negate = -cdy;
- Two_Product(adxtail, negate, ti1, ti0);
- negate = -cdytail;
- Two_Product(adx, negate, tj1, tj0);
- Two_Two_Sum(ti1, ti0, tj1, tj0, v3, v[2], v[1], v[0]);
- v[3] = v3;
- catlen = fast_expansion_sum_zeroelim(4, u, 4, v, cat);
-
- Two_Product(cdxtail, adytail, ti1, ti0);
- Two_Product(adxtail, cdytail, tj1, tj0);
- Two_Two_Diff(ti1, ti0, tj1, tj0, catt3, catt[2], catt[1], catt[0]);
- catt[3] = catt3;
- cattlen = 4;
- } else {
- cat[0] = 0.0;
- catlen = 1;
- catt[0] = 0.0;
- cattlen = 1;
- }
-
- if (bdxtail != 0.0) {
- temp16alen = scale_expansion_zeroelim(bxtcalen, bxtca, bdxtail, temp16a);
- bxtcatlen = scale_expansion_zeroelim(catlen, cat, bdxtail, bxtcat);
- temp32alen = scale_expansion_zeroelim(bxtcatlen, bxtcat, 2.0 * bdx,
- temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (cdytail != 0.0) {
- temp8len = scale_expansion_zeroelim(4, aa, bdxtail, temp8);
- temp16alen = scale_expansion_zeroelim(temp8len, temp8, cdytail,
- temp16a);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
- temp16a, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (adytail != 0.0) {
- temp8len = scale_expansion_zeroelim(4, cc, -bdxtail, temp8);
- temp16alen = scale_expansion_zeroelim(temp8len, temp8, adytail,
- temp16a);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
- temp16a, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
-
- temp32alen = scale_expansion_zeroelim(bxtcatlen, bxtcat, bdxtail,
- temp32a);
- bxtcattlen = scale_expansion_zeroelim(cattlen, catt, bdxtail, bxtcatt);
- temp16alen = scale_expansion_zeroelim(bxtcattlen, bxtcatt, 2.0 * bdx,
- temp16a);
- temp16blen = scale_expansion_zeroelim(bxtcattlen, bxtcatt, bdxtail,
- temp16b);
- temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32b);
- temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
- temp64, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (bdytail != 0.0) {
- temp16alen = scale_expansion_zeroelim(bytcalen, bytca, bdytail, temp16a);
- bytcatlen = scale_expansion_zeroelim(catlen, cat, bdytail, bytcat);
- temp32alen = scale_expansion_zeroelim(bytcatlen, bytcat, 2.0 * bdy,
- temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
-
-
- temp32alen = scale_expansion_zeroelim(bytcatlen, bytcat, bdytail,
- temp32a);
- bytcattlen = scale_expansion_zeroelim(cattlen, catt, bdytail, bytcatt);
- temp16alen = scale_expansion_zeroelim(bytcattlen, bytcatt, 2.0 * bdy,
- temp16a);
- temp16blen = scale_expansion_zeroelim(bytcattlen, bytcatt, bdytail,
- temp16b);
- temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32b);
- temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
- temp64, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
- if ((cdxtail != 0.0) || (cdytail != 0.0)) {
- if ((adxtail != 0.0) || (adytail != 0.0)
- || (bdxtail != 0.0) || (bdytail != 0.0)) {
- Two_Product(adxtail, bdy, ti1, ti0);
- Two_Product(adx, bdytail, tj1, tj0);
- Two_Two_Sum(ti1, ti0, tj1, tj0, u3, u[2], u[1], u[0]);
- u[3] = u3;
- negate = -ady;
- Two_Product(bdxtail, negate, ti1, ti0);
- negate = -adytail;
- Two_Product(bdx, negate, tj1, tj0);
- Two_Two_Sum(ti1, ti0, tj1, tj0, v3, v[2], v[1], v[0]);
- v[3] = v3;
- abtlen = fast_expansion_sum_zeroelim(4, u, 4, v, abt);
-
- Two_Product(adxtail, bdytail, ti1, ti0);
- Two_Product(bdxtail, adytail, tj1, tj0);
- Two_Two_Diff(ti1, ti0, tj1, tj0, abtt3, abtt[2], abtt[1], abtt[0]);
- abtt[3] = abtt3;
- abttlen = 4;
- } else {
- abt[0] = 0.0;
- abtlen = 1;
- abtt[0] = 0.0;
- abttlen = 1;
- }
-
- if (cdxtail != 0.0) {
- temp16alen = scale_expansion_zeroelim(cxtablen, cxtab, cdxtail, temp16a);
- cxtabtlen = scale_expansion_zeroelim(abtlen, abt, cdxtail, cxtabt);
- temp32alen = scale_expansion_zeroelim(cxtabtlen, cxtabt, 2.0 * cdx,
- temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- if (adytail != 0.0) {
- temp8len = scale_expansion_zeroelim(4, bb, cdxtail, temp8);
- temp16alen = scale_expansion_zeroelim(temp8len, temp8, adytail,
- temp16a);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
- temp16a, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (bdytail != 0.0) {
- temp8len = scale_expansion_zeroelim(4, aa, -cdxtail, temp8);
- temp16alen = scale_expansion_zeroelim(temp8len, temp8, bdytail,
- temp16a);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
- temp16a, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
-
- temp32alen = scale_expansion_zeroelim(cxtabtlen, cxtabt, cdxtail,
- temp32a);
- cxtabttlen = scale_expansion_zeroelim(abttlen, abtt, cdxtail, cxtabtt);
- temp16alen = scale_expansion_zeroelim(cxtabttlen, cxtabtt, 2.0 * cdx,
- temp16a);
- temp16blen = scale_expansion_zeroelim(cxtabttlen, cxtabtt, cdxtail,
- temp16b);
- temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32b);
- temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
- temp64, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- if (cdytail != 0.0) {
- temp16alen = scale_expansion_zeroelim(cytablen, cytab, cdytail, temp16a);
- cytabtlen = scale_expansion_zeroelim(abtlen, abt, cdytail, cytabt);
- temp32alen = scale_expansion_zeroelim(cytabtlen, cytabt, 2.0 * cdy,
- temp32a);
- temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp32alen, temp32a, temp48);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
- temp48, finother);
- finswap = finnow; finnow = finother; finother = finswap;
-
-
- temp32alen = scale_expansion_zeroelim(cytabtlen, cytabt, cdytail,
- temp32a);
- cytabttlen = scale_expansion_zeroelim(abttlen, abtt, cdytail, cytabtt);
- temp16alen = scale_expansion_zeroelim(cytabttlen, cytabtt, 2.0 * cdy,
- temp16a);
- temp16blen = scale_expansion_zeroelim(cytabttlen, cytabtt, cdytail,
- temp16b);
- temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
- temp16blen, temp16b, temp32b);
- temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64);
- finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
- temp64, finother);
- finswap = finnow; finnow = finother; finother = finswap;
- }
- }
-
- return finnow[finlength - 1];
-}
-
-REAL incircle(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
-{
- REAL adx, bdx, cdx, ady, bdy, cdy;
- REAL bdxcdy, cdxbdy, cdxady, adxcdy, adxbdy, bdxady;
- REAL alift, blift, clift;
- REAL det;
- REAL permanent, errbound;
-
- adx = pa[0] - pd[0];
- bdx = pb[0] - pd[0];
- cdx = pc[0] - pd[0];
- ady = pa[1] - pd[1];
- bdy = pb[1] - pd[1];
- cdy = pc[1] - pd[1];
-
- bdxcdy = bdx * cdy;
- cdxbdy = cdx * bdy;
- alift = adx * adx + ady * ady;
-
- cdxady = cdx * ady;
- adxcdy = adx * cdy;
- blift = bdx * bdx + bdy * bdy;
-
- adxbdy = adx * bdy;
- bdxady = bdx * ady;
- clift = cdx * cdx + cdy * cdy;
-
- det = alift * (bdxcdy - cdxbdy)
- + blift * (cdxady - adxcdy)
- + clift * (adxbdy - bdxady);
-
- permanent = (Absolute(bdxcdy) + Absolute(cdxbdy)) * alift
- + (Absolute(cdxady) + Absolute(adxcdy)) * blift
- + (Absolute(adxbdy) + Absolute(bdxady)) * clift;
- errbound = iccerrboundA * permanent;
- if ((det > errbound) || (-det > errbound)) {
- return det;
- }
-
- return incircleadapt(pa, pb, pc, pd, permanent);
-}
-
-/*****************************************************************************/
-/* */
-/* inspherefast() Approximate 3D insphere test. Nonrobust. */
-/* insphereexact() Exact 3D insphere test. Robust. */
-/* insphereslow() Another exact 3D insphere test. Robust. */
-/* insphere() Adaptive exact 3D insphere test. Robust. */
-/* */
-/* Return a positive value if the point pe lies inside the */
-/* sphere passing through pa, pb, pc, and pd; a negative value */
-/* if it lies outside; and zero if the five points are */
-/* cospherical. The points pa, pb, pc, and pd must be ordered */
-/* so that they have a positive orientation (as defined by */
-/* orient3d()), or the sign of the result will be reversed. */
-/* */
-/* Only the first and last routine should be used; the middle two are for */
-/* timings. */
-/* */
-/* The last three use exact arithmetic to ensure a correct answer. The */
-/* result returned is the determinant of a matrix. In insphere() only, */
-/* this determinant is computed adaptively, in the sense that exact */
-/* arithmetic is used only to the degree it is needed to ensure that the */
-/* returned value has the correct sign. Hence, insphere() is usually quite */
-/* fast, but will run more slowly when the input points are cospherical or */
-/* nearly so. */
-/* */
-/*****************************************************************************/
-
-REAL inspherefast(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
-{
- REAL aex, bex, cex, dex;
- REAL aey, bey, cey, dey;
- REAL aez, bez, cez, dez;
- REAL alift, blift, clift, dlift;
- REAL ab, bc, cd, da, ac, bd;
- REAL abc, bcd, cda, dab;
-
- aex = pa[0] - pe[0];
- bex = pb[0] - pe[0];
- cex = pc[0] - pe[0];
- dex = pd[0] - pe[0];
- aey = pa[1] - pe[1];
- bey = pb[1] - pe[1];
- cey = pc[1] - pe[1];
- dey = pd[1] - pe[1];
- aez = pa[2] - pe[2];
- bez = pb[2] - pe[2];
- cez = pc[2] - pe[2];
- dez = pd[2] - pe[2];
-
- ab = aex * bey - bex * aey;
- bc = bex * cey - cex * bey;
- cd = cex * dey - dex * cey;
- da = dex * aey - aex * dey;
-
- ac = aex * cey - cex * aey;
- bd = bex * dey - dex * bey;
-
- abc = aez * bc - bez * ac + cez * ab;
- bcd = bez * cd - cez * bd + dez * bc;
- cda = cez * da + dez * ac + aez * cd;
- dab = dez * ab + aez * bd + bez * da;
-
- alift = aex * aex + aey * aey + aez * aez;
- blift = bex * bex + bey * bey + bez * bez;
- clift = cex * cex + cey * cey + cez * cez;
- dlift = dex * dex + dey * dey + dez * dez;
-
- return (dlift * abc - clift * dab) + (blift * cda - alift * bcd);
-}
-
-REAL insphereexact(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
-{
- INEXACT REAL axby1, bxcy1, cxdy1, dxey1, exay1;
- INEXACT REAL bxay1, cxby1, dxcy1, exdy1, axey1;
- INEXACT REAL axcy1, bxdy1, cxey1, dxay1, exby1;
- INEXACT REAL cxay1, dxby1, excy1, axdy1, bxey1;
- REAL axby0, bxcy0, cxdy0, dxey0, exay0;
- REAL bxay0, cxby0, dxcy0, exdy0, axey0;
- REAL axcy0, bxdy0, cxey0, dxay0, exby0;
- REAL cxay0, dxby0, excy0, axdy0, bxey0;
- REAL ab[4], bc[4], cd[4], de[4], ea[4];
- REAL ac[4], bd[4], ce[4], da[4], eb[4];
- REAL temp8a[8], temp8b[8], temp16[16];
- int temp8alen, temp8blen, temp16len;
- REAL abc[24], bcd[24], cde[24], dea[24], eab[24];
- REAL abd[24], bce[24], cda[24], deb[24], eac[24];
- int abclen, bcdlen, cdelen, dealen, eablen;
- int abdlen, bcelen, cdalen, deblen, eaclen;
- REAL temp48a[48], temp48b[48];
- int temp48alen, temp48blen;
- REAL abcd[96], bcde[96], cdea[96], deab[96], eabc[96];
- int abcdlen, bcdelen, cdealen, deablen, eabclen;
- REAL temp192[192];
- REAL det384x[384], det384y[384], det384z[384];
- int xlen, ylen, zlen;
- REAL detxy[768];
- int xylen;
- REAL adet[1152], bdet[1152], cdet[1152], ddet[1152], edet[1152];
- int alen, blen, clen, dlen, elen;
- REAL abdet[2304], cddet[2304], cdedet[3456];
- int ablen, cdlen;
- REAL deter[5760];
- int deterlen;
- int i;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- Two_Product(pa[0], pb[1], axby1, axby0);
- Two_Product(pb[0], pa[1], bxay1, bxay0);
- Two_Two_Diff(axby1, axby0, bxay1, bxay0, ab[3], ab[2], ab[1], ab[0]);
-
- Two_Product(pb[0], pc[1], bxcy1, bxcy0);
- Two_Product(pc[0], pb[1], cxby1, cxby0);
- Two_Two_Diff(bxcy1, bxcy0, cxby1, cxby0, bc[3], bc[2], bc[1], bc[0]);
-
- Two_Product(pc[0], pd[1], cxdy1, cxdy0);
- Two_Product(pd[0], pc[1], dxcy1, dxcy0);
- Two_Two_Diff(cxdy1, cxdy0, dxcy1, dxcy0, cd[3], cd[2], cd[1], cd[0]);
-
- Two_Product(pd[0], pe[1], dxey1, dxey0);
- Two_Product(pe[0], pd[1], exdy1, exdy0);
- Two_Two_Diff(dxey1, dxey0, exdy1, exdy0, de[3], de[2], de[1], de[0]);
-
- Two_Product(pe[0], pa[1], exay1, exay0);
- Two_Product(pa[0], pe[1], axey1, axey0);
- Two_Two_Diff(exay1, exay0, axey1, axey0, ea[3], ea[2], ea[1], ea[0]);
-
- Two_Product(pa[0], pc[1], axcy1, axcy0);
- Two_Product(pc[0], pa[1], cxay1, cxay0);
- Two_Two_Diff(axcy1, axcy0, cxay1, cxay0, ac[3], ac[2], ac[1], ac[0]);
-
- Two_Product(pb[0], pd[1], bxdy1, bxdy0);
- Two_Product(pd[0], pb[1], dxby1, dxby0);
- Two_Two_Diff(bxdy1, bxdy0, dxby1, dxby0, bd[3], bd[2], bd[1], bd[0]);
-
- Two_Product(pc[0], pe[1], cxey1, cxey0);
- Two_Product(pe[0], pc[1], excy1, excy0);
- Two_Two_Diff(cxey1, cxey0, excy1, excy0, ce[3], ce[2], ce[1], ce[0]);
-
- Two_Product(pd[0], pa[1], dxay1, dxay0);
- Two_Product(pa[0], pd[1], axdy1, axdy0);
- Two_Two_Diff(dxay1, dxay0, axdy1, axdy0, da[3], da[2], da[1], da[0]);
-
- Two_Product(pe[0], pb[1], exby1, exby0);
- Two_Product(pb[0], pe[1], bxey1, bxey0);
- Two_Two_Diff(exby1, exby0, bxey1, bxey0, eb[3], eb[2], eb[1], eb[0]);
-
- temp8alen = scale_expansion_zeroelim(4, bc, pa[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, ac, -pb[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, ab, pc[2], temp8a);
- abclen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- abc);
-
- temp8alen = scale_expansion_zeroelim(4, cd, pb[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, bd, -pc[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, bc, pd[2], temp8a);
- bcdlen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- bcd);
-
- temp8alen = scale_expansion_zeroelim(4, de, pc[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, ce, -pd[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, cd, pe[2], temp8a);
- cdelen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- cde);
-
- temp8alen = scale_expansion_zeroelim(4, ea, pd[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, da, -pe[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, de, pa[2], temp8a);
- dealen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- dea);
-
- temp8alen = scale_expansion_zeroelim(4, ab, pe[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, eb, -pa[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, ea, pb[2], temp8a);
- eablen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- eab);
-
- temp8alen = scale_expansion_zeroelim(4, bd, pa[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, da, pb[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, ab, pd[2], temp8a);
- abdlen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- abd);
-
- temp8alen = scale_expansion_zeroelim(4, ce, pb[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, eb, pc[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, bc, pe[2], temp8a);
- bcelen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- bce);
-
- temp8alen = scale_expansion_zeroelim(4, da, pc[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, ac, pd[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, cd, pa[2], temp8a);
- cdalen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- cda);
-
- temp8alen = scale_expansion_zeroelim(4, eb, pd[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, bd, pe[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, de, pb[2], temp8a);
- deblen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- deb);
-
- temp8alen = scale_expansion_zeroelim(4, ac, pe[2], temp8a);
- temp8blen = scale_expansion_zeroelim(4, ce, pa[2], temp8b);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
- temp16);
- temp8alen = scale_expansion_zeroelim(4, ea, pc[2], temp8a);
- eaclen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
- eac);
-
- temp48alen = fast_expansion_sum_zeroelim(cdelen, cde, bcelen, bce, temp48a);
- temp48blen = fast_expansion_sum_zeroelim(deblen, deb, bcdlen, bcd, temp48b);
- for (i = 0; i < temp48blen; i++) {
- temp48b[i] = -temp48b[i];
- }
- bcdelen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
- temp48blen, temp48b, bcde);
- xlen = scale_expansion_zeroelim(bcdelen, bcde, pa[0], temp192);
- xlen = scale_expansion_zeroelim(xlen, temp192, pa[0], det384x);
- ylen = scale_expansion_zeroelim(bcdelen, bcde, pa[1], temp192);
- ylen = scale_expansion_zeroelim(ylen, temp192, pa[1], det384y);
- zlen = scale_expansion_zeroelim(bcdelen, bcde, pa[2], temp192);
- zlen = scale_expansion_zeroelim(zlen, temp192, pa[2], det384z);
- xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
- alen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, adet);
-
- temp48alen = fast_expansion_sum_zeroelim(dealen, dea, cdalen, cda, temp48a);
- temp48blen = fast_expansion_sum_zeroelim(eaclen, eac, cdelen, cde, temp48b);
- for (i = 0; i < temp48blen; i++) {
- temp48b[i] = -temp48b[i];
- }
- cdealen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
- temp48blen, temp48b, cdea);
- xlen = scale_expansion_zeroelim(cdealen, cdea, pb[0], temp192);
- xlen = scale_expansion_zeroelim(xlen, temp192, pb[0], det384x);
- ylen = scale_expansion_zeroelim(cdealen, cdea, pb[1], temp192);
- ylen = scale_expansion_zeroelim(ylen, temp192, pb[1], det384y);
- zlen = scale_expansion_zeroelim(cdealen, cdea, pb[2], temp192);
- zlen = scale_expansion_zeroelim(zlen, temp192, pb[2], det384z);
- xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
- blen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, bdet);
-
- temp48alen = fast_expansion_sum_zeroelim(eablen, eab, deblen, deb, temp48a);
- temp48blen = fast_expansion_sum_zeroelim(abdlen, abd, dealen, dea, temp48b);
- for (i = 0; i < temp48blen; i++) {
- temp48b[i] = -temp48b[i];
- }
- deablen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
- temp48blen, temp48b, deab);
- xlen = scale_expansion_zeroelim(deablen, deab, pc[0], temp192);
- xlen = scale_expansion_zeroelim(xlen, temp192, pc[0], det384x);
- ylen = scale_expansion_zeroelim(deablen, deab, pc[1], temp192);
- ylen = scale_expansion_zeroelim(ylen, temp192, pc[1], det384y);
- zlen = scale_expansion_zeroelim(deablen, deab, pc[2], temp192);
- zlen = scale_expansion_zeroelim(zlen, temp192, pc[2], det384z);
- xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
- clen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, cdet);
-
- temp48alen = fast_expansion_sum_zeroelim(abclen, abc, eaclen, eac, temp48a);
- temp48blen = fast_expansion_sum_zeroelim(bcelen, bce, eablen, eab, temp48b);
- for (i = 0; i < temp48blen; i++) {
- temp48b[i] = -temp48b[i];
- }
- eabclen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
- temp48blen, temp48b, eabc);
- xlen = scale_expansion_zeroelim(eabclen, eabc, pd[0], temp192);
- xlen = scale_expansion_zeroelim(xlen, temp192, pd[0], det384x);
- ylen = scale_expansion_zeroelim(eabclen, eabc, pd[1], temp192);
- ylen = scale_expansion_zeroelim(ylen, temp192, pd[1], det384y);
- zlen = scale_expansion_zeroelim(eabclen, eabc, pd[2], temp192);
- zlen = scale_expansion_zeroelim(zlen, temp192, pd[2], det384z);
- xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
- dlen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, ddet);
-
- temp48alen = fast_expansion_sum_zeroelim(bcdlen, bcd, abdlen, abd, temp48a);
- temp48blen = fast_expansion_sum_zeroelim(cdalen, cda, abclen, abc, temp48b);
- for (i = 0; i < temp48blen; i++) {
- temp48b[i] = -temp48b[i];
- }
- abcdlen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
- temp48blen, temp48b, abcd);
- xlen = scale_expansion_zeroelim(abcdlen, abcd, pe[0], temp192);
- xlen = scale_expansion_zeroelim(xlen, temp192, pe[0], det384x);
- ylen = scale_expansion_zeroelim(abcdlen, abcd, pe[1], temp192);
- ylen = scale_expansion_zeroelim(ylen, temp192, pe[1], det384y);
- zlen = scale_expansion_zeroelim(abcdlen, abcd, pe[2], temp192);
- zlen = scale_expansion_zeroelim(zlen, temp192, pe[2], det384z);
- xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
- elen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, edet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
- cdelen = fast_expansion_sum_zeroelim(cdlen, cddet, elen, edet, cdedet);
- deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdelen, cdedet, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL insphereslow(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
-{
- INEXACT REAL aex, bex, cex, dex, aey, bey, cey, dey, aez, bez, cez, dez;
- REAL aextail, bextail, cextail, dextail;
- REAL aeytail, beytail, ceytail, deytail;
- REAL aeztail, beztail, ceztail, deztail;
- REAL negate, negatetail;
- INEXACT REAL axby7, bxcy7, cxdy7, dxay7, axcy7, bxdy7;
- INEXACT REAL bxay7, cxby7, dxcy7, axdy7, cxay7, dxby7;
- REAL axby[8], bxcy[8], cxdy[8], dxay[8], axcy[8], bxdy[8];
- REAL bxay[8], cxby[8], dxcy[8], axdy[8], cxay[8], dxby[8];
- REAL ab[16], bc[16], cd[16], da[16], ac[16], bd[16];
- int ablen, bclen, cdlen, dalen, aclen, bdlen;
- REAL temp32a[32], temp32b[32], temp64a[64], temp64b[64], temp64c[64];
- int temp32alen, temp32blen, temp64alen, temp64blen, temp64clen;
- REAL temp128[128], temp192[192];
- int temp128len, temp192len;
- REAL detx[384], detxx[768], detxt[384], detxxt[768], detxtxt[768];
- int xlen, xxlen, xtlen, xxtlen, xtxtlen;
- REAL x1[1536], x2[2304];
- int x1len, x2len;
- REAL dety[384], detyy[768], detyt[384], detyyt[768], detytyt[768];
- int ylen, yylen, ytlen, yytlen, ytytlen;
- REAL y1[1536], y2[2304];
- int y1len, y2len;
- REAL detz[384], detzz[768], detzt[384], detzzt[768], detztzt[768];
- int zlen, zzlen, ztlen, zztlen, ztztlen;
- REAL z1[1536], z2[2304];
- int z1len, z2len;
- REAL detxy[4608];
- int xylen;
- REAL adet[6912], bdet[6912], cdet[6912], ddet[6912];
- int alen, blen, clen, dlen;
- REAL abdet[13824], cddet[13824], deter[27648];
- int deterlen;
- int i;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j, _k, _l, _m, _n;
- REAL _0, _1, _2;
-
- Two_Diff(pa[0], pe[0], aex, aextail);
- Two_Diff(pa[1], pe[1], aey, aeytail);
- Two_Diff(pa[2], pe[2], aez, aeztail);
- Two_Diff(pb[0], pe[0], bex, bextail);
- Two_Diff(pb[1], pe[1], bey, beytail);
- Two_Diff(pb[2], pe[2], bez, beztail);
- Two_Diff(pc[0], pe[0], cex, cextail);
- Two_Diff(pc[1], pe[1], cey, ceytail);
- Two_Diff(pc[2], pe[2], cez, ceztail);
- Two_Diff(pd[0], pe[0], dex, dextail);
- Two_Diff(pd[1], pe[1], dey, deytail);
- Two_Diff(pd[2], pe[2], dez, deztail);
-
- Two_Two_Product(aex, aextail, bey, beytail,
- axby7, axby[6], axby[5], axby[4],
- axby[3], axby[2], axby[1], axby[0]);
- axby[7] = axby7;
- negate = -aey;
- negatetail = -aeytail;
- Two_Two_Product(bex, bextail, negate, negatetail,
- bxay7, bxay[6], bxay[5], bxay[4],
- bxay[3], bxay[2], bxay[1], bxay[0]);
- bxay[7] = bxay7;
- ablen = fast_expansion_sum_zeroelim(8, axby, 8, bxay, ab);
- Two_Two_Product(bex, bextail, cey, ceytail,
- bxcy7, bxcy[6], bxcy[5], bxcy[4],
- bxcy[3], bxcy[2], bxcy[1], bxcy[0]);
- bxcy[7] = bxcy7;
- negate = -bey;
- negatetail = -beytail;
- Two_Two_Product(cex, cextail, negate, negatetail,
- cxby7, cxby[6], cxby[5], cxby[4],
- cxby[3], cxby[2], cxby[1], cxby[0]);
- cxby[7] = cxby7;
- bclen = fast_expansion_sum_zeroelim(8, bxcy, 8, cxby, bc);
- Two_Two_Product(cex, cextail, dey, deytail,
- cxdy7, cxdy[6], cxdy[5], cxdy[4],
- cxdy[3], cxdy[2], cxdy[1], cxdy[0]);
- cxdy[7] = cxdy7;
- negate = -cey;
- negatetail = -ceytail;
- Two_Two_Product(dex, dextail, negate, negatetail,
- dxcy7, dxcy[6], dxcy[5], dxcy[4],
- dxcy[3], dxcy[2], dxcy[1], dxcy[0]);
- dxcy[7] = dxcy7;
- cdlen = fast_expansion_sum_zeroelim(8, cxdy, 8, dxcy, cd);
- Two_Two_Product(dex, dextail, aey, aeytail,
- dxay7, dxay[6], dxay[5], dxay[4],
- dxay[3], dxay[2], dxay[1], dxay[0]);
- dxay[7] = dxay7;
- negate = -dey;
- negatetail = -deytail;
- Two_Two_Product(aex, aextail, negate, negatetail,
- axdy7, axdy[6], axdy[5], axdy[4],
- axdy[3], axdy[2], axdy[1], axdy[0]);
- axdy[7] = axdy7;
- dalen = fast_expansion_sum_zeroelim(8, dxay, 8, axdy, da);
- Two_Two_Product(aex, aextail, cey, ceytail,
- axcy7, axcy[6], axcy[5], axcy[4],
- axcy[3], axcy[2], axcy[1], axcy[0]);
- axcy[7] = axcy7;
- negate = -aey;
- negatetail = -aeytail;
- Two_Two_Product(cex, cextail, negate, negatetail,
- cxay7, cxay[6], cxay[5], cxay[4],
- cxay[3], cxay[2], cxay[1], cxay[0]);
- cxay[7] = cxay7;
- aclen = fast_expansion_sum_zeroelim(8, axcy, 8, cxay, ac);
- Two_Two_Product(bex, bextail, dey, deytail,
- bxdy7, bxdy[6], bxdy[5], bxdy[4],
- bxdy[3], bxdy[2], bxdy[1], bxdy[0]);
- bxdy[7] = bxdy7;
- negate = -bey;
- negatetail = -beytail;
- Two_Two_Product(dex, dextail, negate, negatetail,
- dxby7, dxby[6], dxby[5], dxby[4],
- dxby[3], dxby[2], dxby[1], dxby[0]);
- dxby[7] = dxby7;
- bdlen = fast_expansion_sum_zeroelim(8, bxdy, 8, dxby, bd);
-
- temp32alen = scale_expansion_zeroelim(cdlen, cd, -bez, temp32a);
- temp32blen = scale_expansion_zeroelim(cdlen, cd, -beztail, temp32b);
- temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64a);
- temp32alen = scale_expansion_zeroelim(bdlen, bd, cez, temp32a);
- temp32blen = scale_expansion_zeroelim(bdlen, bd, ceztail, temp32b);
- temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64b);
- temp32alen = scale_expansion_zeroelim(bclen, bc, -dez, temp32a);
- temp32blen = scale_expansion_zeroelim(bclen, bc, -deztail, temp32b);
- temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64c);
- temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
- temp64blen, temp64b, temp128);
- temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
- temp128len, temp128, temp192);
- xlen = scale_expansion_zeroelim(temp192len, temp192, aex, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, aex, detxx);
- xtlen = scale_expansion_zeroelim(temp192len, temp192, aextail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, aex, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, aextail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
- ylen = scale_expansion_zeroelim(temp192len, temp192, aey, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, aey, detyy);
- ytlen = scale_expansion_zeroelim(temp192len, temp192, aeytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, aey, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, aeytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
- zlen = scale_expansion_zeroelim(temp192len, temp192, aez, detz);
- zzlen = scale_expansion_zeroelim(zlen, detz, aez, detzz);
- ztlen = scale_expansion_zeroelim(temp192len, temp192, aeztail, detzt);
- zztlen = scale_expansion_zeroelim(ztlen, detzt, aez, detzzt);
- for (i = 0; i < zztlen; i++) {
- detzzt[i] *= 2.0;
- }
- ztztlen = scale_expansion_zeroelim(ztlen, detzt, aeztail, detztzt);
- z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
- z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
- xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
- alen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, adet);
-
- temp32alen = scale_expansion_zeroelim(dalen, da, cez, temp32a);
- temp32blen = scale_expansion_zeroelim(dalen, da, ceztail, temp32b);
- temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64a);
- temp32alen = scale_expansion_zeroelim(aclen, ac, dez, temp32a);
- temp32blen = scale_expansion_zeroelim(aclen, ac, deztail, temp32b);
- temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64b);
- temp32alen = scale_expansion_zeroelim(cdlen, cd, aez, temp32a);
- temp32blen = scale_expansion_zeroelim(cdlen, cd, aeztail, temp32b);
- temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64c);
- temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
- temp64blen, temp64b, temp128);
- temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
- temp128len, temp128, temp192);
- xlen = scale_expansion_zeroelim(temp192len, temp192, bex, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, bex, detxx);
- xtlen = scale_expansion_zeroelim(temp192len, temp192, bextail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, bex, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, bextail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
- ylen = scale_expansion_zeroelim(temp192len, temp192, bey, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, bey, detyy);
- ytlen = scale_expansion_zeroelim(temp192len, temp192, beytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, bey, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, beytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
- zlen = scale_expansion_zeroelim(temp192len, temp192, bez, detz);
- zzlen = scale_expansion_zeroelim(zlen, detz, bez, detzz);
- ztlen = scale_expansion_zeroelim(temp192len, temp192, beztail, detzt);
- zztlen = scale_expansion_zeroelim(ztlen, detzt, bez, detzzt);
- for (i = 0; i < zztlen; i++) {
- detzzt[i] *= 2.0;
- }
- ztztlen = scale_expansion_zeroelim(ztlen, detzt, beztail, detztzt);
- z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
- z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
- xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
- blen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, bdet);
-
- temp32alen = scale_expansion_zeroelim(ablen, ab, -dez, temp32a);
- temp32blen = scale_expansion_zeroelim(ablen, ab, -deztail, temp32b);
- temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64a);
- temp32alen = scale_expansion_zeroelim(bdlen, bd, -aez, temp32a);
- temp32blen = scale_expansion_zeroelim(bdlen, bd, -aeztail, temp32b);
- temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64b);
- temp32alen = scale_expansion_zeroelim(dalen, da, -bez, temp32a);
- temp32blen = scale_expansion_zeroelim(dalen, da, -beztail, temp32b);
- temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64c);
- temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
- temp64blen, temp64b, temp128);
- temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
- temp128len, temp128, temp192);
- xlen = scale_expansion_zeroelim(temp192len, temp192, cex, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, cex, detxx);
- xtlen = scale_expansion_zeroelim(temp192len, temp192, cextail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, cex, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, cextail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
- ylen = scale_expansion_zeroelim(temp192len, temp192, cey, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, cey, detyy);
- ytlen = scale_expansion_zeroelim(temp192len, temp192, ceytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, cey, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, ceytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
- zlen = scale_expansion_zeroelim(temp192len, temp192, cez, detz);
- zzlen = scale_expansion_zeroelim(zlen, detz, cez, detzz);
- ztlen = scale_expansion_zeroelim(temp192len, temp192, ceztail, detzt);
- zztlen = scale_expansion_zeroelim(ztlen, detzt, cez, detzzt);
- for (i = 0; i < zztlen; i++) {
- detzzt[i] *= 2.0;
- }
- ztztlen = scale_expansion_zeroelim(ztlen, detzt, ceztail, detztzt);
- z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
- z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
- xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
- clen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, cdet);
-
- temp32alen = scale_expansion_zeroelim(bclen, bc, aez, temp32a);
- temp32blen = scale_expansion_zeroelim(bclen, bc, aeztail, temp32b);
- temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64a);
- temp32alen = scale_expansion_zeroelim(aclen, ac, -bez, temp32a);
- temp32blen = scale_expansion_zeroelim(aclen, ac, -beztail, temp32b);
- temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64b);
- temp32alen = scale_expansion_zeroelim(ablen, ab, cez, temp32a);
- temp32blen = scale_expansion_zeroelim(ablen, ab, ceztail, temp32b);
- temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
- temp32blen, temp32b, temp64c);
- temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
- temp64blen, temp64b, temp128);
- temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
- temp128len, temp128, temp192);
- xlen = scale_expansion_zeroelim(temp192len, temp192, dex, detx);
- xxlen = scale_expansion_zeroelim(xlen, detx, dex, detxx);
- xtlen = scale_expansion_zeroelim(temp192len, temp192, dextail, detxt);
- xxtlen = scale_expansion_zeroelim(xtlen, detxt, dex, detxxt);
- for (i = 0; i < xxtlen; i++) {
- detxxt[i] *= 2.0;
- }
- xtxtlen = scale_expansion_zeroelim(xtlen, detxt, dextail, detxtxt);
- x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
- x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
- ylen = scale_expansion_zeroelim(temp192len, temp192, dey, dety);
- yylen = scale_expansion_zeroelim(ylen, dety, dey, detyy);
- ytlen = scale_expansion_zeroelim(temp192len, temp192, deytail, detyt);
- yytlen = scale_expansion_zeroelim(ytlen, detyt, dey, detyyt);
- for (i = 0; i < yytlen; i++) {
- detyyt[i] *= 2.0;
- }
- ytytlen = scale_expansion_zeroelim(ytlen, detyt, deytail, detytyt);
- y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
- y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
- zlen = scale_expansion_zeroelim(temp192len, temp192, dez, detz);
- zzlen = scale_expansion_zeroelim(zlen, detz, dez, detzz);
- ztlen = scale_expansion_zeroelim(temp192len, temp192, deztail, detzt);
- zztlen = scale_expansion_zeroelim(ztlen, detzt, dez, detzzt);
- for (i = 0; i < zztlen; i++) {
- detzzt[i] *= 2.0;
- }
- ztztlen = scale_expansion_zeroelim(ztlen, detzt, deztail, detztzt);
- z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
- z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
- xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
- dlen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, ddet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
- deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, deter);
-
- return deter[deterlen - 1];
-}
-
-REAL insphereadapt(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe,
- REAL permanent)
-{
- INEXACT REAL aex, bex, cex, dex, aey, bey, cey, dey, aez, bez, cez, dez;
- REAL det, errbound;
-
- INEXACT REAL aexbey1, bexaey1, bexcey1, cexbey1;
- INEXACT REAL cexdey1, dexcey1, dexaey1, aexdey1;
- INEXACT REAL aexcey1, cexaey1, bexdey1, dexbey1;
- REAL aexbey0, bexaey0, bexcey0, cexbey0;
- REAL cexdey0, dexcey0, dexaey0, aexdey0;
- REAL aexcey0, cexaey0, bexdey0, dexbey0;
- REAL ab[4], bc[4], cd[4], da[4], ac[4], bd[4];
- INEXACT REAL ab3, bc3, cd3, da3, ac3, bd3;
- REAL abeps, bceps, cdeps, daeps, aceps, bdeps;
- REAL temp8a[8], temp8b[8], temp8c[8], temp16[16], temp24[24], temp48[48];
- int temp8alen, temp8blen, temp8clen, temp16len, temp24len, temp48len;
- REAL xdet[96], ydet[96], zdet[96], xydet[192];
- int xlen, ylen, zlen, xylen;
- REAL adet[288], bdet[288], cdet[288], ddet[288];
- int alen, blen, clen, dlen;
- REAL abdet[576], cddet[576];
- int ablen, cdlen;
- REAL fin1[1152];
- int finlength;
-
- REAL aextail, bextail, cextail, dextail;
- REAL aeytail, beytail, ceytail, deytail;
- REAL aeztail, beztail, ceztail, deztail;
-
- INEXACT REAL bvirt;
- REAL avirt, bround, around;
- INEXACT REAL c;
- INEXACT REAL abig;
- REAL ahi, alo, bhi, blo;
- REAL err1, err2, err3;
- INEXACT REAL _i, _j;
- REAL _0;
-
- aex = (REAL) (pa[0] - pe[0]);
- bex = (REAL) (pb[0] - pe[0]);
- cex = (REAL) (pc[0] - pe[0]);
- dex = (REAL) (pd[0] - pe[0]);
- aey = (REAL) (pa[1] - pe[1]);
- bey = (REAL) (pb[1] - pe[1]);
- cey = (REAL) (pc[1] - pe[1]);
- dey = (REAL) (pd[1] - pe[1]);
- aez = (REAL) (pa[2] - pe[2]);
- bez = (REAL) (pb[2] - pe[2]);
- cez = (REAL) (pc[2] - pe[2]);
- dez = (REAL) (pd[2] - pe[2]);
-
- Two_Product(aex, bey, aexbey1, aexbey0);
- Two_Product(bex, aey, bexaey1, bexaey0);
- Two_Two_Diff(aexbey1, aexbey0, bexaey1, bexaey0, ab3, ab[2], ab[1], ab[0]);
- ab[3] = ab3;
-
- Two_Product(bex, cey, bexcey1, bexcey0);
- Two_Product(cex, bey, cexbey1, cexbey0);
- Two_Two_Diff(bexcey1, bexcey0, cexbey1, cexbey0, bc3, bc[2], bc[1], bc[0]);
- bc[3] = bc3;
-
- Two_Product(cex, dey, cexdey1, cexdey0);
- Two_Product(dex, cey, dexcey1, dexcey0);
- Two_Two_Diff(cexdey1, cexdey0, dexcey1, dexcey0, cd3, cd[2], cd[1], cd[0]);
- cd[3] = cd3;
-
- Two_Product(dex, aey, dexaey1, dexaey0);
- Two_Product(aex, dey, aexdey1, aexdey0);
- Two_Two_Diff(dexaey1, dexaey0, aexdey1, aexdey0, da3, da[2], da[1], da[0]);
- da[3] = da3;
-
- Two_Product(aex, cey, aexcey1, aexcey0);
- Two_Product(cex, aey, cexaey1, cexaey0);
- Two_Two_Diff(aexcey1, aexcey0, cexaey1, cexaey0, ac3, ac[2], ac[1], ac[0]);
- ac[3] = ac3;
-
- Two_Product(bex, dey, bexdey1, bexdey0);
- Two_Product(dex, bey, dexbey1, dexbey0);
- Two_Two_Diff(bexdey1, bexdey0, dexbey1, dexbey0, bd3, bd[2], bd[1], bd[0]);
- bd[3] = bd3;
-
- temp8alen = scale_expansion_zeroelim(4, cd, bez, temp8a);
- temp8blen = scale_expansion_zeroelim(4, bd, -cez, temp8b);
- temp8clen = scale_expansion_zeroelim(4, bc, dez, temp8c);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
- temp8blen, temp8b, temp16);
- temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
- temp16len, temp16, temp24);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, aex, temp48);
- xlen = scale_expansion_zeroelim(temp48len, temp48, -aex, xdet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, aey, temp48);
- ylen = scale_expansion_zeroelim(temp48len, temp48, -aey, ydet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, aez, temp48);
- zlen = scale_expansion_zeroelim(temp48len, temp48, -aez, zdet);
- xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
- alen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, adet);
-
- temp8alen = scale_expansion_zeroelim(4, da, cez, temp8a);
- temp8blen = scale_expansion_zeroelim(4, ac, dez, temp8b);
- temp8clen = scale_expansion_zeroelim(4, cd, aez, temp8c);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
- temp8blen, temp8b, temp16);
- temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
- temp16len, temp16, temp24);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, bex, temp48);
- xlen = scale_expansion_zeroelim(temp48len, temp48, bex, xdet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, bey, temp48);
- ylen = scale_expansion_zeroelim(temp48len, temp48, bey, ydet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, bez, temp48);
- zlen = scale_expansion_zeroelim(temp48len, temp48, bez, zdet);
- xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
- blen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, bdet);
-
- temp8alen = scale_expansion_zeroelim(4, ab, dez, temp8a);
- temp8blen = scale_expansion_zeroelim(4, bd, aez, temp8b);
- temp8clen = scale_expansion_zeroelim(4, da, bez, temp8c);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
- temp8blen, temp8b, temp16);
- temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
- temp16len, temp16, temp24);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, cex, temp48);
- xlen = scale_expansion_zeroelim(temp48len, temp48, -cex, xdet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, cey, temp48);
- ylen = scale_expansion_zeroelim(temp48len, temp48, -cey, ydet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, cez, temp48);
- zlen = scale_expansion_zeroelim(temp48len, temp48, -cez, zdet);
- xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
- clen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, cdet);
-
- temp8alen = scale_expansion_zeroelim(4, bc, aez, temp8a);
- temp8blen = scale_expansion_zeroelim(4, ac, -bez, temp8b);
- temp8clen = scale_expansion_zeroelim(4, ab, cez, temp8c);
- temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
- temp8blen, temp8b, temp16);
- temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
- temp16len, temp16, temp24);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, dex, temp48);
- xlen = scale_expansion_zeroelim(temp48len, temp48, dex, xdet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, dey, temp48);
- ylen = scale_expansion_zeroelim(temp48len, temp48, dey, ydet);
- temp48len = scale_expansion_zeroelim(temp24len, temp24, dez, temp48);
- zlen = scale_expansion_zeroelim(temp48len, temp48, dez, zdet);
- xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
- dlen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, ddet);
-
- ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
- cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
- finlength = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, fin1);
-
- det = estimate(finlength, fin1);
- errbound = isperrboundB * permanent;
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- Two_Diff_Tail(pa[0], pe[0], aex, aextail);
- Two_Diff_Tail(pa[1], pe[1], aey, aeytail);
- Two_Diff_Tail(pa[2], pe[2], aez, aeztail);
- Two_Diff_Tail(pb[0], pe[0], bex, bextail);
- Two_Diff_Tail(pb[1], pe[1], bey, beytail);
- Two_Diff_Tail(pb[2], pe[2], bez, beztail);
- Two_Diff_Tail(pc[0], pe[0], cex, cextail);
- Two_Diff_Tail(pc[1], pe[1], cey, ceytail);
- Two_Diff_Tail(pc[2], pe[2], cez, ceztail);
- Two_Diff_Tail(pd[0], pe[0], dex, dextail);
- Two_Diff_Tail(pd[1], pe[1], dey, deytail);
- Two_Diff_Tail(pd[2], pe[2], dez, deztail);
- if ((aextail == 0.0) && (aeytail == 0.0) && (aeztail == 0.0)
- && (bextail == 0.0) && (beytail == 0.0) && (beztail == 0.0)
- && (cextail == 0.0) && (ceytail == 0.0) && (ceztail == 0.0)
- && (dextail == 0.0) && (deytail == 0.0) && (deztail == 0.0)) {
- return det;
- }
-
- errbound = isperrboundC * permanent + resulterrbound * Absolute(det);
- abeps = (aex * beytail + bey * aextail)
- - (aey * bextail + bex * aeytail);
- bceps = (bex * ceytail + cey * bextail)
- - (bey * cextail + cex * beytail);
- cdeps = (cex * deytail + dey * cextail)
- - (cey * dextail + dex * ceytail);
- daeps = (dex * aeytail + aey * dextail)
- - (dey * aextail + aex * deytail);
- aceps = (aex * ceytail + cey * aextail)
- - (aey * cextail + cex * aeytail);
- bdeps = (bex * deytail + dey * bextail)
- - (bey * dextail + dex * beytail);
- det += (((bex * bex + bey * bey + bez * bez)
- * ((cez * daeps + dez * aceps + aez * cdeps)
- + (ceztail * da3 + deztail * ac3 + aeztail * cd3))
- + (dex * dex + dey * dey + dez * dez)
- * ((aez * bceps - bez * aceps + cez * abeps)
- + (aeztail * bc3 - beztail * ac3 + ceztail * ab3)))
- - ((aex * aex + aey * aey + aez * aez)
- * ((bez * cdeps - cez * bdeps + dez * bceps)
- + (beztail * cd3 - ceztail * bd3 + deztail * bc3))
- + (cex * cex + cey * cey + cez * cez)
- * ((dez * abeps + aez * bdeps + bez * daeps)
- + (deztail * ab3 + aeztail * bd3 + beztail * da3))))
- + 2.0 * (((bex * bextail + bey * beytail + bez * beztail)
- * (cez * da3 + dez * ac3 + aez * cd3)
- + (dex * dextail + dey * deytail + dez * deztail)
- * (aez * bc3 - bez * ac3 + cez * ab3))
- - ((aex * aextail + aey * aeytail + aez * aeztail)
- * (bez * cd3 - cez * bd3 + dez * bc3)
- + (cex * cextail + cey * ceytail + cez * ceztail)
- * (dez * ab3 + aez * bd3 + bez * da3)));
- if ((det >= errbound) || (-det >= errbound)) {
- return det;
- }
-
- return insphereexact(pa, pb, pc, pd, pe);
-}
-
-REAL insphere(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
-{
- REAL aex, bex, cex, dex;
- REAL aey, bey, cey, dey;
- REAL aez, bez, cez, dez;
- REAL aexbey, bexaey, bexcey, cexbey, cexdey, dexcey, dexaey, aexdey;
- REAL aexcey, cexaey, bexdey, dexbey;
- REAL alift, blift, clift, dlift;
- REAL ab, bc, cd, da, ac, bd;
- REAL abc, bcd, cda, dab;
- REAL aezplus, bezplus, cezplus, dezplus;
- REAL aexbeyplus, bexaeyplus, bexceyplus, cexbeyplus;
- REAL cexdeyplus, dexceyplus, dexaeyplus, aexdeyplus;
- REAL aexceyplus, cexaeyplus, bexdeyplus, dexbeyplus;
- REAL det;
- REAL permanent, errbound;
-
- aex = pa[0] - pe[0];
- bex = pb[0] - pe[0];
- cex = pc[0] - pe[0];
- dex = pd[0] - pe[0];
- aey = pa[1] - pe[1];
- bey = pb[1] - pe[1];
- cey = pc[1] - pe[1];
- dey = pd[1] - pe[1];
- aez = pa[2] - pe[2];
- bez = pb[2] - pe[2];
- cez = pc[2] - pe[2];
- dez = pd[2] - pe[2];
-
- aexbey = aex * bey;
- bexaey = bex * aey;
- ab = aexbey - bexaey;
- bexcey = bex * cey;
- cexbey = cex * bey;
- bc = bexcey - cexbey;
- cexdey = cex * dey;
- dexcey = dex * cey;
- cd = cexdey - dexcey;
- dexaey = dex * aey;
- aexdey = aex * dey;
- da = dexaey - aexdey;
-
- aexcey = aex * cey;
- cexaey = cex * aey;
- ac = aexcey - cexaey;
- bexdey = bex * dey;
- dexbey = dex * bey;
- bd = bexdey - dexbey;
-
- abc = aez * bc - bez * ac + cez * ab;
- bcd = bez * cd - cez * bd + dez * bc;
- cda = cez * da + dez * ac + aez * cd;
- dab = dez * ab + aez * bd + bez * da;
-
- alift = aex * aex + aey * aey + aez * aez;
- blift = bex * bex + bey * bey + bez * bez;
- clift = cex * cex + cey * cey + cez * cez;
- dlift = dex * dex + dey * dey + dez * dez;
-
- det = (dlift * abc - clift * dab) + (blift * cda - alift * bcd);
-
- aezplus = Absolute(aez);
- bezplus = Absolute(bez);
- cezplus = Absolute(cez);
- dezplus = Absolute(dez);
- aexbeyplus = Absolute(aexbey);
- bexaeyplus = Absolute(bexaey);
- bexceyplus = Absolute(bexcey);
- cexbeyplus = Absolute(cexbey);
- cexdeyplus = Absolute(cexdey);
- dexceyplus = Absolute(dexcey);
- dexaeyplus = Absolute(dexaey);
- aexdeyplus = Absolute(aexdey);
- aexceyplus = Absolute(aexcey);
- cexaeyplus = Absolute(cexaey);
- bexdeyplus = Absolute(bexdey);
- dexbeyplus = Absolute(dexbey);
- permanent = ((cexdeyplus + dexceyplus) * bezplus
- + (dexbeyplus + bexdeyplus) * cezplus
- + (bexceyplus + cexbeyplus) * dezplus)
- * alift
- + ((dexaeyplus + aexdeyplus) * cezplus
- + (aexceyplus + cexaeyplus) * dezplus
- + (cexdeyplus + dexceyplus) * aezplus)
- * blift
- + ((aexbeyplus + bexaeyplus) * dezplus
- + (bexdeyplus + dexbeyplus) * aezplus
- + (dexaeyplus + aexdeyplus) * bezplus)
- * clift
- + ((bexceyplus + cexbeyplus) * aezplus
- + (cexaeyplus + aexceyplus) * bezplus
- + (aexbeyplus + bexaeyplus) * cezplus)
- * dlift;
- errbound = isperrboundA * permanent;
- if ((det > errbound) || (-det > errbound)) {
- return det;
- }
-
- return insphereadapt(pa, pb, pc, pd, pe, permanent);
-}
+/*****************************************************************************/
+/* */
+/* Routines for Arbitrary Precision Floating-point Arithmetic */
+/* and Fast Robust Geometric Predicates */
+/* (predicates.c) */
+/* */
+/* May 18, 1996 */
+/* */
+/* Placed in the public domain by */
+/* Jonathan Richard Shewchuk */
+/* School of Computer Science */
+/* Carnegie Mellon University */
+/* 5000 Forbes Avenue */
+/* Pittsburgh, Pennsylvania 15213-3891 */
+/* jrs@cs.cmu.edu */
+/* */
+/* This file contains C implementation of algorithms for exact addition */
+/* and multiplication of floating-point numbers, and predicates for */
+/* robustly performing the orientation and incircle tests used in */
+/* computational geometry. The algorithms and underlying theory are */
+/* described in Jonathan Richard Shewchuk. "Adaptive Precision Floating- */
+/* Point Arithmetic and Fast Robust Geometric Predicates." Technical */
+/* Report CMU-CS-96-140, School of Computer Science, Carnegie Mellon */
+/* University, Pittsburgh, Pennsylvania, May 1996. (Submitted to */
+/* Discrete & Computational Geometry.) */
+/* */
+/* This file, the paper listed above, and other information are available */
+/* from the Web page http://www.cs.cmu.edu/~quake/robust.html . */
+/* */
+/*****************************************************************************/
+
+/*****************************************************************************/
+/* */
+/* Using this code: */
+/* */
+/* First, read the short or long version of the paper (from the Web page */
+/* above). */
+/* */
+/* Be sure to call exactinit() once, before calling any of the arithmetic */
+/* functions or geometric predicates. Also be sure to turn on the */
+/* optimizer when compiling this file. */
+/* */
+/* */
+/* Several geometric predicates are defined. Their parameters are all */
+/* points. Each point is an array of two or three floating-point */
+/* numbers. The geometric predicates, described in the papers, are */
+/* */
+/* orient2d(pa, pb, pc) */
+/* orient2dfast(pa, pb, pc) */
+/* orient3d(pa, pb, pc, pd) */
+/* orient3dfast(pa, pb, pc, pd) */
+/* incircle(pa, pb, pc, pd) */
+/* incirclefast(pa, pb, pc, pd) */
+/* insphere(pa, pb, pc, pd, pe) */
+/* inspherefast(pa, pb, pc, pd, pe) */
+/* */
+/* Those with suffix "fast" are approximate, non-robust versions. Those */
+/* without the suffix are adaptive precision, robust versions. There */
+/* are also versions with the suffices "exact" and "slow", which are */
+/* non-adaptive, exact arithmetic versions, which I use only for timings */
+/* in my arithmetic papers. */
+/* */
+/* */
+/* An expansion is represented by an array of floating-point numbers, */
+/* sorted from smallest to largest magnitude (possibly with interspersed */
+/* zeros). The length of each expansion is stored as a separate integer, */
+/* and each arithmetic function returns an integer which is the length */
+/* of the expansion it created. */
+/* */
+/* Several arithmetic functions are defined. Their parameters are */
+/* */
+/* e, f Input expansions */
+/* elen, flen Lengths of input expansions (must be >= 1) */
+/* h Output expansion */
+/* b Input scalar */
+/* */
+/* The arithmetic functions are */
+/* */
+/* grow_expansion(elen, e, b, h) */
+/* grow_expansion_zeroelim(elen, e, b, h) */
+/* expansion_sum(elen, e, flen, f, h) */
+/* expansion_sum_zeroelim1(elen, e, flen, f, h) */
+/* expansion_sum_zeroelim2(elen, e, flen, f, h) */
+/* fast_expansion_sum(elen, e, flen, f, h) */
+/* fast_expansion_sum_zeroelim(elen, e, flen, f, h) */
+/* linear_expansion_sum(elen, e, flen, f, h) */
+/* linear_expansion_sum_zeroelim(elen, e, flen, f, h) */
+/* scale_expansion(elen, e, b, h) */
+/* scale_expansion_zeroelim(elen, e, b, h) */
+/* compress(elen, e, h) */
+/* */
+/* All of these are described in the long version of the paper; some are */
+/* described in the short version. All return an integer that is the */
+/* length of h. Those with suffix _zeroelim perform zero elimination, */
+/* and are recommended over their counterparts. The procedure */
+/* fast_expansion_sum_zeroelim() (or linear_expansion_sum_zeroelim() on */
+/* processors that do not use the round-to-even tiebreaking rule) is */
+/* recommended over expansion_sum_zeroelim(). Each procedure has a */
+/* little note next to it (in the code below) that tells you whether or */
+/* not the output expansion may be the same array as one of the input */
+/* expansions. */
+/* */
+/* */
+/* If you look around below, you'll also find macros for a bunch of */
+/* simple unrolled arithmetic operations, and procedures for printing */
+/* expansions (commented out because they don't work with all C */
+/* compilers) and for generating random floating-point numbers whose */
+/* significand bits are all random. Most of the macros have undocumented */
+/* requirements that certain of their parameters should not be the same */
+/* variable; for safety, better to make sure all the parameters are */
+/* distinct variables. Feel free to send email to jrs@cs.cmu.edu if you */
+/* have questions. */
+/* */
+/*****************************************************************************/
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <math.h>
+#ifdef CPU86
+#include <float.h>
+#endif /* CPU86 */
+#ifdef LINUX
+#include <fpu_control.h>
+#endif /* LINUX */
+
+#include "tetgen.h" // Defines the symbol REAL (float or double).
+
+/* On some machines, the exact arithmetic routines might be defeated by the */
+/* use of internal extended precision floating-point registers. Sometimes */
+/* this problem can be fixed by defining certain values to be volatile, */
+/* thus forcing them to be stored to memory and rounded off. This isn't */
+/* a great solution, though, as it slows the arithmetic down. */
+/* */
+/* To try this out, write "#define INEXACT volatile" below. Normally, */
+/* however, INEXACT should be defined to be nothing. ("#define INEXACT".) */
+
+#define INEXACT /* Nothing */
+/* #define INEXACT volatile */
+
+/* #define REAL double */ /* float or double */
+#define REALPRINT doubleprint
+#define REALRAND doublerand
+#define NARROWRAND narrowdoublerand
+#define UNIFORMRAND uniformdoublerand
+
+/* Which of the following two methods of finding the absolute values is */
+/* fastest is compiler-dependent. A few compilers can inline and optimize */
+/* the fabs() call; but most will incur the overhead of a function call, */
+/* which is disastrously slow. A faster way on IEEE machines might be to */
+/* mask the appropriate bit, but that's difficult to do in C. */
+
+#define Absolute(a) ((a) >= 0.0 ? (a) : -(a))
+/* #define Absolute(a) fabs(a) */
+
+/* Many of the operations are broken up into two pieces, a main part that */
+/* performs an approximate operation, and a "tail" that computes the */
+/* roundoff error of that operation. */
+/* */
+/* The operations Fast_Two_Sum(), Fast_Two_Diff(), Two_Sum(), Two_Diff(), */
+/* Split(), and Two_Product() are all implemented as described in the */
+/* reference. Each of these macros requires certain variables to be */
+/* defined in the calling routine. The variables `bvirt', `c', `abig', */
+/* `_i', `_j', `_k', `_l', `_m', and `_n' are declared `INEXACT' because */
+/* they store the result of an operation that may incur roundoff error. */
+/* The input parameter `x' (or the highest numbered `x_' parameter) must */
+/* also be declared `INEXACT'. */
+
+#define Fast_Two_Sum_Tail(a, b, x, y) \
+ bvirt = x - a; \
+ y = b - bvirt
+
+#define Fast_Two_Sum(a, b, x, y) \
+ x = (REAL) (a + b); \
+ Fast_Two_Sum_Tail(a, b, x, y)
+
+#define Fast_Two_Diff_Tail(a, b, x, y) \
+ bvirt = a - x; \
+ y = bvirt - b
+
+#define Fast_Two_Diff(a, b, x, y) \
+ x = (REAL) (a - b); \
+ Fast_Two_Diff_Tail(a, b, x, y)
+
+#define Two_Sum_Tail(a, b, x, y) \
+ bvirt = (REAL) (x - a); \
+ avirt = x - bvirt; \
+ bround = b - bvirt; \
+ around = a - avirt; \
+ y = around + bround
+
+#define Two_Sum(a, b, x, y) \
+ x = (REAL) (a + b); \
+ Two_Sum_Tail(a, b, x, y)
+
+#define Two_Diff_Tail(a, b, x, y) \
+ bvirt = (REAL) (a - x); \
+ avirt = x + bvirt; \
+ bround = bvirt - b; \
+ around = a - avirt; \
+ y = around + bround
+
+#define Two_Diff(a, b, x, y) \
+ x = (REAL) (a - b); \
+ Two_Diff_Tail(a, b, x, y)
+
+#define Split(a, ahi, alo) \
+ c = (REAL) (splitter * a); \
+ abig = (REAL) (c - a); \
+ ahi = c - abig; \
+ alo = a - ahi
+
+#define Two_Product_Tail(a, b, x, y) \
+ Split(a, ahi, alo); \
+ Split(b, bhi, blo); \
+ err1 = x - (ahi * bhi); \
+ err2 = err1 - (alo * bhi); \
+ err3 = err2 - (ahi * blo); \
+ y = (alo * blo) - err3
+
+#define Two_Product(a, b, x, y) \
+ x = (REAL) (a * b); \
+ Two_Product_Tail(a, b, x, y)
+
+/* Two_Product_Presplit() is Two_Product() where one of the inputs has */
+/* already been split. Avoids redundant splitting. */
+
+#define Two_Product_Presplit(a, b, bhi, blo, x, y) \
+ x = (REAL) (a * b); \
+ Split(a, ahi, alo); \
+ err1 = x - (ahi * bhi); \
+ err2 = err1 - (alo * bhi); \
+ err3 = err2 - (ahi * blo); \
+ y = (alo * blo) - err3
+
+/* Two_Product_2Presplit() is Two_Product() where both of the inputs have */
+/* already been split. Avoids redundant splitting. */
+
+#define Two_Product_2Presplit(a, ahi, alo, b, bhi, blo, x, y) \
+ x = (REAL) (a * b); \
+ err1 = x - (ahi * bhi); \
+ err2 = err1 - (alo * bhi); \
+ err3 = err2 - (ahi * blo); \
+ y = (alo * blo) - err3
+
+/* Square() can be done more quickly than Two_Product(). */
+
+#define Square_Tail(a, x, y) \
+ Split(a, ahi, alo); \
+ err1 = x - (ahi * ahi); \
+ err3 = err1 - ((ahi + ahi) * alo); \
+ y = (alo * alo) - err3
+
+#define Square(a, x, y) \
+ x = (REAL) (a * a); \
+ Square_Tail(a, x, y)
+
+/* Macros for summing expansions of various fixed lengths. These are all */
+/* unrolled versions of Expansion_Sum(). */
+
+#define Two_One_Sum(a1, a0, b, x2, x1, x0) \
+ Two_Sum(a0, b , _i, x0); \
+ Two_Sum(a1, _i, x2, x1)
+
+#define Two_One_Diff(a1, a0, b, x2, x1, x0) \
+ Two_Diff(a0, b , _i, x0); \
+ Two_Sum( a1, _i, x2, x1)
+
+#define Two_Two_Sum(a1, a0, b1, b0, x3, x2, x1, x0) \
+ Two_One_Sum(a1, a0, b0, _j, _0, x0); \
+ Two_One_Sum(_j, _0, b1, x3, x2, x1)
+
+#define Two_Two_Diff(a1, a0, b1, b0, x3, x2, x1, x0) \
+ Two_One_Diff(a1, a0, b0, _j, _0, x0); \
+ Two_One_Diff(_j, _0, b1, x3, x2, x1)
+
+#define Four_One_Sum(a3, a2, a1, a0, b, x4, x3, x2, x1, x0) \
+ Two_One_Sum(a1, a0, b , _j, x1, x0); \
+ Two_One_Sum(a3, a2, _j, x4, x3, x2)
+
+#define Four_Two_Sum(a3, a2, a1, a0, b1, b0, x5, x4, x3, x2, x1, x0) \
+ Four_One_Sum(a3, a2, a1, a0, b0, _k, _2, _1, _0, x0); \
+ Four_One_Sum(_k, _2, _1, _0, b1, x5, x4, x3, x2, x1)
+
+#define Four_Four_Sum(a3, a2, a1, a0, b4, b3, b1, b0, x7, x6, x5, x4, x3, x2, \
+ x1, x0) \
+ Four_Two_Sum(a3, a2, a1, a0, b1, b0, _l, _2, _1, _0, x1, x0); \
+ Four_Two_Sum(_l, _2, _1, _0, b4, b3, x7, x6, x5, x4, x3, x2)
+
+#define Eight_One_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b, x8, x7, x6, x5, x4, \
+ x3, x2, x1, x0) \
+ Four_One_Sum(a3, a2, a1, a0, b , _j, x3, x2, x1, x0); \
+ Four_One_Sum(a7, a6, a5, a4, _j, x8, x7, x6, x5, x4)
+
+#define Eight_Two_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b1, b0, x9, x8, x7, \
+ x6, x5, x4, x3, x2, x1, x0) \
+ Eight_One_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b0, _k, _6, _5, _4, _3, _2, \
+ _1, _0, x0); \
+ Eight_One_Sum(_k, _6, _5, _4, _3, _2, _1, _0, b1, x9, x8, x7, x6, x5, x4, \
+ x3, x2, x1)
+
+#define Eight_Four_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b4, b3, b1, b0, x11, \
+ x10, x9, x8, x7, x6, x5, x4, x3, x2, x1, x0) \
+ Eight_Two_Sum(a7, a6, a5, a4, a3, a2, a1, a0, b1, b0, _l, _6, _5, _4, _3, \
+ _2, _1, _0, x1, x0); \
+ Eight_Two_Sum(_l, _6, _5, _4, _3, _2, _1, _0, b4, b3, x11, x10, x9, x8, \
+ x7, x6, x5, x4, x3, x2)
+
+/* Macros for multiplying expansions of various fixed lengths. */
+
+#define Two_One_Product(a1, a0, b, x3, x2, x1, x0) \
+ Split(b, bhi, blo); \
+ Two_Product_Presplit(a0, b, bhi, blo, _i, x0); \
+ Two_Product_Presplit(a1, b, bhi, blo, _j, _0); \
+ Two_Sum(_i, _0, _k, x1); \
+ Fast_Two_Sum(_j, _k, x3, x2)
+
+#define Four_One_Product(a3, a2, a1, a0, b, x7, x6, x5, x4, x3, x2, x1, x0) \
+ Split(b, bhi, blo); \
+ Two_Product_Presplit(a0, b, bhi, blo, _i, x0); \
+ Two_Product_Presplit(a1, b, bhi, blo, _j, _0); \
+ Two_Sum(_i, _0, _k, x1); \
+ Fast_Two_Sum(_j, _k, _i, x2); \
+ Two_Product_Presplit(a2, b, bhi, blo, _j, _0); \
+ Two_Sum(_i, _0, _k, x3); \
+ Fast_Two_Sum(_j, _k, _i, x4); \
+ Two_Product_Presplit(a3, b, bhi, blo, _j, _0); \
+ Two_Sum(_i, _0, _k, x5); \
+ Fast_Two_Sum(_j, _k, x7, x6)
+
+#define Two_Two_Product(a1, a0, b1, b0, x7, x6, x5, x4, x3, x2, x1, x0) \
+ Split(a0, a0hi, a0lo); \
+ Split(b0, bhi, blo); \
+ Two_Product_2Presplit(a0, a0hi, a0lo, b0, bhi, blo, _i, x0); \
+ Split(a1, a1hi, a1lo); \
+ Two_Product_2Presplit(a1, a1hi, a1lo, b0, bhi, blo, _j, _0); \
+ Two_Sum(_i, _0, _k, _1); \
+ Fast_Two_Sum(_j, _k, _l, _2); \
+ Split(b1, bhi, blo); \
+ Two_Product_2Presplit(a0, a0hi, a0lo, b1, bhi, blo, _i, _0); \
+ Two_Sum(_1, _0, _k, x1); \
+ Two_Sum(_2, _k, _j, _1); \
+ Two_Sum(_l, _j, _m, _2); \
+ Two_Product_2Presplit(a1, a1hi, a1lo, b1, bhi, blo, _j, _0); \
+ Two_Sum(_i, _0, _n, _0); \
+ Two_Sum(_1, _0, _i, x2); \
+ Two_Sum(_2, _i, _k, _1); \
+ Two_Sum(_m, _k, _l, _2); \
+ Two_Sum(_j, _n, _k, _0); \
+ Two_Sum(_1, _0, _j, x3); \
+ Two_Sum(_2, _j, _i, _1); \
+ Two_Sum(_l, _i, _m, _2); \
+ Two_Sum(_1, _k, _i, x4); \
+ Two_Sum(_2, _i, _k, x5); \
+ Two_Sum(_m, _k, x7, x6)
+
+/* An expansion of length two can be squared more quickly than finding the */
+/* product of two different expansions of length two, and the result is */
+/* guaranteed to have no more than six (rather than eight) components. */
+
+#define Two_Square(a1, a0, x5, x4, x3, x2, x1, x0) \
+ Square(a0, _j, x0); \
+ _0 = a0 + a0; \
+ Two_Product(a1, _0, _k, _1); \
+ Two_One_Sum(_k, _1, _j, _l, _2, x1); \
+ Square(a1, _j, _1); \
+ Two_Two_Sum(_j, _1, _l, _2, x5, x4, x3, x2)
+
+/* splitter = 2^ceiling(p / 2) + 1. Used to split floats in half. */
+static REAL splitter;
+static REAL epsilon; /* = 2^(-p). Used to estimate roundoff errors. */
+/* A set of coefficients used to calculate maximum roundoff errors. */
+static REAL resulterrbound;
+static REAL ccwerrboundA, ccwerrboundB, ccwerrboundC;
+static REAL o3derrboundA, o3derrboundB, o3derrboundC;
+static REAL iccerrboundA, iccerrboundB, iccerrboundC;
+static REAL isperrboundA, isperrboundB, isperrboundC;
+
+/*****************************************************************************/
+/* */
+/* doubleprint() Print the bit representation of a double. */
+/* */
+/* Useful for debugging exact arithmetic routines. */
+/* */
+/*****************************************************************************/
+
+/*
+void doubleprint(number)
+double number;
+{
+ unsigned long long no;
+ unsigned long long sign, expo;
+ int exponent;
+ int i, bottomi;
+
+ no = *(unsigned long long *) &number;
+ sign = no & 0x8000000000000000ll;
+ expo = (no >> 52) & 0x7ffll;
+ exponent = (int) expo;
+ exponent = exponent - 1023;
+ if (sign) {
+ printf("-");
+ } else {
+ printf(" ");
+ }
+ if (exponent == -1023) {
+ printf(
+ "0.0000000000000000000000000000000000000000000000000000_ ( )");
+ } else {
+ printf("1.");
+ bottomi = -1;
+ for (i = 0; i < 52; i++) {
+ if (no & 0x0008000000000000ll) {
+ printf("1");
+ bottomi = i;
+ } else {
+ printf("0");
+ }
+ no <<= 1;
+ }
+ printf("_%d (%d)", exponent, exponent - 1 - bottomi);
+ }
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* floatprint() Print the bit representation of a float. */
+/* */
+/* Useful for debugging exact arithmetic routines. */
+/* */
+/*****************************************************************************/
+
+/*
+void floatprint(number)
+float number;
+{
+ unsigned no;
+ unsigned sign, expo;
+ int exponent;
+ int i, bottomi;
+
+ no = *(unsigned *) &number;
+ sign = no & 0x80000000;
+ expo = (no >> 23) & 0xff;
+ exponent = (int) expo;
+ exponent = exponent - 127;
+ if (sign) {
+ printf("-");
+ } else {
+ printf(" ");
+ }
+ if (exponent == -127) {
+ printf("0.00000000000000000000000_ ( )");
+ } else {
+ printf("1.");
+ bottomi = -1;
+ for (i = 0; i < 23; i++) {
+ if (no & 0x00400000) {
+ printf("1");
+ bottomi = i;
+ } else {
+ printf("0");
+ }
+ no <<= 1;
+ }
+ printf("_%3d (%3d)", exponent, exponent - 1 - bottomi);
+ }
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* expansion_print() Print the bit representation of an expansion. */
+/* */
+/* Useful for debugging exact arithmetic routines. */
+/* */
+/*****************************************************************************/
+
+/*
+void expansion_print(elen, e)
+int elen;
+REAL *e;
+{
+ int i;
+
+ for (i = elen - 1; i >= 0; i--) {
+ REALPRINT(e[i]);
+ if (i > 0) {
+ printf(" +\n");
+ } else {
+ printf("\n");
+ }
+ }
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* doublerand() Generate a double with random 53-bit significand and a */
+/* random exponent in [0, 511]. */
+/* */
+/*****************************************************************************/
+
+/*
+double doublerand()
+{
+ double result;
+ double expo;
+ long a, b, c;
+ long i;
+
+ a = random();
+ b = random();
+ c = random();
+ result = (double) (a - 1073741824) * 8388608.0 + (double) (b >> 8);
+ for (i = 512, expo = 2; i <= 131072; i *= 2, expo = expo * expo) {
+ if (c & i) {
+ result *= expo;
+ }
+ }
+ return result;
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* narrowdoublerand() Generate a double with random 53-bit significand */
+/* and a random exponent in [0, 7]. */
+/* */
+/*****************************************************************************/
+
+/*
+double narrowdoublerand()
+{
+ double result;
+ double expo;
+ long a, b, c;
+ long i;
+
+ a = random();
+ b = random();
+ c = random();
+ result = (double) (a - 1073741824) * 8388608.0 + (double) (b >> 8);
+ for (i = 512, expo = 2; i <= 2048; i *= 2, expo = expo * expo) {
+ if (c & i) {
+ result *= expo;
+ }
+ }
+ return result;
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* uniformdoublerand() Generate a double with random 53-bit significand. */
+/* */
+/*****************************************************************************/
+
+/*
+double uniformdoublerand()
+{
+ double result;
+ long a, b;
+
+ a = random();
+ b = random();
+ result = (double) (a - 1073741824) * 8388608.0 + (double) (b >> 8);
+ return result;
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* floatrand() Generate a float with random 24-bit significand and a */
+/* random exponent in [0, 63]. */
+/* */
+/*****************************************************************************/
+
+/*
+float floatrand()
+{
+ float result;
+ float expo;
+ long a, c;
+ long i;
+
+ a = random();
+ c = random();
+ result = (float) ((a - 1073741824) >> 6);
+ for (i = 512, expo = 2; i <= 16384; i *= 2, expo = expo * expo) {
+ if (c & i) {
+ result *= expo;
+ }
+ }
+ return result;
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* narrowfloatrand() Generate a float with random 24-bit significand and */
+/* a random exponent in [0, 7]. */
+/* */
+/*****************************************************************************/
+
+/*
+float narrowfloatrand()
+{
+ float result;
+ float expo;
+ long a, c;
+ long i;
+
+ a = random();
+ c = random();
+ result = (float) ((a - 1073741824) >> 6);
+ for (i = 512, expo = 2; i <= 2048; i *= 2, expo = expo * expo) {
+ if (c & i) {
+ result *= expo;
+ }
+ }
+ return result;
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* uniformfloatrand() Generate a float with random 24-bit significand. */
+/* */
+/*****************************************************************************/
+
+/*
+float uniformfloatrand()
+{
+ float result;
+ long a;
+
+ a = random();
+ result = (float) ((a - 1073741824) >> 6);
+ return result;
+}
+*/
+
+/*****************************************************************************/
+/* */
+/* exactinit() Initialize the variables used for exact arithmetic. */
+/* */
+/* `epsilon' is the largest power of two such that 1.0 + epsilon = 1.0 in */
+/* floating-point arithmetic. `epsilon' bounds the relative roundoff */
+/* error. It is used for floating-point error analysis. */
+/* */
+/* `splitter' is used to split floating-point numbers into two half- */
+/* length significands for exact multiplication. */
+/* */
+/* I imagine that a highly optimizing compiler might be too smart for its */
+/* own good, and somehow cause this routine to fail, if it pretends that */
+/* floating-point arithmetic is too much like real arithmetic. */
+/* */
+/* Don't change this routine unless you fully understand it. */
+/* */
+/*****************************************************************************/
+
+REAL exactinit()
+{
+ REAL half;
+ REAL check, lastcheck;
+ int every_other;
+#ifdef LINUX
+ int cword;
+#endif /* LINUX */
+
+#ifdef CPU86
+#ifdef SINGLE
+ _control87(_PC_24, _MCW_PC); /* Set FPU control word for single precision. */
+#else /* not SINGLE */
+ _control87(_PC_53, _MCW_PC); /* Set FPU control word for double precision. */
+#endif /* not SINGLE */
+#endif /* CPU86 */
+#ifdef LINUX
+#ifdef SINGLE
+ /* cword = 4223; */
+ cword = 4210; /* set FPU control word for single precision */
+#else /* not SINGLE */
+ /* cword = 4735; */
+ cword = 4722; /* set FPU control word for double precision */
+#endif /* not SINGLE */
+ _FPU_SETCW(cword);
+#endif /* LINUX */
+
+ every_other = 1;
+ half = 0.5;
+ epsilon = 1.0;
+ splitter = 1.0;
+ check = 1.0;
+ /* Repeatedly divide `epsilon' by two until it is too small to add to */
+ /* one without causing roundoff. (Also check if the sum is equal to */
+ /* the previous sum, for machines that round up instead of using exact */
+ /* rounding. Not that this library will work on such machines anyway. */
+ do {
+ lastcheck = check;
+ epsilon *= half;
+ if (every_other) {
+ splitter *= 2.0;
+ }
+ every_other = !every_other;
+ check = 1.0 + epsilon;
+ } while ((check != 1.0) && (check != lastcheck));
+ splitter += 1.0;
+
+ /* Error bounds for orientation and incircle tests. */
+ resulterrbound = (3.0 + 8.0 * epsilon) * epsilon;
+ ccwerrboundA = (3.0 + 16.0 * epsilon) * epsilon;
+ ccwerrboundB = (2.0 + 12.0 * epsilon) * epsilon;
+ ccwerrboundC = (9.0 + 64.0 * epsilon) * epsilon * epsilon;
+ o3derrboundA = (7.0 + 56.0 * epsilon) * epsilon;
+ o3derrboundB = (3.0 + 28.0 * epsilon) * epsilon;
+ o3derrboundC = (26.0 + 288.0 * epsilon) * epsilon * epsilon;
+ iccerrboundA = (10.0 + 96.0 * epsilon) * epsilon;
+ iccerrboundB = (4.0 + 48.0 * epsilon) * epsilon;
+ iccerrboundC = (44.0 + 576.0 * epsilon) * epsilon * epsilon;
+ isperrboundA = (16.0 + 224.0 * epsilon) * epsilon;
+ isperrboundB = (5.0 + 72.0 * epsilon) * epsilon;
+ isperrboundC = (71.0 + 1408.0 * epsilon) * epsilon * epsilon;
+
+ return epsilon; /* Added by H. Si 30 Juli, 2004. */
+}
+
+/*****************************************************************************/
+/* */
+/* grow_expansion() Add a scalar to an expansion. */
+/* */
+/* Sets h = e + b. See the long version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
+/* properties as well. (That is, if e has one of these properties, so */
+/* will h.) */
+/* */
+/*****************************************************************************/
+
+int grow_expansion(int elen, REAL *e, REAL b, REAL *h)
+/* e and h can be the same. */
+{
+ REAL Q;
+ INEXACT REAL Qnew;
+ int eindex;
+ REAL enow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+
+ Q = b;
+ for (eindex = 0; eindex < elen; eindex++) {
+ enow = e[eindex];
+ Two_Sum(Q, enow, Qnew, h[eindex]);
+ Q = Qnew;
+ }
+ h[eindex] = Q;
+ return eindex + 1;
+}
+
+/*****************************************************************************/
+/* */
+/* grow_expansion_zeroelim() Add a scalar to an expansion, eliminating */
+/* zero components from the output expansion. */
+/* */
+/* Sets h = e + b. See the long version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
+/* properties as well. (That is, if e has one of these properties, so */
+/* will h.) */
+/* */
+/*****************************************************************************/
+
+int grow_expansion_zeroelim(int elen, REAL *e, REAL b, REAL *h)
+/* e and h can be the same. */
+{
+ REAL Q, hh;
+ INEXACT REAL Qnew;
+ int eindex, hindex;
+ REAL enow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+
+ hindex = 0;
+ Q = b;
+ for (eindex = 0; eindex < elen; eindex++) {
+ enow = e[eindex];
+ Two_Sum(Q, enow, Qnew, hh);
+ Q = Qnew;
+ if (hh != 0.0) {
+ h[hindex++] = hh;
+ }
+ }
+ if ((Q != 0.0) || (hindex == 0)) {
+ h[hindex++] = Q;
+ }
+ return hindex;
+}
+
+/*****************************************************************************/
+/* */
+/* expansion_sum() Sum two expansions. */
+/* */
+/* Sets h = e + f. See the long version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the nonadjacent property as well. (That is, */
+/* if e has one of these properties, so will h.) Does NOT maintain the */
+/* strongly nonoverlapping property. */
+/* */
+/*****************************************************************************/
+
+int expansion_sum(int elen, REAL *e, int flen, REAL *f, REAL *h)
+/* e and h can be the same, but f and h cannot. */
+{
+ REAL Q;
+ INEXACT REAL Qnew;
+ int findex, hindex, hlast;
+ REAL hnow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+
+ Q = f[0];
+ for (hindex = 0; hindex < elen; hindex++) {
+ hnow = e[hindex];
+ Two_Sum(Q, hnow, Qnew, h[hindex]);
+ Q = Qnew;
+ }
+ h[hindex] = Q;
+ hlast = hindex;
+ for (findex = 1; findex < flen; findex++) {
+ Q = f[findex];
+ for (hindex = findex; hindex <= hlast; hindex++) {
+ hnow = h[hindex];
+ Two_Sum(Q, hnow, Qnew, h[hindex]);
+ Q = Qnew;
+ }
+ h[++hlast] = Q;
+ }
+ return hlast + 1;
+}
+
+/*****************************************************************************/
+/* */
+/* expansion_sum_zeroelim1() Sum two expansions, eliminating zero */
+/* components from the output expansion. */
+/* */
+/* Sets h = e + f. See the long version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the nonadjacent property as well. (That is, */
+/* if e has one of these properties, so will h.) Does NOT maintain the */
+/* strongly nonoverlapping property. */
+/* */
+/*****************************************************************************/
+
+int expansion_sum_zeroelim1(int elen, REAL *e, int flen, REAL *f, REAL *h)
+/* e and h can be the same, but f and h cannot. */
+{
+ REAL Q;
+ INEXACT REAL Qnew;
+ int index, findex, hindex, hlast;
+ REAL hnow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+
+ Q = f[0];
+ for (hindex = 0; hindex < elen; hindex++) {
+ hnow = e[hindex];
+ Two_Sum(Q, hnow, Qnew, h[hindex]);
+ Q = Qnew;
+ }
+ h[hindex] = Q;
+ hlast = hindex;
+ for (findex = 1; findex < flen; findex++) {
+ Q = f[findex];
+ for (hindex = findex; hindex <= hlast; hindex++) {
+ hnow = h[hindex];
+ Two_Sum(Q, hnow, Qnew, h[hindex]);
+ Q = Qnew;
+ }
+ h[++hlast] = Q;
+ }
+ hindex = -1;
+ for (index = 0; index <= hlast; index++) {
+ hnow = h[index];
+ if (hnow != 0.0) {
+ h[++hindex] = hnow;
+ }
+ }
+ if (hindex == -1) {
+ return 1;
+ } else {
+ return hindex + 1;
+ }
+}
+
+/*****************************************************************************/
+/* */
+/* expansion_sum_zeroelim2() Sum two expansions, eliminating zero */
+/* components from the output expansion. */
+/* */
+/* Sets h = e + f. See the long version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the nonadjacent property as well. (That is, */
+/* if e has one of these properties, so will h.) Does NOT maintain the */
+/* strongly nonoverlapping property. */
+/* */
+/*****************************************************************************/
+
+int expansion_sum_zeroelim2(int elen, REAL *e, int flen, REAL *f, REAL *h)
+/* e and h can be the same, but f and h cannot. */
+{
+ REAL Q, hh;
+ INEXACT REAL Qnew;
+ int eindex, findex, hindex, hlast;
+ REAL enow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+
+ hindex = 0;
+ Q = f[0];
+ for (eindex = 0; eindex < elen; eindex++) {
+ enow = e[eindex];
+ Two_Sum(Q, enow, Qnew, hh);
+ Q = Qnew;
+ if (hh != 0.0) {
+ h[hindex++] = hh;
+ }
+ }
+ h[hindex] = Q;
+ hlast = hindex;
+ for (findex = 1; findex < flen; findex++) {
+ hindex = 0;
+ Q = f[findex];
+ for (eindex = 0; eindex <= hlast; eindex++) {
+ enow = h[eindex];
+ Two_Sum(Q, enow, Qnew, hh);
+ Q = Qnew;
+ if (hh != 0) {
+ h[hindex++] = hh;
+ }
+ }
+ h[hindex] = Q;
+ hlast = hindex;
+ }
+ return hlast + 1;
+}
+
+/*****************************************************************************/
+/* */
+/* fast_expansion_sum() Sum two expansions. */
+/* */
+/* Sets h = e + f. See the long version of my paper for details. */
+/* */
+/* If round-to-even is used (as with IEEE 754), maintains the strongly */
+/* nonoverlapping property. (That is, if e is strongly nonoverlapping, h */
+/* will be also.) Does NOT maintain the nonoverlapping or nonadjacent */
+/* properties. */
+/* */
+/*****************************************************************************/
+
+int fast_expansion_sum(int elen, REAL *e, int flen, REAL *f, REAL *h)
+/* h cannot be e or f. */
+{
+ REAL Q;
+ INEXACT REAL Qnew;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ int eindex, findex, hindex;
+ REAL enow, fnow;
+
+ enow = e[0];
+ fnow = f[0];
+ eindex = findex = 0;
+ if ((fnow > enow) == (fnow > -enow)) {
+ Q = enow;
+ enow = e[++eindex];
+ } else {
+ Q = fnow;
+ fnow = f[++findex];
+ }
+ hindex = 0;
+ if ((eindex < elen) && (findex < flen)) {
+ if ((fnow > enow) == (fnow > -enow)) {
+ Fast_Two_Sum(enow, Q, Qnew, h[0]);
+ enow = e[++eindex];
+ } else {
+ Fast_Two_Sum(fnow, Q, Qnew, h[0]);
+ fnow = f[++findex];
+ }
+ Q = Qnew;
+ hindex = 1;
+ while ((eindex < elen) && (findex < flen)) {
+ if ((fnow > enow) == (fnow > -enow)) {
+ Two_Sum(Q, enow, Qnew, h[hindex]);
+ enow = e[++eindex];
+ } else {
+ Two_Sum(Q, fnow, Qnew, h[hindex]);
+ fnow = f[++findex];
+ }
+ Q = Qnew;
+ hindex++;
+ }
+ }
+ while (eindex < elen) {
+ Two_Sum(Q, enow, Qnew, h[hindex]);
+ enow = e[++eindex];
+ Q = Qnew;
+ hindex++;
+ }
+ while (findex < flen) {
+ Two_Sum(Q, fnow, Qnew, h[hindex]);
+ fnow = f[++findex];
+ Q = Qnew;
+ hindex++;
+ }
+ h[hindex] = Q;
+ return hindex + 1;
+}
+
+/*****************************************************************************/
+/* */
+/* fast_expansion_sum_zeroelim() Sum two expansions, eliminating zero */
+/* components from the output expansion. */
+/* */
+/* Sets h = e + f. See the long version of my paper for details. */
+/* */
+/* If round-to-even is used (as with IEEE 754), maintains the strongly */
+/* nonoverlapping property. (That is, if e is strongly nonoverlapping, h */
+/* will be also.) Does NOT maintain the nonoverlapping or nonadjacent */
+/* properties. */
+/* */
+/*****************************************************************************/
+
+int fast_expansion_sum_zeroelim(int elen, REAL *e, int flen, REAL *f, REAL *h)
+/* h cannot be e or f. */
+{
+ REAL Q;
+ INEXACT REAL Qnew;
+ INEXACT REAL hh;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ int eindex, findex, hindex;
+ REAL enow, fnow;
+
+ enow = e[0];
+ fnow = f[0];
+ eindex = findex = 0;
+ if ((fnow > enow) == (fnow > -enow)) {
+ Q = enow;
+ enow = e[++eindex];
+ } else {
+ Q = fnow;
+ fnow = f[++findex];
+ }
+ hindex = 0;
+ if ((eindex < elen) && (findex < flen)) {
+ if ((fnow > enow) == (fnow > -enow)) {
+ Fast_Two_Sum(enow, Q, Qnew, hh);
+ enow = e[++eindex];
+ } else {
+ Fast_Two_Sum(fnow, Q, Qnew, hh);
+ fnow = f[++findex];
+ }
+ Q = Qnew;
+ if (hh != 0.0) {
+ h[hindex++] = hh;
+ }
+ while ((eindex < elen) && (findex < flen)) {
+ if ((fnow > enow) == (fnow > -enow)) {
+ Two_Sum(Q, enow, Qnew, hh);
+ enow = e[++eindex];
+ } else {
+ Two_Sum(Q, fnow, Qnew, hh);
+ fnow = f[++findex];
+ }
+ Q = Qnew;
+ if (hh != 0.0) {
+ h[hindex++] = hh;
+ }
+ }
+ }
+ while (eindex < elen) {
+ Two_Sum(Q, enow, Qnew, hh);
+ enow = e[++eindex];
+ Q = Qnew;
+ if (hh != 0.0) {
+ h[hindex++] = hh;
+ }
+ }
+ while (findex < flen) {
+ Two_Sum(Q, fnow, Qnew, hh);
+ fnow = f[++findex];
+ Q = Qnew;
+ if (hh != 0.0) {
+ h[hindex++] = hh;
+ }
+ }
+ if ((Q != 0.0) || (hindex == 0)) {
+ h[hindex++] = Q;
+ }
+ return hindex;
+}
+
+/*****************************************************************************/
+/* */
+/* linear_expansion_sum() Sum two expansions. */
+/* */
+/* Sets h = e + f. See either version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. (That is, if e is */
+/* nonoverlapping, h will be also.) */
+/* */
+/*****************************************************************************/
+
+int linear_expansion_sum(int elen, REAL *e, int flen, REAL *f, REAL *h)
+/* h cannot be e or f. */
+{
+ REAL Q, q;
+ INEXACT REAL Qnew;
+ INEXACT REAL R;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ int eindex, findex, hindex;
+ REAL enow, fnow;
+ REAL g0;
+
+ enow = e[0];
+ fnow = f[0];
+ eindex = findex = 0;
+ if ((fnow > enow) == (fnow > -enow)) {
+ g0 = enow;
+ enow = e[++eindex];
+ } else {
+ g0 = fnow;
+ fnow = f[++findex];
+ }
+ if ((eindex < elen) && ((findex >= flen)
+ || ((fnow > enow) == (fnow > -enow)))) {
+ Fast_Two_Sum(enow, g0, Qnew, q);
+ enow = e[++eindex];
+ } else {
+ Fast_Two_Sum(fnow, g0, Qnew, q);
+ fnow = f[++findex];
+ }
+ Q = Qnew;
+ for (hindex = 0; hindex < elen + flen - 2; hindex++) {
+ if ((eindex < elen) && ((findex >= flen)
+ || ((fnow > enow) == (fnow > -enow)))) {
+ Fast_Two_Sum(enow, q, R, h[hindex]);
+ enow = e[++eindex];
+ } else {
+ Fast_Two_Sum(fnow, q, R, h[hindex]);
+ fnow = f[++findex];
+ }
+ Two_Sum(Q, R, Qnew, q);
+ Q = Qnew;
+ }
+ h[hindex] = q;
+ h[hindex + 1] = Q;
+ return hindex + 2;
+}
+
+/*****************************************************************************/
+/* */
+/* linear_expansion_sum_zeroelim() Sum two expansions, eliminating zero */
+/* components from the output expansion. */
+/* */
+/* Sets h = e + f. See either version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. (That is, if e is */
+/* nonoverlapping, h will be also.) */
+/* */
+/*****************************************************************************/
+
+int linear_expansion_sum_zeroelim(int elen, REAL *e, int flen, REAL *f,
+ REAL *h)
+/* h cannot be e or f. */
+{
+ REAL Q, q, hh;
+ INEXACT REAL Qnew;
+ INEXACT REAL R;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ int eindex, findex, hindex;
+ int count;
+ REAL enow, fnow;
+ REAL g0;
+
+ enow = e[0];
+ fnow = f[0];
+ eindex = findex = 0;
+ hindex = 0;
+ if ((fnow > enow) == (fnow > -enow)) {
+ g0 = enow;
+ enow = e[++eindex];
+ } else {
+ g0 = fnow;
+ fnow = f[++findex];
+ }
+ if ((eindex < elen) && ((findex >= flen)
+ || ((fnow > enow) == (fnow > -enow)))) {
+ Fast_Two_Sum(enow, g0, Qnew, q);
+ enow = e[++eindex];
+ } else {
+ Fast_Two_Sum(fnow, g0, Qnew, q);
+ fnow = f[++findex];
+ }
+ Q = Qnew;
+ for (count = 2; count < elen + flen; count++) {
+ if ((eindex < elen) && ((findex >= flen)
+ || ((fnow > enow) == (fnow > -enow)))) {
+ Fast_Two_Sum(enow, q, R, hh);
+ enow = e[++eindex];
+ } else {
+ Fast_Two_Sum(fnow, q, R, hh);
+ fnow = f[++findex];
+ }
+ Two_Sum(Q, R, Qnew, q);
+ Q = Qnew;
+ if (hh != 0) {
+ h[hindex++] = hh;
+ }
+ }
+ if (q != 0) {
+ h[hindex++] = q;
+ }
+ if ((Q != 0.0) || (hindex == 0)) {
+ h[hindex++] = Q;
+ }
+ return hindex;
+}
+
+/*****************************************************************************/
+/* */
+/* scale_expansion() Multiply an expansion by a scalar. */
+/* */
+/* Sets h = be. See either version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
+/* properties as well. (That is, if e has one of these properties, so */
+/* will h.) */
+/* */
+/*****************************************************************************/
+
+int scale_expansion(int elen, REAL *e, REAL b, REAL *h)
+/* e and h cannot be the same. */
+{
+ INEXACT REAL Q;
+ INEXACT REAL sum;
+ INEXACT REAL product1;
+ REAL product0;
+ int eindex, hindex;
+ REAL enow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+
+ Split(b, bhi, blo);
+ Two_Product_Presplit(e[0], b, bhi, blo, Q, h[0]);
+ hindex = 1;
+ for (eindex = 1; eindex < elen; eindex++) {
+ enow = e[eindex];
+ Two_Product_Presplit(enow, b, bhi, blo, product1, product0);
+ Two_Sum(Q, product0, sum, h[hindex]);
+ hindex++;
+ Two_Sum(product1, sum, Q, h[hindex]);
+ hindex++;
+ }
+ h[hindex] = Q;
+ return elen + elen;
+}
+
+/*****************************************************************************/
+/* */
+/* scale_expansion_zeroelim() Multiply an expansion by a scalar, */
+/* eliminating zero components from the */
+/* output expansion. */
+/* */
+/* Sets h = be. See either version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), maintains the strongly nonoverlapping and nonadjacent */
+/* properties as well. (That is, if e has one of these properties, so */
+/* will h.) */
+/* */
+/*****************************************************************************/
+
+int scale_expansion_zeroelim(int elen, REAL *e, REAL b, REAL *h)
+/* e and h cannot be the same. */
+{
+ INEXACT REAL Q, sum;
+ REAL hh;
+ INEXACT REAL product1;
+ REAL product0;
+ int eindex, hindex;
+ REAL enow;
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+
+ Split(b, bhi, blo);
+ Two_Product_Presplit(e[0], b, bhi, blo, Q, hh);
+ hindex = 0;
+ if (hh != 0) {
+ h[hindex++] = hh;
+ }
+ for (eindex = 1; eindex < elen; eindex++) {
+ enow = e[eindex];
+ Two_Product_Presplit(enow, b, bhi, blo, product1, product0);
+ Two_Sum(Q, product0, sum, hh);
+ if (hh != 0) {
+ h[hindex++] = hh;
+ }
+ Fast_Two_Sum(product1, sum, Q, hh);
+ if (hh != 0) {
+ h[hindex++] = hh;
+ }
+ }
+ if ((Q != 0.0) || (hindex == 0)) {
+ h[hindex++] = Q;
+ }
+ return hindex;
+}
+
+/*****************************************************************************/
+/* */
+/* compress() Compress an expansion. */
+/* */
+/* See the long version of my paper for details. */
+/* */
+/* Maintains the nonoverlapping property. If round-to-even is used (as */
+/* with IEEE 754), then any nonoverlapping expansion is converted to a */
+/* nonadjacent expansion. */
+/* */
+/*****************************************************************************/
+
+int compress(int elen, REAL *e, REAL *h)
+/* e and h may be the same. */
+{
+ REAL Q, q;
+ INEXACT REAL Qnew;
+ int eindex, hindex;
+ INEXACT REAL bvirt;
+ REAL enow, hnow;
+ int top, bottom;
+
+ bottom = elen - 1;
+ Q = e[bottom];
+ for (eindex = elen - 2; eindex >= 0; eindex--) {
+ enow = e[eindex];
+ Fast_Two_Sum(Q, enow, Qnew, q);
+ if (q != 0) {
+ h[bottom--] = Qnew;
+ Q = q;
+ } else {
+ Q = Qnew;
+ }
+ }
+ top = 0;
+ for (hindex = bottom + 1; hindex < elen; hindex++) {
+ hnow = h[hindex];
+ Fast_Two_Sum(hnow, Q, Qnew, q);
+ if (q != 0) {
+ h[top++] = q;
+ }
+ Q = Qnew;
+ }
+ h[top] = Q;
+ return top + 1;
+}
+
+/*****************************************************************************/
+/* */
+/* estimate() Produce a one-word estimate of an expansion's value. */
+/* */
+/* See either version of my paper for details. */
+/* */
+/*****************************************************************************/
+
+REAL estimate(int elen, REAL *e)
+{
+ REAL Q;
+ int eindex;
+
+ Q = e[0];
+ for (eindex = 1; eindex < elen; eindex++) {
+ Q += e[eindex];
+ }
+ return Q;
+}
+
+/*****************************************************************************/
+/* */
+/* orient2dfast() Approximate 2D orientation test. Nonrobust. */
+/* orient2dexact() Exact 2D orientation test. Robust. */
+/* orient2dslow() Another exact 2D orientation test. Robust. */
+/* orient2d() Adaptive exact 2D orientation test. Robust. */
+/* */
+/* Return a positive value if the points pa, pb, and pc occur */
+/* in counterclockwise order; a negative value if they occur */
+/* in clockwise order; and zero if they are collinear. The */
+/* result is also a rough approximation of twice the signed */
+/* area of the triangle defined by the three points. */
+/* */
+/* Only the first and last routine should be used; the middle two are for */
+/* timings. */
+/* */
+/* The last three use exact arithmetic to ensure a correct answer. The */
+/* result returned is the determinant of a matrix. In orient2d() only, */
+/* this determinant is computed adaptively, in the sense that exact */
+/* arithmetic is used only to the degree it is needed to ensure that the */
+/* returned value has the correct sign. Hence, orient2d() is usually quite */
+/* fast, but will run more slowly when the input points are collinear or */
+/* nearly so. */
+/* */
+/*****************************************************************************/
+
+REAL orient2dfast(REAL *pa, REAL *pb, REAL *pc)
+{
+ REAL acx, bcx, acy, bcy;
+
+ acx = pa[0] - pc[0];
+ bcx = pb[0] - pc[0];
+ acy = pa[1] - pc[1];
+ bcy = pb[1] - pc[1];
+ return acx * bcy - acy * bcx;
+}
+
+REAL orient2dexact(REAL *pa, REAL *pb, REAL *pc)
+{
+ INEXACT REAL axby1, axcy1, bxcy1, bxay1, cxay1, cxby1;
+ REAL axby0, axcy0, bxcy0, bxay0, cxay0, cxby0;
+ REAL aterms[4], bterms[4], cterms[4];
+ INEXACT REAL aterms3, bterms3, cterms3;
+ REAL v[8], w[12];
+ int vlength, wlength;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ Two_Product(pa[0], pb[1], axby1, axby0);
+ Two_Product(pa[0], pc[1], axcy1, axcy0);
+ Two_Two_Diff(axby1, axby0, axcy1, axcy0,
+ aterms3, aterms[2], aterms[1], aterms[0]);
+ aterms[3] = aterms3;
+
+ Two_Product(pb[0], pc[1], bxcy1, bxcy0);
+ Two_Product(pb[0], pa[1], bxay1, bxay0);
+ Two_Two_Diff(bxcy1, bxcy0, bxay1, bxay0,
+ bterms3, bterms[2], bterms[1], bterms[0]);
+ bterms[3] = bterms3;
+
+ Two_Product(pc[0], pa[1], cxay1, cxay0);
+ Two_Product(pc[0], pb[1], cxby1, cxby0);
+ Two_Two_Diff(cxay1, cxay0, cxby1, cxby0,
+ cterms3, cterms[2], cterms[1], cterms[0]);
+ cterms[3] = cterms3;
+
+ vlength = fast_expansion_sum_zeroelim(4, aterms, 4, bterms, v);
+ wlength = fast_expansion_sum_zeroelim(vlength, v, 4, cterms, w);
+
+ return w[wlength - 1];
+}
+
+REAL orient2dslow(REAL *pa, REAL *pb, REAL *pc)
+{
+ INEXACT REAL acx, acy, bcx, bcy;
+ REAL acxtail, acytail;
+ REAL bcxtail, bcytail;
+ REAL negate, negatetail;
+ REAL axby[8], bxay[8];
+ INEXACT REAL axby7, bxay7;
+ REAL deter[16];
+ int deterlen;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j, _k, _l, _m, _n;
+ REAL _0, _1, _2;
+
+ Two_Diff(pa[0], pc[0], acx, acxtail);
+ Two_Diff(pa[1], pc[1], acy, acytail);
+ Two_Diff(pb[0], pc[0], bcx, bcxtail);
+ Two_Diff(pb[1], pc[1], bcy, bcytail);
+
+ Two_Two_Product(acx, acxtail, bcy, bcytail,
+ axby7, axby[6], axby[5], axby[4],
+ axby[3], axby[2], axby[1], axby[0]);
+ axby[7] = axby7;
+ negate = -acy;
+ negatetail = -acytail;
+ Two_Two_Product(bcx, bcxtail, negate, negatetail,
+ bxay7, bxay[6], bxay[5], bxay[4],
+ bxay[3], bxay[2], bxay[1], bxay[0]);
+ bxay[7] = bxay7;
+
+ deterlen = fast_expansion_sum_zeroelim(8, axby, 8, bxay, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL orient2dadapt(REAL *pa, REAL *pb, REAL *pc, REAL detsum)
+{
+ INEXACT REAL acx, acy, bcx, bcy;
+ REAL acxtail, acytail, bcxtail, bcytail;
+ INEXACT REAL detleft, detright;
+ REAL detlefttail, detrighttail;
+ REAL det, errbound;
+ REAL B[4], C1[8], C2[12], D[16];
+ INEXACT REAL B3;
+ int C1length, C2length, Dlength;
+ REAL u[4];
+ INEXACT REAL u3;
+ INEXACT REAL s1, t1;
+ REAL s0, t0;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ acx = (REAL) (pa[0] - pc[0]);
+ bcx = (REAL) (pb[0] - pc[0]);
+ acy = (REAL) (pa[1] - pc[1]);
+ bcy = (REAL) (pb[1] - pc[1]);
+
+ Two_Product(acx, bcy, detleft, detlefttail);
+ Two_Product(acy, bcx, detright, detrighttail);
+
+ Two_Two_Diff(detleft, detlefttail, detright, detrighttail,
+ B3, B[2], B[1], B[0]);
+ B[3] = B3;
+
+ det = estimate(4, B);
+ errbound = ccwerrboundB * detsum;
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ Two_Diff_Tail(pa[0], pc[0], acx, acxtail);
+ Two_Diff_Tail(pb[0], pc[0], bcx, bcxtail);
+ Two_Diff_Tail(pa[1], pc[1], acy, acytail);
+ Two_Diff_Tail(pb[1], pc[1], bcy, bcytail);
+
+ if ((acxtail == 0.0) && (acytail == 0.0)
+ && (bcxtail == 0.0) && (bcytail == 0.0)) {
+ return det;
+ }
+
+ errbound = ccwerrboundC * detsum + resulterrbound * Absolute(det);
+ det += (acx * bcytail + bcy * acxtail)
+ - (acy * bcxtail + bcx * acytail);
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ Two_Product(acxtail, bcy, s1, s0);
+ Two_Product(acytail, bcx, t1, t0);
+ Two_Two_Diff(s1, s0, t1, t0, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ C1length = fast_expansion_sum_zeroelim(4, B, 4, u, C1);
+
+ Two_Product(acx, bcytail, s1, s0);
+ Two_Product(acy, bcxtail, t1, t0);
+ Two_Two_Diff(s1, s0, t1, t0, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ C2length = fast_expansion_sum_zeroelim(C1length, C1, 4, u, C2);
+
+ Two_Product(acxtail, bcytail, s1, s0);
+ Two_Product(acytail, bcxtail, t1, t0);
+ Two_Two_Diff(s1, s0, t1, t0, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ Dlength = fast_expansion_sum_zeroelim(C2length, C2, 4, u, D);
+
+ return(D[Dlength - 1]);
+}
+
+REAL orient2d(REAL *pa, REAL *pb, REAL *pc)
+{
+ REAL detleft, detright, det;
+ REAL detsum, errbound;
+
+ detleft = (pa[0] - pc[0]) * (pb[1] - pc[1]);
+ detright = (pa[1] - pc[1]) * (pb[0] - pc[0]);
+ det = detleft - detright;
+
+ if (detleft > 0.0) {
+ if (detright <= 0.0) {
+ return det;
+ } else {
+ detsum = detleft + detright;
+ }
+ } else if (detleft < 0.0) {
+ if (detright >= 0.0) {
+ return det;
+ } else {
+ detsum = -detleft - detright;
+ }
+ } else {
+ return det;
+ }
+
+ errbound = ccwerrboundA * detsum;
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ return orient2dadapt(pa, pb, pc, detsum);
+}
+
+/*****************************************************************************/
+/* */
+/* orient3dfast() Approximate 3D orientation test. Nonrobust. */
+/* orient3dexact() Exact 3D orientation test. Robust. */
+/* orient3dslow() Another exact 3D orientation test. Robust. */
+/* orient3d() Adaptive exact 3D orientation test. Robust. */
+/* */
+/* Return a positive value if the point pd lies below the */
+/* plane passing through pa, pb, and pc; "below" is defined so */
+/* that pa, pb, and pc appear in counterclockwise order when */
+/* viewed from above the plane. Returns a negative value if */
+/* pd lies above the plane. Returns zero if the points are */
+/* coplanar. The result is also a rough approximation of six */
+/* times the signed volume of the tetrahedron defined by the */
+/* four points. */
+/* */
+/* Only the first and last routine should be used; the middle two are for */
+/* timings. */
+/* */
+/* The last three use exact arithmetic to ensure a correct answer. The */
+/* result returned is the determinant of a matrix. In orient3d() only, */
+/* this determinant is computed adaptively, in the sense that exact */
+/* arithmetic is used only to the degree it is needed to ensure that the */
+/* returned value has the correct sign. Hence, orient3d() is usually quite */
+/* fast, but will run more slowly when the input points are coplanar or */
+/* nearly so. */
+/* */
+/*****************************************************************************/
+
+REAL orient3dfast(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ REAL adx, bdx, cdx;
+ REAL ady, bdy, cdy;
+ REAL adz, bdz, cdz;
+
+ adx = pa[0] - pd[0];
+ bdx = pb[0] - pd[0];
+ cdx = pc[0] - pd[0];
+ ady = pa[1] - pd[1];
+ bdy = pb[1] - pd[1];
+ cdy = pc[1] - pd[1];
+ adz = pa[2] - pd[2];
+ bdz = pb[2] - pd[2];
+ cdz = pc[2] - pd[2];
+
+ return adx * (bdy * cdz - bdz * cdy)
+ + bdx * (cdy * adz - cdz * ady)
+ + cdx * (ady * bdz - adz * bdy);
+}
+
+REAL orient3dexact(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ INEXACT REAL axby1, bxcy1, cxdy1, dxay1, axcy1, bxdy1;
+ INEXACT REAL bxay1, cxby1, dxcy1, axdy1, cxay1, dxby1;
+ REAL axby0, bxcy0, cxdy0, dxay0, axcy0, bxdy0;
+ REAL bxay0, cxby0, dxcy0, axdy0, cxay0, dxby0;
+ REAL ab[4], bc[4], cd[4], da[4], ac[4], bd[4];
+ REAL temp8[8];
+ int templen;
+ REAL abc[12], bcd[12], cda[12], dab[12];
+ int abclen, bcdlen, cdalen, dablen;
+ REAL adet[24], bdet[24], cdet[24], ddet[24];
+ int alen, blen, clen, dlen;
+ REAL abdet[48], cddet[48];
+ int ablen, cdlen;
+ REAL deter[96];
+ int deterlen;
+ int i;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ Two_Product(pa[0], pb[1], axby1, axby0);
+ Two_Product(pb[0], pa[1], bxay1, bxay0);
+ Two_Two_Diff(axby1, axby0, bxay1, bxay0, ab[3], ab[2], ab[1], ab[0]);
+
+ Two_Product(pb[0], pc[1], bxcy1, bxcy0);
+ Two_Product(pc[0], pb[1], cxby1, cxby0);
+ Two_Two_Diff(bxcy1, bxcy0, cxby1, cxby0, bc[3], bc[2], bc[1], bc[0]);
+
+ Two_Product(pc[0], pd[1], cxdy1, cxdy0);
+ Two_Product(pd[0], pc[1], dxcy1, dxcy0);
+ Two_Two_Diff(cxdy1, cxdy0, dxcy1, dxcy0, cd[3], cd[2], cd[1], cd[0]);
+
+ Two_Product(pd[0], pa[1], dxay1, dxay0);
+ Two_Product(pa[0], pd[1], axdy1, axdy0);
+ Two_Two_Diff(dxay1, dxay0, axdy1, axdy0, da[3], da[2], da[1], da[0]);
+
+ Two_Product(pa[0], pc[1], axcy1, axcy0);
+ Two_Product(pc[0], pa[1], cxay1, cxay0);
+ Two_Two_Diff(axcy1, axcy0, cxay1, cxay0, ac[3], ac[2], ac[1], ac[0]);
+
+ Two_Product(pb[0], pd[1], bxdy1, bxdy0);
+ Two_Product(pd[0], pb[1], dxby1, dxby0);
+ Two_Two_Diff(bxdy1, bxdy0, dxby1, dxby0, bd[3], bd[2], bd[1], bd[0]);
+
+ templen = fast_expansion_sum_zeroelim(4, cd, 4, da, temp8);
+ cdalen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, cda);
+ templen = fast_expansion_sum_zeroelim(4, da, 4, ab, temp8);
+ dablen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, dab);
+ for (i = 0; i < 4; i++) {
+ bd[i] = -bd[i];
+ ac[i] = -ac[i];
+ }
+ templen = fast_expansion_sum_zeroelim(4, ab, 4, bc, temp8);
+ abclen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, abc);
+ templen = fast_expansion_sum_zeroelim(4, bc, 4, cd, temp8);
+ bcdlen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, bcd);
+
+ alen = scale_expansion_zeroelim(bcdlen, bcd, pa[2], adet);
+ blen = scale_expansion_zeroelim(cdalen, cda, -pb[2], bdet);
+ clen = scale_expansion_zeroelim(dablen, dab, pc[2], cdet);
+ dlen = scale_expansion_zeroelim(abclen, abc, -pd[2], ddet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
+ deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL orient3dslow(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ INEXACT REAL adx, ady, adz, bdx, bdy, bdz, cdx, cdy, cdz;
+ REAL adxtail, adytail, adztail;
+ REAL bdxtail, bdytail, bdztail;
+ REAL cdxtail, cdytail, cdztail;
+ REAL negate, negatetail;
+ INEXACT REAL axby7, bxcy7, axcy7, bxay7, cxby7, cxay7;
+ REAL axby[8], bxcy[8], axcy[8], bxay[8], cxby[8], cxay[8];
+ REAL temp16[16], temp32[32], temp32t[32];
+ int temp16len, temp32len, temp32tlen;
+ REAL adet[64], bdet[64], cdet[64];
+ int alen, blen, clen;
+ REAL abdet[128];
+ int ablen;
+ REAL deter[192];
+ int deterlen;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j, _k, _l, _m, _n;
+ REAL _0, _1, _2;
+
+ Two_Diff(pa[0], pd[0], adx, adxtail);
+ Two_Diff(pa[1], pd[1], ady, adytail);
+ Two_Diff(pa[2], pd[2], adz, adztail);
+ Two_Diff(pb[0], pd[0], bdx, bdxtail);
+ Two_Diff(pb[1], pd[1], bdy, bdytail);
+ Two_Diff(pb[2], pd[2], bdz, bdztail);
+ Two_Diff(pc[0], pd[0], cdx, cdxtail);
+ Two_Diff(pc[1], pd[1], cdy, cdytail);
+ Two_Diff(pc[2], pd[2], cdz, cdztail);
+
+ Two_Two_Product(adx, adxtail, bdy, bdytail,
+ axby7, axby[6], axby[5], axby[4],
+ axby[3], axby[2], axby[1], axby[0]);
+ axby[7] = axby7;
+ negate = -ady;
+ negatetail = -adytail;
+ Two_Two_Product(bdx, bdxtail, negate, negatetail,
+ bxay7, bxay[6], bxay[5], bxay[4],
+ bxay[3], bxay[2], bxay[1], bxay[0]);
+ bxay[7] = bxay7;
+ Two_Two_Product(bdx, bdxtail, cdy, cdytail,
+ bxcy7, bxcy[6], bxcy[5], bxcy[4],
+ bxcy[3], bxcy[2], bxcy[1], bxcy[0]);
+ bxcy[7] = bxcy7;
+ negate = -bdy;
+ negatetail = -bdytail;
+ Two_Two_Product(cdx, cdxtail, negate, negatetail,
+ cxby7, cxby[6], cxby[5], cxby[4],
+ cxby[3], cxby[2], cxby[1], cxby[0]);
+ cxby[7] = cxby7;
+ Two_Two_Product(cdx, cdxtail, ady, adytail,
+ cxay7, cxay[6], cxay[5], cxay[4],
+ cxay[3], cxay[2], cxay[1], cxay[0]);
+ cxay[7] = cxay7;
+ negate = -cdy;
+ negatetail = -cdytail;
+ Two_Two_Product(adx, adxtail, negate, negatetail,
+ axcy7, axcy[6], axcy[5], axcy[4],
+ axcy[3], axcy[2], axcy[1], axcy[0]);
+ axcy[7] = axcy7;
+
+ temp16len = fast_expansion_sum_zeroelim(8, bxcy, 8, cxby, temp16);
+ temp32len = scale_expansion_zeroelim(temp16len, temp16, adz, temp32);
+ temp32tlen = scale_expansion_zeroelim(temp16len, temp16, adztail, temp32t);
+ alen = fast_expansion_sum_zeroelim(temp32len, temp32, temp32tlen, temp32t,
+ adet);
+
+ temp16len = fast_expansion_sum_zeroelim(8, cxay, 8, axcy, temp16);
+ temp32len = scale_expansion_zeroelim(temp16len, temp16, bdz, temp32);
+ temp32tlen = scale_expansion_zeroelim(temp16len, temp16, bdztail, temp32t);
+ blen = fast_expansion_sum_zeroelim(temp32len, temp32, temp32tlen, temp32t,
+ bdet);
+
+ temp16len = fast_expansion_sum_zeroelim(8, axby, 8, bxay, temp16);
+ temp32len = scale_expansion_zeroelim(temp16len, temp16, cdz, temp32);
+ temp32tlen = scale_expansion_zeroelim(temp16len, temp16, cdztail, temp32t);
+ clen = fast_expansion_sum_zeroelim(temp32len, temp32, temp32tlen, temp32t,
+ cdet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ deterlen = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL orient3dadapt(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL permanent)
+{
+ INEXACT REAL adx, bdx, cdx, ady, bdy, cdy, adz, bdz, cdz;
+ REAL det, errbound;
+
+ INEXACT REAL bdxcdy1, cdxbdy1, cdxady1, adxcdy1, adxbdy1, bdxady1;
+ REAL bdxcdy0, cdxbdy0, cdxady0, adxcdy0, adxbdy0, bdxady0;
+ REAL bc[4], ca[4], ab[4];
+ INEXACT REAL bc3, ca3, ab3;
+ REAL adet[8], bdet[8], cdet[8];
+ int alen, blen, clen;
+ REAL abdet[16];
+ int ablen;
+ REAL *finnow, *finother, *finswap;
+ REAL fin1[192], fin2[192];
+ int finlength;
+
+ REAL adxtail, bdxtail, cdxtail;
+ REAL adytail, bdytail, cdytail;
+ REAL adztail, bdztail, cdztail;
+ INEXACT REAL at_blarge, at_clarge;
+ INEXACT REAL bt_clarge, bt_alarge;
+ INEXACT REAL ct_alarge, ct_blarge;
+ REAL at_b[4], at_c[4], bt_c[4], bt_a[4], ct_a[4], ct_b[4];
+ int at_blen, at_clen, bt_clen, bt_alen, ct_alen, ct_blen;
+ INEXACT REAL bdxt_cdy1, cdxt_bdy1, cdxt_ady1;
+ INEXACT REAL adxt_cdy1, adxt_bdy1, bdxt_ady1;
+ REAL bdxt_cdy0, cdxt_bdy0, cdxt_ady0;
+ REAL adxt_cdy0, adxt_bdy0, bdxt_ady0;
+ INEXACT REAL bdyt_cdx1, cdyt_bdx1, cdyt_adx1;
+ INEXACT REAL adyt_cdx1, adyt_bdx1, bdyt_adx1;
+ REAL bdyt_cdx0, cdyt_bdx0, cdyt_adx0;
+ REAL adyt_cdx0, adyt_bdx0, bdyt_adx0;
+ REAL bct[8], cat[8], abt[8];
+ int bctlen, catlen, abtlen;
+ INEXACT REAL bdxt_cdyt1, cdxt_bdyt1, cdxt_adyt1;
+ INEXACT REAL adxt_cdyt1, adxt_bdyt1, bdxt_adyt1;
+ REAL bdxt_cdyt0, cdxt_bdyt0, cdxt_adyt0;
+ REAL adxt_cdyt0, adxt_bdyt0, bdxt_adyt0;
+ REAL u[4], v[12], w[16];
+ INEXACT REAL u3;
+ int vlength, wlength;
+ REAL negate;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j, _k;
+ REAL _0;
+
+ adx = (REAL) (pa[0] - pd[0]);
+ bdx = (REAL) (pb[0] - pd[0]);
+ cdx = (REAL) (pc[0] - pd[0]);
+ ady = (REAL) (pa[1] - pd[1]);
+ bdy = (REAL) (pb[1] - pd[1]);
+ cdy = (REAL) (pc[1] - pd[1]);
+ adz = (REAL) (pa[2] - pd[2]);
+ bdz = (REAL) (pb[2] - pd[2]);
+ cdz = (REAL) (pc[2] - pd[2]);
+
+ Two_Product(bdx, cdy, bdxcdy1, bdxcdy0);
+ Two_Product(cdx, bdy, cdxbdy1, cdxbdy0);
+ Two_Two_Diff(bdxcdy1, bdxcdy0, cdxbdy1, cdxbdy0, bc3, bc[2], bc[1], bc[0]);
+ bc[3] = bc3;
+ alen = scale_expansion_zeroelim(4, bc, adz, adet);
+
+ Two_Product(cdx, ady, cdxady1, cdxady0);
+ Two_Product(adx, cdy, adxcdy1, adxcdy0);
+ Two_Two_Diff(cdxady1, cdxady0, adxcdy1, adxcdy0, ca3, ca[2], ca[1], ca[0]);
+ ca[3] = ca3;
+ blen = scale_expansion_zeroelim(4, ca, bdz, bdet);
+
+ Two_Product(adx, bdy, adxbdy1, adxbdy0);
+ Two_Product(bdx, ady, bdxady1, bdxady0);
+ Two_Two_Diff(adxbdy1, adxbdy0, bdxady1, bdxady0, ab3, ab[2], ab[1], ab[0]);
+ ab[3] = ab3;
+ clen = scale_expansion_zeroelim(4, ab, cdz, cdet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ finlength = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, fin1);
+
+ det = estimate(finlength, fin1);
+ errbound = o3derrboundB * permanent;
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ Two_Diff_Tail(pa[0], pd[0], adx, adxtail);
+ Two_Diff_Tail(pb[0], pd[0], bdx, bdxtail);
+ Two_Diff_Tail(pc[0], pd[0], cdx, cdxtail);
+ Two_Diff_Tail(pa[1], pd[1], ady, adytail);
+ Two_Diff_Tail(pb[1], pd[1], bdy, bdytail);
+ Two_Diff_Tail(pc[1], pd[1], cdy, cdytail);
+ Two_Diff_Tail(pa[2], pd[2], adz, adztail);
+ Two_Diff_Tail(pb[2], pd[2], bdz, bdztail);
+ Two_Diff_Tail(pc[2], pd[2], cdz, cdztail);
+
+ if ((adxtail == 0.0) && (bdxtail == 0.0) && (cdxtail == 0.0)
+ && (adytail == 0.0) && (bdytail == 0.0) && (cdytail == 0.0)
+ && (adztail == 0.0) && (bdztail == 0.0) && (cdztail == 0.0)) {
+ return det;
+ }
+
+ errbound = o3derrboundC * permanent + resulterrbound * Absolute(det);
+ det += (adz * ((bdx * cdytail + cdy * bdxtail)
+ - (bdy * cdxtail + cdx * bdytail))
+ + adztail * (bdx * cdy - bdy * cdx))
+ + (bdz * ((cdx * adytail + ady * cdxtail)
+ - (cdy * adxtail + adx * cdytail))
+ + bdztail * (cdx * ady - cdy * adx))
+ + (cdz * ((adx * bdytail + bdy * adxtail)
+ - (ady * bdxtail + bdx * adytail))
+ + cdztail * (adx * bdy - ady * bdx));
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ finnow = fin1;
+ finother = fin2;
+
+ if (adxtail == 0.0) {
+ if (adytail == 0.0) {
+ at_b[0] = 0.0;
+ at_blen = 1;
+ at_c[0] = 0.0;
+ at_clen = 1;
+ } else {
+ negate = -adytail;
+ Two_Product(negate, bdx, at_blarge, at_b[0]);
+ at_b[1] = at_blarge;
+ at_blen = 2;
+ Two_Product(adytail, cdx, at_clarge, at_c[0]);
+ at_c[1] = at_clarge;
+ at_clen = 2;
+ }
+ } else {
+ if (adytail == 0.0) {
+ Two_Product(adxtail, bdy, at_blarge, at_b[0]);
+ at_b[1] = at_blarge;
+ at_blen = 2;
+ negate = -adxtail;
+ Two_Product(negate, cdy, at_clarge, at_c[0]);
+ at_c[1] = at_clarge;
+ at_clen = 2;
+ } else {
+ Two_Product(adxtail, bdy, adxt_bdy1, adxt_bdy0);
+ Two_Product(adytail, bdx, adyt_bdx1, adyt_bdx0);
+ Two_Two_Diff(adxt_bdy1, adxt_bdy0, adyt_bdx1, adyt_bdx0,
+ at_blarge, at_b[2], at_b[1], at_b[0]);
+ at_b[3] = at_blarge;
+ at_blen = 4;
+ Two_Product(adytail, cdx, adyt_cdx1, adyt_cdx0);
+ Two_Product(adxtail, cdy, adxt_cdy1, adxt_cdy0);
+ Two_Two_Diff(adyt_cdx1, adyt_cdx0, adxt_cdy1, adxt_cdy0,
+ at_clarge, at_c[2], at_c[1], at_c[0]);
+ at_c[3] = at_clarge;
+ at_clen = 4;
+ }
+ }
+ if (bdxtail == 0.0) {
+ if (bdytail == 0.0) {
+ bt_c[0] = 0.0;
+ bt_clen = 1;
+ bt_a[0] = 0.0;
+ bt_alen = 1;
+ } else {
+ negate = -bdytail;
+ Two_Product(negate, cdx, bt_clarge, bt_c[0]);
+ bt_c[1] = bt_clarge;
+ bt_clen = 2;
+ Two_Product(bdytail, adx, bt_alarge, bt_a[0]);
+ bt_a[1] = bt_alarge;
+ bt_alen = 2;
+ }
+ } else {
+ if (bdytail == 0.0) {
+ Two_Product(bdxtail, cdy, bt_clarge, bt_c[0]);
+ bt_c[1] = bt_clarge;
+ bt_clen = 2;
+ negate = -bdxtail;
+ Two_Product(negate, ady, bt_alarge, bt_a[0]);
+ bt_a[1] = bt_alarge;
+ bt_alen = 2;
+ } else {
+ Two_Product(bdxtail, cdy, bdxt_cdy1, bdxt_cdy0);
+ Two_Product(bdytail, cdx, bdyt_cdx1, bdyt_cdx0);
+ Two_Two_Diff(bdxt_cdy1, bdxt_cdy0, bdyt_cdx1, bdyt_cdx0,
+ bt_clarge, bt_c[2], bt_c[1], bt_c[0]);
+ bt_c[3] = bt_clarge;
+ bt_clen = 4;
+ Two_Product(bdytail, adx, bdyt_adx1, bdyt_adx0);
+ Two_Product(bdxtail, ady, bdxt_ady1, bdxt_ady0);
+ Two_Two_Diff(bdyt_adx1, bdyt_adx0, bdxt_ady1, bdxt_ady0,
+ bt_alarge, bt_a[2], bt_a[1], bt_a[0]);
+ bt_a[3] = bt_alarge;
+ bt_alen = 4;
+ }
+ }
+ if (cdxtail == 0.0) {
+ if (cdytail == 0.0) {
+ ct_a[0] = 0.0;
+ ct_alen = 1;
+ ct_b[0] = 0.0;
+ ct_blen = 1;
+ } else {
+ negate = -cdytail;
+ Two_Product(negate, adx, ct_alarge, ct_a[0]);
+ ct_a[1] = ct_alarge;
+ ct_alen = 2;
+ Two_Product(cdytail, bdx, ct_blarge, ct_b[0]);
+ ct_b[1] = ct_blarge;
+ ct_blen = 2;
+ }
+ } else {
+ if (cdytail == 0.0) {
+ Two_Product(cdxtail, ady, ct_alarge, ct_a[0]);
+ ct_a[1] = ct_alarge;
+ ct_alen = 2;
+ negate = -cdxtail;
+ Two_Product(negate, bdy, ct_blarge, ct_b[0]);
+ ct_b[1] = ct_blarge;
+ ct_blen = 2;
+ } else {
+ Two_Product(cdxtail, ady, cdxt_ady1, cdxt_ady0);
+ Two_Product(cdytail, adx, cdyt_adx1, cdyt_adx0);
+ Two_Two_Diff(cdxt_ady1, cdxt_ady0, cdyt_adx1, cdyt_adx0,
+ ct_alarge, ct_a[2], ct_a[1], ct_a[0]);
+ ct_a[3] = ct_alarge;
+ ct_alen = 4;
+ Two_Product(cdytail, bdx, cdyt_bdx1, cdyt_bdx0);
+ Two_Product(cdxtail, bdy, cdxt_bdy1, cdxt_bdy0);
+ Two_Two_Diff(cdyt_bdx1, cdyt_bdx0, cdxt_bdy1, cdxt_bdy0,
+ ct_blarge, ct_b[2], ct_b[1], ct_b[0]);
+ ct_b[3] = ct_blarge;
+ ct_blen = 4;
+ }
+ }
+
+ bctlen = fast_expansion_sum_zeroelim(bt_clen, bt_c, ct_blen, ct_b, bct);
+ wlength = scale_expansion_zeroelim(bctlen, bct, adz, w);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+
+ catlen = fast_expansion_sum_zeroelim(ct_alen, ct_a, at_clen, at_c, cat);
+ wlength = scale_expansion_zeroelim(catlen, cat, bdz, w);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+
+ abtlen = fast_expansion_sum_zeroelim(at_blen, at_b, bt_alen, bt_a, abt);
+ wlength = scale_expansion_zeroelim(abtlen, abt, cdz, w);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+
+ if (adztail != 0.0) {
+ vlength = scale_expansion_zeroelim(4, bc, adztail, v);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, vlength, v,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (bdztail != 0.0) {
+ vlength = scale_expansion_zeroelim(4, ca, bdztail, v);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, vlength, v,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (cdztail != 0.0) {
+ vlength = scale_expansion_zeroelim(4, ab, cdztail, v);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, vlength, v,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+
+ if (adxtail != 0.0) {
+ if (bdytail != 0.0) {
+ Two_Product(adxtail, bdytail, adxt_bdyt1, adxt_bdyt0);
+ Two_One_Product(adxt_bdyt1, adxt_bdyt0, cdz, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (cdztail != 0.0) {
+ Two_One_Product(adxt_bdyt1, adxt_bdyt0, cdztail, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ if (cdytail != 0.0) {
+ negate = -adxtail;
+ Two_Product(negate, cdytail, adxt_cdyt1, adxt_cdyt0);
+ Two_One_Product(adxt_cdyt1, adxt_cdyt0, bdz, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (bdztail != 0.0) {
+ Two_One_Product(adxt_cdyt1, adxt_cdyt0, bdztail, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ }
+ if (bdxtail != 0.0) {
+ if (cdytail != 0.0) {
+ Two_Product(bdxtail, cdytail, bdxt_cdyt1, bdxt_cdyt0);
+ Two_One_Product(bdxt_cdyt1, bdxt_cdyt0, adz, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (adztail != 0.0) {
+ Two_One_Product(bdxt_cdyt1, bdxt_cdyt0, adztail, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ if (adytail != 0.0) {
+ negate = -bdxtail;
+ Two_Product(negate, adytail, bdxt_adyt1, bdxt_adyt0);
+ Two_One_Product(bdxt_adyt1, bdxt_adyt0, cdz, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (cdztail != 0.0) {
+ Two_One_Product(bdxt_adyt1, bdxt_adyt0, cdztail, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ }
+ if (cdxtail != 0.0) {
+ if (adytail != 0.0) {
+ Two_Product(cdxtail, adytail, cdxt_adyt1, cdxt_adyt0);
+ Two_One_Product(cdxt_adyt1, cdxt_adyt0, bdz, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (bdztail != 0.0) {
+ Two_One_Product(cdxt_adyt1, cdxt_adyt0, bdztail, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ if (bdytail != 0.0) {
+ negate = -cdxtail;
+ Two_Product(negate, bdytail, cdxt_bdyt1, cdxt_bdyt0);
+ Two_One_Product(cdxt_bdyt1, cdxt_bdyt0, adz, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (adztail != 0.0) {
+ Two_One_Product(cdxt_bdyt1, cdxt_bdyt0, adztail, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, 4, u,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ }
+
+ if (adztail != 0.0) {
+ wlength = scale_expansion_zeroelim(bctlen, bct, adztail, w);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (bdztail != 0.0) {
+ wlength = scale_expansion_zeroelim(catlen, cat, bdztail, w);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (cdztail != 0.0) {
+ wlength = scale_expansion_zeroelim(abtlen, abt, cdztail, w);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, wlength, w,
+ finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+
+ return finnow[finlength - 1];
+}
+
+REAL orient3d(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ REAL adx, bdx, cdx, ady, bdy, cdy, adz, bdz, cdz;
+ REAL bdxcdy, cdxbdy, cdxady, adxcdy, adxbdy, bdxady;
+ REAL det;
+ REAL permanent, errbound;
+
+ adx = pa[0] - pd[0];
+ bdx = pb[0] - pd[0];
+ cdx = pc[0] - pd[0];
+ ady = pa[1] - pd[1];
+ bdy = pb[1] - pd[1];
+ cdy = pc[1] - pd[1];
+ adz = pa[2] - pd[2];
+ bdz = pb[2] - pd[2];
+ cdz = pc[2] - pd[2];
+
+ bdxcdy = bdx * cdy;
+ cdxbdy = cdx * bdy;
+
+ cdxady = cdx * ady;
+ adxcdy = adx * cdy;
+
+ adxbdy = adx * bdy;
+ bdxady = bdx * ady;
+
+ det = adz * (bdxcdy - cdxbdy)
+ + bdz * (cdxady - adxcdy)
+ + cdz * (adxbdy - bdxady);
+
+ permanent = (Absolute(bdxcdy) + Absolute(cdxbdy)) * Absolute(adz)
+ + (Absolute(cdxady) + Absolute(adxcdy)) * Absolute(bdz)
+ + (Absolute(adxbdy) + Absolute(bdxady)) * Absolute(cdz);
+ errbound = o3derrboundA * permanent;
+ if ((det > errbound) || (-det > errbound)) {
+ return det;
+ }
+
+ return orient3dadapt(pa, pb, pc, pd, permanent);
+}
+
+/*****************************************************************************/
+/* */
+/* incirclefast() Approximate 2D incircle test. Nonrobust. */
+/* incircleexact() Exact 2D incircle test. Robust. */
+/* incircleslow() Another exact 2D incircle test. Robust. */
+/* incircle() Adaptive exact 2D incircle test. Robust. */
+/* */
+/* Return a positive value if the point pd lies inside the */
+/* circle passing through pa, pb, and pc; a negative value if */
+/* it lies outside; and zero if the four points are cocircular.*/
+/* The points pa, pb, and pc must be in counterclockwise */
+/* order, or the sign of the result will be reversed. */
+/* */
+/* Only the first and last routine should be used; the middle two are for */
+/* timings. */
+/* */
+/* The last three use exact arithmetic to ensure a correct answer. The */
+/* result returned is the determinant of a matrix. In incircle() only, */
+/* this determinant is computed adaptively, in the sense that exact */
+/* arithmetic is used only to the degree it is needed to ensure that the */
+/* returned value has the correct sign. Hence, incircle() is usually quite */
+/* fast, but will run more slowly when the input points are cocircular or */
+/* nearly so. */
+/* */
+/*****************************************************************************/
+
+REAL incirclefast(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ REAL adx, ady, bdx, bdy, cdx, cdy;
+ REAL abdet, bcdet, cadet;
+ REAL alift, blift, clift;
+
+ adx = pa[0] - pd[0];
+ ady = pa[1] - pd[1];
+ bdx = pb[0] - pd[0];
+ bdy = pb[1] - pd[1];
+ cdx = pc[0] - pd[0];
+ cdy = pc[1] - pd[1];
+
+ abdet = adx * bdy - bdx * ady;
+ bcdet = bdx * cdy - cdx * bdy;
+ cadet = cdx * ady - adx * cdy;
+ alift = adx * adx + ady * ady;
+ blift = bdx * bdx + bdy * bdy;
+ clift = cdx * cdx + cdy * cdy;
+
+ return alift * bcdet + blift * cadet + clift * abdet;
+}
+
+REAL incircleexact(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ INEXACT REAL axby1, bxcy1, cxdy1, dxay1, axcy1, bxdy1;
+ INEXACT REAL bxay1, cxby1, dxcy1, axdy1, cxay1, dxby1;
+ REAL axby0, bxcy0, cxdy0, dxay0, axcy0, bxdy0;
+ REAL bxay0, cxby0, dxcy0, axdy0, cxay0, dxby0;
+ REAL ab[4], bc[4], cd[4], da[4], ac[4], bd[4];
+ REAL temp8[8];
+ int templen;
+ REAL abc[12], bcd[12], cda[12], dab[12];
+ int abclen, bcdlen, cdalen, dablen;
+ REAL det24x[24], det24y[24], det48x[48], det48y[48];
+ int xlen, ylen;
+ REAL adet[96], bdet[96], cdet[96], ddet[96];
+ int alen, blen, clen, dlen;
+ REAL abdet[192], cddet[192];
+ int ablen, cdlen;
+ REAL deter[384];
+ int deterlen;
+ int i;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ Two_Product(pa[0], pb[1], axby1, axby0);
+ Two_Product(pb[0], pa[1], bxay1, bxay0);
+ Two_Two_Diff(axby1, axby0, bxay1, bxay0, ab[3], ab[2], ab[1], ab[0]);
+
+ Two_Product(pb[0], pc[1], bxcy1, bxcy0);
+ Two_Product(pc[0], pb[1], cxby1, cxby0);
+ Two_Two_Diff(bxcy1, bxcy0, cxby1, cxby0, bc[3], bc[2], bc[1], bc[0]);
+
+ Two_Product(pc[0], pd[1], cxdy1, cxdy0);
+ Two_Product(pd[0], pc[1], dxcy1, dxcy0);
+ Two_Two_Diff(cxdy1, cxdy0, dxcy1, dxcy0, cd[3], cd[2], cd[1], cd[0]);
+
+ Two_Product(pd[0], pa[1], dxay1, dxay0);
+ Two_Product(pa[0], pd[1], axdy1, axdy0);
+ Two_Two_Diff(dxay1, dxay0, axdy1, axdy0, da[3], da[2], da[1], da[0]);
+
+ Two_Product(pa[0], pc[1], axcy1, axcy0);
+ Two_Product(pc[0], pa[1], cxay1, cxay0);
+ Two_Two_Diff(axcy1, axcy0, cxay1, cxay0, ac[3], ac[2], ac[1], ac[0]);
+
+ Two_Product(pb[0], pd[1], bxdy1, bxdy0);
+ Two_Product(pd[0], pb[1], dxby1, dxby0);
+ Two_Two_Diff(bxdy1, bxdy0, dxby1, dxby0, bd[3], bd[2], bd[1], bd[0]);
+
+ templen = fast_expansion_sum_zeroelim(4, cd, 4, da, temp8);
+ cdalen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, cda);
+ templen = fast_expansion_sum_zeroelim(4, da, 4, ab, temp8);
+ dablen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, dab);
+ for (i = 0; i < 4; i++) {
+ bd[i] = -bd[i];
+ ac[i] = -ac[i];
+ }
+ templen = fast_expansion_sum_zeroelim(4, ab, 4, bc, temp8);
+ abclen = fast_expansion_sum_zeroelim(templen, temp8, 4, ac, abc);
+ templen = fast_expansion_sum_zeroelim(4, bc, 4, cd, temp8);
+ bcdlen = fast_expansion_sum_zeroelim(templen, temp8, 4, bd, bcd);
+
+ xlen = scale_expansion_zeroelim(bcdlen, bcd, pa[0], det24x);
+ xlen = scale_expansion_zeroelim(xlen, det24x, pa[0], det48x);
+ ylen = scale_expansion_zeroelim(bcdlen, bcd, pa[1], det24y);
+ ylen = scale_expansion_zeroelim(ylen, det24y, pa[1], det48y);
+ alen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, adet);
+
+ xlen = scale_expansion_zeroelim(cdalen, cda, pb[0], det24x);
+ xlen = scale_expansion_zeroelim(xlen, det24x, -pb[0], det48x);
+ ylen = scale_expansion_zeroelim(cdalen, cda, pb[1], det24y);
+ ylen = scale_expansion_zeroelim(ylen, det24y, -pb[1], det48y);
+ blen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, bdet);
+
+ xlen = scale_expansion_zeroelim(dablen, dab, pc[0], det24x);
+ xlen = scale_expansion_zeroelim(xlen, det24x, pc[0], det48x);
+ ylen = scale_expansion_zeroelim(dablen, dab, pc[1], det24y);
+ ylen = scale_expansion_zeroelim(ylen, det24y, pc[1], det48y);
+ clen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, cdet);
+
+ xlen = scale_expansion_zeroelim(abclen, abc, pd[0], det24x);
+ xlen = scale_expansion_zeroelim(xlen, det24x, -pd[0], det48x);
+ ylen = scale_expansion_zeroelim(abclen, abc, pd[1], det24y);
+ ylen = scale_expansion_zeroelim(ylen, det24y, -pd[1], det48y);
+ dlen = fast_expansion_sum_zeroelim(xlen, det48x, ylen, det48y, ddet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
+ deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL incircleslow(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ INEXACT REAL adx, bdx, cdx, ady, bdy, cdy;
+ REAL adxtail, bdxtail, cdxtail;
+ REAL adytail, bdytail, cdytail;
+ REAL negate, negatetail;
+ INEXACT REAL axby7, bxcy7, axcy7, bxay7, cxby7, cxay7;
+ REAL axby[8], bxcy[8], axcy[8], bxay[8], cxby[8], cxay[8];
+ REAL temp16[16];
+ int temp16len;
+ REAL detx[32], detxx[64], detxt[32], detxxt[64], detxtxt[64];
+ int xlen, xxlen, xtlen, xxtlen, xtxtlen;
+ REAL x1[128], x2[192];
+ int x1len, x2len;
+ REAL dety[32], detyy[64], detyt[32], detyyt[64], detytyt[64];
+ int ylen, yylen, ytlen, yytlen, ytytlen;
+ REAL y1[128], y2[192];
+ int y1len, y2len;
+ REAL adet[384], bdet[384], cdet[384], abdet[768], deter[1152];
+ int alen, blen, clen, ablen, deterlen;
+ int i;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j, _k, _l, _m, _n;
+ REAL _0, _1, _2;
+
+ Two_Diff(pa[0], pd[0], adx, adxtail);
+ Two_Diff(pa[1], pd[1], ady, adytail);
+ Two_Diff(pb[0], pd[0], bdx, bdxtail);
+ Two_Diff(pb[1], pd[1], bdy, bdytail);
+ Two_Diff(pc[0], pd[0], cdx, cdxtail);
+ Two_Diff(pc[1], pd[1], cdy, cdytail);
+
+ Two_Two_Product(adx, adxtail, bdy, bdytail,
+ axby7, axby[6], axby[5], axby[4],
+ axby[3], axby[2], axby[1], axby[0]);
+ axby[7] = axby7;
+ negate = -ady;
+ negatetail = -adytail;
+ Two_Two_Product(bdx, bdxtail, negate, negatetail,
+ bxay7, bxay[6], bxay[5], bxay[4],
+ bxay[3], bxay[2], bxay[1], bxay[0]);
+ bxay[7] = bxay7;
+ Two_Two_Product(bdx, bdxtail, cdy, cdytail,
+ bxcy7, bxcy[6], bxcy[5], bxcy[4],
+ bxcy[3], bxcy[2], bxcy[1], bxcy[0]);
+ bxcy[7] = bxcy7;
+ negate = -bdy;
+ negatetail = -bdytail;
+ Two_Two_Product(cdx, cdxtail, negate, negatetail,
+ cxby7, cxby[6], cxby[5], cxby[4],
+ cxby[3], cxby[2], cxby[1], cxby[0]);
+ cxby[7] = cxby7;
+ Two_Two_Product(cdx, cdxtail, ady, adytail,
+ cxay7, cxay[6], cxay[5], cxay[4],
+ cxay[3], cxay[2], cxay[1], cxay[0]);
+ cxay[7] = cxay7;
+ negate = -cdy;
+ negatetail = -cdytail;
+ Two_Two_Product(adx, adxtail, negate, negatetail,
+ axcy7, axcy[6], axcy[5], axcy[4],
+ axcy[3], axcy[2], axcy[1], axcy[0]);
+ axcy[7] = axcy7;
+
+
+ temp16len = fast_expansion_sum_zeroelim(8, bxcy, 8, cxby, temp16);
+
+ xlen = scale_expansion_zeroelim(temp16len, temp16, adx, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, adx, detxx);
+ xtlen = scale_expansion_zeroelim(temp16len, temp16, adxtail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, adx, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, adxtail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+
+ ylen = scale_expansion_zeroelim(temp16len, temp16, ady, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, ady, detyy);
+ ytlen = scale_expansion_zeroelim(temp16len, temp16, adytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, ady, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, adytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+
+ alen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, adet);
+
+
+ temp16len = fast_expansion_sum_zeroelim(8, cxay, 8, axcy, temp16);
+
+ xlen = scale_expansion_zeroelim(temp16len, temp16, bdx, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, bdx, detxx);
+ xtlen = scale_expansion_zeroelim(temp16len, temp16, bdxtail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, bdx, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, bdxtail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+
+ ylen = scale_expansion_zeroelim(temp16len, temp16, bdy, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, bdy, detyy);
+ ytlen = scale_expansion_zeroelim(temp16len, temp16, bdytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, bdy, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, bdytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+
+ blen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, bdet);
+
+
+ temp16len = fast_expansion_sum_zeroelim(8, axby, 8, bxay, temp16);
+
+ xlen = scale_expansion_zeroelim(temp16len, temp16, cdx, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, cdx, detxx);
+ xtlen = scale_expansion_zeroelim(temp16len, temp16, cdxtail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, cdx, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, cdxtail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+
+ ylen = scale_expansion_zeroelim(temp16len, temp16, cdy, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, cdy, detyy);
+ ytlen = scale_expansion_zeroelim(temp16len, temp16, cdytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, cdy, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, cdytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+
+ clen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, cdet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ deterlen = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL incircleadapt(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL permanent)
+{
+ INEXACT REAL adx, bdx, cdx, ady, bdy, cdy;
+ REAL det, errbound;
+
+ INEXACT REAL bdxcdy1, cdxbdy1, cdxady1, adxcdy1, adxbdy1, bdxady1;
+ REAL bdxcdy0, cdxbdy0, cdxady0, adxcdy0, adxbdy0, bdxady0;
+ REAL bc[4], ca[4], ab[4];
+ INEXACT REAL bc3, ca3, ab3;
+ REAL axbc[8], axxbc[16], aybc[8], ayybc[16], adet[32];
+ int axbclen, axxbclen, aybclen, ayybclen, alen;
+ REAL bxca[8], bxxca[16], byca[8], byyca[16], bdet[32];
+ int bxcalen, bxxcalen, bycalen, byycalen, blen;
+ REAL cxab[8], cxxab[16], cyab[8], cyyab[16], cdet[32];
+ int cxablen, cxxablen, cyablen, cyyablen, clen;
+ REAL abdet[64];
+ int ablen;
+ REAL fin1[1152], fin2[1152];
+ REAL *finnow, *finother, *finswap;
+ int finlength;
+
+ REAL adxtail, bdxtail, cdxtail, adytail, bdytail, cdytail;
+ INEXACT REAL adxadx1, adyady1, bdxbdx1, bdybdy1, cdxcdx1, cdycdy1;
+ REAL adxadx0, adyady0, bdxbdx0, bdybdy0, cdxcdx0, cdycdy0;
+ REAL aa[4], bb[4], cc[4];
+ INEXACT REAL aa3, bb3, cc3;
+ INEXACT REAL ti1, tj1;
+ REAL ti0, tj0;
+ REAL u[4], v[4];
+ INEXACT REAL u3, v3;
+ REAL temp8[8], temp16a[16], temp16b[16], temp16c[16];
+ REAL temp32a[32], temp32b[32], temp48[48], temp64[64];
+ int temp8len, temp16alen, temp16blen, temp16clen;
+ int temp32alen, temp32blen, temp48len, temp64len;
+ REAL axtbb[8], axtcc[8], aytbb[8], aytcc[8];
+ int axtbblen, axtcclen, aytbblen, aytcclen;
+ REAL bxtaa[8], bxtcc[8], bytaa[8], bytcc[8];
+ int bxtaalen, bxtcclen, bytaalen, bytcclen;
+ REAL cxtaa[8], cxtbb[8], cytaa[8], cytbb[8];
+ int cxtaalen, cxtbblen, cytaalen, cytbblen;
+ REAL axtbc[8], aytbc[8], bxtca[8], bytca[8], cxtab[8], cytab[8];
+ int axtbclen, aytbclen, bxtcalen, bytcalen, cxtablen, cytablen;
+ REAL axtbct[16], aytbct[16], bxtcat[16], bytcat[16], cxtabt[16], cytabt[16];
+ int axtbctlen, aytbctlen, bxtcatlen, bytcatlen, cxtabtlen, cytabtlen;
+ REAL axtbctt[8], aytbctt[8], bxtcatt[8];
+ REAL bytcatt[8], cxtabtt[8], cytabtt[8];
+ int axtbcttlen, aytbcttlen, bxtcattlen, bytcattlen, cxtabttlen, cytabttlen;
+ REAL abt[8], bct[8], cat[8];
+ int abtlen, bctlen, catlen;
+ REAL abtt[4], bctt[4], catt[4];
+ int abttlen, bcttlen, cattlen;
+ INEXACT REAL abtt3, bctt3, catt3;
+ REAL negate;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ adx = (REAL) (pa[0] - pd[0]);
+ bdx = (REAL) (pb[0] - pd[0]);
+ cdx = (REAL) (pc[0] - pd[0]);
+ ady = (REAL) (pa[1] - pd[1]);
+ bdy = (REAL) (pb[1] - pd[1]);
+ cdy = (REAL) (pc[1] - pd[1]);
+
+ Two_Product(bdx, cdy, bdxcdy1, bdxcdy0);
+ Two_Product(cdx, bdy, cdxbdy1, cdxbdy0);
+ Two_Two_Diff(bdxcdy1, bdxcdy0, cdxbdy1, cdxbdy0, bc3, bc[2], bc[1], bc[0]);
+ bc[3] = bc3;
+ axbclen = scale_expansion_zeroelim(4, bc, adx, axbc);
+ axxbclen = scale_expansion_zeroelim(axbclen, axbc, adx, axxbc);
+ aybclen = scale_expansion_zeroelim(4, bc, ady, aybc);
+ ayybclen = scale_expansion_zeroelim(aybclen, aybc, ady, ayybc);
+ alen = fast_expansion_sum_zeroelim(axxbclen, axxbc, ayybclen, ayybc, adet);
+
+ Two_Product(cdx, ady, cdxady1, cdxady0);
+ Two_Product(adx, cdy, adxcdy1, adxcdy0);
+ Two_Two_Diff(cdxady1, cdxady0, adxcdy1, adxcdy0, ca3, ca[2], ca[1], ca[0]);
+ ca[3] = ca3;
+ bxcalen = scale_expansion_zeroelim(4, ca, bdx, bxca);
+ bxxcalen = scale_expansion_zeroelim(bxcalen, bxca, bdx, bxxca);
+ bycalen = scale_expansion_zeroelim(4, ca, bdy, byca);
+ byycalen = scale_expansion_zeroelim(bycalen, byca, bdy, byyca);
+ blen = fast_expansion_sum_zeroelim(bxxcalen, bxxca, byycalen, byyca, bdet);
+
+ Two_Product(adx, bdy, adxbdy1, adxbdy0);
+ Two_Product(bdx, ady, bdxady1, bdxady0);
+ Two_Two_Diff(adxbdy1, adxbdy0, bdxady1, bdxady0, ab3, ab[2], ab[1], ab[0]);
+ ab[3] = ab3;
+ cxablen = scale_expansion_zeroelim(4, ab, cdx, cxab);
+ cxxablen = scale_expansion_zeroelim(cxablen, cxab, cdx, cxxab);
+ cyablen = scale_expansion_zeroelim(4, ab, cdy, cyab);
+ cyyablen = scale_expansion_zeroelim(cyablen, cyab, cdy, cyyab);
+ clen = fast_expansion_sum_zeroelim(cxxablen, cxxab, cyyablen, cyyab, cdet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ finlength = fast_expansion_sum_zeroelim(ablen, abdet, clen, cdet, fin1);
+
+ det = estimate(finlength, fin1);
+ errbound = iccerrboundB * permanent;
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ Two_Diff_Tail(pa[0], pd[0], adx, adxtail);
+ Two_Diff_Tail(pa[1], pd[1], ady, adytail);
+ Two_Diff_Tail(pb[0], pd[0], bdx, bdxtail);
+ Two_Diff_Tail(pb[1], pd[1], bdy, bdytail);
+ Two_Diff_Tail(pc[0], pd[0], cdx, cdxtail);
+ Two_Diff_Tail(pc[1], pd[1], cdy, cdytail);
+ if ((adxtail == 0.0) && (bdxtail == 0.0) && (cdxtail == 0.0)
+ && (adytail == 0.0) && (bdytail == 0.0) && (cdytail == 0.0)) {
+ return det;
+ }
+
+ errbound = iccerrboundC * permanent + resulterrbound * Absolute(det);
+ det += ((adx * adx + ady * ady) * ((bdx * cdytail + cdy * bdxtail)
+ - (bdy * cdxtail + cdx * bdytail))
+ + 2.0 * (adx * adxtail + ady * adytail) * (bdx * cdy - bdy * cdx))
+ + ((bdx * bdx + bdy * bdy) * ((cdx * adytail + ady * cdxtail)
+ - (cdy * adxtail + adx * cdytail))
+ + 2.0 * (bdx * bdxtail + bdy * bdytail) * (cdx * ady - cdy * adx))
+ + ((cdx * cdx + cdy * cdy) * ((adx * bdytail + bdy * adxtail)
+ - (ady * bdxtail + bdx * adytail))
+ + 2.0 * (cdx * cdxtail + cdy * cdytail) * (adx * bdy - ady * bdx));
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ finnow = fin1;
+ finother = fin2;
+
+ if ((bdxtail != 0.0) || (bdytail != 0.0)
+ || (cdxtail != 0.0) || (cdytail != 0.0)) {
+ Square(adx, adxadx1, adxadx0);
+ Square(ady, adyady1, adyady0);
+ Two_Two_Sum(adxadx1, adxadx0, adyady1, adyady0, aa3, aa[2], aa[1], aa[0]);
+ aa[3] = aa3;
+ }
+ if ((cdxtail != 0.0) || (cdytail != 0.0)
+ || (adxtail != 0.0) || (adytail != 0.0)) {
+ Square(bdx, bdxbdx1, bdxbdx0);
+ Square(bdy, bdybdy1, bdybdy0);
+ Two_Two_Sum(bdxbdx1, bdxbdx0, bdybdy1, bdybdy0, bb3, bb[2], bb[1], bb[0]);
+ bb[3] = bb3;
+ }
+ if ((adxtail != 0.0) || (adytail != 0.0)
+ || (bdxtail != 0.0) || (bdytail != 0.0)) {
+ Square(cdx, cdxcdx1, cdxcdx0);
+ Square(cdy, cdycdy1, cdycdy0);
+ Two_Two_Sum(cdxcdx1, cdxcdx0, cdycdy1, cdycdy0, cc3, cc[2], cc[1], cc[0]);
+ cc[3] = cc3;
+ }
+
+ if (adxtail != 0.0) {
+ axtbclen = scale_expansion_zeroelim(4, bc, adxtail, axtbc);
+ temp16alen = scale_expansion_zeroelim(axtbclen, axtbc, 2.0 * adx,
+ temp16a);
+
+ axtcclen = scale_expansion_zeroelim(4, cc, adxtail, axtcc);
+ temp16blen = scale_expansion_zeroelim(axtcclen, axtcc, bdy, temp16b);
+
+ axtbblen = scale_expansion_zeroelim(4, bb, adxtail, axtbb);
+ temp16clen = scale_expansion_zeroelim(axtbblen, axtbb, -cdy, temp16c);
+
+ temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (adytail != 0.0) {
+ aytbclen = scale_expansion_zeroelim(4, bc, adytail, aytbc);
+ temp16alen = scale_expansion_zeroelim(aytbclen, aytbc, 2.0 * ady,
+ temp16a);
+
+ aytbblen = scale_expansion_zeroelim(4, bb, adytail, aytbb);
+ temp16blen = scale_expansion_zeroelim(aytbblen, aytbb, cdx, temp16b);
+
+ aytcclen = scale_expansion_zeroelim(4, cc, adytail, aytcc);
+ temp16clen = scale_expansion_zeroelim(aytcclen, aytcc, -bdx, temp16c);
+
+ temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (bdxtail != 0.0) {
+ bxtcalen = scale_expansion_zeroelim(4, ca, bdxtail, bxtca);
+ temp16alen = scale_expansion_zeroelim(bxtcalen, bxtca, 2.0 * bdx,
+ temp16a);
+
+ bxtaalen = scale_expansion_zeroelim(4, aa, bdxtail, bxtaa);
+ temp16blen = scale_expansion_zeroelim(bxtaalen, bxtaa, cdy, temp16b);
+
+ bxtcclen = scale_expansion_zeroelim(4, cc, bdxtail, bxtcc);
+ temp16clen = scale_expansion_zeroelim(bxtcclen, bxtcc, -ady, temp16c);
+
+ temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (bdytail != 0.0) {
+ bytcalen = scale_expansion_zeroelim(4, ca, bdytail, bytca);
+ temp16alen = scale_expansion_zeroelim(bytcalen, bytca, 2.0 * bdy,
+ temp16a);
+
+ bytcclen = scale_expansion_zeroelim(4, cc, bdytail, bytcc);
+ temp16blen = scale_expansion_zeroelim(bytcclen, bytcc, adx, temp16b);
+
+ bytaalen = scale_expansion_zeroelim(4, aa, bdytail, bytaa);
+ temp16clen = scale_expansion_zeroelim(bytaalen, bytaa, -cdx, temp16c);
+
+ temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (cdxtail != 0.0) {
+ cxtablen = scale_expansion_zeroelim(4, ab, cdxtail, cxtab);
+ temp16alen = scale_expansion_zeroelim(cxtablen, cxtab, 2.0 * cdx,
+ temp16a);
+
+ cxtbblen = scale_expansion_zeroelim(4, bb, cdxtail, cxtbb);
+ temp16blen = scale_expansion_zeroelim(cxtbblen, cxtbb, ady, temp16b);
+
+ cxtaalen = scale_expansion_zeroelim(4, aa, cdxtail, cxtaa);
+ temp16clen = scale_expansion_zeroelim(cxtaalen, cxtaa, -bdy, temp16c);
+
+ temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (cdytail != 0.0) {
+ cytablen = scale_expansion_zeroelim(4, ab, cdytail, cytab);
+ temp16alen = scale_expansion_zeroelim(cytablen, cytab, 2.0 * cdy,
+ temp16a);
+
+ cytaalen = scale_expansion_zeroelim(4, aa, cdytail, cytaa);
+ temp16blen = scale_expansion_zeroelim(cytaalen, cytaa, bdx, temp16b);
+
+ cytbblen = scale_expansion_zeroelim(4, bb, cdytail, cytbb);
+ temp16clen = scale_expansion_zeroelim(cytbblen, cytbb, -adx, temp16c);
+
+ temp32alen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16clen, temp16c,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+
+ if ((adxtail != 0.0) || (adytail != 0.0)) {
+ if ((bdxtail != 0.0) || (bdytail != 0.0)
+ || (cdxtail != 0.0) || (cdytail != 0.0)) {
+ Two_Product(bdxtail, cdy, ti1, ti0);
+ Two_Product(bdx, cdytail, tj1, tj0);
+ Two_Two_Sum(ti1, ti0, tj1, tj0, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ negate = -bdy;
+ Two_Product(cdxtail, negate, ti1, ti0);
+ negate = -bdytail;
+ Two_Product(cdx, negate, tj1, tj0);
+ Two_Two_Sum(ti1, ti0, tj1, tj0, v3, v[2], v[1], v[0]);
+ v[3] = v3;
+ bctlen = fast_expansion_sum_zeroelim(4, u, 4, v, bct);
+
+ Two_Product(bdxtail, cdytail, ti1, ti0);
+ Two_Product(cdxtail, bdytail, tj1, tj0);
+ Two_Two_Diff(ti1, ti0, tj1, tj0, bctt3, bctt[2], bctt[1], bctt[0]);
+ bctt[3] = bctt3;
+ bcttlen = 4;
+ } else {
+ bct[0] = 0.0;
+ bctlen = 1;
+ bctt[0] = 0.0;
+ bcttlen = 1;
+ }
+
+ if (adxtail != 0.0) {
+ temp16alen = scale_expansion_zeroelim(axtbclen, axtbc, adxtail, temp16a);
+ axtbctlen = scale_expansion_zeroelim(bctlen, bct, adxtail, axtbct);
+ temp32alen = scale_expansion_zeroelim(axtbctlen, axtbct, 2.0 * adx,
+ temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (bdytail != 0.0) {
+ temp8len = scale_expansion_zeroelim(4, cc, adxtail, temp8);
+ temp16alen = scale_expansion_zeroelim(temp8len, temp8, bdytail,
+ temp16a);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
+ temp16a, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (cdytail != 0.0) {
+ temp8len = scale_expansion_zeroelim(4, bb, -adxtail, temp8);
+ temp16alen = scale_expansion_zeroelim(temp8len, temp8, cdytail,
+ temp16a);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
+ temp16a, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+
+ temp32alen = scale_expansion_zeroelim(axtbctlen, axtbct, adxtail,
+ temp32a);
+ axtbcttlen = scale_expansion_zeroelim(bcttlen, bctt, adxtail, axtbctt);
+ temp16alen = scale_expansion_zeroelim(axtbcttlen, axtbctt, 2.0 * adx,
+ temp16a);
+ temp16blen = scale_expansion_zeroelim(axtbcttlen, axtbctt, adxtail,
+ temp16b);
+ temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32b);
+ temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
+ temp64, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (adytail != 0.0) {
+ temp16alen = scale_expansion_zeroelim(aytbclen, aytbc, adytail, temp16a);
+ aytbctlen = scale_expansion_zeroelim(bctlen, bct, adytail, aytbct);
+ temp32alen = scale_expansion_zeroelim(aytbctlen, aytbct, 2.0 * ady,
+ temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+
+
+ temp32alen = scale_expansion_zeroelim(aytbctlen, aytbct, adytail,
+ temp32a);
+ aytbcttlen = scale_expansion_zeroelim(bcttlen, bctt, adytail, aytbctt);
+ temp16alen = scale_expansion_zeroelim(aytbcttlen, aytbctt, 2.0 * ady,
+ temp16a);
+ temp16blen = scale_expansion_zeroelim(aytbcttlen, aytbctt, adytail,
+ temp16b);
+ temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32b);
+ temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
+ temp64, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ if ((bdxtail != 0.0) || (bdytail != 0.0)) {
+ if ((cdxtail != 0.0) || (cdytail != 0.0)
+ || (adxtail != 0.0) || (adytail != 0.0)) {
+ Two_Product(cdxtail, ady, ti1, ti0);
+ Two_Product(cdx, adytail, tj1, tj0);
+ Two_Two_Sum(ti1, ti0, tj1, tj0, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ negate = -cdy;
+ Two_Product(adxtail, negate, ti1, ti0);
+ negate = -cdytail;
+ Two_Product(adx, negate, tj1, tj0);
+ Two_Two_Sum(ti1, ti0, tj1, tj0, v3, v[2], v[1], v[0]);
+ v[3] = v3;
+ catlen = fast_expansion_sum_zeroelim(4, u, 4, v, cat);
+
+ Two_Product(cdxtail, adytail, ti1, ti0);
+ Two_Product(adxtail, cdytail, tj1, tj0);
+ Two_Two_Diff(ti1, ti0, tj1, tj0, catt3, catt[2], catt[1], catt[0]);
+ catt[3] = catt3;
+ cattlen = 4;
+ } else {
+ cat[0] = 0.0;
+ catlen = 1;
+ catt[0] = 0.0;
+ cattlen = 1;
+ }
+
+ if (bdxtail != 0.0) {
+ temp16alen = scale_expansion_zeroelim(bxtcalen, bxtca, bdxtail, temp16a);
+ bxtcatlen = scale_expansion_zeroelim(catlen, cat, bdxtail, bxtcat);
+ temp32alen = scale_expansion_zeroelim(bxtcatlen, bxtcat, 2.0 * bdx,
+ temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (cdytail != 0.0) {
+ temp8len = scale_expansion_zeroelim(4, aa, bdxtail, temp8);
+ temp16alen = scale_expansion_zeroelim(temp8len, temp8, cdytail,
+ temp16a);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
+ temp16a, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (adytail != 0.0) {
+ temp8len = scale_expansion_zeroelim(4, cc, -bdxtail, temp8);
+ temp16alen = scale_expansion_zeroelim(temp8len, temp8, adytail,
+ temp16a);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
+ temp16a, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+
+ temp32alen = scale_expansion_zeroelim(bxtcatlen, bxtcat, bdxtail,
+ temp32a);
+ bxtcattlen = scale_expansion_zeroelim(cattlen, catt, bdxtail, bxtcatt);
+ temp16alen = scale_expansion_zeroelim(bxtcattlen, bxtcatt, 2.0 * bdx,
+ temp16a);
+ temp16blen = scale_expansion_zeroelim(bxtcattlen, bxtcatt, bdxtail,
+ temp16b);
+ temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32b);
+ temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
+ temp64, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (bdytail != 0.0) {
+ temp16alen = scale_expansion_zeroelim(bytcalen, bytca, bdytail, temp16a);
+ bytcatlen = scale_expansion_zeroelim(catlen, cat, bdytail, bytcat);
+ temp32alen = scale_expansion_zeroelim(bytcatlen, bytcat, 2.0 * bdy,
+ temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+
+
+ temp32alen = scale_expansion_zeroelim(bytcatlen, bytcat, bdytail,
+ temp32a);
+ bytcattlen = scale_expansion_zeroelim(cattlen, catt, bdytail, bytcatt);
+ temp16alen = scale_expansion_zeroelim(bytcattlen, bytcatt, 2.0 * bdy,
+ temp16a);
+ temp16blen = scale_expansion_zeroelim(bytcattlen, bytcatt, bdytail,
+ temp16b);
+ temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32b);
+ temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
+ temp64, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+ if ((cdxtail != 0.0) || (cdytail != 0.0)) {
+ if ((adxtail != 0.0) || (adytail != 0.0)
+ || (bdxtail != 0.0) || (bdytail != 0.0)) {
+ Two_Product(adxtail, bdy, ti1, ti0);
+ Two_Product(adx, bdytail, tj1, tj0);
+ Two_Two_Sum(ti1, ti0, tj1, tj0, u3, u[2], u[1], u[0]);
+ u[3] = u3;
+ negate = -ady;
+ Two_Product(bdxtail, negate, ti1, ti0);
+ negate = -adytail;
+ Two_Product(bdx, negate, tj1, tj0);
+ Two_Two_Sum(ti1, ti0, tj1, tj0, v3, v[2], v[1], v[0]);
+ v[3] = v3;
+ abtlen = fast_expansion_sum_zeroelim(4, u, 4, v, abt);
+
+ Two_Product(adxtail, bdytail, ti1, ti0);
+ Two_Product(bdxtail, adytail, tj1, tj0);
+ Two_Two_Diff(ti1, ti0, tj1, tj0, abtt3, abtt[2], abtt[1], abtt[0]);
+ abtt[3] = abtt3;
+ abttlen = 4;
+ } else {
+ abt[0] = 0.0;
+ abtlen = 1;
+ abtt[0] = 0.0;
+ abttlen = 1;
+ }
+
+ if (cdxtail != 0.0) {
+ temp16alen = scale_expansion_zeroelim(cxtablen, cxtab, cdxtail, temp16a);
+ cxtabtlen = scale_expansion_zeroelim(abtlen, abt, cdxtail, cxtabt);
+ temp32alen = scale_expansion_zeroelim(cxtabtlen, cxtabt, 2.0 * cdx,
+ temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ if (adytail != 0.0) {
+ temp8len = scale_expansion_zeroelim(4, bb, cdxtail, temp8);
+ temp16alen = scale_expansion_zeroelim(temp8len, temp8, adytail,
+ temp16a);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
+ temp16a, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (bdytail != 0.0) {
+ temp8len = scale_expansion_zeroelim(4, aa, -cdxtail, temp8);
+ temp16alen = scale_expansion_zeroelim(temp8len, temp8, bdytail,
+ temp16a);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp16alen,
+ temp16a, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+
+ temp32alen = scale_expansion_zeroelim(cxtabtlen, cxtabt, cdxtail,
+ temp32a);
+ cxtabttlen = scale_expansion_zeroelim(abttlen, abtt, cdxtail, cxtabtt);
+ temp16alen = scale_expansion_zeroelim(cxtabttlen, cxtabtt, 2.0 * cdx,
+ temp16a);
+ temp16blen = scale_expansion_zeroelim(cxtabttlen, cxtabtt, cdxtail,
+ temp16b);
+ temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32b);
+ temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
+ temp64, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ if (cdytail != 0.0) {
+ temp16alen = scale_expansion_zeroelim(cytablen, cytab, cdytail, temp16a);
+ cytabtlen = scale_expansion_zeroelim(abtlen, abt, cdytail, cytabt);
+ temp32alen = scale_expansion_zeroelim(cytabtlen, cytabt, 2.0 * cdy,
+ temp32a);
+ temp48len = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp32alen, temp32a, temp48);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp48len,
+ temp48, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+
+
+ temp32alen = scale_expansion_zeroelim(cytabtlen, cytabt, cdytail,
+ temp32a);
+ cytabttlen = scale_expansion_zeroelim(abttlen, abtt, cdytail, cytabtt);
+ temp16alen = scale_expansion_zeroelim(cytabttlen, cytabtt, 2.0 * cdy,
+ temp16a);
+ temp16blen = scale_expansion_zeroelim(cytabttlen, cytabtt, cdytail,
+ temp16b);
+ temp32blen = fast_expansion_sum_zeroelim(temp16alen, temp16a,
+ temp16blen, temp16b, temp32b);
+ temp64len = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64);
+ finlength = fast_expansion_sum_zeroelim(finlength, finnow, temp64len,
+ temp64, finother);
+ finswap = finnow; finnow = finother; finother = finswap;
+ }
+ }
+
+ return finnow[finlength - 1];
+}
+
+REAL incircle(REAL *pa, REAL *pb, REAL *pc, REAL *pd)
+{
+ REAL adx, bdx, cdx, ady, bdy, cdy;
+ REAL bdxcdy, cdxbdy, cdxady, adxcdy, adxbdy, bdxady;
+ REAL alift, blift, clift;
+ REAL det;
+ REAL permanent, errbound;
+
+ adx = pa[0] - pd[0];
+ bdx = pb[0] - pd[0];
+ cdx = pc[0] - pd[0];
+ ady = pa[1] - pd[1];
+ bdy = pb[1] - pd[1];
+ cdy = pc[1] - pd[1];
+
+ bdxcdy = bdx * cdy;
+ cdxbdy = cdx * bdy;
+ alift = adx * adx + ady * ady;
+
+ cdxady = cdx * ady;
+ adxcdy = adx * cdy;
+ blift = bdx * bdx + bdy * bdy;
+
+ adxbdy = adx * bdy;
+ bdxady = bdx * ady;
+ clift = cdx * cdx + cdy * cdy;
+
+ det = alift * (bdxcdy - cdxbdy)
+ + blift * (cdxady - adxcdy)
+ + clift * (adxbdy - bdxady);
+
+ permanent = (Absolute(bdxcdy) + Absolute(cdxbdy)) * alift
+ + (Absolute(cdxady) + Absolute(adxcdy)) * blift
+ + (Absolute(adxbdy) + Absolute(bdxady)) * clift;
+ errbound = iccerrboundA * permanent;
+ if ((det > errbound) || (-det > errbound)) {
+ return det;
+ }
+
+ return incircleadapt(pa, pb, pc, pd, permanent);
+}
+
+/*****************************************************************************/
+/* */
+/* inspherefast() Approximate 3D insphere test. Nonrobust. */
+/* insphereexact() Exact 3D insphere test. Robust. */
+/* insphereslow() Another exact 3D insphere test. Robust. */
+/* insphere() Adaptive exact 3D insphere test. Robust. */
+/* */
+/* Return a positive value if the point pe lies inside the */
+/* sphere passing through pa, pb, pc, and pd; a negative value */
+/* if it lies outside; and zero if the five points are */
+/* cospherical. The points pa, pb, pc, and pd must be ordered */
+/* so that they have a positive orientation (as defined by */
+/* orient3d()), or the sign of the result will be reversed. */
+/* */
+/* Only the first and last routine should be used; the middle two are for */
+/* timings. */
+/* */
+/* The last three use exact arithmetic to ensure a correct answer. The */
+/* result returned is the determinant of a matrix. In insphere() only, */
+/* this determinant is computed adaptively, in the sense that exact */
+/* arithmetic is used only to the degree it is needed to ensure that the */
+/* returned value has the correct sign. Hence, insphere() is usually quite */
+/* fast, but will run more slowly when the input points are cospherical or */
+/* nearly so. */
+/* */
+/*****************************************************************************/
+
+REAL inspherefast(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
+{
+ REAL aex, bex, cex, dex;
+ REAL aey, bey, cey, dey;
+ REAL aez, bez, cez, dez;
+ REAL alift, blift, clift, dlift;
+ REAL ab, bc, cd, da, ac, bd;
+ REAL abc, bcd, cda, dab;
+
+ aex = pa[0] - pe[0];
+ bex = pb[0] - pe[0];
+ cex = pc[0] - pe[0];
+ dex = pd[0] - pe[0];
+ aey = pa[1] - pe[1];
+ bey = pb[1] - pe[1];
+ cey = pc[1] - pe[1];
+ dey = pd[1] - pe[1];
+ aez = pa[2] - pe[2];
+ bez = pb[2] - pe[2];
+ cez = pc[2] - pe[2];
+ dez = pd[2] - pe[2];
+
+ ab = aex * bey - bex * aey;
+ bc = bex * cey - cex * bey;
+ cd = cex * dey - dex * cey;
+ da = dex * aey - aex * dey;
+
+ ac = aex * cey - cex * aey;
+ bd = bex * dey - dex * bey;
+
+ abc = aez * bc - bez * ac + cez * ab;
+ bcd = bez * cd - cez * bd + dez * bc;
+ cda = cez * da + dez * ac + aez * cd;
+ dab = dez * ab + aez * bd + bez * da;
+
+ alift = aex * aex + aey * aey + aez * aez;
+ blift = bex * bex + bey * bey + bez * bez;
+ clift = cex * cex + cey * cey + cez * cez;
+ dlift = dex * dex + dey * dey + dez * dez;
+
+ return (dlift * abc - clift * dab) + (blift * cda - alift * bcd);
+}
+
+REAL insphereexact(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
+{
+ INEXACT REAL axby1, bxcy1, cxdy1, dxey1, exay1;
+ INEXACT REAL bxay1, cxby1, dxcy1, exdy1, axey1;
+ INEXACT REAL axcy1, bxdy1, cxey1, dxay1, exby1;
+ INEXACT REAL cxay1, dxby1, excy1, axdy1, bxey1;
+ REAL axby0, bxcy0, cxdy0, dxey0, exay0;
+ REAL bxay0, cxby0, dxcy0, exdy0, axey0;
+ REAL axcy0, bxdy0, cxey0, dxay0, exby0;
+ REAL cxay0, dxby0, excy0, axdy0, bxey0;
+ REAL ab[4], bc[4], cd[4], de[4], ea[4];
+ REAL ac[4], bd[4], ce[4], da[4], eb[4];
+ REAL temp8a[8], temp8b[8], temp16[16];
+ int temp8alen, temp8blen, temp16len;
+ REAL abc[24], bcd[24], cde[24], dea[24], eab[24];
+ REAL abd[24], bce[24], cda[24], deb[24], eac[24];
+ int abclen, bcdlen, cdelen, dealen, eablen;
+ int abdlen, bcelen, cdalen, deblen, eaclen;
+ REAL temp48a[48], temp48b[48];
+ int temp48alen, temp48blen;
+ REAL abcd[96], bcde[96], cdea[96], deab[96], eabc[96];
+ int abcdlen, bcdelen, cdealen, deablen, eabclen;
+ REAL temp192[192];
+ REAL det384x[384], det384y[384], det384z[384];
+ int xlen, ylen, zlen;
+ REAL detxy[768];
+ int xylen;
+ REAL adet[1152], bdet[1152], cdet[1152], ddet[1152], edet[1152];
+ int alen, blen, clen, dlen, elen;
+ REAL abdet[2304], cddet[2304], cdedet[3456];
+ int ablen, cdlen;
+ REAL deter[5760];
+ int deterlen;
+ int i;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ Two_Product(pa[0], pb[1], axby1, axby0);
+ Two_Product(pb[0], pa[1], bxay1, bxay0);
+ Two_Two_Diff(axby1, axby0, bxay1, bxay0, ab[3], ab[2], ab[1], ab[0]);
+
+ Two_Product(pb[0], pc[1], bxcy1, bxcy0);
+ Two_Product(pc[0], pb[1], cxby1, cxby0);
+ Two_Two_Diff(bxcy1, bxcy0, cxby1, cxby0, bc[3], bc[2], bc[1], bc[0]);
+
+ Two_Product(pc[0], pd[1], cxdy1, cxdy0);
+ Two_Product(pd[0], pc[1], dxcy1, dxcy0);
+ Two_Two_Diff(cxdy1, cxdy0, dxcy1, dxcy0, cd[3], cd[2], cd[1], cd[0]);
+
+ Two_Product(pd[0], pe[1], dxey1, dxey0);
+ Two_Product(pe[0], pd[1], exdy1, exdy0);
+ Two_Two_Diff(dxey1, dxey0, exdy1, exdy0, de[3], de[2], de[1], de[0]);
+
+ Two_Product(pe[0], pa[1], exay1, exay0);
+ Two_Product(pa[0], pe[1], axey1, axey0);
+ Two_Two_Diff(exay1, exay0, axey1, axey0, ea[3], ea[2], ea[1], ea[0]);
+
+ Two_Product(pa[0], pc[1], axcy1, axcy0);
+ Two_Product(pc[0], pa[1], cxay1, cxay0);
+ Two_Two_Diff(axcy1, axcy0, cxay1, cxay0, ac[3], ac[2], ac[1], ac[0]);
+
+ Two_Product(pb[0], pd[1], bxdy1, bxdy0);
+ Two_Product(pd[0], pb[1], dxby1, dxby0);
+ Two_Two_Diff(bxdy1, bxdy0, dxby1, dxby0, bd[3], bd[2], bd[1], bd[0]);
+
+ Two_Product(pc[0], pe[1], cxey1, cxey0);
+ Two_Product(pe[0], pc[1], excy1, excy0);
+ Two_Two_Diff(cxey1, cxey0, excy1, excy0, ce[3], ce[2], ce[1], ce[0]);
+
+ Two_Product(pd[0], pa[1], dxay1, dxay0);
+ Two_Product(pa[0], pd[1], axdy1, axdy0);
+ Two_Two_Diff(dxay1, dxay0, axdy1, axdy0, da[3], da[2], da[1], da[0]);
+
+ Two_Product(pe[0], pb[1], exby1, exby0);
+ Two_Product(pb[0], pe[1], bxey1, bxey0);
+ Two_Two_Diff(exby1, exby0, bxey1, bxey0, eb[3], eb[2], eb[1], eb[0]);
+
+ temp8alen = scale_expansion_zeroelim(4, bc, pa[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, ac, -pb[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, ab, pc[2], temp8a);
+ abclen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ abc);
+
+ temp8alen = scale_expansion_zeroelim(4, cd, pb[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, bd, -pc[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, bc, pd[2], temp8a);
+ bcdlen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ bcd);
+
+ temp8alen = scale_expansion_zeroelim(4, de, pc[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, ce, -pd[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, cd, pe[2], temp8a);
+ cdelen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ cde);
+
+ temp8alen = scale_expansion_zeroelim(4, ea, pd[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, da, -pe[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, de, pa[2], temp8a);
+ dealen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ dea);
+
+ temp8alen = scale_expansion_zeroelim(4, ab, pe[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, eb, -pa[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, ea, pb[2], temp8a);
+ eablen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ eab);
+
+ temp8alen = scale_expansion_zeroelim(4, bd, pa[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, da, pb[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, ab, pd[2], temp8a);
+ abdlen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ abd);
+
+ temp8alen = scale_expansion_zeroelim(4, ce, pb[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, eb, pc[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, bc, pe[2], temp8a);
+ bcelen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ bce);
+
+ temp8alen = scale_expansion_zeroelim(4, da, pc[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, ac, pd[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, cd, pa[2], temp8a);
+ cdalen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ cda);
+
+ temp8alen = scale_expansion_zeroelim(4, eb, pd[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, bd, pe[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, de, pb[2], temp8a);
+ deblen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ deb);
+
+ temp8alen = scale_expansion_zeroelim(4, ac, pe[2], temp8a);
+ temp8blen = scale_expansion_zeroelim(4, ce, pa[2], temp8b);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp8blen, temp8b,
+ temp16);
+ temp8alen = scale_expansion_zeroelim(4, ea, pc[2], temp8a);
+ eaclen = fast_expansion_sum_zeroelim(temp8alen, temp8a, temp16len, temp16,
+ eac);
+
+ temp48alen = fast_expansion_sum_zeroelim(cdelen, cde, bcelen, bce, temp48a);
+ temp48blen = fast_expansion_sum_zeroelim(deblen, deb, bcdlen, bcd, temp48b);
+ for (i = 0; i < temp48blen; i++) {
+ temp48b[i] = -temp48b[i];
+ }
+ bcdelen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
+ temp48blen, temp48b, bcde);
+ xlen = scale_expansion_zeroelim(bcdelen, bcde, pa[0], temp192);
+ xlen = scale_expansion_zeroelim(xlen, temp192, pa[0], det384x);
+ ylen = scale_expansion_zeroelim(bcdelen, bcde, pa[1], temp192);
+ ylen = scale_expansion_zeroelim(ylen, temp192, pa[1], det384y);
+ zlen = scale_expansion_zeroelim(bcdelen, bcde, pa[2], temp192);
+ zlen = scale_expansion_zeroelim(zlen, temp192, pa[2], det384z);
+ xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
+ alen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, adet);
+
+ temp48alen = fast_expansion_sum_zeroelim(dealen, dea, cdalen, cda, temp48a);
+ temp48blen = fast_expansion_sum_zeroelim(eaclen, eac, cdelen, cde, temp48b);
+ for (i = 0; i < temp48blen; i++) {
+ temp48b[i] = -temp48b[i];
+ }
+ cdealen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
+ temp48blen, temp48b, cdea);
+ xlen = scale_expansion_zeroelim(cdealen, cdea, pb[0], temp192);
+ xlen = scale_expansion_zeroelim(xlen, temp192, pb[0], det384x);
+ ylen = scale_expansion_zeroelim(cdealen, cdea, pb[1], temp192);
+ ylen = scale_expansion_zeroelim(ylen, temp192, pb[1], det384y);
+ zlen = scale_expansion_zeroelim(cdealen, cdea, pb[2], temp192);
+ zlen = scale_expansion_zeroelim(zlen, temp192, pb[2], det384z);
+ xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
+ blen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, bdet);
+
+ temp48alen = fast_expansion_sum_zeroelim(eablen, eab, deblen, deb, temp48a);
+ temp48blen = fast_expansion_sum_zeroelim(abdlen, abd, dealen, dea, temp48b);
+ for (i = 0; i < temp48blen; i++) {
+ temp48b[i] = -temp48b[i];
+ }
+ deablen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
+ temp48blen, temp48b, deab);
+ xlen = scale_expansion_zeroelim(deablen, deab, pc[0], temp192);
+ xlen = scale_expansion_zeroelim(xlen, temp192, pc[0], det384x);
+ ylen = scale_expansion_zeroelim(deablen, deab, pc[1], temp192);
+ ylen = scale_expansion_zeroelim(ylen, temp192, pc[1], det384y);
+ zlen = scale_expansion_zeroelim(deablen, deab, pc[2], temp192);
+ zlen = scale_expansion_zeroelim(zlen, temp192, pc[2], det384z);
+ xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
+ clen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, cdet);
+
+ temp48alen = fast_expansion_sum_zeroelim(abclen, abc, eaclen, eac, temp48a);
+ temp48blen = fast_expansion_sum_zeroelim(bcelen, bce, eablen, eab, temp48b);
+ for (i = 0; i < temp48blen; i++) {
+ temp48b[i] = -temp48b[i];
+ }
+ eabclen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
+ temp48blen, temp48b, eabc);
+ xlen = scale_expansion_zeroelim(eabclen, eabc, pd[0], temp192);
+ xlen = scale_expansion_zeroelim(xlen, temp192, pd[0], det384x);
+ ylen = scale_expansion_zeroelim(eabclen, eabc, pd[1], temp192);
+ ylen = scale_expansion_zeroelim(ylen, temp192, pd[1], det384y);
+ zlen = scale_expansion_zeroelim(eabclen, eabc, pd[2], temp192);
+ zlen = scale_expansion_zeroelim(zlen, temp192, pd[2], det384z);
+ xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
+ dlen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, ddet);
+
+ temp48alen = fast_expansion_sum_zeroelim(bcdlen, bcd, abdlen, abd, temp48a);
+ temp48blen = fast_expansion_sum_zeroelim(cdalen, cda, abclen, abc, temp48b);
+ for (i = 0; i < temp48blen; i++) {
+ temp48b[i] = -temp48b[i];
+ }
+ abcdlen = fast_expansion_sum_zeroelim(temp48alen, temp48a,
+ temp48blen, temp48b, abcd);
+ xlen = scale_expansion_zeroelim(abcdlen, abcd, pe[0], temp192);
+ xlen = scale_expansion_zeroelim(xlen, temp192, pe[0], det384x);
+ ylen = scale_expansion_zeroelim(abcdlen, abcd, pe[1], temp192);
+ ylen = scale_expansion_zeroelim(ylen, temp192, pe[1], det384y);
+ zlen = scale_expansion_zeroelim(abcdlen, abcd, pe[2], temp192);
+ zlen = scale_expansion_zeroelim(zlen, temp192, pe[2], det384z);
+ xylen = fast_expansion_sum_zeroelim(xlen, det384x, ylen, det384y, detxy);
+ elen = fast_expansion_sum_zeroelim(xylen, detxy, zlen, det384z, edet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
+ cdelen = fast_expansion_sum_zeroelim(cdlen, cddet, elen, edet, cdedet);
+ deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdelen, cdedet, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL insphereslow(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
+{
+ INEXACT REAL aex, bex, cex, dex, aey, bey, cey, dey, aez, bez, cez, dez;
+ REAL aextail, bextail, cextail, dextail;
+ REAL aeytail, beytail, ceytail, deytail;
+ REAL aeztail, beztail, ceztail, deztail;
+ REAL negate, negatetail;
+ INEXACT REAL axby7, bxcy7, cxdy7, dxay7, axcy7, bxdy7;
+ INEXACT REAL bxay7, cxby7, dxcy7, axdy7, cxay7, dxby7;
+ REAL axby[8], bxcy[8], cxdy[8], dxay[8], axcy[8], bxdy[8];
+ REAL bxay[8], cxby[8], dxcy[8], axdy[8], cxay[8], dxby[8];
+ REAL ab[16], bc[16], cd[16], da[16], ac[16], bd[16];
+ int ablen, bclen, cdlen, dalen, aclen, bdlen;
+ REAL temp32a[32], temp32b[32], temp64a[64], temp64b[64], temp64c[64];
+ int temp32alen, temp32blen, temp64alen, temp64blen, temp64clen;
+ REAL temp128[128], temp192[192];
+ int temp128len, temp192len;
+ REAL detx[384], detxx[768], detxt[384], detxxt[768], detxtxt[768];
+ int xlen, xxlen, xtlen, xxtlen, xtxtlen;
+ REAL x1[1536], x2[2304];
+ int x1len, x2len;
+ REAL dety[384], detyy[768], detyt[384], detyyt[768], detytyt[768];
+ int ylen, yylen, ytlen, yytlen, ytytlen;
+ REAL y1[1536], y2[2304];
+ int y1len, y2len;
+ REAL detz[384], detzz[768], detzt[384], detzzt[768], detztzt[768];
+ int zlen, zzlen, ztlen, zztlen, ztztlen;
+ REAL z1[1536], z2[2304];
+ int z1len, z2len;
+ REAL detxy[4608];
+ int xylen;
+ REAL adet[6912], bdet[6912], cdet[6912], ddet[6912];
+ int alen, blen, clen, dlen;
+ REAL abdet[13824], cddet[13824], deter[27648];
+ int deterlen;
+ int i;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL a0hi, a0lo, a1hi, a1lo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j, _k, _l, _m, _n;
+ REAL _0, _1, _2;
+
+ Two_Diff(pa[0], pe[0], aex, aextail);
+ Two_Diff(pa[1], pe[1], aey, aeytail);
+ Two_Diff(pa[2], pe[2], aez, aeztail);
+ Two_Diff(pb[0], pe[0], bex, bextail);
+ Two_Diff(pb[1], pe[1], bey, beytail);
+ Two_Diff(pb[2], pe[2], bez, beztail);
+ Two_Diff(pc[0], pe[0], cex, cextail);
+ Two_Diff(pc[1], pe[1], cey, ceytail);
+ Two_Diff(pc[2], pe[2], cez, ceztail);
+ Two_Diff(pd[0], pe[0], dex, dextail);
+ Two_Diff(pd[1], pe[1], dey, deytail);
+ Two_Diff(pd[2], pe[2], dez, deztail);
+
+ Two_Two_Product(aex, aextail, bey, beytail,
+ axby7, axby[6], axby[5], axby[4],
+ axby[3], axby[2], axby[1], axby[0]);
+ axby[7] = axby7;
+ negate = -aey;
+ negatetail = -aeytail;
+ Two_Two_Product(bex, bextail, negate, negatetail,
+ bxay7, bxay[6], bxay[5], bxay[4],
+ bxay[3], bxay[2], bxay[1], bxay[0]);
+ bxay[7] = bxay7;
+ ablen = fast_expansion_sum_zeroelim(8, axby, 8, bxay, ab);
+ Two_Two_Product(bex, bextail, cey, ceytail,
+ bxcy7, bxcy[6], bxcy[5], bxcy[4],
+ bxcy[3], bxcy[2], bxcy[1], bxcy[0]);
+ bxcy[7] = bxcy7;
+ negate = -bey;
+ negatetail = -beytail;
+ Two_Two_Product(cex, cextail, negate, negatetail,
+ cxby7, cxby[6], cxby[5], cxby[4],
+ cxby[3], cxby[2], cxby[1], cxby[0]);
+ cxby[7] = cxby7;
+ bclen = fast_expansion_sum_zeroelim(8, bxcy, 8, cxby, bc);
+ Two_Two_Product(cex, cextail, dey, deytail,
+ cxdy7, cxdy[6], cxdy[5], cxdy[4],
+ cxdy[3], cxdy[2], cxdy[1], cxdy[0]);
+ cxdy[7] = cxdy7;
+ negate = -cey;
+ negatetail = -ceytail;
+ Two_Two_Product(dex, dextail, negate, negatetail,
+ dxcy7, dxcy[6], dxcy[5], dxcy[4],
+ dxcy[3], dxcy[2], dxcy[1], dxcy[0]);
+ dxcy[7] = dxcy7;
+ cdlen = fast_expansion_sum_zeroelim(8, cxdy, 8, dxcy, cd);
+ Two_Two_Product(dex, dextail, aey, aeytail,
+ dxay7, dxay[6], dxay[5], dxay[4],
+ dxay[3], dxay[2], dxay[1], dxay[0]);
+ dxay[7] = dxay7;
+ negate = -dey;
+ negatetail = -deytail;
+ Two_Two_Product(aex, aextail, negate, negatetail,
+ axdy7, axdy[6], axdy[5], axdy[4],
+ axdy[3], axdy[2], axdy[1], axdy[0]);
+ axdy[7] = axdy7;
+ dalen = fast_expansion_sum_zeroelim(8, dxay, 8, axdy, da);
+ Two_Two_Product(aex, aextail, cey, ceytail,
+ axcy7, axcy[6], axcy[5], axcy[4],
+ axcy[3], axcy[2], axcy[1], axcy[0]);
+ axcy[7] = axcy7;
+ negate = -aey;
+ negatetail = -aeytail;
+ Two_Two_Product(cex, cextail, negate, negatetail,
+ cxay7, cxay[6], cxay[5], cxay[4],
+ cxay[3], cxay[2], cxay[1], cxay[0]);
+ cxay[7] = cxay7;
+ aclen = fast_expansion_sum_zeroelim(8, axcy, 8, cxay, ac);
+ Two_Two_Product(bex, bextail, dey, deytail,
+ bxdy7, bxdy[6], bxdy[5], bxdy[4],
+ bxdy[3], bxdy[2], bxdy[1], bxdy[0]);
+ bxdy[7] = bxdy7;
+ negate = -bey;
+ negatetail = -beytail;
+ Two_Two_Product(dex, dextail, negate, negatetail,
+ dxby7, dxby[6], dxby[5], dxby[4],
+ dxby[3], dxby[2], dxby[1], dxby[0]);
+ dxby[7] = dxby7;
+ bdlen = fast_expansion_sum_zeroelim(8, bxdy, 8, dxby, bd);
+
+ temp32alen = scale_expansion_zeroelim(cdlen, cd, -bez, temp32a);
+ temp32blen = scale_expansion_zeroelim(cdlen, cd, -beztail, temp32b);
+ temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64a);
+ temp32alen = scale_expansion_zeroelim(bdlen, bd, cez, temp32a);
+ temp32blen = scale_expansion_zeroelim(bdlen, bd, ceztail, temp32b);
+ temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64b);
+ temp32alen = scale_expansion_zeroelim(bclen, bc, -dez, temp32a);
+ temp32blen = scale_expansion_zeroelim(bclen, bc, -deztail, temp32b);
+ temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64c);
+ temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
+ temp64blen, temp64b, temp128);
+ temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
+ temp128len, temp128, temp192);
+ xlen = scale_expansion_zeroelim(temp192len, temp192, aex, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, aex, detxx);
+ xtlen = scale_expansion_zeroelim(temp192len, temp192, aextail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, aex, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, aextail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+ ylen = scale_expansion_zeroelim(temp192len, temp192, aey, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, aey, detyy);
+ ytlen = scale_expansion_zeroelim(temp192len, temp192, aeytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, aey, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, aeytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+ zlen = scale_expansion_zeroelim(temp192len, temp192, aez, detz);
+ zzlen = scale_expansion_zeroelim(zlen, detz, aez, detzz);
+ ztlen = scale_expansion_zeroelim(temp192len, temp192, aeztail, detzt);
+ zztlen = scale_expansion_zeroelim(ztlen, detzt, aez, detzzt);
+ for (i = 0; i < zztlen; i++) {
+ detzzt[i] *= 2.0;
+ }
+ ztztlen = scale_expansion_zeroelim(ztlen, detzt, aeztail, detztzt);
+ z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
+ z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
+ xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
+ alen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, adet);
+
+ temp32alen = scale_expansion_zeroelim(dalen, da, cez, temp32a);
+ temp32blen = scale_expansion_zeroelim(dalen, da, ceztail, temp32b);
+ temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64a);
+ temp32alen = scale_expansion_zeroelim(aclen, ac, dez, temp32a);
+ temp32blen = scale_expansion_zeroelim(aclen, ac, deztail, temp32b);
+ temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64b);
+ temp32alen = scale_expansion_zeroelim(cdlen, cd, aez, temp32a);
+ temp32blen = scale_expansion_zeroelim(cdlen, cd, aeztail, temp32b);
+ temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64c);
+ temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
+ temp64blen, temp64b, temp128);
+ temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
+ temp128len, temp128, temp192);
+ xlen = scale_expansion_zeroelim(temp192len, temp192, bex, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, bex, detxx);
+ xtlen = scale_expansion_zeroelim(temp192len, temp192, bextail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, bex, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, bextail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+ ylen = scale_expansion_zeroelim(temp192len, temp192, bey, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, bey, detyy);
+ ytlen = scale_expansion_zeroelim(temp192len, temp192, beytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, bey, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, beytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+ zlen = scale_expansion_zeroelim(temp192len, temp192, bez, detz);
+ zzlen = scale_expansion_zeroelim(zlen, detz, bez, detzz);
+ ztlen = scale_expansion_zeroelim(temp192len, temp192, beztail, detzt);
+ zztlen = scale_expansion_zeroelim(ztlen, detzt, bez, detzzt);
+ for (i = 0; i < zztlen; i++) {
+ detzzt[i] *= 2.0;
+ }
+ ztztlen = scale_expansion_zeroelim(ztlen, detzt, beztail, detztzt);
+ z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
+ z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
+ xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
+ blen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, bdet);
+
+ temp32alen = scale_expansion_zeroelim(ablen, ab, -dez, temp32a);
+ temp32blen = scale_expansion_zeroelim(ablen, ab, -deztail, temp32b);
+ temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64a);
+ temp32alen = scale_expansion_zeroelim(bdlen, bd, -aez, temp32a);
+ temp32blen = scale_expansion_zeroelim(bdlen, bd, -aeztail, temp32b);
+ temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64b);
+ temp32alen = scale_expansion_zeroelim(dalen, da, -bez, temp32a);
+ temp32blen = scale_expansion_zeroelim(dalen, da, -beztail, temp32b);
+ temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64c);
+ temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
+ temp64blen, temp64b, temp128);
+ temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
+ temp128len, temp128, temp192);
+ xlen = scale_expansion_zeroelim(temp192len, temp192, cex, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, cex, detxx);
+ xtlen = scale_expansion_zeroelim(temp192len, temp192, cextail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, cex, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, cextail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+ ylen = scale_expansion_zeroelim(temp192len, temp192, cey, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, cey, detyy);
+ ytlen = scale_expansion_zeroelim(temp192len, temp192, ceytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, cey, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, ceytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+ zlen = scale_expansion_zeroelim(temp192len, temp192, cez, detz);
+ zzlen = scale_expansion_zeroelim(zlen, detz, cez, detzz);
+ ztlen = scale_expansion_zeroelim(temp192len, temp192, ceztail, detzt);
+ zztlen = scale_expansion_zeroelim(ztlen, detzt, cez, detzzt);
+ for (i = 0; i < zztlen; i++) {
+ detzzt[i] *= 2.0;
+ }
+ ztztlen = scale_expansion_zeroelim(ztlen, detzt, ceztail, detztzt);
+ z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
+ z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
+ xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
+ clen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, cdet);
+
+ temp32alen = scale_expansion_zeroelim(bclen, bc, aez, temp32a);
+ temp32blen = scale_expansion_zeroelim(bclen, bc, aeztail, temp32b);
+ temp64alen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64a);
+ temp32alen = scale_expansion_zeroelim(aclen, ac, -bez, temp32a);
+ temp32blen = scale_expansion_zeroelim(aclen, ac, -beztail, temp32b);
+ temp64blen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64b);
+ temp32alen = scale_expansion_zeroelim(ablen, ab, cez, temp32a);
+ temp32blen = scale_expansion_zeroelim(ablen, ab, ceztail, temp32b);
+ temp64clen = fast_expansion_sum_zeroelim(temp32alen, temp32a,
+ temp32blen, temp32b, temp64c);
+ temp128len = fast_expansion_sum_zeroelim(temp64alen, temp64a,
+ temp64blen, temp64b, temp128);
+ temp192len = fast_expansion_sum_zeroelim(temp64clen, temp64c,
+ temp128len, temp128, temp192);
+ xlen = scale_expansion_zeroelim(temp192len, temp192, dex, detx);
+ xxlen = scale_expansion_zeroelim(xlen, detx, dex, detxx);
+ xtlen = scale_expansion_zeroelim(temp192len, temp192, dextail, detxt);
+ xxtlen = scale_expansion_zeroelim(xtlen, detxt, dex, detxxt);
+ for (i = 0; i < xxtlen; i++) {
+ detxxt[i] *= 2.0;
+ }
+ xtxtlen = scale_expansion_zeroelim(xtlen, detxt, dextail, detxtxt);
+ x1len = fast_expansion_sum_zeroelim(xxlen, detxx, xxtlen, detxxt, x1);
+ x2len = fast_expansion_sum_zeroelim(x1len, x1, xtxtlen, detxtxt, x2);
+ ylen = scale_expansion_zeroelim(temp192len, temp192, dey, dety);
+ yylen = scale_expansion_zeroelim(ylen, dety, dey, detyy);
+ ytlen = scale_expansion_zeroelim(temp192len, temp192, deytail, detyt);
+ yytlen = scale_expansion_zeroelim(ytlen, detyt, dey, detyyt);
+ for (i = 0; i < yytlen; i++) {
+ detyyt[i] *= 2.0;
+ }
+ ytytlen = scale_expansion_zeroelim(ytlen, detyt, deytail, detytyt);
+ y1len = fast_expansion_sum_zeroelim(yylen, detyy, yytlen, detyyt, y1);
+ y2len = fast_expansion_sum_zeroelim(y1len, y1, ytytlen, detytyt, y2);
+ zlen = scale_expansion_zeroelim(temp192len, temp192, dez, detz);
+ zzlen = scale_expansion_zeroelim(zlen, detz, dez, detzz);
+ ztlen = scale_expansion_zeroelim(temp192len, temp192, deztail, detzt);
+ zztlen = scale_expansion_zeroelim(ztlen, detzt, dez, detzzt);
+ for (i = 0; i < zztlen; i++) {
+ detzzt[i] *= 2.0;
+ }
+ ztztlen = scale_expansion_zeroelim(ztlen, detzt, deztail, detztzt);
+ z1len = fast_expansion_sum_zeroelim(zzlen, detzz, zztlen, detzzt, z1);
+ z2len = fast_expansion_sum_zeroelim(z1len, z1, ztztlen, detztzt, z2);
+ xylen = fast_expansion_sum_zeroelim(x2len, x2, y2len, y2, detxy);
+ dlen = fast_expansion_sum_zeroelim(z2len, z2, xylen, detxy, ddet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
+ deterlen = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, deter);
+
+ return deter[deterlen - 1];
+}
+
+REAL insphereadapt(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe,
+ REAL permanent)
+{
+ INEXACT REAL aex, bex, cex, dex, aey, bey, cey, dey, aez, bez, cez, dez;
+ REAL det, errbound;
+
+ INEXACT REAL aexbey1, bexaey1, bexcey1, cexbey1;
+ INEXACT REAL cexdey1, dexcey1, dexaey1, aexdey1;
+ INEXACT REAL aexcey1, cexaey1, bexdey1, dexbey1;
+ REAL aexbey0, bexaey0, bexcey0, cexbey0;
+ REAL cexdey0, dexcey0, dexaey0, aexdey0;
+ REAL aexcey0, cexaey0, bexdey0, dexbey0;
+ REAL ab[4], bc[4], cd[4], da[4], ac[4], bd[4];
+ INEXACT REAL ab3, bc3, cd3, da3, ac3, bd3;
+ REAL abeps, bceps, cdeps, daeps, aceps, bdeps;
+ REAL temp8a[8], temp8b[8], temp8c[8], temp16[16], temp24[24], temp48[48];
+ int temp8alen, temp8blen, temp8clen, temp16len, temp24len, temp48len;
+ REAL xdet[96], ydet[96], zdet[96], xydet[192];
+ int xlen, ylen, zlen, xylen;
+ REAL adet[288], bdet[288], cdet[288], ddet[288];
+ int alen, blen, clen, dlen;
+ REAL abdet[576], cddet[576];
+ int ablen, cdlen;
+ REAL fin1[1152];
+ int finlength;
+
+ REAL aextail, bextail, cextail, dextail;
+ REAL aeytail, beytail, ceytail, deytail;
+ REAL aeztail, beztail, ceztail, deztail;
+
+ INEXACT REAL bvirt;
+ REAL avirt, bround, around;
+ INEXACT REAL c;
+ INEXACT REAL abig;
+ REAL ahi, alo, bhi, blo;
+ REAL err1, err2, err3;
+ INEXACT REAL _i, _j;
+ REAL _0;
+
+ aex = (REAL) (pa[0] - pe[0]);
+ bex = (REAL) (pb[0] - pe[0]);
+ cex = (REAL) (pc[0] - pe[0]);
+ dex = (REAL) (pd[0] - pe[0]);
+ aey = (REAL) (pa[1] - pe[1]);
+ bey = (REAL) (pb[1] - pe[1]);
+ cey = (REAL) (pc[1] - pe[1]);
+ dey = (REAL) (pd[1] - pe[1]);
+ aez = (REAL) (pa[2] - pe[2]);
+ bez = (REAL) (pb[2] - pe[2]);
+ cez = (REAL) (pc[2] - pe[2]);
+ dez = (REAL) (pd[2] - pe[2]);
+
+ Two_Product(aex, bey, aexbey1, aexbey0);
+ Two_Product(bex, aey, bexaey1, bexaey0);
+ Two_Two_Diff(aexbey1, aexbey0, bexaey1, bexaey0, ab3, ab[2], ab[1], ab[0]);
+ ab[3] = ab3;
+
+ Two_Product(bex, cey, bexcey1, bexcey0);
+ Two_Product(cex, bey, cexbey1, cexbey0);
+ Two_Two_Diff(bexcey1, bexcey0, cexbey1, cexbey0, bc3, bc[2], bc[1], bc[0]);
+ bc[3] = bc3;
+
+ Two_Product(cex, dey, cexdey1, cexdey0);
+ Two_Product(dex, cey, dexcey1, dexcey0);
+ Two_Two_Diff(cexdey1, cexdey0, dexcey1, dexcey0, cd3, cd[2], cd[1], cd[0]);
+ cd[3] = cd3;
+
+ Two_Product(dex, aey, dexaey1, dexaey0);
+ Two_Product(aex, dey, aexdey1, aexdey0);
+ Two_Two_Diff(dexaey1, dexaey0, aexdey1, aexdey0, da3, da[2], da[1], da[0]);
+ da[3] = da3;
+
+ Two_Product(aex, cey, aexcey1, aexcey0);
+ Two_Product(cex, aey, cexaey1, cexaey0);
+ Two_Two_Diff(aexcey1, aexcey0, cexaey1, cexaey0, ac3, ac[2], ac[1], ac[0]);
+ ac[3] = ac3;
+
+ Two_Product(bex, dey, bexdey1, bexdey0);
+ Two_Product(dex, bey, dexbey1, dexbey0);
+ Two_Two_Diff(bexdey1, bexdey0, dexbey1, dexbey0, bd3, bd[2], bd[1], bd[0]);
+ bd[3] = bd3;
+
+ temp8alen = scale_expansion_zeroelim(4, cd, bez, temp8a);
+ temp8blen = scale_expansion_zeroelim(4, bd, -cez, temp8b);
+ temp8clen = scale_expansion_zeroelim(4, bc, dez, temp8c);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
+ temp8blen, temp8b, temp16);
+ temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
+ temp16len, temp16, temp24);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, aex, temp48);
+ xlen = scale_expansion_zeroelim(temp48len, temp48, -aex, xdet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, aey, temp48);
+ ylen = scale_expansion_zeroelim(temp48len, temp48, -aey, ydet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, aez, temp48);
+ zlen = scale_expansion_zeroelim(temp48len, temp48, -aez, zdet);
+ xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
+ alen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, adet);
+
+ temp8alen = scale_expansion_zeroelim(4, da, cez, temp8a);
+ temp8blen = scale_expansion_zeroelim(4, ac, dez, temp8b);
+ temp8clen = scale_expansion_zeroelim(4, cd, aez, temp8c);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
+ temp8blen, temp8b, temp16);
+ temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
+ temp16len, temp16, temp24);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, bex, temp48);
+ xlen = scale_expansion_zeroelim(temp48len, temp48, bex, xdet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, bey, temp48);
+ ylen = scale_expansion_zeroelim(temp48len, temp48, bey, ydet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, bez, temp48);
+ zlen = scale_expansion_zeroelim(temp48len, temp48, bez, zdet);
+ xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
+ blen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, bdet);
+
+ temp8alen = scale_expansion_zeroelim(4, ab, dez, temp8a);
+ temp8blen = scale_expansion_zeroelim(4, bd, aez, temp8b);
+ temp8clen = scale_expansion_zeroelim(4, da, bez, temp8c);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
+ temp8blen, temp8b, temp16);
+ temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
+ temp16len, temp16, temp24);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, cex, temp48);
+ xlen = scale_expansion_zeroelim(temp48len, temp48, -cex, xdet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, cey, temp48);
+ ylen = scale_expansion_zeroelim(temp48len, temp48, -cey, ydet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, cez, temp48);
+ zlen = scale_expansion_zeroelim(temp48len, temp48, -cez, zdet);
+ xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
+ clen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, cdet);
+
+ temp8alen = scale_expansion_zeroelim(4, bc, aez, temp8a);
+ temp8blen = scale_expansion_zeroelim(4, ac, -bez, temp8b);
+ temp8clen = scale_expansion_zeroelim(4, ab, cez, temp8c);
+ temp16len = fast_expansion_sum_zeroelim(temp8alen, temp8a,
+ temp8blen, temp8b, temp16);
+ temp24len = fast_expansion_sum_zeroelim(temp8clen, temp8c,
+ temp16len, temp16, temp24);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, dex, temp48);
+ xlen = scale_expansion_zeroelim(temp48len, temp48, dex, xdet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, dey, temp48);
+ ylen = scale_expansion_zeroelim(temp48len, temp48, dey, ydet);
+ temp48len = scale_expansion_zeroelim(temp24len, temp24, dez, temp48);
+ zlen = scale_expansion_zeroelim(temp48len, temp48, dez, zdet);
+ xylen = fast_expansion_sum_zeroelim(xlen, xdet, ylen, ydet, xydet);
+ dlen = fast_expansion_sum_zeroelim(xylen, xydet, zlen, zdet, ddet);
+
+ ablen = fast_expansion_sum_zeroelim(alen, adet, blen, bdet, abdet);
+ cdlen = fast_expansion_sum_zeroelim(clen, cdet, dlen, ddet, cddet);
+ finlength = fast_expansion_sum_zeroelim(ablen, abdet, cdlen, cddet, fin1);
+
+ det = estimate(finlength, fin1);
+ errbound = isperrboundB * permanent;
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ Two_Diff_Tail(pa[0], pe[0], aex, aextail);
+ Two_Diff_Tail(pa[1], pe[1], aey, aeytail);
+ Two_Diff_Tail(pa[2], pe[2], aez, aeztail);
+ Two_Diff_Tail(pb[0], pe[0], bex, bextail);
+ Two_Diff_Tail(pb[1], pe[1], bey, beytail);
+ Two_Diff_Tail(pb[2], pe[2], bez, beztail);
+ Two_Diff_Tail(pc[0], pe[0], cex, cextail);
+ Two_Diff_Tail(pc[1], pe[1], cey, ceytail);
+ Two_Diff_Tail(pc[2], pe[2], cez, ceztail);
+ Two_Diff_Tail(pd[0], pe[0], dex, dextail);
+ Two_Diff_Tail(pd[1], pe[1], dey, deytail);
+ Two_Diff_Tail(pd[2], pe[2], dez, deztail);
+ if ((aextail == 0.0) && (aeytail == 0.0) && (aeztail == 0.0)
+ && (bextail == 0.0) && (beytail == 0.0) && (beztail == 0.0)
+ && (cextail == 0.0) && (ceytail == 0.0) && (ceztail == 0.0)
+ && (dextail == 0.0) && (deytail == 0.0) && (deztail == 0.0)) {
+ return det;
+ }
+
+ errbound = isperrboundC * permanent + resulterrbound * Absolute(det);
+ abeps = (aex * beytail + bey * aextail)
+ - (aey * bextail + bex * aeytail);
+ bceps = (bex * ceytail + cey * bextail)
+ - (bey * cextail + cex * beytail);
+ cdeps = (cex * deytail + dey * cextail)
+ - (cey * dextail + dex * ceytail);
+ daeps = (dex * aeytail + aey * dextail)
+ - (dey * aextail + aex * deytail);
+ aceps = (aex * ceytail + cey * aextail)
+ - (aey * cextail + cex * aeytail);
+ bdeps = (bex * deytail + dey * bextail)
+ - (bey * dextail + dex * beytail);
+ det += (((bex * bex + bey * bey + bez * bez)
+ * ((cez * daeps + dez * aceps + aez * cdeps)
+ + (ceztail * da3 + deztail * ac3 + aeztail * cd3))
+ + (dex * dex + dey * dey + dez * dez)
+ * ((aez * bceps - bez * aceps + cez * abeps)
+ + (aeztail * bc3 - beztail * ac3 + ceztail * ab3)))
+ - ((aex * aex + aey * aey + aez * aez)
+ * ((bez * cdeps - cez * bdeps + dez * bceps)
+ + (beztail * cd3 - ceztail * bd3 + deztail * bc3))
+ + (cex * cex + cey * cey + cez * cez)
+ * ((dez * abeps + aez * bdeps + bez * daeps)
+ + (deztail * ab3 + aeztail * bd3 + beztail * da3))))
+ + 2.0 * (((bex * bextail + bey * beytail + bez * beztail)
+ * (cez * da3 + dez * ac3 + aez * cd3)
+ + (dex * dextail + dey * deytail + dez * deztail)
+ * (aez * bc3 - bez * ac3 + cez * ab3))
+ - ((aex * aextail + aey * aeytail + aez * aeztail)
+ * (bez * cd3 - cez * bd3 + dez * bc3)
+ + (cex * cextail + cey * ceytail + cez * ceztail)
+ * (dez * ab3 + aez * bd3 + bez * da3)));
+ if ((det >= errbound) || (-det >= errbound)) {
+ return det;
+ }
+
+ return insphereexact(pa, pb, pc, pd, pe);
+}
+
+REAL insphere(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe)
+{
+ REAL aex, bex, cex, dex;
+ REAL aey, bey, cey, dey;
+ REAL aez, bez, cez, dez;
+ REAL aexbey, bexaey, bexcey, cexbey, cexdey, dexcey, dexaey, aexdey;
+ REAL aexcey, cexaey, bexdey, dexbey;
+ REAL alift, blift, clift, dlift;
+ REAL ab, bc, cd, da, ac, bd;
+ REAL abc, bcd, cda, dab;
+ REAL aezplus, bezplus, cezplus, dezplus;
+ REAL aexbeyplus, bexaeyplus, bexceyplus, cexbeyplus;
+ REAL cexdeyplus, dexceyplus, dexaeyplus, aexdeyplus;
+ REAL aexceyplus, cexaeyplus, bexdeyplus, dexbeyplus;
+ REAL det;
+ REAL permanent, errbound;
+
+ aex = pa[0] - pe[0];
+ bex = pb[0] - pe[0];
+ cex = pc[0] - pe[0];
+ dex = pd[0] - pe[0];
+ aey = pa[1] - pe[1];
+ bey = pb[1] - pe[1];
+ cey = pc[1] - pe[1];
+ dey = pd[1] - pe[1];
+ aez = pa[2] - pe[2];
+ bez = pb[2] - pe[2];
+ cez = pc[2] - pe[2];
+ dez = pd[2] - pe[2];
+
+ aexbey = aex * bey;
+ bexaey = bex * aey;
+ ab = aexbey - bexaey;
+ bexcey = bex * cey;
+ cexbey = cex * bey;
+ bc = bexcey - cexbey;
+ cexdey = cex * dey;
+ dexcey = dex * cey;
+ cd = cexdey - dexcey;
+ dexaey = dex * aey;
+ aexdey = aex * dey;
+ da = dexaey - aexdey;
+
+ aexcey = aex * cey;
+ cexaey = cex * aey;
+ ac = aexcey - cexaey;
+ bexdey = bex * dey;
+ dexbey = dex * bey;
+ bd = bexdey - dexbey;
+
+ abc = aez * bc - bez * ac + cez * ab;
+ bcd = bez * cd - cez * bd + dez * bc;
+ cda = cez * da + dez * ac + aez * cd;
+ dab = dez * ab + aez * bd + bez * da;
+
+ alift = aex * aex + aey * aey + aez * aez;
+ blift = bex * bex + bey * bey + bez * bez;
+ clift = cex * cex + cey * cey + cez * cez;
+ dlift = dex * dex + dey * dey + dez * dez;
+
+ det = (dlift * abc - clift * dab) + (blift * cda - alift * bcd);
+
+ aezplus = Absolute(aez);
+ bezplus = Absolute(bez);
+ cezplus = Absolute(cez);
+ dezplus = Absolute(dez);
+ aexbeyplus = Absolute(aexbey);
+ bexaeyplus = Absolute(bexaey);
+ bexceyplus = Absolute(bexcey);
+ cexbeyplus = Absolute(cexbey);
+ cexdeyplus = Absolute(cexdey);
+ dexceyplus = Absolute(dexcey);
+ dexaeyplus = Absolute(dexaey);
+ aexdeyplus = Absolute(aexdey);
+ aexceyplus = Absolute(aexcey);
+ cexaeyplus = Absolute(cexaey);
+ bexdeyplus = Absolute(bexdey);
+ dexbeyplus = Absolute(dexbey);
+ permanent = ((cexdeyplus + dexceyplus) * bezplus
+ + (dexbeyplus + bexdeyplus) * cezplus
+ + (bexceyplus + cexbeyplus) * dezplus)
+ * alift
+ + ((dexaeyplus + aexdeyplus) * cezplus
+ + (aexceyplus + cexaeyplus) * dezplus
+ + (cexdeyplus + dexceyplus) * aezplus)
+ * blift
+ + ((aexbeyplus + bexaeyplus) * dezplus
+ + (bexdeyplus + dexbeyplus) * aezplus
+ + (dexaeyplus + aexdeyplus) * bezplus)
+ * clift
+ + ((bexceyplus + cexbeyplus) * aezplus
+ + (cexaeyplus + aexceyplus) * bezplus
+ + (aexbeyplus + bexaeyplus) * cezplus)
+ * dlift;
+ errbound = isperrboundA * permanent;
+ if ((det > errbound) || (-det > errbound)) {
+ return det;
+ }
+
+ return insphereadapt(pa, pb, pc, pd, pe, permanent);
+}
diff --git a/contrib/Tetgen/tetgen.cxx b/contrib/Tetgen/tetgen.cxx
index 34721f2b8356c24cea52ddccfdc96dfa2d06d1ea..13a08e99eaf5190e20f71d5c76d8912f058bfa70 100644
--- a/contrib/Tetgen/tetgen.cxx
+++ b/contrib/Tetgen/tetgen.cxx
@@ -1,22807 +1,25987 @@
-///////////////////////////////////////////////////////////////////////////////
-// //
-// TetGen //
-// //
-// A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator //
-// //
-// Version 1.3 //
-// June 13, 2004 //
-// //
-// Copyright 2002, 2004 //
-// Hang Si //
-// Rathausstr. 9, 10178 Berlin, Germany //
-// si@wias-berlin.de //
-// //
-// You can obtain TetGen via internet: http://tetgen.berlios.de. It may be //
-// freely copied, modified, and redistributed under the copyright notices //
-// given in the file LICENSE. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetgen.cxx //
-// //
-// The C++ implementation file of the TetGen library. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-#include "tetgen.h"
-
-//
-// Begin of class 'tetgenio' implementation
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// initialize() Initialize all variables of 'tetgenio'. //
-// //
-// It is called by the only class constructor 'tetgenio()' implicitly. Thus, //
-// all variables are guaranteed to be initialized. Each array is initialized //
-// to be a 'NULL' pointer, and its length is equal zero. Some variables have //
-// their default value, 'firstnumber' equals zero, 'mesh_dim' equals 3, and //
-// 'numberofcorners' equals 4. Another possible use of this routine is to //
-// call it before to re-use an object. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::initialize()
-{
- firstnumber = 0; // Default item index is numbered from Zero.
- mesh_dim = 3; // Default mesh dimension is 3.
-
- pointlist = (REAL *) NULL;
- pointattributelist = (REAL *) NULL;
- addpointlist = (REAL *) NULL;
- pointmarkerlist = (int *) NULL;
- numberofpoints = 0;
- numberofpointattributes = 0;
- numberofaddpoints = 0;
-
- tetrahedronlist = (int *) NULL;
- tetrahedronattributelist = (REAL *) NULL;
- tetrahedronvolumelist = (REAL *) NULL;
- neighborlist = (int *) NULL;
- numberoftetrahedra = 0;
- numberofcorners = 4; // Default is 4 nodes per element.
- numberoftetrahedronattributes = 0;
-
- trifacelist = (int *) NULL;
- trifacemarkerlist = (int *) NULL;
- numberoftrifaces = 0;
-
- facetlist = (facet *) NULL;
- facetmarkerlist = (int *) NULL;
- numberoffacets = 0;
-
- edgelist = (int *) NULL;
- edgemarkerlist = (int *) NULL;
- numberofedges = 0;
-
- holelist = (REAL *) NULL;
- numberofholes = 0;
-
- regionlist = (REAL *) NULL;
- numberofregions = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// deinitialize() Free the memory allocated in 'tetgenio'. //
-// //
-// It is called by the class destructor '~tetgenio()' implicitly. Hence, the //
-// occupied memory by arrays of an object will be automatically released on //
-// the deletion of the object. However, this routine assumes that the memory //
-// is allocated by C++ memory allocation operator 'new', thus it is freed by //
-// the C++ array deletor 'delete []'. If one uses the C/C++ library function //
-// 'malloc()' to allocate memory for arrays, one has to free them with the //
-// 'free()' function, and call routine 'initialize()' once to disable this //
-// routine on deletion of the object. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::deinitialize()
-{
- if (pointlist != (REAL *) NULL) {
- delete [] pointlist;
- }
- if (pointattributelist != (REAL *) NULL) {
- delete [] pointattributelist;
- }
- if (addpointlist != (REAL *) NULL) {
- delete [] addpointlist;
- }
- if (pointmarkerlist != (int *) NULL) {
- delete [] pointmarkerlist;
- }
-
- if (tetrahedronlist != (int *) NULL) {
- delete [] tetrahedronlist;
- }
- if (tetrahedronattributelist != (REAL *) NULL) {
- delete [] tetrahedronattributelist;
- }
- if (tetrahedronvolumelist != (REAL *) NULL) {
- delete [] tetrahedronvolumelist;
- }
- if (neighborlist != (int *) NULL) {
- delete [] neighborlist;
- }
-
- if (trifacelist != (int *) NULL) {
- delete [] trifacelist;
- }
- if (trifacemarkerlist != (int *) NULL) {
- delete [] trifacemarkerlist;
- }
-
- if (edgelist != (int *) NULL) {
- delete [] edgelist;
- }
- if (edgemarkerlist != (int *) NULL) {
- delete [] edgemarkerlist;
- }
-
- if (facetlist != (facet *) NULL) {
- facet *f;
- polygon *p;
- int i, j;
- for (i = 0; i < numberoffacets; i++) {
- f = &facetlist[i];
- for (j = 0; j < f->numberofpolygons; j++) {
- p = &f->polygonlist[j];
- delete [] p->vertexlist;
- }
- delete [] f->polygonlist;
- if (f->holelist != (REAL *) NULL) {
- delete [] f->holelist;
- }
- }
- delete [] facetlist;
- }
- if (facetmarkerlist != (int *) NULL) {
- delete [] facetmarkerlist;
- }
-
- if (holelist != (REAL *) NULL) {
- delete [] holelist;
- }
-
- if (regionlist != (REAL *) NULL) {
- delete [] regionlist;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_node_call() Load a list of nodes. //
-// //
-// It is a support routine for routines: 'load_nodes()', 'load_poly()', and //
-// 'load_tetmesh()'. 'infile' is the file handle contains the node list. It //
-// may point to a .node, or .poly or .smesh file. 'markers' indicates each //
-// node contains an additional marker (integer) or not. 'infilename' is the //
-// name of the file being read, it is only appeared in error message. //
-// //
-// The 'firstnumber' (0 or 1) is automatically determined by the number of //
-// the first index of the first point. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_node_call(FILE* infile, int markers, char* infilename)
-{
- char inputline[INPUTLINESIZE];
- char *stringptr;
- REAL x, y, z, attrib;
- int firstnode, currentmarker;
- int index, attribindex;
- int i, j;
-
- // Initialize 'pointlist', 'pointattributelist', and 'pointmarkerlist'.
- pointlist = new REAL[numberofpoints * mesh_dim];
- if (pointlist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- if (numberofpointattributes > 0) {
- pointattributelist = new REAL[numberofpoints * numberofpointattributes];
- if (pointattributelist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- if (markers) {
- pointmarkerlist = new int[numberofpoints];
- if (pointmarkerlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
-
- // Read the point section.
- index = 0;
- attribindex = 0;
- for (i = 0; i < numberofpoints; i++) {
- stringptr = readnumberline(inputline, infile, infilename);
- if (i == 0) {
- firstnode = (int) strtol (stringptr, &stringptr, 0);
- if ((firstnode == 0) || (firstnode == 1)) {
- firstnumber = firstnode;
- }
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Point %d has no x coordinate.\n", firstnumber + i);
- break;
- }
- x = (REAL) strtod(stringptr, &stringptr);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Point %d has no y coordinate.\n", firstnumber + i);
- break;
- }
- y = (REAL) strtod(stringptr, &stringptr);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Point %d has no z coordinate.\n", firstnumber + i);
- break;
- }
- z = (REAL) strtod(stringptr, &stringptr);
- pointlist[index++] = x;
- pointlist[index++] = y;
- pointlist[index++] = z;
- // Read the point attributes.
- for (j = 0; j < numberofpointattributes; j++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- attrib = 0.0;
- } else {
- attrib = (REAL) strtod(stringptr, &stringptr);
- }
- pointattributelist[attribindex++] = attrib;
- }
- if (markers) {
- // Read a point marker.
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- currentmarker = 0;
- } else {
- currentmarker = (int) strtol (stringptr, &stringptr, 0);
- }
- pointmarkerlist[i] = currentmarker;
- }
- }
- if (i < numberofpoints) {
- // Failed to read points due to some error.
- delete [] pointlist;
- pointlist = (REAL *) NULL;
- if (markers) {
- delete [] pointmarkerlist;
- pointmarkerlist = (int *) NULL;
- }
- if (numberofpointattributes > 0) {
- delete [] pointattributelist;
- pointattributelist = (REAL *) NULL;
- }
- numberofpoints = 0;
- return false;
- }
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_node() Load a list of nodes from a .node file. //
-// //
-// 'filename' is the inputfile without suffix. The node list is in 'filename.//
-// node'. On completion, the node list is returned in 'pointlist'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_node(char* filename)
-{
- FILE *infile;
- char innodefilename[FILENAMESIZE];
- char inputline[INPUTLINESIZE];
- char *stringptr;
- int markers;
-
- // Assembling the actual file names we want to open.
- strcpy(innodefilename, filename);
- strcat(innodefilename, ".node");
-
- // Try to open a .node file.
- infile = fopen(innodefilename, "r");
- if (infile == (FILE *) NULL) {
- printf("File I/O Error: Cannot access file %s.\n", innodefilename);
- return false;
- }
- printf("Opening %s.\n", innodefilename);
- // Read number of points, number of dimensions, number of point
- // attributes, and number of boundary markers.
- stringptr = readnumberline(inputline, infile, innodefilename);
- numberofpoints = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- mesh_dim = 3;
- } else {
- mesh_dim = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- numberofpointattributes = 0;
- } else {
- numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- markers = 0;
- } else {
- markers = (int) strtol (stringptr, &stringptr, 0);
- }
-
- if (mesh_dim != 3) {
- printf("Error: load_node() only works for 3D points.\n");
- fclose(infile);
- return false;
- }
- if (numberofpoints < 4) {
- printf("File I/O error: There should have at least 4 points.\n");
- fclose(infile);
- return false;
- }
-
- // Load the list of nodes.
- if (!load_node_call(infile, markers, innodefilename)) {
- fclose(infile);
- return false;
- }
- fclose(infile);
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_addnodes() Load a list of additional nodes into 'addpointlists'. //
-// //
-// 'filename' is the filename of the original inputfile without suffix. The //
-// additional nodes are found in file 'filename-a.node'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_addnodes(char* filename)
-{
- FILE *infile;
- char addnodefilename[FILENAMESIZE];
- char inputline[INPUTLINESIZE];
- char *stringptr;
- REAL x, y, z;
- int index;
- int i;
-
- // Additional nodes are saved in file "filename-a.node".
- strcpy(addnodefilename, filename);
- strcat(addnodefilename, "-a.node");
- infile = fopen(addnodefilename, "r");
- if (infile != (FILE *) NULL) {
- printf("Opening %s.\n", addnodefilename);
- } else {
- // Strange! However, it is not a fatal error.
- printf("Warning: Can't opening %s. Skipped.\n", addnodefilename);
- numberofaddpoints = 0;
- return false;
- }
-
- // Read the number of additional points.
- stringptr = readnumberline(inputline, infile, addnodefilename);
- numberofaddpoints = (int) strtol (stringptr, &stringptr, 0);
- if (numberofaddpoints == 0) {
- // It looks this file contains no point.
- fclose(infile);
- return false;
- }
- // Initialize 'addpointlist';
- addpointlist = new REAL[numberofaddpoints * mesh_dim];
- if (addpointlist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
-
- // Read the list of additional points.
- index = 0;
- for (i = 0; i < numberofaddpoints; i++) {
- stringptr = readnumberline(inputline, infile, addnodefilename);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Point %d has no x coordinate.\n", firstnumber + i);
- break;
- }
- x = (REAL) strtod(stringptr, &stringptr);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Point %d has no y coordinate.\n", firstnumber + i);
- break;
- }
- y = (REAL) strtod(stringptr, &stringptr);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Point %d has no z coordinate.\n", firstnumber + i);
- break;
- }
- z = (REAL) strtod(stringptr, &stringptr);
- addpointlist[index++] = x;
- addpointlist[index++] = y;
- addpointlist[index++] = z;
- }
- fclose(infile);
-
- if (i < numberofaddpoints) {
- // Failed to read to additional points due to some error.
- delete [] addpointlist;
- addpointlist = (REAL *) NULL;
- numberofaddpoints = 0;
- return false;
- }
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_poly() Load a piecewise linear complex described in a .poly or //
-// .smesh file. //
-// //
-// 'filename' is the inputfile without suffix. The PLC is in 'filename.poly' //
-// or 'filename.smesh', and possibly plus 'filename.node' (when the first //
-// line of the file starts with a zero). On completion, the PLC is returned //
-// in 'pointlist', 'facetlist', 'holelist' and 'regionlist'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_poly(char* filename)
-{
- FILE *infile, *polyfile;
- char innodefilename[FILENAMESIZE];
- char inpolyfilename[FILENAMESIZE];
- char insmeshfilename[FILENAMESIZE];
- char inputline[INPUTLINESIZE];
- char *stringptr, *infilename;
- int smesh, markers, currentmarker;
- int readnodefile, index;
- int i, j, k;
-
- // Assembling the actual file names we want to open.
- strcpy(innodefilename, filename);
- strcpy(inpolyfilename, filename);
- strcpy(insmeshfilename, filename);
- strcat(innodefilename, ".node");
- strcat(inpolyfilename, ".poly");
- strcat(insmeshfilename, ".smesh");
-
- // First assume it is a .poly file.
- smesh = 0;
- // Try to open a .poly file.
- polyfile = fopen(inpolyfilename, "r");
- if (polyfile == (FILE *) NULL) {
- // .poly doesn't exist! Try to open a .smesh file.
- polyfile = fopen(insmeshfilename, "r");
- if (polyfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot access file %s and %s.\n",
- inpolyfilename, insmeshfilename);
- return false;
- } else {
- printf("Opening %s.\n", insmeshfilename);
- }
- smesh = 1;
- } else {
- printf("Opening %s.\n", inpolyfilename);
- }
- // Read number of points, number of dimensions, number of point
- // attributes, and number of boundary markers.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- numberofpoints = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- mesh_dim = 3; // If it is not provided, set the default value.
- } else {
- mesh_dim = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- numberofpointattributes = 0; // The default value.
- } else {
- numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- markers = 0; // If it is not provided, set the default value.
- } else {
- markers = (int) strtol (stringptr, &stringptr, 0);
- }
- if (numberofpoints > 0) {
- readnodefile = 0;
- if (smesh) {
- infilename = insmeshfilename;
- } else {
- infilename = inpolyfilename;
- }
- infile = polyfile;
- } else {
- // If the .poly or .smesh file claims there are zero points, that
- // means the points should be read from a separate .node file.
- readnodefile = 1;
- infilename = innodefilename;
- }
-
- if (readnodefile) {
- // Read the points from the .node file.
- printf("Opening %s.\n", innodefilename);
- infile = fopen(innodefilename, "r");
- if (infile == (FILE *) NULL) {
- printf("File I/O Error: Cannot access file %s.\n", innodefilename);
- return false;
- }
- // Read number of points, number of dimensions, number of point
- // attributes, and number of boundary markers.
- stringptr = readnumberline(inputline, infile, innodefilename);
- numberofpoints = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- mesh_dim = 3;
- } else {
- mesh_dim = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- numberofpointattributes = 0;
- } else {
- numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- markers = 0;
- } else {
- markers = (int) strtol (stringptr, &stringptr, 0);
- }
- }
-
- if (mesh_dim != 3) {
- printf("Error: load_poly() only works for 3D points.\n");
- fclose(infile);
- return false;
- }
- if (numberofpoints < 4) {
- printf("File I/O error: There should have at least 4 points.\n");
- fclose(infile);
- return false;
- }
-
- // Load the list of nodes.
- if (!load_node_call(infile, markers, infilename)) {
- fclose(infile);
- return false;
- }
-
- if (readnodefile) {
- fclose(infile);
- }
-
- // Read number of facets and number of boundary markers.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- numberoffacets = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- markers = 0;
- } else {
- markers = (int) strtol (stringptr, &stringptr, 0);
- }
-
- if (numberoffacets <= 0) {
- // This input file is trivial, return anyway.
- fclose(polyfile);
- return true;
- }
-
- // Initialize the 'facetlist', 'facetmarkerlist'.
- facetlist = new facet[numberoffacets];
- if (markers == 1) {
- facetmarkerlist = new int[numberoffacets];
- }
-
- facet *f;
- polygon *p;
-
- // Read data into 'facetlist', 'facetmarkerlist'.
- if (smesh == 0) {
- // Facets are in .poly file format.
- for (i = 1; i <= numberoffacets; i++) {
- f = &(facetlist[i - 1]);
- init(f);
- f->numberofholes = 0;
- currentmarker = 0;
- // Read number of polygons, number of holes, and a boundary marker.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- f->numberofpolygons = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr != '\0') {
- f->numberofholes = (int) strtol (stringptr, &stringptr, 0);
- if (markers == 1) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr != '\0') {
- currentmarker = (int) strtol(stringptr, &stringptr, 0);
- }
- }
- }
- // Initialize facetmarker if it needs.
- if (markers == 1) {
- facetmarkerlist[i - 1] = currentmarker;
- }
- // Each facet should has at least one polygon.
- if (f->numberofpolygons <= 0) {
- printf("Error: Wrong number of polygon in %d facet.\n", i);
- break;
- }
- // Initialize the 'f->polygonlist'.
- f->polygonlist = new polygon[f->numberofpolygons];
- // Go through all polygons, read in their vertices.
- for (j = 1; j <= f->numberofpolygons; j++) {
- p = &(f->polygonlist[j - 1]);
- init(p);
- // Read number of vertices of this polygon.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- p->numberofvertices = (int) strtol(stringptr, &stringptr, 0);
- if (p->numberofvertices < 1) {
- printf("Error: Wrong polygon %d in facet %d\n", j, i);
- break;
- }
- // Initialize 'p->vertexlist'.
- p->vertexlist = new int[p->numberofvertices];
- // Read all vertices of this polygon.
- for (k = 1; k <= p->numberofvertices; k++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- // Try to load another non-empty line and continue to read the
- // rest of vertices.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- if (*stringptr == '\0') {
- printf("Error: Missing %d endpoints of polygon %d in facet %d",
- p->numberofvertices - k, j, i);
- break;
- }
- }
- p->vertexlist[k - 1] = (int) strtol (stringptr, &stringptr, 0);
- }
- }
- if (j <= f->numberofpolygons) {
- // This must be caused by an error. However, there're j - 1 polygons
- // have been read. Reset the 'f->numberofpolygon'.
- if (j == 1) {
- // This is the first polygon.
- delete [] f->polygonlist;
- }
- f->numberofpolygons = j - 1;
- // No hole will be read even it exists.
- f->numberofholes = 0;
- break;
- }
- // If this facet has holes pints defined, read them.
- if (f->numberofholes > 0) {
- // Initialize 'f->holelist'.
- f->holelist = new REAL[f->numberofholes * 3];
- // Read the holes' coordinates.
- index = 0;
- for (j = 1; j <= f->numberofholes; j++) {
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- for (k = 1; k <= 3; k++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Hole %d in facet %d has no coordinates", j, i);
- break;
- }
- f->holelist[index++] = (REAL) strtod (stringptr, &stringptr);
- }
- if (k <= 3) {
- // This must be caused by an error.
- break;
- }
- }
- if (j <= f->numberofholes) {
- // This must be caused by an error.
- break;
- }
- }
- }
- if (i <= numberoffacets) {
- // This must be caused by an error.
- numberoffacets = i - 1;
- fclose(polyfile);
- return false;
- }
- } else { // poly == 0
- // Read the facets from a .smesh file.
- for (i = 1; i <= numberoffacets; i++) {
- f = &(facetlist[i - 1]);
- init(f);
- // Initialize 'f->facetlist'. In a .smesh file, each facetlist only
- // contains exactly one polygon, no hole.
- f->numberofpolygons = 1;
- f->polygonlist = new polygon[f->numberofpolygons];
- p = &(f->polygonlist[0]);
- init(p);
- // Read number of vertices of this polygon.
- stringptr = readnumberline(inputline, polyfile, insmeshfilename);
- p->numberofvertices = (int) strtol (stringptr, &stringptr, 0);
- if (p->numberofvertices < 1) {
- printf("Error: Wrong number of vertex in facet %d\n", i);
- break;
- }
- // Initialize 'p->vertexlist'.
- p->vertexlist = new int[p->numberofvertices];
- for (k = 1; k <= p->numberofvertices; k++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- // Try to load another non-empty line and continue to read the
- // rest of vertices.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- if (*stringptr == '\0') {
- printf("Error: Missing %d endpoints in facet %d",
- p->numberofvertices - k, i);
- break;
- }
- }
- p->vertexlist[k - 1] = (int) strtol (stringptr, &stringptr, 0);
- }
- if (k <= p->numberofvertices) {
- // This must be caused by an error.
- break;
- }
- // Read facet's boundary marker at last.
- if (markers == 1) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- currentmarker = 0;
- } else {
- currentmarker = (int) strtol(stringptr, &stringptr, 0);
- }
- facetmarkerlist[i - 1] = currentmarker;
- }
- }
- if (i <= numberoffacets) {
- // This must be caused by an error.
- numberoffacets = i - 1;
- fclose(polyfile);
- return false;
- }
- }
-
- // Read the hole section.
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- if (*stringptr != '\0') {
- numberofholes = (int) strtol (stringptr, &stringptr, 0);
- } else {
- numberofholes = 0;
- }
- if (numberofholes > 0) {
- // Initialize 'holelist'.
- holelist = new REAL[numberofholes * 3];
- for (i = 0; i < 3 * numberofholes; i += 3) {
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Hole %d has no x coord.\n", firstnumber + (i / 3));
- break;
- } else {
- holelist[i] = (REAL) strtod(stringptr, &stringptr);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Hole %d has no y coord.\n", firstnumber + (i / 3));
- break;
- } else {
- holelist[i + 1] = (REAL) strtod(stringptr, &stringptr);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Hole %d has no z coord.\n", firstnumber + (i / 3));
- break;
- } else {
- holelist[i + 2] = (REAL) strtod(stringptr, &stringptr);
- }
- }
- if (i < 3 * numberofholes) {
- // This must be caused by an error.
- fclose(polyfile);
- return false;
- }
- }
-
- // Read the region section. The 'region' section is optional, if we don't
- // reach the end of the file, try read it in.
- do {
- stringptr = fgets(inputline, INPUTLINESIZE, polyfile);
- if (stringptr == (char *) NULL) {
- break;
- }
- // Skip anything that doesn't look like a number, a comment,
- // or the end of a line.
- while ((*stringptr != '\0') && (*stringptr != '#')
- && (*stringptr != '.') && (*stringptr != '+') && (*stringptr != '-')
- && ((*stringptr < '0') || (*stringptr > '9'))) {
- stringptr++;
- }
- // If it's a comment or end of line, read another line and try again.
- } while ((*stringptr == '#') || (*stringptr == '\0'));
-
- if (stringptr != (char *) NULL && *stringptr != '\0') {
- numberofregions = (int) strtol (stringptr, &stringptr, 0);
- } else {
- numberofregions = 0;
- }
- if (numberofregions > 0) {
- // Initialize 'regionlist'.
- regionlist = new REAL[numberofregions * 5];
- index = 0;
- for (i = 0; i < numberofregions; i++) {
- stringptr = readnumberline(inputline, polyfile, inpolyfilename);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Region %d has no x coordinate.\n", firstnumber + i);
- break;
- } else {
- regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Region %d has no y coordinate.\n", firstnumber + i);
- break;
- } else {
- regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Region %d has no z coordinate.\n", firstnumber + i);
- break;
- } else {
- regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Region %d has no region attrib.\n", firstnumber + i);
- break;
- } else {
- regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- regionlist[index] = regionlist[index - 1];
- } else {
- regionlist[index] = (REAL) strtod(stringptr, &stringptr);
- }
- index++;
- }
- if (i < numberofregions) {
- // This must be caused by an error.
- fclose(polyfile);
- return false;
- }
- }
-
- // End of reading poly/smesh file.
- fclose(polyfile);
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_off() Load a polyhedron described in a .off file. //
-// //
-// The .off format is one of file formats of the Geomview, an interactive //
-// program for viewing and manipulating geometric objects. More information //
-// is available form: http://www.geomview.org. //
-// //
-// 'filename' is a input filename with extension .off or without extension ( //
-// the .off will be added in this case). On completion, the polyhedron is //
-// returned in 'pointlist' and 'facetlist'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_off(char* filename)
-{
- FILE *fp;
- tetgenio::facet *f;
- tetgenio::polygon *p;
- char infilename[FILENAMESIZE];
- char buffer[INPUTLINESIZE];
- char *bufferp;
- double *coord;
- int nverts = 0, iverts = 0;
- int nfaces = 0, ifaces = 0;
- int nedges = 0;
- int line_count = 0, i;
-
- strncpy(infilename, filename, 1024 - 1);
- infilename[FILENAMESIZE - 1] = '\0';
- if (infilename[0] == '\0') {
- printf("Error: No filename.\n");
- return false;
- }
- if (strcmp(&infilename[strlen(infilename) - 4], ".off") != 0) {
- strcat(infilename, ".off");
- }
-
- if (!(fp = fopen(infilename, "r"))) {
- printf("File I/O Error: Unable to open file %s\n", infilename);
- return false;
- }
- printf("Opening %s.\n", infilename);
-
- // OFF requires the index starts from '0'.
- firstnumber = 0;
-
- while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
- // Check section
- if (nverts == 0) {
- // Read header
- bufferp = strstr(bufferp, "OFF");
- if (bufferp != NULL) {
- // Read mesh counts
- bufferp = findnextnumber(bufferp); // Skip field "OFF".
- if (*bufferp == '\0') {
- // Read a non-empty line.
- bufferp = readline(buffer, fp, &line_count);
- }
- if ((sscanf(bufferp, "%d%d%d", &nverts, &nfaces, &nedges) != 3)
- || (nverts == 0)) {
- printf("Syntax error reading header on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- // Allocate memory for 'tetgenio'
- if (nverts > 0) {
- numberofpoints = nverts;
- pointlist = new REAL[nverts * 3];
- assert(pointlist != NULL);
- }
- if (nfaces > 0) {
- numberoffacets = nfaces;
- facetlist = new tetgenio::facet[nfaces];
- assert(facetlist);
- }
- }
- } else if (iverts < nverts) {
- // Read vertex coordinates
- coord = &pointlist[iverts * 3];
- for (i = 0; i < 3; i++) {
- if (*bufferp == '\0') {
- printf("Syntax error reading vertex coords on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- coord[i] = (REAL) strtod(bufferp, &bufferp);
- bufferp = findnextnumber(bufferp);
- }
- iverts++;
- } else if (ifaces < nfaces) {
- // Get next face
- f = &facetlist[ifaces];
- init(f);
- // In .off format, each facet has one polygon, no hole.
- f->numberofpolygons = 1;
- f->polygonlist = new tetgenio::polygon[1];
- p = &f->polygonlist[0];
- init(p);
- // Read the number of vertices, it should be greater than 0.
- p->numberofvertices = (int) strtol(bufferp, &bufferp, 0);
- if (p->numberofvertices == 0) {
- printf("Syntax error reading polygon on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- // Allocate memory for face vertices
- p->vertexlist = new int[p->numberofvertices];
- for (i = 0; i < p->numberofvertices; i++) {
- bufferp = findnextnumber(bufferp);
- if (*bufferp == '\0') {
- printf("Syntax error reading polygon on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- p->vertexlist[i] = (int) strtol(bufferp, &bufferp, 0);
- }
- ifaces++;
- } else {
- // Should never get here
- printf("Found extra text starting at line %d in file %s\n", line_count,
- infilename);
- break;
- }
- }
-
- // Close file
- fclose(fp);
-
- // Check whether read all points
- if (iverts != nverts) {
- printf("Expected %d vertices, but read only %d vertices in file %s\n",
- nverts, iverts, infilename);
- return false;
- }
-
- // Check whether read all faces
- if (ifaces != nfaces) {
- printf("Expected %d faces, but read only %d faces in file %s\n",
- nfaces, ifaces, infilename);
- return false;
- }
-
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_ply() Load a polyhedron described in a .ply file. //
-// //
-// 'filename' is the file name with extension .ply or without extension (the //
-// .ply will be added in this case). //
-// //
-// This is a simplified version of reading .ply files, which only reads the //
-// set of vertices and the set of faces. Other informations (such as color, //
-// material, texture, etc) in .ply file are ignored. Complete routines for //
-// reading and writing ,ply files are available from: http://www.cc.gatech. //
-// edu/projects/large_models/ply.html. Except the header section, ply file //
-// format has exactly the same format for listing vertices and polygons as //
-// off file format. //
-// //
-// On completion, 'pointlist' and 'facetlist' together return the polyhedron.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_ply(char* filename)
-{
- FILE *fp;
- tetgenio::facet *f;
- tetgenio::polygon *p;
- char infilename[FILENAMESIZE];
- char buffer[INPUTLINESIZE];
- char *bufferp, *str;
- double *coord;
- int endheader = 0, format = 0;
- int nverts = 0, iverts = 0;
- int nfaces = 0, ifaces = 0;
- int line_count = 0, i;
-
- strncpy(infilename, filename, FILENAMESIZE - 1);
- infilename[FILENAMESIZE - 1] = '\0';
- if (infilename[0] == '\0') {
- printf("Error: No filename.\n");
- return false;
- }
- if (strcmp(&infilename[strlen(infilename) - 4], ".ply") != 0) {
- strcat(infilename, ".ply");
- }
-
- if (!(fp = fopen(infilename, "r"))) {
- printf("Error: Unable to open file %s\n", infilename);
- return false;
- }
- printf("Opening %s.\n", infilename);
-
- // PLY requires the index starts from '0'.
- firstnumber = 0;
-
- while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
- if (!endheader) {
- // Find if it is the keyword "end_header".
- str = strstr(bufferp, "end_header");
- // strstr() is case sensitive.
- if (!str) str = strstr(bufferp, "End_header");
- if (!str) str = strstr(bufferp, "End_Header");
- if (str) {
- // This is the end of the header section.
- endheader = 1;
- continue;
- }
- // Parse the number of vertices and the number of faces.
- if (nverts == 0 || nfaces == 0) {
- // Find if it si the keyword "element".
- str = strstr(bufferp, "element");
- if (!str) str = strstr(bufferp, "Element");
- if (str) {
- bufferp = findnextfield(str);
- if (*bufferp == '\0') {
- printf("Syntax error reading element type on line%d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- if (nverts == 0) {
- // Find if it is the keyword "vertex".
- str = strstr(bufferp, "vertex");
- if (!str) str = strstr(bufferp, "Vertex");
- if (str) {
- bufferp = findnextnumber(str);
- if (*bufferp == '\0') {
- printf("Syntax error reading vertex number on line");
- printf(" %d in file %s\n", line_count, infilename);
- fclose(fp);
- return false;
- }
- nverts = (int) strtol(bufferp, &bufferp, 0);
- // Allocate memory for 'tetgenio'
- if (nverts > 0) {
- numberofpoints = nverts;
- pointlist = new REAL[nverts * 3];
- assert(pointlist != NULL);
- }
- }
- }
- if (nfaces == 0) {
- // Find if it is the keyword "face".
- str = strstr(bufferp, "face");
- if (!str) str = strstr(bufferp, "Face");
- if (str) {
- bufferp = findnextnumber(str);
- if (*bufferp == '\0') {
- printf("Syntax error reading face number on line");
- printf(" %d in file %s\n", line_count, infilename);
- fclose(fp);
- return false;
- }
- nfaces = (int) strtol(bufferp, &bufferp, 0);
- // Allocate memory for 'tetgenio'
- if (nfaces > 0) {
- numberoffacets = nfaces;
- facetlist = new tetgenio::facet[nfaces];
- assert(facetlist);
- }
- }
- }
- } // It is not the string "element".
- }
- if (format == 0) {
- // Find the keyword "format".
- str = strstr(bufferp, "format");
- if (!str) str = strstr(bufferp, "Format");
- if (str) {
- format = 1;
- bufferp = findnextfield(str);
- // Find if it is the string "ascii".
- str = strstr(bufferp, "ascii");
- if (!str) str = strstr(bufferp, "ASCII");
- if (!str) {
- printf("This routine only reads ascii format of ply files.\n");
- printf("Hint: You can convert the binary to ascii format by\n");
- printf(" using the provided ply tools:\n");
- printf(" ply2ascii < %s > ascii_%s\n", infilename, infilename);
- fclose(fp);
- return false;
- }
- }
- }
- } else if (iverts < nverts) {
- // Read vertex coordinates
- coord = &pointlist[iverts * 3];
- for (i = 0; i < 3; i++) {
- if (*bufferp == '\0') {
- printf("Syntax error reading vertex coords on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- coord[i] = (REAL) strtod(bufferp, &bufferp);
- bufferp = findnextnumber(bufferp);
- }
- iverts++;
- } else if (ifaces < nfaces) {
- // Get next face
- f = &facetlist[ifaces];
- init(f);
- // In .off format, each facet has one polygon, no hole.
- f->numberofpolygons = 1;
- f->polygonlist = new tetgenio::polygon[1];
- p = &f->polygonlist[0];
- init(p);
- // Read the number of vertices, it should be greater than 0.
- p->numberofvertices = (int) strtol(bufferp, &bufferp, 0);
- if (p->numberofvertices == 0) {
- printf("Syntax error reading polygon on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- // Allocate memory for face vertices
- p->vertexlist = new int[p->numberofvertices];
- for (i = 0; i < p->numberofvertices; i++) {
- bufferp = findnextnumber(bufferp);
- if (*bufferp == '\0') {
- printf("Syntax error reading polygon on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- p->vertexlist[i] = (int) strtol(bufferp, &bufferp, 0);
- }
- ifaces++;
- } else {
- // Should never get here
- printf("Found extra text starting at line %d in file %s\n", line_count,
- infilename);
- break;
- }
- }
-
- // Close file
- fclose(fp);
-
- // Check whether read all points
- if (iverts != nverts) {
- printf("Expected %d vertices, but read only %d vertices in file %s\n",
- nverts, iverts, infilename);
- return false;
- }
-
- // Check whether read all faces
- if (ifaces != nfaces) {
- printf("Expected %d faces, but read only %d faces in file %s\n",
- nfaces, ifaces, infilename);
- return false;
- }
-
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_stl() Load a surface mesh described in a .stl file. //
-// //
-// 'filename' is the file name with extension .stl or without extension (the //
-// .stl will be added in this case). //
-// //
-// The .stl or stereolithography format is an ASCII or binary file used in //
-// manufacturing. It is a list of the triangular surfaces that describe a //
-// computer generated solid model. This is the standard input for most rapid //
-// prototyping machines. //
-// //
-// On completion, 'pointlist' and 'facetlist' together return the polyhedron.//
-// Note: After load_stl(), there exist many duplicated points in 'pointlist'.//
-// They will be unified during the Delaunay tetrahedralization process. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_stl(char* filename)
-{
- FILE *fp;
- tetgenmesh::list *plist;
- tetgenio::facet *f;
- tetgenio::polygon *p;
- char infilename[FILENAMESIZE];
- char buffer[INPUTLINESIZE];
- char *bufferp, *str;
- double *coord;
- int solid = 0;
- int nverts = 0, iverts = 0;
- int nfaces = 0;
- int line_count = 0, i;
-
- strncpy(infilename, filename, FILENAMESIZE - 1);
- infilename[FILENAMESIZE - 1] = '\0';
- if (infilename[0] == '\0') {
- printf("Error: No filename.\n");
- return false;
- }
- if (strcmp(&infilename[strlen(infilename) - 4], ".stl") != 0) {
- strcat(infilename, ".stl");
- }
-
- if (!(fp = fopen(infilename, "r"))) {
- printf("Error: Unable to open file %s\n", infilename);
- return false;
- }
- printf("Opening %s.\n", infilename);
-
- // STL file has no number of points available. Use a list to read points.
- plist = new tetgenmesh::list(sizeof(double) * 3, NULL, 1024);
-
- while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
- // The ASCII .stl file must start with the lower case keyword solid and
- // end with endsolid.
- if (solid == 0) {
- // Read header
- bufferp = strstr(bufferp, "solid");
- if (bufferp != NULL) {
- solid = 1;
- }
- } else {
- // We're inside the block of the solid.
- str = bufferp;
- // Is this the end of the solid.
- bufferp = strstr(bufferp, "endsolid");
- if (bufferp != NULL) {
- solid = 0;
- } else {
- // Read the XYZ coordinates if it is a vertex.
- bufferp = str;
- bufferp = strstr(bufferp, "vertex");
- if (bufferp != NULL) {
- coord = (double *) plist->append(NULL);
- for (i = 0; i < 3; i++) {
- bufferp = findnextnumber(bufferp);
- if (*bufferp == '\0') {
- printf("Syntax error reading vertex coords on line %d\n",
- line_count);
- delete plist;
- fclose(fp);
- return false;
- }
- coord[i] = (REAL) strtod(bufferp, &bufferp);
- }
- }
- }
- }
- }
- fclose(fp);
-
- nverts = plist->len();
- // nverts should be an integer times 3 (every 3 vertices denote a face).
- if (nverts == 0 || (nverts % 3 != 0)) {
- printf("Error: Wrong number of vertices in file %s.\n", infilename);
- delete plist;
- return false;
- }
- numberofpoints = nverts;
- pointlist = new REAL[nverts * 3];
- assert(pointlist != NULL);
- for (i = 0; i < nverts; i++) {
- coord = (double *) (* plist)[i];
- iverts = i * 3;
- pointlist[iverts] = (REAL) coord[0];
- pointlist[iverts + 1] = (REAL) coord[1];
- pointlist[iverts + 2] = (REAL) coord[2];
- }
-
- nfaces = (int) (nverts / 3);
- numberoffacets = nfaces;
- facetlist = new tetgenio::facet[nfaces];
- assert(facetlist != NULL);
-
- // Default use '1' as the array starting index.
- firstnumber = 1;
- iverts = firstnumber;
- for (i = 0; i < nfaces; i++) {
- f = &facetlist[i];
- init(f);
- // In .stl format, each facet has one polygon, no hole.
- f->numberofpolygons = 1;
- f->polygonlist = new tetgenio::polygon[1];
- p = &f->polygonlist[0];
- init(p);
- // Each polygon has three vertices.
- p->numberofvertices = 3;
- p->vertexlist = new int[p->numberofvertices];
- p->vertexlist[0] = iverts;
- p->vertexlist[1] = iverts + 1;
- p->vertexlist[2] = iverts + 2;
- iverts += 3;
- }
-
- delete plist;
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_medit() Load a surface mesh described in .mesh file. //
-// //
-// 'filename' is the file name with extension .mesh or without entension ( //
-// the .mesh will be added in this case). .mesh is the file format of Medit, //
-// a user-friendly interactive mesh viewing program. //
-// //
-// This routine ONLY reads the sections containing vertices and triangles, //
-// other sections (such as tetrahedra, edges, ...) are ignored. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_medit(char* filename)
-{
- FILE *fp;
- tetgenio::facet *f;
- tetgenio::polygon *p;
- char infilename[FILENAMESIZE];
- char buffer[INPUTLINESIZE];
- char *bufferp, *str;
- double *coord;
- int nverts = 0;
- int nfaces = 0;
- int line_count = 0;
- int corners = 0; // 3 (triangle) or 4 (quad).
- int i, j;
-
- strncpy(infilename, filename, FILENAMESIZE - 1);
- infilename[FILENAMESIZE - 1] = '\0';
- if (infilename[0] == '\0') {
- printf("Error: No filename.\n");
- return false;
- }
- if (strcmp(&infilename[strlen(infilename) - 5], ".mesh") != 0) {
- strcat(infilename, ".mesh");
- }
-
- if (!(fp = fopen(infilename, "r"))) {
- printf("Error: Unable to open file %s\n", infilename);
- return false;
- }
- printf("Opening %s.\n", infilename);
-
- // Default uses the index starts from '1'.
- firstnumber = 1;
-
- while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
- if (*bufferp == '#') continue; // A comment line is skipped.
- if (nverts == 0) {
- // Find if it is the keyword "Vertices".
- str = strstr(bufferp, "Vertices");
- if (!str) str = strstr(bufferp, "vertices");
- if (!str) str = strstr(bufferp, "VERTICES");
- if (str) {
- // Read the number of vertices.
- bufferp = findnextnumber(str); // Skip field "Vertices".
- if (*bufferp == '\0') {
- // Read a non-empty line.
- bufferp = readline(buffer, fp, &line_count);
- }
- nverts = (int) strtol(bufferp, &bufferp, 0);
- // Allocate memory for 'tetgenio'
- if (nverts > 0) {
- numberofpoints = nverts;
- pointlist = new REAL[nverts * 3];
- assert(pointlist != NULL);
- }
- // Read the follwoing node list.
- for (i = 0; i < nverts; i++) {
- bufferp = readline(buffer, fp, &line_count);
- if (bufferp == NULL) {
- printf("Unexpected end of file on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- // Read vertex coordinates
- coord = &pointlist[i * 3];
- for (j = 0; j < 3; j++) {
- if (*bufferp == '\0') {
- printf("Syntax error reading vertex coords on line");
- printf(" %d in file %s\n", line_count, infilename);
- fclose(fp);
- return false;
- }
- coord[j] = (REAL) strtod(bufferp, &bufferp);
- bufferp = findnextnumber(bufferp);
- }
- }
- continue;
- }
- }
- if (nfaces == 0) {
- // Find if it is the keyword "Triangles" or "Quadrilaterals".
- str = strstr(bufferp, "Triangles");
- if (!str) str = strstr(bufferp, "triangles");
- if (!str) str = strstr(bufferp, "TRIANGLES");
- if (str) {
- corners = 3;
- } else {
- str = strstr(bufferp, "Quadrilaterals");
- if (!str) str = strstr(bufferp, "quadrilaterals");
- if (!str) str = strstr(bufferp, "QUADRILATERALS");
- if (str) {
- corners = 4;
- }
- }
- if (corners == 3 || corners == 4) {
- // Read the number of triangles (or quadrilaterals).
- bufferp = findnextnumber(str); // Skip field "Triangles".
- if (*bufferp == '\0') {
- // Read a non-empty line.
- bufferp = readline(buffer, fp, &line_count);
- }
- nfaces = strtol(bufferp, &bufferp, 0);
- // Allocate memory for 'tetgenio'
- if (nfaces > 0) {
- numberoffacets = nfaces;
- facetlist = new tetgenio::facet[nfaces];
- assert(facetlist != NULL);
- facetmarkerlist = new int[nfaces];
- assert(facetmarkerlist != NULL);
- }
- // Read the following list of faces.
- for (i = 0; i < nfaces; i++) {
- bufferp = readline(buffer, fp, &line_count);
- if (bufferp == NULL) {
- printf("Unexpected end of file on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- f = &facetlist[i];
- tetgenio::init(f);
- // In .mesh format, each facet has one polygon, no hole.
- f->numberofpolygons = 1;
- f->polygonlist = new tetgenio::polygon[1];
- p = &f->polygonlist[0];
- tetgenio::init(p);
- p->numberofvertices = corners;
- // Allocate memory for face vertices
- p->vertexlist = new int[p->numberofvertices];
- assert(p->vertexlist != NULL);
- // Read the vertices of the face.
- for (j = 0; j < corners; j++) {
- if (*bufferp == '\0') {
- printf("Syntax error reading face on line %d in file %s\n",
- line_count, infilename);
- fclose(fp);
- return false;
- }
- p->vertexlist[j] = (int) strtol(bufferp, &bufferp, 0);
- if (firstnumber == 1) {
- // Check if a '0' index appears.
- if (p->vertexlist[j] == 0) {
- // The first index is set to be 0.
- firstnumber = 0;
- }
- }
- bufferp = findnextnumber(bufferp);
- }
- // Read the marker of the face if it exists.
- facetmarkerlist[i] = 0;
- if (*bufferp != '\0') {
- facetmarkerlist[i] = (int) strtol(bufferp, &bufferp, 0);
- }
- }
- continue;
- }
- }
- if (nverts > 0 && nfaces > 0) break; // Ignore other data.
- }
-
- // Close file
- fclose(fp);
-
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_plc() Load a piecewise linear complex from file. //
-// //
-// This is main entrance for loading plcs from different file formats into //
-// tetgenio. 'filename' is the input file name without extention. 'object' //
-// indicates which file format is used to describ the plc. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_plc(char* filename, int object)
-{
- enum tetgenbehavior::objecttype type;
-
- type = (enum tetgenbehavior::objecttype) object;
- switch (type) {
- case tetgenbehavior::NODES:
- return load_node(filename);
- case tetgenbehavior::POLY:
- return load_poly(filename);
- case tetgenbehavior::OFF:
- return load_off(filename);
- case tetgenbehavior::PLY:
- return load_ply(filename);
- case tetgenbehavior::STL:
- return load_stl(filename);
- case tetgenbehavior::MEDIT:
- return load_medit(filename);
- default:
- return load_poly(filename);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// load_tetmesh() Load a tetrahedral mesh from files. //
-// //
-// 'filename' is the inputfile without suffix. The nodes of the tetrahedral //
-// mesh is in "filename.node", the elements is in "filename.ele", if the //
-// "filename.face" and "filename.vol" exists, they will also be read. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenio::load_tetmesh(char* filename)
-{
- FILE *infile;
- char innodefilename[FILENAMESIZE];
- char inelefilename[FILENAMESIZE];
- char infacefilename[FILENAMESIZE];
- char inedgefilename[FILENAMESIZE];
- char involfilename[FILENAMESIZE];
- char inputline[INPUTLINESIZE];
- char *stringptr, *infilename;
- REAL attrib, volume;
- int volelements;
- int markers, corner;
- int index, attribindex;
- int i, j;
-
- // Assembling the actual file names we want to open.
- strcpy(innodefilename, filename);
- strcpy(inelefilename, filename);
- strcpy(infacefilename, filename);
- strcpy(inedgefilename, filename);
- strcpy(involfilename, filename);
- strcat(innodefilename, ".node");
- strcat(inelefilename, ".ele");
- strcat(infacefilename, ".face");
- strcat(inedgefilename, ".edge");
- strcat(involfilename, ".vol");
-
- // Read the points from a .node file.
- infilename = innodefilename;
- printf("Opening %s.\n", infilename);
- infile = fopen(infilename, "r");
- if (infile == (FILE *) NULL) {
- printf("File I/O Error: Cannot access file %s.\n", infilename);
- return false;
- }
- // Read number of points, number of dimensions, number of point
- // attributes, and number of boundary markers.
- stringptr = readnumberline(inputline, infile, infilename);
- numberofpoints = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- mesh_dim = 3;
- } else {
- mesh_dim = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- numberofpointattributes = 0;
- } else {
- numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- markers = 0; // Default value.
- } else {
- markers = (int) strtol (stringptr, &stringptr, 0);
- }
-
- if (mesh_dim != 3) {
- printf("Error: load_tetmesh() only works for 3D points.\n");
- fclose(infile);
- return false;
- }
- if (numberofpoints < 4) {
- printf("File I/O error: Input should has at least 4 points.\n");
- fclose(infile);
- return false;
- }
-
- // Load the list of nodes.
- if (!load_node_call(infile, markers, infilename)) {
- fclose(infile);
- return false;
- }
-
- // Read the elements from a .ele file.
- infilename = inelefilename;
- printf("Opening %s.\n", infilename);
- infile = fopen(infilename, "r");
- if (infile != (FILE *) NULL) {
- // Read number of elements, number of corners (4 or 10), number of
- // element attributes.
- stringptr = readnumberline(inputline, infile, infilename);
- numberoftetrahedra = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- numberofcorners = 4; // Default read 4 nodes per element.
- } else {
- numberofcorners = (int) strtol (stringptr, &stringptr, 0);
- }
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- numberoftetrahedronattributes = 0; // Default no attribute.
- } else {
- numberoftetrahedronattributes = (int) strtol (stringptr, &stringptr, 0);
- }
- if (numberofcorners != 4 && numberofcorners != 10) {
- printf("Error: Wrong number of corners %d (should be 4 or 10).\n",
- numberofcorners);
- fclose(infile);
- return false;
- }
- // Allocate memory for tetrahedra.
- if (numberoftetrahedra > 0) {
- tetrahedronlist = new int[numberoftetrahedra * numberofcorners];
- if (tetrahedronlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- // Allocate memory for output tetrahedron attributes if necessary.
- if (numberoftetrahedronattributes > 0) {
- tetrahedronattributelist = new REAL[numberoftetrahedra *
- numberoftetrahedronattributes];
- if (tetrahedronattributelist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- }
- // Read the list of tetrahedra.
- index = 0;
- attribindex = 0;
- for (i = 0; i < numberoftetrahedra; i++) {
- // Read tetrahedron index and the tetrahedron's corners.
- stringptr = readnumberline(inputline, infile, infilename);
- for (j = 0; j < numberofcorners; j++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Tetrahedron %d is missing vertex %d in %s.\n",
- i + firstnumber, j + 1, infilename);
- exit(1);
- }
- corner = (int) strtol(stringptr, &stringptr, 0);
- if (corner < firstnumber || corner >= numberofpoints + firstnumber) {
- printf("Error: Tetrahedron %d has an invalid vertex index.\n",
- i + firstnumber);
- exit(1);
- }
- tetrahedronlist[index++] = corner;
- }
- // Read the tetrahedron's attributes.
- for (j = 0; j < numberoftetrahedronattributes; j++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- attrib = 0.0;
- } else {
- attrib = (REAL) strtod(stringptr, &stringptr);
- }
- tetrahedronattributelist[attribindex++] = attrib;
- }
- }
- fclose(infile);
- }
-
- // Read the hullfaces or subfaces from a .face file if it exists.
- infilename = infacefilename;
- infile = fopen(infilename, "r");
- if (infile != (FILE *) NULL) {
- printf("Opening %s.\n", infilename);
- // Read number of faces, boundary markers.
- stringptr = readnumberline(inputline, infile, infilename);
- numberoftrifaces = (int) strtol (stringptr, &stringptr, 0);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- markers = 0; // Default there is no marker per face.
- } else {
- markers = (int) strtol (stringptr, &stringptr, 0);
- }
- if (numberoftrifaces > 0) {
- trifacelist = new int[numberoftrifaces * 3];
- if (trifacelist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- if (markers) {
- trifacemarkerlist = new int[numberoftrifaces * 3];
- if (trifacemarkerlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- }
- // Read the list of faces.
- index = 0;
- for (i = 0; i < numberoftrifaces; i++) {
- // Read face index and the face's three corners.
- stringptr = readnumberline(inputline, infile, infilename);
- for (j = 0; j < 3; j++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Face %d is missing vertex %d in %s.\n",
- i + firstnumber, j + 1, infilename);
- exit(1);
- }
- corner = (int) strtol(stringptr, &stringptr, 0);
- if (corner < firstnumber || corner >= numberofpoints + firstnumber) {
- printf("Error: Face %d has an invalid vertex index.\n",
- i + firstnumber);
- exit(1);
- }
- trifacelist[index++] = corner;
- }
- // Read the boundary marker if it exists.
- if (markers) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- attrib = 0.0;
- } else {
- attrib = (REAL) strtod(stringptr, &stringptr);
- }
- trifacemarkerlist[i] = (int) attrib;
- }
- }
- fclose(infile);
- }
-
- // Read the boundary edges from a .edge file if it exists.
- infilename = inedgefilename;
- infile = fopen(infilename, "r");
- if (infile != (FILE *) NULL) {
- printf("Opening %s.\n", infilename);
- // Read number of boundary edges.
- stringptr = readnumberline(inputline, infile, infilename);
- numberofedges = (int) strtol (stringptr, &stringptr, 0);
- if (numberofedges > 0) {
- edgelist = new int[numberofedges * 2];
- if (edgelist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- // Read the list of faces.
- index = 0;
- for (i = 0; i < numberofedges; i++) {
- // Read face index and the edge's two endpoints.
- stringptr = readnumberline(inputline, infile, infilename);
- for (j = 0; j < 2; j++) {
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- printf("Error: Edge %d is missing vertex %d in %s.\n",
- i + firstnumber, j + 1, infilename);
- exit(1);
- }
- corner = (int) strtol(stringptr, &stringptr, 0);
- if (corner < firstnumber || corner >= numberofpoints + firstnumber) {
- printf("Error: Edge %d has an invalid vertex index.\n",
- i + firstnumber);
- exit(1);
- }
- edgelist[index++] = corner;
- }
- }
- fclose(infile);
- }
-
- // Read the volume constraints from a .vol file if it exists.
- infilename = involfilename;
- infile = fopen(infilename, "r");
- if (infile != (FILE *) NULL) {
- printf("Opening %s.\n", infilename);
- // Read number of tetrahedra.
- stringptr = readnumberline(inputline, infile, infilename);
- volelements = (int) strtol (stringptr, &stringptr, 0);
- if (volelements != numberoftetrahedra) {
- printf("Warning: %s and %s disagree on number of tetrahedra.\n",
- inelefilename, involfilename);
- volelements = 0;
- }
- if (volelements > 0) {
- tetrahedronvolumelist = new REAL[volelements];
- if (tetrahedronvolumelist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- // Read the list of volume constraints.
- for (i = 0; i < volelements; i++) {
- stringptr = readnumberline(inputline, infile, infilename);
- stringptr = findnextnumber(stringptr);
- if (*stringptr == '\0') {
- volume = -1.0; // No constraint on this tetrahedron.
- } else {
- volume = (REAL) strtod(stringptr, &stringptr);
- }
- tetrahedronvolumelist[i] = volume;
- }
- fclose(infile);
- }
-
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// save_nodes() Save points to a .node file. //
-// //
-// 'filename' is a string containing the file name without suffix. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::save_nodes(char* filename)
-{
- FILE *fout;
- char outnodefilename[FILENAMESIZE];
- int i, j;
-
- sprintf(outnodefilename, "%s.node", filename);
- printf("Saving nodes to %s\n", outnodefilename);
- fout = fopen(outnodefilename, "w");
- fprintf(fout, "%d %d %d %d\n", numberofpoints, mesh_dim,
- numberofpointattributes, pointmarkerlist != NULL ? 1 : 0);
- for (i = 0; i < numberofpoints; i++) {
- if (mesh_dim == 2) {
- fprintf(fout, "%d %.16g %.16g", i + firstnumber, pointlist[i * 2],
- pointlist[i * 2 + 1]);
- } else {
- fprintf(fout, "%d %.16g %.16g %.16g", i + firstnumber,
- pointlist[i * 3], pointlist[i * 3 + 1], pointlist[i * 3 + 2]);
- }
- for (j = 0; j < numberofpointattributes; j++) {
- fprintf(fout, " %.16g",
- pointattributelist[i * numberofpointattributes+j]);
- }
- if (pointmarkerlist != NULL) {
- fprintf(fout, " %d", pointmarkerlist[i]);
- }
- fprintf(fout, "\n");
- }
-
- fclose(fout);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// save_elements() Save elements to a .ele file. //
-// //
-// 'filename' is a string containing the file name without suffix. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::save_elements(char* filename)
-{
- FILE *fout;
- char outelefilename[FILENAMESIZE];
- int i, j;
-
- sprintf(outelefilename, "%s.ele", filename);
- printf("Saving elements to %s\n", outelefilename);
- fout = fopen(outelefilename, "w");
- fprintf(fout, "%d %d %d\n", numberoftetrahedra, numberofcorners,
- numberoftetrahedronattributes);
- for (i = 0; i < numberoftetrahedra; i++) {
- fprintf(fout, "%d", i + firstnumber);
- for (j = 0; j < numberofcorners; j++) {
- fprintf(fout, " %5d", tetrahedronlist[i * numberofcorners + j]);
- }
- for (j = 0; j < numberoftetrahedronattributes; j++) {
- fprintf(fout, " %g",
- tetrahedronattributelist[i * numberoftetrahedronattributes + j]);
- }
- fprintf(fout, "\n");
- }
-
- fclose(fout);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// save_faces() Save faces to a .face file. //
-// //
-// 'filename' is a string containing the file name without suffix. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::save_faces(char* filename)
-{
- FILE *fout;
- char outfacefilename[FILENAMESIZE];
- int i;
-
- sprintf(outfacefilename, "%s.face", filename);
- printf("Saving faces to %s\n", outfacefilename);
- fout = fopen(outfacefilename, "w");
- fprintf(fout, "%d %d\n", numberoftrifaces,
- trifacemarkerlist != NULL ? 1 : 0);
- for (i = 0; i < numberoftrifaces; i++) {
- fprintf(fout, "%d %5d %5d %5d", i + firstnumber, trifacelist[i * 3],
- trifacelist[i * 3 + 1], trifacelist[i * 3 +2]);
- if (trifacemarkerlist != NULL) {
- fprintf(fout, " %d", trifacemarkerlist[i]);
- }
- fprintf(fout, "\n");
- }
-
- fclose(fout);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// save_edges() Save egdes to a .edge file. //
-// //
-// 'filename' is a string containing the file name without suffix. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::save_edges(char* filename)
-{
- FILE *fout;
- char outedgefilename[FILENAMESIZE];
- int i;
-
- sprintf(outedgefilename, "%s.edge", filename);
- printf("Saving edges to %s\n", outedgefilename);
- fout = fopen(outedgefilename, "w");
- fprintf(fout, "%d %d\n", numberofedges, edgemarkerlist != NULL ? 1 : 0);
- for (i = 0; i < numberofedges; i++) {
- fprintf(fout, "%d %4d %4d", i + firstnumber, edgelist[i * 2],
- edgelist[i * 2 + 1]);
- if (edgemarkerlist != NULL) {
- fprintf(fout, " %d", edgemarkerlist[i]);
- }
- fprintf(fout, "\n");
- }
-
- fclose(fout);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// save_neighbors() Save egdes to a .neigh file. //
-// //
-// 'filename' is a string containing the file name without suffix. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::save_neighbors(char* filename)
-{
- FILE *fout;
- char outneighborfilename[FILENAMESIZE];
- int i;
-
- sprintf(outneighborfilename, "%s.neigh", filename);
- printf("Saving neighbors to %s\n", outneighborfilename);
- fout = fopen(outneighborfilename, "w");
- fprintf(fout, "%d %d\n", numberoftetrahedra, mesh_dim + 1);
- for (i = 0; i < numberoftetrahedra; i++) {
- if (mesh_dim == 2) {
- fprintf(fout, "%d %5d %5d %5d", i + firstnumber, neighborlist[i * 3],
- neighborlist[i * 3 + 1], neighborlist[i * 3 + 2]);
- } else {
- fprintf(fout, "%d %5d %5d %5d %5d", i + firstnumber,
- neighborlist[i * 4], neighborlist[i * 4 + 1],
- neighborlist[i * 4 + 2], neighborlist[i * 4 + 3]);
- }
- fprintf(fout, "\n");
- }
-
- fclose(fout);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// save_poly() Save segments or facets to a .poly file. //
-// //
-// 'filename' is a string containing the file name without suffix. It only //
-// save the facets, holes and regions. The nodes are saved in a .node file //
-// by routine save_nodes(). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenio::save_poly(char* filename)
-{
- FILE *fout;
- facet *f;
- polygon *p;
- char outpolyfilename[FILENAMESIZE];
- int i, j, k;
-
- sprintf(outpolyfilename, "%s.poly", filename);
- printf("Saving poly to %s\n", outpolyfilename);
- fout = fopen(outpolyfilename, "w");
-
- // The zero indicates that the vertices are in a separate .node file.
- // Followed by number of dimensions, number of vertex attributes,
- // and number of boundary markers (zero or one).
- fprintf(fout, "%d %d %d %d\n", 0, mesh_dim, numberofpointattributes,
- pointmarkerlist != NULL ? 1 : 0);
-
- // Save segments or facets.
- if (mesh_dim == 2) {
- // Number of segments, number of boundary markers (zero or one).
- fprintf(fout, "%d %d\n", numberofedges, edgemarkerlist != NULL ? 1 : 0);
- for (i = 0; i < numberofedges; i++) {
- fprintf(fout, "%d %4d %4d", i + firstnumber, edgelist[i * 2],
- edgelist[i * 2 + 1]);
- if (edgemarkerlist != NULL) {
- fprintf(fout, " %d", edgemarkerlist[i]);
- }
- fprintf(fout, "\n");
- }
- } else {
- // Number of facets, number of boundary markers (zero or one).
- fprintf(fout, "%d %d\n", numberoffacets, facetmarkerlist != NULL ? 1 : 0);
- for (i = 0; i < numberoffacets; i++) {
- f = &(facetlist[i]);
- fprintf(fout, "%d %d %d # %d\n", f->numberofpolygons,f->numberofholes,
- facetmarkerlist != NULL ? facetmarkerlist[i] : 0, i + firstnumber);
- // Output polygons of this facet.
- for (j = 0; j < f->numberofpolygons; j++) {
- p = &(f->polygonlist[j]);
- fprintf(fout, "%d ", p->numberofvertices);
- for (k = 0; k < p->numberofvertices; k++) {
- if (((k + 1) % 10) == 0) {
- fprintf(fout, "\n ");
- }
- fprintf(fout, " %d", p->vertexlist[k]);
- }
- fprintf(fout, "\n");
- }
- // Output holes of this facet.
- for (j = 0; j < f->numberofholes; j++) {
- fprintf(fout, "%d %.12g %.12g %.12g\n", j + firstnumber,
- f->holelist[j * 3], f->holelist[j * 3 + 1], f->holelist[j * 3 + 2]);
- }
- }
- }
-
- // Save holes.
- fprintf(fout, "%d\n", numberofholes);
- for (i = 0; i < numberofholes; i++) {
- // Output x, y coordinates.
- fprintf(fout, "%d %.12g %.12g", i + firstnumber, holelist[i * mesh_dim],
- holelist[i * mesh_dim + 1]);
- if (mesh_dim == 3) {
- // Output z coordinate.
- fprintf(fout, " %.12g", holelist[i * mesh_dim + 2]);
- }
- fprintf(fout, "\n");
- }
-
- // Save regions.
- fprintf(fout, "%d\n", numberofregions);
- for (i = 0; i < numberofregions; i++) {
- if (mesh_dim == 2) {
- // Output the index, x, y coordinates, attribute (region number)
- // and maximum area constraint (maybe -1).
- fprintf(fout, "%d %.12g %.12g %.12g %.12g\n", i + firstnumber,
- regionlist[i * 4], regionlist[i * 4 + 1],
- regionlist[i * 4 + 2], regionlist[i * 4 + 3]);
- } else {
- // Output the index, x, y, z coordinates, attribute (region number)
- // and maximum volume constraint (maybe -1).
- fprintf(fout, "%d %.12g %.12g %.12g %.12g %.12g\n", i + firstnumber,
- regionlist[i * 5], regionlist[i * 5 + 1],
- regionlist[i * 5 + 2], regionlist[i * 5 + 3],
- regionlist[i * 5 + 4]);
- }
- }
-
- fclose(fout);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// readline() Read a nonempty line from a file. //
-// //
-// A line is considered "nonempty" if it contains something more than white //
-// spaces. If a line is considered empty, it will be dropped and the next //
-// line will be read, this process ends until reaching the end-of-file or a //
-// non-empty line. Return NULL if it is the end-of-file, otherwise, return //
-// a pointer to the first non-whitespace character of the line. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-char* tetgenio::readline(char *string, FILE *infile, int *linenumber)
-{
- char *result;
-
- // Search for a non-empty line.
- do {
- result = fgets(string, INPUTLINESIZE - 1, infile);
- (*linenumber)++;
- if (result == (char *) NULL) {
- return (char *) NULL;
- }
- // Skip white spaces.
- while ((*result == ' ') || (*result == '\t')) result++;
- // If it's end of line, read another line and try again.
- } while (*result == '\0');
- return result;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// findnextfield() Find the next field of a string. //
-// //
-// Jumps past the current field by searching for whitespace or a comma, then //
-// jumps past the whitespace or the comma to find the next field. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-char* tetgenio::findnextfield(char *string)
-{
- char *result;
-
- result = string;
- // Skip the current field. Stop upon reaching whitespace or a comma.
- while ((*result != '\0') && (*result != ' ') && (*result != '\t') &&
- (*result != ',')) {
- result++;
- }
- // Now skip the whitespace or the comma, stop at anything else that looks
- // like a character, or the end of a line.
- while ((*result == ' ') || (*result == '\t') || (*result == ',')) {
- result++;
- }
- return result;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// readnumberline() Read a nonempty number line from a file. //
-// //
-// A line is considered "nonempty" if it contains something that looks like //
-// a number. Comments (prefaced by `#') are ignored. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-char* tetgenio::readnumberline(char *string, FILE *infile, char *infilename)
-{
- char *result;
-
- // Search for something that looks like a number.
- do {
- result = fgets(string, INPUTLINESIZE, infile);
- if (result == (char *) NULL) {
- printf(" Error: Unexpected end of file in %s.\n", infilename);
- exit(1);
- }
- // Skip anything that doesn't look like a number, a comment,
- // or the end of a line.
- while ((*result != '\0') && (*result != '#')
- && (*result != '.') && (*result != '+') && (*result != '-')
- && ((*result < '0') || (*result > '9'))) {
- result++;
- }
- // If it's a comment or end of line, read another line and try again.
- } while ((*result == '#') || (*result == '\0'));
- return result;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// findnextnumber() Find the next field of a number string. //
-// //
-// Jumps past the current field by searching for whitespace or a comma, then //
-// jumps past the whitespace or the comma to find the next field that looks //
-// like a number. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-char* tetgenio::findnextnumber(char *string)
-{
- char *result;
-
- result = string;
- // Skip the current field. Stop upon reaching whitespace or a comma.
- while ((*result != '\0') && (*result != '#') && (*result != ' ') &&
- (*result != '\t') && (*result != ',')) {
- result++;
- }
- // Now skip the whitespace and anything else that doesn't look like a
- // number, a comment, or the end of a line.
- while ((*result != '\0') && (*result != '#')
- && (*result != '.') && (*result != '+') && (*result != '-')
- && ((*result < '0') || (*result > '9'))) {
- result++;
- }
- // Check for a comment (prefixed with `#').
- if (*result == '#') {
- *result = '\0';
- }
- return result;
-}
-
-//
-// End of class 'tetgenio' implementation
-//
-
-static REAL PI = 3.14159265358979323846264338327950288419716939937510582;
-
-//
-// Begin of class 'tetgenbehavior' implementation
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetgenbehavior() Initialize veriables of 'tetgenbehavior'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenbehavior::tetgenbehavior()
-{
- // Initialize command line switches.
- plc = 0;
- refine = 0;
- quality = 0;
- minratio = 2.0;
- goodratio = 0.0;
- minangle = 20.0;
- goodangle = 0.0;
- varvolume = 0;
- fixedvolume = 0;
- maxvolume = -1.0;
- regionattrib = 0;
- insertaddpoints = 0;
- removesliver = 0;
- maxdihedral = 0.0;
- detectinter = 0;
- checkclosure = 0;
- zeroindex = 0;
- jettison = 0;
- facesout = 0;
- edgesout = 0;
- neighout = 0;
- meditview = 0;
- gidview = 0;
- geomview = 0;
- order = 1;
- nobound = 0;
- nonodewritten = 0;
- noelewritten = 0;
- nofacewritten = 0;
- noiterationnum = 0;
- nobisect = 0;
- noflip = 0;
- steiner = -1;
- dopermute = 0;
- srandseed = 1;
- nomerge = 0;
- docheck = 0;
- quiet = 0;
- verbose = 0;
- useshelles = 0;
- epsilon = 1.0e-8;
- object = NONE;
- // Initialize strings
- commandline[0] = '\0';
- infilename[0] = '\0';
- outfilename[0] = '\0';
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// versioninfo() Print the version information of TetGen. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenbehavior::versioninfo()
-{
- printf("Version 1.3.2 (Released on December 13, 2004).\n");
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// syntax() Print list of command line switches and exit the program. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenbehavior::syntax()
-{
- printf(" tetgen [-pq__a__AriMS__T__dzo_fengGOBNEFICQVvh] input_file\n");
- printf(" -p Tetrahedralizes a piecewise linear complex.\n");
- printf(" -q Quality mesh generation. A minimum radius-edge ratio may\n");
- printf(" be specified (default 2.0).\n");
- printf(" -a Applies a maximum tetrahedron volume constraint.\n");
- printf(" -A Assigns attributes to identify tetrahedra in certain ");
- printf("regions.\n");
- printf(" -r Reconstructs/Refines a previously generated mesh.\n");
- printf(" -i Inserts a list of additional points into mesh.\n");
- printf(" -M Does not merge coplanar facets.\n");
- printf(" -S Specifies maximum number of added Steiner points.\n");
- printf(" -T Set a tolerance for coplanar test (default 1e-8).\n");
- printf(" -d Detect intersections of PLC facets.\n");
- printf(" -z Numbers all output items starting from zero.\n");
- printf(" -j Jettison unused vertices from output .node file.\n");
- printf(" -o2 Generates second-order subparametric elements.\n");
- printf(" -f Outputs faces (including non-boundary faces) to .face ");
- printf("file.\n");
- printf(" -e Outputs subsegments to .edge file.\n");
- printf(" -n Outputs tetrahedra neighbors to .neigh file.\n");
- printf(" -g Outputs mesh to .mesh file for viewing by Medit.\n");
- printf(" -G Outputs mesh to .msh file for viewing by Gid.\n");
- printf(" -O Outputs mesh to .off file for viewing by Geomview.\n");
- printf(" -B Suppresses output of boundary information.\n");
- printf(" -N Suppresses output of .node file.\n");
- printf(" -E Suppresses output of .ele file.\n");
- printf(" -F Suppresses output of .face file.\n");
- printf(" -I Suppresses mesh iteration numbers.\n");
- printf(" -C Checks the consistency of the final mesh.\n");
- printf(" -Q Quiet: No terminal output except errors.\n");
- printf(" -V Verbose: Detailed information, more terminal output.\n");
- printf(" -v Prints the version information.\n");
- printf(" -h Help: A brief instruction for using TetGen.\n");
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// usage() Print a brief instruction for using TetGen. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenbehavior::usage()
-{
- printf("TetGen\n");
- printf("A Quality Tetrahedral Mesh Generator and 3D Delaunay ");
- printf("Triangulator\n");
- versioninfo();
- printf("\n");
- printf("Copyright 2002, 2004\n");
- printf("Hang Si\n");
- printf("Rathausstr. 9, 10178 Berlin, Germany\n");
- printf("si@wias-berlin.de\n");
- printf("\n");
- printf("What Can TetGen Do?\n");
- printf("\n");
- printf(" TetGen generates exact Delaunay tetrahedralizations, exact\n");
- printf(" constrained Delaunay tetrahedralizations, and quality ");
- printf("tetrahedral\n meshes. The latter are nicely graded and whose ");
- printf("tetrahedra have\n radius-edge ratio bounded, thus are suitable ");
- printf("for finite element and\n finite volume analysis.\n");
- printf("\n");
- printf("Command Line Syntax:\n");
- printf("\n");
- printf(" Below is the command line syntax of TetGen with a list of ");
- printf("short\n");
- printf(" descriptions. Underscores indicate that numbers may optionally\n");
- printf(" follow certain switches. Do not leave any space between a ");
- printf("switch\n");
- printf(" and its numeric parameter. \'input_file\' contains input data\n");
- printf(" depending on the switches you supplied which may be a ");
- printf(" piecewise\n");
- printf(" linear complex or a list of nodes. File formats and detailed\n");
- printf(" description of command line switches are found in user's ");
- printf("manual.\n");
- printf("\n");
- syntax();
- printf("\n");
- printf("Examples of How to Use TetGen:\n");
- printf("\n");
- printf(" \'tetgen object\' reads vertices from object.node, and writes ");
- printf("their\n Delaunay tetrahedralization to object.1.node and ");
- printf("object.1.ele.\n");
- printf("\n");
- printf(" \'tetgen -p object\' reads a PLC from object.poly or object.");
- printf("smesh (and\n possibly object.node) and writes its constrained ");
- printf("Delaunay\n tetrahedralization to object.1.node, object.1.ele and ");
- printf("object.1.face.\n");
- printf("\n");
- printf(" \'tetgen -pq1.414a.1 object\' reads a PLC from object.poly or\n");
- printf(" object.smesh (and possibly object.node), generates a mesh ");
- printf("whose\n tetrahedra have radius-edge ratio smaller than 1.414 and ");
- printf("have volume\n of 0.1 or less, and writes the mesh to ");
- printf("object.1.node, object.1.ele\n and object.1.face.\n");
- printf("\n");
- printf("Please send bugs/comments to Hang Si <si@wias-berlin.de>\n");
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// parse_commandline() Read the command line, identify switches, and set //
-// up options and file names. //
-// //
-// 'argc' and 'argv' are the same parameters passed to the function main() //
-// of a C/C++ program. They together represent the command line user invoked //
-// from an environment in which TetGen is running. //
-// //
-// When TetGen is invoked from an environment. 'argc' is nonzero, switches //
-// and input filename should be supplied as zero-terminated strings in //
-// argv[0] through argv[argc - 1] and argv[0] shall be the name used to //
-// invoke TetGen, i.e. "tetgen". Switches are previously started with a //
-// dash '-' to identify them from the input filename. //
-// //
-// When TetGen is called from within another program. 'argc' is set to zero. //
-// switches are given in one zero-terminated string (no previous dash is //
-// required.), and 'argv' is a pointer points to this string. No input //
-// filename is required (usually the input data has been directly created by //
-// user in the 'tetgenio' structure). A default filename 'tetgen-tmpfile' //
-// will be created for debugging output purpose. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenbehavior::parse_commandline(int argc, char **argv)
-{
- int startindex;
- int increment;
- int meshnumber;
- int i, j, k;
- char workstring[1024];
-
- // First determine the input style of the switches.
- if (argc == 0) {
- startindex = 0; // Switches are given without a dash.
- argc = 1; // For running the following for-loop once.
- commandline[0] = '\0';
- } else {
- startindex = 1;
- strcpy(commandline, argv[0]);
- strcat(commandline, " ");
- }
-
- for (i = startindex; i < argc; i++) {
- // Remember the command line switches.
- strcat(commandline, argv[i]);
- strcat(commandline, " ");
- if (startindex == 1) {
- // Is this string a filename?
- if (argv[i][0] != '-') {
- strncpy(infilename, argv[i], 1024 - 1);
- infilename[1024 - 1] = '\0';
- // Go to the next string directly.
- continue;
- }
- }
- // Parse the individual switch from the string.
- for (j = startindex; argv[i][j] != '\0'; j++) {
- if (argv[i][j] == 'p') {
- plc = 1;
- } else if (argv[i][j] == 'r') {
- refine = 1;
- } else if (argv[i][j] == 'q') {
- quality = 1;
- if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- k = 0;
- while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- j++;
- workstring[k] = argv[i][j];
- k++;
- }
- workstring[k] = '\0';
- minratio = (REAL) strtod(workstring, (char **) NULL);
- }
- } else if (argv[i][j] == 'a') {
- quality = 1;
- if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- fixedvolume = 1;
- k = 0;
- while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
- (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
- j++;
- workstring[k] = argv[i][j];
- k++;
- }
- workstring[k] = '\0';
- maxvolume = (REAL) strtod(workstring, (char **) NULL);
- if (maxvolume <= 0.0) {
- printf("Error: Number after -a must be greater than zero.\n");
- return false;
- }
- } else {
- varvolume = 1;
- }
- } else if (argv[i][j] == 'A') {
- regionattrib = 1;
- } else if (argv[i][j] == 'i') {
- insertaddpoints = 1;
- } else if (argv[i][j] == 's') {
- removesliver = 1;
- if ((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) {
- k = 0;
- while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- j++;
- workstring[k] = argv[i][j];
- k++;
- }
- workstring[k] = '\0';
- maxdihedral = (REAL) strtod(workstring, (char **) NULL);
- if (maxdihedral <= 0.0 || maxdihedral >= 180.0) {
- printf("Error: Number after -s must between 0 and 180.\n");
- return false;
- }
- } else {
- maxdihedral = 175.0;
- }
- maxdihedral = maxdihedral * 3.1415926535897932 / 180.;
- } else if (argv[i][j] == 'd') {
- detectinter = 1;
- } else if (argv[i][j] == 'c') {
- checkclosure = 1;
- } else if (argv[i][j] == 'z') {
- zeroindex = 1;
- } else if (argv[i][j] == 'j') {
- jettison = 1;
- } else if (argv[i][j] == 'e') {
- edgesout = 1;
- } else if (argv[i][j] == 'n') {
- neighout = 1;
- } else if (argv[i][j] == 'g') {
- meditview = 1;
- } else if (argv[i][j] == 'G') {
- gidview = 1;
- } else if (argv[i][j] == 'O') {
- geomview = 1;
- } else if (argv[i][j] == 'B') {
- nobound = 1;
- } else if (argv[i][j] == 'N') {
- nonodewritten = 1;
- } else if (argv[i][j] == 'E') {
- noelewritten = 1;
- } else if (argv[i][j] == 'F') {
- nofacewritten = 1;
- } else if (argv[i][j] == 'I') {
- noiterationnum = 1;
- } else if (argv[i][j] == 'o') {
- if (argv[i][j + 1] == '2') {
- j++;
- order = 2;
- }
- } else if (argv[i][j] == 'Y') {
- noflip = 1; // nobisect++;
- } else if (argv[i][j] == 'S') {
- if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- k = 0;
- while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
- (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
- j++;
- workstring[k] = argv[i][j];
- k++;
- }
- workstring[k] = '\0';
- steiner = (int) strtol(workstring, (char **) NULL, 0);
- }
- } else if (argv[i][j] == 'P') {
- dopermute = 1;
- if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- k = 0;
- while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
- (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
- j++;
- workstring[k] = argv[i][j];
- k++;
- }
- workstring[k] = '\0';
- srandseed = (int) strtol(workstring, (char **) NULL, 0);
- }
- } else if (argv[i][j] == 'M') {
- nomerge = 1;
- } else if (argv[i][j] == 'T') {
- if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.')) {
- k = 0;
- while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
- (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
- (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
- j++;
- workstring[k] = argv[i][j];
- k++;
- }
- workstring[k] = '\0';
- epsilon = (REAL) strtod(workstring, (char **) NULL);
- }
- if (epsilon <= 0.0) {
- printf("Error: Number after -T must be greater than zero.\n");
- return false;
- }
- } else if (argv[i][j] == 'C') {
- docheck++;
- } else if (argv[i][j] == 'Q') {
- quiet = 1;
- } else if (argv[i][j] == 'V') {
- verbose++;
- } else if (argv[i][j] == 'v') {
- versioninfo();
- exit(0);
- } else if ((argv[i][j] == 'h') || (argv[i][j] == 'H') ||
- (argv[i][j] == '?')) {
- usage();
- exit(0);
- } else {
- printf("Warning: Unknown switch -%c.\n", argv[i][j]);
- }
- }
- }
-
- if (startindex == 0) {
- // Set a temporary filename for debugging output.
- strcpy(infilename, "tetgen-tmpfile");
- } else {
- if (infilename[0] == '\0') {
- // No input file name. Print the syntax and exit.
- syntax();
- exit(0);
- }
- // Recognize the object from file extension if it is available.
- if (!strcmp(&infilename[strlen(infilename) - 5], ".node")) {
- infilename[strlen(infilename) - 5] = '\0';
- object = NODES;
- } else if (!strcmp(&infilename[strlen(infilename) - 5], ".poly")) {
- infilename[strlen(infilename) - 5] = '\0';
- object = POLY;
- plc = 1;
- } else if (!strcmp(&infilename[strlen(infilename) - 6], ".smesh")) {
- infilename[strlen(infilename) - 6] = '\0';
- object = POLY;
- plc = 1;
- } else if (!strcmp(&infilename[strlen(infilename) - 4], ".off")) {
- infilename[strlen(infilename) - 4] = '\0';
- object = OFF;
- plc = 1;
- } else if (!strcmp(&infilename[strlen(infilename) - 4], ".ply")) {
- infilename[strlen(infilename) - 4] = '\0';
- object = PLY;
- plc = 1;
- } else if (!strcmp(&infilename[strlen(infilename) - 4], ".stl")) {
- infilename[strlen(infilename) - 4] = '\0';
- object = STL;
- plc = 1;
- } else if (!strcmp(&infilename[strlen(infilename) - 5], ".mesh")) {
- infilename[strlen(infilename) - 5] = '\0';
- object = MEDIT;
- plc = 1;
- } else if (!strcmp(&infilename[strlen(infilename) - 4], ".ele")) {
- infilename[strlen(infilename) - 4] = '\0';
- object = MESH;
- refine = 1;
- }
- }
- plc = plc || detectinter || checkclosure;
- useshelles = plc || refine || quality;
- goodratio = minratio;
- goodratio *= goodratio;
-
- // Detect improper combinations of switches.
- if (plc && refine) {
- printf("Error: Switch -r cannot use together with -p.\n");
- return false;
- }
- if (refine && (plc || noiterationnum)) {
- printf("Error: Switches %s cannot use together with -r.\n",
- "-p, -d, -c, and -I");
- return false;
- }
- if (detectinter && (quality || insertaddpoints || (order == 2) || neighout
- || checkclosure || docheck)) {
- printf("Error: Switches %s cannot use together with -d.\n",
- "-c, -q, -i, -o2, -n, and -C");
- return false;
- }
- if (checkclosure && (quality || insertaddpoints || (order == 2) || neighout
- || detectinter || docheck)) {
- printf("Error: Switches %s cannot use together with -c.\n",
- "-d, -q, -i, -o2, -n, and -C");
- return false;
- }
-
- // Be careful not to allocate space for element area constraints that
- // will never be assigned any value (other than the default -1.0).
- if (!refine && !plc) {
- varvolume = 0;
- }
- // Be careful not to add an extra attribute to each element unless the
- // input supports it (PLC in, but not refining a preexisting mesh).
- if (refine || !plc) {
- regionattrib = 0;
- }
- // Calculate the goodangle for testing bad subfaces.
- goodangle = cos(minangle * PI / 180.0);
- goodangle *= goodangle;
-
- increment = 0;
- strcpy(workstring, infilename);
- j = 1;
- while (workstring[j] != '\0') {
- if ((workstring[j] == '.') && (workstring[j + 1] != '\0')) {
- increment = j + 1;
- }
- j++;
- }
- meshnumber = 0;
- if (increment > 0) {
- j = increment;
- do {
- if ((workstring[j] >= '0') && (workstring[j] <= '9')) {
- meshnumber = meshnumber * 10 + (int) (workstring[j] - '0');
- } else {
- increment = 0;
- }
- j++;
- } while (workstring[j] != '\0');
- }
- if (noiterationnum) {
- strcpy(outfilename, infilename);
- } else if (increment == 0) {
- strcpy(outfilename, infilename);
- strcat(outfilename, ".1");
- } else {
- workstring[increment] = '%';
- workstring[increment + 1] = 'd';
- workstring[increment + 2] = '\0';
- sprintf(outfilename, workstring, meshnumber + 1);
- }
-
- return true;
-}
-
-//
-// End of class 'tetgenbehavior' implementation
-//
-
-//
-// Begin of class 'tetgenmesh' implementation
-//
-
-//
-// Begin of class 'list', 'memorypool' and 'link' implementation
-//
-
-// Following are predefined compare functions for primitive data types.
-// These functions take two pointers of the corresponding date type,
-// perform the comparation. Return -1, 0 or 1 indicating the default
-// linear order of two operators.
-
-// Compare two 'integers'.
-int tetgenmesh::compare_2_ints(const void* x, const void* y) {
- if (* (int *) x < * (int *) y) {
- return -1;
- } else if (* (int *) x > * (int *) y) {
- return 1;
- } else {
- return 0;
- }
-}
-
-// Compare two 'longs'. Note: in 64-bit machine the 'long' type is 64-bit
-// (8-byte) where the 'int' only 32-bit (4-byte).
-int tetgenmesh::compare_2_longs(const void* x, const void* y) {
- if (* (long *) x < * (long *) y) {
- return -1;
- } else if (* (long *) x > * (long *) y) {
- return 1;
- } else {
- return 0;
- }
-}
-
-// Compare two 'unsigned longs'.
-int tetgenmesh::compare_2_unsignedlongs(const void* x, const void* y) {
- if (* (unsigned long *) x < * (unsigned long *) y) {
- return -1;
- } else if (* (unsigned long *) x > * (unsigned long *) y) {
- return 1;
- } else {
- return 0;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// set_compfunc() Determine the size of primitive data types and set the //
-// corresponding predefined linear order functions. //
-// //
-// 'str' is a zero-end string indicating a primitive data type, like 'int', //
-// 'long' or 'unsigned long'. Every string ending with a '*' is though as a //
-// type of pointer and the type 'unsign long' is used for it. //
-// //
-// When the type of 'str' is determined, the size of this type (in byte) is //
-// returned in 'itbytes', and the pointer of corresponding predefined linear //
-// order functions is returned in 'pcomp'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::set_compfunc(char* str, int* itbytes, compfunc* pcomp)
-{
- // First figure out whether it is a pointer or not.
- if (str[strlen(str) - 1] == '*') {
- *itbytes = sizeof(unsigned long);
- *pcomp = &compare_2_unsignedlongs;
- return;
- }
- // Then determine other types.
- if (strcmp(str, "int") == 0) {
- *itbytes = sizeof(int);
- *pcomp = &compare_2_ints;
- } else if (strcmp(str, "long") == 0) {
- *itbytes = sizeof(long);
- *pcomp = &compare_2_longs;
- } else if (strcmp(str, "unsigned long") == 0) {
- *itbytes = sizeof(unsigned long);
- *pcomp = &compare_2_unsignedlongs;
- } else {
- // It is an unknown type.
- printf("Error in set_compfunc(): unknown type %s.\n", str);
- exit(1);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// listinit() Initialize a list for storing a data type. //
-// //
-// Determine the size of each item, set the maximum size allocated at onece, //
-// set the expand size in case the list is full, and set the linear order //
-// function if it is provided (default is NULL). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::list::
-listinit(int itbytes, compfunc pcomp, int mitems,int exsize)
-{
- assert(itbytes > 0 && mitems > 0 && exsize > 0);
-
- itembytes = itbytes;
- comp = pcomp;
- maxitems = mitems;
- expandsize = exsize;
- base = (char *) malloc(maxitems * itembytes);
- if (base == (char *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- items = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// append() Add a new item at the end of the list. //
-// //
-// A new space at the end of this list will be allocated for storing the new //
-// item. If the memory is not sufficient, reallocation will be performed. If //
-// 'appitem' is not NULL, the contents of this pointer will be copied to the //
-// new allocated space. Returns the pointer to the new allocated space. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::list::append(void *appitem)
-{
- // Do we have enough space?
- if (items == maxitems) {
- char* newbase = (char *) realloc(base, (maxitems + expandsize) *
- itembytes);
- if (newbase == (char *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- base = newbase;
- maxitems += expandsize;
- }
- if (appitem != (void *) NULL) {
- memcpy(base + items * itembytes, appitem, itembytes);
- }
- items++;
- return (void *) (base + (items - 1) * itembytes);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insert() Insert an item before 'pos' (range from 0 to items - 1). //
-// //
-// A new space will be inserted at the position 'pos', that is, items lie //
-// after pos (including the item at pos) will be moved one space downwords. //
-// If 'insitem' is not NULL, its contents will be copied into the new //
-// inserted space. Return a pointer to the new inserted space. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::list::insert(int pos, void* insitem)
-{
- if (pos >= items) {
- return append(insitem);
- }
- // Do we have enough space.
- if (items == maxitems) {
- char* newbase = (char *) realloc(base, (maxitems + expandsize) *
- itembytes);
- if (newbase == (char *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- base = newbase;
- maxitems += expandsize;
- }
- // Do block move.
- memmove(base + (pos + 1) * itembytes, // dest
- base + pos * itembytes, // src
- (items - pos) * itembytes); // size in bytes
- // Insert the item.
- if (insitem != (void *) NULL) {
- memcpy(base + pos * itembytes, insitem, itembytes);
- }
- items++;
- return (void *) (base + pos * itembytes);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// del() Delete an item at 'pos' (range from 0 to items - 1). //
-// //
-// The space at 'pos' will be overlapped by other items, that is, items lie //
-// after pos will be moved one space upwords. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::list::del(int pos)
-{
- // If 'pos' is the last itemof the list, nothing need to do.
- if (pos >= 0 && pos < items - 1) {
- // Do block move.
- memmove(base + pos * itembytes, // dest
- base + (pos + 1) * itembytes, // src
- (items - pos - 1) * itembytes);
- }
- if (items > 0) {
- items--;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// hasitem() Search in this list to find if 'checkitem' exists. //
-// //
-// This routine assumes that a linear order function has been set. It loops //
-// through the entire list, compares each item to 'checkitem'. If it exists, //
-// return its position (between 0 to items - 1), otherwise, return -1. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-int tetgenmesh::list::hasitem(void* checkitem)
-{
- int i;
-
- for (i = 0; i < items; i++) {
- if (comp != (compfunc) NULL) {
- if ((* comp)((void *)(base + i * itembytes), checkitem) == 0) {
- return i;
- }
- }
- }
- return -1;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// remove() Remove an item (indicated by its pointer) from the list. //
-// //
-// If the list contains more than one copy of the pointer, only the first //
-// copy is removed. The returned value is the index of the removed item. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-int tetgenmesh::list::remove(void* remitem)
-{
- int pos = hasitem(remitem);
- if (pos != -1) {
- del(pos);
- }
- return pos;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// sort() Sort the items with respect to a linear order function. //
-// //
-// Uses QuickSort routines (qsort) of the standard C/C++ library (stdlib.h). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::list::sort()
-{
- qsort((void *) base, (size_t) items, (size_t) itembytes, comp);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// memorypool() The constructors of memorypool. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::memorypool::memorypool()
-{
- firstblock = nowblock = (void **) NULL;
- nextitem = (void *) NULL;
- deaditemstack = (void *) NULL;
- pathblock = (void **) NULL;
- pathitem = (void *) NULL;
- itemwordtype = POINTER;
- alignbytes = 0;
- itembytes = itemwords = 0;
- itemsperblock = 0;
- items = maxitems = 0l;
- unallocateditems = 0;
- pathitemsleft = 0;
-}
-
-tetgenmesh::memorypool::
-memorypool(int bytecount, int itemcount, enum wordtype wtype, int alignment)
-{
- poolinit(bytecount, itemcount, wtype, alignment);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// ~memorypool() Free to the operating system all memory taken by a pool. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::memorypool::~memorypool()
-{
- while (firstblock != (void **) NULL) {
- nowblock = (void **) *(firstblock);
- free(firstblock);
- firstblock = nowblock;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// poolinit() Initialize a pool of memory for allocation of items. //
-// //
-// A `pool' is created whose records have size at least `bytecount'. Items //
-// will be allocated in `itemcount'-item blocks. Each item is assumed to be //
-// a collection of words, and either pointers or floating-point values are //
-// assumed to be the "primary" word type. (The "primary" word type is used //
-// to determine alignment of items.) If `alignment' isn't zero, all items //
-// will be `alignment'-byte aligned in memory. `alignment' must be either a //
-// multiple or a factor of the primary word size; powers of two are safe. //
-// `alignment' is normally used to create a few unused bits at the bottom of //
-// each item's pointer, in which information may be stored. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::memorypool::
-poolinit(int bytecount, int itemcount, enum wordtype wtype, int alignment)
-{
- int wordsize;
-
- // Initialize values in the pool.
- itemwordtype = wtype;
- wordsize = (itemwordtype == POINTER) ? sizeof(void *) : sizeof(REAL);
- // Find the proper alignment, which must be at least as large as:
- // - The parameter `alignment'.
- // - The primary word type, to avoid unaligned accesses.
- // - sizeof(void *), so the stack of dead items can be maintained
- // without unaligned accesses.
- if (alignment > wordsize) {
- alignbytes = alignment;
- } else {
- alignbytes = wordsize;
- }
- if (sizeof(void *) > alignbytes) {
- alignbytes = sizeof(void *);
- }
- itemwords = ((bytecount + alignbytes - 1) / alignbytes)
- * (alignbytes / wordsize);
- itembytes = itemwords * wordsize;
- itemsperblock = itemcount;
-
- // Allocate a block of items. Space for `itemsperblock' items and one
- // pointer (to point to the next block) are allocated, as well as space
- // to ensure alignment of the items.
- firstblock = (void **) malloc(itemsperblock * itembytes + sizeof(void *)
- + alignbytes);
- if (firstblock == (void **) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- // Set the next block pointer to NULL.
- *(firstblock) = (void *) NULL;
- restart();
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// restart() Deallocate all items in this pool. //
-// //
-// The pool is returned to its starting state, except that no memory is //
-// freed to the operating system. Rather, the previously allocated blocks //
-// are ready to be reused. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::memorypool::restart()
-{
- unsigned long alignptr;
-
- items = 0;
- maxitems = 0;
-
- // Set the currently active block.
- nowblock = firstblock;
- // Find the first item in the pool. Increment by the size of (void *).
- alignptr = (unsigned long) (nowblock + 1);
- // Align the item on an `alignbytes'-byte boundary.
- nextitem = (void *)
- (alignptr + (unsigned long) alignbytes -
- (alignptr % (unsigned long) alignbytes));
- // There are lots of unallocated items left in this block.
- unallocateditems = itemsperblock;
- // The stack of deallocated items is empty.
- deaditemstack = (void *) NULL;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// alloc() Allocate space for an item. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::memorypool::alloc()
-{
- void *newitem;
- void **newblock;
- unsigned long alignptr;
-
- // First check the linked list of dead items. If the list is not
- // empty, allocate an item from the list rather than a fresh one.
- if (deaditemstack != (void *) NULL) {
- newitem = deaditemstack; // Take first item in list.
- deaditemstack = * (void **) deaditemstack;
- } else {
- // Check if there are any free items left in the current block.
- if (unallocateditems == 0) {
- // Check if another block must be allocated.
- if (*nowblock == (void *) NULL) {
- // Allocate a new block of items, pointed to by the previous block.
- newblock = (void **) malloc(itemsperblock * itembytes + sizeof(void *)
- + alignbytes);
- if (newblock == (void **) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- *nowblock = (void *) newblock;
- // The next block pointer is NULL.
- *newblock = (void *) NULL;
- }
- // Move to the new block.
- nowblock = (void **) *nowblock;
- // Find the first item in the block.
- // Increment by the size of (void *).
- alignptr = (unsigned long) (nowblock + 1);
- // Align the item on an `alignbytes'-byte boundary.
- nextitem = (void *)
- (alignptr + (unsigned long) alignbytes -
- (alignptr % (unsigned long) alignbytes));
- // There are lots of unallocated items left in this block.
- unallocateditems = itemsperblock;
- }
- // Allocate a new item.
- newitem = nextitem;
- // Advance `nextitem' pointer to next free item in block.
- if (itemwordtype == POINTER) {
- nextitem = (void *) ((void **) nextitem + itemwords);
- } else {
- nextitem = (void *) ((REAL *) nextitem + itemwords);
- }
- unallocateditems--;
- maxitems++;
- }
- items++;
- return newitem;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// dealloc() Deallocate space for an item. //
-// //
-// The deallocated space is stored in a queue for later reuse. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::memorypool::dealloc(void *dyingitem)
-{
- // Push freshly killed item onto stack.
- *((void **) dyingitem) = deaditemstack;
- deaditemstack = dyingitem;
- items--;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// traversalinit() Prepare to traverse the entire list of items. //
-// //
-// This routine is used in conjunction with traverse(). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::memorypool::traversalinit()
-{
- unsigned long alignptr;
-
- // Begin the traversal in the first block.
- pathblock = firstblock;
- // Find the first item in the block. Increment by the size of (void *).
- alignptr = (unsigned long) (pathblock + 1);
- // Align with item on an `alignbytes'-byte boundary.
- pathitem = (void *)
- (alignptr + (unsigned long) alignbytes -
- (alignptr % (unsigned long) alignbytes));
- // Set the number of items left in the current block.
- pathitemsleft = itemsperblock;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// traverse() Find the next item in the list. //
-// //
-// This routine is used in conjunction with traversalinit(). Be forewarned //
-// that this routine successively returns all items in the list, including //
-// deallocated ones on the deaditemqueue. It's up to you to figure out which //
-// ones are actually dead. It can usually be done more space-efficiently by //
-// a routine that knows something about the structure of the item. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::memorypool::traverse()
-{
- void *newitem;
- unsigned long alignptr;
-
- // Stop upon exhausting the list of items.
- if (pathitem == nextitem) {
- return (void *) NULL;
- }
- // Check whether any untraversed items remain in the current block.
- if (pathitemsleft == 0) {
- // Find the next block.
- pathblock = (void **) *pathblock;
- // Find the first item in the block. Increment by the size of (void *).
- alignptr = (unsigned long) (pathblock + 1);
- // Align with item on an `alignbytes'-byte boundary.
- pathitem = (void *)
- (alignptr + (unsigned long) alignbytes -
- (alignptr % (unsigned long) alignbytes));
- // Set the number of items left in the current block.
- pathitemsleft = itemsperblock;
- }
- newitem = pathitem;
- // Find the next item in the block.
- if (itemwordtype == POINTER) {
- pathitem = (void *) ((void **) pathitem + itemwords);
- } else {
- pathitem = (void *) ((REAL *) pathitem + itemwords);
- }
- pathitemsleft--;
- return newitem;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// linkinit() Initialize a link for storing items. //
-// //
-// The input parameters are the size of each item, a pointer of a linear //
-// order function and the number of items allocating in one memory bulk. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::link::linkinit(int bytecount, compfunc pcomp, int itemcount)
-{
- assert(bytecount > 0 && itemcount > 0);
-
- // Remember the real size of each item.
- linkitembytes = bytecount;
- // Set the linear order function for this link.
- comp = pcomp;
-
- // Call the constructor of 'memorypool' to initialize its variables.
- // like: itembytes, itemwords, items, ... Each node has size
- // bytecount + 2 * sizeof(void **), and total 'itemcount + 2' (because
- // link has additional two nodes 'head' and 'tail').
- poolinit(bytecount + 2 * sizeof(void **), itemcount + 2, POINTER, 0);
-
- // Initial state of this link.
- head = (void **) alloc();
- tail = (void **) alloc();
- *head = (void *) tail;
- *(head + 1) = NULL;
- *tail = NULL;
- *(tail + 1) = (void *) head;
- nextlinkitem = *head;
- curpos = 1;
- linkitems = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// clear() Deallocate all nodes in this link. //
-// //
-// The link is returned to its starting state, except that no memory is //
-// freed to the operating system. Rather, the previously allocated blocks //
-// are ready to be reused. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::link::clear()
-{
- // Reset the pool.
- restart();
-
- // Initial state of this link.
- head = (void **) alloc();
- tail = (void **) alloc();
- *head = (void *) tail;
- *(head + 1) = NULL;
- *tail = NULL;
- *(tail + 1) = (void *) head;
- nextlinkitem = *head;
- curpos = 1;
- linkitems = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// move() Causes 'nextlinkitem' to traverse the specified number of nodes,//
-// updates 'curpos' to be the node to which 'nextlinkitem' points. //
-// //
-// 'numberofnodes' is a number indicating how many nodes need be traversed //
-// (not counter the current node) need be traversed. It may be positive(move //
-// forward) or negative (move backward). Return TRUE if it is successful. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::link::move(int numberofnodes)
-{
- void **nownode;
- int i;
-
- nownode = (void **) nextlinkitem;
- if (numberofnodes > 0) {
- // Move forward.
- i = 0;
- while ((i < numberofnodes) && *nownode) {
- nownode = (void **) *nownode;
- i++;
- }
- if (*nownode == NULL) return false;
- nextlinkitem = (void *) nownode;
- curpos += numberofnodes;
- } else if (numberofnodes < 0) {
- // Move backward.
- i = 0;
- numberofnodes = -numberofnodes;
- while ((i < numberofnodes) && *(nownode + 1)) {
- nownode = (void **) *(nownode + 1);
- i++;
- }
- if (*(nownode + 1) == NULL) return false;
- nextlinkitem = (void *) nownode;
- curpos -= numberofnodes;
- }
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// locate() Locates the node at the specified position. //
-// //
-// The number 'pos' (between 1 and 'linkitems') indicates the location. This //
-// routine first decides the shortest path traversing from 'curpos' to 'pos',//
-// i.e., from head, tail or 'curpos'. Routine 'move()' is called to really //
-// traverse the link. If success, 'nextlinkitem' points to the node, 'curpos'//
-// and 'pos' are equal. Otherwise, return FALSE. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::link::locate(int pos)
-{
- int headdist, taildist, curdist;
- int abscurdist, mindist;
-
- if (pos < 1 || pos > linkitems) return false;
-
- headdist = pos - 1;
- taildist = linkitems - pos;
- curdist = pos - curpos;
- abscurdist = curdist >= 0 ? curdist : -curdist;
-
- if (headdist > taildist) {
- if (taildist > abscurdist) {
- mindist = curdist;
- } else {
- // taildist <= abs(curdist)
- mindist = -taildist;
- goend();
- }
- } else {
- // headdist <= taildist
- if (headdist > abscurdist) {
- mindist = curdist;
- } else {
- // headdist <= abs(curdist)
- mindist = headdist;
- rewind();
- }
- }
-
- return move(mindist);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// add() Add a node at the end of this link. //
-// //
-// A new node is appended to the end of the link. If 'newitem' is not NULL, //
-// its conents will be copied to the data slot of the new node. Returns the //
-// pointer to the newest added node. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::link::add(void* newitem)
-{
- void **newnode = tail;
- if (newitem != (void *) NULL) {
- memcpy((void *)(newnode + 2), newitem, linkitembytes);
- }
- tail = (void **) alloc();
- *tail = NULL;
- *newnode = (void*) tail;
- *(tail + 1) = (void*) newnode;
- linkitems++;
- return (void *)(newnode + 2);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insert() Inserts a node before the specified position. //
-// //
-// 'pos' (between 1 and 'linkitems') indicates the inserting position. This //
-// routine inserts a new node before the node of 'pos'. If 'newitem' is not //
-// NULL, its conents will be copied into the data slot of the new node. If //
-// 'pos' is larger than 'linkitems', it is equal as 'add()'. A pointer to //
-// the newest inserted item is returned. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::link::insert(int pos, void* insitem)
-{
- if (!locate(pos)) {
- return add(insitem);
- }
-
- void **nownode = (void **) nextlinkitem;
-
- // Insert a node before 'nownode'.
- void **newnode = (void **) alloc();
- if (insitem != (void *) NULL) {
- memcpy((void *)(newnode + 2), insitem, linkitembytes);
- }
-
- *(void **)(*(nownode + 1)) = (void *) newnode;
- *newnode = (void *) nownode;
- *(newnode + 1) = *(nownode + 1);
- *(nownode + 1) = (void *) newnode;
-
- linkitems++;
-
- nextlinkitem = (void *) newnode;
- return (void *)(newnode + 2);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// del() Delete a node containing the given pointer. //
-// //
-// Returns a pointer of the deleted data. If you try to delete a non-existed //
-// node (e.g. link is empty or a wrong index is given) return NULL. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::link::del(void* delitem)
-{
- void **deadnode = (void **) ((void **) delitem - 2);
-
- // now delete the nownode
- void **nextnode = (void **) *deadnode;
- void **prevnode = (void **) *(deadnode + 1);
- *prevnode = (void *) nextnode;
- *(nextnode + 1) = (void *) prevnode;
-
- dealloc((void *) deadnode);
- linkitems--;
-
- nextlinkitem = (void *) nextnode;
- return (void *)(deadnode + 2);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// del() Delete a node at the specified position. //
-// //
-// 'pos' between 1 and 'linkitems'. Returns a pointer of the deleted data. //
-// If you try to delete a non-existed node (e.g. link is empty or a wrong //
-// index is given) return NULL. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::link::del(int pos)
-{
- if (!locate(pos) || (linkitems == 0)) {
- return (void *) NULL;
- }
- return del((void *) ((void **) nextlinkitem + 2));
- /*
- void **deadnode = (void **)nextlinkitem;
-
- // now delete the nownode
- void **nextnode = (void **) *deadnode;
- void **prevnode = (void **) *(deadnode + 1);
- *prevnode = (void *) nextnode;
- *(nextnode + 1) = (void *) prevnode;
-
- dealloc((void *) deadnode);
- linkitems--;
-
- nextlinkitem = (void *) nextnode;
- return (void *)(deadnode + 2);
- */
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getitem() The link traversal routine. //
-// //
-// Returns the node to which 'nextlinkitem' points. Returns a 'NULL' if the //
-// end of the link is reaching. Both 'nextlinkitem' and 'curpos' will be //
-// updated after this operation. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::link::getitem()
-{
- if (nextlinkitem == (void *) tail) return NULL;
- void **nownode = (void **) nextlinkitem;
- nextlinkitem = *nownode;
- curpos += 1;
- return (void *)(nownode + 2);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getnitem() Returns the node at a specified position. //
-// //
-// 'pos' between 1 and 'linkitems'. After this operation, 'nextlinkitem' and //
-// 'curpos' will be updated to indicate this node. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void* tetgenmesh::link::getnitem(int pos)
-{
- if (!locate(pos)) return NULL;
- return (void *)((void **) nextlinkitem + 2);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// hasitem() Search in this link to find if 'checkitem' exists. //
-// //
-// If 'checkitem' exists, return its position (between 1 to 'linkitems'), //
-// otherwise, return -1. This routine requires the linear order function has //
-// been set. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-int tetgenmesh::link::hasitem(void* checkitem)
-{
- void *pathitem;
- int count;
-
- rewind();
- pathitem = getitem();
- count = 0;
- while (pathitem) {
- count ++;
- if (comp) {
- if ((* comp)(pathitem, checkitem) == 0) {
- return count;
- }
- }
- pathitem = getitem();
- }
- return -1;
-}
-
-//
-// End of class 'list', 'memorypool' and 'link' implementation
-//
-
-//
-// Begin of mesh manipulation primitives
-//
-
-//
-// Begin of tables initialization.
-//
-
-// For enumerating three edges of a triangle.
-
-int tetgenmesh::plus1mod3[3] = {1, 2, 0};
-int tetgenmesh::minus1mod3[3] = {2, 0, 1};
-
-// Table 've' takes an edge version as input, returns the next edge version
-// in the same edge ring.
-
-int tetgenmesh::ve[6] = { 2, 5, 4, 1, 0, 3 };
-
-// Tables 'vo', 'vd' and 'va' take an edge version, return the positions of
-// the origin, destination and apex in the triangle.
-
-int tetgenmesh::vo[6] = { 0, 1, 1, 2, 2, 0 };
-int tetgenmesh::vd[6] = { 1, 0, 2, 1, 0, 2 };
-int tetgenmesh::va[6] = { 2, 2, 0, 0, 1, 1 };
-
-// The following tables are for tetrahedron primitives (operate on trifaces).
-
-// For 'org()', 'dest()' and 'apex()'. Use 'loc' as the first index and
-// 'ver' as the second index.
-
-int tetgenmesh::locver2org[4][6] = {
- 0, 1, 1, 2, 2, 0,
- 0, 3, 3, 1, 1, 0,
- 1, 3, 3, 2, 2, 1,
- 2, 3, 3, 0, 0, 2
-};
-int tetgenmesh::locver2dest[4][6] = {
- 1, 0, 2, 1, 0, 2,
- 3, 0, 1, 3, 0, 1,
- 3, 1, 2, 3, 1, 2,
- 3, 2, 0, 3, 2, 0
-};
-int tetgenmesh::locver2apex[4][6] = {
- 2, 2, 0, 0, 1, 1,
- 1, 1, 0, 0, 3, 3,
- 2, 2, 1, 1, 3, 3,
- 0, 0, 2, 2, 3, 3
-};
-
-// For oppo() primitives, use 'loc' as the index.
-
-int tetgenmesh::loc2oppo[4] = { 3, 2, 0, 1 };
-
-// For fnext() primitive. Use 'loc' as the first index and 'ver' as the
-// second index. Returns a new 'loc' and new 'ver' in an array. (It is
-// only valid for edge version equals one of {0, 2, 4}.)
-
-int tetgenmesh::locver2nextf[4][6][2] = {
- { {1, 5}, {-1, -1}, {2, 5}, {-1, -1}, {3, 5}, {-1, -1} },
- { {3, 3}, {-1, -1}, {2, 1}, {-1, -1}, {0, 1}, {-1, -1} },
- { {1, 3}, {-1, -1}, {3, 1}, {-1, -1}, {0, 3}, {-1, -1} },
- { {2, 3}, {-1, -1}, {1, 1}, {-1, -1}, {0, 5}, {-1, -1} }
-};
-
-//
-// End of tables initialization.
-//
-
-// Some macros for convenience
-
-#define Div2 >> 1
-#define Mod2 & 01
-
-// NOTE: These bit operators should only be used in macros below.
-
-// Get orient(Range from 0 to 2) from face version(Range from 0 to 5).
-
-#define Orient(V) ((V) Div2)
-
-// Determine edge ring(0 or 1) from face version(Range from 0 to 5).
-
-#define EdgeRing(V) ((V) Mod2)
-
-//
-// Begin of primitives for tetrahedra
-//
-
-// Each tetrahedron contains four pointers to its neighboring tetrahedra,
-// with face indices. To save memory, both information are kept in a
-// single pointer. To make this possible, all tetrahedra are aligned to
-// eight-byte boundaries, so that the last three bits of each pointer are
-// zeros. A face index (in the range 0 to 3) is compressed into the last
-// two bits of each pointer by the function 'encode()'. The function
-// 'decode()' decodes a pointer, extracting a face index and a pointer to
-// the beginning of a tetrahedron.
-
-inline void tetgenmesh::decode(tetrahedron ptr, triface& t) {
- t.loc = (int) ((unsigned long) (ptr) & (unsigned long) 3l);
- t.tet = (tetrahedron *) ((unsigned long) (ptr) & ~(unsigned long) 7l);
-}
-
-inline tetgenmesh::tetrahedron tetgenmesh::encode(triface& t) {
- return (tetrahedron) ((unsigned long) t.tet | (unsigned long) t.loc);
-}
-
-// sym() finds the abutting tetrahedron on the same face.
-
-inline void tetgenmesh::sym(triface& t1, triface& t2) {
- tetrahedron ptr = t1.tet[t1.loc];
- decode(ptr, t2);
-}
-
-inline void tetgenmesh::symself(triface& t) {
- tetrahedron ptr = t.tet[t.loc];
- decode(ptr, t);
-}
-
-// Bond two tetrahedra together at their faces.
-
-inline void tetgenmesh::bond(triface& t1, triface& t2) {
- t1.tet[t1.loc] = encode(t2);
- t2.tet[t2.loc] = encode(t1);
-}
-
-// Dissolve a bond (from one side). Note that the other tetrahedron will
-// still think it is connected to this tetrahedron. Usually, however,
-// the other tetrahedron is being deleted entirely, or bonded to another
-// tetrahedron, so it doesn't matter.
-
-inline void tetgenmesh::dissolve(triface& t) {
- t.tet[t.loc] = (tetrahedron) dummytet;
-}
-
-// These primitives determine or set the origin, destination, apex or
-// opposition of a tetrahedron with respect to 'loc' and 'ver'.
-
-inline tetgenmesh::point tetgenmesh::org(triface& t) {
- return (point) t.tet[locver2org[t.loc][t.ver] + 4];
-}
-
-inline tetgenmesh::point tetgenmesh::dest(triface& t) {
- return (point) t.tet[locver2dest[t.loc][t.ver] + 4];
-}
-
-inline tetgenmesh::point tetgenmesh::apex(triface& t) {
- return (point) t.tet[locver2apex[t.loc][t.ver] + 4];
-}
-
-inline tetgenmesh::point tetgenmesh::oppo(triface& t) {
- return (point) t.tet[loc2oppo[t.loc] + 4];
-}
-
-inline void tetgenmesh::setorg(triface& t, point pointptr) {
- t.tet[locver2org[t.loc][t.ver] + 4] = (tetrahedron) pointptr;
-}
-
-inline void tetgenmesh::setdest(triface& t, point pointptr) {
- t.tet[locver2dest[t.loc][t.ver] + 4] = (tetrahedron) pointptr;
-}
-
-inline void tetgenmesh::setapex(triface& t, point pointptr) {
- t.tet[locver2apex[t.loc][t.ver] + 4] = (tetrahedron) pointptr;
-}
-
-inline void tetgenmesh::setoppo(triface& t, point pointptr) {
- t.tet[loc2oppo[t.loc] + 4] = (tetrahedron) pointptr;
-}
-
-// These primitives were drived from Mucke's triangle-edge data structure
-// to change face-edge relation in a tetrahedron (esym, enext and enext2)
-// or between two tetrahedra (fnext).
-
-// If e0 = e(i, j), e1 = e(j, i), that is e0 and e1 are the two directions
-// of the same undirected edge of a face. e0.sym() = e1 and vice versa.
-
-inline void tetgenmesh::esym(triface& t1, triface& t2) {
- t2.tet = t1.tet;
- t2.loc = t1.loc;
- t2.ver = t1.ver + (EdgeRing(t1.ver) ? -1 : 1);
-}
-
-inline void tetgenmesh::esymself(triface& t) {
- t.ver += (EdgeRing(t.ver) ? -1 : 1);
-}
-
-// If e0 and e1 are both in the same edge ring of a face, e1 = e0.enext().
-
-inline void tetgenmesh::enext(triface& t1, triface& t2) {
- t2.tet = t1.tet;
- t2.loc = t1.loc;
- t2.ver = ve[t1.ver];
-}
-
-inline void tetgenmesh::enextself(triface& t) {
- t.ver = ve[t.ver];
-}
-
-// enext2() is equal to e2 = e0.enext().enext()
-
-inline void tetgenmesh::enext2(triface& t1, triface& t2) {
- t2.tet = t1.tet;
- t2.loc = t1.loc;
- t2.ver = ve[ve[t1.ver]];
-}
-
-inline void tetgenmesh::enext2self(triface& t) {
- t.ver = ve[ve[t.ver]];
-}
-
-// If f0 and f1 are both in the same face ring of a face, f1 = f0.fnext().
-// If f1 exists, return true. Otherwise, return false, i.e., f0 is a
-// boundary or hull face.
-
-inline bool tetgenmesh::fnext(triface& t1, triface& t2) {
- return getnextface(&t1, &t2);
-}
-
-inline bool tetgenmesh::fnextself(triface& t) {
- return getnextface(&t, NULL);
-}
-
-// enextfnext() and enext2fnext() are combination primitives of enext(),
-// enext2() and fnext().
-
-inline void tetgenmesh::enextfnext(triface& t1, triface& t2) {
- enext(t1, t2);
- fnextself(t2);
-}
-
-inline void tetgenmesh::enextfnextself(triface& t) {
- enextself(t);
- fnextself(t);
-}
-
-inline void tetgenmesh::enext2fnext(triface& t1, triface& t2) {
- enext2(t1, t2);
- fnextself(t2);
-}
-
-inline void tetgenmesh::enext2fnextself(triface& t) {
- enext2self(t);
- fnextself(t);
-}
-
-// Primitives to infect or cure a tetrahedron with the virus. The last
-// third bit of the pointer is marked for infection. These rely on the
-// assumption that all tetrahedron are aligned to eight-byte boundaries.
-
-inline void tetgenmesh::infect(triface& t) {
- t.tet[0] = (tetrahedron) ((unsigned long) t.tet[0] | (unsigned long) 4l);
-}
-
-inline void tetgenmesh::uninfect(triface& t) {
- t.tet[0] = (tetrahedron) ((unsigned long) t.tet[0] & ~ (unsigned long) 4l);
-}
-
-// Test a tetrahedron for viral infection.
-
-inline bool tetgenmesh::infected(triface& t) {
- return (((unsigned long) t.tet[0] & (unsigned long) 4l) != 0);
-}
-
-// Check or set a tetrahedron's attributes.
-
-inline REAL tetgenmesh::elemattribute(tetrahedron* ptr, int attnum) {
- return ((REAL *) (ptr))[elemattribindex + attnum];
-}
-
-inline void tetgenmesh::
-setelemattribute(tetrahedron* ptr, int attnum, REAL value){
- ((REAL *) (ptr))[elemattribindex + attnum] = value;
-}
-
-// Check or set a tetrahedron's maximum volume bound.
-
-inline REAL tetgenmesh::volumebound(tetrahedron* ptr) {
- return ((REAL *) (ptr))[volumeboundindex];
-}
-
-inline void tetgenmesh::setvolumebound(tetrahedron* ptr, REAL value) {
- ((REAL *) (ptr))[volumeboundindex] = value;
-}
-
-//
-// End of primitives for tetrahedra
-//
-
-//
-// Begin of primitives for subfaces/subsegments
-//
-
-// Each subface contains three pointers to its neighboring subfaces, with
-// edge versions. To save memory, both information are kept in a single
-// pointer. To make this possible, all subfaces are aligned to eight-byte
-// boundaries, so that the last three bits of each pointer are zeros. An
-// edge version (in the range 0 to 5) is compressed into the last three
-// bits of each pointer by 'sencode()'. 'sdecode()' decodes a pointer,
-// extracting an edge version and a pointer to the beginning of a subface.
-
-inline void tetgenmesh::sdecode(shellface sptr, face& s) {
- s.shver = (int) ((unsigned long) (sptr) & (unsigned long) 7l);
- s.sh = (shellface *) ((unsigned long) (sptr) & ~ (unsigned long) 7l);
-}
-
-inline tetgenmesh::shellface tetgenmesh::sencode(face& s) {
- return (shellface) ((unsigned long) s.sh | (unsigned long) s.shver);
-}
-
-// spivot() finds the other subface (from this subface) that shares the
-// same edge.
-
-inline void tetgenmesh::spivot(face& s1, face& s2) {
- shellface sptr = s1.sh[Orient(s1.shver)];
- sdecode(sptr, s2);
-}
-
-inline void tetgenmesh::spivotself(face& s) {
- shellface sptr = s.sh[Orient(s.shver)];
- sdecode(sptr, s);
-}
-
-// sbond() bonds two subfaces together, i.e., after bonding, both faces
-// are pointing to each other.
-
-inline void tetgenmesh::sbond(face& s1, face& s2) {
- s1.sh[Orient(s1.shver)] = sencode(s2);
- s2.sh[Orient(s2.shver)] = sencode(s1);
-}
-
-// sbond1() only bonds s2 to s1, i.e., after bonding, s1 is pointing to s2,
-// but s2 is not pointing to s1.
-
-inline void tetgenmesh::sbond1(face& s1, face& s2) {
- s1.sh[Orient(s1.shver)] = sencode(s2);
-}
-
-// Dissolve a subface bond (from one side). Note that the other subface
-// will still think it's connected to this subface.
-
-inline void tetgenmesh::sdissolve(face& s) {
- s.sh[Orient(s.shver)] = (shellface) dummysh;
-}
-
-// These primitives determine or set the origin, destination, or apex
-// of a subface with respect to the edge version.
-
-inline tetgenmesh::point tetgenmesh::sorg(face& s) {
- return (point) s.sh[3 + vo[s.shver]];
-}
-
-inline tetgenmesh::point tetgenmesh::sdest(face& s) {
- return (point) s.sh[3 + vd[s.shver]];
-}
-
-inline tetgenmesh::point tetgenmesh::sapex(face& s) {
- return (point) s.sh[3 + va[s.shver]];
-}
-
-inline void tetgenmesh::setsorg(face& s, point pointptr) {
- s.sh[3 + vo[s.shver]] = (shellface) pointptr;
-}
-
-inline void tetgenmesh::setsdest(face& s, point pointptr) {
- s.sh[3 + vd[s.shver]] = (shellface) pointptr;
-}
-
-inline void tetgenmesh::setsapex(face& s, point pointptr) {
- s.sh[3 + va[s.shver]] = (shellface) pointptr;
-}
-
-// These primitives were drived from Mucke[2]'s triangle-edge data structure
-// to change face-edge relation in a subface (sesym, senext and senext2).
-
-inline void tetgenmesh::sesym(face& s1, face& s2) {
- s2.sh = s1.sh;
- s2.shver = s1.shver + (EdgeRing(s1.shver) ? -1 : 1);
-}
-
-inline void tetgenmesh::sesymself(face& s) {
- s.shver += (EdgeRing(s.shver) ? -1 : 1);
-}
-
-inline void tetgenmesh::senext(face& s1, face& s2) {
- s2.sh = s1.sh;
- s2.shver = ve[s1.shver];
-}
-
-inline void tetgenmesh::senextself(face& s) {
- s.shver = ve[s.shver];
-}
-
-inline void tetgenmesh::senext2(face& s1, face& s2) {
- s2.sh = s1.sh;
- s2.shver = ve[ve[s1.shver]];
-}
-
-inline void tetgenmesh::senext2self(face& s) {
- s.shver = ve[ve[s.shver]];
-}
-
-// If f0 and f1 are both in the same face ring, then f1 = f0.fnext(),
-
-inline void tetgenmesh::sfnext(face& s1, face& s2) {
- getnextsface(&s1, &s2);
-}
-
-inline void tetgenmesh::sfnextself(face& s) {
- getnextsface(&s, NULL);
-}
-
-// These primitives read or set a pointer of the badface structure. The
-// pointer is stored sh[11].
-
-inline tetgenmesh::badface* tetgenmesh::shell2badface(face& s) {
- return (badface*) s.sh[11];
-}
-
-inline void tetgenmesh::setshell2badface(face& s, badface* value) {
- s.sh[11] = (shellface) value;
-}
-
-// Check or set a subface's maximum area bound.
-
-inline REAL tetgenmesh::areabound(face& s) {
- return ((REAL *) (s.sh))[areaboundindex];
-}
-
-inline void tetgenmesh::setareabound(face& s, REAL value) {
- ((REAL *) (s.sh))[areaboundindex] = value;
-}
-
-// These primitives read or set a shell marker. Shell markers are used
-// to hold user boundary information.
-
-inline int tetgenmesh::shellmark(face& s) {
- return ((int *) (s.sh))[shmarkindex];
-}
-
-inline void tetgenmesh::setshellmark(face& s, int value) {
- ((int *) (s.sh))[shmarkindex] = value;
-}
-
-// These primitives set or read the type of the subface or subsegment.
-
-inline enum tetgenmesh::shestype tetgenmesh::shelltype(face& s) {
- return (enum shestype) ((int *) (s.sh))[shmarkindex + 1];
-}
-
-inline void tetgenmesh::setshelltype(face& s, enum shestype value) {
- ((int *) (s.sh))[shmarkindex + 1] = (int) value;
-}
-
-// Primitives to infect or cure a subface with the virus. These rely on the
-// assumption that all tetrahedra are aligned to eight-byte boundaries.
-
-inline void tetgenmesh::sinfect(face& s) {
- s.sh[6] = (shellface) ((unsigned long) s.sh[6] | (unsigned long) 4l);
-}
-
-inline void tetgenmesh::suninfect(face& s) {
- s.sh[6] = (shellface)((unsigned long) s.sh[6] & ~(unsigned long) 4l);
-}
-
-// Test a subface for viral infection.
-
-inline bool tetgenmesh::sinfected(face& s) {
- return (((unsigned long) s.sh[6] & (unsigned long) 4l) != 0);
-}
-
-//
-// End of primitives for subfaces/subsegments
-//
-
-//
-// Begin of primitives for interacting between tetrahedra and subfaces
-//
-
-// tspivot() finds a subface abutting on this tetrahdera.
-
-inline void tetgenmesh::tspivot(triface& t, face& s) {
- shellface sptr = (shellface) t.tet[8 + t.loc];
- sdecode(sptr, s);
-}
-
-// stpivot() finds a tetrahedron abutting a subface.
-
-inline void tetgenmesh::stpivot(face& s, triface& t) {
- tetrahedron ptr = (tetrahedron) s.sh[6 + EdgeRing(s.shver)];
- decode(ptr, t);
-}
-
-// tsbond() bond a tetrahedron to a subface.
-
-inline void tetgenmesh::tsbond(triface& t, face& s) {
- t.tet[8 + t.loc] = (tetrahedron) sencode(s);
- s.sh[6 + EdgeRing(s.shver)] = (shellface) encode(t);
-}
-
-// tsdissolve() dissolve a bond (from the tetrahedron side).
-
-inline void tetgenmesh::tsdissolve(triface& t) {
- t.tet[8 + t.loc] = (tetrahedron) dummysh;
-}
-
-// stdissolve() dissolve a bond (from the subface side).
-
-inline void tetgenmesh::stdissolve(face& s) {
- s.sh[6 + EdgeRing(s.shver)] = (shellface) dummytet;
-}
-
-//
-// End of primitives for interacting between tetrahedra and subfaces
-//
-
-//
-// Begin of primitives for interacting between subfaces and subsegs
-//
-
-// sspivot() finds a subsegment abutting a subface.
-
-inline void tetgenmesh::sspivot(face& s, face& edge) {
- shellface sptr = (shellface) s.sh[8 + Orient(s.shver)];
- sdecode(sptr, edge);
-}
-
-// ssbond() bond a subface to a subsegment.
-
-inline void tetgenmesh::ssbond(face& s, face& edge) {
- s.sh[8 + Orient(s.shver)] = sencode(edge);
- edge.sh[0] = sencode(s);
-}
-
-// ssdisolve() dissolve a bond (from the subface side)
-
-inline void tetgenmesh::ssdissolve(face& s) {
- s.sh[8 + Orient(s.shver)] = (shellface) dummysh;
-}
-
-//
-// End of primitives for interacting between subfaces and subsegs
-//
-
-//
-// Begin of primitives for points
-//
-
-inline int tetgenmesh::pointmark(point pt) {
- return ((int *) (pt))[pointmarkindex];
-}
-
-inline void tetgenmesh::setpointmark(point pt, int value) {
- ((int *) (pt))[pointmarkindex] = value;
-}
-
-// These two primitives set and read the type of the point.
-
-inline enum tetgenmesh::verttype tetgenmesh::pointtype(point pt) {
- return (enum verttype) ((int *) (pt))[pointmarkindex + 1];
-}
-
-inline void tetgenmesh::setpointtype(point pt, enum verttype value) {
- ((int *) (pt))[pointmarkindex + 1] = (int) value;
-}
-
-// These two primitives set and read a pointer to a tetrahedron.
-
-inline tetgenmesh::tetrahedron tetgenmesh::point2tet(point pt) {
- return ((tetrahedron *) (pt))[point2simindex];
-}
-
-inline void tetgenmesh::setpoint2tet(point pt, tetrahedron value) {
- ((tetrahedron *) (pt))[point2simindex] = value;
-}
-
-// These two primitives set and read a pointer to a subface/subsegment.
-// Note: they use the same field as the above. Don't use them together.
-
-inline tetgenmesh::shellface tetgenmesh::point2sh(point pt) {
- return (shellface) ((tetrahedron *) (pt))[point2simindex];
-}
-
-inline void tetgenmesh::setpoint2sh(point pt, shellface value) {
- ((tetrahedron *) (pt))[point2simindex] = (tetrahedron) value;
-}
-
-// These two primitives set and read a pointer to a point.
-// Note: they use the same field as the above. Don't use them together.
-
-inline tetgenmesh::point tetgenmesh::point2pt(point pt) {
- return (point) ((tetrahedron *) (pt))[point2simindex];
-}
-
-inline void tetgenmesh::setpoint2pt(point pt, point value) {
- ((tetrahedron *) (pt))[point2simindex] = (tetrahedron) value;
-}
-
-// These primitives set and read a pointer to its parent point. They're used
-// only in qulaity conforming Delaunay mesh algorithm.
-
-inline tetgenmesh::point tetgenmesh::point2ppt(point pt) {
- return (point) ((tetrahedron *) (pt))[point2simindex + 1];
-}
-
-inline void tetgenmesh::setpoint2ppt(point pt, point value) {
- ((tetrahedron *) (pt))[point2simindex + 1] = (tetrahedron) value;
-}
-
-// Get the pre-calculated lifting point of a facet (specified by its mark).
-
-inline tetgenmesh::point tetgenmesh::getliftpoint(int facetmark) {
- return (point) &liftpointarray[(facetmark - 1) * 3];
-}
-
-//
-// End of primitives for points
-//
-
-//
-// Begin of advanced primitives
-//
-
-// adjustedgering() adjusts the edge version so that it belongs to the
-// indicated edge ring. The 'direction' only can be 0(CCW) or 1(CW).
-// If the edge is not in the wanted edge ring, reverse it.
-
-inline void tetgenmesh::adjustedgering(triface& t, int direction) {
- if (EdgeRing(t.ver) != direction) {
- esymself(t);
- }
-}
-
-inline void tetgenmesh::adjustedgering(face& s, int direction) {
- if (EdgeRing(s.shver) != direction) {
- sesymself(s);
- }
-}
-
-// isdead() returns TRUE if the tetrahedron or subface has been dealloced.
-
-inline bool tetgenmesh::isdead(triface* t) {
- if (t->tet == (tetrahedron *) NULL) return true;
- else return t->tet[4] == (tetrahedron) NULL;
-}
-
-inline bool tetgenmesh::isdead(face* s) {
- if (s->sh == (shellface *) NULL) return true;
- else return s->sh[3] == (shellface) NULL;
-}
-
-// isfacehaspoint() returns TRUE if the 'testpoint' is one of the vertices
-// of the subface 's'.
-
-inline bool tetgenmesh::isfacehaspoint(face* s, point testpoint) {
- return (s->sh[3] == (shellface) testpoint) ||
- (s->sh[4] == (shellface) testpoint) ||
- (s->sh[5] == (shellface) testpoint);
-}
-
-// isfacehasedge() returns TRUE if the edge (given by its two endpoints) is
-// one of the three edges of the subface 's'.
-
-inline bool tetgenmesh::isfacehasedge(face* s, point tend1, point tend2) {
- return (isfacehaspoint(s, tend1) && isfacehaspoint(s, tend2));
-}
-
-// issymexist() returns TRUE if the adjoining tetrahedron is not 'duumytet'.
-
-inline bool tetgenmesh::issymexist(triface* t) {
- tetrahedron *ptr = (tetrahedron *)
- ((unsigned long)(t->tet[t->loc]) & ~(unsigned long)7l);
- return ptr != dummytet;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getnextface() Get the successor of 'tface1' in the face ring. //
-// //
-// If 'tface1' is not a boundary (or hull) face, then its successor in the //
-// face ring exists. The successor is returned in 'tface2' if it is not a //
-// NULL, or the 'tface1' itself is used to return this face. On finish, the //
-// function returns TRUE. //
-// //
-// If 'tface1' is a boundary (or hull) face, its successor does not exist. //
-// This case, return FALSE and 'tface1' remains unchanged. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::getnextface(triface* tface1, triface* tface2)
-{
- point torg, tdest;
- int tloc, tver;
-
- // Where the next face locates, in 'tface1' or in its neigbhour? It can be
- // quickly determined by checking the edge ring of 'tface1'.
- if (EdgeRing(tface1->ver) == CW) {
- // The next face is in the neigbhour of 'tface1'.
- if (!issymexist(tface1)) {
- // Hit outer space - The next face does not exist.
- return false;
- }
- torg = org(*tface1);
- tdest = dest(*tface1);
- if (tface2) {
- sym(*tface1, *tface2);
- findedge(tface2, torg, tdest);
- } else {
- symself(*tface1);
- findedge(tface1, torg, tdest);
- }
- } else {
- // The next face is in 'tface1'.
- if (tface2) {
- *tface2 = *tface1;
- }
- }
-
- if (tface2) {
- tloc = tface2->loc;
- tver = tface2->ver;
- tface2->loc = locver2nextf[tloc][tver][0];
- tface2->ver = locver2nextf[tloc][tver][1];
- } else {
- tloc = tface1->loc;
- tver = tface1->ver;
- tface1->loc = locver2nextf[tloc][tver][0];
- tface1->ver = locver2nextf[tloc][tver][1];
- }
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getnextsface() Finds the next subface in the face ring. //
-// //
-// For saving space in the data structure of subface, there only exists one //
-// face ring around a segment (see programming manual). This routine imple- //
-// ments the double face ring as desired in Muecke's data structure. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::getnextsface(face* s1, face* s2)
-{
- face neighsh, spinsh;
- face testseg;
-
- sspivot(*s1, testseg);
- if (testseg.sh != dummysh) {
- testseg.shver = 0;
- if (sorg(testseg) == sorg(*s1)) {
- spivot(*s1, neighsh);
- } else {
- spinsh = *s1;
- do {
- neighsh = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != s1->sh);
- }
- } else {
- spivot(*s1, neighsh);
- }
- if (sorg(neighsh) != sorg(*s1)) {
- sesymself(neighsh);
- }
- if (s2 != (face *) NULL) {
- *s2 = neighsh;
- } else {
- *s1 = neighsh;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tsspivot() Finds a subsegment abutting on a tetrahderon's edge. //
-// //
-// The edge is represented in the primary edge of 'checkedge'. If there is a //
-// subsegment bonded at this edge, it is returned in handle 'checkseg', the //
-// edge direction of 'checkseg' is conformed to 'checkedge'. If there isn't, //
-// set 'checkseg.sh = dummysh' to indicate it is not a subsegment. //
-// //
-// To find whether an edge of a tetrahedron is a subsegment or not. First we //
-// need find a subface around this edge to see if it contains a subsegment. //
-// The reason is there is no direct connection between a tetrahedron and its //
-// adjoining subsegments. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::tsspivot(triface* checkedge, face* checkseg)
-{
- triface spintet;
- face parentsh;
- point tapex;
- int hitbdry;
-
- spintet = *checkedge;
- tapex = apex(*checkedge);
- hitbdry = 0;
- do {
- tspivot(spintet, parentsh);
- if (parentsh.sh != dummysh) {
- // Find a subface!
- findedge(&parentsh, org(*checkedge), dest(*checkedge));
- sspivot(parentsh, *checkseg);
- if (checkseg->sh != dummysh) {
- // Find a subsegment! Correct its edge direction before return.
- if (sorg(*checkseg) != sorg(parentsh)) {
- sesymself(*checkseg);
- }
- }
- return;
- }
- if (!fnextself(spintet)) {
- hitbdry++;
- if (hitbdry < 2) {
- esym(*checkedge, spintet);
- if (!fnextself(spintet)) {
- hitbdry++;
- }
- }
- }
- } while ((apex(spintet) != tapex) && (hitbdry < 2));
- // Not find.
- checkseg->sh = dummysh;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// sstpivot() Finds a tetrahedron abutting a subsegment. //
-// //
-// This is the inverse operation of 'tsspivot()'. One subsegment shared by //
-// arbitrary number of tetrahedron, the returned tetrahedron is not unique. //
-// The edge direction of the returned tetrahedron is conformed to the given //
-// subsegment. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::sstpivot(face* checkseg, triface* retedge)
-{
- face parentsh;
-
- // Get the subface which holds the subsegment.
- sdecode(checkseg->sh[0], parentsh);
- assert(parentsh.sh != dummysh);
- // Get a tetraheron to which the subface attches.
- stpivot(parentsh, *retedge);
- if (retedge->tet == dummytet) {
- sesymself(parentsh);
- stpivot(parentsh, *retedge);
- assert(retedge->tet != dummytet);
- }
- // Correct the edge direction before return.
- findedge(retedge, sorg(*checkseg), sdest(*checkseg));
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// findorg() Finds a point in the given handle (tetrahedron or subface). //
-// //
-// If 'dorg' is a one of vertices of the given handle, set the origin of //
-// this handle be that point and return TRUE. Otherwise, return FALSE and //
-// 'tface' remains unchanged. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::findorg(triface* tface, point dorg)
-{
- if (org(*tface) == dorg) {
- return true;
- } else {
- if (dest(*tface) == dorg) {
- enextself(*tface);
- return true;
- } else {
- if (apex(*tface) == dorg) {
- enext2self(*tface);
- return true;
- } else {
- if (oppo(*tface) == dorg) {
- // Keep 'tface' referring to the same tet after fnext().
- adjustedgering(*tface, CCW);
- fnextself(*tface);
- enext2self(*tface);
- return true;
- }
- }
- }
- }
- return false;
-}
-
-bool tetgenmesh::findorg(face* sface, point dorg)
-{
- if (sorg(*sface) == dorg) {
- return true;
- } else {
- if (sdest(*sface) == dorg) {
- senextself(*sface);
- return true;
- } else {
- if (sapex(*sface) == dorg) {
- senext2self(*sface);
- return true;
- }
- }
- }
- return false;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// findedge() Find an edge in the given handle (tetrahedron or subface). //
-// //
-// The edge is given in two points 'eorg' and 'edest'. It is assumed that //
-// the edge must exist in the given handle (tetrahedron or subface). This //
-// routine sets the right edge version for the input handle. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::findedge(triface* tface, point eorg, point edest)
-{
- int i;
-
- for (i = 0; i < 3; i++) {
- if (org(*tface) == eorg) {
- if (dest(*tface) == edest) {
- // Edge is found, return.
- return;
- }
- } else {
- if (org(*tface) == edest) {
- if (dest(*tface) == eorg) {
- // Edge is found, but need to inverse the direction.
- esymself(*tface);
- return;
- }
- }
- }
- enextself(*tface);
- }
- // It should not be here.
- assert(i < 3);
-}
-
-void tetgenmesh::findedge(face* sface, point eorg, point edest)
-{
- int i;
-
- for (i = 0; i < 3; i++) {
- if (sorg(*sface) == eorg) {
- if (sdest(*sface) == edest) {
- // Edge is found, return.
- return;
- }
- } else {
- if (sorg(*sface) == edest) {
- if (sdest(*sface) == eorg) {
- // Edge is found, but need to inverse the direction.
- sesymself(*sface);
- return;
- }
- }
- }
- senextself(*sface);
- }
- // It should not be here.
- assert(i < 3);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// findface() Find the face has the given origin, destination and apex. //
-// //
-// On input, 'fface' is a handle which may contain the three corners or may //
-// not or may be dead. On return, it represents exactly the face with the //
-// given origin, destination and apex. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::findface(triface *fface, point forg, point fdest, point fapex)
-{
- triface spintet;
- enum finddirectionresult collinear;
- int hitbdry;
-
- if (!isdead(fface)) {
- // First check the easiest case, that 'fface' is just the right one.
- if (org(*fface) == forg && dest(*fface) == fdest &&
- apex(*fface) == fapex) return;
- } else {
- // The input handle is dead, use the 'recenttet' if it is alive.
- if (!isdead(&recenttet)) *fface = recenttet;
- }
-
- if (!isdead(fface)) {
- if (!findorg(fface, forg)) {
- // 'forg' is not a corner of 'fface', locate it.
- preciselocate(forg, fface);
- }
- // It is possible that forg is not found in a non-convex mesh.
- if (org(*fface) == forg) {
- collinear = finddirection(fface, fdest);
- if (collinear == RIGHTCOLLINEAR) {
- // fdest is just the destination.
- } else if (collinear == LEFTCOLLINEAR) {
- enext2self(*fface);
- esymself(*fface);
- } else if (collinear == TOPCOLLINEAR) {
- fnextself(*fface);
- enext2self(*fface);
- esymself(*fface);
- }
- }
- // It is possible taht fdest is not found in a non-convex mesh.
- if ((org(*fface) == forg) && (dest(*fface) == fdest)) {
- // Find the apex of 'fapex'.
- spintet = *fface;
- hitbdry = 0;
- do {
- if (apex(spintet) == fapex) {
- // We have done. Be careful the edge direction of 'spintet',
- // it may reversed because of hitting boundary once.
- if (org(spintet) != org(*fface)) {
- esymself(spintet);
- }
- *fface = spintet;
- return;
- }
- if (!fnextself(spintet)) {
- hitbdry ++;
- if (hitbdry < 2) {
- esym(*fface, spintet);
- if (!fnextself(spintet)) {
- hitbdry ++;
- }
- }
- }
- } while (hitbdry < 2 && apex(spintet) != apex(*fface));
- // It is possible that fapex is not found in a non-convex mesh.
- }
- }
-
- if (isdead(fface) || (org(*fface) != forg) || (dest(*fface) != fdest) ||
- (apex(*fface) != fapex)) {
- // Too bad, the input handle is useless. We have to find a handle
- // for 'fface' contains the 'forg' and 'fdest'. Here a brute force
- // search is performed.
- if (b->verbose > 1) {
- printf("Warning in findface(): Perform a brute-force searching.\n");
- }
- enum verttype forgty, fdestty, fapexty;
- int share, i;
- forgty = pointtype(forg);
- fdestty = pointtype(fdest);
- fapexty = pointtype(fapex);
- setpointtype(forg, DEADVERTEX);
- setpointtype(fdest, DEADVERTEX);
- setpointtype(fapex, DEADVERTEX);
- tetrahedrons->traversalinit();
- fface->tet = tetrahedrontraverse();
- while (fface->tet != (tetrahedron *) NULL) {
- share = 0;
- for (i = 0; i < 4; i++) {
- if (pointtype((point) fface->tet[4 + i]) == DEADVERTEX) share ++;
- }
- if (share == 3) {
- // Found! Set the correct face and desired corners.
- if (pointtype((point) fface->tet[4]) != DEADVERTEX) {
- fface->loc = 2;
- } else if (pointtype((point) fface->tet[5]) != DEADVERTEX) {
- fface->loc = 3;
- } else if (pointtype((point) fface->tet[6]) != DEADVERTEX) {
- fface->loc = 1;
- } else { // pointtype((point) fface->tet[7]) != DEADVERTEX
- fface->loc = 0;
- }
- findedge(fface, forg, fdest);
- break;
- }
- fface->tet = tetrahedrontraverse();
- }
- setpointtype(forg, forgty);
- setpointtype(fdest, fdestty);
- setpointtype(fapex, fapexty);
- if (fface->tet == (tetrahedron *) NULL) {
- // It is impossible to reach here.
- printf("Internal error: Fail to find the indicated face.\n");
- internalerror();
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getonextseg() Get the next SEGMENT counterclockwise with the same org. //
-// //
-// 's' is a subface. This routine reteuns the segment which is counterclock- //
-// wise with the origin of s. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::getonextseg(face* s, face* lseg)
-{
- face checksh, checkseg;
- point forg;
-
- forg = sorg(*s);
- checksh = *s;
- do {
- // Go to the edge at forg's left side.
- senext2self(checksh);
- // Check if there is a segment attaching this edge.
- sspivot(checksh, checkseg);
- if (checkseg.sh != dummysh) break;
- // No segment! Go to the neighbor of this subface.
- spivotself(checksh);
- // It should always meet a segment before come back.
- assert(checksh.sh != s->sh);
- if (sorg(checksh) != forg) {
- sesymself(checksh);
- assert(sorg(checksh) == forg);
- }
- } while (true);
- assert(checkseg.sh != dummysh);
- if (sorg(checkseg) != forg) sesymself(checkseg);
- *lseg = checkseg;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getseghasorg() Get the segment containing the given point. //
-// //
-// On input we know 'dorg' is an endpoint of the segment containing 'sseg'. //
-// This routine search along 'sseg' for the vertex 'dorg'. On return, 'sseg' //
-// contains 'dorg' as its origin. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::getseghasorg(face* sseg, point dorg)
-{
- face nextseg;
- point checkpt;
-
- nextseg = *sseg;
- checkpt = sorg(nextseg);
- while ((checkpt != dorg) && (pointtype(checkpt) == FREESEGVERTEX)) {
- // Search dorg along the original direction of sseg.
- senext2self(nextseg);
- spivotself(nextseg);
- nextseg.shver = 0;
- if (sdest(nextseg) != checkpt) sesymself(nextseg);
- checkpt = sorg(nextseg);
- }
- if (checkpt == dorg) {
- *sseg = nextseg;
- return;
- }
- nextseg = *sseg;
- checkpt = sdest(nextseg);
- while ((checkpt != dorg) && (pointtype(checkpt) == FREESEGVERTEX)) {
- // Search dorg along the destinational direction of sseg.
- senextself(nextseg);
- spivotself(nextseg);
- nextseg.shver = 0;
- if (sorg(nextseg) != checkpt) sesymself(nextseg);
- checkpt = sdest(nextseg);
- }
- if (checkpt == dorg) {
- sesym(nextseg, *sseg);
- return;
- }
- // Should not be here.
- assert(0);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getsubsegfarorg() Get the origin of the parent segment of a subseg. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::point tetgenmesh::getsubsegfarorg(face* sseg)
-{
- face prevseg;
- point checkpt;
-
- checkpt = sorg(*sseg);
- senext2(*sseg, prevseg);
- spivotself(prevseg);
- // Search dorg along the original direction of sseg.
- while (prevseg.sh != dummysh) {
- prevseg.shver = 0;
- if (sdest(prevseg) != checkpt) sesymself(prevseg);
- checkpt = sorg(prevseg);
- senext2self(prevseg);
- spivotself(prevseg);
- }
- return checkpt;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getsubsegfardest() Get the dest. of the parent segment of a subseg. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::point tetgenmesh::getsubsegfardest(face* sseg)
-{
- face nextseg;
- point checkpt;
-
- checkpt = sdest(*sseg);
- senext(*sseg, nextseg);
- spivotself(nextseg);
- // Search dorg along the destinational direction of sseg.
- while (nextseg.sh != dummysh) {
- nextseg.shver = 0;
- if (sorg(nextseg) != checkpt) sesymself(nextseg);
- checkpt = sdest(nextseg);
- senextself(nextseg);
- spivotself(nextseg);
- }
- return checkpt;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// printtet() Print out the details of a tetrahedron on screen. //
-// //
-// It's also used when the highest level of verbosity (`-VVV') is specified. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::printtet(triface* tface)
-{
- triface tmpface, prtface;
- point tmppt;
- face tmpsh;
- int facecount;
-
- printf("Tetra x%lx with loc(%i) and ver(%i):",
- (unsigned long)(tface->tet), tface->loc, tface->ver);
- if (infected(*tface)) {
- printf(" (infected)");
- }
- printf("\n");
-
- tmpface = *tface;
- facecount = 0;
- while(facecount < 4) {
- tmpface.loc = facecount;
- sym(tmpface, prtface);
- if(prtface.tet == dummytet) {
- printf(" [%i] Outer space.\n", facecount);
- } else {
- printf(" [%i] x%lx loc(%i).", facecount,
- (unsigned long)(prtface.tet), prtface.loc);
- if (infected(prtface)) {
- printf(" (infected)");
- }
- printf("\n");
- }
- facecount ++;
- }
-
- tmppt = org(*tface);
- if(tmppt == (point) NULL) {
- printf(" Org [%i] NULL\n", locver2org[tface->loc][tface->ver]);
- } else {
- printf(" Org [%i] x%lx (%.12g,%.12g,%.12g) %d\n",
- locver2org[tface->loc][tface->ver], (unsigned long)(tmppt),
- tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
- }
- tmppt = dest(*tface);
- if(tmppt == (point) NULL) {
- printf(" Dest[%i] NULL\n", locver2dest[tface->loc][tface->ver]);
- } else {
- printf(" Dest[%i] x%lx (%.12g,%.12g,%.12g) %d\n",
- locver2dest[tface->loc][tface->ver], (unsigned long)(tmppt),
- tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
- }
- tmppt = apex(*tface);
- if(tmppt == (point) NULL) {
- printf(" Apex[%i] NULL\n", locver2apex[tface->loc][tface->ver]);
- } else {
- printf(" Apex[%i] x%lx (%.12g,%.12g,%.12g) %d\n",
- locver2apex[tface->loc][tface->ver], (unsigned long)(tmppt),
- tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
- }
- tmppt = oppo(*tface);
- if(tmppt == (point) NULL) {
- printf(" Oppo[%i] NULL\n", loc2oppo[tface->loc]);
- } else {
- printf(" Oppo[%i] x%lx (%.12g,%.12g,%.12g) %d\n",
- loc2oppo[tface->loc], (unsigned long)(tmppt),
- tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
- }
-
- if (b->useshelles) {
- tmpface = *tface;
- facecount = 0;
- while(facecount < 4) {
- tmpface.loc = facecount;
- tspivot(tmpface, tmpsh);
- if(tmpsh.sh != dummysh) {
- printf(" [%i] x%lx ID(%i).\n", facecount,
- (unsigned long)(tmpsh.sh), shellmark(tmpsh));
- }
- facecount ++;
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// printsh() Print out the details of a subface or subsegment on screen. //
-// //
-// It's also used when the highest level of verbosity (`-VVV') is specified. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::printsh(face* sface)
-{
- face prtsh;
- triface prttet;
- point printpoint;
-
- if (sapex(*sface) != NULL) {
- printf("subface x%lx, ver %d, mark %d:",
- (unsigned long)(sface->sh), sface->shver, shellmark(*sface));
- } else {
- printf("Subsegment x%lx, ver %d, mark %d:",
- (unsigned long)(sface->sh), sface->shver, shellmark(*sface));
- }
- if (sinfected(*sface)) {
- printf(" (infected)");
- }
- if (shell2badface(*sface)) {
- printf(" (queued)");
- }
- if (sapex(*sface) != NULL) {
- if (shelltype(*sface) == PROTCYLSUBFACE) {
- printf(" (cyls)");
- } else if (shelltype(*sface) == PROTSPHSUBFACE) {
- printf(" (sphs)");
- }
- } else {
- if (shelltype(*sface) == SHARPSEGMENT) {
- printf(" (sharp)");
- } else if (shelltype(*sface) == PROTCYLSEGMENT) {
- printf(" (cyls)");
- } else if (shelltype(*sface) == PROTSPHSEGMENT) {
- printf(" (sphs)");
- }
- }
- printf("\n");
-
- sdecode(sface->sh[0], prtsh);
- if (prtsh.sh == dummysh) {
- printf(" [0] = No shell\n");
- } else {
- printf(" [0] = x%lx %d\n", (unsigned long)(prtsh.sh), prtsh.shver);
- }
- sdecode(sface->sh[1], prtsh);
- if (prtsh.sh == dummysh) {
- printf(" [1] = No shell\n");
- } else {
- printf(" [1] = x%lx %d\n", (unsigned long)(prtsh.sh), prtsh.shver);
- }
- sdecode(sface->sh[2], prtsh);
- if (prtsh.sh == dummysh) {
- printf(" [2] = No shell\n");
- } else {
- printf(" [2] = x%lx %d\n", (unsigned long)(prtsh.sh), prtsh.shver);
- }
-
- printpoint = sorg(*sface);
- if (printpoint == (point) NULL)
- printf(" Org [%d] = NULL\n", vo[sface->shver]);
- else
- printf(" Org [%d] = x%lx (%.12g,%.12g,%.12g) %d\n",
- vo[sface->shver], (unsigned long)(printpoint), printpoint[0],
- printpoint[1], printpoint[2], pointmark(printpoint));
- printpoint = sdest(*sface);
- if (printpoint == (point) NULL)
- printf(" Dest[%d] = NULL\n", vd[sface->shver]);
- else
- printf(" Dest[%d] = x%lx (%.12g,%.12g,%.12g) %d\n",
- vd[sface->shver], (unsigned long)(printpoint), printpoint[0],
- printpoint[1], printpoint[2], pointmark(printpoint));
-
- if (sapex(*sface) != NULL) {
- printpoint = sapex(*sface);
- if (printpoint == (point) NULL)
- printf(" Apex[%d] = NULL\n", va[sface->shver]);
- else
- printf(" Apex[%d] = x%lx (%.12g,%.12g,%.12g) %d\n",
- va[sface->shver], (unsigned long)(printpoint), printpoint[0],
- printpoint[1], printpoint[2], pointmark(printpoint));
-
- decode(sface->sh[6], prttet);
- if (prttet.tet == dummytet) {
- printf(" [6] = Outer space\n");
- } else {
- printf(" [6] = x%lx %d\n",
- (unsigned long)(prttet.tet), prttet.loc);
- }
- decode(sface->sh[7], prttet);
- if (prttet.tet == dummytet) {
- printf(" [7] = Outer space\n");
- } else {
- printf(" [7] = x%lx %d\n",
- (unsigned long)(prttet.tet), prttet.loc);
- }
-
- sdecode(sface->sh[8], prtsh);
- if (prtsh.sh == dummysh) {
- printf(" [8] = No subsegment\n");
- } else {
- printf(" [8] = x%lx %d\n",
- (unsigned long)(prtsh.sh), prtsh.shver);
- }
- sdecode(sface->sh[9], prtsh);
- if (prtsh.sh == dummysh) {
- printf(" [9] = No subsegment\n");
- } else {
- printf(" [9] = x%lx %d\n",
- (unsigned long)(prtsh.sh), prtsh.shver);
- }
- sdecode(sface->sh[10], prtsh);
- if (prtsh.sh == dummysh) {
- printf(" [10]= No subsegment\n");
- } else {
- printf(" [10]= x%lx %d\n",
- (unsigned long)(prtsh.sh), prtsh.shver);
- }
- }
-}
-
-//
-// End of advanced primitives
-//
-
-//
-// End of mesh manipulation primitives
-//
-
-//
-// Begin of mesh items searching routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// makepoint2tetmap() Construct a mapping from points to tetrahedra. //
-// //
-// Traverses all the tetrahedra, provides each corner of each tetrahedron //
-// with a pointer to that tetrahedera. Some pointers will be overwritten by //
-// other pointers because each point may be a corner of several tetrahedra, //
-// but in the end every point will point to a tetrahedron that contains it. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::makepoint2tetmap()
-{
- triface tetloop;
- point pointptr;
-
- if (b->verbose) {
- printf(" Constructing mapping from points to tetrahedra.\n");
- }
-
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- // Check all four points of the tetrahedron.
- pointptr = org(tetloop);
- setpoint2tet(pointptr, encode(tetloop));
- pointptr = dest(tetloop);
- setpoint2tet(pointptr, encode(tetloop));
- pointptr = apex(tetloop);
- setpoint2tet(pointptr, encode(tetloop));
- pointptr = oppo(tetloop);
- setpoint2tet(pointptr, encode(tetloop));
- // Get the next tetrahedron in the list.
- tetloop.tet = tetrahedrontraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// makeindex2pointmap() Create a map from index to vertices. //
-// //
-// 'idx2verlist' returns the created map. Traverse all vertices, a pointer //
-// to each vertex is set into the array. The pointer to the first vertex is //
-// saved in 'idx2verlist[0]'. Don't forget to minus 'in->firstnumber' when //
-// to get the vertex form its index. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::makeindex2pointmap(point*& idx2verlist)
-{
- point pointloop;
- int idx;
-
- if (b->verbose) {
- printf(" Constructing mapping from indices to points.\n");
- }
-
- idx2verlist = new point[points->items];
-
- points->traversalinit();
- pointloop = pointtraverse();
- idx = 0;
- while (pointloop != (point) NULL) {
- idx2verlist[idx] = pointloop;
- idx++;
- pointloop = pointtraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// makesegmentmap() Create a map from vertices (their indices) to //
-// segments incident at the same vertices. //
-// //
-// Two arrays 'idx2seglist' and 'segsperverlist' together return the map. //
-// They form a sparse matrix structure with size (n + 1) x (n + 1), n is the //
-// number of segments. idx2seglist contains row information and //
-// segsperverlist contains all (non-zero) elements. The i-th entry of //
-// idx2seglist is the starting position of i-th row's (non-zero) elements in //
-// segsperverlist. The number of elements of i-th row is calculated by the //
-// (i+1)-th entry minus i-th entry of idx2seglist. //
-// //
-// NOTE: These two arrays will be created inside this routine, don't forget //
-// to free them after using. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-makesegmentmap(int*& idx2seglist, shellface**& segsperverlist)
-{
- shellface *shloop;
- int i, j, k;
-
- if (b->verbose) {
- printf(" Constructing mapping from points to segments.\n");
- }
-
- // Create and initialize 'idx2seglist'.
- idx2seglist = new int[points->items + 1];
- for (i = 0; i < points->items + 1; i++) {
- idx2seglist[i] = 0;
- }
-
- // Loop the set of segments once, counter the number of segments sharing
- // each vertex.
- subsegs->traversalinit();
- shloop = shellfacetraverse(subsegs);
- while (shloop != (shellface *) NULL) {
- // Increment the number of sharing segments for each endpoint.
- for (i = 0; i < 2; i++) {
- j = pointmark((point) shloop[3 + i]) - in->firstnumber;
- idx2seglist[j]++;
- }
- shloop = shellfacetraverse(subsegs);
- }
-
- // Calculate the total length of array 'facesperverlist'.
- j = idx2seglist[0];
- idx2seglist[0] = 0; // Array starts from 0 element.
- for (i = 0; i < points->items; i++) {
- k = idx2seglist[i + 1];
- idx2seglist[i + 1] = idx2seglist[i] + j;
- j = k;
- }
- // The total length is in the last unit of idx2seglist.
- segsperverlist = new shellface*[idx2seglist[i]];
- // Loop the set of segments again, set the info. of segments per vertex.
- subsegs->traversalinit();
- shloop = shellfacetraverse(subsegs);
- while (shloop != (shellface *) NULL) {
- for (i = 0; i < 2; i++) {
- j = pointmark((point) shloop[3 + i]) - in->firstnumber;
- segsperverlist[idx2seglist[j]] = shloop;
- idx2seglist[j]++;
- }
- shloop = shellfacetraverse(subsegs);
- }
- // Contents in 'idx2seglist' are shifted, now shift them back.
- for (i = points->items - 1; i >= 0; i--) {
- idx2seglist[i + 1] = idx2seglist[i];
- }
- idx2seglist[0] = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// makesubfacemap() Create a map from vertices (their indices) to //
-// subfaces incident at the same vertices. //
-// //
-// Two arrays 'idx2facelist' and 'facesperverlist' together return the map. //
-// They form a sparse matrix structure with size (n + 1) x (n + 1), n is the //
-// number of subfaces. idx2facelist contains row information and //
-// facesperverlist contains all (non-zero) elements. The i-th entry of //
-// idx2facelist is the starting position of i-th row's(non-zero) elements in //
-// facesperverlist. The number of elements of i-th row is calculated by the //
-// (i+1)-th entry minus i-th entry of idx2facelist. //
-// //
-// NOTE: These two arrays will be created inside this routine, don't forget //
-// to free them after using. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-makesubfacemap(int*& idx2facelist, shellface**& facesperverlist)
-{
- shellface *shloop;
- int i, j, k;
-
- if (b->verbose) {
- printf(" Constructing mapping from points to subfaces.\n");
- }
-
- // Create and initialize 'idx2facelist'.
- idx2facelist = new int[points->items + 1];
- for (i = 0; i < points->items + 1; i++) {
- idx2facelist[i] = 0;
- }
-
- // Loop the set of subfaces once, counter the number of subfaces sharing
- // each vertex.
- subfaces->traversalinit();
- shloop = shellfacetraverse(subfaces);
- while (shloop != (shellface *) NULL) {
- // Increment the number of sharing segments for each endpoint.
- for (i = 0; i < 3; i++) {
- j = pointmark((point) shloop[3 + i]) - in->firstnumber;
- idx2facelist[j]++;
- }
- shloop = shellfacetraverse(subfaces);
- }
-
- // Calculate the total length of array 'facesperverlist'.
- j = idx2facelist[0];
- idx2facelist[0] = 0; // Array starts from 0 element.
- for (i = 0; i < points->items; i++) {
- k = idx2facelist[i + 1];
- idx2facelist[i + 1] = idx2facelist[i] + j;
- j = k;
- }
- // The total length is in the last unit of idx2facelist.
- facesperverlist = new shellface*[idx2facelist[i]];
- // Loop the set of segments again, set the info. of segments per vertex.
- subfaces->traversalinit();
- shloop = shellfacetraverse(subfaces);
- while (shloop != (shellface *) NULL) {
- for (i = 0; i < 3; i++) {
- j = pointmark((point) shloop[3 + i]) - in->firstnumber;
- facesperverlist[idx2facelist[j]] = shloop;
- idx2facelist[j]++;
- }
- shloop = shellfacetraverse(subfaces);
- }
- // Contents in 'idx2facelist' are shifted, now shift them back.
- for (i = points->items - 1; i >= 0; i--) {
- idx2facelist[i + 1] = idx2facelist[i];
- }
- idx2facelist[0] = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// maketetrahedronmap() Create a map from vertices (their indices) to //
-// tetrahedra incident at the same vertices. //
-// //
-// Two arrays 'idx2tetlist' and 'tetsperverlist' together return the map. //
-// They form a sparse matrix structure with size (n + 1) x (n + 1), n is the //
-// number of tetrahedra. idx2tetlist contains row information and //
-// tetsperverlist contains all (non-zero) elements. The i-th entry of //
-// idx2tetlist is the starting position of i-th row's (non-zero) elements in //
-// tetsperverlist. The number of elements of i-th row is calculated by the //
-// (i+1)-th entry minus i-th entry of idx2tetlist. //
-// //
-// NOTE: These two arrays will be created inside this routine, don't forget //
-// to free them after using. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-maketetrahedronmap(int*& idx2tetlist, tetrahedron**& tetsperverlist)
-{
- tetrahedron *tetloop;
- int i, j, k;
-
- if (b->verbose) {
- printf(" Constructing mapping from points to tetrahedra.\n");
- }
-
- // Create and initialize 'idx2tetlist'.
- idx2tetlist = new int[points->items + 1];
- for (i = 0; i < points->items + 1; i++) {
- idx2tetlist[i] = 0;
- }
-
- // Loop the set of tetrahedra once, counter the number of tetrahedra
- // sharing each vertex.
- tetrahedrons->traversalinit();
- tetloop = tetrahedrontraverse();
- while (tetloop != (tetrahedron *) NULL) {
- // Increment the number of sharing tetrahedra for each endpoint.
- for (i = 0; i < 4; i++) {
- j = pointmark((point) tetloop[4 + i]) - in->firstnumber;
- idx2tetlist[j]++;
- }
- tetloop = tetrahedrontraverse();
- }
-
- // Calculate the total length of array 'tetsperverlist'.
- j = idx2tetlist[0];
- idx2tetlist[0] = 0; // Array starts from 0 element.
- for (i = 0; i < points->items; i++) {
- k = idx2tetlist[i + 1];
- idx2tetlist[i + 1] = idx2tetlist[i] + j;
- j = k;
- }
- // The total length is in the last unit of idx2tetlist.
- tetsperverlist = new tetrahedron*[idx2tetlist[i]];
- // Loop the set of tetrahedra again, set the info. of tet. per vertex.
- tetrahedrons->traversalinit();
- tetloop = tetrahedrontraverse();
- while (tetloop != (tetrahedron *) NULL) {
- for (i = 0; i < 4; i++) {
- j = pointmark((point) tetloop[4 + i]) - in->firstnumber;
- tetsperverlist[idx2tetlist[j]] = tetloop;
- idx2tetlist[j]++;
- }
- tetloop = tetrahedrontraverse();
- }
- // Contents in 'idx2tetlist' are shifted, now shift them back.
- for (i = points->items - 1; i >= 0; i--) {
- idx2tetlist[i + 1] = idx2tetlist[i];
- }
- idx2tetlist[0] = 0;
-}
-
-//
-// End of mesh items searching routines
-//
-
-//
-// Begin of linear algebra functions
-//
-
-// dot() returns the dot product: v1 dot v2.
-
-inline REAL tetgenmesh::dot(REAL* v1, REAL* v2)
-{
- return v1[0] * v2[0] + v1[1] * v2[1] + v1[2] * v2[2];
-}
-
-// cross() computes the cross product: n = v1 cross v2.
-
-inline void tetgenmesh::cross(REAL* v1, REAL* v2, REAL* n)
-{
- n[0] = v1[1] * v2[2] - v2[1] * v1[2];
- n[1] = -(v1[0] * v2[2] - v2[0] * v1[2]);
- n[2] = v1[0] * v2[1] - v2[0] * v1[1];
-}
-
-// initm44() initializes a 4x4 matrix.
-void tetgenmesh::initm44(REAL a00, REAL a01, REAL a02, REAL a03,
- REAL a10, REAL a11, REAL a12, REAL a13,
- REAL a20, REAL a21, REAL a22, REAL a23,
- REAL a30, REAL a31, REAL a32, REAL a33,
- REAL M[4][4])
-{
- M[0][0] = a00; M[0][1] = a01; M[0][2] = a02; M[0][3] = a03;
- M[1][0] = a10; M[1][1] = a11; M[1][2] = a12; M[1][3] = a13;
- M[2][0] = a20; M[2][1] = a21; M[2][2] = a22; M[2][3] = a23;
- M[3][0] = a30; M[3][1] = a31; M[3][2] = a32; M[3][3] = a33;
-}
-
-// m4xm4() multiplies 2 4x4 matrics: m1 = m1 * m2.
-void tetgenmesh::m4xm4(REAL m1[4][4], REAL m2[4][4])
-{
- REAL tmp[4];
- int i, j;
-
- for (i = 0; i < 4; i++) { // i-th row
- for (j = 0; j < 4; j++) { // j-th col
- tmp[j] = m1[i][0] * m2[0][j] + m1[i][1] * m2[1][j]
- + m1[i][2] * m2[2][j] + m1[i][3] * m2[3][j];
- }
- for (j = 0; j < 4; j++)
- m1[i][j] = tmp[j];
- }
-}
-
-// m4xv4() multiplies a 4x4 matrix and 4x1 vector: v2 = m * v1
-void tetgenmesh::m4xv4(REAL v2[4], REAL m[4][4], REAL v1[4])
-{
- v2[0] = m[0][0]*v1[0] + m[0][1]*v1[1] + m[0][2]*v1[2] + m[0][3]*v1[3];
- v2[1] = m[1][0]*v1[0] + m[1][1]*v1[1] + m[1][2]*v1[2] + m[1][3]*v1[3];
- v2[2] = m[2][0]*v1[0] + m[2][1]*v1[1] + m[2][2]*v1[2] + m[2][3]*v1[3];
- v2[3] = m[3][0]*v1[0] + m[3][1]*v1[1] + m[3][2]*v1[2] + m[3][3]*v1[3];
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// lu_decmp() Compute the LU decomposition of a matrix. //
-// //
-// Compute the LU decomposition of a (non-singular) square matrix A using //
-// partial pivoting and implicit row exchanges. The result is: //
-// A = P * L * U, //
-// where P is a permutation matrix, L is unit lower triangular, and U is //
-// upper triangular. The factored form of A is used in combination with //
-// 'lu_solve()' to solve linear equations: Ax = b, or invert a matrix. //
-// //
-// The inputs are a square matrix 'lu[N..n+N-1][N..n+N-1]', it's size is 'n'.//
-// On output, 'lu' is replaced by the LU decomposition of a rowwise permuta- //
-// tion of itself, 'ps[N..n+N-1]' is an output vector that records the row //
-// permutation effected by the partial pivoting, effectively, 'ps' array //
-// tells the user what the permutation matrix P is; 'd' is output as +1/-1 //
-// depending on whether the number of row interchanges was even or odd, //
-// respectively. //
-// //
-// Return true if the LU decomposition is successfully computed, otherwise, //
-// return false in case that A is a singular matrix. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::lu_decmp(REAL lu[3][3], int n, int* ps, REAL* d, int N)
-{
- REAL scales[3];
- REAL pivot, biggest, mult, tempf;
- int pivotindex = 0;
- int i, j, k;
-
- *d = 1.0; // No row interchanges yet.
-
- for (i = N; i < n + N; i++) { // For each row.
- // Find the largest element in each row for row equilibration
- biggest = 0.0;
- for (j = N; j < n + N; j++)
- if (biggest < (tempf = fabs(lu[i][j])))
- biggest = tempf;
- if (biggest != 0.0)
- scales[i] = 1.0 / biggest;
- else {
- scales[i] = 0.0;
- return false; // Zero row: singular matrix.
- }
- ps[i] = i; // Initialize pivot sequence.
- }
-
- for (k = N; k < n + N - 1; k++) { // For each column.
- // Find the largest element in each column to pivot around.
- biggest = 0.0;
- for (i = k; i < n + N; i++) {
- if (biggest < (tempf = fabs(lu[ps[i]][k]) * scales[ps[i]])) {
- biggest = tempf;
- pivotindex = i;
- }
- }
- if (biggest == 0.0) {
- return false; // Zero column: singular matrix.
- }
- if (pivotindex != k) { // Update pivot sequence.
- j = ps[k];
- ps[k] = ps[pivotindex];
- ps[pivotindex] = j;
- *d = -(*d); // ...and change the parity of d.
- }
-
- // Pivot, eliminating an extra variable each time
- pivot = lu[ps[k]][k];
- for (i = k + 1; i < n + N; i++) {
- lu[ps[i]][k] = mult = lu[ps[i]][k] / pivot;
- if (mult != 0.0) {
- for (j = k + 1; j < n + N; j++)
- lu[ps[i]][j] -= mult * lu[ps[k]][j];
- }
- }
- }
-
- // (lu[ps[n + N - 1]][n + N - 1] == 0.0) ==> A is singular.
- return lu[ps[n + N - 1]][n + N - 1] != 0.0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// lu_solve() Solves the linear equation: Ax = b, after the matrix A //
-// has been decomposed into the lower and upper triangular //
-// matrices L and U, where A = LU. //
-// //
-// 'lu[N..n+N-1][N..n+N-1]' is input, not as the matrix 'A' but rather as //
-// its LU decomposition, computed by the routine 'lu_decmp'; 'ps[N..n+N-1]' //
-// is input as the permutation vector returned by 'lu_decmp'; 'b[N..n+N-1]' //
-// is input as the right-hand side vector, and returns with the solution //
-// vector. 'lu', 'n', and 'ps' are not modified by this routine and can be //
-// left in place for successive calls with different right-hand sides 'b'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::lu_solve(REAL lu[3][3], int n, int* ps, REAL* b, int N)
-{
- int i, j;
- REAL X[3], dot;
-
- for (i = N; i < n + N; i++) X[i] = 0.0;
-
- // Vector reduction using U triangular matrix.
- for (i = N; i < n + N; i++) {
- dot = 0.0;
- for (j = N; j < i + N; j++)
- dot += lu[ps[i]][j] * X[j];
- X[i] = b[ps[i]] - dot;
- }
-
- // Back substitution, in L triangular matrix.
- for (i = n + N - 1; i >= N; i--) {
- dot = 0.0;
- for (j = i + 1; j < n + N; j++)
- dot += lu[ps[i]][j] * X[j];
- X[i] = (X[i] - dot) / lu[ps[i]][i];
- }
-
- for (i = N; i < n + N; i++) b[i] = X[i];
-}
-
-//
-// End of linear algebra functions
-//
-
-//
-// Begin of geometric tests
-//
-
-// All the following routines require the input objects are not degenerate.
-// i.e., a triangle must has three non-collinear corners; an edge must
-// has two identical endpoints. Degenerate cases should have to detect
-// first and then handled as special cases.
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// edge_vertex_collinear_inter() Test whether an edge (ab) and a vertex //
-// (p) are intersecting or not. //
-// //
-// p and ab are collinear. Possible cases are p is coincident to a (p = a), //
-// or coincident to b (p = b), or inside ab (a < p < b), or outside ab (p < //
-// a or p > b). These cases can be quickly determined by comparing the //
-// homogeneous coordinates of a, b, and p (which are not all equal). //
-// //
-// The return value indicates one of the three cases: DISJOINT, SHAREVERTEX //
-// (p = a or p = b), and INTERSECT (a < p < b). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-edge_vertex_collinear_inter(REAL* A, REAL* B, REAL* P)
-{
- int i = 0;
- do {
- if (A[i] < B[i]) {
- if (P[i] < A[i]) {
- return DISJOINT;
- } else if (P[i] > A[i]) {
- if (P[i] < B[i]) {
- return INTERSECT;
- } else if (P[i] > B[i]) {
- return DISJOINT;
- } else {
- // assert(P[i] == B[i]);
- return SHAREVERTEX;
- }
- } else {
- // assert(P[i] == A[i]);
- return SHAREVERTEX;
- }
- } else if (A[i] > B[i]) {
- if (P[i] < B[i]) {
- return DISJOINT;
- } else if (P[i] > B[i]) {
- if (P[i] < A[i]) {
- return INTERSECT;
- } else if (P[i] > A[i]) {
- return DISJOINT;
- } else {
- // assert(P[i] == A[i]);
- return SHAREVERTEX;
- }
- } else {
- // assert(P[i] == B[i]);
- return SHAREVERTEX;
- }
- }
- // i-th coordinates are equal, try i+1-th;
- i++;
- } while (i < 3);
- // Should never be here.
- assert(i >= 3);
- return DISJOINT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// edge_edge_coplanar_inter() Test whether two edges (ab) and (pq) are //
-// intersecting or not. //
-// //
-// ab and pq are coplanar. Possible cases are ab and pq are disjointed, or //
-// proper intersecting (intersect at a point other than their vertices), or //
-// collinear and intersecting, or sharing at a vertex, or ab and pq are co- //
-// incident (i.e., the same edge). //
-// //
-// A reference point R is required, which is exactly not coplanar with these //
-// two edges. Since the caller know these two edges are coplanar, it must //
-// be able to provide (or calculate) such a point. //
-// //
-// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
-// SHAREEDGE, and INTERSECT. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-edge_edge_coplanar_inter(REAL* A, REAL* B, REAL* P, REAL* Q, REAL* R)
-{
- REAL s1, s2, s3, s4;
-
- assert(R != NULL);
-
- s1 = orient3d(A, B, R, P);
- s2 = orient3d(A, B, R, Q);
- if (s1 * s2 > 0.0) {
- // Both p and q are at the same side of ab.
- return DISJOINT;
- }
- s3 = orient3d(P, Q, R, A);
- s4 = orient3d(P, Q, R, B);
- if (s3 * s4 > 0.0) {
- // Both a and b are at the same side of pq.
- return DISJOINT;
- }
-
- // Possible degenerate cases are:
- // (1) Only one of p and q is collinear with ab;
- // (2) Both p and q are collinear with ab;
- // (3) Only one of a and b is collinear with pq.
- enum intersectresult abp, abq;
- enum intersectresult pqa, pqb;
-
- if (s1 == 0.0) {
- // p is collinear with ab.
- abp = edge_vertex_collinear_inter(A, B, P);
- if (abp == INTERSECT) {
- // p is inside ab.
- return INTERSECT;
- }
- if (s2 == 0.0) {
- // q is collinear with ab. Case (2).
- abq = edge_vertex_collinear_inter(A, B, Q);
- if (abq == INTERSECT) {
- // q is inside ab.
- return INTERSECT;
- }
- if (abp == SHAREVERTEX && abq == SHAREVERTEX) {
- // ab and pq are identical.
- return SHAREEDGE;
- }
- pqa = edge_vertex_collinear_inter(P, Q, A);
- if (pqa == INTERSECT) {
- // a is inside pq.
- return INTERSECT;
- }
- pqb = edge_vertex_collinear_inter(P, Q, B);
- if (pqb == INTERSECT) {
- // b is inside pq.
- return INTERSECT;
- }
- if (abp == SHAREVERTEX || abq == SHAREVERTEX) {
- // either p or q is coincident with a or b.
- // ONLY one case is possible, otherwise, shoule be SHAREEDGE.
- assert(abp ^ abq);
- return SHAREVERTEX;
- }
- // The last case. They are disjointed.
- assert((abp == DISJOINT) && (abp == abq && abq == pqa && pqa == pqb));
- return DISJOINT;
- } else {
- // p is collinear with ab. Case (1).
- assert(abp == SHAREVERTEX || abp == DISJOINT);
- return abp;
- }
- }
- // p is NOT collinear with ab.
- if (s2 == 0.0) {
- // q is collinear with ab. Case (1).
- abq = edge_vertex_collinear_inter(A, B, Q);
- assert(abq == SHAREVERTEX || abq == DISJOINT || abq == INTERSECT);
- return abq;
- }
-
- // We have found p and q are not collinear with ab. However, it is still
- // possible that a or b is collinear with pq (ONLY one of a and b).
- if (s3 == 0.0) {
- // a is collinear with pq. Case (3).
- assert(s4 != 0.0);
- pqa = edge_vertex_collinear_inter(P, Q, A);
- // This case should have been detected in above.
- assert(pqa != SHAREVERTEX);
- assert(pqa == INTERSECT || pqa == DISJOINT);
- return pqa;
- }
- if (s4 == 0.0) {
- // b is collinear with pq. Case (3).
- assert(s3 != 0.0);
- pqb = edge_vertex_collinear_inter(P, Q, B);
- // This case should have been detected in above.
- assert(pqb != SHAREVERTEX);
- assert(pqb == INTERSECT || pqb == DISJOINT);
- return pqb;
- }
-
- // ab and pq are intersecting properly.
- return INTERSECT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Notations //
-// //
-// Let ABC be the plane passes through a, b, and c; ABC+ be the halfspace //
-// including the set of all points x, such that orient3d(a, b, c, x) > 0; //
-// ABC- be the other halfspace, such that for each point x in ABC-, //
-// orient3d(a, b, c, x) < 0. For the set of x which are on ABC, orient3d(a, //
-// b, c, x) = 0. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangle_vertex_coplanar_inter() Test whether a triangle (abc) and a //
-// point (p) are intersecting or not. //
-// //
-// abc and p are coplanar. Possible cases are p is inside abc, or on an edge //
-// of, or coincident with a vertex of, or outside abc. //
-// //
-// A reference point R is required, which is exactly not coplanar with the //
-// triangle and the vertex. Since the caller know they are coplanar, it must //
-// be able to provide (or calculate) such a point. //
-// //
-// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
-// and INTERSECT. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-triangle_vertex_coplanar_inter(REAL* A, REAL* B, REAL* C, REAL* P, REAL* R)
-{
- REAL s1, s2, s3;
- int sign;
-
- assert(R != (REAL *) NULL);
-
- // Adjust the orientation of a, b, c and r, so that we can assume that
- // r is strictly in ABC- (i.e., r is above ABC wrt. right-hand rule).
- s1 = orient3d(A, B, C, R);
- assert(s1 != 0.0);
- sign = s1 < 0.0 ? 1 : -1;
-
- // Test starts from here.
- s1 = orient3d(A, B, R, P) * sign;
- if (s1 < 0.0) {
- // p is in ABR-.
- return DISJOINT;
- }
- s2 = orient3d(B, C, R, P) * sign;
- if (s2 < 0.0) {
- // p is in BCR-.
- return DISJOINT;
- }
- s3 = orient3d(C, A, R, P) * sign;
- if (s3 < 0.0) {
- // p is in CAR-.
- return DISJOINT;
- }
- if (s1 == 0.0) {
- // p is on ABR.
- if (s2 == 0.0) {
- // p is on BCR.
- assert(s3 > 0.0);
- // p is coincident with b.
- return SHAREVERTEX;
- }
- if (s3 == 0.0) {
- // p is on CAR.
- // p is coincident with a.
- return SHAREVERTEX;
- }
- // p is on edge ab.
- return INTERSECT;
- }
- // p is in ABR+.
- if (s2 == 0.0) {
- // p is on BCR.
- if (s3 == 0.0) {
- // p is on CAR.
- // p is coincident with c.
- return SHAREVERTEX;
- }
- // p is on edge bc.
- return INTERSECT;
- }
- if (s3 == 0.0) {
- // p is on CAR.
- // p is on edge ca.
- return INTERSECT;
- }
-
- // p is strictly inside abc.
- return INTERSECT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangle_edge_coplanar_inter() Test whether a triangle (abc) and an //
-// edge (pq) are intersecting or not. //
-// //
-// A reference point R is required, which is exactly not coplanar with the //
-// triangle and the edge. Since the caller know they are coplanar, it must //
-// be able to provide (or calculate) such a point. //
-// //
-// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
-// SHAREEDGE, and INTERSECT. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-triangle_edge_coplanar_inter(REAL* A, REAL* B, REAL* C, REAL* P, REAL* Q,
- REAL* R)
-{
- enum intersectresult abpq, bcpq, capq;
- enum intersectresult abcp, abcq;
-
- // Test if pq is intersecting one of edges of abc.
- abpq = edge_edge_coplanar_inter(A, B, P, Q, R);
- if (abpq == INTERSECT || abpq == SHAREEDGE) {
- return abpq;
- }
- bcpq = edge_edge_coplanar_inter(B, C, P, Q, R);
- if (bcpq == INTERSECT || bcpq == SHAREEDGE) {
- return bcpq;
- }
- capq = edge_edge_coplanar_inter(C, A, P, Q, R);
- if (capq == INTERSECT || capq == SHAREEDGE) {
- return capq;
- }
-
- // Test if p and q is inside abc.
- abcp = triangle_vertex_coplanar_inter(A, B, C, P, R);
- if (abcp == INTERSECT) {
- return INTERSECT;
- }
- abcq = triangle_vertex_coplanar_inter(A, B, C, Q, R);
- if (abcq == INTERSECT) {
- return INTERSECT;
- }
-
- // Combine the test results of edge intersectings and triangle insides
- // to detect whether abc and pq are sharing vertex or disjointed.
- if (abpq == SHAREVERTEX) {
- // p or q is coincident with a or b.
- assert(abcp ^ abcq);
- return SHAREVERTEX;
- }
- if (bcpq == SHAREVERTEX) {
- // p or q is coincident with b or c.
- assert(abcp ^ abcq);
- return SHAREVERTEX;
- }
- if (capq == SHAREVERTEX) {
- // p or q is coincident with c or a.
- assert(abcp ^ abcq);
- return SHAREVERTEX;
- }
-
- // They are disjointed.
- return DISJOINT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangle_edge_inter_tail() Test whether a triangle (abc) and an edge //
-// (pq) are intersecting or not. //
-// //
-// s1 and s2 are results of pre-performed orientation tests. s1 = orient3d( //
-// a, b, c, p); s2 = orient3d(a, b, c, q). //
-// //
-// To separate this routine from triangle_edge_inter() can save two //
-// orientation tests in triangle_triangle_inter(). //
-// //
-// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
-// SHAREEDGE, and INTERSECT. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-triangle_edge_inter_tail(REAL* A, REAL* B, REAL* C, REAL* P, REAL* Q, REAL s1,
- REAL s2)
-{
- REAL s3, s4, s5;
- int sign;
-
- if (s1 * s2 > 0.0) {
- // p, q are at the same halfspace of ABC, no intersection.
- return DISJOINT;
- }
-
- if (s1 * s2 < 0.0) {
- // p, q are both not on ABC (and not sharing vertices, edges of abc).
- // Adjust the orientation of a, b, c and p, so that we can assume that
- // p is strictly in ABC-, and q is strictly in ABC+.
- sign = s1 < 0.0 ? 1 : -1;
- s3 = orient3d(A, B, P, Q) * sign;
- if (s3 < 0.0) {
- // q is at ABP-.
- return DISJOINT;
- }
- s4 = orient3d(B, C, P, Q) * sign;
- if (s4 < 0.0) {
- // q is at BCP-.
- return DISJOINT;
- }
- s5 = orient3d(C, A, P, Q) * sign;
- if (s5 < 0.0) {
- // q is at CAP-.
- return DISJOINT;
- }
- if (s3 == 0.0) {
- // q is on ABP.
- if (s4 == 0.0) {
- // q is on BCP (and q must in CAP+).
- assert(s5 > 0.0);
- // pq intersects abc at vertex b.
- return SHAREVERTEX;
- }
- if (s5 == 0.0) {
- // q is on CAP (and q must in BCP+).
- // pq intersects abc at vertex a.
- return SHAREVERTEX;
- }
- // q in both BCP+ and CAP+.
- // pq crosses ab properly.
- return INTERSECT;
- }
- // q is in ABP+;
- if (s4 == 0.0) {
- // q is on BCP.
- if (s5 == 0.0) {
- // q is on CAP.
- // pq intersects abc at vertex c.
- return SHAREVERTEX;
- }
- // pq crosses bc properly.
- return INTERSECT;
- }
- // q is in BCP+;
- if (s5 == 0.0) {
- // q is on CAP.
- // pq crosses ca properly.
- return INTERSECT;
- }
- // q is in CAP+;
- // pq crosses abc properly.
- return INTERSECT;
- }
-
- if (s1 != 0.0 || s2 != 0.0) {
- // Either p or q is coplanar with abc. ONLY one of them is possible.
- if (s1 == 0.0) {
- // p is coplanar with abc, q can be used as reference point.
- assert(s2 != 0.0);
- return triangle_vertex_coplanar_inter(A, B, C, P, Q);
- } else {
- // q is coplanar with abc, p can be used as reference point.
- assert(s2 == 0.0);
- return triangle_vertex_coplanar_inter(A, B, C, Q, P);
- }
- }
-
- // pq is coplanar with abc. Calculate a point which is exactly
- // non-coplanar with a, b, and c.
- REAL R[3], N[3];
- REAL ax, ay, az, bx, by, bz;
-
- ax = A[0] - B[0];
- ay = A[1] - B[1];
- az = A[2] - B[2];
- bx = A[0] - C[0];
- by = A[1] - C[1];
- bz = A[2] - C[2];
- N[0] = ay * bz - by * az;
- N[1] = az * bx - bz * ax;
- N[2] = ax * by - bx * ay;
- // The normal should not be a zero vector.
- assert((fabs(N[0]) + fabs(N[1]) + fabs(N[2])) > 0.0);
- // The reference point R is lifted from A to the normal direction with
- // a non-zero distance.
- R[0] = N[0] + A[0];
- R[1] = N[1] + A[1];
- R[2] = N[2] + A[2];
- // Becareful the case: if the non-zero component(s) in N is smaller than
- // the machine epsilon (i.e., 2^(-16) for double), R will exactly equal
- // to A due to the round-off error. Do check if it is.
- if (R[0] == A[0] && R[1] == A[1] && R[2] == A[2]) {
- int i, j;
- for (i = 0; i < 3; i++) {
- assert (R[i] == A[i]);
- j = 2;
- do {
- if (N[i] > 0.0) {
- N[i] += (j * macheps);
- } else {
- N[i] -= (j * macheps);
- }
- R[i] = N[i] + A[i];
- j *= 2;
- } while (R[i] == A[i]);
- }
- }
-
- return triangle_edge_coplanar_inter(A, B, C, P, Q, R);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangle_edge_inter() Test whether a triangle (abc) and an edge (pq) //
-// are intersecting or not. //
-// //
-// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
-// SHAREEDGE, and INTERSECT. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-triangle_edge_inter(REAL* A, REAL* B, REAL* C, REAL* P, REAL* Q)
-{
- REAL s1, s2;
-
- // Test the locations of p and q with respect to ABC.
- s1 = orient3d(A, B, C, P);
- s2 = orient3d(A, B, C, Q);
-
- return triangle_edge_inter_tail(A, B, C, P, Q, s1, s2);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangle_triangle_inter() Test whether two triangle (abc) and (opq) //
-// are intersecting or not. //
-// //
-// The return value indicates one of the five cases: DISJOINT, SHAREVERTEX, //
-// SHAREEDGE, SHAREFACE, and INTERSECT. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::intersectresult tetgenmesh::
-triangle_triangle_inter(REAL* A, REAL* B, REAL* C, REAL* O, REAL* P, REAL* Q)
-{
- REAL s_o, s_p, s_q;
- REAL s_a, s_b, s_c;
-
- s_o = orient3d(A, B, C, O);
- s_p = orient3d(A, B, C, P);
- s_q = orient3d(A, B, C, Q);
- if ((s_o * s_p > 0.0) && (s_o * s_q > 0.0)) {
- // o, p, q are all in the same halfspace of ABC.
- return DISJOINT;
- }
-
- s_a = orient3d(O, P, Q, A);
- s_b = orient3d(O, P, Q, B);
- s_c = orient3d(O, P, Q, C);
- if ((s_a * s_b > 0.0) && (s_a * s_c > 0.0)) {
- // a, b, c are all in the same halfspace of OPQ.
- return DISJOINT;
- }
-
- enum intersectresult abcop, abcpq, abcqo;
- int shareedge = 0;
-
- abcop = triangle_edge_inter_tail(A, B, C, O, P, s_o, s_p);
- if (abcop == INTERSECT) {
- return INTERSECT;
- } else if (abcop == SHAREEDGE) {
- shareedge++;
- }
- abcpq = triangle_edge_inter_tail(A, B, C, P, Q, s_p, s_q);
- if (abcpq == INTERSECT) {
- return INTERSECT;
- } else if (abcpq == SHAREEDGE) {
- shareedge++;
- }
- abcqo = triangle_edge_inter_tail(A, B, C, Q, O, s_q, s_o);
- if (abcqo == INTERSECT) {
- return INTERSECT;
- } else if (abcqo == SHAREEDGE) {
- shareedge++;
- }
- if (shareedge == 3) {
- // opq are coincident with abc.
- return SHAREFACE;
- }
- // It is only possible either no share edge or one.
- assert(shareedge == 0 || shareedge == 1);
-
- // Continue to detect whether opq and abc are intersecting or not.
- enum intersectresult opqab, opqbc, opqca;
-
- opqab = triangle_edge_inter_tail(O, P, Q, A, B, s_a, s_b);
- if (opqab == INTERSECT) {
- return INTERSECT;
- }
- opqbc = triangle_edge_inter_tail(O, P, Q, B, C, s_b, s_c);
- if (opqbc == INTERSECT) {
- return INTERSECT;
- }
- opqca = triangle_edge_inter_tail(O, P, Q, C, A, s_c, s_a);
- if (opqca == INTERSECT) {
- return INTERSECT;
- }
-
- // At this point, two triangles are not intersecting and not coincident.
- // They may be share an edge, or share a vertex, or disjoint.
- if (abcop == SHAREEDGE) {
- assert(abcpq == SHAREVERTEX && abcqo == SHAREVERTEX);
- // op is coincident with an edge of abc.
- return SHAREEDGE;
- }
- if (abcpq == SHAREEDGE) {
- assert(abcop == SHAREVERTEX && abcqo == SHAREVERTEX);
- // pq is coincident with an edge of abc.
- return SHAREEDGE;
- }
- if (abcqo == SHAREEDGE) {
- assert(abcop == SHAREVERTEX && abcpq == SHAREVERTEX);
- // qo is coincident with an edge of abc.
- return SHAREEDGE;
- }
-
- // They may share a vertex or disjoint.
- if (abcop == SHAREVERTEX) {
- // o or p is coincident with a vertex of abc.
- if (abcpq == SHAREVERTEX) {
- // p is the coincident vertex.
- assert(abcqo != SHAREVERTEX);
- } else {
- // o is the coincident vertex.
- assert(abcqo == SHAREVERTEX);
- }
- return SHAREVERTEX;
- }
- if (abcpq == SHAREVERTEX) {
- // q is the coincident vertex.
- assert(abcqo == SHAREVERTEX);
- return SHAREVERTEX;
- }
-
- // They are disjoint.
- return DISJOINT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// iscollinear() Check if three points are collinear with respect to a //
-// given relative tolerance. //
-// //
-// 'epspp' is the relative tolerance provided by caller. The collinearity is //
-// determined by evaluating the angle q between the two vectors formed from //
-// thes three points. If q <= epspp, then they are assumed be collinear. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::iscollinear(REAL* A, REAL* B, REAL* C, REAL epspp)
-{
- REAL V[3], W[3];
- REAL Lv, Lw, d, q;
-
- V[0] = A[0] - B[0];
- V[1] = A[1] - B[1];
- V[2] = A[2] - B[2];
- W[0] = A[0] - C[0];
- W[1] = A[1] - C[1];
- W[2] = A[2] - C[2];
- Lv = sqrt(V[0] * V[0] + V[1] * V[1] + V[2] * V[2]);
- Lw = sqrt(W[0] * W[0] + W[1] * W[1] + W[2] * W[2]);
-
- d = (V[0] * W[0] + V[1] * W[1] + V[2] * W[2]) / (Lv * Lw);
- if (d > 1.0) {
- q = 0.0;
- } else if (d < -1.0) {
- q = 0.0; // q = PI;
- } else {
- q = acos(fabs(d));
- }
-
- return q <= epspp;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// iscoplanar() Check if four points are coplanar with respect to a given //
-// relative tolerance. //
-// //
-// 'vol6' is the six times of the signed volume of the tetrahedron formed by //
-// the four points. 'epspp' is the relative tolerance provided by the caller.//
-// This coplanarity is determined by evaluating the value: //
-// //
-// q = fabs(vol6) / L^3 //
-// //
-// where L is the average edge length of the tetrahedron. If q <= epspp, //
-// then these four points are assumed be coplanar. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-iscoplanar(REAL* k, REAL* l, REAL* m, REAL* n, REAL vol6, REAL epspp)
-{
- REAL L, q;
- REAL x, y, z;
-
- x = k[0] - l[0];
- y = k[1] - l[1];
- z = k[2] - l[2];
- L = sqrt(x * x + y * y + z * z);
- x = l[0] - m[0];
- y = l[1] - m[1];
- z = l[2] - m[2];
- L += sqrt(x * x + y * y + z * z);
- x = m[0] - k[0];
- y = m[1] - k[1];
- z = m[2] - k[2];
- L += sqrt(x * x + y * y + z * z);
- x = k[0] - n[0];
- y = k[1] - n[1];
- z = k[2] - n[2];
- L += sqrt(x * x + y * y + z * z);
- x = l[0] - n[0];
- y = l[1] - n[1];
- z = l[2] - n[2];
- L += sqrt(x * x + y * y + z * z);
- x = m[0] - n[0];
- y = m[1] - n[1];
- z = m[2] - n[2];
- L += sqrt(x * x + y * y + z * z);
- assert(L > 0.0);
- L /= 6.0;
- q = fabs(vol6) / (L * L * L);
-
- return q <= epspp;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// iscospheric() Check if five points are coplanar with respect to a //
-// given relative tolerance. //
-// //
-// The cosphere is determined by comparing the distance between the radius R //
-// of the circumsphere S of the first four points and the distance from the //
-// circumcenter C of S to the fifth points P, i.e., to calculate the value: //
-// //
-// q = fabs(P - C) / R //
-// //
-// If q <= epspp, then these five points are assumed to be cospherical. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-iscospheric(REAL* k, REAL* l, REAL* m, REAL* n, REAL* o, REAL epspp)
-{
- REAL ori, *p5;
- REAL cent[3], R, D, q;
-
- ori = orient3d(k, l, m, n);
- if (iscoplanar(k, l, m, n, ori, epspp)) {
- ori = orient3d(k, l, m, o);
- assert(!iscoplanar(k, l, m, o, ori, epspp));
- circumsphere(k, l, m, o, cent, &R);
- p5 = n;
- } else {
- circumsphere(k, l, m, n, cent, &R);
- p5 = o;
- }
- D = distance(p5, cent);
- q = fabs(D - R) / R;
-
- return q <= epspp;
-}
-
-//
-// End of geometric tests
-//
-
-//
-// Begin of Geometric quantities calculators
-//
-
-// distance() computs the Euclidean distance between two points.
-inline REAL tetgenmesh::distance(REAL* p1, REAL* p2)
-{
- return sqrt((p2[0] - p1[0]) * (p2[0] - p1[0]) +
- (p2[1] - p1[1]) * (p2[1] - p1[1]) +
- (p2[2] - p1[2]) * (p2[2] - p1[2]));
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// shortdistance() Returns the shortest distance from point p to a line //
-// defined by two points e1 and e2. //
-// //
-// First compute the projection length l_p of the vector v1 = p - e1 along //
-// the vector v2 = e2 - e1. Then Pythagoras' Theorem is used to compute the //
-// shortest distance. //
-// //
-// This routine allows that p is collinear with the line. In this case, the //
-// return value is zero. The two points e1 and e2 should not be identical. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-REAL tetgenmesh::shortdistance(REAL* p, REAL* e1, REAL* e2)
-{
- REAL v1[3], v2[3];
- REAL len, l_p;
-
- v1[0] = e2[0] - e1[0];
- v1[1] = e2[1] - e1[1];
- v1[2] = e2[2] - e1[2];
- v2[0] = p[0] - e1[0];
- v2[1] = p[1] - e1[1];
- v2[2] = p[2] - e1[2];
-
- len = sqrt(dot(v1, v1));
- assert(len != 0.0);
- v1[0] /= len;
- v1[1] /= len;
- v1[2] /= len;
- l_p = dot(v1, v2);
-
- return sqrt(dot(v2, v2) - l_p * l_p);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// interiorangle() Return the interior angle (0 - 2 * PI) between vectors //
-// o->p1 and o->p2. //
-// //
-// 'n' is the normal of the plane containing face (o, p1, p2). The interior //
-// angle is the total angle rotating from o->p1 around n to o->p2. Exchange //
-// the position of p1 and p2 will get the complement angle of the other one. //
-// i.e., interiorangle(o, p1, p2) = 2 * PI - interiorangle(o, p2, p1). Set //
-// 'n' be NULL if you only want the interior angle between 0 - PI. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-REAL tetgenmesh::interiorangle(REAL* o, REAL* p1, REAL* p2, REAL* n)
-{
- REAL v1[3], v2[3], np[3];
- REAL theta, costheta, lenlen;
- REAL ori, len1, len2;
-
- // Get the interior angle (0 - PI) between o->p1, and o->p2.
- v1[0] = p1[0] - o[0];
- v1[1] = p1[1] - o[1];
- v1[2] = p1[2] - o[2];
- v2[0] = p2[0] - o[0];
- v2[1] = p2[1] - o[1];
- v2[2] = p2[2] - o[2];
- len1 = sqrt(dot(v1, v1));
- len2 = sqrt(dot(v2, v2));
- lenlen = len1 * len2;
- assert(lenlen != 0.0);
- costheta = dot(v1, v2) / lenlen;
- if (costheta > 1.0) {
- costheta = 1.0; // Roundoff.
- } else if (costheta < -1.0) {
- costheta = -1.0; // Roundoff.
- }
- theta = acos(costheta);
- if (n != NULL) {
- // Get a point above the face (o, p1, p2);
- np[0] = o[0] + n[0];
- np[1] = o[1] + n[1];
- np[2] = o[2] + n[2];
- // Adjust theta (0 - 2 * PI).
- ori = orient3d(p1, o, np, p2);
- if (ori > 0.0) {
- theta = 2 * PI - theta;
- }
- }
-
- return theta;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// projpt2edge() Return the projection point from a point to an edge. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::projpt2edge(REAL* p, REAL* e1, REAL* e2, REAL* prj)
-{
- REAL v1[3], v2[3];
- REAL len, l_p;
-
- v1[0] = e2[0] - e1[0];
- v1[1] = e2[1] - e1[1];
- v1[2] = e2[2] - e1[2];
- v2[0] = p[0] - e1[0];
- v2[1] = p[1] - e1[1];
- v2[2] = p[2] - e1[2];
-
- len = sqrt(dot(v1, v1));
- assert(len != 0.0);
- v1[0] /= len;
- v1[1] /= len;
- v1[2] /= len;
- l_p = dot(v1, v2);
-
- prj[0] = e1[0] + l_p * v1[0];
- prj[1] = e1[1] + l_p * v1[1];
- prj[2] = e1[2] + l_p * v1[2];
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// projpt2face() Return the projection point from a point to a face. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::projpt2face(REAL* p, REAL* f1, REAL* f2, REAL* f3, REAL* prj)
-{
- REAL fnormal[3], v1[3];
- REAL len, dist;
-
- // Get the unit face normal.
- facenormal(f1, f2, f3, fnormal, &len);
- assert(len > 0.0);
- fnormal[0] /= len;
- fnormal[1] /= len;
- fnormal[2] /= len;
- // Get the vector v1 = |p - f1|.
- v1[0] = p[0] - f1[0];
- v1[1] = p[1] - f1[1];
- v1[2] = p[2] - f1[2];
- // Get the project distance.
- dist = dot(fnormal, v1);
- assert(fabs(dist) >= b->epsilon);
-
- // Get the project point.
- prj[0] = p[0] - dist * fnormal[0];
- prj[1] = p[1] - dist * fnormal[1];
- prj[2] = p[2] - dist * fnormal[2];
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// facenormal() Calculate the normal of a face given by three points. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::facenormal(REAL* pa, REAL* pb, REAL* pc, REAL* n, REAL* nlen)
-{
- REAL v1[3], v2[3];
-
- v1[0] = pb[0] - pa[0];
- v1[1] = pb[1] - pa[1];
- v1[2] = pb[2] - pa[2];
- v2[0] = pc[0] - pa[0];
- v2[1] = pc[1] - pa[1];
- v2[2] = pc[2] - pa[2];
-
- cross(v1, v2, n);
- if (nlen != (REAL *) NULL) {
- *nlen = sqrt(dot(n, n));
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// edgeorthonormal() Return the unit normal of an edge in a given plane. //
-// //
-// The edge is from e1 to e2, the plane is defined by given an additional //
-// point op, which is non-collinear with the edge. In addition, the side of //
-// the edge in which op lies defines the positive position of the normal. //
-// //
-// Let v1 be the unit vector from e1 to e2, v2 be the unit edge vector from //
-// e1 to op, fn be the unit face normal calculated by fn = v1 x v2. Then the //
-// unit edge normal of e1e2 pointing to op is n = fn x v1. Note, we should //
-// not change the position of fn and v1, otherwise, we get the edge normal //
-// pointing to the other side of op. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::edgeorthonormal(REAL* e1, REAL* e2, REAL* op, REAL* n)
-{
- REAL v1[3], v2[3], fn[3];
- REAL len;
-
- // Get the edge vector v1.
- v1[0] = e2[0] - e1[0];
- v1[1] = e2[1] - e1[1];
- v1[2] = e2[2] - e1[2];
- // Get the edge vector v2.
- v2[0] = op[0] - e1[0];
- v2[1] = op[1] - e1[1];
- v2[2] = op[2] - e1[2];
- // Get the face normal fn = v1 x v2.
- cross(v1, v2, fn);
- // Get the edge normal n pointing to op. n = fn x v1.
- cross(fn, v1, n);
- // Normalize the vector.
- len = sqrt(dot(n, n));
- n[0] /= len;
- n[1] /= len;
- n[2] /= len;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// facedihedral() Return the dihedral angle (in radian) between two //
-// adjoining faces. //
-// //
-// 'pa', 'pb' are the shared edge of these two faces, 'pc1', and 'pc2' are //
-// apexes of these two faces. Return the angle (between 0 to 2*pi) between //
-// the normal of face (pa, pb, pc1) and normal of face (pa, pb, pc2). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-REAL tetgenmesh::facedihedral(REAL* pa, REAL* pb, REAL* pc1, REAL* pc2)
-{
- REAL n1[3], n2[3];
- REAL n1len, n2len;
- REAL costheta, ori;
- REAL theta;
-
- facenormal(pa, pb, pc1, n1, &n1len);
- facenormal(pa, pb, pc2, n2, &n2len);
- costheta = dot(n1, n2) / (n1len * n2len);
- theta = acos(costheta);
- ori = orient3d(pa, pb, pc1, pc2);
- if (ori > 0.0) {
- theta = 2 * PI - theta;
- }
-
- return theta;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetalldihedral() Get all(six) dihedral angles in tetrahedron formed by //
-// vertices a, b, c and d. Return by array adDihed[6]. //
-// //
-// The order in which the dihedrals are assigned matters for computation of //
-// solid angles. The way they're currently set up, combining them as (0,1,2),//
-// (0,3,4), (1,3,5), (2,4,5) gives (in order) solid angles at vertices a, b, //
-// c and d. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-tetalldihedral(point pa, point pb, point pc, point pd, REAL dihed[6])
-{
- REAL n0[3], n1[3], n2[3], n3[3];
- REAL n0len, n1len, n2len, n3len;
- REAL dotp;
-
- facenormal(pc, pb, pd, n0, &n0len);
- facenormal(pa, pc, pd, n1, &n1len);
- facenormal(pb, pa, pd, n2, &n2len);
- facenormal(pa, pb, pc, n3, &n3len);
-
- n0[0] /= n0len; n0[1] /= n0len; n0[2] /= n0len;
- n1[0] /= n1len; n1[1] /= n1len; n1[2] /= n1len;
- n2[0] /= n2len; n2[1] /= n2len; n2[2] /= n2len;
- n3[0] /= n3len; n3[1] /= n3len; n3[2] /= n3len;
-
- dotp = -dot(n0, n1);
- if (dotp > 1.) dotp = 1.;
- else if (dotp < -1.) dotp = -1.;
- dihed[5] = acos(dotp); // Edge CD
-
- dotp = -dot(n0, n2);
- if (dotp > 1.) dotp = 1.;
- else if (dotp < -1.) dotp = -1.;
- dihed[4] = acos(dotp); // Edge BD
-
- dotp = -dot(n0, n3);
- if (dotp > 1.) dotp = 1.;
- else if (dotp < -1.) dotp = -1.;
- dihed[3] = acos(dotp); // Edge BC
-
- dotp = -dot(n1, n2);
- if (dotp > 1.) dotp = 1.;
- else if (dotp < -1.) dotp = -1.;
- dihed[2] = acos(dotp); // Edge AD
-
- dotp = -dot(n1, n3);
- if (dotp > 1.) dotp = 1.;
- else if (dotp < -1.) dotp = -1.;
- dihed[1] = acos(dotp); // Edge AC
-
- dotp = -dot(n2, n3);
- if (dotp > 1.) dotp = 1.;
- else if (dotp < -1.) dotp = -1.;
- dihed[0] = acos(dotp); // Edge AB
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// circumsphere() Calculate the smallest circumsphere (center and radius) //
-// of the given three or four points. //
-// //
-// The circumsphere of four points (a tetrahedron) is unique if they are not //
-// degenerate. If 'pd = NULL', the smallest circumsphere of three points is //
-// the diametral sphere of the triangle if they are not degenerate. //
-// //
-// Return TRUE if the input points are not degenerate and the circumcenter //
-// and circumradius are returned in 'cent' and 'radius' respectively if they //
-// are not NULLs. Otherwise, return FALSE indicated the points are degenrate.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-circumsphere(REAL* pa, REAL* pb, REAL* pc, REAL* pd, REAL* cent, REAL* radius)
-{
- REAL A[3][3], rhs[3], D;
- int indx[3];
-
- // Compute the coefficient matrix A (3x3).
- A[0][0] = pb[0] - pa[0];
- A[0][1] = pb[1] - pa[1];
- A[0][2] = pb[2] - pa[2];
- A[1][0] = pc[0] - pa[0];
- A[1][1] = pc[1] - pa[1];
- A[1][2] = pc[2] - pa[2];
- if (pd != NULL) {
- A[2][0] = pd[0] - pa[0];
- A[2][1] = pd[1] - pa[1];
- A[2][2] = pd[2] - pa[2];
- } else {
- cross(A[0], A[1], A[2]);
- }
-
- // Compute the right hand side vector b (3x1).
- rhs[0] = 0.5 * dot(A[0], A[0]);
- rhs[1] = 0.5 * dot(A[1], A[1]);
- if (pd != NULL) {
- rhs[2] = 0.5 * dot(A[2], A[2]);
- } else {
- rhs[2] = 0.0;
- }
-
- // Solve the 3 by 3 equations use LU decomposition with partial pivoting
- // and backward and forward substitute..
- if (!lu_decmp(A, 3, indx, &D, 0)) {
- if (radius != (REAL *) NULL) *radius = 0.0;
- return false;
- }
- lu_solve(A, 3, indx, rhs, 0);
- if (cent != (REAL *) NULL) {
- cent[0] = pa[0] + rhs[0];
- cent[1] = pa[1] + rhs[1];
- cent[2] = pa[2] + rhs[2];
- }
- if (radius != (REAL *) NULL) {
- *radius = sqrt(rhs[0] * rhs[0] + rhs[1] * rhs[1] + rhs[2] * rhs[2]);
- }
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// inscribedsphere() Compute the radius and center of the biggest //
-// inscribed sphere of a given tetrahedron. //
-// //
-// The tetrahedron is given by its four points, it must not be degenerate. //
-// The center and radius are returned in 'cent' and 'radius' respectively if //
-// they are not NULLs. //
-// //
-// Geometrical fact. For any simplex in d dimension, //
-// r/h1 + r/h2 + ... r/hn = 1 (n <= d + 1); //
-// where r is the radius of inscribed ball, and h is the height of each side //
-// of the simplex. The value of 'r/h' is just the barycenter coordinates of //
-// each vertex of the simplex. Therefore, we can compute the radius and //
-// center of the smallest inscribed ball as following equations: //
-// r = 1.0 / (1/h1 + 1/h2 + ... + 1/hn); (1) //
-// C = r/h1 * P1 + r/h2 * P2 + ... + r/hn * Pn; (2) //
-// where C is the vector of center, P1, P2, .. Pn are vectors of vertices. //
-// Here (2) contains n linear equations with n variables. (h, P) must be a //
-// pair, h is the height from P to its opposite face. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-inscribedsphere(REAL* pa, REAL* pb, REAL* pc, REAL* pd, REAL* cent,
- REAL* radius)
-{
- REAL A[3][3], rhs[3], D;
- REAL N[3][4], H[4]; // Normals (colume vectors) and heights of each face.
- REAL rd;
- int indx[3], i, j;
-
- // Compute the normals of 4 faces.
- A[0][0] = pa[0] - pd[0];
- A[0][1] = pa[1] - pd[1];
- A[0][2] = pa[2] - pd[2];
- A[1][0] = pb[0] - pd[0];
- A[1][1] = pb[1] - pd[1];
- A[1][2] = pb[2] - pd[2];
- A[2][0] = pc[0] - pd[0];
- A[2][1] = pc[1] - pd[1];
- A[2][2] = pc[2] - pd[2];
- // Compute inverse of matrix A, to get the 3 normals of 4 faces.
- lu_decmp(A, 3, indx, &D, 0); // Decompose the matrix just once.
- for (j = 0; j < 3; j++) {
- for (i = 0; i < 3; i++) rhs[i] = 0.0;
- rhs[j] = -1.0;
- lu_solve(A, 3, indx, rhs, 0);
- for (i = 0; i < 3; i++) N[i][j] = rhs[i];
- }
- // Compute the last normal by summing 3 computed vectors, because sum over
- // a closed sufrace is 0.
- N[0][3] = - N[0][0] - N[0][1] - N[0][2];
- N[1][3] = - N[1][0] - N[1][1] - N[1][2];
- N[2][3] = - N[2][0] - N[2][1] - N[2][2];
- // Compute the length of normals.
- for (i = 0; i < 4; i++) {
- // H[i] is the inverse of height of its corresponding face.
- H[i] = sqrt(N[0][i] * N[0][i] + N[1][i] * N[1][i] + N[2][i] * N[2][i]);
- }
- // Compute the radius use eq. (1).
- rd = 1.0 / (H[0] + H[1] + H[2] + H[3]);
- if (radius != (REAL*) NULL) *radius = rd;
- if (cent != (REAL*) NULL) {
- // Compute the center use eq. (2).
- cent[0] = rd * (H[0] * pa[0] + H[1] * pb[0] + H[2] * pc[0] + H[3] * pd[0]);
- cent[1] = rd * (H[0] * pa[1] + H[1] * pb[1] + H[2] * pc[1] + H[3] * pd[1]);
- cent[2] = rd * (H[0] * pa[2] + H[1] * pb[2] + H[2] * pc[2] + H[3] * pd[2]);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// rotatepoint() Create a point by rotating an existing point. //
-// //
-// Create a 3D point by rotating point 'p' with an angle 'rotangle' (in arc //
-// degree) around a rotating axis given by a vector from point 'p1' to 'p2'. //
-// The rotation is according with right-hand rule, i.e., use your right-hand //
-// to grab the axis with your thumber pointing to its positive direction, //
-// your fingers indicate the rotating direction. //
-// //
-// The rotating steps are the following: //
-// 1. Translate vector 'p1->p2' to origin, M1; //
-// 2. Rotate vector around the Y-axis until it lies in the YZ plane, M2; //
-// 3. Rotate vector around the X-axis until it lies on the Z axis, M3; //
-// 4. Perform the rotation of 'p' around the z-axis, M4; //
-// 5. Undo Step 3, M5; //
-// 6. Undo Step 2, M6; //
-// 7. Undo Step 1, M7; //
-// Use matrix multiplication to combine the above sequences, we get: //
-// p0' = T * p0, where T = M7 * M6 * M5 * M4 * M3 * M2 * M1 //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::rotatepoint(REAL* p, REAL rotangle, REAL* p1, REAL* p2)
-{
- REAL T[4][4], pp0[4], p0t[4], p2t[4];
- REAL roty, rotx, alphaR, projlen;
- REAL dx, dy, dz;
-
- initm44(1, 0, 0, -p1[0],
- 0, 1, 0, -p1[1],
- 0, 0, 1, -p1[2],
- 0, 0, 0, 1, T);
- pp0[0] = p[0]; pp0[1] = p[1]; pp0[2] = p[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 1
- pp0[0] = p2[0]; pp0[1] = p2[1]; pp0[2] = p2[2]; pp0[3] = 1.0;
- m4xv4(p2t, T, pp0); // Step 1
-
- // Get the rotation angle around y-axis;
- dx = p2t[0];
- dz = p2t[2];
- projlen = sqrt(dx * dx + dz * dz);
- if (projlen <= (b->epsilon * 1e-2) * longest) {
- roty = 0;
- } else {
- roty = acos(dz / projlen);
- if (dx < 0) {
- roty = -roty;
- }
- }
-
- initm44(cos(-roty), 0, sin(-roty), 0,
- 0, 1, 0, 0,
- -sin(-roty), 0, cos(-roty), 0,
- 0, 0, 0, 1, T);
- pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 2
- pp0[0] = p2t[0]; pp0[1] = p2t[1]; pp0[2] = p2t[2]; pp0[3] = 1.0;
- m4xv4(p2t, T, pp0); // Step 2
-
- // Get the rotation angle around x-axis
- dy = p2t[1];
- dz = p2t[2];
- projlen = sqrt(dy * dy + dz * dz);
- if (projlen <= (b->epsilon * 1e-2) * longest) {
- rotx = 0;
- } else {
- rotx = acos(dz / projlen);
- if (dy < 0) {
- rotx = -rotx;
- }
- }
-
- initm44(1, 0, 0, 0,
- 0, cos(rotx), -sin(rotx), 0,
- 0, sin(rotx), cos(rotx), 0,
- 0, 0, 0, 1, T);
- pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 3
- // pp0[0] = p2t[0]; pp0[1] = p2t[1]; pp0[2] = p2t[2]; pp0[3] = 1.0;
- // m4xv4(p2t, T, pp0); // Step 3
-
- alphaR = rotangle;
- initm44(cos(alphaR), -sin(alphaR), 0, 0,
- sin(alphaR), cos(alphaR), 0, 0,
- 0, 0, 1, 0,
- 0, 0, 0, 1, T);
- pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 4
-
- initm44(1, 0, 0, 0,
- 0, cos(-rotx), -sin(-rotx), 0,
- 0, sin(-rotx), cos(-rotx), 0,
- 0, 0, 0, 1, T);
- pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 5
-
- initm44(cos(roty), 0, sin(roty), 0,
- 0, 1, 0, 0,
- -sin(roty), 0, cos(roty), 0,
- 0, 0, 0, 1, T);
- pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 6
-
- initm44(1, 0, 0, p1[0],
- 0, 1, 0, p1[1],
- 0, 0, 1, p1[2],
- 0, 0, 0, 1, T);
- pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
- m4xv4(p0t, T, pp0); // Step 7
-
- p[0] = p0t[0];
- p[1] = p0t[1];
- p[2] = p0t[2];
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// spherelineint() 3D line sphere (or circle) intersection. //
-// //
-// The line is given by two points p1, and p2, the sphere is centered at c //
-// with radius r. This function returns a pointer array p which first index //
-// indicates the number of intersection point, followed by coordinate pairs. //
-// //
-// The following code are adapted from: http://astronomy.swin.edu.au/pbourke //
-// /geometry/sphereline. Paul Bourke pbourke@swin.edu.au //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::spherelineint(REAL* p1, REAL* p2, REAL* C, REAL R, REAL p[7])
-{
- REAL x1, y1, z1; // P1 coordinates (point of line)
- REAL x2, y2, z2; // P2 coordinates (point of line)
- REAL x3, y3, z3, r; // P3 coordinates and radius (sphere)
- REAL a, b, c, mu, i ;
-
- x1 = p1[0]; y1 = p1[1]; z1 = p1[2];
- x2 = p2[0]; y2 = p2[1]; z2 = p2[2];
- x3 = C[0]; y3 = C[1]; z3 = C[2];
- r = R;
-
- a = (x2 - x1) * (x2 - x1)
- + (y2 - y1) * (y2 - y1)
- + (z2 - z1) * (z2 - z1);
- b = 2 * ( (x2 - x1) * (x1 - x3)
- + (y2 - y1) * (y1 - y3)
- + (z2 - z1) * (z1 - z3) ) ;
- c = (x3 * x3) + (y3 * y3) + (z3 * z3)
- + (x1 * x1) + (y1 * y1) + (z1 * z1)
- - 2 * (x3 * x1 + y3 * y1 + z3 * z1) - (r * r) ;
- i = b * b - 4 * a * c ;
-
- if (i < 0.0) {
- // no intersection
- p[0] = 0.0;
- } else if (i == 0.0) {
- // one intersection
- p[0] = 1.0;
- mu = -b / (2 * a) ;
- p[1] = x1 + mu * (x2 - x1);
- p[2] = y1 + mu * (y2 - y1);
- p[3] = z1 + mu * (z2 - z1);
- } else {
- assert(i > 0.0);
- // two intersections
- p[0] = 2.0;
- // first intersection
- mu = (-b + sqrt((b * b) - 4 * a * c)) / (2 * a);
- p[1] = x1 + mu * (x2 - x1);
- p[2] = y1 + mu * (y2 - y1);
- p[3] = z1 + mu * (z2 - z1);
- // second intersection
- mu = (-b - sqrt((b * b) - 4 * a * c)) / (2 * a);
- p[4] = x1 + mu * (x2 - x1);
- p[5] = y1 + mu * (y2 - y1);
- p[6] = z1 + mu * (z2 - z1);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// linelineint() Calculate The shortest line between two lines in 3D. //
-// //
-// Two 3D lines generally don't intersect at a point, they may be parallel ( //
-// no intersections), or they may be coincident (infinite intersections) but //
-// most often only their projection onto a plane intersect. When they don't //
-// exactly intersect at a point they can be connected by a line segment, the //
-// shortest line segment is unique and is often considered to be their inter-//
-// section in 3D. //
-// //
-// The following code are adapted from: http://astronomy.swin.edu.au/pbourke //
-// /geometry/lineline3d. Paul Bourke pbourke@swin.edu.au //
-// //
-// Calculate the line segment PaPb that is the shortest route between two //
-// lines P1P2 and P3P4. This function returns a pointer array p which first //
-// index indicates there exists solution or not, 0 means no solution, 1 meas //
-// has solution followed by two coordinate pairs. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::linelineint(REAL *p1,REAL *p2, REAL *p3, REAL *p4, REAL p[7])
-{
- REAL p13[3], p43[3], p21[3];
- REAL d1343, d4321, d1321, d4343, d2121;
- REAL numer, denom;
- REAL mua, mub;
-
- p13[0] = p1[0] - p3[0];
- p13[1] = p1[1] - p3[1];
- p13[2] = p1[2] - p3[2];
- p43[0] = p4[0] - p3[0];
- p43[1] = p4[1] - p3[1];
- p43[2] = p4[2] - p3[2];
- if (p43[0] == 0.0 && p43[1] == 0.0 && p43[2] == 0.0) {
- p[0] = 0.0;
- return;
- }
-
- p21[0] = p2[0] - p1[0];
- p21[1] = p2[1] - p1[1];
- p21[2] = p2[2] - p1[2];
- if (p21[0] == 0.0 && p21[1] == 0.0 && p21[2] == 0.0) {
- p[0] = 0.0;
- return;
- }
-
- d1343 = p13[0] * p43[0] + p13[1] * p43[1] + p13[2] * p43[2];
- d4321 = p43[0] * p21[0] + p43[1] * p21[1] + p43[2] * p21[2];
- d1321 = p13[0] * p21[0] + p13[1] * p21[1] + p13[2] * p21[2];
- d4343 = p43[0] * p43[0] + p43[1] * p43[1] + p43[2] * p43[2];
- d2121 = p21[0] * p21[0] + p21[1] * p21[1] + p21[2] * p21[2];
-
- denom = d2121 * d4343 - d4321 * d4321;
- if (denom == 0.0) {
- p[0] = 0.0;
- return;
- }
- numer = d1343 * d4321 - d1321 * d4343;
- mua = numer / denom;
- mub = (d1343 + d4321 * mua) / d4343;
-
- p[0] = 1.0;
- p[1] = p1[0] + mua * p21[0];
- p[2] = p1[1] + mua * p21[1];
- p[3] = p1[2] + mua * p21[2];
- p[4] = p3[0] + mub * p43[0];
- p[5] = p3[1] + mub * p43[1];
- p[6] = p3[2] + mub * p43[2];
-}
-
-//
-// End of Geometric quantities calculators
-//
-
-//
-// Begin of memory management routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// dummyinit() Initialize the tetrahedron that fills "outer space" and //
-// the omnipresent subface. //
-// //
-// The tetrahedron that fills "outer space" called 'dummytet', is pointed to //
-// by every tetrahedron and subface on a boundary (be it outer or inner) of //
-// the tetrahedralization. Also, 'dummytet' points to one of the tetrahedron //
-// on the convex hull(until the holes and concavities are carved), making it //
-// possible to find a starting tetrahedron for point location. //
-// //
-// The omnipresent subface,'dummysh', is pointed to by every tetrahedron or //
-// subface that doesn't have a full complement of real subface to point to. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::dummyinit(int tetwords, int shwords)
-{
- unsigned long alignptr;
-
- // Set up 'dummytet', the 'tetrahedron' that occupies "outer space".
- dummytetbase = (tetrahedron *) new char[tetwords * sizeof(tetrahedron)
- + tetrahedrons->alignbytes];
- // Align 'dummytet' on a 'tetrahedrons->alignbytes'-byte boundary.
- alignptr = (unsigned long) dummytetbase;
- dummytet = (tetrahedron *)
- (alignptr + (unsigned long) tetrahedrons->alignbytes
- - (alignptr % (unsigned long) tetrahedrons->alignbytes));
- // Initialize the four adjoining tetrahedra to be "outer space". These
- // will eventually be changed by various bonding operations, but their
- // values don't really matter, as long as they can legally be
- // dereferenced.
- dummytet[0] = (tetrahedron) dummytet;
- dummytet[1] = (tetrahedron) dummytet;
- dummytet[2] = (tetrahedron) dummytet;
- dummytet[3] = (tetrahedron) dummytet;
- // Four null vertex points.
- dummytet[4] = (tetrahedron) NULL;
- dummytet[5] = (tetrahedron) NULL;
- dummytet[6] = (tetrahedron) NULL;
- dummytet[7] = (tetrahedron) NULL;
-
- if (b->useshelles) {
- // Set up 'dummysh', the omnipresent "subface" pointed to by any
- // tetrahedron side or subface end that isn't attached to a real
- // subface.
- dummyshbase = (shellface *) new char[shwords * sizeof(shellface)
- + subfaces->alignbytes];
- // Align 'dummysh' on a 'subfaces->alignbytes'-byte boundary.
- alignptr = (unsigned long) dummyshbase;
- dummysh = (shellface *)
- (alignptr + (unsigned long) subfaces->alignbytes
- - (alignptr % (unsigned long) subfaces->alignbytes));
- // Initialize the three adjoining subfaces to be the omnipresent
- // subface. These will eventually be changed by various bonding
- // operations, but their values don't really matter, as long as they
- // can legally be dereferenced.
- dummysh[0] = (shellface) dummysh;
- dummysh[1] = (shellface) dummysh;
- dummysh[2] = (shellface) dummysh;
- // Three null vertex points.
- dummysh[3] = (shellface) NULL;
- dummysh[4] = (shellface) NULL;
- dummysh[5] = (shellface) NULL;
- // Initialize the two adjoining tetrahedra to be "outer space".
- dummysh[6] = (shellface) dummytet;
- dummysh[7] = (shellface) dummytet;
- // Initialize the three adjoining subsegments to be "out boundary".
- dummysh[8] = (shellface) dummysh;
- dummysh[9] = (shellface) dummysh;
- dummysh[10] = (shellface) dummysh;
- // Initialize the pointer to badface structure.
- dummysh[11] = (shellface) NULL;
- // Initialize the four adjoining subfaces of 'dummytet' to be the
- // omnipresent subface.
- dummytet[8 ] = (tetrahedron) dummysh;
- dummytet[9 ] = (tetrahedron) dummysh;
- dummytet[10] = (tetrahedron) dummysh;
- dummytet[11] = (tetrahedron) dummysh;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// initializepointpool() Calculate the size of the point data structure //
-// and initialize its memory pool. //
-// //
-// This routine also computes the 'pointmarkindex' and 'point2simindex' //
-// indices used to find values within each point. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::initializepointpool()
-{
- enum wordtype wtype;
- int pointsize;
-
- // The index within each point at which a element pointer is found. Ensure
- // the index is aligned to a sizeof(tetrahedron)-byte address.
- point2simindex = ((3 + in->numberofpointattributes) * sizeof(REAL) +
- sizeof(tetrahedron) - 1) / sizeof(tetrahedron);
- if (b->plc || b->refine) {
- // Increase the point size by two pointers. One points to a simplex:
- // - a tetrahedron containing it, read by point2tet();
- // - a subface containing it, read by point2sh();
- // - a (sharp) subsegment it relates, read by point2sh();
- // - a (duplicated) point of it, read by point2pt();
- // and one points to another point (its parent, used in conforming
- // Delaunay meshing algorithm), read by point2ppt().
- pointsize = (point2simindex + 2) * sizeof(tetrahedron);
- } else {
- pointsize = point2simindex * sizeof(tetrahedron);
- }
- // The index within each point at which the boundary marker is found,
- // Ensure the point marker is aligned to a sizeof(int)-byte address.
- pointmarkindex = (pointsize + sizeof(int) - 1) / sizeof(int);
- // Now point size is the REALs (inidcated by vertexmarkindex) plus:
- // - an integer for boundary marker;
- // - an integer for vertex type;
- pointsize = (pointmarkindex + 2) * sizeof(int);
- // Decide the wordtype used in vertex pool.
- wtype = (sizeof(REAL) >= sizeof(tetrahedron)) ? FLOATINGPOINT : POINTER;
- // Initialize the pool of vertices.
- points = new memorypool(pointsize, VERPERBLOCK, wtype, 0);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// initializetetshpools() Calculate the sizes of the tetrahedron and //
-// subface data structures and initialize their //
-// memory pools. //
-// //
-// This routine also computes the 'highorderindex', 'elemattribindex', and //
-// 'volumeboundindex' indices used to find values within each tetrahedron. //
-// //
-// There are two types of boundary elements, whihc are subfaces and subsegs, //
-// they are stored in seperate pools. However, the data structures of them //
-// are the same. A subsegment can be regarded as a degenerate subface, i.e.,//
-// one of its three corners is not used. We set the apex of it be 'NULL' to //
-// distinguish it's a subsegment. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::initializetetshpools()
-{
- int elesize, shsize;
-
- // The number of bytes occupied by a tetrahedron. There are four pointers
- // to other tetrahedra, four pointers to corners, and possibly four
- // pointers to subfaces.
- elesize = (8 + b->useshelles * 4) * sizeof(tetrahedron);
- // The index within each element at which its attributes are found, where
- // the index is measured in REALs.
- elemattribindex = (elesize + sizeof(REAL) - 1) / sizeof(REAL);
- // The index within each element at which the maximum voulme bound is
- // found, where the index is measured in REALs. Note that if the
- // `b->regionattrib' flag is set, an additional attribute will be added.
- volumeboundindex = elemattribindex + in->numberoftetrahedronattributes
- + b->regionattrib;
- // If element attributes or an constraint are needed, increase the number
- // of bytes occupied by an element.
- if (b->varvolume) {
- elesize = (volumeboundindex + 1) * sizeof(REAL);
- } else if (in->numberoftetrahedronattributes + b->regionattrib > 0) {
- elesize = volumeboundindex * sizeof(REAL);
- }
- // If the high order elements are required (-o2 switch is used), an
- // additional pointer pointed to the list of extra nodes is allocated
- // for each element.
- if (b->order == 2) {
- highorderindex = (elesize + sizeof(int) - 1) / sizeof(int);
- elesize = (highorderindex + 1) * sizeof(int);
- }
- // If element neighbor graph is requested, make sure there's room to
- // store an integer index in each element. This integer index can
- // occupy the same space as the subface pointers.
- if (b->neighout && (elesize <= 8 * sizeof(tetrahedron))) {
- elesize = 8 * sizeof(tetrahedron) + sizeof(int);
- }
- // Having determined the memory size of an element, initialize the pool.
- tetrahedrons = new memorypool(elesize, ELEPERBLOCK, POINTER, 8);
-
- if (b->useshelles) {
- // The number of bytes occupied by a subface. The list of pointers
- // stored in a subface are: three to other subfaces, three to corners,
- // three to subsegments, two to tetrahedra, and one to a badface.
- shsize = 12 * sizeof(shellface);
- // The index within each subface at which the maximum area bound is
- // found, where the index is measured in REALs.
- areaboundindex = (shsize + sizeof(REAL) - 1) / sizeof(REAL);
- // If -q switch is in use, increase the number of bytes occupied by
- // a subface for saving maximum area bound.
- if (b->quality) {
- shsize = (areaboundindex + 1) * sizeof(REAL);
- } else {
- shsize = areaboundindex * sizeof(REAL);
- }
- // The index within subface at which the facet marker is found. Ensure
- // the marker is aligned to a sizeof(int)-byte address.
- shmarkindex = (shsize + sizeof(int) - 1) / sizeof(int);
- // Increase the number of bytes by two integers, one for facet marker,
- // and one for shellface type.
- shsize = (shmarkindex + 2) * sizeof(int);
- // Initialize the pool of subfaces. Each subface record is eight-byte
- // aligned so it has room to store an edge version (from 0 to 5) in
- // the least three bits.
- subfaces = new memorypool(shsize, SUBPERBLOCK, POINTER, 8);
- // Initialize the pool of subsegments. The subsegment's record is same
- // with subface.
- subsegs = new memorypool(shsize, SUBPERBLOCK, POINTER, 8);
- // Initialize the "outer space" tetrahedron and omnipresent subface.
- dummyinit(tetrahedrons->itemwords, subfaces->itemwords);
- } else {
- // Initialize the "outer space" tetrahedron.
- dummyinit(tetrahedrons->itemwords, 0);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetrahedrondealloc() Deallocate space for a tet., marking it dead. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::tetrahedrondealloc(tetrahedron *dyingtetrahedron)
-{
- // Set tetrahedron's vertices to NULL. This makes it possible to detect
- // dead tetrahedra when traversing the list of all tetrahedra.
- dyingtetrahedron[4] = (tetrahedron) NULL;
- dyingtetrahedron[5] = (tetrahedron) NULL;
- dyingtetrahedron[6] = (tetrahedron) NULL;
- dyingtetrahedron[7] = (tetrahedron) NULL;
- tetrahedrons->dealloc((void *) dyingtetrahedron);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetrahedrontraverse() Traverse the tetrahedra, skipping dead ones. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::tetrahedron* tetgenmesh::tetrahedrontraverse()
-{
- tetrahedron *newtetrahedron;
-
- do {
- newtetrahedron = (tetrahedron *) tetrahedrons->traverse();
- if (newtetrahedron == (tetrahedron *) NULL) {
- return (tetrahedron *) NULL;
- }
- } while (newtetrahedron[7] == (tetrahedron) NULL); // Skip dead ones.
- return newtetrahedron;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// shellfacedealloc() Deallocate space for a shellface, marking it dead. //
-// Used both for dealloc a subface and subsegment. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::shellfacedealloc(memorypool *pool, shellface *dyingsh)
-{
- // Set shellface's vertices to NULL. This makes it possible to detect dead
- // shellfaces when traversing the list of all shellfaces.
- dyingsh[3] = (shellface) NULL;
- dyingsh[4] = (shellface) NULL;
- dyingsh[5] = (shellface) NULL;
- pool->dealloc((void *) dyingsh);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// shellfacetraverse() Traverse the subfaces, skipping dead ones. Used //
-// for both subfaces and subsegments pool traverse. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::shellface* tetgenmesh::shellfacetraverse(memorypool *pool)
-{
- shellface *newshellface;
-
- do {
- newshellface = (shellface *) pool->traverse();
- if (newshellface == (shellface *) NULL) {
- return (shellface *) NULL;
- }
- } while (newshellface[3] == (shellface) NULL); // Skip dead ones.
- return newshellface;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// badfacedealloc() Deallocate space for a badface, marking it dead. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::badfacedealloc(memorypool *pool, badface *dying)
-{
- // Set badface's forg to NULL. This makes it possible to detect dead
- // ones when traversing the list of all items.
- dying->forg = (point) NULL;
- pool->dealloc((void *) dying);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// badfacetraverse() Traverse the pools, skipping dead ones. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::badface* tetgenmesh::badfacetraverse(memorypool *pool)
-{
- badface *newsh;
-
- do {
- newsh = (badface *) pool->traverse();
- if (newsh == (badface *) NULL) {
- return (badface *) NULL;
- }
- } while (newsh->forg == (point) NULL); // Skip dead ones.
- return newsh;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// pointdealloc() Deallocate space for a point, marking it dead. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::pointdealloc(point dyingpoint)
-{
- // Mark the point as dead. This makes it possible to detect dead points
- // when traversing the list of all points.
- setpointtype(dyingpoint, DEADVERTEX);
- points->dealloc((void *) dyingpoint);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// pointtraverse() Traverse the points, skipping dead ones. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::point tetgenmesh::pointtraverse()
-{
- point newpoint;
-
- do {
- newpoint = (point) points->traverse();
- if (newpoint == (point) NULL) {
- return (point) NULL;
- }
- } while (pointtype(newpoint) == DEADVERTEX); // Skip dead ones.
- return newpoint;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// maketetrahedron() Create a new tetrahedron. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::maketetrahedron(triface *newtet)
-{
- newtet->tet = (tetrahedron *) tetrahedrons->alloc();
- // Initialize the four adjoining tetrahedra to be "outer space".
- newtet->tet[0] = (tetrahedron) dummytet;
- newtet->tet[1] = (tetrahedron) dummytet;
- newtet->tet[2] = (tetrahedron) dummytet;
- newtet->tet[3] = (tetrahedron) dummytet;
- // Four NULL vertices.
- newtet->tet[4] = (tetrahedron) NULL;
- newtet->tet[5] = (tetrahedron) NULL;
- newtet->tet[6] = (tetrahedron) NULL;
- newtet->tet[7] = (tetrahedron) NULL;
- // Initialize the four adjoining subfaces to be the omnipresent subface.
- if (b->useshelles) {
- newtet->tet[8 ] = (tetrahedron) dummysh;
- newtet->tet[9 ] = (tetrahedron) dummysh;
- newtet->tet[10] = (tetrahedron) dummysh;
- newtet->tet[11] = (tetrahedron) dummysh;
- }
- for (int i = 0; i < in->numberoftetrahedronattributes; i++) {
- setelemattribute(newtet->tet, i, 0.0);
- }
- if (b->varvolume) {
- setvolumebound(newtet->tet, -1.0);
- }
- // Initialize the location and version to be Zero.
- newtet->loc = 0;
- newtet->ver = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// makeshellface() Create a new shellface with version zero. Used for //
-// both subfaces and seusegments. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::makeshellface(memorypool *pool, face *newface)
-{
- newface->sh = (shellface *) pool->alloc();
- //Initialize the three adjoining subfaces to be the omnipresent subface.
- newface->sh[0] = (shellface) dummysh;
- newface->sh[1] = (shellface) dummysh;
- newface->sh[2] = (shellface) dummysh;
- // Three NULL vertices.
- newface->sh[3] = (shellface) NULL;
- newface->sh[4] = (shellface) NULL;
- newface->sh[5] = (shellface) NULL;
- // Initialize the two adjoining tetrahedra to be "outer space".
- newface->sh[6] = (shellface) dummytet;
- newface->sh[7] = (shellface) dummytet;
- // Initialize the three adjoining subsegments to be the omnipresent
- // subsegments.
- newface->sh [8] = (shellface) dummysh;
- newface->sh [9] = (shellface) dummysh;
- newface->sh[10] = (shellface) dummysh;
- // Initialize the pointer to badface structure.
- newface->sh[11] = (shellface) NULL;
- if (b->quality) {
- // Initialize the maximum area bound.
- setareabound(*newface, 0.0);
- }
- // Set the boundary marker to zero.
- setshellmark(*newface, 0);
- // Set the type be NONPROTSUBFACE.
- setshelltype(*newface, NONPROTSUBFACE);
- // Initialize the version to be Zero.
- newface->shver = 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// makepoint() Create a new point. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::makepoint(point* pnewpoint)
-{
- int ptmark, i;
-
- *pnewpoint = (point) points->alloc();
- // Initialize three coordinates.
- (*pnewpoint)[0] = 0.0;
- (*pnewpoint)[1] = 0.0;
- (*pnewpoint)[2] = 0.0;
- // Initialize the list of user-defined attributes.
- for (i = 0; i < in->numberofpointattributes; i++) {
- (*pnewpoint)[3 + i] = 0.0;
- }
- if (b->plc || b->refine) {
- // Initialize the point-to-tetrahedron filed.
- setpoint2tet(*pnewpoint, NULL);
- // Initialize the other pointer to its parent point.
- setpoint2ppt(*pnewpoint, NULL);
- }
- // Initialize the point marker (starting from in->firstnumber).
- ptmark = (int) points->items - (in->firstnumber == 1 ? 0 : 1);
- setpointmark(*pnewpoint, ptmark);
- // Initialize the point type be UNUSEDVERTEX.
- setpointtype(*pnewpoint, UNUSEDVERTEX);
-}
-
-//
-// End of memory management routines
-//
-
-//
-// Begin of point location routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// randomnation() Generate a random number between 0 and 'choices' - 1. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-unsigned long tetgenmesh::randomnation(unsigned int choices)
-{
- randomseed = (randomseed * 1366l + 150889l) % 714025l;
- return randomseed / (714025l / choices + 1);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// distance2() Returns the square "distance" of a tetrahedron to point p. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-REAL tetgenmesh::distance2(tetrahedron* tetptr, point p)
-{
- point p1, p2, p3, p4;
- REAL dx, dy, dz;
-
- p1 = (point) tetptr[4];
- p2 = (point) tetptr[5];
- p3 = (point) tetptr[6];
- p4 = (point) tetptr[7];
-
- dx = p[0] - 0.25 * (p1[0] + p2[0] + p3[0] + p4[0]);
- dy = p[1] - 0.25 * (p1[1] + p2[1] + p3[1] + p4[1]);
- dz = p[2] - 0.25 * (p1[2] + p2[2] + p3[2] + p4[2]);
-
- return dx * dx + dy * dy + dz * dz;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// preciselocate() Find a simplex containing a given point. //
-// //
-// This routine implements the simple Walk-through point location algorithm. //
-// Begins its search from 'searchtet', assume there is a line segment L from //
-// a vertex of 'searchtet' to the query point 'searchpoint', and simply walk //
-// towards 'searchpoint' by traversing all faces intersected by L. //
-// //
-// On completion, 'searchtet' is a tetrahedron that contains 'searchpoint'. //
-// The returned value indicates one of the following cases: //
-// - Returns ONVERTEX if the point lies on an existing vertex. 'searchtet' //
-// is a handle whose origin is the existing vertex. //
-// - Returns ONEDGE if the point lies on a mesh edge. 'searchtet' is a //
-// handle whose primary edge is the edge on which the point lies. //
-// - Returns ONFACE if the point lies strictly within a face. 'searchtet' //
-// is a handle whose primary face is the face on which the point lies. //
-// - Returns INTETRAHEDRON if the point lies strictly in a tetrahededron. //
-// 'searchtet' is a handle on the tetrahedron that contains the point. //
-// - Returns OUTSIDE if the point lies outside the mesh. 'searchtet' is a //
-// handle whose location is the face the point is to 'above' of. //
-// //
-// WARNING: This routine is designed for convex triangulations, and will not //
-// generally work after the holes and concavities have been carved. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::locateresult tetgenmesh::
-preciselocate(point searchpoint, triface* searchtet)
-{
- triface backtracetet;
- triface walkthroface;
- point forg, fdest, fapex, toppo;
- REAL ori1, ori2, ori3, ori4;
- long tetnumber;
- int side;
-
- // 'searchtet' should be a valid tetrahedron.
- if (searchtet->tet == dummytet) {
- symself(*searchtet);
- assert(searchtet->tet != dummytet);
- }
- assert(!isdead(searchtet));
-
- searchtet->ver = 0; // Keep in CCW edge ring.
- // Find a face of 'searchtet' such that the 'searchpoint' lies strictly
- // above it. Such face should always exist.
- for (searchtet->loc = 0; searchtet->loc < 4; searchtet->loc++) {
- forg = org(*searchtet);
- fdest = dest(*searchtet);
- fapex = apex(*searchtet);
- ori1 = orient3d(forg, fdest, fapex, searchpoint);
- if (ori1 < 0.0) break;
- }
- assert(searchtet->loc < 4);
-
- // Define 'tetnumber' for exit the loop when it's running endless.
- tetnumber = 0l;
- while (tetnumber <= tetrahedrons->items) {
- // Check if we are reaching the boundary of the triangulation.
- if (searchtet->tet == dummytet) {
- *searchtet = backtracetet;
- return OUTSIDE;
- }
- // Initialize the face for returning the walk-through face.
- walkthroface.tet = (tetrahedron *) NULL;
- // Adjust the edge ring, so that 'ori1 < 0.0' holds.
- searchtet->ver = 0;
- // 'toppo' remains unchange for the following orientation tests.
- toppo = oppo(*searchtet);
- // Check the three sides of 'searchtet' to find the face through which
- // we can walk next.
- for (side = 0; side < 3; side++) {
- forg = org(*searchtet);
- fdest = dest(*searchtet);
- ori2 = orient3d(forg, fdest, toppo, searchpoint);
- if (ori2 == 0.0) {
- // They are coplanar, check if 'searchpoint' lies inside, or on an
- // edge, or coindice with a vertex of face (forg, fdest, toppo).
- fapex = apex(*searchtet);
- ori3 = orient3d(fdest, fapex, toppo, searchpoint);
- if (ori3 < 0.0) {
- // Outside the face (fdest, fapex, toppo), walk through it.
- enextself(*searchtet);
- fnext(*searchtet, walkthroface);
- break;
- }
- ori4 = orient3d(fapex, forg, toppo, searchpoint);
- if (ori4 < 0.0) {
- // Outside the face (fapex, forg, toppo), walk through it.
- enext2self(*searchtet);
- fnext(*searchtet, walkthroface);
- break;
- }
- // Remember, ori1 < 0.0, which means 'searchpoint' will not
- // on edge (forg, fdest) or on vertex forg or fdest.
- assert(ori1 < 0.0);
- // The rest possible cases are:
- // (1) 'searchpoint' lies on edge (fdest, toppo);
- // (2) 'searchpoint' lies on edge (toppo, forg);
- // (3) 'searchpoint' coincident with toppo;
- // (4) 'searchpoint' lies inside face (forg, fdest, toppo).
- fnextself(*searchtet);
- if (ori3 == 0.0) {
- if (ori4 == 0.0) {
- // Case (4).
- enext2self(*searchtet);
- return ONVERTEX;
- } else {
- // Case (1).
- enextself(*searchtet);
- return ONEDGE;
- }
- }
- if (ori4 == 0.0) {
- // Case (2).
- enext2self(*searchtet);
- return ONEDGE;
- }
- // Case (4).
- return ONFACE;
- } else if (ori2 < 0.0) {
- // Outside the face (forg, fdest, toppo), walk through it.
- fnext(*searchtet, walkthroface);
- break;
- }
- // Go to check next side.
- enextself(*searchtet);
- }
- if (side >= 3) {
- // Found! Inside tetrahedron.
- return INTETRAHEDRON;
- }
- // We walk through the face 'walkthroface' and continue the searching.
- assert(walkthroface.tet != (tetrahedron *) NULL);
- // Store the face handle in 'backtracetet' before we take the real walk.
- // So we are able to restore the handle to 'searchtet' if we are
- // reaching the outer boundary.
- backtracetet = walkthroface;
- sym(walkthroface, *searchtet);
- tetnumber++;
- }
-
- // Should never be here.
- printf("Internal error in preciselocate(): Point location failed.\n");
- internalerror();
- return OUTSIDE;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// locate() Find a simplex containing a given point. //
-// //
-// This routine implements Muecke's Jump-and-walk point location algorithm. //
-// It improves the simple walk-through by "jumping" to a good starting point //
-// via random sampling. Searching begins from one of handles: the input //
-// 'searchtet', a recently encountered tetrahedron 'recenttet', or from one //
-// chosen from a random sample. The choice is made by determining which one //
-// 's barycenter is closest to the point we are searcing for. Having chosen //
-// the starting tetrahedron, the simple Walk-through algorithm is used to do //
-// the real walking. //
-// //
-// On completion, 'searchtet' is a tetrahedron that contains 'searchpoint'. //
-// The returned value indicates one of the following cases: //
-// - Returns ONVERTEX if the point lies on an existing vertex. 'searchtet' //
-// is a handle whose origin is the existing vertex. //
-// - Returns ONEDGE if the point lies on a mesh edge. 'searchtet' is a //
-// handle whose primary edge is the edge on which the point lies. //
-// - Returns ONFACE if the point lies strictly within a face. 'searchtet' //
-// is a handle whose primary face is the face on which the point lies. //
-// - Returns INTETRAHEDRON if the point lies strictly in a tetrahededron. //
-// 'searchtet' is a handle on the tetrahedron that contains the point. //
-// - Returns OUTSIDE if the point lies outside the mesh. 'searchtet' is a //
-// handle whose location is the face the point is to 'above' of. //
-// //
-// WARNING: This routine is designed for convex triangulations, and will not //
-// generally work after the holes and concavities have been carved. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::locateresult tetgenmesh::
-locate(point searchpoint, triface *searchtet)
-{
- tetrahedron *firsttet, *tetptr;
- void **sampleblock;
- long sampleblocks, samplesperblock, samplenum;
- long tetblocks, i, j;
- unsigned long alignptr;
- REAL searchdist, dist;
-
- // 'searchtet' should be a valid tetrahedron.
- if (isdead(searchtet)) {
- searchtet->tet = dummytet;
- }
- if (searchtet->tet == dummytet) {
- // This is an 'Outer Space' handle, get a hull tetrahedron.
- searchtet->loc = 0;
- symself(*searchtet);
- }
- assert(!isdead(searchtet));
-
- // Record the distance from the suggested starting tetrahedron to the
- // point we seek.
- searchdist = distance2(searchtet->tet, searchpoint);
-
- // If a recently encountered tetrahedron has been recorded and has not
- // been deallocated, test it as a good starting point.
- if (!isdead(&recenttet) && (recenttet.tet != searchtet->tet)) {
- dist = distance2(recenttet.tet, searchpoint);
- if (dist < searchdist) {
- *searchtet = recenttet;
- searchdist = dist;
- }
- }
-
- // Select "good" candidate using k random samples, taking the closest one.
- // The number of random samples taken is proportional to the cube root
- // of the number of tetrahedra in the mesh. The next bit of code assumes
- // that the number of tetrahedra increases monotonically.
- while (SAMPLEFACTOR * samples * samples * samples < tetrahedrons->items) {
- samples++;
- }
- // Find how much blocks in current tet pool.
- tetblocks = (tetrahedrons->maxitems + ELEPERBLOCK - 1) / ELEPERBLOCK;
- // Find the average samles per block. Each block at least have 1 sample.
- samplesperblock = 1 + (samples / tetblocks);
- sampleblocks = samples / samplesperblock;
- sampleblock = tetrahedrons->firstblock;
- for (i = 0; i < sampleblocks; i++) {
- alignptr = (unsigned long) (sampleblock + 1);
- firsttet = (tetrahedron *)
- (alignptr + (unsigned long) tetrahedrons->alignbytes
- - (alignptr % (unsigned long) tetrahedrons->alignbytes));
- for (j = 0; j < samplesperblock; j++) {
- if (i == tetblocks - 1) {
- // This is the last block.
- samplenum = randomnation((int)
- (tetrahedrons->maxitems - (i * ELEPERBLOCK)));
- } else {
- samplenum = randomnation(ELEPERBLOCK);
- }
- tetptr = (tetrahedron *)
- (firsttet + (samplenum * tetrahedrons->itemwords));
- if (tetptr[4] != (tetrahedron) NULL) {
- dist = distance2(tetptr, searchpoint);
- if (dist < searchdist) {
- searchtet->tet = tetptr;
- searchdist = dist;
- }
- }
- }
- sampleblock = (void **) *sampleblock;
- }
-
- // Call simple walk-through to locate the point.
- return preciselocate(searchpoint, searchtet);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// adjustlocate() Adjust the precise location of a vertex with respect to //
-// a given tetrahedron using a given relative tolerance. //
-// //
-// 'precise' is the precise location (returned from preciselocate()) of the //
-// point 'searchpoint' with respect to the tetrahedron 'searchtet'. 'epspp' //
-// is the given relative tolerance. //
-// //
-// This routine reevaluates the orientations of searchpoint with respect to //
-// the four faces of searchtet. Detects the coplanarities by additinal tests //
-// which are based on the given tolerance. If 'precise' is ONFACE or ONEDGE, //
-// we can save one or two orientation tests. //
-// //
-// On completion, 'searchtet' is a tetrahedron that contains 'searchpoint'. //
-// The returned value indicates one of the following cases: //
-// - Returns ONVERTEX if the point lies on an existing vertex. 'searchtet' //
-// is a handle whose origin is the existing vertex. //
-// - Returns ONEDGE if the point lies on a mesh edge. 'searchtet' is a //
-// handle whose primary edge is the edge on which the point lies. //
-// - Returns ONFACE if the point lies strictly within a face. 'searchtet' //
-// is a handle whose primary face is the face on which the point lies. //
-// - Returns INTETRAHEDRON if the point lies strictly in a tetrahededron. //
-// 'searchtet' is a handle on the tetrahedron that contains the point. //
-// - Returns OUTSIDE if the point lies outside the mesh. 'searchtet' is a //
-// handle whose location is the face the point is to 'above' of. //
-// //
-// WARNING: This routine detect degenerate case using relative tolerance. //
-// It is better used after locate() or preciselocate(). For general inputs, //
-// it may not able to tell the correct location. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::locateresult tetgenmesh::
-adjustlocate(point searchpoint, triface* searchtet, enum locateresult precise,
- REAL epspp)
-{
- point torg, tdest, tapex, toppo;
- REAL s1, s2, s3, s4;
-
- // For the given 'searchtet', the orientations tests are:
- // s1: (tdest, torg, tapex, searchpoint);
- // s2: (torg, tdest, toppo, searchpoint);
- // s3: (tdest, tapex, toppo, searchpoint);
- // s4: (tapex, torg, toppo, searchpoint);
- adjustedgering(*searchtet, CCW);
- torg = org(*searchtet);
- tdest = dest(*searchtet);
- tapex = apex(*searchtet);
- toppo = oppo(*searchtet);
-
- switch (precise) {
- case ONVERTEX:
- // This case we don't need do any further test.
- return ONVERTEX;
- case ONEDGE:
- // (torg, tdest);
- s1 = 0.0;
- s2 = 0.0;
- break;
- case ONFACE:
- // (tdest, torg, tapex);
- s1 = 0.0;
- s2 = orient3d(torg, tdest, toppo, searchpoint);
- break;
- default: // INTETRAHEDRON or OUTSIDE
- s1 = orient3d(tdest, torg, tapex, searchpoint);
- s2 = orient3d(torg, tdest, toppo, searchpoint);
- }
-
- if (s1 != 0.0) {
- if (iscoplanar(tdest, torg, tapex, searchpoint, s1, epspp)) {
- s1 = 0.0;
- }
- }
- if (s1 < 0.0) {
- return OUTSIDE;
- }
-
- if (s2 != 0.0) {
- if (iscoplanar(torg, tdest, toppo, searchpoint, s2, epspp)) {
- s2 = 0.0;
- }
- }
- if (s2 < 0.0) {
- fnextself(*searchtet);
- return OUTSIDE;
- }
-
- s3 = orient3d(tdest, tapex, toppo, searchpoint);
- if (s3 != 0.0) {
- if (iscoplanar(tdest, tapex, toppo, searchpoint, s3, epspp)) {
- s3 = 0.0;
- }
- }
- if (s3 < 0.0) {
- enextfnextself(*searchtet);
- return OUTSIDE;
- }
-
- s4 = orient3d(tapex, torg, toppo, searchpoint);
- if (s4 != 0.0) {
- if (iscoplanar(tapex, torg, toppo, searchpoint, s4, epspp)) {
- s4 = 0.0;
- }
- }
- if (s4 < 0.0) {
- enext2fnextself(*searchtet);
- return OUTSIDE;
- }
-
- // Determine degenerate cases.
- if (s1 == 0.0) {
- if (s2 == 0.0) {
- if (s3 == 0.0) {
- // On tdest.
- enextself(*searchtet);
- return ONVERTEX;
- }
- if (s4 == 0.0) {
- // On torg.
- return ONVERTEX;
- }
- // On edge (torg, tdest).
- return ONEDGE;
- }
- if (s3 == 0.0) {
- if (s4 == 0.0) {
- // On tapex.
- enext2self(*searchtet);
- return ONVERTEX;
- }
- // On edge (tdest, tapex).
- enextself(*searchtet);
- return ONEDGE;
- }
- if (s4 == 0.0) {
- // On edge (tapex, torg).
- enext2self(*searchtet);
- return ONEDGE;
- }
- // On face (torg, tdest, tapex).
- return ONFACE;
- }
- if (s2 == 0.0) {
- fnextself(*searchtet);
- if (s3 == 0.0) {
- if (s4 == 0.0) {
- // On toppo.
- enext2self(*searchtet);
- return ONVERTEX;
- }
- // On edge (tdest, toppo).
- enextself(*searchtet);
- return ONEDGE;
- }
- if (s4 == 0.0) {
- // On edge (toppo, torg).
- enext2self(*searchtet);
- return ONEDGE;
- }
- // On face (torg, tdest, toppo).
- return ONFACE;
- }
- if (s3 == 0.0) {
- enextfnextself(*searchtet);
- if (s4 == 0.0) {
- // On edge (tapex, toppo).
- enextself(*searchtet);
- return ONEDGE;
- }
- // On face (tdest, tapex, toppo).
- return ONFACE;
- }
- if (s4 == 0.0) {
- enext2fnextself(*searchtet);
- // On face (tapex, torg, toppo).
- return ONFACE;
- }
-
- // Inside tetrahedron.
- return INTETRAHEDRON;
-}
-
-//
-// End of point location routines
-//
-
-//
-// Begin of mesh transformation routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// categorizeface() Determine the flip type of a given face. //
-// //
-// On input, 'horiz' represents the face we want to flip (you can imagine it //
-// is parallel to the horizon). Let the tetrahedron above it be abcd, where //
-// abc is 'horiz'. //
-// //
-// If abc is a hull face, it is unflipable, and is locally Delaunay. In the //
-// following, we assume abc is an interior face, and the other tetrahedron //
-// adjoining at abc is bace. //
-// //
-// If the convex hull CH of the set {a, b, c, d, e} only has four vertices, //
-// i.e., one vertex lies inside CH, then abc is unflipable, and is locally //
-// Delaunay. If CH is the vertex set itself, we have the following cases to //
-// determine whether abc is flipable or not. //
-// //
-// If no four points of {a, b, c, d, e} are coplanar, a 2-to-3 flip can be //
-// applied to abc if the edge de crosses the triangle abc; a 3-to-2 flip can //
-// be applied to abc if ab crosses cde, and abde exists, otherwise, face abc //
-// is unflipable, i.e., the tetrahedron abde is not present. //
-// //
-// If four points of {a, b, c, d, e} are coplanar (two faces are coplanar). //
-// Assume faces abd and abe are coplanar (it is impossible be abc). If a, b, //
-// d, e form a non-convex quadrilateral, then abc is unflipable, furthermore,//
-// it is locally Delaunay. Assume they are convex quadrilateral, if abd and //
-// abe are hull faces, a 2-to-2 flip can be applied to abc; if abd and abe //
-// are interior faces, assume two tetrahedra adjoining abd and abe at the //
-// opposite sides are abdg and abef, respectively. If g = f, a 4-to-4 flip //
-// can be applied to abc, otherwise, abc is unflipable. //
-// //
-// There are other cases which can cause abc unflipable. If abc is a subface,//
-// a 2-to-3 flip is forbidden; if ab is a subsegment, flips 3-to-2, 2-to-2, //
-// and 4-to-4 are forbidden. //
-// //
-// This routine determines the suitable type of flip operation for 'horiz'. //
-// - Returns T23 if a 2-to-3 flip is applicable. 'horiz' is same as input. //
-// - Returns T32 if a 3-to-2 flip is applicable. 'horiz' is adjusted so //
-// that the primary edge of 'horiz' is the flipable edge. //
-// - Returns T22 if a 2-to-2 or 4-to-4 flip is applicable. 'horiz' is //
-// adjusted so that the primary edge of 'horiz' is the flipable edge. //
-// - Returns FORBIDDENFACE indicates although a 2-to-3 flip is applicable, //
-// but it is a subface and should not be flipped away. //
-// - Returns FORBIDDENEDGE indicates although a 3-to-2, or 2-to-2, or //
-// 4-to-4 flip is applicable, but the flipable edge is a subsegment and //
-// should not be flipped away. 'horiz' is adjusted so that the primary //
-// edge of 'horiz' is the flipable edge. //
-// - Returns UNFLIPABLE indicates it is unflipable due to the absence of //
-// a tetrahedron. 'horiz' is adjusted so that the primary edge of 'horiz'//
-// is the unflipable edge. Possibly, It is a subsegment. //
-// - Returns NONCONVEX indicates it is unflipable and is locally Delaunay. //
-// //
-// Given a face abc, with two adjoining tetrahedra abcd and bace. If abc is //
-// flipable, i.e., T23, T32, T22 or T44, its flip type can be determined by //
-// doing five orientation tests: two tests for determining that d, e lie on //
-// the different sides of abc, three tests for determining if the edge de //
-// intersects the face abc. However, if we use the neighbor information of //
-// the mesh data structure, we can reduce the five orientation tests to at //
-// most three tests, that is, the two tests for determining whether d and e //
-// lie on the different sides of abc can be saved. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::fliptype tetgenmesh::categorizeface(triface& horiz)
-{
- triface symhoriz, casing;
- face checksh, checkseg;
- face cassh1, cassh2;
- point pa, pb, pc, pd, pe, pf, pg;
- point abdoppo, bcdoppo, cadoppo;
- REAL ori1, ori2, ori3;
- int adjtet;
-
- sym(horiz, symhoriz);
- if (symhoriz.tet == dummytet) {
- // A hull face is unflipable and locally Delaunay.
- return NONCONVEX;
- }
-
- adjustedgering(horiz, CCW);
- findedge(&symhoriz, dest(horiz), org(horiz));
- pa = org(horiz);
- pb = dest(horiz);
- pc = apex(horiz);
- pd = oppo(horiz);
- pe = oppo(symhoriz);
-
- // Find the number of adjacent tetrahedra of abc, which have d, e, and one
- // of corners of abc as their corners. This number can be 0, 1 and 2.
- abdoppo = bcdoppo = cadoppo = (point) NULL;
- adjtet = 0;
- fnext(horiz, casing); // at edge 'ab'.
- symself(casing);
- if (casing.tet != dummytet) {
- abdoppo = oppo(casing);
- if (abdoppo == pe) adjtet++;
- }
- enextfnext(horiz, casing); // at edge 'bc'.
- symself(casing);
- if (casing.tet != dummytet) {
- bcdoppo = oppo(casing);
- if (bcdoppo == pe) adjtet++;
- }
- enext2fnext(horiz, casing); // at edge 'ca'.
- symself(casing);
- if (casing.tet != dummytet) {
- cadoppo = oppo(casing);
- if (cadoppo == pe) adjtet++;
- }
-
- if (adjtet == 0) {
- // No adjacent tetrahedron. Types T23, T22 and T44 are possible.
- ori1 = orient3d(pa, pb, pd, pe);
- if (checksubfaces && ori1 != 0.0) {
- // Are abd and abe subfaces and belong to the same facet?
- fnext(horiz, casing);
- tspivot(casing, cassh1);
- fnext(symhoriz, casing);
- tspivot(casing, cassh2);
- if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
- // Two adjoining boundary faces. If the common edge of them is not
- // a subsegment, they belong to the same facet.
- findedge(&cassh1, pa, pb);
- sspivot(cassh1, checkseg);
- if (checkseg.sh == dummysh) {
- // The four points are forced to be coplanar.
- ori1 = 0.0;
- }
- }
- if (ori1 != 0.0) {
- // Check if abd and bae are approximately coplanar.
- if (iscoplanar(pa, pb, pd, pe, ori1, b->epsilon)) ori1 = 0.0;
- }
- }
- if (ori1 < 0.0) {
- // e lies above abd, unflipable, tet abde is not present.
-#ifdef SELF_CHECK
- if (!nonconvex) {
- // abd and abe should not be hull faces, check it.
- fnext(horiz, casing);
- symself(casing);
- assert(casing.tet != dummytet);
- fnext(symhoriz, casing);
- symself(casing);
- assert(casing.tet != dummytet);
- }
-#endif
- if (checksubfaces) {
- // The nonconvexbility may be casued by existing an subsegment.
- tsspivot(&horiz, &checkseg);
- if (checkseg.sh != dummysh) {
- return FORBIDDENEDGE;
- }
- }
- return UNFLIPABLE;
- }
- ori2 = orient3d(pb, pc, pd, pe);
- if (checksubfaces && ori2 != 0.0) {
- // Are bcd and cbe subfaces and belong to the same facet?
- enextfnext(horiz, casing);
- tspivot(casing, cassh1);
- enext2fnext(symhoriz, casing);
- tspivot(casing, cassh2);
- if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
- // Two adjoining boundary faces. If the common edge of them is not
- // a subsegment, they belong to the same facet.
- findedge(&cassh1, pb, pc);
- sspivot(cassh1, checkseg);
- if (checkseg.sh == dummysh) {
- // The four points are forced to be coplanar.
- ori2 = 0.0;
- }
- }
- if (ori2 != 0.0) {
- // Check if bcd and cbe are approximately coplanar.
- if (iscoplanar(pb, pc, pd, pe, ori2, b->epsilon)) ori2 = 0.0;
- }
- }
- if (ori2 < 0.0) {
- // e lies above bcd, unflipable, tet bcde is not present.
-#ifdef SELF_CHECK
- if (!nonconvex) {
- // bcd and cbe should not be hull faces, check it.
- enextfnext(horiz, casing);
- symself(casing);
- assert(casing.tet != dummytet);
- enext2fnext(symhoriz, casing);
- symself(casing);
- assert(casing.tet != dummytet);
- }
-#endif
- enextself(horiz);
- if (checksubfaces) {
- // The nonconvexbility may be casued by existing an subsegment.
- tsspivot(&horiz, &checkseg);
- if (checkseg.sh != dummysh) {
- return FORBIDDENEDGE;
- }
- }
- return UNFLIPABLE;
- }
- ori3 = orient3d(pc, pa, pd, pe);
- if (checksubfaces && ori3 != 0.0) {
- // Are cad and ace subfaces and belong to the same facet?
- enext2fnext(horiz, casing);
- tspivot(casing, cassh1);
- enextfnext(symhoriz, casing);
- tspivot(casing, cassh2);
- if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
- // Two adjoining boundary faces. If the common edge of them is not
- // a subsegment, they belong to the same facet.
- findedge(&cassh1, pc, pa);
- sspivot(cassh1, checkseg);
- if (checkseg.sh == dummysh) {
- // The four points are forced to be coplanar.
- ori3 = 0.0;
- }
- }
- if (ori3 != 0.0) {
- // Check if cad and ace are approximately coplanar.
- if (iscoplanar(pc, pa, pd, pe, ori3, b->epsilon)) ori3 = 0.0;
- }
- }
- if (ori3 < 0.0) {
- // e lies above cad, unflipable, tet cade is not present.
-#ifdef SELF_CHECK
- if (!nonconvex) {
- // cad and ace should not be hull faces, check it.
- enext2fnext(horiz, casing);
- symself(casing);
- assert(casing.tet != dummytet);
- enextfnext(symhoriz, casing);
- symself(casing);
- assert(casing.tet != dummytet);
- }
-#endif
- enext2self(horiz);
- if (checksubfaces) {
- // The nonconvexbility may be casued by existing an subsegment.
- tsspivot(&horiz, &checkseg);
- if (checkseg.sh != dummysh) {
- return FORBIDDENEDGE;
- }
- }
- return UNFLIPABLE;
- }
- if (ori1 == 0.0) {
- // e is coplanar with abd.
- if (ori2 * ori3 == 0.0) {
- // only one zero is possible.
- // assert(!(ori2 == 0.0 && ori3 == 0.0));
- // Three points (d, e, and a or b) are collinear, abc is unflipable
- // and locally Delaunay.
- return NONCONVEX;
- }
- } else if (ori2 == 0.0) {
- // e is coplanar with bcd.
- if (ori1 * ori3 == 0.0) {
- // only one zero is possible.
- // assert(!(ori1 == 0.0 && ori3 == 0.0));
- // Three points (d, e, and b or c) are collinear, abc is unflipable
- // and locally Delaunay.
- return NONCONVEX;
- }
- // Adjust 'horiz' and 'symhoriz' be the edge bc.
- enextself(horiz);
- enext2self(symhoriz);
- } else if (ori3 == 0.0) {
- // e is coplanar with cad.
- if (ori1 * ori2 == 0.0) {
- // only one zero is possible.
- // assert(!(ori1 == 0.0 && ori2 == 0.0));
- // Three points (d, e, and c or a) are collinear, abc is unflipable
- // and locally Delaunay.
- return NONCONVEX;
- }
- // Adjust 'horiz' and 'symhoriz' be the edge ca.
- enext2self(horiz);
- enextself(symhoriz);
- } else {
- // e lies below all three faces, flipable.
- if (checksubfaces) {
- tspivot(horiz, checksh);
- if (checksh.sh != dummysh) {
- // To flip a subface is forbidden.
- return FORBIDDENFACE;
- }
- }
- return T23;
- }
- // Four points are coplanar, T22 or T44 is possible.
- if (checksubfaces) {
- tsspivot(&horiz, &checkseg);
- if (checkseg.sh != dummysh) {
- // To flip a subsegment is forbidden.
- return FORBIDDENEDGE;
- }
- tspivot(horiz, checksh);
- if (checksh.sh != dummysh) {
- // To flip a subface is forbidden.
- return FORBIDDENFACE;
- }
- }
- // Assume the four coplanar points are a, b, d, e, abd and abe are two
- // coplanar faces. If both abd and abe are hull faces, flipable(T22).
- // If they are interior faces, get the opposite tetrahedra abdf and
- // abeg, if f = g, flipable (T44). Otherwise, unflipable.
- pf = pg = (point) NULL;
- fnext(horiz, casing);
- symself(casing);
- if (casing.tet != dummytet) {
- pf = oppo(casing);
- }
- fnext(symhoriz, casing);
- symself(casing);
- if (casing.tet != dummytet) {
- pg = oppo(casing);
- }
- if (pf == (point) NULL && pg == (point) NULL) {
- // abd and abe are hull faces, flipable.
- return T22;
- } else if (pf == pg) {
- // abd and abe are interior faces, flipable.
- return T44;
- } else {
- // ab has more than four faces around it, unflipable.
- return UNFLIPABLE;
- }
- } else if (adjtet == 1) {
- // One of its three edges is locally non-convex. Type T32 is possible.
- // Adjust current configuration so that edge ab is non-convex.
- if (bcdoppo == pe) {
- // Edge bc is non-convex. Adjust 'horiz' and 'symhoriz' be edge bc.
- enextself(horiz);
- enext2self(symhoriz);
- pa = org(horiz);
- pb = dest(horiz);
- pc = apex(horiz);
- } else if (cadoppo == pe) {
- // Edge ca is non-convex. Adjust 'horiz' and 'symhoriz' be edge ca.
- enext2self(horiz);
- enextself(symhoriz);
- pa = org(horiz);
- pb = dest(horiz);
- pc = apex(horiz);
- } else {
- // Edge ab is non-convex.
- assert(abdoppo == pe);
- } // Now ab is the non-convex edge.
- // In order to be flipable, ab should cross face cde. Check it.
- ori1 = orient3d(pc, pd, pe, pa);
- if (checksubfaces && ori1 != 0.0) {
- // Are cad and ace subfaces and belong to the same facet?
- enext2fnext(horiz, casing);
- tspivot(casing, cassh1);
- enextfnext(symhoriz, casing);
- tspivot(casing, cassh2);
- if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
- // Two adjoining boundary faces. If the common edge of them is not
- // a subsegment, they belong to the same facet.
- findedge(&cassh1, pc, pa);
- sspivot(cassh1, checkseg);
- if (checkseg.sh == dummysh) {
- // The four points are forced to be coplanar.
- ori1 = 0.0;
- }
- }
- }
- if (ori1 <= 0.0) {
- // a lies above cde, unflipable, and abc is locally Delaunay.
- return NONCONVEX;
- }
- ori2 = orient3d(pd, pc, pe, pb);
- if (checksubfaces && ori2 != 0.0) {
- // Are bcd and cbe subfaces and belong to the same facet?
- enextfnext(horiz, casing);
- tspivot(casing, cassh1);
- enext2fnext(symhoriz, casing);
- tspivot(casing, cassh2);
- if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
- // Two adjoining boundary faces. If the common edge of them is not
- // a subsegment, they belong to the same facet.
- findedge(&cassh1, pb, pc);
- sspivot(cassh1, checkseg);
- if (checkseg.sh == dummysh) {
- // The four points are forced to be coplanar.
- ori2 = 0.0;
- }
- }
- }
- if (ori2 <= 0.0) {
- // b lies above dce, unflipable, and abc is locally Delaunay.
- return NONCONVEX;
- }
- // Edge ab crosses face cde properly.
- if (checksubfaces) {
- // If abc is subface, then ab must be a subsegment (because abde is
- // a tetrahedron and ab crosses cde properly).
- tsspivot(&horiz, &checkseg);
- if (checkseg.sh != dummysh) {
- // To flip a subsegment is forbidden.
- return FORBIDDENEDGE;
- }
- // Both abd and bae should not be subfaces (because they're not
- // coplanar and ab is not a subsegment). However, they may be
- // subfaces and belong to a facet (created during facet recovery),
- // that is, abde is an invalid tetrahedron. Find this case out.
- fnext(horiz, casing);
- tspivot(casing, cassh1);
- fnext(symhoriz, casing);
- tspivot(casing, cassh2);
- if (cassh1.sh != dummysh || cassh2.sh != dummysh) {
- // Unfortunately, they're subfaces. Corrections need be done here.
- printf("Warning: A tetrahedron spans two subfaces of a facet.\n");
- // Temporarily, let it be there.
- return NONCONVEX;
- }
- }
- return T32;
- } else {
- assert(adjtet == 2);
- // The convex hull of {a, b, c, d, e} has only four vertices, abc is
- // unflipable, furthermore, it is locally Delaunay.
- return NONCONVEX;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// enqueueflipface(), enqueueflipedge() Add a face or an edge to the end //
-// of a queue. //
-// //
-// This face or edge may be non-Delaunay and will be checked. Corresponding //
-// flip operation will be applied on it if it is non-Delaunay. The vertices //
-// of the face or edge are stored seperatly used to ensure the face or edge //
-// is still the same one when we save it. Sometimes, other flipping will //
-// cause this face or edge be changed or dead. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::enqueueflipface(triface& checkface, queue* flipqueue)
-{
- badface *queface;
-
- queface = (badface *) flipqueue->push((void *) NULL);
- queface->tt = checkface;
- queface->forg = org(checkface);
- queface->fdest = dest(checkface);
- queface->fapex = apex(checkface);
-}
-
-void tetgenmesh::enqueueflipedge(face& checkedge, queue* flipqueue)
-{
- badface *queface;
-
- queface = (badface *) flipqueue->push((void *) NULL);
- queface->ss = checkedge;
- queface->forg = sorg(checkedge);
- queface->fdest = sdest(checkedge);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// flip23() Perform a 2-to-3 flip. //
-// //
-// On input, 'flipface' represents the face will be flipped. Let it is abc, //
-// the two tetrahedra sharing abc are abcd, bace. abc is not a subface. //
-// //
-// A 2-to-3 flip is to change two tetrahedra abcd, bace to three tetrahedra //
-// edab, edbc, and edca. As a result, face abc has been removed and three //
-// new faces eda, edb and edc have been created. //
-// //
-// On completion, 'flipface' returns edab. If 'flipqueue' is not NULL, all //
-// possibly non-Delaunay faces are added into it. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::flip23(triface* flipface, queue* flipqueue)
-{
- triface abcd, bace; // Old configuration.
- triface oldabd, oldbcd, oldcad;
- triface abdcasing, bcdcasing, cadcasing;
- face abdsh, bcdsh, cadsh;
- triface oldbae, oldcbe, oldace;
- triface baecasing, cbecasing, acecasing;
- face baesh, cbesh, acesh;
- triface edab, edbc, edca; // New configuration.
- point pa, pb, pc, pd, pe;
- REAL attrib, volume;
- int i;
-
- abcd = *flipface;
- adjustedgering(abcd, CCW); // abcd represents edge ab.
- sym(abcd, bace);
- findedge(&bace, dest(abcd), org(abcd)); // bace represents edge ba.
- pa = org(abcd);
- pb = dest(abcd);
- pc = apex(abcd);
- pd = oppo(abcd);
- pe = oppo(bace);
-
- if (b->verbose > 2) {
- printf(" Do T23 on face (%d, %d, %d, %d).\n", pointmark(pa),
- pointmark(pb), pointmark(pc), pointmark(pd));
- }
- flip23s++;
-
-#ifdef SELF_CHECK
- // Edge de must cross face abc properly.
- assert(orient3d(pa, pb, pd, pe) >= 0.0);
- assert(orient3d(pb, pc, pd, pe) >= 0.0);
- assert(orient3d(pc, pa, pd, pe) >= 0.0);
-#endif
-
- // Storing the old configuration outside the convex hull.
- fnext(abcd, oldabd);
- enextfnext(abcd, oldbcd);
- enext2fnext(abcd, oldcad);
- fnext(bace, oldbae);
- enext2fnext(bace, oldcbe);
- enextfnext(bace, oldace);
- sym(oldabd, abdcasing);
- sym(oldbcd, bcdcasing);
- sym(oldcad, cadcasing);
- sym(oldbae, baecasing);
- sym(oldcbe, cbecasing);
- sym(oldace, acecasing);
- if (checksubfaces) {
- tspivot(oldabd, abdsh);
- tspivot(oldbcd, bcdsh);
- tspivot(oldcad, cadsh);
- tspivot(oldbae, baesh);
- tspivot(oldcbe, cbesh);
- tspivot(oldace, acesh);
- }
-
- // Creating the new configuration inside the convex hull.
- edab.tet = abcd.tet; // Update abcd to be edab.
- setorg (edab, pe);
- setdest(edab, pd);
- setapex(edab, pa);
- setoppo(edab, pb);
- edbc.tet = bace.tet; // Update bace to be edbc.
- setorg (edbc, pe);
- setdest(edbc, pd);
- setapex(edbc, pb);
- setoppo(edbc, pc);
- maketetrahedron(&edca); // Create edca.
- setorg (edca, pe);
- setdest(edca, pd);
- setapex(edca, pc);
- setoppo(edca, pa);
- // Set the element attributes of the new tetrahedron 'edca'.
- for (i = 0; i < in->numberoftetrahedronattributes; i++) {
- attrib = elemattribute(abcd.tet, i);
- setelemattribute(edca.tet, i, attrib);
- }
- // Set the volume constraint of the new tetrahedron 'edca' if the -ra
- // switches are not used together. In -ra case, the various volume
- // constraints can be spreaded very far.
- if (b->varvolume && !b->refine) {
- volume = volumebound(abcd.tet);
- setvolumebound(edca.tet, volume);
- }
-
- // Clear old bonds in edab(was abcd) and edbc(was bace).
- for (i = 0; i < 4; i ++) {
- edab.loc = i;
- dissolve(edab);
- edbc.loc = i;
- dissolve(edbc);
- }
- // Bond the faces inside the convex hull.
- edab.loc = 0;
- edca.loc = 1;
- bond(edab, edca);
- edab.loc = 1;
- edbc.loc = 0;
- bond(edab, edbc);
- edbc.loc = 1;
- edca.loc = 0;
- bond(edbc, edca);
- // Bond the faces on the convex hull.
- edab.loc = 2;
- bond(edab, abdcasing);
- edab.loc = 3;
- bond(edab, baecasing);
- edbc.loc = 2;
- bond(edbc, bcdcasing);
- edbc.loc = 3;
- bond(edbc, cbecasing);
- edca.loc = 2;
- bond(edca, cadcasing);
- edca.loc = 3;
- bond(edca, acecasing);
- // There may exist subfaces that need to be bonded to new configuarton.
- if (checksubfaces) {
- // Clear old flags in edab(was abcd) and edbc(was bace).
- for (i = 0; i < 4; i ++) {
- edab.loc = i;
- tsdissolve(edab);
- edbc.loc = i;
- tsdissolve(edbc);
- }
- if (abdsh.sh != dummysh) {
- edab.loc = 2;
- tsbond(edab, abdsh);
- }
- if (baesh.sh != dummysh) {
- edab.loc = 3;
- tsbond(edab, baesh);
- }
- if (bcdsh.sh != dummysh) {
- edbc.loc = 2;
- tsbond(edbc, bcdsh);
- }
- if (cbesh.sh != dummysh) {
- edbc.loc = 3;
- tsbond(edbc, cbesh);
- }
- if (cadsh.sh != dummysh) {
- edca.loc = 2;
- tsbond(edca, cadsh);
- }
- if (acesh.sh != dummysh) {
- edca.loc = 3;
- tsbond(edca, acesh);
- }
- }
-
- edab.loc = 0;
- edbc.loc = 0;
- edca.loc = 0;
- if (b->verbose > 3) {
- printf(" Updating edab ");
- printtet(&edab);
- printf(" Updating edbc ");
- printtet(&edbc);
- printf(" Creating edca ");
- printtet(&edca);
- }
-
- if (flipqueue != (queue *) NULL) {
- enextfnext(edab, abdcasing);
- enqueueflipface(abdcasing, flipqueue);
- enext2fnext(edab, baecasing);
- enqueueflipface(baecasing, flipqueue);
- enextfnext(edbc, bcdcasing);
- enqueueflipface(bcdcasing, flipqueue);
- enext2fnext(edbc, cbecasing);
- enqueueflipface(cbecasing, flipqueue);
- enextfnext(edca, cadcasing);
- enqueueflipface(cadcasing, flipqueue);
- enext2fnext(edca, acecasing);
- enqueueflipface(acecasing, flipqueue);
- }
-
- // Save a live handle in 'recenttet'.
- recenttet = edbc;
- // Set the return handle be edab.
- *flipface = edab;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// flip32() Perform a 3-to-2 flip. //
-// //
-// On input, 'flipface' represents the face will be flipped. Let it is eda, //
-// where edge ed is locally non-convex. Three tetrahedra sharing ed are edab,//
-// edbc, and edca. ed is not a subsegment. //
-// //
-// A 3-to-2 flip is to change the three tetrahedra edab, edbc, and edca into //
-// another two tetrahedra abcd and bace. As a result, the edge ed has been //
-// removed and the face abc has been created. //
-// //
-// On completion, 'flipface' returns abcd. If 'flipqueue' is not NULL, all //
-// possibly non-Delaunay faces are added into it. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::flip32(triface* flipface, queue* flipqueue)
-{
- triface edab, edbc, edca; // Old configuration.
- triface oldabd, oldbcd, oldcad;
- triface abdcasing, bcdcasing, cadcasing;
- face abdsh, bcdsh, cadsh;
- triface oldbae, oldcbe, oldace;
- triface baecasing, cbecasing, acecasing;
- face baesh, cbesh, acesh;
- triface abcd, bace; // New configuration.
- point pa, pb, pc, pd, pe;
- int i;
-
- edab = *flipface;
- adjustedgering(edab, CCW);
- fnext(edab, edbc);
- symself(edbc);
- findedge(&edbc, org(edab), dest(edab));
- fnext(edbc, edca);
- symself(edca);
- findedge(&edca, org(edab), dest(edab));
- pa = apex(edab);
- pb = oppo(edab);
- pc = oppo(edbc);
- pd = dest(edab);
- pe = org(edab);
-
- if (b->verbose > 2) {
- printf(" Do T32 on face (%d, %d, %d, %d).\n",
- pointmark(pe), pointmark(pd), pointmark(pa), pointmark(pb));
- }
- flip32s++;
-
-#ifdef SELF_CHECK
- // Edge de must cross face abc properly.
- assert(orient3d(pa, pb, pc, pd) <= 0.0);
- assert(orient3d(pb, pa, pc, pe) <= 0.0);
-#endif
-
- // Storing the old configuration outside the convex hull.
- enextfnext(edab, oldabd);
- enext2fnext(edab, oldbae);
- enextfnext(edbc, oldbcd);
- enext2fnext(edbc, oldcbe);
- enextfnext(edca, oldcad);
- enext2fnext(edca, oldace);
- sym(oldabd, abdcasing);
- sym(oldbcd, bcdcasing);
- sym(oldcad, cadcasing);
- sym(oldbae, baecasing);
- sym(oldcbe, cbecasing);
- sym(oldace, acecasing);
- if (checksubfaces) {
- tspivot(oldabd, abdsh);
- tspivot(oldbcd, bcdsh);
- tspivot(oldcad, cadsh);
- tspivot(oldbae, baesh);
- tspivot(oldcbe, cbesh);
- tspivot(oldace, acesh);
- }
-
- // Creating the new configuration inside the convex hull.
- abcd.tet = edab.tet; // Update edab to be abcd.
- setorg (abcd, pa);
- setdest(abcd, pb);
- setapex(abcd, pc);
- setoppo(abcd, pd);
- bace.tet = edbc.tet; // Update edbc to be bace.
- setorg (bace, pb);
- setdest(bace, pa);
- setapex(bace, pc);
- setoppo(bace, pe);
- // Dealloc a redundant tetrahedron (edca).
- tetrahedrondealloc(edca.tet);
-
- // Clear the old bonds in abcd (was edab) and bace (was edbc).
- for (i = 0; i < 4; i ++) {
- abcd.loc = i;
- dissolve(abcd);
- bace.loc = i;
- dissolve(bace);
- }
- // Bond the inside face of the convex hull.
- abcd.loc = 0;
- bace.loc = 0;
- bond(abcd, bace);
- // Bond the outside faces of the convex hull.
- abcd.loc = 1;
- bond(abcd, abdcasing);
- abcd.loc = 2;
- bond(abcd, bcdcasing);
- abcd.loc = 3;
- bond(abcd, cadcasing);
- bace.loc = 1;
- bond(bace, baecasing);
- bace.loc = 3;
- bond(bace, cbecasing);
- bace.loc = 2;
- bond(bace, acecasing);
- if (checksubfaces) {
- // Clear old bonds in abcd(was edab) and bace(was edbc).
- for (i = 0; i < 4; i ++) {
- abcd.loc = i;
- tsdissolve(abcd);
- bace.loc = i;
- tsdissolve(bace);
- }
- if (abdsh.sh != dummysh) {
- abcd.loc = 1;
- tsbond(abcd, abdsh);
- }
- if (baesh.sh != dummysh) {
- bace.loc = 1;
- tsbond(bace, baesh);
- }
- if (bcdsh.sh != dummysh) {
- abcd.loc = 2;
- tsbond(abcd, bcdsh);
- }
- if (cbesh.sh != dummysh) {
- bace.loc = 3;
- tsbond(bace, cbesh);
- }
- if (cadsh.sh != dummysh) {
- abcd.loc = 3;
- tsbond(abcd, cadsh);
- }
- if (acesh.sh != dummysh) {
- bace.loc = 2;
- tsbond(bace, acesh);
- }
- }
-
- abcd.loc = 0;
- bace.loc = 0;
- if (b->verbose > 3) {
- printf(" Updating abcd ");
- printtet(&abcd);
- printf(" Updating bace ");
- printtet(&bace);
- printf(" Deleting edca ");
- printtet(&edca);
- }
-
- if (flipqueue != (queue *) NULL) {
- fnext(abcd, abdcasing);
- enqueueflipface(abdcasing, flipqueue);
- fnext(bace, baecasing);
- enqueueflipface(baecasing, flipqueue);
- enextfnext(abcd, bcdcasing);
- enqueueflipface(bcdcasing, flipqueue);
- enextfnext(bace, cbecasing);
- enqueueflipface(cbecasing, flipqueue);
- enext2fnext(abcd, cadcasing);
- enqueueflipface(cadcasing, flipqueue);
- enext2fnext(bace, acecasing);
- enqueueflipface(acecasing, flipqueue);
- }
-
- // Save a live handle in 'recenttet'.
- recenttet = abcd;
- // Set the return handle be abcd.
- *flipface = abcd;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// flip22() Perform a 2-to-2 (or 4-to-4) flip. //
-// //
-// On input, 'flipface' represents the face will be flipped. Let it is abe, //
-// ab is the flipable edge, the two tetrahedra sharing abe are abce and bade,//
-// hence a, b, c and d are coplanar. If abc, bad are interior faces, the two //
-// tetrahedra opposite to e are bacf and abdf. ab is not a subsegment. //
-// //
-// A 2-to-2 flip is to change two tetrahedra abce and bade into another two //
-// tetrahedra dcae and cdbe. If bacf and abdf exist, they're changed to cdaf //
-// and dcbf, thus a 4-to-4 flip. As a result, two or four tetrahedra have //
-// rotated counterclockwise (using right-hand rule with thumb points to e): //
-// abce->dcae, bade->cdbe, and bacf->cdaf, abdf->dcbf. //
-// //
-// If abc and bad are subfaces, a 2-to-2 flip is performed simultaneously by //
-// calling routine flip22sub(), hence abc->dca, bad->cdb. The edge rings of //
-// the flipped subfaces dca and cdb have the same orientation as abc and bad.//
-// Hence, they have the same orientation as other subfaces of the facet with //
-// respect to the lift point of this facet. //
-// //
-// On completion, 'flipface' holds edge dc of tetrahedron dcae. 'flipqueue' //
-// contains all possibly non-Delaunay faces if it is not NULL. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::flip22(triface* flipface, queue* flipqueue)
-{
- triface abce, bade;
- triface oldbce, oldcae, oldade, olddbe;
- triface bcecasing, caecasing, adecasing, dbecasing;
- face bcesh, caesh, adesh, dbesh;
- triface bacf, abdf;
- triface oldacf, oldcbf, oldbdf, olddaf;
- triface acfcasing, cbfcasing, bdfcasing, dafcasing;
- face acfsh, cbfsh, bdfsh, dafsh;
- face abc, bad;
- point pa, pb, pc, pd, pe, pf;
- int mirrorflag;
-
- adjustedgering(*flipface, CCW); // 'flipface' is bae.
- fnext(*flipface, abce);
- esymself(abce);
- adjustedgering(*flipface, CW); // 'flipface' is abe.
- fnext(*flipface, bade);
- assert(bade.tet != dummytet);
- esymself(bade);
- pa = org(abce);
- pb = dest(abce);
- pc = apex(abce);
- pd = apex(bade);
- pe = oppo(bade);
- assert(oppo(abce) == pe);
- sym(abce, bacf);
- mirrorflag = bacf.tet != dummytet;
- if (mirrorflag) {
- findedge(&bacf, pb, pa);
- sym(bade, abdf);
- assert(abdf.tet != dummytet);
- findedge(&abdf, pa, pb);
- pf = oppo(bacf);
- assert(oppo(abdf) == pf);
- }
-
- if (b->verbose > 2) {
- printf(" Do %s on edge (%d, %d).\n", mirrorflag ? "T44" : "T22",
- pointmark(pa), pointmark(pb));
- }
- mirrorflag ? flip44s++ : flip22s++;
-
-#ifdef SELF_CHECK
- // The quadrilateral formed by a, b, c, and d must be convex.
- assert(orient3d(pc, pd, pe, pa) <= 0.0);
- assert(orient3d(pd, pc, pe, pb) <= 0.0);
-#endif
-
- // Save the old configuration at the convex hull.
- enextfnext(abce, oldbce);
- enext2fnext(abce, oldcae);
- enextfnext(bade, oldade);
- enext2fnext(bade, olddbe);
- sym(oldbce, bcecasing);
- sym(oldcae, caecasing);
- sym(oldade, adecasing);
- sym(olddbe, dbecasing);
- if (checksubfaces) {
- tspivot(oldbce, bcesh);
- tspivot(oldcae, caesh);
- tspivot(oldade, adesh);
- tspivot(olddbe, dbesh);
- tspivot(abce, abc);
- tspivot(bade, bad);
- }
- if (mirrorflag) {
- enextfnext(bacf, oldacf);
- enext2fnext(bacf, oldcbf);
- enextfnext(abdf, oldbdf);
- enext2fnext(abdf, olddaf);
- sym(oldacf, acfcasing);
- sym(oldcbf, cbfcasing);
- sym(oldbdf, bdfcasing);
- sym(olddaf, dafcasing);
- if (checksubfaces) {
- tspivot(oldacf, acfsh);
- tspivot(oldcbf, cbfsh);
- tspivot(oldbdf, bdfsh);
- tspivot(olddaf, dafsh);
- }
- }
-
- // Rotate abce, bade one-quarter turn counterclockwise.
- bond(oldbce, caecasing);
- bond(oldcae, adecasing);
- bond(oldade, dbecasing);
- bond(olddbe, bcecasing);
- if (checksubfaces) {
- // Check for subfaces and rebond them to the rotated tets.
- if (caesh.sh == dummysh) {
- tsdissolve(oldbce);
- } else {
- tsbond(oldbce, caesh);
- }
- if (adesh.sh == dummysh) {
- tsdissolve(oldcae);
- } else {
- tsbond(oldcae, adesh);
- }
- if (dbesh.sh == dummysh) {
- tsdissolve(oldade);
- } else {
- tsbond(oldade, dbesh);
- }
- if (bcesh.sh == dummysh) {
- tsdissolve(olddbe);
- } else {
- tsbond(olddbe, bcesh);
- }
- }
- if (mirrorflag) {
- // Rotate bacf, abdf one-quarter turn counterclockwise.
- bond(oldcbf, acfcasing);
- bond(oldacf, dafcasing);
- bond(olddaf, bdfcasing);
- bond(oldbdf, cbfcasing);
- if (checksubfaces) {
- // Check for subfaces and rebond them to the rotated tets.
- if (acfsh.sh == dummysh) {
- tsdissolve(oldcbf);
- } else {
- tsbond(oldcbf, acfsh);
- }
- if (dafsh.sh == dummysh) {
- tsdissolve(oldacf);
- } else {
- tsbond(oldacf, dafsh);
- }
- if (bdfsh.sh == dummysh) {
- tsdissolve(olddaf);
- } else {
- tsbond(olddaf, bdfsh);
- }
- if (cbfsh.sh == dummysh) {
- tsdissolve(oldbdf);
- } else {
- tsbond(oldbdf, cbfsh);
- }
- }
- }
-
- // New vertex assignments for the rotated tetrahedra.
- setorg(abce, pd); // Update abce to dcae
- setdest(abce, pc);
- setapex(abce, pa);
- setorg(bade, pc); // Update bade to cdbe
- setdest(bade, pd);
- setapex(bade, pb);
- if (mirrorflag) {
- setorg(bacf, pc); // Update bacf to cdaf
- setdest(bacf, pd);
- setapex(bacf, pa);
- setorg(abdf, pd); // Update abdf to dcbf
- setdest(abdf, pc);
- setapex(abdf, pb);
- }
-
- // Are there subfaces need to be flipped?
- if (checksubfaces && abc.sh != dummysh) {
- assert(bad.sh != dummysh);
- // Adjust the edge be ab, so the rotation of subfaces is according with
- // the rotation of tetrahedra.
- findedge(&abc, pa, pb);
- // Flip an edge of two subfaces, ignore non-Delaunay edges.
- flip22sub(&abc, NULL);
- }
-
- if (b->verbose > 3) {
- printf(" Updating abce ");
- printtet(&abce);
- printf(" Updating bade ");
- printtet(&bade);
- if (mirrorflag) {
- printf(" Updating bacf ");
- printtet(&bacf);
- printf(" Updating abdf ");
- printtet(&abdf);
- }
- }
-
- if (flipqueue != (queue *) NULL) {
- enextfnext(abce, bcecasing);
- enqueueflipface(bcecasing, flipqueue);
- enext2fnext(abce, caecasing);
- enqueueflipface(caecasing, flipqueue);
- enextfnext(bade, adecasing);
- enqueueflipface(adecasing, flipqueue);
- enext2fnext(bade, dbecasing);
- enqueueflipface(dbecasing, flipqueue);
- if (mirrorflag) {
- enextfnext(bacf, acfcasing);
- enqueueflipface(acfcasing, flipqueue);
- enext2fnext(bacf, cbfcasing);
- enqueueflipface(cbfcasing, flipqueue);
- enextfnext(abdf, bdfcasing);
- enqueueflipface(bdfcasing, flipqueue);
- enext2fnext(abdf, dafcasing);
- enqueueflipface(dafcasing, flipqueue);
- }
- // The two new faces dcae (abce), cdbe (bade) may still not be locally
- // Delaunay, and may need be flipped (flip23). On the other hand, in
- // conforming Delaunay algorithm, two new subfaces dca (abc), and cdb
- // (bad) may be non-conforming Delaunay, they need be queued if they
- // are locally Delaunay but non-conforming Delaunay.
- enqueueflipface(abce, flipqueue);
- enqueueflipface(bade, flipqueue);
- }
-
- // Save a live handle in 'recenttet'.
- recenttet = abce;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// flip22sub() Perform a 2-to-2 flip on a subface edge. //
-// //
-// The flip edge is given by subface 'flipedge'. Let it is abc, where ab is //
-// the flipping edge. The other subface is bad, where a, b, c, d form a //
-// convex quadrilateral. ab is not a subsegment. //
-// //
-// A 2-to-2 subface flip is to change two subfaces abc and bad to another //
-// two subfaces dca and cdb. Hence, edge ab has been removed and dc becomes //
-// an edge. If a point e is above abc, this flip is equal to rotate abc and //
-// bad counterclockwise using right-hand rule with thumb points to e. It is //
-// important to know that the edge rings of the flipped subfaces dca and cdb //
-// are keeping the same orientation as their original subfaces. So they have //
-// the same orientation with respect to the lift point of this facet. //
-// //
-// During rotating, the face rings of the four edges bc, ca, ad, and de need //
-// be re-connected. If the edge is not a subsegment, then its face ring has //
-// only two faces, a sbond() will bond them together. If it is a subsegment, //
-// one should use sbond1() twice to bond two different handles to the rotat- //
-// ing subface, one is predecssor (-casin), another is successor (-casout). //
-// //
-// If 'flipqueue' is not NULL, it returns four edges bc, ca, ad, de, which //
-// may be non-Delaunay. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::flip22sub(face* flipedge, queue* flipqueue)
-{
- face abc, bad;
- face oldbc, oldca, oldad, olddb;
- face bccasin, bccasout, cacasin, cacasout;
- face adcasin, adcasout, dbcasin, dbcasout;
- face bc, ca, ad, db;
- face spinsh;
- point pa, pb, pc, pd;
-
- abc = *flipedge;
- spivot(abc, bad);
- if (sorg(bad) != sdest(abc)) {
- sesymself(bad);
- }
- pa = sorg(abc);
- pb = sdest(abc);
- pc = sapex(abc);
- pd = sapex(bad);
-
- if (b->verbose > 2) {
- printf(" Flip sub edge (%d, %d).\n", pointmark(pa), pointmark(pb));
- }
-
- // Save the old configuration outside the quadrilateral.
- senext(abc, oldbc);
- senext2(abc, oldca);
- senext(bad, oldad);
- senext2(bad, olddb);
- // Get the outside connection. Becareful if there is a subsegment on the
- // quadrilateral, two casings (casin and casout) are needed to save for
- // keeping the face link.
- spivot(oldbc, bccasout);
- sspivot(oldbc, bc);
- if (bc.sh != dummysh) {
- // 'bc' is a subsegment.
- assert(bccasout.sh != dummysh);
- if (oldbc.sh != bccasout.sh) {
- // 'oldbc' is not self-bonded.
- spinsh = bccasout;
- do {
- bccasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != oldbc.sh);
- } else {
- bccasout.sh = dummysh;
- }
- ssdissolve(oldbc);
- }
- spivot(oldca, cacasout);
- sspivot(oldca, ca);
- if (ca.sh != dummysh) {
- // 'ca' is a subsegment.
- assert(cacasout.sh != dummysh);
- if (oldca.sh != cacasout.sh) {
- // 'oldca' is not self-bonded.
- spinsh = cacasout;
- do {
- cacasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != oldca.sh);
- } else {
- cacasout.sh = dummysh;
- }
- ssdissolve(oldca);
- }
- spivot(oldad, adcasout);
- sspivot(oldad, ad);
- if (ad.sh != dummysh) {
- // 'ad' is a subsegment.
- assert(adcasout.sh != dummysh);
- if (oldad.sh != adcasout.sh) {
- // 'adcasout' is not self-bonded.
- spinsh = adcasout;
- do {
- adcasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != oldad.sh);
- } else {
- adcasout.sh = dummysh;
- }
- ssdissolve(oldad);
- }
- spivot(olddb, dbcasout);
- sspivot(olddb, db);
- if (db.sh != dummysh) {
- // 'db' is a subsegment.
- assert(dbcasout.sh != dummysh);
- if (olddb.sh != dbcasout.sh) {
- // 'dbcasout' is not self-bonded.
- spinsh = dbcasout;
- do {
- dbcasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != olddb.sh);
- } else {
- dbcasout.sh = dummysh;
- }
- ssdissolve(olddb);
- }
-
- // Rotate abc and bad one-quarter turn counterclockwise.
- if (ca.sh != dummysh) {
- if (cacasout.sh != dummysh) {
- sbond1(cacasin, oldbc);
- sbond1(oldbc, cacasout);
- } else {
- // Bond 'oldbc' to itself.
- sbond(oldbc, oldbc);
- // Make sure that dummysh always correctly bonded.
- dummysh[0] = sencode(oldbc);
- }
- ssbond(oldbc, ca);
- } else {
- sbond(oldbc, cacasout);
- }
- if (ad.sh != dummysh) {
- if (adcasout.sh != dummysh) {
- sbond1(adcasin, oldca);
- sbond1(oldca, adcasout);
- } else {
- // Bond 'oldca' to itself.
- sbond(oldca, oldca);
- // Make sure that dummysh always correctly bonded.
- dummysh[0] = sencode(oldca);
- }
- ssbond(oldca, ad);
- } else {
- sbond(oldca, adcasout);
- }
- if (db.sh != dummysh) {
- if (dbcasout.sh != dummysh) {
- sbond1(dbcasin, oldad);
- sbond1(oldad, dbcasout);
- } else {
- // Bond 'oldad' to itself.
- sbond(oldad, oldad);
- // Make sure that dummysh always correctly bonded.
- dummysh[0] = sencode(oldad);
- }
- ssbond(oldad, db);
- } else {
- sbond(oldad, dbcasout);
- }
- if (bc.sh != dummysh) {
- if (bccasout.sh != dummysh) {
- sbond1(bccasin, olddb);
- sbond1(olddb, bccasout);
- } else {
- // Bond 'olddb' to itself.
- sbond(olddb, olddb);
- // Make sure that dummysh always correctly bonded.
- dummysh[0] = sencode(olddb);
- }
- ssbond(olddb, bc);
- } else {
- sbond(olddb, bccasout);
- }
-
- // New vertex assignments for the rotated subfaces.
- setsorg(abc, pd); // Update abc to dca.
- setsdest(abc, pc);
- setsapex(abc, pa);
- setsorg(bad, pc); // Update bad to cdb.
- setsdest(bad, pd);
- setsapex(bad, pb);
-
- if (flipqueue != (queue *) NULL) {
- enqueueflipedge(bccasout, flipqueue);
- enqueueflipedge(cacasout, flipqueue);
- enqueueflipedge(adcasout, flipqueue);
- enqueueflipedge(dbcasout, flipqueue);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// flip() Flips non-locally Delaunay faces in flipqueue until it is empty.//
-// //
-// Assumpation: Current tetrahedralization is non-Delaunay after inserting //
-// a point or performing a flip operation, all possibly non-Delaunay faces //
-// are in 'flipqueue'. //
-// //
-// If 'plastflip' is not NULL, it is used to return a stack of recently //
-// flipped faces. This stack will be used to reverse the flips done in this //
-// routine later for removing a newly inserted point because it encroaches //
-// any subfaces or subsegments. //
-// //
-// If the quality mesh step is starting, (indicated by pools 'badsubsegs', //
-// 'badsubfaces' and 'badtetrahedrons' are not NULLs.) we will check the //
-// encroached subface or subsegments of a hull face, and queuing tetrahedra //
-// for quality checking. //
-// //
-// The return value is the total number of flips done during this invocation.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-long tetgenmesh::flip(queue* flipqueue, flipstacker **plastflip)
-{
- badface *qface;
- flipstacker *newflip;
- triface flipface, symface;
- face checkseg, checksh;
- enum fliptype fc;
- bool flipped;
- REAL sign, bakepsilon;
- long flipcount;
- int epscount;
- int i;
-
- if (b->verbose > 1) {
- printf(" Do flipface queue: %ld faces.\n", flipqueue->len());
- }
-
- flipcount = flip23s + flip32s + flip22s + flip44s;
-
- if (plastflip != (flipstacker **) NULL) {
- // Initialize the stack of the flip sequence.
- flipstackers->restart();
- *plastflip = (flipstacker *) NULL;
- }
-
- // Loop until the queue is empty.
- while ((qface = (badface *) flipqueue->pop()) != NULL) {
- // Get a face.
- flipface = qface->tt;
- // Check the validity of this face.
- if (isdead(&flipface) || flipface.tet == dummytet ||
- (org(flipface) != qface->forg) ||
- (dest(flipface) != qface->fdest) ||
- (apex(flipface) != qface->fapex) ||
- (oppo(flipface) == (point) NULL)) continue;
- flipped = false;
- sym(flipface, symface);
- // Only do check when the adjacent tet exists and it's not a "fake" tet.
- if (symface.tet != dummytet && oppo(symface) != (point) NULL) {
- // For positive orientation that insphere() test requires.
- adjustedgering(flipface, CW);
- sign = insphere(org(flipface), dest(flipface), apex(flipface),
- oppo(flipface), oppo(symface));
- } else {
- sign = -1.0; // A hull face is locally Delaunay.
- }
- if (sign > 0.0) {
- // 'flipface' is non-locally Delaunay, try to flip it.
- if (checksubfaces) {
- bakepsilon = b->epsilon;
- epscount = 0;
- while (epscount < 16) {
- fc = categorizeface(flipface);
- if (fc == NONCONVEX) {
- b->epsilon *= 1e-2;
- epscount++;
- continue;
- }
- break;
- }
- b->epsilon = bakepsilon;
- // assert(epscount < 16);
- if (epscount == 16) {
- if (b->verbose) {
- printf("Warning: Can't flip a degenerate tetrahedron.\n");
- }
- fc = NONCONVEX;
- }
- } else {
- fc = categorizeface(flipface);
- assert(fc != NONCONVEX);
- }
- switch (fc) {
- // The following face types are flipable.
- case T44:
- case T22:
- flip22(&flipface, flipqueue);
- flipped = true;
- break;
- case T23:
- flip23(&flipface, flipqueue);
- flipped = true;
- break;
- case T32:
- flip32(&flipface, flipqueue);
- flipped = true;
- break;
- // The following face types are unflipable.
- case UNFLIPABLE:
- break;
- case FORBIDDENFACE:
- // Meet an encroaching subface, unflipable.
- break;
- case FORBIDDENEDGE:
- // Meet an encroaching subsegment, unflipable.
- break;
- // This case is only possible when the domain is nonconvex.
- case NONCONVEX:
- assert(nonconvex);
- break;
- }
- if (plastflip != (flipstacker **) NULL && flipped) {
- // Push the flipped face into stack.
- newflip = (flipstacker *) flipstackers->alloc();
- newflip->flippedface = flipface;
- newflip->fc = fc;
- newflip->forg = org(flipface);
- newflip->fdest = dest(flipface);
- newflip->fapex = apex(flipface);
- newflip->prevflip = *plastflip;
- *plastflip = newflip;
- }
- }
- if (!flipped) {
- // 'flipface' is locally Delaunay, or it is non-locally Delaunay but
- // not flipable because it is a subface or contains a subsegment.
- if (badsubsegs != (memorypool *) NULL) {
- // Check for encroaching subsegments, add them into list.
- for (i = 0; i < 3; i++) {
- tsspivot(&flipface, &checkseg);
- if ((checkseg.sh != dummysh) && !shell2badface(checkseg)) {
- checkseg4encroach(&checkseg, NULL, true);
- }
- enextself(flipface);
- }
- }
- if (badsubfaces != (memorypool *) NULL) {
- // Check for encroaching subface, add it into list.
- tspivot(flipface, checksh);
- if ((checksh.sh != dummysh) && !shell2badface(checksh)) {
- checksub4encroach(&checksh, NULL, true);
- }
- }
- if (badtetrahedrons != (memorypool *) NULL) {
- // Put the tetrahedra at both sides into list for quality check.
- qualchecktetlist->append(&flipface);
- if (symface.tet != dummytet) {
- qualchecktetlist->append(&symface);
- }
- }
- }
- }
-
- flipcount = flip23s + flip32s + flip22s + flip44s - flipcount;
- if (b->verbose > 1) {
- printf(" %ld flips.\n", flipcount);
- }
-
- return flipcount;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// undoflip() Undo the most recent flip sequence induced by flip(). //
-// //
-// 'lastflip' is the stack of recently flipped faces. Walks through the list //
-// of flips, in the reverse of the order in which they were done, and undoes //
-// them. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::undoflip(flipstacker *lastflip)
-{
- while (lastflip != (flipstacker *) NULL) {
- // Get the right flipped face.
- findface(&lastflip->flippedface, lastflip->forg, lastflip->fdest,
- lastflip->fapex);
- switch (lastflip->fc) {
- case T23:
- // The reverse operation of T23 is T32.
- flip32(&lastflip->flippedface, NULL);
- break;
- case T32:
- // The reverse operation of T32 is T23.
- flip23(&lastflip->flippedface, NULL);
- break;
- case T22:
- case T44:
- // The reverse operation of T22 or T44 is again T22 or T44.
- flip22(&lastflip->flippedface, NULL);
- break;
- }
- // Go on and process the next transformation.
- lastflip = lastflip->prevflip;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// splittetrahedron() Insert a point into a tetrahedron, split it into //
-// four tetrahedra. //
-// //
-// The tetrahedron is given by 'splittet'. Let it is abcd. The inserting //
-// point 'newpoint' v should lie strictly inside abcd. //
-// //
-// Splitting a tetrahedron is to shrink abcd to abcv, and create three new //
-// tetrahedra badv, cbdv, and acdv. //
-// //
-// On completion, 'splittet' returns abcv. If 'flipqueue' is not NULL, it //
-// contains all possibly non-locally Delaunay faces. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-splittetrahedron(point newpoint, triface* splittet, queue* flipqueue)
-{
- triface oldabd, oldbcd, oldcad; // Old configuration.
- triface abdcasing, bcdcasing, cadcasing;
- face abdsh, bcdsh, cadsh;
- triface abcv, badv, cbdv, acdv; // New configuration.
- point pa, pb, pc, pd;
- REAL attrib, volume;
- int i;
-
- abcv = *splittet;
- abcv.ver = 0;
- // Set the changed vertices and new tetrahedron.
- pa = org(abcv);
- pb = dest(abcv);
- pc = apex(abcv);
- pd = oppo(abcv);
-
- if (b->verbose > 1) {
- printf(" Inserting point %d in tetrahedron (%d, %d, %d, %d).\n",
- pointmark(newpoint), pointmark(pa), pointmark(pb), pointmark(pc),
- pointmark(pd));
- }
-
- fnext(abcv, oldabd);
- enextfnext(abcv, oldbcd);
- enext2fnext(abcv, oldcad);
- sym(oldabd, abdcasing);
- sym(oldbcd, bcdcasing);
- sym(oldcad, cadcasing);
- maketetrahedron(&badv);
- maketetrahedron(&cbdv);
- maketetrahedron(&acdv);
-
- // Set 'badv' vertices.
- setorg (badv, pb);
- setdest(badv, pa);
- setapex(badv, pd);
- setoppo(badv, newpoint);
- // Set 'cbdv' vertices.
- setorg (cbdv, pc);
- setdest(cbdv, pb);
- setapex(cbdv, pd);
- setoppo(cbdv, newpoint);
- // Set 'acdv' vertices.
- setorg (acdv, pa);
- setdest(acdv, pc);
- setapex(acdv, pd);
- setoppo(acdv, newpoint);
- // Set 'abcv' vertices
- setoppo(abcv, newpoint);
-
- // Set the element attributes of the new tetrahedra.
- for (i = 0; i < in->numberoftetrahedronattributes; i++) {
- attrib = elemattribute(abcv.tet, i);
- setelemattribute(badv.tet, i, attrib);
- setelemattribute(cbdv.tet, i, attrib);
- setelemattribute(acdv.tet, i, attrib);
- }
- // Set the volume constraint of the new tetrahedra.
- if (b->varvolume) {
- volume = volumebound(abcv.tet);
- setvolumebound(badv.tet, volume);
- setvolumebound(cbdv.tet, volume);
- setvolumebound(acdv.tet, volume);
- }
-
- // Bond the new triangles to the surrounding tetrahedron.
- bond(badv, abdcasing);
- bond(cbdv, bcdcasing);
- bond(acdv, cadcasing);
- // There may exist subfaces need to be bonded to the new tetrahedra.
- if (checksubfaces) {
- tspivot(oldabd, abdsh);
- if (abdsh.sh != dummysh) {
- tsdissolve(oldabd);
- tsbond(badv, abdsh);
- }
- tspivot(oldbcd, bcdsh);
- if (bcdsh.sh != dummysh) {
- tsdissolve(oldbcd);
- tsbond(cbdv, bcdsh);
- }
- tspivot(oldcad, cadsh);
- if (cadsh.sh != dummysh) {
- tsdissolve(oldcad);
- tsbond(acdv, cadsh);
- }
- }
- badv.loc = 3;
- cbdv.loc = 2;
- bond(badv, cbdv);
- cbdv.loc = 3;
- acdv.loc = 2;
- bond(cbdv, acdv);
- acdv.loc = 3;
- badv.loc = 2;
- bond(acdv, badv);
- badv.loc = 1;
- bond(badv, oldabd);
- cbdv.loc = 1;
- bond(cbdv, oldbcd);
- acdv.loc = 1;
- bond(acdv, oldcad);
-
- badv.loc = 0;
- cbdv.loc = 0;
- acdv.loc = 0;
- if (b->verbose > 3) {
- printf(" Updating abcv ");
- printtet(&abcv);
- printf(" Creating badv ");
- printtet(&badv);
- printf(" Creating cbdv ");
- printtet(&cbdv);
- printf(" Creating acdv ");
- printtet(&acdv);
- }
-
- if (flipqueue != (queue *) NULL) {
- enqueueflipface(abcv, flipqueue);
- enqueueflipface(badv, flipqueue);
- enqueueflipface(cbdv, flipqueue);
- enqueueflipface(acdv, flipqueue);
- }
-
- // Save a handle for quick point location.
- recenttet = abcv;
- // Set the return handle be abcv.
- *splittet = abcv;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// unsplittetrahedron() Reverse the operation of inserting a point into a //
-// tetrahedron, so as to remove the newly inserted //
-// point from the mesh. //
-// //
-// Assume the origional tetrahedron is abcd, it was split by v into four //
-// tetrahedra abcv, badv, cbdv, and acdv. 'splittet' represents face abc of //
-// abcv (i.e., its opposite is v). //
-// //
-// Point v is removed by expanding abcv to abcd, deleting three tetrahedra //
-// badv, cbdv and acdv. On return, point v is not deleted in this routine. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::unsplittetrahedron(triface* splittet)
-{
- triface abcv, badv, cbdv, acdv;
- triface oldabv, oldbcv, oldcav;
- triface badcasing, cbdcasing, acdcasing;
- face badsh, cbdsh, acdsh;
-
- abcv = *splittet;
- adjustedgering(abcv, CCW); // for sure.
- fnext(abcv, oldabv);
- fnext(oldabv, badv);
- esymself(badv);
- enextfnext(abcv, oldbcv);
- fnext(oldbcv, cbdv);
- esymself(cbdv);
- enext2fnext(abcv, oldcav);
- fnext(oldcav, acdv);
- esymself(acdv);
-
- if (b->verbose > 1) {
- printf(" Removing point %d in tetrahedron (%d, %d, %d, %d).\n",
- pointmark(oppo(abcv)), pointmark(org(abcv)), pointmark(dest(abcv)),
- pointmark(apex(abcv)), pointmark(apex(badv)));
- }
-
- sym(badv, badcasing);
- tspivot(badv, badsh);
- sym(cbdv, cbdcasing);
- tspivot(cbdv, cbdsh);
- sym(acdv, acdcasing);
- tspivot(acdv, acdsh);
-
- // Expanding abcv to abcd.
- setoppo(abcv, apex(badv));
- bond(oldabv, badcasing);
- if (badsh.sh != dummysh) {
- tsbond(oldabv, badsh);
- }
- bond(oldbcv, cbdcasing);
- if (cbdsh.sh != dummysh) {
- tsbond(oldbcv, cbdsh);
- }
- bond(oldcav, acdcasing);
- if (acdsh.sh != dummysh) {
- tsbond(oldcav, acdsh);
- }
-
- // Delete the three split-out tetrahedra.
- tetrahedrondealloc(badv.tet);
- tetrahedrondealloc(cbdv.tet);
- tetrahedrondealloc(acdv.tet);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// splittetface() Insert a point on a face of a mesh. //
-// //
-// 'splittet' is the splitting face. Let it is abcd, where abc is the face //
-// will be split. If abc is not a hull face, abce is the tetrahedron at the //
-// opposite of d. //
-// //
-// To split face abc by a point v is to shrink the tetrahedra abcd to abvd, //
-// create two new tetrahedra bcvd, cavd. If abc is not a hull face, shrink //
-// the tetrahedra bace to bave, create two new tetrahedra cbve, acve. //
-// //
-// If abc is a subface, it is split into three subfaces simultaneously by //
-// calling routine splitsubface(), hence, abv, bcv, cav. The edge rings of //
-// the split subfaces have the same orientation as abc's. //
-// //
-// On completion, 'splittet' returns abvd. If 'flipqueue' is not NULL, it //
-// contains all possibly non-locally Delaunay faces. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-splittetface(point newpoint, triface* splittet, queue* flipqueue)
-{
- triface abcd, bace; // Old configuration.
- triface oldbcd, oldcad, oldace, oldcbe;
- triface bcdcasing, cadcasing, acecasing, cbecasing;
- face abcsh, bcdsh, cadsh, acesh, cbesh;
- triface abvd, bcvd, cavd, bave, cbve, acve; // New configuration.
- point pa, pb, pc, pd, pe;
- REAL attrib, volume;
- bool mirrorflag;
- int i;
-
- abcd = *splittet;
- // abcd.ver = 0; // Adjust to be CCW edge ring.
- adjustedgering(abcd, CCW);
- pa = org(abcd);
- pb = dest(abcd);
- pc = apex(abcd);
- pd = oppo(abcd);
- // Is there a second tetrahderon?
- mirrorflag = issymexist(&abcd);
- if (mirrorflag) {
- // This is an interior face.
- sym(abcd, bace);
- findedge(&bace, dest(abcd), org(abcd));
- pe = oppo(bace);
- }
- if (checksubfaces) {
- // Is there a subface need to be split together?
- tspivot(abcd, abcsh);
- if (abcsh.sh != dummysh) {
- // Exists! Keep the edge ab of both handles be the same.
- findedge(&abcsh, org(abcd), dest(abcd));
- }
- }
-
- if (b->verbose > 1) {
- printf(" Inserting point %d on face (%d, %d, %d).\n", pointmark(newpoint),
- pointmark(pa), pointmark(pb), pointmark(pc));
- }
-
-#ifdef SELF_CHECK
- // Make sure no inversed tetrahedron has been created.
- assert(orient3d(pa, pb, pd, newpoint) >= 0.0);
- assert(orient3d(pb, pc, pd, newpoint) >= 0.0);
- assert(orient3d(pc, pa, pd, newpoint) >= 0.0);
-#endif
-
- // Save the old configuration at faces bcd and cad.
- enextfnext(abcd, oldbcd);
- enext2fnext(abcd, oldcad);
- sym(oldbcd, bcdcasing);
- sym(oldcad, cadcasing);
- // Create two new tetrahedra.
- maketetrahedron(&bcvd);
- maketetrahedron(&cavd);
- if (mirrorflag) {
- // Save the old configuration at faces bce and cae.
- enextfnext(bace, oldace);
- enext2fnext(bace, oldcbe);
- sym(oldace, acecasing);
- sym(oldcbe, cbecasing);
- // Create two new tetrahedra.
- maketetrahedron(&acve);
- maketetrahedron(&cbve);
- } else {
- // Splitting a boundary face increases the number of boundary faces.
- hullsize += 2;
- }
-
- // Set vertices to the changed tetrahedron and new tetrahedra.
- abvd = abcd; // Update 'abcd' to 'abvd'.
- setapex(abvd, newpoint);
- setorg (bcvd, pb); // Set 'bcvd'.
- setdest(bcvd, pc);
- setapex(bcvd, newpoint);
- setoppo(bcvd, pd);
- setorg (cavd, pc); // Set 'cavd'.
- setdest(cavd, pa);
- setapex(cavd, newpoint);
- setoppo(cavd, pd);
- // Set the element attributes of the new tetrahedra.
- for (i = 0; i < in->numberoftetrahedronattributes; i++) {
- attrib = elemattribute(abvd.tet, i);
- setelemattribute(bcvd.tet, i, attrib);
- setelemattribute(cavd.tet, i, attrib);
- }
- if (b->varvolume) {
- // Set the area constraint of the new tetrahedra.
- volume = volumebound(abvd.tet);
- setvolumebound(bcvd.tet, volume);
- setvolumebound(cavd.tet, volume);
- }
- if (mirrorflag) {
- bave = bace; // Update 'bace' to 'bave'.
- setapex(bave, newpoint);
- setorg (acve, pa); // Set 'acve'.
- setdest(acve, pc);
- setapex(acve, newpoint);
- setoppo(acve, pe);
- setorg (cbve, pc); // Set 'cbve'.
- setdest(cbve, pb);
- setapex(cbve, newpoint);
- setoppo(cbve, pe);
- // Set the element attributes of the new tetrahedra.
- for (i = 0; i < in->numberoftetrahedronattributes; i++) {
- attrib = elemattribute(bave.tet, i);
- setelemattribute(acve.tet, i, attrib);
- setelemattribute(cbve.tet, i, attrib);
- }
- if (b->varvolume) {
- // Set the area constraint of the new tetrahedra.
- volume = volumebound(bave.tet);
- setvolumebound(acve.tet, volume);
- setvolumebound(cbve.tet, volume);
- }
- }
-
- // Bond the new tetrahedra to the surrounding tetrahedra.
- bcvd.loc = 1;
- bond(bcvd, bcdcasing);
- cavd.loc = 1;
- bond(cavd, cadcasing);
- bcvd.loc = 3;
- bond(bcvd, oldbcd);
- cavd.loc = 2;
- bond(cavd, oldcad);
- bcvd.loc = 2;
- cavd.loc = 3;
- bond(bcvd, cavd);
- if (mirrorflag) {
- acve.loc = 1;
- bond(acve, acecasing);
- cbve.loc = 1;
- bond(cbve, cbecasing);
- acve.loc = 3;
- bond(acve, oldace);
- cbve.loc = 2;
- bond(cbve, oldcbe);
- acve.loc = 2;
- cbve.loc = 3;
- bond(acve, cbve);
- // Bond two new coplanar facets.
- bcvd.loc = 0;
- cbve.loc = 0;
- bond(bcvd, cbve);
- cavd.loc = 0;
- acve.loc = 0;
- bond(cavd, acve);
- }
-
- // There may exist subface needed to be bonded to the new tetrahedra.
- if (checksubfaces) {
- tspivot(oldbcd, bcdsh);
- if (bcdsh.sh != dummysh) {
- tsdissolve(oldbcd);
- bcvd.loc = 1;
- tsbond(bcvd, bcdsh);
- }
- tspivot(oldcad, cadsh);
- if (cadsh.sh != dummysh) {
- tsdissolve(oldcad);
- cavd.loc = 1;
- tsbond(cavd, cadsh);
- }
- if (mirrorflag) {
- tspivot(oldace, acesh);
- if (acesh.sh != dummysh) {
- tsdissolve(oldace);
- acve.loc = 1;
- tsbond(acve, acesh);
- }
- tspivot(oldcbe, cbesh);
- if (cbesh.sh != dummysh) {
- tsdissolve(oldcbe);
- cbve.loc = 1;
- tsbond(cbve, cbesh);
- }
- }
- // Is there a subface needs to be split together?
- if (abcsh.sh != dummysh) {
- // Split this subface 'abc' into three i.e, abv, bcv, cav.
- splitsubface(newpoint, &abcsh, (queue *) NULL);
- }
- }
-
- // Save a handle for quick point location.
- recenttet = abvd;
- // Set the return handle be abvd.
- *splittet = abvd;
-
- bcvd.loc = 0;
- cavd.loc = 0;
- if (mirrorflag) {
- cbve.loc = 0;
- acve.loc = 0;
- }
- if (b->verbose > 3) {
- printf(" Updating abvd ");
- printtet(&abvd);
- printf(" Creating bcvd ");
- printtet(&bcvd);
- printf(" Creating cavd ");
- printtet(&cavd);
- if (mirrorflag) {
- printf(" Updating bave ");
- printtet(&bave);
- printf(" Creating cbve ");
- printtet(&cbve);
- printf(" Creating acve ");
- printtet(&acve);
- }
- }
-
- if (flipqueue != (queue *) NULL) {
- fnextself(abvd);
- enqueueflipface(abvd, flipqueue);
- fnextself(bcvd);
- enqueueflipface(bcvd, flipqueue);
- fnextself(cavd);
- enqueueflipface(cavd, flipqueue);
- if (mirrorflag) {
- fnextself(bave);
- enqueueflipface(bave, flipqueue);
- fnextself(cbve);
- enqueueflipface(cbve, flipqueue);
- fnextself(acve);
- enqueueflipface(acve, flipqueue);
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// unsplittetface() Reverse the operation of inserting a point on a face, //
-// so as to remove the newly inserted point. //
-// //
-// Assume the original face is abc, the tetrahedron containing abc is abcd. //
-// If abc is not a hull face, bace is the tetrahedron at the opposite of d. //
-// After face abc was split by a point v, tetrahedron abcd had been split //
-// into three tetrahedra, abvd, bcvd, cavd, and bace (if it exists) had been //
-// split into bave, cbve, acve. 'splittet' represents abvd (its apex is v). //
-// //
-// Point v is removed by expanding abvd to abcd, deleting two tetrahedra //
-// bcvd, cavd. Expanding bave(if it exists) to bace, deleting two tetrahedra //
-// cbve, acve. If abv is a subface, routine unsplitsubface() will be called //
-// to reverse the operation of splitting a subface. On completion, point v //
-// is not deleted in this routine. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::unsplittetface(triface* splittet)
-{
- triface abvd, bcvd, cavd, bave, cbve, acve;
- triface oldbvd, oldvad, oldvbe, oldave;
- triface bcdcasing, cadcasing, cbecasing, acecasing;
- face bcdsh, cadsh, cbesh, acesh;
- face abvsh;
- bool mirrorflag;
-
- abvd = *splittet;
- adjustedgering(abvd, CCW); // for sure.
- enextfnext(abvd, oldbvd);
- fnext(oldbvd, bcvd);
- esymself(bcvd);
- enextself(bcvd);
- enext2fnext(abvd, oldvad);
- fnext(oldvad, cavd);
- esymself(cavd);
- enext2self(cavd);
- // Is there a second tetrahedron?
- sym(abvd, bave);
- mirrorflag = bave.tet != dummytet;
- if (mirrorflag) {
- findedge(&bave, dest(abvd), org(abvd));
- enextfnext(bave, oldave);
- fnext(oldave, acve);
- esymself(acve);
- enextself(acve);
- enext2fnext(bave, oldvbe);
- fnext(oldvbe, cbve);
- esymself(cbve);
- enext2self(cbve);
- } else {
- // Unsplit a hull face decrease the number of boundary faces.
- hullsize -= 2;
- }
- // Is there a subface at abv.
- tspivot(abvd, abvsh);
- if (abvsh.sh != dummysh) {
- // Exists! Keep the edge ab of both handles be the same.
- findedge(&abvsh, org(abvd), dest(abvd));
- }
-
- if (b->verbose > 1) {
- printf(" Removing point %d on face (%d, %d, %d).\n",
- pointmark(apex(abvd)), pointmark(org(abvd)), pointmark(dest(abvd)),
- pointmark(dest(bcvd)));
- }
-
- fnextself(bcvd); // bcvd has changed to bcdv.
- sym(bcvd, bcdcasing);
- tspivot(bcvd, bcdsh);
- fnextself(cavd); // cavd has changed to cadv.
- sym(cavd, cadcasing);
- tspivot(cavd, cadsh);
- if (mirrorflag) {
- fnextself(acve); // acve has changed to acev.
- sym(acve, acecasing);
- tspivot(acve, acesh);
- fnextself(cbve); // cbve has changed to cbev.
- sym(cbve, cbecasing);
- tspivot(cbve, cbesh);
- }
-
- // Expand abvd to abcd.
- setapex(abvd, dest(bcvd));
- bond(oldbvd, bcdcasing);
- if (bcdsh.sh != dummysh) {
- tsbond(oldbvd, bcdsh);
- }
- bond(oldvad, cadcasing);
- if (cadsh.sh != dummysh) {
- tsbond(oldvad, cadsh);
- }
- if (mirrorflag) {
- // Expanding bave to bace.
- setapex(bave, dest(acve));
- bond(oldave, acecasing);
- if (acesh.sh != dummysh) {
- tsbond(oldave, acesh);
- }
- bond(oldvbe, cbecasing);
- if (cbesh.sh != dummysh) {
- tsbond(oldvbe, cbesh);
- }
- }
-
- // Unsplit a subface if there exists.
- if (abvsh.sh != dummysh) {
- unsplitsubface(&abvsh);
- }
-
- // Delete the split-out tetrahedra.
- tetrahedrondealloc(bcvd.tet);
- tetrahedrondealloc(cavd.tet);
- if (mirrorflag) {
- tetrahedrondealloc(acve.tet);
- tetrahedrondealloc(cbve.tet);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// splitsubface() Insert a point on a subface, split it into three. //
-// //
-// The subface is 'splitface'. Let it is abc. The inserting point 'newpoint'//
-// v should lie inside abc. If the neighbor tetrahedra of abc exist, i.e., //
-// abcd and bace, they should have been split by routine splittetface() //
-// before calling this routine, so the connection between the new tetrahedra //
-// and new subfaces can be correctly set. //
-// //
-// To split subface abc by point v is to shrink abc to abv, create two new //
-// subfaces bcv and cav. Set the connection between updated and new created //
-// subfaces. If there is a subsegment at edge bc or ca, connection of new //
-// subface (bcv or cav) to its casing subfaces is a face link, 'casingin' is //
-// the predecessor and 'casingout' is the successor. It is important to keep //
-// the orientations of the edge rings of the updated and created subfaces be //
-// the same as abc's. So they have the same orientation as other subfaces of //
-// this facet with respect to the lift point of this facet. //
-// //
-// On completion, 'splitface' returns abv. If 'flipqueue' is not NULL, it //
-// returns all possibly non-Delaunay edges. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-splitsubface(point newpoint, face* splitface, queue* flipqueue)
-{
- triface abvd, bcvd, cavd, bave, cbve, acve;
- face abc, oldbc, oldca, bc, ca, spinsh;
- face bccasin, bccasout, cacasin, cacasout;
- face abv, bcv, cav;
- point pa, pb, pc;
-
- abc = *splitface;
- // The newly created subfaces will have the same edge ring as abc.
- adjustedgering(abc, CCW);
- pa = sorg(abc);
- pb = sdest(abc);
- pc = sapex(abc);
-
- if (b->verbose > 1) {
- printf(" Inserting point %d on subface (%d, %d, %d).\n",
- pointmark(newpoint), pointmark(pa), pointmark(pb), pointmark(pc));
- }
-
- // Save the old configuration at edge bc and ca. Subsegments may appear
- // at both sides, save the face links and dissolve them.
- senext(abc, oldbc);
- senext2(abc, oldca);
- spivot(oldbc, bccasout);
- sspivot(oldbc, bc);
- if (bc.sh != dummysh) {
- if (oldbc.sh != bccasout.sh) {
- // 'oldbc' is not self-bonded.
- spinsh = bccasout;
- do {
- bccasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != oldbc.sh);
- } else {
- bccasout.sh = dummysh;
- }
- ssdissolve(oldbc);
- }
- spivot(oldca, cacasout);
- sspivot(oldca, ca);
- if (ca.sh != dummysh) {
- if (oldca.sh != cacasout.sh) {
- // 'oldca' is not self-bonded.
- spinsh = cacasout;
- do {
- cacasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != oldca.sh);
- } else {
- cacasout.sh = dummysh;
- }
- ssdissolve(oldca);
- }
- // Create two new subfaces.
- makeshellface(subfaces, &bcv);
- makeshellface(subfaces, &cav);
-
- // Set the vertices of changed and new subfaces.
- abv = abc; // Update 'abc' to 'abv'.
- setsapex(abv, newpoint);
- setsorg(bcv, pb); // Set 'bcv'.
- setsdest(bcv, pc);
- setsapex(bcv, newpoint);
- setsorg(cav, pc); // Set 'cav'.
- setsdest(cav, pa);
- setsapex(cav, newpoint);
- if (b->quality) {
- // Copy yhr area bound into the new subfaces.
- setareabound(bcv, areabound(abv));
- setareabound(cav, areabound(abv));
- }
- // Copy the boundary mark into the new subfaces.
- setshellmark(bcv, shellmark(abv));
- setshellmark(cav, shellmark(abv));
- // Copy the subface type into the new subfaces.
- setshelltype(bcv, shelltype(abv));
- setshelltype(cav, shelltype(abv));
- // Bond the new subfaces to the surrounding subfaces.
- if (bc.sh != dummysh) {
- if (bccasout.sh != dummysh) {
- sbond1(bccasin, bcv);
- sbond1(bcv, bccasout);
- } else {
- // Bond 'bcv' to itsself.
- sbond(bcv, bcv);
- }
- ssbond(bcv, bc);
- } else {
- sbond(bcv, bccasout);
- }
- if (ca.sh != dummysh) {
- if (cacasout.sh != dummysh) {
- sbond1(cacasin, cav);
- sbond1(cav, cacasout);
- } else {
- // Bond 'cav' to itself.
- sbond(cav, cav);
- }
- ssbond(cav, ca);
- } else {
- sbond(cav, cacasout);
- }
- senext2self(bcv);
- sbond(bcv, oldbc);
- senextself(cav);
- sbond(cav, oldca);
- senext2self(bcv);
- senextself(cav);
- sbond(bcv, cav);
-
- // Bond the new subfaces to the new tetrahedra if they exist.
- stpivot(abv, abvd);
- if (abvd.tet != dummytet) {
- // Get two new tetrahedra and their syms.
- findedge(&abvd, sorg(abv), sdest(abv));
- enextfnext(abvd, bcvd);
- assert(bcvd.tet != dummytet);
- fnextself(bcvd);
- enext2fnext(abvd, cavd);
- assert(cavd.tet != dummytet);
- fnextself(cavd);
- // Bond two new subfaces to the two new tetrahedra.
- tsbond(bcvd, bcv);
- tsbond(cavd, cav);
- }
- // Set the connection at the other sides if the tetrahedra exist.
- sesymself(abv); // bav
- stpivot(abv, bave);
- if (bave.tet != dummytet) {
- sesymself(bcv); // cbv
- sesymself(cav); // acv
- // Get two new tetrahedra and their syms.
- findedge(&bave, sorg(abv), sdest(abv));
- enextfnext(bave, acve);
- assert(acve.tet != dummytet);
- fnextself(acve);
- enext2fnext(bave, cbve);
- assert(cbve.tet != dummytet);
- fnextself(cbve);
- // Bond two new subfaces to the two new tetrahedra.
- tsbond(acve, cav);
- tsbond(cbve, bcv);
- }
-
- bcv.shver = 0;
- cav.shver = 0;
- if (b->verbose > 3) {
- printf(" Updating abv ");
- printsh(&abv);
- printf(" Creating bcv ");
- printsh(&bcv);
- printf(" Creating cav ");
- printsh(&cav);
- }
-
- if (flipqueue != (queue *) NULL) {
- enqueueflipedge(abv, flipqueue);
- enqueueflipedge(bcv, flipqueue);
- enqueueflipedge(cav, flipqueue);
- }
-
- // Set the return handle be abv.
- *splitface = abv;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// unsplitsubface() Reverse the operation of inserting a point on a //
-// subface, so as to remove the newly inserted point. //
-// //
-// Assume the original subface is abc, it was split by a point v into three //
-// subfaces abv, bcv and cav. 'splitsh' represents abv. //
-// //
-// To remove point v is to expand abv to abc, delete bcv and cav. If edge bc //
-// or ca is a subsegment, the connection at a subsegment is a subface link, //
-// '-casin' and '-casout' are used to save the predecessor and successor of //
-// bcv or cav. On completion, point v is not deleted in this routine. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::unsplitsubface(face* splitsh)
-{
- face abv, bcv, cav;
- face oldbv, oldva, bc, ca, spinsh;
- face bccasin, bccasout, cacasin, cacasout;
-
- abv = *splitsh;
- senext(abv, oldbv);
- spivot(oldbv, bcv);
- if (sorg(bcv) != sdest(oldbv)) {
- sesymself(bcv);
- }
- senextself(bcv);
- senext2(abv, oldva);
- spivot(oldva, cav);
- if (sorg(cav) != sdest(oldva)) {
- sesymself(cav);
- }
- senext2self(cav);
-
- if (b->verbose > 1) {
- printf(" Removing point %d on subface (%d, %d, %d).\n",
- pointmark(sapex(abv)), pointmark(sorg(abv)), pointmark(sdest(abv)),
- pointmark(sdest(bcv)));
- }
-
- spivot(bcv, bccasout);
- sspivot(bcv, bc);
- if (bc.sh != dummysh) {
- if (bcv.sh != bccasout.sh) {
- // 'bcv' is not self-bonded.
- spinsh = bccasout;
- do {
- bccasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != bcv.sh);
- } else {
- bccasout.sh = dummysh;
- }
- }
- spivot(cav, cacasout);
- sspivot(cav, ca);
- if (ca.sh != dummysh) {
- if (cav.sh != cacasout.sh) {
- // 'cav' is not self-bonded.
- spinsh = cacasout;
- do {
- cacasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != cav.sh);
- } else {
- cacasout.sh = dummysh;
- }
- }
-
- // Expand abv to abc.
- setsapex(abv, sdest(bcv));
- if (bc.sh != dummysh) {
- if (bccasout.sh != dummysh) {
- sbond1(bccasin, oldbv);
- sbond1(oldbv, bccasout);
- } else {
- // Bond 'oldbv' to itself.
- sbond(oldbv, oldbv);
- }
- ssbond(oldbv, bc);
- } else {
- sbond(oldbv, bccasout);
- }
- if (ca.sh != dummysh) {
- if (cacasout.sh != dummysh) {
- sbond1(cacasin, oldva);
- sbond1(oldva, cacasout);
- } else {
- // Bond 'oldva' to itself.
- sbond(oldva, oldva);
- }
- ssbond(oldva, ca);
- } else {
- sbond(oldva, cacasout);
- }
-
- // Delete two split-out subfaces.
- shellfacedealloc(subfaces, bcv.sh);
- shellfacedealloc(subfaces, cav.sh);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// splittetedge() Insert a point on an edge of the mesh. //
-// //
-// The edge is given by 'splittet'. Assume its four corners are a, b, n1 and //
-// n2, where ab is the edge will be split. Around ab may exist any number of //
-// tetrahedra. For convenience, they're ordered in a sequence following the //
-// right-hand rule with your thumb points from a to b. Let the vertex set of //
-// these tetrahedra be {a, b, n1, n2, ..., n(i)}. NOTE the tetrahedra around //
-// ab may not connect to each other (can only happen when ab is a subsegment,//
-// hence some faces abn(i) are subfaces). If ab is a subsegment, abn1 must //
-// be a subface. //
-// //
-// To split edge ab by a point v is to split all tetrahedra containing ab by //
-// v. More specifically, for each such tetrahedron, an1n2b, it is shrunk to //
-// an1n2v, and a new tetrahedra bn2n1v is created. If ab is a subsegment, or //
-// some faces of the splitting tetrahedra are subfaces, they must be split //
-// either by calling routine 'splitsubedge()'. //
-// //
-// On completion, 'splittet' returns avn1n2. If 'flipqueue' is not NULL, it //
-// returns all faces which may become non-Delaunay after this operation. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-splittetedge(point newpoint, triface* splittet, queue* flipqueue)
-{
- triface *bots, *newtops;
- triface oldtop, topcasing;
- triface spintet, tmpbond0, tmpbond1;
- face abseg, splitsh, topsh, spinsh;
- point pa, pb, n1, n2;
- REAL attrib, volume;
- int wrapcount, hitbdry;
- int i, j;
-
- if (checksubfaces) {
- // Is there a subsegment need to be split together?
- tsspivot(splittet, &abseg);
- if (abseg.sh != dummysh) {
- abseg.shver = 0;
- // Orient the edge direction of 'splittet' be abseg.
- if (org(*splittet) != sorg(abseg)) {
- esymself(*splittet);
- }
- }
- }
- spintet = *splittet;
- pa = org(spintet);
- pb = dest(spintet);
-
- if (b->verbose > 1) {
- printf(" Inserting point %d on edge (%d, %d).\n",
- pointmark(newpoint), pointmark(pa), pointmark(pb));
- }
-
- // Collect the tetrahedra containing the splitting edge (ab).
- n1 = apex(spintet);
- hitbdry = 0;
- wrapcount = 1;
- if (checksubfaces && abseg.sh != dummysh) {
- // It may happen that some tetrahedra containing ab (a subsegment) are
- // completely disconnected with others. If it happens, use the face
- // link of ab to cross the boundary.
- while (true) {
- if (!fnextself(spintet)) {
- // Meet a boundary, walk through it.
- hitbdry ++;
- tspivot(spintet, spinsh);
- assert(spinsh.sh != dummysh);
- findedge(&spinsh, pa, pb);
- sfnextself(spinsh);
- stpivot(spinsh, spintet);
- assert(spintet.tet != dummytet);
- findedge(&spintet, pa, pb);
- // Remember this position (hull face) in 'splittet'.
- *splittet = spintet;
- // Split two hull faces increase the hull size;
- hullsize += 2;
- }
- if (apex(spintet) == n1) break;
- wrapcount ++;
- }
- if (hitbdry > 0) {
- wrapcount -= hitbdry;
- }
- } else {
- // All the tetrahedra containing ab are connected together. If there
- // are subfaces, 'splitsh' keeps one of them.
- splitsh.sh = dummysh;
- while (hitbdry < 2) {
- if (checksubfaces && splitsh.sh == dummysh) {
- tspivot(spintet, splitsh);
- }
- if (fnextself(spintet)) {
- if (apex(spintet) == n1) break;
- wrapcount++;
- } else {
- hitbdry ++;
- if (hitbdry < 2) {
- esym(*splittet, spintet);
- }
- }
- }
- if (hitbdry > 0) {
- // ab is on the hull.
- wrapcount -= 1;
- // 'spintet' now is a hull face, inverse its edge direction.
- esym(spintet, *splittet);
- // Split two hull faces increases the number of hull faces.
- hullsize += 2;
- }
- }
-
- // Make arrays of updating (bot, oldtop) and new (newtop) tetrahedra.
- bots = new triface[wrapcount];
- newtops = new triface[wrapcount];
- // Spin around ab, gather tetrahedra and set up new tetrahedra.
- spintet = *splittet;
- for (i = 0; i < wrapcount; i++) {
- // Get 'bots[i] = an1n2b'.
- enext2fnext(spintet, bots[i]);
- esymself(bots[i]);
- // Create 'newtops[i]'.
- maketetrahedron(&(newtops[i]));
- // Go to the next.
- fnextself(spintet);
- if (checksubfaces && abseg.sh != dummysh) {
- if (!issymexist(&spintet)) {
- // We meet a hull face, walk through it.
- tspivot(spintet, spinsh);
- assert(spinsh.sh != dummysh);
- findedge(&spinsh, pa, pb);
- sfnextself(spinsh);
- stpivot(spinsh, spintet);
- assert(spintet.tet != dummytet);
- findedge(&spintet, pa, pb);
- }
- }
- }
-
- // Set the vertices of updated and new tetrahedra.
- for (i = 0; i < wrapcount; i++) {
- // Update 'bots[i] = an1n2v'.
- setoppo(bots[i], newpoint);
- // Set 'newtops[i] = bn2n1v'.
- n1 = dest(bots[i]);
- n2 = apex(bots[i]);
- // Set 'newtops[i]'.
- setorg(newtops[i], pb);
- setdest(newtops[i], n2);
- setapex(newtops[i], n1);
- setoppo(newtops[i], newpoint);
- // Set the element attributes of a new tetrahedron.
- for (j = 0; j < in->numberoftetrahedronattributes; j++) {
- attrib = elemattribute(bots[i].tet, j);
- setelemattribute(newtops[i].tet, j, attrib);
- }
- if (b->varvolume) {
- // Set the area constraint of a new tetrahedron.
- volume = volumebound(bots[i].tet);
- setvolumebound(newtops[i].tet, volume);
- }
-#ifdef SELF_CHECK
- // Make sure no inversed tetrahedron has been created.
- assert(orient3d(pa, n1, n2, newpoint) <= 0.0);
- assert(orient3d(pb, n2, n1, newpoint) <= 0.0);
-#endif
- }
-
- // Bond newtops to topcasings and bots.
- for (i = 0; i < wrapcount; i++) {
- // Get 'oldtop = n1n2va' from 'bots[i]'.
- enextfnext(bots[i], oldtop);
- sym(oldtop, topcasing);
- bond(newtops[i], topcasing);
- if (checksubfaces) {
- tspivot(oldtop, topsh);
- if (topsh.sh != dummysh) {
- tsdissolve(oldtop);
- tsbond(newtops[i], topsh);
- }
- }
- enextfnext(newtops[i], tmpbond0);
- bond(oldtop, tmpbond0);
- }
- // Bond between newtops.
- fnext(newtops[0], tmpbond0);
- enext2fnext(bots[0], spintet);
- for (i = 1; i < wrapcount; i ++) {
- if (issymexist(&spintet)) {
- enext2fnext(newtops[i], tmpbond1);
- bond(tmpbond0, tmpbond1);
- }
- fnext(newtops[i], tmpbond0);
- enext2fnext(bots[i], spintet);
- }
- // Bond the last to the first if no boundary.
- if (issymexist(&spintet)) {
- enext2fnext(newtops[0], tmpbond1);
- bond(tmpbond0, tmpbond1);
- }
-
- // Is there exist subfaces and subsegment need to be split?
- if (checksubfaces) {
- if (abseg.sh != dummysh) {
- // A subsegment needs be split.
- spivot(abseg, splitsh);
- assert(splitsh.sh != dummysh);
- }
- if (splitsh.sh != dummysh) {
- // Split subfaces (and subsegment).
- findedge(&splitsh, pa, pb);
- splitsubedge(newpoint, &splitsh, (queue *) NULL);
- }
- }
-
- if (b->verbose > 3) {
- for (i = 0; i < wrapcount; i++) {
- printf(" Updating bots[%i] ", i);
- printtet(&(bots[i]));
- printf(" Creating newtops[%i] ", i);
- printtet(&(newtops[i]));
- }
- }
-
- if (flipqueue != (queue *) NULL) {
- for (i = 0; i < wrapcount; i++) {
- enqueueflipface(bots[i], flipqueue);
- enqueueflipface(newtops[i], flipqueue);
- }
- }
-
- // Set the return handle be avn1n2. It is got by transforming from
- // 'bots[0]' (which is an1n2v).
- fnext(bots[0], spintet); // spintet is an1vn2.
- esymself(spintet); // spintet is n1avn2.
- enextself(spintet); // spintet is avn1n2.
- *splittet = spintet;
-
- delete [] bots;
- delete [] newtops;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// unsplittetedge() Reverse the operation of splitting an edge, so as to //
-// remove the newly inserted point. //
-// //
-// Assume the original edge is ab, the tetrahedron containing ab is abn1n2. //
-// After ab was split by a point v, every tetrahedron containing ab (e.g., //
-// abn1n2) has been split into two (e.g., an1n2v and bn2n1v). 'splittet' //
-// represents avn1n2 (i.e., its destination is v). //
-// //
-// To remove point v is to expand each split tetrahedron containing ab (e.g.,//
-// (avn1n2 to abn1n2), then delete the redundant one(e.g., vbn1n2). If there //
-// exists any subface around ab, routine unsplitsubedge() will be called to //
-// reverse the operation of splitting a edge (or a subsegment) of subfaces. //
-// On completion, point v is not deleted in this routine. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::unsplittetedge(triface* splittet)
-{
- triface *bots, *newtops;
- triface oldtop, topcasing;
- triface spintet;
- face avseg, splitsh, topsh, spinsh;
- point pa, pv, n1;
- int wrapcount, hitbdry;
- int i;
-
- spintet = *splittet;
- pa = org(spintet);
- pv = dest(spintet);
- if (checksubfaces) {
- // Is there a subsegment need to be unsplit together?
- tsspivot(splittet, &avseg);
- if (avseg.sh != dummysh) {
- // The subsegment's direction should conform to 'splittet'.
- if (sorg(avseg) != pa) {
- sesymself(avseg);
- }
- }
- }
-
- n1 = apex(spintet);
- hitbdry = 0;
- wrapcount = 1;
- if (checksubfaces && avseg.sh != dummysh) {
- // It may happen that some tetrahedra containing ab (a subsegment) are
- // completely disconnected with others. If it happens, use the face
- // link of ab to cross the boundary.
- while (true) {
- if (!fnextself(spintet)) {
- // Meet a boundary, walk through it.
- hitbdry ++;
- tspivot(spintet, spinsh);
- assert(spinsh.sh != dummysh);
- findedge(&spinsh, pa, pv);
- sfnextself(spinsh);
- stpivot(spinsh, spintet);
- assert(spintet.tet != dummytet);
- findedge(&spintet, pa, pv);
- // Remember this position (hull face) in 'splittet'.
- *splittet = spintet;
- // Split two hull faces increase the hull size;
- hullsize += 2;
- }
- if (apex(spintet) == n1) break;
- wrapcount ++;
- }
- if (hitbdry > 0) {
- wrapcount -= hitbdry;
- }
- } else {
- // All the tetrahedra containing ab are connected together. If there
- // are subfaces, 'splitsh' keeps one of them.
- splitsh.sh = dummysh;
- while (hitbdry < 2) {
- if (checksubfaces && splitsh.sh == dummysh) {
- tspivot(spintet, splitsh);
- }
- if (fnextself(spintet)) {
- if (apex(spintet) == n1) break;
- wrapcount++;
- } else {
- hitbdry ++;
- if (hitbdry < 2) {
- esym(*splittet, spintet);
- }
- }
- }
- if (hitbdry > 0) {
- // ab is on the hull.
- wrapcount -= 1;
- // 'spintet' now is a hull face, inverse its edge direction.
- esym(spintet, *splittet);
- // Split two hull faces increases the number of hull faces.
- hullsize += 2;
- }
- }
-
- // Make arrays of updating (bot, oldtop) and new (newtop) tetrahedra.
- bots = new triface[wrapcount];
- newtops = new triface[wrapcount];
- // Spin around av, gather tetrahedra and set up new tetrahedra.
- spintet = *splittet;
- for (i = 0; i < wrapcount; i++) {
- // Get 'bots[i] = an1n2v'.
- enext2fnext(spintet, bots[i]);
- esymself(bots[i]);
- // Get 'oldtop = n1n2va'.
- enextfnext(bots[i], oldtop);
- // Get 'newtops[i] = 'bn1n2v'
- fnext(oldtop, newtops[i]); // newtop = n1n2bv
- esymself(newtops[i]); // newtop = n2n1bv
- enext2self(newtops[i]); // newtop = bn2n1v
- // Go to the next.
- fnextself(spintet);
- if (checksubfaces && avseg.sh != dummysh) {
- if (!issymexist(&spintet)) {
- // We meet a hull face, walk through it.
- tspivot(spintet, spinsh);
- assert(spinsh.sh != dummysh);
- findedge(&spinsh, pa, pv);
- sfnextself(spinsh);
- stpivot(spinsh, spintet);
- assert(spintet.tet != dummytet);
- findedge(&spintet, pa, pv);
- }
- }
- }
-
- if (b->verbose > 1) {
- printf(" Removing point %d from edge (%d, %d).\n",
- pointmark(oppo(bots[0])), pointmark(org(bots[0])),
- pointmark(org(newtops[0])));
- }
-
- for (i = 0; i < wrapcount; i++) {
- // Expand an1n2v to an1n2b.
- setoppo(bots[i], org(newtops[i]));
- // Get 'oldtop = n1n2va' from 'bot[i]'.
- enextfnext(bots[i], oldtop);
- // Get 'topcasing' from 'newtop[i]'
- sym(newtops[i], topcasing);
- // Bond them.
- bond(oldtop, topcasing);
- if (checksubfaces) {
- tspivot(newtops[i], topsh);
- if (topsh.sh != dummysh) {
- tsbond(oldtop, topsh);
- }
- }
- // Delete the tetrahedron above an1n2v.
- tetrahedrondealloc(newtops[i].tet);
- }
-
- // If there exists any subface, unsplit them.
- if (checksubfaces) {
- if (avseg.sh != dummysh) {
- spivot(avseg, splitsh);
- assert(splitsh.sh != dummysh);
- }
- if (splitsh.sh != dummysh) {
- findedge(&splitsh, pa, pv);
- unsplitsubedge(&splitsh);
- }
- }
-
- delete [] bots;
- delete [] newtops;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// splitsubedge() Insert a point on an edge of the surface mesh. //
-// //
-// The splitting edge is given by 'splitsh'. Assume its three corners are a, //
-// b, c, where ab is the edge will be split. ab may be a subsegment. //
-// //
-// To split edge ab is to split all subfaces conatining ab. If ab is not a //
-// subsegment, there are only two subfaces need be split, otherwise, there //
-// may have any number of subfaces need be split. Each splitting subface abc //
-// is shrunk to avc, a new subface vbc is created. It is important to keep //
-// the orientations of edge rings of avc and vbc be the same as abc's. If ab //
-// is a subsegment, it is shrunk to av and a new subsegment vb is created. //
-// //
-// If there are tetrahedra adjoining to the splitting subfaces, they should //
-// be split before calling this routine, so the connection between the new //
-// tetrahedra and the new subfaces can be correctly set. //
-// //
-// On completion, 'splitsh' returns avc. If 'flipqueue' is not NULL, it //
-// returns all edges which may be non-Delaunay. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::splitsubedge(point newpoint, face* splitsh, queue* flipqueue)
-{
- triface abcd, bace, vbcd, bvce;
- face startabc, spinabc, spinsh;
- face oldbc, bccasin, bccasout;
- face ab, bc;
- face avc, vbc, vbc1;
- face av, vb;
- point pa, pb;
-
- startabc = *splitsh;
- // Is there a subsegment?
- sspivot(startabc, ab);
- if (ab.sh != dummysh) {
- ab.shver = 0;
- if (sorg(startabc) != sorg(ab)) {
- sesymself(startabc);
- }
- }
- pa = sorg(startabc);
- pb = sdest(startabc);
-
- if (b->verbose > 1) {
- printf(" Inserting point %d on subedge (%d, %d).\n",
- pointmark(newpoint), pointmark(pa), pointmark(pb));
- }
-
- // Spin arround ab, split every subface containing ab.
- spinabc = startabc;
- do {
- // Adjust spinabc be edge ab.
- if (sorg(spinabc) != pa) {
- sesymself(spinabc);
- }
- // Save old configuration at edge bc, if bc has a subsegment, save the
- // face link of it and dissolve it from bc.
- senext(spinabc, oldbc);
- spivot(oldbc, bccasout);
- sspivot(oldbc, bc);
- if (bc.sh != dummysh) {
- if (spinabc.sh != bccasout.sh) {
- // 'spinabc' is not self-bonded.
- spinsh = bccasout;
- do {
- bccasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != oldbc.sh);
- } else {
- bccasout.sh = dummysh;
- }
- ssdissolve(oldbc);
- }
- // Create a new subface.
- makeshellface(subfaces, &vbc);
- // Split abc.
- avc = spinabc; // Update 'abc' to 'avc'.
- setsdest(avc, newpoint);
- // Make 'vbc' be in the same edge ring as 'avc'.
- vbc.shver = avc.shver;
- setsorg(vbc, newpoint); // Set 'vbc'.
- setsdest(vbc, pb);
- setsapex(vbc, sapex(avc));
- if (b->quality) {
- // Copy yhr area bound into the new subfaces.
- setareabound(vbc, areabound(avc));
- }
- // Copy the shell marker and shell type into the new subface.
- setshellmark(vbc, shellmark(avc));
- setshelltype(vbc, shelltype(avc));
- // Set the connection between updated and new subfaces.
- senext2self(vbc);
- sbond(vbc, oldbc);
- // Set the connection between new subface and casings.
- senext2self(vbc);
- if (bc.sh != dummysh) {
- if (bccasout.sh != dummysh) {
- // Insert 'vbc' into face link.
- sbond1(bccasin, vbc);
- sbond1(vbc, bccasout);
- } else {
- // Bond 'vbc' to itself.
- sbond(vbc, vbc);
- }
- ssbond(vbc, bc);
- } else {
- sbond(vbc, bccasout);
- }
- // Go to next subface at edge ab.
- spivotself(spinabc);
- if (spinabc.sh == dummysh) {
- break; // 'ab' is a hull edge.
- }
- } while (spinabc.sh != startabc.sh);
-
- // Get the new subface vbc above the updated subface avc (= startabc).
- senext(startabc, oldbc);
- spivot(oldbc, vbc);
- if (sorg(vbc) == newpoint) {
- sesymself(vbc);
- }
- assert(sorg(vbc) == sdest(oldbc) && sdest(vbc) == sorg(oldbc));
- senextself(vbc);
- // Set the face link for the new created subfaces around edge vb.
- spinabc = startabc;
- do {
- // Go to the next subface at edge av.
- spivotself(spinabc);
- if (spinabc.sh == dummysh) {
- break; // 'ab' is a hull edge.
- }
- if (sorg(spinabc) != pa) {
- sesymself(spinabc);
- }
- // Get the new subface vbc1 above the updated subface avc (= spinabc).
- senext(spinabc, oldbc);
- spivot(oldbc, vbc1);
- if (sorg(vbc1) == newpoint) {
- sesymself(vbc1);
- }
- assert(sorg(vbc1) == sdest(oldbc) && sdest(vbc1) == sorg(oldbc));
- senextself(vbc1);
- // Set the connection: vbc->vbc1.
- sbond1(vbc, vbc1);
- // For the next connection.
- vbc = vbc1;
- } while (spinabc.sh != startabc.sh);
-
- // Split ab if it is a subsegment.
- if (ab.sh != dummysh) {
- // Update subsegment ab to av.
- av = ab;
- setsdest(av, newpoint);
- // Create a new subsegment vb.
- makeshellface(subsegs, &vb);
- setsorg(vb, newpoint);
- setsdest(vb, pb);
- // vb gets the same mark and segment type as av.
- setshellmark(vb, shellmark(av));
- setshelltype(vb, shelltype(av));
- // Save the old connection at ab (re-use the handles oldbc, bccasout).
- senext(av, oldbc);
- spivot(oldbc, bccasout);
- // Bond av and vb (bonded at their "fake" edges).
- senext2(vb, bccasin);
- sbond(bccasin, oldbc);
- if (bccasout.sh != dummysh) {
- // There is a subsegment connecting with ab at b. It will connect
- // to vb at b after splitting.
- bccasout.shver = 0;
- assert(sorg(bccasout) == pb);
- senext2self(bccasout);
- senext(vb, bccasin);
- sbond(bccasin, bccasout);
- }
- // Bond all new subfaces (vbc) to vb.
- spinabc = startabc;
- do {
- // Adjust spinabc be edge av.
- if (sorg(spinabc) != pa) {
- sesymself(spinabc);
- }
- // Get new subface vbc above the updated subface avc (= spinabc).
- senext(spinabc, oldbc);
- spivot(oldbc, vbc);
- if (sorg(vbc) == newpoint) {
- sesymself(vbc);
- }
- senextself(vbc);
- // Bond the new subface and the new subsegment.
- ssbond(vbc, vb);
- // Go to the next.
- spivotself(spinabc);
- assert(spinabc.sh != dummysh);
- } while (spinabc.sh != startabc.sh);
- }
-
- // Bond the new subfaces to new tetrahedra if they exist. New tetrahedra
- // should have been created before calling this routine.
- spinabc = startabc;
- do {
- // Adjust spinabc be edge av.
- if (sorg(spinabc) != pa) {
- sesymself(spinabc);
- }
- // Get new subface vbc above the updated subface avc (= spinabc).
- senext(spinabc, oldbc);
- spivot(oldbc, vbc);
- if (sorg(vbc) == newpoint) {
- sesymself(vbc);
- }
- senextself(vbc);
- // Get the adjacent tetrahedra at 'spinabc'.
- stpivot(spinabc, abcd);
- if (abcd.tet != dummytet) {
- findedge(&abcd, sorg(spinabc), sdest(spinabc));
- enextfnext(abcd, vbcd);
- fnextself(vbcd);
- assert(vbcd.tet != dummytet);
- tsbond(vbcd, vbc);
- sym(vbcd, bvce);
- sesymself(vbc);
- tsbond(bvce, vbc);
- } else {
- // One side is empty, check the other side.
- sesymself(spinabc);
- stpivot(spinabc, bace);
- if (bace.tet != dummytet) {
- findedge(&bace, sorg(spinabc), sdest(spinabc));
- enext2fnext(bace, bvce);
- fnextself(bvce);
- assert(bvce.tet != dummytet);
- sesymself(vbc);
- tsbond(bvce, vbc);
- }
- }
- // Go to the next.
- spivotself(spinabc);
- if (spinabc.sh == dummysh) {
- break; // 'ab' is a hull edge.
- }
- } while (spinabc.sh != startabc.sh);
-
- if (b->verbose > 3) {
- spinabc = startabc;
- do {
- // Adjust spinabc be edge av.
- if (sorg(spinabc) != pa) {
- sesymself(spinabc);
- }
- printf(" Updating abc:\n");
- printsh(&spinabc);
- // Get new subface vbc above the updated subface avc (= spinabc).
- senext(spinabc, oldbc);
- spivot(oldbc, vbc);
- if (sorg(vbc) == newpoint) {
- sesymself(vbc);
- }
- senextself(vbc);
- printf(" Creating vbc:\n");
- printsh(&vbc);
- // Go to the next.
- spivotself(spinabc);
- if (spinabc.sh == dummysh) {
- break; // 'ab' is a hull edge.
- }
- } while (spinabc.sh != startabc.sh);
- }
-
- if (flipqueue != (queue *) NULL) {
- spinabc = startabc;
- do {
- // Adjust spinabc be edge av.
- if (sorg(spinabc) != pa) {
- sesymself(spinabc);
- }
- senext2(spinabc, oldbc); // Re-use oldbc.
- enqueueflipedge(oldbc, flipqueue);
- // Get new subface vbc above the updated subface avc (= spinabc).
- senext(spinabc, oldbc);
- spivot(oldbc, vbc);
- if (sorg(vbc) == newpoint) {
- sesymself(vbc);
- }
- senextself(vbc);
- senext(vbc, oldbc); // Re-use oldbc.
- enqueueflipedge(oldbc, flipqueue);
- // Go to the next.
- spivotself(spinabc);
- if (spinabc.sh == dummysh) {
- break; // 'ab' is a hull edge.
- }
- } while (spinabc.sh != startabc.sh);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// unsplitsubedge() Reverse the operation of splitting an edge of subface,//
-// so as to remove a point from the edge. //
-// //
-// Assume the original edge is ab, the subface containing it is abc. It was //
-// split by a point v into avc, and vbc. 'splitsh' represents avc, further- //
-// more, if av is a subsegment, av should be the zero version of the split //
-// subsegment (i.e., av.shver = 0), so we are sure that the destination (v) //
-// of both avc and av is the deleting point. //
-// //
-// To remove point v is to expand avc to abc, delete vbc, do the same for //
-// other subfaces containing av and vb. If av and vb are subsegments, expand //
-// av to ab, delete vb. On completion, point v is not deleted. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::unsplitsubedge(face* splitsh)
-{
- face startavc, spinavc, spinbcv;
- face oldvc, bccasin, bccasout, spinsh;
- face av, vb, bc;
- point pa, pv, pb;
-
- startavc = *splitsh;
- sspivot(startavc, av);
- if (av.sh != dummysh) {
- // Orient the direction of subsegment to conform the subface.
- if (sorg(av) != sorg(startavc)) {
- sesymself(av);
- }
- assert(av.shver == 0);
- }
- senext(startavc, oldvc);
- spivot(oldvc, vb); // vb is subface vbc
- if (sorg(vb) != sdest(oldvc)) {
- sesymself(vb);
- }
- senextself(vb);
- pa = sorg(startavc);
- pv = sdest(startavc);
- pb = sdest(vb);
-
- if (b->verbose > 1) {
- printf(" Removing point %d from subedge (%d, %d).\n",
- pointmark(pv), pointmark(pa), pointmark(pb));
- }
-
- // Spin arround av, unsplit every subface containing av.
- spinavc = startavc;
- do {
- // Adjust spinavc be edge av.
- if (sorg(spinavc) != pa) {
- sesymself(spinavc);
- }
- // Save old configuration at edge bc, if bc has a subsegment, save the
- // face link of it.
- senext(spinavc, oldvc);
- spivot(oldvc, spinbcv);
- if (sorg(spinbcv) != sdest(oldvc)) {
- sesymself(spinbcv);
- }
- senext2self(spinbcv);
- spivot(spinbcv, bccasout);
- sspivot(spinbcv, bc);
- if (bc.sh != dummysh) {
- if (spinbcv.sh != bccasout.sh) {
- // 'spinbcv' is not self-bonded.
- spinsh = bccasout;
- do {
- bccasin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != spinbcv.sh);
- } else {
- bccasout.sh = dummysh;
- }
- }
- // Expand avc to abc.
- setsdest(spinavc, pb);
- if (bc.sh != dummysh) {
- if (bccasout.sh != dummysh) {
- sbond1(bccasin, oldvc);
- sbond1(oldvc, bccasout);
- } else {
- // Bond 'oldbc' to itself.
- sbond(oldvc, oldvc);
- }
- ssbond(oldvc, bc);
- } else {
- sbond(oldvc, bccasout);
- }
- // Delete bcv.
- shellfacedealloc(subfaces, spinbcv.sh);
- // Go to next subface at edge av.
- spivotself(spinavc);
- if (spinavc.sh == dummysh) {
- break; // 'av' is a hull edge.
- }
- } while (spinavc.sh != startavc.sh);
-
- // Is there a subsegment need to be unsplit?
- if (av.sh != dummysh) {
- senext(av, oldvc); // Re-use oldvc.
- spivot(oldvc, vb);
- vb.shver = 0;
- assert(sdest(av) == sorg(vb));
- senext(vb, spinbcv); // Re-use spinbcv.
- spivot(spinbcv, bccasout);
- // Expand av to ab.
- setsdest(av, pb);
- sbond(oldvc, bccasout);
- // Delete vb.
- shellfacedealloc(subsegs, vb.sh);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insertsite() Insert a point into the mesh. //
-// //
-// The 'newpoint' is located. If 'searchtet->tet' is not NULL, the search //
-// for the containing tetrahedron begins from 'searchtet', otherwise, a full //
-// point location procedure is called. If 'newpoint' is found inside a //
-// tetrahedron, the tetrahedron is split into four (by splittetrahedron()); //
-// if 'newpoint' lies on a face, the face is split into three, thereby //
-// splitting the two adjacent tetrahedra into six (by splittetface()); if //
-// 'newpoint' lies on an edge, the edge is split into two, thereby, every //
-// tetrahedron containing this edge is split into two. If 'newpoint' lies on //
-// an existing vertex, no action is taken, and the value DUPLICATEPOINT is //
-// returned and 'searchtet' is set to a handle whose origin is the vertex. //
-// //
-// If 'flipqueue' is not NULL, after 'newpoint' is inserted, it returns all //
-// faces which may become non-Delaunay due to the newly inserted point. Flip //
-// operations can be performed as necessary on them to maintain the Delaunay //
-// property. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::insertsiteresult tetgenmesh::
-insertsite(point newpoint, triface* searchtet, bool approx, queue* flipqueue)
-{
- enum locateresult intersect, exactloc;
- point checkpt;
- REAL epspp, checklen;
- int count;
-
- if (b->verbose > 1) {
- printf(" Insert point to mesh: (%.12g, %.12g, %.12g) %d.\n",
- newpoint[0], newpoint[1], newpoint[2], pointmark(newpoint));
- }
-
- if (searchtet->tet == (tetrahedron *) NULL) {
- // Search for a tetrahedron containing 'newpoint'.
- searchtet->tet = dummytet;
- exactloc = locate(newpoint, searchtet);
- } else {
- // Start searching from the tetrahedron provided by the caller.
- exactloc = preciselocate(newpoint, searchtet);
- }
- intersect = exactloc;
- if (approx && (exactloc != ONVERTEX)) {
- // Adjust the exact location to an approx. location wrt. epsilon.
- epspp = b->epsilon;
- count = 0;
- while (count < 16) {
- intersect = adjustlocate(newpoint, searchtet, exactloc, epspp);
- if (intersect == ONVERTEX) {
- checkpt = org(*searchtet);
- checklen = distance(checkpt, newpoint);
- if (checklen / longest > b->epsilon) {
- epspp *= 1e-2;
- count++;
- continue;
- }
- }
- break;
- }
- }
- // Keep current search state for next searching.
- recenttet = *searchtet;
-
- // Insert the point using the right routine
- switch (intersect) {
- case ONVERTEX:
- // There's already a vertex there. Return in 'searchtet' a tetrahedron
- // whose origin is the existing vertex.
- if (b->verbose > 1) {
- printf(" Not insert for duplicating point.\n");
- }
- return DUPLICATEPOINT;
-
- case OUTSIDE:
- if (b->verbose > 1) {
- printf(" Not insert for locating outside the mesh.\n");
- }
- return OUTSIDEPOINT;
-
- case ONEDGE:
- // 'newpoint' falls on an edge.
- splittetedge(newpoint, searchtet, flipqueue);
- return SUCCESSONEDGE;
-
- case ONFACE:
- // 'newpoint' falls on a face.
- splittetface(newpoint, searchtet, flipqueue);
- return SUCCESSONFACE;
-
- case INTETRAHEDRON:
- // 'newpoint' falls inside a tetrahedron.
- splittetrahedron(newpoint, searchtet, flipqueue);
- return SUCCESSINTET;
- }
-
- // Impossible case.
- assert(0);
- return OUTSIDEPOINT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// undosite() Undo the most recently point insertion. //
-// //
-// 'insresult' indicates in where the newpoint has been inserted, i.e., in a //
-// tetrahedron, on a face, or on an edge. A correspoding routine will be //
-// called to undo the point insertion. 'splittet' is a handle represent one //
-// of the resulting tetrahedra, but it may be changed after transformation, //
-// even may be dead. Four points 'torg', ... 'toppo' are the corners which //
-// 'splittet' should have. On finish, 'newpoint' is not removed. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-undosite(enum insertsiteresult insresult, triface* splittet, point torg,
- point tdest, point tapex, point toppo)
-{
- // Set the four corners of 'splittet' exactly be 'torg', ... 'toppo'.
- findface(splittet, torg, tdest, tapex);
- if (oppo(*splittet) != toppo) {
- symself(*splittet);
- assert(oppo(*splittet) == toppo);
- // The sym() operation may inverse the edge, correct it if so.
- findedge(splittet, torg, tdest);
- }
-
- // Unsplit the tetrahedron according to 'insresult'.
- switch (insresult) {
- case SUCCESSINTET:
- // 'splittet' should be the face with 'newpoint' as its opposite.
- unsplittetrahedron(splittet);
- break;
- case SUCCESSONFACE:
- // 'splittet' should be the one of three splitted face with 'newpoint'
- // as its apex.
- unsplittetface(splittet);
- break;
- case SUCCESSONEDGE:
- // 'splittet' should be the tet with destination is 'newpoint'.
- unsplittetedge(splittet);
- break;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// inserthullsite() Insert a point which is outside the convex hull. //
-// //
-// The inserting point 'inspoint' lies outside the tetrahedralization.'horiz'//
-// is one of the convex hull faces which are visible from it. (You can image //
-// that is is parallel to the horizon). To insert a point outside the convex //
-// hull we have to enlarge current convex hull of the tetrahedralization for //
-// including this point. This routine collects convex hull faces which are //
-// visible from the inserting point, constructs new tetrahedra from these //
-// faces and the inserting point. On return, 'inspoint' has become a vertex //
-// of the augmented tetrahedralization. The convex hull has been updated. //
-// 'flipcheckqueue' returns the old convex hull faces which may become non- //
-// Delaunay and need be flipped. //
-// //
-// The caller can optionally provide two variables. 'hulllink' is a link for //
-// saving newly created hull faces (containing 'inspoint') which may not //
-// convex. Non-convex hull faces will be detected and finished by mounting //
-// new tetrahedra with other hull vertex near them. 'worklist' is an array, //
-// used for face matching. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-inserthullsite(point inspoint, triface* horiz, queue* flipqueue,
- link* hulllink, int* worklist)
-{
- link *myhulllink;
- triface newtet, hullface;
- triface oldhull, newhull;
- point workpt[3];
- bool finished;
- int *myworklist;
- int idx, share;
- int i, j, k;
-
- if (b->verbose > 1) {
- printf(" Collect visible convex hull faces.\n");
- }
-
- // Check if the 'hulllink' is provided by the caller.
- if (hulllink != (link *) NULL) {
- myhulllink = (link *) NULL;
- } else {
- myhulllink = new link(sizeof(triface), NULL, 256);
- hulllink = myhulllink;
- }
-
- // Check if the 'worklist' is provided by the caller.
- if (worklist != (int *) NULL) {
- myworklist = (int *) NULL;
- } else {
- myworklist = new int[in->numberofpoints];
- for (i = 0; i < in->numberofpoints; i++) {
- myworklist[i] = 0;
- }
- worklist = myworklist;
- }
-
- adjustedgering(*horiz, CW);
- // Create a new tetrahedron from 'horiz' and 'inspoint'.
- maketetrahedron(&newtet);
- setorg (newtet, org(*horiz));
- setdest(newtet, dest(*horiz));
- setapex(newtet, apex(*horiz));
- setoppo(newtet, inspoint);
- // Make the connection of two tets.
- bond(newtet, *horiz);
- // 'horiz' becomes interior face.
- enqueueflipface(*horiz, flipqueue);
- // Add the three sides of 'newtet' to 'hulllink'.
- fnext(newtet, hullface);
- hulllink->add(&hullface);
- enextfnext(newtet, hullface);
- hulllink->add(&hullface);
- enext2fnext(newtet, hullface);
- hulllink->add(&hullface);
- if (b->verbose > 3) {
- printf(" Creating newtet ");
- printtet(&newtet);
- }
- // Hull face number decreased caused by face bond() operation.
- hullsize--;
-
- // Loop untill 'hulllink' is empty. Find other visible convex hull faces,
- // create tetrahedra from them and 'inspoint'. Update 'hulllink'.
- while (hulllink->len() > 0) {
- // Remove the top hull face from the link, its apex is 'inspoint'.
- hullface = * (triface *) hulllink->del(1);
- // Get the neighbor convex hull face at the edge of 'hullface'. This is
- // done by rotating faces around the edge from the inside until reach
- // outer space (The rotation of faces should always terminate).
- esym(hullface, oldhull);
- while (fnextself(oldhull)) ;
- // Is 'inspoint' visible from 'oldhull'?
- if (orient3d(org(oldhull), dest(oldhull), apex(oldhull), inspoint) < 0.0) {
- // 'oldhull' is visible from 'inspoint'. Create a new tetrahedron
- // from them.
- maketetrahedron(&newtet);
- setorg(newtet, org(oldhull));
- setdest(newtet, dest(oldhull));
- setapex(newtet, apex(oldhull));
- setoppo(newtet, inspoint);
- // Bond 'newtet' to 'oldhull'.
- bond(newtet, oldhull);
- // Hull face number decrease caused by bond().
- hullsize--;
- // Bond 'newtet' to 'hullface'.
- fnext(newtet, newhull);
- bond(newhull, hullface);
- // 'oldhull' becomes interior face.
- enqueueflipface(oldhull, flipqueue);
- // Check other two sides of 'newtet'. If one exists in 'hulllink'.
- // remove the one in 'hulllink' (it is finished), otherwise, it
- // becomes a new hull face, add it into 'hulllink'.
- for (i = 0; i < 2; i++) {
- // Get 'newhull' and set flags for its vertices.
- if (i == 0) {
- enextfnext(newtet, newhull);
- } else {
- enext2fnext(newtet, newhull);
- }
- workpt[0] = org(newhull);
- workpt[1] = dest(newhull);
- workpt[2] = apex(newhull);
- for (k = 0; k < 3; k++) {
- idx = pointmark(workpt[k]) - in->firstnumber;
- worklist[idx] = 1;
- }
- // Search 'newhull' in 'hulllink'.
- finished = false;
- for (j = 0; j < hulllink->len() && !finished; j++) {
- hullface = * (triface *) hulllink->getnitem(j + 1);
- workpt[0] = org(hullface);
- workpt[1] = dest(hullface);
- workpt[2] = apex(hullface);
- share = 0;
- for (k = 0; k < 3; k++) {
- idx = pointmark(workpt[k]) - in->firstnumber;
- if (worklist[idx] == 1) {
- share++;
- }
- }
- if (share == 3) {
- // Two faces are identical. Bond them togther.
- bond(newhull, hullface);
- // Remove 'hullface' from the link.
- hulllink->del(j + 1);
- finished = true;
- }
- }
- if (!finished) {
- // 'newhull' becomes a hull face, add it into 'hulllink'.
- hulllink->add(&newhull);
- }
- // Clear used flags.
- workpt[0] = org(newhull);
- workpt[1] = dest(newhull);
- workpt[2] = apex(newhull);
- for (k = 0; k < 3; k++) {
- idx = pointmark(workpt[k]) - in->firstnumber;
- worklist[idx] = 0;
- }
- }
- } else {
- // 'hullface' becomes a convex hull face.
- hullsize++;
- // Let 'dummytet[0]' points to it for next point location.
- dummytet[0] = encode(hullface);
- }
- }
-
- if (myhulllink != (link *) NULL) {
- delete myhulllink;
- }
- if (myworklist != (int *) NULL) {
- delete [] myworklist;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// collectcavtets() Collect all tetrahedra whose circumsphere conatining //
-// the given point. //
-// //
-// This routine first locates the newpoint. Note the mesh may not be convex, //
-// the locate() function may not find it. However, if we start from a very //
-// close neighborhood, the function preciselocate() can be used. Here we //
-// assume "recenttet" suggests such a starting point. 'cavtetlist' is a list //
-// returns the tetrahedra. It is empty on input. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::collectcavtets(point newpoint, list* cavtetlist)
-{
- triface starttet, neightet;
- enum locateresult loc;
- REAL sign;
- int i, j;
-
- // First locate the newpoint. 'recenttet' suggests the starting point.
- starttet = recenttet;
- loc = preciselocate(newpoint, &starttet);
- if (loc == OUTSIDE) {
- // Principlly, the newpoint should lie inside or on the hull. But it
- // may happen practically when the newpoint is just slightly lies
- // outside the hull due to the rounding error.
- loc = ONFACE; // This line is no meaning.
- }
-
- // Now starttet contains newpoint.
- infect(starttet);
- cavtetlist->append(&starttet);
- // Check the adjacent tet.
- sym(starttet, neightet);
- if (neightet.tet != dummytet) {
- // For positive orientation that insphere() test requires.
- adjustedgering(neightet, CW);
- sign = insphere(org(neightet), dest(neightet), apex(neightet),
- oppo(neightet), newpoint);
- if (sign >= 0.0) {
- // Add neightet into list.
- infect(neightet);
- cavtetlist->append(&neightet);
- }
- }
-
- // Find the other tetrahedra by looping in list.
- for (i = 0; i < cavtetlist->len(); i++) {
- starttet = * (triface *)(* cavtetlist)[i];
- // Check the other three neighbors of starttet.
- adjustedgering(starttet, CCW);
- for (j = 0; j < 3; j++) {
- fnext(starttet, neightet);
- symself(neightet);
- if ((neightet.tet != dummytet) && !infected(neightet)) {
- // For positive orientation that insphere() test requires.
- adjustedgering(neightet, CW);
- sign = insphere(org(neightet), dest(neightet), apex(neightet),
- oppo(neightet), newpoint);
- if (sign >= 0.0) {
- // Add neightet into list.
- infect(neightet);
- cavtetlist->append(&neightet);
- }
- }
- enextself(starttet);
- }
- }
-
- // Having find all tetrahedra, uninfect them before return.
- for (i = 0; i < cavtetlist->len(); i++) {
- starttet = * (triface *)(* cavtetlist)[i];
- assert(infected(starttet));
- uninfect(starttet);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// removetetbypeeloff() Remove a boundary tetrahedron by peeling off it //
-// from the mesh. //
-// //
-// 'badtet' (abcd) is a boundary tetrahedron and going to be peeled off. abc //
-// and bad are the outer boundary faces. To remove 'abcd' from the mesh is //
-// simply detach its two inner faces (dca and cdb) from the adjoining tets. //
-// A 2-to-2 flip is applied to transform subfaces abc and bad to dca and cdb.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::removetetbypeeloff(triface *badtet, queue* flipqueue)
-{
- triface abcd, badc;
- triface dcacasing, cdbcasing;
- face abc, bad;
-
- if (b->verbose > 1) {
- printf(" by peeling off it from boundary.\n");
- }
-
- abcd = *badtet;
- adjustedgering(abcd, CCW);
- // Get subfaces abc, bad.
- fnext(abcd, badc);
- esymself(badc);
- tspivot(abcd, abc);
- tspivot(badc, bad);
- assert(abc.sh != dummysh && bad.sh != dummysh);
- findedge(&abc, org(abcd), dest(abcd));
- findedge(&bad, org(badc), dest(badc));
- // Get the casing tets at the two inner sides of 'badtet'.
- enextfnext(abcd, cdbcasing);
- enext2fnext(abcd, dcacasing);
- symself(cdbcasing);
- symself(dcacasing);
- assert(cdbcasing.tet != dummytet && dcacasing.tet != dummytet);
-
- // Do a 2-to-2 flip on abc and bad, transform abc->dca, bad->cdb.
- flip22sub(&abc, NULL);
- // Detach abcd from its inner sides.
- dissolve(cdbcasing);
- dissolve(dcacasing);
- // Make its inner sides be boundary.
- tsbond(cdbcasing, bad);
- tsbond(dcacasing, abc);
- // Delete abcd.
- tetrahedrondealloc(abcd.tet);
-
- if (flipqueue != (queue *) NULL) {
- // Edge cd maybe non-Delaunay.
- adjustedgering(cdbcasing, CCW);
- fnextself(cdbcasing);
- enqueueflipface(cdbcasing, flipqueue);
- adjustedgering(dcacasing, CCW);
- fnextself(dcacasing);
- enqueueflipface(dcacasing, flipqueue);
- // Do flipping.
- flip(flipqueue, NULL);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// removetetbyflip32() Remove a tetrahedron by doing a 3-to-2 flip. //
-// //
-// 'badtet' (abcd) is the bad tetrahedron which is going to be removed by a //
-// 3-to-2 flip. abc represents one of the internal faces, bad is another. //
-// If abc and bad are subfaces, a 2-to-2 flip is performed to transform abc, //
-// bad into dca, cdb, before the 3-to-2 flip is applying. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::removetetbyflip32(triface *badtet, queue* flipqueue)
-{
- triface abcd, badc;
- triface cdab, dcba;
- triface baccasing, abdcasing;
- triface dcacasing, cdbcasing;
- face abc, bad;
-
- if (b->verbose > 1) {
- printf(" by doing a 3-to-2 flip.\n");
- }
-
- abcd = *badtet;
- adjustedgering(abcd, CCW);
- fnext(abcd, badc);
- esymself(badc);
- sym(abcd, baccasing);
- sym(badc, abdcasing);
- assert(baccasing.tet != dummytet && abdcasing.tet != dummytet);
- assert(oppo(baccasing) == oppo(abdcasing));
-
- // Get subfaces abc, bad.
- tspivot(abcd, abc);
- tspivot(badc, bad);
- if (abc.sh != dummysh) {
- // Because ab should not be a subsegment.
- assert(bad.sh != dummysh);
- findedge(&abc, org(abcd), dest(abcd));
- findedge(&bad, org(badc), dest(badc));
- // Detach abc, bad from tetrahedra at both sides.
- stdissolve(abc);
- stdissolve(bad);
- sesymself(abc);
- sesymself(bad);
- stdissolve(abc);
- stdissolve(bad);
- sesymself(abc);
- sesymself(bad);
- // Detach tetrahedra witch hold abc and bad.
- tsdissolve(abcd);
- tsdissolve(badc);
- tsdissolve(baccasing);
- tsdissolve(abdcasing);
- // Perform a 2-to-2 flip on abc, bad, transform abc->dca, bad->cdb.
- flip22sub(&abc, NULL);
- // Insert the flipped subfaces abc and bad into tetrahedra.
- enextfnext(abcd, dcba); // dcba = bcda
- esymself(dcba); // dcba = cbda
- enext2fnext(abcd, cdab); // cdab = cadb
- esymself(cdab); // cdab = acdb
- findedge(&abc, org(cdab), dest(cdab));
- tsbond(cdab, abc);
- findedge(&bad, org(dcba), dest(dcba));
- tsbond(dcba, bad);
- // Bond the other sides of cdab, dcba, they may outer space.
- sym(cdab, dcacasing);
- sym(dcba, cdbcasing);
- sesymself(abc);
- sesymself(bad);
- tsbond(dcacasing, abc);
- tsbond(cdbcasing, bad);
- }
- // Do a 3-to-2 flip on face abc to remove tetrahedron abcd.
- flip32(&abcd, flipqueue);
- // Do flipping if necessary.
- if (flipqueue != (queue *) NULL) {
- flip(flipqueue, NULL);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// removetetbycflips() Remove a tetrahedron by a combination of flips. //
-// //
-// 'badtet' (abcd) is the tetrahedron which is going to be removed. It can't //
-// be removed simply by a 3-to-2 flip. //
-// //
-// A flipstack is used for remembering flips have done, in case falure, we //
-// can restore the original state. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::removetetbycflips(triface *badtet, queue* flipqueue)
-{
- triface abcd;
- triface bacd, baec;
- triface abdc, abfd;
- flipstacker *lastflip, *newflip;
- enum fliptype fc;
- int flipcount;
-
- abcd = *badtet;
- adjustedgering(abcd, CCW);
- esym(abcd, bacd);
- if (issymexist(&bacd)) {
- fnext(bacd, baec);
- assert(baec.tet != dummytet);
- } else {
- // This side is empty. But the tet can not be peeled off.
- return false;
- }
- fnext(abcd, abdc);
- if (issymexist(&abdc)) {
- fnext(abdc, abfd);
- assert(abfd.tet != dummytet);
- } else {
- // This side is empty. But the tet can not be peeled off.
- return false;
- }
- assert(apex(baec) != apex(abfd));
-
- if (b->verbose > 1) {
- printf(" by doing a combination of flips.\n");
- }
-
- // Initialize the stack of the flip sequence.
- flipstackers->restart();
- lastflip = (flipstacker *) NULL;
-
- // Flip faces above abc.
- flipcount = 0;
- do {
- assert(baec.tet != dummytet);
- fc = categorizeface(baec);
- if (fc == T23) {
- flip23(&baec, NULL);
- } else if (fc == T22 || fc == T44) {
- flip22(&baec, NULL);
- }
- if (fc == T23 || fc == T22 || fc == T44) {
- // Push the flipped face into stack.
- newflip = (flipstacker *) flipstackers->alloc();
- newflip->flippedface = baec;
- newflip->fc = fc;
- newflip->forg = org(baec);
- newflip->fdest = dest(baec);
- newflip->fapex = apex(baec);
- newflip->prevflip = lastflip;
- lastflip = newflip;
- // Check the flipped side.
- fnext(bacd, baec);
- if (apex(baec) == apex(abfd)) {
- // We have made 'abcd' flipable.
- removetetbyflip32(&abcd, flipqueue);
- return true;
- }
- flipcount++;
- } else {
- // Face is unflipable, break the loop.
- break;
- }
- } while (flipcount < 16);
-
- // Flip faces above bad.
- fnext(bacd, baec);
- assert(apex(abfd) != apex(baec));
- flipcount = 0;
- do {
- assert(abfd.tet != dummytet);
- fc = categorizeface(abfd);
- if (fc == T23) {
- flip23(&abfd, NULL);
- } else if (fc == T22 || fc == T44) {
- flip22(&abfd, NULL);
- }
- if (fc == T23 || fc == T22 || fc == T44) {
- // Push the flipped face into stack.
- newflip = (flipstacker *) flipstackers->alloc();
- newflip->flippedface = abfd;
- newflip->fc = fc;
- newflip->forg = org(abfd);
- newflip->fdest = dest(abfd);
- newflip->fapex = apex(abfd);
- newflip->prevflip = lastflip;
- lastflip = newflip;
- // Check the flipped side.
- fnext(abdc, abfd);
- if (apex(abfd) == apex(baec)) {
- // We have made 'abcd' flipable.
- removetetbyflip32(&abcd, flipqueue);
- return true;
- }
- flipcount++;
- } else {
- // Face is unflipable, break the loop.
- break;
- }
- } while (flipcount < 16);
-
- // Unable to use a combination of flips.
- if (b->verbose > 1) {
- printf(" Not success.\n");
- }
- // Restore the flips we've done.
- undoflip(lastflip);
- return false;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// removebadtet() Remove a bad tetrahedron from the mesh. //
-// //
-// 'bt' indicates the type of the 'badtet', assume it is abcd. If it is a //
-// SLIVER, ab and cd are the two diagonal edges; if it is a CAP, abc is the //
-// bottom face (the projection of d is inside abc); if it is ILLEGAL, abc, //
-// bad are the two boundary subfaces (which are on the same facet). //
-// //
-// This routine first classifies the type of operation can be used to remove //
-// 'badtet', e.g. simpley do a 3-to-2 flip, or combine several flips. Then //
-// do the corresponding flip operation. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-removebadtet(enum badtettype bt, triface *badtet, queue* flipqueue)
-{
- triface abcd, badc, cdab, dcba;
- triface bcdcasing, cadcasing;
- triface baccasing, abdcasing;
- face ab, cd;
- point pa, pb, pc, pd;
-
- abcd = *badtet;
- adjustedgering(abcd, CCW);
- pa = org(abcd);
- pb = dest(abcd);
- pc = apex(abcd);
- pd = oppo(abcd);
-
- if (b->verbose > 1) {
- printf(" Remove tetrahedron (%d, %d, %d, %d).\n", pointmark(pa),
- pointmark(pb), pointmark(pc), pointmark(pd));
- }
-
- // Get the casing tets at the four sides of 'badtet'.
- fnext(abcd, badc);
- esymself(badc);
- sym(abcd, baccasing);
- sym(badc, abdcasing);
- tsspivot(&abcd, &ab);
- enextfnext(abcd, dcba); // dcba = bcda
- esymself(dcba); // dcba = cbda
- enext2self(dcba);
- enext2fnext(abcd, cdab); // cdab = cadb
- esymself(cdab); // cdab = acdb
- enextself(cdab);
- sym(dcba, bcdcasing);
- sym(cdab, cadcasing);
- tsspivot(&dcba, &cd);
-
- if (ab.sh != dummysh && cd.sh != dummysh) {
- printf("Warning: Two subsegments (%d, %d), (%d, %d) cross in one tet.\n",
- pointmark(pa), pointmark(pb), pointmark(pc), pointmark(pd));
- return false;
- }
-
- if (bt == ILLEGAL || bt == SLIVER) {
- if (cd.sh == dummysh) {
- // Test if edge 'cd' is removeable.
- if (bcdcasing.tet == dummytet && cadcasing.tet == dummytet) {
- removetetbypeeloff(&cdab, flipqueue);
- return true;
- }
- if (oppo(bcdcasing) == oppo(cadcasing)) {
- removetetbyflip32(&cdab, flipqueue);
- return true;
- }
- }
- if (ab.sh == dummysh) {
- // Test if edge 'ab' is removeable.
- if (baccasing.tet == dummytet && abdcasing.tet == dummytet) {
- removetetbypeeloff(&abcd, flipqueue);
- return true;
- }
- if (oppo(baccasing) == oppo(abdcasing)) {
- removetetbyflip32(&abcd, flipqueue);
- return true;
- }
- }
- // 'badtet' can not be easily removed, try to remove it by a combination
- // of flips.
- if (cd.sh == dummysh) {
- if (removetetbycflips(&cdab, flipqueue)) {
- return true;
- }
- }
- if (ab.sh == dummysh) {
- if (removetetbycflips(&abcd, flipqueue)) {
- return true;
- }
- }
- if (b->verbose) {
- printf("Warning: Unable to remove bad tet (%d, %d, %d, %d).\n",
- pointmark(pa), pointmark(pb), pointmark(pc), pointmark(pd));
- }
- return false;
- }
-
- return false;
-}
-
-//
-// End of mesh transformation routines
-//
-
-//
-// Begin of incremental flip Delaunay triangulation routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// incrflipinit() Create an initial tetrahedralization. //
-// //
-// The initial tetrahedralization only contains one tetrahedron formed from //
-// four affinely linear independent vertices from the input point set. //
-// //
-// 'insertqueue' returns the rest of vertices of the input point set. These //
-// vertices will be inserted one by one in the later step. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::incrflipinit(queue* insertqueue)
-{
- triface newtet;
- point *plist, pointloop;
- point pa, pb, pc, pd;
- REAL det;
- int count;
- int i, j;
-
- if (b->verbose > 1) {
- printf(" Constructing an initial tetrahedron.\n");
- }
-
- // Create a point list and initialize it.
- plist = new point[in->numberofpoints];
- i = 0;
- points->traversalinit();
- pointloop = pointtraverse();
- while (pointloop != (point) NULL) {
- plist[i++] = pointloop;
- pointloop = pointtraverse();
- }
- assert(i == in->numberofpoints);
-
- if (b->dopermute) {
- // Do permutation. Initialize the random seed.
- randomseed = b->srandseed;
- for (i = 0; i < in->numberofpoints; i++) {
- // Get a index j (from 0 to in->numberofpoints - i - 1).
- j = (int) randomnation(in->numberofpoints - i);
- // Exchange the i-th point and (j + i)-th point.
- pointloop = plist[j + i];
- plist[j + i] = plist[i];
- plist[i] = pointloop;
- }
- }
-
- // Set the plist into insertqueue.
- if (!insertqueue->empty()) {
- insertqueue->clear();
- }
- for (i = 0; i < in->numberofpoints; i++) {
- pointloop = plist[i];
- insertqueue->push(&pointloop);
- }
- delete [] plist;
-
- // Get the first two point 'pa'.
- pa = * (point *) insertqueue->pop();
-
- // Get the second point 'pb', which is not identical with 'pa'.
- count = 0;
- pb = * (point *) insertqueue->pop();
- while ((pb != (point) NULL) && (count < in->numberofpoints)) {
- if ((pb[0] == pa[0]) && (pb[1] == pa[1]) && (pb[2] == pa[2])) {
- // 'pb' is identical to 'pa', skip it.
- insertqueue->push(&pb);
- } else {
- break;
- }
- pb = * (point *) insertqueue->pop();
- count++;
- }
- if (pb == (point) NULL) {
- printf("\nAll points are identical, no triangulation be constructed.\n");
- exit(1);
- }
-
- // Get the third point 'pc', which is not collinear with 'pa' and 'pb'.
- count = 0;
- pc = * (point *) insertqueue->pop();
- while ((pc != (point) NULL) && (count < in->numberofpoints)) {
- if (iscollinear(pa, pb, pc, (b->epsilon * 1e-2))) {
- // They are collinear or identical, put it back to queue.
- insertqueue->push(&pc);
- } else {
- break;
- }
- pc = * (point *) insertqueue->pop();
- count++;
- }
- if (pc == (point) NULL) {
- printf("\nAll points are collinear, no triangulation be constructed.\n");
- exit(1);
- }
-
- // Get the fourth point which is not coplanar with pa, pb, and pc.
- count = 0;
- pd = * (point *) insertqueue->pop();
- while ((pd != (point) NULL) && (count < in->numberofpoints)) {
- det = orient3d(pa, pb, pc, pd);
- if (det == 0.0) {
- // They are coplanar or identical, put it back to queue.
- insertqueue->push(&pd);
- } else {
- break;
- }
- pd = * (point *) insertqueue->pop();
- count++;
- }
- if (pd == (point) NULL) {
- printf("\nAll points are coplanar, no triangulation be constructed.\n");
- exit(1);
- }
- if (det > 0.0) {
- pointloop = pa; pa = pb; pb = pointloop;
- }
-
- // Create the tetrahedron with corners pa, pb, pc and pd.
- maketetrahedron(&newtet);
- setorg(newtet, pa);
- setdest(newtet, pb);
- setapex(newtet, pc);
- setoppo(newtet, pd);
- // Set the vertices be FREEVOLVERTEX to indicate they belong to the mesh.
- setpointtype(pa, FREEVOLVERTEX);
- setpointtype(pb, FREEVOLVERTEX);
- setpointtype(pc, FREEVOLVERTEX);
- setpointtype(pd, FREEVOLVERTEX);
- // Bond to 'dummytet' for point location.
- dummytet[0] = encode(newtet);
- if (b->verbose > 3) {
- printf(" Creating tetra ");
- printtet(&newtet);
- }
- // At init, all faces of this tet are hull faces.
- hullsize = 4;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// incrflipdelaunay() Construct a delaunay tetrahedrization from a set of //
-// 3D points using the incremental flip algorithm. //
-// //
-// The incremental flip algorithm is described in the paper of Edelsbrunner //
-// and Shah, "Incremental Topological Flipping Works for Regular Triangulat- //
-// ions", Algorithmica 15: 223-241, 1996. It can be described as follows: //
-// //
-// S be a set of points in 3D, Let 4 <= i <= n and assume that the //
-// Delaunay triangulation of the first i-1 points in S is already //
-// constructed; call it D(i-1). Add the i-th point p_i (belong to S) to //
-// the triangulation,and restore Delaunayhood by flipping; this result //
-// in D(i). Repeat this procedure until i = n. //
-// //
-// This strategy always leads to the Ddelaunay triangulation of a point set. //
-// The return value is the number of convex hull faces of this point set. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-long tetgenmesh::incrflipdelaunay()
-{
- triface starttet;
- point pointloop;
- queue *flipqueue;
- queue *insertqueue;
- link *hulllink;
- enum insertsiteresult insres;
- int *worklist, i;
-
- if (!b->quiet) {
- if (!b->noflip) {
- printf("Constructing Delaunay tetrahedrization.\n");
- } else {
- printf("Constructing tetrahedrization.\n");
- }
- }
-
- // Initialize 'flipqueue'.
- flipqueue = new queue(sizeof(badface));
- // Create a queue for all inserting points.
- insertqueue = new queue(sizeof(point*), in->numberofpoints);
- // Create a 'hulllink' used in inserthullsite().
- hulllink = new link(sizeof(triface), NULL, 256);
- // Create and initialize 'worklist' used in inserthullsite().
- worklist = new int[in->numberofpoints];
- for (i = 0; i < in->numberofpoints; i++) worklist[i] = 0;
- // Initialize global counters.
- flip23s = flip32s = flip22s = flip44s = 0;
-
- // Algorithm starts from here.
-
- // Construct an initial tetrahedralization and fill 'insertqueue'.
- incrflipinit(insertqueue);
-
- // Loop untill all points are inserted.
- while (!insertqueue->empty()) {
- pointloop = * (point *) insertqueue->pop();
- // It will become a mesh point unless it duplicates an existing point.
- setpointtype(pointloop, FREEVOLVERTEX);
- // Try to insert the point first.
- starttet.tet = (tetrahedron *) NULL;
- insres = insertsite(pointloop, &starttet, false, flipqueue);
- if (insres == OUTSIDEPOINT) {
- // Point locates outside the convex hull.
- inserthullsite(pointloop, &starttet, flipqueue, hulllink, worklist);
- } else if (insres == DUPLICATEPOINT) {
- if (b->object != tetgenbehavior::STL) {
- if (!b->quiet) {
- printf("Warning: Point %d is identical with point %d.\n",
- pointmark(pointloop), pointmark(org(starttet)));
- }
- // Count the number of duplicated points.
- dupverts++;
- }
- // Remember it is a duplicated point.
- setpointtype(pointloop, DUPLICATEDVERTEX);
- if (b->plc || b->refine) {
- // Set a pointer to the point it duplicates.
- setpoint2pt(pointloop, org(starttet));
- }
- }
- if (!b->noflip) {
- // Call flip algorithm to recover Delaunayness.
- flip(flipqueue, NULL);
- } else {
- // Not perform flip.
- flipqueue->clear();
- }
- }
-
- delete flipqueue;
- delete insertqueue;
- delete hulllink;
- delete [] worklist;
-
- if (!b->noflip && b->verbose) {
- printf(" Total flips: %ld, where T23 %ld, T32 %ld, T22 %ld, T44 %ld\n",
- flip23s + flip32s + flip22s + flip44s,
- flip23s, flip32s, flip22s, flip44s);
- }
-
- return hullsize;
-}
-
-//
-// End of incremental flip Delaunay triangulation routines
-//
-
-//
-// Begin of surface triangulation routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The lift points //
-// //
-// A 'lifting point' of a facet is a point which lies exactly non-coplanar //
-// with the plane containing that facet. With such an additional point, the //
-// three-dimensional geometric predicates (orient3d, insphere) can be used //
-// to substitute the lower dimensional predicates (orient2d, incircle). The //
-// advantage is there is no need to project 3D points back into 2D, so the //
-// rounding error can be avoid. //
-// //
-// These points are calculated during the initialization of triangulating //
-// the facets. It is important to orient subfaces of the same facet to have //
-// the same orientation with respect to its lift point. This way guarantees //
-// the test results are consistent. We take the convention that the lift //
-// point of a facet always lies above the CCW edge rings of subfaces of the //
-// same facet. By this convention, given three points a, b, and c in a facet,//
-// we say c has the counterclockwise order with ab is corresponding to say //
-// that c is below the plane abp, where p is the lift point. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// locatesub() Find a point in the surface mesh. //
-// //
-// Searching begins from the input 'searchsh', it should be a handle on the //
-// convex hull of the facet triangulation. //
-// //
-// On completion, 'searchsh' is a subface that contains 'searchpoint'. //
-// - Returns ONVERTEX if the point lies on an existing vertex. 'searchsh' //
-// is a handle whose origin is the existing vertex. //
-// - Returns ONEDGE if the point lies on a mesh edge. 'searchsh' is a //
-// handle whose primary edge is the edge on which the point lies. //
-// - Returns ONFACE if the point lies strictly within a subface. //
-// 'searchsh' is a handle on which the point lies. //
-// - Returns OUTSIDE if the point lies outside the triangulation. //
-// //
-// WARNING: This routine is designed for convex triangulations, and will not //
-// not generally work after the holes and concavities have been carved. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::locateresult tetgenmesh::
-locatesub(point searchpt, face* searchsh, point abovept)
-{
- face backtracksh, checkedge;
- point forg, fdest, fapex, liftpoint;
- REAL orgori, destori;
- int moveleft, i;
-
- if (searchsh->sh == dummysh) {
- searchsh->shver = 0;
- spivotself(*searchsh);
- assert(searchsh->sh != dummysh);
- }
-
- // Set the liftpoint. (Note, the liftpoint is always above the face.)
- if (abovept == (point) NULL) {
- liftpoint = getliftpoint(shellmark(*searchsh));
- adjustedgering(*searchsh, CCW);
- } else {
- liftpoint = abovept;
- forg = sorg(*searchsh);
- fdest = sdest(*searchsh);
- fapex = sapex(*searchsh);
- orgori = orient3d(forg, fdest, fapex, liftpoint);
- assert(orgori != 0.0);
- if (orgori > 0.0) {
- sesymself(*searchsh);
- }
- }
-
- // Orient 'searchsh' so that 'searchpt' is below it (i.e., searchpt has
- // CCW orientation with respect to searchsh in plane). Such edge
- // should always exist. Save it as (forg, fdest).
- for (i = 0; i < 3; i++) {
- forg = sorg(*searchsh);
- fdest = sdest(*searchsh);
- if (orient3d(forg, fdest, liftpoint, searchpt) > 0.0) break;
- senextself(*searchsh);
- }
- assert(i < 3);
-
- while (1) {
- fapex = sapex(*searchsh);
- // Check whether the apex is the point we seek.
- if (fapex[0] == searchpt[0] && fapex[1] == searchpt[1] &&
- fapex[2] == searchpt[2]) {
- senext2self(*searchsh);
- return ONVERTEX;
- }
- // Does the point lie on the other side of the line defined by the
- // triangle edge opposite the triangle's destination?
- destori = orient3d(forg, fapex, liftpoint, searchpt);
- // Does the point lie on the other side of the line defined by the
- // triangle edge opposite the triangle's origin?
- orgori = orient3d(fapex, fdest, liftpoint, searchpt);
- if (destori > 0.0) {
- moveleft = 1;
- } else {
- if (orgori > 0.0) {
- moveleft = 0;
- } else {
- // The point must be on the boundary of or inside this triangle.
- if (destori == 0.0) {
- senext2self(*searchsh);
- return ONEDGE;
- }
- if (orgori == 0.0) {
- senextself(*searchsh);
- return ONEDGE;
- }
- return ONFACE;
- }
- }
- // Move to another triangle. Leave a trace `backtracksh' in case
- // walking off a boundary of the triangulation.
- if (moveleft) {
- senext2(*searchsh, backtracksh);
- fdest = fapex;
- } else {
- senext(*searchsh, backtracksh);
- forg = fapex;
- }
- spivot(backtracksh, *searchsh);
- // Check for walking right out of the triangulation.
- if (searchsh->sh == dummysh) {
- // Go back to the last triangle.
- *searchsh = backtracksh;
- return OUTSIDE;
- }
- // To keep the same orientation wrt. liftpoint.
- // adjustedgering(*searchsh, CCW);
- if (sorg(*searchsh) != forg) {
- sesymself(*searchsh);
- }
- assert((sorg(*searchsh) == forg) && (sdest(*searchsh) == fdest));
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// flipsub() Flip all non-Delaunay edges in a given queue of subfaces. //
-// //
-// Assumpation: Current triangulation is non-Delaunay after inserting a //
-// point or performing a flip operation, all possibly non-Delaunay edges are //
-// in 'facequeue'. The return value is the total number of flips done during //
-// this invocation. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-long tetgenmesh::flipsub(queue* flipqueue)
-{
- badface *qedge;
- face flipedge, symedge, bdedge;
- point pa, pb, pc, pd, liftpoint;
- REAL sign;
- int edgeflips;
-
- if (b->verbose > 1) {
- printf(" Start do edge queue: %ld edges.\n", flipqueue->len());
- }
-
- edgeflips = 0;
-
- while ((qedge = (badface *) flipqueue->pop()) != NULL) {
- flipedge = qedge->ss;
- if (flipedge.sh == dummysh) continue;
- if ((sorg(flipedge) != qedge->forg) ||
- (sdest(flipedge) != qedge->fdest)) continue;
- sspivot(flipedge, bdedge);
- if (bdedge.sh != dummysh) continue; // Can't flip a subsegment.
- spivot(flipedge, symedge);
- if (symedge.sh == dummysh) continue; // Can't flip a hull edge.
- pa = sorg(flipedge);
- pb = sdest(flipedge);
- pc = sapex(flipedge);
- pd = sapex(symedge);
- liftpoint = getliftpoint(shellmark(flipedge));
- // Check whether pd lies inside the circumcircle of pa, pb, pc or not.
- sign = insphere(pa, pb, pc, liftpoint, pd)
- * orient3d(pa, pb, pc, liftpoint);
- if (sign > 0.0) {
- // Flip the non-Delaunay edge.
- flip22sub(&flipedge, flipqueue);
- edgeflips++;
- }
- }
-
- if (b->verbose > 1) {
- printf(" Total %d flips.\n", edgeflips);
- }
-
- return edgeflips;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// incrflipinitsub() Create a initial triangulation. //
-// //
-// The initial triangulation only consists of one triangle formed by three //
-// non-collinear points. 'facetidx' is the index of the facet in 'facetlist' //
-// (starts from 1) of the tetgenio structure; 'ptlist' is a list of indices //
-// of the facet vertices; 'idx2verlist' is a map from indices to vertices. //
-// //
-// The 'lift point' of this facet is calculated. If not all vertices of the //
-// facet are collinear, such point is found by lifting the centroid of the //
-// set of vertices for a certain distance along the normal of this facet. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-incrflipinitsub(int facetidx, list* ptlist, point* idx2verlist)
-{
- face newsh;
- point pt1, pt2, pt3;
- point liftpoint, ptloop;
- REAL cent[3], norm[3];
- REAL v1[3], v2[3];
- REAL smallcos, cosa;
- REAL liftdist, len, vol;
- int smallidx;
- int idx, i;
-
- if (ptlist->len() > 3) {
- // Find a (non-degenerate) vector from the vertex set.
- idx = * (int *) (* ptlist)[0];
- pt1 = idx2verlist[idx - in->firstnumber];
- len = 0.0;
- // Loop the set of vertices until a not too small edge be found.
- for (i = 1; i < ptlist->len(); i++) {
- idx = * (int *) (* ptlist)[i];
- pt2 = idx2verlist[idx - in->firstnumber];
- v1[0] = pt2[0] - pt1[0];
- v1[1] = pt2[1] - pt1[1];
- v1[2] = pt2[2] - pt1[2];
- len = sqrt(dot(v1, v1));
- if ((len / longest) > (b->epsilon * 1e+2)) break;
- }
- // Remember this size as lift distance.
- liftdist = len;
- // 'v1' is a reasonable vector, normalize it.
- for (i = 0; i < 3; i++) v1[i] /= len;
- // Continue to find another (non-degenerate) vector, which forms an
- // angle with v1 most close to 90 degree.
- smallcos = 1.0; // The cosine value of 0 degree.
- for (i = 1; i < ptlist->len(); i++) {
- idx = * (int *) (* ptlist)[i];
- pt3 = idx2verlist[idx - in->firstnumber];
- if (pt3 == pt2) continue; // Skip the same point.
- v2[0] = pt3[0] - pt1[0];
- v2[1] = pt3[1] - pt1[1];
- v2[2] = pt3[2] - pt1[2];
- len = sqrt(dot(v2, v2));
- if (len > 0.0) { // v2 is not too small.
- cosa = fabs(dot(v1, v2)) / len;
- if (cosa < smallcos) {
- smallidx = idx;
- smallcos = cosa;
- }
- } else { // len == 0.0, two identical points defined in a facet.
- printf("Warning: Facet %d has two identical vertices: %d, %d.\n",
- facetidx, pointmark(pt1), pointmark(pt3));
- return false; // Invalid polygon, do not procced.
- }
- }
- if (smallcos == 1.0) {
- // The input set of vertices is not a good set (or nearly degenerate).
- printf("Warning: Facet %d with vertices: ", facetidx);
- for (i = 0; i < 3; i++) {
- idx = * (int *) (* ptlist)[i];
- ptloop = idx2verlist[idx - in->firstnumber];
- printf("%d ", pointmark(ptloop));
- }
- printf("... is degenerate.\n");
- return false; // Invalid polygon, do not procced.
- }
- // Get the right point to form v2.
- pt3 = idx2verlist[smallidx - in->firstnumber];
- assert(pt3 != pt2);
- v2[0] = pt3[0] - pt1[0];
- v2[1] = pt3[1] - pt1[1];
- v2[2] = pt3[2] - pt1[2];
- len = sqrt(dot(v2, v2));
- assert(len > 0.0);
- // Remember this size as lift distance.
- liftdist = (liftdist > len ? liftdist : len);
- // 'v2' is a reasonable vector, normalize it.
- for (i = 0; i < 3; i++) v2[i] /= len;
- } else {
- // There are only three vertices of this facet (a triangle).
- idx = * (int *) (* ptlist)[0];
- pt1 = idx2verlist[idx - in->firstnumber];
- idx = * (int *) (* ptlist)[1];
- pt2 = idx2verlist[idx - in->firstnumber];
- idx = * (int *) (* ptlist)[2];
- pt3 = idx2verlist[idx - in->firstnumber];
- v1[0] = pt2[0] - pt1[0];
- v1[1] = pt2[1] - pt1[1];
- v1[2] = pt2[2] - pt1[2];
- len = sqrt(dot(v1, v1));
- if (len == 0.0) {
- printf("Warning: Facet %d has two identical vertices: %d, %d.\n",
- facetidx, pointmark(pt1), pointmark(pt2));
- return false; // Invalid polygon, do not procced.
- }
- // Remember this size as lift distance.
- liftdist = len;
- // 'v1' is a reasonable vector, normalize it.
- for (i = 0; i < 3; i++) v1[i] /= len;
- v2[0] = pt3[0] - pt1[0];
- v2[1] = pt3[1] - pt1[1];
- v2[2] = pt3[2] - pt1[2];
- len = sqrt(dot(v2, v2));
- if (len == 0.0) {
- printf("Warning: Facet %d has two identical vertices: %d, %d.\n",
- facetidx, pointmark(pt1), pointmark(pt3));
- return false; // Invalid polygon, do not procced.
- }
- // Remember this size as lift distance.
- liftdist = (liftdist > len ? liftdist : len);
- // 'v2' is a reasonable vector, normalize it.
- for (i = 0; i < 3; i++) v2[i] /= len;
- }
- // Calculate the unit normal of this facet.
- cross(v1, v2, norm);
-
- // Calculate the centroid point of the vertex set. At the same time, check
- // whether vertices of this facet are roughly coplanar or not.
- cent[0] = cent[1] = cent[2] = 0.0;
- for (i = 0; i < ptlist->len(); i++) {
- idx = * (int *) (* ptlist)[i];
- ptloop = idx2verlist[idx - in->firstnumber];
- if (ptlist->len() > 3) {
- vol = orient3d(pt1, pt2, pt3, ptloop);
- if (vol != 0.0) {
- if (!iscoplanar(pt1, pt2, pt3, ptloop, vol, b->epsilon * 1e+3)) {
- printf("Warning: Facet %d has a non-coplanar vertex %d.\n",
- facetidx, pointmark(ptloop));
- // This is not a fatal problem, we still can procced.
- }
- }
- }
- cent[0] += ptloop[0];
- cent[1] += ptloop[1];
- cent[2] += ptloop[2];
- }
- for (i = 0; i < 3; i++) cent[i] /= ptlist->len();
- // Calculate the lifting point of the facet. It is lifted from 'cent'
- // along the normal direction with a certain ditance.
- liftpoint = getliftpoint(facetidx);
- for (i = 0; i < 3; i++) {
- liftpoint[i] = cent[i] + liftdist * norm[i];
- }
-
- // Create the initial triangle. The liftpoint is above (pt1, pt2, pt3).
- makeshellface(subfaces, &newsh);
- setsorg(newsh, pt1);
- setsdest(newsh, pt2);
- setsapex(newsh, pt3);
- // Remeber the facet it belongs to.
- setshellmark(newsh, facetidx);
- // Set vertices be type FACETVERTEX to indicate they belong to a facet.
- setpointtype(pt1, FACETVERTEX);
- setpointtype(pt2, FACETVERTEX);
- setpointtype(pt3, FACETVERTEX);
- // Bond this subface to 'dummysh' for point location routine.
- dummysh[0] = sencode(newsh);
-
- return true;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// collectvisiblesubs() Collect convex hull edges which are visible from //
-// the inserting point. Construct new subfaces from //
-// these edges and the point. //
-// //
-// 'facetidx' is the index of the facet in 'in->facetlist' (starts from 1), //
-// 'inspoint' is located outside current triangulation, 'horiz' is the hull //
-// edge it is visible. 'flipqueue' returns the visible hull edges which have //
-// become interior edges on completion of this routine. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-collectvisiblesubs(int facetidx, point inspoint, face* horiz, queue* flipqueue)
-{
- face newsh, hullsh;
- face rightsh, leftsh, spinedge;
- point horg, hdest, liftpoint;
- bool aboveflag;
-
- liftpoint = getliftpoint(facetidx);
-
- // Create a new subface above 'horiz'.
- adjustedgering(*horiz, CCW);
- makeshellface(subfaces, &newsh);
- setsorg(newsh, sdest(*horiz));
- setsdest(newsh, sorg(*horiz));
- setsapex(newsh, inspoint);
- setshellmark(newsh, facetidx);
- // Make the connection.
- sbond(newsh, *horiz);
- // 'horiz' becomes interior edge.
- enqueueflipedge(*horiz, flipqueue);
-
- // Finish the hull edges at the right side of the newsh.
- hullsh = *horiz;
- while (1) {
- senext(newsh, rightsh);
- // Get the right hull edge of 'horiz' by spinning inside edges around
- // the origin of 'horiz' until reaching the 'dummysh'.
- spinedge = hullsh;
- do {
- hullsh = spinedge;
- senext2self(hullsh);
- spivot(hullsh, spinedge);
- adjustedgering(spinedge, CCW);
- } while (spinedge.sh != dummysh);
- // Test whether 'inspoint' is visible from 'hullsh'.
- horg = sorg(hullsh);
- hdest = sdest(hullsh);
- aboveflag = orient3d(horg, hdest, liftpoint, inspoint) < 0.0;
- if (aboveflag) {
- // It's a visible hull edge.
- makeshellface(subfaces, &newsh);
- setsorg(newsh, sdest(hullsh));
- setsdest(newsh, sorg(hullsh));
- setsapex(newsh, inspoint);
- setshellmark(newsh, facetidx);
- // Make the connection.
- sbond(newsh, hullsh);
- senext2(newsh, leftsh);
- sbond(leftsh, rightsh);
- // 'horiz' becomes interior edge.
- enqueueflipedge(hullsh, flipqueue);
- } else {
- // 'rightsh' is a new hull edge.
- dummysh[0] = sencode(rightsh);
- break;
- }
- }
-
- // Finish the hull edges at the left side of the newsh.
- hullsh = *horiz;
- spivot(*horiz, newsh);
- while (1) {
- senext2(newsh, leftsh);
- // Get the left hull edge of 'horiz' by spinning edges around the
- // destination of 'horiz'.
- spinedge = hullsh;
- do {
- hullsh = spinedge;
- senextself(hullsh);
- spivot(hullsh, spinedge);
- adjustedgering(spinedge, CCW);
- } while (spinedge.sh != dummysh);
- // Test whether 'inspoint' is visible from 'hullsh'.
- horg = sorg(hullsh);
- hdest = sdest(hullsh);
- aboveflag = orient3d(horg, hdest, liftpoint, inspoint) < 0.0;
- if (aboveflag) {
- // It's a visible hull edge.
- makeshellface(subfaces, &newsh);
- setsorg(newsh, sdest(hullsh));
- setsdest(newsh, sorg(hullsh));
- setsapex(newsh, inspoint);
- setshellmark(newsh, facetidx);
- // Make the connection.
- sbond(newsh, hullsh);
- senext(newsh, rightsh);
- sbond(rightsh, leftsh);
- // 'horiz' becomes interior edge.
- enqueueflipedge(hullsh, flipqueue);
- } else {
- // 'leftsh' is a new hull edge.
- dummysh[0] = sencode(leftsh);
- break;
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// incrflipdelaunaysub() Create a Delaunay triangulation from a 3D point //
-// set using the incremental flip algorithm. //
-// //
-// 'facetidx' is the index of the facet in 'in->facetlist' (starts from 1), //
-// 'ptlist' is the index list of the vertices of the facet, 'idx2verlist' is //
-// a map from indices to vertices. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-incrflipdelaunaysub(int facetidx, list* ptlist, point* idx2verlist,
- queue* flipqueue)
-{
- face startsh;
- point pointloop;
- enum locateresult loc;
- int idx, i;
-
- for (i = 1; i < ptlist->len(); i++) {
- idx = * (int *) (* ptlist)[i];
- pointloop = idx2verlist[idx - in->firstnumber];
- // Set vertices be type FACETVERTEX to indicate they belong to a facet.
- setpointtype(pointloop, FACETVERTEX);
- startsh.sh = dummysh;
- loc = locatesub(pointloop, &startsh, NULL);
- if (loc == ONVERTEX) continue;
- if (loc == ONFACE) {
- splitsubface(pointloop, &startsh, flipqueue);
- } else if (loc == ONEDGE) {
- splitsubedge(pointloop, &startsh, flipqueue);
- } else if (loc == OUTSIDE) {
- collectvisiblesubs(facetidx, pointloop, &startsh, flipqueue);
- }
- flipsub(flipqueue);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// finddirectionsub() Find the first subface in a facet on the path from //
-// one point to another. //
-// //
-// Finds the subface in the facet that intersects a line segment drawn from //
-// the origin of `searchsh' to the point `tend', and returns the result in //
-// `searchsh'. The origin of `searchsh' does not change, even though the //
-// subface returned may differ from the one passed in. //
-// //
-// The return value notes whether the destination or apex of the found face //
-// is collinear with the two points in question. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::finddirectionresult tetgenmesh::
-finddirectionsub(face* searchsh, point tend)
-{
- face checksh;
- point startpoint, liftpoint;
- point leftpoint, rightpoint;
- REAL leftccw, rightccw;
- int leftflag, rightflag;
-
- adjustedgering(*searchsh, CCW);
- liftpoint = getliftpoint(shellmark(*searchsh));
- startpoint = sorg(*searchsh);
- rightpoint = sdest(*searchsh);
- leftpoint = sapex(*searchsh);
- // Is `tend' to the left?
- leftccw = orient3d(tend, startpoint, liftpoint, leftpoint);
- leftflag = leftccw > 0.0;
- // Is `tend' to the right?
- rightccw = orient3d(startpoint, tend, liftpoint, rightpoint);
- rightflag = rightccw > 0.0;
- if (leftflag && rightflag) {
- // `searchsh' faces directly away from `tend'. We could go left or
- // right. Ask whether it's a triangle or a boundary on the left.
- senext2(*searchsh, checksh);
- spivotself(checksh);
- if (checksh.sh == dummysh) {
- leftflag = 0;
- } else {
- rightflag = 0;
- }
- }
- while (leftflag) {
- // Turn left until satisfied.
- senext2self(*searchsh);
- spivotself(*searchsh);
- if (searchsh->sh == dummysh) {
- printf("Internal error in finddirectionsub(): Unable to find a\n");
- printf(" triangle leading from %d to %d.\n", pointmark(startpoint),
- pointmark(tend));
- internalerror();
- }
- adjustedgering(*searchsh, CCW);
- leftpoint = sapex(*searchsh);
- rightccw = leftccw;
- leftccw = orient3d(tend, startpoint, liftpoint, leftpoint);
- leftflag = leftccw > 0.0;
- }
- while (rightflag) {
- // Turn right until satisfied.
- spivotself(*searchsh);
- if (searchsh->sh == dummysh) {
- printf("Internal error in finddirectionsub(): Unable to find a\n");
- printf(" triangle leading from %d to %d.\n", pointmark(startpoint),
- pointmark(tend));
- internalerror();
- }
- adjustedgering(*searchsh, CCW);
- senextself(*searchsh);
- rightpoint = sdest(*searchsh);
- leftccw = rightccw;
- rightccw = orient3d(startpoint, tend, liftpoint, rightpoint);
- rightflag = rightccw > 0.0;
- }
- if (leftccw == 0.0) {
- return LEFTCOLLINEAR;
- } else if (rightccw == 0.0) {
- return RIGHTCOLLINEAR;
- } else {
- return ACROSSEDGE;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insertsubseg() Create a subsegment and insert it between two subfaces. //
-// //
-// The new subsegment is inserted at the edge described by the handle 'tri'. //
-// If 'tri' is not on the hull, the segment is inserted between two faces. //
-// If 'tri' is a hull face, the initial face ring of this segment will be //
-// set only one face which is self-bonded. The official face ring will be //
-// constructed later in routine unifysegments(). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::insertsubseg(face* tri)
-{
- face oppotri;
- face newsubseg;
-
- // Check if there's already a subsegment here.
- sspivot(*tri, newsubseg);
- if (newsubseg.sh == dummysh) {
- // Make new subsegment and initialize its vertices.
- makeshellface(subsegs, &newsubseg);
- setsorg(newsubseg, sorg(*tri));
- setsdest(newsubseg, sdest(*tri));
- // Bond new subsegment to the two triangles it is sandwiched between.
- ssbond(*tri, newsubseg);
- spivot(*tri, oppotri);
- // 'oppotri' might be "out space".
- if (oppotri.sh != dummysh) {
- ssbond(oppotri, newsubseg);
- } else {
- // Outside! Bond '*tri' to itself.
- sbond(*tri, *tri);
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// scoutsegmentsub() Scout the first triangle on the path from one point //
-// to another, and check for completion (reaching the //
-// second point), a collinear point,or the intersection //
-// of two segments. //
-// //
-// Returns true if the entire segment is successfully inserted, and false if //
-// the job must be finished by constrainededge(). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::scoutsegmentsub(face* searchsh, point tend)
-{
- face newsubseg;
- face crosssub, crosssubseg;
- point leftpoint, rightpoint;
- enum finddirectionresult collinear;
-
- collinear = finddirectionsub(searchsh, tend);
- rightpoint = sdest(*searchsh);
- leftpoint = sapex(*searchsh);
- if (rightpoint == tend || leftpoint == tend) {
- // The segment is already an edge.
- if (leftpoint == tend) {
- senext2self(*searchsh);
- }
- // Insert a subsegment.
- insertsubseg(searchsh);
- return true;
- } else if (collinear == LEFTCOLLINEAR) {
- // We've collided with a vertex between the segment's endpoints.
- // Make the collinear vertex be the triangle's origin.
- senextself(*searchsh); // lprevself(*searchtri);
- // Insert a subsegment.
- insertsubseg(searchsh);
- // Insert the remainder of the segment.
- return scoutsegmentsub(searchsh, tend);
- } else if (collinear == RIGHTCOLLINEAR) {
- // We've collided with a vertex between the segment's endpoints.
- // Insert a subsegment.
- insertsubseg(searchsh);
- // Make the collinear vertex be the triangle's origin.
- senextself(*searchsh); // lnextself(*searchtri);
- // Insert the remainder of the segment.
- return scoutsegmentsub(searchsh, tend);
- } else {
- senext(*searchsh, crosssub); // lnext(*searchtri, crosstri);
- // Check for a crossing segment.
- sspivot(crosssub, crosssubseg);
- assert(crosssubseg.sh == dummysh);
- return false;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// delaunayfixup() Enforce the Delaunay condition at an edge, fanning out //
-// recursively from an existing point. Pay special //
-// attention to stacking inverted triangles. //
-// //
-// This is a support routine for inserting segments into a constrained //
-// Delaunay triangulation. //
-// //
-// The origin of 'fixupsh' is treated as if it has just been inserted, and //
-// the local Delaunay condition needs to be enforced. It is only enforced in //
-// one sector, however, that being the angular range defined by 'fixupsh'. //
-// //
-// `leftside' indicates whether or not fixupsh is to the left of the segment //
-// being inserted. (Imagine that the segment is pointing up from endpoint1 //
-// to endpoint2.) //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::delaunayfixup(face* fixupsh, int leftside)
-{
- face nearsh, farsh, faredge;
- point nearpoint, leftpoint, rightpoint, farpoint;
- point liftpoint;
- REAL sign;
-
- // It is up to the caller, that 'fixupsh' must be in CCW edge ring.
- // adjustedgering(*fixupsh, CCW);
- assert((fixupsh->shver % 2) == 0);
- senext(*fixupsh, nearsh);
- spivot(nearsh, farsh);
- if (nearsh.sh == farsh.sh) {
- farsh.sh = dummysh;
- }
- // Check if the edge opposite the origin of fixupsh can be flipped.
- if (farsh.sh == dummysh) {
- return;
- }
- adjustedgering(farsh, CCW);
- sspivot(nearsh, faredge);
- if (faredge.sh != dummysh) {
- return;
- }
- // Find all the relevant vertices.
- liftpoint = getliftpoint(shellmark(*fixupsh));
- nearpoint = sapex(nearsh);
- leftpoint = sorg(nearsh);
- rightpoint = sdest(nearsh);
- farpoint = sapex(farsh);
- // Check whether the previous polygon point is a reflex point.
- if (leftside) {
- if (orient3d(nearpoint, leftpoint, liftpoint, farpoint) <= 0.0) {
- // leftpoint is a reflex point too. Nothing can
- // be done until a convex section is found.
- return;
- }
- } else {
- if (orient3d(farpoint, rightpoint, liftpoint, nearpoint) <= 0.0) {
- // rightpoint is a reflex point too. Nothing can
- // be done until a convex section is found.
- return;
- }
- }
- if (orient3d(rightpoint, leftpoint, liftpoint, farpoint) > 0.0) {
- // farsh is not an inverted triangle, and farpoint is not a reflex
- // point. As there are no reflex vertices, fixupsh isn't an
- // inverted triangle, either. Hence, test the edge between the
- // triangles to ensure it is locally Delaunay.
- sign = insphere(leftpoint, farpoint, rightpoint, liftpoint, nearpoint)
- * orient3d(leftpoint, farpoint, rightpoint, liftpoint);
- if (sign <= 0.0) {
- return;
- }
- // Not locally Delaunay; go on to an edge flip.
- } // else farsh is inverted; remove it from the stack by flipping.
- flip22sub(&nearsh, NULL);
- senext2self(*fixupsh); // Restore the origin of fixupsh after the flip.
- // Recursively process the two triangles that result from the flip.
- delaunayfixup(fixupsh, leftside);
- delaunayfixup(&farsh, leftside);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// constrainededge() Force a segment into a constrained Delaunay //
-// triangulation by deleting the triangles it //
-// intersects, and triangulating the polygons that //
-// form on each side of it. //
-// //
-// Generates a single subsegment connecting `tstart' to `tend'. The triangle //
-// `startsh' has `tstart' as its origin. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::constrainededge(face* startsh, point tend)
-{
- face fixupsh, fixupsh2;
- face crosssubseg, newsubseg;
- point tstart, farpoint;
- point liftpoint;
- REAL area;
- int collision;
- int done;
-
- liftpoint = getliftpoint(shellmark(*startsh));
- tstart = sorg(*startsh);
- // Always works in the CCW edge ring.
- adjustedgering(*startsh, CCW);
- // Make sure the 'tstart' remians be the origin.
- if (sorg(*startsh) != tstart) {
- senextself(*startsh);
- assert(sorg(*startsh) == tstart);
- }
- senext(*startsh, fixupsh);
- flip22sub(&fixupsh, NULL);
- // `collision' indicates whether we have found a vertex directly
- // between endpoint1 and endpoint2.
- collision = 0;
- done = 0;
- do {
- farpoint = sorg(fixupsh);
- // `farpoint' is the extreme point of the polygon we are "digging"
- // to get from tstart to tend.
- if (farpoint == tend) {
- spivot(fixupsh, fixupsh2); // oprev(fixupsh, fixupsh2);
- adjustedgering(fixupsh2, CCW);
- senextself(fixupsh2);
- // Enforce the Delaunay condition around tend.
- delaunayfixup(&fixupsh, 0);
- delaunayfixup(&fixupsh2, 1);
- done = 1;
- } else {
- // Check whether farpoint is to the left or right of the segment
- // being inserted, to decide which edge of fixupsh to dig
- // through next.
- area = orient3d(tstart, tend, liftpoint, farpoint);
- if (area == 0.0) {
- // We've collided with a vertex between tstart and tend.
- collision = 1;
- spivot(fixupsh, fixupsh2); // oprev(fixupsh, fixupsh2);
- adjustedgering(fixupsh2, CCW);
- senextself(fixupsh2);
- // Enforce the Delaunay condition around farpoint.
- delaunayfixup(&fixupsh, 0);
- delaunayfixup(&fixupsh2, 1);
- done = 1;
- } else {
- if (area > 0.0) { // farpoint is to the left of the segment.
- spivot(fixupsh, fixupsh2); // oprev(fixupsh, fixupsh2);
- adjustedgering(fixupsh2, CCW);
- senextself(fixupsh2);
- // Enforce the Delaunay condition around farpoint, on the
- // left side of the segment only.
- delaunayfixup(&fixupsh2, 1);
- // Flip the edge that crosses the segment. After the edge is
- // flipped, one of its endpoints is the fan vertex, and the
- // destination of fixupsh is the fan vertex.
- senext2self(fixupsh); // lprevself(fixupsh);
- } else { // farpoint is to the right of the segment.
- delaunayfixup(&fixupsh, 0);
- // Flip the edge that crosses the segment. After the edge is
- // flipped, one of its endpoints is the fan vertex, and the
- // destination of fixupsh is the fan vertex.
- spivotself(fixupsh); // oprevself(fixupsh);
- adjustedgering(fixupsh, CCW);
- senextself(fixupsh);
- }
- // Check for two intersecting segments.
- sspivot(fixupsh, crosssubseg);
- if (crosssubseg.sh == dummysh) {
- flip22sub(&fixupsh, NULL);// May create inverted triangle at left.
- } else {
- // We've collided with a segment between tstart and tend.
- /* collision = 1;
- // Insert a vertex at the intersection.
- segmentintersection(m, b, &fixupsh, &crosssubseg, tend);
- done = 1;
- */
- assert(0);
- }
- }
- }
- } while (!done);
- // Insert a subsegment to make the segment permanent.
- insertsubseg(&fixupsh);
- // If there was a collision with an interceding vertex, install another
- // segment connecting that vertex with endpoint2.
- if (collision) {
- // Insert the remainder of the segment.
- if (!scoutsegmentsub(&fixupsh, tend)) {
- constrainededge(&fixupsh, tend);
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insertsegmentsub() Insert a PSLG segment into a triangulation. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::insertsegmentsub(point tstart, point tend)
-{
- face searchsh1, searchsh2;
-
- if (b->verbose > 2) {
- printf(" Insert subsegment (%d, %d).\n", pointmark(tstart),
- pointmark(tend));
- }
-
- // Find a triangle whose origin is the segment's first endpoint.
- searchsh1.sh = dummysh;
- // Search for the segment's first endpoint by point location.
- if (locatesub(tstart, &searchsh1, NULL) != ONVERTEX) {
- printf("Internal error in insertsegmentsub():");
- printf(" Unable to locate PSLG vertex %d.\n", pointmark(tstart));
- internalerror();
- }
- // Scout the beginnings of a path from the first endpoint
- // toward the second.
- if (scoutsegmentsub(&searchsh1, tend)) {
- // The segment was easily inserted.
- return;
- }
- // The first endpoint may have changed if a collision with an intervening
- // vertex on the segment occurred.
- tstart = sorg(searchsh1);
-
- // Find a boundary triangle to search from.
- searchsh2.sh = dummysh;
- // Search for the segment's second endpoint by point location.
- if (locatesub(tend, &searchsh2, NULL) != ONVERTEX) {
- printf("Internal error in insertsegmentsub():");
- printf(" Unable to locate PSLG vertex %d.\n", pointmark(tend));
- internalerror();
- }
- // Scout the beginnings of a path from the second endpoint
- // toward the first.
- if (scoutsegmentsub(&searchsh2, tstart)) {
- // The segment was easily inserted.
- return;
- }
- // The second endpoint may have changed if a collision with an intervening
- // vertex on the segment occurred.
- tend = sorg(searchsh2);
-
- // Insert the segment directly into the triangulation.
- constrainededge(&searchsh1, tend);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// infecthullsub() Virally infect all of the triangles of the convex hull //
-// that are not protected by subsegments. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::infecthullsub(memorypool* viri)
-{
- face hulltri, nexttri, starttri;
- face hullsubseg;
- shellface **deadshellface;
-
- // Find a triangle handle on the hull.
- hulltri.sh = dummysh;
- hulltri.shver = 0;
- spivotself(hulltri);
- adjustedgering(hulltri, CCW);
- // Remember where we started so we know when to stop.
- starttri = hulltri;
- // Go once counterclockwise around the convex hull.
- do {
- // Ignore triangles that are already infected.
- if (!sinfected(hulltri)) {
- // Is the triangle protected by a subsegment?
- sspivot(hulltri, hullsubseg);
- if (hullsubseg.sh == dummysh) {
- // The triangle is not protected; infect it.
- if (!sinfected(hulltri)) {
- sinfect(hulltri);
- deadshellface = (shellface **) viri->alloc();
- *deadshellface = hulltri.sh;
- }
- }
- }
- // To find the next hull edge, go clockwise around the next vertex.
- senextself(hulltri); // lnextself(hulltri);
- spivot(hulltri, nexttri); // oprev(hulltri, nexttri);
- if (nexttri.sh == hulltri.sh) {
- nexttri.sh = dummysh; // 'hulltri' is self-bonded.
- } else {
- adjustedgering(nexttri, CCW);
- senextself(nexttri);
- }
- while (nexttri.sh != dummysh) {
- hulltri = nexttri;
- spivot(hulltri, nexttri); // oprev(hulltri, nexttri);
- if (nexttri.sh == hulltri.sh) {
- nexttri.sh = dummysh; // 'hulltri' is self-bonded.
- } else {
- adjustedgering(nexttri, CCW);
- senextself(nexttri);
- }
- }
- } while (hulltri != starttri);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// plaguesub() Spread the virus from all infected triangles to any //
-// neighbors not protected by subsegments. Delete all //
-// infected triangles. //
-// //
-// This is the procedure that actually creates holes and concavities. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::plaguesub(memorypool* viri)
-{
- face testtri, neighbor, ghostsh;
- face neighborsubseg;
- shellface **virusloop;
- shellface **deadshellface;
- int i;
-
- // Loop through all the infected triangles, spreading the virus to
- // their neighbors, then to their neighbors' neighbors.
- viri->traversalinit();
- virusloop = (shellface **) viri->traverse();
- while (virusloop != (shellface **) NULL) {
- testtri.sh = *virusloop;
- // Check each of the triangle's three neighbors.
- for (i = 0; i < 3; i++) {
- // Find the neighbor.
- spivot(testtri, neighbor);
- // Check for a subsegment between the triangle and its neighbor.
- sspivot(testtri, neighborsubseg);
- // Check if the neighbor is nonexistent or already infected.
- if ((neighbor.sh == dummysh) || sinfected(neighbor)) {
- if (neighborsubseg.sh != dummysh) {
- // There is a subsegment separating the triangle from its
- // neighbor, but both triangles are dying, so the subsegment
- // dies too.
- shellfacedealloc(subsegs, neighborsubseg.sh);
- if (neighbor.sh != dummysh) {
- // Make sure the subsegment doesn't get deallocated again
- // later when the infected neighbor is visited.
- ssdissolve(neighbor);
- }
- }
- } else { // The neighbor exists and is not infected.
- if (neighborsubseg.sh == dummysh) {
- // There is no subsegment protecting the neighbor, so the
- // neighbor becomes infected.
- sinfect(neighbor);
- // Ensure that the neighbor's neighbors will be infected.
- deadshellface = (shellface **) viri->alloc();
- *deadshellface = neighbor.sh;
- } else { // The neighbor is protected by a subsegment.
- // Remove this triangle from the subsegment.
- ssbond(neighbor, neighborsubseg);
- }
- }
- senextself(testtri);
- }
- virusloop = (shellface **) viri->traverse();
- }
-
- ghostsh.sh = dummysh; // A handle of outer space.
- viri->traversalinit();
- virusloop = (shellface **) viri->traverse();
- while (virusloop != (shellface **) NULL) {
- testtri.sh = *virusloop;
- // Record changes in the number of boundary edges, and disconnect
- // dead triangles from their neighbors.
- for (i = 0; i < 3; i++) {
- spivot(testtri, neighbor);
- if (neighbor.sh != dummysh) {
- // Disconnect the triangle from its neighbor.
- // sdissolve(neighbor);
- sbond(neighbor, ghostsh);
- }
- senextself(testtri);
- }
- // Return the dead triangle to the pool of triangles.
- shellfacedealloc(subfaces, testtri.sh);
- virusloop = (shellface **) viri->traverse();
- }
- // Empty the virus pool.
- viri->restart();
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// carveholessub() Find the holes and infect them. Find the area //
-// constraints and infect them. Infect the convex hull. //
-// Spread the infection and kill triangles. Spread the //
-// area constraints. //
-// //
-// This routine mainly calls other routines to carry out all these functions.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::carveholessub(int holes, REAL* holelist)
-{
- face searchtri, triangleloop;
- shellface **holetri;
- memorypool *viri;
- enum locateresult intersect;
- int i;
-
- // Initialize a pool of viri to be used for holes, concavities.
- viri = new memorypool(sizeof(shellface *), 1024, POINTER, 0);
-
- // Mark as infected any unprotected triangles on the boundary.
- // This is one way by which concavities are created.
- infecthullsub(viri);
-
- if (holes > 0) {
- // Infect each triangle in which a hole lies.
- for (i = 0; i < 3 * holes; i += 3) {
- // Ignore holes that aren't within the bounds of the mesh.
- if ((holelist[i] >= xmin) && (holelist[i] <= xmax)
- && (holelist[i + 1] >= ymin) && (holelist[i + 1] <= ymax)
- && (holelist[i + 2] >= zmin) && (holelist[i + 2] <= zmax)) {
- // Start searching from some triangle on the outer boundary.
- searchtri.sh = dummysh;
- // Find a triangle that contains the hole.
- intersect = locatesub(&holelist[i], &searchtri, NULL);
- if ((intersect != OUTSIDE) && (!sinfected(searchtri))) {
- // Infect the triangle. This is done by marking the triangle
- // as infected and including the triangle in the virus pool.
- sinfect(searchtri);
- holetri = (shellface **) viri->alloc();
- *holetri = searchtri.sh;
- }
- }
- }
- }
-
- if (viri->items > 0) {
- // Carve the holes and concavities.
- plaguesub(viri);
- }
- // The virus pool should be empty now.
-
- // Free up memory.
- delete viri;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangulatefacet() Create the constrained Delaunay triang. of a facet. //
-// //
-// 'facetidx' is the index of the facet in 'in->facetlist' (starts from 1), //
-// 'idx2verlist' is a map from indices to vertices. 'ptlist' and 'conlist' //
-// are two lists used to assemble the input data for each facet, 'ptlist' //
-// stores the index set of its vertices, 'conlist' stores the set of its //
-// segments, they should be empty on input and output. //
-// //
-// On completion, the CDT of this facet is constructed in pool 'subfaces'. //
-// Every isolated point on the facet will be set a type of FACETVERTEX. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-triangulatefacet(int facetidx, list* ptlist, list* conlist, point* idx2verlist,
- queue* flipqueue)
-{
- tetgenio::facet *f;
- tetgenio::polygon *p;
- point tstart, tend;
- int end1, end2;
- int *cons, idx1, idx2;
- int i, j;
-
- if (b->verbose > 1) {
- printf(" Triangulate facet %d.\n", facetidx);
- }
-
- // Get the pointer of the facet.
- f = &in->facetlist[facetidx - 1];
-
- // Are there duplicated points?
- if ((b->object == tetgenbehavior::STL) || dupverts) {
- // Loop all polygons of this facet.
- for (i = 0; i < f->numberofpolygons; i++) {
- p = &(f->polygonlist[i]);
- // Loop other vertices of this polygon.
- for (j = 0; j < p->numberofvertices; j++) {
- idx1 = p->vertexlist[j];
- tstart = idx2verlist[idx1 - in->firstnumber];
- if (pointtype(tstart) == DUPLICATEDVERTEX) {
- // Reset the index of vertex-j.
- tend = point2pt(tstart);
- idx2 = pointmark(tend);
- p->vertexlist[j] = idx2;
- }
- }
- }
- }
-
- // Loop all polygons of this facet, get the sets of vertices and segments.
- for (i = 0; i < f->numberofpolygons; i++) {
- p = &(f->polygonlist[i]);
- // Get the first vertex.
- end1 = p->vertexlist[0];
- if ((end1 < in->firstnumber) ||
- (end1 >= in->firstnumber + in->numberofpoints)) {
- if (!b->quiet) {
- printf("Warning: Invalid the 1st vertex %d of polygon", end1);
- printf(" %d in facet %d.\n", i + 1, facetidx);
- }
- break; // Skip to mesh this facet.
- }
- // Save it in 'ptlist' if it didn't be added, and set its position.
- idx1 = ptlist->hasitem(&end1);
- if (idx1 == -1) {
- ptlist->append(&end1);
- idx1 = ptlist->len() - 1;
- }
- // Loop other vertices of this polygon.
- for (j = 1; j <= p->numberofvertices; j++) {
- // get a vertex.
- if (j < p->numberofvertices) {
- end2 = p->vertexlist[j];
- } else {
- end2 = p->vertexlist[0]; // Form a loop from last to first.
- }
- if ((end2 < in->firstnumber) ||
- (end2 >= in->firstnumber + in->numberofpoints)) {
- if (!b->quiet) {
- printf("Warning: Invalid vertex %d in polygon %d", end2, i + 1);
- printf(" in facet %d.\n", facetidx);
- }
- } else {
- if (end1 != end2) {
- // 'end1' and 'end2' form a segment. Save 'end2' in 'ptlist' if
- // it didn't be added before.
- idx2 = ptlist->hasitem(&end2);
- if (idx2 == -1) {
- ptlist->append(&end2);
- idx2 = ptlist->len() - 1;
- }
- // Save the segment in 'conlist'.
- cons = (int *) conlist->append(NULL);
- cons[0] = idx1;
- cons[1] = idx2;
- // Set the start for next continuous segment.
- end1 = end2;
- idx1 = idx2;
- } else {
- // It's a (degenerate) segment with identical endpoints, which
- // represents an isolate vertex in facet.
- if (p->numberofvertices > 2) {
- // This may be an error in the input, anyway, we let it be.
- if (!b->quiet) {
- printf("Warning: Polygon %d has two identical vertices", i + 1);
- printf(" in facet %d.\n", facetidx);
- }
- }
- // Set the vertex type be 'FACETVERTEX'.
- // setpointtype(idx2verlist[end1 - in->firstnumber], FACETVERTEX);
- // Ignore this vertex.
- }
- }
- if (p->numberofvertices == 2) {
- // This case the polygon is either a segment or an isolated vertex.
- break;
- }
- }
- }
-
- // Have got the vertex list and segment list.
- if (b->verbose > 1) {
- printf(" %d vertices, %d segments", ptlist->len(), conlist->len());
- if (f->numberofholes > 0) {
- printf(", %d holes\n", f->numberofholes);
- }
- printf(".\n");
- }
-
- if (ptlist->len() > 2) {
- // Construct an initial triangulation.
- if (incrflipinitsub(facetidx, ptlist, idx2verlist)) {
- if (ptlist->len() > 3) {
- // Create the Delaunay triangulation of 'ptlist'.
- incrflipdelaunaysub(facetidx, ptlist, idx2verlist, flipqueue);
- }
- // Insert segments (in 'conlist') into the Delaunay triangulation.
- for (i = 0; i < conlist->len(); i++) {
- cons = (int *)(* conlist)[i];
- idx1 = * (int *)(* ptlist)[cons[0]];
- tstart = idx2verlist[idx1 - in->firstnumber];
- idx2 = * (int *)(* ptlist)[cons[1]];
- tend = idx2verlist[idx2 - in->firstnumber];
- insertsegmentsub(tstart, tend);
- }
- if (ptlist->len() > 3 && conlist->len() > 3) {
- // Carve holes and concavities.
- carveholessub(f->numberofholes, f->holelist);
- }
- }
- }
-
- // Clear working lists.
- ptlist->clear();
- conlist->clear();
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// unifysegments() Unify identical segments and build facet connections. //
-// //
-// After the surface mesh has been created. Each facet has its own segments. //
-// There are many segments having the same endpoints, which are indentical. //
-// This routine has two purposes: (1) identify the set of segments which //
-// have the same endpoints and unify them into one segment, remove redundant //
-// ones; and (2) create the face rings of the unified segments, hence, setup //
-// the facet connections. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::unifysegments()
-{
- list *sfacelist;
- shellface **facesperverlist;
- face subsegloop, testseg;
- face sface, sface1, sface2;
- point torg, tdest;
- REAL da1, da2;
- int *idx2facelist;
- int idx, k, m;
-
- if (b->verbose) {
- printf(" Unifying segments.\n");
- }
-
- // Compute a mapping from indices of vertices to subfaces.
- makesubfacemap(idx2facelist, facesperverlist);
- // Initialize 'sfacelist' for constructing the face link of each segment.
- sfacelist = new list(sizeof(face), NULL);
-
- subsegs->traversalinit();
- subsegloop.sh = shellfacetraverse(subsegs);
- while (subsegloop.sh != (shellface *) NULL) {
- subsegloop.shver = 0; // For sure.
- torg = sorg(subsegloop);
- tdest = sdest(subsegloop);
- idx = pointmark(torg) - in->firstnumber;
- // Loop through the set of subfaces containing 'torg'. Get all the
- // subfaces containing the edge (torg, tdest). Save and order them
- // in 'sfacelist', the ordering is defined by the right-hand rule
- // with thumb points from torg to tdest.
- for (k = idx2facelist[idx]; k < idx2facelist[idx + 1]; k++) {
- sface.sh = facesperverlist[k];
- sface.shver = 0;
- // sface may be died due to the removing of duplicated subfaces.
- if (!isdead(&sface) && isfacehasedge(&sface, torg, tdest)) {
- // 'sface' contains this segment.
- findedge(&sface, torg, tdest);
- // Save it in 'sfacelist'.
- if (sfacelist->len() < 2) {
- sfacelist->append(&sface);
- } else {
- for (m = 0; m < sfacelist->len() - 1; m++) {
- sface1 = * (face *)(* sfacelist)[m];
- sface2 = * (face *)(* sfacelist)[m + 1];
- da1 = facedihedral(torg, tdest, sapex(sface1), sapex(sface));
- da2 = facedihedral(torg, tdest, sapex(sface1),sapex(sface2));
- if (da1 < da2) {
- break; // Insert it after m.
- }
- }
- sfacelist->insert(m + 1, &sface);
- }
- }
- }
- if (b->verbose > 1) {
- printf(" Identifying %d segments of (%d %d).\n", sfacelist->len(),
- pointmark(torg), pointmark(tdest));
- }
- // Set the connection between this segment and faces containing it,
- // at the same time, remove redundant segments.
- for (k = 0; k < sfacelist->len(); k++) {
- sface = *(face *)(* sfacelist)[k];
- sspivot(sface, testseg);
- // If 'testseg' is not 'subsegloop', it is a redundant segment that
- // needs be removed. BE CAREFUL it may already be removed. Do not
- // remove it twice, i.e., we need do test 'isdead()' together.
- if ((testseg.sh != subsegloop.sh) && !isdead(&testseg)) {
- shellfacedealloc(subsegs, testseg.sh);
- }
- // 'ssbond' bonds the subface and the segment together, and dissloves
- // the old bond as well.
- ssbond(sface, subsegloop);
- }
- // Set connection between these faces.
- sface = *(face *)(* sfacelist)[0];
- for (k = 1; k <= sfacelist->len(); k++) {
- if (k < sfacelist->len()) {
- sface1 = *(face *)(* sfacelist)[k];
- } else {
- sface1 = *(face *)(* sfacelist)[0]; // Form a face loop.
- }
- /*
- // Check if these two subfaces are the same. It is possible when user
- // defines one facet (or polygon) two or more times. If they are,
- // they should not be bonded together, instead of that, one of them
- // should be delete from the surface mesh.
- if ((sfacelist->len() > 1) && sapex(sface) == sapex(sface1)) {
- // They are duplicated faces.
- if (b->verbose) {
- printf(" A duplicated subface (%d, %d, %d) is removed.\n",
- pointmark(torg), pointmark(tdest), pointmark(sapex(sface)));
- }
- if (k == sfacelist->len()) {
- // 'sface' is the last face, however, it is same as the first one.
- // In order to form the ring, we have to let the second last
- // face bond to the first one 'sface1'.
- shellfacedealloc(subfaces, sface.sh);
- assert(sfacelist->len() >= 2);
- assert(k == sfacelist->len());
- sface = *(face *)(* sfacelist)[k - 2];
- } else {
- // 'sface1' is in the middle and may be the last one.
- shellfacedealloc(subfaces, sface1.sh);
- // Skip this face and go to the next one.
- continue;
- }
- }
- */
- if (b->verbose > 2) {
- printf(" Bond subfaces (%d, %d, %d) and (%d, %d, %d).\n",
- pointmark(torg), pointmark(tdest), pointmark(sapex(sface)),
- pointmark(torg), pointmark(tdest), pointmark(sapex(sface1)));
- }
- sbond1(sface, sface1);
- sface = sface1;
- }
- // Clear the working list.
- sfacelist->clear();
- subsegloop.sh = shellfacetraverse(subsegs);
- }
-
- delete [] idx2facelist;
- delete [] facesperverlist;
- delete sfacelist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// mergefacets() Merge adjacent facets to be one facet if they are //
-// coplanar and have the same boundary marker. //
-// //
-// Segments between two merged facets will be removed from the mesh. If all //
-// segments around a vertex have been removed, change its vertex type to be //
-// FACETVERTEX. Edge flips will be performed to ensure the Delaunay criteria //
-// of the triangulation of merged facets. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::mergefacets(queue* flipqueue)
-{
- face parentsh, neighsh, neineighsh;
- face segloop;
- point eorg, edest;
- REAL ori;
- bool mergeflag;
- int* segspernodelist;
- int fidx1, fidx2;
- int i, j;
-
- if (b->verbose) {
- printf(" Merging coplanar facets.\n");
- }
- // Create and initialize 'segspernodelist'.
- segspernodelist = new int[points->items + 1];
- for (i = 0; i < points->items + 1; i++) {
- segspernodelist[i] = 0;
- }
-
- // Loop the segments, counter the number of segments sharing each vertex.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- // Increment the number of sharing segments for each endpoint.
- for (i = 0; i < 2; i++) {
- j = pointmark((point) segloop.sh[3 + i]);
- segspernodelist[j]++;
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
-
- // Loop the segments, find out dead segments.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- eorg = sorg(segloop);
- edest = sdest(segloop);
- spivot(segloop, parentsh);
- spivot(parentsh, neighsh);
- spivot(neighsh, neineighsh);
- if (parentsh.sh != neighsh.sh && parentsh.sh == neineighsh.sh) {
- // Exactly two subfaces at this segment.
- fidx1 = shellmark(parentsh) - 1;
- fidx2 = shellmark(neighsh) - 1;
- // Possibly merge them if they are not in the same facet.
- if (fidx1 != fidx2) {
- // Test if they are coplanar.
- ori = orient3d(eorg, edest, sapex(parentsh), sapex(neighsh));
- if (ori != 0.0) {
- if (iscoplanar(eorg, edest, sapex(parentsh), sapex(neighsh), ori,
- b->epsilon)) {
- ori = 0.0; // They are assumed as coplanar.
- }
- }
- if (ori == 0.0) {
- mergeflag = (in->facetmarkerlist == (int *) NULL ||
- in->facetmarkerlist[fidx1] == in->facetmarkerlist[fidx2]);
- if (mergeflag) {
- // This segment becomes dead.
- if (b->verbose > 1) {
- printf(" Removing segment (%d, %d).\n", pointmark(eorg),
- pointmark(edest));
- }
- ssdissolve(parentsh);
- ssdissolve(neighsh);
- shellfacedealloc(subsegs, segloop.sh);
- j = pointmark(eorg);
- segspernodelist[j]--;
- if (segspernodelist[j] == 0) {
- setpointtype(eorg, FACETVERTEX);
- }
- j = pointmark(edest);
- segspernodelist[j]--;
- if (segspernodelist[j] == 0) {
- setpointtype(edest, FACETVERTEX);
- }
- // Add 'parentsh' to queue checking for flip.
- enqueueflipedge(parentsh, flipqueue);
- }
- }
- }
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
-
- if (!flipqueue->empty()) {
- // Restore the Delaunay property in the facet triangulation.
- flipsub(flipqueue);
- }
-
- delete [] segspernodelist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// meshsurface() Create a surface triangulation of a PLC. //
-// //
-// The surface mesh consists of a set of subfaces which are two dimensional //
-// constrained Delaunay triangulations of the facets of the PLC and a set of //
-// subsegments which are edges bounded the facets. Subfaces belong to one //
-// facet are connecting each other. Around each subsegment is a subface ring,//
-// which saves the connection between facets sharing at this subsegment. //
-// //
-// This routine first creates the CDTs separatly, that is, each facet will //
-// be meshed into a set of subfaces and subsegments. As a result, subfaces //
-// only have connections to subfaces which are belong to the same facet. And //
-// subsegments are over-created. Then, routine unifysegment() is called to //
-// remove redundant subsegments and create the face ring around subsegments. //
-// //
-// Return the number of (input) segments. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-long tetgenmesh::meshsurface()
-{
- list *ptlist, *conlist;
- queue *flipqueue;
- point *idx2verlist;
- int i;
-
- if (!b->quiet) {
- printf("Creating surface mesh.\n");
- }
-
- // Compute a mapping from indices to points.
- makeindex2pointmap(idx2verlist);
- // Initialize 'liftpointarray'.
- liftpointarray = new REAL[in->numberoffacets * 3];
- // Initialize 'flipqueue'.
- flipqueue = new queue(sizeof(badface));
- // Two re-useable lists 'ptlist' and 'conlist'.
- ptlist = new list("int");
- conlist = new list(sizeof(int) * 2, NULL);
-
- // Loop the facet list, triangulate each facet. On finish, all subfaces
- // are in 'subfaces', all segments are in 'subsegs' (Note: there exist
- // duplicated segments).
- for (i = 0; i < in->numberoffacets; i++) {
- triangulatefacet(i + 1, ptlist, conlist, idx2verlist, flipqueue);
- }
-
- // Unify segments in 'subsegs', remove redundant segments. Face links
- // of segments are also built.
- unifysegments();
-
- if (b->object == tetgenbehavior::STL) {
- // Remove redundant vertices (for .stl input mesh).
- jettisonnodes();
- }
-
- if (!b->nomerge) {
- // Merge adjacent facets if they are coplanar.
- mergefacets(flipqueue);
- }
-
- delete [] idx2verlist;
- delete flipqueue;
- delete conlist;
- delete ptlist;
-
- return subsegs->items;
-}
-
-//
-// End of surface triangulation routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// interecursive() Recursively do intersection test on a set of triangles.//
-// //
-// Recursively split the set 'subfacearray' of subfaces into two sets using //
-// a cut plane parallel to x-, or, y-, or z-axies. The split criteria are //
-// follows. Assume the cut plane is H, and H+ denotes the left halfspace of //
-// H, and H- denotes the right halfspace of H; and s be a subface: //
-// //
-// (1) If all points of s lie at H+, put it into left array; //
-// (2) If all points of s lie at H-, put it into right array; //
-// (3) If some points of s lie at H+ and some of lie at H-, or some //
-// points lie on H, put it into both arraies. //
-// //
-// Partitions by x-axis if axis == '0'; by y-axis if axis == '1'; by z-axis //
-// if axis == '2'. If current cut plane is parallel to the x-axis, the next //
-// one will be parallel to y-axis, and the next one after the next is z-axis,//
-// and then alternately return back to x-axis. //
-// //
-// Stop splitting when the number of triangles of the input array is not //
-// decreased anymore. Do tests on the current set. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-interecursive(shellface** subfacearray, int arraysize, int axis, REAL bxmin,
- REAL bxmax, REAL bymin, REAL bymax, REAL bzmin, REAL bzmax,
- int* internum)
-{
- shellface **leftarray, **rightarray;
- face sface1, sface2;
- point p1, p2, p3;
- point p4, p5, p6;
- enum intersectresult intersect;
- REAL split;
- bool toleft, toright;
- int leftsize, rightsize;
- int i, j;
-
- if (b->verbose > 1) {
- printf(" Recur %d faces. Bbox (%g, %g, %g),(%g, %g, %g). %s-axis\n",
- arraysize, bxmin, bymin, bzmin, bxmax, bymax, bzmax,
- axis == 0 ? "x" : (axis == 1 ? "y" : "z"));
- }
-
- leftarray = new shellface*[arraysize];
- if (leftarray == NULL) {
- printf("Error in interecursive(): Insufficient memory.\n");
- exit(1);
- }
- rightarray = new shellface*[arraysize];
- if (rightarray == NULL) {
- printf("Error in interecursive(): Insufficient memory.\n");
- exit(1);
- }
- leftsize = rightsize = 0;
-
- if (axis == 0) {
- // Split along x-axis.
- split = 0.5 * (bxmin + bxmax);
- } else if (axis == 1) {
- // Split along y-axis.
- split = 0.5 * (bymin + bymax);
- } else {
- // Split along z-axis.
- split = 0.5 * (bzmin + bzmax);
- }
-
- for (i = 0; i < arraysize; i++) {
- sface1.sh = subfacearray[i];
- p1 = (point) sface1.sh[3];
- p2 = (point) sface1.sh[4];
- p3 = (point) sface1.sh[5];
- toleft = toright = false;
- if (p1[axis] < split) {
- toleft = true;
- if (p2[axis] >= split || p3[axis] >= split) {
- toright = true;
- }
- } else if (p1[axis] > split) {
- toright = true;
- if (p2[axis] <= split || p3[axis] <= split) {
- toleft = true;
- }
- } else {
- // p1[axis] == split;
- toleft = true;
- toright = true;
- }
- // At least one is true;
- assert(!(toleft == false && toright == false));
- if (toleft) {
- leftarray[leftsize] = sface1.sh;
- leftsize++;
- }
- if (toright) {
- rightarray[rightsize] = sface1.sh;
- rightsize++;
- }
- }
-
- if (leftsize < arraysize && rightsize < arraysize) {
- // Continue to partition the input set. Now 'subfacearray' has been
- // split into two sets, it's memory can be freed. 'leftarray' and
- // 'rightarray' will be freed in the next recursive (after they're
- // partitioned again or performing tests).
- delete [] subfacearray;
- // Continue to split these two sets.
- if (axis == 0) {
- interecursive(leftarray, leftsize, 1, bxmin, split, bymin, bymax,
- bzmin, bzmax, internum);
- interecursive(rightarray, rightsize, 1, split, bxmax, bymin, bymax,
- bzmin, bzmax, internum);
- } else if (axis == 1) {
- interecursive(leftarray, leftsize, 2, bxmin, bxmax, bymin, split,
- bzmin, bzmax, internum);
- interecursive(rightarray, rightsize, 2, bxmin, bxmax, split, bymax,
- bzmin, bzmax, internum);
- } else {
- interecursive(leftarray, leftsize, 0, bxmin, bxmax, bymin, bymax,
- bzmin, split, internum);
- interecursive(rightarray, rightsize, 0, bxmin, bxmax, bymin, bymax,
- split, bzmax, internum);
- }
- } else {
- if (b->verbose > 1) {
- printf(" Checking intersecting faces.\n");
- }
- // Perform a brute-force compare on the set.
- for (i = 0; i < arraysize; i++) {
- sface1.sh = subfacearray[i];
- p1 = (point) sface1.sh[3];
- p2 = (point) sface1.sh[4];
- p3 = (point) sface1.sh[5];
- for (j = i + 1; j < arraysize; j++) {
- sface2.sh = subfacearray[j];
- p4 = (point) sface2.sh[3];
- p5 = (point) sface2.sh[4];
- p6 = (point) sface2.sh[5];
- intersect = triangle_triangle_inter(p1, p2, p3, p4, p5, p6);
- if (intersect == INTERSECT || intersect == SHAREFACE) {
- if (!b->quiet) {
- if (intersect == INTERSECT) {
- printf(" Facet #%d intersects facet #%d at triangles:\n",
- shellmark(sface1), shellmark(sface2));
- printf(" (%4d, %4d, %4d) and (%4d, %4d, %4d)\n",
- pointmark(p1), pointmark(p2), pointmark(p3),
- pointmark(p4), pointmark(p5), pointmark(p6));
- } else {
- printf(" Facet #%d duplicates facet #%d at triangle:\n",
- shellmark(sface1), shellmark(sface2));
- printf(" (%4d, %4d, %4d)\n", pointmark(p1), pointmark(p2),
- pointmark(p3));
- }
- }
- // Increase the number of intersecting pairs.
- (*internum)++;
- // Infect these two faces (although they may already be infected).
- sinfect(sface1);
- sinfect(sface2);
- }
- }
- }
- // Don't forget to free all three arrays. No further partition.
- delete [] leftarray;
- delete [] rightarray;
- delete [] subfacearray;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// detectinterfaces() Detect intersecting triangles. //
-// //
-// Given a set of triangles, find the pairs of intersecting triangles from //
-// them. Here the set of triangles is in 'subfaces' which is a surface mesh //
-// of a PLC (.poly or .smesh). //
-// //
-// To detect whether or not two triangles are intersecting is done by the //
-// routine 'triangle_triangle_inter()'. The algorithm for the test is very //
-// simple and stable. It is based on geometric orientation test which uses //
-// exact arithmetics. //
-// //
-// Use divide-and-conquer algorithm for reducing the number of intersection //
-// tests. Start from the bounding box of the input point set, recursively //
-// partition the box into smaller boxes, until the number of triangles in a //
-// box is not decreased anymore. Then perform triangle-triangle tests on the //
-// remaining set of triangles. The memory allocated in the input set is //
-// freed immediately after it has been partitioned into two arrays. So it //
-// can be re-used for the consequent partitions. //
-// //
-// On return, pool 'subfaces' will be cleared, and only the intersecting //
-// triangles remain for output (to a .face file). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::detectinterfaces()
-{
- shellface **subfacearray;
- face shloop;
- int internum;
- int i;
-
- if (!b->quiet) {
- printf("Detecting intersecting facets.\n");
- }
-
- // Construct a map from indices to subfaces;
- subfacearray = new shellface*[subfaces->items];
- subfaces->traversalinit();
- shloop.sh = shellfacetraverse(subfaces);
- i = 0;
- while (shloop.sh != (shellface *) NULL) {
- subfacearray[i] = shloop.sh;
- shloop.sh = shellfacetraverse(subfaces);
- i++;
- }
-
- internum = 0;
- // Recursively split the set of triangles into two sets using a cut plane
- // parallel to x-, or, y-, or z-axies. Stop splitting when the number
- // of subfaces is not decreasing anymore. Do tests on the current set.
- interecursive(subfacearray, subfaces->items, 0, xmin, xmax, ymin, ymax,
- zmin, zmax, &internum);
-
- if (!b->quiet) {
- if (internum > 0) {
- printf("\n!! Found %d pairs of faces are intersecting.\n\n", internum);
- } else {
- printf("\nNo faces are intersecting.\n\n");
- }
- }
-
- if (internum > 0) {
- // Traverse all subfaces, deallocate those have not been infected (they
- // are not intersecting faces). Uninfect those have been infected.
- // After this loop, only intersecting faces remain.
- subfaces->traversalinit();
- shloop.sh = shellfacetraverse(subfaces);
- while (shloop.sh != (shellface *) NULL) {
- if (sinfected(shloop)) {
- suninfect(shloop);
- } else {
- shellfacedealloc(subfaces, shloop.sh);
- }
- shloop.sh = shellfacetraverse(subfaces);
- }
- } else {
- // Deallocate all subfaces.
- subfaces->restart();
- }
-}
-
-//
-// Begin of segments recovery routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// markacutevertices() Set the proper type (ACUTEVERTEX, NONACUTEVERTEX) //
-// for segment vertices. //
-// //
-// Parameter 'acuteangle' gives the upperbound (in degree). Angles which are //
-// smaller or equal than it are assumed as acute angles. A vertex is acute //
-// if at least two segments incident at it with an acute angle. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::markacutevertices(REAL acuteangle)
-{
- shellface** segsperverlist;
- face segloop, workseg, inciseg;
- point eorg, edest, eapex;
- REAL cosbound, anglearc;
- REAL v1[3], v2[3], L, D;
- bool isacute;
- int* idx2seglist;
- int idx, i, j, k;
-
- if (b->verbose) {
- printf(" Marking segments have acute corners.\n");
- }
-
- // Constructing a map from vertex to segments.
- makesegmentmap(idx2seglist, segsperverlist);
-
- // Initialize all vertices be unknown.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- // Check and set types for the two ends of this segment.
- for (segloop.shver = 0; segloop.shver < 2; segloop.shver++) {
- eorg = sorg(segloop);
- setpointtype(eorg, FACETVERTEX);
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
-
- anglearc = acuteangle * 3.1415926535897932 / 180.0;
- cosbound = cos(anglearc);
-
- // Loop over the set of subsegments.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- // Check and set types for the two ends of this segment.
- for (segloop.shver = 0; segloop.shver < 2; segloop.shver++) {
- eorg = sorg(segloop);
- if ((pointtype(eorg) != ACUTEVERTEX) &&
- (pointtype(eorg) != NONACUTEVERTEX)) {
- // This vertex has no type be set yet.
- idx = pointmark(eorg) - in->firstnumber;
- isacute = false;
- for (i = idx2seglist[idx]; i < idx2seglist[idx + 1] && !isacute; i++) {
- workseg.sh = segsperverlist[i];
- workseg.shver = 0;
- if (sorg(workseg) != eorg) {
- sesymself(workseg);
- }
- assert(sorg(workseg) == eorg);
- edest = sdest(workseg);
- for (j = i + 1; j < idx2seglist[idx + 1] && !isacute; j++) {
- inciseg.sh = segsperverlist[j];
- inciseg.shver = 0;
- assert(inciseg.sh != workseg.sh);
- if (sorg(inciseg) != eorg) {
- sesymself(inciseg);
- }
- assert(sorg(inciseg) == eorg);
- eapex = sdest(inciseg);
- // Check angles between segs (eorg, edest) and (eorg, eapex).
- for (k = 0; k < 3; k++) {
- v1[k] = edest[k] - eorg[k];
- v2[k] = eapex[k] - eorg[k];
- }
- L = sqrt(v1[0] * v1[0] + v1[1] * v1[1] + v1[2] * v1[2]);
- for (k = 0; k < 3; k++) v1[k] /= L;
- L = sqrt(v2[0] * v2[0] + v2[1] * v2[1] + v2[2] * v2[2]);
- for (k = 0; k < 3; k++) v2[k] /= L;
- D = v1[0] * v2[0] + v1[1] * v2[1] + v1[2] * v2[2];
- if (D >= cosbound) {
- isacute = true;
- }
- }
- }
- if (isacute) {
- setpointtype(eorg, ACUTEVERTEX);
- } else {
- setpointtype(eorg, NONACUTEVERTEX);
- }
- }
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
-
- delete [] idx2seglist;
- delete [] segsperverlist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// finddirection() Find the first tetrahedron on the path from one point //
-// to another. //
-// //
-// Find the tetrahedron that intersects a line segment L (from the origin of //
-// 'searchtet' to the point 'tend'), and returns the result in 'searchtet'. //
-// The origin of 'searchtet' does not change, even though the tetrahedron //
-// returned may differ from the one passed in. This routine is used to find //
-// the direction to move in to get from one point to another. //
-// //
-// The return value notes the location of the line segment L with respect to //
-// 'searchtet': //
-// - Returns RIGHTCOLLINEAR indicates L is collinear with the line segment //
-// from the origin to the destination of 'searchtet'. //
-// - Returns LEFTCOLLINEAR indicates L is collinear with the line segment //
-// from the origin to the apex of 'searchtet'. //
-// - Returns TOPCOLLINEAR indicates L is collinear with the line segment //
-// from the origin to the opposite of 'searchtet'. //
-// - Returns ACROSSEDGE indicates L intersects with the line segment from //
-// the destination to the apex of 'searchtet'. //
-// - Returns ACROSSFACE indicates L intersects with the face opposite to //
-// the origin of 'searchtet'. //
-// - Returns BELOWHULL indicates L crosses outside the mesh domain. This //
-// can only happen when the domain is non-convex. //
-// //
-// NOTE: This routine only works correctly when the mesh is exactly Delaunay.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-enum tetgenmesh::finddirectionresult tetgenmesh::
-finddirection(triface *searchtet, point tend)
-{
- triface neightet;
- point tstart, tdest, tapex, toppo;
- REAL ori1, ori2, ori3;
-
- tstart = org(*searchtet);
- assert(tstart != tend);
- adjustedgering(*searchtet, CCW);
- if (tstart != org(*searchtet)) {
- enextself(*searchtet); // For keeping the same origin.
- }
- tdest = dest(*searchtet);
- if (tdest == tend) {
- return RIGHTCOLLINEAR;
- }
- tapex = apex(*searchtet);
- if (tapex == tend) {
- return LEFTCOLLINEAR;
- }
-
- ori1 = orient3d(tstart, tdest, tapex, tend);
- if (ori1 > 0.0) {
- // 'tend' is below the face, get the neighbor of this side.
- sym(*searchtet, neightet);
- if (neightet.tet != dummytet) {
- findorg(&neightet, tstart);
- adjustedgering(neightet, CCW);
- if (org(neightet) != tstart) {
- enextself(neightet); // keep the same origin.
- }
- // Set the changed configuratiuon.
- *searchtet = neightet;
- ori1 = -1.0;
- tdest = dest(*searchtet);
- tapex = apex(*searchtet);
- } else {
- // A hull face. Only possible for a nonconvex mesh.
-#ifdef SELF_CHECK
- assert(nonconvex);
-#endif
- return BELOWHULL;
- }
- }
-
- // Repeatedly change the 'searchtet', remain 'tstart' be its origin, until
- // find a tetrahedron contains 'tend' or is crossed by the line segment
- // from 'tstart' to 'tend'.
- while (true) {
- toppo = oppo(*searchtet);
- if (toppo == tend) {
- return TOPCOLLINEAR;
- }
- ori2 = orient3d(tstart, toppo, tdest, tend);
- if (ori2 > 0.0) {
- // 'tend' is below the face, get the neighbor at this side.
- fnext(*searchtet, neightet);
- symself(neightet);
- if (neightet.tet != dummytet) {
- findorg(&neightet, tstart);
- adjustedgering(neightet, CCW);
- if (org(neightet) != tstart) {
- enextself(neightet); // keep the same origin.
- }
- // Set the changed configuration.
- *searchtet = neightet;
- ori1 = -1.0;
- tdest = dest(*searchtet);
- tapex = apex(*searchtet);
- // Continue the search from the changed 'searchtet'.
- continue;
- } else {
- // A hull face. Only possible for a nonconvex mesh.
-#ifdef SELF_CHECK
- assert(nonconvex);
-#endif
- return BELOWHULL;
- }
- }
- ori3 = orient3d(tapex, toppo, tstart, tend);
- if (ori3 > 0.0) {
- // 'tend' is below the face, get the neighbor at this side.
- enext2fnext(*searchtet, neightet);
- symself(neightet);
- if (neightet.tet != dummytet) {
- findorg(&neightet, tstart);
- adjustedgering(neightet, CCW);
- if (org(neightet) != tstart) {
- enextself(neightet); // keep the same origin.
- }
- // Set the changed configuration.
- *searchtet = neightet;
- ori1 = -1.0;
- tdest = dest(*searchtet);
- tapex = apex(*searchtet);
- // Continue the search from the changed 'searchtet'.
- continue;
- } else {
- // A hull face. Only possible for a nonconvex mesh.
-#ifdef SELF_CHECK
- assert(nonconvex);
-#endif
- return BELOWHULL;
- }
- }
- // Now 'ori1', 'ori2' and 'ori3' are possible be 0.0 or all < 0.0;
- if (ori1 < 0.0) {
- // Possible cases are: ACROSSFACE, ACROSSEDGE, TOPCOLLINEAR.
- if (ori2 < 0.0) {
- if (ori3 < 0.0) {
- return ACROSSFACE;
- } else { // ori3 == 0.0;
- // Cross edge (apex, oppo)
- enext2fnextself(*searchtet);
- esymself(*searchtet); // org(*searchtet) == tstart;
- return ACROSSEDGE;
- }
- } else { // ori2 == 0.0;
- if (ori3 < 0.0) {
- // Cross edge (dest, oppo)
- fnextself(*searchtet);
- esymself(*searchtet);
- enextself(*searchtet); // org(*searchtet) == tstart;
- return ACROSSEDGE;
- } else { // ori3 == 0.0;
- // Collinear with edge (org, oppo)
- return TOPCOLLINEAR;
- }
- }
- } else { // ori1 == 0.0;
- // Possible cases are: RIGHTCOLLINEAR, LEFTCOLLINEAR, ACROSSEDGE.
- if (ori2 < 0.0) {
- if (ori3 < 0.0) {
- // Cross edge (tdest, tapex)
- return ACROSSEDGE;
- } else { // ori3 == 0.0
- // Collinear with edge (torg, tapex)
- return LEFTCOLLINEAR;
- }
- } else { // ori2 == 0.0;
- assert(ori3 != 0.0);
- // Collinear with edge (torg, tdest)
- return RIGHTCOLLINEAR;
- }
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getsearchtet() Find a tetrahedron whose origin is either 'p1' or 'p2'. //
-// //
-// On return, the origin of 'searchtet' is either 'p1' or 'p2', and 'tend' //
-// returns the other point. 'searchtet' serves as the starting tetrahedron //
-// for searching of the line segment from 'p1' to 'p2' or vice versa. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-getsearchtet(point p1, point p2, triface* searchtet, point* tend)
-{
- tetrahedron encodedtet1, encodedtet2;
-
- // Is there a valid handle provided by the user?
- if ((searchtet->tet != (tetrahedron *) NULL) && !isdead(searchtet)) {
- // Find which endpoint the handle holds.
- if (findorg(searchtet, p1)) {
- *tend = p2;
- return;
- } else {
- if (findorg(searchtet, p2)) {
- *tend = p1;
- return;
- }
- }
- }
- // If not, search the handle stored in 'p1' or 'p2'.
- *tend = (point) NULL;
- encodedtet1 = point2tet(p1);
- encodedtet2 = point2tet(p2);
- if (encodedtet1 != (tetrahedron) NULL) {
- decode(encodedtet1, *searchtet);
- // Be careful, here 'searchtet' may be dead.
- if (findorg(searchtet, p1)) {
- *tend = p2;
- }
- } else if (encodedtet2 != (tetrahedron) NULL) {
- decode(encodedtet2, *searchtet);
- // Be careful, here 'searchtet' may be dead.
- if (findorg(searchtet, p2)) {
- *tend = p1;
- }
- }
- // If still not, perform a full point location. The starting tetrahedron
- // is chosen as follows: Use the handle stored in 'p1' or 'p2' if it is
- // alive; otherwise, start from a tetrahedron on the convex hull.
- if (*tend == (point) NULL) {
- if (encodedtet1 != (tetrahedron) NULL) {
- decode(encodedtet1, *searchtet);
- // Be careful, here 'searchtet' may be dead.
- }
- if (isdead(searchtet)) {
- if (encodedtet2 != (tetrahedron) NULL) {
- decode(encodedtet2, *searchtet);
- // Be careful, here 'searchtet' may be dead.
- }
- if (isdead(searchtet)) {
- searchtet->tet = dummytet;
- searchtet->loc = 0;
- symself(*searchtet);
- }
- assert(!isdead(searchtet));
- }
- if (locate(p1, searchtet) != ONVERTEX) {
- printf("Internal error in getsearchtet(): Failed to locate point\n");
- printf(" (%.12g, %.12g, %.12g) %d.\n", p1[0], p1[1], p1[2],
- pointmark(p1));
- internalerror();
- }
- // Remember this handle in 'p1' to enhance the search speed.
- setpoint2tet(p1, encode(*searchtet));
- *tend = p2;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// isedgeencroached() Check whether or not a subsegment is encroached by //
-// a given point. //
-// //
-// A segment with endpoints 'p1' and 'p2' is encroached by the point 'testpt'//
-// if it lies in the diametral sphere of this segment. The degenerate case //
-// that 'testpt' lies on the sphere can be treated as either be encroached //
-// or not so. If you want to regard this case as be encroached, set the flag //
-// 'degflag' be TRUE. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-isedgeencroached(point p1, point p2, point testpt, bool degflag)
-{
- REAL dotproduct;
-
- // Check if the segment is facing an angle larger than 90 degree?
- dotproduct = (p1[0] - testpt[0]) * (p2[0] - testpt[0])
- + (p1[1] - testpt[1]) * (p2[1] - testpt[1])
- + (p1[2] - testpt[2]) * (p2[2] - testpt[2]);
- if (dotproduct < 0) {
- return true;
- } else if (dotproduct == 0 && degflag) {
- return true;
- } else {
- return false;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// scoutrefpoint() Search the reference point of a missing segment. //
-// //
-// A segment S is missing in current Delaunay tetrahedralization DT and will //
-// be split by inserting a point V in it. The two end points of S are the //
-// origin of 'searchtet' and 'tend'. And we know that S is crossing the face //
-// of 'searchtet' opposite to its origin (may be intersecting with the edge //
-// from the destination to the apex of the 'searchtet'). The search of P is //
-// completed by walking through all faces of DT across by S. //
-// //
-// The reference point P of S is an existing vertex of DT which is 'respon- //
-// sible' for deciding where to insert V. P is chosen as follows: //
-// (1) P encroaches upon S; and //
-// (2) the circumradius of the smallest circumsphere of the triangle //
-// formed by the two endpoints of S and P is maximum over other //
-// encroaching points of S. //
-// The reference point of S may not unique, choose arbitrary one if there're //
-// several points available. //
-// //
-// Warning: This routine is correct when the tetrahedralization is Delaunay //
-// and convex. Otherwise, the search loop may not terminate. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::point tetgenmesh::scoutrefpoint(triface* searchtet, point tend)
-{
- triface checkface;
- point tstart, testpt, refpoint;
- REAL cent[3], radius, largest;
- REAL ahead;
- bool ncollinear;
- int sides;
-
- if (b->verbose > 2) {
- printf(" Scout the reference point of segment (%d, %d).\n",
- pointmark(org(*searchtet)), pointmark(tend));
- }
-
- tstart = org(*searchtet);
- refpoint = (point) NULL;
-
- // Check the three vertices of the crossing face.
- testpt = apex(*searchtet);
- if (isedgeencroached(tstart, tend, testpt, true)) {
- ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
- assert(ncollinear);
- refpoint = testpt;
- largest = radius;
- }
- testpt = dest(*searchtet);
- if (isedgeencroached(tstart, tend, testpt, true)) {
- ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
- assert(ncollinear);
- if (refpoint == (point) NULL) {
- refpoint = testpt;
- largest = radius;
- } else {
- if (radius > largest) {
- refpoint = testpt;
- largest = radius;
- }
- }
- }
- testpt = oppo(*searchtet);
- if (isedgeencroached(tstart, tend, testpt, true)) {
- ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
- assert(ncollinear);
- if (refpoint == (point) NULL) {
- refpoint = testpt;
- largest = radius;
- } else {
- if (radius > largest) {
- refpoint = testpt;
- largest = radius;
- }
- }
- }
- // Check the opposite vertex of the neighboring tet in case the segment
- // crosses the edge (leftpoint, rightpoint) of the crossing face.
- sym(*searchtet, checkface);
- if (checkface.tet != dummytet) {
- testpt = oppo(checkface);
- if (isedgeencroached(tstart, tend, testpt, true)) {
- ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
- assert(ncollinear);
- if (refpoint == (point) NULL) {
- refpoint = testpt;
- largest = radius;
- } else {
- if (radius > largest) {
- refpoint = testpt;
- largest = radius;
- }
- }
- }
- }
-
- // Walk through all crossing faces.
- enextfnext(*searchtet, checkface);
- sym(checkface, *searchtet);
- while (true) {
- // Check if we are reaching the boundary of the triangulation.
- assert(searchtet->tet != dummytet);
- // Search for an adjoining tetrahedron we can walk through.
- searchtet->ver = 0;
- // 'testpt' is the shared vertex for the following orientation tests.
- testpt = oppo(*searchtet);
- if (testpt == tend) {
- // The searching is finished.
- break;
- } else {
- // 'testpt' may encroach the segment.
- if ((testpt != tstart) && (testpt != refpoint)) {
- if (isedgeencroached(tstart, tend, testpt, true)) {
- ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
- if (!ncollinear) {
- // 'testpt' is collinear with the segment. It may happen when a
- // set of collinear and continuous segments is defined by two
- // extreme endpoints. In this case, we should choose 'testpt'
- // as the splitting point immediately. No new point should be
- // created.
- refpoint = testpt;
- break;
- }
- if (refpoint == (point) NULL) {
- refpoint = testpt;
- largest = radius;
- } else {
- if (radius > largest) {
- refpoint = testpt;
- largest = radius;
- }
- }
- }
- }
- }
- // Check three side-faces of 'searchtet' to find the one through
- // which we can walk next.
- for (sides = 0; sides < 3; sides++) {
- fnext(*searchtet, checkface);
- ahead = orient3d(org(checkface), dest(checkface), testpt, tend);
- if (ahead < 0.0) {
- // We can walk through this face and continue the searching.
- sym(checkface, *searchtet);
- break;
- }
- enextself(*searchtet);
- }
- assert (sides < 3);
- }
-
- assert(refpoint != (point) NULL);
- return refpoint;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getsegmentorigin() Return the origin of the (unsplit) segment. //
-// //
-// After a segment (or a subsegment) is split. Two resulting subsegments are //
-// connecting each other through the pointers saved in their data fields. //
-// With these pointers, the whole (unsplit) segment can be found. 'splitseg' //
-// may be a split subsegment. Returns the origin of the unsplit segment. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::point tetgenmesh::getsegmentorigin(face* splitseg)
-{
- face workseg;
- point farorg;
-
- farorg = sorg(*splitseg);
- if ((pointtype(farorg) != ACUTEVERTEX) &&
- (pointtype(farorg) != NONACUTEVERTEX)) {
- workseg = *splitseg;
- do {
- senext2self(workseg);
- spivotself(workseg);
- if (workseg.sh != dummysh) {
- workseg.shver = 0; // It's a subsegment.
- if (sdest(workseg) != farorg) {
- sesymself(workseg);
- assert(sdest(workseg) == farorg);
- }
- farorg = sorg(workseg);
- if ((pointtype(farorg) == ACUTEVERTEX) ||
- (pointtype(farorg) == NONACUTEVERTEX)) break;
- }
- } while (workseg.sh != dummysh);
- }
- assert((pointtype(farorg) == ACUTEVERTEX) ||
- (pointtype(farorg) == NONACUTEVERTEX));
- return farorg;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// getsplitpoint() Get a point for splitting a segment. //
-// //
-// 'splitseg' is the segment will be split. 'refpoint' is a reference point //
-// for splitting this segment. Moreover, it should not collinear with the //
-// splitting segment. (The collinear case will be detected by iscollinear() //
-// before entering this routine.) The calculation of the splitting point is //
-// governed by three rules introduced in my paper. //
-// //
-// After the position is calculated, a new point is created at this location.//
-// The new point has one of the two pointtypes: FREESEGVERTEX indicating it //
-// is an inserting vertex on segment, and NONACUTEVERTEX indicating it is an //
-// endpoint of a segment which original has type-3 now becomes type-2. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::point tetgenmesh::getsplitpoint(face* splitseg, point refpoint)
-{
- point splitpoint;
- point farorg, fardest;
- point ei, ej, ek, c;
- REAL v[3], r, split;
- bool acuteorg, acutedest;
- int stype, ptmark;
- int i;
-
- // First determine the type of the segment (type-1, type-2, or type-3).
- farorg = getsegmentorigin(splitseg);
- acuteorg = (pointtype(farorg) == ACUTEVERTEX);
- sesymself(*splitseg);
- fardest = getsegmentorigin(splitseg);
- acutedest = (pointtype(fardest) == ACUTEVERTEX);
- sesymself(*splitseg);
-
- if (acuteorg) {
- if (acutedest) {
- stype = 3;
- } else {
- stype = 2;
- ek = farorg;
- }
- } else {
- if (acutedest) {
- stype = 2;
- // Adjust splitseg, so that its origin is acute.
- sesymself(*splitseg);
- ek = fardest;
- } else {
- stype = 1;
- }
- }
- ei = sorg(*splitseg);
- ej = sdest(*splitseg);
-
- if (b->verbose > 1) {
- printf(" Splitting segment (%d, %d) type-%d with refpoint %d.\n",
- pointmark(ei), pointmark(ej), stype, pointmark(refpoint));
- }
-
- if (stype == 1 || stype == 3) {
- // Use rule-1.
- REAL eij, eip, ejp;
- eij = distance(ei, ej);
- eip = distance(ei, refpoint);
- ejp = distance(ej, refpoint);
- if ((eip < ejp) && (eip < 0.5 * eij)) {
- c = ei;
- r = eip;
- } else if ((eip > ejp) && (ejp < 0.5 * eij)) {
- c = ej;
- ej = ei;
- r = ejp;
- } else {
- c = ei;
- r = 0.5 * eij;
- }
- split = r / eij;
- for (i = 0; i < 3; i++) {
- v[i] = c[i] + split * (ej[i] - c[i]);
- }
- } else {
- // Use rule-2 or rule-3.
- REAL eki, ekj, ekp, evj, evp, eiv;
- c = ek;
- eki = distance(ek, ei); // eki may equal zero.
- ekj = distance(ek, ej);
- ekp = distance(ek, refpoint);
- // Calculate v (the going to split position between ei, ej).
- r = ekp;
- assert(eki < r && r < ekj);
- split = r / ekj;
- for (i = 0; i < 3; i++) {
- v[i] = c[i] + split * (ej[i] - c[i]);
- }
- evj = ekj - r; // distance(v, ej);
- evp = distance(v, refpoint);
- if (evj < evp) {
- // v is rejected, use rule-3.
- eiv = distance(ei, v);
- if (evp <= 0.5 * eiv) {
- r = eki + eiv - evp;
- } else {
- r = eki + 0.5 * eiv;
- }
- assert(eki < r && r < ekj);
- split = r / ekj;
- for (i = 0; i < 3; i++) {
- v[i] = c[i] + split * (ej[i] - c[i]);
- }
- if (b->verbose > 1) {
- printf(" Using rule-3.\n");
- }
- }
- }
-
- if (b->verbose > 1) {
- if (stype == 2) {
- printf(" Split = %.12g.\n", distance(ei, v) / distance(ei, ej));
- } else {
- printf(" Split = %.12g.\n", distance(c, v) / distance(c, ej));
- }
- }
-
- // Allocate a point from points.
- splitpoint = (point) points->alloc();
- // Set its coordinates.
- for (i = 0; i < 3; i++) {
- splitpoint[i] = v[i];
- }
- // Interpolate its attributes.
- for (i = 0; i < in->numberofpointattributes; i++) {
- splitpoint[i + 3] = c[i + 3] + split * (ej[i + 3] - c[i + 3]);
- }
- // Remember the index (starts from 'in->firstnumber') of this vertex.
- ptmark = (int) points->items - (in->firstnumber == 1 ? 0 : 1);
- setpointmark(splitpoint, ptmark);
- if (stype == 3) {
- // Change a type-3 segment into two type-2 segments.
- setpointtype(splitpoint, NONACUTEVERTEX);
- } else {
- // Set it's type be FREESEGVERTEX.
- setpointtype(splitpoint, FREESEGVERTEX);
- }
- // Init this field.
- setpoint2tet(splitpoint, NULL);
-
- return splitpoint;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// delaunizesegments() Split segments repeatedly until they appear in a //
-// Delaunay tetrahedralization together. //
-// //
-// Given a PLC X, which has a set V of vertices and a set of segments. Start //
-// from a Delaunay tetrahedralization D of V, this routine recovers segments //
-// of X in D by incrementally inserting points on missing segments, updating //
-// D with the newly inserted points into D', which remains to be a Delaunay //
-// tetrahedralization and respects the segments of X. Hence, each segment of //
-// X appears as a union of edges in D'. //
-// //
-// This routine dynamically maintains two meshes, one is DT, another is the //
-// surface mesh F of X. DT and F have exactly the same vertices. They are //
-// updated simultaneously with the newly inserted points. //
-// //
-// Missing segments are found by looping the set S of segments, checking the //
-// existence of each segment in DT. Once a segment is found missing in DT, //
-// it is split into two subsegments by inserting a point into both DT and F, //
-// and S is updated accordingly. However, the inserted point may cause some //
-// other existing segments be non-Delaunay, hence are missing from the DT. //
-// In order to force all segments to appear in DT, we have to loop S again //
-// after some segments are split. (A little ugly method) Use a handle to //
-// remember the last segment be split in one loop, hence all segments after //
-// it are existing and need not be checked. //
-// //
-// In priciple, a segment on the convex hull should exist in DT. However, if //
-// there are four coplanar points on the convex hull, and the DT only can //
-// contain one diagonal edge which is unfortunately not the segment, then it //
-// is missing. During the recovery of the segment, it is possible that the //
-// calculated inserting point for recovering this convex hull segment is not //
-// exact enough and lies (slightly) outside the DT. In order to insert the //
-// point, we enlarge the convex hull of the DT, so it can contain the point //
-// and remains convex. 'inserthullsite()' is called under this case. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::delaunizesegments()
-{
- queue *flipqueue;
- triface searchtet;
- face segloop, lastsplit;
- face splitsh;
- point p1, p2;
- point tend, checkpoint;
- point refpoint, splitpoint;
- enum finddirectionresult collinear;
- enum insertsiteresult success;
- bool finish;
-
- if (!b->quiet) {
- printf("Delaunizing segments.\n");
- }
-
- // Mark segment vertices (acute or not) for determining segment types.
- markacutevertices(60.0);
- // Construct a map from points to tetrahedra for speeding point location.
- makepoint2tetmap();
- // Initialize a queue for returning non-Delaunay faces and edges.
- flipqueue = new queue(sizeof(badface));
- // 'lastsplit' is the last segment be split in one loop, all segments
- // after it are existing. At first, set it be NULL;
- lastsplit.sh = (shellface *) NULL;
-
- finish = false;
- while (!finish && (steinerleft != 0)) {
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while ((segloop.sh != (shellface *) NULL) && (steinerleft != 0)) {
- // Search the segment in DT.
- p1 = sorg(segloop);
- p2 = sdest(segloop);
- if (b->verbose > 2) {
- printf(" Checking segment (%d, %d).\n", pointmark(p1), pointmark(p2));
- }
- getsearchtet(p1, p2, &searchtet, &tend);
- collinear = finddirection(&searchtet, tend);
- if (collinear == LEFTCOLLINEAR) {
- checkpoint = apex(searchtet);
- } else if (collinear == RIGHTCOLLINEAR) {
- checkpoint = dest(searchtet);
- } else if (collinear == TOPCOLLINEAR) {
- checkpoint = oppo(searchtet);
- } else {
- assert(collinear == ACROSSFACE || collinear == ACROSSEDGE);
- checkpoint = (point) NULL;
- }
- if (checkpoint != tend) {
- // The segment is missing.
- if (checkpoint != (point) NULL) {
- splitpoint = checkpoint;
- } else {
- refpoint = scoutrefpoint(&searchtet, tend);
- if (iscollinear(p1, p2, refpoint, b->epsilon)) {
- splitpoint = refpoint;
- } else {
- splitpoint = getsplitpoint(&segloop, refpoint);
- // Insert 'splitpoint' into DT.
- success = insertsite(splitpoint, &searchtet, false, flipqueue);
- if (success == OUTSIDEPOINT) {
- // A convex hull edge is mssing, and the inserting point lies
- // (slightly) outside the convex hull due to the significant
- // digits lost in the calculation. Enlarge the convex hull.
- inserthullsite(splitpoint, &searchtet, flipqueue, NULL, NULL);
- }
- if (steinerleft > 0) steinerleft--;
- // Remember a handle in 'splitpoint' to enhance the speed of
- // consequent point location.
- setpoint2tet(splitpoint, encode(searchtet));
- // Maintain Delaunayness in DT.
- flip(flipqueue, NULL);
- }
- }
- // Insert 'splitpoint' into F.
- spivot(segloop, splitsh);
- splitsubedge(splitpoint, &splitsh, flipqueue);
- flipsub(flipqueue);
- // Remember 'segloop'.
- lastsplit = segloop;
- } else {
- // The segment exists.
- if (segloop.sh == lastsplit.sh) {
- finish = true;
- break;
- }
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
- if (lastsplit.sh == (shellface *) NULL) {
- // No missing segment!
- finish = true;
- }
- }
-
- delete flipqueue;
-}
-
-//
-// End of segments recovery routines
-//
-
-//
-// Begin of constrained Delaunay triangulation routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insertsubface() Insert a subface into the Delaunay tetrahedralization. //
-// //
-// Search the subface in current Delaunay tetrahedralization. Return TRUE if //
-// the subface exists, i.e., it appears as a face of the DT and is inserted. //
-// Otherwise, return FALSE indicating it is a missing face. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::insertsubface(face* insertsh, triface* searchtet)
-{
- triface spintet, symtet;
- face testsh, testseg;
- face spinsh, casin, casout;
- point tapex, checkpoint;
- enum finddirectionresult collinear;
- int hitbdry;
-
- // Search one edge of 'insertsh'.
- getsearchtet(sorg(*insertsh), sdest(*insertsh), searchtet, &checkpoint);
- collinear = finddirection(searchtet, checkpoint);
- if (collinear == LEFTCOLLINEAR) {
- enext2self(*searchtet);
- esymself(*searchtet);
- } else if (collinear == TOPCOLLINEAR) {
- fnextself(*searchtet);
- enext2self(*searchtet);
- esymself(*searchtet);
- }
- if (dest(*searchtet) != checkpoint) {
- // The edge is missing => subface is missing.
- return false;
- }
-
- // Spin around the edge (torg, tdest), look for a face containing tapex.
- tapex = sapex(*insertsh);
- spintet = *searchtet;
- hitbdry = 0;
- do {
- if (apex(spintet) == tapex) {
- // The subface is exist in DT. We will insert this subface. Before
- // insertion, make sure there is no subface at this position.
- tspivot(spintet, testsh);
- if (testsh.sh == dummysh) {
- adjustedgering(spintet, CCW);
- findedge(insertsh, org(spintet), dest(spintet));
- tsbond(spintet, *insertsh);
- sym(spintet, symtet); // 'symtet' maybe outside, use it anyway.
- sesymself(*insertsh);
- tsbond(symtet, *insertsh);
- } else {
- // There already exists one subface. They're Duplicated.
- printf("Warning: Two subfaces are found duplicated at ");
- printf("(%d, %d, %d)\n", pointmark(sorg(testsh)),
- pointmark(sdest(testsh)), pointmark(sapex(testsh)));
- printf(" The one of facet #%d is ignored.\n", shellmark(*insertsh));
- // printf(" Hint: -d switch can find all duplicated facets.\n");
- }
- return true;
- }
- if (!fnextself(spintet)) {
- hitbdry ++;
- if (hitbdry < 2) {
- esym(*searchtet, spintet);
- if (!fnextself(spintet)) {
- hitbdry ++;
- }
- }
- }
- } while (hitbdry < 2 && apex(spintet) != apex(*searchtet));
-
- // The face is missing.
- return false;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tritritest() Test if two triangles are intersecting in their interior. //
-// //
-// One triangles is represented by 'checktet', the other is given by three //
-// corners 'p1', 'p2' and 'p3'. This routine calls triangle_triangle_inter() //
-// to detect whether or not these two triangles are exactly intersecting in //
-// their interior (excluding the cases share a vertex, share an edge, or are //
-// coincide). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::tritritest(triface* checktet, point p1, point p2, point p3)
-{
- point forg, fdest, fapex;
- enum intersectresult intersect;
-
- forg = org(*checktet);
- fdest = dest(*checktet);
- fapex = apex(*checktet);
-
-#ifdef SELF_CHECK
- REAL ax, ay, az, bx, by, bz;
- REAL n[3];
- // face (torg, tdest, tapex) should not be degenerate. However p1, p2,
- // and p3 may be collinear. Check it.
- ax = forg[0] - fdest[0];
- ay = forg[1] - fdest[1];
- az = forg[2] - fdest[2];
- bx = forg[0] - fapex[0];
- by = forg[1] - fapex[1];
- bz = forg[2] - fapex[2];
- n[0] = ay * bz - by * az;
- n[1] = az * bx - bz * ax;
- n[2] = ax * by - bx * ay;
- assert(fabs(n[0]) + fabs(n[1]) + fabs(n[2]) > 0.0);
- // The components of n should not smaller than the machine epsilon.
-
- ax = p1[0] - p2[0];
- ay = p1[1] - p2[1];
- az = p1[2] - p2[2];
- bx = p1[0] - p3[0];
- by = p1[1] - p3[1];
- bz = p1[2] - p3[2];
- n[0] = ay * bz - by * az;
- n[1] = az * bx - bz * ax;
- n[2] = ax * by - bx * ay;
- assert(fabs(n[0]) + fabs(n[1]) + fabs(n[2]) > 0.0);
- // The components of n should not smaller than the machine epsilon.
-#endif
-
- intersect = triangle_triangle_inter(forg, fdest, fapex, p1, p2, p3);
- return intersect == INTERSECT;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// initializecavity() Create the initial fronts. //
-// //
-// 'floorlist' is a list of coplanar subfaces, they are oriented in the same //
-// direction pointing to the ceiling. 'ceilinglist' is a list of faces of //
-// tetrahedra which are crossing the cavity, they form the rest part of the //
-// boundary of the cavity. 'frontlink' is used to return the list of fronts, //
-// it is empty on input. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-initializecavity(list* floorlist, list* ceillist, list* floorptlist,
- list* ceilptlist, link* frontlink, link* ptlink)
-{
- triface neightet, casingtet;
- triface faketet;
- face worksh;
- int i;
-
- // First add all faces in 'floorlist' into 'frontlink'.
- for (i = 0; i < floorlist->len(); i++) {
- worksh = * (face *)(* floorlist)[i];
- // Current side of 'worksh' should be empty.
- stpivot(worksh, neightet);
- assert(neightet.tet == dummytet);
- // Check another side, if there is no tetrahedron, create a 'fake'
- // tetrahedron in order to hold this side. It will be removed
- // during filling the cavity.
- sesymself(worksh);
- stpivot(worksh, casingtet);
- if (casingtet.tet == dummytet) {
- maketetrahedron(&faketet);
- setorg(faketet, sorg(worksh));
- setdest(faketet, sdest(worksh));
- setapex(faketet, sapex(worksh));
- setoppo(faketet, (point) NULL); // Indicates it is 'fake'.
- tsbond(faketet, worksh);
- frontlink->add(&faketet);
- } else {
- frontlink->add(&casingtet);
- }
- }
- // Second add all casing faces in 'ceilinglist' into 'frontlink'.
- for (i = 0; i < ceillist->len(); i++) {
- neightet = * (triface *) (* ceillist)[i];
- // The ceil is a face of cavity tetrahedron (going to be deleted).
- assert(infected(neightet));
- sym(neightet, casingtet);
- if (casingtet.tet == dummytet) {
- // This side is on the hull. Create a 'fake' tetrahedron in order to
- // hold this side. It will be removed during filling the cavity.
- tspivot(neightet, worksh);
- maketetrahedron(&faketet);
- setorg(faketet, org(neightet));
- setdest(faketet, dest(neightet));
- setapex(faketet, apex(neightet));
- setoppo(faketet, (point) NULL); // Indicates it is 'fake'.
- if (worksh.sh != dummysh) {
- sesymself(worksh);
- tsbond(faketet, worksh);
- }
- frontlink->add(&faketet);
- } else {
- frontlink->add(&casingtet);
- }
- }
- // Put points in 'equatptlist' and 'ceilptlist' into 'ptlink'.
- for (i = 0; i < floorptlist->len(); i++) {
- ptlink->add((point *)(* floorptlist)[i]);
- }
- for (i = 0; i < ceilptlist->len(); i++) {
- ptlink->add((point *)(* ceilptlist)[i]);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// reducecavity() Reduce the cavity by chopping off tetrahedra formed by //
-// faces in 'frontlink' without creating new edges. //
-// //
-// When a face of cavity has three neighbors which are sharing a same vertex,//
-// form a tetrahedron from the face and the vertex, consequently, four faces //
-// of the cavity are removed. If only two of its three neighbors share a //
-// common vertex, it only can form a tetrahedron when no vertex of the //
-// cavity lies inside the tetrahedorn, consequently, three faces are removed //
-// from the cavity and a face(at the open side) becomes a face of the cavity.//
-// //
-// Not every face of the cavity can be removed by this way. This routine //
-// returns when there is no face can be removed. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::reducecavity(link* frontlink, link* ptlink, queue* flipqueue)
-{
- triface front, *neigh[3], *checkface;
- triface newtet, newface;
- face checksh;
- point *ploop;
- point forg, fdest;
- point workpt[3], shareoppo;
- REAL sign;
- bool isneighbor, isconvex;
- int loopcount, share;
- int i, j, k;
-
- if (b->verbose > 2) {
- printf(" Reducecavity: %d faces.\n", (int) frontlink->len());
- }
-
- loopcount = 0;
- while (loopcount < frontlink->len()) {
- // Get and remove a front face from 'fronlink'.
- front = * (triface *) frontlink->del(1);
- // Make the front point to insde the cavity.
- adjustedgering(front, CW);
- if (b->verbose > 2) {
- printf(" Get front (%d, %d, %d).\n", pointmark(org(front)),
- pointmark(dest(front)), pointmark(apex(front)));
- }
- // Find the three neighbors of 'front' in 'frontlink'. They must exist,
- // because the cavity is closed.
- for (i = 0; i < 3; i++) {
- forg = org(front);
- fdest = dest(front);
- isneighbor = false;
- for (j = 0; j < frontlink->len() && !isneighbor; j++) {
- checkface = (triface *) frontlink->getnitem(j + 1);
- for (k = 0; k < 3; k++) {
- workpt[0] = org(*checkface);
- workpt[1] = dest(*checkface);
- if (workpt[0] == forg) {
- if (workpt[1] == fdest) isneighbor = true;
- } else if (workpt[0] == fdest) {
- if (workpt[1] == forg) isneighbor = true;
- }
- if (isneighbor) {
- neigh[i] = checkface;
- break;
- }
- enextself(*checkface);
- }
- }
- assert(isneighbor);
- enextself(front);
- }
-
- // Find the number of common apexes.
- for (i = 0; i < 3; i++) {
- workpt[i] = apex(*neigh[i]);
- }
- if (workpt[0] == workpt[1]) {
- shareoppo = workpt[0];
- if (workpt[1] == workpt[2]) {
- share = 3;
- } else {
- share = 2;
- }
- } else if (workpt[0] == workpt[2]) {
- shareoppo = workpt[0];
- share = 2;
- } else {
- if (workpt[1] == workpt[2]) {
- shareoppo = workpt[1];
- share = 2;
- } else {
- share = 1;
- }
- }
-
- if (share == 2) {
- // It is possible that the open side is also a cavity face, but not
- // pop up because there are more than two cavity faces sharing the
- // edge. Check is there a cavity face having this edge and having
- // its apex be 'shareoppo'.
- for (i = 0; i < 3; i++) {
- if (workpt[i] != shareoppo) {
- // 'neigh[i]' is the open side. Get the edge.
- forg = org(*neigh[i]);
- fdest = dest(*neigh[i]);
- break;
- }
- }
- assert(i < 3);
- // Search faces containing edge (forg, fdest) in 'frontlist'. If
- // the found face containing 'shareoppo', stop;
- for (j = 0; j < frontlink->len() && share != 3; j++) {
- checkface = (triface *) frontlink->getnitem(j + 1);
- // Skip if it is one of the neighbors.
- if ((checkface == neigh[0]) || (checkface == neigh[1]) ||
- (checkface == neigh[2])) continue;
- isneighbor = false;
- for (k = 0; k < 3; k++) {
- workpt[0] = org(*checkface);
- workpt[1] = dest(*checkface);
- if (workpt[0] == forg) {
- if (workpt[1] == fdest) isneighbor = true;
- } else if (workpt[0] == fdest) {
- if (workpt[1] == forg) isneighbor = true;
- }
- if (isneighbor) {
- if (apex(*checkface) == shareoppo) {
- // Find! Change the old neighbor at this side be this one.
- neigh[i] = checkface;
- share = 3;
- break;
- }
- }
- enextself(*checkface);
- }
- }
- }
-
- isconvex = true;
- if (share == 2 || share == 3) {
- // It is possible to reduce the cavity by constructing a tetrahedron
- // from the face 'front' and 'shareoppo'. However, we have to make
- // sure that this tetrahedron is valid, i.e., shareoppo should lie
- // above front.
- workpt[0] = org(front);
- workpt[1] = dest(front);
- workpt[2] = apex(front);
- sign = orient3d(workpt[0], workpt[1], workpt[2], shareoppo);
- if (sign > 0.0) {
- // It is not a valid tetrahedron, skip to create it.
- isconvex = false;
- } else if (sign == 0.0) {
- // These four points are coplanar. If there are only three faces
- // left, we should stop here. Create a degenerate tetrahedron
- // on these four faces and return. It will be repaired later.
- if (frontlink->len() > 3) {
- isconvex = false;
- }
- }
- }
- if (share == 2 && isconvex) {
- // Check if we can reduce the tetrahedron formed by the front and the
- // shareoppo. The condition is no vertex is inside the tetrahedron.
- for (i = 0; i < ptlink->len() && isconvex; i++) {
- ploop = (point *) ptlink->getnitem(i + 1);
- if (*ploop == workpt[0] || *ploop == workpt[1] || *ploop == workpt[2]
- || *ploop == shareoppo) continue;
- sign = orient3d(workpt[0], workpt[1], workpt[2], *ploop);
- isconvex = sign > 0.0;
- if (isconvex) continue;
- sign = orient3d(workpt[1], workpt[0], shareoppo, *ploop);
- isconvex = sign > 0.0;
- if (isconvex) continue;
- sign = orient3d(workpt[2], workpt[1], shareoppo, *ploop);
- isconvex = sign > 0.0;
- if (isconvex) continue;
- sign = orient3d(workpt[0], workpt[2], shareoppo, *ploop);
- isconvex = sign > 0.0;
- }
- }
-
- if (share == 1 || !isconvex) {
- // Put 'front' back into 'frontlink'.
- frontlink->add(&front);
- loopcount++; // Increase the loop counter.
- continue;
- } else {
- // Find a reducable tetrahedron. Reset the loop counter.
- loopcount = 0;
- }
-
- if (b->verbose > 2) {
- for (i = 0; i < 3; i++) {
- if (apex(*neigh[i]) == shareoppo) {
- printf(" (%d, %d, %d).\n", pointmark(org(*neigh[i])),
- pointmark(dest(*neigh[i])), pointmark(apex(*neigh[i])));
- }
- }
- }
-
- // The front will be finished by two or three faces.
- maketetrahedron(&newtet);
- setorg(newtet, org(front));
- setdest(newtet, dest(front));
- setapex(newtet, apex(front));
- setoppo(newtet, shareoppo);
- // 'front' may be a 'fake' tet.
- tspivot(front, checksh);
- if (oppo(front) == (point) NULL) {
- // Dealloc the 'fake' tet.
- tetrahedrondealloc(front.tet);
- // This side (newtet) is a boundary face, let 'dummytet' bond to it.
- // Otherwise, 'dummytet' may point to a dead tetrahedron after the
- // old cavity tets are removed.
- dummytet[0] = encode(newtet);
- } else {
- // Bond two tetrahedra, also dissolve the old bond at 'front'.
- bond(newtet, front);
- // 'front' becomes an interior face, add it to 'flipqueue'.
- if (flipqueue != (queue *) NULL) {
- enqueueflipface(front, flipqueue);
- }
- }
- if (checksh.sh != dummysh) {
- if (oppo(front) == (point) NULL) {
- stdissolve(checksh);
- }
- sesymself(checksh);
- tsbond(newtet, checksh);
- }
- // Bond the neighbor faces to 'newtet'.
- for (i = 0; i < 3; i++) {
- fnext(newtet, newface);
- if (apex(*neigh[i]) == shareoppo) {
- // This side is finished. 'neigh[i]' may be a 'fake' tet.
- tspivot(*neigh[i], checksh);
- if (oppo(*neigh[i]) == (point) NULL) {
- // Dealloc the 'fake' tet.
- tetrahedrondealloc(neigh[i]->tet);
- // This side (newface) is a boundary face, let 'dummytet' bond to
- // it. Otherwise, 'dummytet' may point to a dead tetrahedron
- // after the old cavity tets are removed.
- dummytet[0] = encode(newface);
- } else {
- // Bond two tetrahedra, also dissolve the old bond at 'neigh[i]'.
- bond(newface, *neigh[i]);
- // 'neigh[i]' becomes an interior face, add it to 'flipqueue'.
- if (flipqueue != (queue *) NULL) {
- enqueueflipface(*neigh[i], flipqueue);
- }
- }
- if (checksh.sh != dummysh) {
- if (oppo(*neigh[i]) == (point) NULL) {
- stdissolve(checksh);
- }
- sesymself(checksh);
- tsbond(newface, checksh);
- }
- // Remove it from the link.
- frontlink->del(neigh[i]);
- } else {
- // This side is unfinished. Add 'newface' into 'frontlink'.
- frontlink->add(&newface);
- }
- // Get the face in 'newtet' corresponding to 'neigh[i]'.
- enextself(newtet);
- }
- } // End of while loop.
-
- return frontlink->len() == 0;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// reducecavity1() Reduce the cavity by forming a new tetrahedron from a //
-// cavity face to a visible point. As a result, create //
-// one or more new edges inside the cavity. //
-// //
-// We know that the cavity is not simply reducable, we have to create new //
-// faces inside the cavity in order to reduce the cavity. This routine finds //
-// the most suitable edge we can create in the cavity. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::reducecavity1(link* frontlink, queue* flipqueue)
-{
- list *edgelist;
- triface front, *neigh[3], *checkface;
- triface newtet, newface;
- face checksh;
- point forg, fdest;
- point workpt[3], *edgeends;
- REAL sign;
- bool isneighbor, isvalid;
- bool isexist, isfind;
- bool isreducable;
- unsigned long count;
- int loopcount;
- int i, j, k;
-
- if (b->verbose > 2) {
- printf(" Reducecavity1: %d faces.\n", (int) frontlink->len());
- }
-
- // Initialize 'edgelist'. Each edge has two endpoints and 1 counter.
- edgelist = new list(sizeof(point) * 3, NULL);
-
- loopcount = 0;
- while (loopcount < frontlink->len()) {
- front = * (triface *) frontlink->getnitem(loopcount + 1);
- // Make the front point to the inside of the cavity.
- adjustedgering(front, CW);
- if (b->verbose > 2) {
- printf(" Get front (%d, %d, %d).\n", pointmark(org(front)),
- pointmark(dest(front)), pointmark(apex(front)));
- }
- // Find the three neighbors of 'front' in 'frontlink'.
- for (i = 0; i < 3; i++) {
- forg = org(front);
- fdest = dest(front);
- isneighbor = false;
- for (j = 0; j < frontlink->len() && !isneighbor; j++) {
- if (j == loopcount) continue;
- checkface = (triface *) frontlink->getnitem(j + 1);
- for (k = 0; k < 3; k++) {
- workpt[0] = org(*checkface);
- workpt[1] = dest(*checkface);
- if (workpt[0] == forg) {
- if (workpt[1] == fdest) isneighbor = true;
- } else if (workpt[0] == fdest) {
- if (workpt[1] == forg) isneighbor = true;
- }
- if (isneighbor) {
- neigh[i] = checkface;
- break;
- }
- enextself(*checkface);
- }
- }
- assert(isneighbor);
- enextself(front);
- }
- // Check the three edges which are possibly created in cavity.
- for (i = 0; i < 3; i++) {
- // 'forg', 'fdest' is the edge.
- forg = apex(front);
- fdest = apex(*neigh[i]);
- // Two face vertices.
- workpt[0] = org(front);
- workpt[1] = dest(front);
- // Only do check if these four points form a positive volume. Allow
- // the case that they are coplanar.
- sign = orient3d(workpt[0], workpt[1], forg, fdest);
- if (sign <= 0.0) {
- // Check the face (forg, fdest, workpt[i]) is valid or not.
- isvalid = true;
- for (j = 0; j < 2 && isvalid; j++) {
- // Skip the following tests if the face is (nearly) degenerate.
- if (iscollinear(forg, fdest, workpt[j], b->epsilon)) {
- isvalid = false;
- }
- for (k = 0; k < frontlink->len() && isvalid; k++) {
- if (k == loopcount) continue;
- checkface = (triface *) frontlink->getnitem(k + 1);
- if (checkface == neigh[i]) continue;
- isvalid = !tritritest(checkface, forg, fdest, workpt[j]);
- }
- }
- if (isvalid) {
- // This edge can be created. Check in 'edgelist', if it is not
- // in there, add it, if it exists, increase its counter.
- isexist = false;
- for (j = 0; j < edgelist->len() && !isexist; j++) {
- edgeends = (point *)(* edgelist)[j];
- if (edgeends[0] == forg) {
- if (edgeends[1] == fdest) isexist = true;
- } else if (edgeends[0] == fdest) {
- if (edgeends[1] == forg) isexist = true;
- }
- }
- if (!isexist) {
- // Not exist, add it into 'edgelist'.
- if (b->verbose > 2) {
- printf(" Add edge (%d, %d).\n", pointmark(forg),
- pointmark(fdest));
- }
- edgeends = (point *) edgelist->append(NULL);
- edgeends[0] = forg;
- edgeends[1] = fdest;
- edgeends[2] = (point) 1;
- } else {
- // Exist, only increase its counter.
- if (b->verbose > 2) {
- printf(" Increase edge (%d, %d)'s counter.\n",
- pointmark(forg), pointmark(fdest));
- }
- count = (unsigned long)(edgeends[2]);
- edgeends[2] = (point) (++count);
- }
- }
- }
- enextself(front);
- }
- loopcount++;
- }
-
- isreducable = edgelist->len() > 0;
-
- if (edgelist->len() > 0) {
- // Get the edge which has the largest counter.
- k = 0;
- for (i = 0; i < edgelist->len(); i++) {
- edgeends = (point *)(* edgelist)[i];
- count = (unsigned long)(edgeends[2]);
- if (k < (int) count) {
- k = (int) count;
- j = i;
- }
- }
- // Get the edge we want to create.
- edgeends = (point *)(* edgelist)[j];
- if (b->verbose > 2) {
- printf(" Create new edge (%d, %d).\n", pointmark(edgeends[0]),
- pointmark(edgeends[1]));
- }
- // Find two adjacent faces in 'frontlink' conatining this edge's ends.
- neigh[0] = neigh[1] = (triface *) NULL;
- isfind = false;
- for (i = 0; i < frontlink->len() && !isfind; i++) {
- checkface = (triface *) frontlink->getnitem(i + 1);
- for (j = 0; j < 3; j++) {
- if (apex(*checkface) == edgeends[0]) {
- neigh[0] = checkface;
- break;
- }
- enextself(*checkface);
- }
- if (neigh[0] != (triface *) NULL) {
- forg = org(*neigh[0]);
- fdest = dest(*neigh[0]);
- for (k = 0; k < frontlink->len(); k++) {
- if (k == i) continue;
- checkface = (triface *) frontlink->getnitem(k + 1);
- isneighbor = false;
- for (j = 0; j < 3; j++) {
- workpt[0] = org(*checkface);
- workpt[1] = dest(*checkface);
- if (workpt[0] == forg) {
- if (workpt[1] == fdest) isneighbor = true;
- } else if (workpt[0] == fdest) {
- if (workpt[1] == forg) isneighbor = true;
- }
- if (isneighbor) break;
- enextself(*checkface);
- }
- if (isneighbor) {
- if (apex(*checkface) == edgeends[1]) {
- neigh[1] = checkface;
- isfind = true;
- break;
- }
- }
- }
- if (neigh[1] == (triface *) NULL) {
- neigh[0] = (triface *) NULL;
- }
- }
- }
- assert(isfind);
- if (b->verbose > 2) {
- for (i = 0; i < 2; i++) {
- printf(" Finish face (%d, %d, %d).\n", pointmark(org(*neigh[i])),
- pointmark(dest(*neigh[i])), pointmark(apex(*neigh[i])));
- }
- }
- // Make the front point inside the cavity.
- front = *neigh[0];
- adjustedgering(front, CW);
- maketetrahedron(&newtet);
- setorg(newtet, org(front));
- setdest(newtet, dest(front));
- setapex(newtet, apex(front));
- setoppo(newtet, edgeends[1]);
- // 'front' may be a 'fake' tet.
- tspivot(front, checksh);
- if (oppo(front) == (point) NULL) {
- // Dealloc the 'fake' tet.
- tetrahedrondealloc(front.tet);
- // This side (newtet) is a boundary face, let 'dummytet' bond to it.
- // Otherwise, 'dummytet' may point to a dead tetrahedron after the
- // old cavity tets are removed.
- dummytet[0] = encode(newtet);
- } else {
- // Bond two tetrahedra, also dissolve the old bond at 'front'.
- bond(newtet, front);
- // 'front' becomes an interior face, add it to 'flipqueue'.
- if (flipqueue != (queue *) NULL) {
- enqueueflipface(front, flipqueue);
- }
- }
- if (checksh.sh != dummysh) {
- if (oppo(front) == (point) NULL) {
- stdissolve(checksh);
- }
- sesymself(checksh);
- tsbond(newtet, checksh);
- }
- fnext(newtet, newface);
- // 'neigh[1]' may be a 'fake' tet.
- tspivot(*neigh[1], checksh);
- if (oppo(*neigh[1]) == (point) NULL) {
- // Dealloc the 'fake' tet.
- tetrahedrondealloc(neigh[1]->tet);
- // This side (newface) is a boundary face, let 'dummytet' bond to it.
- // Otherwise, 'dummytet' may point to a dead tetrahedron after the
- // old cavity tets are removed.
- dummytet[0] = encode(newface);
- } else {
- // Bond two tetrahedra, also dissolve the old bond at 'newface'.
- bond(*neigh[1], newface);
- // 'neigh[0]' becomes an interior face, add it to 'flipqueue'.
- if (flipqueue != (queue *) NULL) {
- enqueueflipface(*neigh[1], flipqueue);
- }
- }
- if (checksh.sh != dummysh) {
- if (oppo(*neigh[1]) == (point) NULL) {
- stdissolve(checksh);
- }
- sesymself(checksh);
- tsbond(newface, checksh);
- }
- // Remove 'neigh[0]', 'neigh[1]' from 'frontlink'.
- frontlink->del(neigh[0]);
- frontlink->del(neigh[1]);
- // Add two new faces into 'frontlink'.
- enextfnext(newtet, newface);
- frontlink->add(&newface);
- enext2fnext(newtet, newface);
- frontlink->add(&newface);
- }
-
- delete edgelist;
- return isreducable;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// triangulatecavity() Triangulate a cavity by filling a set of Delaunay //
-// tetrahedra inside. //
-// //
-// The boundary of the cavity is consisted of two list of triangular faces. //
-// 'floorlist' is a list of coplanar subfaces. All subfaces are oriented in //
-// the same direction so that the cavity is in the above part of each face. //
-// 'ceilinglist' is a list of faces of tetrahedra which are crossing the //
-// cavity, they form the rest part of the boundary of the cavity. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-triangulatecavity(list* floorlist, list* ceillist, list* floorptlist,
- list* ceilptlist)
-{
- link *frontlink;
- link *ptlink;
- queue *flipqueue;
-
- if (b->verbose > 1) {
- printf(" Triangulate cavity %d floors, %d ceilings.\n",
- floorlist->len(), ceillist->len());
- }
-
- // Initialize flipqueue;
- flipqueue = new queue(sizeof(badface));
- // Initialize 'frontlink', 'ptlink'.
- frontlink = new link(sizeof(triface), NULL, 256);
- ptlink = new link(sizeof(point), NULL, 256);
-
- initializecavity(floorlist, ceillist, floorptlist, ceilptlist, frontlink,
- ptlink);
-
- // Loop until 'frontlink' is empty.
- while (frontlink->len() > 0) {
- // Shrink the cavity by finishing easy connected fronts.
- if (!reducecavity(frontlink, ptlink, flipqueue)) {
- // Create new fronts inside the cavity (may insert point(s)).
- if (!reducecavity1(frontlink, flipqueue)) {
- // reducecavity2(frontlink, flipqueue);
- assert(0);
- }
- }
- }
- // Some inner faces may need be flipped.
- flip(flipqueue, NULL);
-
- delete frontlink;
- delete ptlink;
- delete flipqueue;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// formmissingregion() Form the missing region from a given missing face. //
-// //
-// 'missingsh' is a missing subface. Start from it, we can find the missing //
-// adjoinging subfaces. More detail, remember that all missing subfaces have //
-// been infected, and missing region of a facet is bounded by facet segments.//
-// All missing subfaces of the region can be found by checking the neighbors //
-// of 'missingsh', and the neighbors of the neighbors, and so on. //
-// //
-// 'missingshlist' returns all missing subfaces of this region, furthermore, //
-// the edge rings of these subfaces are oriented in the same direction. //
-// 'equatptlist' returns the vertices of the missing subfaces. Both lists //
-// should be empty on input. 'worklist' is used for marking vertices of the //
-// missing region. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-formmissingregion(face* missingsh, list* missingshlist, list* equatptlist,
- int* worklist)
-{
- face neighsh, worksh, workseg;
- point workpt[3];
- int idx, i, j;
-
- // Add 'missingsh' into 'missingshlist'.
- missingshlist->append(missingsh);
- // Save and mark its three vertices.
- workpt[0] = sorg(*missingsh);
- workpt[1] = sdest(*missingsh);
- workpt[2] = sapex(*missingsh);
- for (i = 0; i < 3; i++) {
- idx = pointmark(workpt[i]) - in->firstnumber;
- worklist[idx] = 1;
- equatptlist->append(&workpt[i]);
- }
- // Temporarily uninfect it (avoid to save it again).
- suninfect(*missingsh);
-
- // Find other missing subfaces.
- for (i = 0; i < missingshlist->len(); i++) {
- // Get a missing subface.
- worksh = * (face *)(* missingshlist)[i];
- // Check three neighbors of this face.
- for (j = 0; j < 3; j++) {
- sspivot(worksh, workseg);
- if (workseg.sh == dummysh) {
- spivot(worksh, neighsh);
- if (sinfected(neighsh)) {
- // Find a missing subface, adjust the edge ring.
- if (sorg(neighsh) != sdest(worksh)) {
- sesymself(neighsh);
- }
- if (b->verbose > 2) {
- printf(" Add missing subface (%d, %d, %d).\n",
- pointmark(sorg(neighsh)), pointmark(sdest(neighsh)),
- pointmark(sapex(neighsh)));
- }
- missingshlist->append(&neighsh);
- // Save and mark its apex.
- workpt[0] = sapex(neighsh);
- idx = pointmark(workpt[0]) - in->firstnumber;
- worklist[idx] = 1;
- equatptlist->append(&workpt[0]);
- // Temporarily uninfect it (avoid to save it again).
- suninfect(neighsh);
- }
- }
- senextself(worksh);
- }
- }
-
- // The missing region has been formed. Infect missing subfaces again.
- for (i = 0; i < missingshlist->len(); i++) {
- worksh = * (face *)(* missingshlist)[i];
- sinfect(worksh);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// scoutcrossingedge() Search an edge crossing the missing region. //
-// //
-// 'missingshlist' contains all subfaces of the missing region. This routine //
-// first form a 'boundedgelist' consists of all boundary edges of the region,//
-// which are existing in DT (because they are either edges of existing faces //
-// or segments of the facet). A crossing edge is found by rotating faces of //
-// DT around one of the boundary edges. It is possible that there is no edge //
-// crosses the missing region (e.g. the region has a degenerate point set). //
-// //
-// If find a croosing edge, return TRUE, and 'crossedgelist' contains this //
-// edge. Otherwise, return FALSE. Both 'boundedgelist' and 'crossedgelist' //
-// should be empty on input. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-scoutcrossingedge(list* missingshlist, list* boundedgelist,
- list* crossedgelist, int* worklist)
-{
- triface starttet, spintet, worktet;
- face startsh, neighsh, worksh, workseg;
- point torg, tdest, tapex, workpt[3];
- enum finddirectionresult collinear;
- bool crossflag, inlistflag;
- int hitbdry, i, j, k;
-
- // Form the 'boundedgelist'. Loop through 'missingshlist', check edges
- // of these subfaces. If an edge is a subsegment, or the neighbor
- // subface is uninfected, add it to 'boundedgelist'.
- for (i = 0; i < missingshlist->len(); i++) {
- worksh = * (face *)(* missingshlist)[i];
- for (j = 0; j < 3; j++) {
- sspivot(worksh, workseg);
- if (workseg.sh == dummysh) {
- spivot(worksh, neighsh);
- if (!sinfected(neighsh)) {
- boundedgelist->append(&worksh);
- }
- } else {
- boundedgelist->append(&worksh);
- }
- senextself(worksh);
- }
- }
-
- crossflag = false;
- // Find a crossing edge. It is possible there is no such edge. We need to
- // loop through all edges of 'boundedgelist' for sure we don't miss any.
- for (i = 0; i < boundedgelist->len() && !crossflag; i++) {
- startsh = * (face *)(* boundedgelist)[i];
- // 'startsh' holds an existing edge of the DT, find it.
- torg = sorg(startsh);
- tdest = sdest(startsh);
- tapex = sapex(startsh);
- getsearchtet(torg, tdest, &starttet, &workpt[0]);
- collinear = finddirection(&starttet, workpt[0]);
- if (collinear == LEFTCOLLINEAR) {
- enext2self(starttet);
- esymself(starttet);
- } else if (collinear == TOPCOLLINEAR) {
- fnextself(starttet);
- enext2self(starttet);
- esymself(starttet);
- }
- assert(dest(starttet) == workpt[0]);
- // Find the crossing edge by rotating faces around 'starttet'.
- spintet = starttet;
- hitbdry = 0;
- do {
- if (fnextself(spintet)) {
- // Check if the opposite edge of 'spintet' crosses the region.
- workpt[1] = apex(spintet);
- workpt[2] = oppo(spintet);
- j = pointmark(workpt[1]) - in->firstnumber;
- k = pointmark(workpt[2]) - in->firstnumber;
- if (worklist[j] == 1 || worklist[k] == 1) {
- // One of the two points is a vertex of the missing region. This
- // edge can not cross this region.
- inlistflag = false;
- } else {
- // Check if the edge crosses the region by performing a triangle
- // triangle intersection test. ('workpt[0]' is the dest of the
- // rotating edge 'spintet').
- inlistflag = (triangle_triangle_inter(torg, tdest, tapex, workpt[0],
- workpt[1], workpt[2]) == INTERSECT);
- }
- if (inlistflag) {
- // Find an edge crossing the missing region. Save it.
- worktet = spintet;
- adjustedgering(worktet, CCW);
- enextfnextself(worktet);
- enextself(worktet);
- // Add this edge (worktet) into 'crossedgelist'.
- crossedgelist->append(&worktet);
- break;
- }
- if (apex(spintet) == apex(starttet)) break;
- } else {
- hitbdry++;
- // It is only possible to hit boundary once.
- if (hitbdry < 2) {
- esym(starttet, spintet);
- }
- }
- } while (hitbdry < 2);
- crossflag = (crossedgelist->len() == 1);
- }
-
- return crossflag;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// rearrangesubfaces() Rearrange the set of subfaces of a missing region //
-// so that they conform to the faces of DT. //
-// //
-// The missing region formed by subfaces of 'missingshlist' contains a set //
-// of degenerate vertices, hence the set of subfaces don't match the set of //
-// faces in DT. Instead of forcing them to present in DT, we re-arrange the //
-// connection of them so that the new subfaces conform to the faces of DT. //
-// //
-// 'boundedgelist' is a set of boundary edges of the region, these edges(may //
-// be subsegments) must exist in DT. The process of rearrangement can be //
-// described as follows: //
-// - Form an inital link of boundary egdes; //
-// - For each boundary edge (it must exist in DT), //
-// - Remove it from the link; //
-// - Look for a face in DT which contains this edge and has its apex //
-// be a region vertex; Such face should exist (otherwise, an edge //
-// will cross the region). //
-// - Create a new subface on this face; insert it into the surface //
-// mesh (the old subface connected at this edge will automatically //
-// be disconnecte; //
-// - Check the other two edges of this new created subface, if one //
-// matches a boundary edge, remove the edge from the link (it is //
-// finished) and bond them together. Otherwise, add a new boundary //
-// to the link. //
-// - Loop until the link of boundary edge is empty. //
-// //
-// On completion, we have created and inserted a set of new subfaces which //
-// conform to faces of DT. The set of old subfaces in 'missingshlist' are //
-// deleted. The region vertices in 'equatptlist' are unmarked. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-rearrangesubfaces(list* missingshlist, list* boundedgelist, list* equatptlist,
- int* worklist)
-{
- link *boundedgelink;
- triface starttet, spintet, neightet, worktet;
- face shloop, newsh, neighsh, spinsh, worksh;
- face workseg, casingin, casingout;
- point torg, tdest, workpt;
- point liftpoint;
- enum finddirectionresult collinear;
- REAL area, ori1, ori2;
- bool matchflag, finishflag;
- int shmark, idx, hitbdry;
- int i, j;
-
- // Initialize the boundary edge link.
- boundedgelink = new link(sizeof(face), NULL, 256);
-
- // Create an initial boundary link.
- for (i = 0; i < boundedgelist->len(); i++) {
- shloop = * (face *)(* boundedgelist)[i];
- if (i == 0) {
- if (b->quality) {
- // area will be copied to all new created subfaces.
- area = areabound(shloop);
- }
- // 'shmark' will be set to all new created subfaces.
- shmark = shellmark(shloop);
- // Get the liftpoint of this facet for later checking.
- liftpoint = getliftpoint(shmark);
- }
- sspivot(shloop, workseg);
- if (workseg.sh == dummysh) {
- // This edge is an interior edge.
- spivot(shloop, neighsh);
- boundedgelink->add(&neighsh);
- } else {
- // This side has a segment, the edge exists.
- boundedgelink->add(&shloop);
- }
- }
-
- // Loop until the link is empty. Each boundary edge will be finished by a
- // new subface. After a new subface is created, it will be inserted into
- // both the surface mesh and the DT, and new boundary edge will be added
- // into the link.
- while (boundedgelink->len() > 0) {
- // Remove the top boundary edge from the link.
- shloop = * (face *) boundedgelink->del(1);
- sspivot(shloop, workseg); // 'workseg' indicates it is a segment or not.
- torg = sorg(shloop);
- tdest = sdest(shloop);
- // Find a tetrahedron containing edge (torg, tdest).
- getsearchtet(torg, tdest, &starttet, &workpt);
- collinear = finddirection(&starttet, workpt);
- if (collinear == LEFTCOLLINEAR) {
- enext2self(starttet);
- esymself(starttet);
- } else if (collinear == TOPCOLLINEAR) {
- fnextself(starttet);
- enext2self(starttet);
- esymself(starttet);
- }
- assert(dest(starttet) == workpt);
- // Spinning faces around this edge, find the one lies on the facet AND
- // is not a subface yet.
- matchflag = false;
- spintet = starttet;
- hitbdry = 0;
- do {
- workpt = apex(spintet);
- idx = pointmark(workpt) - in->firstnumber;
- if (worklist[idx] == 1) {
- // This face is on the facet.
- if (workseg.sh != dummysh) {
- // 'shloop' is a segment.
- if (workpt != sapex(shloop)) {
- // Be careful that 'workpt' may not be the vertex that we're
- // looking for. Because the missing region may be non-convex.
- // However, the right vertex should be at the same side of
- // the apex of 'shloop'.
- ori1 = orient3d(torg, tdest, liftpoint, sapex(shloop));
- ori2 = orient3d(torg, tdest, liftpoint, workpt);
- assert(ori1 != 0.0 && ori2 != 0.0);
- if ((ori1 > 0.0 && ori2 > 0.0) || (ori1 < 0.0 && ori2 < 0.0)) {
- matchflag = true;
- break;
- }
- } else {
- // This face is already exist! It is possible. Created by
- // previous recovering procedures.
- matchflag = true;
- break;
- }
- } else {
- // 'shloop' is not a segment. Only insert a subface when there
- // does not already exist a subface.
- tspivot(spintet, neighsh);
- if (neighsh.sh == dummysh) {
- // This face is not a subface yet.
- matchflag = true;
- break;
- }
- }
- }
- if (!fnextself(spintet)) {
- hitbdry ++;
- if (hitbdry < 2) {
- esym(starttet, spintet);
- if (!fnextself(spintet)) {
- hitbdry ++;
- }
- }
- }
- } while (hitbdry < 2 && apex(spintet) != apex(starttet));
- assert(matchflag == true);
- tspivot(spintet, neighsh);
- if (neighsh.sh != dummysh) {
- printf("Error: Invalid PLC.\n");
- printf(" Facet #%d and facet #%d overlap each other.\n",
- shellmark(neighsh), shellmark(shloop));
- printf(" It might be caused by a facet is defined more than once.\n");
- printf(" Hint: Use -d switch to find all overlapping facets.\n");
- exit(1);
- }
- // The side of 'spintet' is at which a new subface will be attached.
- adjustedgering(spintet, CCW);
- // Create the new subface.
- makeshellface(subfaces, &newsh);
- setsorg(newsh, org(spintet));
- setsdest(newsh, dest(spintet));
- setsapex(newsh, apex(spintet));
- if (b->quality) {
- // Copy the areabound into the new subface.
- setareabound(newsh, area);
- }
- setshellmark(newsh, shmark);
- // Insert it into the current mesh.
- tsbond(spintet, newsh);
- sym(spintet, neightet);
- if (neightet.tet != dummytet) {
- sesym(newsh, neighsh);
- tsbond(neightet, neighsh);
- }
- // Insert it into the surface mesh.
- sspivot(shloop, workseg);
- if (workseg.sh == dummysh) {
- sbond(shloop, newsh);
- } else {
- // There is a subsegment, 'shloop' is the subface which is going to
- // die. Insert the 'newsh' at the place of 'shloop' into its face
- // link, so as to dettach 'shloop'. The original connection is:
- // -> casingin -> shloop -> casingout ->, it will be changed with:
- // -> casingin -> newsh -> casingout ->. Pay attention to the
- // case when this subsegment is dangling in the mesh, i.e., 'shloop'
- // is bonded to itself.
- spivot(shloop, casingout);
- if (shloop.sh != casingout.sh) {
- // 'shloop' is not bonded to itself.
- spinsh = casingout;
- do {
- casingin = spinsh;
- spivotself(spinsh);
- } while (sapex(spinsh) != sapex(shloop));
- assert(casingin.sh != shloop.sh);
- // Bond casingin -> newsh -> casingout.
- sbond1(casingin, newsh);
- sbond1(newsh, casingout);
- } else {
- // Bond newsh -> newsh.
- sbond(newsh, newsh);
- }
- // Bond the segment.
- ssbond(newsh, workseg);
- }
- // Check other two sides of this new subface. If a side is not bonded
- // to any edge in the link, it will be added to the link.
- for (i = 0; i < 2; i++) {
- if (i == 0) {
- senext(newsh, worksh);
- } else {
- senext2(newsh, worksh);
- }
- torg = sorg(worksh);
- tdest = sdest(worksh);
- finishflag = false;
- for (j = 0; j < boundedgelink->len() && !finishflag; j++) {
- neighsh = * (face *) boundedgelink->getnitem(j + 1);
- if ((sorg(neighsh) == torg && sdest(neighsh) == tdest) ||
- (sorg(neighsh) == tdest && sdest(neighsh) == torg)) {
- // Find a boundary edge. Bond them and exit the loop.
- sspivot(neighsh, workseg);
- if (workseg.sh == dummysh) {
- sbond(neighsh, worksh);
- } else {
- // There is a subsegment, 'neighsh' is the subface which is
- // going to die. Do the same as above for 'worksh'.
- spivot(neighsh, casingout);
- if (neighsh.sh != casingout.sh) {
- // 'neighsh' is not bonded to itself.
- spinsh = casingout;
- do {
- casingin = spinsh;
- spivotself(spinsh);
- } while (sapex(spinsh) != sapex(neighsh));
- assert(casingin.sh != neighsh.sh);
- // Bond casingin -> worksh -> casingout.
- sbond1(casingin, worksh);
- sbond1(worksh, casingout);
- } else {
- // Bond worksh -> worksh.
- sbond(worksh, worksh);
- }
- // Bond the segment.
- ssbond(worksh, workseg);
- }
- // Remove this boundary edge from the link.
- boundedgelink->del(j + 1);
- finishflag = true;
- }
- }
- if (!finishflag) {
- // It's a new boundary edge, add it to link.
- boundedgelink->add(&worksh);
- }
- }
- }
-
- // Deallocate the set of old missing subfaces.
- for (i = 0; i < missingshlist->len(); i++) {
- worksh = * (face *)(* missingshlist)[i];
- shellfacedealloc(subfaces, worksh.sh);
- }
- // Unmark region vertices in 'worklist'.
- for (i = 0; i < equatptlist->len(); i++) {
- workpt = * (point *)(* equatptlist)[i];
- idx = pointmark(workpt) - in->firstnumber;
- worklist[idx] = 0;
- }
-
- delete boundedgelink;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// recoversubfaces() Recover the set of subfaces of a missing region so //
-// that they become faces of the DT. //
-// //
-// 'missingshlist' contains a set of missing subfaces which form the missing //
-// region. A cavity retriangulation method is used to recover these subfaces //
-// in the DT. To do so, first find all the tetrahedra in DT that intersect //
-// the relative interior of the missing region. Then delete them from the DT,//
-// this will form a cavity C inside the DT. Now we want to retriangulate the //
-// C and want the missing subfaces will appear after the retriangulation. To //
-// complete this, we first insert the missing subfaces into the C, so as to //
-// split it into two disjointed cavity. Then retriangulate them separately. //
-// (See the intoduction of the routine triangulatecavity() for the cavity //
-// retriangulation method.) //
-// //
-// On input, 'crossedgelist' contains an edge which is crossing the missing //
-// region. All tetrahedra containing this edge must cross the region. It is //
-// possible there are other crossing edges as well. They can be found by //
-// checking the edges of the discovered crossing tetrahedra. Through this //
-// way, other crossing tetrahedra of the region can be found incrementally. //
-// However, it doesn't guarantee we can get all crossing tetrahedra of this //
-// region. The discovered tetrahedra are connected each other. There may //
-// exist other tetrahedra which are crossing the region but disjoint with //
-// the set of discovered tetrahedra. Due to this fact, we need to check the //
-// missing subfaces once more. Only recover those which are crossed by the //
-// set of discovered tetrahedra. The other subfaces remain missing and will //
-// be recovered later. //
-// //
-// On completion, we have modified the DT to incorporate a set of subfaces. //
-// The recovered subfaces of 'missingshlist' are uninfected. The region //
-// vertices in 'equatptlist' are unmarked. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-recoversubfaces(list* missingshlist, list* crossedgelist, list* equatptlist,
- int* worklist)
-{
- list *crossshlist, *crosstetlist;
- list *belowfacelist, *abovefacelist;
- list *belowptlist, *aboveptlist;
- triface starttet, spintet, neightet, worktet;
- face startsh, neighsh, worksh, workseg;
- point torg, tdest, tapex, workpt[3];
- REAL checksign, orgori, destori;
- bool crossflag, inlistflag;
- bool belowflag, aboveflag;
- int idx, share;
- int i, j, k;
-
- // Initialize the working lists.
- crossshlist = new list(sizeof(face), NULL);
- crosstetlist = new list(sizeof(triface), NULL);
- belowfacelist = new list(sizeof(triface), NULL);
- abovefacelist = new list(sizeof(triface), NULL);
- belowptlist = new list("point *");
- aboveptlist = new list("point *");
-
- // Get a face as horizon.
- startsh = * (face *)(* missingshlist)[0];
- torg = sorg(startsh);
- tdest = sdest(startsh);
- tapex = sapex(startsh);
-
- // Collect the set of crossing tetrahedra by rotating crossing edges. At
- // the beginning, 'crossedgelist' contains one crossing edge, others
- // will be discovered after newly crossing tetrahedra are found.
- for (i = 0; i < crossedgelist->len(); i++) {
- starttet = * (triface *)(* crossedgelist)[i];
- adjustedgering(starttet, CCW);
- if (b->verbose > 2) {
- printf(" Collect tets containing edge (%d, %d).\n",
- pointmark(org(starttet)), pointmark(dest(starttet)));
- }
- orgori = orient3d(torg, tdest, tapex, org(starttet));
- destori = orient3d(torg, tdest, tapex, dest(starttet));
- assert(orgori * destori < 0.0);
- spintet = starttet;
- do {
- // The face rotation should not meet boundary.
- fnextself(spintet);
- // Check the validity of the PLC.
- tspivot(spintet, worksh);
- if (worksh.sh != dummysh) {
- printf("Error: Invalid PLC.\n");
- printf(" Two subfaces (%d, %d, %d) and (%d, %d, %d)\n",
- pointmark(torg), pointmark(tdest), pointmark(tapex),
- pointmark(sorg(worksh)), pointmark(sdest(worksh)),
- pointmark(sapex(worksh)));
- printf(" are found intersecting each other.\n");
- printf(" Hint: Use -d switch to find all intersecting facets.\n");
- exit(1);
- }
- if (!infected(spintet)) {
- if (b->verbose > 2) {
- printf(" Add crossing tet (%d, %d, %d, %d).\n",
- pointmark(org(spintet)), pointmark(dest(spintet)),
- pointmark(apex(spintet)), pointmark(oppo(spintet)));
- }
- infect(spintet);
- crosstetlist->append(&spintet);
- }
- // Check whether other two edges of 'spintet' is a crossing edge.
- // It can be quickly checked from the apex of 'spintet', if it is
- // not on the facet, then there exists a crossing edge.
- workpt[0] = apex(spintet);
- idx = pointmark(workpt[0]) - in->firstnumber;
- if (worklist[idx] != 1) {
- // Either edge (dest, apex) or edge (apex, org) crosses.
- checksign = orient3d(torg, tdest, tapex, workpt[0]);
- assert(checksign != 0.0);
- if (checksign * orgori < 0.0) {
- enext2(spintet, worktet); // edge (apex, org).
- workpt[1] = org(spintet);
- } else {
- assert(checksign * destori < 0.0);
- enext(spintet, worktet); // edge (dest, apex).
- workpt[1] = dest(spintet);
- }
- // 'worktet' represents the crossing edge. Add it into list only
- // it doesn't exist in 'crossedgelist'.
- inlistflag = false;
- for (j = 0; j < crossedgelist->len() && !inlistflag; j++) {
- neightet = * (triface *)(* crossedgelist)[j];
- if (org(neightet) == workpt[0]) {
- if (dest(neightet) == workpt[1]) inlistflag = true;
- } else if (org(neightet) == workpt[1]) {
- if (dest(neightet) == workpt[0]) inlistflag = true;
- }
- }
- if (!inlistflag) {
- crossedgelist->append(&worktet);
- }
- }
- } while (apex(spintet) != apex(starttet));
- }
-
- // Identifying the boundary faces of the cavity.
- for (i = 0; i < crosstetlist->len(); i++) {
- starttet = * (triface *)(* crosstetlist)[i];
- assert(infected(starttet));
- adjustedgering(starttet, CCW);
- // Only need to check two sides of starttet. Current side and the side
- // of fnext() are sharing the crossing edge, the two neighbors must
- // be crossing tetrahedra. Hence these two sides can't be boundaries
- // of the cavity.
- for (j = 0; j < 2; j++) {
- if (j == 0) {
- enextfnext(starttet, worktet);
- } else {
- enext2fnext(starttet, worktet);
- }
- sym(worktet, neightet);
- // If the neighbor doesn't exist or exists but doesn't be infected,
- // it's a boundary face of the cavity, save it.
- if (neightet.tet == dummytet || !infected(neightet)) {
- workpt[0] = org(worktet);
- workpt[1] = dest(worktet);
- workpt[2] = apex(worktet);
- belowflag = aboveflag = false;
- share = 0;
- for (k = 0; k < 3; k++) {
- idx = pointmark(workpt[k]) - in->firstnumber;
- if (worklist[idx] == 0) {
- // It's not a vertices of facet, find which side it lies.
- checksign = orient3d(torg, tdest, tapex, workpt[k]);
- assert(checksign != 0.0);
- if (checksign > 0.0) {
- // It lies "below" the facet wrt. 'startsh'.
- worklist[idx] = 2;
- belowptlist->append(&workpt[k]);
- } else if (checksign < 0.0) {
- // It lies "above" the facet wrt. 'startsh'.
- worklist[idx] = 3;
- aboveptlist->append(&workpt[k]);
- }
- }
- if (worklist[idx] == 2) {
- // This face lies "below" the facet wrt. 'startsh'.
- belowflag = true;
- } else if (worklist[idx] == 3) {
- // This face lies "above" the facet wrt. 'startsh'.
- aboveflag = true;
- } else {
- // In degenerate case, this face may just be the equator.
- assert(worklist[idx] == 1);
- share++;
- }
- }
- // The degenerate case has been ruled out.
- assert(share < 3);
- // Only one flag is possible for a cavity face.
- assert(belowflag ^ aboveflag);
- if (belowflag) {
- belowfacelist->append(&worktet);
- } else if (aboveflag) {
- abovefacelist->append(&worktet);
- }
- }
- }
- }
-
- // Form the set of missing subfaces which are crossed by tetrahedra of
- // 'crosstetlist'. It is a subset of 'missingshlist'. These faces
- // need be recovered (using cavity filling algorithm). Other subfaces
- // remain infected and will be recovered later.
- for (i = 0; i < missingshlist->len(); i++) {
- worksh = * (face *)(* missingshlist)[i];
- assert(sinfected(worksh));
- torg = sorg(worksh);
- tdest = sdest(worksh);
- tapex = sapex(worksh);
- crossflag = false;
- for (j = 0; j < crosstetlist->len() && !crossflag; j++) {
- starttet = * (triface *)(* crosstetlist)[j];
- adjustedgering(starttet, CCW);
- // Only need to check two sides of worktet.
- for (k = 0; k < 2 && !crossflag; k++) {
- if (k == 0) {
- worktet = starttet;
- } else {
- fnext(starttet, worktet);
- }
- // torg, tdest and tapex SHOULD be non-collinear.
- crossflag = tritritest(&worktet, torg, tdest, tapex);
- }
- }
- if (crossflag) {
- // 'worksh' is crossed by 'worktet', uninfect it.
- suninfect(worksh);
- crossshlist->append(&worksh);
- }
- }
-
- // Clear flags set in 'worklist'.
- for (i = 0; i < equatptlist->len(); i++) {
- workpt[0] = * (point *)(* equatptlist)[i];
- idx = pointmark(workpt[0]) - in->firstnumber;
- // assert(worklist[idx] == 1);
- worklist[idx] = 0;
- }
- for (i = 0; i < belowptlist->len(); i++) {
- workpt[0] = * (point *)(* belowptlist)[i];
- idx = pointmark(workpt[0]) - in->firstnumber;
- // assert(worklist[idx] == 2);
- worklist[idx] = 0;
- }
- for (i = 0; i < aboveptlist->len(); i++) {
- workpt[0] = * (point *)(* aboveptlist)[i];
- idx = pointmark(workpt[0]) - in->firstnumber;
- // assert(worklist[idx] == 3);
- worklist[idx] = 0;
- }
-
- assert (aboveptlist->len() > 0);
- // Retriangulate the upper part of the cavity.
- triangulatecavity(crossshlist, abovefacelist, equatptlist, aboveptlist);
-
- // Inverse the direction of faces in 'missingshlist'.
- for (i = 0; i < crossshlist->len(); i++) {
- worksh = * (face *)(* crossshlist)[i];
- sesymself(worksh);
- * (face *)(* crossshlist)[i] = worksh;
- }
-
- assert(belowptlist->len() > 0);
- // Retriangulate the lower part of the cavity.
- triangulatecavity(crossshlist, belowfacelist, equatptlist, belowptlist);
-
- // Delete old tetrahedra of this cavity.
- for (i = 0; i < crosstetlist->len(); i++) {
- worktet = * (triface *)(* crosstetlist)[i];
- tetrahedrondealloc(worktet.tet);
- }
-
- delete crossshlist;
- delete crosstetlist;
- delete belowfacelist;
- delete abovefacelist;
- delete belowptlist;
- delete aboveptlist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// constrainedfacets() Insert PLC facets into the Delaunay tetrahedraliz- //
-// ation of the PLC vertices. //
-// //
-// This is the last step of our CDT algorithm, which transforms a Delaunay //
-// tetrahedralization DT into a constrained Delaunay tetrahedralization by //
-// forcing all subfaces of the surface mesh F of the PLC into the DT. It is //
-// important that all PLC segments have been previously recovered in DT, so //
-// the existence of a CDT is guaranteed (by our CDT theorem). Hence, all //
-// subfaces of F can be recovered in the DT without inserting vertices. //
-// //
-// The process of constrained facets can be though of "merging" the surface //
-// mesh F completely into the Delaunay tetrahedralization DT. Recover the //
-// subfaces in DT if they are not matching. Hence, the process is divided //
-// into two steps: first insert all existing subfaces of F into DT, that is, //
-// each subface already appears as a face of DT; at the same time, queue all //
-// missing subfaces. Then recover missing subfaces (explained below). The //
-// second step changes a DT into a CDT. //
-// //
-// When a subface s of a facet f is found missing in DT, most probably, some //
-// other subfaces near to s and belong to f are also missing. The set of //
-// adjoining missing subfaces of f forms a missing region. It is obvious to //
-// see that this region is closed and is bounded by the edges of existing //
-// subfaces or the segments of f. Instead of recovering missing subfaces of //
-// this region one by one, they are recovered together, i.e., each time a //
-// closed missing region will be recovered. //
-// //
-// There are two possibilities can from a mssing region R: (1) Some edges of //
-// DT intersect subfaces in R; (2) No edge of DT cross R, but another set of //
-// faces of DT spans R, this is because the existence of degeneracies (five //
-// or more vertices of R are cospherical). If it is case (1), we modify DT //
-// so that its faces spans R. A cavity retriangulation algorithm is used to //
-// recover the region. If it is case (2), F is modified so that the set of //
-// subfaces of F matches faces in DT. A face rearrangment algorithm is used. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::constrainedfacets()
-{
- queue *missingshqueue;
- list *missingshlist;
- list *boundedgelist;
- list *crossedgelist;
- list *equatptlist;
- triface searchtet;
- face subloop;
- int *worklist;
- int i;
-
- if (!b->quiet) {
- printf("Constraining facets.\n");
- }
-
- // Compute a mapping from points to tetrahedra.
- makepoint2tetmap();
- // Initialize the queue to store the set of missing subfaces.
- missingshqueue = new queue(sizeof(face));
- // Initialize the working lists.
- missingshlist = new list(sizeof(face), NULL);
- boundedgelist = new list(sizeof(face), NULL);
- crossedgelist = new list(sizeof(triface), NULL);
- equatptlist = new list("point *");
- // Initialize the list for matching vertices.
- worklist = new int[points->items];
- for (i = 0; i < points->items; i++) {
- worklist[i] = 0;
- }
-
- // Step 1, go through all subfaces, insert existing subfaces into DT.
- // Missing subfaces are queued. Moreover, they are infected so that
- // can be distinguished from existing ones.
- searchtet.tet = (tetrahedron *) NULL;
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- if (!insertsubface(&subloop, &searchtet)) {
- if (b->verbose > 1) {
- printf(" Queuing missing subface (%d, %d, %d).\n",
- pointmark(sorg(subloop)), pointmark(sdest(subloop)),
- pointmark(sapex(subloop)));
- }
- sinfect(subloop);
- missingshqueue->push(&subloop);
- }
- subloop.sh = shellfacetraverse(subfaces);
- }
-
- // Step 2, recover all missing subfaces.
- while (!missingshqueue->empty()) {
- subloop = * (face *) missingshqueue->pop();
- if (!isdead(&subloop) && sinfected(subloop)) {
- if (b->verbose > 1) {
- printf(" Recovering subface (%d, %d, %d).\n",
- pointmark(sorg(subloop)), pointmark(sdest(subloop)),
- pointmark(sapex(subloop)));
- }
- // Other operation may have recovered this subface.
- if (!insertsubface(&subloop, &searchtet)) {
- // First form the missing region.
- formmissingregion(&subloop, missingshlist, equatptlist, worklist);
- // Are there crossing tetrahedra?
- if (scoutcrossingedge(missingshlist, boundedgelist, crossedgelist,
- worklist)) {
- // There are! Recover by retriangulating cavities.
- recoversubfaces(missingshlist, crossedgelist, equatptlist, worklist);
- // There may remain some un-recovered subfaces. Don't ignore them.
- for (i = 0; i < missingshlist->len(); i++) {
- subloop = * (face *)(* missingshlist)[i];
- if (sinfected(subloop)) {
- // Put it back into queue.
- missingshqueue->push(&subloop);
- }
- }
- } else {
- // No crossing tetrahedra. Rearrange subfaces in surface mesh.
- rearrangesubfaces(missingshlist, boundedgelist, equatptlist,
- worklist);
- }
- // Clear all working lists.
- missingshlist->clear();
- boundedgelist->clear();
- crossedgelist->clear();
- equatptlist->clear();
- } else {
- // This subface has been recovered. Only uninfect it.
- suninfect(subloop);
- }
- }
- }
-
- delete missingshqueue;
- delete missingshlist;
- delete boundedgelist;
- delete crossedgelist;
- delete equatptlist;
- delete [] worklist;
-}
-
-//
-// End of constrained Delaunay triangulation routines
-//
-
-//
-// Begin of carving out holes and concavities routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// indenthull() Remove redundant tetrahedra on the convex hull. //
-// //
-// All tetrahedra on the hull which are not protected by subfaces will be //
-// removed. As a result, the convex tetrahedralization becomes concave, and //
-// the new hull is formed by subfaces. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::indenthull()
-{
- memorypool *viri;
- link *hulllink;
- tetrahedron **virusloop;
- triface tetloop, hullface;
- triface checkface, neightet;
- face checksh;
- point p1, p2, p3;
- bool indentflag;;
- int i;
-
- if (b->verbose) {
- printf(" Indenting hulls.\n");
- }
-
- // Initialize a pool of viri.
- viri = new memorypool(sizeof(tetrahedron *), 1024, POINTER, 0);
- // Initialize the hulllink.
- hulllink = new link(sizeof(triface), NULL, 1024);
-
- // Find out all hull faces which are not protected by subfaces. At the
- // same time, infect all tetrahedra which has faces on the hull and
- // are protected by subfaces.
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- indentflag = true;
- for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
- // Is this face on the hull?
- sym(tetloop, neightet);
- if (neightet.tet == dummytet) {
- // Is the face protected by a subface?
- tspivot(tetloop, checksh);
- if (checksh.sh == dummysh) {
- // Add this face into hulllink.
- hulllink->add(&tetloop);
- } else {
- // It is protected by a subface.
- indentflag = false;
- }
- }
- }
- if (!indentflag) {
- // Infect it to indicate it is at interior space.
- virusloop = (tetrahedron **) viri->alloc();
- *virusloop = tetloop.tet;
- }
- tetloop.tet = tetrahedrontraverse();
- }
-
- // Loop until the hulllink is empty.
- while (hulllink->len() > 0) {
- // Remove a hullface from the link.
- hullface = * (triface *) hulllink->del(1);
- // The tet may already be removed.
- if (isdead(&hullface)) continue;
- if (b->verbose > 1) {
- printf(" Indenting face (%d, %d, %d).\n", pointmark(org(hullface)),
- pointmark(dest(hullface)), pointmark(apex(hullface)));
- }
- // The tet may be an interior one (if it is infected).
- indentflag = !infected(hullface);
- // Check if hullface can be indented.
- adjustedgering(hullface, CCW);
- for (i = 0; i < 3 && indentflag; i++) {
- fnext(hullface, checkface);
- sym(checkface, neightet);
- tspivot(checkface, checksh);
- if (neightet.tet != dummytet) {
- // The neighbor exists.
- if (checksh.sh == dummysh) {
- // This side is not protected by a subface. If the neighbor is
- // marked as an interior tet, hullface survives.
- indentflag = !infected(neightet);
- } else {
- // It is protected by a subface.
- if (!infected(neightet)) {
- // This is a new discovered interior tet. Infect it.
- infect(neightet);
- virusloop = (tetrahedron **) viri->alloc();
- *virusloop = neightet.tet;
- }
- }
- }
- enextself(hullface);
- }
- if (!indentflag) {
- // hullface survives.
- p1 = org(hullface);
- p2 = dest(hullface);
- p3 = apex(hullface);
- printf("Warning: Face (%d, %d, %d) is open.\n", pointmark(p1),
- pointmark(p2), pointmark(p3));
- if (!infected(hullface)) {
- // Infect it and add it into viris.
- infect(hullface);
- virusloop = (tetrahedron **) viri->alloc();
- *virusloop = hullface.tet;
- }
- continue;
- }
- // Indent hullface. That is, remove it from the hull. The hullsize is
- // changed, new discoved open hullfaces will be added to hulllink.
- for (i = 0; i < 3; i++) {
- fnext(hullface, checkface);
- sym(checkface, neightet);
- tspivot(checkface, checksh);
- if (neightet.tet != dummytet) {
- // The neighbor exists.
- if (checksh.sh == dummysh) {
- // This side is not protected.
- assert(!infected(neightet));
- hulllink->add(&neightet);
- } else {
- // It is protected.
- assert(infected(neightet));
- stdissolve(checksh);
- }
- // It becomes a new hull face.
- dissolve(neightet);
- hullsize++;
- } else {
- // This side is hull face also.
- if (checksh.sh != dummysh) {
- // A dangling subface. It will be isolated.
- stdissolve(checksh);
- }
- // Decrease the hullsize.
- hullsize--;
- }
- enextself(hullface);
- }
- // Delete the tetrahedron.
- tetrahedrondealloc(hullface.tet);
- // Decrease the hullsize.
- hullsize--;
- }
-
- // Uninfect infected tetrahedra.
- viri->traversalinit();
- virusloop = (tetrahedron **) viri->traverse();
- while (virusloop != (tetrahedron **) NULL) {
- neightet.tet = *virusloop;
- uninfect(neightet);
- virusloop = (tetrahedron **) viri->traverse();
- }
-
- delete viri;
- delete hulllink;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// infecthull() Virally infect all of the tetrahedra of the convex hull //
-// that are not protected by subfaces. Where there are //
-// subfaces, set boundary markers as appropriate. //
-// //
-// Memorypool 'viri' is used to return all the infected tetrahedra. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::infecthull(memorypool *viri)
-{
- triface tetloop, tsymtet;
- tetrahedron **deadtet;
- face hullface;
- // point horg, hdest, hapex;
-
- if (b->verbose) {
- printf(" Marking concavities for elimination.\n");
- }
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- // Is this tetrahedron on the hull?
- for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
- sym(tetloop, tsymtet);
- if (tsymtet.tet == dummytet) {
- // Is the tetrahedron protected by a subface?
- tspivot(tetloop, hullface);
- if (hullface.sh == dummysh) {
- // The tetrahedron is not protected; infect it.
- if (!infected(tetloop)) {
- infect(tetloop);
- deadtet = (tetrahedron **) viri->alloc();
- *deadtet = tetloop.tet;
- break; // Go and get next tet.
- }
- } else {
- // The tetrahedron is protected; set boundary markers if appropriate.
- if (shellmark(hullface) == 0) {
- setshellmark(hullface, 1);
- /*
- horg = sorg(hullface);
- hdest = sdest(hullface);
- hapex = sapex(hullface);
- if (pointmark(horg) == 0) {
- setpointmark(horg, 1);
- }
- if (pointmark(hdest) == 0) {
- setpointmark(hdest, 1);
- }
- if (pointmark(hapex) == 0) {
- setpointmark(hapex, 1);
- }
- */
- }
- }
- }
- }
- tetloop.tet = tetrahedrontraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// plague() Spread the virus from all infected tetrahedra to any //
-// neighbors not protected by subfaces. Delete all infected //
-// tetrahedra. //
-// //
-// This is the procedure that actually creates holes and concavities. //
-// //
-// This procedure operates in two phases. The first phase identifies all //
-// the tetrahedra that will die, and marks them as infected. They are //
-// marked to ensure that each tetrahedron is added to the virus pool only //
-// once, so the procedure will terminate. //
-// //
-// The second phase actually eliminates the infected tetrahedra. It also //
-// eliminates orphaned segments and points(not done now). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::plague(memorypool *viri)
-{
- tetrahedron **virusloop;
- tetrahedron **deadtet;
- triface testtet, neighbor;
- face neighsh, testseg;
- face spinsh, casingin, casingout;
- point checkpt;
- int *tetspernodelist;
- int i, j;
-
- if (b->verbose) {
- printf(" Marking neighbors of marked tetrahedra.\n");
- }
- // Loop through all the infected tetrahedra, spreading the virus to
- // their neighbors, then to their neighbors' neighbors.
- viri->traversalinit();
- virusloop = (tetrahedron **) viri->traverse();
- while (virusloop != (tetrahedron **) NULL) {
- testtet.tet = *virusloop;
- // Temporarily uninfect this tetrahedron, not necessary.
- uninfect(testtet);
- // Check each of the tetrahedron's four neighbors.
- for (testtet.loc = 0; testtet.loc < 4; testtet.loc++) {
- // Find the neighbor.
- sym(testtet, neighbor);
- // Check for a shell between the tetrahedron and its neighbor.
- tspivot(testtet, neighsh);
- // Check if the neighbor is nonexistent or already infected.
- if ((neighbor.tet == dummytet) || infected(neighbor)) {
- if (neighsh.sh != dummysh) {
- // There is a subface separating the tetrahedron from its neighbor,
- // but both tetrahedra are dying, so the subface dies too.
- // Before deallocte this subface, dissolve the connections between
- // other subfaces, subsegments and tetrahedra.
- neighsh.shver = 0;
- // For keep the same enext() direction.
- findedge(&testtet, sorg(neighsh), sdest(neighsh));
- for (i = 0; i < 3; i++) {
- sspivot(neighsh, testseg);
- if (testseg.sh != dummysh) {
- // A subsegment is found at this side, dissolve this subface
- // from the face link of this subsegment.
- testseg.shver = 0;
- spinsh = neighsh;
- if (sorg(spinsh) != sorg(testseg)) {
- sesymself(spinsh);
- }
- spivot(spinsh, casingout);
- if (casingout.sh == spinsh.sh) {
- // This is a trivial face link, only 'neighsh' itself,
- // the subsegment at this side is also died.
- shellfacedealloc(subsegs, testseg.sh);
- } else {
- spinsh = casingout;
- do {
- casingin = spinsh;
- spivotself(spinsh);
- } while (spinsh.sh != neighsh.sh);
- // Set the link casingin->casingout.
- sbond1(casingin, casingout);
- // Bond the subsegment anyway.
- ssbond(casingin, testseg);
- }
- }
- senextself(neighsh);
- enextself(testtet);
- }
- shellfacedealloc(subfaces, neighsh.sh);
- if (neighbor.tet != dummytet) {
- // Make sure the subface doesn't get deallocated again later
- // when the infected neighbor is visited.
- tsdissolve(neighbor);
- }
- }
- } else { // The neighbor exists and is not infected.
- if (neighsh.sh == dummysh) {
- // There is no subface protecting the neighbor, infect it.
- infect(neighbor);
- // Ensure that the neighbor's neighbors will be infected.
- deadtet = (tetrahedron **) viri->alloc();
- *deadtet = neighbor.tet;
- } else { // The neighbor is protected by a subface.
- // Remove this tetrahedron from the subface.
- stdissolve(neighsh);
- // The subface becomes a boundary. Set markers accordingly.
- if (shellmark(neighsh) == 0) {
- setshellmark(neighsh, 1);
- }
- }
- }
- }
- // Remark the tetrahedron as infected, so it doesn't get added to the
- // virus pool again.
- infect(testtet);
- virusloop = (tetrahedron **) viri->traverse();
- }
-
- if (b->verbose) {
- printf(" Deleting marked tetrahedra.\n");
- }
-
- // Create and initialize 'segspernodelist'.
- tetspernodelist = new int[points->items + 1];
- for (i = 0; i < points->items + 1; i++) tetspernodelist[i] = 0;
-
- // Loop the tetrahedra list, counter the number of tets sharing each node.
- tetrahedrons->traversalinit();
- testtet.tet = tetrahedrontraverse();
- while (testtet.tet != (tetrahedron *) NULL) {
- // Increment the number of sharing tets for each endpoint.
- for (i = 0; i < 4; i++) {
- j = pointmark((point) testtet.tet[4 + i]);
- tetspernodelist[j]++;
- }
- testtet.tet = tetrahedrontraverse();
- }
-
- viri->traversalinit();
- virusloop = (tetrahedron **) viri->traverse();
- while (virusloop != (tetrahedron **) NULL) {
- testtet.tet = *virusloop;
- // Record changes in the number of boundary faces, and disconnect
- // dead tetrahedra from their neighbors.
- for (testtet.loc = 0; testtet.loc < 4; testtet.loc++) {
- sym(testtet, neighbor);
- if (neighbor.tet == dummytet) {
- // There is no neighboring tetrahedron on this face, so this face
- // is a boundary face. This tetrahedron is being deleted, so this
- // boundary face is deleted.
- hullsize--;
- } else {
- // Disconnect the tetrahedron from its neighbor.
- dissolve(neighbor);
- // There is a neighboring tetrahedron on this face, so this face
- // becomes a boundary face when this tetrahedron is deleted.
- hullsize++;
- }
- }
- // Check the four corners of this tet if they're isolated.
- for (i = 0; i < 4; i++) {
- checkpt = (point) testtet.tet[4 + i];
- j = pointmark(checkpt);
- tetspernodelist[j]--;
- if (tetspernodelist[j] == 0) {
- setpointtype(checkpt, UNUSEDVERTEX);
- }
- }
- // Return the dead tetrahedron to the pool of tetrahedra.
- tetrahedrondealloc(testtet.tet);
- virusloop = (tetrahedron **) viri->traverse();
- }
-
- delete [] tetspernodelist;
- // Empty the virus pool.
- viri->restart();
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// regionplague() Spread regional attributes and/or volume constraints //
-// (from a .poly file) throughout the mesh. //
-// //
-// This procedure operates in two phases. The first phase spreads an //
-// attribute and/or an volume constraint through a (segment-bounded) region. //
-// The tetrahedra are marked to ensure that each tetrahedra is added to the //
-// virus pool only once, so the procedure will terminate. //
-// //
-// The second phase uninfects all infected tetrahedra, returning them to //
-// normal. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-regionplague(memorypool *viri, REAL attribute, REAL volume)
-{
- tetrahedron **virusloop;
- tetrahedron **regiontet;
- triface testtet, neighbor;
- face neighsh;
-
- if (b->verbose > 1) {
- printf(" Marking neighbors of marked tetrahedra.\n");
- }
- // Loop through all the infected tetrahedra, spreading the attribute
- // and/or volume constraint to their neighbors, then to their neighbors'
- // neighbors.
- viri->traversalinit();
- virusloop = (tetrahedron **) viri->traverse();
- while (virusloop != (tetrahedron **) NULL) {
- testtet.tet = *virusloop;
- // Temporarily uninfect this tetrahedron, not necessary.
- uninfect(testtet);
- if (b->regionattrib) {
- // Set an attribute.
- setelemattribute(testtet.tet, in->numberoftetrahedronattributes,
- attribute);
- }
- if (b->varvolume) {
- // Set an volume constraint.
- setvolumebound(testtet.tet, volume);
- }
- // Check each of the tetrahedron's four neighbors.
- for (testtet.loc = 0; testtet.loc < 4; testtet.loc++) {
- // Find the neighbor.
- sym(testtet, neighbor);
- // Check for a subface between the tetrahedron and its neighbor.
- tspivot(testtet, neighsh);
- // Make sure the neighbor exists, is not already infected, and
- // isn't protected by a subface, or is protected by a nonsolid
- // subface.
- if ((neighbor.tet != dummytet) && !infected(neighbor)
- && (neighsh.sh == dummysh)) {
- // Infect the neighbor.
- infect(neighbor);
- // Ensure that the neighbor's neighbors will be infected.
- regiontet = (tetrahedron **) viri->alloc();
- *regiontet = neighbor.tet;
- }
- }
- // Remark the tetrahedron as infected, so it doesn't get added to the
- // virus pool again.
- infect(testtet);
- virusloop = (tetrahedron **) viri->traverse();
- }
-
- // Uninfect all tetrahedra.
- if (b->verbose > 1) {
- printf(" Unmarking marked tetrahedra.\n");
- }
- viri->traversalinit();
- virusloop = (tetrahedron **) viri->traverse();
- while (virusloop != (tetrahedron **) NULL) {
- testtet.tet = *virusloop;
- uninfect(testtet);
- virusloop = (tetrahedron **) viri->traverse();
- }
- // Empty the virus pool.
- viri->restart();
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// carveholes() Find the holes and infect them. Find the volume //
-// constraints and infect them. Infect the convex hull. //
-// Spread the infection and kill tetrahedra. Spread the //
-// volume constraints. //
-// //
-// This routine mainly calls other routines to carry out all these functions.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::carveholes()
-{
- memorypool *viri;
- triface searchtet;
- triface *holetets;
- triface *regiontets;
- tetrahedron *tptr;
- tetrahedron **holetet;
- tetrahedron **regiontet;
- enum locateresult intersect;
- int i;
-
- if (!b->quiet) {
- printf("Removing unwanted tetrahedra.\n");
- if (b->verbose && (in->numberofholes > 0)) {
- printf(" Marking holes for elimination.\n");
- }
- }
-
- if (in->numberofholes > 0) {
- // Allocate storage for the tetrahedra in which hole points fall.
- holetets = (triface *) new triface[in->numberofholes];
- }
- if (in->numberofregions > 0) {
- // Allocate storage for the tetrahedra in which region points fall.
- regiontets = (triface *) new triface[in->numberofregions];
- }
-
- // Now, we have to find all the holes and regions BEFORE we infect hull
- // and carve the holes, because locate() won't work when there exist
- // infect tetrahedra and the tetrahedronlization is no longer convex.
-
- if (in->numberofholes > 0) {
- // Infect each tetrahedron in which a hole lies.
- for (i = 0; i < 3 * in->numberofholes; i += 3) {
- // Ignore holes that aren't within the bounds of the mesh.
- if ((in->holelist[i] >= xmin) && (in->holelist[i] <= xmax)
- && (in->holelist[i + 1] >= ymin)
- && (in->holelist[i + 1] <= ymax)
- && (in->holelist[i + 2] >= zmin)
- && (in->holelist[i + 2] <= zmax)) {
- searchtet.tet = dummytet;
- // Find a tetrahedron that contains the hole.
- intersect = locate(&in->holelist[i], &searchtet);
- if ((intersect != OUTSIDE) && (!infected(searchtet))) {
- // Record the tetrahedron for processing carve hole.
- holetets[i / 3] = searchtet;
- }
- }
- }
- }
-
- if (in->numberofregions > 0) {
- // Find the starting tetrahedron for each region.
- for (i = 0; i < in->numberofregions; i++) {
- regiontets[i].tet = dummytet;
- // Ignore region points that aren't within the bounds of the mesh.
- if ((in->regionlist[5 * i] >= xmin)
- && (in->regionlist[5 * i] <= xmax)
- && (in->regionlist[5 * i + 1] >= ymin)
- && (in->regionlist[5 * i + 1] <= ymax)
- && (in->regionlist[5 * i + 2] >= zmin)
- && (in->regionlist[5 * i + 2] <= zmax)) {
- searchtet.tet = dummytet;
- // Find a tetrahedron that contains the region point.
- intersect = locate(&in->regionlist[5 * i], &searchtet);
- if ((intersect != OUTSIDE) && (!infected(searchtet))) {
- // Record the tetrahedron for processing after the
- // holes have been carved.
- regiontets[i] = searchtet;
- }
- }
- }
- }
-
- // Initialize a pool of viri to be used for holes, concavities,
- // regional attributes, and/or regional volume constraints.
- viri = new memorypool(sizeof(tetrahedron *), 1024, POINTER, 0);
- // Mark as infected any unprotected tetrahedra on the boundary.
- // This is one way by which concavities are created.
- infecthull(viri);
-
- if (in->numberofholes > 0) {
- // Infect the hole tetrahedron. This is done by marking the
- // tetrahedron as infect and including the tetrahedron in
- // the virus pool.
- for (i = 0; i < in->numberofholes; i++) {
- infect(holetets[i]);
- holetet = (tetrahedron **) viri->alloc();
- *holetet = holetets[i].tet;
- }
- }
-
- if (viri->items > 0) {
- // Carve the holes and concavities.
- plague(viri);
- }
- // The virus pool should be empty now.
-
- if (in->numberofregions > 0) {
- if (!b->quiet) {
- if (b->regionattrib) {
- if (b->varvolume) {
- printf("Spreading regional attributes and volume constraints.\n");
- } else {
- printf("Spreading regional attributes.\n");
- }
- } else {
- printf("Spreading regional volume constraints.\n");
- }
- }
- if (b->regionattrib && !b->refine) {
- // Assign every tetrahedron a regional attribute of zero.
- tetrahedrons->traversalinit();
- tptr = tetrahedrontraverse();
- while (tptr != (tetrahedron *) NULL) {
- setelemattribute(tptr, in->numberoftetrahedronattributes, 0.0);
- tptr = tetrahedrontraverse();
- }
- }
- for (i = 0; i < in->numberofregions; i++) {
- if (regiontets[i].tet != dummytet) {
- // Make sure the tetrahedron under consideration still exists.
- // It may have been eaten by the virus.
- if (!isdead(&(regiontets[i]))) {
- // Put one tetrahedron in the virus pool.
- infect(regiontets[i]);
- regiontet = (tetrahedron **) viri->alloc();
- *regiontet = regiontets[i].tet;
- // Apply one region's attribute and/or volume constraint.
- regionplague(viri, in->regionlist[5 * i + 3],
- in->regionlist[5 * i + 4]);
- // The virus pool should be empty now.
- }
- }
- }
- if (b->regionattrib && !b->refine) {
- // Note the fact that each tetrahedron has an additional attribute.
- in->numberoftetrahedronattributes++;
- }
- }
-
- // Free up memory.
- delete viri;
- if (in->numberofholes > 0) {
- delete [] holetets;
- }
- if (in->numberofregions > 0) {
- delete [] regiontets;
- }
-}
-
-//
-// End of carving out holes and concavities routines
-//
-
-//
-// Begin of mesh update routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// reconstructmesh() Reconstruct a tetrahedral mesh from a list of //
-// tetrahedra and possibly a list of boundary faces. //
-// //
-// The list of tetrahedra is stored in 'in->tetrahedronlist', the list of //
-// boundary faces is stored in 'in->trifacelist'. The tetrahedral mesh is //
-// reconstructed in memorypool 'tetrahedrons', its boundary faces (subfaces) //
-// are reconstructed in 'subfaces', its boundary edges (subsegments) are //
-// reconstructed in 'subsegs'. If the -a switch is used, this procedure will //
-// also read a list of REALs from 'in->tetrahedronvolumelist' and set a //
-// maximum volume constraint on each tetrahedron. //
-// //
-// If the user has provided the boundary faces in 'in->trifacelist', they //
-// will be inserted the mesh. Otherwise subfaces will be identified from the //
-// mesh. All hull faces (including faces of the internal holes) will be //
-// recognized as subfaces, internal faces between two tetrahedra which have //
-// different attributes will also be recognized as subfaces. //
-// //
-// Subsegments will be identified after subfaces are reconstructed. Edges at //
-// the intersections of non-coplanar subfaces are recognized as subsegments. //
-// Edges between two coplanar subfaces with different boundary markers are //
-// also recognized as subsegments. //
-// //
-// The facet index of each subface will be set automatically after we have //
-// recovered subfaces and subsegments. That is, the set of subfaces, which //
-// are coplanar and have the same boundary marker will be recognized as a //
-// facet and has a unique index, stored as the facet marker in each subface //
-// of the set, the real boundary marker of each subface will be found in //
-// 'in->facetmarkerlist' by the index. Facet index will be used in Delaunay //
-// refinement for detecting two incident facets. //
-// //
-// Points which are not corners of tetrahedra will be inserted into the mesh.//
-// Return the number of faces on the hull after the reconstruction. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-long tetgenmesh::reconstructmesh()
-{
- tetrahedron **tetsperverlist;
- shellface **facesperverlist;
- triface tetloop, neightet, neineightet, spintet;
- face subloop, neighsh, neineighsh, subseg;
- face sface1, sface2;
- point *idx2verlist;
- point torg, tdest, tapex, toppo;
- point norg, ndest, napex;
- list *neighshlist, *markerlist;
- REAL sign, attrib, volume;
- REAL da1, da2;
- bool bondflag, insertsegflag;
- int *idx2tetlist;
- int *idx2facelist;
- int *worklist;
- int facetidx, marker;
- int iorg, idest, iapex, ioppo;
- int inorg, indest, inapex;
- int index, i, j;
-
- if (!b->quiet) {
- printf("Reconstructing mesh.\n");
- }
-
- // Create a map from index to points.
- makeindex2pointmap(idx2verlist);
-
- // Create the tetrahedra.
- for (i = 0; i < in->numberoftetrahedra; i++) {
- // Create a new tetrahedron and set its four corners, make sure that
- // four corners form a positive orientation.
- maketetrahedron(&tetloop);
- index = i * in->numberofcorners;
- // Although there may be 10 nodes, we only read the first 4.
- iorg = in->tetrahedronlist[index] - in->firstnumber;
- idest = in->tetrahedronlist[index + 1] - in->firstnumber;
- iapex = in->tetrahedronlist[index + 2] - in->firstnumber;
- ioppo = in->tetrahedronlist[index + 3] - in->firstnumber;
- torg = idx2verlist[iorg];
- tdest = idx2verlist[idest];
- tapex = idx2verlist[iapex];
- toppo = idx2verlist[ioppo];
- sign = orient3d(torg, tdest, tapex, toppo);
- if (sign > 0.0) {
- norg = torg; torg = tdest; tdest = norg;
- } else if (sign == 0.0) {
- printf("Warning: Tetrahedron %d is degenerate.\n", i + in->firstnumber);
- }
- setorg(tetloop, torg);
- setdest(tetloop, tdest);
- setapex(tetloop, tapex);
- setoppo(tetloop, toppo);
- // Temporarily set the vertices be type FREEVOLVERTEX, to indicate that
- // they belong to the mesh. These types may be changed later.
- setpointtype(torg, FREEVOLVERTEX);
- setpointtype(tdest, FREEVOLVERTEX);
- setpointtype(tapex, FREEVOLVERTEX);
- setpointtype(toppo, FREEVOLVERTEX);
- // Set element attributes if they exist.
- for (j = 0; j < in->numberoftetrahedronattributes; j++) {
- index = i * in->numberoftetrahedronattributes;
- attrib = in->tetrahedronattributelist[index + j];
- setelemattribute(tetloop.tet, j, attrib);
- }
- // If -a switch is used (with no number follows) Set a volume
- // constraint if it exists.
- if (b->varvolume) {
- if (in->tetrahedronvolumelist != (REAL *) NULL) {
- volume = in->tetrahedronvolumelist[i];
- } else {
- volume = -1.0;
- }
- setvolumebound(tetloop.tet, volume);
- }
- }
-
- // Set the connection between tetrahedra.
- hullsize = 0l;
- // Create a map from nodes to tetrahedra.
- maketetrahedronmap(idx2tetlist, tetsperverlist);
- // Initialize the worklist.
- worklist = new int[points->items];
- for (i = 0; i < points->items; i++) {
- worklist[i] = 0;
- }
-
- // Loop all tetrahedra, bond two tetrahedra if they share a common face.
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- // Loop the four sides of the tetrahedron.
- for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
- sym(tetloop, neightet);
- if (neightet.tet != dummytet) continue; // This side has finished.
- torg = org(tetloop);
- tdest = dest(tetloop);
- tapex = apex(tetloop);
- iorg = pointmark(torg) - in->firstnumber;
- idest = pointmark(tdest) - in->firstnumber;
- iapex = pointmark(tapex) - in->firstnumber;
- worklist[iorg] = 1;
- worklist[idest] = 1;
- worklist[iapex] = 1;
- bondflag = false;
- // Search its neighbor in the adjacent tets of torg.
- for (j = idx2tetlist[iorg]; j < idx2tetlist[iorg + 1] && !bondflag;
- j++) {
- if (tetsperverlist[j] == tetloop.tet) continue; // Skip myself.
- neightet.tet = tetsperverlist[j];
- for (neightet.loc = 0; neightet.loc < 4; neightet.loc++) {
- sym(neightet, neineightet);
- if (neineightet.tet == dummytet) {
- norg = org(neightet);
- ndest = dest(neightet);
- napex = apex(neightet);
- inorg = pointmark(norg) - in->firstnumber;
- indest = pointmark(ndest) - in->firstnumber;
- inapex = pointmark(napex) - in->firstnumber;
- if ((worklist[inorg] + worklist[indest] + worklist[inapex]) == 3) {
- // Find! Bond them together and break the loop.
- bond(tetloop, neightet);
- bondflag = true;
- break;
- }
- }
- }
- }
- if (!bondflag) {
- hullsize++; // It's a hull face.
- // Bond this side to outer space.
- dummytet[0] = encode(tetloop);
- if (in->pointmarkerlist != (int *) NULL) {
- // Set its three corners's markers be boundary (hull) vertices.
- if (in->pointmarkerlist[iorg] == 0) {
- in->pointmarkerlist[iorg] = 1;
- }
- if (in->pointmarkerlist[idest] == 0) {
- in->pointmarkerlist[idest] = 1;
- }
- if (in->pointmarkerlist[iapex] == 0) {
- in->pointmarkerlist[iapex] = 1;
- }
- }
- }
- worklist[iorg] = 0;
- worklist[idest] = 0;
- worklist[iapex] = 0;
- }
- tetloop.tet = tetrahedrontraverse();
- }
-
- // Subfaces will be inserted into the mesh.
- if (in->trifacelist != (int *) NULL) {
- // Recover subfaces from 'in->trifacelist'.
- for (i = 0; i < in->numberoftrifaces; i++) {
- index = i * 3;
- iorg = in->trifacelist[index] - in->firstnumber;
- idest = in->trifacelist[index + 1] - in->firstnumber;
- iapex = in->trifacelist[index + 2] - in->firstnumber;
- // Look for the location of this subface.
- worklist[iorg] = 1;
- worklist[idest] = 1;
- worklist[iapex] = 1;
- bondflag = false;
- // Search its neighbor in the adjacent tets of torg.
- for (j = idx2tetlist[iorg]; j < idx2tetlist[iorg + 1] && !bondflag;
- j++) {
- neightet.tet = tetsperverlist[j];
- for (neightet.loc = 0; neightet.loc < 4; neightet.loc++) {
- norg = org(neightet);
- ndest = dest(neightet);
- napex = apex(neightet);
- inorg = pointmark(norg) - in->firstnumber;
- indest = pointmark(ndest) - in->firstnumber;
- inapex = pointmark(napex) - in->firstnumber;
- if ((worklist[inorg] + worklist[indest] + worklist[inapex]) == 3) {
- bondflag = true; // Find!
- break;
- }
- }
- }
- if (bondflag) {
- // Create a new subface and insert it into the mesh.
- makeshellface(subfaces, &subloop);
- torg = idx2verlist[iorg];
- tdest = idx2verlist[idest];
- tapex = idx2verlist[iapex];
- setsorg(subloop, torg);
- setsdest(subloop, tdest);
- setsapex(subloop, tapex);
- // Set the vertices be FREESUBVERTEX to indicate they belong to a
- // facet of the domain. They may be changed later.
- setpointtype(torg, FREESUBVERTEX);
- setpointtype(tdest, FREESUBVERTEX);
- setpointtype(tapex, FREESUBVERTEX);
- if (in->trifacemarkerlist != (int *) NULL) {
- setshellmark(subloop, in->trifacemarkerlist[i]);
- }
- adjustedgering(neightet, CCW);
- findedge(&subloop, org(neightet), dest(neightet));
- tsbond(neightet, subloop);
- sym(neightet, neineightet);
- if (neineightet.tet != dummytet) {
- sesymself(subloop);
- tsbond(neineightet, subloop);
- }
- } else {
- printf("Warning: Subface %d is discarded.\n", i + in->firstnumber);
- }
- worklist[iorg] = 0;
- worklist[idest] = 0;
- worklist[iapex] = 0;
- }
- } else {
- // Indentify subfaces from the mesh.
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- // Loop the four sides of the tetrahedron.
- for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
- tspivot(tetloop, subloop);
- if (subloop.sh != dummysh) continue;
- bondflag = false;
- sym(tetloop, neightet);
- if (neightet.tet == dummytet) {
- // It's a hull face. Insert a subface at here.
- bondflag = true;
- } else {
- // It's an interior face. Insert a subface if two tetrahedra have
- // different attributes (i.e., they belong to two regions).
- if (in->numberoftetrahedronattributes > 0) {
- if (elemattribute(neightet.tet,
- in->numberoftetrahedronattributes - 1) !=
- elemattribute(tetloop.tet,
- in->numberoftetrahedronattributes - 1)) {
- bondflag = true;
- }
- }
- }
- if (bondflag) {
- adjustedgering(tetloop, CCW);
- makeshellface(subfaces, &subloop);
- torg = org(tetloop);
- tdest = dest(tetloop);
- tapex = apex(tetloop);
- setsorg(subloop, torg);
- setsdest(subloop, tdest);
- setsapex(subloop, tapex);
- // Set the vertices be FACETVERTEX to indicate they belong to a
- // facet of the domain. They may be changed later.
- setpointtype(torg, FACETVERTEX);
- setpointtype(tdest, FACETVERTEX);
- setpointtype(tapex, FACETVERTEX);
- tsbond(tetloop, subloop);
- if (neightet.tet != dummytet) {
- sesymself(subloop);
- tsbond(neightet, subloop);
- }
- }
- }
- tetloop.tet = tetrahedrontraverse();
- }
- }
-
- // Set the connection between subfaces. An subsegment may have more than
- // two subfaces sharing it, 'neighshlist' stores all subfaces sharing
- // one edge.
- neighshlist = new list(sizeof(face), NULL);
- // Create a map from nodes to subfaces.
- makesubfacemap(idx2facelist, facesperverlist);
-
- // Loop over the set of subfaces, setup the connection between subfaces.
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- for (i = 0; i < 3; i++) {
- spivot(subloop, neighsh);
- if (neighsh.sh == dummysh) {
- // This side is 'empty', operate on it.
- torg = sorg(subloop);
- tdest = sdest(subloop);
- tapex = sapex(subloop);
- neighshlist->append(&subloop);
- iorg = pointmark(torg) - in->firstnumber;
- // Search its neighbor in the adjacent list of torg.
- for (j = idx2facelist[iorg]; j < idx2facelist[iorg + 1]; j++) {
- neighsh.sh = facesperverlist[j];
- if (neighsh.sh == subloop.sh) continue;
- neighsh.shver = 0;
- if (isfacehasedge(&neighsh, torg, tdest)) {
- findedge(&neighsh, torg, tdest);
- // Insert 'neighsh' into 'neighshlist'.
- if (neighshlist->len() < 2) {
- neighshlist->append(&neighsh);
- } else {
- for (index = 0; index < neighshlist->len() - 1; index++) {
- sface1 = * (face *)(* neighshlist)[index];
- sface2 = * (face *)(* neighshlist)[index + 1];
- da1 = facedihedral(torg, tdest, sapex(sface1), sapex(neighsh));
- da2 = facedihedral(torg, tdest, sapex(sface1), sapex(sface2));
- if (da1 < da2) {
- break; // Insert it after index.
- }
- }
- neighshlist->insert(index + 1, &neighsh);
- }
- }
- }
- // Bond the subfaces in 'neighshlist'.
- if (neighshlist->len() > 1) {
- neighsh = * (face *)(* neighshlist)[0];
- for (j = 1; j <= neighshlist->len(); j++) {
- if (j < neighshlist->len()) {
- neineighsh = * (face *)(* neighshlist)[j];
- } else {
- neineighsh = * (face *)(* neighshlist)[0];
- }
- sbond1(neighsh, neineighsh);
- neighsh = neineighsh;
- }
- } else {
- // No neighbor subface be found, bond 'subloop' to itself.
- sbond(subloop, subloop);
- }
- neighshlist->clear();
- }
- senextself(subloop);
- }
- subloop.sh = shellfacetraverse(subfaces);
- }
-
- // Subsegments will be introudced.
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- for (i = 0; i < 3; i++) {
- sspivot(subloop, subseg);
- if (subseg.sh == dummysh) {
- // This side has no subsegment bonded, check it.
- torg = sorg(subloop);
- tdest = sdest(subloop);
- tapex = sapex(subloop);
- spivot(subloop, neighsh);
- spivot(neighsh, neineighsh);
- insertsegflag = false;
- if (subloop.sh == neighsh.sh || subloop.sh != neineighsh.sh) {
- // This side is either self-bonded or more than two subfaces,
- // insert a subsegment at this side.
- insertsegflag = true;
- } else {
- // Only two subfaces case.
- assert(subloop.sh != neighsh.sh);
- napex = sapex(neighsh);
- sign = orient3d(torg, tdest, tapex, napex);
- if (iscoplanar(torg, tdest, tapex, napex, sign, b->epsilon)) {
- // Although they are coplanar, we still need to check if they
- // have the same boundary marker.
- insertsegflag = (shellmark(subloop) != shellmark(neighsh));
- } else {
- // Non-coplanar.
- insertsegflag = true;
- }
- }
- if (insertsegflag) {
- // Create a subsegment at this side.
- makeshellface(subsegs, &subseg);
- setsorg(subseg, torg);
- setsdest(subseg, tdest);
- // At the moment, all segment vertices have type FACETVERTEX.
- // They will be set to type ACUTEVERTEX or NONACUTEVERTEX by
- // routine markacutevertices() later.
- // setpointtype(torg, SEGMENTVERTEX);
- // setpointtype(tdest, SEGMENTVERTEX);
- // Bond all subfaces to this subsegment.
- neighsh = subloop;
- do {
- ssbond(neighsh, subseg);
- spivotself(neighsh);
- } while (neighsh.sh != subloop.sh);
- }
- }
- senextself(subloop);
- }
- subloop.sh = shellfacetraverse(subfaces);
- }
- // Remember the number of input segments.
- insegment = subsegs->items;
- // Find the acute vertices and set them be type ACUTEVERTEX.
-
- // Indentify the facet and set facet index for each subface.
- markerlist = new list("int");
-
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- // Only operate on uninfected subface, after operating, infect it.
- if (!sinfected(subloop)) {
- // A new facet has found.
- marker = shellmark(subloop);
- markerlist->append(&marker);
- facetidx = markerlist->len(); // 'facetidx' starts from 1.
- setshellmark(subloop, facetidx);
- sinfect(subloop);
- neighshlist->append(&subloop);
- // Find out all subfaces of this facet (bounded by subsegments).
- for (i = 0; i < neighshlist->len(); i++) {
- neighsh = * (face *) (* neighshlist)[i];
- for (j = 0; j < 3; j++) {
- sspivot(neighsh, subseg);
- if (subseg.sh == dummysh) {
- spivot(neighsh, neineighsh);
- if (!sinfected(neineighsh)) {
- // 'neineighsh' is in the same facet as 'subloop'.
- assert(shellmark(neineighsh) == marker);
- setshellmark(neineighsh, facetidx);
- sinfect(neineighsh);
- neighshlist->append(&neineighsh);
- }
- }
- senextself(neighsh);
- }
- }
- neighshlist->clear();
- }
- subloop.sh = shellfacetraverse(subfaces);
- }
- // Save the facet markers in 'in->facetmarkerlist'.
- in->numberoffacets = markerlist->len();
- in->facetmarkerlist = new int[in->numberoffacets];
- for (i = 0; i < in->numberoffacets; i++) {
- marker = * (int *) (* markerlist)[i];
- in->facetmarkerlist[i] = marker;
- }
- // Uninfect all subfaces.
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- assert(sinfected(subloop));
- suninfect(subloop);
- subloop.sh = shellfacetraverse(subfaces);
- }
-
- // The mesh contains boundary now.
- checksubfaces = 1;
-
- if (b->quality) {
- // Check and recover the Delaunay property.
- queue* flipqueue = new queue(sizeof(badface));
- checkdelaunay(flipqueue);
- if (!flipqueue->empty()) {
- // Call flip algorithm to recover Delaunayness.
- flip(flipqueue, NULL);
- }
- delete flipqueue;
- }
-
- delete markerlist;
- delete neighshlist;
- delete [] worklist;
- delete [] idx2tetlist;
- delete [] tetsperverlist;
- delete [] idx2facelist;
- delete [] facesperverlist;
- delete [] idx2verlist;
-
- return hullsize;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// insertaddpoints() Insert additional points in 'in->addpointlist'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::insertaddpoints()
-{
- queue *flipqueue;
- triface searchtet;
- face checksh, checkseg;
- point newpoint;
- point p1, p2, p3, p4;
- enum locateresult loc;
- REAL ori;
- int ptmark;
- int index;
- int i, j;
-
- if (!b->quiet) {
- printf("Insert additional points into mesh.\n");
- }
- // Initialize 'flipqueue'.
- flipqueue = new queue(sizeof(badface));
- recenttet.tet = dummytet;
-
- index = 0;
- for (i = 0; i < in->numberofaddpoints; i++) {
- // Create a newpoint.
- newpoint = (point) points->alloc();
- newpoint[0] = in->addpointlist[index++];
- newpoint[1] = in->addpointlist[index++];
- newpoint[2] = in->addpointlist[index++];
- for (j = 0; j < in->numberofpointattributes; j++) {
- newpoint[3 + j] = 0.0;
- }
- // Remember the point index (starts from 'in->firstnumber').
- ptmark = (int) points->items - (in->firstnumber == 1 ? 0 : 1);
- setpointmark(newpoint, ptmark);
- // Find the location of the inserted point.
- searchtet = recenttet;
- loc = locate(newpoint, &searchtet);
- if (loc != OUTSIDE) {
- if (loc != ONVERTEX) {
- loc = adjustlocate(newpoint, &searchtet, loc, b->epsilon);
- }
- }
- if (loc == OUTSIDE) {
- // Perform a brute-force search.
- tetrahedrons->traversalinit();
- searchtet.tet = tetrahedrontraverse();
- while (searchtet.tet != (tetrahedron *) NULL) {
- p1 = (point) searchtet.tet[4];
- p2 = (point) searchtet.tet[5];
- p3 = (point) searchtet.tet[6];
- p4 = (point) searchtet.tet[7];
- ori = orient3d(p2, p1, p3, newpoint);
- if (ori >= 0) {
- ori = orient3d(p1, p2, p4, newpoint);
- if (ori >= 0) {
- ori = orient3d(p2, p3, p4, newpoint);
- if (ori >= 0) {
- ori = orient3d(p3, p1, p4, newpoint);
- if (ori >= 0) {
- // 'newpoint' lies inside, or on a face, or on an edge, or
- // a vertex of 'searchtet'.
- loc = adjustlocate(newpoint, &searchtet, OUTSIDE, b->epsilon);
- if (loc != OUTSIDE) break;
- }
- }
- }
- }
- searchtet.tet = tetrahedrontraverse();
- }
- }
- // Insert the point if it not lies outside or on a vertex.
- switch (loc) {
- case INTETRAHEDRON:
- setpointtype(newpoint, FREEVOLVERTEX);
- splittetrahedron(newpoint, &searchtet, flipqueue);
- break;
- case ONFACE:
- tspivot(searchtet, checksh);
- if (checksh.sh != dummysh) {
- setpointtype(newpoint, FREESUBVERTEX);
- } else {
- setpointtype(newpoint, FREEVOLVERTEX);
- }
- splittetface(newpoint, &searchtet, flipqueue);
- break;
- case ONEDGE:
- tsspivot(&searchtet, &checkseg);
- if (checkseg.sh != dummysh) {
- setpointtype(newpoint, FREESEGVERTEX);
- } else {
- tspivot(searchtet, checksh);
- if (checksh.sh != dummysh) {
- setpointtype(newpoint, FREESUBVERTEX);
- } else {
- setpointtype(newpoint, FREEVOLVERTEX);
- }
- }
- splittetedge(newpoint, &searchtet, flipqueue);
- break;
- case ONVERTEX:
- if (b->verbose) {
- printf("Warning: Point (%.17g, %.17g, %.17g) falls on a vertex.\n",
- newpoint[0], newpoint[1], newpoint[2]);
- }
- break;
- case OUTSIDE:
- if (b->verbose) {
- printf("Warning: Point (%.17g, %.17g, %.17g) lies outside the mesh.\n",
- newpoint[0], newpoint[1], newpoint[2]);
- }
- break;
- }
- // Remember the tetrahedron for next point searching.
- recenttet = searchtet;
- if (loc == ONVERTEX || loc == OUTSIDE) {
- pointdealloc(newpoint);
- } else {
- flip(flipqueue, NULL);
- }
- }
-
- delete flipqueue;
-}
-
-//
-// End of mesh update routines
-//
-
-//
-// Begin of Delaunay refinement routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// initializerpsarray() Calculate the initial radii of protecting spheres //
-// of all acute vertices, save in 'rpsarray'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::initializerpsarray(REAL* rpsarray)
-{
- list *neightetlist;
- tetrahedron tetptr;
- triface starttet, neightet;
- point pointloop, workpt[3];
- REAL rps, len;
- int index, i, j;
-
- if (b->verbose) {
- printf(" Initializing protecting spheres.\n");
- }
-
- // Initialize the point2tet field of each point.
- points->traversalinit();
- pointloop = pointtraverse();
- while (pointloop != (point) NULL) {
- setpoint2tet(pointloop, (tetrahedron) NULL);
- pointloop = pointtraverse();
- }
- // Construct a map from points to tetrahedra.
- makepoint2tetmap();
- // Initialize 'neightetlist'.
- neightetlist = new list(sizeof(triface), NULL, 256);
-
- points->traversalinit();
- pointloop = pointtraverse();
- while (pointloop != (point) NULL) {
- tetptr = point2tet(pointloop);
- // Only calculate lfs(p) if it is acute and is not dangling.
- if ((pointtype(pointloop) == ACUTEVERTEX) &&
- (tetptr != (tetrahedron) NULL)) {
- decode(tetptr, starttet);
- assert((starttet.tet != NULL) && (starttet.tet != dummytet));
- // Find all tetrahedra sharing 'pointloop'.
- findorg(&starttet, pointloop);
- infect(starttet);
- neightetlist->append(&starttet);
- for (i = 0; i < neightetlist->len(); i++) {
- starttet = * (triface *)(* neightetlist)[i];
- assert(infected(starttet));
- // The origin of 'starttet' should be 'pointloop'.
- adjustedgering(starttet, CCW);
- if (org(starttet) != pointloop) {
- enextself(starttet);
- }
- assert(org(starttet) == pointloop);
- // Let 'starttet' be the opposite face of 'pointloop'.
- enextfnextself(starttet);
- assert(oppo(starttet) == pointloop);
- // Get three neighbors of faces having 'pointloop'.
- adjustedgering(starttet, CCW);
- for (j = 0; j < 3; j++) {
- fnext(starttet, neightet);
- symself(neightet);
- // Add it into list if is is not outer space and not infected.
- if ((neightet.tet != dummytet) && !infected(neightet)) {
- findorg(&neightet, pointloop);
- infect(neightet);
- neightetlist->append(&neightet);
- }
- enextself(starttet);
- }
- }
- // 'neightetlist' contains all tetrahedra sharing at 'pointloop'. Get
- // the shortest edge length of edges sharing at 'pointloop'.
- rps = longest;
- for (i = 0; i < neightetlist->len(); i++) {
- starttet = * (triface *)(* neightetlist)[i];
- assert(org(starttet) == pointloop);
- workpt[0] = dest(starttet);
- workpt[1] = apex(starttet);
- workpt[2] = oppo(starttet);
- for (j = 0; j < 3; j++) {
- len = distance(workpt[j], pointloop);
- if (pointtype(workpt[j]) == ACUTEVERTEX) {
- len /= 3.0;
- } else {
- len /= 2.0;
- }
- if (len < rps) rps = len;
- }
- }
- // Uninfect tetrahedra and clear 'neightetlist'.
- for (i = 0; i < neightetlist->len(); i++) {
- starttet = * (triface *)(* neightetlist)[i];
- uninfect(starttet);
- }
- neightetlist->clear();
- } else {
- // A non-acute or dangling vertex.
- rps = 0.0;
- }
- // Return the local feature size of pointloop.
- index = pointmark(pointloop) - in->firstnumber;
- rpsarray[index] = rps;
- pointloop = pointtraverse();
- }
-
- delete neightetlist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// marksharpfacets() Make a map of facets which form sharp corners. //
-// //
-// A sharp corner between two facets has a dihedral angle smaller than the //
-// 'dihedbound' (in degrees). The map is returned in an integer array //
-// 'idx2facetlist'. If idx2facetlist[facetidx - 1] is '1', it means that //
-// facet form a sharp corner with other facet. //
-// //
-// NOTE: idx2facetlist is created inside this routine, don't forget to free //
-// it after using. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::marksharpfacets(int*& idx2facetlist, REAL dihedbound)
-{
- list *incishlist;
- triface adjtet;
- face segloop, prevseg, checkseg;
- face subloop, parentsh, spinsh;
- face neighsh, checksh;
- point eorg, edest;
- REAL anglebound, angle;
- int facetidx;
- int i, j;
-
- if (b->verbose) {
- printf(" Marking facets have sharp corners.\n");
- }
-
- anglebound = dihedbound * 3.1415926535897932 / 180.;
- // Create and initialize 'idx2facetlist'.
- idx2facetlist = new int[in->numberoffacets + 1];
- for (i = 0; i < in->numberoffacets + 1; i++) idx2facetlist[i] = 0;
- // A list keeps incident and not co-facet subfaces around a subsegment.
- incishlist = new list(sizeof(face), NULL);
-
- // Loop the set of subsegments once, counter the number of incident
- // facets of each facet.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- // A subsegment may be split into many pieces, we only need one piece
- // for getting the incident facets. Only operate on the one which
- // contains the origin of the unsplit subsegment.
- segloop.shver = 0;
- senext2(segloop, prevseg);
- spivotself(prevseg);
- if (prevseg.sh == dummysh) {
- // Operate on this subsegment.
- segloop.shver = 0;
- spivot(segloop, parentsh);
- assert(parentsh.sh != dummysh);
- spivot(parentsh, spinsh);
- if (spinsh.sh != parentsh.sh) {
- // This subface is not self-bonded.
- eorg = sorg(segloop);
- edest = sdest(segloop);
- // Get all incident subfaces around 'segloop'.
- spinsh = parentsh;
- do {
- if (sorg(spinsh) != eorg) {
- sesymself(spinsh);
- }
- incishlist->append(&spinsh);
- spivotself(spinsh);
- } while (spinsh.sh != parentsh.sh);
- // Check the pair of adjacent subfaces for small angle.
- spinsh = * (face *)(* incishlist)[0];
- for (i = 1; i <= incishlist->len(); i++) {
- if (i == incishlist->len()) {
- neighsh = * (face *)(* incishlist)[0];
- } else {
- neighsh = * (face *)(* incishlist)[i];
- }
- // Only do test when the side spinsh is faceing inward.
- stpivot(spinsh, adjtet);
- if (adjtet.tet != dummytet) {
- angle = facedihedral(eorg, edest, sapex(spinsh), sapex(neighsh));
- if (angle < anglebound) {
- facetidx = shellmark(spinsh);
- idx2facetlist[facetidx - 1] = 1;
- facetidx = shellmark(neighsh);
- idx2facetlist[facetidx - 1] = 1;
- }
- }
- spinsh = neighsh;
- }
- incishlist->clear();
- }
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
-
- // Ensure all the sharp facets are marked. The mergefacet() operation
- // may leave several facets having different markers merged.
- incishlist->clear();
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- // Only operate on sharp and unmarked subfaces.
- facetidx = shellmark(subloop);
- if (!sinfected(subloop) && (idx2facetlist[facetidx - 1] == 1)) {
- sinfect(subloop);
- incishlist->append(&subloop);
- // Find out all subfaces of this facet (bounded by subsegments).
- for (i = 0; i < incishlist->len(); i++) {
- neighsh = * (face *) (* incishlist)[i];
- for (j = 0; j < 3; j++) {
- sspivot(neighsh, checkseg);
- if (checkseg.sh == dummysh) {
- spivot(neighsh, checksh);
- if (!sinfected(checksh)) {
- // 'checksh' is in the same facet as 'subloop'.
- sinfect(checksh);
- // Check if it is marked.
- facetidx = shellmark(checksh);
- if (idx2facetlist[facetidx - 1] == 0) {
- idx2facetlist[facetidx - 1] = 1;
- }
- incishlist->append(&checksh);
- }
- }
- senextself(neighsh);
- }
- }
- incishlist->clear();
- }
- subloop.sh = shellfacetraverse(subfaces);
- }
- // Uninfect all sharp subfaces.
- subfaces->traversalinit();
- subloop.sh = shellfacetraverse(subfaces);
- while (subloop.sh != (shellface *) NULL) {
- if (sinfected(subloop)) {
- facetidx = shellmark(subloop);
- assert(idx2facetlist[facetidx - 1] == 1);
- suninfect(subloop);
- }
- subloop.sh = shellfacetraverse(subfaces);
- }
-
- delete incishlist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// enqueuebadtet() Add a bad tetrahedron to the end of a queue. //
-// //
-// The queue is actually a set of 64 queues. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::
-enqueuebadtet(triface *instet, REAL ratio, point insorg, point insdest,
- point insapex, point insoppo, point inscent)
-{
- badtetrahedron *newtet;
- int queuenumber;
-
- // Allocate space for the bad tetrahedron.
- newtet = (badtetrahedron *) badtetrahedrons->alloc();
- newtet->tet = *instet;
- newtet->key = ratio;
- newtet->cent[0] = inscent[0];
- newtet->cent[1] = inscent[1];
- newtet->cent[2] = inscent[2];
- newtet->tetorg = insorg;
- newtet->tetdest = insdest;
- newtet->tetapex = insapex;
- newtet->tetoppo = insoppo;
- newtet->nexttet = (badtetrahedron *) NULL;
- // Determine the appropriate queue to put the bad tetrahedron into.
- if (ratio > b->goodratio) {
- queuenumber = (int) ((ratio - b->goodratio) / 0.5);
- // 'queuenumber' may overflow (negative) caused by a very large ratio.
- if ((queuenumber > 63) || (queuenumber < 0)) {
- queuenumber = 63;
- }
- } else {
- // It's not a bad ratio; put the tet in the lowest-priority queue.
- queuenumber = 0;
- }
- // Add the tetrahedron to the end of a queue.
- *tetquetail[queuenumber] = newtet;
- // Maintain a pointer to the NULL pointer at the end of the queue.
- tetquetail[queuenumber] = &newtet->nexttet;
-
- if (b->verbose > 2) {
- printf(" Queueing bad tet: (%d, %d, %d, %d), ratio %g, qnum %d.\n",
- pointmark(insorg), pointmark(insdest), pointmark(insapex),
- pointmark(insoppo), sqrt(ratio), queuenumber);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// dequeuebadtet() Remove a tetrahedron from the front of the queue. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::badtetrahedron* tetgenmesh::dequeuebadtet()
-{
- badtetrahedron *result;
- int queuenumber;
-
- // Look for a nonempty queue.
- for (queuenumber = 63; queuenumber >= 0; queuenumber--) {
- result = tetquefront[queuenumber];
- if (result != (badtetrahedron *) NULL) {
- // Remove the tetrahedron from the queue.
- tetquefront[queuenumber] = result->nexttet;
- // Maintain a pointer to the NULL pointer at the end of the queue.
- if (tetquefront[queuenumber] == (badtetrahedron *) NULL) {
- tetquetail[queuenumber] = &tetquefront[queuenumber];
- }
- return result;
- }
- }
- return (badtetrahedron *) NULL;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checkseg4encroach() Check a subsegment to see if it is encroached. //
-// //
-// A subsegment is encroached if there is a vertex in its diametral circle //
-// (that is, the subsegment faces an angle greater than 90 degrees). //
-// //
-// If 'testpt' is not NULL, only check whether 'testsubseg' is encroached by //
-// it or not. Otherwise, check all apexes of faces containing 'testsubseg', //
-// to see if there is one encroaches it. //
-// //
-// If 'enqueueflag' is TRUE, add 'testsubseg' to queue 'badsubsegs' if it is //
-// encroached. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-checkseg4encroach(face* testsubseg, point testpt, bool enqueueflag)
-{
- badface *encsubseg;
- triface starttet, spintet;
- point eorg, edest, eapex, encpt;
- REAL cent[3], radius, dist, diff;
- bool enq;
- int hitbdry;
-
- eorg = sorg(*testsubseg);
- edest = sdest(*testsubseg);
- cent[0] = 0.5 * (eorg[0] + edest[0]);
- cent[1] = 0.5 * (eorg[1] + edest[1]);
- cent[2] = 0.5 * (eorg[2] + edest[2]);
- radius = distance(cent, eorg);
-
- enq = false;
- encpt = (point) NULL;
- if (testpt == (point) NULL) {
- // Check if it is encroached by traversing all faces containing it.
- sstpivot(testsubseg, &starttet);
- eapex = apex(starttet);
- spintet = starttet;
- hitbdry = 0;
- do {
- dist = distance(cent, apex(spintet));
- diff = dist - radius;
- if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
- if (diff < 0.0) {
- enq = true;
- encpt = apex(spintet);
- break;
- }
- if (!fnextself(spintet)) {
- hitbdry++;
- if (hitbdry < 2) {
- esym(starttet, spintet);
- if (!fnextself(spintet)) {
- hitbdry++;
- }
- }
- }
- } while (apex(spintet) != eapex && (hitbdry < 2));
- } else {
- // Only check if 'testsubseg' is encroached by 'testpt'.
- dist = distance(cent, testpt);
- diff = dist - radius;
- if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
- if (diff < 0.0) {
- enq = true;
- }
- }
-
- if (enq && enqueueflag) {
- if (b->verbose > 2) {
- printf(" Queuing encroaching subsegment (%d, %d).\n",
- pointmark(eorg), pointmark(edest));
- }
- encsubseg = (badface *) badsubsegs->alloc();
- encsubseg->ss = *testsubseg;
- encsubseg->forg = eorg;
- encsubseg->fdest = edest;
- encsubseg->foppo = encpt;
- // Set the pointer of 'encsubseg' into 'testseg'. It has two purposes:
- // (1) We can regonize it is encroached; (2) It is uniquely queued.
- setshell2badface(encsubseg->ss, encsubseg);
- }
-
- return enq;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checksub4encroach() Check a subface to see if it is encroached. If so, //
-// add it to the list. //
-// //
-// A subface is encroached if there is a vertex in its diametral sphere. If //
-// 'testpt != NULL', only test if 'testsub' is encroached by it. Otherwise, //
-// test the opposites of the adjoining tetrahedra of 'testsub' at both side //
-// to see whether it is encroached or not. If 'enqueueflag = TRUE', add //
-// 'testsub' into pool 'badsubfaces'. Return TRUE if 'testsub' is encroached,//
-// return FALSE if it is not. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::
-checksub4encroach(face* testsub, point testpt, bool enqueueflag)
-{
- badface *encsub;
- triface abuttet;
- point forg, fdest, fapex, encpt;
- REAL cent[3], radius, dist, diff;
- bool enq, bqual, ncollinear;
- int quenumber, i;
-
- enq = false;
- encpt = (point) NULL;
- bqual = checksub4badqual(testsub);
-
- if (!bqual) {
- forg = sorg(*testsub);
- fdest = sdest(*testsub);
- fapex = sapex(*testsub);
- ncollinear = circumsphere(forg, fdest, fapex, NULL, cent, &radius);
- assert(ncollinear == true);
-
- if (testpt == (point) NULL) {
- stpivot(*testsub, abuttet);
- if (abuttet.tet != dummytet) {
- dist = distance(cent, oppo(abuttet));
- diff = dist - radius;
- if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
- enq = diff < 0.0;
- if (enq) encpt = oppo(abuttet);
- }
- if (!enq) {
- sesymself(*testsub);
- stpivot(*testsub, abuttet);
- if (abuttet.tet != dummytet) {
- dist = distance(cent, oppo(abuttet));
- diff = dist - radius;
- if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
- enq = diff < 0.0;
- if (enq) encpt = oppo(abuttet);
- }
- }
- } else {
- // Only do test when 'testpt' is one of its corners.
- if (testpt != forg && testpt != fdest && testpt != fapex) {
- dist = distance(cent, testpt);
- diff = dist - radius;
- if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
- enq = diff < 0.0;
- }
- }
- }
-
- if ((enq || bqual) && enqueueflag) {
- encsub = (badface *) badsubfaces->alloc();
- encsub->ss = *testsub;
- encsub->forg = sorg(*testsub);
- encsub->fdest = sdest(*testsub);
- encsub->fapex = sapex(*testsub);
- encsub->foppo = encpt;
- if (enq) {
- for (i = 0; i < 3; i++) encsub->cent[i] = cent[i];
- } else {
- for (i = 0; i < 3; i++) encsub->cent[i] = 0.0;
- }
- encsub->nextface = (badface *) NULL;
- // Set the pointer of 'encsubseg' into 'testsub'. It has two purposes:
- // (1) We can regonize it is encroached; (2) It is uniquely queued.
- setshell2badface(encsub->ss, encsub);
- quenumber = bqual ? 1 : 0;
- // Add the subface to the end of a queue.
- *subquetail[quenumber] = encsub;
- // Maintain a pointer to the NULL pointer at the end of the queue.
- subquetail[quenumber] = &encsub->nextface;
- if (b->verbose > 2) {
- printf(" Queuing %s subface (%d, %d, %d).\n",
- enq ? "encroached" : "badqual", pointmark(encsub->forg),
- pointmark(encsub->fdest), pointmark(encsub->fapex));
- }
- }
-
- return enq || bqual;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checksub4badquality() Test if the quality of a subface is bad. //
-// //
-// A subface has bad quality if: (1) its minimum internal angle is smaller //
-// than 20 degree; or (2) its area is larger than a maximum area condition. //
-// Return TRUE if it is bad. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::checksub4badqual(face* testsub)
-{
- face sametestsub;
- face subseg1, subseg2;
- point torg, tdest, tapex;
- point anglevertex;
- REAL dxod, dyod, dzod;
- REAL dxda, dyda, dzda;
- REAL dxao, dyao, dzao;
- REAL dxod2, dyod2, dzod2;
- REAL dxda2, dyda2, dzda2;
- REAL dxao2, dyao2, dzao2;
- REAL apexlen, orglen, destlen;
- REAL angle, area;
- bool enq;
-
- enq = false;
- torg = sorg(*testsub);
- tdest = sdest(*testsub);
- tapex = sapex(*testsub);
- dxod = torg[0] - tdest[0];
- dyod = torg[1] - tdest[1];
- dzod = torg[2] - tdest[2];
- dxda = tdest[0] - tapex[0];
- dyda = tdest[1] - tapex[1];
- dzda = tdest[2] - tapex[2];
- dxao = tapex[0] - torg[0];
- dyao = tapex[1] - torg[1];
- dzao = tapex[2] - torg[2];
- dxod2 = dxod * dxod;
- dyod2 = dyod * dyod;
- dzod2 = dzod * dzod;
- dxda2 = dxda * dxda;
- dyda2 = dyda * dyda;
- dzda2 = dzda * dzda;
- dxao2 = dxao * dxao;
- dyao2 = dyao * dyao;
- dzao2 = dzao * dzao;
- // Find the lengths of the triangle's three edges.
- apexlen = dxod2 + dyod2 + dzod2;
- orglen = dxda2 + dyda2 + dzda2;
- destlen = dxao2 + dyao2 + dzao2;
- if ((apexlen < orglen) && (apexlen < destlen)) {
- // The edge opposite the apex is shortest.
- // Find the square of the cosine of the angle at the apex.
- angle = dxda * dxao + dyda * dyao + dzda * dzao;
- angle = angle * angle / (orglen * destlen);
- anglevertex = tapex;
- senext(*testsub, sametestsub);
- sspivot(sametestsub, subseg1);
- senext2(*testsub, sametestsub);
- sspivot(sametestsub, subseg2);
- } else if (orglen < destlen) {
- // The edge opposite the origin is shortest.
- // Find the square of the cosine of the angle at the origin.
- angle = dxod * dxao + dyod * dyao + dzod * dzao;
- angle = angle * angle / (apexlen * destlen);
- anglevertex = torg;
- sspivot(*testsub, subseg1);
- senext2(*testsub, sametestsub);
- sspivot(sametestsub, subseg2);
- } else {
- // The edge opposite the destination is shortest.
- // Find the square of the cosine of the angle at the destination.
- angle = dxod * dxda + dyod * dyda + dzod * dzda;
- angle = angle * angle / (apexlen * orglen);
- anglevertex = tdest;
- sspivot(*testsub, subseg1);
- senext(*testsub, sametestsub);
- sspivot(sametestsub, subseg2);
- }
-
- // Check if both edges that form the angle are segments.
- if ((subseg1.sh != dummysh) && (subseg2.sh != dummysh)) {
- // The angle is a segment intersection. Don't add this bad subface to
- // the list; there's nothing that can be done about a small angle
- // between two segments.
- angle = 0.0;
- } else if (pointtype(anglevertex) == ACUTEVERTEX) {
- // If the small angle vertex is acute, do not refine this face.
- angle = 0.0;
- }
-
- // Check whether the angle is smaller than permitted.
- if (angle > b->goodangle) {
- enq = true;
- }
-
- if (!enq && areabound(*testsub) > 0.0) {
- // Check whether the area is larger than desired. A variation form of
- // Heron's formula which only uses the squares of the edge lengthes
- // is used to calculated the area of a 3D triangle.
- area = apexlen + orglen - destlen;
- area = area * area;
- area = 4 * apexlen * orglen - area;
- area = 0.25 * sqrt(fabs(area));
- if (area > areabound(*testsub)) {
- enq = true;
- }
- }
-
- return enq;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checktet4badqual() Test a tetrahedron for quality measures. //
-// //
-// Tests a tetrahedron to see if it satisfies the minimum ratio condition //
-// and the maximum volume condition. Tetrahedra that aren't upto spec are //
-// added to the bad tetrahedron queue. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::checktet4badqual(triface* testtet)
-{
- point torg, tdest, tapex, toppo;
- REAL dxod, dyod, dzod, dxda, dyda, dzda, dxao, dyao, dzao;
- REAL dxop, dyop, dzop, dxdp, dydp, dzdp, dxap, dyap, dzap;
- REAL dxod2, dyod2, dzod2, dxda2, dyda2, dzda2, dxao2, dyao2, dzao2;
- REAL dxop2, dyop2, dzop2, dxdp2, dydp2, dzdp2, dxap2, dyap2, dzap2;
- REAL dxoc, dyoc, dzoc, dxoc2, dyoc2, dzoc2;
- REAL edgelen[6], cent[3];
- REAL smedgelen, averlen, volume;
- REAL radius, ratio2;
- int i;
-
- torg = org(*testtet);
- tdest = dest(*testtet);
- tapex = apex(*testtet);
- toppo = oppo(*testtet);
-
- dxod = torg[0] - tdest[0];
- dyod = torg[1] - tdest[1];
- dzod = torg[2] - tdest[2];
- dxda = tdest[0] - tapex[0];
- dyda = tdest[1] - tapex[1];
- dzda = tdest[2] - tapex[2];
- dxao = tapex[0] - torg[0];
- dyao = tapex[1] - torg[1];
- dzao = tapex[2] - torg[2];
-
- dxop = torg[0] - toppo[0];
- dyop = torg[1] - toppo[1];
- dzop = torg[2] - toppo[2];
- dxdp = tdest[0] - toppo[0];
- dydp = tdest[1] - toppo[1];
- dzdp = tdest[2] - toppo[2];
- dxap = tapex[0] - toppo[0];
- dyap = tapex[1] - toppo[1];
- dzap = tapex[2] - toppo[2];
-
- dxod2 = dxod * dxod;
- dyod2 = dyod * dyod;
- dzod2 = dzod * dzod;
- dxda2 = dxda * dxda;
- dyda2 = dyda * dyda;
- dzda2 = dzda * dzda;
- dxao2 = dxao * dxao;
- dyao2 = dyao * dyao;
- dzao2 = dzao * dzao;
-
- dxop2 = dxop * dxop;
- dyop2 = dyop * dyop;
- dzop2 = dzop * dzop;
- dxdp2 = dxdp * dxdp;
- dydp2 = dydp * dydp;
- dzdp2 = dzdp * dzdp;
- dxap2 = dxap * dxap;
- dyap2 = dyap * dyap;
- dzap2 = dzap * dzap;
-
- // Find the smallest edge length of 'testtet'.
- edgelen[0] = dxod2 + dyod2 + dzod2;
- edgelen[1] = dxda2 + dyda2 + dzda2;
- edgelen[2] = dxao2 + dyao2 + dzao2;
- edgelen[3] = dxop2 + dyop2 + dzop2;
- edgelen[4] = dxdp2 + dydp2 + dzdp2;
- edgelen[5] = dxap2 + dyap2 + dzap2;
- smedgelen = averlen = edgelen[0];
- for (i = 1; i < 6; i++) {
- averlen += sqrt(edgelen[i]);
- if (smedgelen > edgelen[i]) {
- smedgelen = edgelen[i];
- }
- }
- averlen /= 6.0;
-
- // Find the circumcenter and circumradius of 'testtet'.
- circumsphere(torg, tdest, tapex, toppo, cent, NULL);
- dxoc = torg[0] - cent[0];
- dyoc = torg[1] - cent[1];
- dzoc = torg[2] - cent[2];
- dxoc2 = dxoc * dxoc;
- dyoc2 = dyoc * dyoc;
- dzoc2 = dzoc * dzoc;
- radius = dxoc2 + dyoc2 + dzoc2;
-
- // Calculate the square of radius-edge ratio.
- ratio2 = radius / smedgelen;
-
- // Check whether the ratio is smaller than permitted.
- if (ratio2 > b->goodratio) {
- // Add this tet to the list of bad tetrahedra.
- enqueuebadtet(testtet, ratio2, torg, tdest, tapex, toppo, cent);
- return true;
- }
- if (b->varvolume || b->fixedvolume) {
- volume = orient3d(torg, tdest, tapex, toppo);
- if (volume < 0) volume = -volume;
- volume /= 6.0;
- // Check whether the volume is larger than permitted.
- if (b->fixedvolume && (volume > b->maxvolume)) {
- // Add this tetrahedron to the list of bad tetrahedra.
- enqueuebadtet(testtet, 0, torg, tdest, tapex, toppo, cent);
- return true;
- } else if (b->varvolume) {
- // Nonpositive volume constraints are treated as unconstrained.
- if ((volume > volumebound(testtet->tet)) &&
- (volumebound(testtet->tet) > 0.0)) {
- // Add this tetrahedron to the list of bad tetrahedron.
- enqueuebadtet(testtet, 0, torg, tdest, tapex, toppo, cent);
- return true;
- }
- }
- }
- return false;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checktet4illtet() Test a tetrahedron to see if it is illegal. //
-// //
-// A tetrahedron is assumed as illegal if its four corners are defined on //
-// one facet. A tetrahedron has zero volume is illegal. Add it into queue //
-// if it is illegal. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::checktet4illtet(triface* testtet, list* illtetlist)
-{
- badtetrahedron *badtet;
- triface neighface;
- face testsh, neighsh, testseg;
- bool isill;
- int i;
-
- isill = false;
- testtet->loc = 0;
- testtet->ver = 0;
- tspivot(*testtet, testsh); // edge ab
- if (testsh.sh != dummysh) {
- // Check subfaces at edges ab, bc, ca.
- findedge(&testsh, org(*testtet), dest(*testtet));
- for (i = 0; i < 3; i++) {
- sspivot(testsh, testseg);
- if (testseg.sh == dummysh) {
- fnext(*testtet, neighface);
- tspivot(neighface, neighsh);
- if (neighsh.sh != dummysh) {
- isill = true;
- break;
- }
- }
- enextself(*testtet);
- senextself(testsh);
- }
- }
- if (!isill) {
- testtet->loc = 0;
- testtet->ver = 0;
- fnextself(*testtet);
- esymself(*testtet);
- tspivot(*testtet, testsh);
- if (testsh.sh != dummysh) {
- // Check subfaces at edges ad, db.
- findedge(&testsh, org(*testtet), dest(*testtet));
- for (i = 0; i < 2; i++) {
- enextself(*testtet);
- senextself(testsh);
- sspivot(testsh, testseg);
- if (testseg.sh == dummysh) {
- fnext(*testtet, neighface);
- tspivot(neighface, neighsh);
- if (neighsh.sh != dummysh) {
- isill = true;
- break;
- }
- }
- }
- }
- }
- if (!isill) {
- testtet->loc = 0;
- testtet->ver = 0;
- enextfnextself(*testtet);
- esymself(*testtet);
- enext2self(*testtet); // edge cd.
- tspivot(*testtet, testsh);
- if (testsh.sh != dummysh) {
- findedge(&testsh, org(*testtet), dest(*testtet));
- sspivot(testsh, testseg);
- if (testseg.sh == dummysh) {
- fnext(*testtet, neighface);
- tspivot(neighface, neighsh);
- if (neighsh.sh != dummysh) {
- isill = true;
- }
- }
- }
- }
- if (isill) {
- badtet = (badtetrahedron *) illtetlist->append(NULL);
- badtet->tet = *testtet;
- badtet->tetorg = org(*testtet);
- badtet->tetdest = dest(*testtet);
- badtet->tetapex = apex(*testtet);
- badtet->tetoppo = oppo(*testtet);
- if (b->verbose > 2) {
- printf(" Queuing illtet (%d, %d, %d, %d).\n",
- pointmark(badtet->tetorg), pointmark(badtet->tetdest),
- pointmark(badtet->tetapex), pointmark(badtet->tetoppo));
- }
- }
- return isill;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checktet4sliver() Test a tetrahedron for large dihedral angle. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::checktet4sliver(triface* testtet, list* illtetlist)
-{
- badtetrahedron *badtet;
- point pa, pb, pc, pd;
- REAL dihed[6];
- bool issliver;
-
- pa = (point) testtet->tet[4];
- pb = (point) testtet->tet[5];
- pc = (point) testtet->tet[6];
- pd = (point) testtet->tet[7];
- tetalldihedral(pa, pb, pc, pd, dihed);
-
- issliver = false;
- testtet->loc = 0;
- testtet->ver = 0;
- if (dihed[0] > b->maxdihedral) { // Edge ab
- issliver = true;
- }
- if (!issliver && (dihed[1] > b->maxdihedral)) { // Edge ac
- enext2self(*testtet);
- issliver = true;
- }
- if (!issliver && (dihed[2] > b->maxdihedral)) { // Edge ad
- fnextself(*testtet);
- enext2self(*testtet);
- esymself(*testtet);
- issliver = true;
- }
- if (!issliver && (dihed[3] > b->maxdihedral)) { // Edge bc
- enextself(*testtet);
- issliver = true;
- }
- if (!issliver && (dihed[4] > b->maxdihedral)) { // Edge bd
- fnextself(*testtet);
- enextself(*testtet);
- esymself(*testtet);
- issliver = true;
- }
- if (!issliver && (dihed[5] > b->maxdihedral)) { // Edge cd
- enextfnextself(*testtet);
- enextself(*testtet);
- esymself(*testtet);
- issliver = true;
- }
-
- if (issliver) {
- badtet = (badtetrahedron *) illtetlist->append(NULL);
- badtet->tet = *testtet;
- badtet->tetorg = org(*testtet);
- badtet->tetdest = dest(*testtet);
- badtet->tetapex = apex(*testtet);
- badtet->tetoppo = oppo(*testtet);
- if (b->verbose > 2) {
- printf(" Queuing sliver (%d, %d, %d, %d).\n",
- pointmark(badtet->tetorg), pointmark(badtet->tetdest),
- pointmark(badtet->tetapex), pointmark(badtet->tetoppo));
- }
- }
- return issliver;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checkseg4splitting() Check an encroached subsegment to see if it is //
-// suitable to be split. //
-// //
-// If a subsegment is one of edges of a subface which is on the sharp corner,//
-// it is not suitable to be split. If the volume constraint is set, it is //
-// still suitable to be split if there is a tetrahedron around it which has //
-// volume larger than volumebound. To avoid resulting too skinny tetrahedron,//
-// we compare the longest edge length to the cubic root of volumebound. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::checkseg4splitting(face* testseg, REAL* rpsarray, bool bqual)
-{
- triface spintet;
- face parentsh, spinsh;
- point eorg, edest, fapex;
- bool acuteorg, acutedest;
- REAL rpslimit;
- REAL L, L3;
- int ptidx;
-
- eorg = sorg(*testseg);
- edest = sdest(*testseg);
- acuteorg = pointtype(eorg) == ACUTEVERTEX;
- acutedest = pointtype(edest) == ACUTEVERTEX;
- if ((acuteorg && acutedest) || (!acuteorg && !acutedest)) {
- // Can be split.
- return true;
- }
- // Now exactly one vertex is acute.
- assert(acuteorg || acutedest);
- if (!bqual) {
- // We're not forced to split it. However, if it is encroached by an
- // existing vertex, we must split it, otherwise, not split it.
- return checkseg4encroach(testseg, NULL, false);
- }
-
- L = distance(eorg, edest);
- if (acuteorg) {
- ptidx = pointmark(eorg) - in->firstnumber;
- } else {
- assert(acutedest);
- ptidx = pointmark(edest) - in->firstnumber;
- }
- rpslimit = rpsarray[ptidx] / 4.0;
- if (L > (rpslimit * 1.1)) {
- // The edge is not too small, can be split.
- return true;
- }
- // L <= rpslimit. We should not split it. However, it may still be
- // split if its length is too long wrt. the volume constraints.
- if (b->varvolume || b->fixedvolume) {
- L3 = L * L * L / 6.0;
- if (b->fixedvolume && (L3 > b->maxvolume)) {
- // This edge is too long wrt. the maximum volume bound. Split it.
- return true;
- }
- if (b->varvolume) {
- spivot(*testseg, parentsh);
- if (sorg(parentsh) != eorg) sesymself(parentsh);
- stpivot(parentsh, spintet);
- if (spintet.tet == dummytet) {
- sesymself(parentsh);
- stpivot(parentsh, spintet);
- assert(spintet.tet != dummytet);
- }
- findedge(&spintet, eorg, edest);
- fapex = apex(spintet);
- while (true) {
- if (!fnextself(spintet)) {
- // Meet a boundary, walk through it.
- tspivot(spintet, spinsh);
- assert(spinsh.sh != dummysh);
- findedge(&spinsh, eorg, edest);
- sfnextself(spinsh);
- stpivot(spinsh, spintet);
- assert(spintet.tet != dummytet);
- findedge(&spintet, eorg, edest);
- }
- if ((L3 > volumebound(spintet.tet)) &&
- (volumebound(spintet.tet) > 0.0)) {
- // This edge is too long wrt. the maximum volume bound. Split it.
- return true;
- }
- if (apex(spintet) == fapex) break;
- }
- }
- }
-
- // Not split it.
- return false;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checksub4splitting() Check an encroached subface to see if it is //
-// suitable to be split. //
-// //
-// If a subface is on the sharp corner, it is not suitable to be split. If //
-// the volume constraint is set, it is still suitable to be split if there //
-// is a tetrahedron around it which has volume larger than volumebound. To //
-// avoid resulting too skinny tet, we compare the longest edge length to the //
-// cubic root of volumebound. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::checksub4splitting(face* testsh)
-{
- triface testtet;
- point p[3];
- REAL L, L3;
- int i;
-
- if (b->varvolume || b->fixedvolume) {
- // Check if all the tetrahedra having this subface are conforming to
- // the volume bound specified in b.maxvolume. Here we don't use each
- // tetrahedron's volume for comparsion, instead is an approximate
- // volume (one sixth of the cubic of its longest edge length). We
- // hope this way can find skinny tetrahedra and split them.
- p[0] = sorg(*testsh);
- p[1] = sdest(*testsh);
- p[2] = sapex(*testsh);
- // Get the longest edge length of testsh = L.
- L = distance(p[0], p[1]);
- L3 = distance(p[1], p[2]);
- L = (L >= L3 ? L : L3);
- L3 = distance(p[2], p[0]);
- L = (L >= L3 ? L : L3);
-
- L3 = L * L * L / 6.0;
- if (b->fixedvolume && (L3 > b->maxvolume)) {
- // This face is too large wrt. the maximum volume bound. Split it.
- return true;
- }
- if (b->varvolume) {
- for (i = 0; i < 2; i ++) {
- stpivot(*testsh, testtet);
- if (testtet.tet != dummytet) {
- if ((L3 > volumebound(testtet.tet)) &&
- (volumebound(testtet.tet) > 0.0)) {
- // This face is too large wrt. the maximum volume bound.
- return true;
- }
- }
- sesymself(*testsh);
- }
- }
- }
- return false;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// doqualchecktetlist() Put bad-quality tetrahedra in 'qualchecktetlist' //
-// into queue and clear it. //
-// //
-// 'qualchecktetlist' stores a list of tetrahedra which are possibly bad- //
-// quality, furthermore, one tetrahedron may appear many times in it. For //
-// testing and queuing each bad-quality tetrahedron only once, infect it //
-// after testing, later on, only test the one which is not infected. On //
-// finish, uninfect them. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::doqualchecktetlist()
-{
- triface testtet;
- int i;
-
- for (i = 0; i < qualchecktetlist->len(); i++) {
- testtet = * (triface *) (* qualchecktetlist)[i];
- if (!isdead(&testtet) && !infected(testtet)) {
- checktet4badqual(&testtet);
- infect(testtet);
- }
- }
- for (i = 0; i < qualchecktetlist->len(); i++) {
- testtet = * (triface *) (* qualchecktetlist)[i];
- if (!isdead(&testtet) && infected(testtet)) {
- uninfect(testtet);
- }
- }
- qualchecktetlist->clear();
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tallencsegs() Check for encroached segments, save them in list. //
-// //
-// If both 'testpt' and 'cavtetlist' are not NULLs, then check the segments //
-// in 'cavtetlist' to see if they're encroached by 'testpt'. Otherwise, //
-// check the entire list of segments to see if they're encroached by any of //
-// mesh vertices. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::tallencsegs(point testpt, list *cavtetlist)
-{
- triface starttet, neightet;
- face checkseg;
- long oldencnum;
- int i, j;
-
- // Remember the current number of encroached segments.
- oldencnum = badsubsegs->items;
-
- if (cavtetlist != (list *) NULL) {
- assert(testpt != (point) NULL);
- // Check segments in the list of tetrahedra.
- for (i = 0; i < cavtetlist->len(); i++) {
- starttet = * (triface *)(* cavtetlist)[i];
- infect(starttet); // Indicate it has been tested.
- sym(starttet, neightet);
- if (!infected(neightet)) {
- // Test all three edges of this face.
- for (j = 0; j < 3; j++) {
- tsspivot(&starttet, &checkseg);
- if (checkseg.sh != dummysh) {
- if (!shell2badface(checkseg)) {
- checkseg4encroach(&checkseg, testpt, true);
- }
- }
- enextself(starttet);
- }
- }
- adjustedgering(starttet, CCW);
- fnext(starttet, neightet);
- symself(neightet);
- if ((neightet.tet == dummytet) || !infected(neightet)) {
- fnext(starttet, neightet);
- // Test the tow other edges of this face.
- for (j = 0; j < 2; j++) {
- enextself(neightet);
- tsspivot(&neightet, &checkseg);
- if (checkseg.sh != dummysh) {
- if (!shell2badface(checkseg)) {
- checkseg4encroach(&checkseg, testpt, true);
- }
- }
- }
- }
- enextfnext(starttet, neightet);
- symself(neightet);
- if ((neightet.tet == dummytet) || !infected(neightet)) {
- enextfnext(starttet, neightet);
- // Only test the next edge of this face.
- enextself(neightet);
- tsspivot(&neightet, &checkseg);
- if (checkseg.sh != dummysh) {
- if (!shell2badface(checkseg)) {
- checkseg4encroach(&checkseg, testpt, true);
- }
- }
- }
- }
- // Uninfect all tetrahedra in the list.
- for (i = 0; i < cavtetlist->len(); i++) {
- starttet = * (triface *)(* cavtetlist)[i];
- assert(infected(starttet));
- uninfect(starttet);
- }
- } else {
- // Check the entire list of segments.
- subsegs->traversalinit();
- checkseg.sh = shellfacetraverse(subsegs);
- while (checkseg.sh != (shellface *) NULL) {
- checkseg4encroach(&checkseg, NULL, true);
- checkseg.sh = shellfacetraverse(subsegs);
- }
- }
-
- return (badsubsegs->items > oldencnum);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tallencsubs() Find all encroached subfaces and save them in list. //
-// //
-// If 'cavtetlist' and 'testpt' are not NULL, only check subfaces which are //
-// in cavtetlist. Otherwise check all subfaces in current mesh. If 'protonly'//
-// is TRUE, only check subfaces which are in protecting cylinders & spheres. //
-// Return TRUE if at least one encorached subface is found. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-bool tetgenmesh::tallencsubs(point testpt, list* cavtetlist)
-{
- triface starttet, neightet;
- face checksh;
- long oldencnum;
- int i, j;
-
- // Remember the current number of encroached segments.
- oldencnum = badsubfaces->items;
-
- if (cavtetlist != (list *) NULL) {
- assert(testpt != (point) NULL);
- // Check subfaces in the list of tetrahedra.
- for (i = 0; i < cavtetlist->len(); i++) {
- starttet = * (triface *)(* cavtetlist)[i];
- infect(starttet); // Indicate it has been tested.
- sym(starttet, neightet);
- if (!infected(neightet)) {
- // Test if this face is encroached.
- tspivot(starttet, checksh);
- if (checksh.sh != dummysh) {
- // If it is not encroached, test it.
- if (shell2badface(checksh) == NULL) {
- checksub4encroach(&checksh, testpt, true);
- }
- }
- }
- adjustedgering(starttet, CCW);
- // Check the other three sides of this tet.
- for (j = 0; j < 3; j++) {
- fnext(starttet, neightet);
- symself(neightet);
- if ((neightet.tet == dummytet) || !infected(neightet)) {
- fnext(starttet, neightet);
- // Test if this face is encroached.
- tspivot(neightet, checksh);
- if (checksh.sh != dummysh) {
- // If it is not encroached, test it.
- if (shell2badface(checksh) == NULL) {
- checksub4encroach(&checksh, testpt, true);
- }
- }
- }
- enextself(starttet);
- }
- }
- // Uninfect all tetrahedra in the list.
- for (i = 0; i < cavtetlist->len(); i++) {
- starttet = * (triface *)(* cavtetlist)[i];
- assert(infected(starttet));
- uninfect(starttet);
- }
- } else {
- // Check the entire list of subfaces.
- subfaces->traversalinit();
- checksh.sh = shellfacetraverse(subfaces);
- while (checksh.sh != (shellface *) NULL) {
- // If it is not encroached, test it.
- checksub4encroach(&checksh, NULL, true);
- checksh.sh = shellfacetraverse(subfaces);
- }
- }
-
- return (badsubfaces->items > oldencnum);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tallbadtetrahedrons() Test every tetrahedron in the mesh for quality //
-// measures. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::tallbadtetrahedrons()
-{
- triface tetloop;
-
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- checktet4badqual(&tetloop);
- tetloop.tet = tetrahedrontraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tallilltets() Test every tetrahedron in the mesh for illegal tet. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::tallilltets(list* illtetlist)
-{
- triface tetloop;
- REAL bakdihedral;
-
- bakdihedral = b->maxdihedral;
- b->maxdihedral = 3.1415926535897932 * (1.0 - b->epsilon);
-
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- if (!checktet4illtet(&tetloop, illtetlist)) {
- checktet4sliver(&tetloop, illtetlist);
- }
- tetloop.tet = tetrahedrontraverse();
- }
-
- b->maxdihedral = bakdihedral;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tallslivers() Test every tetrahedron in the mesh for sliver checking. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::tallslivers(list* illtetlist)
-{
- triface tetloop;
-
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- checktet4sliver(&tetloop, illtetlist);
- tetloop.tet = tetrahedrontraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// removeilltets() Repair mesh by removing illegal elements. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::removeilltets()
-{
- badtetrahedron *badtet;
- list *illtetlist;
- queue *flipqueue;
- int i;
-
- if (!b->quiet) {
- printf("Removing illegal tetrahedra.\n");
- }
- // Initialize the pool of bad tetrahedra.
- illtetlist = new list(sizeof(badtetrahedron), NULL, 1024);
- // Initialize 'flipqueue'.
- flipqueue = new queue(sizeof(badface));
- // Initialize the pool of recently flipped faces.
- flipstackers = new memorypool(sizeof(flipstacker), 1024, POINTER, 0);
-
- // Test all tetrahedra to see if they're slivers.
- tallilltets(illtetlist);
- do {
- for (i = 0; i < illtetlist->len(); i++) {
- badtet = (badtetrahedron *)(* illtetlist)[i];
- if (!isdead(&badtet->tet) && (org(badtet->tet) == badtet->tetorg) &&
- (dest(badtet->tet) == badtet->tetdest) &&
- (apex(badtet->tet) == badtet->tetapex) &&
- (oppo(badtet->tet) == badtet->tetoppo)) {
- removebadtet(ILLEGAL, &badtet->tet, flipqueue);
- }
- }
- illtetlist->clear();
- tallilltets(illtetlist);
- } while (illtetlist->len() > 0);
-
- delete flipstackers;
- delete flipqueue;
- delete illtetlist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// removeslivers() Repair mesh by removing slivers. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::removeslivers()
-{
- badtetrahedron *badtet;
- list *illtetlist;
- int i;
-
- if (!b->quiet) {
- printf("Removing slivers.\n");
- }
-
- // Initialize the pool of bad tetrahedra.
- illtetlist = new list(sizeof(badtetrahedron), NULL, 1024);
- // Initialize the pool of recently flipped faces.
- flipstackers = new memorypool(sizeof(flipstacker), 1024, POINTER, 0);
-
- // Test all tetrahedra to see if they're slivers.
- tallslivers(illtetlist);
- for (i = 0; i < illtetlist->len(); i++) {
- badtet = (badtetrahedron *)(* illtetlist)[i];
- if (!isdead(&badtet->tet) && (org(badtet->tet) == badtet->tetorg) &&
- (dest(badtet->tet) == badtet->tetdest) &&
- (apex(badtet->tet) == badtet->tetapex) &&
- (oppo(badtet->tet) == badtet->tetoppo)) {
- // It's a sliver, remove it.
- removebadtet(SLIVER, &badtet->tet, NULL);
- }
- }
- illtetlist->clear();
-
- delete flipstackers;
- delete illtetlist;
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// repairencsegs() Repair all the encroached subsegments until no //
-// subsegment is encroached. //
-// //
-// At beginning, all encroached subsegments are stored in pool 'badsubsegs'. //
-// Each encroached subsegment is repaired by splitting it, i.e., inserting a //
-// point somewhere in it. Newly inserted points may encroach upon other //
-// subsegments, these are also repaired. //
-// //
-// After splitting a segment, the Delaunay property of the mesh is recovered //
-// by flip operations. 'flipqueue' returns a list of updated faces which may //
-// be non-locally Delaunay. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::repairencsegs(REAL* rpsarray, bool bqual, queue* flipqueue)
-{
- badface *encloop;
- triface starttet;
- face startsh, spinsh, checksh;
- face splitseg, checkseg;
- point eorg, edest;
- point newpoint, ppt;
- bool acuteorg, acutedest;
- REAL rps, len, split;
- int ptidx, i;
-
- if (b->verbose > 1) {
- printf(" Splitting encroached subsegments.\n");
- }
-
- // Note that steinerleft == -1 if an unlimited number of Steiner points
- // is allowed. Loop until 'badsubsegs' is empty.
- while ((badsubsegs->items > 0) && (steinerleft != 0)) {
- badsubsegs->traversalinit();
- encloop = badfacetraverse(badsubsegs);
- while ((encloop != (badface *) NULL) && (steinerleft != 0)) {
- splitseg = encloop->ss;
- // Every splitseg has a pointer to encloop, now clear it.
- assert(shell2badface(splitseg) == encloop);
- setshell2badface(splitseg, NULL);
- eorg = sorg(splitseg);
- edest = sdest(splitseg);
- assert((eorg == encloop->forg) && (edest == encloop->fdest));
- if (b->verbose > 1) {
- printf(" Get encseg (%d, %d).\n", pointmark(eorg), pointmark(edest));
- }
-
- if (checkseg4splitting(&splitseg, rpsarray, bqual)) {
- // Decide the position to split the segment. Use the cutting sphere
- // if any of the endpoints is acute.
- acuteorg = (pointtype(eorg) == ACUTEVERTEX);
- acutedest = (pointtype(edest) == ACUTEVERTEX);
- if (acuteorg || acutedest) {
- if (!acuteorg) {
- // eorg is not acute, but edest is. Exchange eorg, edest.
- eorg = edest;
- edest = sorg(splitseg);
- }
- // Now, eorg must be acute.
- len = distance(eorg, edest);
- // Get the radius of the current protecting sphere.
- ptidx = pointmark(eorg) - in->firstnumber;
- rps = rpsarray[ptidx];
- // Calculate the suitable radius to split the segment. It should
- // be no larger than half of the segment length.
- while (rps > 0.51 * len) {
- rps *= 0.5;
- }
- assert((rps * 16.0) > rpsarray[ptidx]);
- // Where to split the segment.
- split = rps / len;
- ppt = eorg;
- } else {
- split = 0.5;
- ppt = (point) NULL;
- }
-
- // Create the new point.
- makepoint(&newpoint);
- // Set its coordinates.
- for (i = 0; i < 3; i++) {
- newpoint[i] = eorg[i] + split * (edest[i] - eorg[i]);
- }
- // Interpolate its attributes.
- for (i = 0; i < in->numberofpointattributes; i++) {
- newpoint[i + 3] = eorg[i + 3] + split * (edest[i + 3] - eorg[i + 3]);
- }
- // Set the parent point into the newpoint.
- setpoint2ppt(newpoint, ppt);
- // Set the type of the newpoint.
- setpointtype(newpoint, FREESEGVERTEX);
- // Set splitseg into the newpoint.
- setpoint2sh(newpoint, sencode(splitseg));
-
- // Insert new point into the mesh. It should be always success.
- splitseg.shver = 0;
- sstpivot(&splitseg, &starttet);
- splittetedge(newpoint, &starttet, flipqueue);
- if (steinerleft > 0) steinerleft--;
-
- // Check the two new subsegments to see if they're encroached.
- checkseg4encroach(&splitseg, NULL, true);
- if (badsubfaces != (memorypool *) NULL) {
- // Check the subfaces link of s to see if they're encroached.
- spivot(splitseg, startsh);
- spinsh = startsh;
- do {
- findedge(&spinsh, sorg(splitseg), sdest(splitseg));
- // The next two lines are only for checking.
- sspivot(spinsh, checkseg);
- assert(checkseg.sh == splitseg.sh);
- checksh = spinsh;
- if (!shell2badface(checksh)) {
- checksub4encroach(&checksh, NULL, true);
- }
- // The above operation may change the edge.
- findedge(&spinsh, sorg(splitseg), sdest(splitseg));
- spivotself(spinsh);
- } while (spinsh.sh != startsh.sh);
- }
- senextself(splitseg);
- spivotself(splitseg);
- assert(splitseg.sh != (shellface *) NULL);
- splitseg.shver = 0;
- checkseg4encroach(&splitseg, NULL, true);
- if (badsubfaces != (memorypool *) NULL) {
- // Check the subfaces link of s to see if they're encroached.
- spivot(splitseg, startsh);
- spinsh = startsh;
- do {
- findedge(&spinsh, sorg(splitseg), sdest(splitseg));
- // The next two lines are only for checking.
- sspivot(spinsh, checkseg);
- assert(checkseg.sh == splitseg.sh);
- checksh = spinsh;
- if (!shell2badface(checksh)) {
- checksub4encroach(&checksh, NULL, true);
- }
- // The above operation may change the edge.
- findedge(&spinsh, sorg(splitseg), sdest(splitseg));
- spivotself(spinsh);
- } while (spinsh.sh != startsh.sh);
- }
-
- // Recover Delaunay property by flipping. All existing segments which
- // are encroached by the new point will be discovered during flips
- // and be queued in list.
- flip(flipqueue, NULL);
- // Queuing bad-quality tetrahedra if need.
- if (badtetrahedrons != (memorypool *) NULL) {
- doqualchecktetlist();
- }
- }
-
- // Remove this entry from list.
- badfacedealloc(badsubsegs, encloop);
- // Get the next encroached segments.
- encloop = badfacetraverse(badsubsegs);
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// repairencsubs() Repair all the encroached subfaces until no subface is //
-// encroached. //
-// //
-// At beginning, all encroached subfaces are stored in pool 'badsubfaces'. //
-// Each encroached subface is repaired by splitting it, i.e., inserting a //
-// point at its circumcenter. However, if this point encroaches upon one or //
-// more subsegments then we don not add it and instead split the subsegments.//
-// Newly inserted points may encroach upon other subfaces, these are also //
-// repaired. //
-// //
-// After splitting a subface, the Delaunay property of the mesh is recovered //
-// by flip operations. 'flipqueue' returns a list of updated faces and may //
-// be non-locally Delaunay. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::repairencsubs(REAL* rpsarray, int* idx2facetlist,
- list* cavtetlist, queue* flipqueue)
-{
- badface *encloop;
- triface starttet;
- face splitsub, neisplitsub;
- face checksh, checkseg;
- point newpoint, checkpt;
- point pa, pb;
- enum locateresult loc;
- REAL epspp, dist;
- bool enq, reject;
- bool splitit, bqual;
- int facetidx, quenumber;
- int epscount;
- int i;
-
- if (b->verbose > 1) {
- printf(" Splitting encroached subfaces.\n");
- }
-
- // Note that steinerleft == -1 if an unlimited number of Steiner points
- // is allowed. Loop until the list 'badsubfaces' is empty.
- while ((badsubfaces->items > 0) && (steinerleft != 0)) {
- // Look for a nonempty queue.
- encloop = (badface *) NULL;
- for (quenumber = 1; quenumber >= 0; quenumber--) {
- encloop = subquefront[quenumber];
- if (encloop != (badface *) NULL) {
- // Remove the badface from the queue.
- subquefront[quenumber] = encloop->nextface;
- // Maintain a pointer to the NULL pointer at the end of the queue.
- if (subquefront[quenumber] == (badface *) NULL) {
- subquetail[quenumber] = &subquefront[quenumber];
- }
- break;
- }
- }
- assert(encloop != (badface *) NULL);
- if (b->verbose > 2) {
- printf(" Dequeuing ensub (%d, %d, %d) [%d].\n",
- pointmark(encloop->forg), pointmark(encloop->fdest),
- pointmark(encloop->fapex), quenumber);
- }
-
- // Clear the pointer saved in encloop->ss.
- splitsub = encloop->ss;
- setshell2badface(splitsub, NULL);
- // The subface may be not the same one when it was determined to be
- // encroached. If its adjacent encroached subface was split, the
- // consequent flips may change it into another subface.
- enq = ((sorg(splitsub) == encloop->forg) &&
- (sdest(splitsub) == encloop->fdest) &&
- (sapex(splitsub) == encloop->fapex));
- if (enq) {
- // This subface is encroached or has bad quality.
- bqual = (quenumber == 1);
- facetidx = shellmark(splitsub);
- // Split it if it is bad quality or is not sharp.
- splitit = bqual || (idx2facetlist[facetidx - 1] != 1);
- if (!splitit) {
- // Split it if it's neighboring tets have too big volume.
- bqual = checksub4splitting(&splitsub);
- splitit = (bqual == true);
- }
- if (splitit) {
- // We can or force to split this subface.
- makepoint(&newpoint);
- // If it is a bad quality face, calculate its circumcenter.
- if (quenumber == 1) {
- circumsphere(encloop->forg, encloop->fdest, encloop->fapex, NULL,
- encloop->cent, NULL);
- }
- // Set the coordinates of newpoint.
- for (i = 0; i < 3; i++) newpoint[i] = encloop->cent[i];
- stpivot(splitsub, starttet);
- if (starttet.tet == dummytet) {
- sesymself(splitsub);
- stpivot(splitsub, starttet);
- }
- assert(starttet.tet != dummytet);
- // Locate the newpoint in facet (resulting in splitsub).
- loc = locatesub(newpoint, &splitsub, oppo(starttet));
- stpivot(splitsub, starttet);
- if (starttet.tet == dummytet) {
- sesymself(splitsub);
- stpivot(splitsub, starttet);
- }
- assert(starttet.tet != dummytet);
- // Look if the newpoint encroaches upon some segments.
- recenttet = starttet; // Used for the input of preciselocate().
- collectcavtets(newpoint, cavtetlist);
- assert(cavtetlist->len() > 0);
- reject = tallencsegs(newpoint, cavtetlist);
- // Clear the list for the next use.
- cavtetlist->clear();
- if (!reject) {
- // Remove the encroached subface by inserting the newpoint.
- if (loc != ONVERTEX) {
- // Adjust the location of newpoint wrt. starttet.
- epspp = b->epsilon;
- epscount = 0;
- while (epscount < 16) {
- loc = adjustlocate(newpoint, &starttet, ONFACE, epspp);
- if (loc == ONVERTEX) {
- checkpt = org(starttet);
- dist = distance(checkpt, newpoint);
- if ((dist / longest) > b->epsilon) {
- epspp *= 1e-2;
- epscount++;
- continue;
- }
- }
- break;
- }
- }
- pa = org(starttet);
- pb = dest(starttet);
- findedge(&splitsub, pa, pb);
- // Let splitsub be face abc. ab is the current edge.
- if (loc == ONFACE) {
- // Split the face abc into three faces abv, bcv, cav.
- splittetface(newpoint, &starttet, flipqueue);
- // Adjust splitsub be abv.
- findedge(&splitsub, pa, pb);
- assert(sapex(splitsub) == newpoint);
- // Check the three new subfaces to see if they're encroached.
- // splitsub may be queued (it exists before split).
- checksh = splitsub;
- if (!shell2badface(checksh)) {
- checksub4encroach(&checksh, NULL, true); // abv
- }
- senext(splitsub, checksh);
- spivotself(checksh);
- // It is a new created face and should not be infected.
- assert(checksh.sh != dummysh && !shell2badface(checksh));
- checksub4encroach(&checksh, NULL, true); // bcv
- senext2(splitsub, checksh);
- spivotself(checksh);
- // It is a new created face and should not be infected.
- assert(checksh.sh != dummysh && !shell2badface(checksh));
- checksub4encroach(&checksh, NULL, true); // cav
- } else if (loc == ONEDGE) {
- // Let the adjacent subface be bad. ab is the spliting edge.
- // Split two faces abc, bad into 4 faces avc, vbc, avd, vbd.
- sspivot(splitsub, checkseg);
- assert(checkseg.sh == dummysh);
- // Remember the neighbor subface abd (going to be split also).
- spivot(splitsub, neisplitsub);
- findedge(&neisplitsub, pa, pb);
- // Split two faces abc, abd into four faces avc, vbc, avd, vbd.
- splittetedge(newpoint, &starttet, flipqueue);
- // Adjust splitsub be avc, neisplitsub be avd.
- findedge(&splitsub, pa, newpoint);
- findedge(&neisplitsub, pa, newpoint);
- // Check the four new subfaces to see if they're encroached.
- // splitsub may be an infected one (it exists before split).
- checksh = splitsub;
- if (!shell2badface(checksh)) {
- checksub4encroach(&checksh, NULL, true); // avc
- }
- // Get vbc.
- senext(splitsub, checksh);
- spivotself(checksh);
- // vbc is newly created.
- assert(checksh.sh != dummysh && !shell2badface(checksh));
- checksub4encroach(&checksh, NULL, true); // vbc
- // neisplitsub may be an infected one (it exists before split).
- checksh = neisplitsub;
- if (!shell2badface(checksh)) {
- checksub4encroach(&checksh, NULL, true); // avd
- }
- // Get vbd.
- senext(neisplitsub, checksh);
- spivotself(checksh);
- // vbd is newly created.
- assert(checksh.sh != dummysh && !shell2badface(checksh));
- checksub4encroach(&checksh, NULL, true); // vbd
- } else {
- printf("Internal error in splitencsub(): Point %d locates %s.\n",
- pointmark(newpoint), loc == ONVERTEX ? "on vertex" : "outside");
- internalerror();
- }
- if (steinerleft > 0) steinerleft--;
- // Recover Delaunay property by flipping. All existing subfaces
- // which are encroached by the new point will be discovered
- // during flips and be queued in list.
- flip(flipqueue, NULL);
- // There should be no encroached segments.
- // assert(badsubsegs->items == 0);
- // Queuing bad-quality tetrahedra if need.
- if (badtetrahedrons != (memorypool *) NULL) {
- doqualchecktetlist();
- }
- } else {
- // newpoint encroaches upon some segments. Rejected.
- /*
- if (bqual) {
- // Re-queue this face to process it later.
- badface *splitsub = encloop->ss;
- encsub = (badface *) badsubfaces->alloc();
- encsub->ss = splitsub;
- encsub->forg = sorg(splitsub);
- encsub->fdest = sdest(splitsub);
- encsub->fapex = sapex(splitsub);
- encsub->foppo = encloop->foppo;
- for (i = 0; i < 3; i++) encsub->cent[i] = newpoint[i];
- encsub->nextface = (badface *) NULL;
- setshell2badface(encsub->ss, encsub);
- // Add the subface to the end of a queue.
- *subquetail[quenumber] = encsub;
- // Maintain a pointer to the NULL pointer at the end of the queue.
- subquetail[quenumber] = &encsub->nextface;
- if (b->verbose > 2) {
- printf(" Requeuing subface (%d, %d, %d) [%d].\n",
- pointmark(encsub->forg), pointmark(encsub->fdest),
- pointmark(encsub->fapex), quenumber);
- }
- }
- */
- // Delete the newpoint.
- pointdealloc(newpoint);
- // Repair all the encroached segments.
- if (badsubsegs->items > 0) {
- repairencsegs(rpsarray, bqual, flipqueue);
- }
- }
- }
- } else {
- // enq = false! This subface has been changed, check it again.
- checksub4encroach(&splitsub, NULL, true);
- }
- // Remove this entry from list.
- badfacedealloc(badsubfaces, encloop);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// repairbadtets() Repair all bad-quality tetrahedra until no tetrahedron //
-// is considered as bad-quality. //
-// //
-// At beginning, all bad-quality tetrahedra are stored in 'badtetrahedrons'. //
-// Each bad tetrahedron is repaired by splitting it, i.e., inserting a point //
-// at its circumcenter. However, if this point encroaches any subsegment or //
-// subface, we do not add it and instead split the subsegment or subface. //
-// Newly inserted points may create other bad-quality tetrahedra, these are //
-// also repaired. //
-// //
-// After splitting a subface, the Delaunay property of the mesh is recovered //
-// by flip operations. 'flipqueue' returns a list of updated faces and may //
-// be non-locally Delaunay. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::repairbadtets(REAL* rpsarray, int* idx2facetlist,
- list* cavtetlist, queue* flipqueue)
-{
- badtetrahedron *badtet;
- triface starttet;
- point newpoint;
- point torg, tdest, tapex, toppo;
- enum insertsiteresult success;
- bool reject;
- int i;
-
- // Loop until pool 'badtetrahedrons' is empty. Note that steinerleft == -1
- // if an unlimited number of Steiner points is allowed.
- while ((badtetrahedrons->items > 0) && (steinerleft != 0)) {
- badtet = dequeuebadtet();
- assert (badtet != (badtetrahedron *) NULL);
- // Make sure that this tetrahedron is still the same tetrahedron it was
- // when it was tested and determined to be of bad quality. Subsequent
- // transformations may have made it a different tetrahedron.
- if (!isdead(&badtet->tet) && org(badtet->tet) == badtet->tetorg &&
- dest(badtet->tet) == badtet->tetdest &&
- apex(badtet->tet) == badtet->tetapex &&
- oppo(badtet->tet) == badtet->tetoppo) {
- // Create a newpoint at the circumcenter of this tetrahedron.
- makepoint(&newpoint);
- for (i = 0; i < 3; i++) newpoint[i] = badtet->cent[i];
- for (i = 0; i < in->numberofpointattributes; i++) newpoint[3 + i] = 0.0;
- // Set it's type be FREEVOLVERTEX.
- setpointtype(newpoint, FREEVOLVERTEX);
-
- // Look if the newpoint encroaches upon some segments, subfaces.
- recenttet = badtet->tet; // Used for the input of preciselocate().
- collectcavtets(newpoint, cavtetlist);
- assert(cavtetlist->len() > 0);
- reject = tallencsegs(newpoint, cavtetlist);
- if (!reject) {
- reject = tallencsubs(newpoint, cavtetlist);
- }
- // Clear the list for the next use.
- cavtetlist->clear();
-
- if (!reject) {
- // Insert the point, it should be always success.
- starttet = badtet->tet;
- success = insertsite(newpoint, &starttet, true, flipqueue);
- if (success != DUPLICATEPOINT) {
- if (steinerleft > 0) steinerleft--;
- // Recover Delaunay property by flipping.
- flip(flipqueue, NULL);
- // Queuing bad-quality tetrahedra if need.
- doqualchecktetlist();
- } else {
- // !!! It's a bug!!!
- pointdealloc(newpoint);
- }
- } else {
- // newpoint encroaches upon some segments or subfaces. Rejected.
- pointdealloc(newpoint);
- if (badsubsegs->items > 0) {
- // Repair all the encroached segments.
- repairencsegs(rpsarray, false, flipqueue);
- }
- if (badsubfaces->items > 0) {
- // Repair all the encroached subfaces.
- repairencsubs(rpsarray, idx2facetlist, cavtetlist, flipqueue);
- }
- }
- }
- // Remove the bad-quality tetrahedron from the pool.
- badtetrahedrons->dealloc((void *) badtet);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// enforcequality() Remove all the encroached subsegments, subfaces and //
-// bad tetrahedra from the tetrahedral mesh. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::enforcequality()
-{
- queue *flipqueue;
- list *cavtetlist;
- REAL *rpsarray;
- int *idx2facetlist;
- int i;
-
- if (!b->quiet) {
- printf("Adding Steiner points to enforce quality.\n");
- }
-
- // Initialize working queues, lists.
- flipqueue = new queue(sizeof(badface));
- cavtetlist = new list(sizeof(triface), NULL, 256);
- rpsarray = new REAL[points->items];
-
- // Mark segment vertices (acute or not) for determining segment types.
- markacutevertices(89.0);
- // Mark facets have sharp corners (for termination).
- marksharpfacets(idx2facetlist, 89.0);
- // Calculate the protecting spheres for all acute points.
- initializerpsarray(rpsarray);
-
- // Initialize the pool of encroached subsegments.
- badsubsegs = new memorypool(sizeof(badface), SUBPERBLOCK, POINTER, 0);
- // Test all segments to see if they're encroached.
- tallencsegs(NULL, NULL);
- if (b->verbose && badsubsegs->items > 0) {
- printf(" Splitting encroached subsegments.\n");
- }
- // Fix encroached subsegments without noting any encr. subfaces.
- repairencsegs(rpsarray, true, flipqueue);
-
- // Initialize the pool of encroached subfaces.
- badsubfaces = new memorypool(sizeof(badface), SUBPERBLOCK, POINTER, 0);
- // Initialize the queues of badfaces.
- for (i = 0; i < 2; i++) subquefront[i] = (badface *) NULL;
- for (i = 0; i < 2; i++) subquetail[i] = &subquefront[i];
- // Test all subfaces to see if they're encroached.
- tallencsubs(NULL, NULL);
- if (b->verbose && badsubfaces->items > 0) {
- printf(" Splitting encroached subfaces.\n");
- }
- // Fix encroached subfaces without noting bad tetrahedra.
- repairencsubs(rpsarray, idx2facetlist, cavtetlist, flipqueue);
- // At this point, the mesh should be (conforming) Delaunay.
-
- // Next, fix bad quality tetrahedra.
- if ((b->minratio > 0.0) || b->varvolume || b->fixedvolume) {
- // Initialize the pool of bad tetrahedra.
- badtetrahedrons = new memorypool(sizeof(badtetrahedron), ELEPERBLOCK,
- POINTER, 0);
- // Initialize the list of bad tetrahedra.
- qualchecktetlist = new list(sizeof(triface), NULL);
- // Initialize the queues of bad tetrahedra.
- for (i = 0; i < 64; i++) tetquefront[i] = (badtetrahedron *) NULL;
- for (i = 0; i < 64; i++) tetquetail[i] = &tetquefront[i];
- // Test all tetrahedra to see if they're bad.
- tallbadtetrahedrons();
- if (b->verbose && badtetrahedrons->items > 0) {
- printf(" Splitting bad tetrahedra.\n");
- }
- repairbadtets(rpsarray, idx2facetlist, cavtetlist, flipqueue);
- // At this point, it should no bad quality tetrahedra.
- delete qualchecktetlist;
- delete badtetrahedrons;
- }
-
- delete badsubfaces;
- delete badsubsegs;
- delete cavtetlist;
- delete flipqueue;
- delete [] idx2facetlist;
- delete [] rpsarray;
-}
-
-//
-// End of Delaunay refinement routines
-//
-
-//
-// Begin of I/O rouitnes
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// transfernodes() Transfer nodes from 'io->pointlist' to 'this->points'. //
-// //
-// Initializing 'this->points'. Transferring all points from 'in->pointlist'//
-// into it. All points are indexed (start from in->firstnumber). Each point //
-// is initialized be UNUSEDVERTEX. The bounding box (xmin, xmax, ymin, ymax,//
-// zmin, zmax) and the diameter (longest) of the point set are calculated. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::transfernodes()
-{
- point pointloop;
- REAL x, y, z;
- int coordindex;
- int attribindex;
- int i, j;
-
- // Read the points.
- coordindex = 0;
- attribindex = 0;
- for (i = 0; i < in->numberofpoints; i++) {
- makepoint(&pointloop);
- // Read the point coordinates.
- x = pointloop[0] = in->pointlist[coordindex++];
- y = pointloop[1] = in->pointlist[coordindex++];
- z = pointloop[2] = in->pointlist[coordindex++];
- // Read the point attributes.
- for (j = 0; j < in->numberofpointattributes; j++) {
- pointloop[3 + j] = in->pointattributelist[attribindex++];
- }
- // Determine the smallest and largests x, y and z coordinates.
- if (i == 0) {
- xmin = xmax = x;
- ymin = ymax = y;
- zmin = zmax = z;
- } else {
- xmin = (x < xmin) ? x : xmin;
- xmax = (x > xmax) ? x : xmax;
- ymin = (y < ymin) ? y : ymin;
- ymax = (y > ymax) ? y : ymax;
- zmin = (z < zmin) ? z : zmin;
- zmax = (z > zmax) ? z : zmax;
- }
- }
- // 'longest' is the largest possible edge length formed by input vertices.
- // It is used as the measure to distinguish two identical points.
- x = xmax - xmin;
- y = ymax - ymin;
- z = zmax - zmin;
- longest = sqrt(x * x + y * y + z * z);
- if (longest == 0.0) {
- printf("Error: The point set is trivial.\n");
- exit(1);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// jettisonnodes() Jettison unused or duplicated vertices. //
-// //
-// Unused points are those input points which are outside the mesh domain or //
-// have no connection (isolated) to the mesh. Duplicated points exist for //
-// example if the input PLC is read from a .stl mesh file (marked during the //
-// Delaunay tetrahedralization step. This routine remove these points from //
-// points list. All existing points are reindexed. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::jettisonnodes()
-{
- point pointloop;
- bool jetflag;
- int idx;
-
- if (!b->quiet) {
- printf("Jettisoning redundants points.\n");
- }
-
- points->traversalinit();
- pointloop = pointtraverse();
- idx = in->firstnumber;
- while (pointloop != (point) NULL) {
- jetflag = (pointtype(pointloop) == DUPLICATEDVERTEX) ||
- (pointtype(pointloop) == UNUSEDVERTEX);
- if (jetflag) {
- // It is a duplicated point, delete it.
- pointdealloc(pointloop);
- } else {
- // Index it.
- setpointmark(pointloop, idx);
- idx++;
- }
- pointloop = pointtraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// highorder() Create extra nodes for quadratic subparametric elements. //
-// //
-// 'highordertable' is an array (size = numberoftetrahedra * 6) for storing //
-// high-order nodes of each tetrahedron. This routine is used only when -o2 //
-// switch is used. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::highorder()
-{
- triface tetloop, worktet;
- triface spintet, adjtet;
- point torg, tdest, tapex;
- point *extralist, *adjextralist;
- point newpoint;
- int hitbdry, ptmark;
- int i, j;
-
- // The 'edgeindex' (from 0 to 5) is list as follows:
- // 0 - (v0, v1), 1 - (v1, v2), 2 - (v2, v0)
- // 3 - (v3, v0), 4 - (v3, v1), 5 - (v3, v2)
- // Define an edgeindex map: (loc, ver)->edgeindex.
- int edgeindexmap[4][6] = {0, 0, 1, 1, 2, 2,
- 3, 3, 4, 4, 0, 0,
- 4, 4, 5, 5, 1, 1,
- 5, 5, 3, 3, 2, 2};
-
- if (!b->quiet) {
- printf("Adding vertices for second-order tetrahedra.\n");
- }
-
- // Initialize the 'highordertable'.
- highordertable = new point[tetrahedrons->items * 6];
- if (highordertable == (point *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
-
- // The following line ensures that dead items in the pool of nodes cannot
- // be allocated for the extra nodes associated with high order elements.
- // This ensures that the primary nodes (at the corners of elements) will
- // occur earlier in the output files, and have lower indices, than the
- // extra nodes.
- points->deaditemstack = (void *) NULL;
-
- // Assign an entry for each tetrahedron to find its extra nodes. At the
- // mean while, initialize all extra nodes be NULL.
- i = 0;
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- tetloop.tet[highorderindex] = (tetrahedron) &highordertable[i];
- for (j = 0; j < 6; j++) {
- highordertable[i + j] = (point) NULL;
- }
- i += 6;
- tetloop.tet = tetrahedrontraverse();
- }
-
- // To create a unique node on each edge. Loop over all tetrahedra, and
- // look at the six edges of each tetrahedron. If the extra node in
- // the tetrahedron corresponding to this edge is NULL, create a node
- // for this edge, at the same time, set the new node into the extra
- // node lists of all other tetrahedra sharing this edge.
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- // Get the list of extra nodes.
- extralist = (point *) tetloop.tet[highorderindex];
- for (i = 0; i < 6; i++) {
- if (extralist[i] == (point) NULL) {
- // Operate on this edge.
- worktet = tetloop;
- worktet.loc = 0; worktet.ver = 0;
- // Get the correct edge in 'worktet'.
- switch(i) {
- case 0: // (v0, v1)
- break;
- case 1: // (v1, v2)
- enextself(worktet);
- break;
- case 2: // (v2, v0)
- enext2self(worktet);
- break;
- case 3: // (v3, v0)
- fnextself(worktet);
- enext2self(worktet);
- break;
- case 4: // (v3, v1)
- enextself(worktet);
- fnextself(worktet);
- enext2self(worktet);
- break;
- case 5: // (v3, v2)
- enext2self(worktet);
- fnextself(worktet);
- enext2self(worktet);
- }
- // Create a new node on this edge.
- torg = org(worktet);
- tdest = dest(worktet);
- // Create a new node in the middle of the edge.
- newpoint = (point) points->alloc();
- // Interpolate its attributes.
- for (j = 0; j < 3 + in->numberofpointattributes; j++) {
- newpoint[j] = 0.5 * (torg[j] + tdest[j]);
- }
- ptmark = (int) points->items - (in->firstnumber == 1 ? 0 : 1);
- setpointmark(newpoint, ptmark);
- // Add this node to its extra node list.
- extralist[i] = newpoint;
- // Set 'newpoint' into extra node lists of other tetrahedra
- // sharing this edge.
- tapex = apex(worktet);
- spintet = worktet;
- hitbdry = 0;
- while (hitbdry < 2) {
- if (fnextself(spintet)) {
- // Get the extra node list of 'spintet'.
- adjextralist = (point *) spintet.tet[highorderindex];
- // Find the index of its extra node list.
- j = edgeindexmap[spintet.loc][spintet.ver];
- // Only set 'newpoint' into 'adjextralist' if it is a NULL.
- // Because two faces can belong to the same tetrahedron.
- if (adjextralist[j] == (point) NULL) {
- adjextralist[j] = newpoint;
- }
- if (apex(spintet) == tapex) {
- break;
- }
- } else {
- hitbdry++;
- if (hitbdry < 2) {
- esym(worktet, spintet);
- }
- }
- }
- }
- }
- tetloop.tet = tetrahedrontraverse();
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outnodes() Output the points to a .node file or a tetgenio structure. //
-// //
-// Note: each point has already been numbered on input (the first index is //
-// 'in->firstnumber'). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outnodes(tetgenio* out)
-{
- FILE *outfile;
- char outnodefilename[FILENAMESIZE];
- point pointloop;
- int nextras, bmark, marker;
- int coordindex, attribindex;
- int pointnumber, index, i;
-
- if (out == (tetgenio *) NULL) {
- strcpy(outnodefilename, b->outfilename);
- strcat(outnodefilename, ".node");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", outnodefilename);
- } else {
- printf("Writing nodes.\n");
- }
- }
-
- nextras = in->numberofpointattributes;
- bmark = !b->nobound && in->pointmarkerlist;
-
- if (out == (tetgenio *) NULL) {
- outfile = fopen(outnodefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", outnodefilename);
- exit(1);
- }
- // Number of points, number of dimensions, number of point attributes,
- // and number of boundary markers (zero or one).
- fprintf(outfile, "%ld %d %d %d\n", points->items, 3, nextras, bmark);
- } else {
- // Allocate space for 'pointlist';
- out->pointlist = new REAL[points->items * 3];
- if (out->pointlist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- // Allocate space for 'pointattributelist' if necessary;
- if (nextras > 0) {
- out->pointattributelist = new REAL[points->items * nextras];
- if (out->pointattributelist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- // Allocate space for 'pointmarkerlist' if necessary;
- if (bmark) {
- out->pointmarkerlist = new int[points->items];
- if (out->pointmarkerlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- out->numberofpoints = points->items;
- out->numberofpointattributes = nextras;
- coordindex = 0;
- attribindex = 0;
- }
-
- points->traversalinit();
- pointloop = pointtraverse();
- pointnumber = in->firstnumber;
- index = 0;
- while (pointloop != (point) NULL) {
- if (bmark) {
- // Determine the boundary marker.
- if (index < in->numberofpoints) {
- // Input point's marker is directly copied to output.
- marker = in->pointmarkerlist[index];
- if (marker == 0) {
- // Change the marker if it is a boundary point.
- marker = ((pointtype(pointloop) != UNUSEDVERTEX) &&
- (pointtype(pointloop) != FREEVOLVERTEX) &&
- (pointtype(pointloop) != DUPLICATEDVERTEX))
- ? 1 : 0;
- }
- } else if ((pointtype(pointloop) != UNUSEDVERTEX) &&
- (pointtype(pointloop) != FREEVOLVERTEX) &&
- (pointtype(pointloop) != DUPLICATEDVERTEX)) {
- // A boundary vertex has marker 1.
- marker = 1;
- } else {
- // Free or internal point has a zero marker.
- marker = 0;
- }
- }
- if (out == (tetgenio *) NULL) {
- // Point number, x, y and z coordinates.
- fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
- pointloop[0], pointloop[1], pointloop[2]);
- for (i = 0; i < nextras; i++) {
- // Write an attribute.
- fprintf(outfile, " %.17g", pointloop[3 + i]);
- }
- if (bmark) {
- // Write the boundary marker.
- fprintf(outfile, " %d", marker);
- }
- fprintf(outfile, "\n");
- } else {
- // X, y, and z coordinates.
- out->pointlist[coordindex++] = pointloop[0];
- out->pointlist[coordindex++] = pointloop[1];
- out->pointlist[coordindex++] = pointloop[2];
- // Point attributes.
- for (i = 0; i < nextras; i++) {
- // Output an attribute.
- out->pointattributelist[attribindex++] = pointloop[3 + i];
- }
- if (bmark) {
- // Output the boundary marker.
- out->pointmarkerlist[index] = marker;
- }
- }
- pointloop = pointtraverse();
- pointnumber++;
- index++;
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outelements() Output the tetrahedra to an .ele file or a tetgenio //
-// structure. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outelements(tetgenio* out)
-{
- FILE *outfile;
- char outelefilename[FILENAMESIZE];
- tetrahedron* tptr;
- int *tlist;
- REAL *talist;
- int pointindex;
- int attribindex;
- point p1, p2, p3, p4;
- point *extralist;
- int elementnumber;
- int eextras;
- int i;
-
- if (out == (tetgenio *) NULL) {
- strcpy(outelefilename, b->outfilename);
- strcat(outelefilename, ".ele");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", outelefilename);
- } else {
- printf("Writing elements.\n");
- }
- }
-
- eextras = in->numberoftetrahedronattributes;
- if (out == (tetgenio *) NULL) {
- outfile = fopen(outelefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", outelefilename);
- exit(1);
- }
- // Number of tetras, points per tetra, attributes per tetra.
- fprintf(outfile, "%ld %d %d\n", tetrahedrons->items,
- b->order == 1 ? 4 : 10, eextras);
- } else {
- // Allocate memory for output tetrahedra.
- out->tetrahedronlist = new int[tetrahedrons->items *
- (b->order == 1 ? 4 : 10)];
- if (out->tetrahedronlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- // Allocate memory for output tetrahedron attributes if necessary.
- if (eextras > 0) {
- out->tetrahedronattributelist = new REAL[tetrahedrons->items * eextras];
- if (out->tetrahedronattributelist == (REAL *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- out->numberoftetrahedra = tetrahedrons->items;
- out->numberofcorners = b->order == 1 ? 4 : 10;
- out->numberoftetrahedronattributes = eextras;
- tlist = out->tetrahedronlist;
- talist = out->tetrahedronattributelist;
- pointindex = 0;
- attribindex = 0;
- }
-
- tetrahedrons->traversalinit();
- tptr = tetrahedrontraverse();
- elementnumber = in->firstnumber;
- while (tptr != (tetrahedron *) NULL) {
- p1 = (point) tptr[4];
- p2 = (point) tptr[5];
- p3 = (point) tptr[6];
- p4 = (point) tptr[7];
- if (out == (tetgenio *) NULL) {
- // Tetrahedron number, indices for four points.
- fprintf(outfile, "%5d %5d %5d %5d %5d", elementnumber,
- pointmark(p1), pointmark(p2), pointmark(p3), pointmark(p4));
- if (b->order == 2) {
- extralist = (point *) tptr[highorderindex];
- // Tetrahedron number, indices for four points plus six extra points.
- fprintf(outfile, " %5d %5d %5d %5d %5d %5d",
- pointmark(extralist[0]), pointmark(extralist[1]),
- pointmark(extralist[2]), pointmark(extralist[3]),
- pointmark(extralist[4]), pointmark(extralist[5]));
- }
- for (i = 0; i < eextras; i++) {
- fprintf(outfile, " %.17g", elemattribute(tptr, i));
- }
- fprintf(outfile, "\n");
- } else {
- tlist[pointindex++] = pointmark(p1);
- tlist[pointindex++] = pointmark(p2);
- tlist[pointindex++] = pointmark(p3);
- tlist[pointindex++] = pointmark(p4);
- if (b->order == 2) {
- extralist = (point *) tptr[highorderindex];
- tlist[pointindex++] = pointmark(extralist[0]);
- tlist[pointindex++] = pointmark(extralist[1]);
- tlist[pointindex++] = pointmark(extralist[2]);
- tlist[pointindex++] = pointmark(extralist[3]);
- tlist[pointindex++] = pointmark(extralist[4]);
- tlist[pointindex++] = pointmark(extralist[5]);
- }
- for (i = 0; i < eextras; i++) {
- talist[attribindex++] = elemattribute(tptr, i);
- }
- }
- tptr = tetrahedrontraverse();
- elementnumber++;
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outfaces() Output all faces to a .face file or a tetgenio structure. //
-// //
-// This routines outputs all triangular faces (including outer boundary //
-// faces and inner faces) of this mesh. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outfaces(tetgenio* out)
-{
- FILE *outfile;
- char facefilename[FILENAMESIZE];
- int *elist;
- int *emlist;
- int index;
- triface tface, tsymface;
- face checkmark;
- point torg, tdest, tapex;
- long faces;
- int bmark, faceid, marker;
- int facenumber;
-
- if (out == (tetgenio *) NULL) {
- strcpy(facefilename, b->outfilename);
- strcat(facefilename, ".face");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", facefilename);
- } else {
- printf("Writing faces.\n");
- }
- }
-
- faces = (4l * tetrahedrons->items + hullsize) / 2l;
- bmark = !b->nobound && in->facetmarkerlist;
-
- if (out == (tetgenio *) NULL) {
- outfile = fopen(facefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", facefilename);
- exit(1);
- }
- fprintf(outfile, "%ld %d\n", faces, bmark);
- } else {
- // Allocate memory for 'trifacelist'.
- out->trifacelist = new int[faces * 3];
- if (out->trifacelist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- // Allocate memory for 'trifacemarkerlist' if necessary.
- if (bmark) {
- out->trifacemarkerlist = new int[faces];
- if (out->trifacemarkerlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- out->numberoftrifaces = faces;
- elist = out->trifacelist;
- emlist = out->trifacemarkerlist;
- index = 0;
- }
-
- tetrahedrons->traversalinit();
- tface.tet = tetrahedrontraverse();
- facenumber = in->firstnumber;
- // To loop over the set of faces, loop over all tetrahedra, and look at
- // the four faces of each one. If there isn't another tetrahedron
- // adjacent to this face, operate on the face. If there is another
- // adjacent tetrahedron, operate on the face only if the current
- // tetrahedron has a smaller pointer than its neighbor. This way, each
- // face is considered only once.
- while (tface.tet != (tetrahedron *) NULL) {
- for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
- sym(tface, tsymface);
- if ((tsymface.tet == dummytet) || (tface.tet < tsymface.tet)) {
- torg = org(tface);
- tdest = dest(tface);
- tapex = apex(tface);
- if (bmark) {
- // Get the boundary marker of this face. If it is an inner face,
- // it has no boundary marker, set it be zero.
- if (b->useshelles) {
- // Shell face is used.
- tspivot(tface, checkmark);
- if (checkmark.sh == dummysh) {
- marker = 0; // It is an inner face.
- } else {
- faceid = shellmark(checkmark) - 1;
- marker = in->facetmarkerlist[faceid];
- }
- } else {
- // Shell face is not used, only distinguish outer and inner face.
- marker = tsymface.tet != dummytet ? 1 : 0;
- }
- }
- if (out == (tetgenio *) NULL) {
- // Face number, indices of three vertices.
- fprintf(outfile, "%5d %4d %4d %4d", facenumber,
- pointmark(torg), pointmark(tdest), pointmark(tapex));
- if (bmark) {
- // Output a boundary marker.
- fprintf(outfile, " %d", marker);
- }
- fprintf(outfile, "\n");
- } else {
- // Output indices of three vertices.
- elist[index++] = pointmark(torg);
- elist[index++] = pointmark(tdest);
- elist[index++] = pointmark(tapex);
- if (bmark) {
- emlist[facenumber - in->firstnumber] = marker;
- }
- }
- facenumber++;
- }
- }
- tface.tet = tetrahedrontraverse();
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outhullfaces() Output outer boundary faces to a .face file or a //
-// tetgenio structure. //
-// //
-// The normal of each face is arranged to point inside of the domain (use //
-// right-hand rule). This routines will outputs convex hull faces if the //
-// mesh is a Delaunay tetrahedralization. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outhullfaces(tetgenio* out)
-{
- FILE *outfile;
- char facefilename[FILENAMESIZE];
- int *elist;
- int index;
- triface tface, tsymface;
- face checkmark;
- point torg, tdest, tapex;
- int facenumber;
-
- if (out == (tetgenio *) NULL) {
- strcpy(facefilename, b->outfilename);
- strcat(facefilename, ".face");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", facefilename);
- } else {
- printf("Writing faces.\n");
- }
- }
-
- if (out == (tetgenio *) NULL) {
- outfile = fopen(facefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", facefilename);
- exit(1);
- }
- fprintf(outfile, "%ld 0\n", hullsize);
- } else {
- // Allocate memory for 'trifacelist'.
- out->trifacelist = new int[hullsize * 3];
- if (out->trifacelist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- out->numberoftrifaces = hullsize;
- elist = out->trifacelist;
- index = 0;
- }
-
- tetrahedrons->traversalinit();
- tface.tet = tetrahedrontraverse();
- facenumber = in->firstnumber;
- // To loop over the set of hull faces, loop over all tetrahedra, and look
- // at the four faces of each one. If there isn't another tetrahedron
- // adjacent to this face, operate on the face.
- while (tface.tet != (tetrahedron *) NULL) {
- for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
- sym(tface, tsymface);
- if (tsymface.tet == dummytet) {
- torg = org(tface);
- tdest = dest(tface);
- tapex = apex(tface);
- if (out == (tetgenio *) NULL) {
- // Face number, indices of three vertices.
- fprintf(outfile, "%5d %4d %4d %4d", facenumber,
- pointmark(torg), pointmark(tdest), pointmark(tapex));
- fprintf(outfile, "\n");
- } else {
- // Output indices of three vertices.
- elist[index++] = pointmark(torg);
- elist[index++] = pointmark(tdest);
- elist[index++] = pointmark(tapex);
- }
- facenumber++;
- }
- }
- tface.tet = tetrahedrontraverse();
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outsubfaces() Output subfaces (i.e. boundary faces) to a .face file or //
-// a tetgenio structure. //
-// //
-// The boundary faces are exist in 'subfaces'. For listing triangle vertices //
-// in the same sense for all triangles in the mesh, the direction determined //
-// by right-hand rule is pointer to the inside of the volume. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outsubfaces(tetgenio* out)
-{
- FILE *outfile;
- char facefilename[FILENAMESIZE];
- int *elist;
- int *emlist;
- int index;
- triface abuttingtet;
- face faceloop;
- point torg, tdest, tapex;
- int bmark, faceid, marker;
- int facenumber;
-
- if (out == (tetgenio *) NULL) {
- strcpy(facefilename, b->outfilename);
- strcat(facefilename, ".face");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", facefilename);
- } else {
- printf("Writing faces.\n");
- }
- }
-
- bmark = !b->nobound && in->facetmarkerlist;
-
- if (out == (tetgenio *) NULL) {
- outfile = fopen(facefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", facefilename);
- exit(1);
- }
- // Number of subfaces.
- fprintf(outfile, "%ld %d\n", subfaces->items, bmark);
- } else {
- // Allocate memory for 'trifacelist'.
- out->trifacelist = new int[subfaces->items * 3];
- if (out->trifacelist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- // Allocate memory for 'trifacemarkerlist', if necessary.
- if (bmark) {
- out->trifacemarkerlist = new int[subfaces->items];
- if (out->trifacemarkerlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- }
- out->numberoftrifaces = subfaces->items;
- elist = out->trifacelist;
- emlist = out->trifacemarkerlist;
- index = 0;
- }
-
- subfaces->traversalinit();
- faceloop.sh = shellfacetraverse(subfaces);
- facenumber = in->firstnumber;
- while (faceloop.sh != (shellface *) NULL) {
- stpivot(faceloop, abuttingtet);
- if (abuttingtet.tet == dummytet) {
- sesymself(faceloop);
- stpivot(faceloop, abuttingtet);
- // assert(abuttingtet.tet != dummytet) {
- }
- if (abuttingtet.tet != dummytet) {
- // If there is a tetrahedron containing this subface, orient it so
- // that the normal of this face points to inside of the volume by
- // right-hand rule.
- adjustedgering(abuttingtet, CCW);
- torg = org(abuttingtet);
- tdest = dest(abuttingtet);
- tapex = apex(abuttingtet);
- } else {
- // This may happen when only a surface mesh be generated.
- torg = sorg(faceloop);
- tdest = sdest(faceloop);
- tapex = sapex(faceloop);
- }
- if (bmark) {
- faceid = shellmark(faceloop) - 1;
- marker = in->facetmarkerlist[faceid];
- }
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "%5d %4d %4d %4d", facenumber,
- pointmark(torg), pointmark(tdest), pointmark(tapex));
- if (bmark) {
- fprintf(outfile, " %d", marker);
- }
- fprintf(outfile, "\n");
- } else {
- // Output three vertices of this face;
- elist[index++] = pointmark(torg);
- elist[index++] = pointmark(tdest);
- elist[index++] = pointmark(tapex);
- if (bmark) {
- emlist[facenumber - in->firstnumber] = marker;
- }
- }
- facenumber++;
- faceloop.sh = shellfacetraverse(subfaces);
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outsubsegments() Output segments (i.e. boundary edges) to a .edge file //
-// or a tetgenio structure. //
-// //
-// The boundary edges are stored in 'subsegs'. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outsubsegments(tetgenio* out)
-{
- FILE *outfile;
- char edgefilename[FILENAMESIZE];
- int *elist;
- int index;
- face edgeloop;
- point torg, tdest;
- int edgenumber;
-
- if (out == (tetgenio *) NULL) {
- strcpy(edgefilename, b->outfilename);
- strcat(edgefilename, ".edge");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", edgefilename);
- } else {
- printf("Writing faces.\n");
- }
- }
-
- if (out == (tetgenio *) NULL) {
- outfile = fopen(edgefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", edgefilename);
- exit(1);
- }
- // Number of subsegments.
- fprintf(outfile, "%ld\n", subsegs->items);
- } else {
- // Allocate memory for 'edgelist'.
- out->edgelist = new int[subsegs->items * 2];
- if (out->edgelist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- out->numberofedges = subsegs->items;
- elist = out->edgelist;
- index = 0;
- }
-
- subsegs->traversalinit();
- edgeloop.sh = shellfacetraverse(subsegs);
- edgenumber = in->firstnumber;
- while (edgeloop.sh != (shellface *) NULL) {
- torg = sorg(edgeloop);
- tdest = sdest(edgeloop);
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "%5d %4d %4d\n", edgenumber, pointmark(torg),
- pointmark(tdest));
- } else {
- // Output three vertices of this face;
- elist[index++] = pointmark(torg);
- elist[index++] = pointmark(tdest);
- }
- edgenumber++;
- edgeloop.sh = shellfacetraverse(subsegs);
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outneighbors() Output a list of neighbors to a .neigh file or a //
-// tetgenio structure. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outneighbors(tetgenio* out)
-{
- FILE *outfile;
- char neighborfilename[FILENAMESIZE];
- int *nlist;
- int index;
- tetrahedron *tptr;
- triface tetloop, tetsym;
- int neighbor1, neighbor2, neighbor3, neighbor4;
- int elementnumber;
-
- if (out == (tetgenio *) NULL) {
- strcpy(neighborfilename, b->outfilename);
- strcat(neighborfilename, ".neigh");
- }
-
- if (!b->quiet) {
- if (out == (tetgenio *) NULL) {
- printf("Writing %s.\n", neighborfilename);
- } else {
- printf("Writing neighbors.\n");
- }
- }
-
- if (out == (tetgenio *) NULL) {
- outfile = fopen(neighborfilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", neighborfilename);
- exit(1);
- }
- // Number of tetrahedra, four faces per tetrahedron.
- fprintf(outfile, "%ld %d\n", tetrahedrons->items, 4);
- } else {
- // Allocate memory for 'neighborlist'.
- out->neighborlist = new int[tetrahedrons->items * 4];
- if (out->neighborlist == (int *) NULL) {
- printf("Error: Out of memory.\n");
- exit(1);
- }
- nlist = out->neighborlist;
- index = 0;
- }
-
- tetrahedrons->traversalinit();
- tptr = tetrahedrontraverse();
- elementnumber = in->firstnumber;
- while (tptr != (tetrahedron *) NULL) {
- * (int *) (tptr + 8) = elementnumber;
- tptr = tetrahedrontraverse();
- elementnumber++;
- }
- * (int *) (dummytet + 8) = -1;
-
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- elementnumber = in->firstnumber;
- while (tetloop.tet != (tetrahedron *) NULL) {
- tetloop.loc = 2;
- sym(tetloop, tetsym);
- neighbor1 = * (int *) (tetsym.tet + 8);
- tetloop.loc = 3;
- sym(tetloop, tetsym);
- neighbor2 = * (int *) (tetsym.tet + 8);
- tetloop.loc = 1;
- sym(tetloop, tetsym);
- neighbor3 = * (int *) (tetsym.tet + 8);
- tetloop.loc = 0;
- sym(tetloop, tetsym);
- neighbor4 = * (int *) (tetsym.tet + 8);
- if (out == (tetgenio *) NULL) {
- // Tetrahedra number, neighboring tetrahedron numbers.
- fprintf(outfile, "%4d %4d %4d %4d %4d\n", elementnumber,
- neighbor1, neighbor2, neighbor3, neighbor4);
- } else {
- nlist[index++] = neighbor1;
- nlist[index++] = neighbor2;
- nlist[index++] = neighbor3;
- nlist[index++] = neighbor4;
- }
- tetloop.tet = tetrahedrontraverse();
- elementnumber++;
- }
-
- if (out == (tetgenio *) NULL) {
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outsmesh() Write surface mesh to a .smesh file, which can be read and //
-// tetrahedralized by TetGen. //
-// //
-// You can specify a filename (without suffix) in 'smfilename'. If you don't //
-// supply a filename (let smfilename be NULL), the default name stored in //
-// 'tetgenbehavior' will be used. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outsmesh(char* smfilename)
-{
- FILE *outfile;
- char smefilename[FILENAMESIZE];
- face faceloop;
- point pointloop;
- point p1, p2, p3;
- int pointnumber;
- int nextras, bmark;
- int faceid, marker;
-
- if (smfilename != (char *) NULL && smfilename[0] != '\0') {
- strcpy(smefilename, smfilename);
- } else if (b->outfilename[0] != '\0') {
- strcpy(smefilename, b->outfilename);
- } else {
- strcpy(smefilename, "unnamed");
- }
- strcat(smefilename, ".smesh");
-
- if (!b->quiet) {
- printf("Writing %s.\n", smefilename);
- }
- outfile = fopen(smefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", smefilename);
- return;
- }
-
- fprintf(outfile, "# %s. TetGen's input file.\n", smefilename);
-
- nextras = in->numberofpointattributes;
- bmark = !b->nobound && in->pointmarkerlist;
-
- fprintf(outfile, "\n# part 1: node list.\n");
- // Number of points, number of dimensions, number of point attributes,
- // and number of boundary markers (zero or one).
- fprintf(outfile, "%ld %d %d %d\n", points->items, 3, nextras, bmark);
-
- points->traversalinit();
- pointloop = pointtraverse();
- pointnumber = in->firstnumber;
- while (pointloop != (point) NULL) {
- // Point coordinates.
- fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
- pointloop[0], pointloop[1], pointloop[2]);
- if (in->numberofpointattributes > 0) {
- // Write an attribute, ignore others if more than one.
- fprintf(outfile, " %.17g", pointloop[3]);
- }
- fprintf(outfile, "\n");
- setpointmark(pointloop, pointnumber);
- pointloop = pointtraverse();
- pointnumber++;
- }
-
- bmark = !b->nobound && in->facetmarkerlist;
-
- fprintf(outfile, "\n# part 2: facet list.\n");
- // Number of facets, boundary marker.
- fprintf(outfile, "%ld %d\n", subfaces->items, bmark);
-
- subfaces->traversalinit();
- faceloop.sh = shellfacetraverse(subfaces);
- while (faceloop.sh != (shellface *) NULL) {
- p1 = sorg(faceloop);
- p2 = sdest(faceloop);
- p3 = sapex(faceloop);
- if (bmark) {
- faceid = shellmark(faceloop) - 1;
- marker = in->facetmarkerlist[faceid];
- }
- fprintf(outfile, "3 %4d %4d %4d", pointmark(p1), pointmark(p2),
- pointmark(p3));
- if (bmark) {
- fprintf(outfile, " %d", marker);
- }
- fprintf(outfile, "\n");
- faceloop.sh = shellfacetraverse(subfaces);
- }
-
- fprintf(outfile, "\n# part 3: hole list.\n");
- fprintf(outfile, "0\n");
-
- fprintf(outfile, "\n# part 4: region list.\n");
- fprintf(outfile, "0\n");
-
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outmesh2medit() Write mesh to a .mesh file, which can be read and //
-// rendered by Medit (a free mesh viewer from INRIA). //
-// //
-// You can specify a filename (without suffix) in 'mfilename'. If you don't //
-// supply a filename (let mfilename be NULL), the default name stored in //
-// 'tetgenbehavior' will be used. The output file will have the suffix .mesh.//
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outmesh2medit(char* mfilename)
-{
- FILE *outfile;
- char mefilename[FILENAMESIZE];
- tetrahedron* tetptr;
- triface tface, tsymface;
- face segloop, checkmark;
- point pointloop, p1, p2, p3, p4;
- long faces;
- int pointnumber;
- int i;
-
- if (mfilename != (char *) NULL && mfilename[0] != '\0') {
- strcpy(mefilename, mfilename);
- } else if (b->outfilename[0] != '\0') {
- strcpy(mefilename, b->outfilename);
- } else {
- strcpy(mefilename, "unnamed");
- }
- strcat(mefilename, ".mesh");
-
- if (!b->quiet) {
- printf("Writing %s.\n", mefilename);
- }
- outfile = fopen(mefilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", mefilename);
- return;
- }
-
- fprintf(outfile, "MeshVersionFormatted 1\n");
- fprintf(outfile, "\n");
- fprintf(outfile, "Dimension\n");
- fprintf(outfile, "3\n");
- fprintf(outfile, "\n");
-
- fprintf(outfile, "\n# Set of mesh vertices\n");
- fprintf(outfile, "Vertices\n");
- fprintf(outfile, "%ld\n", points->items);
-
- points->traversalinit();
- pointloop = pointtraverse();
- pointnumber = 1; // Medit need start number form 1.
- while (pointloop != (point) NULL) {
- // Point coordinates.
- fprintf(outfile, "%.17g %.17g %.17g",
- pointloop[0], pointloop[1], pointloop[2]);
- if (in->numberofpointattributes > 0) {
- // Write an attribute, ignore others if more than one.
- fprintf(outfile, " %.17g\n", pointloop[3]);
- } else {
- fprintf(outfile, " 0\n");
- }
- setpointmark(pointloop, pointnumber);
- pointloop = pointtraverse();
- pointnumber++;
- }
-
- // Compute the number of edges.
- faces = (4l * tetrahedrons->items + hullsize) / 2l;
-
- fprintf(outfile, "\n# Set of Triangles\n");
- fprintf(outfile, "Triangles\n");
- fprintf(outfile, "%ld\n", faces);
-
- tetrahedrons->traversalinit();
- tface.tet = tetrahedrontraverse();
- // To loop over the set of faces, loop over all tetrahedra, and look at
- // the four faces of each tetrahedron. If there isn't another tetrahedron
- // adjacent to the face, operate on the face. If there is another adj-
- // acent tetrahedron, operate on the face only if the current tetrahedron
- // has a smaller pointer than its neighbor. This way, each face is
- // considered only once.
- while (tface.tet != (tetrahedron *) NULL) {
- for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
- sym(tface, tsymface);
- if (tface.tet < tsymface.tet || tsymface.tet == dummytet) {
- p1 = org (tface);
- p2 = dest(tface);
- p3 = apex(tface);
- fprintf(outfile, "%5d %5d %5d",
- pointmark(p1), pointmark(p2), pointmark(p3));
- fprintf(outfile, " 0\n");
- }
- }
- tface.tet = tetrahedrontraverse();
- }
-
- fprintf(outfile, "\n# Set of Tetrahedra\n");
- fprintf(outfile, "Tetrahedra\n");
- fprintf(outfile, "%ld\n", tetrahedrons->items);
-
- tetrahedrons->traversalinit();
- tetptr = tetrahedrontraverse();
- while (tetptr != (tetrahedron *) NULL) {
- p1 = (point) tetptr[4];
- p2 = (point) tetptr[5];
- p3 = (point) tetptr[6];
- p4 = (point) tetptr[7];
- fprintf(outfile, "%5d %5d %5d %5d",
- pointmark(p1), pointmark(p2), pointmark(p3), pointmark(p4));
- if (in->numberoftetrahedronattributes > 0) {
- fprintf(outfile, " %.17g", elemattribute(tetptr, 0));
- } else {
- fprintf(outfile, " 0");
- }
- fprintf(outfile, "\n");
- tetptr = tetrahedrontraverse();
- }
-
- fprintf(outfile, "\nCorners\n");
- fprintf(outfile, "%d\n", in->numberofpoints);
-
- for (i = 0; i < in->numberofpoints; i++) {
- fprintf(outfile, "%4d\n", i + 1);
- }
-
- if (b->useshelles) {
- fprintf(outfile, "\nEdges\n");
- fprintf(outfile, "%ld\n", subsegs->items);
-
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- p1 = sorg(segloop);
- p2 = sdest(segloop);
- fprintf(outfile, "%5d %5d", pointmark(p1), pointmark(p2));
- fprintf(outfile, " 0\n");
- segloop.sh = shellfacetraverse(subsegs);
- }
- }
-
- fprintf(outfile, "\nEnd\n");
- fclose(outfile);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outmesh2gid() Write mesh to a .ele.msh file and a .face.msh file, //
-// which can be imported and rendered by Gid. //
-// //
-// You can specify a filename (without suffix) in 'gfilename'. If you don't //
-// supply a filename (let gfilename be NULL), the default name stored in //
-// 'tetgenbehavior' will be used. The suffixes (.ele.msh and .face.msh) will //
-// be automatically added. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outmesh2gid(char* gfilename)
-{
- FILE *outfile;
- char gidfilename[FILENAMESIZE];
- tetrahedron* tetptr;
- triface tface, tsymface;
- face sface;
- point pointloop, p1, p2, p3, p4;
- int pointnumber;
- int elementnumber;
-
- if (gfilename != (char *) NULL && gfilename[0] != '\0') {
- strcpy(gidfilename, gfilename);
- } else if (b->outfilename[0] != '\0') {
- strcpy(gidfilename, b->outfilename);
- } else {
- strcpy(gidfilename, "unnamed");
- }
- strcat(gidfilename, ".ele.msh");
-
- if (!b->quiet) {
- printf("Writing %s.\n", gidfilename);
- }
- outfile = fopen(gidfilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", gidfilename);
- return;
- }
-
- fprintf(outfile, "mesh dimension = 3 elemtype tetrahedron nnode = 4\n");
- fprintf(outfile, "coordinates\n");
-
- points->traversalinit();
- pointloop = pointtraverse();
- pointnumber = 1; // Gid need start number form 1.
- while (pointloop != (point) NULL) {
- // Point coordinates.
- fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
- pointloop[0], pointloop[1], pointloop[2]);
- if (in->numberofpointattributes > 0) {
- // Write an attribute, ignore others if more than one.
- fprintf(outfile, " %.17g", pointloop[3]);
- }
- fprintf(outfile, "\n");
- setpointmark(pointloop, pointnumber);
- pointloop = pointtraverse();
- pointnumber++;
- }
-
- fprintf(outfile, "end coordinates\n");
- fprintf(outfile, "elements\n");
-
- tetrahedrons->traversalinit();
- tetptr = tetrahedrontraverse();
- elementnumber = 1;
- while (tetptr != (tetrahedron *) NULL) {
- p1 = (point) tetptr[4];
- p2 = (point) tetptr[5];
- p3 = (point) tetptr[6];
- p4 = (point) tetptr[7];
- fprintf(outfile, "%5d %5d %5d %5d %5d", elementnumber,
- pointmark(p1), pointmark(p2), pointmark(p3), pointmark(p4));
- if (in->numberoftetrahedronattributes > 0) {
- fprintf(outfile, " %.17g", elemattribute(tetptr, 0));
- }
- fprintf(outfile, "\n");
- tetptr = tetrahedrontraverse();
- elementnumber++;
- }
-
- fprintf(outfile, "end elements\n");
- fclose(outfile);
-
- if (gfilename != (char *) NULL && gfilename[0] != '\0') {
- strcpy(gidfilename, gfilename);
- } else if (b->outfilename[0] != '\0') {
- strcpy(gidfilename, b->outfilename);
- } else {
- strcpy(gidfilename, "unnamed");
- }
- strcat(gidfilename, ".face.msh");
-
- if (!b->quiet) {
- printf("Writing %s.\n", gidfilename);
- }
- outfile = fopen(gidfilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", gidfilename);
- return;
- }
-
- fprintf(outfile, "mesh dimension = 3 elemtype triangle nnode = 3\n");
- fprintf(outfile, "coordinates\n");
-
- points->traversalinit();
- pointloop = pointtraverse();
- pointnumber = 1; // Gid need start number form 1.
- while (pointloop != (point) NULL) {
- // Point coordinates.
- fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
- pointloop[0], pointloop[1], pointloop[2]);
- if (in->numberofpointattributes > 0) {
- // Write an attribute, ignore others if more than one.
- fprintf(outfile, " %.17g", pointloop[3]);
- }
- fprintf(outfile, "\n");
- setpointmark(pointloop, pointnumber);
- pointloop = pointtraverse();
- pointnumber++;
- }
-
- fprintf(outfile, "end coordinates\n");
- fprintf(outfile, "elements\n");
-
- tetrahedrons->traversalinit();
- tface.tet = tetrahedrontraverse();
- elementnumber = 1;
- while (tface.tet != (tetrahedron *) NULL) {
- for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
- sym(tface, tsymface);
- if ((tface.tet < tsymface.tet) || (tsymface.tet == dummytet)) {
- p1 = org(tface);
- p2 = dest(tface);
- p3 = apex(tface);
- if (tsymface.tet == dummytet) {
- // It's a hull face, output it.
- fprintf(outfile, "%5d %d %d %d\n", elementnumber,
- pointmark(p1), pointmark(p2), pointmark(p3));
- elementnumber++;
- } else if (b->useshelles) {
- // Only output it if it's a subface.
- tspivot(tface, sface);
- if (sface.sh != dummysh) {
- fprintf(outfile, "%5d %d %d %d\n", elementnumber,
- pointmark(p1), pointmark(p2), pointmark(p3));
- elementnumber++;
- }
- }
- }
- }
- tface.tet = tetrahedrontraverse();
- }
-
- fprintf(outfile, "end elements\n");
- fclose(outfile);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// outmesh2off() Write the mesh to an .off file. //
-// //
-// .off, the Object File Format, is one of the popular file formats from the //
-// Geometry Center's Geomview package (http://www.geomview.org). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::outmesh2off(char* ofilename)
-{
- FILE *outfile;
- char offfilename[FILENAMESIZE];
- triface tface, tsymface;
- point pointloop, p1, p2, p3;
- long faces;
- int shift;
-
- if (ofilename != (char *) NULL && ofilename[0] != '\0') {
- strcpy(offfilename, ofilename);
- } else if (b->outfilename[0] != '\0') {
- strcpy(offfilename, b->outfilename);
- } else {
- strcpy(offfilename, "unnamed");
- }
- strcat(offfilename, ".off");
-
- if (!b->quiet) {
- printf("Writing %s.\n", offfilename);
- }
- outfile = fopen(offfilename, "w");
- if (outfile == (FILE *) NULL) {
- printf("File I/O Error: Cannot create file %s.\n", offfilename);
- return;
- }
-
- // Calculate the number of triangular faces in the tetrahedral mesh.
- faces = (4l * tetrahedrons->items + hullsize) / 2l;
-
- // Number of points, faces, and edges(not used, here show hullsize).
- fprintf(outfile, "OFF\n%ld %ld %ld\n", points->items, faces, hullsize);
-
- // Write the points.
- points->traversalinit();
- pointloop = pointtraverse();
- while (pointloop != (point) NULL) {
- fprintf(outfile, " %.17g %.17g %.17g\n", pointloop[0], pointloop[1],
- pointloop[2]);
- pointloop = pointtraverse();
- }
-
- // OFF always use zero as the first index.
- shift = in->firstnumber == 1 ? 1 : 0;
-
- tetrahedrons->traversalinit();
- tface.tet = tetrahedrontraverse();
- // To loop over the set of faces, loop over all tetrahedra, and look at
- // the four faces of each tetrahedron. If there isn't another tetrahedron
- // adjacent to the face, operate on the face. If there is another adj-
- // acent tetrahedron, operate on the face only if the current tetrahedron
- // has a smaller pointer than its neighbor. This way, each face is
- // considered only once.
- while (tface.tet != (tetrahedron *) NULL) {
- for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
- sym(tface, tsymface);
- if ((tface.tet < tsymface.tet) || (tsymface.tet == dummytet)) {
- p1 = org(tface);
- p2 = dest(tface);
- p3 = apex(tface);
- // Face number, indices of three vertexs.
- fprintf(outfile, "3 %4d %4d %4d\n", pointmark(p1) - shift,
- pointmark(p2) - shift, pointmark(p3) - shift);
- }
- }
- tface.tet = tetrahedrontraverse();
- }
-
- fprintf(outfile, "# Generated by %s\n", b->commandline);
- fclose(outfile);
-}
-
-//
-// End of I/O rouitnes
-//
-
-//
-// Begin of user interaction routines
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// internalerror() Ask the user to send me the defective product. Exit. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::internalerror()
-{
- printf(" Please report this bug to sihang@mail.berlios.de. Include the\n");
- printf(" message above, your input data set, and the exact command\n");
- printf(" line you used to run this program, thank you.\n");
- exit(1);
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checkmesh() Test the mesh for topological consistency. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::checkmesh()
-{
- triface tetraloop;
- triface oppotet, oppooppotet;
- point tetorg, tetdest, tetapex, tetoppo;
- point oppodest, oppoapex;
- REAL oritest;
- int horrors;
-
- if (!b->quiet) {
- printf(" Checking consistency of mesh...\n");
- }
- horrors = 0;
- // Run through the list of tetrahedra, checking each one.
- tetrahedrons->traversalinit();
- tetraloop.tet = tetrahedrontraverse();
- while (tetraloop.tet != (tetrahedron *) NULL) {
- // Check all four faces of the tetrahedron.
- for (tetraloop.loc = 0; tetraloop.loc < 4; tetraloop.loc++) {
- tetorg = org(tetraloop);
- tetdest = dest(tetraloop);
- tetapex = apex(tetraloop);
- tetoppo = oppo(tetraloop);
- if (tetraloop.loc == 0) { // Only test for inversion once.
- oritest = orient3d(tetorg, tetdest, tetapex, tetoppo);
- if (oritest >= 0.0) {
- printf(" !! !! %s ", oritest > 0.0 ? "Inverted" : "Degenerated");
- printtet(&tetraloop);
- printf(" orient3d = %.17g.\n", oritest);
- horrors++;
- }
- }
- // Find the neighboring tetrahedron on this face.
- sym(tetraloop, oppotet);
- if (oppotet.tet != dummytet) {
- // Check that the tetrahedron's neighbor knows it's a neighbor.
- sym(oppotet, oppooppotet);
- if ((tetraloop.tet != oppooppotet.tet)
- || (tetraloop.loc != oppooppotet.loc)) {
- printf(" !! !! Asymmetric tetra-tetra bond:\n");
- if (tetraloop.tet == oppooppotet.tet) {
- printf(" (Right tetrahedron, wrong orientation)\n");
- }
- printf(" First ");
- printtet(&tetraloop);
- printf(" Second (nonreciprocating) ");
- printtet(&oppotet);
- horrors++;
- }
- // Check that both tetrahedra agree on the identities
- // of their shared vertices.
- if (findorg(&oppotet, tetorg)) {
- oppodest = dest(oppotet);
- oppoapex = apex(oppotet);
- } else {
- oppodest = (point) NULL;
- }
- if ((tetdest != oppoapex) || (tetapex != oppodest)) {
- printf(" !! !! Mismatched face coordinates between two tetras:\n");
- printf(" First mismatched ");
- printtet(&tetraloop);
- printf(" Second mismatched ");
- printtet(&oppotet);
- horrors++;
- }
- }
- }
- tetraloop.tet = tetrahedrontraverse();
- }
- if (horrors == 0) {
- if (!b->quiet) {
- printf(" In my studied opinion, the mesh appears to be consistent.\n");
- }
- } else if (horrors == 1) {
- printf(" !! !! !! !! Precisely one festering wound discovered.\n");
- } else {
- printf(" !! !! !! !! %d abominations witnessed.\n", horrors);
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checkshells() Test the boundary mesh for topological consistency. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::checkshells()
-{
- triface oppotet, oppooppotet, testtet;
- face shloop, segloop, spin;
- face testsh, testseg, testshsh;
- point shorg, shdest, segorg, segdest;
- REAL checksign;
- bool same;
- int horrors;
- int i;
-
- if (!b->quiet) {
- printf(" Checking consistency of the mesh boundary...\n");
- }
- horrors = 0;
-
- // Run through the list of subfaces, checking each one.
- subfaces->traversalinit();
- shloop.sh = shellfacetraverse(subfaces);
- while (shloop.sh != (shellface *) NULL) {
- // Check two connected tetrahedra if they exist.
- shloop.shver = 0;
- stpivot(shloop, oppotet);
- if (oppotet.tet != dummytet) {
- tspivot(oppotet, testsh);
- if (testsh.sh != shloop.sh) {
- printf(" !! !! Wrong tetra-subface connection.\n");
- printf(" Tetra: ");
- printtet(&oppotet);
- printf(" Subface: ");
- printsh(&shloop);
- horrors++;
- }
- if (oppo(oppotet) != (point) NULL) {
- adjustedgering(oppotet, CCW);
- checksign = orient3d(sorg(shloop), sdest(shloop), sapex(shloop),
- oppo(oppotet));
- if (checksign >= 0.0) {
- printf(" !! !! Wrong subface orientation.\n");
- printf(" Subface: ");
- printsh(&shloop);
- horrors++;
- }
- }
- }
- sesymself(shloop);
- stpivot(shloop, oppooppotet);
- if (oppooppotet.tet != dummytet) {
- tspivot(oppooppotet, testsh);
- if (testsh.sh != shloop.sh) {
- printf(" !! !! Wrong tetra-subface connection.\n");
- printf(" Tetra: ");
- printtet(&oppooppotet);
- printf(" Subface: ");
- printsh(&shloop);
- horrors++;
- }
- if (oppotet.tet != dummytet) {
- sym(oppotet, testtet);
- if (testtet.tet != oppooppotet.tet) {
- printf(" !! !! Wrong tetra-subface-tetra connection.\n");
- printf(" Tetra 1: ");
- printtet(&oppotet);
- printf(" Subface: ");
- printsh(&shloop);
- printf(" Tetra 2: ");
- printtet(&oppooppotet);
- horrors++;
- }
- }
- if (oppo(oppooppotet) != (point) NULL) {
- adjustedgering(oppooppotet, CCW);
- checksign = orient3d(sorg(shloop), sdest(shloop), sapex(shloop),
- oppo(oppooppotet));
- if (checksign >= 0.0) {
- printf(" !! !! Wrong subface orientation.\n");
- printf(" Subface: ");
- printsh(&shloop);
- horrors++;
- }
- }
- }
- // Check connection between subfaces.
- shloop.shver = 0;
- for (i = 0; i < 3; i++) {
- shorg = sorg(shloop);
- shdest = sdest(shloop);
- sspivot(shloop, testseg);
- if (testseg.sh != dummysh) {
- segorg = sorg(testseg);
- segdest = sdest(testseg);
- same = ((shorg == segorg) && (shdest == segdest))
- || ((shorg == segdest) && (shdest == segorg));
- if (!same) {
- printf(" !! !! Wrong subface-subsegment connection.\n");
- printf(" Subface: ");
- printsh(&shloop);
- printf(" Subsegment: ");
- printsh(&testseg);
- horrors++;
- }
- }
- spivot(shloop, testsh);
- if (testsh.sh != dummysh) {
- segorg = sorg(testsh);
- segdest = sdest(testsh);
- same = ((shorg == segorg) && (shdest == segdest))
- || ((shorg == segdest) && (shdest == segorg));
- if (!same) {
- printf(" !! !! Wrong subface-subface connection.\n");
- printf(" Subface 1: ");
- printsh(&shloop);
- printf(" Subface 2: ");
- printsh(&testsh);
- horrors++;
- }
- spivot(testsh, testshsh);
- shorg = sorg(testshsh);
- shdest = sdest(testshsh);
- same = ((shorg == segorg) && (shdest == segdest))
- || ((shorg == segdest) && (shdest == segorg));
- if (!same) {
- printf(" !! !! Wrong subface-subface connection.\n");
- printf(" Subface 1: ");
- printsh(&testsh);
- printf(" Subface 2: ");
- printsh(&testshsh);
- horrors++;
- }
- if (testseg.sh == dummysh) {
- if (testshsh.sh != shloop.sh) {
- printf(" !! !! Wrong subface-subface connection.\n");
- printf(" Subface 1: ");
- printsh(&shloop);
- printf(" Subface 2: ");
- printsh(&testsh);
- horrors++;
- }
- }
- }
- senextself(shloop);
- }
- shloop.sh = shellfacetraverse(subfaces);
- }
-
- // Run through the list of subsegs, checking each one.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- segorg = sorg(segloop);
- segdest = sdest(segloop);
- spivot(segloop, testsh);
- if (testsh.sh == dummysh) {
- printf(" !! !! Wrong subsegment-subface connection.\n");
- printf(" Subsegment: ");
- printsh(&segloop);
- horrors++;
- segloop.sh = shellfacetraverse(subsegs);
- continue;
- }
- shorg = sorg(testsh);
- shdest = sdest(testsh);
- same = ((shorg == segorg) && (shdest == segdest))
- || ((shorg == segdest) && (shdest == segorg));
- if (!same) {
- printf(" !! !! Wrong subsegment-subface connection.\n");
- printf(" Subsegment : ");
- printsh(&segloop);
- printf(" Subface : ");
- printsh(&testsh);
- horrors++;
- segloop.sh = shellfacetraverse(subsegs);
- continue;
- }
- // Check the connection of face loop around this subsegment.
- spin = testsh;
- i = 0;
- do {
- spivotself(spin);
- shorg = sorg(spin);
- shdest = sdest(spin);
- same = ((shorg == segorg) && (shdest == segdest))
- || ((shorg == segdest) && (shdest == segorg));
- if (!same) {
- printf(" !! !! Wrong subsegment-subface connection.\n");
- printf(" Subsegment : ");
- printsh(&segloop);
- printf(" Subface : ");
- printsh(&testsh);
- horrors++;
- break;
- }
- i++;
- } while (spin.sh != testsh.sh && i < 1000);
- if (i >= 1000) {
- printf(" !! !! Wrong subsegment-subface connection.\n");
- printf(" Subsegment : ");
- printsh(&segloop);
- horrors++;
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
- if (horrors == 0) {
- if (!b->quiet) {
- printf(" Mesh boundaries connected correctly.\n");
- }
- } else {
- printf(" !! !! !! !! %d boundary connection viewed with horror.\n",
- horrors);
- return;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checkdelaunay() Ensure that the mesh is constrained Delaunay. //
-// //
-// If 'flipqueue' is not NULL, non-locally Delaunay faces are saved in it. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::checkdelaunay(queue* flipqueue)
-{
- triface tetraloop;
- triface oppotet;
- face opposhelle;
- point tetorg, tetdest, tetapex, tetoppo;
- point oppooppo;
- REAL sign;
- int shouldbedelaunay;
- int horrors;
-
- if (!b->quiet) {
- printf(" Checking Delaunay property of the mesh...\n");
- }
- horrors = 0;
- // Run through the list of triangles, checking each one.
- tetrahedrons->traversalinit();
- tetraloop.tet = tetrahedrontraverse();
- while (tetraloop.tet != (tetrahedron *) NULL) {
- // Check all four faces of the tetrahedron.
- for (tetraloop.loc = 0; tetraloop.loc < 4; tetraloop.loc++) {
- tetorg = org(tetraloop);
- tetdest = dest(tetraloop);
- tetapex = apex(tetraloop);
- tetoppo = oppo(tetraloop);
- sym(tetraloop, oppotet);
- oppooppo = oppo(oppotet);
- // Only test that the face is locally Delaunay if there is an
- // adjoining tetrahedron whose pointer is larger (to ensure that
- // each pair isn't tested twice).
- shouldbedelaunay = (oppotet.tet != dummytet)
- && (tetoppo != (point) NULL)
- && (oppooppo != (point) NULL)
- && (tetraloop.tet < oppotet.tet);
- if (checksubfaces && shouldbedelaunay) {
- // If a shell edge separates the triangles, then the edge is
- // constrained, so no local Delaunay test should be done.
- tspivot(tetraloop, opposhelle);
- if (opposhelle.sh != dummysh){
- shouldbedelaunay = 0;
- }
- }
- if (shouldbedelaunay) {
- sign = insphere(tetdest, tetorg, tetapex, tetoppo, oppooppo);
- if (checksubfaces && sign > 0.0) {
- if (iscospheric(tetdest, tetorg, tetapex, tetoppo, oppooppo,
- b->epsilon)) sign = 0.0;
- }
- if (sign > 0.0) {
- if (flipqueue) {
- enqueueflipface(tetraloop, flipqueue);
- } else {
- printf(" !! Non-locally Delaunay face (%d, %d, %d).\n",
- pointmark(tetorg), pointmark(tetdest), pointmark(tetapex));
- }
- horrors++;
- }
- }
- }
- tetraloop.tet = tetrahedrontraverse();
- }
- if (flipqueue == (queue *) NULL) {
- if (horrors == 0) {
- if (!b->quiet) {
- printf(" The mesh is %s.\n",
- checksubfaces ? "constrained Delaunay" : "Delaunay");
- }
- } else {
- printf(" !! !! !! !! %d obscenities viewed with horror.\n", horrors);
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// checkconforming() Ensure that the mesh is conforming Delaunay. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::checkconforming()
-{
- face segloop, shloop;
- int encsubsegs, encsubfaces;
-
- if (!b->quiet) {
- printf(" Checking conforming Delaunay property of mesh...\n");
- }
- encsubsegs = encsubfaces = 0;
- // Run through the list of subsegments, check each one.
- subsegs->traversalinit();
- segloop.sh = shellfacetraverse(subsegs);
- while (segloop.sh != (shellface *) NULL) {
- if (checkseg4encroach(&segloop, NULL, false)) {
- printf(" !! !! Non-conforming subsegment: ");
- printsh(&segloop);
- encsubsegs++;
- }
- segloop.sh = shellfacetraverse(subsegs);
- }
- // Run through the list of subfaces, check each one.
- subfaces->traversalinit();
- shloop.sh = shellfacetraverse(subfaces);
- while (shloop.sh != (shellface *) NULL) {
- if (checksub4encroach(&shloop, NULL, false)) {
- printf(" !! !! Non-conforming subface: ");
- printsh(&shloop);
- encsubfaces++;
- }
- shloop.sh = shellfacetraverse(subfaces);
- }
- if (encsubsegs == 0 && encsubfaces == 0) {
- if (!b->quiet) {
- printf(" The mesh is conforming Delaunay.\n");
- }
- } else {
- if (encsubsegs > 0) {
- printf(" !! !! %d subsegments are non-conforming.\n", encsubsegs);
- }
- if (encsubfaces > 0) {
- printf(" !! !! %d subfaces are non-conforming.\n", encsubfaces);
- }
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// qualitystatistics() Print statistics about the quality of the mesh. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::qualitystatistics()
-{
- triface tetloop;
- point p[4];
- char sbuf[128];
- REAL radiusratiotable[12];
- REAL aspectratiotable[16];
- REAL dx[6], dy[6], dz[6];
- REAL edgelength[6];
- REAL alldihed[6];
- REAL cent[3];
- REAL shortest, longest;
- REAL smallestvolume, biggestvolume;
- REAL smallestdiangle, biggestdiangle;
- REAL tetvol;
- REAL tetlongest2;
- REAL minaltitude;
- REAL cirradius, insradius;
- REAL shortlen, longlen;
- REAL tetaspect, tetradius;
- REAL smalldiangle, bigdiangle;
- int radiustable[12];
- int aspecttable[16];
- int dihedangletable[18];
- int radiusindex;
- int aspectindex;
- int tendegree;
- int i, j, k;
-
- printf("Mesh quality statistics:\n\n");
-
- radiusratiotable[0] = 0.707; radiusratiotable[1] = 1.0;
- radiusratiotable[2] = 1.1; radiusratiotable[3] = 1.2;
- radiusratiotable[4] = 1.4; radiusratiotable[5] = 1.6;
- radiusratiotable[6] = 1.8; radiusratiotable[7] = 2.0;
- radiusratiotable[8] = 2.5; radiusratiotable[9] = 3.0;
- radiusratiotable[10] = 10.0; radiusratiotable[11] = 0.0;
-
- aspectratiotable[0] = 1.5; aspectratiotable[1] = 2.0;
- aspectratiotable[2] = 2.5; aspectratiotable[3] = 3.0;
- aspectratiotable[4] = 4.0; aspectratiotable[5] = 6.0;
- aspectratiotable[6] = 10.0; aspectratiotable[7] = 15.0;
- aspectratiotable[8] = 25.0; aspectratiotable[9] = 50.0;
- aspectratiotable[10] = 100.0; aspectratiotable[11] = 300.0;
- aspectratiotable[12] = 1000.0; aspectratiotable[13] = 10000.0;
- aspectratiotable[14] = 100000.0; aspectratiotable[15] = 0.0;
-
- for (i = 0; i < 12; i++) {
- radiustable[i] = 0;
- }
- for (i = 0; i < 16; i++) {
- aspecttable[i] = 0;
- }
- for (i = 0; i < 18; i++) {
- dihedangletable[i] = 0;
- }
-
- minaltitude = xmax - xmin + ymax - ymin + zmax - zmin;
- minaltitude = minaltitude * minaltitude;
- shortest = minaltitude;
- longest = 0.0;
- smallestvolume = minaltitude;
- biggestvolume = 0.0;
- smallestdiangle = 180.0;
- biggestdiangle = 0.0;
-
- // Loop all elements, calculate quality parameters for each element.
- tetrahedrons->traversalinit();
- tetloop.tet = tetrahedrontraverse();
- while (tetloop.tet != (tetrahedron *) NULL) {
- p[0] = org(tetloop);
- p[1] = dest(tetloop);
- p[2] = apex(tetloop);
- p[3] = oppo(tetloop);
- tetlongest2 = 0.0;
-
- // Calculate the longest and shortest edge length.
- for (i = 0; i < 3; i++) {
- j = plus1mod3[i];
- k = minus1mod3[i];
- dx[i] = p[j][0] - p[k][0];
- dy[i] = p[j][1] - p[k][1];
- dz[i] = p[j][2] - p[k][2];
- edgelength[i] = dx[i] * dx[i] + dy[i] * dy[i] + dz[i] * dz[i];
- if (i == 0) {
- shortlen = longlen = edgelength[i];
- } else {
- shortlen = edgelength[i] < shortlen ? edgelength[i] : shortlen;
- longlen = edgelength[i] > longlen ? edgelength[i] : longlen;
- }
- if (edgelength[i] > tetlongest2) {
- tetlongest2 = edgelength[i];
- }
- if (edgelength[i] > longest) {
- longest = edgelength[i];
- }
- if (edgelength[i] < shortest) {
- shortest = edgelength[i];
- }
- }
- for (i = 3; i < 6; i++) {
- j = i - 3;
- k = 3;
- dx[i] = p[j][0] - p[k][0];
- dy[i] = p[j][1] - p[k][1];
- dz[i] = p[j][2] - p[k][2];
- edgelength[i] = dx[i] * dx[i] + dy[i] * dy[i] + dz[i] * dz[i];
- shortlen = edgelength[i] < shortlen ? edgelength[i] : shortlen;
- longlen = edgelength[i] > longlen ? edgelength[i] : longlen;
- if (edgelength[i] > tetlongest2) {
- tetlongest2 = edgelength[i];
- }
- if (edgelength[i] > longest) {
- longest = edgelength[i];
- }
- if (edgelength[i] < shortest) {
- shortest = edgelength[i];
- }
- }
-
- // Calculate the largest and smallest volume.
- tetvol = orient3d(p[0], p[1], p[2], p[3]) / 6.0;
- if (tetvol < 0) tetvol = -tetvol;
- if (tetvol < smallestvolume) {
- smallestvolume = tetvol;
- }
- if (tetvol > biggestvolume) {
- biggestvolume = tetvol;
- }
-
- // Calculate the largest and smallest dihedral angles.
- tetalldihedral(p[0], p[1], p[2], p[3], alldihed);
- for (i = 0; i < 6; i++) {
- alldihed[i] = alldihed[i] * 180.0 / PI;
- if (i == 0) {
- smalldiangle = bigdiangle = alldihed[i];
- } else {
- smalldiangle = alldihed[i] < smalldiangle ? alldihed[i] : smalldiangle;
- bigdiangle = alldihed[i] > bigdiangle ? alldihed[i] : bigdiangle;
- }
- if (alldihed[i] < smallestdiangle) {
- smallestdiangle = alldihed[i];
- } else if (alldihed[i] > biggestdiangle) {
- biggestdiangle = alldihed[i];
- }
- }
- tendegree = (int) (smalldiangle / 10.);
- dihedangletable[tendegree]++;
- tendegree = (int) (bigdiangle / 10.);
- dihedangletable[tendegree]++;
-
- // Calculate aspect ratio and radius-edge ratio for this element.
- tetaspect = 0.0;
- if (!circumsphere(p[0], p[1], p[2], p[3], cent, &cirradius)) {
- // ! Very bad element.
- tetaspect = 1.e+8;
- tetradius = 100.0;
- } else {
- inscribedsphere(p[0], p[1], p[2], p[3], cent, &insradius);
- }
- if (tetaspect == 0.0) {
- tetradius = cirradius / sqrt(shortlen);
- tetaspect = sqrt(longlen) / (2.0 * insradius);
-
- }
- aspectindex = 0;
- while ((tetaspect > aspectratiotable[aspectindex]) && (aspectindex < 15)) {
- aspectindex++;
- }
- aspecttable[aspectindex]++;
- radiusindex = 0;
- while ((tetradius > radiusratiotable[radiusindex]) && (radiusindex < 11)) {
- radiusindex++;
- }
- radiustable[radiusindex]++;
-
- tetloop.tet = tetrahedrontraverse();
- }
-
- shortest = sqrt(shortest);
- longest = sqrt(longest);
- minaltitude = sqrt(minaltitude);
-
- printf(" Smallest volume: %16.5g | Largest volume: %16.5g\n",
- smallestvolume, biggestvolume);
- printf(" Shortest edge: %16.5g | Longest edge: %16.5g\n",
- shortest, longest);
- sprintf(sbuf, "%.17g", biggestdiangle);
- if (strlen(sbuf) > 8) {
- sbuf[8] = '\0';
- }
- printf(" Smallest dihedral: %14.5g | Largest dihedral: %s\n\n",
- smallestdiangle, sbuf);
-
- printf(" Radius-edge ratio histogram:\n");
- printf(" < %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
- radiusratiotable[0], radiustable[0], radiusratiotable[5],
- radiusratiotable[6], radiustable[6]);
- for (i = 1; i < 5; i++) {
- printf(" %6.6g - %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
- radiusratiotable[i - 1], radiusratiotable[i], radiustable[i],
- radiusratiotable[i + 5], radiusratiotable[i + 6],
- radiustable[i + 6]);
- }
- printf(" %6.6g - %-6.6g : %8d | %6.6g - : %8d\n",
- radiusratiotable[4], radiusratiotable[5], radiustable[5],
- radiusratiotable[10], radiustable[11]);
- printf(" (A tetrahedron's radius-edge ratio is its radius of ");
- printf("circumsphere divided\n");
- printf(" by its shortest edge length)\n\n");
-
- printf(" Aspect ratio histogram:\n");
- printf(" 1.1547 - %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
- aspectratiotable[0], aspecttable[0], aspectratiotable[7],
- aspectratiotable[8], aspecttable[8]);
- for (i = 1; i < 7; i++) {
- printf(" %6.6g - %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
- aspectratiotable[i - 1], aspectratiotable[i], aspecttable[i],
- aspectratiotable[i + 7], aspectratiotable[i + 8],
- aspecttable[i + 8]);
- }
- printf(" %6.6g - %-6.6g : %8d | %6.6g - : %8d\n",
- aspectratiotable[6], aspectratiotable[7], aspecttable[7],
- aspectratiotable[14], aspecttable[15]);
- printf(" (A tetrahedron's aspect ratio is its longest edge length");
- printf(" divided by the\n");
- printf(" diameter of its inscribed sphere)\n\n");
-
- printf(" Dihedral Angle histogram:\n");
- for (i = 0; i < 9; i++) {
- printf(" %3d - %2d degrees: %8d | %3d - %3d degrees: %8d\n",
- i * 10, i * 10 + 10, dihedangletable[i],
- i * 10 + 90, i * 10 + 100, dihedangletable[i + 9]);
- }
- printf("\n");
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// statistics() Print all sorts of cool facts. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetgenmesh::statistics()
-{
- printf("\nStatistics:\n\n");
- printf(" Input points: %d\n", in->numberofpoints);
- if (b->refine) {
- printf(" Input tetrahedra: %d\n", in->numberoftetrahedra);
- }
- if (b->plc) {
- printf(" Input facets: %d\n", in->numberoffacets);
- printf(" Input holes: %d\n", in->numberofholes);
- printf(" Input regions: %d\n", in->numberofregions);
- }
-
- printf("\n Mesh points: %ld\n", points->items);
- printf(" Mesh tetrahedra: %ld\n", tetrahedrons->items);
- if (b->plc || b->refine) {
- printf(" Mesh faces: %ld\n", (4l * tetrahedrons->items + hullsize) / 2l);
- }
- if (b->plc || b->refine) {
- printf(" Mesh subfaces: %ld\n", subfaces->items);
- printf(" Mesh subsegments: %ld\n\n", subsegs->items);
- } else {
- printf(" Convex hull faces: %ld\n\n", hullsize);
- }
- if (b->verbose) {
- // if (b->quality || b->removesliver) {
- qualitystatistics();
- // }
- printf("\n");
- }
-}
-
-//
-// End of user interaction routines
-//
-
-//
-// Begin of constructor and destructor of tetgenmesh
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// ~tetgenmesh() Deallocte memory occupied by a tetgenmesh object. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::~tetgenmesh()
-{
- in = (tetgenio *) NULL;
- b = (tetgenbehavior *) NULL;
-
- if (tetrahedrons != (memorypool *) NULL) {
- delete tetrahedrons;
- }
- if (subfaces != (memorypool *) NULL) {
- delete subfaces;
- }
- if (subsegs != (memorypool *) NULL) {
- delete subsegs;
- }
- if (points != (memorypool *) NULL) {
- delete points;
- }
- if (dummytetbase != (tetrahedron *) NULL) {
- delete [] dummytetbase;
- }
- if (dummyshbase != (shellface *) NULL) {
- delete [] dummyshbase;
- }
- if (liftpointarray != (REAL *) NULL) {
- delete [] liftpointarray;
- }
- if (highordertable != (point *) NULL) {
- delete [] highordertable;
- }
-}
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetgenmesh() Initialize a tetgenmesh object. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-tetgenmesh::tetgenmesh()
-{
- in = (tetgenio *) NULL;
- b = (tetgenbehavior *) NULL;
-
- tetrahedrons = (memorypool *) NULL;
- subfaces = (memorypool *) NULL;
- subsegs = (memorypool *) NULL;
- points = (memorypool *) NULL;
- badsubsegs = (memorypool *) NULL;
- badsubfaces = (memorypool *) NULL;
- badtetrahedrons = (memorypool *) NULL;
- flipstackers = (memorypool *) NULL;
-
- dummytet = (tetrahedron *) NULL;
- dummytetbase = (tetrahedron *) NULL;
- dummysh = (shellface *) NULL;
- dummyshbase = (shellface *) NULL;
-
- liftpointarray = (REAL *) NULL;
- highordertable = (point *) NULL;
-
- xmax = xmin = ymax = ymin = zmax = zmin = 0.0;
- longest = 0.0;
- hullsize = 0l;
- insegment = 0l;
- pointmarkindex = 0;
- point2simindex = 0;
- highorderindex = 0;
- elemattribindex = 0;
- volumeboundindex = 0;
- shmarkindex = 0;
- areaboundindex = 0;
- checksubfaces = 0;
- checkquality = 0;
- nonconvex = 0;
- dupverts = 0;
- samples = 0l;
- randomseed = 0l;
- macheps = 0.0;
- flip23s = flip32s = flip22s = flip44s = 0l;
-}
-
-//
-// End of constructor and destructor of tetgenmesh
-//
-
-//
-// End of class 'tetgenmesh' implementation.
-//
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetrahedralize() The interface for users using TetGen library to //
-// generate tetrahedral meshes with all features. //
-// //
-// The sequence is roughly as follows. Many of these steps can be skipped, //
-// depending on the command line switches. //
-// //
-// - Initialize constants and parse the command line. //
-// - Read the vertices from a file and either //
-// - tetrahedralize them (no -r), or //
-// - read an old mesh from files and reconstruct it (-r). //
-// - Insert the PLC segments and facets (-p). //
-// - Read the holes (-p), regional attributes (-pA), and regional volume //
-// constraints (-pa). Carve the holes and concavities, and spread the //
-// regional attributes and volume constraints. //
-// - Enforce the constraints on minimum quality bound (-q) and maximum //
-// volume (-a). Also enforce the conforming Delaunay property (-q and -a). //
-// - Promote the mesh's linear tetrahedra to higher order elements (-o). //
-// - Write the output files and print the statistics. //
-// - Check the consistency and Delaunay property of the mesh (-C). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-#include <time.h> // Defined type clock_t, constant CLOCKS_PER_SEC.
-
-void tetrahedralize(tetgenbehavior *b, tetgenio *in, tetgenio *out)
-{
- tetgenmesh m;
- clock_t tv0, tv1, tv2, tv3, tv4, tv5, tv6, tv7, tv8;
-
- if (!b->quiet) {
- tv0 = clock();
- }
-
- m.b = b;
- m.in = in;
-
- m.macheps = exactinit();
- m.initializepointpool();
- m.initializetetshpools();
- m.steinerleft = b->steiner;
-
- if (!b->quiet) {
- tv1 = clock();
- }
-
- m.transfernodes();
- if (b->refine) {
- m.reconstructmesh();
- } else {
- m.incrflipdelaunay();
- }
-
- if (!b->quiet) {
- tv2 = clock();
- if (b->refine) {
- printf("Mesh reconstruction seconds: %g\n",
- (tv2 - tv1) / (REAL) CLOCKS_PER_SEC);
- } else if (!b->detectinter) {
- printf("Delaunay seconds: %g\n", (tv2 - tv1) / (REAL) CLOCKS_PER_SEC);
- }
- }
-
- if (b->useshelles && !b->refine) {
- m.insegment = m.meshsurface();
- if (b->detectinter) {
- m.detectinterfaces();
- } else {
- if (!b->nobisect) {
- m.delaunizesegments();
- m.checksubfaces = 1;
- m.constrainedfacets();
- }
- }
- }
-
- if (!b->quiet) {
- tv3 = clock();
- if (b->useshelles && !b->refine) {
- if (b->detectinter) {
- printf("Intersection seconds: %g\n",
- (tv3 - tv2) / (REAL) CLOCKS_PER_SEC);
- } else {
- if (!b->nobisect) {
- printf("Segment and facet seconds: %g\n",
- (tv3 - tv2) / (REAL) CLOCKS_PER_SEC);
- }
- }
- }
- }
-
- if (b->plc && !b->refine && !b->detectinter) {
- if (b->checkclosure) {
- m.indenthull();
- } else {
- m.carveholes();
- }
- m.nonconvex = 1;
- }
-
- if (!b->quiet) {
- tv4 = clock();
- if (b->plc && !b->refine && !b->detectinter) {
- printf("Hole seconds: %g\n", (tv4 - tv3) / (REAL) CLOCKS_PER_SEC);
- }
- }
-
- if ((b->plc || b->refine) && !b->detectinter && !b->checkclosure) {
- m.removeilltets();
- }
-
- if (!b->quiet) {
- tv5 = clock();
- if ((b->plc || b->refine) && !b->detectinter) {
- printf("Repair seconds: %g\n", (tv5 - tv4) / (REAL) CLOCKS_PER_SEC);
- }
- }
-
- if (b->insertaddpoints) {
- if (in->numberofaddpoints == 0) {
- in->load_addnodes(b->infilename);
- }
- if (in->numberofaddpoints > 0) {
- m.insertaddpoints();
- }
- }
-
- if (!b->quiet) {
- tv6 = clock();
- if ((b->plc || b->refine) && (in->numberofaddpoints > 0)) {
- printf("Add points seconds: %g\n", (tv6 - tv5) / (REAL) CLOCKS_PER_SEC);
- }
- }
-
- if (b->quality && (m.tetrahedrons->items > 0)) {
- m.enforcequality();
- }
-
- if (!b->quiet) {
- tv7 = clock();
- if (b->quality && (m.tetrahedrons->items > 0)) {
- printf("Quality seconds: %g\n", (tv7 - tv6) / (REAL) CLOCKS_PER_SEC);
- }
- }
-
- if ((b->plc || b->refine) && b->removesliver) {
- m.removeslivers();
- }
-
- if (!b->quiet) {
- tv8 = clock();
- if ((b->plc || b->refine) && b->removesliver) {
- printf("Sliver repair seconds: %g\n",
- (tv8 - tv7) / (REAL) CLOCKS_PER_SEC);
- }
- }
-
- if (b->order > 1) {
- m.highorder();
- }
-
- if (!b->quiet) {
- printf("\n");
- }
-
- if (out != (tetgenio *) NULL) {
- out->firstnumber = in->firstnumber;
- out->mesh_dim = in->mesh_dim;
- }
-
- if (b->nonodewritten || b->noiterationnum) {
- if (!b->quiet) {
- printf("NOT writing a .node file.\n");
- }
- } else {
- if (b->detectinter) {
- if (m.subfaces->items > 0l) {
- // Only output when there are intersecting faces.
- m.outnodes(out);
- }
- } else {
- m.outnodes(out);
- }
- }
-
- if (b->noelewritten) {
- if (!b->quiet) {
- printf("NOT writing an .ele file.\n");
- }
- } else {
- if (!b->detectinter) {
- if (m.tetrahedrons->items > 0l) {
- m.outelements(out);
- }
- }
- }
-
- if (b->nofacewritten) {
- if (!b->quiet) {
- printf("NOT writing an .face file.\n");
- }
- } else {
- if (b->facesout) {
- if (m.tetrahedrons->items > 0l) {
- // Output all faces.
- m.outfaces(out);
- }
- } else {
- if (b->detectinter) {
- if (m.subfaces->items > 0l) {
- // Only output when there are intersecting faces.
- m.outsubfaces(out);
- }
- } else if (b->plc || b->refine) {
- if (m.tetrahedrons->items > 0l) {
- // Output boundary faces.
- m.outsubfaces(out);
- }
- } else {
- if (m.tetrahedrons->items > 0l) {
- // Output convex hull faces.
- m.outhullfaces(out);
- }
- }
- }
- }
-
- if (b->edgesout && b->plc) {
- m.outsubsegments(out);
- }
-
- if (!out && b->plc && ((b->object == tetgenbehavior::OFF) ||
- (b->object == tetgenbehavior::PLY) ||
- (b->object == tetgenbehavior::STL))) {
- m.outsmesh(b->outfilename);
- }
-
- if (!out && b->meditview) {
- m.outmesh2medit(b->outfilename);
- }
-
- if (!out && b->gidview) {
- m.outmesh2gid(b->outfilename);
- }
-
- if (!out && b->geomview) {
- m.outmesh2off(b->outfilename);
- }
-
- if (b->neighout) {
- m.outneighbors(out);
- }
-
- if (!b->quiet) {
- tv7 = clock();
- printf("\nOutput seconds: %g\n", (tv7 - tv6) / (REAL) CLOCKS_PER_SEC);
- printf("Total running seconds: %g\n",
- (tv7 - tv0) / (REAL) CLOCKS_PER_SEC);
- }
-
- if (b->docheck) {
- m.checkmesh();
- if (m.checksubfaces) {
- m.checkshells();
- }
- if (b->docheck > 1) {
- m.checkdelaunay(NULL);
- if (b->docheck > 2) {
- if (b->quality || b->refine) {
- m.checkconforming();
- }
- }
- }
- }
-
- if (!b->quiet) {
- m.statistics();
- }
-}
-
-#ifndef TETLIBRARY
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// main() The entrance for running TetGen from command line. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-int main(int argc, char *argv[])
-
-#else // with TETLIBRARY
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetrahedralize() The entrance for calling TetGen from another program. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetrahedralize(char *switches, tetgenio *in, tetgenio *out)
-
-#endif // not TETLIBRARY
-
-{
- tetgenbehavior b;
-
-#ifndef TETLIBRARY
-
- tetgenio in;
-
- if (!b.parse_commandline(argc, argv)) {
- exit(1);
- }
- if (b.refine) {
- if (!in.load_tetmesh(b.infilename)) {
- exit(1);
- }
- } else {
- if (!in.load_plc(b.infilename, (int) b.object)) {
- exit(1);
- }
- }
- tetrahedralize(&b, &in, NULL);
-
- return 0;
-
-#else // with TETLIBRARY
-
- if (!b.parse_commandline(switches)) {
- exit(1);
- }
- tetrahedralize(&b, in, out);
-
-#endif // not TETLIBRARY
-}
+///////////////////////////////////////////////////////////////////////////////
+// //
+// TetGen //
+// //
+// A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator //
+// //
+// Version 1.3.4 //
+// June 13, 2005 //
+// //
+// Copyright 2002, 2004, 2005 //
+// Hang Si //
+// Rathausstr. 9, 10178 Berlin, Germany //
+// si@wias-berlin.de //
+// //
+// You can obtain TetGen via internet: http://tetgen.berlios.de. It may be //
+// freely copied, modified, and redistributed under the copyright notices //
+// given in the file LICENSE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetgen.cxx //
+// //
+// The C++ implementation file of the TetGen library. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+#include "tetgen.h"
+
+//
+// Begin of class 'tetgenio' implementation
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// initialize() Initialize all variables of 'tetgenio'. //
+// //
+// It is called by the only class constructor 'tetgenio()' implicitly. Thus, //
+// all variables are guaranteed to be initialized. Each array is initialized //
+// to be a 'NULL' pointer, and its length is equal zero. Some variables have //
+// their default value, 'firstnumber' equals zero, 'mesh_dim' equals 3, and //
+// 'numberofcorners' equals 4. Another possible use of this routine is to //
+// call it before to re-use an object. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::initialize()
+{
+ firstnumber = 0; // Default item index is numbered from Zero.
+ mesh_dim = 3; // Default mesh dimension is 3.
+
+ pointlist = (REAL *) NULL;
+ pointattributelist = (REAL *) NULL;
+ addpointlist = (REAL *) NULL;
+ pointmarkerlist = (int *) NULL;
+ numberofpoints = 0;
+ numberofpointattributes = 0;
+ numberofaddpoints = 0;
+
+ tetrahedronlist = (int *) NULL;
+ tetrahedronattributelist = (REAL *) NULL;
+ tetrahedronvolumelist = (REAL *) NULL;
+ neighborlist = (int *) NULL;
+ numberoftetrahedra = 0;
+ numberofcorners = 4; // Default is 4 nodes per element.
+ numberoftetrahedronattributes = 0;
+
+ trifacelist = (int *) NULL;
+ trifacemarkerlist = (int *) NULL;
+ numberoftrifaces = 0;
+
+ facetlist = (facet *) NULL;
+ facetmarkerlist = (int *) NULL;
+ numberoffacets = 0;
+
+ edgelist = (int *) NULL;
+ edgemarkerlist = (int *) NULL;
+ numberofedges = 0;
+
+ holelist = (REAL *) NULL;
+ numberofholes = 0;
+
+ regionlist = (REAL *) NULL;
+ numberofregions = 0;
+
+ facetconstraintlist = (REAL *) NULL;
+ numberoffacetconstraints = 0;
+
+ segmentconstraintlist = (REAL *) NULL;
+ numberofsegmentconstraints = 0;
+
+ nodeconstraintlist = (REAL *) NULL;
+ numberofnodeconstraints = 0;
+
+ pbcgrouplist = (pbcgroup *) NULL;
+ numberofpbcgroups = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// deinitialize() Free the memory allocated in 'tetgenio'. //
+// //
+// It is called by the class destructor '~tetgenio()' implicitly. Hence, the //
+// occupied memory by arrays of an object will be automatically released on //
+// the deletion of the object. However, this routine assumes that the memory //
+// is allocated by C++ memory allocation operator 'new', thus it is freed by //
+// the C++ array deletor 'delete []'. If one uses the C/C++ library function //
+// 'malloc()' to allocate memory for arrays, one has to free them with the //
+// 'free()' function, and call routine 'initialize()' once to disable this //
+// routine on deletion of the object. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::deinitialize()
+{
+ facet *f;
+ polygon *p;
+ pbcgroup *pg;
+ int i, j;
+
+ if (pointlist != (REAL *) NULL) {
+ delete [] pointlist;
+ }
+ if (pointattributelist != (REAL *) NULL) {
+ delete [] pointattributelist;
+ }
+ if (addpointlist != (REAL *) NULL) {
+ delete [] addpointlist;
+ }
+ if (pointmarkerlist != (int *) NULL) {
+ delete [] pointmarkerlist;
+ }
+
+ if (tetrahedronlist != (int *) NULL) {
+ delete [] tetrahedronlist;
+ }
+ if (tetrahedronattributelist != (REAL *) NULL) {
+ delete [] tetrahedronattributelist;
+ }
+ if (tetrahedronvolumelist != (REAL *) NULL) {
+ delete [] tetrahedronvolumelist;
+ }
+ if (neighborlist != (int *) NULL) {
+ delete [] neighborlist;
+ }
+
+ if (trifacelist != (int *) NULL) {
+ delete [] trifacelist;
+ }
+ if (trifacemarkerlist != (int *) NULL) {
+ delete [] trifacemarkerlist;
+ }
+
+ if (edgelist != (int *) NULL) {
+ delete [] edgelist;
+ }
+ if (edgemarkerlist != (int *) NULL) {
+ delete [] edgemarkerlist;
+ }
+
+ if (facetlist != (facet *) NULL) {
+ for (i = 0; i < numberoffacets; i++) {
+ f = &facetlist[i];
+ for (j = 0; j < f->numberofpolygons; j++) {
+ p = &f->polygonlist[j];
+ delete [] p->vertexlist;
+ }
+ delete [] f->polygonlist;
+ if (f->holelist != (REAL *) NULL) {
+ delete [] f->holelist;
+ }
+ }
+ delete [] facetlist;
+ }
+ if (facetmarkerlist != (int *) NULL) {
+ delete [] facetmarkerlist;
+ }
+
+ if (holelist != (REAL *) NULL) {
+ delete [] holelist;
+ }
+ if (regionlist != (REAL *) NULL) {
+ delete [] regionlist;
+ }
+ if (facetconstraintlist != (REAL *) NULL) {
+ delete [] facetconstraintlist;
+ }
+ if (segmentconstraintlist != (REAL *) NULL) {
+ delete [] segmentconstraintlist;
+ }
+ if (nodeconstraintlist != (REAL *) NULL) {
+ delete [] nodeconstraintlist;
+ }
+ if (pbcgrouplist != (pbcgroup *) NULL) {
+ for (i = 0; i < numberofpbcgroups; i++) {
+ pg = &(pbcgrouplist[i]);
+ if (pg->pointpairlist != (int *) NULL) {
+ delete [] pg->pointpairlist;
+ }
+ }
+ delete [] pbcgrouplist;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_node_call() Load a list of nodes. //
+// //
+// It is a support routine for routines: 'load_nodes()', 'load_poly()', and //
+// 'load_tetmesh()'. 'infile' is the file handle contains the node list. It //
+// may point to a .node, or .poly or .smesh file. 'markers' indicates each //
+// node contains an additional marker (integer) or not. 'infilename' is the //
+// name of the file being read, it is only appeared in error message. //
+// //
+// The 'firstnumber' (0 or 1) is automatically determined by the number of //
+// the first index of the first point. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_node_call(FILE* infile, int markers, char* infilename)
+{
+ char inputline[INPUTLINESIZE];
+ char *stringptr;
+ REAL x, y, z, attrib;
+ int firstnode, currentmarker;
+ int index, attribindex;
+ int i, j;
+
+ // Initialize 'pointlist', 'pointattributelist', and 'pointmarkerlist'.
+ pointlist = new REAL[numberofpoints * mesh_dim];
+ if (pointlist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ if (numberofpointattributes > 0) {
+ pointattributelist = new REAL[numberofpoints * numberofpointattributes];
+ if (pointattributelist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ if (markers) {
+ pointmarkerlist = new int[numberofpoints];
+ if (pointmarkerlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+
+ // Read the point section.
+ index = 0;
+ attribindex = 0;
+ for (i = 0; i < numberofpoints; i++) {
+ stringptr = readnumberline(inputline, infile, infilename);
+ if (i == 0) {
+ firstnode = (int) strtol (stringptr, &stringptr, 0);
+ if ((firstnode == 0) || (firstnode == 1)) {
+ firstnumber = firstnode;
+ }
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Point %d has no x coordinate.\n", firstnumber + i);
+ break;
+ }
+ x = (REAL) strtod(stringptr, &stringptr);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Point %d has no y coordinate.\n", firstnumber + i);
+ break;
+ }
+ y = (REAL) strtod(stringptr, &stringptr);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Point %d has no z coordinate.\n", firstnumber + i);
+ break;
+ }
+ z = (REAL) strtod(stringptr, &stringptr);
+ pointlist[index++] = x;
+ pointlist[index++] = y;
+ pointlist[index++] = z;
+ // Read the point attributes.
+ for (j = 0; j < numberofpointattributes; j++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ attrib = 0.0;
+ } else {
+ attrib = (REAL) strtod(stringptr, &stringptr);
+ }
+ pointattributelist[attribindex++] = attrib;
+ }
+ if (markers) {
+ // Read a point marker.
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ currentmarker = 0;
+ } else {
+ currentmarker = (int) strtol (stringptr, &stringptr, 0);
+ }
+ pointmarkerlist[i] = currentmarker;
+ }
+ }
+ if (i < numberofpoints) {
+ // Failed to read points due to some error.
+ delete [] pointlist;
+ pointlist = (REAL *) NULL;
+ if (markers) {
+ delete [] pointmarkerlist;
+ pointmarkerlist = (int *) NULL;
+ }
+ if (numberofpointattributes > 0) {
+ delete [] pointattributelist;
+ pointattributelist = (REAL *) NULL;
+ }
+ numberofpoints = 0;
+ return false;
+ }
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_node() Load a list of nodes from a .node file. //
+// //
+// 'filename' is the inputfile without suffix. The node list is in 'filename.//
+// node'. On completion, the node list is returned in 'pointlist'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_node(char* filename)
+{
+ FILE *infile;
+ char innodefilename[FILENAMESIZE];
+ char inputline[INPUTLINESIZE];
+ char *stringptr;
+ int markers;
+
+ // Assembling the actual file names we want to open.
+ strcpy(innodefilename, filename);
+ strcat(innodefilename, ".node");
+
+ // Try to open a .node file.
+ infile = fopen(innodefilename, "r");
+ if (infile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot access file %s.\n", innodefilename);
+ return false;
+ }
+ printf("Opening %s.\n", innodefilename);
+ // Read number of points, number of dimensions, number of point
+ // attributes, and number of boundary markers.
+ stringptr = readnumberline(inputline, infile, innodefilename);
+ numberofpoints = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ mesh_dim = 3;
+ } else {
+ mesh_dim = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ numberofpointattributes = 0;
+ } else {
+ numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ markers = 0;
+ } else {
+ markers = (int) strtol (stringptr, &stringptr, 0);
+ }
+
+ if (mesh_dim != 3) {
+ printf("Error: load_node() only works for 3D points.\n");
+ fclose(infile);
+ return false;
+ }
+ if (numberofpoints < 4) {
+ printf("File I/O error: There should have at least 4 points.\n");
+ fclose(infile);
+ return false;
+ }
+
+ // Load the list of nodes.
+ if (!load_node_call(infile, markers, innodefilename)) {
+ fclose(infile);
+ return false;
+ }
+ fclose(infile);
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_addnodes() Load a list of additional nodes into 'addpointlists'. //
+// //
+// 'filename' is the filename of the original inputfile without suffix. The //
+// additional nodes are found in file 'filename-a.node'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_addnodes(char* filename)
+{
+ FILE *infile;
+ char addnodefilename[FILENAMESIZE];
+ char inputline[INPUTLINESIZE];
+ char *stringptr;
+ REAL x, y, z;
+ int index;
+ int i;
+
+ // Additional nodes are saved in file "filename-a.node".
+ strcpy(addnodefilename, filename);
+ strcat(addnodefilename, "-a.node");
+ infile = fopen(addnodefilename, "r");
+ if (infile != (FILE *) NULL) {
+ printf("Opening %s.\n", addnodefilename);
+ } else {
+ // Strange! However, it is not a fatal error.
+ printf("Warning: Can't opening %s. Skipped.\n", addnodefilename);
+ numberofaddpoints = 0;
+ return false;
+ }
+
+ // Read the number of additional points.
+ stringptr = readnumberline(inputline, infile, addnodefilename);
+ numberofaddpoints = (int) strtol (stringptr, &stringptr, 0);
+ if (numberofaddpoints == 0) {
+ // It looks this file contains no point.
+ fclose(infile);
+ return false;
+ }
+ // Initialize 'addpointlist';
+ addpointlist = new REAL[numberofaddpoints * mesh_dim];
+ if (addpointlist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+
+ // Read the list of additional points.
+ index = 0;
+ for (i = 0; i < numberofaddpoints; i++) {
+ stringptr = readnumberline(inputline, infile, addnodefilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Point %d has no x coordinate.\n", firstnumber + i);
+ break;
+ }
+ x = (REAL) strtod(stringptr, &stringptr);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Point %d has no y coordinate.\n", firstnumber + i);
+ break;
+ }
+ y = (REAL) strtod(stringptr, &stringptr);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Point %d has no z coordinate.\n", firstnumber + i);
+ break;
+ }
+ z = (REAL) strtod(stringptr, &stringptr);
+ addpointlist[index++] = x;
+ addpointlist[index++] = y;
+ addpointlist[index++] = z;
+ }
+ fclose(infile);
+
+ if (i < numberofaddpoints) {
+ // Failed to read to additional points due to some error.
+ delete [] addpointlist;
+ addpointlist = (REAL *) NULL;
+ numberofaddpoints = 0;
+ return false;
+ }
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_pbc() Load a list of pbc groups into 'pbcgrouplist'. //
+// //
+// 'filename' is the filename of the original inputfile without suffix. The //
+// pbc groups are found in file 'filename.pbc'. //
+// //
+// This routine will be called both in load_poly() and load_tetmesh(). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_pbc(char* filename)
+{
+ FILE *infile;
+ char pbcfilename[FILENAMESIZE];
+ char inputline[INPUTLINESIZE];
+ char *stringptr;
+ pbcgroup *pg;
+ int index, p1, p2;
+ int i, j, k;
+
+ // Pbc groups are saved in file "filename.pbc".
+ strcpy(pbcfilename, filename);
+ strcat(pbcfilename, ".pbc");
+ infile = fopen(pbcfilename, "r");
+ if (infile != (FILE *) NULL) {
+ printf("Opening %s.\n", pbcfilename);
+ } else {
+ // No such file. Return.
+ return false;
+ }
+
+ // Read the number of pbc groups.
+ stringptr = readnumberline(inputline, infile, pbcfilename);
+ numberofpbcgroups = (int) strtol (stringptr, &stringptr, 0);
+ if (numberofpbcgroups == 0) {
+ // It looks this file contains no point.
+ fclose(infile);
+ return false;
+ }
+ // Initialize 'pbcgrouplist';
+ pbcgrouplist = new pbcgroup[numberofpbcgroups];
+ if (pbcgrouplist == (pbcgroup *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+
+ // Read the list of pbc groups.
+ for (i = 0; i < numberofpbcgroups; i++) {
+ pg = &(pbcgrouplist[i]);
+ // Initialize pbcgroup i;
+ pg->numberofpointpairs = 0;
+ pg->pointpairlist = (int *) NULL;
+ // Read 'fmark1', 'fmark2'.
+ stringptr = readnumberline(inputline, infile, pbcfilename);
+ if (*stringptr == '\0') break;
+ pg->fmark1 = (int) strtol(stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') break;
+ pg->fmark2 = (int) strtol(stringptr, &stringptr, 0);
+ // Read 'transmat'.
+ do {
+ stringptr = readline(inputline, infile, NULL);
+ } while ((*stringptr != '[') && (*stringptr != '\0'));
+ if (*stringptr == '\0') break;
+ for (j = 0; j < 4; j++) {
+ for (k = 0; k < 4; k++) {
+ // Read the entry of [j, k].
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ // Try to read another line.
+ stringptr = readnumberline(inputline, infile, pbcfilename);
+ if (*stringptr == '\0') break;
+ }
+ pg->transmat[j][k] = (REAL) strtod(stringptr, &stringptr);
+ }
+ if (k < 4) break; // Not complete!
+ }
+ if (j < 4) break; // Not complete!
+ // Read 'numberofpointpairs'.
+ stringptr = readnumberline(inputline, infile, pbcfilename);
+ if (*stringptr == '\0') break;
+ pg->numberofpointpairs = (int) strtol(stringptr, &stringptr, 0);
+ if (pg->numberofpointpairs > 0) {
+ pg->pointpairlist = new int[pg->numberofpointpairs * 2];
+ // Read the point pairs.
+ index = 0;
+ for (j = 0; j < pg->numberofpointpairs; j++) {
+ stringptr = readnumberline(inputline, infile, pbcfilename);
+ p1 = (int) strtol(stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ p2 = (int) strtol(stringptr, &stringptr, 0);
+ pg->pointpairlist[index++] = p1;
+ pg->pointpairlist[index++] = p2;
+ }
+ }
+ }
+ fclose(infile);
+
+ if (i < numberofpbcgroups) {
+ // Failed to read to additional points due to some error.
+ delete [] pbcgrouplist;
+ pbcgrouplist = (pbcgroup *) NULL;
+ numberofpbcgroups = 0;
+ return false;
+ }
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_var() Load variant constraints applied on facets, segments, nodes.//
+// //
+// 'filename' is the filename of the original inputfile without suffix. The //
+// constraints are found in file 'filename.var'. //
+// //
+// This routine will be called both in load_poly() and load_tetmesh(). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_var(char* filename)
+{
+ FILE *infile;
+ char varfilename[FILENAMESIZE];
+ char inputline[INPUTLINESIZE];
+ char *stringptr;
+ int index;
+ int i;
+
+ // Variant constraints are saved in file "filename.var".
+ strcpy(varfilename, filename);
+ strcat(varfilename, ".var");
+ infile = fopen(varfilename, "r");
+ if (infile != (FILE *) NULL) {
+ printf("Opening %s.\n", varfilename);
+ } else {
+ // No such file. Return.
+ return false;
+ }
+
+ // Read the facet constraint section.
+ stringptr = readnumberline(inputline, infile, varfilename);
+ if (*stringptr != '\0') {
+ numberoffacetconstraints = (int) strtol (stringptr, &stringptr, 0);
+ } else {
+ numberoffacetconstraints = 0;
+ }
+ if (numberoffacetconstraints > 0) {
+ // Initialize 'facetconstraintlist'.
+ facetconstraintlist = new REAL[numberoffacetconstraints * 2];
+ index = 0;
+ for (i = 0; i < numberoffacetconstraints; i++) {
+ stringptr = readnumberline(inputline, infile, varfilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: facet constraint %d has no facet marker.\n",
+ firstnumber + i);
+ break;
+ } else {
+ facetconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: facet constraint %d has no maximum area bound.\n",
+ firstnumber + i);
+ break;
+ } else {
+ facetconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ }
+ if (i < numberoffacetconstraints) {
+ // This must be caused by an error.
+ fclose(infile);
+ return false;
+ }
+ }
+
+ // Read the segment constraint section.
+ stringptr = readnumberline(inputline, infile, varfilename);
+ if (*stringptr != '\0') {
+ numberofsegmentconstraints = (int) strtol (stringptr, &stringptr, 0);
+ } else {
+ numberofsegmentconstraints = 0;
+ }
+ if (numberofsegmentconstraints > 0) {
+ // Initialize 'segmentconstraintlist'.
+ segmentconstraintlist = new REAL[numberofsegmentconstraints * 3];
+ index = 0;
+ for (i = 0; i < numberofsegmentconstraints; i++) {
+ stringptr = readnumberline(inputline, infile, varfilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: segment constraint %d has no frist endpoint.\n",
+ firstnumber + i);
+ break;
+ } else {
+ segmentconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: segment constraint %d has no second endpoint.\n",
+ firstnumber + i);
+ break;
+ } else {
+ segmentconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: segment constraint %d has no maximum length bound.\n",
+ firstnumber + i);
+ break;
+ } else {
+ segmentconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ }
+ if (i < numberofsegmentconstraints) {
+ // This must be caused by an error.
+ fclose(infile);
+ return false;
+ }
+ }
+
+ // Read the node constraint section. It is optional.
+ stringptr = readnumberline(inputline, infile, NULL);
+ if (stringptr != (char *) NULL && *stringptr != '\0') {
+ numberofnodeconstraints = (int) strtol (stringptr, &stringptr, 0);
+ } else {
+ numberofnodeconstraints = 0;
+ }
+ if (numberofnodeconstraints > 0) {
+ // Initialize 'nodeconstraintlist'.
+ nodeconstraintlist = new REAL[numberofnodeconstraints * 2];
+ index = 0;
+ for (i = 0; i < numberofnodeconstraints; i++) {
+ stringptr = readnumberline(inputline, infile, varfilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: node constraint %d has no node index.\n",
+ firstnumber + i);
+ break;
+ } else {
+ nodeconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: node constraint %d has no edge length bound.\n",
+ firstnumber + i);
+ break;
+ } else {
+ nodeconstraintlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ }
+ if (i < numberofnodeconstraints) {
+ // This must be caused by an error.
+ fclose(infile);
+ return false;
+ }
+ }
+
+ fclose(infile);
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_poly() Load a piecewise linear complex from a .poly or .smesh. //
+// //
+// 'filename' is the inputfile without suffix. The PLC is in 'filename.poly' //
+// or 'filename.smesh', and possibly plus 'filename.node' (when the first //
+// line of the file starts with a zero). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_poly(char* filename)
+{
+ FILE *infile, *polyfile;
+ char innodefilename[FILENAMESIZE];
+ char inpolyfilename[FILENAMESIZE];
+ char insmeshfilename[FILENAMESIZE];
+ char inputline[INPUTLINESIZE];
+ char *stringptr, *infilename;
+ int smesh, markers, currentmarker;
+ int readnodefile, index;
+ int i, j, k;
+
+ // Assembling the actual file names we want to open.
+ strcpy(innodefilename, filename);
+ strcpy(inpolyfilename, filename);
+ strcpy(insmeshfilename, filename);
+ strcat(innodefilename, ".node");
+ strcat(inpolyfilename, ".poly");
+ strcat(insmeshfilename, ".smesh");
+
+ // First assume it is a .poly file.
+ smesh = 0;
+ // Try to open a .poly file.
+ polyfile = fopen(inpolyfilename, "r");
+ if (polyfile == (FILE *) NULL) {
+ // .poly doesn't exist! Try to open a .smesh file.
+ polyfile = fopen(insmeshfilename, "r");
+ if (polyfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot access file %s and %s.\n",
+ inpolyfilename, insmeshfilename);
+ return false;
+ } else {
+ printf("Opening %s.\n", insmeshfilename);
+ }
+ smesh = 1;
+ } else {
+ printf("Opening %s.\n", inpolyfilename);
+ }
+ // Initialize the default values.
+ mesh_dim = 3; // Three-dimemsional accoordinates.
+ numberofpointattributes = 0; // no point attribute.
+ markers = 0; // no boundary marker.
+ // Read number of points, number of dimensions, number of point
+ // attributes, and number of boundary markers.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ numberofpoints = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ mesh_dim = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ markers = (int) strtol (stringptr, &stringptr, 0);
+ }
+ if (numberofpoints > 0) {
+ readnodefile = 0;
+ if (smesh) {
+ infilename = insmeshfilename;
+ } else {
+ infilename = inpolyfilename;
+ }
+ infile = polyfile;
+ } else {
+ // If the .poly or .smesh file claims there are zero points, that
+ // means the points should be read from a separate .node file.
+ readnodefile = 1;
+ infilename = innodefilename;
+ }
+
+ if (readnodefile) {
+ // Read the points from the .node file.
+ printf("Opening %s.\n", innodefilename);
+ infile = fopen(innodefilename, "r");
+ if (infile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot access file %s.\n", innodefilename);
+ return false;
+ }
+ // Initialize the default values.
+ mesh_dim = 3; // Three-dimemsional accoordinates.
+ numberofpointattributes = 0; // no point attribute.
+ markers = 0; // no boundary marker.
+ // Read number of points, number of dimensions, number of point
+ // attributes, and number of boundary markers.
+ stringptr = readnumberline(inputline, infile, innodefilename);
+ numberofpoints = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ mesh_dim = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ markers = (int) strtol (stringptr, &stringptr, 0);
+ }
+ }
+
+ if (mesh_dim != 3) {
+ printf("Error: load_poly() only works for 3D points.\n");
+ fclose(infile);
+ return false;
+ }
+ if (numberofpoints < 4) {
+ printf("File I/O error: There should have at least 4 points.\n");
+ fclose(infile);
+ return false;
+ }
+
+ // Load the list of nodes.
+ if (!load_node_call(infile, markers, infilename)) {
+ fclose(infile);
+ return false;
+ }
+
+ if (readnodefile) {
+ fclose(infile);
+ }
+
+ // Read number of facets and number of boundary markers.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ numberoffacets = (int) strtol (stringptr, &stringptr, 0);
+ if (numberoffacets <= 0) {
+ // No facet list, return.
+ fclose(polyfile);
+ return true;
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ markers = 0; // no boundary marker.
+ } else {
+ markers = (int) strtol (stringptr, &stringptr, 0);
+ }
+
+ // Initialize the 'facetlist', 'facetmarkerlist'.
+ facetlist = new facet[numberoffacets];
+ if (markers == 1) {
+ facetmarkerlist = new int[numberoffacets];
+ }
+
+ facet *f;
+ polygon *p;
+
+ // Read data into 'facetlist', 'facetmarkerlist'.
+ if (smesh == 0) {
+ // Facets are in .poly file format.
+ for (i = 1; i <= numberoffacets; i++) {
+ f = &(facetlist[i - 1]);
+ init(f);
+ f->numberofholes = 0;
+ currentmarker = 0;
+ // Read number of polygons, number of holes, and a boundary marker.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ f->numberofpolygons = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ f->numberofholes = (int) strtol (stringptr, &stringptr, 0);
+ if (markers == 1) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr != '\0') {
+ currentmarker = (int) strtol(stringptr, &stringptr, 0);
+ }
+ }
+ }
+ // Initialize facetmarker if it needs.
+ if (markers == 1) {
+ facetmarkerlist[i - 1] = currentmarker;
+ }
+ // Each facet should has at least one polygon.
+ if (f->numberofpolygons <= 0) {
+ printf("Error: Wrong number of polygon in %d facet.\n", i);
+ break;
+ }
+ // Initialize the 'f->polygonlist'.
+ f->polygonlist = new polygon[f->numberofpolygons];
+ // Go through all polygons, read in their vertices.
+ for (j = 1; j <= f->numberofpolygons; j++) {
+ p = &(f->polygonlist[j - 1]);
+ init(p);
+ // Read number of vertices of this polygon.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ p->numberofvertices = (int) strtol(stringptr, &stringptr, 0);
+ if (p->numberofvertices < 1) {
+ printf("Error: Wrong polygon %d in facet %d\n", j, i);
+ break;
+ }
+ // Initialize 'p->vertexlist'.
+ p->vertexlist = new int[p->numberofvertices];
+ // Read all vertices of this polygon.
+ for (k = 1; k <= p->numberofvertices; k++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ // Try to load another non-empty line and continue to read the
+ // rest of vertices.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ if (*stringptr == '\0') {
+ printf("Error: Missing %d endpoints of polygon %d in facet %d",
+ p->numberofvertices - k, j, i);
+ break;
+ }
+ }
+ p->vertexlist[k - 1] = (int) strtol (stringptr, &stringptr, 0);
+ }
+ }
+ if (j <= f->numberofpolygons) {
+ // This must be caused by an error. However, there're j - 1 polygons
+ // have been read. Reset the 'f->numberofpolygon'.
+ if (j == 1) {
+ // This is the first polygon.
+ delete [] f->polygonlist;
+ }
+ f->numberofpolygons = j - 1;
+ // No hole will be read even it exists.
+ f->numberofholes = 0;
+ break;
+ }
+ // If this facet has holes pints defined, read them.
+ if (f->numberofholes > 0) {
+ // Initialize 'f->holelist'.
+ f->holelist = new REAL[f->numberofholes * 3];
+ // Read the holes' coordinates.
+ index = 0;
+ for (j = 1; j <= f->numberofholes; j++) {
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ for (k = 1; k <= 3; k++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Hole %d in facet %d has no coordinates", j, i);
+ break;
+ }
+ f->holelist[index++] = (REAL) strtod (stringptr, &stringptr);
+ }
+ if (k <= 3) {
+ // This must be caused by an error.
+ break;
+ }
+ }
+ if (j <= f->numberofholes) {
+ // This must be caused by an error.
+ break;
+ }
+ }
+ }
+ if (i <= numberoffacets) {
+ // This must be caused by an error.
+ numberoffacets = i - 1;
+ fclose(polyfile);
+ return false;
+ }
+ } else { // poly == 0
+ // Read the facets from a .smesh file.
+ for (i = 1; i <= numberoffacets; i++) {
+ f = &(facetlist[i - 1]);
+ init(f);
+ // Initialize 'f->facetlist'. In a .smesh file, each facetlist only
+ // contains exactly one polygon, no hole.
+ f->numberofpolygons = 1;
+ f->polygonlist = new polygon[f->numberofpolygons];
+ p = &(f->polygonlist[0]);
+ init(p);
+ // Read number of vertices of this polygon.
+ stringptr = readnumberline(inputline, polyfile, insmeshfilename);
+ p->numberofvertices = (int) strtol (stringptr, &stringptr, 0);
+ if (p->numberofvertices < 1) {
+ printf("Error: Wrong number of vertex in facet %d\n", i);
+ break;
+ }
+ // Initialize 'p->vertexlist'.
+ p->vertexlist = new int[p->numberofvertices];
+ for (k = 1; k <= p->numberofvertices; k++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ // Try to load another non-empty line and continue to read the
+ // rest of vertices.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ if (*stringptr == '\0') {
+ printf("Error: Missing %d endpoints in facet %d",
+ p->numberofvertices - k, i);
+ break;
+ }
+ }
+ p->vertexlist[k - 1] = (int) strtol (stringptr, &stringptr, 0);
+ }
+ if (k <= p->numberofvertices) {
+ // This must be caused by an error.
+ break;
+ }
+ // Read facet's boundary marker at last.
+ if (markers == 1) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ currentmarker = 0;
+ } else {
+ currentmarker = (int) strtol(stringptr, &stringptr, 0);
+ }
+ facetmarkerlist[i - 1] = currentmarker;
+ }
+ }
+ if (i <= numberoffacets) {
+ // This must be caused by an error.
+ numberoffacets = i - 1;
+ fclose(polyfile);
+ return false;
+ }
+ }
+
+ // Read the hole section.
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ if (*stringptr != '\0') {
+ numberofholes = (int) strtol (stringptr, &stringptr, 0);
+ } else {
+ numberofholes = 0;
+ }
+ if (numberofholes > 0) {
+ // Initialize 'holelist'.
+ holelist = new REAL[numberofholes * 3];
+ for (i = 0; i < 3 * numberofholes; i += 3) {
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Hole %d has no x coord.\n", firstnumber + (i / 3));
+ break;
+ } else {
+ holelist[i] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Hole %d has no y coord.\n", firstnumber + (i / 3));
+ break;
+ } else {
+ holelist[i + 1] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Hole %d has no z coord.\n", firstnumber + (i / 3));
+ break;
+ } else {
+ holelist[i + 2] = (REAL) strtod(stringptr, &stringptr);
+ }
+ }
+ if (i < 3 * numberofholes) {
+ // This must be caused by an error.
+ fclose(polyfile);
+ return false;
+ }
+ }
+
+ // Read the region section. The 'region' section is optional, if we don't
+ // reach the end-of-file, try read it in.
+ stringptr = readnumberline(inputline, polyfile, NULL);
+ if (stringptr != (char *) NULL && *stringptr != '\0') {
+ numberofregions = (int) strtol (stringptr, &stringptr, 0);
+ } else {
+ numberofregions = 0;
+ }
+ if (numberofregions > 0) {
+ // Initialize 'regionlist'.
+ regionlist = new REAL[numberofregions * 5];
+ index = 0;
+ for (i = 0; i < numberofregions; i++) {
+ stringptr = readnumberline(inputline, polyfile, inpolyfilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Region %d has no x coordinate.\n", firstnumber + i);
+ break;
+ } else {
+ regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Region %d has no y coordinate.\n", firstnumber + i);
+ break;
+ } else {
+ regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Region %d has no z coordinate.\n", firstnumber + i);
+ break;
+ } else {
+ regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Region %d has no region attrib.\n", firstnumber + i);
+ break;
+ } else {
+ regionlist[index++] = (REAL) strtod(stringptr, &stringptr);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ regionlist[index] = regionlist[index - 1];
+ } else {
+ regionlist[index] = (REAL) strtod(stringptr, &stringptr);
+ }
+ index++;
+ }
+ if (i < numberofregions) {
+ // This must be caused by an error.
+ fclose(polyfile);
+ return false;
+ }
+ }
+
+ // End of reading poly/smesh file.
+ fclose(polyfile);
+
+ // Try to read a .pbc file if it exists.
+ load_pbc(filename);
+
+ // Try to load a .cons file if it exists.
+ load_var(filename);
+
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_off() Load a polyhedron described in a .off file. //
+// //
+// The .off format is one of file formats of the Geomview, an interactive //
+// program for viewing and manipulating geometric objects. More information //
+// is available form: http://www.geomview.org. //
+// //
+// 'filename' is a input filename with extension .off or without extension ( //
+// the .off will be added in this case). On completion, the polyhedron is //
+// returned in 'pointlist' and 'facetlist'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_off(char* filename)
+{
+ FILE *fp;
+ tetgenio::facet *f;
+ tetgenio::polygon *p;
+ char infilename[FILENAMESIZE];
+ char buffer[INPUTLINESIZE];
+ char *bufferp;
+ double *coord;
+ int nverts = 0, iverts = 0;
+ int nfaces = 0, ifaces = 0;
+ int nedges = 0;
+ int line_count = 0, i;
+
+ strncpy(infilename, filename, 1024 - 1);
+ infilename[FILENAMESIZE - 1] = '\0';
+ if (infilename[0] == '\0') {
+ printf("Error: No filename.\n");
+ return false;
+ }
+ if (strcmp(&infilename[strlen(infilename) - 4], ".off") != 0) {
+ strcat(infilename, ".off");
+ }
+
+ if (!(fp = fopen(infilename, "r"))) {
+ printf("File I/O Error: Unable to open file %s\n", infilename);
+ return false;
+ }
+ printf("Opening %s.\n", infilename);
+
+ // OFF requires the index starts from '0'.
+ firstnumber = 0;
+
+ while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
+ // Check section
+ if (nverts == 0) {
+ // Read header
+ bufferp = strstr(bufferp, "OFF");
+ if (bufferp != NULL) {
+ // Read mesh counts
+ bufferp = findnextnumber(bufferp); // Skip field "OFF".
+ if (*bufferp == '\0') {
+ // Read a non-empty line.
+ bufferp = readline(buffer, fp, &line_count);
+ }
+ if ((sscanf(bufferp, "%d%d%d", &nverts, &nfaces, &nedges) != 3)
+ || (nverts == 0)) {
+ printf("Syntax error reading header on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ // Allocate memory for 'tetgenio'
+ if (nverts > 0) {
+ numberofpoints = nverts;
+ pointlist = new REAL[nverts * 3];
+ assert(pointlist != NULL);
+ }
+ if (nfaces > 0) {
+ numberoffacets = nfaces;
+ facetlist = new tetgenio::facet[nfaces];
+ assert(facetlist);
+ }
+ }
+ } else if (iverts < nverts) {
+ // Read vertex coordinates
+ coord = &pointlist[iverts * 3];
+ for (i = 0; i < 3; i++) {
+ if (*bufferp == '\0') {
+ printf("Syntax error reading vertex coords on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ coord[i] = (REAL) strtod(bufferp, &bufferp);
+ bufferp = findnextnumber(bufferp);
+ }
+ iverts++;
+ } else if (ifaces < nfaces) {
+ // Get next face
+ f = &facetlist[ifaces];
+ init(f);
+ // In .off format, each facet has one polygon, no hole.
+ f->numberofpolygons = 1;
+ f->polygonlist = new tetgenio::polygon[1];
+ p = &f->polygonlist[0];
+ init(p);
+ // Read the number of vertices, it should be greater than 0.
+ p->numberofvertices = (int) strtol(bufferp, &bufferp, 0);
+ if (p->numberofvertices == 0) {
+ printf("Syntax error reading polygon on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ // Allocate memory for face vertices
+ p->vertexlist = new int[p->numberofvertices];
+ for (i = 0; i < p->numberofvertices; i++) {
+ bufferp = findnextnumber(bufferp);
+ if (*bufferp == '\0') {
+ printf("Syntax error reading polygon on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ p->vertexlist[i] = (int) strtol(bufferp, &bufferp, 0);
+ }
+ ifaces++;
+ } else {
+ // Should never get here
+ printf("Found extra text starting at line %d in file %s\n", line_count,
+ infilename);
+ break;
+ }
+ }
+
+ // Close file
+ fclose(fp);
+
+ // Check whether read all points
+ if (iverts != nverts) {
+ printf("Expected %d vertices, but read only %d vertices in file %s\n",
+ nverts, iverts, infilename);
+ return false;
+ }
+
+ // Check whether read all faces
+ if (ifaces != nfaces) {
+ printf("Expected %d faces, but read only %d faces in file %s\n",
+ nfaces, ifaces, infilename);
+ return false;
+ }
+
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_ply() Load a polyhedron described in a .ply file. //
+// //
+// 'filename' is the file name with extension .ply or without extension (the //
+// .ply will be added in this case). //
+// //
+// This is a simplified version of reading .ply files, which only reads the //
+// set of vertices and the set of faces. Other informations (such as color, //
+// material, texture, etc) in .ply file are ignored. Complete routines for //
+// reading and writing ,ply files are available from: http://www.cc.gatech. //
+// edu/projects/large_models/ply.html. Except the header section, ply file //
+// format has exactly the same format for listing vertices and polygons as //
+// off file format. //
+// //
+// On completion, 'pointlist' and 'facetlist' together return the polyhedron.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_ply(char* filename)
+{
+ FILE *fp;
+ tetgenio::facet *f;
+ tetgenio::polygon *p;
+ char infilename[FILENAMESIZE];
+ char buffer[INPUTLINESIZE];
+ char *bufferp, *str;
+ double *coord;
+ int endheader = 0, format = 0;
+ int nverts = 0, iverts = 0;
+ int nfaces = 0, ifaces = 0;
+ int line_count = 0, i;
+
+ strncpy(infilename, filename, FILENAMESIZE - 1);
+ infilename[FILENAMESIZE - 1] = '\0';
+ if (infilename[0] == '\0') {
+ printf("Error: No filename.\n");
+ return false;
+ }
+ if (strcmp(&infilename[strlen(infilename) - 4], ".ply") != 0) {
+ strcat(infilename, ".ply");
+ }
+
+ if (!(fp = fopen(infilename, "r"))) {
+ printf("Error: Unable to open file %s\n", infilename);
+ return false;
+ }
+ printf("Opening %s.\n", infilename);
+
+ // PLY requires the index starts from '0'.
+ firstnumber = 0;
+
+ while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
+ if (!endheader) {
+ // Find if it is the keyword "end_header".
+ str = strstr(bufferp, "end_header");
+ // strstr() is case sensitive.
+ if (!str) str = strstr(bufferp, "End_header");
+ if (!str) str = strstr(bufferp, "End_Header");
+ if (str) {
+ // This is the end of the header section.
+ endheader = 1;
+ continue;
+ }
+ // Parse the number of vertices and the number of faces.
+ if (nverts == 0 || nfaces == 0) {
+ // Find if it si the keyword "element".
+ str = strstr(bufferp, "element");
+ if (!str) str = strstr(bufferp, "Element");
+ if (str) {
+ bufferp = findnextfield(str);
+ if (*bufferp == '\0') {
+ printf("Syntax error reading element type on line%d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ if (nverts == 0) {
+ // Find if it is the keyword "vertex".
+ str = strstr(bufferp, "vertex");
+ if (!str) str = strstr(bufferp, "Vertex");
+ if (str) {
+ bufferp = findnextnumber(str);
+ if (*bufferp == '\0') {
+ printf("Syntax error reading vertex number on line");
+ printf(" %d in file %s\n", line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ nverts = (int) strtol(bufferp, &bufferp, 0);
+ // Allocate memory for 'tetgenio'
+ if (nverts > 0) {
+ numberofpoints = nverts;
+ pointlist = new REAL[nverts * 3];
+ assert(pointlist != NULL);
+ }
+ }
+ }
+ if (nfaces == 0) {
+ // Find if it is the keyword "face".
+ str = strstr(bufferp, "face");
+ if (!str) str = strstr(bufferp, "Face");
+ if (str) {
+ bufferp = findnextnumber(str);
+ if (*bufferp == '\0') {
+ printf("Syntax error reading face number on line");
+ printf(" %d in file %s\n", line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ nfaces = (int) strtol(bufferp, &bufferp, 0);
+ // Allocate memory for 'tetgenio'
+ if (nfaces > 0) {
+ numberoffacets = nfaces;
+ facetlist = new tetgenio::facet[nfaces];
+ assert(facetlist);
+ }
+ }
+ }
+ } // It is not the string "element".
+ }
+ if (format == 0) {
+ // Find the keyword "format".
+ str = strstr(bufferp, "format");
+ if (!str) str = strstr(bufferp, "Format");
+ if (str) {
+ format = 1;
+ bufferp = findnextfield(str);
+ // Find if it is the string "ascii".
+ str = strstr(bufferp, "ascii");
+ if (!str) str = strstr(bufferp, "ASCII");
+ if (!str) {
+ printf("This routine only reads ascii format of ply files.\n");
+ printf("Hint: You can convert the binary to ascii format by\n");
+ printf(" using the provided ply tools:\n");
+ printf(" ply2ascii < %s > ascii_%s\n", infilename, infilename);
+ fclose(fp);
+ return false;
+ }
+ }
+ }
+ } else if (iverts < nverts) {
+ // Read vertex coordinates
+ coord = &pointlist[iverts * 3];
+ for (i = 0; i < 3; i++) {
+ if (*bufferp == '\0') {
+ printf("Syntax error reading vertex coords on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ coord[i] = (REAL) strtod(bufferp, &bufferp);
+ bufferp = findnextnumber(bufferp);
+ }
+ iverts++;
+ } else if (ifaces < nfaces) {
+ // Get next face
+ f = &facetlist[ifaces];
+ init(f);
+ // In .off format, each facet has one polygon, no hole.
+ f->numberofpolygons = 1;
+ f->polygonlist = new tetgenio::polygon[1];
+ p = &f->polygonlist[0];
+ init(p);
+ // Read the number of vertices, it should be greater than 0.
+ p->numberofvertices = (int) strtol(bufferp, &bufferp, 0);
+ if (p->numberofvertices == 0) {
+ printf("Syntax error reading polygon on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ // Allocate memory for face vertices
+ p->vertexlist = new int[p->numberofvertices];
+ for (i = 0; i < p->numberofvertices; i++) {
+ bufferp = findnextnumber(bufferp);
+ if (*bufferp == '\0') {
+ printf("Syntax error reading polygon on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ p->vertexlist[i] = (int) strtol(bufferp, &bufferp, 0);
+ }
+ ifaces++;
+ } else {
+ // Should never get here
+ printf("Found extra text starting at line %d in file %s\n", line_count,
+ infilename);
+ break;
+ }
+ }
+
+ // Close file
+ fclose(fp);
+
+ // Check whether read all points
+ if (iverts != nverts) {
+ printf("Expected %d vertices, but read only %d vertices in file %s\n",
+ nverts, iverts, infilename);
+ return false;
+ }
+
+ // Check whether read all faces
+ if (ifaces != nfaces) {
+ printf("Expected %d faces, but read only %d faces in file %s\n",
+ nfaces, ifaces, infilename);
+ return false;
+ }
+
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_stl() Load a surface mesh described in a .stl file. //
+// //
+// 'filename' is the file name with extension .stl or without extension (the //
+// .stl will be added in this case). //
+// //
+// The .stl or stereolithography format is an ASCII or binary file used in //
+// manufacturing. It is a list of the triangular surfaces that describe a //
+// computer generated solid model. This is the standard input for most rapid //
+// prototyping machines. //
+// //
+// On completion, 'pointlist' and 'facetlist' together return the polyhedron.//
+// Note: After load_stl(), there exist many duplicated points in 'pointlist'.//
+// They will be unified during the Delaunay tetrahedralization process. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_stl(char* filename)
+{
+ FILE *fp;
+ tetgenmesh::list *plist;
+ tetgenio::facet *f;
+ tetgenio::polygon *p;
+ char infilename[FILENAMESIZE];
+ char buffer[INPUTLINESIZE];
+ char *bufferp, *str;
+ double *coord;
+ int solid = 0;
+ int nverts = 0, iverts = 0;
+ int nfaces = 0;
+ int line_count = 0, i;
+
+ strncpy(infilename, filename, FILENAMESIZE - 1);
+ infilename[FILENAMESIZE - 1] = '\0';
+ if (infilename[0] == '\0') {
+ printf("Error: No filename.\n");
+ return false;
+ }
+ if (strcmp(&infilename[strlen(infilename) - 4], ".stl") != 0) {
+ strcat(infilename, ".stl");
+ }
+
+ if (!(fp = fopen(infilename, "r"))) {
+ printf("Error: Unable to open file %s\n", infilename);
+ return false;
+ }
+ printf("Opening %s.\n", infilename);
+
+ // STL file has no number of points available. Use a list to read points.
+ plist = new tetgenmesh::list(sizeof(double) * 3, NULL, 1024);
+
+ while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
+ // The ASCII .stl file must start with the lower case keyword solid and
+ // end with endsolid.
+ if (solid == 0) {
+ // Read header
+ bufferp = strstr(bufferp, "solid");
+ if (bufferp != NULL) {
+ solid = 1;
+ }
+ } else {
+ // We're inside the block of the solid.
+ str = bufferp;
+ // Is this the end of the solid.
+ bufferp = strstr(bufferp, "endsolid");
+ if (bufferp != NULL) {
+ solid = 0;
+ } else {
+ // Read the XYZ coordinates if it is a vertex.
+ bufferp = str;
+ bufferp = strstr(bufferp, "vertex");
+ if (bufferp != NULL) {
+ coord = (double *) plist->append(NULL);
+ for (i = 0; i < 3; i++) {
+ bufferp = findnextnumber(bufferp);
+ if (*bufferp == '\0') {
+ printf("Syntax error reading vertex coords on line %d\n",
+ line_count);
+ delete plist;
+ fclose(fp);
+ return false;
+ }
+ coord[i] = (REAL) strtod(bufferp, &bufferp);
+ }
+ }
+ }
+ }
+ }
+ fclose(fp);
+
+ nverts = plist->len();
+ // nverts should be an integer times 3 (every 3 vertices denote a face).
+ if (nverts == 0 || (nverts % 3 != 0)) {
+ printf("Error: Wrong number of vertices in file %s.\n", infilename);
+ delete plist;
+ return false;
+ }
+ numberofpoints = nverts;
+ pointlist = new REAL[nverts * 3];
+ assert(pointlist != NULL);
+ for (i = 0; i < nverts; i++) {
+ coord = (double *) (* plist)[i];
+ iverts = i * 3;
+ pointlist[iverts] = (REAL) coord[0];
+ pointlist[iverts + 1] = (REAL) coord[1];
+ pointlist[iverts + 2] = (REAL) coord[2];
+ }
+
+ nfaces = (int) (nverts / 3);
+ numberoffacets = nfaces;
+ facetlist = new tetgenio::facet[nfaces];
+ assert(facetlist != NULL);
+
+ // Default use '1' as the array starting index.
+ firstnumber = 1;
+ iverts = firstnumber;
+ for (i = 0; i < nfaces; i++) {
+ f = &facetlist[i];
+ init(f);
+ // In .stl format, each facet has one polygon, no hole.
+ f->numberofpolygons = 1;
+ f->polygonlist = new tetgenio::polygon[1];
+ p = &f->polygonlist[0];
+ init(p);
+ // Each polygon has three vertices.
+ p->numberofvertices = 3;
+ p->vertexlist = new int[p->numberofvertices];
+ p->vertexlist[0] = iverts;
+ p->vertexlist[1] = iverts + 1;
+ p->vertexlist[2] = iverts + 2;
+ iverts += 3;
+ }
+
+ delete plist;
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_medit() Load a surface mesh described in .mesh file. //
+// //
+// 'filename' is the file name with extension .mesh or without entension ( //
+// the .mesh will be added in this case). .mesh is the file format of Medit, //
+// a user-friendly interactive mesh viewing program. //
+// //
+// This routine ONLY reads the sections containing vertices and triangles, //
+// other sections (such as tetrahedra, edges, ...) are ignored. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_medit(char* filename)
+{
+ FILE *fp;
+ tetgenio::facet *f;
+ tetgenio::polygon *p;
+ char infilename[FILENAMESIZE];
+ char buffer[INPUTLINESIZE];
+ char *bufferp, *str;
+ double *coord;
+ int nverts = 0;
+ int nfaces = 0;
+ int line_count = 0;
+ int corners = 0; // 3 (triangle) or 4 (quad).
+ int i, j;
+
+ strncpy(infilename, filename, FILENAMESIZE - 1);
+ infilename[FILENAMESIZE - 1] = '\0';
+ if (infilename[0] == '\0') {
+ printf("Error: No filename.\n");
+ return false;
+ }
+ if (strcmp(&infilename[strlen(infilename) - 5], ".mesh") != 0) {
+ strcat(infilename, ".mesh");
+ }
+
+ if (!(fp = fopen(infilename, "r"))) {
+ printf("Error: Unable to open file %s\n", infilename);
+ return false;
+ }
+ printf("Opening %s.\n", infilename);
+
+ // Default uses the index starts from '1'.
+ firstnumber = 1;
+
+ while ((bufferp = readline(buffer, fp, &line_count)) != NULL) {
+ if (*bufferp == '#') continue; // A comment line is skipped.
+ if (nverts == 0) {
+ // Find if it is the keyword "Vertices".
+ str = strstr(bufferp, "Vertices");
+ if (!str) str = strstr(bufferp, "vertices");
+ if (!str) str = strstr(bufferp, "VERTICES");
+ if (str) {
+ // Read the number of vertices.
+ bufferp = findnextnumber(str); // Skip field "Vertices".
+ if (*bufferp == '\0') {
+ // Read a non-empty line.
+ bufferp = readline(buffer, fp, &line_count);
+ }
+ nverts = (int) strtol(bufferp, &bufferp, 0);
+ // Allocate memory for 'tetgenio'
+ if (nverts > 0) {
+ numberofpoints = nverts;
+ pointlist = new REAL[nverts * 3];
+ assert(pointlist != NULL);
+ }
+ // Read the follwoing node list.
+ for (i = 0; i < nverts; i++) {
+ bufferp = readline(buffer, fp, &line_count);
+ if (bufferp == NULL) {
+ printf("Unexpected end of file on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ // Read vertex coordinates
+ coord = &pointlist[i * 3];
+ for (j = 0; j < 3; j++) {
+ if (*bufferp == '\0') {
+ printf("Syntax error reading vertex coords on line");
+ printf(" %d in file %s\n", line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ coord[j] = (REAL) strtod(bufferp, &bufferp);
+ bufferp = findnextnumber(bufferp);
+ }
+ }
+ continue;
+ }
+ }
+ if (nfaces == 0) {
+ // Find if it is the keyword "Triangles" or "Quadrilaterals".
+ str = strstr(bufferp, "Triangles");
+ if (!str) str = strstr(bufferp, "triangles");
+ if (!str) str = strstr(bufferp, "TRIANGLES");
+ if (str) {
+ corners = 3;
+ } else {
+ str = strstr(bufferp, "Quadrilaterals");
+ if (!str) str = strstr(bufferp, "quadrilaterals");
+ if (!str) str = strstr(bufferp, "QUADRILATERALS");
+ if (str) {
+ corners = 4;
+ }
+ }
+ if (corners == 3 || corners == 4) {
+ // Read the number of triangles (or quadrilaterals).
+ bufferp = findnextnumber(str); // Skip field "Triangles".
+ if (*bufferp == '\0') {
+ // Read a non-empty line.
+ bufferp = readline(buffer, fp, &line_count);
+ }
+ nfaces = strtol(bufferp, &bufferp, 0);
+ // Allocate memory for 'tetgenio'
+ if (nfaces > 0) {
+ numberoffacets = nfaces;
+ facetlist = new tetgenio::facet[nfaces];
+ assert(facetlist != NULL);
+ facetmarkerlist = new int[nfaces];
+ assert(facetmarkerlist != NULL);
+ }
+ // Read the following list of faces.
+ for (i = 0; i < nfaces; i++) {
+ bufferp = readline(buffer, fp, &line_count);
+ if (bufferp == NULL) {
+ printf("Unexpected end of file on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ f = &facetlist[i];
+ tetgenio::init(f);
+ // In .mesh format, each facet has one polygon, no hole.
+ f->numberofpolygons = 1;
+ f->polygonlist = new tetgenio::polygon[1];
+ p = &f->polygonlist[0];
+ tetgenio::init(p);
+ p->numberofvertices = corners;
+ // Allocate memory for face vertices
+ p->vertexlist = new int[p->numberofvertices];
+ assert(p->vertexlist != NULL);
+ // Read the vertices of the face.
+ for (j = 0; j < corners; j++) {
+ if (*bufferp == '\0') {
+ printf("Syntax error reading face on line %d in file %s\n",
+ line_count, infilename);
+ fclose(fp);
+ return false;
+ }
+ p->vertexlist[j] = (int) strtol(bufferp, &bufferp, 0);
+ if (firstnumber == 1) {
+ // Check if a '0' index appears.
+ if (p->vertexlist[j] == 0) {
+ // The first index is set to be 0.
+ firstnumber = 0;
+ }
+ }
+ bufferp = findnextnumber(bufferp);
+ }
+ // Read the marker of the face if it exists.
+ facetmarkerlist[i] = 0;
+ if (*bufferp != '\0') {
+ facetmarkerlist[i] = (int) strtol(bufferp, &bufferp, 0);
+ }
+ }
+ continue;
+ }
+ }
+ if (nverts > 0 && nfaces > 0) break; // Ignore other data.
+ }
+
+ // Close file
+ fclose(fp);
+
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_plc() Load a piecewise linear complex from file. //
+// //
+// This is main entrance for loading plcs from different file formats into //
+// tetgenio. 'filename' is the input file name without extention. 'object' //
+// indicates which file format is used to describ the plc. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_plc(char* filename, int object)
+{
+ enum tetgenbehavior::objecttype type;
+
+ type = (enum tetgenbehavior::objecttype) object;
+ switch (type) {
+ case tetgenbehavior::NODES:
+ return load_node(filename);
+ case tetgenbehavior::POLY:
+ return load_poly(filename);
+ case tetgenbehavior::OFF:
+ return load_off(filename);
+ case tetgenbehavior::PLY:
+ return load_ply(filename);
+ case tetgenbehavior::STL:
+ return load_stl(filename);
+ case tetgenbehavior::MEDIT:
+ return load_medit(filename);
+ default:
+ return load_poly(filename);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// load_tetmesh() Load a tetrahedral mesh from files. //
+// //
+// 'filename' is the inputfile without suffix. The nodes of the tetrahedral //
+// mesh is in "filename.node", the elements is in "filename.ele", if the //
+// "filename.face" and "filename.vol" exists, they will also be read. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenio::load_tetmesh(char* filename)
+{
+ FILE *infile;
+ char innodefilename[FILENAMESIZE];
+ char inelefilename[FILENAMESIZE];
+ char infacefilename[FILENAMESIZE];
+ char inedgefilename[FILENAMESIZE];
+ char involfilename[FILENAMESIZE];
+ char inputline[INPUTLINESIZE];
+ char *stringptr, *infilename;
+ REAL attrib, volume;
+ int volelements;
+ int markers, corner;
+ int index, attribindex;
+ int i, j;
+
+ // Assembling the actual file names we want to open.
+ strcpy(innodefilename, filename);
+ strcpy(inelefilename, filename);
+ strcpy(infacefilename, filename);
+ strcpy(inedgefilename, filename);
+ strcpy(involfilename, filename);
+ strcat(innodefilename, ".node");
+ strcat(inelefilename, ".ele");
+ strcat(infacefilename, ".face");
+ strcat(inedgefilename, ".edge");
+ strcat(involfilename, ".vol");
+
+ // Read the points from a .node file.
+ infilename = innodefilename;
+ printf("Opening %s.\n", infilename);
+ infile = fopen(infilename, "r");
+ if (infile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot access file %s.\n", infilename);
+ return false;
+ }
+ // Read number of points, number of dimensions, number of point
+ // attributes, and number of boundary markers.
+ stringptr = readnumberline(inputline, infile, infilename);
+ numberofpoints = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ mesh_dim = 3;
+ } else {
+ mesh_dim = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ numberofpointattributes = 0;
+ } else {
+ numberofpointattributes = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ markers = 0; // Default value.
+ } else {
+ markers = (int) strtol (stringptr, &stringptr, 0);
+ }
+
+ if (mesh_dim != 3) {
+ printf("Error: load_tetmesh() only works for 3D points.\n");
+ fclose(infile);
+ return false;
+ }
+ if (numberofpoints < 4) {
+ printf("File I/O error: Input should has at least 4 points.\n");
+ fclose(infile);
+ return false;
+ }
+
+ // Load the list of nodes.
+ if (!load_node_call(infile, markers, infilename)) {
+ fclose(infile);
+ return false;
+ }
+
+ // Read the elements from a .ele file.
+ infilename = inelefilename;
+ printf("Opening %s.\n", infilename);
+ infile = fopen(infilename, "r");
+ if (infile != (FILE *) NULL) {
+ // Read number of elements, number of corners (4 or 10), number of
+ // element attributes.
+ stringptr = readnumberline(inputline, infile, infilename);
+ numberoftetrahedra = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ numberofcorners = 4; // Default read 4 nodes per element.
+ } else {
+ numberofcorners = (int) strtol (stringptr, &stringptr, 0);
+ }
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ numberoftetrahedronattributes = 0; // Default no attribute.
+ } else {
+ numberoftetrahedronattributes = (int) strtol (stringptr, &stringptr, 0);
+ }
+ if (numberofcorners != 4 && numberofcorners != 10) {
+ printf("Error: Wrong number of corners %d (should be 4 or 10).\n",
+ numberofcorners);
+ fclose(infile);
+ return false;
+ }
+ // Allocate memory for tetrahedra.
+ if (numberoftetrahedra > 0) {
+ tetrahedronlist = new int[numberoftetrahedra * numberofcorners];
+ if (tetrahedronlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ // Allocate memory for output tetrahedron attributes if necessary.
+ if (numberoftetrahedronattributes > 0) {
+ tetrahedronattributelist = new REAL[numberoftetrahedra *
+ numberoftetrahedronattributes];
+ if (tetrahedronattributelist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ }
+ // Read the list of tetrahedra.
+ index = 0;
+ attribindex = 0;
+ for (i = 0; i < numberoftetrahedra; i++) {
+ // Read tetrahedron index and the tetrahedron's corners.
+ stringptr = readnumberline(inputline, infile, infilename);
+ for (j = 0; j < numberofcorners; j++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Tetrahedron %d is missing vertex %d in %s.\n",
+ i + firstnumber, j + 1, infilename);
+ exit(1);
+ }
+ corner = (int) strtol(stringptr, &stringptr, 0);
+ if (corner < firstnumber || corner >= numberofpoints + firstnumber) {
+ printf("Error: Tetrahedron %d has an invalid vertex index.\n",
+ i + firstnumber);
+ exit(1);
+ }
+ tetrahedronlist[index++] = corner;
+ }
+ // Read the tetrahedron's attributes.
+ for (j = 0; j < numberoftetrahedronattributes; j++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ attrib = 0.0;
+ } else {
+ attrib = (REAL) strtod(stringptr, &stringptr);
+ }
+ tetrahedronattributelist[attribindex++] = attrib;
+ }
+ }
+ fclose(infile);
+ }
+
+ // Read the hullfaces or subfaces from a .face file if it exists.
+ infilename = infacefilename;
+ infile = fopen(infilename, "r");
+ if (infile != (FILE *) NULL) {
+ printf("Opening %s.\n", infilename);
+ // Read number of faces, boundary markers.
+ stringptr = readnumberline(inputline, infile, infilename);
+ numberoftrifaces = (int) strtol (stringptr, &stringptr, 0);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ markers = 0; // Default there is no marker per face.
+ } else {
+ markers = (int) strtol (stringptr, &stringptr, 0);
+ }
+ if (numberoftrifaces > 0) {
+ trifacelist = new int[numberoftrifaces * 3];
+ if (trifacelist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ if (markers) {
+ trifacemarkerlist = new int[numberoftrifaces * 3];
+ if (trifacemarkerlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ }
+ // Read the list of faces.
+ index = 0;
+ for (i = 0; i < numberoftrifaces; i++) {
+ // Read face index and the face's three corners.
+ stringptr = readnumberline(inputline, infile, infilename);
+ for (j = 0; j < 3; j++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Face %d is missing vertex %d in %s.\n",
+ i + firstnumber, j + 1, infilename);
+ exit(1);
+ }
+ corner = (int) strtol(stringptr, &stringptr, 0);
+ if (corner < firstnumber || corner >= numberofpoints + firstnumber) {
+ printf("Error: Face %d has an invalid vertex index.\n",
+ i + firstnumber);
+ exit(1);
+ }
+ trifacelist[index++] = corner;
+ }
+ // Read the boundary marker if it exists.
+ if (markers) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ attrib = 0.0;
+ } else {
+ attrib = (REAL) strtod(stringptr, &stringptr);
+ }
+ trifacemarkerlist[i] = (int) attrib;
+ }
+ }
+ fclose(infile);
+ }
+
+ // Read the boundary edges from a .edge file if it exists.
+ infilename = inedgefilename;
+ infile = fopen(infilename, "r");
+ if (infile != (FILE *) NULL) {
+ printf("Opening %s.\n", infilename);
+ // Read number of boundary edges.
+ stringptr = readnumberline(inputline, infile, infilename);
+ numberofedges = (int) strtol (stringptr, &stringptr, 0);
+ if (numberofedges > 0) {
+ edgelist = new int[numberofedges * 2];
+ if (edgelist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ // Read the list of faces.
+ index = 0;
+ for (i = 0; i < numberofedges; i++) {
+ // Read face index and the edge's two endpoints.
+ stringptr = readnumberline(inputline, infile, infilename);
+ for (j = 0; j < 2; j++) {
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ printf("Error: Edge %d is missing vertex %d in %s.\n",
+ i + firstnumber, j + 1, infilename);
+ exit(1);
+ }
+ corner = (int) strtol(stringptr, &stringptr, 0);
+ if (corner < firstnumber || corner >= numberofpoints + firstnumber) {
+ printf("Error: Edge %d has an invalid vertex index.\n",
+ i + firstnumber);
+ exit(1);
+ }
+ edgelist[index++] = corner;
+ }
+ }
+ fclose(infile);
+ }
+
+ // Read the volume constraints from a .vol file if it exists.
+ infilename = involfilename;
+ infile = fopen(infilename, "r");
+ if (infile != (FILE *) NULL) {
+ printf("Opening %s.\n", infilename);
+ // Read number of tetrahedra.
+ stringptr = readnumberline(inputline, infile, infilename);
+ volelements = (int) strtol (stringptr, &stringptr, 0);
+ if (volelements != numberoftetrahedra) {
+ printf("Warning: %s and %s disagree on number of tetrahedra.\n",
+ inelefilename, involfilename);
+ volelements = 0;
+ }
+ if (volelements > 0) {
+ tetrahedronvolumelist = new REAL[volelements];
+ if (tetrahedronvolumelist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ // Read the list of volume constraints.
+ for (i = 0; i < volelements; i++) {
+ stringptr = readnumberline(inputline, infile, infilename);
+ stringptr = findnextnumber(stringptr);
+ if (*stringptr == '\0') {
+ volume = -1.0; // No constraint on this tetrahedron.
+ } else {
+ volume = (REAL) strtod(stringptr, &stringptr);
+ }
+ tetrahedronvolumelist[i] = volume;
+ }
+ fclose(infile);
+ }
+
+ // Try to read a .pbc file if it exists.
+ load_pbc(filename);
+
+ // Try to load a .cons file if it exists.
+ load_var(filename);
+
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// save_nodes() Save points to a .node file. //
+// //
+// 'filename' is a string containing the file name without suffix. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::save_nodes(char* filename)
+{
+ FILE *fout;
+ char outnodefilename[FILENAMESIZE];
+ int i, j;
+
+ sprintf(outnodefilename, "%s.node", filename);
+ printf("Saving nodes to %s\n", outnodefilename);
+ fout = fopen(outnodefilename, "w");
+ fprintf(fout, "%d %d %d %d\n", numberofpoints, mesh_dim,
+ numberofpointattributes, pointmarkerlist != NULL ? 1 : 0);
+ for (i = 0; i < numberofpoints; i++) {
+ if (mesh_dim == 2) {
+ fprintf(fout, "%d %.16g %.16g", i + firstnumber, pointlist[i * 2],
+ pointlist[i * 2 + 1]);
+ } else {
+ fprintf(fout, "%d %.16g %.16g %.16g", i + firstnumber,
+ pointlist[i * 3], pointlist[i * 3 + 1], pointlist[i * 3 + 2]);
+ }
+ for (j = 0; j < numberofpointattributes; j++) {
+ fprintf(fout, " %.16g",
+ pointattributelist[i * numberofpointattributes+j]);
+ }
+ if (pointmarkerlist != NULL) {
+ fprintf(fout, " %d", pointmarkerlist[i]);
+ }
+ fprintf(fout, "\n");
+ }
+
+ fclose(fout);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// save_elements() Save elements to a .ele file. //
+// //
+// 'filename' is a string containing the file name without suffix. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::save_elements(char* filename)
+{
+ FILE *fout;
+ char outelefilename[FILENAMESIZE];
+ int i, j;
+
+ sprintf(outelefilename, "%s.ele", filename);
+ printf("Saving elements to %s\n", outelefilename);
+ fout = fopen(outelefilename, "w");
+ fprintf(fout, "%d %d %d\n", numberoftetrahedra, numberofcorners,
+ numberoftetrahedronattributes);
+ for (i = 0; i < numberoftetrahedra; i++) {
+ fprintf(fout, "%d", i + firstnumber);
+ for (j = 0; j < numberofcorners; j++) {
+ fprintf(fout, " %5d", tetrahedronlist[i * numberofcorners + j]);
+ }
+ for (j = 0; j < numberoftetrahedronattributes; j++) {
+ fprintf(fout, " %g",
+ tetrahedronattributelist[i * numberoftetrahedronattributes + j]);
+ }
+ fprintf(fout, "\n");
+ }
+
+ fclose(fout);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// save_faces() Save faces to a .face file. //
+// //
+// 'filename' is a string containing the file name without suffix. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::save_faces(char* filename)
+{
+ FILE *fout;
+ char outfacefilename[FILENAMESIZE];
+ int i;
+
+ sprintf(outfacefilename, "%s.face", filename);
+ printf("Saving faces to %s\n", outfacefilename);
+ fout = fopen(outfacefilename, "w");
+ fprintf(fout, "%d %d\n", numberoftrifaces,
+ trifacemarkerlist != NULL ? 1 : 0);
+ for (i = 0; i < numberoftrifaces; i++) {
+ fprintf(fout, "%d %5d %5d %5d", i + firstnumber, trifacelist[i * 3],
+ trifacelist[i * 3 + 1], trifacelist[i * 3 +2]);
+ if (trifacemarkerlist != NULL) {
+ fprintf(fout, " %d", trifacemarkerlist[i]);
+ }
+ fprintf(fout, "\n");
+ }
+
+ fclose(fout);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// save_edges() Save egdes to a .edge file. //
+// //
+// 'filename' is a string containing the file name without suffix. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::save_edges(char* filename)
+{
+ FILE *fout;
+ char outedgefilename[FILENAMESIZE];
+ int i;
+
+ sprintf(outedgefilename, "%s.edge", filename);
+ printf("Saving edges to %s\n", outedgefilename);
+ fout = fopen(outedgefilename, "w");
+ fprintf(fout, "%d %d\n", numberofedges, edgemarkerlist != NULL ? 1 : 0);
+ for (i = 0; i < numberofedges; i++) {
+ fprintf(fout, "%d %4d %4d", i + firstnumber, edgelist[i * 2],
+ edgelist[i * 2 + 1]);
+ if (edgemarkerlist != NULL) {
+ fprintf(fout, " %d", edgemarkerlist[i]);
+ }
+ fprintf(fout, "\n");
+ }
+
+ fclose(fout);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// save_neighbors() Save egdes to a .neigh file. //
+// //
+// 'filename' is a string containing the file name without suffix. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::save_neighbors(char* filename)
+{
+ FILE *fout;
+ char outneighborfilename[FILENAMESIZE];
+ int i;
+
+ sprintf(outneighborfilename, "%s.neigh", filename);
+ printf("Saving neighbors to %s\n", outneighborfilename);
+ fout = fopen(outneighborfilename, "w");
+ fprintf(fout, "%d %d\n", numberoftetrahedra, mesh_dim + 1);
+ for (i = 0; i < numberoftetrahedra; i++) {
+ if (mesh_dim == 2) {
+ fprintf(fout, "%d %5d %5d %5d", i + firstnumber, neighborlist[i * 3],
+ neighborlist[i * 3 + 1], neighborlist[i * 3 + 2]);
+ } else {
+ fprintf(fout, "%d %5d %5d %5d %5d", i + firstnumber,
+ neighborlist[i * 4], neighborlist[i * 4 + 1],
+ neighborlist[i * 4 + 2], neighborlist[i * 4 + 3]);
+ }
+ fprintf(fout, "\n");
+ }
+
+ fclose(fout);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// save_poly() Save segments or facets to a .poly file. //
+// //
+// 'filename' is a string containing the file name without suffix. It only //
+// save the facets, holes and regions. The nodes are saved in a .node file //
+// by routine save_nodes(). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenio::save_poly(char* filename)
+{
+ FILE *fout;
+ facet *f;
+ polygon *p;
+ char outpolyfilename[FILENAMESIZE];
+ int i, j, k;
+
+ sprintf(outpolyfilename, "%s.poly", filename);
+ printf("Saving poly to %s\n", outpolyfilename);
+ fout = fopen(outpolyfilename, "w");
+
+ // The zero indicates that the vertices are in a separate .node file.
+ // Followed by number of dimensions, number of vertex attributes,
+ // and number of boundary markers (zero or one).
+ fprintf(fout, "%d %d %d %d\n", 0, mesh_dim, numberofpointattributes,
+ pointmarkerlist != NULL ? 1 : 0);
+
+ // Save segments or facets.
+ if (mesh_dim == 2) {
+ // Number of segments, number of boundary markers (zero or one).
+ fprintf(fout, "%d %d\n", numberofedges, edgemarkerlist != NULL ? 1 : 0);
+ for (i = 0; i < numberofedges; i++) {
+ fprintf(fout, "%d %4d %4d", i + firstnumber, edgelist[i * 2],
+ edgelist[i * 2 + 1]);
+ if (edgemarkerlist != NULL) {
+ fprintf(fout, " %d", edgemarkerlist[i]);
+ }
+ fprintf(fout, "\n");
+ }
+ } else {
+ // Number of facets, number of boundary markers (zero or one).
+ fprintf(fout, "%d %d\n", numberoffacets, facetmarkerlist != NULL ? 1 : 0);
+ for (i = 0; i < numberoffacets; i++) {
+ f = &(facetlist[i]);
+ fprintf(fout, "%d %d %d # %d\n", f->numberofpolygons,f->numberofholes,
+ facetmarkerlist != NULL ? facetmarkerlist[i] : 0, i + firstnumber);
+ // Output polygons of this facet.
+ for (j = 0; j < f->numberofpolygons; j++) {
+ p = &(f->polygonlist[j]);
+ fprintf(fout, "%d ", p->numberofvertices);
+ for (k = 0; k < p->numberofvertices; k++) {
+ if (((k + 1) % 10) == 0) {
+ fprintf(fout, "\n ");
+ }
+ fprintf(fout, " %d", p->vertexlist[k]);
+ }
+ fprintf(fout, "\n");
+ }
+ // Output holes of this facet.
+ for (j = 0; j < f->numberofholes; j++) {
+ fprintf(fout, "%d %.12g %.12g %.12g\n", j + firstnumber,
+ f->holelist[j * 3], f->holelist[j * 3 + 1], f->holelist[j * 3 + 2]);
+ }
+ }
+ }
+
+ // Save holes.
+ fprintf(fout, "%d\n", numberofholes);
+ for (i = 0; i < numberofholes; i++) {
+ // Output x, y coordinates.
+ fprintf(fout, "%d %.12g %.12g", i + firstnumber, holelist[i * mesh_dim],
+ holelist[i * mesh_dim + 1]);
+ if (mesh_dim == 3) {
+ // Output z coordinate.
+ fprintf(fout, " %.12g", holelist[i * mesh_dim + 2]);
+ }
+ fprintf(fout, "\n");
+ }
+
+ // Save regions.
+ fprintf(fout, "%d\n", numberofregions);
+ for (i = 0; i < numberofregions; i++) {
+ if (mesh_dim == 2) {
+ // Output the index, x, y coordinates, attribute (region number)
+ // and maximum area constraint (maybe -1).
+ fprintf(fout, "%d %.12g %.12g %.12g %.12g\n", i + firstnumber,
+ regionlist[i * 4], regionlist[i * 4 + 1],
+ regionlist[i * 4 + 2], regionlist[i * 4 + 3]);
+ } else {
+ // Output the index, x, y, z coordinates, attribute (region number)
+ // and maximum volume constraint (maybe -1).
+ fprintf(fout, "%d %.12g %.12g %.12g %.12g %.12g\n", i + firstnumber,
+ regionlist[i * 5], regionlist[i * 5 + 1],
+ regionlist[i * 5 + 2], regionlist[i * 5 + 3],
+ regionlist[i * 5 + 4]);
+ }
+ }
+
+ fclose(fout);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// readline() Read a nonempty line from a file. //
+// //
+// A line is considered "nonempty" if it contains something more than white //
+// spaces. If a line is considered empty, it will be dropped and the next //
+// line will be read, this process ends until reaching the end-of-file or a //
+// non-empty line. Return NULL if it is the end-of-file, otherwise, return //
+// a pointer to the first non-whitespace character of the line. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+char* tetgenio::readline(char *string, FILE *infile, int *linenumber)
+{
+ char *result;
+
+ // Search for a non-empty line.
+ do {
+ result = fgets(string, INPUTLINESIZE - 1, infile);
+ if (linenumber) (*linenumber)++;
+ if (result == (char *) NULL) {
+ return (char *) NULL;
+ }
+ // Skip white spaces.
+ while ((*result == ' ') || (*result == '\t')) result++;
+ // If it's end of line, read another line and try again.
+ } while (*result == '\0');
+ return result;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// findnextfield() Find the next field of a string. //
+// //
+// Jumps past the current field by searching for whitespace or a comma, then //
+// jumps past the whitespace or the comma to find the next field. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+char* tetgenio::findnextfield(char *string)
+{
+ char *result;
+
+ result = string;
+ // Skip the current field. Stop upon reaching whitespace or a comma.
+ while ((*result != '\0') && (*result != ' ') && (*result != '\t') &&
+ (*result != ',') && (*result != ';')) {
+ result++;
+ }
+ // Now skip the whitespace or the comma, stop at anything else that looks
+ // like a character, or the end of a line.
+ while ((*result == ' ') || (*result == '\t') || (*result == ',') ||
+ (*result == ';')) {
+ result++;
+ }
+ return result;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// readnumberline() Read a nonempty number line from a file. //
+// //
+// A line is considered "nonempty" if it contains something that looks like //
+// a number. Comments (prefaced by `#') are ignored. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+char* tetgenio::readnumberline(char *string, FILE *infile, char *infilename)
+{
+ char *result;
+
+ // Search for something that looks like a number.
+ do {
+ result = fgets(string, INPUTLINESIZE, infile);
+ if (result == (char *) NULL) {
+ if (infilename != (char *) NULL) {
+ printf(" Error: Unexpected end of file in %s.\n", infilename);
+ exit(1);
+ }
+ return result;
+ }
+ // Skip anything that doesn't look like a number, a comment,
+ // or the end of a line.
+ while ((*result != '\0') && (*result != '#')
+ && (*result != '.') && (*result != '+') && (*result != '-')
+ && ((*result < '0') || (*result > '9'))) {
+ result++;
+ }
+ // If it's a comment or end of line, read another line and try again.
+ } while ((*result == '#') || (*result == '\0'));
+ return result;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// findnextnumber() Find the next field of a number string. //
+// //
+// Jumps past the current field by searching for whitespace or a comma, then //
+// jumps past the whitespace or the comma to find the next field that looks //
+// like a number. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+char* tetgenio::findnextnumber(char *string)
+{
+ char *result;
+
+ result = string;
+ // Skip the current field. Stop upon reaching whitespace or a comma.
+ while ((*result != '\0') && (*result != '#') && (*result != ' ') &&
+ (*result != '\t') && (*result != ',')) {
+ result++;
+ }
+ // Now skip the whitespace and anything else that doesn't look like a
+ // number, a comment, or the end of a line.
+ while ((*result != '\0') && (*result != '#')
+ && (*result != '.') && (*result != '+') && (*result != '-')
+ && ((*result < '0') || (*result > '9'))) {
+ result++;
+ }
+ // Check for a comment (prefixed with `#').
+ if (*result == '#') {
+ *result = '\0';
+ }
+ return result;
+}
+
+//
+// End of class 'tetgenio' implementation
+//
+
+static REAL PI = 3.14159265358979323846264338327950288419716939937510582;
+
+//
+// Begin of class 'tetgenbehavior' implementation
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetgenbehavior() Initialize veriables of 'tetgenbehavior'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenbehavior::tetgenbehavior()
+{
+ // Initialize command line switches.
+ plc = 0;
+ refine = 0;
+ quality = 0;
+ minratio = 2.0;
+ goodratio = 0.0;
+ minangle = 20.0;
+ goodangle = 0.0;
+ varvolume = 0;
+ fixedvolume = 0;
+ maxvolume = -1.0;
+ regionattrib = 0;
+ insertaddpoints = 0;
+ detectinter = 0;
+ zeroindex = 0;
+ facesout = 0;
+ edgesout = 0;
+ neighout = 0;
+ meditview = 0;
+ gidview = 0;
+ geomview = 0;
+ order = 1;
+ nobound = 0;
+ nonodewritten = 0;
+ noelewritten = 0;
+ nofacewritten = 0;
+ noiterationnum = 0;
+ nobisect = 0;
+ noflip = 0;
+ steiner = -1;
+ dofullperturb = 0;
+ dopermute = 0;
+ srandseed = 1;
+ nomerge = 0;
+ docheck = 0;
+ quiet = 0;
+ verbose = 0;
+ useshelles = 0;
+ epsilon = 1.0e-8;
+ object = NONE;
+ // Initialize strings
+ commandline[0] = '\0';
+ infilename[0] = '\0';
+ outfilename[0] = '\0';
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// versioninfo() Print the version information of TetGen. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenbehavior::versioninfo()
+{
+ printf("Version 1.3.4 (Released on June 13, 2005).\n");
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// syntax() Print list of command line switches and exit the program. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenbehavior::syntax()
+{
+ printf(" tetgen [-pq__a__AriMS__T__dzjo_fengGOBNEFICQVvh] input_file\n");
+ printf(" -p Tetrahedralizes a piecewise linear complex.\n");
+ printf(" -q Quality mesh generation. A minimum radius-edge ratio may\n");
+ printf(" be specified (default 2.0).\n");
+ printf(" -a Applies a maximum tetrahedron volume constraint.\n");
+ printf(" -A Assigns attributes to identify tetrahedra in certain ");
+ printf("regions.\n");
+ printf(" -r Reconstructs and Refines a previously generated mesh.\n");
+ printf(" -i Inserts a list of additional points into mesh.\n");
+ printf(" -M Does not merge coplanar facets.\n");
+ printf(" -S Specifies maximum number of added Steiner points.\n");
+ printf(" -T Set a tolerance for coplanar test (default 1e-8).\n");
+ printf(" -d Detect intersections of PLC facets.\n");
+ printf(" -z Numbers all output items starting from zero.\n");
+ printf(" -o2 Generates second-order subparametric elements.\n");
+ printf(" -f Outputs faces (including non-boundary faces) to .face ");
+ printf("file.\n");
+ printf(" -e Outputs subsegments to .edge file.\n");
+ printf(" -n Outputs tetrahedra neighbors to .neigh file.\n");
+ printf(" -g Outputs mesh to .mesh file for viewing by Medit.\n");
+ printf(" -G Outputs mesh to .msh file for viewing by Gid.\n");
+ printf(" -O Outputs mesh to .off file for viewing by Geomview.\n");
+ printf(" -B Suppresses output of boundary information.\n");
+ printf(" -N Suppresses output of .node file.\n");
+ printf(" -E Suppresses output of .ele file.\n");
+ printf(" -F Suppresses output of .face file.\n");
+ printf(" -I Suppresses mesh iteration numbers.\n");
+ printf(" -C Checks the consistency of the final mesh.\n");
+ printf(" -Q Quiet: No terminal output except errors.\n");
+ printf(" -V Verbose: Detailed information, more terminal output.\n");
+ printf(" -v Prints the version information.\n");
+ printf(" -h Help: A brief instruction for using TetGen.\n");
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// usage() Print a brief instruction for using TetGen. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenbehavior::usage()
+{
+ printf("TetGen\n");
+ printf("A Quality Tetrahedral Mesh Generator and 3D Delaunay ");
+ printf("Triangulator\n");
+ versioninfo();
+ printf("\n");
+ printf("Copyright 2002, 2004, 2005\n");
+ printf("Hang Si\n");
+ printf("Rathausstr. 9, 10178 Berlin, Germany\n");
+ printf("si@wias-berlin.de\n");
+ printf("\n");
+ printf("What Can TetGen Do?\n");
+ printf("\n");
+ printf(" TetGen generates exact Delaunay tetrahedralizations, exact\n");
+ printf(" constrained Delaunay tetrahedralizations, and quality ");
+ printf("tetrahedral\n meshes. The latter are nicely graded and whose ");
+ printf("tetrahedra have\n radius-edge ratio bounded, thus are suitable ");
+ printf("for finite element and\n finite volume analysis.\n");
+ printf("\n");
+ printf("Command Line Syntax:\n");
+ printf("\n");
+ printf(" Below is the command line syntax of TetGen with a list of ");
+ printf("short\n");
+ printf(" descriptions. Underscores indicate that numbers may optionally\n");
+ printf(" follow certain switches. Do not leave any space between a ");
+ printf("switch\n");
+ printf(" and its numeric parameter. \'input_file\' contains input data\n");
+ printf(" depending on the switches you supplied which may be a ");
+ printf(" piecewise\n");
+ printf(" linear complex or a list of nodes. File formats and detailed\n");
+ printf(" description of command line switches are found in user's ");
+ printf("manual.\n");
+ printf("\n");
+ syntax();
+ printf("\n");
+ printf("Examples of How to Use TetGen:\n");
+ printf("\n");
+ printf(" \'tetgen object\' reads vertices from object.node, and writes ");
+ printf("their\n Delaunay tetrahedralization to object.1.node and ");
+ printf("object.1.ele.\n");
+ printf("\n");
+ printf(" \'tetgen -p object\' reads a PLC from object.poly or object.");
+ printf("smesh (and\n possibly object.node) and writes its constrained ");
+ printf("Delaunay\n tetrahedralization to object.1.node, object.1.ele and ");
+ printf("object.1.face.\n");
+ printf("\n");
+ printf(" \'tetgen -pq1.414a.1 object\' reads a PLC from object.poly or\n");
+ printf(" object.smesh (and possibly object.node), generates a mesh ");
+ printf("whose\n tetrahedra have radius-edge ratio smaller than 1.414 and ");
+ printf("have volume\n of 0.1 or less, and writes the mesh to ");
+ printf("object.1.node, object.1.ele\n and object.1.face.\n");
+ printf("\n");
+ printf("Please send bugs/comments to Hang Si <si@wias-berlin.de>\n");
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// parse_commandline() Read the command line, identify switches, and set //
+// up options and file names. //
+// //
+// 'argc' and 'argv' are the same parameters passed to the function main() //
+// of a C/C++ program. They together represent the command line user invoked //
+// from an environment in which TetGen is running. //
+// //
+// When TetGen is invoked from an environment. 'argc' is nonzero, switches //
+// and input filename should be supplied as zero-terminated strings in //
+// argv[0] through argv[argc - 1] and argv[0] shall be the name used to //
+// invoke TetGen, i.e. "tetgen". Switches are previously started with a //
+// dash '-' to identify them from the input filename. //
+// //
+// When TetGen is called from within another program. 'argc' is set to zero. //
+// switches are given in one zero-terminated string (no previous dash is //
+// required.), and 'argv' is a pointer points to this string. No input //
+// filename is required (usually the input data has been directly created by //
+// user in the 'tetgenio' structure). A default filename 'tetgen-tmpfile' //
+// will be created for debugging output purpose. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenbehavior::parse_commandline(int argc, char **argv)
+{
+ int startindex;
+ int increment;
+ int meshnumber;
+ int i, j, k;
+ char workstring[1024];
+
+ // First determine the input style of the switches.
+ if (argc == 0) {
+ startindex = 0; // Switches are given without a dash.
+ argc = 1; // For running the following for-loop once.
+ commandline[0] = '\0';
+ } else {
+ startindex = 1;
+ strcpy(commandline, argv[0]);
+ strcat(commandline, " ");
+ }
+
+ for (i = startindex; i < argc; i++) {
+ // Remember the command line switches.
+ strcat(commandline, argv[i]);
+ strcat(commandline, " ");
+ if (startindex == 1) {
+ // Is this string a filename?
+ if (argv[i][0] != '-') {
+ strncpy(infilename, argv[i], 1024 - 1);
+ infilename[1024 - 1] = '\0';
+ // Go to the next string directly.
+ continue;
+ }
+ }
+ // Parse the individual switch from the string.
+ for (j = startindex; argv[i][j] != '\0'; j++) {
+ if (argv[i][j] == 'p') {
+ plc = 1;
+ } else if (argv[i][j] == 'r') {
+ refine = 1;
+ } else if (argv[i][j] == 'q') {
+ quality = 1;
+ if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.')) {
+ k = 0;
+ while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.')) {
+ j++;
+ workstring[k] = argv[i][j];
+ k++;
+ }
+ workstring[k] = '\0';
+ minratio = (REAL) strtod(workstring, (char **) NULL);
+ }
+ } else if (argv[i][j] == 'a') {
+ quality = 1;
+ if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.')) {
+ fixedvolume = 1;
+ k = 0;
+ while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
+ (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
+ j++;
+ workstring[k] = argv[i][j];
+ k++;
+ }
+ workstring[k] = '\0';
+ maxvolume = (REAL) strtod(workstring, (char **) NULL);
+ } else {
+ varvolume = 1;
+ }
+ } else if (argv[i][j] == 'A') {
+ regionattrib = 1;
+ } else if (argv[i][j] == 'i') {
+ insertaddpoints = 1;
+ } else if (argv[i][j] == 'd') {
+ detectinter = 1;
+ } else if (argv[i][j] == 'z') {
+ zeroindex = 1;
+ } else if (argv[i][j] == 'f') {
+ facesout = 1;
+ } else if (argv[i][j] == 'e') {
+ edgesout = 1;
+ } else if (argv[i][j] == 'n') {
+ neighout = 1;
+ } else if (argv[i][j] == 'g') {
+ meditview = 1;
+ } else if (argv[i][j] == 'G') {
+ gidview = 1;
+ } else if (argv[i][j] == 'O') {
+ geomview = 1;
+ } else if (argv[i][j] == 'B') {
+ nobound = 1;
+ } else if (argv[i][j] == 'N') {
+ nonodewritten = 1;
+ } else if (argv[i][j] == 'E') {
+ noelewritten = 1;
+ } else if (argv[i][j] == 'F') {
+ nofacewritten = 1;
+ } else if (argv[i][j] == 'I') {
+ noiterationnum = 1;
+ } else if (argv[i][j] == 'o') {
+ if (argv[i][j + 1] == '2') {
+ j++;
+ order = 2;
+ }
+ } else if (argv[i][j] == 'Y') {
+ noflip = 1; // nobisect++;
+ } else if (argv[i][j] == 'S') {
+ if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.')) {
+ k = 0;
+ while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
+ (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
+ j++;
+ workstring[k] = argv[i][j];
+ k++;
+ }
+ workstring[k] = '\0';
+ steiner = (int) strtol(workstring, (char **) NULL, 0);
+ }
+ } else if (argv[i][j] == 'P') {
+ dofullperturb = 1;
+ /*
+ dopermute = 1;
+ if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.')) {
+ k = 0;
+ while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
+ (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
+ j++;
+ workstring[k] = argv[i][j];
+ k++;
+ }
+ workstring[k] = '\0';
+ srandseed = (int) strtol(workstring, (char **) NULL, 0);
+ }
+ */
+ } else if (argv[i][j] == 'M') {
+ nomerge = 1;
+ } else if (argv[i][j] == 'T') {
+ if (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.')) {
+ k = 0;
+ while (((argv[i][j + 1] >= '0') && (argv[i][j + 1] <= '9')) ||
+ (argv[i][j + 1] == '.') || (argv[i][j + 1] == 'e') ||
+ (argv[i][j + 1] == '-') || (argv[i][j + 1] == '+')) {
+ j++;
+ workstring[k] = argv[i][j];
+ k++;
+ }
+ workstring[k] = '\0';
+ epsilon = (REAL) strtod(workstring, (char **) NULL);
+ }
+ } else if (argv[i][j] == 'C') {
+ docheck++;
+ } else if (argv[i][j] == 'Q') {
+ quiet = 1;
+ } else if (argv[i][j] == 'V') {
+ verbose++;
+ } else if (argv[i][j] == 'v') {
+ versioninfo();
+ exit(0);
+ } else if ((argv[i][j] == 'h') || (argv[i][j] == 'H') ||
+ (argv[i][j] == '?')) {
+ usage();
+ exit(0);
+ } else {
+ printf("Warning: Unknown switch -%c.\n", argv[i][j]);
+ }
+ }
+ }
+
+ if (startindex == 0) {
+ // Set a temporary filename for debugging output.
+ strcpy(infilename, "tetgen-tmpfile");
+ } else {
+ if (infilename[0] == '\0') {
+ // No input file name. Print the syntax and exit.
+ syntax();
+ exit(0);
+ }
+ // Recognize the object from file extension if it is available.
+ if (!strcmp(&infilename[strlen(infilename) - 5], ".node")) {
+ infilename[strlen(infilename) - 5] = '\0';
+ object = NODES;
+ } else if (!strcmp(&infilename[strlen(infilename) - 5], ".poly")) {
+ infilename[strlen(infilename) - 5] = '\0';
+ object = POLY;
+ plc = 1;
+ } else if (!strcmp(&infilename[strlen(infilename) - 6], ".smesh")) {
+ infilename[strlen(infilename) - 6] = '\0';
+ object = POLY;
+ plc = 1;
+ } else if (!strcmp(&infilename[strlen(infilename) - 4], ".off")) {
+ infilename[strlen(infilename) - 4] = '\0';
+ object = OFF;
+ plc = 1;
+ } else if (!strcmp(&infilename[strlen(infilename) - 4], ".ply")) {
+ infilename[strlen(infilename) - 4] = '\0';
+ object = PLY;
+ plc = 1;
+ } else if (!strcmp(&infilename[strlen(infilename) - 4], ".stl")) {
+ infilename[strlen(infilename) - 4] = '\0';
+ object = STL;
+ plc = 1;
+ } else if (!strcmp(&infilename[strlen(infilename) - 5], ".mesh")) {
+ infilename[strlen(infilename) - 5] = '\0';
+ object = MEDIT;
+ plc = 1;
+ } else if (!strcmp(&infilename[strlen(infilename) - 4], ".ele")) {
+ infilename[strlen(infilename) - 4] = '\0';
+ object = MESH;
+ refine = 1;
+ }
+ }
+ plc = plc || detectinter;
+ useshelles = plc || refine || quality;
+ goodratio = minratio;
+ goodratio *= goodratio;
+
+ // Detect improper combinations of switches.
+ if (plc && refine) {
+ printf("Error: Switch -r cannot use together with -p.\n");
+ return false;
+ }
+ if (refine && (plc || noiterationnum)) {
+ printf("Error: Switches %s cannot use together with -r.\n",
+ "-p, -d, -c, and -I");
+ return false;
+ }
+ if (detectinter && (quality || insertaddpoints || (order == 2) || neighout
+ || docheck)) {
+ printf("Error: Switches %s cannot use together with -d.\n",
+ "-q, -i, -o2, -n, and -C");
+ return false;
+ }
+
+ // Be careful not to allocate space for element area constraints that
+ // will never be assigned any value (other than the default -1.0).
+ if (!refine && !plc) {
+ varvolume = 0;
+ }
+ // Be careful not to add an extra attribute to each element unless the
+ // input supports it (PLC in, but not refining a preexisting mesh).
+ if (refine || !plc) {
+ regionattrib = 0;
+ }
+ // Calculate the goodangle for testing bad subfaces.
+ goodangle = cos(minangle * PI / 180.0);
+ goodangle *= goodangle;
+
+ increment = 0;
+ strcpy(workstring, infilename);
+ j = 1;
+ while (workstring[j] != '\0') {
+ if ((workstring[j] == '.') && (workstring[j + 1] != '\0')) {
+ increment = j + 1;
+ }
+ j++;
+ }
+ meshnumber = 0;
+ if (increment > 0) {
+ j = increment;
+ do {
+ if ((workstring[j] >= '0') && (workstring[j] <= '9')) {
+ meshnumber = meshnumber * 10 + (int) (workstring[j] - '0');
+ } else {
+ increment = 0;
+ }
+ j++;
+ } while (workstring[j] != '\0');
+ }
+ if (noiterationnum) {
+ strcpy(outfilename, infilename);
+ } else if (increment == 0) {
+ strcpy(outfilename, infilename);
+ strcat(outfilename, ".1");
+ } else {
+ workstring[increment] = '%';
+ workstring[increment + 1] = 'd';
+ workstring[increment + 2] = '\0';
+ sprintf(outfilename, workstring, meshnumber + 1);
+ }
+
+ return true;
+}
+
+//
+// End of class 'tetgenbehavior' implementation
+//
+
+//
+// Begin of class 'tetgenmesh' implementation
+//
+
+//
+// Begin of class 'list', 'memorypool' and 'link' implementation
+//
+
+// Following are predefined compare functions for primitive data types.
+// These functions take two pointers of the corresponding date type,
+// perform the comparation. Return -1, 0 or 1 indicating the default
+// linear order of two operators.
+
+// Compare two 'integers'.
+int tetgenmesh::compare_2_ints(const void* x, const void* y) {
+ if (* (int *) x < * (int *) y) {
+ return -1;
+ } else if (* (int *) x > * (int *) y) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+// Compare two 'longs'. Note: in 64-bit machine the 'long' type is 64-bit
+// (8-byte) where the 'int' only 32-bit (4-byte).
+int tetgenmesh::compare_2_longs(const void* x, const void* y) {
+ if (* (long *) x < * (long *) y) {
+ return -1;
+ } else if (* (long *) x > * (long *) y) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+// Compare two 'unsigned longs'.
+int tetgenmesh::compare_2_unsignedlongs(const void* x, const void* y) {
+ if (* (unsigned long *) x < * (unsigned long *) y) {
+ return -1;
+ } else if (* (unsigned long *) x > * (unsigned long *) y) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// set_compfunc() Determine the size of primitive data types and set the //
+// corresponding predefined linear order functions. //
+// //
+// 'str' is a zero-end string indicating a primitive data type, like 'int', //
+// 'long' or 'unsigned long'. Every string ending with a '*' is though as a //
+// type of pointer and the type 'unsign long' is used for it. //
+// //
+// When the type of 'str' is determined, the size of this type (in byte) is //
+// returned in 'itbytes', and the pointer of corresponding predefined linear //
+// order functions is returned in 'pcomp'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::set_compfunc(char* str, int* itbytes, compfunc* pcomp)
+{
+ // First figure out whether it is a pointer or not.
+ if (str[strlen(str) - 1] == '*') {
+ *itbytes = sizeof(unsigned long);
+ *pcomp = &compare_2_unsignedlongs;
+ return;
+ }
+ // Then determine other types.
+ if (strcmp(str, "int") == 0) {
+ *itbytes = sizeof(int);
+ *pcomp = &compare_2_ints;
+ } else if (strcmp(str, "long") == 0) {
+ *itbytes = sizeof(long);
+ *pcomp = &compare_2_longs;
+ } else if (strcmp(str, "unsigned long") == 0) {
+ *itbytes = sizeof(unsigned long);
+ *pcomp = &compare_2_unsignedlongs;
+ } else {
+ // It is an unknown type.
+ printf("Error in set_compfunc(): unknown type %s.\n", str);
+ exit(1);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// listinit() Initialize a list for storing a data type. //
+// //
+// Determine the size of each item, set the maximum size allocated at onece, //
+// set the expand size in case the list is full, and set the linear order //
+// function if it is provided (default is NULL). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::list::
+listinit(int itbytes, compfunc pcomp, int mitems,int exsize)
+{
+ assert(itbytes > 0 && mitems > 0 && exsize > 0);
+
+ itembytes = itbytes;
+ comp = pcomp;
+ maxitems = mitems;
+ expandsize = exsize;
+ base = (char *) malloc(maxitems * itembytes);
+ if (base == (char *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ items = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// append() Add a new item at the end of the list. //
+// //
+// A new space at the end of this list will be allocated for storing the new //
+// item. If the memory is not sufficient, reallocation will be performed. If //
+// 'appitem' is not NULL, the contents of this pointer will be copied to the //
+// new allocated space. Returns the pointer to the new allocated space. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::list::append(void *appitem)
+{
+ // Do we have enough space?
+ if (items == maxitems) {
+ char* newbase = (char *) realloc(base, (maxitems + expandsize) *
+ itembytes);
+ if (newbase == (char *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ base = newbase;
+ maxitems += expandsize;
+ }
+ if (appitem != (void *) NULL) {
+ memcpy(base + items * itembytes, appitem, itembytes);
+ }
+ items++;
+ return (void *) (base + (items - 1) * itembytes);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insert() Insert an item before 'pos' (range from 0 to items - 1). //
+// //
+// A new space will be inserted at the position 'pos', that is, items lie //
+// after pos (including the item at pos) will be moved one space downwords. //
+// If 'insitem' is not NULL, its contents will be copied into the new //
+// inserted space. Return a pointer to the new inserted space. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::list::insert(int pos, void* insitem)
+{
+ if (pos >= items) {
+ return append(insitem);
+ }
+ // Do we have enough space.
+ if (items == maxitems) {
+ char* newbase = (char *) realloc(base, (maxitems + expandsize) *
+ itembytes);
+ if (newbase == (char *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ base = newbase;
+ maxitems += expandsize;
+ }
+ // Do block move.
+ memmove(base + (pos + 1) * itembytes, // dest
+ base + pos * itembytes, // src
+ (items - pos) * itembytes); // size in bytes
+ // Insert the item.
+ if (insitem != (void *) NULL) {
+ memcpy(base + pos * itembytes, insitem, itembytes);
+ }
+ items++;
+ return (void *) (base + pos * itembytes);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// del() Delete an item at 'pos' (range from 0 to items - 1). //
+// //
+// The space at 'pos' will be overlapped by other items, that is, items lie //
+// after pos will be moved one space upwords. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::list::del(int pos)
+{
+ // If 'pos' is the last itemof the list, nothing need to do.
+ if (pos >= 0 && pos < items - 1) {
+ // Do block move.
+ memmove(base + pos * itembytes, // dest
+ base + (pos + 1) * itembytes, // src
+ (items - pos - 1) * itembytes);
+ }
+ if (items > 0) {
+ items--;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// hasitem() Search in this list to find if 'checkitem' exists. //
+// //
+// This routine assumes that a linear order function has been set. It loops //
+// through the entire list, compares each item to 'checkitem'. If it exists, //
+// return its position (between 0 to items - 1), otherwise, return -1. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+int tetgenmesh::list::hasitem(void* checkitem)
+{
+ int i;
+
+ for (i = 0; i < items; i++) {
+ if (comp != (compfunc) NULL) {
+ if ((* comp)((void *)(base + i * itembytes), checkitem) == 0) {
+ return i;
+ }
+ }
+ }
+ return -1;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// remove() Remove an item (indicated by its pointer) from the list. //
+// //
+// If the list contains more than one copy of the pointer, only the first //
+// copy is removed. The returned value is the index of the removed item. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+int tetgenmesh::list::remove(void* remitem)
+{
+ int pos = hasitem(remitem);
+ if (pos != -1) {
+ del(pos);
+ }
+ return pos;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// sort() Sort the items with respect to a linear order function. //
+// //
+// Uses QuickSort routines (qsort) of the standard C/C++ library (stdlib.h). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::list::sort()
+{
+ qsort((void *) base, (size_t) items, (size_t) itembytes, comp);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// memorypool() The constructors of memorypool. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::memorypool::memorypool()
+{
+ firstblock = nowblock = (void **) NULL;
+ nextitem = (void *) NULL;
+ deaditemstack = (void *) NULL;
+ pathblock = (void **) NULL;
+ pathitem = (void *) NULL;
+ itemwordtype = POINTER;
+ alignbytes = 0;
+ itembytes = itemwords = 0;
+ itemsperblock = 0;
+ items = maxitems = 0l;
+ unallocateditems = 0;
+ pathitemsleft = 0;
+}
+
+tetgenmesh::memorypool::
+memorypool(int bytecount, int itemcount, enum wordtype wtype, int alignment)
+{
+ poolinit(bytecount, itemcount, wtype, alignment);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// ~memorypool() Free to the operating system all memory taken by a pool. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::memorypool::~memorypool()
+{
+ while (firstblock != (void **) NULL) {
+ nowblock = (void **) *(firstblock);
+ free(firstblock);
+ firstblock = nowblock;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// poolinit() Initialize a pool of memory for allocation of items. //
+// //
+// A `pool' is created whose records have size at least `bytecount'. Items //
+// will be allocated in `itemcount'-item blocks. Each item is assumed to be //
+// a collection of words, and either pointers or floating-point values are //
+// assumed to be the "primary" word type. (The "primary" word type is used //
+// to determine alignment of items.) If `alignment' isn't zero, all items //
+// will be `alignment'-byte aligned in memory. `alignment' must be either a //
+// multiple or a factor of the primary word size; powers of two are safe. //
+// `alignment' is normally used to create a few unused bits at the bottom of //
+// each item's pointer, in which information may be stored. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::memorypool::
+poolinit(int bytecount, int itemcount, enum wordtype wtype, int alignment)
+{
+ int wordsize;
+
+ // Initialize values in the pool.
+ itemwordtype = wtype;
+ wordsize = (itemwordtype == POINTER) ? sizeof(void *) : sizeof(REAL);
+ // Find the proper alignment, which must be at least as large as:
+ // - The parameter `alignment'.
+ // - The primary word type, to avoid unaligned accesses.
+ // - sizeof(void *), so the stack of dead items can be maintained
+ // without unaligned accesses.
+ if (alignment > wordsize) {
+ alignbytes = alignment;
+ } else {
+ alignbytes = wordsize;
+ }
+ if (sizeof(void *) > alignbytes) {
+ alignbytes = sizeof(void *);
+ }
+ itemwords = ((bytecount + alignbytes - 1) / alignbytes)
+ * (alignbytes / wordsize);
+ itembytes = itemwords * wordsize;
+ itemsperblock = itemcount;
+
+ // Allocate a block of items. Space for `itemsperblock' items and one
+ // pointer (to point to the next block) are allocated, as well as space
+ // to ensure alignment of the items.
+ firstblock = (void **) malloc(itemsperblock * itembytes + sizeof(void *)
+ + alignbytes);
+ if (firstblock == (void **) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ // Set the next block pointer to NULL.
+ *(firstblock) = (void *) NULL;
+ restart();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// restart() Deallocate all items in this pool. //
+// //
+// The pool is returned to its starting state, except that no memory is //
+// freed to the operating system. Rather, the previously allocated blocks //
+// are ready to be reused. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::memorypool::restart()
+{
+ unsigned long alignptr;
+
+ items = 0;
+ maxitems = 0;
+
+ // Set the currently active block.
+ nowblock = firstblock;
+ // Find the first item in the pool. Increment by the size of (void *).
+ alignptr = (unsigned long) (nowblock + 1);
+ // Align the item on an `alignbytes'-byte boundary.
+ nextitem = (void *)
+ (alignptr + (unsigned long) alignbytes -
+ (alignptr % (unsigned long) alignbytes));
+ // There are lots of unallocated items left in this block.
+ unallocateditems = itemsperblock;
+ // The stack of deallocated items is empty.
+ deaditemstack = (void *) NULL;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// alloc() Allocate space for an item. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::memorypool::alloc()
+{
+ void *newitem;
+ void **newblock;
+ unsigned long alignptr;
+
+ // First check the linked list of dead items. If the list is not
+ // empty, allocate an item from the list rather than a fresh one.
+ if (deaditemstack != (void *) NULL) {
+ newitem = deaditemstack; // Take first item in list.
+ deaditemstack = * (void **) deaditemstack;
+ } else {
+ // Check if there are any free items left in the current block.
+ if (unallocateditems == 0) {
+ // Check if another block must be allocated.
+ if (*nowblock == (void *) NULL) {
+ // Allocate a new block of items, pointed to by the previous block.
+ newblock = (void **) malloc(itemsperblock * itembytes + sizeof(void *)
+ + alignbytes);
+ if (newblock == (void **) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ *nowblock = (void *) newblock;
+ // The next block pointer is NULL.
+ *newblock = (void *) NULL;
+ }
+ // Move to the new block.
+ nowblock = (void **) *nowblock;
+ // Find the first item in the block.
+ // Increment by the size of (void *).
+ alignptr = (unsigned long) (nowblock + 1);
+ // Align the item on an `alignbytes'-byte boundary.
+ nextitem = (void *)
+ (alignptr + (unsigned long) alignbytes -
+ (alignptr % (unsigned long) alignbytes));
+ // There are lots of unallocated items left in this block.
+ unallocateditems = itemsperblock;
+ }
+ // Allocate a new item.
+ newitem = nextitem;
+ // Advance `nextitem' pointer to next free item in block.
+ if (itemwordtype == POINTER) {
+ nextitem = (void *) ((void **) nextitem + itemwords);
+ } else {
+ nextitem = (void *) ((REAL *) nextitem + itemwords);
+ }
+ unallocateditems--;
+ maxitems++;
+ }
+ items++;
+ return newitem;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// dealloc() Deallocate space for an item. //
+// //
+// The deallocated space is stored in a queue for later reuse. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::memorypool::dealloc(void *dyingitem)
+{
+ // Push freshly killed item onto stack.
+ *((void **) dyingitem) = deaditemstack;
+ deaditemstack = dyingitem;
+ items--;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// traversalinit() Prepare to traverse the entire list of items. //
+// //
+// This routine is used in conjunction with traverse(). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::memorypool::traversalinit()
+{
+ unsigned long alignptr;
+
+ // Begin the traversal in the first block.
+ pathblock = firstblock;
+ // Find the first item in the block. Increment by the size of (void *).
+ alignptr = (unsigned long) (pathblock + 1);
+ // Align with item on an `alignbytes'-byte boundary.
+ pathitem = (void *)
+ (alignptr + (unsigned long) alignbytes -
+ (alignptr % (unsigned long) alignbytes));
+ // Set the number of items left in the current block.
+ pathitemsleft = itemsperblock;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// traverse() Find the next item in the list. //
+// //
+// This routine is used in conjunction with traversalinit(). Be forewarned //
+// that this routine successively returns all items in the list, including //
+// deallocated ones on the deaditemqueue. It's up to you to figure out which //
+// ones are actually dead. It can usually be done more space-efficiently by //
+// a routine that knows something about the structure of the item. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::memorypool::traverse()
+{
+ void *newitem;
+ unsigned long alignptr;
+
+ // Stop upon exhausting the list of items.
+ if (pathitem == nextitem) {
+ return (void *) NULL;
+ }
+ // Check whether any untraversed items remain in the current block.
+ if (pathitemsleft == 0) {
+ // Find the next block.
+ pathblock = (void **) *pathblock;
+ // Find the first item in the block. Increment by the size of (void *).
+ alignptr = (unsigned long) (pathblock + 1);
+ // Align with item on an `alignbytes'-byte boundary.
+ pathitem = (void *)
+ (alignptr + (unsigned long) alignbytes -
+ (alignptr % (unsigned long) alignbytes));
+ // Set the number of items left in the current block.
+ pathitemsleft = itemsperblock;
+ }
+ newitem = pathitem;
+ // Find the next item in the block.
+ if (itemwordtype == POINTER) {
+ pathitem = (void *) ((void **) pathitem + itemwords);
+ } else {
+ pathitem = (void *) ((REAL *) pathitem + itemwords);
+ }
+ pathitemsleft--;
+ return newitem;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// linkinit() Initialize a link for storing items. //
+// //
+// The input parameters are the size of each item, a pointer of a linear //
+// order function and the number of items allocating in one memory bulk. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::link::linkinit(int bytecount, compfunc pcomp, int itemcount)
+{
+ assert(bytecount > 0 && itemcount > 0);
+
+ // Remember the real size of each item.
+ linkitembytes = bytecount;
+ // Set the linear order function for this link.
+ comp = pcomp;
+
+ // Call the constructor of 'memorypool' to initialize its variables.
+ // like: itembytes, itemwords, items, ... Each node has size
+ // bytecount + 2 * sizeof(void **), and total 'itemcount + 2' (because
+ // link has additional two nodes 'head' and 'tail').
+ poolinit(bytecount + 2 * sizeof(void **), itemcount + 2, POINTER, 0);
+
+ // Initial state of this link.
+ head = (void **) alloc();
+ tail = (void **) alloc();
+ *head = (void *) tail;
+ *(head + 1) = NULL;
+ *tail = NULL;
+ *(tail + 1) = (void *) head;
+ nextlinkitem = *head;
+ curpos = 1;
+ linkitems = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// clear() Deallocate all nodes in this link. //
+// //
+// The link is returned to its starting state, except that no memory is //
+// freed to the operating system. Rather, the previously allocated blocks //
+// are ready to be reused. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::link::clear()
+{
+ // Reset the pool.
+ restart();
+
+ // Initial state of this link.
+ head = (void **) alloc();
+ tail = (void **) alloc();
+ *head = (void *) tail;
+ *(head + 1) = NULL;
+ *tail = NULL;
+ *(tail + 1) = (void *) head;
+ nextlinkitem = *head;
+ curpos = 1;
+ linkitems = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// move() Causes 'nextlinkitem' to traverse the specified number of nodes,//
+// updates 'curpos' to be the node to which 'nextlinkitem' points. //
+// //
+// 'numberofnodes' is a number indicating how many nodes need be traversed //
+// (not counter the current node) need be traversed. It may be positive(move //
+// forward) or negative (move backward). Return TRUE if it is successful. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::link::move(int numberofnodes)
+{
+ void **nownode;
+ int i;
+
+ nownode = (void **) nextlinkitem;
+ if (numberofnodes > 0) {
+ // Move forward.
+ i = 0;
+ while ((i < numberofnodes) && *nownode) {
+ nownode = (void **) *nownode;
+ i++;
+ }
+ if (*nownode == NULL) return false;
+ nextlinkitem = (void *) nownode;
+ curpos += numberofnodes;
+ } else if (numberofnodes < 0) {
+ // Move backward.
+ i = 0;
+ numberofnodes = -numberofnodes;
+ while ((i < numberofnodes) && *(nownode + 1)) {
+ nownode = (void **) *(nownode + 1);
+ i++;
+ }
+ if (*(nownode + 1) == NULL) return false;
+ nextlinkitem = (void *) nownode;
+ curpos -= numberofnodes;
+ }
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// locate() Locates the node at the specified position. //
+// //
+// The number 'pos' (between 1 and 'linkitems') indicates the location. This //
+// routine first decides the shortest path traversing from 'curpos' to 'pos',//
+// i.e., from head, tail or 'curpos'. Routine 'move()' is called to really //
+// traverse the link. If success, 'nextlinkitem' points to the node, 'curpos'//
+// and 'pos' are equal. Otherwise, return FALSE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::link::locate(int pos)
+{
+ int headdist, taildist, curdist;
+ int abscurdist, mindist;
+
+ if (pos < 1 || pos > linkitems) return false;
+
+ headdist = pos - 1;
+ taildist = linkitems - pos;
+ curdist = pos - curpos;
+ abscurdist = curdist >= 0 ? curdist : -curdist;
+
+ if (headdist > taildist) {
+ if (taildist > abscurdist) {
+ mindist = curdist;
+ } else {
+ // taildist <= abs(curdist)
+ mindist = -taildist;
+ goend();
+ }
+ } else {
+ // headdist <= taildist
+ if (headdist > abscurdist) {
+ mindist = curdist;
+ } else {
+ // headdist <= abs(curdist)
+ mindist = headdist;
+ rewind();
+ }
+ }
+
+ return move(mindist);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// add() Add a node at the end of this link. //
+// //
+// A new node is appended to the end of the link. If 'newitem' is not NULL, //
+// its conents will be copied to the data slot of the new node. Returns the //
+// pointer to the newest added node. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::link::add(void* newitem)
+{
+ void **newnode = tail;
+ if (newitem != (void *) NULL) {
+ memcpy((void *)(newnode + 2), newitem, linkitembytes);
+ }
+ tail = (void **) alloc();
+ *tail = NULL;
+ *newnode = (void*) tail;
+ *(tail + 1) = (void*) newnode;
+ linkitems++;
+ return (void *)(newnode + 2);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insert() Inserts a node before the specified position. //
+// //
+// 'pos' (between 1 and 'linkitems') indicates the inserting position. This //
+// routine inserts a new node before the node of 'pos'. If 'newitem' is not //
+// NULL, its conents will be copied into the data slot of the new node. If //
+// 'pos' is larger than 'linkitems', it is equal as 'add()'. A pointer to //
+// the newest inserted item is returned. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::link::insert(int pos, void* insitem)
+{
+ if (!locate(pos)) {
+ return add(insitem);
+ }
+
+ void **nownode = (void **) nextlinkitem;
+
+ // Insert a node before 'nownode'.
+ void **newnode = (void **) alloc();
+ if (insitem != (void *) NULL) {
+ memcpy((void *)(newnode + 2), insitem, linkitembytes);
+ }
+
+ *(void **)(*(nownode + 1)) = (void *) newnode;
+ *newnode = (void *) nownode;
+ *(newnode + 1) = *(nownode + 1);
+ *(nownode + 1) = (void *) newnode;
+
+ linkitems++;
+
+ nextlinkitem = (void *) newnode;
+ return (void *)(newnode + 2);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// del() Delete a node containing the given pointer. //
+// //
+// Returns a pointer of the deleted data. If you try to delete a non-existed //
+// node (e.g. link is empty or a wrong index is given) return NULL. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::link::del(void* delitem)
+{
+ void **deadnode = (void **) ((void **) delitem - 2);
+
+ // now delete the nownode
+ void **nextnode = (void **) *deadnode;
+ void **prevnode = (void **) *(deadnode + 1);
+ *prevnode = (void *) nextnode;
+ *(nextnode + 1) = (void *) prevnode;
+
+ dealloc((void *) deadnode);
+ linkitems--;
+
+ nextlinkitem = (void *) nextnode;
+ return (void *)(deadnode + 2);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// del() Delete a node at the specified position. //
+// //
+// 'pos' between 1 and 'linkitems'. Returns a pointer of the deleted data. //
+// If you try to delete a non-existed node (e.g. link is empty or a wrong //
+// index is given) return NULL. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::link::del(int pos)
+{
+ if (!locate(pos) || (linkitems == 0)) {
+ return (void *) NULL;
+ }
+ return del((void *) ((void **) nextlinkitem + 2));
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getitem() The link traversal routine. //
+// //
+// Returns the node to which 'nextlinkitem' points. Returns a 'NULL' if the //
+// end of the link is reaching. Both 'nextlinkitem' and 'curpos' will be //
+// updated after this operation. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::link::getitem()
+{
+ if (nextlinkitem == (void *) tail) return NULL;
+ void **nownode = (void **) nextlinkitem;
+ nextlinkitem = *nownode;
+ curpos += 1;
+ return (void *)(nownode + 2);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getnitem() Returns the node at a specified position. //
+// //
+// 'pos' between 1 and 'linkitems'. After this operation, 'nextlinkitem' and //
+// 'curpos' will be updated to indicate this node. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void* tetgenmesh::link::getnitem(int pos)
+{
+ if (!locate(pos)) return NULL;
+ return (void *)((void **) nextlinkitem + 2);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// hasitem() Search in this link to find if 'checkitem' exists. //
+// //
+// If 'checkitem' exists, return its position (between 1 to 'linkitems'), //
+// otherwise, return -1. This routine requires the linear order function has //
+// been set. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+int tetgenmesh::link::hasitem(void* checkitem)
+{
+ void *pathitem;
+ int count;
+
+ rewind();
+ pathitem = getitem();
+ count = 0;
+ while (pathitem) {
+ count ++;
+ if (comp) {
+ if ((* comp)(pathitem, checkitem) == 0) {
+ return count;
+ }
+ }
+ pathitem = getitem();
+ }
+ return -1;
+}
+
+//
+// End of class 'list', 'memorypool' and 'link' implementation
+//
+
+//
+// Begin of mesh manipulation primitives
+//
+
+//
+// Begin of tables initialization.
+//
+
+// For enumerating three edges of a triangle.
+
+int tetgenmesh::plus1mod3[3] = {1, 2, 0};
+int tetgenmesh::minus1mod3[3] = {2, 0, 1};
+
+// Table 've' takes an edge version as input, returns the next edge version
+// in the same edge ring.
+
+int tetgenmesh::ve[6] = { 2, 5, 4, 1, 0, 3 };
+
+// Tables 'vo', 'vd' and 'va' take an edge version, return the positions of
+// the origin, destination and apex in the triangle.
+
+int tetgenmesh::vo[6] = { 0, 1, 1, 2, 2, 0 };
+int tetgenmesh::vd[6] = { 1, 0, 2, 1, 0, 2 };
+int tetgenmesh::va[6] = { 2, 2, 0, 0, 1, 1 };
+
+// The following tables are for tetrahedron primitives (operate on trifaces).
+
+// For 'org()', 'dest()' and 'apex()'. Use 'loc' as the first index and
+// 'ver' as the second index.
+
+int tetgenmesh::locver2org[4][6] = {
+ 0, 1, 1, 2, 2, 0,
+ 0, 3, 3, 1, 1, 0,
+ 1, 3, 3, 2, 2, 1,
+ 2, 3, 3, 0, 0, 2
+};
+int tetgenmesh::locver2dest[4][6] = {
+ 1, 0, 2, 1, 0, 2,
+ 3, 0, 1, 3, 0, 1,
+ 3, 1, 2, 3, 1, 2,
+ 3, 2, 0, 3, 2, 0
+};
+int tetgenmesh::locver2apex[4][6] = {
+ 2, 2, 0, 0, 1, 1,
+ 1, 1, 0, 0, 3, 3,
+ 2, 2, 1, 1, 3, 3,
+ 0, 0, 2, 2, 3, 3
+};
+
+// For oppo() primitives, use 'loc' as the index.
+
+int tetgenmesh::loc2oppo[4] = { 3, 2, 0, 1 };
+
+// For fnext() primitive. Use 'loc' as the first index and 'ver' as the
+// second index. Returns a new 'loc' and new 'ver' in an array. (It is
+// only valid for edge version equals one of {0, 2, 4}.)
+
+int tetgenmesh::locver2nextf[4][6][2] = {
+ { {1, 5}, {-1, -1}, {2, 5}, {-1, -1}, {3, 5}, {-1, -1} },
+ { {3, 3}, {-1, -1}, {2, 1}, {-1, -1}, {0, 1}, {-1, -1} },
+ { {1, 3}, {-1, -1}, {3, 1}, {-1, -1}, {0, 3}, {-1, -1} },
+ { {2, 3}, {-1, -1}, {1, 1}, {-1, -1}, {0, 5}, {-1, -1} }
+};
+
+//
+// End of tables initialization.
+//
+
+// Some macros for convenience
+
+#define Div2 >> 1
+#define Mod2 & 01
+
+// NOTE: These bit operators should only be used in macros below.
+
+// Get orient(Range from 0 to 2) from face version(Range from 0 to 5).
+
+#define Orient(V) ((V) Div2)
+
+// Determine edge ring(0 or 1) from face version(Range from 0 to 5).
+
+#define EdgeRing(V) ((V) Mod2)
+
+//
+// Begin of primitives for tetrahedra
+//
+
+// Each tetrahedron contains four pointers to its neighboring tetrahedra,
+// with face indices. To save memory, both information are kept in a
+// single pointer. To make this possible, all tetrahedra are aligned to
+// eight-byte boundaries, so that the last three bits of each pointer are
+// zeros. A face index (in the range 0 to 3) is compressed into the last
+// two bits of each pointer by the function 'encode()'. The function
+// 'decode()' decodes a pointer, extracting a face index and a pointer to
+// the beginning of a tetrahedron.
+
+inline void tetgenmesh::decode(tetrahedron ptr, triface& t) {
+ t.loc = (int) ((unsigned long) (ptr) & (unsigned long) 3l);
+ t.tet = (tetrahedron *) ((unsigned long) (ptr) & ~(unsigned long) 7l);
+}
+
+inline tetgenmesh::tetrahedron tetgenmesh::encode(triface& t) {
+ return (tetrahedron) ((unsigned long) t.tet | (unsigned long) t.loc);
+}
+
+// sym() finds the abutting tetrahedron on the same face.
+
+inline void tetgenmesh::sym(triface& t1, triface& t2) {
+ tetrahedron ptr = t1.tet[t1.loc];
+ decode(ptr, t2);
+}
+
+inline void tetgenmesh::symself(triface& t) {
+ tetrahedron ptr = t.tet[t.loc];
+ decode(ptr, t);
+}
+
+// Bond two tetrahedra together at their faces.
+
+inline void tetgenmesh::bond(triface& t1, triface& t2) {
+ t1.tet[t1.loc] = encode(t2);
+ t2.tet[t2.loc] = encode(t1);
+}
+
+// Dissolve a bond (from one side). Note that the other tetrahedron will
+// still think it is connected to this tetrahedron. Usually, however,
+// the other tetrahedron is being deleted entirely, or bonded to another
+// tetrahedron, so it doesn't matter.
+
+inline void tetgenmesh::dissolve(triface& t) {
+ t.tet[t.loc] = (tetrahedron) dummytet;
+}
+
+// These primitives determine or set the origin, destination, apex or
+// opposition of a tetrahedron with respect to 'loc' and 'ver'.
+
+inline tetgenmesh::point tetgenmesh::org(triface& t) {
+ return (point) t.tet[locver2org[t.loc][t.ver] + 4];
+}
+
+inline tetgenmesh::point tetgenmesh::dest(triface& t) {
+ return (point) t.tet[locver2dest[t.loc][t.ver] + 4];
+}
+
+inline tetgenmesh::point tetgenmesh::apex(triface& t) {
+ return (point) t.tet[locver2apex[t.loc][t.ver] + 4];
+}
+
+inline tetgenmesh::point tetgenmesh::oppo(triface& t) {
+ return (point) t.tet[loc2oppo[t.loc] + 4];
+}
+
+inline void tetgenmesh::setorg(triface& t, point pointptr) {
+ t.tet[locver2org[t.loc][t.ver] + 4] = (tetrahedron) pointptr;
+}
+
+inline void tetgenmesh::setdest(triface& t, point pointptr) {
+ t.tet[locver2dest[t.loc][t.ver] + 4] = (tetrahedron) pointptr;
+}
+
+inline void tetgenmesh::setapex(triface& t, point pointptr) {
+ t.tet[locver2apex[t.loc][t.ver] + 4] = (tetrahedron) pointptr;
+}
+
+inline void tetgenmesh::setoppo(triface& t, point pointptr) {
+ t.tet[loc2oppo[t.loc] + 4] = (tetrahedron) pointptr;
+}
+
+// These primitives were drived from Mucke's triangle-edge data structure
+// to change face-edge relation in a tetrahedron (esym, enext and enext2)
+// or between two tetrahedra (fnext).
+
+// If e0 = e(i, j), e1 = e(j, i), that is e0 and e1 are the two directions
+// of the same undirected edge of a face. e0.sym() = e1 and vice versa.
+
+inline void tetgenmesh::esym(triface& t1, triface& t2) {
+ t2.tet = t1.tet;
+ t2.loc = t1.loc;
+ t2.ver = t1.ver + (EdgeRing(t1.ver) ? -1 : 1);
+}
+
+inline void tetgenmesh::esymself(triface& t) {
+ t.ver += (EdgeRing(t.ver) ? -1 : 1);
+}
+
+// If e0 and e1 are both in the same edge ring of a face, e1 = e0.enext().
+
+inline void tetgenmesh::enext(triface& t1, triface& t2) {
+ t2.tet = t1.tet;
+ t2.loc = t1.loc;
+ t2.ver = ve[t1.ver];
+}
+
+inline void tetgenmesh::enextself(triface& t) {
+ t.ver = ve[t.ver];
+}
+
+// enext2() is equal to e2 = e0.enext().enext()
+
+inline void tetgenmesh::enext2(triface& t1, triface& t2) {
+ t2.tet = t1.tet;
+ t2.loc = t1.loc;
+ t2.ver = ve[ve[t1.ver]];
+}
+
+inline void tetgenmesh::enext2self(triface& t) {
+ t.ver = ve[ve[t.ver]];
+}
+
+// If f0 and f1 are both in the same face ring of a face, f1 = f0.fnext().
+// If f1 exists, return true. Otherwise, return false, i.e., f0 is a
+// boundary or hull face.
+
+inline bool tetgenmesh::fnext(triface& t1, triface& t2) {
+ return getnextface(&t1, &t2);
+}
+
+inline bool tetgenmesh::fnextself(triface& t) {
+ return getnextface(&t, NULL);
+}
+
+// enextfnext() and enext2fnext() are combination primitives of enext(),
+// enext2() and fnext().
+
+inline void tetgenmesh::enextfnext(triface& t1, triface& t2) {
+ enext(t1, t2);
+ fnextself(t2);
+}
+
+inline void tetgenmesh::enextfnextself(triface& t) {
+ enextself(t);
+ fnextself(t);
+}
+
+inline void tetgenmesh::enext2fnext(triface& t1, triface& t2) {
+ enext2(t1, t2);
+ fnextself(t2);
+}
+
+inline void tetgenmesh::enext2fnextself(triface& t) {
+ enext2self(t);
+ fnextself(t);
+}
+
+// Primitives to infect or cure a tetrahedron with the virus. The last
+// third bit of the pointer is marked for infection. These rely on the
+// assumption that all tetrahedron are aligned to eight-byte boundaries.
+
+inline void tetgenmesh::infect(triface& t) {
+ t.tet[0] = (tetrahedron) ((unsigned long) t.tet[0] | (unsigned long) 4l);
+}
+
+inline void tetgenmesh::uninfect(triface& t) {
+ t.tet[0] = (tetrahedron) ((unsigned long) t.tet[0] & ~ (unsigned long) 4l);
+}
+
+// Test a tetrahedron for viral infection.
+
+inline bool tetgenmesh::infected(triface& t) {
+ return (((unsigned long) t.tet[0] & (unsigned long) 4l) != 0);
+}
+
+// Check or set a tetrahedron's attributes.
+
+inline REAL tetgenmesh::elemattribute(tetrahedron* ptr, int attnum) {
+ return ((REAL *) (ptr))[elemattribindex + attnum];
+}
+
+inline void tetgenmesh::
+setelemattribute(tetrahedron* ptr, int attnum, REAL value){
+ ((REAL *) (ptr))[elemattribindex + attnum] = value;
+}
+
+// Check or set a tetrahedron's maximum volume bound.
+
+inline REAL tetgenmesh::volumebound(tetrahedron* ptr) {
+ return ((REAL *) (ptr))[volumeboundindex];
+}
+
+inline void tetgenmesh::setvolumebound(tetrahedron* ptr, REAL value) {
+ ((REAL *) (ptr))[volumeboundindex] = value;
+}
+
+//
+// End of primitives for tetrahedra
+//
+
+//
+// Begin of primitives for subfaces/subsegments
+//
+
+// Each subface contains three pointers to its neighboring subfaces, with
+// edge versions. To save memory, both information are kept in a single
+// pointer. To make this possible, all subfaces are aligned to eight-byte
+// boundaries, so that the last three bits of each pointer are zeros. An
+// edge version (in the range 0 to 5) is compressed into the last three
+// bits of each pointer by 'sencode()'. 'sdecode()' decodes a pointer,
+// extracting an edge version and a pointer to the beginning of a subface.
+
+inline void tetgenmesh::sdecode(shellface sptr, face& s) {
+ s.shver = (int) ((unsigned long) (sptr) & (unsigned long) 7l);
+ s.sh = (shellface *) ((unsigned long) (sptr) & ~ (unsigned long) 7l);
+}
+
+inline tetgenmesh::shellface tetgenmesh::sencode(face& s) {
+ return (shellface) ((unsigned long) s.sh | (unsigned long) s.shver);
+}
+
+// spivot() finds the other subface (from this subface) that shares the
+// same edge.
+
+inline void tetgenmesh::spivot(face& s1, face& s2) {
+ shellface sptr = s1.sh[Orient(s1.shver)];
+ sdecode(sptr, s2);
+}
+
+inline void tetgenmesh::spivotself(face& s) {
+ shellface sptr = s.sh[Orient(s.shver)];
+ sdecode(sptr, s);
+}
+
+// sbond() bonds two subfaces together, i.e., after bonding, both faces
+// are pointing to each other.
+
+inline void tetgenmesh::sbond(face& s1, face& s2) {
+ s1.sh[Orient(s1.shver)] = sencode(s2);
+ s2.sh[Orient(s2.shver)] = sencode(s1);
+}
+
+// sbond1() only bonds s2 to s1, i.e., after bonding, s1 is pointing to s2,
+// but s2 is not pointing to s1.
+
+inline void tetgenmesh::sbond1(face& s1, face& s2) {
+ s1.sh[Orient(s1.shver)] = sencode(s2);
+}
+
+// Dissolve a subface bond (from one side). Note that the other subface
+// will still think it's connected to this subface.
+
+inline void tetgenmesh::sdissolve(face& s) {
+ s.sh[Orient(s.shver)] = (shellface) dummysh;
+}
+
+// These primitives determine or set the origin, destination, or apex
+// of a subface with respect to the edge version.
+
+inline tetgenmesh::point tetgenmesh::sorg(face& s) {
+ return (point) s.sh[3 + vo[s.shver]];
+}
+
+inline tetgenmesh::point tetgenmesh::sdest(face& s) {
+ return (point) s.sh[3 + vd[s.shver]];
+}
+
+inline tetgenmesh::point tetgenmesh::sapex(face& s) {
+ return (point) s.sh[3 + va[s.shver]];
+}
+
+inline void tetgenmesh::setsorg(face& s, point pointptr) {
+ s.sh[3 + vo[s.shver]] = (shellface) pointptr;
+}
+
+inline void tetgenmesh::setsdest(face& s, point pointptr) {
+ s.sh[3 + vd[s.shver]] = (shellface) pointptr;
+}
+
+inline void tetgenmesh::setsapex(face& s, point pointptr) {
+ s.sh[3 + va[s.shver]] = (shellface) pointptr;
+}
+
+// These primitives were drived from Mucke[2]'s triangle-edge data structure
+// to change face-edge relation in a subface (sesym, senext and senext2).
+
+inline void tetgenmesh::sesym(face& s1, face& s2) {
+ s2.sh = s1.sh;
+ s2.shver = s1.shver + (EdgeRing(s1.shver) ? -1 : 1);
+}
+
+inline void tetgenmesh::sesymself(face& s) {
+ s.shver += (EdgeRing(s.shver) ? -1 : 1);
+}
+
+inline void tetgenmesh::senext(face& s1, face& s2) {
+ s2.sh = s1.sh;
+ s2.shver = ve[s1.shver];
+}
+
+inline void tetgenmesh::senextself(face& s) {
+ s.shver = ve[s.shver];
+}
+
+inline void tetgenmesh::senext2(face& s1, face& s2) {
+ s2.sh = s1.sh;
+ s2.shver = ve[ve[s1.shver]];
+}
+
+inline void tetgenmesh::senext2self(face& s) {
+ s.shver = ve[ve[s.shver]];
+}
+
+// If f0 and f1 are both in the same face ring, then f1 = f0.fnext(),
+
+inline void tetgenmesh::sfnext(face& s1, face& s2) {
+ getnextsface(&s1, &s2);
+}
+
+inline void tetgenmesh::sfnextself(face& s) {
+ getnextsface(&s, NULL);
+}
+
+// These primitives read or set a pointer of the badface structure. The
+// pointer is stored sh[11].
+
+inline tetgenmesh::badface* tetgenmesh::shell2badface(face& s) {
+ return (badface*) s.sh[11];
+}
+
+inline void tetgenmesh::setshell2badface(face& s, badface* value) {
+ s.sh[11] = (shellface) value;
+}
+
+// Check or set a subface's maximum area bound.
+
+inline REAL tetgenmesh::areabound(face& s) {
+ return ((REAL *) (s.sh))[areaboundindex];
+}
+
+inline void tetgenmesh::setareabound(face& s, REAL value) {
+ ((REAL *) (s.sh))[areaboundindex] = value;
+}
+
+// These two primitives read or set a shell marker. Shell markers are used
+// to hold user boundary information.
+
+inline int tetgenmesh::shellmark(face& s) {
+ return ((int *) (s.sh))[shmarkindex];
+}
+
+inline void tetgenmesh::setshellmark(face& s, int value) {
+ ((int *) (s.sh))[shmarkindex] = value;
+}
+
+// These two primitives set or read the type of the subface or subsegment.
+
+inline enum tetgenmesh::shestype tetgenmesh::shelltype(face& s) {
+ return (enum shestype) ((int *) (s.sh))[shmarkindex + 1];
+}
+
+inline void tetgenmesh::setshelltype(face& s, enum shestype value) {
+ ((int *) (s.sh))[shmarkindex + 1] = (int) value;
+}
+
+// These two primitives set or read the pbc group of the subface.
+
+inline int tetgenmesh::shellpbcgroup(face& s) {
+ return ((int *) (s.sh))[shmarkindex + 2];
+}
+
+inline void tetgenmesh::setshellpbcgroup(face& s, int value) {
+ ((int *) (s.sh))[shmarkindex + 2] = value;
+}
+
+// Primitives to infect or cure a subface with the virus. These rely on the
+// assumption that all tetrahedra are aligned to eight-byte boundaries.
+
+inline void tetgenmesh::sinfect(face& s) {
+ s.sh[6] = (shellface) ((unsigned long) s.sh[6] | (unsigned long) 4l);
+}
+
+inline void tetgenmesh::suninfect(face& s) {
+ s.sh[6] = (shellface)((unsigned long) s.sh[6] & ~(unsigned long) 4l);
+}
+
+// Test a subface for viral infection.
+
+inline bool tetgenmesh::sinfected(face& s) {
+ return (((unsigned long) s.sh[6] & (unsigned long) 4l) != 0);
+}
+
+//
+// End of primitives for subfaces/subsegments
+//
+
+//
+// Begin of primitives for interacting between tetrahedra and subfaces
+//
+
+// tspivot() finds a subface abutting on this tetrahdera.
+
+inline void tetgenmesh::tspivot(triface& t, face& s) {
+ shellface sptr = (shellface) t.tet[8 + t.loc];
+ sdecode(sptr, s);
+}
+
+// stpivot() finds a tetrahedron abutting a subface.
+
+inline void tetgenmesh::stpivot(face& s, triface& t) {
+ tetrahedron ptr = (tetrahedron) s.sh[6 + EdgeRing(s.shver)];
+ decode(ptr, t);
+}
+
+// tsbond() bond a tetrahedron to a subface.
+
+inline void tetgenmesh::tsbond(triface& t, face& s) {
+ t.tet[8 + t.loc] = (tetrahedron) sencode(s);
+ s.sh[6 + EdgeRing(s.shver)] = (shellface) encode(t);
+}
+
+// tsdissolve() dissolve a bond (from the tetrahedron side).
+
+inline void tetgenmesh::tsdissolve(triface& t) {
+ t.tet[8 + t.loc] = (tetrahedron) dummysh;
+}
+
+// stdissolve() dissolve a bond (from the subface side).
+
+inline void tetgenmesh::stdissolve(face& s) {
+ s.sh[6 + EdgeRing(s.shver)] = (shellface) dummytet;
+}
+
+//
+// End of primitives for interacting between tetrahedra and subfaces
+//
+
+//
+// Begin of primitives for interacting between subfaces and subsegs
+//
+
+// sspivot() finds a subsegment abutting a subface.
+
+inline void tetgenmesh::sspivot(face& s, face& edge) {
+ shellface sptr = (shellface) s.sh[8 + Orient(s.shver)];
+ sdecode(sptr, edge);
+}
+
+// ssbond() bond a subface to a subsegment.
+
+inline void tetgenmesh::ssbond(face& s, face& edge) {
+ s.sh[8 + Orient(s.shver)] = sencode(edge);
+ edge.sh[0] = sencode(s);
+}
+
+// ssdisolve() dissolve a bond (from the subface side)
+
+inline void tetgenmesh::ssdissolve(face& s) {
+ s.sh[8 + Orient(s.shver)] = (shellface) dummysh;
+}
+
+//
+// End of primitives for interacting between subfaces and subsegs
+//
+
+//
+// Begin of primitives for points
+//
+
+inline int tetgenmesh::pointmark(point pt) {
+ return ((int *) (pt))[pointmarkindex];
+}
+
+inline void tetgenmesh::setpointmark(point pt, int value) {
+ ((int *) (pt))[pointmarkindex] = value;
+}
+
+// These two primitives set and read the type of the point.
+
+inline enum tetgenmesh::verttype tetgenmesh::pointtype(point pt) {
+ return (enum verttype) ((int *) (pt))[pointmarkindex + 1];
+}
+
+inline void tetgenmesh::setpointtype(point pt, enum verttype value) {
+ ((int *) (pt))[pointmarkindex + 1] = (int) value;
+}
+
+// These two primitives set and read a pointer to a tetrahedron.
+
+inline tetgenmesh::tetrahedron tetgenmesh::point2tet(point pt) {
+ return ((tetrahedron *) (pt))[point2simindex];
+}
+
+inline void tetgenmesh::setpoint2tet(point pt, tetrahedron value) {
+ ((tetrahedron *) (pt))[point2simindex] = value;
+}
+
+// These two primitives set and read a pointer to a subface/subsegment.
+// Note: they use the same field as the above. Don't use them together.
+
+inline tetgenmesh::shellface tetgenmesh::point2sh(point pt) {
+ return (shellface) ((tetrahedron *) (pt))[point2simindex];
+}
+
+inline void tetgenmesh::setpoint2sh(point pt, shellface value) {
+ ((tetrahedron *) (pt))[point2simindex] = (tetrahedron) value;
+}
+
+// These two primitives set and read a pointer to a point.
+// Note: they use the same field as the above. Don't use them together.
+
+inline tetgenmesh::point tetgenmesh::point2pt(point pt) {
+ return (point) ((tetrahedron *) (pt))[point2simindex];
+}
+
+inline void tetgenmesh::setpoint2pt(point pt, point value) {
+ ((tetrahedron *) (pt))[point2simindex] = (tetrahedron) value;
+}
+
+// These primitives set and read a pointer to its parent point. They're used
+// only in qulaity conforming Delaunay mesh algorithm.
+
+inline tetgenmesh::point tetgenmesh::point2ppt(point pt) {
+ return (point) ((tetrahedron *) (pt))[point2simindex + 1];
+}
+
+inline void tetgenmesh::setpoint2ppt(point pt, point value) {
+ ((tetrahedron *) (pt))[point2simindex + 1] = (tetrahedron) value;
+}
+
+// These primitives set and read a pointer to its pbc point.
+
+inline tetgenmesh::point tetgenmesh::point2pbcpt(point pt) {
+ return (point) ((tetrahedron *) (pt))[point2pbcptindex];
+}
+
+inline void tetgenmesh::setpoint2pbcpt(point pt, point value) {
+ ((tetrahedron *) (pt))[point2pbcptindex] = (tetrahedron) value;
+}
+
+// These primitives set and read a edge bound of this point.
+
+inline REAL tetgenmesh::edgebound(point pt) {
+ return ((REAL *) (pt))[edgeboundindex];
+}
+
+inline void tetgenmesh::setedgebound(point pt, REAL value) {
+ ((REAL *) (pt))[edgeboundindex] = value;
+}
+
+// Get the pre-calculated lifting point of a facet (specified by its mark).
+
+inline tetgenmesh::point tetgenmesh::getliftpoint(int facetmark) {
+ return (point) &liftpointarray[(facetmark - 1) * 3];
+}
+
+//
+// End of primitives for points
+//
+
+//
+// Begin of advanced primitives
+//
+
+// adjustedgering() adjusts the edge version so that it belongs to the
+// indicated edge ring. The 'direction' only can be 0(CCW) or 1(CW).
+// If the edge is not in the wanted edge ring, reverse it.
+
+inline void tetgenmesh::adjustedgering(triface& t, int direction) {
+ if (EdgeRing(t.ver) != direction) {
+ esymself(t);
+ }
+}
+
+inline void tetgenmesh::adjustedgering(face& s, int direction) {
+ if (EdgeRing(s.shver) != direction) {
+ sesymself(s);
+ }
+}
+
+// isdead() returns TRUE if the tetrahedron or subface has been dealloced.
+
+inline bool tetgenmesh::isdead(triface* t) {
+ if (t->tet == (tetrahedron *) NULL) return true;
+ else return t->tet[4] == (tetrahedron) NULL;
+}
+
+inline bool tetgenmesh::isdead(face* s) {
+ if (s->sh == (shellface *) NULL) return true;
+ else return s->sh[3] == (shellface) NULL;
+}
+
+// isfacehaspoint() returns TRUE if the 'testpoint' is one of the vertices
+// of the subface 's'.
+
+inline bool tetgenmesh::isfacehaspoint(face* s, point testpoint) {
+ return (s->sh[3] == (shellface) testpoint) ||
+ (s->sh[4] == (shellface) testpoint) ||
+ (s->sh[5] == (shellface) testpoint);
+}
+
+// isfacehasedge() returns TRUE if the edge (given by its two endpoints) is
+// one of the three edges of the subface 's'.
+
+inline bool tetgenmesh::isfacehasedge(face* s, point tend1, point tend2) {
+ return (isfacehaspoint(s, tend1) && isfacehaspoint(s, tend2));
+}
+
+// issymexist() returns TRUE if the adjoining tetrahedron is not 'duumytet'.
+
+inline bool tetgenmesh::issymexist(triface* t) {
+ tetrahedron *ptr = (tetrahedron *)
+ ((unsigned long)(t->tet[t->loc]) & ~(unsigned long)7l);
+ return ptr != dummytet;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getnextface() Get the successor of 'tface1' in the face ring. //
+// //
+// If 'tface1' is not a boundary (or hull) face, then its successor in the //
+// face ring exists. The successor is returned in 'tface2' if it is not a //
+// NULL, or the 'tface1' itself is used to return this face. On finish, the //
+// function returns TRUE. //
+// //
+// If 'tface1' is a boundary (or hull) face, its successor does not exist. //
+// This case, return FALSE and 'tface1' remains unchanged. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::getnextface(triface* tface1, triface* tface2)
+{
+ point torg, tdest;
+ int tloc, tver;
+
+ // Where the next face locates, in 'tface1' or in its neigbhour? It can be
+ // quickly determined by checking the edge ring of 'tface1'.
+ if (EdgeRing(tface1->ver) == CW) {
+ // The next face is in the neigbhour of 'tface1'.
+ if (!issymexist(tface1)) {
+ // Hit outer space - The next face does not exist.
+ return false;
+ }
+ torg = org(*tface1);
+ tdest = dest(*tface1);
+ if (tface2) {
+ sym(*tface1, *tface2);
+ findedge(tface2, torg, tdest);
+ } else {
+ symself(*tface1);
+ findedge(tface1, torg, tdest);
+ }
+ } else {
+ // The next face is in 'tface1'.
+ if (tface2) {
+ *tface2 = *tface1;
+ }
+ }
+
+ if (tface2) {
+ tloc = tface2->loc;
+ tver = tface2->ver;
+ tface2->loc = locver2nextf[tloc][tver][0];
+ tface2->ver = locver2nextf[tloc][tver][1];
+ } else {
+ tloc = tface1->loc;
+ tver = tface1->ver;
+ tface1->loc = locver2nextf[tloc][tver][0];
+ tface1->ver = locver2nextf[tloc][tver][1];
+ }
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getnextsface() Finds the next subface in the face ring. //
+// //
+// For saving space in the data structure of subface, there only exists one //
+// face ring around a segment (see programming manual). This routine imple- //
+// ments the double face ring as desired in Muecke's data structure. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::getnextsface(face* s1, face* s2)
+{
+ face neighsh, spinsh;
+ face testseg;
+
+ sspivot(*s1, testseg);
+ if (testseg.sh != dummysh) {
+ testseg.shver = 0;
+ if (sorg(testseg) == sorg(*s1)) {
+ spivot(*s1, neighsh);
+ } else {
+ spinsh = *s1;
+ do {
+ neighsh = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != s1->sh);
+ }
+ } else {
+ spivot(*s1, neighsh);
+ }
+ if (sorg(neighsh) != sorg(*s1)) {
+ sesymself(neighsh);
+ }
+ if (s2 != (face *) NULL) {
+ *s2 = neighsh;
+ } else {
+ *s1 = neighsh;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tsspivot() Finds a subsegment abutting on a tetrahderon's edge. //
+// //
+// The edge is represented in the primary edge of 'checkedge'. If there is a //
+// subsegment bonded at this edge, it is returned in handle 'checkseg', the //
+// edge direction of 'checkseg' is conformed to 'checkedge'. If there isn't, //
+// set 'checkseg.sh = dummysh' to indicate it is not a subsegment. //
+// //
+// To find whether an edge of a tetrahedron is a subsegment or not. First we //
+// need find a subface around this edge to see if it contains a subsegment. //
+// The reason is there is no direct connection between a tetrahedron and its //
+// adjoining subsegments. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tsspivot(triface* checkedge, face* checkseg)
+{
+ triface spintet;
+ face parentsh;
+ point tapex;
+ int hitbdry;
+
+ spintet = *checkedge;
+ tapex = apex(*checkedge);
+ hitbdry = 0;
+ do {
+ tspivot(spintet, parentsh);
+ if (parentsh.sh != dummysh) {
+ // Find a subface!
+ findedge(&parentsh, org(*checkedge), dest(*checkedge));
+ sspivot(parentsh, *checkseg);
+ if (checkseg->sh != dummysh) {
+ // Find a subsegment! Correct its edge direction before return.
+ if (sorg(*checkseg) != sorg(parentsh)) {
+ sesymself(*checkseg);
+ }
+ }
+ return;
+ }
+ if (!fnextself(spintet)) {
+ hitbdry++;
+ if (hitbdry < 2) {
+ esym(*checkedge, spintet);
+ if (!fnextself(spintet)) {
+ hitbdry++;
+ }
+ }
+ }
+ } while ((apex(spintet) != tapex) && (hitbdry < 2));
+ // Not find.
+ checkseg->sh = dummysh;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// sstpivot() Finds a tetrahedron abutting a subsegment. //
+// //
+// This is the inverse operation of 'tsspivot()'. One subsegment shared by //
+// arbitrary number of tetrahedron, the returned tetrahedron is not unique. //
+// The edge direction of the returned tetrahedron is conformed to the given //
+// subsegment. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::sstpivot(face* checkseg, triface* retedge)
+{
+ face parentsh;
+
+ // Get the subface which holds the subsegment.
+ sdecode(checkseg->sh[0], parentsh);
+ assert(parentsh.sh != dummysh);
+ // Get a tetraheron to which the subface attches.
+ stpivot(parentsh, *retedge);
+ if (retedge->tet == dummytet) {
+ sesymself(parentsh);
+ stpivot(parentsh, *retedge);
+ assert(retedge->tet != dummytet);
+ }
+ // Correct the edge direction before return.
+ findedge(retedge, sorg(*checkseg), sdest(*checkseg));
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// findorg() Finds a point in the given handle (tetrahedron or subface). //
+// //
+// If 'dorg' is a one of vertices of the given handle, set the origin of //
+// this handle be that point and return TRUE. Otherwise, return FALSE and //
+// 'tface' remains unchanged. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::findorg(triface* tface, point dorg)
+{
+ if (org(*tface) == dorg) {
+ return true;
+ } else {
+ if (dest(*tface) == dorg) {
+ enextself(*tface);
+ return true;
+ } else {
+ if (apex(*tface) == dorg) {
+ enext2self(*tface);
+ return true;
+ } else {
+ if (oppo(*tface) == dorg) {
+ // Keep 'tface' referring to the same tet after fnext().
+ adjustedgering(*tface, CCW);
+ fnextself(*tface);
+ enext2self(*tface);
+ return true;
+ }
+ }
+ }
+ }
+ return false;
+}
+
+bool tetgenmesh::findorg(face* sface, point dorg)
+{
+ if (sorg(*sface) == dorg) {
+ return true;
+ } else {
+ if (sdest(*sface) == dorg) {
+ senextself(*sface);
+ return true;
+ } else {
+ if (sapex(*sface) == dorg) {
+ senext2self(*sface);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// findedge() Find an edge in the given handle (tetrahedron or subface). //
+// //
+// The edge is given in two points 'eorg' and 'edest'. It is assumed that //
+// the edge must exist in the given handle (tetrahedron or subface). This //
+// routine sets the right edge version for the input handle. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::findedge(triface* tface, point eorg, point edest)
+{
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ if (org(*tface) == eorg) {
+ if (dest(*tface) == edest) {
+ // Edge is found, return.
+ return;
+ }
+ } else {
+ if (org(*tface) == edest) {
+ if (dest(*tface) == eorg) {
+ // Edge is found, but need to inverse the direction.
+ esymself(*tface);
+ return;
+ }
+ }
+ }
+ enextself(*tface);
+ }
+ // It should not be here.
+ assert(i < 3);
+}
+
+void tetgenmesh::findedge(face* sface, point eorg, point edest)
+{
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ if (sorg(*sface) == eorg) {
+ if (sdest(*sface) == edest) {
+ // Edge is found, return.
+ return;
+ }
+ } else {
+ if (sorg(*sface) == edest) {
+ if (sdest(*sface) == eorg) {
+ // Edge is found, but need to inverse the direction.
+ sesymself(*sface);
+ return;
+ }
+ }
+ }
+ senextself(*sface);
+ }
+ // It should not be here.
+ assert(i < 3);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// findface() Find the face has the given origin, destination and apex. //
+// //
+// On input, 'fface' is a handle which may contain the three corners or may //
+// not or may be dead. On return, it represents exactly the face with the //
+// given origin, destination and apex. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::findface(triface *fface, point forg, point fdest, point fapex)
+{
+ triface spintet;
+ enum finddirectionresult collinear;
+ int hitbdry;
+
+ if (!isdead(fface)) {
+ // First check the easiest case, that 'fface' is just the right one.
+ if (org(*fface) == forg && dest(*fface) == fdest &&
+ apex(*fface) == fapex) return;
+ } else {
+ // The input handle is dead, use the 'recenttet' if it is alive.
+ if (!isdead(&recenttet)) *fface = recenttet;
+ }
+
+ if (!isdead(fface)) {
+ if (!findorg(fface, forg)) {
+ // 'forg' is not a corner of 'fface', locate it.
+ preciselocate(forg, fface);
+ }
+ // It is possible that forg is not found in a non-convex mesh.
+ if (org(*fface) == forg) {
+ collinear = finddirection(fface, fdest);
+ if (collinear == RIGHTCOLLINEAR) {
+ // fdest is just the destination.
+ } else if (collinear == LEFTCOLLINEAR) {
+ enext2self(*fface);
+ esymself(*fface);
+ } else if (collinear == TOPCOLLINEAR) {
+ fnextself(*fface);
+ enext2self(*fface);
+ esymself(*fface);
+ }
+ }
+ // It is possible taht fdest is not found in a non-convex mesh.
+ if ((org(*fface) == forg) && (dest(*fface) == fdest)) {
+ // Find the apex of 'fapex'.
+ spintet = *fface;
+ hitbdry = 0;
+ do {
+ if (apex(spintet) == fapex) {
+ // We have done. Be careful the edge direction of 'spintet',
+ // it may reversed because of hitting boundary once.
+ if (org(spintet) != org(*fface)) {
+ esymself(spintet);
+ }
+ *fface = spintet;
+ return;
+ }
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ if (hitbdry < 2) {
+ esym(*fface, spintet);
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ }
+ }
+ }
+ } while (hitbdry < 2 && apex(spintet) != apex(*fface));
+ // It is possible that fapex is not found in a non-convex mesh.
+ }
+ }
+
+ if (isdead(fface) || (org(*fface) != forg) || (dest(*fface) != fdest) ||
+ (apex(*fface) != fapex)) {
+ // Too bad, the input handle is useless. We have to find a handle
+ // for 'fface' contains the 'forg' and 'fdest'. Here a brute force
+ // search is performed.
+ if (b->verbose > 1) {
+ printf("Warning in findface(): Perform a brute-force searching.\n");
+ }
+ enum verttype forgty, fdestty, fapexty;
+ int share, i;
+ forgty = pointtype(forg);
+ fdestty = pointtype(fdest);
+ fapexty = pointtype(fapex);
+ setpointtype(forg, DEADVERTEX);
+ setpointtype(fdest, DEADVERTEX);
+ setpointtype(fapex, DEADVERTEX);
+ tetrahedrons->traversalinit();
+ fface->tet = tetrahedrontraverse();
+ while (fface->tet != (tetrahedron *) NULL) {
+ share = 0;
+ for (i = 0; i < 4; i++) {
+ if (pointtype((point) fface->tet[4 + i]) == DEADVERTEX) share ++;
+ }
+ if (share == 3) {
+ // Found! Set the correct face and desired corners.
+ if (pointtype((point) fface->tet[4]) != DEADVERTEX) {
+ fface->loc = 2;
+ } else if (pointtype((point) fface->tet[5]) != DEADVERTEX) {
+ fface->loc = 3;
+ } else if (pointtype((point) fface->tet[6]) != DEADVERTEX) {
+ fface->loc = 1;
+ } else { // pointtype((point) fface->tet[7]) != DEADVERTEX
+ fface->loc = 0;
+ }
+ findedge(fface, forg, fdest);
+ break;
+ }
+ fface->tet = tetrahedrontraverse();
+ }
+ setpointtype(forg, forgty);
+ setpointtype(fdest, fdestty);
+ setpointtype(fapex, fapexty);
+ if (fface->tet == (tetrahedron *) NULL) {
+ // It is impossible to reach here.
+ printf("Internal error: Fail to find the indicated face.\n");
+ internalerror();
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getonextseg() Get the next SEGMENT counterclockwise with the same org. //
+// //
+// 's' is a subface. This routine reteuns the segment which is counterclock- //
+// wise with the origin of s. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::getonextseg(face* s, face* lseg)
+{
+ face checksh, checkseg;
+ point forg;
+
+ forg = sorg(*s);
+ checksh = *s;
+ do {
+ // Go to the edge at forg's left side.
+ senext2self(checksh);
+ // Check if there is a segment attaching this edge.
+ sspivot(checksh, checkseg);
+ if (checkseg.sh != dummysh) break;
+ // No segment! Go to the neighbor of this subface.
+ spivotself(checksh);
+ // It should always meet a segment before come back.
+ assert(checksh.sh != s->sh);
+ if (sorg(checksh) != forg) {
+ sesymself(checksh);
+ assert(sorg(checksh) == forg);
+ }
+ } while (true);
+ assert(checkseg.sh != dummysh);
+ if (sorg(checkseg) != forg) sesymself(checkseg);
+ *lseg = checkseg;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getseghasorg() Get the segment containing the given point. //
+// //
+// On input we know 'dorg' is an endpoint of the segment containing 'sseg'. //
+// This routine search along 'sseg' for the vertex 'dorg'. On return, 'sseg' //
+// contains 'dorg' as its origin. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::getseghasorg(face* sseg, point dorg)
+{
+ face nextseg;
+ point checkpt;
+
+ nextseg = *sseg;
+ checkpt = sorg(nextseg);
+ while ((checkpt != dorg) && (pointtype(checkpt) == FREESEGVERTEX)) {
+ // Search dorg along the original direction of sseg.
+ senext2self(nextseg);
+ spivotself(nextseg);
+ nextseg.shver = 0;
+ if (sdest(nextseg) != checkpt) sesymself(nextseg);
+ checkpt = sorg(nextseg);
+ }
+ if (checkpt == dorg) {
+ *sseg = nextseg;
+ return;
+ }
+ nextseg = *sseg;
+ checkpt = sdest(nextseg);
+ while ((checkpt != dorg) && (pointtype(checkpt) == FREESEGVERTEX)) {
+ // Search dorg along the destinational direction of sseg.
+ senextself(nextseg);
+ spivotself(nextseg);
+ nextseg.shver = 0;
+ if (sorg(nextseg) != checkpt) sesymself(nextseg);
+ checkpt = sdest(nextseg);
+ }
+ if (checkpt == dorg) {
+ sesym(nextseg, *sseg);
+ return;
+ }
+ // Should not be here.
+ assert(0);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsubsegfarorg() Get the origin of the parent segment of a subseg. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::point tetgenmesh::getsubsegfarorg(face* sseg)
+{
+ face prevseg;
+ point checkpt;
+
+ checkpt = sorg(*sseg);
+ senext2(*sseg, prevseg);
+ spivotself(prevseg);
+ // Search dorg along the original direction of sseg.
+ while (prevseg.sh != dummysh) {
+ prevseg.shver = 0;
+ if (sdest(prevseg) != checkpt) sesymself(prevseg);
+ checkpt = sorg(prevseg);
+ senext2self(prevseg);
+ spivotself(prevseg);
+ }
+ return checkpt;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsubsegfardest() Get the dest. of the parent segment of a subseg. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::point tetgenmesh::getsubsegfardest(face* sseg)
+{
+ face nextseg;
+ point checkpt;
+
+ checkpt = sdest(*sseg);
+ senext(*sseg, nextseg);
+ spivotself(nextseg);
+ // Search dorg along the destinational direction of sseg.
+ while (nextseg.sh != dummysh) {
+ nextseg.shver = 0;
+ if (sorg(nextseg) != checkpt) sesymself(nextseg);
+ checkpt = sdest(nextseg);
+ senextself(nextseg);
+ spivotself(nextseg);
+ }
+ return checkpt;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// printtet() Print out the details of a tetrahedron on screen. //
+// //
+// It's also used when the highest level of verbosity (`-VVV') is specified. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::printtet(triface* tface)
+{
+ triface tmpface, prtface;
+ point tmppt;
+ face tmpsh;
+ int facecount;
+
+ printf("Tetra x%lx with loc(%i) and ver(%i):",
+ (unsigned long)(tface->tet), tface->loc, tface->ver);
+ if (infected(*tface)) {
+ printf(" (infected)");
+ }
+ printf("\n");
+
+ tmpface = *tface;
+ facecount = 0;
+ while(facecount < 4) {
+ tmpface.loc = facecount;
+ sym(tmpface, prtface);
+ if(prtface.tet == dummytet) {
+ printf(" [%i] Outer space.\n", facecount);
+ } else {
+ printf(" [%i] x%lx loc(%i).", facecount,
+ (unsigned long)(prtface.tet), prtface.loc);
+ if (infected(prtface)) {
+ printf(" (infected)");
+ }
+ printf("\n");
+ }
+ facecount ++;
+ }
+
+ tmppt = org(*tface);
+ if(tmppt == (point) NULL) {
+ printf(" Org [%i] NULL\n", locver2org[tface->loc][tface->ver]);
+ } else {
+ printf(" Org [%i] x%lx (%.12g,%.12g,%.12g) %d\n",
+ locver2org[tface->loc][tface->ver], (unsigned long)(tmppt),
+ tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
+ }
+ tmppt = dest(*tface);
+ if(tmppt == (point) NULL) {
+ printf(" Dest[%i] NULL\n", locver2dest[tface->loc][tface->ver]);
+ } else {
+ printf(" Dest[%i] x%lx (%.12g,%.12g,%.12g) %d\n",
+ locver2dest[tface->loc][tface->ver], (unsigned long)(tmppt),
+ tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
+ }
+ tmppt = apex(*tface);
+ if(tmppt == (point) NULL) {
+ printf(" Apex[%i] NULL\n", locver2apex[tface->loc][tface->ver]);
+ } else {
+ printf(" Apex[%i] x%lx (%.12g,%.12g,%.12g) %d\n",
+ locver2apex[tface->loc][tface->ver], (unsigned long)(tmppt),
+ tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
+ }
+ tmppt = oppo(*tface);
+ if(tmppt == (point) NULL) {
+ printf(" Oppo[%i] NULL\n", loc2oppo[tface->loc]);
+ } else {
+ printf(" Oppo[%i] x%lx (%.12g,%.12g,%.12g) %d\n",
+ loc2oppo[tface->loc], (unsigned long)(tmppt),
+ tmppt[0], tmppt[1], tmppt[2], pointmark(tmppt));
+ }
+
+ if (b->useshelles) {
+ tmpface = *tface;
+ facecount = 0;
+ while(facecount < 4) {
+ tmpface.loc = facecount;
+ tspivot(tmpface, tmpsh);
+ if(tmpsh.sh != dummysh) {
+ printf(" [%i] x%lx ID(%i) ", facecount,
+ (unsigned long)(tmpsh.sh), shellmark(tmpsh));
+ if (sorg(tmpsh) == (point) NULL) {
+ printf("(fake)");
+ }
+ printf("\n");
+ }
+ facecount ++;
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// printsh() Print out the details of a subface or subsegment on screen. //
+// //
+// It's also used when the highest level of verbosity (`-VVV') is specified. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::printsh(face* sface)
+{
+ face prtsh;
+ triface prttet;
+ point printpoint;
+
+ if (sapex(*sface) != NULL) {
+ printf("subface x%lx, ver %d, mark %d:",
+ (unsigned long)(sface->sh), sface->shver, shellmark(*sface));
+ } else {
+ printf("Subsegment x%lx, ver %d, mark %d:",
+ (unsigned long)(sface->sh), sface->shver, shellmark(*sface));
+ }
+ if (sinfected(*sface)) {
+ printf(" (infected)");
+ }
+ if (shell2badface(*sface)) {
+ printf(" (queued)");
+ }
+ if (sapex(*sface) != NULL) {
+ if (shelltype(*sface) == SHARPSUB) {
+ printf(" (sharp)");
+ } else if (shelltype(*sface) == SKINNYSUB) {
+ printf(" (skinny)");
+ }
+ } else {
+ if (shelltype(*sface) == SHARPSUB) {
+ printf(" (sharp)");
+ }
+ }
+ if (checkpbcs) {
+ if (shellpbcgroup(*sface) >= 0) {
+ printf(" (pbc %d)", shellpbcgroup(*sface));
+ }
+ }
+ printf("\n");
+
+ sdecode(sface->sh[0], prtsh);
+ if (prtsh.sh == dummysh) {
+ printf(" [0] = No shell\n");
+ } else {
+ printf(" [0] = x%lx %d\n", (unsigned long)(prtsh.sh), prtsh.shver);
+ }
+ sdecode(sface->sh[1], prtsh);
+ if (prtsh.sh == dummysh) {
+ printf(" [1] = No shell\n");
+ } else {
+ printf(" [1] = x%lx %d\n", (unsigned long)(prtsh.sh), prtsh.shver);
+ }
+ sdecode(sface->sh[2], prtsh);
+ if (prtsh.sh == dummysh) {
+ printf(" [2] = No shell\n");
+ } else {
+ printf(" [2] = x%lx %d\n", (unsigned long)(prtsh.sh), prtsh.shver);
+ }
+
+ printpoint = sorg(*sface);
+ if (printpoint == (point) NULL)
+ printf(" Org [%d] = NULL\n", vo[sface->shver]);
+ else
+ printf(" Org [%d] = x%lx (%.12g,%.12g,%.12g) %d\n",
+ vo[sface->shver], (unsigned long)(printpoint), printpoint[0],
+ printpoint[1], printpoint[2], pointmark(printpoint));
+ printpoint = sdest(*sface);
+ if (printpoint == (point) NULL)
+ printf(" Dest[%d] = NULL\n", vd[sface->shver]);
+ else
+ printf(" Dest[%d] = x%lx (%.12g,%.12g,%.12g) %d\n",
+ vd[sface->shver], (unsigned long)(printpoint), printpoint[0],
+ printpoint[1], printpoint[2], pointmark(printpoint));
+
+ if (sapex(*sface) != NULL) {
+ printpoint = sapex(*sface);
+ if (printpoint == (point) NULL)
+ printf(" Apex[%d] = NULL\n", va[sface->shver]);
+ else
+ printf(" Apex[%d] = x%lx (%.12g,%.12g,%.12g) %d\n",
+ va[sface->shver], (unsigned long)(printpoint), printpoint[0],
+ printpoint[1], printpoint[2], pointmark(printpoint));
+
+ decode(sface->sh[6], prttet);
+ if (prttet.tet == dummytet) {
+ printf(" [6] = Outer space\n");
+ } else {
+ printf(" [6] = x%lx %d\n",
+ (unsigned long)(prttet.tet), prttet.loc);
+ }
+ decode(sface->sh[7], prttet);
+ if (prttet.tet == dummytet) {
+ printf(" [7] = Outer space\n");
+ } else {
+ printf(" [7] = x%lx %d\n",
+ (unsigned long)(prttet.tet), prttet.loc);
+ }
+
+ sdecode(sface->sh[8], prtsh);
+ if (prtsh.sh == dummysh) {
+ printf(" [8] = No subsegment\n");
+ } else {
+ printf(" [8] = x%lx %d\n",
+ (unsigned long)(prtsh.sh), prtsh.shver);
+ }
+ sdecode(sface->sh[9], prtsh);
+ if (prtsh.sh == dummysh) {
+ printf(" [9] = No subsegment\n");
+ } else {
+ printf(" [9] = x%lx %d\n",
+ (unsigned long)(prtsh.sh), prtsh.shver);
+ }
+ sdecode(sface->sh[10], prtsh);
+ if (prtsh.sh == dummysh) {
+ printf(" [10]= No subsegment\n");
+ } else {
+ printf(" [10]= x%lx %d\n",
+ (unsigned long)(prtsh.sh), prtsh.shver);
+ }
+ }
+}
+
+//
+// End of advanced primitives
+//
+
+//
+// End of mesh manipulation primitives
+//
+
+//
+// Begin of mesh items searching routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// makepoint2tetmap() Construct a mapping from points to tetrahedra. //
+// //
+// Traverses all the tetrahedra, provides each corner of each tetrahedron //
+// with a pointer to that tetrahedera. Some pointers will be overwritten by //
+// other pointers because each point may be a corner of several tetrahedra, //
+// but in the end every point will point to a tetrahedron that contains it. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::makepoint2tetmap()
+{
+ triface tetloop;
+ point pointptr;
+
+ if (b->verbose) {
+ printf(" Constructing mapping from points to tetrahedra.\n");
+ }
+
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ // Check all four points of the tetrahedron.
+ tetloop.loc = 0;
+ pointptr = org(tetloop);
+ setpoint2tet(pointptr, encode(tetloop));
+ pointptr = dest(tetloop);
+ setpoint2tet(pointptr, encode(tetloop));
+ pointptr = apex(tetloop);
+ setpoint2tet(pointptr, encode(tetloop));
+ pointptr = oppo(tetloop);
+ setpoint2tet(pointptr, encode(tetloop));
+ // Get the next tetrahedron in the list.
+ tetloop.tet = tetrahedrontraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// makeindex2pointmap() Create a map from index to vertices. //
+// //
+// 'idx2verlist' returns the created map. Traverse all vertices, a pointer //
+// to each vertex is set into the array. The pointer to the first vertex is //
+// saved in 'idx2verlist[0]'. Don't forget to minus 'in->firstnumber' when //
+// to get the vertex form its index. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::makeindex2pointmap(point*& idx2verlist)
+{
+ point pointloop;
+ int idx;
+
+ if (b->verbose) {
+ printf(" Constructing mapping from indices to points.\n");
+ }
+
+ idx2verlist = new point[points->items];
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ idx = 0;
+ while (pointloop != (point) NULL) {
+ idx2verlist[idx] = pointloop;
+ idx++;
+ pointloop = pointtraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// makesegmentmap() Create a map from vertices (their indices) to //
+// segments incident at the same vertices. //
+// //
+// Two arrays 'idx2seglist' and 'segsperverlist' together return the map. //
+// They form a sparse matrix structure with size (n + 1) x (n + 1), n is the //
+// number of segments. idx2seglist contains row information and //
+// segsperverlist contains all (non-zero) elements. The i-th entry of //
+// idx2seglist is the starting position of i-th row's (non-zero) elements in //
+// segsperverlist. The number of elements of i-th row is calculated by the //
+// (i+1)-th entry minus i-th entry of idx2seglist. //
+// //
+// NOTE: These two arrays will be created inside this routine, don't forget //
+// to free them after using. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+makesegmentmap(int*& idx2seglist, shellface**& segsperverlist)
+{
+ shellface *shloop;
+ int i, j, k;
+
+ if (b->verbose) {
+ printf(" Constructing mapping from points to segments.\n");
+ }
+
+ // Create and initialize 'idx2seglist'.
+ idx2seglist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) {
+ idx2seglist[i] = 0;
+ }
+
+ // Loop the set of segments once, counter the number of segments sharing
+ // each vertex.
+ subsegs->traversalinit();
+ shloop = shellfacetraverse(subsegs);
+ while (shloop != (shellface *) NULL) {
+ // Increment the number of sharing segments for each endpoint.
+ for (i = 0; i < 2; i++) {
+ j = pointmark((point) shloop[3 + i]) - in->firstnumber;
+ idx2seglist[j]++;
+ }
+ shloop = shellfacetraverse(subsegs);
+ }
+
+ // Calculate the total length of array 'facesperverlist'.
+ j = idx2seglist[0];
+ idx2seglist[0] = 0; // Array starts from 0 element.
+ for (i = 0; i < points->items; i++) {
+ k = idx2seglist[i + 1];
+ idx2seglist[i + 1] = idx2seglist[i] + j;
+ j = k;
+ }
+ // The total length is in the last unit of idx2seglist.
+ segsperverlist = new shellface*[idx2seglist[i]];
+ // Loop the set of segments again, set the info. of segments per vertex.
+ subsegs->traversalinit();
+ shloop = shellfacetraverse(subsegs);
+ while (shloop != (shellface *) NULL) {
+ for (i = 0; i < 2; i++) {
+ j = pointmark((point) shloop[3 + i]) - in->firstnumber;
+ segsperverlist[idx2seglist[j]] = shloop;
+ idx2seglist[j]++;
+ }
+ shloop = shellfacetraverse(subsegs);
+ }
+ // Contents in 'idx2seglist' are shifted, now shift them back.
+ for (i = points->items - 1; i >= 0; i--) {
+ idx2seglist[i + 1] = idx2seglist[i];
+ }
+ idx2seglist[0] = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// makesubfacemap() Create a map from vertices (their indices) to //
+// subfaces incident at the same vertices. //
+// //
+// Two arrays 'idx2facelist' and 'facesperverlist' together return the map. //
+// They form a sparse matrix structure with size (n + 1) x (n + 1), n is the //
+// number of subfaces. idx2facelist contains row information and //
+// facesperverlist contains all (non-zero) elements. The i-th entry of //
+// idx2facelist is the starting position of i-th row's(non-zero) elements in //
+// facesperverlist. The number of elements of i-th row is calculated by the //
+// (i+1)-th entry minus i-th entry of idx2facelist. //
+// //
+// NOTE: These two arrays will be created inside this routine, don't forget //
+// to free them after using. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+makesubfacemap(int*& idx2facelist, shellface**& facesperverlist)
+{
+ shellface *shloop;
+ int i, j, k;
+
+ if (b->verbose) {
+ printf(" Constructing mapping from points to subfaces.\n");
+ }
+
+ // Create and initialize 'idx2facelist'.
+ idx2facelist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) {
+ idx2facelist[i] = 0;
+ }
+
+ // Loop the set of subfaces once, counter the number of subfaces sharing
+ // each vertex.
+ subfaces->traversalinit();
+ shloop = shellfacetraverse(subfaces);
+ while (shloop != (shellface *) NULL) {
+ // Increment the number of sharing segments for each endpoint.
+ for (i = 0; i < 3; i++) {
+ j = pointmark((point) shloop[3 + i]) - in->firstnumber;
+ idx2facelist[j]++;
+ }
+ shloop = shellfacetraverse(subfaces);
+ }
+
+ // Calculate the total length of array 'facesperverlist'.
+ j = idx2facelist[0];
+ idx2facelist[0] = 0; // Array starts from 0 element.
+ for (i = 0; i < points->items; i++) {
+ k = idx2facelist[i + 1];
+ idx2facelist[i + 1] = idx2facelist[i] + j;
+ j = k;
+ }
+ // The total length is in the last unit of idx2facelist.
+ facesperverlist = new shellface*[idx2facelist[i]];
+ // Loop the set of segments again, set the info. of segments per vertex.
+ subfaces->traversalinit();
+ shloop = shellfacetraverse(subfaces);
+ while (shloop != (shellface *) NULL) {
+ for (i = 0; i < 3; i++) {
+ j = pointmark((point) shloop[3 + i]) - in->firstnumber;
+ facesperverlist[idx2facelist[j]] = shloop;
+ idx2facelist[j]++;
+ }
+ shloop = shellfacetraverse(subfaces);
+ }
+ // Contents in 'idx2facelist' are shifted, now shift them back.
+ for (i = points->items - 1; i >= 0; i--) {
+ idx2facelist[i + 1] = idx2facelist[i];
+ }
+ idx2facelist[0] = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// maketetrahedronmap() Create a map from vertices (their indices) to //
+// tetrahedra incident at the same vertices. //
+// //
+// Two arrays 'idx2tetlist' and 'tetsperverlist' together return the map. //
+// They form a sparse matrix structure with size (n + 1) x (n + 1), n is the //
+// number of tetrahedra. idx2tetlist contains row information and //
+// tetsperverlist contains all (non-zero) elements. The i-th entry of //
+// idx2tetlist is the starting position of i-th row's (non-zero) elements in //
+// tetsperverlist. The number of elements of i-th row is calculated by the //
+// (i+1)-th entry minus i-th entry of idx2tetlist. //
+// //
+// NOTE: These two arrays will be created inside this routine, don't forget //
+// to free them after using. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+maketetrahedronmap(int*& idx2tetlist, tetrahedron**& tetsperverlist)
+{
+ tetrahedron *tetloop;
+ int i, j, k;
+
+ if (b->verbose) {
+ printf(" Constructing mapping from points to tetrahedra.\n");
+ }
+
+ // Create and initialize 'idx2tetlist'.
+ idx2tetlist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) {
+ idx2tetlist[i] = 0;
+ }
+
+ // Loop the set of tetrahedra once, counter the number of tetrahedra
+ // sharing each vertex.
+ tetrahedrons->traversalinit();
+ tetloop = tetrahedrontraverse();
+ while (tetloop != (tetrahedron *) NULL) {
+ // Increment the number of sharing tetrahedra for each endpoint.
+ for (i = 0; i < 4; i++) {
+ j = pointmark((point) tetloop[4 + i]) - in->firstnumber;
+ idx2tetlist[j]++;
+ }
+ tetloop = tetrahedrontraverse();
+ }
+
+ // Calculate the total length of array 'tetsperverlist'.
+ j = idx2tetlist[0];
+ idx2tetlist[0] = 0; // Array starts from 0 element.
+ for (i = 0; i < points->items; i++) {
+ k = idx2tetlist[i + 1];
+ idx2tetlist[i + 1] = idx2tetlist[i] + j;
+ j = k;
+ }
+ // The total length is in the last unit of idx2tetlist.
+ tetsperverlist = new tetrahedron*[idx2tetlist[i]];
+ // Loop the set of tetrahedra again, set the info. of tet. per vertex.
+ tetrahedrons->traversalinit();
+ tetloop = tetrahedrontraverse();
+ while (tetloop != (tetrahedron *) NULL) {
+ for (i = 0; i < 4; i++) {
+ j = pointmark((point) tetloop[4 + i]) - in->firstnumber;
+ tetsperverlist[idx2tetlist[j]] = tetloop;
+ idx2tetlist[j]++;
+ }
+ tetloop = tetrahedrontraverse();
+ }
+ // Contents in 'idx2tetlist' are shifted, now shift them back.
+ for (i = points->items - 1; i >= 0; i--) {
+ idx2tetlist[i + 1] = idx2tetlist[i];
+ }
+ idx2tetlist[0] = 0;
+}
+
+//
+// End of mesh items searching routines
+//
+
+//
+// Begin of linear algebra functions
+//
+
+// dot() returns the dot product: v1 dot v2.
+
+inline REAL tetgenmesh::dot(REAL* v1, REAL* v2)
+{
+ return v1[0] * v2[0] + v1[1] * v2[1] + v1[2] * v2[2];
+}
+
+// cross() computes the cross product: n = v1 cross v2.
+
+inline void tetgenmesh::cross(REAL* v1, REAL* v2, REAL* n)
+{
+ n[0] = v1[1] * v2[2] - v2[1] * v1[2];
+ n[1] = -(v1[0] * v2[2] - v2[0] * v1[2]);
+ n[2] = v1[0] * v2[1] - v2[0] * v1[1];
+}
+
+// initm44() initializes a 4x4 matrix.
+void tetgenmesh::initm44(REAL a00, REAL a01, REAL a02, REAL a03,
+ REAL a10, REAL a11, REAL a12, REAL a13,
+ REAL a20, REAL a21, REAL a22, REAL a23,
+ REAL a30, REAL a31, REAL a32, REAL a33,
+ REAL M[4][4])
+{
+ M[0][0] = a00; M[0][1] = a01; M[0][2] = a02; M[0][3] = a03;
+ M[1][0] = a10; M[1][1] = a11; M[1][2] = a12; M[1][3] = a13;
+ M[2][0] = a20; M[2][1] = a21; M[2][2] = a22; M[2][3] = a23;
+ M[3][0] = a30; M[3][1] = a31; M[3][2] = a32; M[3][3] = a33;
+}
+
+// m4xm4() multiplies 2 4x4 matrics: m1 = m1 * m2.
+void tetgenmesh::m4xm4(REAL m1[4][4], REAL m2[4][4])
+{
+ REAL tmp[4];
+ int i, j;
+
+ for (i = 0; i < 4; i++) { // i-th row
+ for (j = 0; j < 4; j++) { // j-th col
+ tmp[j] = m1[i][0] * m2[0][j] + m1[i][1] * m2[1][j]
+ + m1[i][2] * m2[2][j] + m1[i][3] * m2[3][j];
+ }
+ for (j = 0; j < 4; j++)
+ m1[i][j] = tmp[j];
+ }
+}
+
+// m4xv4() multiplies a 4x4 matrix and 4x1 vector: v2 = m * v1
+void tetgenmesh::m4xv4(REAL v2[4], REAL m[4][4], REAL v1[4])
+{
+ v2[0] = m[0][0]*v1[0] + m[0][1]*v1[1] + m[0][2]*v1[2] + m[0][3]*v1[3];
+ v2[1] = m[1][0]*v1[0] + m[1][1]*v1[1] + m[1][2]*v1[2] + m[1][3]*v1[3];
+ v2[2] = m[2][0]*v1[0] + m[2][1]*v1[1] + m[2][2]*v1[2] + m[2][3]*v1[3];
+ v2[3] = m[3][0]*v1[0] + m[3][1]*v1[1] + m[3][2]*v1[2] + m[3][3]*v1[3];
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// lu_decmp() Compute the LU decomposition of a matrix. //
+// //
+// Compute the LU decomposition of a (non-singular) square matrix A using //
+// partial pivoting and implicit row exchanges. The result is: //
+// A = P * L * U, //
+// where P is a permutation matrix, L is unit lower triangular, and U is //
+// upper triangular. The factored form of A is used in combination with //
+// 'lu_solve()' to solve linear equations: Ax = b, or invert a matrix. //
+// //
+// The inputs are a square matrix 'lu[N..n+N-1][N..n+N-1]', it's size is 'n'.//
+// On output, 'lu' is replaced by the LU decomposition of a rowwise permuta- //
+// tion of itself, 'ps[N..n+N-1]' is an output vector that records the row //
+// permutation effected by the partial pivoting, effectively, 'ps' array //
+// tells the user what the permutation matrix P is; 'd' is output as +1/-1 //
+// depending on whether the number of row interchanges was even or odd, //
+// respectively. //
+// //
+// Return true if the LU decomposition is successfully computed, otherwise, //
+// return false in case that A is a singular matrix. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::lu_decmp(REAL lu[4][4], int n, int* ps, REAL* d, int N)
+{
+ REAL scales[4];
+ REAL pivot, biggest, mult, tempf;
+ int pivotindex = 0;
+ int i, j, k;
+
+ *d = 1.0; // No row interchanges yet.
+
+ for (i = N; i < n + N; i++) { // For each row.
+ // Find the largest element in each row for row equilibration
+ biggest = 0.0;
+ for (j = N; j < n + N; j++)
+ if (biggest < (tempf = fabs(lu[i][j])))
+ biggest = tempf;
+ if (biggest != 0.0)
+ scales[i] = 1.0 / biggest;
+ else {
+ scales[i] = 0.0;
+ return false; // Zero row: singular matrix.
+ }
+ ps[i] = i; // Initialize pivot sequence.
+ }
+
+ for (k = N; k < n + N - 1; k++) { // For each column.
+ // Find the largest element in each column to pivot around.
+ biggest = 0.0;
+ for (i = k; i < n + N; i++) {
+ if (biggest < (tempf = fabs(lu[ps[i]][k]) * scales[ps[i]])) {
+ biggest = tempf;
+ pivotindex = i;
+ }
+ }
+ if (biggest == 0.0) {
+ return false; // Zero column: singular matrix.
+ }
+ if (pivotindex != k) { // Update pivot sequence.
+ j = ps[k];
+ ps[k] = ps[pivotindex];
+ ps[pivotindex] = j;
+ *d = -(*d); // ...and change the parity of d.
+ }
+
+ // Pivot, eliminating an extra variable each time
+ pivot = lu[ps[k]][k];
+ for (i = k + 1; i < n + N; i++) {
+ lu[ps[i]][k] = mult = lu[ps[i]][k] / pivot;
+ if (mult != 0.0) {
+ for (j = k + 1; j < n + N; j++)
+ lu[ps[i]][j] -= mult * lu[ps[k]][j];
+ }
+ }
+ }
+
+ // (lu[ps[n + N - 1]][n + N - 1] == 0.0) ==> A is singular.
+ return lu[ps[n + N - 1]][n + N - 1] != 0.0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// lu_solve() Solves the linear equation: Ax = b, after the matrix A //
+// has been decomposed into the lower and upper triangular //
+// matrices L and U, where A = LU. //
+// //
+// 'lu[N..n+N-1][N..n+N-1]' is input, not as the matrix 'A' but rather as //
+// its LU decomposition, computed by the routine 'lu_decmp'; 'ps[N..n+N-1]' //
+// is input as the permutation vector returned by 'lu_decmp'; 'b[N..n+N-1]' //
+// is input as the right-hand side vector, and returns with the solution //
+// vector. 'lu', 'n', and 'ps' are not modified by this routine and can be //
+// left in place for successive calls with different right-hand sides 'b'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::lu_solve(REAL lu[4][4], int n, int* ps, REAL* b, int N)
+{
+ int i, j;
+ REAL X[4], dot;
+
+ for (i = N; i < n + N; i++) X[i] = 0.0;
+
+ // Vector reduction using U triangular matrix.
+ for (i = N; i < n + N; i++) {
+ dot = 0.0;
+ for (j = N; j < i + N; j++)
+ dot += lu[ps[i]][j] * X[j];
+ X[i] = b[ps[i]] - dot;
+ }
+
+ // Back substitution, in L triangular matrix.
+ for (i = n + N - 1; i >= N; i--) {
+ dot = 0.0;
+ for (j = i + 1; j < n + N; j++)
+ dot += lu[ps[i]][j] * X[j];
+ X[i] = (X[i] - dot) / lu[ps[i]][i];
+ }
+
+ for (i = N; i < n + N; i++) b[i] = X[i];
+}
+
+//
+// End of linear algebra functions
+//
+
+//
+// Begin of geometric tests
+//
+
+// All the following routines require the input objects are not degenerate.
+// i.e., a triangle must has three non-collinear corners; an edge must
+// has two identical endpoints. Degenerate cases should have to detect
+// first and then handled as special cases.
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// edge_vert_col_inter() Test whether an edge (ab) and a collinear vertex //
+// (p) are intersecting or not. //
+// //
+// Possible cases are p is coincident to a (p = a), or to b (p = b), or p is //
+// inside ab (a < p < b), or outside ab (p < a or p > b). These cases can be //
+// quickly determined by comparing the corresponding coords of a, b, and p //
+// (which are not all equal). //
+// //
+// The return value indicates one of the three cases: DISJOINT, SHAREVERTEX //
+// (p = a or p = b), and INTERSECT (a < p < b). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+edge_vert_col_inter(REAL* A, REAL* B, REAL* P)
+{
+ int i = 0;
+ do {
+ if (A[i] < B[i]) {
+ if (P[i] < A[i]) {
+ return DISJOINT;
+ } else if (P[i] > A[i]) {
+ if (P[i] < B[i]) {
+ return INTERSECT;
+ } else if (P[i] > B[i]) {
+ return DISJOINT;
+ } else {
+ // assert(P[i] == B[i]);
+ return SHAREVERTEX;
+ }
+ } else {
+ // assert(P[i] == A[i]);
+ return SHAREVERTEX;
+ }
+ } else if (A[i] > B[i]) {
+ if (P[i] < B[i]) {
+ return DISJOINT;
+ } else if (P[i] > B[i]) {
+ if (P[i] < A[i]) {
+ return INTERSECT;
+ } else if (P[i] > A[i]) {
+ return DISJOINT;
+ } else {
+ // assert(P[i] == A[i]);
+ return SHAREVERTEX;
+ }
+ } else {
+ // assert(P[i] == B[i]);
+ return SHAREVERTEX;
+ }
+ }
+ // i-th coordinates are equal, try i+1-th;
+ i++;
+ } while (i < 3);
+ // Should never be here.
+ assert(i >= 3);
+ return DISJOINT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// edge_edge_cop_inter() Test whether two coplanar edges (ab, and pq) are //
+// intersecting or not. //
+// //
+// Possible cases are ab and pq are disjointed, or proper intersecting (int- //
+// ersect at a point other than their endpoints), or both collinear and int- //
+// ersecting, or sharing at a common endpoint, or are coincident. //
+// //
+// A reference point R is required, which is exactly not coplanar with these //
+// two edges. Since the caller knows these two edges are coplanar, it must //
+// be able to provide (or calculate) such a point. //
+// //
+// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
+// SHAREEDGE, and INTERSECT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+edge_edge_cop_inter(REAL* A, REAL* B, REAL* P, REAL* Q, REAL* R)
+{
+ REAL s1, s2, s3, s4;
+
+ assert(R != NULL);
+
+ s1 = orient3d(A, B, R, P);
+ s2 = orient3d(A, B, R, Q);
+ if (s1 * s2 > 0.0) {
+ // Both p and q are at the same side of ab.
+ return DISJOINT;
+ }
+ s3 = orient3d(P, Q, R, A);
+ s4 = orient3d(P, Q, R, B);
+ if (s3 * s4 > 0.0) {
+ // Both a and b are at the same side of pq.
+ return DISJOINT;
+ }
+
+ // Possible degenerate cases are:
+ // (1) Only one of p and q is collinear with ab;
+ // (2) Both p and q are collinear with ab;
+ // (3) Only one of a and b is collinear with pq.
+ enum interresult abp, abq;
+ enum interresult pqa, pqb;
+
+ if (s1 == 0.0) {
+ // p is collinear with ab.
+ abp = edge_vert_col_inter(A, B, P);
+ if (abp == INTERSECT) {
+ // p is inside ab.
+ return INTERSECT;
+ }
+ if (s2 == 0.0) {
+ // q is collinear with ab. Case (2).
+ abq = edge_vert_col_inter(A, B, Q);
+ if (abq == INTERSECT) {
+ // q is inside ab.
+ return INTERSECT;
+ }
+ if (abp == SHAREVERTEX && abq == SHAREVERTEX) {
+ // ab and pq are identical.
+ return SHAREEDGE;
+ }
+ pqa = edge_vert_col_inter(P, Q, A);
+ if (pqa == INTERSECT) {
+ // a is inside pq.
+ return INTERSECT;
+ }
+ pqb = edge_vert_col_inter(P, Q, B);
+ if (pqb == INTERSECT) {
+ // b is inside pq.
+ return INTERSECT;
+ }
+ if (abp == SHAREVERTEX || abq == SHAREVERTEX) {
+ // either p or q is coincident with a or b.
+ // ONLY one case is possible, otherwise, shoule be SHAREEDGE.
+ assert(abp ^ abq);
+ return SHAREVERTEX;
+ }
+ // The last case. They are disjointed.
+ assert((abp == DISJOINT) && (abp == abq && abq == pqa && pqa == pqb));
+ return DISJOINT;
+ } else {
+ // p is collinear with ab. Case (1).
+ assert(abp == SHAREVERTEX || abp == DISJOINT);
+ return abp;
+ }
+ }
+ // p is NOT collinear with ab.
+ if (s2 == 0.0) {
+ // q is collinear with ab. Case (1).
+ abq = edge_vert_col_inter(A, B, Q);
+ assert(abq == SHAREVERTEX || abq == DISJOINT || abq == INTERSECT);
+ return abq;
+ }
+
+ // We have found p and q are not collinear with ab. However, it is still
+ // possible that a or b is collinear with pq (ONLY one of a and b).
+ if (s3 == 0.0) {
+ // a is collinear with pq. Case (3).
+ assert(s4 != 0.0);
+ pqa = edge_vert_col_inter(P, Q, A);
+ // This case should have been detected in above.
+ assert(pqa != SHAREVERTEX);
+ assert(pqa == INTERSECT || pqa == DISJOINT);
+ return pqa;
+ }
+ if (s4 == 0.0) {
+ // b is collinear with pq. Case (3).
+ assert(s3 != 0.0);
+ pqb = edge_vert_col_inter(P, Q, B);
+ // This case should have been detected in above.
+ assert(pqb != SHAREVERTEX);
+ assert(pqb == INTERSECT || pqb == DISJOINT);
+ return pqb;
+ }
+
+ // ab and pq are intersecting properly.
+ return INTERSECT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Notations //
+// //
+// Let ABC be the plane passes through a, b, and c; ABC+ be the halfspace //
+// including the set of all points x, such that orient3d(a, b, c, x) > 0; //
+// ABC- be the other halfspace, such that for each point x in ABC-, //
+// orient3d(a, b, c, x) < 0. For the set of x which are on ABC, orient3d(a, //
+// b, c, x) = 0. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tri_vert_copl_inter() Test whether a triangle (abc) and a coplanar //
+// point (p) are intersecting or not. //
+// //
+// Possible cases are p is inside abc, or on an edge of, or coincident with //
+// a vertex of, or outside abc. //
+// //
+// A reference point R is required. R is exactly not coplanar with abc and p.//
+// Since the caller knows they are coplanar, it must be able to provide (or //
+// calculate) such a point. //
+// //
+// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
+// and INTERSECT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+tri_vert_cop_inter(REAL* A, REAL* B, REAL* C, REAL* P, REAL* R)
+{
+ REAL s1, s2, s3;
+ int sign;
+
+ assert(R != (REAL *) NULL);
+
+ // Adjust the orientation of a, b, c and r, so that we can assume that
+ // r is strictly in ABC- (i.e., r is above ABC wrt. right-hand rule).
+ s1 = orient3d(A, B, C, R);
+ assert(s1 != 0.0);
+ sign = s1 < 0.0 ? 1 : -1;
+
+ // Test starts from here.
+ s1 = orient3d(A, B, R, P) * sign;
+ if (s1 < 0.0) {
+ // p is in ABR-.
+ return DISJOINT;
+ }
+ s2 = orient3d(B, C, R, P) * sign;
+ if (s2 < 0.0) {
+ // p is in BCR-.
+ return DISJOINT;
+ }
+ s3 = orient3d(C, A, R, P) * sign;
+ if (s3 < 0.0) {
+ // p is in CAR-.
+ return DISJOINT;
+ }
+ if (s1 == 0.0) {
+ // p is on ABR.
+ if (s2 == 0.0) {
+ // p is on BCR.
+ assert(s3 > 0.0);
+ // p is coincident with b.
+ return SHAREVERTEX;
+ }
+ if (s3 == 0.0) {
+ // p is on CAR.
+ // p is coincident with a.
+ return SHAREVERTEX;
+ }
+ // p is on edge ab.
+ return INTERSECT;
+ }
+ // p is in ABR+.
+ if (s2 == 0.0) {
+ // p is on BCR.
+ if (s3 == 0.0) {
+ // p is on CAR.
+ // p is coincident with c.
+ return SHAREVERTEX;
+ }
+ // p is on edge bc.
+ return INTERSECT;
+ }
+ if (s3 == 0.0) {
+ // p is on CAR.
+ // p is on edge ca.
+ return INTERSECT;
+ }
+
+ // p is strictly inside abc.
+ return INTERSECT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tri_edge_cop_inter() Test whether a triangle (abc) and a coplanar edge //
+// (pq) are intersecting or not. //
+// //
+// A reference point R is required. R is exactly not coplanar with abc and //
+// pq. Since the caller knows they are coplanar, it must be able to provide //
+// (or calculate) such a point. //
+// //
+// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
+// SHAREEDGE, and INTERSECT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+tri_edge_cop_inter(REAL* A, REAL* B, REAL* C, REAL* P, REAL* Q, REAL* R)
+{
+ enum interresult abpq, bcpq, capq;
+ enum interresult abcp, abcq;
+
+ // Test if pq is intersecting one of edges of abc.
+ abpq = edge_edge_cop_inter(A, B, P, Q, R);
+ if (abpq == INTERSECT || abpq == SHAREEDGE) {
+ return abpq;
+ }
+ bcpq = edge_edge_cop_inter(B, C, P, Q, R);
+ if (bcpq == INTERSECT || bcpq == SHAREEDGE) {
+ return bcpq;
+ }
+ capq = edge_edge_cop_inter(C, A, P, Q, R);
+ if (capq == INTERSECT || capq == SHAREEDGE) {
+ return capq;
+ }
+
+ // Test if p and q is inside abc.
+ abcp = tri_vert_cop_inter(A, B, C, P, R);
+ if (abcp == INTERSECT) {
+ return INTERSECT;
+ }
+ abcq = tri_vert_cop_inter(A, B, C, Q, R);
+ if (abcq == INTERSECT) {
+ return INTERSECT;
+ }
+
+ // Combine the test results of edge intersectings and triangle insides
+ // to detect whether abc and pq are sharing vertex or disjointed.
+ if (abpq == SHAREVERTEX) {
+ // p or q is coincident with a or b.
+ assert(abcp ^ abcq);
+ return SHAREVERTEX;
+ }
+ if (bcpq == SHAREVERTEX) {
+ // p or q is coincident with b or c.
+ assert(abcp ^ abcq);
+ return SHAREVERTEX;
+ }
+ if (capq == SHAREVERTEX) {
+ // p or q is coincident with c or a.
+ assert(abcp ^ abcq);
+ return SHAREVERTEX;
+ }
+
+ // They are disjointed.
+ return DISJOINT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tri_edge_inter_tail() Test whether a triangle (abc) and an edge (pq) //
+// are intersecting or not. //
+// //
+// s1 and s2 are results of pre-performed orientation tests. s1 = orient3d( //
+// a, b, c, p); s2 = orient3d(a, b, c, q). To separate this routine from //
+// tri_edge_inter() can save two orientation tests in tri_tri_inter(). //
+// //
+// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
+// SHAREEDGE, and INTERSECT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+tri_edge_inter_tail(REAL* A, REAL* B, REAL* C, REAL* P, REAL* Q, REAL s1,
+ REAL s2)
+{
+ REAL s3, s4, s5;
+ int sign;
+
+ if (s1 * s2 > 0.0) {
+ // p, q are at the same halfspace of ABC, no intersection.
+ return DISJOINT;
+ }
+
+ if (s1 * s2 < 0.0) {
+ // p, q are both not on ABC (and not sharing vertices, edges of abc).
+ // Adjust the orientation of a, b, c and p, so that we can assume that
+ // p is strictly in ABC-, and q is strictly in ABC+.
+ sign = s1 < 0.0 ? 1 : -1;
+ s3 = orient3d(A, B, P, Q) * sign;
+ if (s3 < 0.0) {
+ // q is at ABP-.
+ return DISJOINT;
+ }
+ s4 = orient3d(B, C, P, Q) * sign;
+ if (s4 < 0.0) {
+ // q is at BCP-.
+ return DISJOINT;
+ }
+ s5 = orient3d(C, A, P, Q) * sign;
+ if (s5 < 0.0) {
+ // q is at CAP-.
+ return DISJOINT;
+ }
+ if (s3 == 0.0) {
+ // q is on ABP.
+ if (s4 == 0.0) {
+ // q is on BCP (and q must in CAP+).
+ assert(s5 > 0.0);
+ // pq intersects abc at vertex b.
+ return SHAREVERTEX;
+ }
+ if (s5 == 0.0) {
+ // q is on CAP (and q must in BCP+).
+ // pq intersects abc at vertex a.
+ return SHAREVERTEX;
+ }
+ // q in both BCP+ and CAP+.
+ // pq crosses ab properly.
+ return INTERSECT;
+ }
+ // q is in ABP+;
+ if (s4 == 0.0) {
+ // q is on BCP.
+ if (s5 == 0.0) {
+ // q is on CAP.
+ // pq intersects abc at vertex c.
+ return SHAREVERTEX;
+ }
+ // pq crosses bc properly.
+ return INTERSECT;
+ }
+ // q is in BCP+;
+ if (s5 == 0.0) {
+ // q is on CAP.
+ // pq crosses ca properly.
+ return INTERSECT;
+ }
+ // q is in CAP+;
+ // pq crosses abc properly.
+ return INTERSECT;
+ }
+
+ if (s1 != 0.0 || s2 != 0.0) {
+ // Either p or q is coplanar with abc. ONLY one of them is possible.
+ if (s1 == 0.0) {
+ // p is coplanar with abc, q can be used as reference point.
+ assert(s2 != 0.0);
+ return tri_vert_cop_inter(A, B, C, P, Q);
+ } else {
+ // q is coplanar with abc, p can be used as reference point.
+ assert(s2 == 0.0);
+ return tri_vert_cop_inter(A, B, C, Q, P);
+ }
+ }
+
+ // pq is coplanar with abc. Calculate a point which is exactly not
+ // coplanar with a, b, and c.
+ REAL R[3], N[3];
+ REAL ax, ay, az, bx, by, bz;
+
+ ax = A[0] - B[0];
+ ay = A[1] - B[1];
+ az = A[2] - B[2];
+ bx = A[0] - C[0];
+ by = A[1] - C[1];
+ bz = A[2] - C[2];
+ N[0] = ay * bz - by * az;
+ N[1] = az * bx - bz * ax;
+ N[2] = ax * by - bx * ay;
+ // The normal should not be a zero vector (otherwise, abc are collinear).
+ assert((fabs(N[0]) + fabs(N[1]) + fabs(N[2])) > 0.0);
+ // The reference point R is lifted from A to the normal direction with
+ // a distance d = average edge length of the triangle abc.
+ R[0] = N[0] + A[0];
+ R[1] = N[1] + A[1];
+ R[2] = N[2] + A[2];
+ // Becareful the case: if the non-zero component(s) in N is smaller than
+ // the machine epsilon (i.e., 2^(-16) for double), R will exactly equal
+ // to A due to the round-off error. Do check if it is.
+ if (R[0] == A[0] && R[1] == A[1] && R[2] == A[2]) {
+ int i, j;
+ for (i = 0; i < 3; i++) {
+ assert (R[i] == A[i]);
+ j = 2;
+ do {
+ if (N[i] > 0.0) {
+ N[i] += (j * macheps);
+ } else {
+ N[i] -= (j * macheps);
+ }
+ R[i] = N[i] + A[i];
+ j *= 2;
+ } while (R[i] == A[i]);
+ }
+ }
+
+ return tri_edge_cop_inter(A, B, C, P, Q, R);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tri_edge_inter() Test whether a triangle (abc) and an edge (pq) are //
+// intersecting or not. //
+// //
+// The return value indicates one of the four cases: DISJOINT, SHAREVERTEX, //
+// SHAREEDGE, and INTERSECT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+tri_edge_inter(REAL* A, REAL* B, REAL* C, REAL* P, REAL* Q)
+{
+ REAL s1, s2;
+
+ // Test the locations of p and q with respect to ABC.
+ s1 = orient3d(A, B, C, P);
+ s2 = orient3d(A, B, C, Q);
+
+ return tri_edge_inter_tail(A, B, C, P, Q, s1, s2);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tri_tri_inter() Test whether two triangle (abc) and (opq) are //
+// intersecting or not. //
+// //
+// The return value indicates one of the five cases: DISJOINT, SHAREVERTEX, //
+// SHAREEDGE, SHAREFACE, and INTERSECT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::interresult tetgenmesh::
+tri_tri_inter(REAL* A, REAL* B, REAL* C, REAL* O, REAL* P, REAL* Q)
+{
+ REAL s_o, s_p, s_q;
+ REAL s_a, s_b, s_c;
+
+ s_o = orient3d(A, B, C, O);
+ s_p = orient3d(A, B, C, P);
+ s_q = orient3d(A, B, C, Q);
+ if ((s_o * s_p > 0.0) && (s_o * s_q > 0.0)) {
+ // o, p, q are all in the same halfspace of ABC.
+ return DISJOINT;
+ }
+
+ s_a = orient3d(O, P, Q, A);
+ s_b = orient3d(O, P, Q, B);
+ s_c = orient3d(O, P, Q, C);
+ if ((s_a * s_b > 0.0) && (s_a * s_c > 0.0)) {
+ // a, b, c are all in the same halfspace of OPQ.
+ return DISJOINT;
+ }
+
+ enum interresult abcop, abcpq, abcqo;
+ int shareedge = 0;
+
+ abcop = tri_edge_inter_tail(A, B, C, O, P, s_o, s_p);
+ if (abcop == INTERSECT) {
+ return INTERSECT;
+ } else if (abcop == SHAREEDGE) {
+ shareedge++;
+ }
+ abcpq = tri_edge_inter_tail(A, B, C, P, Q, s_p, s_q);
+ if (abcpq == INTERSECT) {
+ return INTERSECT;
+ } else if (abcpq == SHAREEDGE) {
+ shareedge++;
+ }
+ abcqo = tri_edge_inter_tail(A, B, C, Q, O, s_q, s_o);
+ if (abcqo == INTERSECT) {
+ return INTERSECT;
+ } else if (abcqo == SHAREEDGE) {
+ shareedge++;
+ }
+ if (shareedge == 3) {
+ // opq are coincident with abc.
+ return SHAREFACE;
+ }
+ // It is only possible either no share edge or one.
+ assert(shareedge == 0 || shareedge == 1);
+
+ // Continue to detect whether opq and abc are intersecting or not.
+ enum interresult opqab, opqbc, opqca;
+
+ opqab = tri_edge_inter_tail(O, P, Q, A, B, s_a, s_b);
+ if (opqab == INTERSECT) {
+ return INTERSECT;
+ }
+ opqbc = tri_edge_inter_tail(O, P, Q, B, C, s_b, s_c);
+ if (opqbc == INTERSECT) {
+ return INTERSECT;
+ }
+ opqca = tri_edge_inter_tail(O, P, Q, C, A, s_c, s_a);
+ if (opqca == INTERSECT) {
+ return INTERSECT;
+ }
+
+ // At this point, two triangles are not intersecting and not coincident.
+ // They may be share an edge, or share a vertex, or disjoint.
+ if (abcop == SHAREEDGE) {
+ assert(abcpq == SHAREVERTEX && abcqo == SHAREVERTEX);
+ // op is coincident with an edge of abc.
+ return SHAREEDGE;
+ }
+ if (abcpq == SHAREEDGE) {
+ assert(abcop == SHAREVERTEX && abcqo == SHAREVERTEX);
+ // pq is coincident with an edge of abc.
+ return SHAREEDGE;
+ }
+ if (abcqo == SHAREEDGE) {
+ assert(abcop == SHAREVERTEX && abcpq == SHAREVERTEX);
+ // qo is coincident with an edge of abc.
+ return SHAREEDGE;
+ }
+
+ // They may share a vertex or disjoint.
+ if (abcop == SHAREVERTEX) {
+ // o or p is coincident with a vertex of abc.
+ if (abcpq == SHAREVERTEX) {
+ // p is the coincident vertex.
+ assert(abcqo != SHAREVERTEX);
+ } else {
+ // o is the coincident vertex.
+ assert(abcqo == SHAREVERTEX);
+ }
+ return SHAREVERTEX;
+ }
+ if (abcpq == SHAREVERTEX) {
+ // q is the coincident vertex.
+ assert(abcqo == SHAREVERTEX);
+ return SHAREVERTEX;
+ }
+
+ // They are disjoint.
+ return DISJOINT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// iscollinear() Check if three points are approximately collinear. //
+// //
+// 'eps' is a relative error tolerance. The collinearity is determined by //
+// the value q = cos(theta), where theta is the angle between two vectors //
+// A->B and A->C. They're collinear if 1.0 - q <= epspp. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::iscollinear(REAL* A, REAL* B, REAL* C, REAL eps)
+{
+ REAL abx, aby, abz;
+ REAL acx, acy, acz;
+ REAL Lv, Lw, dd;
+ REAL d, q;
+
+ abx = A[0] - B[0];
+ aby = A[1] - B[1];
+ abz = A[2] - B[2];
+ acx = A[0] - C[0];
+ acy = A[1] - C[1];
+ acz = A[2] - C[2];
+ Lv = abx * abx + aby * aby + abz * abz;
+ Lw = acx * acx + acy * acy + acz * acz;
+ dd = abx * acx + aby * acy + abz * acz;
+
+ d = (dd * dd) / (Lv * Lw);
+ if (d > 1.0) d = 1.0; // Rounding.
+ q = 1.0 - sqrt(d); // Notice 0 < q < 1.0.
+
+ return q <= eps;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// iscoplanar() Check if four points are approximately coplanar. //
+// //
+// 'vol6' is six times of the signed volume of the tetrahedron formed by the //
+// four points. 'eps' is the relative error tolerance. The coplanarity is //
+// determined by the value: q = fabs(vol6) / L^3, where L is the average //
+// edge length of the tet. They're coplanar if q <= eps. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+iscoplanar(REAL* k, REAL* l, REAL* m, REAL* n, REAL vol6, REAL eps)
+{
+ REAL L, q;
+ REAL x, y, z;
+
+ x = k[0] - l[0];
+ y = k[1] - l[1];
+ z = k[2] - l[2];
+ L = sqrt(x * x + y * y + z * z);
+ x = l[0] - m[0];
+ y = l[1] - m[1];
+ z = l[2] - m[2];
+ L += sqrt(x * x + y * y + z * z);
+ x = m[0] - k[0];
+ y = m[1] - k[1];
+ z = m[2] - k[2];
+ L += sqrt(x * x + y * y + z * z);
+ x = k[0] - n[0];
+ y = k[1] - n[1];
+ z = k[2] - n[2];
+ L += sqrt(x * x + y * y + z * z);
+ x = l[0] - n[0];
+ y = l[1] - n[1];
+ z = l[2] - n[2];
+ L += sqrt(x * x + y * y + z * z);
+ x = m[0] - n[0];
+ y = m[1] - n[1];
+ z = m[2] - n[2];
+ L += sqrt(x * x + y * y + z * z);
+ assert(L > 0.0);
+ L /= 6.0;
+ q = fabs(vol6) / (L * L * L);
+
+ return q <= eps;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// iscospheric() Check if five points are approximately coplanar. //
+// //
+// 'vol24' is the 24 times of the signed volume of the 4-dimensional simplex //
+// formed by the five points. 'eps' is the relative tolerance. The cosphere //
+// case is determined by the value: q = fabs(vol24) / L^4, where L is the //
+// average edge length of the simplex. They're cosphere if q <= eps. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+iscospheric(REAL* k, REAL* l, REAL* m, REAL* n, REAL* o, REAL vol24, REAL eps)
+{
+ REAL L, q;
+
+ // A 4D simplex has 10 edges.
+ L = distance(k, l);
+ L += distance(l, m);
+ L += distance(m, k);
+ L += distance(k, n);
+ L += distance(l, n);
+ L += distance(m, n);
+ L += distance(k, o);
+ L += distance(l, o);
+ L += distance(m, o);
+ L += distance(n, o);
+ assert(L > 0.0);
+ L /= 10.0;
+ q = fabs(vol24) / (L * L * L * L);
+
+ return q < eps;
+}
+
+//
+// End of geometric tests
+//
+
+//
+// Begin of Geometric quantities calculators
+//
+
+// distance() computs the Euclidean distance between two points.
+inline REAL tetgenmesh::distance(REAL* p1, REAL* p2)
+{
+ return sqrt((p2[0] - p1[0]) * (p2[0] - p1[0]) +
+ (p2[1] - p1[1]) * (p2[1] - p1[1]) +
+ (p2[2] - p1[2]) * (p2[2] - p1[2]));
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// shortdistance() Returns the shortest distance from point p to a line //
+// defined by two points e1 and e2. //
+// //
+// First compute the projection length l_p of the vector v1 = p - e1 along //
+// the vector v2 = e2 - e1. Then Pythagoras' Theorem is used to compute the //
+// shortest distance. //
+// //
+// This routine allows that p is collinear with the line. In this case, the //
+// return value is zero. The two points e1 and e2 should not be identical. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+REAL tetgenmesh::shortdistance(REAL* p, REAL* e1, REAL* e2)
+{
+ REAL v1[3], v2[3];
+ REAL len, l_p;
+
+ v1[0] = e2[0] - e1[0];
+ v1[1] = e2[1] - e1[1];
+ v1[2] = e2[2] - e1[2];
+ v2[0] = p[0] - e1[0];
+ v2[1] = p[1] - e1[1];
+ v2[2] = p[2] - e1[2];
+
+ len = sqrt(dot(v1, v1));
+ assert(len != 0.0);
+ v1[0] /= len;
+ v1[1] /= len;
+ v1[2] /= len;
+ l_p = dot(v1, v2);
+
+ return sqrt(dot(v2, v2) - l_p * l_p);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// interiorangle() Return the interior angle (0 - 2 * PI) between vectors //
+// o->p1 and o->p2. //
+// //
+// 'n' is the normal of the plane containing face (o, p1, p2). The interior //
+// angle is the total angle rotating from o->p1 around n to o->p2. Exchange //
+// the position of p1 and p2 will get the complement angle of the other one. //
+// i.e., interiorangle(o, p1, p2) = 2 * PI - interiorangle(o, p2, p1). Set //
+// 'n' be NULL if you only want the interior angle between 0 - PI. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+REAL tetgenmesh::interiorangle(REAL* o, REAL* p1, REAL* p2, REAL* n)
+{
+ REAL v1[3], v2[3], np[3];
+ REAL theta, costheta, lenlen;
+ REAL ori, len1, len2;
+
+ // Get the interior angle (0 - PI) between o->p1, and o->p2.
+ v1[0] = p1[0] - o[0];
+ v1[1] = p1[1] - o[1];
+ v1[2] = p1[2] - o[2];
+ v2[0] = p2[0] - o[0];
+ v2[1] = p2[1] - o[1];
+ v2[2] = p2[2] - o[2];
+ len1 = sqrt(dot(v1, v1));
+ len2 = sqrt(dot(v2, v2));
+ lenlen = len1 * len2;
+ assert(lenlen != 0.0);
+ costheta = dot(v1, v2) / lenlen;
+ if (costheta > 1.0) {
+ costheta = 1.0; // Roundoff.
+ } else if (costheta < -1.0) {
+ costheta = -1.0; // Roundoff.
+ }
+ theta = acos(costheta);
+ if (n != NULL) {
+ // Get a point above the face (o, p1, p2);
+ np[0] = o[0] + n[0];
+ np[1] = o[1] + n[1];
+ np[2] = o[2] + n[2];
+ // Adjust theta (0 - 2 * PI).
+ ori = orient3d(p1, o, np, p2);
+ if (ori > 0.0) {
+ theta = 2 * PI - theta;
+ }
+ }
+
+ return theta;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// projpt2edge() Return the projection point from a point to an edge. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::projpt2edge(REAL* p, REAL* e1, REAL* e2, REAL* prj)
+{
+ REAL v1[3], v2[3];
+ REAL len, l_p;
+
+ v1[0] = e2[0] - e1[0];
+ v1[1] = e2[1] - e1[1];
+ v1[2] = e2[2] - e1[2];
+ v2[0] = p[0] - e1[0];
+ v2[1] = p[1] - e1[1];
+ v2[2] = p[2] - e1[2];
+
+ len = sqrt(dot(v1, v1));
+ assert(len != 0.0);
+ v1[0] /= len;
+ v1[1] /= len;
+ v1[2] /= len;
+ l_p = dot(v1, v2);
+
+ prj[0] = e1[0] + l_p * v1[0];
+ prj[1] = e1[1] + l_p * v1[1];
+ prj[2] = e1[2] + l_p * v1[2];
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// projpt2face() Return the projection point from a point to a face. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::projpt2face(REAL* p, REAL* f1, REAL* f2, REAL* f3, REAL* prj)
+{
+ REAL fnormal[3], v1[3];
+ REAL len, dist;
+
+ // Get the unit face normal.
+ facenormal(f1, f2, f3, fnormal, &len);
+ assert(len > 0.0);
+ fnormal[0] /= len;
+ fnormal[1] /= len;
+ fnormal[2] /= len;
+ // Get the vector v1 = |p - f1|.
+ v1[0] = p[0] - f1[0];
+ v1[1] = p[1] - f1[1];
+ v1[2] = p[2] - f1[2];
+ // Get the project distance.
+ dist = dot(fnormal, v1);
+ assert(fabs(dist) >= b->epsilon);
+
+ // Get the project point.
+ prj[0] = p[0] - dist * fnormal[0];
+ prj[1] = p[1] - dist * fnormal[1];
+ prj[2] = p[2] - dist * fnormal[2];
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// facenormal() Calculate the normal of a face given by three points. //
+// //
+// In general, the face normal can be calculate by the cross product of any //
+// pair of the three edge vectors. However, if the three points are nearly //
+// collinear, the rounding error may harm the result. To choose a good pair //
+// of vectors is helpful to reduce the error. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::facenormal(REAL* pa, REAL* pb, REAL* pc, REAL* n, REAL* nlen)
+{
+ REAL v1[3], v2[3];
+
+ v1[0] = pb[0] - pa[0];
+ v1[1] = pb[1] - pa[1];
+ v1[2] = pb[2] - pa[2];
+ v2[0] = pc[0] - pa[0];
+ v2[1] = pc[1] - pa[1];
+ v2[2] = pc[2] - pa[2];
+
+ cross(v1, v2, n);
+ if (nlen != (REAL *) NULL) {
+ *nlen = sqrt(dot(n, n));
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// edgeorthonormal() Return the unit normal of an edge in a given plane. //
+// //
+// The edge is from e1 to e2, the plane is defined by given an additional //
+// point op, which is non-collinear with the edge. In addition, the side of //
+// the edge in which op lies defines the positive position of the normal. //
+// //
+// Let v1 be the unit vector from e1 to e2, v2 be the unit edge vector from //
+// e1 to op, fn be the unit face normal calculated by fn = v1 x v2. Then the //
+// unit edge normal of e1e2 pointing to op is n = fn x v1. Note, we should //
+// not change the position of fn and v1, otherwise, we get the edge normal //
+// pointing to the other side of op. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::edgeorthonormal(REAL* e1, REAL* e2, REAL* op, REAL* n)
+{
+ REAL v1[3], v2[3], fn[3];
+ REAL len;
+
+ // Get the edge vector v1.
+ v1[0] = e2[0] - e1[0];
+ v1[1] = e2[1] - e1[1];
+ v1[2] = e2[2] - e1[2];
+ // Get the edge vector v2.
+ v2[0] = op[0] - e1[0];
+ v2[1] = op[1] - e1[1];
+ v2[2] = op[2] - e1[2];
+ // Get the face normal fn = v1 x v2.
+ cross(v1, v2, fn);
+ // Get the edge normal n pointing to op. n = fn x v1.
+ cross(fn, v1, n);
+ // Normalize the vector.
+ len = sqrt(dot(n, n));
+ n[0] /= len;
+ n[1] /= len;
+ n[2] /= len;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// facedihedral() Return the dihedral angle (in radian) between two //
+// adjoining faces. //
+// //
+// 'pa', 'pb' are the shared edge of these two faces, 'pc1', and 'pc2' are //
+// apexes of these two faces. Return the angle (between 0 to 2*pi) between //
+// the normal of face (pa, pb, pc1) and normal of face (pa, pb, pc2). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+REAL tetgenmesh::facedihedral(REAL* pa, REAL* pb, REAL* pc1, REAL* pc2)
+{
+ REAL n1[3], n2[3];
+ REAL n1len, n2len;
+ REAL costheta, ori;
+ REAL theta;
+
+ facenormal(pa, pb, pc1, n1, &n1len);
+ facenormal(pa, pb, pc2, n2, &n2len);
+ costheta = dot(n1, n2) / (n1len * n2len);
+ // Be careful rounding error!
+ if (costheta > 1.0) {
+ costheta = 1.0;
+ } else if (costheta < -1.0) {
+ costheta = -1.0;
+ }
+ theta = acos(costheta);
+ ori = orient3d(pa, pb, pc1, pc2);
+ if (ori > 0.0) {
+ theta = 2 * PI - theta;
+ }
+
+ return theta;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetalldihedral() Get all(six) dihedral angles in tetrahedron formed by //
+// vertices a, b, c and d. Return by array adDihed[6]. //
+// //
+// The order in which the dihedrals are assigned matters for computation of //
+// solid angles. The way they're currently set up, combining them as (0,1,2),//
+// (0,3,4), (1,3,5), (2,4,5) gives (in order) solid angles at vertices a, b, //
+// c and d. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+tetalldihedral(point pa, point pb, point pc, point pd, REAL dihed[6])
+{
+ REAL n0[3], n1[3], n2[3], n3[3];
+ REAL n0len, n1len, n2len, n3len;
+ REAL dotp;
+
+ facenormal(pc, pb, pd, n0, &n0len);
+ facenormal(pa, pc, pd, n1, &n1len);
+ facenormal(pb, pa, pd, n2, &n2len);
+ facenormal(pa, pb, pc, n3, &n3len);
+
+ n0[0] /= n0len; n0[1] /= n0len; n0[2] /= n0len;
+ n1[0] /= n1len; n1[1] /= n1len; n1[2] /= n1len;
+ n2[0] /= n2len; n2[1] /= n2len; n2[2] /= n2len;
+ n3[0] /= n3len; n3[1] /= n3len; n3[2] /= n3len;
+
+ dotp = -dot(n0, n1);
+ if (dotp > 1.) dotp = 1.;
+ else if (dotp < -1.) dotp = -1.;
+ dihed[5] = acos(dotp); // Edge CD
+
+ dotp = -dot(n0, n2);
+ if (dotp > 1.) dotp = 1.;
+ else if (dotp < -1.) dotp = -1.;
+ dihed[4] = acos(dotp); // Edge BD
+
+ dotp = -dot(n0, n3);
+ if (dotp > 1.) dotp = 1.;
+ else if (dotp < -1.) dotp = -1.;
+ dihed[3] = acos(dotp); // Edge BC
+
+ dotp = -dot(n1, n2);
+ if (dotp > 1.) dotp = 1.;
+ else if (dotp < -1.) dotp = -1.;
+ dihed[2] = acos(dotp); // Edge AD
+
+ dotp = -dot(n1, n3);
+ if (dotp > 1.) dotp = 1.;
+ else if (dotp < -1.) dotp = -1.;
+ dihed[1] = acos(dotp); // Edge AC
+
+ dotp = -dot(n2, n3);
+ if (dotp > 1.) dotp = 1.;
+ else if (dotp < -1.) dotp = -1.;
+ dihed[0] = acos(dotp); // Edge AB
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// circumsphere() Calculate the smallest circumsphere (center and radius) //
+// of the given three or four points. //
+// //
+// The circumsphere of four points (a tetrahedron) is unique if they are not //
+// degenerate. If 'pd = NULL', the smallest circumsphere of three points is //
+// the diametral sphere of the triangle if they are not degenerate. //
+// //
+// Return TRUE if the input points are not degenerate and the circumcenter //
+// and circumradius are returned in 'cent' and 'radius' respectively if they //
+// are not NULLs. Otherwise, return FALSE indicated the points are degenrate.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+circumsphere(REAL* pa, REAL* pb, REAL* pc, REAL* pd, REAL* cent, REAL* radius)
+{
+ REAL A[4][4], rhs[4], D;
+ int indx[4];
+
+ // Compute the coefficient matrix A (3x3).
+ A[0][0] = pb[0] - pa[0];
+ A[0][1] = pb[1] - pa[1];
+ A[0][2] = pb[2] - pa[2];
+ A[1][0] = pc[0] - pa[0];
+ A[1][1] = pc[1] - pa[1];
+ A[1][2] = pc[2] - pa[2];
+ if (pd != NULL) {
+ A[2][0] = pd[0] - pa[0];
+ A[2][1] = pd[1] - pa[1];
+ A[2][2] = pd[2] - pa[2];
+ } else {
+ cross(A[0], A[1], A[2]);
+ }
+
+ // Compute the right hand side vector b (3x1).
+ rhs[0] = 0.5 * dot(A[0], A[0]);
+ rhs[1] = 0.5 * dot(A[1], A[1]);
+ if (pd != NULL) {
+ rhs[2] = 0.5 * dot(A[2], A[2]);
+ } else {
+ rhs[2] = 0.0;
+ }
+
+ // Solve the 3 by 3 equations use LU decomposition with partial pivoting
+ // and backward and forward substitute..
+ if (!lu_decmp(A, 3, indx, &D, 0)) {
+ if (radius != (REAL *) NULL) *radius = 0.0;
+ return false;
+ }
+ lu_solve(A, 3, indx, rhs, 0);
+ if (cent != (REAL *) NULL) {
+ cent[0] = pa[0] + rhs[0];
+ cent[1] = pa[1] + rhs[1];
+ cent[2] = pa[2] + rhs[2];
+ }
+ if (radius != (REAL *) NULL) {
+ *radius = sqrt(rhs[0] * rhs[0] + rhs[1] * rhs[1] + rhs[2] * rhs[2]);
+ }
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// inscribedsphere() Compute the radius and center of the biggest //
+// inscribed sphere of a given tetrahedron. //
+// //
+// The tetrahedron is given by its four points, it must not be degenerate. //
+// The center and radius are returned in 'cent' and 'radius' respectively if //
+// they are not NULLs. //
+// //
+// Geometrical fact. For any simplex in d dimension, //
+// r/h1 + r/h2 + ... r/hn = 1 (n <= d + 1); //
+// where r is the radius of inscribed ball, and h is the height of each side //
+// of the simplex. The value of 'r/h' is just the barycenter coordinates of //
+// each vertex of the simplex. Therefore, we can compute the radius and //
+// center of the smallest inscribed ball as following equations: //
+// r = 1.0 / (1/h1 + 1/h2 + ... + 1/hn); (1) //
+// C = r/h1 * P1 + r/h2 * P2 + ... + r/hn * Pn; (2) //
+// where C is the vector of center, P1, P2, .. Pn are vectors of vertices. //
+// Here (2) contains n linear equations with n variables. (h, P) must be a //
+// pair, h is the height from P to its opposite face. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+inscribedsphere(REAL* pa, REAL* pb, REAL* pc, REAL* pd, REAL* cent,
+ REAL* radius)
+{
+ REAL A[4][4], rhs[4], D;
+ REAL N[3][4], H[4]; // Normals (colume vectors) and heights of each face.
+ REAL rd;
+ int indx[4], i, j;
+
+ // Compute the normals of 4 faces.
+ A[0][0] = pa[0] - pd[0];
+ A[0][1] = pa[1] - pd[1];
+ A[0][2] = pa[2] - pd[2];
+ A[1][0] = pb[0] - pd[0];
+ A[1][1] = pb[1] - pd[1];
+ A[1][2] = pb[2] - pd[2];
+ A[2][0] = pc[0] - pd[0];
+ A[2][1] = pc[1] - pd[1];
+ A[2][2] = pc[2] - pd[2];
+ // Compute inverse of matrix A, to get the 3 normals of 4 faces.
+ lu_decmp(A, 3, indx, &D, 0); // Decompose the matrix just once.
+ for (j = 0; j < 3; j++) {
+ for (i = 0; i < 3; i++) rhs[i] = 0.0;
+ rhs[j] = -1.0;
+ lu_solve(A, 3, indx, rhs, 0);
+ for (i = 0; i < 3; i++) N[i][j] = rhs[i];
+ }
+ // Compute the last normal by summing 3 computed vectors, because sum over
+ // a closed sufrace is 0.
+ N[0][3] = - N[0][0] - N[0][1] - N[0][2];
+ N[1][3] = - N[1][0] - N[1][1] - N[1][2];
+ N[2][3] = - N[2][0] - N[2][1] - N[2][2];
+ // Compute the length of normals.
+ for (i = 0; i < 4; i++) {
+ // H[i] is the inverse of height of its corresponding face.
+ H[i] = sqrt(N[0][i] * N[0][i] + N[1][i] * N[1][i] + N[2][i] * N[2][i]);
+ }
+ // Compute the radius use eq. (1).
+ rd = 1.0 / (H[0] + H[1] + H[2] + H[3]);
+ if (radius != (REAL*) NULL) *radius = rd;
+ if (cent != (REAL*) NULL) {
+ // Compute the center use eq. (2).
+ cent[0] = rd * (H[0] * pa[0] + H[1] * pb[0] + H[2] * pc[0] + H[3] * pd[0]);
+ cent[1] = rd * (H[0] * pa[1] + H[1] * pb[1] + H[2] * pc[1] + H[3] * pd[1]);
+ cent[2] = rd * (H[0] * pa[2] + H[1] * pb[2] + H[2] * pc[2] + H[3] * pd[2]);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// rotatepoint() Create a point by rotating an existing point. //
+// //
+// Create a 3D point by rotating point 'p' with an angle 'rotangle' (in arc //
+// degree) around a rotating axis given by a vector from point 'p1' to 'p2'. //
+// The rotation is according with right-hand rule, i.e., use your right-hand //
+// to grab the axis with your thumber pointing to its positive direction, //
+// your fingers indicate the rotating direction. //
+// //
+// The rotating steps are the following: //
+// 1. Translate vector 'p1->p2' to origin, M1; //
+// 2. Rotate vector around the Y-axis until it lies in the YZ plane, M2; //
+// 3. Rotate vector around the X-axis until it lies on the Z axis, M3; //
+// 4. Perform the rotation of 'p' around the z-axis, M4; //
+// 5. Undo Step 3, M5; //
+// 6. Undo Step 2, M6; //
+// 7. Undo Step 1, M7; //
+// Use matrix multiplication to combine the above sequences, we get: //
+// p0' = T * p0, where T = M7 * M6 * M5 * M4 * M3 * M2 * M1 //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::rotatepoint(REAL* p, REAL rotangle, REAL* p1, REAL* p2)
+{
+ REAL T[4][4], pp0[4], p0t[4], p2t[4];
+ REAL roty, rotx, alphaR, projlen;
+ REAL dx, dy, dz;
+
+ initm44(1, 0, 0, -p1[0],
+ 0, 1, 0, -p1[1],
+ 0, 0, 1, -p1[2],
+ 0, 0, 0, 1, T);
+ pp0[0] = p[0]; pp0[1] = p[1]; pp0[2] = p[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 1
+ pp0[0] = p2[0]; pp0[1] = p2[1]; pp0[2] = p2[2]; pp0[3] = 1.0;
+ m4xv4(p2t, T, pp0); // Step 1
+
+ // Get the rotation angle around y-axis;
+ dx = p2t[0];
+ dz = p2t[2];
+ projlen = sqrt(dx * dx + dz * dz);
+ if (projlen <= (b->epsilon * 1e-2) * longest) {
+ roty = 0;
+ } else {
+ roty = acos(dz / projlen);
+ if (dx < 0) {
+ roty = -roty;
+ }
+ }
+
+ initm44(cos(-roty), 0, sin(-roty), 0,
+ 0, 1, 0, 0,
+ -sin(-roty), 0, cos(-roty), 0,
+ 0, 0, 0, 1, T);
+ pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 2
+ pp0[0] = p2t[0]; pp0[1] = p2t[1]; pp0[2] = p2t[2]; pp0[3] = 1.0;
+ m4xv4(p2t, T, pp0); // Step 2
+
+ // Get the rotation angle around x-axis
+ dy = p2t[1];
+ dz = p2t[2];
+ projlen = sqrt(dy * dy + dz * dz);
+ if (projlen <= (b->epsilon * 1e-2) * longest) {
+ rotx = 0;
+ } else {
+ rotx = acos(dz / projlen);
+ if (dy < 0) {
+ rotx = -rotx;
+ }
+ }
+
+ initm44(1, 0, 0, 0,
+ 0, cos(rotx), -sin(rotx), 0,
+ 0, sin(rotx), cos(rotx), 0,
+ 0, 0, 0, 1, T);
+ pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 3
+ // pp0[0] = p2t[0]; pp0[1] = p2t[1]; pp0[2] = p2t[2]; pp0[3] = 1.0;
+ // m4xv4(p2t, T, pp0); // Step 3
+
+ alphaR = rotangle;
+ initm44(cos(alphaR), -sin(alphaR), 0, 0,
+ sin(alphaR), cos(alphaR), 0, 0,
+ 0, 0, 1, 0,
+ 0, 0, 0, 1, T);
+ pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 4
+
+ initm44(1, 0, 0, 0,
+ 0, cos(-rotx), -sin(-rotx), 0,
+ 0, sin(-rotx), cos(-rotx), 0,
+ 0, 0, 0, 1, T);
+ pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 5
+
+ initm44(cos(roty), 0, sin(roty), 0,
+ 0, 1, 0, 0,
+ -sin(roty), 0, cos(roty), 0,
+ 0, 0, 0, 1, T);
+ pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 6
+
+ initm44(1, 0, 0, p1[0],
+ 0, 1, 0, p1[1],
+ 0, 0, 1, p1[2],
+ 0, 0, 0, 1, T);
+ pp0[0] = p0t[0]; pp0[1] = p0t[1]; pp0[2] = p0t[2]; pp0[3] = 1.0;
+ m4xv4(p0t, T, pp0); // Step 7
+
+ p[0] = p0t[0];
+ p[1] = p0t[1];
+ p[2] = p0t[2];
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// spherelineint() 3D line sphere (or circle) intersection. //
+// //
+// The line is given by two points p1, and p2, the sphere is centered at c //
+// with radius r. This function returns a pointer array p which first index //
+// indicates the number of intersection point, followed by coordinate pairs. //
+// //
+// The following code are adapted from: http://astronomy.swin.edu.au/pbourke //
+// /geometry/sphereline. Paul Bourke pbourke@swin.edu.au //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::spherelineint(REAL* p1, REAL* p2, REAL* C, REAL R, REAL p[7])
+{
+ REAL x1, y1, z1; // P1 coordinates (point of line)
+ REAL x2, y2, z2; // P2 coordinates (point of line)
+ REAL x3, y3, z3, r; // P3 coordinates and radius (sphere)
+ REAL a, b, c, mu, i ;
+
+ x1 = p1[0]; y1 = p1[1]; z1 = p1[2];
+ x2 = p2[0]; y2 = p2[1]; z2 = p2[2];
+ x3 = C[0]; y3 = C[1]; z3 = C[2];
+ r = R;
+
+ a = (x2 - x1) * (x2 - x1)
+ + (y2 - y1) * (y2 - y1)
+ + (z2 - z1) * (z2 - z1);
+ b = 2 * ( (x2 - x1) * (x1 - x3)
+ + (y2 - y1) * (y1 - y3)
+ + (z2 - z1) * (z1 - z3) ) ;
+ c = (x3 * x3) + (y3 * y3) + (z3 * z3)
+ + (x1 * x1) + (y1 * y1) + (z1 * z1)
+ - 2 * (x3 * x1 + y3 * y1 + z3 * z1) - (r * r) ;
+ i = b * b - 4 * a * c ;
+
+ if (i < 0.0) {
+ // no intersection
+ p[0] = 0.0;
+ } else if (i == 0.0) {
+ // one intersection
+ p[0] = 1.0;
+ mu = -b / (2 * a) ;
+ p[1] = x1 + mu * (x2 - x1);
+ p[2] = y1 + mu * (y2 - y1);
+ p[3] = z1 + mu * (z2 - z1);
+ } else {
+ assert(i > 0.0);
+ // two intersections
+ p[0] = 2.0;
+ // first intersection
+ mu = (-b + sqrt((b * b) - 4 * a * c)) / (2 * a);
+ p[1] = x1 + mu * (x2 - x1);
+ p[2] = y1 + mu * (y2 - y1);
+ p[3] = z1 + mu * (z2 - z1);
+ // second intersection
+ mu = (-b - sqrt((b * b) - 4 * a * c)) / (2 * a);
+ p[4] = x1 + mu * (x2 - x1);
+ p[5] = y1 + mu * (y2 - y1);
+ p[6] = z1 + mu * (z2 - z1);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// linelineint() Calculate The shortest line between two lines in 3D. //
+// //
+// Two 3D lines generally don't intersect at a point, they may be parallel ( //
+// no intersections), or they may be coincident (infinite intersections) but //
+// most often only their projection onto a plane intersect. When they don't //
+// exactly intersect at a point they can be connected by a line segment, the //
+// shortest line segment is unique and is often considered to be their inter-//
+// section in 3D. //
+// //
+// The following code are adapted from: http://astronomy.swin.edu.au/pbourke //
+// /geometry/lineline3d. Paul Bourke pbourke@swin.edu.au //
+// //
+// Calculate the line segment PaPb that is the shortest route between two //
+// lines P1P2 and P3P4. This function returns a pointer array p which first //
+// index indicates there exists solution or not, 0 means no solution, 1 meas //
+// has solution followed by two coordinate pairs. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::linelineint(REAL *p1,REAL *p2, REAL *p3, REAL *p4, REAL p[7])
+{
+ REAL p13[3], p43[3], p21[3];
+ REAL d1343, d4321, d1321, d4343, d2121;
+ REAL numer, denom;
+ REAL mua, mub;
+
+ p13[0] = p1[0] - p3[0];
+ p13[1] = p1[1] - p3[1];
+ p13[2] = p1[2] - p3[2];
+ p43[0] = p4[0] - p3[0];
+ p43[1] = p4[1] - p3[1];
+ p43[2] = p4[2] - p3[2];
+ if (p43[0] == 0.0 && p43[1] == 0.0 && p43[2] == 0.0) {
+ p[0] = 0.0;
+ return;
+ }
+
+ p21[0] = p2[0] - p1[0];
+ p21[1] = p2[1] - p1[1];
+ p21[2] = p2[2] - p1[2];
+ if (p21[0] == 0.0 && p21[1] == 0.0 && p21[2] == 0.0) {
+ p[0] = 0.0;
+ return;
+ }
+
+ d1343 = p13[0] * p43[0] + p13[1] * p43[1] + p13[2] * p43[2];
+ d4321 = p43[0] * p21[0] + p43[1] * p21[1] + p43[2] * p21[2];
+ d1321 = p13[0] * p21[0] + p13[1] * p21[1] + p13[2] * p21[2];
+ d4343 = p43[0] * p43[0] + p43[1] * p43[1] + p43[2] * p43[2];
+ d2121 = p21[0] * p21[0] + p21[1] * p21[1] + p21[2] * p21[2];
+
+ denom = d2121 * d4343 - d4321 * d4321;
+ if (denom == 0.0) {
+ p[0] = 0.0;
+ return;
+ }
+ numer = d1343 * d4321 - d1321 * d4343;
+ mua = numer / denom;
+ mub = (d1343 + d4321 * mua) / d4343;
+
+ p[0] = 1.0;
+ p[1] = p1[0] + mua * p21[0];
+ p[2] = p1[1] + mua * p21[1];
+ p[3] = p1[2] + mua * p21[2];
+ p[4] = p3[0] + mub * p43[0];
+ p[5] = p3[1] + mub * p43[1];
+ p[6] = p3[2] + mub * p43[2];
+}
+
+//
+// End of Geometric quantities calculators
+//
+
+//
+// Begin of memory management routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// dummyinit() Initialize the tetrahedron that fills "outer space" and //
+// the omnipresent subface. //
+// //
+// The tetrahedron that fills "outer space" called 'dummytet', is pointed to //
+// by every tetrahedron and subface on a boundary (be it outer or inner) of //
+// the tetrahedralization. Also, 'dummytet' points to one of the tetrahedron //
+// on the convex hull(until the holes and concavities are carved), making it //
+// possible to find a starting tetrahedron for point location. //
+// //
+// The omnipresent subface,'dummysh', is pointed to by every tetrahedron or //
+// subface that doesn't have a full complement of real subface to point to. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::dummyinit(int tetwords, int shwords)
+{
+ unsigned long alignptr;
+
+ // Set up 'dummytet', the 'tetrahedron' that occupies "outer space".
+ dummytetbase = (tetrahedron *) new char[tetwords * sizeof(tetrahedron)
+ + tetrahedrons->alignbytes];
+ // Align 'dummytet' on a 'tetrahedrons->alignbytes'-byte boundary.
+ alignptr = (unsigned long) dummytetbase;
+ dummytet = (tetrahedron *)
+ (alignptr + (unsigned long) tetrahedrons->alignbytes
+ - (alignptr % (unsigned long) tetrahedrons->alignbytes));
+ // Initialize the four adjoining tetrahedra to be "outer space". These
+ // will eventually be changed by various bonding operations, but their
+ // values don't really matter, as long as they can legally be
+ // dereferenced.
+ dummytet[0] = (tetrahedron) dummytet;
+ dummytet[1] = (tetrahedron) dummytet;
+ dummytet[2] = (tetrahedron) dummytet;
+ dummytet[3] = (tetrahedron) dummytet;
+ // Four null vertex points.
+ dummytet[4] = (tetrahedron) NULL;
+ dummytet[5] = (tetrahedron) NULL;
+ dummytet[6] = (tetrahedron) NULL;
+ dummytet[7] = (tetrahedron) NULL;
+
+ if (b->useshelles) {
+ // Set up 'dummysh', the omnipresent "subface" pointed to by any
+ // tetrahedron side or subface end that isn't attached to a real
+ // subface.
+ dummyshbase = (shellface *) new char[shwords * sizeof(shellface)
+ + subfaces->alignbytes];
+ // Align 'dummysh' on a 'subfaces->alignbytes'-byte boundary.
+ alignptr = (unsigned long) dummyshbase;
+ dummysh = (shellface *)
+ (alignptr + (unsigned long) subfaces->alignbytes
+ - (alignptr % (unsigned long) subfaces->alignbytes));
+ // Initialize the three adjoining subfaces to be the omnipresent
+ // subface. These will eventually be changed by various bonding
+ // operations, but their values don't really matter, as long as they
+ // can legally be dereferenced.
+ dummysh[0] = (shellface) dummysh;
+ dummysh[1] = (shellface) dummysh;
+ dummysh[2] = (shellface) dummysh;
+ // Three null vertex points.
+ dummysh[3] = (shellface) NULL;
+ dummysh[4] = (shellface) NULL;
+ dummysh[5] = (shellface) NULL;
+ // Initialize the two adjoining tetrahedra to be "outer space".
+ dummysh[6] = (shellface) dummytet;
+ dummysh[7] = (shellface) dummytet;
+ // Initialize the three adjoining subsegments to be "out boundary".
+ dummysh[8] = (shellface) dummysh;
+ dummysh[9] = (shellface) dummysh;
+ dummysh[10] = (shellface) dummysh;
+ // Initialize the pointer to badface structure.
+ dummysh[11] = (shellface) NULL;
+ // Initialize the four adjoining subfaces of 'dummytet' to be the
+ // omnipresent subface.
+ dummytet[8 ] = (tetrahedron) dummysh;
+ dummytet[9 ] = (tetrahedron) dummysh;
+ dummytet[10] = (tetrahedron) dummysh;
+ dummytet[11] = (tetrahedron) dummysh;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// initializepools() Calculate the sizes of the point, tetrahedron, and //
+// subface. Initialize their memory pools. //
+// //
+// This routine also computes the indices 'pointmarkindex', 'point2simindex',//
+// and 'point2pbcptindex' used to find values within each point; computes //
+// indices 'highorderindex', 'elemattribindex', and 'volumeboundindex' used //
+// to find values within each tetrahedron. //
+// //
+// There are two types of boundary elements, which are subfaces and subsegs, //
+// they are stored in seperate pools. However, the data structures of them //
+// are the same. A subsegment can be regarded as a degenerate subface, i.e.,//
+// one of its three corners is not used. We set the apex of it be 'NULL' to //
+// distinguish it's a subsegment. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::initializepools()
+{
+ enum wordtype wtype;
+ int pointsize, elesize, shsize;
+
+ // Default checkpbc = 0;
+ if ((b->plc || b->refine) && (in->pbcgrouplist != NULL)) {
+ checkpbcs = 1;
+ }
+ // Default varconstraint = 0;
+ if (b->quality && (in->nodeconstraintlist || in->segmentconstraintlist ||
+ in->facetconstraintlist)) {
+ varconstraint = 1;
+ }
+
+ // The index within each point at which the constraint is found, where the
+ // index is measured in REALs.
+ edgeboundindex = 3 + in->numberofpointattributes;
+ // The index within each point at which a element pointer is found. Ensure
+ // the index is aligned to a sizeof(tetrahedron)-byte address.
+ point2simindex = ((edgeboundindex + varconstraint) * sizeof(REAL) +
+ sizeof(tetrahedron) - 1) / sizeof(tetrahedron);
+ if (b->plc || b->refine) {
+ // Increase the point size by one pointer points to a simplex, which
+ // may be one of the followings:
+ // - a tetrahedron containing it, read by point2tet();
+ // - a subface containing it, read by point2sh();
+ // - a (sharp) subsegment it relates, read by point2sh();
+ // - a (duplicated) point of it, read by point2pt();
+ // Optionally, increase the point size one pointer points another
+ // point (its parent, read by point2ppt()) when b->quality == 1.
+ pointsize = (point2simindex + 1 + b->quality) * sizeof(tetrahedron);
+ // The index within each point at which a pbc point is found.
+ point2pbcptindex = (pointsize + sizeof(int) - 1) / sizeof(int);
+ // Increase one pointer points to another point (its corresponding pbc
+ // point, read by point2pbcpt()) when checkpbcs == 1.
+ pointsize = (point2pbcptindex + checkpbcs) * sizeof(int);
+ } else {
+ pointsize = point2simindex * sizeof(tetrahedron);
+ }
+ // The index within each point at which the boundary marker is found,
+ // Ensure the point marker is aligned to a sizeof(int)-byte address.
+ pointmarkindex = (pointsize + sizeof(int) - 1) / sizeof(int);
+ // Now point size is the ints (inidcated by pointmarkindex) plus:
+ // - an integer for boundary marker;
+ // - an integer for vertex type;
+ pointsize = (pointmarkindex + 2) * sizeof(int);
+ // Decide the wordtype used in vertex pool.
+ wtype = (sizeof(REAL) >= sizeof(tetrahedron)) ? FLOATINGPOINT : POINTER;
+ // Initialize the pool of vertices.
+ points = new memorypool(pointsize, VERPERBLOCK, wtype, 0);
+
+ // The number of bytes occupied by a tetrahedron. There are four pointers
+ // to other tetrahedra, four pointers to corners, and possibly four
+ // pointers to subfaces.
+ elesize = (8 + b->useshelles * 4) * sizeof(tetrahedron);
+ // The index within each element at which its attributes are found, where
+ // the index is measured in REALs.
+ elemattribindex = (elesize + sizeof(REAL) - 1) / sizeof(REAL);
+ // The index within each element at which the maximum voulme bound is
+ // found, where the index is measured in REALs. Note that if the
+ // `b->regionattrib' flag is set, an additional attribute will be added.
+ volumeboundindex = elemattribindex + in->numberoftetrahedronattributes
+ + b->regionattrib;
+ // If element attributes or an constraint are needed, increase the number
+ // of bytes occupied by an element.
+ if (b->varvolume) {
+ elesize = (volumeboundindex + 1) * sizeof(REAL);
+ } else if (in->numberoftetrahedronattributes + b->regionattrib > 0) {
+ elesize = volumeboundindex * sizeof(REAL);
+ }
+ // If the high order elements are required (-o2 switch is used), an
+ // additional pointer pointed to the list of extra nodes is allocated
+ // for each element.
+ if (b->order == 2) {
+ highorderindex = (elesize + sizeof(int) - 1) / sizeof(int);
+ elesize = (highorderindex + 1) * sizeof(int);
+ }
+ // If element neighbor graph is requested, make sure there's room to
+ // store an integer index in each element. This integer index can
+ // occupy the same space as the subface pointers.
+ if (b->neighout && (elesize <= 8 * sizeof(tetrahedron))) {
+ elesize = 8 * sizeof(tetrahedron) + sizeof(int);
+ }
+ // Having determined the memory size of an element, initialize the pool.
+ tetrahedrons = new memorypool(elesize, ELEPERBLOCK, POINTER, 8);
+
+ if (b->useshelles) {
+ // The number of bytes occupied by a subface. The list of pointers
+ // stored in a subface are: three to other subfaces, three to corners,
+ // three to subsegments, two to tetrahedra, and one to a badface.
+ shsize = 12 * sizeof(shellface);
+ // The index within each subface at which the maximum area bound is
+ // found, where the index is measured in REALs.
+ areaboundindex = (shsize + sizeof(REAL) - 1) / sizeof(REAL);
+ // If -q switch is in use, increase the number of bytes occupied by
+ // a subface for saving maximum area bound.
+ if (b->quality && varconstraint) {
+ shsize = (areaboundindex + 1) * sizeof(REAL);
+ } else {
+ shsize = areaboundindex * sizeof(REAL);
+ }
+ // The index within subface at which the facet marker is found. Ensure
+ // the marker is aligned to a sizeof(int)-byte address.
+ shmarkindex = (shsize + sizeof(int) - 1) / sizeof(int);
+ // Increase the number of bytes by two or three integers, one for facet
+ // marker, one for shellface type, and optionally one for pbc group.
+ shsize = (shmarkindex + 2 + checkpbcs) * sizeof(int);
+ // Initialize the pool of subfaces. Each subface record is eight-byte
+ // aligned so it has room to store an edge version (from 0 to 5) in
+ // the least three bits.
+ subfaces = new memorypool(shsize, SUBPERBLOCK, POINTER, 8);
+ // Initialize the pool of subsegments. The subsegment's record is same
+ // with subface.
+ subsegs = new memorypool(shsize, SUBPERBLOCK, POINTER, 8);
+ // Initialize the "outer space" tetrahedron and omnipresent subface.
+ dummyinit(tetrahedrons->itemwords, subfaces->itemwords);
+ } else {
+ // Initialize the "outer space" tetrahedron.
+ dummyinit(tetrahedrons->itemwords, 0);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetrahedrondealloc() Deallocate space for a tet., marking it dead. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tetrahedrondealloc(tetrahedron *dyingtetrahedron)
+{
+ // Set tetrahedron's vertices to NULL. This makes it possible to detect
+ // dead tetrahedra when traversing the list of all tetrahedra.
+ dyingtetrahedron[4] = (tetrahedron) NULL;
+ dyingtetrahedron[5] = (tetrahedron) NULL;
+ dyingtetrahedron[6] = (tetrahedron) NULL;
+ dyingtetrahedron[7] = (tetrahedron) NULL;
+ tetrahedrons->dealloc((void *) dyingtetrahedron);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetrahedrontraverse() Traverse the tetrahedra, skipping dead ones. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::tetrahedron* tetgenmesh::tetrahedrontraverse()
+{
+ tetrahedron *newtetrahedron;
+
+ do {
+ newtetrahedron = (tetrahedron *) tetrahedrons->traverse();
+ if (newtetrahedron == (tetrahedron *) NULL) {
+ return (tetrahedron *) NULL;
+ }
+ } while (newtetrahedron[7] == (tetrahedron) NULL); // Skip dead ones.
+ return newtetrahedron;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// shellfacedealloc() Deallocate space for a shellface, marking it dead. //
+// Used both for dealloc a subface and subsegment. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::shellfacedealloc(memorypool *pool, shellface *dyingsh)
+{
+ // Set shellface's vertices to NULL. This makes it possible to detect dead
+ // shellfaces when traversing the list of all shellfaces.
+ dyingsh[3] = (shellface) NULL;
+ dyingsh[4] = (shellface) NULL;
+ dyingsh[5] = (shellface) NULL;
+ pool->dealloc((void *) dyingsh);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// shellfacetraverse() Traverse the subfaces, skipping dead ones. Used //
+// for both subfaces and subsegments pool traverse. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::shellface* tetgenmesh::shellfacetraverse(memorypool *pool)
+{
+ shellface *newshellface;
+
+ do {
+ newshellface = (shellface *) pool->traverse();
+ if (newshellface == (shellface *) NULL) {
+ return (shellface *) NULL;
+ }
+ } while (newshellface[3] == (shellface) NULL); // Skip dead ones.
+ return newshellface;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// badfacedealloc() Deallocate space for a badface, marking it dead. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::badfacedealloc(memorypool *pool, badface *dying)
+{
+ // Set badface's forg to NULL. This makes it possible to detect dead
+ // ones when traversing the list of all items.
+ dying->forg = (point) NULL;
+ pool->dealloc((void *) dying);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// badfacetraverse() Traverse the pools, skipping dead ones. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::badface* tetgenmesh::badfacetraverse(memorypool *pool)
+{
+ badface *newsh;
+
+ do {
+ newsh = (badface *) pool->traverse();
+ if (newsh == (badface *) NULL) {
+ return (badface *) NULL;
+ }
+ } while (newsh->forg == (point) NULL); // Skip dead ones.
+ return newsh;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// pointdealloc() Deallocate space for a point, marking it dead. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::pointdealloc(point dyingpoint)
+{
+ // Mark the point as dead. This makes it possible to detect dead points
+ // when traversing the list of all points.
+ setpointtype(dyingpoint, DEADVERTEX);
+ points->dealloc((void *) dyingpoint);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// pointtraverse() Traverse the points, skipping dead ones. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::point tetgenmesh::pointtraverse()
+{
+ point newpoint;
+
+ do {
+ newpoint = (point) points->traverse();
+ if (newpoint == (point) NULL) {
+ return (point) NULL;
+ }
+ } while (pointtype(newpoint) == DEADVERTEX); // Skip dead ones.
+ return newpoint;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// maketetrahedron() Create a new tetrahedron. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::maketetrahedron(triface *newtet)
+{
+ newtet->tet = (tetrahedron *) tetrahedrons->alloc();
+ // Initialize the four adjoining tetrahedra to be "outer space".
+ newtet->tet[0] = (tetrahedron) dummytet;
+ newtet->tet[1] = (tetrahedron) dummytet;
+ newtet->tet[2] = (tetrahedron) dummytet;
+ newtet->tet[3] = (tetrahedron) dummytet;
+ // Four NULL vertices.
+ newtet->tet[4] = (tetrahedron) NULL;
+ newtet->tet[5] = (tetrahedron) NULL;
+ newtet->tet[6] = (tetrahedron) NULL;
+ newtet->tet[7] = (tetrahedron) NULL;
+ // Initialize the four adjoining subfaces to be the omnipresent subface.
+ if (b->useshelles) {
+ newtet->tet[8 ] = (tetrahedron) dummysh;
+ newtet->tet[9 ] = (tetrahedron) dummysh;
+ newtet->tet[10] = (tetrahedron) dummysh;
+ newtet->tet[11] = (tetrahedron) dummysh;
+ }
+ for (int i = 0; i < in->numberoftetrahedronattributes; i++) {
+ setelemattribute(newtet->tet, i, 0.0);
+ }
+ if (b->varvolume) {
+ setvolumebound(newtet->tet, -1.0);
+ }
+ // Initialize the location and version to be Zero.
+ newtet->loc = 0;
+ newtet->ver = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// makeshellface() Create a new shellface with version zero. Used for //
+// both subfaces and seusegments. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::makeshellface(memorypool *pool, face *newface)
+{
+ newface->sh = (shellface *) pool->alloc();
+ //Initialize the three adjoining subfaces to be the omnipresent subface.
+ newface->sh[0] = (shellface) dummysh;
+ newface->sh[1] = (shellface) dummysh;
+ newface->sh[2] = (shellface) dummysh;
+ // Three NULL vertices.
+ newface->sh[3] = (shellface) NULL;
+ newface->sh[4] = (shellface) NULL;
+ newface->sh[5] = (shellface) NULL;
+ // Initialize the two adjoining tetrahedra to be "outer space".
+ newface->sh[6] = (shellface) dummytet;
+ newface->sh[7] = (shellface) dummytet;
+ // Initialize the three adjoining subsegments to be the omnipresent
+ // subsegments.
+ newface->sh [8] = (shellface) dummysh;
+ newface->sh [9] = (shellface) dummysh;
+ newface->sh[10] = (shellface) dummysh;
+ // Initialize the pointer to badface structure.
+ newface->sh[11] = (shellface) NULL;
+ if (b->quality && varconstraint) {
+ // Initialize the maximum area bound.
+ setareabound(*newface, 0.0);
+ }
+ // Set the boundary marker to zero.
+ setshellmark(*newface, 0);
+ // Set the type.
+ setshelltype(*newface, NSHARPNSKINNY);
+ if (checkpbcs) {
+ // Set the pbcgroup be ivalid.
+ setshellpbcgroup(*newface, -1);
+ }
+ // Initialize the version to be Zero.
+ newface->shver = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// makepoint() Create a new point. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::makepoint(point* pnewpoint)
+{
+ int ptmark, i;
+
+ *pnewpoint = (point) points->alloc();
+ // Initialize three coordinates.
+ (*pnewpoint)[0] = 0.0;
+ (*pnewpoint)[1] = 0.0;
+ (*pnewpoint)[2] = 0.0;
+ // Initialize the list of user-defined attributes.
+ for (i = 0; i < in->numberofpointattributes; i++) {
+ (*pnewpoint)[3 + i] = 0.0;
+ }
+ if (b->plc || b->refine) {
+ // Initialize the point-to-tetrahedron filed.
+ setpoint2tet(*pnewpoint, NULL);
+ if (b->quality) {
+ // Initialize the other pointer to its parent point.
+ setpoint2ppt(*pnewpoint, NULL);
+ }
+ if (b->quality && varconstraint) {
+ // Initialize the maximum edge length bound.
+ setedgebound(*pnewpoint, 0.0);
+ }
+ if (checkpbcs) {
+ // Initialize the other pointer to its pbc point.
+ setpoint2pbcpt(*pnewpoint, NULL);
+ }
+ }
+ // Initialize the point marker (starting from in->firstnumber).
+ ptmark = (int) points->items - (in->firstnumber == 1 ? 0 : 1);
+ setpointmark(*pnewpoint, ptmark);
+ // Initialize the point type be UNUSEDVERTEX.
+ setpointtype(*pnewpoint, UNUSEDVERTEX);
+}
+
+//
+// End of memory management routines
+//
+
+//
+// Begin of point location routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// randomnation() Generate a random number between 0 and 'choices' - 1. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+unsigned long tetgenmesh::randomnation(unsigned int choices)
+{
+ randomseed = (randomseed * 1366l + 150889l) % 714025l;
+ return randomseed / (714025l / choices + 1);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// distance2() Returns the square "distance" of a tetrahedron to point p. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+REAL tetgenmesh::distance2(tetrahedron* tetptr, point p)
+{
+ point p1, p2, p3, p4;
+ REAL dx, dy, dz;
+
+ p1 = (point) tetptr[4];
+ p2 = (point) tetptr[5];
+ p3 = (point) tetptr[6];
+ p4 = (point) tetptr[7];
+
+ dx = p[0] - 0.25 * (p1[0] + p2[0] + p3[0] + p4[0]);
+ dy = p[1] - 0.25 * (p1[1] + p2[1] + p3[1] + p4[1]);
+ dz = p[2] - 0.25 * (p1[2] + p2[2] + p3[2] + p4[2]);
+
+ return dx * dx + dy * dy + dz * dz;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// preciselocate() Find a simplex containing a given point. //
+// //
+// This routine implements the simple Walk-through point location algorithm. //
+// Begins its search from 'searchtet', assume there is a line segment L from //
+// a vertex of 'searchtet' to the query point 'searchpt', and simply walk //
+// towards 'searchpt' by traversing all faces intersected by L. //
+// //
+// On completion, 'searchtet' is a tetrahedron that contains 'searchpt'. The //
+// returned value indicates one of the following cases: //
+// - Returns ONVERTEX if the point lies on an existing vertex. 'searchtet' //
+// is a handle whose origin is the existing vertex. //
+// - Returns ONEDGE if the point lies on a mesh edge. 'searchtet' is a //
+// handle whose primary edge is the edge on which the point lies. //
+// - Returns ONFACE if the point lies strictly within a face. 'searchtet' //
+// is a handle whose primary face is the face on which the point lies. //
+// - Returns INTETRAHEDRON if the point lies strictly in a tetrahededron. //
+// 'searchtet' is a handle on the tetrahedron that contains the point. //
+// - Returns OUTSIDE if the point lies outside the mesh. 'searchtet' is a //
+// handle whose location is the face the point is to 'above' of. //
+// //
+// WARNING: This routine is designed for convex triangulations, and will not //
+// generally work after the holes and concavities have been carved. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+preciselocate(point searchpt, triface* searchtet)
+{
+ triface backtracetet;
+ triface walkthroface;
+ point forg, fdest, fapex, toppo;
+ REAL ori1, ori2, ori3, ori4;
+ long tetnumber;
+ int side;
+
+ // 'searchtet' should be a valid tetrahedron.
+ if (searchtet->tet == dummytet) {
+ searchtet->loc = 0;
+ symself(*searchtet);
+ assert(searchtet->tet != dummytet);
+ }
+ assert(!isdead(searchtet));
+
+ searchtet->ver = 0; // Keep in CCW edge ring.
+ // Find a face of 'searchtet' such that the 'searchpt' lies strictly
+ // above it. Such face should always exist.
+ for (searchtet->loc = 0; searchtet->loc < 4; searchtet->loc++) {
+ forg = org(*searchtet);
+ fdest = dest(*searchtet);
+ fapex = apex(*searchtet);
+ ori1 = orient3d(forg, fdest, fapex, searchpt);
+ if (ori1 < 0.0) break;
+ }
+ assert(searchtet->loc < 4);
+
+ // Define 'tetnumber' for exit the loop when it's running endless.
+ tetnumber = 0l;
+ while (tetnumber <= tetrahedrons->items) {
+ // Check if we are reaching the boundary of the triangulation.
+ if (searchtet->tet == dummytet) {
+ *searchtet = backtracetet;
+ return OUTSIDE;
+ }
+ // Initialize the face for returning the walk-through face.
+ walkthroface.tet = (tetrahedron *) NULL;
+ // Adjust the edge ring, so that 'ori1 < 0.0' holds.
+ searchtet->ver = 0;
+ // 'toppo' remains unchange for the following orientation tests.
+ toppo = oppo(*searchtet);
+ // Check the three sides of 'searchtet' to find the face through which
+ // we can walk next.
+ for (side = 0; side < 3; side++) {
+ forg = org(*searchtet);
+ fdest = dest(*searchtet);
+ ori2 = orient3d(forg, fdest, toppo, searchpt);
+ if (ori2 == 0.0) {
+ // They are coplanar, check if 'searchpt' lies inside, or on an edge,
+ // or coindice with a vertex of face (forg, fdest, toppo).
+ fapex = apex(*searchtet);
+ ori3 = orient3d(fdest, fapex, toppo, searchpt);
+ if (ori3 < 0.0) {
+ // Outside the face (fdest, fapex, toppo), walk through it.
+ enextself(*searchtet);
+ fnext(*searchtet, walkthroface);
+ break;
+ }
+ ori4 = orient3d(fapex, forg, toppo, searchpt);
+ if (ori4 < 0.0) {
+ // Outside the face (fapex, forg, toppo), walk through it.
+ enext2self(*searchtet);
+ fnext(*searchtet, walkthroface);
+ break;
+ }
+ // Remember, ori1 < 0.0, which means 'searchpt' will not on edge
+ // (forg, fdest) or on vertex forg or fdest.
+ assert(ori1 < 0.0);
+ // The rest possible cases are:
+ // (1) 'searchpt' lies on edge (fdest, toppo);
+ // (2) 'searchpt' lies on edge (toppo, forg);
+ // (3) 'searchpt' coincident with toppo;
+ // (4) 'searchpt' lies inside face (forg, fdest, toppo).
+ fnextself(*searchtet);
+ if (ori3 == 0.0) {
+ if (ori4 == 0.0) {
+ // Case (4).
+ enext2self(*searchtet);
+ return ONVERTEX;
+ } else {
+ // Case (1).
+ enextself(*searchtet);
+ return ONEDGE;
+ }
+ }
+ if (ori4 == 0.0) {
+ // Case (2).
+ enext2self(*searchtet);
+ return ONEDGE;
+ }
+ // Case (4).
+ return ONFACE;
+ } else if (ori2 < 0.0) {
+ // Outside the face (forg, fdest, toppo), walk through it.
+ fnext(*searchtet, walkthroface);
+ break;
+ }
+ // Go to check next side.
+ enextself(*searchtet);
+ }
+ if (side >= 3) {
+ // Found! Inside tetrahedron.
+ return INTETRAHEDRON;
+ }
+ // We walk through the face 'walkthroface' and continue the searching.
+ assert(walkthroface.tet != (tetrahedron *) NULL);
+ // Store the face handle in 'backtracetet' before we take the real walk.
+ // So we are able to restore the handle to 'searchtet' if we are
+ // reaching the outer boundary.
+ backtracetet = walkthroface;
+ sym(walkthroface, *searchtet);
+ tetnumber++;
+ }
+
+ // Should never be here.
+ // printf("Internal error in preciselocate(): Point location failed.\n");
+ // internalerror();
+ return OUTSIDE;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// locate() Find a simplex containing a given point. //
+// //
+// This routine implements Muecke's Jump-and-walk point location algorithm. //
+// It improves the simple walk-through by "jumping" to a good starting point //
+// via random sampling. Searching begins from one of handles: the input //
+// 'searchtet', a recently encountered tetrahedron 'recenttet', or from one //
+// chosen from a random sample. The choice is made by determining which one //
+// 's barycenter is closest to the point we are searcing for. Having chosen //
+// the starting tetrahedron, the simple Walk-through algorithm is used to do //
+// the real walking. //
+// //
+// The return value indicates the location of the 'searchpt' (INTETRAHEDRON, //
+// or ONFACE, ...). 'searchtet' is adjusted to a tetrahedron corresponding //
+// to that value. See the introduction part of preciselocate() for detail. //
+// //
+// WARNING: This routine is designed for convex triangulations, and will not //
+// generally work after the holes and concavities have been carved. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+locate(point searchpt, triface *searchtet)
+{
+ tetrahedron *firsttet, *tetptr;
+ void **sampleblock;
+ long sampleblocks, samplesperblock, samplenum;
+ long tetblocks, i, j;
+ unsigned long alignptr;
+ REAL searchdist, dist;
+
+ // 'searchtet' should be a valid tetrahedron.
+ if (isdead(searchtet)) {
+ searchtet->tet = dummytet;
+ }
+ if (searchtet->tet == dummytet) {
+ // This is an 'Outer Space' handle, get a hull tetrahedron.
+ searchtet->loc = 0;
+ symself(*searchtet);
+ }
+ assert(!isdead(searchtet));
+
+ // Get the distance from the suggested starting tet to the point we seek.
+ searchdist = distance2(searchtet->tet, searchpt);
+
+ // If a recently encountered tetrahedron has been recorded and has not
+ // been deallocated, test it as a good starting point.
+ if (!isdead(&recenttet) && (recenttet.tet != searchtet->tet)) {
+ dist = distance2(recenttet.tet, searchpt);
+ if (dist < searchdist) {
+ *searchtet = recenttet;
+ searchdist = dist;
+ }
+ }
+
+ // Select "good" candidate using k random samples, taking the closest one.
+ // The number of random samples taken is proportional to the cube root
+ // of the number of tetrahedra in the mesh. The next bit of code assumes
+ // that the number of tetrahedra increases monotonically.
+ while (SAMPLEFACTOR * samples * samples * samples < tetrahedrons->items) {
+ samples++;
+ }
+ // Find how much blocks in current tet pool.
+ tetblocks = (tetrahedrons->maxitems + ELEPERBLOCK - 1) / ELEPERBLOCK;
+ // Find the average samles per block. Each block at least have 1 sample.
+ samplesperblock = 1 + (samples / tetblocks);
+ sampleblocks = samples / samplesperblock;
+ sampleblock = tetrahedrons->firstblock;
+ for (i = 0; i < sampleblocks; i++) {
+ alignptr = (unsigned long) (sampleblock + 1);
+ firsttet = (tetrahedron *)
+ (alignptr + (unsigned long) tetrahedrons->alignbytes
+ - (alignptr % (unsigned long) tetrahedrons->alignbytes));
+ for (j = 0; j < samplesperblock; j++) {
+ if (i == tetblocks - 1) {
+ // This is the last block.
+ samplenum = randomnation((int)
+ (tetrahedrons->maxitems - (i * ELEPERBLOCK)));
+ } else {
+ samplenum = randomnation(ELEPERBLOCK);
+ }
+ tetptr = (tetrahedron *)
+ (firsttet + (samplenum * tetrahedrons->itemwords));
+ if (tetptr[4] != (tetrahedron) NULL) {
+ dist = distance2(tetptr, searchpt);
+ if (dist < searchdist) {
+ searchtet->tet = tetptr;
+ searchdist = dist;
+ }
+ }
+ }
+ sampleblock = (void **) *sampleblock;
+ }
+
+ // Call simple walk-through to locate the point.
+ return preciselocate(searchpt, searchtet);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// adjustlocate() Adjust the precise location of a vertex. //
+// //
+// 'precise' is the value returned from preciselocate(). It indicates the //
+// exact location of the point 'searchpt' with respect to the tetrahedron //
+// 'searchtet'. 'epspp' is a given relative tolerance. //
+// //
+// This routine re-evaluates the orientations of searchpt with respect to //
+// the four sides of searchtet. Detects the coplanarities by additinal tests //
+// which are based on the given tolerance. If 'precise' is ONFACE or ONEDGE, //
+// we can save one or two orientation tests. //
+// //
+// The return value indicates the location of the 'searchpt' (INTETRAHEDRON, //
+// or ONFACE, ...). 'searchtet' is adjusted to a tetrahedron corresponding //
+// to that value. See the introduction part of preciselocate() for detail. //
+// //
+// WARNING: This routine detect degenerate case using relative tolerance. //
+// It is better used after locate() or preciselocate(). For general inputs, //
+// it may not able to tell the correct location. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+adjustlocate(point searchpt, triface* searchtet, enum locateresult precise,
+ REAL epspp)
+{
+ point torg, tdest, tapex, toppo;
+ REAL s1, s2, s3, s4;
+
+ // For the given 'searchtet', the orientations tests are:
+ // s1: (tdest, torg, tapex, searchpt);
+ // s2: (torg, tdest, toppo, searchpt);
+ // s3: (tdest, tapex, toppo, searchpt);
+ // s4: (tapex, torg, toppo, searchpt);
+ adjustedgering(*searchtet, CCW);
+ torg = org(*searchtet);
+ tdest = dest(*searchtet);
+ tapex = apex(*searchtet);
+ toppo = oppo(*searchtet);
+
+ switch (precise) {
+ case ONVERTEX:
+ // This case we don't need do any further test.
+ return ONVERTEX;
+ case ONEDGE:
+ // (torg, tdest);
+ s1 = 0.0;
+ s2 = 0.0;
+ break;
+ case ONFACE:
+ // (tdest, torg, tapex);
+ s1 = 0.0;
+ s2 = orient3d(torg, tdest, toppo, searchpt);
+ break;
+ default: // INTETRAHEDRON or OUTSIDE
+ s1 = orient3d(tdest, torg, tapex, searchpt);
+ s2 = orient3d(torg, tdest, toppo, searchpt);
+ }
+
+ if (s1 != 0.0) {
+ if (iscoplanar(tdest, torg, tapex, searchpt, s1, epspp)) {
+ s1 = 0.0;
+ }
+ }
+ if (s1 < 0.0) {
+ return OUTSIDE;
+ }
+
+ if (s2 != 0.0) {
+ if (iscoplanar(torg, tdest, toppo, searchpt, s2, epspp)) {
+ s2 = 0.0;
+ }
+ }
+ if (s2 < 0.0) {
+ fnextself(*searchtet);
+ return OUTSIDE;
+ }
+
+ s3 = orient3d(tdest, tapex, toppo, searchpt);
+ if (s3 != 0.0) {
+ if (iscoplanar(tdest, tapex, toppo, searchpt, s3, epspp)) {
+ s3 = 0.0;
+ }
+ }
+ if (s3 < 0.0) {
+ enextfnextself(*searchtet);
+ return OUTSIDE;
+ }
+
+ s4 = orient3d(tapex, torg, toppo, searchpt);
+ if (s4 != 0.0) {
+ if (iscoplanar(tapex, torg, toppo, searchpt, s4, epspp)) {
+ s4 = 0.0;
+ }
+ }
+ if (s4 < 0.0) {
+ enext2fnextself(*searchtet);
+ return OUTSIDE;
+ }
+
+ // Determine degenerate cases.
+ if (s1 == 0.0) {
+ if (s2 == 0.0) {
+ if (s3 == 0.0) {
+ // On tdest.
+ enextself(*searchtet);
+ return ONVERTEX;
+ }
+ if (s4 == 0.0) {
+ // On torg.
+ return ONVERTEX;
+ }
+ // On edge (torg, tdest).
+ return ONEDGE;
+ }
+ if (s3 == 0.0) {
+ if (s4 == 0.0) {
+ // On tapex.
+ enext2self(*searchtet);
+ return ONVERTEX;
+ }
+ // On edge (tdest, tapex).
+ enextself(*searchtet);
+ return ONEDGE;
+ }
+ if (s4 == 0.0) {
+ // On edge (tapex, torg).
+ enext2self(*searchtet);
+ return ONEDGE;
+ }
+ // On face (torg, tdest, tapex).
+ return ONFACE;
+ }
+ if (s2 == 0.0) {
+ fnextself(*searchtet);
+ if (s3 == 0.0) {
+ if (s4 == 0.0) {
+ // On toppo.
+ enext2self(*searchtet);
+ return ONVERTEX;
+ }
+ // On edge (tdest, toppo).
+ enextself(*searchtet);
+ return ONEDGE;
+ }
+ if (s4 == 0.0) {
+ // On edge (toppo, torg).
+ enext2self(*searchtet);
+ return ONEDGE;
+ }
+ // On face (torg, tdest, toppo).
+ return ONFACE;
+ }
+ if (s3 == 0.0) {
+ enextfnextself(*searchtet);
+ if (s4 == 0.0) {
+ // On edge (tapex, toppo).
+ enextself(*searchtet);
+ return ONEDGE;
+ }
+ // On face (tdest, tapex, toppo).
+ return ONFACE;
+ }
+ if (s4 == 0.0) {
+ enext2fnextself(*searchtet);
+ // On face (tapex, torg, toppo).
+ return ONFACE;
+ }
+
+ // Inside tetrahedron.
+ return INTETRAHEDRON;
+}
+
+//
+// End of point location routines
+//
+
+//
+// Begin of mesh transformation routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// categorizeface() Determine the flip type of a given face. //
+// //
+// On input, 'horiz' represents the face we want to flip (you can imagine it //
+// is parallel to the horizon). Let the tetrahedron above it be abcd, where //
+// abc is 'horiz'. //
+// //
+// This routine determines the suitable type of flip operation for 'horiz'. //
+// - Returns T23 if a 2-to-3 flip is applicable. 'horiz' is same as input. //
+// - Returns T32 if a 3-to-2 flip is applicable. 'horiz' is adjusted so //
+// that the primary edge of 'horiz' is the flipable edge. //
+// - Returns T22 if a 2-to-2 or 4-to-4 flip is applicable. 'horiz' is //
+// adjusted so that the primary edge of 'horiz' is the flipable edge. //
+// - Returns FORBIDDENFACE indicates although a 2-to-3 flip is applicable, //
+// but it is a subface and should not be flipped away. //
+// - Returns FORBIDDENEDGE indicates although a 3-to-2, or 2-to-2, or //
+// 4-to-4 flip is applicable, but the flipable edge is a subsegment and //
+// should not be flipped away. 'horiz' is adjusted so that the primary //
+// edge of 'horiz' is the flipable edge. //
+// - Returns UNFLIPABLE indicates it is unflipable due to the absence of //
+// a tetrahedron. 'horiz' is adjusted so that the primary edge of 'horiz'//
+// is the unflipable edge. Possibly, It is a subsegment. //
+// - Returns NONCONVEX indicates it is unflipable and is locally Delaunay. //
+// //
+// Given a face abc, with two adjoining tetrahedra abcd and bace. If abc is //
+// flipable, i.e., T23, T32, T22 or T44, its flip type can be determined by //
+// doing five orientation tests: two tests for determining that d, e lie on //
+// the different sides of abc, three tests for determining if the edge de //
+// intersects the face abc. However, if we use the neighbor information of //
+// the mesh data structure, we can reduce the five orientation tests to at //
+// most three tests, that is, the two tests for determining whether d and e //
+// lie on the different sides of abc can be saved. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::fliptype tetgenmesh::categorizeface(triface& horiz)
+{
+ triface symhoriz, casing;
+ face checksh, checkseg;
+ face cassh1, cassh2;
+ point pa, pb, pc, pd, pe, pf, pg;
+ point abdoppo, bcdoppo, cadoppo;
+ REAL ori1, ori2, ori3;
+ int adjtet;
+
+ sym(horiz, symhoriz);
+ if (symhoriz.tet == dummytet) {
+ // A hull face is unflipable and locally Delaunay.
+ return NONCONVEX;
+ }
+
+ adjustedgering(horiz, CCW);
+ findedge(&symhoriz, dest(horiz), org(horiz));
+ pa = org(horiz);
+ pb = dest(horiz);
+ pc = apex(horiz);
+ pd = oppo(horiz);
+ pe = oppo(symhoriz);
+
+ // Find the number of adjacent tetrahedra of abc, which have d, e, and one
+ // of corners of abc as their corners. This number can be 0, 1 and 2.
+ abdoppo = bcdoppo = cadoppo = (point) NULL;
+ adjtet = 0;
+ fnext(horiz, casing); // at edge 'ab'.
+ symself(casing);
+ if (casing.tet != dummytet) {
+ abdoppo = oppo(casing);
+ if (abdoppo == pe) adjtet++;
+ }
+ enextfnext(horiz, casing); // at edge 'bc'.
+ symself(casing);
+ if (casing.tet != dummytet) {
+ bcdoppo = oppo(casing);
+ if (bcdoppo == pe) adjtet++;
+ }
+ enext2fnext(horiz, casing); // at edge 'ca'.
+ symself(casing);
+ if (casing.tet != dummytet) {
+ cadoppo = oppo(casing);
+ if (cadoppo == pe) adjtet++;
+ }
+
+ if (adjtet == 0) {
+ // No adjacent tetrahedron. Types T23, T22 and T44 are possible.
+ ori1 = orient3d(pa, pb, pd, pe);
+ if (checksubfaces && ori1 != 0.0) {
+ // Check if abd and abe are both boundary faces?
+ fnext(horiz, casing);
+ tspivot(casing, cassh1);
+ fnext(symhoriz, casing);
+ tspivot(casing, cassh2);
+ if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
+ // abd and abe are both boundary faces. Check if ab is a segment.
+ findedge(&cassh1, pa, pb);
+ sspivot(cassh1, checkseg);
+ if (checkseg.sh == dummysh) {
+ // ab is not a segment - abd and abe belong to the same facet.
+ // The four points are forced to be coplanar.
+ ori1 = 0.0;
+ } else {
+ // ab is a segment - abd and abe belong to two different facets.
+ // In principle, a, b, c and d can form a tetrahedron (since
+ // ori1 != 0.0). However, we should avoid to create a very
+ // flat one which may induce to form a sequence of extremely
+ // badly-shaped or even wrong orientational tetrahedra. Hence,
+ // we use a larger epsilon to test if they're coplanar.
+ if (iscoplanar(pa, pb, pd, pe, ori1, b->epsilon * 1e+2)) ori1 = 0.0;
+ }
+ } else {
+ // abd and abe are not both boundary faces. Check if abd and bae
+ // are approximately coplanar with respect to the epsilon.
+ if (iscoplanar(pa, pb, pd, pe, ori1, b->epsilon)) ori1 = 0.0;
+ }
+ }
+ if (ori1 < 0.0) {
+ // e lies above abd, unflipable, tet abde is not present.
+#ifdef SELF_CHECK
+ if (!nonconvex) {
+ // abd and abe should not be hull faces, check it.
+ fnext(horiz, casing);
+ symself(casing);
+ assert(casing.tet != dummytet);
+ fnext(symhoriz, casing);
+ symself(casing);
+ assert(casing.tet != dummytet);
+ }
+#endif
+ if (checksubfaces) {
+ // The nonconvexbility may be casued by existing an subsegment.
+ tsspivot(&horiz, &checkseg);
+ if (checkseg.sh != dummysh) {
+ return FORBIDDENEDGE;
+ }
+ }
+ return UNFLIPABLE;
+ }
+ ori2 = orient3d(pb, pc, pd, pe);
+ if (checksubfaces && ori2 != 0.0) {
+ // Check if bcd and cbe are both boundary faces.
+ enextfnext(horiz, casing);
+ tspivot(casing, cassh1);
+ enext2fnext(symhoriz, casing);
+ tspivot(casing, cassh2);
+ if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
+ // bcd and cbe are both boundary faces. Check if bc is a segment.
+ findedge(&cassh1, pb, pc);
+ sspivot(cassh1, checkseg);
+ if (checkseg.sh == dummysh) {
+ // bc is not a segment - bcd and cbe belong to the same facet.
+ // The four points are forced to be coplanar.
+ ori2 = 0.0;
+ } else {
+ // bc is a segment - bcd and cbe belong to two different facets.
+ // In principle, b, c, d and e can form a tetrahedron (since
+ // ori2 != 0.0). Use a larger eps to test if they're coplanar.
+ if (iscoplanar(pb, pc, pd, pe, ori2, b->epsilon * 1e+2)) ori2 = 0.0;
+ }
+ } else {
+ // bcd and cbe are not both boundary faces. Check if bcd and cbe
+ // are approximately coplanar with respect to the epsilon.
+ if (iscoplanar(pb, pc, pd, pe, ori2, b->epsilon)) ori2 = 0.0;
+ }
+ }
+ if (ori2 < 0.0) {
+ // e lies above bcd, unflipable, tet bcde is not present.
+#ifdef SELF_CHECK
+ if (!nonconvex) {
+ // bcd and cbe should not be hull faces, check it.
+ enextfnext(horiz, casing);
+ symself(casing);
+ assert(casing.tet != dummytet);
+ enext2fnext(symhoriz, casing);
+ symself(casing);
+ assert(casing.tet != dummytet);
+ }
+#endif
+ enextself(horiz);
+ if (checksubfaces) {
+ // The nonconvexbility may be casued by existing an subsegment.
+ tsspivot(&horiz, &checkseg);
+ if (checkseg.sh != dummysh) {
+ return FORBIDDENEDGE;
+ }
+ }
+ return UNFLIPABLE;
+ }
+ ori3 = orient3d(pc, pa, pd, pe);
+ if (checksubfaces && ori3 != 0.0) {
+ // Check if cad and ace are both boundary faces.
+ enext2fnext(horiz, casing);
+ tspivot(casing, cassh1);
+ enextfnext(symhoriz, casing);
+ tspivot(casing, cassh2);
+ if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
+ // cad and ace are both boundary faces. Check if ca is a segment.
+ findedge(&cassh1, pc, pa);
+ sspivot(cassh1, checkseg);
+ if (checkseg.sh == dummysh) {
+ // ca is not a segment - cad and ace belong to the same facet.
+ // The four points are forced to be coplanar.
+ ori3 = 0.0;
+ } else {
+ // ca is a segment - cad and ace belong to two different facets.
+ // In principle, c, a, d and e can form a tetrahedron (since
+ // ori3 != 0.0). Use a larger eps to test if they're coplanar.
+ if (iscoplanar(pc, pa, pd, pe, ori3, b->epsilon * 1e+2)) ori3 = 0.0;
+ }
+ } else {
+ // cad and ace are not both boundary faces. Check if cad and ace
+ // are approximately coplanar with respect to the epsilon.
+ if (iscoplanar(pc, pa, pd, pe, ori3, b->epsilon)) ori3 = 0.0;
+ }
+ }
+ if (ori3 < 0.0) {
+ // e lies above cad, unflipable, tet cade is not present.
+#ifdef SELF_CHECK
+ if (!nonconvex) {
+ // cad and ace should not be hull faces, check it.
+ enext2fnext(horiz, casing);
+ symself(casing);
+ assert(casing.tet != dummytet);
+ enextfnext(symhoriz, casing);
+ symself(casing);
+ assert(casing.tet != dummytet);
+ }
+#endif
+ enext2self(horiz);
+ if (checksubfaces) {
+ // The nonconvexbility may be casued by existing an subsegment.
+ tsspivot(&horiz, &checkseg);
+ if (checkseg.sh != dummysh) {
+ return FORBIDDENEDGE;
+ }
+ }
+ return UNFLIPABLE;
+ }
+ if (ori1 == 0.0) {
+ // e is coplanar with abd.
+ if (ori2 * ori3 == 0.0) {
+ // only one zero is possible.
+ // assert(!(ori2 == 0.0 && ori3 == 0.0));
+ // Three points (d, e, and a or b) are collinear, abc is unflipable
+ // and locally Delaunay.
+ return NONCONVEX;
+ }
+ } else if (ori2 == 0.0) {
+ // e is coplanar with bcd.
+ if (ori1 * ori3 == 0.0) {
+ // only one zero is possible.
+ // assert(!(ori1 == 0.0 && ori3 == 0.0));
+ // Three points (d, e, and b or c) are collinear, abc is unflipable
+ // and locally Delaunay.
+ return NONCONVEX;
+ }
+ // Adjust 'horiz' and 'symhoriz' be the edge bc.
+ enextself(horiz);
+ enext2self(symhoriz);
+ } else if (ori3 == 0.0) {
+ // e is coplanar with cad.
+ if (ori1 * ori2 == 0.0) {
+ // only one zero is possible.
+ // assert(!(ori1 == 0.0 && ori2 == 0.0));
+ // Three points (d, e, and c or a) are collinear, abc is unflipable
+ // and locally Delaunay.
+ return NONCONVEX;
+ }
+ // Adjust 'horiz' and 'symhoriz' be the edge ca.
+ enext2self(horiz);
+ enextself(symhoriz);
+ } else {
+ // e lies below all three faces, flipable.
+ if (checksubfaces) {
+ tspivot(horiz, checksh);
+ if (checksh.sh != dummysh) {
+ // To flip a subface is forbidden.
+ return FORBIDDENFACE;
+ }
+ }
+ return T23;
+ }
+ // Four points are coplanar, T22 or T44 is possible.
+ if (checksubfaces) {
+ tsspivot(&horiz, &checkseg);
+ if (checkseg.sh != dummysh) {
+ // To flip a subsegment is forbidden.
+ return FORBIDDENEDGE;
+ }
+ tspivot(horiz, checksh);
+ if (checksh.sh != dummysh) {
+ // To flip a subface is forbidden.
+ return FORBIDDENFACE;
+ }
+ }
+ // Assume the four coplanar points are a, b, d, e, abd and abe are two
+ // coplanar faces. If both abd and abe are hull faces, flipable(T22).
+ // If they are interior faces, get the opposite tetrahedra abdf and
+ // abeg, if f = g, flipable (T44). Otherwise, unflipable.
+ pf = pg = (point) NULL;
+ fnext(horiz, casing);
+ symself(casing);
+ if (casing.tet != dummytet) {
+ pf = oppo(casing);
+ }
+ fnext(symhoriz, casing);
+ symself(casing);
+ if (casing.tet != dummytet) {
+ pg = oppo(casing);
+ }
+ if (pf == pg) {
+ // Either T22 (pf == pg == NULL) or T44 (pf and pg) is possible.
+ if (checksubfaces) {
+ // Retreat the corner points a, b, and c.
+ pa = org(horiz);
+ pb = dest(horiz);
+ pc = apex(horiz);
+ // Be careful not to create an inverted tetrahedron. Check the case.
+ ori1 = orient3d(pc, pd, pe, pa);
+ if (ori1 <= 0) return NONCONVEX;
+ ori1 = orient3d(pd, pc, pe, pb);
+ if (ori1 <= 0) return NONCONVEX;
+ if (pf != (point) NULL) {
+ ori1 = orient3d(pd, pf, pe, pa);
+ if (ori1 <= 0) return NONCONVEX;
+ ori1 = orient3d(pf, pd, pe, pb);
+ if (ori1 <= 0) return NONCONVEX;
+ }
+ }
+ if (pf == (point) NULL) {
+ // abd and abe are hull faces, flipable.
+ return T22;
+ } else {
+ // abd and abe are interior faces, flipable.
+ assert(pf != (point) NULL);
+ return T44;
+ }
+ } else {
+ // ab has more than four faces around it, unflipable.
+ return UNFLIPABLE;
+ }
+ } else if (adjtet == 1) {
+ // One of its three edges is locally non-convex. Type T32 is possible.
+ // Adjust current configuration so that edge ab is non-convex.
+ if (bcdoppo == pe) {
+ // Edge bc is non-convex. Adjust 'horiz' and 'symhoriz' be edge bc.
+ enextself(horiz);
+ enext2self(symhoriz);
+ pa = org(horiz);
+ pb = dest(horiz);
+ pc = apex(horiz);
+ } else if (cadoppo == pe) {
+ // Edge ca is non-convex. Adjust 'horiz' and 'symhoriz' be edge ca.
+ enext2self(horiz);
+ enextself(symhoriz);
+ pa = org(horiz);
+ pb = dest(horiz);
+ pc = apex(horiz);
+ } else {
+ // Edge ab is non-convex.
+ assert(abdoppo == pe);
+ } // Now ab is the non-convex edge.
+ // In order to be flipable, ab should cross face cde. Check it.
+ ori1 = orient3d(pc, pd, pe, pa);
+ if (checksubfaces && ori1 != 0.0) {
+ // Check if cad and ace are both boundary faces.
+ enext2fnext(horiz, casing);
+ tspivot(casing, cassh1);
+ enextfnext(symhoriz, casing);
+ tspivot(casing, cassh2);
+ if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
+ // cad and ace are both boundary faces. Check if ca is a segment.
+ findedge(&cassh1, pc, pa);
+ sspivot(cassh1, checkseg);
+ if (checkseg.sh == dummysh) {
+ // ca is not a segment. cad and ace belong to the same facet.
+ // The four points are forced to be coplanar.
+ ori1 = 0.0;
+ } else {
+ // ca is a segment. cad and ace belong to different facets.
+ // In principle, c, d, e, and a can form a tetrahedron (since
+ // ori1 != 0.0). However, we should avoid to create a very
+ // flat tet. Use a larger epsilon to test if they're coplanar.
+ if (iscoplanar(pc, pd, pe, pa, ori1, b->epsilon * 1e+2)) ori1 = 0.0;
+ }
+ } else {
+ // Check if c, d, e, and a are approximately coplanar.
+ if (iscoplanar(pc, pd, pe, pa, ori1, b->epsilon)) ori1 = 0.0;
+ }
+ }
+ if (ori1 <= 0.0) {
+ // a lies above or is coplanar cde, abc is locally Delaunay.
+ return NONCONVEX;
+ }
+ ori2 = orient3d(pd, pc, pe, pb);
+ if (checksubfaces && ori2 != 0.0) {
+ // Check if bcd and cbe are both boundary faces.
+ enextfnext(horiz, casing);
+ tspivot(casing, cassh1);
+ enext2fnext(symhoriz, casing);
+ tspivot(casing, cassh2);
+ if (cassh1.sh != dummysh && cassh2.sh != dummysh) {
+ // bcd and cbe are both boundary faces. Check if bc is a segment.
+ findedge(&cassh1, pb, pc);
+ sspivot(cassh1, checkseg);
+ if (checkseg.sh == dummysh) {
+ // bc is not a segment. bcd and cbe belong to the same facet.
+ // The four points are forced to be coplanar.
+ ori2 = 0.0;
+ } else {
+ // bc is a segment. bcd and cbe belong to different facets.
+ // In principle, d, c, e, and b can form a tetrahedron (since
+ // ori2 != 0.0). However, we should avoid to create a very
+ // flat tet. Use a larger epsilon to test if they're coplanar.
+ if (iscoplanar(pd, pc, pe, pb, ori2, b->epsilon * 1e+2)) ori2 = 0.0;
+ }
+ } else {
+ // Check if d, c, e, and b are approximately coplanar.
+ if (iscoplanar(pd, pc, pe, pb, ori2, b->epsilon)) ori2 = 0.0;
+ }
+ }
+ if (ori2 <= 0.0) {
+ // b lies above dce, unflipable, and abc is locally Delaunay.
+ return NONCONVEX;
+ }
+ // Edge ab crosses face cde properly.
+ if (checksubfaces) {
+ // If abc is subface, then ab must be a subsegment (because abde is
+ // a tetrahedron and ab crosses cde properly).
+ tsspivot(&horiz, &checkseg);
+ if (checkseg.sh != dummysh) {
+ // To flip a subsegment is forbidden.
+ return FORBIDDENEDGE;
+ }
+ // Both abd and bae should not be subfaces (because they're not
+ // coplanar and ab is not a subsegment). However, they may be
+ // subfaces and belong to a facet (created during facet recovery),
+ // that is, abde is an invalid tetrahedron. Find this case out.
+ fnext(horiz, casing);
+ tspivot(casing, cassh1);
+ fnext(symhoriz, casing);
+ tspivot(casing, cassh2);
+ if (cassh1.sh != dummysh || cassh2.sh != dummysh) {
+ // Unfortunately, they're subfaces. Corrections need be done here.
+ printf("Warning: A tetrahedron spans two subfaces of a facet.\n");
+ // Temporarily, let it be there.
+ return UNFLIPABLE;
+ }
+ }
+ return T32;
+ } else {
+ assert(adjtet == 2);
+ // The convex hull of {a, b, c, d, e} has only four vertices, abc is
+ // unflipable, furthermore, it is locally Delaunay.
+ return NONCONVEX;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// enqueueflipface(), enqueueflipedge() Add a face or an edge to the end //
+// of a queue. //
+// //
+// This face or edge may be non-Delaunay and will be checked. Corresponding //
+// flip operation will be applied on it if it is non-Delaunay. The vertices //
+// of the face or edge are stored seperatly used to ensure the face or edge //
+// is still the same one when we save it. Sometimes, other flipping will //
+// cause this face or edge be changed or dead. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::enqueueflipface(triface& checkface, queue* flipqueue)
+{
+ badface *queface;
+
+ queface = (badface *) flipqueue->push((void *) NULL);
+ queface->tt = checkface;
+ queface->forg = org(checkface);
+ queface->fdest = dest(checkface);
+ queface->fapex = apex(checkface);
+}
+
+void tetgenmesh::enqueueflipedge(face& checkedge, queue* flipqueue)
+{
+ badface *queface;
+
+ queface = (badface *) flipqueue->push((void *) NULL);
+ queface->ss = checkedge;
+ queface->forg = sorg(checkedge);
+ queface->fdest = sdest(checkedge);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// flip23() Perform a 2-to-3 flip. //
+// //
+// On input, 'flipface' represents the face will be flipped. Let it is abc, //
+// the two tetrahedra sharing abc are abcd, bace. abc is not a subface. //
+// //
+// A 2-to-3 flip is to change two tetrahedra abcd, bace to three tetrahedra //
+// edab, edbc, and edca. As a result, face abc has been removed and three //
+// new faces eda, edb and edc have been created. //
+// //
+// On completion, 'flipface' returns edab. If 'flipqueue' is not NULL, all //
+// possibly non-Delaunay faces are added into it. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::flip23(triface* flipface, queue* flipqueue)
+{
+ triface abcd, bace; // Old configuration.
+ triface oldabd, oldbcd, oldcad;
+ triface abdcasing, bcdcasing, cadcasing;
+ face abdsh, bcdsh, cadsh;
+ triface oldbae, oldcbe, oldace;
+ triface baecasing, cbecasing, acecasing;
+ face baesh, cbesh, acesh;
+ triface edab, edbc, edca; // New configuration.
+ point pa, pb, pc, pd, pe;
+ REAL attrib, volume;
+ int i;
+
+ abcd = *flipface;
+ adjustedgering(abcd, CCW); // abcd represents edge ab.
+ sym(abcd, bace);
+ findedge(&bace, dest(abcd), org(abcd)); // bace represents edge ba.
+ pa = org(abcd);
+ pb = dest(abcd);
+ pc = apex(abcd);
+ pd = oppo(abcd);
+ pe = oppo(bace);
+
+ if (b->verbose > 2) {
+ printf(" Do T23 on face (%d, %d, %d, %d).\n", pointmark(pa),
+ pointmark(pb), pointmark(pc), pointmark(pd));
+ }
+ flip23s++;
+
+#ifdef SELF_CHECK
+ // Edge de must cross face abc properly.
+ assert(orient3d(pa, pb, pd, pe) >= 0.0);
+ assert(orient3d(pb, pc, pd, pe) >= 0.0);
+ assert(orient3d(pc, pa, pd, pe) >= 0.0);
+#endif
+
+ // Storing the old configuration outside the convex hull.
+ fnext(abcd, oldabd);
+ enextfnext(abcd, oldbcd);
+ enext2fnext(abcd, oldcad);
+ fnext(bace, oldbae);
+ enext2fnext(bace, oldcbe);
+ enextfnext(bace, oldace);
+ sym(oldabd, abdcasing);
+ sym(oldbcd, bcdcasing);
+ sym(oldcad, cadcasing);
+ sym(oldbae, baecasing);
+ sym(oldcbe, cbecasing);
+ sym(oldace, acecasing);
+ if (checksubfaces) {
+ tspivot(oldabd, abdsh);
+ tspivot(oldbcd, bcdsh);
+ tspivot(oldcad, cadsh);
+ tspivot(oldbae, baesh);
+ tspivot(oldcbe, cbesh);
+ tspivot(oldace, acesh);
+ }
+
+ // Creating the new configuration inside the convex hull.
+ edab.tet = abcd.tet; // Update abcd to be edab.
+ setorg (edab, pe);
+ setdest(edab, pd);
+ setapex(edab, pa);
+ setoppo(edab, pb);
+ edbc.tet = bace.tet; // Update bace to be edbc.
+ setorg (edbc, pe);
+ setdest(edbc, pd);
+ setapex(edbc, pb);
+ setoppo(edbc, pc);
+ maketetrahedron(&edca); // Create edca.
+ setorg (edca, pe);
+ setdest(edca, pd);
+ setapex(edca, pc);
+ setoppo(edca, pa);
+ // Set the element attributes of the new tetrahedron 'edca'.
+ for (i = 0; i < in->numberoftetrahedronattributes; i++) {
+ attrib = elemattribute(abcd.tet, i);
+ setelemattribute(edca.tet, i, attrib);
+ }
+ // Set the volume constraint of the new tetrahedron 'edca' if the -ra
+ // switches are not used together. In -ra case, the various volume
+ // constraints can be spreaded very far.
+ if (b->varvolume && !b->refine) {
+ volume = volumebound(abcd.tet);
+ setvolumebound(edca.tet, volume);
+ }
+
+ // Clear old bonds in edab(was abcd) and edbc(was bace).
+ for (i = 0; i < 4; i ++) {
+ edab.loc = i;
+ dissolve(edab);
+ edbc.loc = i;
+ dissolve(edbc);
+ }
+ // Bond the faces inside the convex hull.
+ edab.loc = 0;
+ edca.loc = 1;
+ bond(edab, edca);
+ edab.loc = 1;
+ edbc.loc = 0;
+ bond(edab, edbc);
+ edbc.loc = 1;
+ edca.loc = 0;
+ bond(edbc, edca);
+ // Bond the faces on the convex hull.
+ edab.loc = 2;
+ bond(edab, abdcasing);
+ edab.loc = 3;
+ bond(edab, baecasing);
+ edbc.loc = 2;
+ bond(edbc, bcdcasing);
+ edbc.loc = 3;
+ bond(edbc, cbecasing);
+ edca.loc = 2;
+ bond(edca, cadcasing);
+ edca.loc = 3;
+ bond(edca, acecasing);
+ // There may exist subfaces that need to be bonded to new configuarton.
+ if (checksubfaces) {
+ // Clear old flags in edab(was abcd) and edbc(was bace).
+ for (i = 0; i < 4; i ++) {
+ edab.loc = i;
+ tsdissolve(edab);
+ edbc.loc = i;
+ tsdissolve(edbc);
+ }
+ if (abdsh.sh != dummysh) {
+ edab.loc = 2;
+ tsbond(edab, abdsh);
+ }
+ if (baesh.sh != dummysh) {
+ edab.loc = 3;
+ tsbond(edab, baesh);
+ }
+ if (bcdsh.sh != dummysh) {
+ edbc.loc = 2;
+ tsbond(edbc, bcdsh);
+ }
+ if (cbesh.sh != dummysh) {
+ edbc.loc = 3;
+ tsbond(edbc, cbesh);
+ }
+ if (cadsh.sh != dummysh) {
+ edca.loc = 2;
+ tsbond(edca, cadsh);
+ }
+ if (acesh.sh != dummysh) {
+ edca.loc = 3;
+ tsbond(edca, acesh);
+ }
+ }
+
+ edab.loc = 0;
+ edbc.loc = 0;
+ edca.loc = 0;
+ if (b->verbose > 3) {
+ printf(" Updating edab ");
+ printtet(&edab);
+ printf(" Updating edbc ");
+ printtet(&edbc);
+ printf(" Creating edca ");
+ printtet(&edca);
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ enextfnext(edab, abdcasing);
+ enqueueflipface(abdcasing, flipqueue);
+ enext2fnext(edab, baecasing);
+ enqueueflipface(baecasing, flipqueue);
+ enextfnext(edbc, bcdcasing);
+ enqueueflipface(bcdcasing, flipqueue);
+ enext2fnext(edbc, cbecasing);
+ enqueueflipface(cbecasing, flipqueue);
+ enextfnext(edca, cadcasing);
+ enqueueflipface(cadcasing, flipqueue);
+ enext2fnext(edca, acecasing);
+ enqueueflipface(acecasing, flipqueue);
+ }
+
+ // Save a live handle in 'recenttet'.
+ recenttet = edbc;
+ // Set the return handle be edab.
+ *flipface = edab;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// flip32() Perform a 3-to-2 flip. //
+// //
+// On input, 'flipface' represents the face will be flipped. Let it is eda, //
+// where edge ed is locally non-convex. Three tetrahedra sharing ed are edab,//
+// edbc, and edca. ed is not a subsegment. //
+// //
+// A 3-to-2 flip is to change the three tetrahedra edab, edbc, and edca into //
+// another two tetrahedra abcd and bace. As a result, the edge ed has been //
+// removed and the face abc has been created. //
+// //
+// On completion, 'flipface' returns abcd. If 'flipqueue' is not NULL, all //
+// possibly non-Delaunay faces are added into it. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::flip32(triface* flipface, queue* flipqueue)
+{
+ triface edab, edbc, edca; // Old configuration.
+ triface oldabd, oldbcd, oldcad;
+ triface abdcasing, bcdcasing, cadcasing;
+ face abdsh, bcdsh, cadsh;
+ triface oldbae, oldcbe, oldace;
+ triface baecasing, cbecasing, acecasing;
+ face baesh, cbesh, acesh;
+ triface abcd, bace; // New configuration.
+ point pa, pb, pc, pd, pe;
+ int i;
+
+ edab = *flipface;
+ adjustedgering(edab, CCW);
+ fnext(edab, edbc);
+ symself(edbc);
+ findedge(&edbc, org(edab), dest(edab));
+ fnext(edbc, edca);
+ symself(edca);
+ findedge(&edca, org(edab), dest(edab));
+ pa = apex(edab);
+ pb = oppo(edab);
+ pc = oppo(edbc);
+ pd = dest(edab);
+ pe = org(edab);
+
+ if (b->verbose > 2) {
+ printf(" Do T32 on face (%d, %d, %d, %d).\n",
+ pointmark(pe), pointmark(pd), pointmark(pa), pointmark(pb));
+ }
+ flip32s++;
+
+#ifdef SELF_CHECK
+ // Edge de must cross face abc properly.
+ assert(orient3d(pa, pb, pc, pd) <= 0.0);
+ assert(orient3d(pb, pa, pc, pe) <= 0.0);
+#endif
+
+ // Storing the old configuration outside the convex hull.
+ enextfnext(edab, oldabd);
+ enext2fnext(edab, oldbae);
+ enextfnext(edbc, oldbcd);
+ enext2fnext(edbc, oldcbe);
+ enextfnext(edca, oldcad);
+ enext2fnext(edca, oldace);
+ sym(oldabd, abdcasing);
+ sym(oldbcd, bcdcasing);
+ sym(oldcad, cadcasing);
+ sym(oldbae, baecasing);
+ sym(oldcbe, cbecasing);
+ sym(oldace, acecasing);
+ if (checksubfaces) {
+ tspivot(oldabd, abdsh);
+ tspivot(oldbcd, bcdsh);
+ tspivot(oldcad, cadsh);
+ tspivot(oldbae, baesh);
+ tspivot(oldcbe, cbesh);
+ tspivot(oldace, acesh);
+ }
+
+ // Creating the new configuration inside the convex hull.
+ abcd.tet = edab.tet; // Update edab to be abcd.
+ setorg (abcd, pa);
+ setdest(abcd, pb);
+ setapex(abcd, pc);
+ setoppo(abcd, pd);
+ bace.tet = edbc.tet; // Update edbc to be bace.
+ setorg (bace, pb);
+ setdest(bace, pa);
+ setapex(bace, pc);
+ setoppo(bace, pe);
+ // Dealloc a redundant tetrahedron (edca).
+ tetrahedrondealloc(edca.tet);
+
+ // Clear the old bonds in abcd (was edab) and bace (was edbc).
+ for (i = 0; i < 4; i ++) {
+ abcd.loc = i;
+ dissolve(abcd);
+ bace.loc = i;
+ dissolve(bace);
+ }
+ // Bond the inside face of the convex hull.
+ abcd.loc = 0;
+ bace.loc = 0;
+ bond(abcd, bace);
+ // Bond the outside faces of the convex hull.
+ abcd.loc = 1;
+ bond(abcd, abdcasing);
+ abcd.loc = 2;
+ bond(abcd, bcdcasing);
+ abcd.loc = 3;
+ bond(abcd, cadcasing);
+ bace.loc = 1;
+ bond(bace, baecasing);
+ bace.loc = 3;
+ bond(bace, cbecasing);
+ bace.loc = 2;
+ bond(bace, acecasing);
+ if (checksubfaces) {
+ // Clear old bonds in abcd(was edab) and bace(was edbc).
+ for (i = 0; i < 4; i ++) {
+ abcd.loc = i;
+ tsdissolve(abcd);
+ bace.loc = i;
+ tsdissolve(bace);
+ }
+ if (abdsh.sh != dummysh) {
+ abcd.loc = 1;
+ tsbond(abcd, abdsh);
+ }
+ if (baesh.sh != dummysh) {
+ bace.loc = 1;
+ tsbond(bace, baesh);
+ }
+ if (bcdsh.sh != dummysh) {
+ abcd.loc = 2;
+ tsbond(abcd, bcdsh);
+ }
+ if (cbesh.sh != dummysh) {
+ bace.loc = 3;
+ tsbond(bace, cbesh);
+ }
+ if (cadsh.sh != dummysh) {
+ abcd.loc = 3;
+ tsbond(abcd, cadsh);
+ }
+ if (acesh.sh != dummysh) {
+ bace.loc = 2;
+ tsbond(bace, acesh);
+ }
+ }
+
+ abcd.loc = 0;
+ bace.loc = 0;
+ if (b->verbose > 3) {
+ printf(" Updating abcd ");
+ printtet(&abcd);
+ printf(" Updating bace ");
+ printtet(&bace);
+ printf(" Deleting edca ");
+ printtet(&edca);
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ fnext(abcd, abdcasing);
+ enqueueflipface(abdcasing, flipqueue);
+ fnext(bace, baecasing);
+ enqueueflipface(baecasing, flipqueue);
+ enextfnext(abcd, bcdcasing);
+ enqueueflipface(bcdcasing, flipqueue);
+ enextfnext(bace, cbecasing);
+ enqueueflipface(cbecasing, flipqueue);
+ enext2fnext(abcd, cadcasing);
+ enqueueflipface(cadcasing, flipqueue);
+ enext2fnext(bace, acecasing);
+ enqueueflipface(acecasing, flipqueue);
+ }
+
+ // Save a live handle in 'recenttet'.
+ recenttet = abcd;
+ // Set the return handle be abcd.
+ *flipface = abcd;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// flip22() Perform a 2-to-2 (or 4-to-4) flip. //
+// //
+// On input, 'flipface' represents the face will be flipped. Let it is abe, //
+// ab is the flipable edge, the two tetrahedra sharing abe are abce and bade,//
+// hence a, b, c and d are coplanar. If abc, bad are interior faces, the two //
+// tetrahedra opposite to e are bacf and abdf. ab is not a subsegment. //
+// //
+// A 2-to-2 flip is to change two tetrahedra abce and bade into another two //
+// tetrahedra dcae and cdbe. If bacf and abdf exist, they're changed to cdaf //
+// and dcbf, thus a 4-to-4 flip. As a result, two or four tetrahedra have //
+// rotated counterclockwise (using right-hand rule with thumb points to e): //
+// abce->dcae, bade->cdbe, and bacf->cdaf, abdf->dcbf. //
+// //
+// If abc and bad are subfaces, a 2-to-2 flip is performed simultaneously by //
+// calling routine flip22sub(), hence abc->dca, bad->cdb. The edge rings of //
+// the flipped subfaces dca and cdb have the same orientation as abc and bad.//
+// Hence, they have the same orientation as other subfaces of the facet with //
+// respect to the lift point of this facet. //
+// //
+// On completion, 'flipface' holds edge dc of tetrahedron dcae. 'flipqueue' //
+// contains all possibly non-Delaunay faces if it is not NULL. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::flip22(triface* flipface, queue* flipqueue)
+{
+ triface abce, bade;
+ triface oldbce, oldcae, oldade, olddbe;
+ triface bcecasing, caecasing, adecasing, dbecasing;
+ face bcesh, caesh, adesh, dbesh;
+ triface bacf, abdf;
+ triface oldacf, oldcbf, oldbdf, olddaf;
+ triface acfcasing, cbfcasing, bdfcasing, dafcasing;
+ face acfsh, cbfsh, bdfsh, dafsh;
+ face abc, bad;
+ point pa, pb, pc, pd, pe, pf;
+ int mirrorflag;
+
+ adjustedgering(*flipface, CCW); // 'flipface' is bae.
+ fnext(*flipface, abce);
+ esymself(abce);
+ adjustedgering(*flipface, CW); // 'flipface' is abe.
+ fnext(*flipface, bade);
+ assert(bade.tet != dummytet);
+ esymself(bade);
+ pa = org(abce);
+ pb = dest(abce);
+ pc = apex(abce);
+ pd = apex(bade);
+ pe = oppo(bade);
+ assert(oppo(abce) == pe);
+ sym(abce, bacf);
+ mirrorflag = bacf.tet != dummytet;
+ if (mirrorflag) {
+ findedge(&bacf, pb, pa);
+ sym(bade, abdf);
+ assert(abdf.tet != dummytet);
+ findedge(&abdf, pa, pb);
+ pf = oppo(bacf);
+ assert(oppo(abdf) == pf);
+ }
+
+ if (b->verbose > 2) {
+ printf(" Do %s on edge (%d, %d).\n", mirrorflag ? "T44" : "T22",
+ pointmark(pa), pointmark(pb));
+ }
+ mirrorflag ? flip44s++ : flip22s++;
+
+#ifdef SELF_CHECK
+ // The quadrilateral formed by a, b, c, and d must be convex.
+ assert(orient3d(pc, pd, pe, pa) <= 0.0);
+ assert(orient3d(pd, pc, pe, pb) <= 0.0);
+#endif
+
+ // Save the old configuration at the convex hull.
+ enextfnext(abce, oldbce);
+ enext2fnext(abce, oldcae);
+ enextfnext(bade, oldade);
+ enext2fnext(bade, olddbe);
+ sym(oldbce, bcecasing);
+ sym(oldcae, caecasing);
+ sym(oldade, adecasing);
+ sym(olddbe, dbecasing);
+ if (checksubfaces) {
+ tspivot(oldbce, bcesh);
+ tspivot(oldcae, caesh);
+ tspivot(oldade, adesh);
+ tspivot(olddbe, dbesh);
+ tspivot(abce, abc);
+ tspivot(bade, bad);
+ }
+ if (mirrorflag) {
+ enextfnext(bacf, oldacf);
+ enext2fnext(bacf, oldcbf);
+ enextfnext(abdf, oldbdf);
+ enext2fnext(abdf, olddaf);
+ sym(oldacf, acfcasing);
+ sym(oldcbf, cbfcasing);
+ sym(oldbdf, bdfcasing);
+ sym(olddaf, dafcasing);
+ if (checksubfaces) {
+ tspivot(oldacf, acfsh);
+ tspivot(oldcbf, cbfsh);
+ tspivot(oldbdf, bdfsh);
+ tspivot(olddaf, dafsh);
+ }
+ }
+
+ // Rotate abce, bade one-quarter turn counterclockwise.
+ bond(oldbce, caecasing);
+ bond(oldcae, adecasing);
+ bond(oldade, dbecasing);
+ bond(olddbe, bcecasing);
+ if (checksubfaces) {
+ // Check for subfaces and rebond them to the rotated tets.
+ if (caesh.sh == dummysh) {
+ tsdissolve(oldbce);
+ } else {
+ tsbond(oldbce, caesh);
+ }
+ if (adesh.sh == dummysh) {
+ tsdissolve(oldcae);
+ } else {
+ tsbond(oldcae, adesh);
+ }
+ if (dbesh.sh == dummysh) {
+ tsdissolve(oldade);
+ } else {
+ tsbond(oldade, dbesh);
+ }
+ if (bcesh.sh == dummysh) {
+ tsdissolve(olddbe);
+ } else {
+ tsbond(olddbe, bcesh);
+ }
+ }
+ if (mirrorflag) {
+ // Rotate bacf, abdf one-quarter turn counterclockwise.
+ bond(oldcbf, acfcasing);
+ bond(oldacf, dafcasing);
+ bond(olddaf, bdfcasing);
+ bond(oldbdf, cbfcasing);
+ if (checksubfaces) {
+ // Check for subfaces and rebond them to the rotated tets.
+ if (acfsh.sh == dummysh) {
+ tsdissolve(oldcbf);
+ } else {
+ tsbond(oldcbf, acfsh);
+ }
+ if (dafsh.sh == dummysh) {
+ tsdissolve(oldacf);
+ } else {
+ tsbond(oldacf, dafsh);
+ }
+ if (bdfsh.sh == dummysh) {
+ tsdissolve(olddaf);
+ } else {
+ tsbond(olddaf, bdfsh);
+ }
+ if (cbfsh.sh == dummysh) {
+ tsdissolve(oldbdf);
+ } else {
+ tsbond(oldbdf, cbfsh);
+ }
+ }
+ }
+
+ // New vertex assignments for the rotated tetrahedra.
+ setorg(abce, pd); // Update abce to dcae
+ setdest(abce, pc);
+ setapex(abce, pa);
+ setorg(bade, pc); // Update bade to cdbe
+ setdest(bade, pd);
+ setapex(bade, pb);
+ if (mirrorflag) {
+ setorg(bacf, pc); // Update bacf to cdaf
+ setdest(bacf, pd);
+ setapex(bacf, pa);
+ setorg(abdf, pd); // Update abdf to dcbf
+ setdest(abdf, pc);
+ setapex(abdf, pb);
+ }
+
+ // Are there subfaces need to be flipped?
+ if (checksubfaces && abc.sh != dummysh) {
+ assert(bad.sh != dummysh);
+ // Adjust the edge be ab, so the rotation of subfaces is according with
+ // the rotation of tetrahedra.
+ findedge(&abc, pa, pb);
+ // Flip an edge of two subfaces, ignore non-Delaunay edges.
+ flip22sub(&abc, NULL);
+ }
+
+ if (b->verbose > 3) {
+ printf(" Updating abce ");
+ printtet(&abce);
+ printf(" Updating bade ");
+ printtet(&bade);
+ if (mirrorflag) {
+ printf(" Updating bacf ");
+ printtet(&bacf);
+ printf(" Updating abdf ");
+ printtet(&abdf);
+ }
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ enextfnext(abce, bcecasing);
+ enqueueflipface(bcecasing, flipqueue);
+ enext2fnext(abce, caecasing);
+ enqueueflipface(caecasing, flipqueue);
+ enextfnext(bade, adecasing);
+ enqueueflipface(adecasing, flipqueue);
+ enext2fnext(bade, dbecasing);
+ enqueueflipface(dbecasing, flipqueue);
+ if (mirrorflag) {
+ enextfnext(bacf, acfcasing);
+ enqueueflipface(acfcasing, flipqueue);
+ enext2fnext(bacf, cbfcasing);
+ enqueueflipface(cbfcasing, flipqueue);
+ enextfnext(abdf, bdfcasing);
+ enqueueflipface(bdfcasing, flipqueue);
+ enext2fnext(abdf, dafcasing);
+ enqueueflipface(dafcasing, flipqueue);
+ }
+ // The two new faces dcae (abce), cdbe (bade) may still not be locally
+ // Delaunay, and may need be flipped (flip23). On the other hand, in
+ // conforming Delaunay algorithm, two new subfaces dca (abc), and cdb
+ // (bad) may be non-conforming Delaunay, they need be queued if they
+ // are locally Delaunay but non-conforming Delaunay.
+ enqueueflipface(abce, flipqueue);
+ enqueueflipface(bade, flipqueue);
+ }
+
+ // Save a live handle in 'recenttet'.
+ recenttet = abce;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// flip22sub() Perform a 2-to-2 flip on a subface edge. //
+// //
+// The flip edge is given by subface 'flipedge'. Let it is abc, where ab is //
+// the flipping edge. The other subface is bad, where a, b, c, d form a //
+// convex quadrilateral. ab is not a subsegment. //
+// //
+// A 2-to-2 subface flip is to change two subfaces abc and bad to another //
+// two subfaces dca and cdb. Hence, edge ab has been removed and dc becomes //
+// an edge. If a point e is above abc, this flip is equal to rotate abc and //
+// bad counterclockwise using right-hand rule with thumb points to e. It is //
+// important to know that the edge rings of the flipped subfaces dca and cdb //
+// are keeping the same orientation as their original subfaces. So they have //
+// the same orientation with respect to the lift point of this facet. //
+// //
+// During rotating, the face rings of the four edges bc, ca, ad, and de need //
+// be re-connected. If the edge is not a subsegment, then its face ring has //
+// only two faces, a sbond() will bond them together. If it is a subsegment, //
+// one should use sbond1() twice to bond two different handles to the rotat- //
+// ing subface, one is predecssor (-casin), another is successor (-casout). //
+// //
+// If 'flipqueue' is not NULL, it returns four edges bc, ca, ad, de, which //
+// may be non-Delaunay. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::flip22sub(face* flipedge, queue* flipqueue)
+{
+ face abc, bad;
+ face oldbc, oldca, oldad, olddb;
+ face bccasin, bccasout, cacasin, cacasout;
+ face adcasin, adcasout, dbcasin, dbcasout;
+ face bc, ca, ad, db;
+ face spinsh;
+ point pa, pb, pc, pd;
+
+ abc = *flipedge;
+ spivot(abc, bad);
+ if (sorg(bad) != sdest(abc)) {
+ sesymself(bad);
+ }
+ pa = sorg(abc);
+ pb = sdest(abc);
+ pc = sapex(abc);
+ pd = sapex(bad);
+
+ if (b->verbose > 2) {
+ printf(" Flip sub edge (%d, %d).\n", pointmark(pa), pointmark(pb));
+ }
+
+ // Save the old configuration outside the quadrilateral.
+ senext(abc, oldbc);
+ senext2(abc, oldca);
+ senext(bad, oldad);
+ senext2(bad, olddb);
+ // Get the outside connection. Becareful if there is a subsegment on the
+ // quadrilateral, two casings (casin and casout) are needed to save for
+ // keeping the face link.
+ spivot(oldbc, bccasout);
+ sspivot(oldbc, bc);
+ if (bc.sh != dummysh) {
+ // 'bc' is a subsegment.
+ assert(bccasout.sh != dummysh);
+ if (oldbc.sh != bccasout.sh) {
+ // 'oldbc' is not self-bonded.
+ spinsh = bccasout;
+ do {
+ bccasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != oldbc.sh);
+ } else {
+ bccasout.sh = dummysh;
+ }
+ ssdissolve(oldbc);
+ }
+ spivot(oldca, cacasout);
+ sspivot(oldca, ca);
+ if (ca.sh != dummysh) {
+ // 'ca' is a subsegment.
+ assert(cacasout.sh != dummysh);
+ if (oldca.sh != cacasout.sh) {
+ // 'oldca' is not self-bonded.
+ spinsh = cacasout;
+ do {
+ cacasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != oldca.sh);
+ } else {
+ cacasout.sh = dummysh;
+ }
+ ssdissolve(oldca);
+ }
+ spivot(oldad, adcasout);
+ sspivot(oldad, ad);
+ if (ad.sh != dummysh) {
+ // 'ad' is a subsegment.
+ assert(adcasout.sh != dummysh);
+ if (oldad.sh != adcasout.sh) {
+ // 'adcasout' is not self-bonded.
+ spinsh = adcasout;
+ do {
+ adcasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != oldad.sh);
+ } else {
+ adcasout.sh = dummysh;
+ }
+ ssdissolve(oldad);
+ }
+ spivot(olddb, dbcasout);
+ sspivot(olddb, db);
+ if (db.sh != dummysh) {
+ // 'db' is a subsegment.
+ assert(dbcasout.sh != dummysh);
+ if (olddb.sh != dbcasout.sh) {
+ // 'dbcasout' is not self-bonded.
+ spinsh = dbcasout;
+ do {
+ dbcasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != olddb.sh);
+ } else {
+ dbcasout.sh = dummysh;
+ }
+ ssdissolve(olddb);
+ }
+
+ // Rotate abc and bad one-quarter turn counterclockwise.
+ if (ca.sh != dummysh) {
+ if (cacasout.sh != dummysh) {
+ sbond1(cacasin, oldbc);
+ sbond1(oldbc, cacasout);
+ } else {
+ // Bond 'oldbc' to itself.
+ sbond(oldbc, oldbc);
+ // Make sure that dummysh always correctly bonded.
+ dummysh[0] = sencode(oldbc);
+ }
+ ssbond(oldbc, ca);
+ } else {
+ sbond(oldbc, cacasout);
+ }
+ if (ad.sh != dummysh) {
+ if (adcasout.sh != dummysh) {
+ sbond1(adcasin, oldca);
+ sbond1(oldca, adcasout);
+ } else {
+ // Bond 'oldca' to itself.
+ sbond(oldca, oldca);
+ // Make sure that dummysh always correctly bonded.
+ dummysh[0] = sencode(oldca);
+ }
+ ssbond(oldca, ad);
+ } else {
+ sbond(oldca, adcasout);
+ }
+ if (db.sh != dummysh) {
+ if (dbcasout.sh != dummysh) {
+ sbond1(dbcasin, oldad);
+ sbond1(oldad, dbcasout);
+ } else {
+ // Bond 'oldad' to itself.
+ sbond(oldad, oldad);
+ // Make sure that dummysh always correctly bonded.
+ dummysh[0] = sencode(oldad);
+ }
+ ssbond(oldad, db);
+ } else {
+ sbond(oldad, dbcasout);
+ }
+ if (bc.sh != dummysh) {
+ if (bccasout.sh != dummysh) {
+ sbond1(bccasin, olddb);
+ sbond1(olddb, bccasout);
+ } else {
+ // Bond 'olddb' to itself.
+ sbond(olddb, olddb);
+ // Make sure that dummysh always correctly bonded.
+ dummysh[0] = sencode(olddb);
+ }
+ ssbond(olddb, bc);
+ } else {
+ sbond(olddb, bccasout);
+ }
+
+ // New vertex assignments for the rotated subfaces.
+ setsorg(abc, pd); // Update abc to dca.
+ setsdest(abc, pc);
+ setsapex(abc, pa);
+ setsorg(bad, pc); // Update bad to cdb.
+ setsdest(bad, pd);
+ setsapex(bad, pb);
+
+ if (flipqueue != (queue *) NULL) {
+ enqueueflipedge(bccasout, flipqueue);
+ enqueueflipedge(cacasout, flipqueue);
+ enqueueflipedge(adcasout, flipqueue);
+ enqueueflipedge(dbcasout, flipqueue);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// flip() Flips non-locally Delaunay faces in flipqueue until it is empty.//
+// //
+// Assumpation: Current tetrahedralization is non-Delaunay after inserting //
+// a point or performing a flip operation, all possibly non-Delaunay faces //
+// are in 'flipqueue'. //
+// //
+// If 'plastflip' is not NULL, it is used to return a stack of recently //
+// flipped faces. This stack will be used to reverse the flips done in this //
+// routine later for removing a newly inserted point because it encroaches //
+// any subfaces or subsegments. //
+// //
+// Flags 'chkencsegs', 'chkencsubs', and 'chkbadqual' are used for Delaunay //
+// refinement. If a face is determined to be locally Delaunay or unflipable, //
+// 'chkencsegs' indicates to detect and queue encroach segment. 'chkencsubs' //
+// demands to test and queue the bad quality or encroached subface. The tets //
+// will be queued for quality check if 'chkbadqual' is TRUE. //
+// //
+// The return value is the total number of flips done during this invocation.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+long tetgenmesh::
+flip(queue* flipqueue, badface **plastflip, bool chkencsegs, bool chkencsubs,
+ bool chkbadqual)
+{
+ badface *qface;
+ badface *newflip;
+ triface flipface, symface;
+ face checkseg, checksh;
+ enum fliptype fc;
+ bool flipped;
+ REAL sign, bakepsilon;
+ long flipcount, maxfaces;
+ int epscount, fcount;
+ int i;
+
+ if (b->verbose > 1) {
+ printf(" Do flipface queue: %ld faces.\n", flipqueue->len());
+ }
+
+ flipcount = flip23s + flip32s + flip22s + flip44s;
+ if (checksubfaces) {
+ maxfaces = (4l * tetrahedrons->items + hullsize) / 2l;
+ fcount = 0;
+ }
+
+ if (plastflip != (badface **) NULL) {
+ // Initialize the stack of the flip sequence.
+ flipstackers->restart();
+ *plastflip = (badface *) NULL;
+ }
+
+ // Loop until the queue is empty.
+ while (!flipqueue->empty()) {
+ qface = (badface *) flipqueue->pop();
+ flipface = qface->tt;
+ // Check the validity of this face.
+ if (isdead(&flipface) || flipface.tet == dummytet ||
+ (org(flipface) != qface->forg) ||
+ (dest(flipface) != qface->fdest) ||
+ (apex(flipface) != qface->fapex) ||
+ (oppo(flipface) == (point) NULL)) continue;
+ flipped = false;
+ sym(flipface, symface);
+ // Only do check when the adjacent tet exists and it's not a "fake" tet.
+ if (symface.tet != dummytet && oppo(symface) != (point) NULL) {
+ // For positive orientation that insphere() test requires.
+ adjustedgering(flipface, CW);
+ sign = insphere(org(flipface), dest(flipface), apex(flipface),
+ oppo(flipface), oppo(symface));
+ } else {
+ sign = -1.0; // A hull face is locally Delaunay.
+ }
+ if (sign > 0.0) {
+ // 'flipface' is non-locally Delaunay, try to flip it.
+ if (checksubfaces) {
+ fcount++;
+ assert(fcount < maxfaces);
+ bakepsilon = b->epsilon;
+ epscount = 0;
+ while (epscount < 32) {
+ fc = categorizeface(flipface);
+ if (fc == NONCONVEX) {
+ b->epsilon *= 1e-1;
+ epscount++;
+ continue;
+ }
+ break;
+ }
+ b->epsilon = bakepsilon;
+ if (epscount >= 32) {
+ if (b->verbose) {
+ printf("Warning: Can't flip a degenerate tetrahedron.\n");
+ }
+ fc = NONCONVEX;
+ }
+ } else {
+ fc = categorizeface(flipface);
+ assert(fc != NONCONVEX);
+ }
+ switch (fc) {
+ // The following face types are flipable.
+ case T44:
+ case T22:
+ flip22(&flipface, flipqueue);
+ flipped = true;
+ break;
+ case T23:
+ flip23(&flipface, flipqueue);
+ flipped = true;
+ break;
+ case T32:
+ flip32(&flipface, flipqueue);
+ flipped = true;
+ break;
+ // The following face types are unflipable.
+ case UNFLIPABLE:
+ break;
+ case FORBIDDENFACE:
+ // Meet an encroaching subface, unflipable.
+ break;
+ case FORBIDDENEDGE:
+ // Meet an encroaching subsegment, unflipable.
+ break;
+ // This case is only possible when the domain is nonconvex.
+ case NONCONVEX:
+ // assert(nonconvex);
+ break;
+ }
+ if (plastflip != (badface **) NULL && flipped) {
+ // Push the flipped face into stack.
+ newflip = (badface *) flipstackers->alloc();
+ newflip->tt = flipface;
+ newflip->key = (REAL) fc;
+ newflip->forg = org(flipface);
+ newflip->fdest = dest(flipface);
+ newflip->fapex = apex(flipface);
+ newflip->previtem = *plastflip;
+ *plastflip = newflip;
+ }
+ }
+ if (!flipped) {
+ if (chkencsegs) {
+ assert(badsubsegs != (memorypool *) NULL);
+ // Check for encroaching subsegments, add them into list.
+ for (i = 0; i < 3; i++) {
+ tsspivot(&flipface, &checkseg);
+ if (checkseg.sh != dummysh) {
+ if (!shell2badface(checkseg)) {
+ if (varconstraint && (areabound(checkseg) > 0.0)) {
+ checkseg4badqual(&checkseg, true);
+ }
+ }
+ if (!shell2badface(checkseg)) {
+ checkseg4encroach(&checkseg, NULL, NULL, true);
+ }
+ }
+ enextself(flipface);
+ }
+ }
+ if (chkencsubs) {
+ assert(badsubfaces != (memorypool *) NULL);
+ // Check for encroaching subface, add it into list.
+ tspivot(flipface, checksh);
+ if (checksh.sh != dummysh) {
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true);
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true);
+ }
+ }
+ }
+ if (chkbadqual) {
+ // Put the tetrahedra at both sides into list for quality check.
+ qualchecktetlist->append(&flipface);
+ if (symface.tet != dummytet) {
+ qualchecktetlist->append(&symface);
+ }
+ }
+ }
+ }
+
+ flipcount = flip23s + flip32s + flip22s + flip44s - flipcount;
+ if (b->verbose > 1) {
+ printf(" %ld flips.\n", flipcount);
+ }
+
+ return flipcount;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// undoflip() Undo the most recent flip sequence induced by flip(). //
+// //
+// 'lastflip' is the stack of recently flipped faces. Walks through the list //
+// of flips, in the reverse of the order in which they were done, and undoes //
+// them. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::undoflip(badface *lastflip)
+{
+ enum fliptype fc;
+
+ while (lastflip != (badface *) NULL) {
+ // Get the right flipped face.
+ findface(&lastflip->tt, lastflip->forg, lastflip->fdest, lastflip->fapex);
+ fc = (enum fliptype) (int) lastflip->key;
+ switch (fc) {
+ case T23:
+ // The reverse operation of T23 is T32.
+ flip32(&lastflip->tt, NULL);
+ break;
+ case T32:
+ // The reverse operation of T32 is T23.
+ flip23(&lastflip->tt, NULL);
+ break;
+ case T22:
+ case T44:
+ // The reverse operation of T22 or T44 is again T22 or T44.
+ flip22(&lastflip->tt, NULL);
+ break;
+ }
+ // Go on and process the next transformation.
+ lastflip = lastflip->previtem;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// splittetrahedron() Insert a point into a tetrahedron, split it into //
+// four tetrahedra. //
+// //
+// The tetrahedron is given by 'splittet'. Let it is abcd. The inserting //
+// point 'newpoint' v should lie strictly inside abcd. //
+// //
+// Splitting a tetrahedron is to shrink abcd to abcv, and create three new //
+// tetrahedra badv, cbdv, and acdv. //
+// //
+// On completion, 'splittet' returns abcv. If 'flipqueue' is not NULL, it //
+// contains all possibly non-locally Delaunay faces. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+splittetrahedron(point newpoint, triface* splittet, queue* flipqueue)
+{
+ triface oldabd, oldbcd, oldcad; // Old configuration.
+ triface abdcasing, bcdcasing, cadcasing;
+ face abdsh, bcdsh, cadsh;
+ triface abcv, badv, cbdv, acdv; // New configuration.
+ point pa, pb, pc, pd;
+ REAL attrib, volume;
+ int i;
+
+ abcv = *splittet;
+ abcv.ver = 0;
+ // Set the changed vertices and new tetrahedron.
+ pa = org(abcv);
+ pb = dest(abcv);
+ pc = apex(abcv);
+ pd = oppo(abcv);
+
+ if (b->verbose > 1) {
+ printf(" Inserting point %d in tetrahedron (%d, %d, %d, %d).\n",
+ pointmark(newpoint), pointmark(pa), pointmark(pb), pointmark(pc),
+ pointmark(pd));
+ }
+
+ fnext(abcv, oldabd);
+ enextfnext(abcv, oldbcd);
+ enext2fnext(abcv, oldcad);
+ sym(oldabd, abdcasing);
+ sym(oldbcd, bcdcasing);
+ sym(oldcad, cadcasing);
+ maketetrahedron(&badv);
+ maketetrahedron(&cbdv);
+ maketetrahedron(&acdv);
+
+ // Set 'badv' vertices.
+ setorg (badv, pb);
+ setdest(badv, pa);
+ setapex(badv, pd);
+ setoppo(badv, newpoint);
+ // Set 'cbdv' vertices.
+ setorg (cbdv, pc);
+ setdest(cbdv, pb);
+ setapex(cbdv, pd);
+ setoppo(cbdv, newpoint);
+ // Set 'acdv' vertices.
+ setorg (acdv, pa);
+ setdest(acdv, pc);
+ setapex(acdv, pd);
+ setoppo(acdv, newpoint);
+ // Set 'abcv' vertices
+ setoppo(abcv, newpoint);
+
+ // Set the element attributes of the new tetrahedra.
+ for (i = 0; i < in->numberoftetrahedronattributes; i++) {
+ attrib = elemattribute(abcv.tet, i);
+ setelemattribute(badv.tet, i, attrib);
+ setelemattribute(cbdv.tet, i, attrib);
+ setelemattribute(acdv.tet, i, attrib);
+ }
+ // Set the volume constraint of the new tetrahedra.
+ if (b->varvolume) {
+ volume = volumebound(abcv.tet);
+ setvolumebound(badv.tet, volume);
+ setvolumebound(cbdv.tet, volume);
+ setvolumebound(acdv.tet, volume);
+ }
+
+ // Bond the new triangles to the surrounding tetrahedron.
+ bond(badv, abdcasing);
+ bond(cbdv, bcdcasing);
+ bond(acdv, cadcasing);
+ // There may exist subfaces need to be bonded to the new tetrahedra.
+ if (checksubfaces) {
+ tspivot(oldabd, abdsh);
+ if (abdsh.sh != dummysh) {
+ tsdissolve(oldabd);
+ tsbond(badv, abdsh);
+ }
+ tspivot(oldbcd, bcdsh);
+ if (bcdsh.sh != dummysh) {
+ tsdissolve(oldbcd);
+ tsbond(cbdv, bcdsh);
+ }
+ tspivot(oldcad, cadsh);
+ if (cadsh.sh != dummysh) {
+ tsdissolve(oldcad);
+ tsbond(acdv, cadsh);
+ }
+ }
+ badv.loc = 3;
+ cbdv.loc = 2;
+ bond(badv, cbdv);
+ cbdv.loc = 3;
+ acdv.loc = 2;
+ bond(cbdv, acdv);
+ acdv.loc = 3;
+ badv.loc = 2;
+ bond(acdv, badv);
+ badv.loc = 1;
+ bond(badv, oldabd);
+ cbdv.loc = 1;
+ bond(cbdv, oldbcd);
+ acdv.loc = 1;
+ bond(acdv, oldcad);
+
+ badv.loc = 0;
+ cbdv.loc = 0;
+ acdv.loc = 0;
+ if (b->verbose > 3) {
+ printf(" Updating abcv ");
+ printtet(&abcv);
+ printf(" Creating badv ");
+ printtet(&badv);
+ printf(" Creating cbdv ");
+ printtet(&cbdv);
+ printf(" Creating acdv ");
+ printtet(&acdv);
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ enqueueflipface(abcv, flipqueue);
+ enqueueflipface(badv, flipqueue);
+ enqueueflipface(cbdv, flipqueue);
+ enqueueflipface(acdv, flipqueue);
+ }
+
+ // Save a handle for quick point location.
+ recenttet = abcv;
+ // Set the return handle be abcv.
+ *splittet = abcv;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// unsplittetrahedron() Reverse the operation of inserting a point into a //
+// tetrahedron, so as to remove the newly inserted //
+// point from the mesh. //
+// //
+// Assume the origional tetrahedron is abcd, it was split by v into four //
+// tetrahedra abcv, badv, cbdv, and acdv. 'splittet' represents face abc of //
+// abcv (i.e., its opposite is v). //
+// //
+// Point v is removed by expanding abcv to abcd, deleting three tetrahedra //
+// badv, cbdv and acdv. On return, point v is not deleted in this routine. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::unsplittetrahedron(triface* splittet)
+{
+ triface abcv, badv, cbdv, acdv;
+ triface oldabv, oldbcv, oldcav;
+ triface badcasing, cbdcasing, acdcasing;
+ face badsh, cbdsh, acdsh;
+
+ abcv = *splittet;
+ adjustedgering(abcv, CCW); // for sure.
+ fnext(abcv, oldabv);
+ fnext(oldabv, badv);
+ esymself(badv);
+ enextfnext(abcv, oldbcv);
+ fnext(oldbcv, cbdv);
+ esymself(cbdv);
+ enext2fnext(abcv, oldcav);
+ fnext(oldcav, acdv);
+ esymself(acdv);
+
+ if (b->verbose > 1) {
+ printf(" Removing point %d in tetrahedron (%d, %d, %d, %d).\n",
+ pointmark(oppo(abcv)), pointmark(org(abcv)), pointmark(dest(abcv)),
+ pointmark(apex(abcv)), pointmark(apex(badv)));
+ }
+
+ sym(badv, badcasing);
+ tspivot(badv, badsh);
+ sym(cbdv, cbdcasing);
+ tspivot(cbdv, cbdsh);
+ sym(acdv, acdcasing);
+ tspivot(acdv, acdsh);
+
+ // Expanding abcv to abcd.
+ setoppo(abcv, apex(badv));
+ bond(oldabv, badcasing);
+ if (badsh.sh != dummysh) {
+ tsbond(oldabv, badsh);
+ }
+ bond(oldbcv, cbdcasing);
+ if (cbdsh.sh != dummysh) {
+ tsbond(oldbcv, cbdsh);
+ }
+ bond(oldcav, acdcasing);
+ if (acdsh.sh != dummysh) {
+ tsbond(oldcav, acdsh);
+ }
+
+ // Delete the three split-out tetrahedra.
+ tetrahedrondealloc(badv.tet);
+ tetrahedrondealloc(cbdv.tet);
+ tetrahedrondealloc(acdv.tet);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// splittetface() Insert a point on a face of a mesh. //
+// //
+// 'splittet' is the splitting face. Let it is abcd, where abc is the face //
+// will be split. If abc is not a hull face, abce is the tetrahedron at the //
+// opposite of d. //
+// //
+// To split face abc by a point v is to shrink the tetrahedra abcd to abvd, //
+// create two new tetrahedra bcvd, cavd. If abc is not a hull face, shrink //
+// the tetrahedra bace to bave, create two new tetrahedra cbve, acve. //
+// //
+// If abc is a subface, it is split into three subfaces simultaneously by //
+// calling routine splitsubface(), hence, abv, bcv, cav. The edge rings of //
+// the split subfaces have the same orientation as abc's. //
+// //
+// On completion, 'splittet' returns abvd. If 'flipqueue' is not NULL, it //
+// contains all possibly non-locally Delaunay faces. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+splittetface(point newpoint, triface* splittet, queue* flipqueue)
+{
+ triface abcd, bace; // Old configuration.
+ triface oldbcd, oldcad, oldace, oldcbe;
+ triface bcdcasing, cadcasing, acecasing, cbecasing;
+ face abcsh, bcdsh, cadsh, acesh, cbesh;
+ triface abvd, bcvd, cavd, bave, cbve, acve; // New configuration.
+ point pa, pb, pc, pd, pe;
+ REAL attrib, volume;
+ bool mirrorflag;
+ int i;
+
+ abcd = *splittet;
+ // abcd.ver = 0; // Adjust to be CCW edge ring.
+ adjustedgering(abcd, CCW);
+ pa = org(abcd);
+ pb = dest(abcd);
+ pc = apex(abcd);
+ pd = oppo(abcd);
+ // Is there a second tetrahderon?
+ mirrorflag = issymexist(&abcd);
+ if (mirrorflag) {
+ // This is an interior face.
+ sym(abcd, bace);
+ findedge(&bace, dest(abcd), org(abcd));
+ pe = oppo(bace);
+ }
+ if (checksubfaces) {
+ // Is there a subface need to be split together?
+ tspivot(abcd, abcsh);
+ if (abcsh.sh != dummysh) {
+ // Exists! Keep the edge ab of both handles be the same.
+ findedge(&abcsh, org(abcd), dest(abcd));
+ }
+ }
+
+ if (b->verbose > 1) {
+ printf(" Inserting point %d on face (%d, %d, %d).\n", pointmark(newpoint),
+ pointmark(pa), pointmark(pb), pointmark(pc));
+ }
+
+#ifdef SELF_CHECK
+ // Make sure no inversed tetrahedron has been created.
+ assert(orient3d(pa, pb, pd, newpoint) >= 0.0);
+ assert(orient3d(pb, pc, pd, newpoint) >= 0.0);
+ assert(orient3d(pc, pa, pd, newpoint) >= 0.0);
+#endif
+
+ // Save the old configuration at faces bcd and cad.
+ enextfnext(abcd, oldbcd);
+ enext2fnext(abcd, oldcad);
+ sym(oldbcd, bcdcasing);
+ sym(oldcad, cadcasing);
+ // Create two new tetrahedra.
+ maketetrahedron(&bcvd);
+ maketetrahedron(&cavd);
+ if (mirrorflag) {
+ // Save the old configuration at faces bce and cae.
+ enextfnext(bace, oldace);
+ enext2fnext(bace, oldcbe);
+ sym(oldace, acecasing);
+ sym(oldcbe, cbecasing);
+ // Create two new tetrahedra.
+ maketetrahedron(&acve);
+ maketetrahedron(&cbve);
+ } else {
+ // Splitting a boundary face increases the number of boundary faces.
+ hullsize += 2;
+ }
+
+ // Set vertices to the changed tetrahedron and new tetrahedra.
+ abvd = abcd; // Update 'abcd' to 'abvd'.
+ setapex(abvd, newpoint);
+ setorg (bcvd, pb); // Set 'bcvd'.
+ setdest(bcvd, pc);
+ setapex(bcvd, newpoint);
+ setoppo(bcvd, pd);
+ setorg (cavd, pc); // Set 'cavd'.
+ setdest(cavd, pa);
+ setapex(cavd, newpoint);
+ setoppo(cavd, pd);
+ // Set the element attributes of the new tetrahedra.
+ for (i = 0; i < in->numberoftetrahedronattributes; i++) {
+ attrib = elemattribute(abvd.tet, i);
+ setelemattribute(bcvd.tet, i, attrib);
+ setelemattribute(cavd.tet, i, attrib);
+ }
+ if (b->varvolume) {
+ // Set the area constraint of the new tetrahedra.
+ volume = volumebound(abvd.tet);
+ setvolumebound(bcvd.tet, volume);
+ setvolumebound(cavd.tet, volume);
+ }
+ if (mirrorflag) {
+ bave = bace; // Update 'bace' to 'bave'.
+ setapex(bave, newpoint);
+ setorg (acve, pa); // Set 'acve'.
+ setdest(acve, pc);
+ setapex(acve, newpoint);
+ setoppo(acve, pe);
+ setorg (cbve, pc); // Set 'cbve'.
+ setdest(cbve, pb);
+ setapex(cbve, newpoint);
+ setoppo(cbve, pe);
+ // Set the element attributes of the new tetrahedra.
+ for (i = 0; i < in->numberoftetrahedronattributes; i++) {
+ attrib = elemattribute(bave.tet, i);
+ setelemattribute(acve.tet, i, attrib);
+ setelemattribute(cbve.tet, i, attrib);
+ }
+ if (b->varvolume) {
+ // Set the area constraint of the new tetrahedra.
+ volume = volumebound(bave.tet);
+ setvolumebound(acve.tet, volume);
+ setvolumebound(cbve.tet, volume);
+ }
+ }
+
+ // Bond the new tetrahedra to the surrounding tetrahedra.
+ bcvd.loc = 1;
+ bond(bcvd, bcdcasing);
+ cavd.loc = 1;
+ bond(cavd, cadcasing);
+ bcvd.loc = 3;
+ bond(bcvd, oldbcd);
+ cavd.loc = 2;
+ bond(cavd, oldcad);
+ bcvd.loc = 2;
+ cavd.loc = 3;
+ bond(bcvd, cavd);
+ if (mirrorflag) {
+ acve.loc = 1;
+ bond(acve, acecasing);
+ cbve.loc = 1;
+ bond(cbve, cbecasing);
+ acve.loc = 3;
+ bond(acve, oldace);
+ cbve.loc = 2;
+ bond(cbve, oldcbe);
+ acve.loc = 2;
+ cbve.loc = 3;
+ bond(acve, cbve);
+ // Bond two new coplanar facets.
+ bcvd.loc = 0;
+ cbve.loc = 0;
+ bond(bcvd, cbve);
+ cavd.loc = 0;
+ acve.loc = 0;
+ bond(cavd, acve);
+ }
+
+ // There may exist subface needed to be bonded to the new tetrahedra.
+ if (checksubfaces) {
+ tspivot(oldbcd, bcdsh);
+ if (bcdsh.sh != dummysh) {
+ tsdissolve(oldbcd);
+ bcvd.loc = 1;
+ tsbond(bcvd, bcdsh);
+ }
+ tspivot(oldcad, cadsh);
+ if (cadsh.sh != dummysh) {
+ tsdissolve(oldcad);
+ cavd.loc = 1;
+ tsbond(cavd, cadsh);
+ }
+ if (mirrorflag) {
+ tspivot(oldace, acesh);
+ if (acesh.sh != dummysh) {
+ tsdissolve(oldace);
+ acve.loc = 1;
+ tsbond(acve, acesh);
+ }
+ tspivot(oldcbe, cbesh);
+ if (cbesh.sh != dummysh) {
+ tsdissolve(oldcbe);
+ cbve.loc = 1;
+ tsbond(cbve, cbesh);
+ }
+ }
+ // Is there a subface needs to be split together?
+ if (abcsh.sh != dummysh) {
+ // Split this subface 'abc' into three i.e, abv, bcv, cav.
+ splitsubface(newpoint, &abcsh, (queue *) NULL);
+ }
+ }
+
+ // Save a handle for quick point location.
+ recenttet = abvd;
+ // Set the return handle be abvd.
+ *splittet = abvd;
+
+ bcvd.loc = 0;
+ cavd.loc = 0;
+ if (mirrorflag) {
+ cbve.loc = 0;
+ acve.loc = 0;
+ }
+ if (b->verbose > 3) {
+ printf(" Updating abvd ");
+ printtet(&abvd);
+ printf(" Creating bcvd ");
+ printtet(&bcvd);
+ printf(" Creating cavd ");
+ printtet(&cavd);
+ if (mirrorflag) {
+ printf(" Updating bave ");
+ printtet(&bave);
+ printf(" Creating cbve ");
+ printtet(&cbve);
+ printf(" Creating acve ");
+ printtet(&acve);
+ }
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ fnextself(abvd);
+ enqueueflipface(abvd, flipqueue);
+ fnextself(bcvd);
+ enqueueflipface(bcvd, flipqueue);
+ fnextself(cavd);
+ enqueueflipface(cavd, flipqueue);
+ if (mirrorflag) {
+ fnextself(bave);
+ enqueueflipface(bave, flipqueue);
+ fnextself(cbve);
+ enqueueflipface(cbve, flipqueue);
+ fnextself(acve);
+ enqueueflipface(acve, flipqueue);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// unsplittetface() Reverse the operation of inserting a point on a face, //
+// so as to remove the newly inserted point. //
+// //
+// Assume the original face is abc, the tetrahedron containing abc is abcd. //
+// If abc is not a hull face, bace is the tetrahedron at the opposite of d. //
+// After face abc was split by a point v, tetrahedron abcd had been split //
+// into three tetrahedra, abvd, bcvd, cavd, and bace (if it exists) had been //
+// split into bave, cbve, acve. 'splittet' represents abvd (its apex is v). //
+// //
+// Point v is removed by expanding abvd to abcd, deleting two tetrahedra //
+// bcvd, cavd. Expanding bave(if it exists) to bace, deleting two tetrahedra //
+// cbve, acve. If abv is a subface, routine unsplitsubface() will be called //
+// to reverse the operation of splitting a subface. On completion, point v //
+// is not deleted in this routine. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::unsplittetface(triface* splittet)
+{
+ triface abvd, bcvd, cavd, bave, cbve, acve;
+ triface oldbvd, oldvad, oldvbe, oldave;
+ triface bcdcasing, cadcasing, cbecasing, acecasing;
+ face bcdsh, cadsh, cbesh, acesh;
+ face abvsh;
+ bool mirrorflag;
+
+ abvd = *splittet;
+ adjustedgering(abvd, CCW); // for sure.
+ enextfnext(abvd, oldbvd);
+ fnext(oldbvd, bcvd);
+ esymself(bcvd);
+ enextself(bcvd);
+ enext2fnext(abvd, oldvad);
+ fnext(oldvad, cavd);
+ esymself(cavd);
+ enext2self(cavd);
+ // Is there a second tetrahedron?
+ sym(abvd, bave);
+ mirrorflag = bave.tet != dummytet;
+ if (mirrorflag) {
+ findedge(&bave, dest(abvd), org(abvd));
+ enextfnext(bave, oldave);
+ fnext(oldave, acve);
+ esymself(acve);
+ enextself(acve);
+ enext2fnext(bave, oldvbe);
+ fnext(oldvbe, cbve);
+ esymself(cbve);
+ enext2self(cbve);
+ } else {
+ // Unsplit a hull face decrease the number of boundary faces.
+ hullsize -= 2;
+ }
+ // Is there a subface at abv.
+ tspivot(abvd, abvsh);
+ if (abvsh.sh != dummysh) {
+ // Exists! Keep the edge ab of both handles be the same.
+ findedge(&abvsh, org(abvd), dest(abvd));
+ }
+
+ if (b->verbose > 1) {
+ printf(" Removing point %d on face (%d, %d, %d).\n",
+ pointmark(apex(abvd)), pointmark(org(abvd)), pointmark(dest(abvd)),
+ pointmark(dest(bcvd)));
+ }
+
+ fnextself(bcvd); // bcvd has changed to bcdv.
+ sym(bcvd, bcdcasing);
+ tspivot(bcvd, bcdsh);
+ fnextself(cavd); // cavd has changed to cadv.
+ sym(cavd, cadcasing);
+ tspivot(cavd, cadsh);
+ if (mirrorflag) {
+ fnextself(acve); // acve has changed to acev.
+ sym(acve, acecasing);
+ tspivot(acve, acesh);
+ fnextself(cbve); // cbve has changed to cbev.
+ sym(cbve, cbecasing);
+ tspivot(cbve, cbesh);
+ }
+
+ // Expand abvd to abcd.
+ setapex(abvd, dest(bcvd));
+ bond(oldbvd, bcdcasing);
+ if (bcdsh.sh != dummysh) {
+ tsbond(oldbvd, bcdsh);
+ }
+ bond(oldvad, cadcasing);
+ if (cadsh.sh != dummysh) {
+ tsbond(oldvad, cadsh);
+ }
+ if (mirrorflag) {
+ // Expanding bave to bace.
+ setapex(bave, dest(acve));
+ bond(oldave, acecasing);
+ if (acesh.sh != dummysh) {
+ tsbond(oldave, acesh);
+ }
+ bond(oldvbe, cbecasing);
+ if (cbesh.sh != dummysh) {
+ tsbond(oldvbe, cbesh);
+ }
+ }
+
+ // Unsplit a subface if there exists.
+ if (abvsh.sh != dummysh) {
+ unsplitsubface(&abvsh);
+ }
+
+ // Delete the split-out tetrahedra.
+ tetrahedrondealloc(bcvd.tet);
+ tetrahedrondealloc(cavd.tet);
+ if (mirrorflag) {
+ tetrahedrondealloc(acve.tet);
+ tetrahedrondealloc(cbve.tet);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// splitsubface() Insert a point on a subface, split it into three. //
+// //
+// The subface is 'splitface'. Let it is abc. The inserting point 'newpoint'//
+// v should lie inside abc. If the neighbor tetrahedra of abc exist, i.e., //
+// abcd and bace, they should have been split by routine splittetface() //
+// before calling this routine, so the connection between the new tetrahedra //
+// and new subfaces can be correctly set. //
+// //
+// To split subface abc by point v is to shrink abc to abv, create two new //
+// subfaces bcv and cav. Set the connection between updated and new created //
+// subfaces. If there is a subsegment at edge bc or ca, connection of new //
+// subface (bcv or cav) to its casing subfaces is a face link, 'casingin' is //
+// the predecessor and 'casingout' is the successor. It is important to keep //
+// the orientations of the edge rings of the updated and created subfaces be //
+// the same as abc's. So they have the same orientation as other subfaces of //
+// this facet with respect to the lift point of this facet. //
+// //
+// On completion, 'splitface' returns abv. If 'flipqueue' is not NULL, it //
+// returns all possibly non-Delaunay edges. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+splitsubface(point newpoint, face* splitface, queue* flipqueue)
+{
+ triface abvd, bcvd, cavd, bave, cbve, acve;
+ face abc, oldbc, oldca, bc, ca, spinsh;
+ face bccasin, bccasout, cacasin, cacasout;
+ face abv, bcv, cav;
+ point pa, pb, pc;
+
+ abc = *splitface;
+ // The newly created subfaces will have the same edge ring as abc.
+ adjustedgering(abc, CCW);
+ pa = sorg(abc);
+ pb = sdest(abc);
+ pc = sapex(abc);
+
+ if (b->verbose > 1) {
+ printf(" Inserting point %d on subface (%d, %d, %d).\n",
+ pointmark(newpoint), pointmark(pa), pointmark(pb), pointmark(pc));
+ }
+
+ // Save the old configuration at edge bc and ca. Subsegments may appear
+ // at both sides, save the face links and dissolve them.
+ senext(abc, oldbc);
+ senext2(abc, oldca);
+ spivot(oldbc, bccasout);
+ sspivot(oldbc, bc);
+ if (bc.sh != dummysh) {
+ if (oldbc.sh != bccasout.sh) {
+ // 'oldbc' is not self-bonded.
+ spinsh = bccasout;
+ do {
+ bccasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != oldbc.sh);
+ } else {
+ bccasout.sh = dummysh;
+ }
+ ssdissolve(oldbc);
+ }
+ spivot(oldca, cacasout);
+ sspivot(oldca, ca);
+ if (ca.sh != dummysh) {
+ if (oldca.sh != cacasout.sh) {
+ // 'oldca' is not self-bonded.
+ spinsh = cacasout;
+ do {
+ cacasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != oldca.sh);
+ } else {
+ cacasout.sh = dummysh;
+ }
+ ssdissolve(oldca);
+ }
+ // Create two new subfaces.
+ makeshellface(subfaces, &bcv);
+ makeshellface(subfaces, &cav);
+
+ // Set the vertices of changed and new subfaces.
+ abv = abc; // Update 'abc' to 'abv'.
+ setsapex(abv, newpoint);
+ setsorg(bcv, pb); // Set 'bcv'.
+ setsdest(bcv, pc);
+ setsapex(bcv, newpoint);
+ setsorg(cav, pc); // Set 'cav'.
+ setsdest(cav, pa);
+ setsapex(cav, newpoint);
+ if (b->quality && varconstraint) {
+ // Copy yhr area bound into the new subfaces.
+ setareabound(bcv, areabound(abv));
+ setareabound(cav, areabound(abv));
+ }
+ // Copy the boundary mark into the new subfaces.
+ setshellmark(bcv, shellmark(abv));
+ setshellmark(cav, shellmark(abv));
+ // Copy the subface type into the new subfaces.
+ setshelltype(bcv, shelltype(abv));
+ setshelltype(cav, shelltype(abv));
+ if (checkpbcs) {
+ // Copy the pbcgroup into the new subfaces.
+ setshellpbcgroup(bcv, shellpbcgroup(abv));
+ setshellpbcgroup(cav, shellpbcgroup(abv));
+ }
+ // Bond the new subfaces to the surrounding subfaces.
+ if (bc.sh != dummysh) {
+ if (bccasout.sh != dummysh) {
+ sbond1(bccasin, bcv);
+ sbond1(bcv, bccasout);
+ } else {
+ // Bond 'bcv' to itsself.
+ sbond(bcv, bcv);
+ }
+ ssbond(bcv, bc);
+ } else {
+ sbond(bcv, bccasout);
+ }
+ if (ca.sh != dummysh) {
+ if (cacasout.sh != dummysh) {
+ sbond1(cacasin, cav);
+ sbond1(cav, cacasout);
+ } else {
+ // Bond 'cav' to itself.
+ sbond(cav, cav);
+ }
+ ssbond(cav, ca);
+ } else {
+ sbond(cav, cacasout);
+ }
+ senext2self(bcv);
+ sbond(bcv, oldbc);
+ senextself(cav);
+ sbond(cav, oldca);
+ senext2self(bcv);
+ senextself(cav);
+ sbond(bcv, cav);
+
+ // Bond the new subfaces to the new tetrahedra if they exist.
+ stpivot(abv, abvd);
+ if (abvd.tet != dummytet) {
+ // Get two new tetrahedra and their syms.
+ findedge(&abvd, sorg(abv), sdest(abv));
+ enextfnext(abvd, bcvd);
+ assert(bcvd.tet != dummytet);
+ fnextself(bcvd);
+ enext2fnext(abvd, cavd);
+ assert(cavd.tet != dummytet);
+ fnextself(cavd);
+ // Bond two new subfaces to the two new tetrahedra.
+ tsbond(bcvd, bcv);
+ tsbond(cavd, cav);
+ }
+ // Set the connection at the other sides if the tetrahedra exist.
+ sesymself(abv); // bav
+ stpivot(abv, bave);
+ if (bave.tet != dummytet) {
+ sesymself(bcv); // cbv
+ sesymself(cav); // acv
+ // Get two new tetrahedra and their syms.
+ findedge(&bave, sorg(abv), sdest(abv));
+ enextfnext(bave, acve);
+ assert(acve.tet != dummytet);
+ fnextself(acve);
+ enext2fnext(bave, cbve);
+ assert(cbve.tet != dummytet);
+ fnextself(cbve);
+ // Bond two new subfaces to the two new tetrahedra.
+ tsbond(acve, cav);
+ tsbond(cbve, bcv);
+ }
+
+ bcv.shver = 0;
+ cav.shver = 0;
+ if (b->verbose > 3) {
+ printf(" Updating abv ");
+ printsh(&abv);
+ printf(" Creating bcv ");
+ printsh(&bcv);
+ printf(" Creating cav ");
+ printsh(&cav);
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ enqueueflipedge(abv, flipqueue);
+ enqueueflipedge(bcv, flipqueue);
+ enqueueflipedge(cav, flipqueue);
+ }
+
+ // Set the return handle be abv.
+ *splitface = abv;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// unsplitsubface() Reverse the operation of inserting a point on a //
+// subface, so as to remove the newly inserted point. //
+// //
+// Assume the original subface is abc, it was split by a point v into three //
+// subfaces abv, bcv and cav. 'splitsh' represents abv. //
+// //
+// To remove point v is to expand abv to abc, delete bcv and cav. If edge bc //
+// or ca is a subsegment, the connection at a subsegment is a subface link, //
+// '-casin' and '-casout' are used to save the predecessor and successor of //
+// bcv or cav. On completion, point v is not deleted in this routine. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::unsplitsubface(face* splitsh)
+{
+ face abv, bcv, cav;
+ face oldbv, oldva, bc, ca, spinsh;
+ face bccasin, bccasout, cacasin, cacasout;
+
+ abv = *splitsh;
+ senext(abv, oldbv);
+ spivot(oldbv, bcv);
+ if (sorg(bcv) != sdest(oldbv)) {
+ sesymself(bcv);
+ }
+ senextself(bcv);
+ senext2(abv, oldva);
+ spivot(oldva, cav);
+ if (sorg(cav) != sdest(oldva)) {
+ sesymself(cav);
+ }
+ senext2self(cav);
+
+ if (b->verbose > 1) {
+ printf(" Removing point %d on subface (%d, %d, %d).\n",
+ pointmark(sapex(abv)), pointmark(sorg(abv)), pointmark(sdest(abv)),
+ pointmark(sdest(bcv)));
+ }
+
+ spivot(bcv, bccasout);
+ sspivot(bcv, bc);
+ if (bc.sh != dummysh) {
+ if (bcv.sh != bccasout.sh) {
+ // 'bcv' is not self-bonded.
+ spinsh = bccasout;
+ do {
+ bccasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != bcv.sh);
+ } else {
+ bccasout.sh = dummysh;
+ }
+ }
+ spivot(cav, cacasout);
+ sspivot(cav, ca);
+ if (ca.sh != dummysh) {
+ if (cav.sh != cacasout.sh) {
+ // 'cav' is not self-bonded.
+ spinsh = cacasout;
+ do {
+ cacasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != cav.sh);
+ } else {
+ cacasout.sh = dummysh;
+ }
+ }
+
+ // Expand abv to abc.
+ setsapex(abv, sdest(bcv));
+ if (bc.sh != dummysh) {
+ if (bccasout.sh != dummysh) {
+ sbond1(bccasin, oldbv);
+ sbond1(oldbv, bccasout);
+ } else {
+ // Bond 'oldbv' to itself.
+ sbond(oldbv, oldbv);
+ }
+ ssbond(oldbv, bc);
+ } else {
+ sbond(oldbv, bccasout);
+ }
+ if (ca.sh != dummysh) {
+ if (cacasout.sh != dummysh) {
+ sbond1(cacasin, oldva);
+ sbond1(oldva, cacasout);
+ } else {
+ // Bond 'oldva' to itself.
+ sbond(oldva, oldva);
+ }
+ ssbond(oldva, ca);
+ } else {
+ sbond(oldva, cacasout);
+ }
+
+ // Delete two split-out subfaces.
+ shellfacedealloc(subfaces, bcv.sh);
+ shellfacedealloc(subfaces, cav.sh);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// splittetedge() Insert a point on an edge of the mesh. //
+// //
+// The edge is given by 'splittet'. Assume its four corners are a, b, n1 and //
+// n2, where ab is the edge will be split. Around ab may exist any number of //
+// tetrahedra. For convenience, they're ordered in a sequence following the //
+// right-hand rule with your thumb points from a to b. Let the vertex set of //
+// these tetrahedra be {a, b, n1, n2, ..., n(i)}. NOTE the tetrahedra around //
+// ab may not connect to each other (can only happen when ab is a subsegment,//
+// hence some faces abn(i) are subfaces). If ab is a subsegment, abn1 must //
+// be a subface. //
+// //
+// To split edge ab by a point v is to split all tetrahedra containing ab by //
+// v. More specifically, for each such tetrahedron, an1n2b, it is shrunk to //
+// an1n2v, and a new tetrahedra bn2n1v is created. If ab is a subsegment, or //
+// some faces of the splitting tetrahedra are subfaces, they must be split //
+// either by calling routine 'splitsubedge()'. //
+// //
+// On completion, 'splittet' returns avn1n2. If 'flipqueue' is not NULL, it //
+// returns all faces which may become non-Delaunay after this operation. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+splittetedge(point newpoint, triface* splittet, queue* flipqueue)
+{
+ triface *bots, *newtops;
+ triface oldtop, topcasing;
+ triface spintet, tmpbond0, tmpbond1;
+ face abseg, splitsh, topsh, spinsh;
+ point pa, pb, n1, n2;
+ REAL attrib, volume;
+ int wrapcount, hitbdry;
+ int i, j;
+
+ if (checksubfaces) {
+ // Is there a subsegment need to be split together?
+ tsspivot(splittet, &abseg);
+ if (abseg.sh != dummysh) {
+ abseg.shver = 0;
+ // Orient the edge direction of 'splittet' be abseg.
+ if (org(*splittet) != sorg(abseg)) {
+ esymself(*splittet);
+ }
+ }
+ }
+ spintet = *splittet;
+ pa = org(spintet);
+ pb = dest(spintet);
+
+ if (b->verbose > 1) {
+ printf(" Inserting point %d on edge (%d, %d).\n",
+ pointmark(newpoint), pointmark(pa), pointmark(pb));
+ }
+
+ // Collect the tetrahedra containing the splitting edge (ab).
+ n1 = apex(spintet);
+ hitbdry = 0;
+ wrapcount = 1;
+ if (checksubfaces && abseg.sh != dummysh) {
+ // It may happen that some tetrahedra containing ab (a subsegment) are
+ // completely disconnected with others. If it happens, use the face
+ // link of ab to cross the boundary.
+ while (true) {
+ if (!fnextself(spintet)) {
+ // Meet a boundary, walk through it.
+ hitbdry ++;
+ tspivot(spintet, spinsh);
+ assert(spinsh.sh != dummysh);
+ findedge(&spinsh, pa, pb);
+ sfnextself(spinsh);
+ stpivot(spinsh, spintet);
+ assert(spintet.tet != dummytet);
+ findedge(&spintet, pa, pb);
+ // Remember this position (hull face) in 'splittet'.
+ *splittet = spintet;
+ // Split two hull faces increase the hull size;
+ hullsize += 2;
+ }
+ if (apex(spintet) == n1) break;
+ wrapcount ++;
+ }
+ if (hitbdry > 0) {
+ wrapcount -= hitbdry;
+ }
+ } else {
+ // All the tetrahedra containing ab are connected together. If there
+ // are subfaces, 'splitsh' keeps one of them.
+ splitsh.sh = dummysh;
+ while (hitbdry < 2) {
+ if (checksubfaces && splitsh.sh == dummysh) {
+ tspivot(spintet, splitsh);
+ }
+ if (fnextself(spintet)) {
+ if (apex(spintet) == n1) break;
+ wrapcount++;
+ } else {
+ hitbdry ++;
+ if (hitbdry < 2) {
+ esym(*splittet, spintet);
+ }
+ }
+ }
+ if (hitbdry > 0) {
+ // ab is on the hull.
+ wrapcount -= 1;
+ // 'spintet' now is a hull face, inverse its edge direction.
+ esym(spintet, *splittet);
+ // Split two hull faces increases the number of hull faces.
+ hullsize += 2;
+ }
+ }
+
+ // Make arrays of updating (bot, oldtop) and new (newtop) tetrahedra.
+ bots = new triface[wrapcount];
+ newtops = new triface[wrapcount];
+ // Spin around ab, gather tetrahedra and set up new tetrahedra.
+ spintet = *splittet;
+ for (i = 0; i < wrapcount; i++) {
+ // Get 'bots[i] = an1n2b'.
+ enext2fnext(spintet, bots[i]);
+ esymself(bots[i]);
+ // Create 'newtops[i]'.
+ maketetrahedron(&(newtops[i]));
+ // Go to the next.
+ fnextself(spintet);
+ if (checksubfaces && abseg.sh != dummysh) {
+ if (!issymexist(&spintet)) {
+ // We meet a hull face, walk through it.
+ tspivot(spintet, spinsh);
+ assert(spinsh.sh != dummysh);
+ findedge(&spinsh, pa, pb);
+ sfnextself(spinsh);
+ stpivot(spinsh, spintet);
+ assert(spintet.tet != dummytet);
+ findedge(&spintet, pa, pb);
+ }
+ }
+ }
+
+ // Set the vertices of updated and new tetrahedra.
+ for (i = 0; i < wrapcount; i++) {
+ // Update 'bots[i] = an1n2v'.
+ setoppo(bots[i], newpoint);
+ // Set 'newtops[i] = bn2n1v'.
+ n1 = dest(bots[i]);
+ n2 = apex(bots[i]);
+ // Set 'newtops[i]'.
+ setorg(newtops[i], pb);
+ setdest(newtops[i], n2);
+ setapex(newtops[i], n1);
+ setoppo(newtops[i], newpoint);
+ // Set the element attributes of a new tetrahedron.
+ for (j = 0; j < in->numberoftetrahedronattributes; j++) {
+ attrib = elemattribute(bots[i].tet, j);
+ setelemattribute(newtops[i].tet, j, attrib);
+ }
+ if (b->varvolume) {
+ // Set the area constraint of a new tetrahedron.
+ volume = volumebound(bots[i].tet);
+ setvolumebound(newtops[i].tet, volume);
+ }
+#ifdef SELF_CHECK
+ // Make sure no inversed tetrahedron has been created.
+ assert(orient3d(pa, n1, n2, newpoint) <= 0.0);
+ assert(orient3d(pb, n2, n1, newpoint) <= 0.0);
+#endif
+ }
+
+ // Bond newtops to topcasings and bots.
+ for (i = 0; i < wrapcount; i++) {
+ // Get 'oldtop = n1n2va' from 'bots[i]'.
+ enextfnext(bots[i], oldtop);
+ sym(oldtop, topcasing);
+ bond(newtops[i], topcasing);
+ if (checksubfaces) {
+ tspivot(oldtop, topsh);
+ if (topsh.sh != dummysh) {
+ tsdissolve(oldtop);
+ tsbond(newtops[i], topsh);
+ }
+ }
+ enextfnext(newtops[i], tmpbond0);
+ bond(oldtop, tmpbond0);
+ }
+ // Bond between newtops.
+ fnext(newtops[0], tmpbond0);
+ enext2fnext(bots[0], spintet);
+ for (i = 1; i < wrapcount; i ++) {
+ if (issymexist(&spintet)) {
+ enext2fnext(newtops[i], tmpbond1);
+ bond(tmpbond0, tmpbond1);
+ }
+ fnext(newtops[i], tmpbond0);
+ enext2fnext(bots[i], spintet);
+ }
+ // Bond the last to the first if no boundary.
+ if (issymexist(&spintet)) {
+ enext2fnext(newtops[0], tmpbond1);
+ bond(tmpbond0, tmpbond1);
+ }
+
+ // Is there exist subfaces and subsegment need to be split?
+ if (checksubfaces) {
+ if (abseg.sh != dummysh) {
+ // A subsegment needs be split.
+ spivot(abseg, splitsh);
+ assert(splitsh.sh != dummysh);
+ }
+ if (splitsh.sh != dummysh) {
+ // Split subfaces (and subsegment).
+ findedge(&splitsh, pa, pb);
+ splitsubedge(newpoint, &splitsh, (queue *) NULL);
+ }
+ }
+
+ if (b->verbose > 3) {
+ for (i = 0; i < wrapcount; i++) {
+ printf(" Updating bots[%i] ", i);
+ printtet(&(bots[i]));
+ printf(" Creating newtops[%i] ", i);
+ printtet(&(newtops[i]));
+ }
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ for (i = 0; i < wrapcount; i++) {
+ enqueueflipface(bots[i], flipqueue);
+ enqueueflipface(newtops[i], flipqueue);
+ }
+ }
+
+ // Set the return handle be avn1n2. It is got by transforming from
+ // 'bots[0]' (which is an1n2v).
+ fnext(bots[0], spintet); // spintet is an1vn2.
+ esymself(spintet); // spintet is n1avn2.
+ enextself(spintet); // spintet is avn1n2.
+ *splittet = spintet;
+
+ delete [] bots;
+ delete [] newtops;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// unsplittetedge() Reverse the operation of splitting an edge, so as to //
+// remove the newly inserted point. //
+// //
+// Assume the original edge is ab, the tetrahedron containing ab is abn1n2. //
+// After ab was split by a point v, every tetrahedron containing ab (e.g., //
+// abn1n2) has been split into two (e.g., an1n2v and bn2n1v). 'splittet' //
+// represents avn1n2 (i.e., its destination is v). //
+// //
+// To remove point v is to expand each split tetrahedron containing ab (e.g.,//
+// (avn1n2 to abn1n2), then delete the redundant one(e.g., vbn1n2). If there //
+// exists any subface around ab, routine unsplitsubedge() will be called to //
+// reverse the operation of splitting a edge (or a subsegment) of subfaces. //
+// On completion, point v is not deleted in this routine. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::unsplittetedge(triface* splittet)
+{
+ triface *bots, *newtops;
+ triface oldtop, topcasing;
+ triface spintet;
+ face avseg, splitsh, topsh, spinsh;
+ point pa, pv, n1;
+ int wrapcount, hitbdry;
+ int i;
+
+ spintet = *splittet;
+ pa = org(spintet);
+ pv = dest(spintet);
+ if (checksubfaces) {
+ // Is there a subsegment need to be unsplit together?
+ tsspivot(splittet, &avseg);
+ if (avseg.sh != dummysh) {
+ // The subsegment's direction should conform to 'splittet'.
+ if (sorg(avseg) != pa) {
+ sesymself(avseg);
+ }
+ }
+ }
+
+ n1 = apex(spintet);
+ hitbdry = 0;
+ wrapcount = 1;
+ if (checksubfaces && avseg.sh != dummysh) {
+ // It may happen that some tetrahedra containing ab (a subsegment) are
+ // completely disconnected with others. If it happens, use the face
+ // link of ab to cross the boundary.
+ while (true) {
+ if (!fnextself(spintet)) {
+ // Meet a boundary, walk through it.
+ hitbdry ++;
+ tspivot(spintet, spinsh);
+ assert(spinsh.sh != dummysh);
+ findedge(&spinsh, pa, pv);
+ sfnextself(spinsh);
+ stpivot(spinsh, spintet);
+ assert(spintet.tet != dummytet);
+ findedge(&spintet, pa, pv);
+ // Remember this position (hull face) in 'splittet'.
+ *splittet = spintet;
+ // Split two hull faces increase the hull size;
+ hullsize += 2;
+ }
+ if (apex(spintet) == n1) break;
+ wrapcount ++;
+ }
+ if (hitbdry > 0) {
+ wrapcount -= hitbdry;
+ }
+ } else {
+ // All the tetrahedra containing ab are connected together. If there
+ // are subfaces, 'splitsh' keeps one of them.
+ splitsh.sh = dummysh;
+ while (hitbdry < 2) {
+ if (checksubfaces && splitsh.sh == dummysh) {
+ tspivot(spintet, splitsh);
+ }
+ if (fnextself(spintet)) {
+ if (apex(spintet) == n1) break;
+ wrapcount++;
+ } else {
+ hitbdry ++;
+ if (hitbdry < 2) {
+ esym(*splittet, spintet);
+ }
+ }
+ }
+ if (hitbdry > 0) {
+ // ab is on the hull.
+ wrapcount -= 1;
+ // 'spintet' now is a hull face, inverse its edge direction.
+ esym(spintet, *splittet);
+ // Split two hull faces increases the number of hull faces.
+ hullsize += 2;
+ }
+ }
+
+ // Make arrays of updating (bot, oldtop) and new (newtop) tetrahedra.
+ bots = new triface[wrapcount];
+ newtops = new triface[wrapcount];
+ // Spin around av, gather tetrahedra and set up new tetrahedra.
+ spintet = *splittet;
+ for (i = 0; i < wrapcount; i++) {
+ // Get 'bots[i] = an1n2v'.
+ enext2fnext(spintet, bots[i]);
+ esymself(bots[i]);
+ // Get 'oldtop = n1n2va'.
+ enextfnext(bots[i], oldtop);
+ // Get 'newtops[i] = 'bn1n2v'
+ fnext(oldtop, newtops[i]); // newtop = n1n2bv
+ esymself(newtops[i]); // newtop = n2n1bv
+ enext2self(newtops[i]); // newtop = bn2n1v
+ // Go to the next.
+ fnextself(spintet);
+ if (checksubfaces && avseg.sh != dummysh) {
+ if (!issymexist(&spintet)) {
+ // We meet a hull face, walk through it.
+ tspivot(spintet, spinsh);
+ assert(spinsh.sh != dummysh);
+ findedge(&spinsh, pa, pv);
+ sfnextself(spinsh);
+ stpivot(spinsh, spintet);
+ assert(spintet.tet != dummytet);
+ findedge(&spintet, pa, pv);
+ }
+ }
+ }
+
+ if (b->verbose > 1) {
+ printf(" Removing point %d from edge (%d, %d).\n",
+ pointmark(oppo(bots[0])), pointmark(org(bots[0])),
+ pointmark(org(newtops[0])));
+ }
+
+ for (i = 0; i < wrapcount; i++) {
+ // Expand an1n2v to an1n2b.
+ setoppo(bots[i], org(newtops[i]));
+ // Get 'oldtop = n1n2va' from 'bot[i]'.
+ enextfnext(bots[i], oldtop);
+ // Get 'topcasing' from 'newtop[i]'
+ sym(newtops[i], topcasing);
+ // Bond them.
+ bond(oldtop, topcasing);
+ if (checksubfaces) {
+ tspivot(newtops[i], topsh);
+ if (topsh.sh != dummysh) {
+ tsbond(oldtop, topsh);
+ }
+ }
+ // Delete the tetrahedron above an1n2v.
+ tetrahedrondealloc(newtops[i].tet);
+ }
+
+ // If there exists any subface, unsplit them.
+ if (checksubfaces) {
+ if (avseg.sh != dummysh) {
+ spivot(avseg, splitsh);
+ assert(splitsh.sh != dummysh);
+ }
+ if (splitsh.sh != dummysh) {
+ findedge(&splitsh, pa, pv);
+ unsplitsubedge(&splitsh);
+ }
+ }
+
+ delete [] bots;
+ delete [] newtops;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// splitsubedge() Insert a point on an edge of the surface mesh. //
+// //
+// The splitting edge is given by 'splitsh'. Assume its three corners are a, //
+// b, c, where ab is the edge will be split. ab may be a subsegment. //
+// //
+// To split edge ab is to split all subfaces conatining ab. If ab is not a //
+// subsegment, there are only two subfaces need be split, otherwise, there //
+// may have any number of subfaces need be split. Each splitting subface abc //
+// is shrunk to avc, a new subface vbc is created. It is important to keep //
+// the orientations of edge rings of avc and vbc be the same as abc's. If ab //
+// is a subsegment, it is shrunk to av and a new subsegment vb is created. //
+// //
+// If there are tetrahedra adjoining to the splitting subfaces, they should //
+// be split before calling this routine, so the connection between the new //
+// tetrahedra and the new subfaces can be correctly set. //
+// //
+// On completion, 'splitsh' returns avc. If 'flipqueue' is not NULL, it //
+// returns all edges which may be non-Delaunay. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::splitsubedge(point newpoint, face* splitsh, queue* flipqueue)
+{
+ triface abcd, bace, vbcd, bvce;
+ face startabc, spinabc, spinsh;
+ face oldbc, bccasin, bccasout;
+ face ab, bc;
+ face avc, vbc, vbc1;
+ face av, vb;
+ point pa, pb;
+
+ startabc = *splitsh;
+ // Is there a subsegment?
+ sspivot(startabc, ab);
+ if (ab.sh != dummysh) {
+ ab.shver = 0;
+ if (sorg(startabc) != sorg(ab)) {
+ sesymself(startabc);
+ }
+ }
+ pa = sorg(startabc);
+ pb = sdest(startabc);
+
+ if (b->verbose > 1) {
+ printf(" Inserting point %d on subedge (%d, %d) %s.\n",
+ pointmark(newpoint), pointmark(pa), pointmark(pb),
+ (ab.sh != dummysh ? "(seg)" : " "));
+ }
+
+ // Spin arround ab, split every subface containing ab.
+ spinabc = startabc;
+ do {
+ // Adjust spinabc be edge ab.
+ if (sorg(spinabc) != pa) {
+ sesymself(spinabc);
+ }
+ // Save old configuration at edge bc, if bc has a subsegment, save the
+ // face link of it and dissolve it from bc.
+ senext(spinabc, oldbc);
+ spivot(oldbc, bccasout);
+ sspivot(oldbc, bc);
+ if (bc.sh != dummysh) {
+ if (spinabc.sh != bccasout.sh) {
+ // 'spinabc' is not self-bonded.
+ spinsh = bccasout;
+ do {
+ bccasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != oldbc.sh);
+ } else {
+ bccasout.sh = dummysh;
+ }
+ ssdissolve(oldbc);
+ }
+ // Create a new subface.
+ makeshellface(subfaces, &vbc);
+ // Split abc.
+ avc = spinabc; // Update 'abc' to 'avc'.
+ setsdest(avc, newpoint);
+ // Make 'vbc' be in the same edge ring as 'avc'.
+ vbc.shver = avc.shver;
+ setsorg(vbc, newpoint); // Set 'vbc'.
+ setsdest(vbc, pb);
+ setsapex(vbc, sapex(avc));
+ if (b->quality && varconstraint) {
+ // Copy the area bound into the new subface.
+ setareabound(vbc, areabound(avc));
+ }
+ // Copy the shell marker and shell type into the new subface.
+ setshellmark(vbc, shellmark(avc));
+ setshelltype(vbc, shelltype(avc));
+ if (checkpbcs) {
+ // Copy the pbcgroup into the new subface.
+ setshellpbcgroup(vbc, shellpbcgroup(avc));
+ }
+ // Set the connection between updated and new subfaces.
+ senext2self(vbc);
+ sbond(vbc, oldbc);
+ // Set the connection between new subface and casings.
+ senext2self(vbc);
+ if (bc.sh != dummysh) {
+ if (bccasout.sh != dummysh) {
+ // Insert 'vbc' into face link.
+ sbond1(bccasin, vbc);
+ sbond1(vbc, bccasout);
+ } else {
+ // Bond 'vbc' to itself.
+ sbond(vbc, vbc);
+ }
+ ssbond(vbc, bc);
+ } else {
+ sbond(vbc, bccasout);
+ }
+ // Go to next subface at edge ab.
+ spivotself(spinabc);
+ if (spinabc.sh == dummysh) {
+ break; // 'ab' is a hull edge.
+ }
+ } while (spinabc.sh != startabc.sh);
+
+ // Get the new subface vbc above the updated subface avc (= startabc).
+ senext(startabc, oldbc);
+ spivot(oldbc, vbc);
+ if (sorg(vbc) == newpoint) {
+ sesymself(vbc);
+ }
+ assert(sorg(vbc) == sdest(oldbc) && sdest(vbc) == sorg(oldbc));
+ senextself(vbc);
+ // Set the face link for the new created subfaces around edge vb.
+ spinabc = startabc;
+ do {
+ // Go to the next subface at edge av.
+ spivotself(spinabc);
+ if (spinabc.sh == dummysh) {
+ break; // 'ab' is a hull edge.
+ }
+ if (sorg(spinabc) != pa) {
+ sesymself(spinabc);
+ }
+ // Get the new subface vbc1 above the updated subface avc (= spinabc).
+ senext(spinabc, oldbc);
+ spivot(oldbc, vbc1);
+ if (sorg(vbc1) == newpoint) {
+ sesymself(vbc1);
+ }
+ assert(sorg(vbc1) == sdest(oldbc) && sdest(vbc1) == sorg(oldbc));
+ senextself(vbc1);
+ // Set the connection: vbc->vbc1.
+ sbond1(vbc, vbc1);
+ // For the next connection.
+ vbc = vbc1;
+ } while (spinabc.sh != startabc.sh);
+
+ // Split ab if it is a subsegment.
+ if (ab.sh != dummysh) {
+ // Update subsegment ab to av.
+ av = ab;
+ setsdest(av, newpoint);
+ // Create a new subsegment vb.
+ makeshellface(subsegs, &vb);
+ setsorg(vb, newpoint);
+ setsdest(vb, pb);
+ // vb gets the same mark and segment type as av.
+ setshellmark(vb, shellmark(av));
+ setshelltype(vb, shelltype(av));
+ if (b->quality && varconstraint) {
+ // Copy the area bound into the new subsegment.
+ setareabound(vb, areabound(av));
+ }
+ // Save the old connection at ab (re-use the handles oldbc, bccasout).
+ senext(av, oldbc);
+ spivot(oldbc, bccasout);
+ // Bond av and vb (bonded at their "fake" edges).
+ senext2(vb, bccasin);
+ sbond(bccasin, oldbc);
+ if (bccasout.sh != dummysh) {
+ // There is a subsegment connecting with ab at b. It will connect
+ // to vb at b after splitting.
+ bccasout.shver = 0;
+ assert(sorg(bccasout) == pb);
+ senext2self(bccasout);
+ senext(vb, bccasin);
+ sbond(bccasin, bccasout);
+ }
+ // Bond all new subfaces (vbc) to vb.
+ spinabc = startabc;
+ do {
+ // Adjust spinabc be edge av.
+ if (sorg(spinabc) != pa) {
+ sesymself(spinabc);
+ }
+ // Get new subface vbc above the updated subface avc (= spinabc).
+ senext(spinabc, oldbc);
+ spivot(oldbc, vbc);
+ if (sorg(vbc) == newpoint) {
+ sesymself(vbc);
+ }
+ senextself(vbc);
+ // Bond the new subface and the new subsegment.
+ ssbond(vbc, vb);
+ // Go to the next.
+ spivotself(spinabc);
+ assert(spinabc.sh != dummysh);
+ } while (spinabc.sh != startabc.sh);
+ }
+
+ // Bond the new subfaces to new tetrahedra if they exist. New tetrahedra
+ // should have been created before calling this routine.
+ spinabc = startabc;
+ do {
+ // Adjust spinabc be edge av.
+ if (sorg(spinabc) != pa) {
+ sesymself(spinabc);
+ }
+ // Get new subface vbc above the updated subface avc (= spinabc).
+ senext(spinabc, oldbc);
+ spivot(oldbc, vbc);
+ if (sorg(vbc) == newpoint) {
+ sesymself(vbc);
+ }
+ senextself(vbc);
+ // Get the adjacent tetrahedra at 'spinabc'.
+ stpivot(spinabc, abcd);
+ if (abcd.tet != dummytet) {
+ findedge(&abcd, sorg(spinabc), sdest(spinabc));
+ enextfnext(abcd, vbcd);
+ fnextself(vbcd);
+ assert(vbcd.tet != dummytet);
+ tsbond(vbcd, vbc);
+ sym(vbcd, bvce);
+ sesymself(vbc);
+ tsbond(bvce, vbc);
+ } else {
+ // One side is empty, check the other side.
+ sesymself(spinabc);
+ stpivot(spinabc, bace);
+ if (bace.tet != dummytet) {
+ findedge(&bace, sorg(spinabc), sdest(spinabc));
+ enext2fnext(bace, bvce);
+ fnextself(bvce);
+ assert(bvce.tet != dummytet);
+ sesymself(vbc);
+ tsbond(bvce, vbc);
+ }
+ }
+ // Go to the next.
+ spivotself(spinabc);
+ if (spinabc.sh == dummysh) {
+ break; // 'ab' is a hull edge.
+ }
+ } while (spinabc.sh != startabc.sh);
+
+ if (b->verbose > 3) {
+ spinabc = startabc;
+ do {
+ // Adjust spinabc be edge av.
+ if (sorg(spinabc) != pa) {
+ sesymself(spinabc);
+ }
+ printf(" Updating abc:\n");
+ printsh(&spinabc);
+ // Get new subface vbc above the updated subface avc (= spinabc).
+ senext(spinabc, oldbc);
+ spivot(oldbc, vbc);
+ if (sorg(vbc) == newpoint) {
+ sesymself(vbc);
+ }
+ senextself(vbc);
+ printf(" Creating vbc:\n");
+ printsh(&vbc);
+ // Go to the next.
+ spivotself(spinabc);
+ if (spinabc.sh == dummysh) {
+ break; // 'ab' is a hull edge.
+ }
+ } while (spinabc.sh != startabc.sh);
+ }
+
+ if (flipqueue != (queue *) NULL) {
+ spinabc = startabc;
+ do {
+ // Adjust spinabc be edge av.
+ if (sorg(spinabc) != pa) {
+ sesymself(spinabc);
+ }
+ senext2(spinabc, oldbc); // Re-use oldbc.
+ enqueueflipedge(oldbc, flipqueue);
+ // Get new subface vbc above the updated subface avc (= spinabc).
+ senext(spinabc, oldbc);
+ spivot(oldbc, vbc);
+ if (sorg(vbc) == newpoint) {
+ sesymself(vbc);
+ }
+ senextself(vbc);
+ senext(vbc, oldbc); // Re-use oldbc.
+ enqueueflipedge(oldbc, flipqueue);
+ // Go to the next.
+ spivotself(spinabc);
+ if (spinabc.sh == dummysh) {
+ break; // 'ab' is a hull edge.
+ }
+ } while (spinabc.sh != startabc.sh);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// unsplitsubedge() Reverse the operation of splitting an edge of subface,//
+// so as to remove a point from the edge. //
+// //
+// Assume the original edge is ab, the subface containing it is abc. It was //
+// split by a point v into avc, and vbc. 'splitsh' represents avc, further- //
+// more, if av is a subsegment, av should be the zero version of the split //
+// subsegment (i.e., av.shver = 0), so we are sure that the destination (v) //
+// of both avc and av is the deleting point. //
+// //
+// To remove point v is to expand avc to abc, delete vbc, do the same for //
+// other subfaces containing av and vb. If av and vb are subsegments, expand //
+// av to ab, delete vb. On completion, point v is not deleted. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::unsplitsubedge(face* splitsh)
+{
+ face startavc, spinavc, spinbcv;
+ face oldvc, bccasin, bccasout, spinsh;
+ face av, vb, bc;
+ point pa, pv, pb;
+
+ startavc = *splitsh;
+ sspivot(startavc, av);
+ if (av.sh != dummysh) {
+ // Orient the direction of subsegment to conform the subface.
+ if (sorg(av) != sorg(startavc)) {
+ sesymself(av);
+ }
+ assert(av.shver == 0);
+ }
+ senext(startavc, oldvc);
+ spivot(oldvc, vb); // vb is subface vbc
+ if (sorg(vb) != sdest(oldvc)) {
+ sesymself(vb);
+ }
+ senextself(vb);
+ pa = sorg(startavc);
+ pv = sdest(startavc);
+ pb = sdest(vb);
+
+ if (b->verbose > 1) {
+ printf(" Removing point %d from subedge (%d, %d).\n",
+ pointmark(pv), pointmark(pa), pointmark(pb));
+ }
+
+ // Spin arround av, unsplit every subface containing av.
+ spinavc = startavc;
+ do {
+ // Adjust spinavc be edge av.
+ if (sorg(spinavc) != pa) {
+ sesymself(spinavc);
+ }
+ // Save old configuration at edge bc, if bc has a subsegment, save the
+ // face link of it.
+ senext(spinavc, oldvc);
+ spivot(oldvc, spinbcv);
+ if (sorg(spinbcv) != sdest(oldvc)) {
+ sesymself(spinbcv);
+ }
+ senext2self(spinbcv);
+ spivot(spinbcv, bccasout);
+ sspivot(spinbcv, bc);
+ if (bc.sh != dummysh) {
+ if (spinbcv.sh != bccasout.sh) {
+ // 'spinbcv' is not self-bonded.
+ spinsh = bccasout;
+ do {
+ bccasin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != spinbcv.sh);
+ } else {
+ bccasout.sh = dummysh;
+ }
+ }
+ // Expand avc to abc.
+ setsdest(spinavc, pb);
+ if (bc.sh != dummysh) {
+ if (bccasout.sh != dummysh) {
+ sbond1(bccasin, oldvc);
+ sbond1(oldvc, bccasout);
+ } else {
+ // Bond 'oldbc' to itself.
+ sbond(oldvc, oldvc);
+ }
+ ssbond(oldvc, bc);
+ } else {
+ sbond(oldvc, bccasout);
+ }
+ // Delete bcv.
+ shellfacedealloc(subfaces, spinbcv.sh);
+ // Go to next subface at edge av.
+ spivotself(spinavc);
+ if (spinavc.sh == dummysh) {
+ break; // 'av' is a hull edge.
+ }
+ } while (spinavc.sh != startavc.sh);
+
+ // Is there a subsegment need to be unsplit?
+ if (av.sh != dummysh) {
+ senext(av, oldvc); // Re-use oldvc.
+ spivot(oldvc, vb);
+ vb.shver = 0;
+ assert(sdest(av) == sorg(vb));
+ senext(vb, spinbcv); // Re-use spinbcv.
+ spivot(spinbcv, bccasout);
+ // Expand av to ab.
+ setsdest(av, pb);
+ sbond(oldvc, bccasout);
+ // Delete vb.
+ shellfacedealloc(subsegs, vb.sh);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insertsite() Insert a point into the mesh. //
+// //
+// The 'newpoint' is located. If 'searchtet->tet' is not NULL, the search //
+// for the containing tetrahedron begins from 'searchtet', otherwise, a full //
+// point location procedure is called. If 'newpoint' is found inside a //
+// tetrahedron, the tetrahedron is split into four (by splittetrahedron()); //
+// if 'newpoint' lies on a face, the face is split into three, thereby //
+// splitting the two adjacent tetrahedra into six (by splittetface()); if //
+// 'newpoint' lies on an edge, the edge is split into two, thereby, every //
+// tetrahedron containing this edge is split into two. If 'newpoint' lies on //
+// an existing vertex, no action is taken, and the value DUPLICATEPOINT is //
+// returned and 'searchtet' is set to a handle whose origin is the vertex. //
+// //
+// If 'flipqueue' is not NULL, after 'newpoint' is inserted, it returns all //
+// faces which may become non-Delaunay due to the newly inserted point. Flip //
+// operations can be performed as necessary on them to maintain the Delaunay //
+// property. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::insertsiteresult tetgenmesh::
+insertsite(point newpoint, triface* searchtet, bool approx, queue* flipqueue)
+{
+ enum locateresult intersect, exactloc;
+ point checkpt;
+ REAL epspp, checklen;
+ int count;
+
+ if (b->verbose > 1) {
+ printf(" Insert point to mesh: (%.12g, %.12g, %.12g) %d.\n",
+ newpoint[0], newpoint[1], newpoint[2], pointmark(newpoint));
+ }
+
+ if (searchtet->tet == (tetrahedron *) NULL) {
+ // Search for a tetrahedron containing 'newpoint'.
+ searchtet->tet = dummytet;
+ exactloc = locate(newpoint, searchtet);
+ } else {
+ // Start searching from the tetrahedron provided by the caller.
+ exactloc = preciselocate(newpoint, searchtet);
+ }
+ intersect = exactloc;
+ if (approx && (exactloc != ONVERTEX)) {
+ // Adjust the exact location to an approx. location wrt. epsilon.
+ epspp = b->epsilon;
+ count = 0;
+ while (count < 16) {
+ intersect = adjustlocate(newpoint, searchtet, exactloc, epspp);
+ if (intersect == ONVERTEX) {
+ checkpt = org(*searchtet);
+ checklen = distance(checkpt, newpoint);
+ if (checklen / longest > b->epsilon) {
+ epspp *= 1e-2;
+ count++;
+ continue;
+ }
+ }
+ break;
+ }
+ }
+ // Keep current search state for next searching.
+ recenttet = *searchtet;
+
+ // Insert the point using the right routine
+ switch (intersect) {
+ case ONVERTEX:
+ // There's already a vertex there. Return in 'searchtet' a tetrahedron
+ // whose origin is the existing vertex.
+ if (b->verbose > 1) {
+ printf(" Not insert for duplicating point.\n");
+ }
+ return DUPLICATEPOINT;
+
+ case OUTSIDE:
+ if (b->verbose > 1) {
+ printf(" Not insert for locating outside the mesh.\n");
+ }
+ return OUTSIDEPOINT;
+
+ case ONEDGE:
+ // 'newpoint' falls on an edge.
+ splittetedge(newpoint, searchtet, flipqueue);
+ return SUCCESSONEDGE;
+
+ case ONFACE:
+ // 'newpoint' falls on a face.
+ splittetface(newpoint, searchtet, flipqueue);
+ return SUCCESSONFACE;
+
+ case INTETRAHEDRON:
+ // 'newpoint' falls inside a tetrahedron.
+ splittetrahedron(newpoint, searchtet, flipqueue);
+ return SUCCESSINTET;
+ }
+
+ // Impossible case.
+ assert(0);
+ return OUTSIDEPOINT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// undosite() Undo the most recently point insertion. //
+// //
+// 'insresult' indicates in where the newpoint has been inserted, i.e., in a //
+// tetrahedron, on a face, or on an edge. A correspoding routine will be //
+// called to undo the point insertion. 'splittet' is a handle represent one //
+// of the resulting tetrahedra, but it may be changed after transformation, //
+// even may be dead. Four points 'torg', ... 'toppo' are the corners which //
+// 'splittet' should have. On finish, 'newpoint' is not removed. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+undosite(enum insertsiteresult insresult, triface* splittet, point torg,
+ point tdest, point tapex, point toppo)
+{
+ // Set the four corners of 'splittet' exactly be 'torg', ... 'toppo'.
+ findface(splittet, torg, tdest, tapex);
+ if (oppo(*splittet) != toppo) {
+ symself(*splittet);
+ assert(oppo(*splittet) == toppo);
+ // The sym() operation may inverse the edge, correct it if so.
+ findedge(splittet, torg, tdest);
+ }
+
+ // Unsplit the tetrahedron according to 'insresult'.
+ switch (insresult) {
+ case SUCCESSINTET:
+ // 'splittet' should be the face with 'newpoint' as its opposite.
+ unsplittetrahedron(splittet);
+ break;
+ case SUCCESSONFACE:
+ // 'splittet' should be the one of three splitted face with 'newpoint'
+ // as its apex.
+ unsplittetface(splittet);
+ break;
+ case SUCCESSONEDGE:
+ // 'splittet' should be the tet with destination is 'newpoint'.
+ unsplittetedge(splittet);
+ break;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// inserthullsite() Insert a point which is outside the convex hull. //
+// //
+// The inserting point 'inspoint' lies outside the tetrahedralization.'horiz'//
+// is one of the convex hull faces which are visible from it. (You can image //
+// that is is parallel to the horizon). To insert a point outside the convex //
+// hull we have to enlarge current convex hull of the tetrahedralization for //
+// including this point. This routine collects convex hull faces which are //
+// visible from the inserting point, constructs new tetrahedra from these //
+// faces and the inserting point. On return, 'inspoint' has become a vertex //
+// of the augmented tetrahedralization. The convex hull has been updated. //
+// 'flipcheckqueue' returns the old convex hull faces which may become non- //
+// Delaunay and need be flipped. //
+// //
+// The caller can optionally provide two variables. 'hulllink' is a link for //
+// saving newly created hull faces (containing 'inspoint') which may not //
+// convex. Non-convex hull faces will be detected and finished by mounting //
+// new tetrahedra with other hull vertex near them. 'worklist' is an array, //
+// used for face matching. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+inserthullsite(point inspoint, triface* horiz, queue* flipqueue,
+ link* hulllink, int* worklist)
+{
+ link *myhulllink;
+ triface newtet, hullface;
+ triface oldhull, newhull;
+ point workpt[3];
+ bool finished;
+ int *myworklist;
+ int idx, share;
+ int i, j, k;
+
+ if (b->verbose > 1) {
+ printf(" Collect visible convex hull faces.\n");
+ }
+
+ // Check if the 'hulllink' is provided by the caller.
+ if (hulllink != (link *) NULL) {
+ myhulllink = (link *) NULL;
+ } else {
+ myhulllink = new link(sizeof(triface), NULL, 256);
+ hulllink = myhulllink;
+ }
+
+ // Check if the 'worklist' is provided by the caller.
+ if (worklist != (int *) NULL) {
+ myworklist = (int *) NULL;
+ } else {
+ myworklist = new int[points->items];
+ for (i = 0; i < points->items; i++) myworklist[i] = 0;
+ worklist = myworklist;
+ }
+
+ adjustedgering(*horiz, CW);
+ // Create a new tetrahedron from 'horiz' and 'inspoint'.
+ maketetrahedron(&newtet);
+ setorg (newtet, org(*horiz));
+ setdest(newtet, dest(*horiz));
+ setapex(newtet, apex(*horiz));
+ setoppo(newtet, inspoint);
+ // Make the connection of two tets.
+ bond(newtet, *horiz);
+ // 'horiz' becomes interior face.
+ enqueueflipface(*horiz, flipqueue);
+ // Add the three sides of 'newtet' to 'hulllink'.
+ fnext(newtet, hullface);
+ hulllink->add(&hullface);
+ enextfnext(newtet, hullface);
+ hulllink->add(&hullface);
+ enext2fnext(newtet, hullface);
+ hulllink->add(&hullface);
+ if (b->verbose > 3) {
+ printf(" Creating newtet ");
+ printtet(&newtet);
+ }
+ // Hull face number decreased caused by face bond() operation.
+ hullsize--;
+
+ // Loop untill 'hulllink' is empty. Find other visible convex hull faces,
+ // create tetrahedra from them and 'inspoint'. Update 'hulllink'.
+ while (hulllink->len() > 0) {
+ // Remove the top hull face from the link, its apex is 'inspoint'.
+ hullface = * (triface *) hulllink->del(1);
+ // Get the neighbor convex hull face at the edge of 'hullface'. This is
+ // done by rotating faces around the edge from the inside until reach
+ // outer space (The rotation of faces should always terminate).
+ esym(hullface, oldhull);
+ while (fnextself(oldhull)) ;
+ // Is 'inspoint' visible from 'oldhull'?
+ if (orient3d(org(oldhull), dest(oldhull), apex(oldhull), inspoint) < 0.0) {
+ // 'oldhull' is visible from 'inspoint'. Create a new tetrahedron
+ // from them.
+ maketetrahedron(&newtet);
+ setorg(newtet, org(oldhull));
+ setdest(newtet, dest(oldhull));
+ setapex(newtet, apex(oldhull));
+ setoppo(newtet, inspoint);
+ // Bond 'newtet' to 'oldhull'.
+ bond(newtet, oldhull);
+ // Hull face number decrease caused by bond().
+ hullsize--;
+ // Bond 'newtet' to 'hullface'.
+ fnext(newtet, newhull);
+ bond(newhull, hullface);
+ // 'oldhull' becomes interior face.
+ enqueueflipface(oldhull, flipqueue);
+ // Check other two sides of 'newtet'. If one exists in 'hulllink'.
+ // remove the one in 'hulllink' (it is finished), otherwise, it
+ // becomes a new hull face, add it into 'hulllink'.
+ for (i = 0; i < 2; i++) {
+ // Get 'newhull' and set flags for its vertices.
+ if (i == 0) {
+ enextfnext(newtet, newhull);
+ } else {
+ enext2fnext(newtet, newhull);
+ }
+ workpt[0] = org(newhull);
+ workpt[1] = dest(newhull);
+ workpt[2] = apex(newhull);
+ for (k = 0; k < 3; k++) {
+ idx = pointmark(workpt[k]) - in->firstnumber;
+ worklist[idx] = 1;
+ }
+ // Search 'newhull' in 'hulllink'.
+ finished = false;
+ for (j = 0; j < hulllink->len() && !finished; j++) {
+ hullface = * (triface *) hulllink->getnitem(j + 1);
+ workpt[0] = org(hullface);
+ workpt[1] = dest(hullface);
+ workpt[2] = apex(hullface);
+ share = 0;
+ for (k = 0; k < 3; k++) {
+ idx = pointmark(workpt[k]) - in->firstnumber;
+ if (worklist[idx] == 1) {
+ share++;
+ }
+ }
+ if (share == 3) {
+ // Two faces are identical. Bond them togther.
+ bond(newhull, hullface);
+ // Remove 'hullface' from the link.
+ hulllink->del(j + 1);
+ finished = true;
+ }
+ }
+ if (!finished) {
+ // 'newhull' becomes a hull face, add it into 'hulllink'.
+ hulllink->add(&newhull);
+ }
+ // Clear used flags.
+ workpt[0] = org(newhull);
+ workpt[1] = dest(newhull);
+ workpt[2] = apex(newhull);
+ for (k = 0; k < 3; k++) {
+ idx = pointmark(workpt[k]) - in->firstnumber;
+ worklist[idx] = 0;
+ }
+ }
+ } else {
+ // 'hullface' becomes a convex hull face.
+ hullsize++;
+ // Let 'dummytet[0]' points to it for next point location.
+ dummytet[0] = encode(hullface);
+ }
+ }
+
+ if (myhulllink != (link *) NULL) {
+ delete myhulllink;
+ }
+ if (myworklist != (int *) NULL) {
+ delete [] myworklist;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// collectcavtets() Collect all tets whose circumsphere contain newpoint. //
+// //
+// 'cavtetlist' returns the list of tetrahedra. On input, it contains one //
+// tetrahedron which contains 'newpoint'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::collectcavtets(point newpoint, list* cavtetlist)
+{
+ triface starttet, neightet;
+ REAL sign;
+ int i;
+
+ // Now starttet contains newpoint.
+ starttet = * (triface *)(* cavtetlist)[0];
+ infect(starttet);
+
+ // Find the other tetrahedra by looping in list.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ starttet = * (triface *)(* cavtetlist)[i];
+ // Check the four neighbors of starttet.
+ for (starttet.loc = 0; starttet.loc < 4; starttet.loc++) {
+ sym(starttet, neightet);
+ if ((neightet.tet != dummytet) && !infected(neightet)) {
+ // For positive orientation that insphere() test requires.
+ adjustedgering(neightet, CW);
+ sign = insphere(org(neightet), dest(neightet), apex(neightet),
+ oppo(neightet), newpoint);
+ if (sign >= 0.0) {
+ // Add neightet into list.
+ infect(neightet);
+ cavtetlist->append(&neightet);
+ }
+ }
+ }
+ }
+
+ // Having find all tetrahedra, uninfect them before return.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ starttet = * (triface *)(* cavtetlist)[i];
+ assert(infected(starttet));
+ uninfect(starttet);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// collectcavsubs() Collect subfaces whose circumsphere contain newpoint. //
+// //
+// 'cavsublist' returns the list of subfaces. It is not empty on input, it //
+// contains at least one such subface. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::collectcavsubs(point newpoint, list* cavsublist)
+{
+ face startsub, neighsub;
+ face checkseg;
+ point pa, pb, pc, liftpt;
+ REAL sign, ori;
+ int i, j;
+
+ // First infect subfaces in 'cavsublist'.
+ for (i = 0; i < cavsublist->len(); i++) {
+ startsub = * (face *)(* cavsublist)[i];
+ if (i == 0) {
+ liftpt = getliftpoint(shellmark(startsub));
+ }
+ sinfect(startsub);
+ }
+
+ // Find the other subfaces by looping in list.
+ for (i = 0; i < cavsublist->len(); i++) {
+ startsub = * (face *)(* cavsublist)[i];
+ for (j = 0; j < 3; j++) {
+ sspivot(startsub, checkseg);
+ if (checkseg.sh == dummysh) {
+ spivot(startsub, neighsub);
+ if (!sinfected(neighsub)) {
+ pa = sorg(neighsub);
+ pb = sdest(neighsub);
+ pc = sapex(neighsub);
+ sign = insphere(pa, pb, pc, liftpt, newpoint);
+ ori = orient3d(pa, pb, pc, liftpt);
+ if (sign != 0.0) {
+ // Correct the sign.
+ assert(ori != 0.0);
+ sign = ori > 0.0 ? sign : -sign;
+ }
+ if (sign > 0.0) {
+ // neighsub is encroached by newpoint.
+ sinfect(neighsub);
+ cavsublist->append(&neighsub);
+ }
+ }
+ }
+ senextself(startsub);
+ }
+ }
+
+ // Having find all subfaces, uninfect them before return.
+ for (i = 0; i < cavsublist->len(); i++) {
+ startsub = * (face *)(* cavsublist)[i];
+ suninfect(startsub);
+ }
+}
+
+//
+// End of mesh transformation routines
+//
+
+//
+// Begin of incremental flip Delaunay triangulation routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// incrflipinit() Create an initial tetrahedralization. //
+// //
+// The initial tetrahedralization only contains one tetrahedron formed from //
+// four affinely linear independent vertices from the input point set. //
+// //
+// 'insertqueue' returns the rest of vertices of the input point set. These //
+// vertices will be inserted one by one in the later step. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::incrflipinit(queue* insertqueue)
+{
+ triface newtet;
+ point *plist, pointloop;
+ point pa, pb, pc, pd;
+ REAL det;
+ int count;
+ int i, j;
+
+ if (b->verbose > 1) {
+ printf(" Constructing an initial tetrahedron.\n");
+ }
+
+ // Create a point list and initialize it.
+ plist = new point[in->numberofpoints];
+ i = 0;
+ points->traversalinit();
+ pointloop = pointtraverse();
+ while (pointloop != (point) NULL) {
+ plist[i++] = pointloop;
+ pointloop = pointtraverse();
+ }
+ assert(i == in->numberofpoints);
+
+ if (b->dopermute) {
+ // Do permutation. Initialize the random seed.
+ randomseed = b->srandseed;
+ for (i = 0; i < in->numberofpoints; i++) {
+ // Get a index j (from 0 to in->numberofpoints - i - 1).
+ j = (int) randomnation(in->numberofpoints - i);
+ // Exchange the i-th point and (j + i)-th point.
+ pointloop = plist[j + i];
+ plist[j + i] = plist[i];
+ plist[i] = pointloop;
+ }
+ }
+
+ // Set the plist into insertqueue.
+ if (!insertqueue->empty()) {
+ insertqueue->clear();
+ }
+ for (i = 0; i < in->numberofpoints; i++) {
+ pointloop = plist[i];
+ insertqueue->push(&pointloop);
+ }
+ delete [] plist;
+
+ // Get the first two point 'pa'.
+ pa = * (point *) insertqueue->pop();
+
+ // Get the second point 'pb', which is not identical with 'pa'.
+ count = 0;
+ pb = * (point *) insertqueue->pop();
+ while ((pb != (point) NULL) && (count < in->numberofpoints)) {
+ if ((pb[0] == pa[0]) && (pb[1] == pa[1]) && (pb[2] == pa[2])) {
+ // 'pb' is identical to 'pa', skip it.
+ insertqueue->push(&pb);
+ } else {
+ break;
+ }
+ pb = * (point *) insertqueue->pop();
+ count++;
+ }
+ if (pb == (point) NULL) {
+ printf("\nAll points are identical, no triangulation be constructed.\n");
+ exit(1);
+ }
+
+ // Get the third point 'pc', which is not collinear with 'pa' and 'pb'.
+ count = 0;
+ pc = * (point *) insertqueue->pop();
+ while ((pc != (point) NULL) && (count < in->numberofpoints)) {
+ if (iscollinear(pa, pb, pc, (b->epsilon * 1e-2))) {
+ // They are collinear or identical, put it back to queue.
+ insertqueue->push(&pc);
+ } else {
+ break;
+ }
+ pc = * (point *) insertqueue->pop();
+ count++;
+ }
+ if (pc == (point) NULL) {
+ printf("\nAll points are collinear, no triangulation be constructed.\n");
+ exit(1);
+ }
+
+ // Get the fourth point which is not coplanar with pa, pb, and pc.
+ count = 0;
+ pd = * (point *) insertqueue->pop();
+ while ((pd != (point) NULL) && (count < in->numberofpoints)) {
+ det = orient3d(pa, pb, pc, pd);
+ if (det == 0.0) {
+ // They are coplanar or identical, put it back to queue.
+ insertqueue->push(&pd);
+ } else {
+ break;
+ }
+ pd = * (point *) insertqueue->pop();
+ count++;
+ }
+ if (pd == (point) NULL) {
+ printf("\nAll points are coplanar, no triangulation be constructed.\n");
+ exit(1);
+ }
+ if (det > 0.0) {
+ pointloop = pa; pa = pb; pb = pointloop;
+ }
+
+ // Create the tetrahedron with corners pa, pb, pc and pd.
+ maketetrahedron(&newtet);
+ setorg(newtet, pa);
+ setdest(newtet, pb);
+ setapex(newtet, pc);
+ setoppo(newtet, pd);
+ // Set the vertices be FREEVOLVERTEX to indicate they belong to the mesh.
+ setpointtype(pa, FREEVOLVERTEX);
+ setpointtype(pb, FREEVOLVERTEX);
+ setpointtype(pc, FREEVOLVERTEX);
+ setpointtype(pd, FREEVOLVERTEX);
+ // Bond to 'dummytet' for point location.
+ dummytet[0] = encode(newtet);
+ if (b->verbose > 3) {
+ printf(" Creating tetra ");
+ printtet(&newtet);
+ }
+ // At init, all faces of this tet are hull faces.
+ hullsize = 4;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// mergepoints() Merge two very close points to be one point. //
+// //
+// This function is used for dealing with inputs from CAD tools. It uses the //
+// (relative) epsilon to determine whether two points are merged or not. The //
+// default epsilon is (b->epsilon * 1e+2 = 1e-6). You can set the value thr- //
+// ough the -T switch, e.g. -T1e-5. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+mergepoints(point testpt, triface* starttet, link* hulllink, int* worklist)
+{
+ triface hullface, neihull, checkhull;
+ point workpt[4], checkpt;
+ enum locateresult loc;
+ REAL ori, dist, epspp;
+ bool merged;
+ int share;
+ int i, j, k;
+
+ // First locate the point in DT.
+ loc = locate(testpt, starttet);
+ if (loc == ONVERTEX) return; // They are merged.
+
+ // Now testpt is either outside or insde.
+ merged = false;
+ if (loc == OUTSIDE) {
+ // Outside, collect hullfaces which are visible by testpt.
+ hulllink->add(starttet);
+ for (i = 0; i < hulllink->len(); i++) {
+ hullface = * (triface *) hulllink->getnitem(i + 1);
+ // Check if hullface has a point close to testpt.
+ workpt[0] = org(hullface);
+ workpt[1] = dest(hullface);
+ workpt[2] = apex(hullface);
+ workpt[3] = oppo(hullface);
+ for (j = 0; j < 4; j++) {
+ dist = distance(testpt, workpt[j]);
+ epspp = dist / longest;
+ if (epspp <= (b->epsilon * 1e+2)) {
+ // Merge the point to the existing point.
+ for (k = 0; k < 3; k++) testpt[k] = workpt[j][k];
+ merged = true;
+ break;
+ }
+ }
+ if (merged) break;
+ // Check the neighbor visible hullfaces by testpt.
+ adjustedgering(hullface, CCW);
+ for (j = 0; j < 3; j++) {
+ neihull = hullface;
+ while (fnextself(neihull)) ;
+ workpt[0] = org(neihull);
+ workpt[1] = dest(neihull);
+ workpt[2] = apex(neihull);
+ ori = orient3d(workpt[0], workpt[1], workpt[2], testpt);
+ if (ori < 0.0) {
+ // Visible. Add neihull to link if it doesn't exist in it.
+ for (k = 0; k < 3; k++) worklist[pointmark(workpt[k])] = 1;
+ // Do a brute-force search.
+ for (k = 0; k < hulllink->len(); k++) {
+ if (k == i) continue;
+ checkhull = * (triface *) hulllink->getnitem(k + 1);
+ checkpt = org(checkhull);
+ share = worklist[pointmark(checkpt)];
+ checkpt = dest(checkhull);
+ share += worklist[pointmark(checkpt)];
+ checkpt = apex(checkhull);
+ share += worklist[pointmark(checkpt)];
+ if (share == 3) break;
+ }
+ if (k >= hulllink->len()) {
+ hulllink->add(&neihull);
+ }
+ for (k = 0; k < 3; k++) worklist[pointmark(workpt[k])] = 0;
+ } else {
+ // Check the apex anyway.
+ dist = distance(testpt, workpt[2]);
+ epspp = dist / longest;
+ if (epspp <= (b->epsilon * 1e+2)) {
+ // Merge the point to the existing point.
+ for (k = 0; k < 3; k++) testpt[k] = workpt[2][k];
+ merged = true;
+ break;
+ }
+ // Check the opposite anyway.
+ workpt[3] = oppo(neihull);
+ dist = distance(testpt, workpt[3]);
+ epspp = dist / longest;
+ if (epspp <= (b->epsilon * 1e+2)) {
+ // Merge the point to the existing point.
+ for (k = 0; k < 3; k++) testpt[k] = workpt[3][k];
+ merged = true;
+ break;
+ }
+ }
+ enextself(hullface);
+ }
+ if (merged) break;
+ }
+ } else {
+ hullface = *starttet;
+ // Check if there is a close point?
+ for (j = 0; j < 4 && !merged; j++) {
+ checkpt = (point) hullface.tet[4 + j];
+ dist = distance(testpt, checkpt);
+ epspp = dist / longest;
+ if (epspp <= (b->epsilon * 1e+2)) {
+ // Merge the point to the existing point.
+ for (k = 0; k < 3; k++) testpt[k] = checkpt[k];
+ merged = true;
+ }
+ }
+ }
+ // Clear hulllink for the next use.
+ hulllink->clear();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// incrflipdelaunay() Construct a delaunay tetrahedrization from a set of //
+// 3D points using the incremental flip algorithm. //
+// //
+// The incremental flip algorithm is described in the paper of Edelsbrunner //
+// and Shah, "Incremental Topological Flipping Works for Regular Triangulat- //
+// ions", Algorithmica 15: 223-241, 1996. It can be described as follows: //
+// //
+// S be a set of points in 3D, Let 4 <= i <= n and assume that the //
+// Delaunay triangulation of the first i-1 points in S is already //
+// constructed; call it D(i-1). Add the i-th point p_i (belong to S) to //
+// the triangulation,and restore Delaunayhood by flipping; this result //
+// in D(i). Repeat this procedure until i = n. //
+// //
+// This strategy always leads to the Ddelaunay triangulation of a point set. //
+// The return value is the number of convex hull faces of this point set. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+long tetgenmesh::incrflipdelaunay()
+{
+ triface starttet;
+ point pointloop;
+ queue *flipqueue;
+ queue *insertqueue;
+ link *hulllink;
+ enum insertsiteresult insres;
+ int *worklist, i;
+
+ if (!b->quiet) {
+ if (!b->noflip) {
+ printf("Constructing Delaunay tetrahedrization.\n");
+ } else {
+ printf("Constructing tetrahedrization.\n");
+ }
+ }
+
+ // Initialize subsidary queues, link, list, ...
+ flipqueue = new queue(sizeof(badface));
+ insertqueue = new queue(sizeof(point*), in->numberofpoints);
+ hulllink = new link(sizeof(triface), NULL, 256);
+ worklist = new int[in->numberofpoints + 1];
+ for (i = 0; i < in->numberofpoints + 1; i++) worklist[i] = 0;
+ flip23s = flip32s = flip22s = flip44s = 0;
+
+ // Algorithm starts from here.
+
+ // Construct an initial tetrahedralization and fill 'insertqueue'.
+ incrflipinit(insertqueue);
+
+ // Loop untill all points are inserted.
+ while (!insertqueue->empty()) {
+ pointloop = * (point *) insertqueue->pop();
+ // It will become a mesh point unless it duplicates an existing point.
+ setpointtype(pointloop, FREEVOLVERTEX);
+ // Try to insert the point first.
+ starttet.tet = (tetrahedron *) NULL;
+
+ // For STL, PLY, and OFF inputs. Merge very close points.
+ if (b->detectinter || (b->object == tetgenbehavior::STL) ||
+ (b->object == tetgenbehavior::PLY) ||
+ (b->object == tetgenbehavior::OFF) ||
+ (b->object == tetgenbehavior::MEDIT)) {
+ mergepoints(pointloop, &starttet, hulllink, worklist);
+ }
+
+ insres = insertsite(pointloop, &starttet, false, flipqueue);
+ if (insres == OUTSIDEPOINT) {
+ // Point locates outside the convex hull.
+ inserthullsite(pointloop, &starttet, flipqueue, hulllink, worklist);
+ } else if (insres == DUPLICATEPOINT) {
+ if (b->object != tetgenbehavior::STL) {
+ if (!b->quiet) {
+ printf("Warning: Point %d is identical with point %d.\n",
+ pointmark(pointloop), pointmark(org(starttet)));
+ }
+ // Count the number of duplicated points.
+ dupverts++;
+ }
+ // Remember it is a duplicated point.
+ setpointtype(pointloop, DUPLICATEDVERTEX);
+ if (b->plc || b->refine) {
+ // Set a pointer to the point it duplicates.
+ setpoint2pt(pointloop, org(starttet));
+ }
+ }
+ if (!b->noflip) {
+ // Call flip algorithm to recover Delaunayness.
+ flip(flipqueue, NULL, false, false, false);
+ } else {
+ // Not perform flip.
+ flipqueue->clear();
+ }
+ }
+
+ if (!b->noflip && b->verbose) {
+ printf(" Total flips: %ld, where T23 %ld, T32 %ld, T22 %ld, T44 %ld\n",
+ flip23s + flip32s + flip22s + flip44s,
+ flip23s, flip32s, flip22s, flip44s);
+ }
+
+ delete flipqueue;
+ delete insertqueue;
+ delete hulllink;
+ delete [] worklist;
+
+ return hullsize;
+}
+
+//
+// End of incremental flip Delaunay triangulation routines
+//
+
+//
+// Begin of surface triangulation routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The lift points //
+// //
+// A 'lifting point' of a facet is a point which lies exactly non-coplanar //
+// with the plane containing that facet. With such an additional point, the //
+// three-dimensional geometric predicates (orient3d, insphere) can be used //
+// to substitute the lower dimensional predicates (orient2d, incircle). The //
+// advantage is there is no need to project 3D points back into 2D, so the //
+// rounding error can be avoid. //
+// //
+// These points are calculated during the initialization of triangulating //
+// the facets. It is important to orient subfaces of the same facet to have //
+// the same orientation with respect to its lift point. This way guarantees //
+// the test results are consistent. We take the convention that the lift //
+// point of a facet always lies above the CCW edge rings of subfaces of the //
+// same facet. By this convention, given three points a, b, and c in a facet,//
+// we say c has the counterclockwise order with ab is corresponding to say //
+// that c is below the plane abp, where p is the lift point. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// locatesub() Find a point in the surface mesh. //
+// //
+// Searching begins from the input 'searchsh', it should be a handle on the //
+// convex hull of the facet triangulation. //
+// //
+// If 'stopatseg' is nonzero, the search will stop if it tries to walk //
+// through a subsegment, and will return OUTSIDE. //
+// //
+// On completion, 'searchsh' is a subface that contains 'searchpt'. //
+// - Returns ONVERTEX if the point lies on an existing vertex. 'searchsh' //
+// is a handle whose origin is the existing vertex. //
+// - Returns ONEDGE if the point lies on a mesh edge. 'searchsh' is a //
+// handle whose primary edge is the edge on which the point lies. //
+// - Returns ONFACE if the point lies strictly within a subface. //
+// 'searchsh' is a handle on which the point lies. //
+// - Returns OUTSIDE if the point lies outside the triangulation. //
+// //
+// WARNING: This routine is designed for convex triangulations, and will not //
+// not generally work after the holes and concavities have been carved. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+locatesub(point searchpt, face* searchsh, int stopatseg)
+{
+ face backtracksh, spinsh, checkedge;
+ point forg, fdest, fapex, liftpoint;
+ REAL abovept[3], norm[3], nlen;
+ REAL orgori, destori, ori;
+ int moveleft, i;
+
+ if (searchsh->sh == dummysh) {
+ searchsh->shver = 0;
+ spivotself(*searchsh);
+ assert(searchsh->sh != dummysh);
+ }
+
+ // Set the liftpoint.
+ adjustedgering(*searchsh, CCW);
+ forg = sorg(*searchsh);
+ fdest = sdest(*searchsh);
+ fapex = sapex(*searchsh);
+ if (liftpointarray != (REAL *) NULL) {
+ // The liftpoint already exits.
+ liftpoint = getliftpoint(shellmark(*searchsh));
+ } else {
+ // Calculate the liftpoint from the normal direction of searchsh.
+ facenormal(forg, fdest, fapex, norm, &nlen);
+ assert(nlen > 0.0);
+ for (i = 0; i < 3; i++) norm[i] /= nlen;
+ nlen = distance(forg, fdest);
+ for (i = 0; i < 3; i++) abovept[i] = forg[i] + nlen * norm[i];
+ liftpoint = abovept;
+ }
+ // Adjust the liftpoint be above the face.
+ orgori = orient3d(forg, fdest, fapex, liftpoint);
+ assert(orgori != 0.0);
+ if (orgori > 0.0) {
+ sesymself(*searchsh);
+ }
+
+ // Orient 'searchsh' so that 'searchpt' is below it (i.e., searchpt has
+ // CCW orientation with respect to searchsh in plane). Such edge
+ // should always exist. Save it as (forg, fdest).
+ for (i = 0; i < 3; i++) {
+ forg = sorg(*searchsh);
+ fdest = sdest(*searchsh);
+ if (orient3d(forg, fdest, liftpoint, searchpt) > 0.0) break;
+ senextself(*searchsh);
+ }
+ assert(i < 3);
+
+ while (1) {
+ fapex = sapex(*searchsh);
+ // Check whether the apex is the point we seek.
+ if (fapex[0] == searchpt[0] && fapex[1] == searchpt[1] &&
+ fapex[2] == searchpt[2]) {
+ senext2self(*searchsh);
+ return ONVERTEX;
+ }
+ // Does the point lie on the other side of the line defined by the
+ // triangle edge opposite the triangle's destination?
+ destori = orient3d(forg, fapex, liftpoint, searchpt);
+ // Does the point lie on the other side of the line defined by the
+ // triangle edge opposite the triangle's origin?
+ orgori = orient3d(fapex, fdest, liftpoint, searchpt);
+ if (destori > 0.0) {
+ moveleft = 1;
+ } else {
+ if (orgori > 0.0) {
+ moveleft = 0;
+ } else {
+ // The point must be on the boundary of or inside this triangle.
+ if (destori == 0.0) {
+ senext2self(*searchsh);
+ return ONEDGE;
+ }
+ if (orgori == 0.0) {
+ senextself(*searchsh);
+ return ONEDGE;
+ }
+ return ONFACE;
+ }
+ }
+ // Move to another triangle. Leave a trace `backtracksh' in case
+ // walking off a boundary of the triangulation.
+ if (moveleft) {
+ senext2(*searchsh, backtracksh);
+ fdest = fapex;
+ } else {
+ senext(*searchsh, backtracksh);
+ forg = fapex;
+ }
+ // Check if we meet a segment.
+ sspivot(backtracksh, checkedge);
+ if (checkedge.sh != dummysh) {
+ if (stopatseg) {
+ // The flag indicates we should not cross a segment. Stop.
+ *searchsh = backtracksh;
+ return OUTSIDE;
+ }
+ // Try to walk through a segment. We need to find a coplanar subface
+ // sharing this segment to get into.
+ spinsh = backtracksh;
+ do {
+ spivotself(spinsh);
+ if (spinsh.sh == backtracksh.sh) {
+ // Turn back, no coplanar subface is found.
+ break;
+ }
+ // Are they belong to the same facet.
+ if (shellmark(spinsh) == shellmark(backtracksh)) {
+ // Find a coplanar subface. Walk into it.
+ *searchsh = spinsh;
+ break;
+ }
+ // Are they (nearly) coplanar?
+ ori = orient3d(forg, fdest, sapex(backtracksh), sapex(spinsh));
+ if (iscoplanar(forg, fdest, sapex(backtracksh), sapex(spinsh), ori,
+ b->epsilon)) {
+ // Find a coplanar subface. Walk into it.
+ *searchsh = spinsh;
+ break;
+ }
+ } while (spinsh.sh != backtracksh.sh);
+ } else {
+ spivot(backtracksh, *searchsh);
+ }
+ // Check for walking right out of the triangulation.
+ if ((searchsh->sh == dummysh) || (searchsh->sh == backtracksh.sh)) {
+ // Go back to the last triangle.
+ *searchsh = backtracksh;
+ return OUTSIDE;
+ }
+ // To keep the same orientation wrt. liftpoint.
+ // adjustedgering(*searchsh, CCW);
+ if (sorg(*searchsh) != forg) {
+ sesymself(*searchsh);
+ }
+ assert((sorg(*searchsh) == forg) && (sdest(*searchsh) == fdest));
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// adjustlocatesub() Adjust the precise location of a vertex. //
+// //
+// 'precise' is the precise location (returned from locatesub()) of 'searcht'//
+// with respect to 'searchsh'. 'epspp' is the given relative tolerance. //
+// //
+// This routine re-evaluates the orientations of 'searchpt' with respect to //
+// the three edges of 'searchsh'. Detects the collinearities by additinal //
+// tests based on the given tolerance. If 'precise' is ONEDGE, one can save //
+// one orientation test for the current edge of 'searchsh'. //
+// //
+// On completion, 'searchsh' is a subface contains 'searchpt'. The returned //
+// value indicates one of the following cases: //
+// - Returns ONVERTEX if the point lies on an existing vertex. 'searchsh' //
+// is a handle whose origin is the existing vertex. //
+// - Returns ONEDGE if the point lies on a mesh edge. 'searchsh' is a //
+// handle whose primary edge is the edge on which the point lies. //
+// - Returns ONFACE if the point lies strictly within a subface. //
+// 'searchsh' is a handle on which the point lies. //
+// - Returns OUTSIDE if the point lies outside 'searchsh'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+adjustlocatesub(point searchpt, face* searchsh, enum locateresult precise,
+ REAL epspp)
+{
+ point pa, pb, pc;
+ bool s1, s2, s3;
+
+ pa = sorg(*searchsh);
+ pb = sdest(*searchsh);
+ pc = sapex(*searchsh);
+
+ if (precise == ONEDGE) {
+ s1 = true;
+ } else {
+ s1 = iscollinear(pa, pb, searchpt, epspp);
+ }
+ s2 = iscollinear(pb, pc, searchpt, epspp);
+ s3 = iscollinear(pc, pa, searchpt, epspp);
+ if (s1) {
+ if (s2) {
+ // on vertex pb.
+ assert(!s3);
+ senextself(*searchsh);
+ return ONVERTEX;
+ } else if (s3) {
+ // on vertex pa.
+ return ONVERTEX;
+ } else {
+ // on edge pa->pb.
+ return ONEDGE;
+ }
+ } else if (s2) {
+ if (s3) {
+ // on vertex pc.
+ senext2self(*searchsh);
+ return ONVERTEX;
+ } else {
+ // on edge pb->pc.
+ senextself(*searchsh);
+ return ONEDGE;
+ }
+ } else if (s3) {
+ // on edge pc->pa.
+ senext2self(*searchsh);
+ return ONEDGE;
+ } else {
+ return precise;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// flipsub() Flip all non-Delaunay edges in a given queue of subfaces. //
+// //
+// Assumpation: Current triangulation is non-Delaunay after inserting a //
+// point or performing a flip operation, all possibly non-Delaunay edges are //
+// in 'facequeue'. The return value is the total number of flips done during //
+// this invocation. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+long tetgenmesh::flipsub(queue* flipqueue)
+{
+ badface *qedge;
+ face flipedge, symedge, bdedge;
+ point pa, pb, pc, pd;
+ REAL liftpt[3], n[3], nlen;
+ REAL sign, ll, d1, d2;
+ int edgeflips, i;
+
+ if (b->verbose > 1) {
+ printf(" Start do edge queue: %ld edges.\n", flipqueue->len());
+ }
+
+ edgeflips = 0;
+
+ while ((qedge = (badface *) flipqueue->pop()) != NULL) {
+ flipedge = qedge->ss;
+ if (flipedge.sh == dummysh) continue;
+ if ((sorg(flipedge) != qedge->forg) ||
+ (sdest(flipedge) != qedge->fdest)) continue;
+ sspivot(flipedge, bdedge);
+ if (bdedge.sh != dummysh) continue; // Can't flip a subsegment.
+ spivot(flipedge, symedge);
+ if (symedge.sh == dummysh) continue; // Can't flip a hull edge.
+ pa = sorg(flipedge);
+ pb = sdest(flipedge);
+ pc = sapex(flipedge);
+ pd = sapex(symedge);
+ // liftpoint = getliftpoint(shellmark(flipedge));
+ // If abc is nearly collinear, orient3d() test may return wrong value.
+ // Choose abc or abd when it has the bigger area than the other.
+ d1 = shortdistance(pc, pa, pb);
+ d2 = shortdistance(pd, pa, pb);
+ ll = distance(pa, pb);
+ if (d1 > d2) {
+ // Use abc as the base.
+ facenormal(pa, pb, pc, n, &nlen);
+ for (i = 0; i < 3; i++) n[i] /= nlen;
+ for (i = 0; i < 3; i++) liftpt[i] = pa[i] + ll * n[i];
+ // liftpt is above abc;
+ sign = insphere(pb, pa, pc, liftpt, pd);
+ } else {
+ // Use abd as the base.
+ facenormal(pa, pb, pd, n, &nlen);
+ for (i = 0; i < 3; i++) n[i] /= nlen;
+ for (i = 0; i < 3; i++) liftpt[i] = pa[i] + ll * n[i];
+ // liftpt is above abd;
+ sign = insphere(pb, pa, pd, liftpt, pc);
+ }
+ if (sign > 0.0) {
+ // Flip the non-Delaunay edge.
+ flip22sub(&flipedge, flipqueue);
+ edgeflips++;
+ }
+ }
+
+ if (b->verbose > 1) {
+ printf(" Total %d flips.\n", edgeflips);
+ }
+
+ return edgeflips;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// incrflipinitsub() Create a initial triangulation. //
+// //
+// The initial triangulation only consists of one triangle formed by three //
+// non-collinear points. 'facetidx' is the index of the facet in 'facetlist' //
+// (starts from 1) of the tetgenio structure; 'ptlist' is a list of indices //
+// of the facet vertices; 'idx2verlist' is a map from indices to vertices. //
+// //
+// The 'lift point' of this facet is calculated. If not all vertices of the //
+// facet are collinear, such point is found by lifting the centroid of the //
+// set of vertices for a certain distance along the normal of this facet. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+incrflipinitsub(int facetidx, list* ptlist, point* idx2verlist)
+{
+ face newsh;
+ point pt1, pt2, pt3;
+ point liftpoint, ptloop;
+ pbcdata *pd;
+ REAL cent[3], norm[3];
+ REAL v1[3], v2[3];
+ REAL smallcos, cosa;
+ REAL liftdist, len, vol;
+ int idx, smallidx;
+ int i, j;
+
+ if (ptlist->len() > 3) {
+ // Find a (non-degenerate) vector from the vertex set.
+ idx = * (int *) (* ptlist)[0];
+ pt1 = idx2verlist[idx - in->firstnumber];
+ len = 0.0;
+ // Loop the set of vertices until a not too small edge be found.
+ for (i = 1; i < ptlist->len(); i++) {
+ idx = * (int *) (* ptlist)[i];
+ pt2 = idx2verlist[idx - in->firstnumber];
+ v1[0] = pt2[0] - pt1[0];
+ v1[1] = pt2[1] - pt1[1];
+ v1[2] = pt2[2] - pt1[2];
+ len = sqrt(dot(v1, v1));
+ if ((len / longest) > (b->epsilon * 1e+2)) break;
+ }
+ // Remember this size as lift distance.
+ liftdist = len;
+ // 'v1' is a reasonable vector, normalize it.
+ for (i = 0; i < 3; i++) v1[i] /= len;
+ // Continue to find another (non-degenerate) vector, which forms an
+ // angle with v1 most close to 90 degree.
+ smallcos = 1.0; // The cosine value of 0 degree.
+ for (i = 1; i < ptlist->len(); i++) {
+ idx = * (int *) (* ptlist)[i];
+ pt3 = idx2verlist[idx - in->firstnumber];
+ if (pt3 == pt2) continue; // Skip the same point.
+ v2[0] = pt3[0] - pt1[0];
+ v2[1] = pt3[1] - pt1[1];
+ v2[2] = pt3[2] - pt1[2];
+ len = sqrt(dot(v2, v2));
+ if (len > 0.0) { // v2 is not too small.
+ cosa = fabs(dot(v1, v2)) / len;
+ if (cosa < smallcos) {
+ smallidx = idx;
+ smallcos = cosa;
+ }
+ } else { // len == 0.0, two identical points defined in a facet.
+ printf("Warning: Facet %d has two identical vertices: %d, %d.\n",
+ facetidx, pointmark(pt1), pointmark(pt3));
+ return false; // Invalid polygon, do not procced.
+ }
+ }
+ if (smallcos == 1.0) {
+ // The input set of vertices is not a good set (or nearly degenerate).
+ printf("Warning: Facet %d with vertices: ", facetidx);
+ for (i = 0; i < 3; i++) {
+ idx = * (int *) (* ptlist)[i];
+ ptloop = idx2verlist[idx - in->firstnumber];
+ printf("%d ", pointmark(ptloop));
+ }
+ printf("... is degenerate.\n");
+ return false; // Invalid polygon, do not procced.
+ }
+ // Get the right point to form v2.
+ pt3 = idx2verlist[smallidx - in->firstnumber];
+ assert(pt3 != pt2);
+ v2[0] = pt3[0] - pt1[0];
+ v2[1] = pt3[1] - pt1[1];
+ v2[2] = pt3[2] - pt1[2];
+ len = sqrt(dot(v2, v2));
+ assert(len > 0.0);
+ // Remember this size as lift distance.
+ liftdist = (liftdist > len ? liftdist : len);
+ // 'v2' is a reasonable vector, normalize it.
+ for (i = 0; i < 3; i++) v2[i] /= len;
+ } else {
+ // There are only three vertices of this facet (a triangle).
+ idx = * (int *) (* ptlist)[0];
+ pt1 = idx2verlist[idx - in->firstnumber];
+ idx = * (int *) (* ptlist)[1];
+ pt2 = idx2verlist[idx - in->firstnumber];
+ idx = * (int *) (* ptlist)[2];
+ pt3 = idx2verlist[idx - in->firstnumber];
+ v1[0] = pt2[0] - pt1[0];
+ v1[1] = pt2[1] - pt1[1];
+ v1[2] = pt2[2] - pt1[2];
+ len = sqrt(dot(v1, v1));
+ if (len == 0.0) {
+ printf("Warning: Facet %d has two identical vertices: %d, %d.\n",
+ facetidx, pointmark(pt1), pointmark(pt2));
+ return false; // Invalid polygon, do not procced.
+ }
+ // Remember this size as lift distance.
+ liftdist = len;
+ // 'v1' is a reasonable vector, normalize it.
+ for (i = 0; i < 3; i++) v1[i] /= len;
+ v2[0] = pt3[0] - pt1[0];
+ v2[1] = pt3[1] - pt1[1];
+ v2[2] = pt3[2] - pt1[2];
+ len = sqrt(dot(v2, v2));
+ if (len == 0.0) {
+ printf("Warning: Facet %d has two identical vertices: %d, %d.\n",
+ facetidx, pointmark(pt1), pointmark(pt3));
+ return false; // Invalid polygon, do not procced.
+ }
+ // Remember this size as lift distance.
+ liftdist = (liftdist > len ? liftdist : len);
+ // 'v2' is a reasonable vector, normalize it.
+ for (i = 0; i < 3; i++) v2[i] /= len;
+ }
+ // Calculate the unit normal of this facet.
+ cross(v1, v2, norm);
+
+ // Calculate the centroid point of the vertex set. At the same time, check
+ // whether vertices of this facet are roughly coplanar or not.
+ cent[0] = cent[1] = cent[2] = 0.0;
+ for (i = 0; i < ptlist->len(); i++) {
+ idx = * (int *) (* ptlist)[i];
+ ptloop = idx2verlist[idx - in->firstnumber];
+ if (ptlist->len() > 3) {
+ vol = orient3d(pt1, pt2, pt3, ptloop);
+ if (vol != 0.0) {
+ if (!iscoplanar(pt1, pt2, pt3, ptloop, vol, b->epsilon * 1e+3)) {
+ printf("Warning: Facet %d has a non-coplanar vertex %d.\n",
+ facetidx, pointmark(ptloop));
+ // This is not a fatal problem, we still can procced.
+ }
+ }
+ }
+ cent[0] += ptloop[0];
+ cent[1] += ptloop[1];
+ cent[2] += ptloop[2];
+ }
+ for (i = 0; i < 3; i++) cent[i] /= ptlist->len();
+ // Calculate the lifting point of the facet. It is lifted from 'cent'
+ // along the normal direction with a certain ditance.
+ liftpoint = getliftpoint(facetidx);
+ for (i = 0; i < 3; i++) {
+ liftpoint[i] = cent[i] + liftdist * norm[i];
+ }
+
+ // Create the initial triangle. The liftpoint is above (pt1, pt2, pt3).
+ makeshellface(subfaces, &newsh);
+ setsorg(newsh, pt1);
+ setsdest(newsh, pt2);
+ setsapex(newsh, pt3);
+ // Remeber the facet it belongs to.
+ setshellmark(newsh, facetidx);
+ // Set vertices be type FACETVERTEX to indicate they belong to a facet.
+ setpointtype(pt1, FACETVERTEX);
+ setpointtype(pt2, FACETVERTEX);
+ setpointtype(pt3, FACETVERTEX);
+ // Bond this subface to 'dummysh' for point location routine.
+ dummysh[0] = sencode(newsh);
+
+ // Is there pbc conditions?
+ if (checkpbcs) {
+ // Get the facet marker (saved in 'in->facetmarkerlist').
+ idx = in->facetmarkerlist[facetidx - 1];
+ for (i = 0; i < in->numberofpbcgroups; i++) {
+ pd = &subpbcgrouptable[i];
+ for (j = 0; j < 2; j++) {
+ if (pd->fmark[j] == idx) {
+ setshellpbcgroup(newsh, i);
+ pd->ss[j] = newsh;
+ }
+ }
+ }
+ }
+
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// collectvisiblesubs() Collect convex hull edges which are visible from //
+// the inserting point. Construct new subfaces from //
+// these edges and the point. //
+// //
+// 'facetidx' is the index of the facet in 'in->facetlist' (starts from 1), //
+// 'inspoint' is located outside current triangulation, 'horiz' is the hull //
+// edge it is visible. 'flipqueue' returns the visible hull edges which have //
+// become interior edges on completion of this routine. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+collectvisiblesubs(int facetidx, point inspoint, face* horiz, queue* flipqueue)
+{
+ face newsh, hullsh;
+ face rightsh, leftsh, spinedge;
+ point horg, hdest, liftpoint;
+ bool aboveflag;
+
+ liftpoint = getliftpoint(facetidx);
+
+ // Create a new subface above 'horiz'.
+ adjustedgering(*horiz, CCW);
+ makeshellface(subfaces, &newsh);
+ setsorg(newsh, sdest(*horiz));
+ setsdest(newsh, sorg(*horiz));
+ setsapex(newsh, inspoint);
+ setshellmark(newsh, facetidx);
+ if (checkpbcs) {
+ setshellpbcgroup(newsh, shellpbcgroup(*horiz));
+ }
+ // Make the connection.
+ sbond(newsh, *horiz);
+ // 'horiz' becomes interior edge.
+ enqueueflipedge(*horiz, flipqueue);
+
+ // Finish the hull edges at the right side of the newsh.
+ hullsh = *horiz;
+ while (1) {
+ senext(newsh, rightsh);
+ // Get the right hull edge of 'horiz' by spinning inside edges around
+ // the origin of 'horiz' until reaching the 'dummysh'.
+ spinedge = hullsh;
+ do {
+ hullsh = spinedge;
+ senext2self(hullsh);
+ spivot(hullsh, spinedge);
+ adjustedgering(spinedge, CCW);
+ } while (spinedge.sh != dummysh);
+ // Test whether 'inspoint' is visible from 'hullsh'.
+ horg = sorg(hullsh);
+ hdest = sdest(hullsh);
+ aboveflag = orient3d(horg, hdest, liftpoint, inspoint) < 0.0;
+ if (aboveflag) {
+ // It's a visible hull edge.
+ makeshellface(subfaces, &newsh);
+ setsorg(newsh, sdest(hullsh));
+ setsdest(newsh, sorg(hullsh));
+ setsapex(newsh, inspoint);
+ setshellmark(newsh, facetidx);
+ if (checkpbcs) {
+ setshellpbcgroup(newsh, shellpbcgroup(hullsh));
+ }
+ // Make the connection.
+ sbond(newsh, hullsh);
+ senext2(newsh, leftsh);
+ sbond(leftsh, rightsh);
+ // 'horiz' becomes interior edge.
+ enqueueflipedge(hullsh, flipqueue);
+ } else {
+ // 'rightsh' is a new hull edge.
+ dummysh[0] = sencode(rightsh);
+ break;
+ }
+ }
+
+ // Finish the hull edges at the left side of the newsh.
+ hullsh = *horiz;
+ spivot(*horiz, newsh);
+ while (1) {
+ senext2(newsh, leftsh);
+ // Get the left hull edge of 'horiz' by spinning edges around the
+ // destination of 'horiz'.
+ spinedge = hullsh;
+ do {
+ hullsh = spinedge;
+ senextself(hullsh);
+ spivot(hullsh, spinedge);
+ adjustedgering(spinedge, CCW);
+ } while (spinedge.sh != dummysh);
+ // Test whether 'inspoint' is visible from 'hullsh'.
+ horg = sorg(hullsh);
+ hdest = sdest(hullsh);
+ aboveflag = orient3d(horg, hdest, liftpoint, inspoint) < 0.0;
+ if (aboveflag) {
+ // It's a visible hull edge.
+ makeshellface(subfaces, &newsh);
+ setsorg(newsh, sdest(hullsh));
+ setsdest(newsh, sorg(hullsh));
+ setsapex(newsh, inspoint);
+ setshellmark(newsh, facetidx);
+ if (checkpbcs) {
+ setshellpbcgroup(newsh, shellpbcgroup(hullsh));
+ }
+ // Make the connection.
+ sbond(newsh, hullsh);
+ senext(newsh, rightsh);
+ sbond(rightsh, leftsh);
+ // 'horiz' becomes interior edge.
+ enqueueflipedge(hullsh, flipqueue);
+ } else {
+ // 'leftsh' is a new hull edge.
+ dummysh[0] = sencode(leftsh);
+ break;
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// incrflipdelaunaysub() Create a Delaunay triangulation from a 3D point //
+// set using the incremental flip algorithm. //
+// //
+// 'facetidx' is the index of the facet in 'in->facetlist' (starts from 1), //
+// 'ptlist' is the index list of the vertices of the facet, 'idx2verlist' is //
+// a map from indices to vertices. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+incrflipdelaunaysub(int facetidx, list* ptlist, point* idx2verlist,
+ queue* flipqueue)
+{
+ face startsh;
+ point pointloop;
+ enum locateresult loc;
+ int idx, i;
+
+ for (i = 1; i < ptlist->len(); i++) {
+ idx = * (int *) (* ptlist)[i];
+ pointloop = idx2verlist[idx - in->firstnumber];
+ // Set vertices be type FACETVERTEX to indicate they belong to a facet.
+ setpointtype(pointloop, FACETVERTEX);
+ startsh.sh = dummysh;
+ loc = locatesub(pointloop, &startsh, 0);
+ if (loc == ONVERTEX) continue;
+ if (loc == ONFACE) {
+ splitsubface(pointloop, &startsh, flipqueue);
+ } else if (loc == ONEDGE) {
+ splitsubedge(pointloop, &startsh, flipqueue);
+ } else if (loc == OUTSIDE) {
+ collectvisiblesubs(facetidx, pointloop, &startsh, flipqueue);
+ }
+ flipsub(flipqueue);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// finddirectionsub() Find the first subface in a facet on the path from //
+// one point to another. //
+// //
+// Finds the subface in the facet that intersects a line segment drawn from //
+// the origin of `searchsh' to the point `tend', and returns the result in //
+// `searchsh'. The origin of `searchsh' does not change, even though the //
+// subface returned may differ from the one passed in. //
+// //
+// The return value notes whether the destination or apex of the found face //
+// is collinear with the two points in question. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::finddirectionresult tetgenmesh::
+finddirectionsub(face* searchsh, point tend)
+{
+ face checksh;
+ point startpoint, liftpoint;
+ point leftpoint, rightpoint;
+ REAL leftccw, rightccw;
+ int leftflag, rightflag;
+
+ adjustedgering(*searchsh, CCW);
+ liftpoint = getliftpoint(shellmark(*searchsh));
+ startpoint = sorg(*searchsh);
+ rightpoint = sdest(*searchsh);
+ leftpoint = sapex(*searchsh);
+ // Is `tend' to the left?
+ leftccw = orient3d(tend, startpoint, liftpoint, leftpoint);
+ leftflag = leftccw > 0.0;
+ // Is `tend' to the right?
+ rightccw = orient3d(startpoint, tend, liftpoint, rightpoint);
+ rightflag = rightccw > 0.0;
+ if (leftflag && rightflag) {
+ // `searchsh' faces directly away from `tend'. We could go left or
+ // right. Ask whether it's a triangle or a boundary on the left.
+ senext2(*searchsh, checksh);
+ spivotself(checksh);
+ if (checksh.sh == dummysh) {
+ leftflag = 0;
+ } else {
+ rightflag = 0;
+ }
+ }
+ while (leftflag) {
+ // Turn left until satisfied.
+ senext2self(*searchsh);
+ spivotself(*searchsh);
+ if (searchsh->sh == dummysh) {
+ printf("Internal error in finddirectionsub(): Unable to find a\n");
+ printf(" triangle leading from %d to %d.\n", pointmark(startpoint),
+ pointmark(tend));
+ internalerror();
+ }
+ adjustedgering(*searchsh, CCW);
+ leftpoint = sapex(*searchsh);
+ rightccw = leftccw;
+ leftccw = orient3d(tend, startpoint, liftpoint, leftpoint);
+ leftflag = leftccw > 0.0;
+ }
+ while (rightflag) {
+ // Turn right until satisfied.
+ spivotself(*searchsh);
+ if (searchsh->sh == dummysh) {
+ printf("Internal error in finddirectionsub(): Unable to find a\n");
+ printf(" triangle leading from %d to %d.\n", pointmark(startpoint),
+ pointmark(tend));
+ internalerror();
+ }
+ adjustedgering(*searchsh, CCW);
+ senextself(*searchsh);
+ rightpoint = sdest(*searchsh);
+ leftccw = rightccw;
+ rightccw = orient3d(startpoint, tend, liftpoint, rightpoint);
+ rightflag = rightccw > 0.0;
+ }
+ if (leftccw == 0.0) {
+ return LEFTCOLLINEAR;
+ } else if (rightccw == 0.0) {
+ return RIGHTCOLLINEAR;
+ } else {
+ return ACROSSEDGE;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insertsubseg() Create a subsegment and insert it between two subfaces. //
+// //
+// The new subsegment is inserted at the edge described by the handle 'tri'. //
+// If 'tri' is not on the hull, the segment is inserted between two faces. //
+// If 'tri' is a hull face, the initial face ring of this segment will be //
+// set only one face which is self-bonded. The official face ring will be //
+// constructed later in routine unifysegments(). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::insertsubseg(face* tri)
+{
+ face oppotri;
+ face newsubseg;
+
+ // Check if there's already a subsegment here.
+ sspivot(*tri, newsubseg);
+ if (newsubseg.sh == dummysh) {
+ // Make new subsegment and initialize its vertices.
+ makeshellface(subsegs, &newsubseg);
+ setsorg(newsubseg, sorg(*tri));
+ setsdest(newsubseg, sdest(*tri));
+ // Bond new subsegment to the two triangles it is sandwiched between.
+ ssbond(*tri, newsubseg);
+ spivot(*tri, oppotri);
+ // 'oppotri' might be "out space".
+ if (oppotri.sh != dummysh) {
+ ssbond(oppotri, newsubseg);
+ } else {
+ // Outside! Bond '*tri' to itself.
+ sbond(*tri, *tri);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// scoutsegmentsub() Scout the first triangle on the path from one point //
+// to another, and check for completion (reaching the //
+// second point), a collinear point,or the intersection //
+// of two segments. //
+// //
+// Returns true if the entire segment is successfully inserted, and false if //
+// the job must be finished by constrainededge(). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::scoutsegmentsub(face* searchsh, point tend)
+{
+ face newsubseg;
+ face crosssub, crosssubseg;
+ point leftpoint, rightpoint;
+ enum finddirectionresult collinear;
+
+ collinear = finddirectionsub(searchsh, tend);
+ rightpoint = sdest(*searchsh);
+ leftpoint = sapex(*searchsh);
+ if (rightpoint == tend || leftpoint == tend) {
+ // The segment is already an edge.
+ if (leftpoint == tend) {
+ senext2self(*searchsh);
+ }
+ // Insert a subsegment.
+ insertsubseg(searchsh);
+ return true;
+ } else if (collinear == LEFTCOLLINEAR) {
+ // We've collided with a vertex between the segment's endpoints.
+ // Make the collinear vertex be the triangle's origin.
+ senextself(*searchsh); // lprevself(*searchtri);
+ // Insert a subsegment.
+ insertsubseg(searchsh);
+ // Insert the remainder of the segment.
+ return scoutsegmentsub(searchsh, tend);
+ } else if (collinear == RIGHTCOLLINEAR) {
+ // We've collided with a vertex between the segment's endpoints.
+ // Insert a subsegment.
+ insertsubseg(searchsh);
+ // Make the collinear vertex be the triangle's origin.
+ senextself(*searchsh); // lnextself(*searchtri);
+ // Insert the remainder of the segment.
+ return scoutsegmentsub(searchsh, tend);
+ } else {
+ senext(*searchsh, crosssub); // lnext(*searchtri, crosstri);
+ // Check for a crossing segment.
+ sspivot(crosssub, crosssubseg);
+ assert(crosssubseg.sh == dummysh);
+ return false;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// delaunayfixup() Enforce the Delaunay condition at an edge, fanning out //
+// recursively from an existing point. Pay special //
+// attention to stacking inverted triangles. //
+// //
+// This is a support routine for inserting segments into a constrained //
+// Delaunay triangulation. //
+// //
+// The origin of 'fixupsh' is treated as if it has just been inserted, and //
+// the local Delaunay condition needs to be enforced. It is only enforced in //
+// one sector, however, that being the angular range defined by 'fixupsh'. //
+// //
+// `leftside' indicates whether or not fixupsh is to the left of the segment //
+// being inserted. (Imagine that the segment is pointing up from endpoint1 //
+// to endpoint2.) //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::delaunayfixup(face* fixupsh, int leftside)
+{
+ face nearsh, farsh, faredge;
+ point nearpoint, leftpoint, rightpoint, farpoint;
+ point liftpoint;
+ REAL sign;
+
+ // It is up to the caller, that 'fixupsh' must be in CCW edge ring.
+ // adjustedgering(*fixupsh, CCW);
+ assert((fixupsh->shver % 2) == 0);
+ senext(*fixupsh, nearsh);
+ spivot(nearsh, farsh);
+ if (nearsh.sh == farsh.sh) {
+ farsh.sh = dummysh;
+ }
+ // Check if the edge opposite the origin of fixupsh can be flipped.
+ if (farsh.sh == dummysh) {
+ return;
+ }
+ adjustedgering(farsh, CCW);
+ sspivot(nearsh, faredge);
+ if (faredge.sh != dummysh) {
+ return;
+ }
+ // Find all the relevant vertices.
+ liftpoint = getliftpoint(shellmark(*fixupsh));
+ nearpoint = sapex(nearsh);
+ leftpoint = sorg(nearsh);
+ rightpoint = sdest(nearsh);
+ farpoint = sapex(farsh);
+ // Check whether the previous polygon point is a reflex point.
+ if (leftside) {
+ if (orient3d(nearpoint, leftpoint, liftpoint, farpoint) <= 0.0) {
+ // leftpoint is a reflex point too. Nothing can
+ // be done until a convex section is found.
+ return;
+ }
+ } else {
+ if (orient3d(farpoint, rightpoint, liftpoint, nearpoint) <= 0.0) {
+ // rightpoint is a reflex point too. Nothing can
+ // be done until a convex section is found.
+ return;
+ }
+ }
+ if (orient3d(rightpoint, leftpoint, liftpoint, farpoint) > 0.0) {
+ // farsh is not an inverted triangle, and farpoint is not a reflex
+ // point. As there are no reflex vertices, fixupsh isn't an
+ // inverted triangle, either. Hence, test the edge between the
+ // triangles to ensure it is locally Delaunay.
+ sign = insphere(leftpoint, farpoint, rightpoint, liftpoint, nearpoint)
+ * orient3d(leftpoint, farpoint, rightpoint, liftpoint);
+ if (sign <= 0.0) {
+ return;
+ }
+ // Not locally Delaunay; go on to an edge flip.
+ } // else farsh is inverted; remove it from the stack by flipping.
+ flip22sub(&nearsh, NULL);
+ senext2self(*fixupsh); // Restore the origin of fixupsh after the flip.
+ // Recursively process the two triangles that result from the flip.
+ delaunayfixup(fixupsh, leftside);
+ delaunayfixup(&farsh, leftside);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// constrainededge() Force a segment into a constrained Delaunay //
+// triangulation by deleting the triangles it //
+// intersects, and triangulating the polygons that //
+// form on each side of it. //
+// //
+// Generates a single subsegment connecting `tstart' to `tend'. The triangle //
+// `startsh' has `tstart' as its origin. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::constrainededge(face* startsh, point tend)
+{
+ face fixupsh, fixupsh2;
+ face crosssubseg, newsubseg;
+ point tstart, farpoint;
+ point liftpoint;
+ REAL area;
+ int collision;
+ int done;
+
+ liftpoint = getliftpoint(shellmark(*startsh));
+ tstart = sorg(*startsh);
+ // Always works in the CCW edge ring.
+ adjustedgering(*startsh, CCW);
+ // Make sure the 'tstart' remians be the origin.
+ if (sorg(*startsh) != tstart) {
+ senextself(*startsh);
+ assert(sorg(*startsh) == tstart);
+ }
+ senext(*startsh, fixupsh);
+ flip22sub(&fixupsh, NULL);
+ // `collision' indicates whether we have found a vertex directly
+ // between endpoint1 and endpoint2.
+ collision = 0;
+ done = 0;
+ do {
+ farpoint = sorg(fixupsh);
+ // `farpoint' is the extreme point of the polygon we are "digging"
+ // to get from tstart to tend.
+ if (farpoint == tend) {
+ spivot(fixupsh, fixupsh2); // oprev(fixupsh, fixupsh2);
+ adjustedgering(fixupsh2, CCW);
+ senextself(fixupsh2);
+ // Enforce the Delaunay condition around tend.
+ delaunayfixup(&fixupsh, 0);
+ delaunayfixup(&fixupsh2, 1);
+ done = 1;
+ } else {
+ // Check whether farpoint is to the left or right of the segment
+ // being inserted, to decide which edge of fixupsh to dig
+ // through next.
+ area = orient3d(tstart, tend, liftpoint, farpoint);
+ if (area == 0.0) {
+ // We've collided with a vertex between tstart and tend.
+ collision = 1;
+ spivot(fixupsh, fixupsh2); // oprev(fixupsh, fixupsh2);
+ adjustedgering(fixupsh2, CCW);
+ senextself(fixupsh2);
+ // Enforce the Delaunay condition around farpoint.
+ delaunayfixup(&fixupsh, 0);
+ delaunayfixup(&fixupsh2, 1);
+ done = 1;
+ } else {
+ if (area > 0.0) { // farpoint is to the left of the segment.
+ spivot(fixupsh, fixupsh2); // oprev(fixupsh, fixupsh2);
+ adjustedgering(fixupsh2, CCW);
+ senextself(fixupsh2);
+ // Enforce the Delaunay condition around farpoint, on the
+ // left side of the segment only.
+ delaunayfixup(&fixupsh2, 1);
+ // Flip the edge that crosses the segment. After the edge is
+ // flipped, one of its endpoints is the fan vertex, and the
+ // destination of fixupsh is the fan vertex.
+ senext2self(fixupsh); // lprevself(fixupsh);
+ } else { // farpoint is to the right of the segment.
+ delaunayfixup(&fixupsh, 0);
+ // Flip the edge that crosses the segment. After the edge is
+ // flipped, one of its endpoints is the fan vertex, and the
+ // destination of fixupsh is the fan vertex.
+ spivotself(fixupsh); // oprevself(fixupsh);
+ adjustedgering(fixupsh, CCW);
+ senextself(fixupsh);
+ }
+ // Check for two intersecting segments.
+ sspivot(fixupsh, crosssubseg);
+ if (crosssubseg.sh == dummysh) {
+ flip22sub(&fixupsh, NULL);// May create inverted triangle at left.
+ } else {
+ // We've collided with a segment between tstart and tend.
+ /* collision = 1;
+ // Insert a vertex at the intersection.
+ segmentintersection(m, b, &fixupsh, &crosssubseg, tend);
+ done = 1;
+ */
+ assert(0);
+ }
+ }
+ }
+ } while (!done);
+ // Insert a subsegment to make the segment permanent.
+ insertsubseg(&fixupsh);
+ // If there was a collision with an interceding vertex, install another
+ // segment connecting that vertex with endpoint2.
+ if (collision) {
+ // Insert the remainder of the segment.
+ if (!scoutsegmentsub(&fixupsh, tend)) {
+ constrainededge(&fixupsh, tend);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insertsegmentsub() Insert a PSLG segment into a triangulation. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::insertsegmentsub(point tstart, point tend)
+{
+ face searchsh1, searchsh2;
+
+ if (b->verbose > 2) {
+ printf(" Insert subsegment (%d, %d).\n", pointmark(tstart),
+ pointmark(tend));
+ }
+
+ // Find a triangle whose origin is the segment's first endpoint.
+ searchsh1.sh = dummysh;
+ // Search for the segment's first endpoint by point location.
+ if (locatesub(tstart, &searchsh1, 0) != ONVERTEX) {
+ printf("Internal error in insertsegmentsub():");
+ printf(" Unable to locate PSLG vertex %d.\n", pointmark(tstart));
+ internalerror();
+ }
+ // Scout the beginnings of a path from the first endpoint
+ // toward the second.
+ if (scoutsegmentsub(&searchsh1, tend)) {
+ // The segment was easily inserted.
+ return;
+ }
+ // The first endpoint may have changed if a collision with an intervening
+ // vertex on the segment occurred.
+ tstart = sorg(searchsh1);
+
+ // Find a boundary triangle to search from.
+ searchsh2.sh = dummysh;
+ // Search for the segment's second endpoint by point location.
+ if (locatesub(tend, &searchsh2, 0) != ONVERTEX) {
+ printf("Internal error in insertsegmentsub():");
+ printf(" Unable to locate PSLG vertex %d.\n", pointmark(tend));
+ internalerror();
+ }
+ // Scout the beginnings of a path from the second endpoint
+ // toward the first.
+ if (scoutsegmentsub(&searchsh2, tstart)) {
+ // The segment was easily inserted.
+ return;
+ }
+ // The second endpoint may have changed if a collision with an intervening
+ // vertex on the segment occurred.
+ tend = sorg(searchsh2);
+
+ // Insert the segment directly into the triangulation.
+ constrainededge(&searchsh1, tend);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// infecthullsub() Virally infect all of the triangles of the convex hull //
+// that are not protected by subsegments. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::infecthullsub(memorypool* viri)
+{
+ face hulltri, nexttri, starttri;
+ face hullsubseg;
+ shellface **deadshellface;
+
+ // Find a triangle handle on the hull.
+ hulltri.sh = dummysh;
+ hulltri.shver = 0;
+ spivotself(hulltri);
+ adjustedgering(hulltri, CCW);
+ // Remember where we started so we know when to stop.
+ starttri = hulltri;
+ // Go once counterclockwise around the convex hull.
+ do {
+ // Ignore triangles that are already infected.
+ if (!sinfected(hulltri)) {
+ // Is the triangle protected by a subsegment?
+ sspivot(hulltri, hullsubseg);
+ if (hullsubseg.sh == dummysh) {
+ // The triangle is not protected; infect it.
+ if (!sinfected(hulltri)) {
+ sinfect(hulltri);
+ deadshellface = (shellface **) viri->alloc();
+ *deadshellface = hulltri.sh;
+ }
+ }
+ }
+ // To find the next hull edge, go clockwise around the next vertex.
+ senextself(hulltri); // lnextself(hulltri);
+ spivot(hulltri, nexttri); // oprev(hulltri, nexttri);
+ if (nexttri.sh == hulltri.sh) {
+ nexttri.sh = dummysh; // 'hulltri' is self-bonded.
+ } else {
+ adjustedgering(nexttri, CCW);
+ senextself(nexttri);
+ }
+ while (nexttri.sh != dummysh) {
+ hulltri = nexttri;
+ spivot(hulltri, nexttri); // oprev(hulltri, nexttri);
+ if (nexttri.sh == hulltri.sh) {
+ nexttri.sh = dummysh; // 'hulltri' is self-bonded.
+ } else {
+ adjustedgering(nexttri, CCW);
+ senextself(nexttri);
+ }
+ }
+ } while (hulltri != starttri);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// plaguesub() Spread the virus from all infected triangles to any //
+// neighbors not protected by subsegments. Delete all //
+// infected triangles. //
+// //
+// This is the procedure that actually creates holes and concavities. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::plaguesub(memorypool* viri)
+{
+ face testtri, neighbor, ghostsh;
+ face neighborsubseg;
+ shellface **virusloop;
+ shellface **deadshellface;
+ int i;
+
+ // Loop through all the infected triangles, spreading the virus to
+ // their neighbors, then to their neighbors' neighbors.
+ viri->traversalinit();
+ virusloop = (shellface **) viri->traverse();
+ while (virusloop != (shellface **) NULL) {
+ testtri.sh = *virusloop;
+ // Check each of the triangle's three neighbors.
+ for (i = 0; i < 3; i++) {
+ // Find the neighbor.
+ spivot(testtri, neighbor);
+ // Check for a subsegment between the triangle and its neighbor.
+ sspivot(testtri, neighborsubseg);
+ // Check if the neighbor is nonexistent or already infected.
+ if ((neighbor.sh == dummysh) || sinfected(neighbor)) {
+ if (neighborsubseg.sh != dummysh) {
+ // There is a subsegment separating the triangle from its
+ // neighbor, but both triangles are dying, so the subsegment
+ // dies too.
+ shellfacedealloc(subsegs, neighborsubseg.sh);
+ if (neighbor.sh != dummysh) {
+ // Make sure the subsegment doesn't get deallocated again
+ // later when the infected neighbor is visited.
+ ssdissolve(neighbor);
+ }
+ }
+ } else { // The neighbor exists and is not infected.
+ if (neighborsubseg.sh == dummysh) {
+ // There is no subsegment protecting the neighbor, so the
+ // neighbor becomes infected.
+ sinfect(neighbor);
+ // Ensure that the neighbor's neighbors will be infected.
+ deadshellface = (shellface **) viri->alloc();
+ *deadshellface = neighbor.sh;
+ } else { // The neighbor is protected by a subsegment.
+ // Remove this triangle from the subsegment.
+ ssbond(neighbor, neighborsubseg);
+ }
+ }
+ senextself(testtri);
+ }
+ virusloop = (shellface **) viri->traverse();
+ }
+
+ ghostsh.sh = dummysh; // A handle of outer space.
+ viri->traversalinit();
+ virusloop = (shellface **) viri->traverse();
+ while (virusloop != (shellface **) NULL) {
+ testtri.sh = *virusloop;
+ // Record changes in the number of boundary edges, and disconnect
+ // dead triangles from their neighbors.
+ for (i = 0; i < 3; i++) {
+ spivot(testtri, neighbor);
+ if (neighbor.sh != dummysh) {
+ // Disconnect the triangle from its neighbor.
+ // sdissolve(neighbor);
+ sbond(neighbor, ghostsh);
+ }
+ senextself(testtri);
+ }
+ // Return the dead triangle to the pool of triangles.
+ shellfacedealloc(subfaces, testtri.sh);
+ virusloop = (shellface **) viri->traverse();
+ }
+ // Empty the virus pool.
+ viri->restart();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// carveholessub() Find the holes and infect them. Find the area //
+// constraints and infect them. Infect the convex hull. //
+// Spread the infection and kill triangles. Spread the //
+// area constraints. //
+// //
+// This routine mainly calls other routines to carry out all these functions.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::carveholessub(int holes, REAL* holelist)
+{
+ face searchtri, triangleloop;
+ shellface **holetri;
+ memorypool *viri;
+ enum locateresult intersect;
+ int i;
+
+ // Initialize a pool of viri to be used for holes, concavities.
+ viri = new memorypool(sizeof(shellface *), 1024, POINTER, 0);
+
+ // Mark as infected any unprotected triangles on the boundary.
+ // This is one way by which concavities are created.
+ infecthullsub(viri);
+
+ if (holes > 0) {
+ // Infect each triangle in which a hole lies.
+ for (i = 0; i < 3 * holes; i += 3) {
+ // Ignore holes that aren't within the bounds of the mesh.
+ if ((holelist[i] >= xmin) && (holelist[i] <= xmax)
+ && (holelist[i + 1] >= ymin) && (holelist[i + 1] <= ymax)
+ && (holelist[i + 2] >= zmin) && (holelist[i + 2] <= zmax)) {
+ // Start searching from some triangle on the outer boundary.
+ searchtri.sh = dummysh;
+ // Find a triangle that contains the hole.
+ intersect = locatesub(&holelist[i], &searchtri, 0);
+ if ((intersect != OUTSIDE) && (!sinfected(searchtri))) {
+ // Infect the triangle. This is done by marking the triangle
+ // as infected and including the triangle in the virus pool.
+ sinfect(searchtri);
+ holetri = (shellface **) viri->alloc();
+ *holetri = searchtri.sh;
+ }
+ }
+ }
+ }
+
+ if (viri->items > 0) {
+ // Carve the holes and concavities.
+ plaguesub(viri);
+ }
+ // The virus pool should be empty now.
+
+ // Free up memory.
+ delete viri;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// triangulatefacet() Create a constrained Delaunay triang. for a facet. //
+// //
+// 'facetidx' is the index of the facet in 'in->facetlist' (starts from 1), //
+// 'idx2verlist' is a map from indices to vertices. 'ptlist' and 'conlist' //
+// are two lists used to assemble the input data for each facet, 'ptlist' //
+// stores the index set of its vertices, 'conlist' stores the set of its //
+// segments, they should be empty on input and output. //
+// //
+// The duplicated points (marked with the type DUPLICATEDVERTEX by routine //
+// "incrflipdelaunay()") are handled before starting to mesh the facet. Let //
+// p and q are duplicated, i.e., they have exactly the same coordinates, and //
+// the index of p is larger than q, p is substituted by q. In a STL mesh, //
+// duplicated points are implicitly included. //
+// //
+// On completion, the CDT of this facet is constructed in pool 'subfaces'. //
+// Every isolated point on the facet will be set a type of FACETVERTEX. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+triangulatefacet(int facetidx, list* ptlist, list* conlist, point* idx2verlist,
+ queue* flipqueue)
+{
+ tetgenio::facet *f;
+ tetgenio::polygon *p;
+ point tstart, tend;
+ int *cons, idx1, idx2;
+ int end1, end2;
+ int i, j;
+
+ if (b->verbose > 1) {
+ printf(" Triangulate facet %d.\n", facetidx);
+ }
+
+ // Get the pointer of the facet.
+ f = &in->facetlist[facetidx - 1];
+
+ // Are there duplicated points?
+ if ((b->object == tetgenbehavior::STL) || dupverts) {
+ // Loop all polygons of this facet.
+ for (i = 0; i < f->numberofpolygons; i++) {
+ p = &(f->polygonlist[i]);
+ // Loop other vertices of this polygon.
+ for (j = 0; j < p->numberofvertices; j++) {
+ idx1 = p->vertexlist[j];
+ tstart = idx2verlist[idx1 - in->firstnumber];
+ if (pointtype(tstart) == DUPLICATEDVERTEX) {
+ // Reset the index of vertex-j.
+ tend = point2pt(tstart);
+ idx2 = pointmark(tend);
+ p->vertexlist[j] = idx2;
+ }
+ }
+ }
+ }
+
+ // Loop all polygons of this facet, get the sets of vertices and segments.
+ for (i = 0; i < f->numberofpolygons; i++) {
+ p = &(f->polygonlist[i]);
+ // Get the first vertex.
+ end1 = p->vertexlist[0];
+ if ((end1 < in->firstnumber) ||
+ (end1 >= in->firstnumber + in->numberofpoints)) {
+ if (!b->quiet) {
+ printf("Warning: Invalid the 1st vertex %d of polygon", end1);
+ printf(" %d in facet %d.\n", i + 1, facetidx);
+ }
+ break; // Skip to mesh this facet.
+ }
+ // Save it in 'ptlist' if it didn't be added, and set its position.
+ idx1 = ptlist->hasitem(&end1);
+ if (idx1 == -1) {
+ ptlist->append(&end1);
+ idx1 = ptlist->len() - 1;
+ }
+ // Loop other vertices of this polygon.
+ for (j = 1; j <= p->numberofvertices; j++) {
+ // get a vertex.
+ if (j < p->numberofvertices) {
+ end2 = p->vertexlist[j];
+ } else {
+ end2 = p->vertexlist[0]; // Form a loop from last to first.
+ }
+ if ((end2 < in->firstnumber) ||
+ (end2 >= in->firstnumber + in->numberofpoints)) {
+ if (!b->quiet) {
+ printf("Warning: Invalid vertex %d in polygon %d", end2, i + 1);
+ printf(" in facet %d.\n", facetidx);
+ }
+ } else {
+ if (end1 != end2) {
+ // 'end1' and 'end2' form a segment. Save 'end2' in 'ptlist' if
+ // it didn't be added before.
+ idx2 = ptlist->hasitem(&end2);
+ if (idx2 == -1) {
+ ptlist->append(&end2);
+ idx2 = ptlist->len() - 1;
+ }
+ // Save the segment in 'conlist'.
+ cons = (int *) conlist->append(NULL);
+ cons[0] = idx1;
+ cons[1] = idx2;
+ // Set the start for next continuous segment.
+ end1 = end2;
+ idx1 = idx2;
+ } else {
+ // It's a (degenerate) segment with identical endpoints, which
+ // represents an isolate vertex in facet.
+ if (p->numberofvertices > 2) {
+ // This may be an error in the input, anyway, we can continue
+ // by simply skipping this segment.
+ if (!b->quiet) {
+ printf("Warning: Polygon %d has two identical vertices", i + 1);
+ printf(" in facet %d.\n", facetidx);
+ }
+ }
+ // Ignore this vertex.
+ }
+ }
+ if (p->numberofvertices == 2) {
+ // This case the polygon is either a segment or an isolated vertex.
+ break;
+ }
+ }
+ }
+
+ // Have got the vertex list and segment list.
+ if (b->verbose > 1) {
+ printf(" %d vertices, %d segments", ptlist->len(), conlist->len());
+ if (f->numberofholes > 0) {
+ printf(", %d holes", f->numberofholes);
+ }
+ printf(".\n");
+ }
+
+ if (ptlist->len() > 2) {
+ // Construct an initial triangulation.
+ if (incrflipinitsub(facetidx, ptlist, idx2verlist)) {
+ if (ptlist->len() > 3) {
+ // Create the Delaunay triangulation of 'ptlist'.
+ incrflipdelaunaysub(facetidx, ptlist, idx2verlist, flipqueue);
+ }
+ // Insert segments (in 'conlist') into the Delaunay triangulation.
+ for (i = 0; i < conlist->len(); i++) {
+ cons = (int *)(* conlist)[i];
+ idx1 = * (int *)(* ptlist)[cons[0]];
+ tstart = idx2verlist[idx1 - in->firstnumber];
+ idx2 = * (int *)(* ptlist)[cons[1]];
+ tend = idx2verlist[idx2 - in->firstnumber];
+ insertsegmentsub(tstart, tend);
+ }
+ if (ptlist->len() > 3 && conlist->len() > 3) {
+ // Carve holes and concavities.
+ carveholessub(f->numberofholes, f->holelist);
+ }
+ }
+ }
+
+ // Clear working lists.
+ ptlist->clear();
+ conlist->clear();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// unifysegments() Unify identical segments and build facet connections. //
+// //
+// After creating the surface mesh. Each facet has its own segments. There //
+// are duplicated segments between adjacent facets. This routine has three //
+// purposes: //
+// (1) identify the set of segments which have the same endpoints and //
+// unify them into one segment, remove redundant ones; //
+// (2) create the face rings of the unified segments, hence setup the //
+// connections between facets; and //
+// (3) set a unique marker (1-based) for each segment. //
+// On finish, each segment is unique and the face ring around it (right-hand //
+// rule) is constructed. The connections between facets-facets are setup. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::unifysegments()
+{
+ list *sfacelist;
+ shellface **facesperverlist;
+ face subsegloop, testseg;
+ face sface, sface1, sface2;
+ point torg, tdest;
+ REAL da1, da2;
+ int *idx2facelist;
+ int segmarker;
+ int idx, k, m;
+
+ if (b->verbose) {
+ printf(" Unifying segments.\n");
+ }
+
+ // Compute a mapping from indices of vertices to subfaces.
+ makesubfacemap(idx2facelist, facesperverlist);
+ // Initialize 'sfacelist' for constructing the face link of each segment.
+ sfacelist = new list(sizeof(face), NULL);
+
+ segmarker = 1;
+ subsegs->traversalinit();
+ subsegloop.sh = shellfacetraverse(subsegs);
+ while (subsegloop.sh != (shellface *) NULL) {
+ subsegloop.shver = 0; // For sure.
+ torg = sorg(subsegloop);
+ tdest = sdest(subsegloop);
+ idx = pointmark(torg) - in->firstnumber;
+ // Loop through the set of subfaces containing 'torg'. Get all the
+ // subfaces containing the edge (torg, tdest). Save and order them
+ // in 'sfacelist', the ordering is defined by the right-hand rule
+ // with thumb points from torg to tdest.
+ for (k = idx2facelist[idx]; k < idx2facelist[idx + 1]; k++) {
+ sface.sh = facesperverlist[k];
+ sface.shver = 0;
+ // sface may be died due to the removing of duplicated subfaces.
+ if (!isdead(&sface) && isfacehasedge(&sface, torg, tdest)) {
+ // 'sface' contains this segment.
+ findedge(&sface, torg, tdest);
+ // Save it in 'sfacelist'.
+ if (sfacelist->len() < 2) {
+ sfacelist->append(&sface);
+ } else {
+ for (m = 0; m < sfacelist->len() - 1; m++) {
+ sface1 = * (face *)(* sfacelist)[m];
+ sface2 = * (face *)(* sfacelist)[m + 1];
+ da1 = facedihedral(torg, tdest, sapex(sface1), sapex(sface));
+ da2 = facedihedral(torg, tdest, sapex(sface1), sapex(sface2));
+ if (da1 < da2) {
+ break; // Insert it after m.
+ }
+ }
+ sfacelist->insert(m + 1, &sface);
+ }
+ }
+ }
+ if (b->verbose > 1) {
+ printf(" Identifying %d segments of (%d %d).\n", sfacelist->len(),
+ pointmark(torg), pointmark(tdest));
+ }
+ // Set the connection between this segment and faces containing it,
+ // at the same time, remove redundant segments.
+ for (k = 0; k < sfacelist->len(); k++) {
+ sface = *(face *)(* sfacelist)[k];
+ sspivot(sface, testseg);
+ // If 'testseg' is not 'subsegloop', it is a redundant segment that
+ // needs be removed. BE CAREFUL it may already be removed. Do not
+ // remove it twice, i.e., do test 'isdead()' together.
+ if ((testseg.sh != subsegloop.sh) && !isdead(&testseg)) {
+ shellfacedealloc(subsegs, testseg.sh);
+ }
+ // 'ssbond' bonds the subface and the segment together, and dissloves
+ // the old bond as well.
+ ssbond(sface, subsegloop);
+ }
+ // Set connection between these faces.
+ sface = *(face *)(* sfacelist)[0];
+ for (k = 1; k <= sfacelist->len(); k++) {
+ if (k < sfacelist->len()) {
+ sface1 = *(face *)(* sfacelist)[k];
+ } else {
+ sface1 = *(face *)(* sfacelist)[0]; // Form a face loop.
+ }
+ /*
+ // Check if these two subfaces are the same. It is possible when user
+ // defines one facet (or polygon) two or more times. If they are,
+ // they should not be bonded together, instead of that, one of them
+ // should be delete from the surface mesh.
+ if ((sfacelist->len() > 1) && sapex(sface) == sapex(sface1)) {
+ // They are duplicated faces.
+ if (b->verbose) {
+ printf(" A duplicated subface (%d, %d, %d) is removed.\n",
+ pointmark(torg), pointmark(tdest), pointmark(sapex(sface)));
+ }
+ if (k == sfacelist->len()) {
+ // 'sface' is the last face, however, it is same as the first one.
+ // In order to form the ring, we have to let the second last
+ // face bond to the first one 'sface1'.
+ shellfacedealloc(subfaces, sface.sh);
+ assert(sfacelist->len() >= 2);
+ assert(k == sfacelist->len());
+ sface = *(face *)(* sfacelist)[k - 2];
+ } else {
+ // 'sface1' is in the middle and may be the last one.
+ shellfacedealloc(subfaces, sface1.sh);
+ // Skip this face and go to the next one.
+ continue;
+ }
+ }
+ */
+ if (b->verbose > 2) {
+ printf(" Bond subfaces (%d, %d, %d) and (%d, %d, %d).\n",
+ pointmark(torg), pointmark(tdest), pointmark(sapex(sface)),
+ pointmark(torg), pointmark(tdest), pointmark(sapex(sface1)));
+ }
+ sbond1(sface, sface1);
+ sface = sface1;
+ }
+ // Set the unique segment marker into the unified segment.
+ setshellmark(subsegloop, segmarker);
+ // Increase the marker.
+ segmarker++;
+ // Clear the working list.
+ sfacelist->clear();
+ subsegloop.sh = shellfacetraverse(subsegs);
+ }
+
+ delete [] idx2facelist;
+ delete [] facesperverlist;
+ delete sfacelist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// mergefacets() Merge adjacent facets to be one facet if they are //
+// coplanar and have the same boundary marker. //
+// //
+// Segments between two merged facets will be removed from the mesh. If all //
+// segments around a vertex have been removed, change its vertex type to be //
+// FACETVERTEX. Edge flips will be performed to ensure the Delaunay criteria //
+// of the triangulation of merged facets. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::mergefacets(queue* flipqueue)
+{
+ face parentsh, neighsh, neineighsh;
+ face segloop;
+ point eorg, edest;
+ REAL ori;
+ bool mergeflag, pbcflag;
+ int* segspernodelist;
+ int fidx1, fidx2;
+ int i, j;
+
+ if (b->verbose) {
+ printf(" Merging coplanar facets.\n");
+ }
+ // Create and initialize 'segspernodelist'.
+ segspernodelist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) {
+ segspernodelist[i] = 0;
+ }
+
+ // Loop the segments, counter the number of segments sharing each vertex.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ // Increment the number of sharing segments for each endpoint.
+ for (i = 0; i < 2; i++) {
+ j = pointmark((point) segloop.sh[3 + i]);
+ segspernodelist[j]++;
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+
+ // Loop the segments, find out dead segments.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ eorg = sorg(segloop);
+ edest = sdest(segloop);
+ spivot(segloop, parentsh);
+ spivot(parentsh, neighsh);
+ spivot(neighsh, neineighsh);
+ if (parentsh.sh != neighsh.sh && parentsh.sh == neineighsh.sh) {
+ // Exactly two subfaces at this segment.
+ fidx1 = shellmark(parentsh) - 1;
+ fidx2 = shellmark(neighsh) - 1;
+ pbcflag = false;
+ if (checkpbcs) {
+ pbcflag = (shellpbcgroup(parentsh) >= 0)
+ || (shellpbcgroup(neighsh) >= 0);
+ }
+ // Possibly merge them if they are not in the same facet.
+ if ((fidx1 != fidx2) && !pbcflag) {
+ // Test if they are coplanar.
+ ori = orient3d(eorg, edest, sapex(parentsh), sapex(neighsh));
+ if (ori != 0.0) {
+ if (iscoplanar(eorg, edest, sapex(parentsh), sapex(neighsh), ori,
+ b->epsilon)) {
+ ori = 0.0; // They are assumed as coplanar.
+ }
+ }
+ if (ori == 0.0) {
+ mergeflag = (in->facetmarkerlist == (int *) NULL ||
+ in->facetmarkerlist[fidx1] == in->facetmarkerlist[fidx2]);
+ if (mergeflag) {
+ // This segment becomes dead.
+ if (b->verbose > 1) {
+ printf(" Removing segment (%d, %d).\n", pointmark(eorg),
+ pointmark(edest));
+ }
+ ssdissolve(parentsh);
+ ssdissolve(neighsh);
+ shellfacedealloc(subsegs, segloop.sh);
+ j = pointmark(eorg);
+ segspernodelist[j]--;
+ if (segspernodelist[j] == 0) {
+ setpointtype(eorg, FACETVERTEX);
+ }
+ j = pointmark(edest);
+ segspernodelist[j]--;
+ if (segspernodelist[j] == 0) {
+ setpointtype(edest, FACETVERTEX);
+ }
+ // Add 'parentsh' to queue checking for flip.
+ enqueueflipedge(parentsh, flipqueue);
+ }
+ }
+ }
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+
+ if (!flipqueue->empty()) {
+ // Restore the Delaunay property in the facet triangulation.
+ flipsub(flipqueue);
+ }
+
+ delete [] segspernodelist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// assignvarconstraints() Assign constraints to facets, segs, and nodes. //
+// //
+// The variant constraints of facets, segments and nodes are defined in file //
+// 'filename.cons'. These information have been loaded in 'in'. //
+// //
+// This routine will be called in meshsurface() (when -p switch is in use), //
+// and in reconstructmesh() (when -r switch is in use). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::assignvarconstraints(point *idx2verlist)
+{
+ face subloop, segloop;
+ point p1, p2;
+ REAL area;
+ int fmarker, fidx;
+ int end1, end2;
+ int i;
+
+ if (in->facetconstraintlist != (REAL *) NULL) {
+ if (b->verbose) {
+ printf(" Assigning facet constraints.\n");
+ }
+ for (i = 0; i < in->numberoffacetconstraints; i++) {
+ fmarker = (int) in->facetconstraintlist[i * 2];
+ area = in->facetconstraintlist[i * 2 + 1];
+ // Assign 'area' to all subfaces which having 'fmarker'.
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ fidx = shellmark(subloop) - 1;
+ if (in->facetmarkerlist[fidx] == fmarker) {
+ setareabound(subloop, area);
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+ }
+ }
+
+ if (in->segmentconstraintlist != (REAL *) NULL) {
+ if (b->verbose) {
+ printf(" Assigning segment constraints.\n");
+ }
+ for (i = 0; i < in->numberofsegmentconstraints; i++) {
+ end1 = (int) in->segmentconstraintlist[i * 3];
+ end2 = (int) in->segmentconstraintlist[i * 3 + 1];
+ area = in->segmentconstraintlist[i * 3 + 2];
+ // Assign 'area' to segment has (end1, end2).
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ p1 = (point) segloop.sh[3];
+ p2 = (point) segloop.sh[4];
+ if (((pointmark(p1) == end1) && (pointmark(p2) == end2)) ||
+ ((pointmark(p1) == end2) && (pointmark(p2) == end1))) {
+ setareabound(segloop, area);
+ break;
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+ }
+ }
+
+ if (in->nodeconstraintlist != (REAL *) NULL) {
+ if (b->verbose) {
+ printf(" Assigning node constraints.\n");
+ }
+ for (i = 0; i < in->numberofnodeconstraints; i++) {
+ end1 = (int) in->nodeconstraintlist[i * 2];
+ area = in->nodeconstraintlist[i * 2 + 1];
+ end1 -= in->firstnumber;
+ if ((end1 >= 0) && (end1 < in->numberofpoints)) {
+ p1 = idx2verlist[end1];
+ setedgebound(p1, area);
+ }
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// meshsurface() Create the surface mesh of a PLC. //
+// //
+// The surface mesh of a PLC X is a triangulation consists of subfaces and //
+// segments. Subfaces are 2-dimensional constrained Delaunay triangulations //
+// of the facets of X, segments are edges bounded the facets. //
+// //
+// Subfaces of each facet are connecting each other. Each segment contains a //
+// ring of subfaces which saves the connection between facets sharing at it. //
+// //
+// This routine first creates the CDTs of facets separatly, i.e., each facet //
+// will be meshed into a set of subfaces and segments. As a result, subfaces //
+// only have connections to subfaces which are belong to the same facet. And //
+// segments are over-created. Routine unifysegment() is called to remove the //
+// redundant segments and create the subface ring around segments. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+long tetgenmesh::meshsurface()
+{
+ list *ptlist, *conlist;
+ queue *flipqueue;
+ point *idx2verlist;
+ int i;
+
+ if (!b->quiet) {
+ printf("Creating surface mesh.\n");
+ }
+
+ // Compute a mapping from indices to points.
+ makeindex2pointmap(idx2verlist);
+ // Initialize 'flipqueue'.
+ flipqueue = new queue(sizeof(badface));
+ // Two re-useable lists 'ptlist' and 'conlist'.
+ ptlist = new list("int");
+ conlist = new list(sizeof(int) * 2, NULL);
+ // Initialize 'liftpointarray'.
+ liftpointarray = new REAL[in->numberoffacets * 3];
+
+ if (checkpbcs) {
+ // Create the 'subpbcgrouptable'.
+ createsubpbcgrouptable();
+ }
+
+ // Loop the facet list, triangulate each facet. On finish, all subfaces
+ // are in 'subfaces', all segments are in 'subsegs' (Note: there exist
+ // duplicated segments).
+ for (i = 0; i < in->numberoffacets; i++) {
+ triangulatefacet(i + 1, ptlist, conlist, idx2verlist, flipqueue);
+ }
+
+ // Unify segments in 'subsegs', remove redundant segments. Face links
+ // of segments are also built.
+ unifysegments();
+
+ if (checkpbcs) {
+ // Create the 'segpbcgrouptable'.
+ createsegpbcgrouptable();
+ }
+
+ if (b->object == tetgenbehavior::STL) {
+ // Remove redundant vertices (for .stl input mesh).
+ jettisonnodes();
+ }
+
+ if (!b->nomerge) {
+ // Merge adjacent facets if they are coplanar.
+ mergefacets(flipqueue);
+ }
+
+ if (b->quality && varconstraint) {
+ // Assign constraints on facets, segments, and nodes.
+ assignvarconstraints(idx2verlist);
+ }
+
+ delete [] idx2verlist;
+ delete flipqueue;
+ delete conlist;
+ delete ptlist;
+
+ return subsegs->items;
+}
+
+//
+// End of surface triangulation routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// interecursive() Recursively do intersection test on a set of triangles.//
+// //
+// Recursively split the set 'subfacearray' of subfaces into two sets using //
+// a cut plane parallel to x-, or, y-, or z-axies. The split criteria are //
+// follows. Assume the cut plane is H, and H+ denotes the left halfspace of //
+// H, and H- denotes the right halfspace of H; and s be a subface: //
+// //
+// (1) If all points of s lie at H+, put it into left array; //
+// (2) If all points of s lie at H-, put it into right array; //
+// (3) If some points of s lie at H+ and some of lie at H-, or some //
+// points lie on H, put it into both arraies. //
+// //
+// Partitions by x-axis if axis == '0'; by y-axis if axis == '1'; by z-axis //
+// if axis == '2'. If current cut plane is parallel to the x-axis, the next //
+// one will be parallel to y-axis, and the next one after the next is z-axis,//
+// and then alternately return back to x-axis. //
+// //
+// Stop splitting when the number of triangles of the input array is not //
+// decreased anymore. Do tests on the current set. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+interecursive(shellface** subfacearray, int arraysize, int axis, REAL bxmin,
+ REAL bxmax, REAL bymin, REAL bymax, REAL bzmin, REAL bzmax,
+ int* internum)
+{
+ shellface **leftarray, **rightarray;
+ face sface1, sface2;
+ point p1, p2, p3;
+ point p4, p5, p6;
+ enum interresult intersect;
+ REAL split;
+ bool toleft, toright;
+ int leftsize, rightsize;
+ int i, j;
+
+ if (b->verbose > 1) {
+ printf(" Recur %d faces. Bbox (%g, %g, %g),(%g, %g, %g). %s-axis\n",
+ arraysize, bxmin, bymin, bzmin, bxmax, bymax, bzmax,
+ axis == 0 ? "x" : (axis == 1 ? "y" : "z"));
+ }
+
+ leftarray = new shellface*[arraysize];
+ if (leftarray == NULL) {
+ printf("Error in interecursive(): Insufficient memory.\n");
+ exit(1);
+ }
+ rightarray = new shellface*[arraysize];
+ if (rightarray == NULL) {
+ printf("Error in interecursive(): Insufficient memory.\n");
+ exit(1);
+ }
+ leftsize = rightsize = 0;
+
+ if (axis == 0) {
+ // Split along x-axis.
+ split = 0.5 * (bxmin + bxmax);
+ } else if (axis == 1) {
+ // Split along y-axis.
+ split = 0.5 * (bymin + bymax);
+ } else {
+ // Split along z-axis.
+ split = 0.5 * (bzmin + bzmax);
+ }
+
+ for (i = 0; i < arraysize; i++) {
+ sface1.sh = subfacearray[i];
+ p1 = (point) sface1.sh[3];
+ p2 = (point) sface1.sh[4];
+ p3 = (point) sface1.sh[5];
+ toleft = toright = false;
+ if (p1[axis] < split) {
+ toleft = true;
+ if (p2[axis] >= split || p3[axis] >= split) {
+ toright = true;
+ }
+ } else if (p1[axis] > split) {
+ toright = true;
+ if (p2[axis] <= split || p3[axis] <= split) {
+ toleft = true;
+ }
+ } else {
+ // p1[axis] == split;
+ toleft = true;
+ toright = true;
+ }
+ // At least one is true;
+ assert(!(toleft == false && toright == false));
+ if (toleft) {
+ leftarray[leftsize] = sface1.sh;
+ leftsize++;
+ }
+ if (toright) {
+ rightarray[rightsize] = sface1.sh;
+ rightsize++;
+ }
+ }
+
+ if (leftsize < arraysize && rightsize < arraysize) {
+ // Continue to partition the input set. Now 'subfacearray' has been
+ // split into two sets, it's memory can be freed. 'leftarray' and
+ // 'rightarray' will be freed in the next recursive (after they're
+ // partitioned again or performing tests).
+ delete [] subfacearray;
+ // Continue to split these two sets.
+ if (axis == 0) {
+ interecursive(leftarray, leftsize, 1, bxmin, split, bymin, bymax,
+ bzmin, bzmax, internum);
+ interecursive(rightarray, rightsize, 1, split, bxmax, bymin, bymax,
+ bzmin, bzmax, internum);
+ } else if (axis == 1) {
+ interecursive(leftarray, leftsize, 2, bxmin, bxmax, bymin, split,
+ bzmin, bzmax, internum);
+ interecursive(rightarray, rightsize, 2, bxmin, bxmax, split, bymax,
+ bzmin, bzmax, internum);
+ } else {
+ interecursive(leftarray, leftsize, 0, bxmin, bxmax, bymin, bymax,
+ bzmin, split, internum);
+ interecursive(rightarray, rightsize, 0, bxmin, bxmax, bymin, bymax,
+ split, bzmax, internum);
+ }
+ } else {
+ if (b->verbose > 1) {
+ printf(" Checking intersecting faces.\n");
+ }
+ // Perform a brute-force compare on the set.
+ for (i = 0; i < arraysize; i++) {
+ sface1.sh = subfacearray[i];
+ p1 = (point) sface1.sh[3];
+ p2 = (point) sface1.sh[4];
+ p3 = (point) sface1.sh[5];
+ for (j = i + 1; j < arraysize; j++) {
+ sface2.sh = subfacearray[j];
+ p4 = (point) sface2.sh[3];
+ p5 = (point) sface2.sh[4];
+ p6 = (point) sface2.sh[5];
+ intersect = tri_tri_inter(p1, p2, p3, p4, p5, p6);
+ if (intersect == INTERSECT || intersect == SHAREFACE) {
+ if (!b->quiet) {
+ if (intersect == INTERSECT) {
+ printf(" Facet #%d intersects facet #%d at triangles:\n",
+ shellmark(sface1), shellmark(sface2));
+ printf(" (%4d, %4d, %4d) and (%4d, %4d, %4d)\n",
+ pointmark(p1), pointmark(p2), pointmark(p3),
+ pointmark(p4), pointmark(p5), pointmark(p6));
+ } else {
+ printf(" Facet #%d duplicates facet #%d at triangle:\n",
+ shellmark(sface1), shellmark(sface2));
+ printf(" (%4d, %4d, %4d)\n", pointmark(p1), pointmark(p2),
+ pointmark(p3));
+ }
+ }
+ // Increase the number of intersecting pairs.
+ (*internum)++;
+ // Infect these two faces (although they may already be infected).
+ sinfect(sface1);
+ sinfect(sface2);
+ }
+ }
+ }
+ // Don't forget to free all three arrays. No further partition.
+ delete [] leftarray;
+ delete [] rightarray;
+ delete [] subfacearray;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// detectinterfaces() Detect intersecting triangles. //
+// //
+// Given a set of triangles, find the pairs of intersecting triangles from //
+// them. Here the set of triangles is in 'subfaces' which is a surface mesh //
+// of a PLC (.poly or .smesh). //
+// //
+// To detect whether two triangles are intersecting is done by the routine //
+// 'tri_tri_inter()'. The algorithm for the test is very simple and stable. //
+// It is based on geometric orientation test which uses exact arithmetics. //
+// //
+// Use divide-and-conquer algorithm for reducing the number of intersection //
+// tests. Start from the bounding box of the input point set, recursively //
+// partition the box into smaller boxes, until the number of triangles in a //
+// box is not decreased anymore. Then perform triangle-triangle tests on the //
+// remaining set of triangles. The memory allocated in the input set is //
+// freed immediately after it has been partitioned into two arrays. So it //
+// can be re-used for the consequent partitions. //
+// //
+// On return, the pool 'subfaces' will be cleared, and only the intersecting //
+// triangles remain for output (to a .face file). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::detectinterfaces()
+{
+ shellface **subfacearray;
+ face shloop;
+ int internum;
+ int i;
+
+ if (!b->quiet) {
+ printf("Detecting intersecting facets.\n");
+ }
+
+ // Construct a map from indices to subfaces;
+ subfacearray = new shellface*[subfaces->items];
+ subfaces->traversalinit();
+ shloop.sh = shellfacetraverse(subfaces);
+ i = 0;
+ while (shloop.sh != (shellface *) NULL) {
+ subfacearray[i] = shloop.sh;
+ shloop.sh = shellfacetraverse(subfaces);
+ i++;
+ }
+
+ internum = 0;
+ // Recursively split the set of triangles into two sets using a cut plane
+ // parallel to x-, or, y-, or z-axies. Stop splitting when the number
+ // of subfaces is not decreasing anymore. Do tests on the current set.
+ interecursive(subfacearray, subfaces->items, 0, xmin, xmax, ymin, ymax,
+ zmin, zmax, &internum);
+
+ if (!b->quiet) {
+ if (internum > 0) {
+ printf("\n!! Found %d pairs of faces are intersecting.\n\n", internum);
+ } else {
+ printf("\nNo faces are intersecting.\n\n");
+ }
+ }
+
+ if (internum > 0) {
+ // Traverse all subfaces, deallocate those have not been infected (they
+ // are not intersecting faces). Uninfect those have been infected.
+ // After this loop, only intersecting faces remain.
+ subfaces->traversalinit();
+ shloop.sh = shellfacetraverse(subfaces);
+ while (shloop.sh != (shellface *) NULL) {
+ if (sinfected(shloop)) {
+ suninfect(shloop);
+ } else {
+ shellfacedealloc(subfaces, shloop.sh);
+ }
+ shloop.sh = shellfacetraverse(subfaces);
+ }
+ } else {
+ // Deallocate all subfaces.
+ subfaces->restart();
+ }
+}
+
+//
+// Begin of periodic boundary condition routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// createsubpbcgrouptable() Create the 'subpbcgrouptable'. //
+// //
+// Allocate the memory for 'subpbcgrouptable'. Each entry i (a pbcdata) of //
+// the table represents a pbcgroup. Most of the fields of a group-i are set //
+// in this routine. 'fmark[0]', 'fmark[1]', and 'transmat[0]' are directly //
+// copied from the corresponding data of 'in->numberofpbcgroups'. 'transmat //
+// [1]' is calculated as the inverse matrix of 'transmat[0]'. 'ss[0]' and //
+// 'ss[1]' are initilized be 'dummysh'. They are set in 'trangulatefacet()' //
+// (when -p is in use) or 'reconstructmesh()' (when -r is in use). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::createsubpbcgrouptable()
+{
+ tetgenio::pbcgroup *pg;
+ pbcdata *pd;
+ REAL A[4][4], rhs[4], D;
+ int indx[4];
+ int i, j, k;
+
+ subpbcgrouptable = new pbcdata[in->numberofpbcgroups];
+ for (i = 0; i < in->numberofpbcgroups; i++) {
+ pg = &(in->pbcgrouplist[i]);
+ pd = &(subpbcgrouptable[i]);
+ // Copy data from pg to pd.
+ pd->fmark[0] = pg->fmark1;
+ pd->fmark[1] = pg->fmark2;
+ // Initialize array 'pd->ss'.
+ pd->ss[0].sh = dummysh;
+ pd->ss[1].sh = dummysh;
+ // Copy the transform matrix from pg to pd->transmat[0].
+ for (j = 0; j < 4; j++) {
+ for (k = 0; k < 4; k++) {
+ pd->transmat[0][j][k] = pg->transmat[j][k];
+ // Prepare for inverting the matrix.
+ A[j][k] = pg->transmat[j][k];
+ }
+ }
+ // Calculate the inverse matrix (pd->transmat[1]) of pd->transmat[0].
+ lu_decmp(A, 4, indx, &D, 0);
+ for (j = 0; j < 4; j++) {
+ for (k = 0; k < 4; k++) rhs[k] = 0.0;
+ rhs[j] = 1.0;
+ lu_solve(A, 4, indx, rhs, 0);
+ for (k = 0; k < 4; k++) pd->transmat[1][k][j] = rhs[k];
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsubpbcgroup() Get the pbcgroup of a subface. //
+// //
+// 'pbcsub' has pbc defined. Its pbcgroup is returned in 'pd'. In addition, //
+// 'f1' (0 or 1) indicates the position of 'pbcsub' in 'pd'; 'f2' (= 1 - f1) //
+// is the position where the symmetric subface of 'pbcsub' is found. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::getsubpbcgroup(face* pbcsub, pbcdata** pd, int *f1, int *f2)
+{
+ int groupid, fmark, idx;
+
+ groupid = shellpbcgroup(*pbcsub);
+ *pd = &subpbcgrouptable[groupid];
+
+ // Get the facet index (1 - based).
+ idx = shellmark(*pbcsub);
+ // Get the facet marker from array (0 - based).
+ fmark = in->facetmarkerlist[idx - 1];
+ if ((*pd)->fmark[0] == fmark) {
+ *f1 = 0;
+ } else {
+ assert((*pd)->fmark[1] == fmark);
+ *f1 = 1;
+ }
+ *f2 = 1 - (*f1);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsubpbcsympoint() Compute the symmetric point for a subface point. //
+// //
+// 'newpoint' lies on 'splitsub'. This routine calculates a 'sympoint' which //
+// locates on 'symsplitsub' and symmtric to 'newpoint'. Return the location //
+// of sympoint wrt. symsplitsub. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+getsubpbcsympoint(point newpoint, face* splitsub, point sympoint,
+ face* symsplitsub)
+{
+ pbcdata *pd;
+ face subloop;
+ enum locateresult symloc;
+ int f1, f2, i;
+
+ // Get the pbcgroup of 'splitsub'.
+ getsubpbcgroup(splitsub, &pd, &f1, &f2);
+
+ // Transform newpoint from f1 -> f2.
+ for (i = 0; i < 3; i++) {
+ sympoint[i] = pd->transmat[f1][i][0] * newpoint[0]
+ + pd->transmat[f1][i][1] * newpoint[1]
+ + pd->transmat[f1][i][2] * newpoint[2]
+ + pd->transmat[f1][i][3] * 1.0;
+ }
+ // Locate sympoint in f2.
+ symloc = OUTSIDE;
+ *symsplitsub = pd->ss[f2];
+ // Is the stored subface valid? Hole removal may delete the subface.
+ if ((symsplitsub->sh != dummysh) && !isdead(symsplitsub)) {
+ // 'symsplitsub' should lie on the symmetric facet. Check it.
+ i = shellmark(*symsplitsub);
+ if (in->facetmarkerlist[i - 1] == pd->fmark[f2]) {
+ // Locate sympoint in facet. Don't stop at subsegment.
+ symloc = locatesub(sympoint, symsplitsub, 0);
+ }
+ }
+ if (symloc == OUTSIDE) {
+ // Locate sympoint in the pool of subfaces (with fmark pd->fmark[f2]).
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ i = shellmark(subloop);
+ if (in->facetmarkerlist[i - 1] == pd->fmark[f2]) {
+ // subloop is on the facet, search sympoint.
+ symloc = locatesub(sympoint, &subloop, 0);
+ if (symloc != OUTSIDE) break;
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+ // Set the returning subface.
+ *symsplitsub = subloop;
+ // Update the stored subface for next searching.
+ pd->ss[f2] = *symsplitsub;
+ }
+ // sympoint should be inside the facet.
+ assert(symloc != OUTSIDE);
+
+ return adjustlocatesub(sympoint, symsplitsub, symloc, b->epsilon);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// createsegpbcgrouptable() Create the 'segpbcgrouptable'. //
+// //
+// Each segment may belong to more than one pbcgroups. 'segpbcgrouptable' is //
+// implemented as a list of pbcdatas. Each item i represents a pbcgroup. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::createsegpbcgrouptable()
+{
+ pbcdata *pd, *pd1, *pd2;
+ face segloop, symseg;
+ face startsh, spinsh, symsh;
+ point pa, pb;
+ enum locateresult symloc;
+ REAL testpt[3], sympt[3];
+ bool inflag;
+ int segid1, segid2;
+ int f1, f2;
+ int i, j, k, l;
+
+ // Allocate memory for 'subpbcgrouptable'.
+ segpbcgrouptable = new list(sizeof(pbcdata), NULL, 256);
+
+ // Loop through the segment list.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ // Loop the subface ring of segloop ab.
+ pa = sorg(segloop);
+ pb = sdest(segloop);
+ segid1 = shellmark(segloop);
+ spivot(segloop, startsh);
+ spinsh = startsh;
+ do {
+ // Adjust spinsh be edge ab.
+ if (sorg(spinsh) != pa) {
+ sesymself(spinsh);
+ }
+ // Does spinsh belong to a pbcgroup?
+ if (shellpbcgroup(spinsh) != -1) {
+ // Yes! There exists a segment cd. ab and cd form a pbcgroup.
+ // 'testpt' is the midpoint of ab used to find cd.
+ for (i = 0; i < 3; i++) testpt[i] = 0.5 * (pa[i] + pb[i]);
+ symloc = getsubpbcsympoint(testpt, &spinsh, sympt, &symsh);
+ assert(symloc == ONEDGE);
+ sspivot(symsh, symseg);
+ assert(symseg.sh != dummysh);
+ // Check whether this group has already been created in list.
+ segid2 = shellmark(symseg);
+ inflag = false;
+ for (i = 0; i < segpbcgrouptable->len() && !inflag; i++) {
+ pd = (pbcdata *)(* segpbcgrouptable)[i];
+ if (pd->segid[0] == segid1) {
+ if (pd->segid[1] == segid2) inflag = true;
+ } else if (pd->segid[0] == segid2) {
+ if (pd->segid[1] == segid1) inflag = true;
+ }
+ }
+ if (!inflag) {
+ // Create a segment pbcgroup in list for ab and cd.
+ pd = (pbcdata *) segpbcgrouptable->append(NULL);
+ // Save the markers of ab and cd.
+ pd->segid[0] = segid1;
+ pd->segid[1] = segid2;
+ // Save the handles of ab and cd.
+ pd->ss[0] = segloop;
+ pd->ss[1] = symseg;
+ // Find the map from ab to cd.
+ getsubpbcgroup(&spinsh, &pd1, &f1, &f2);
+ pd->fmark[0] = pd1->fmark[f1];
+ pd->fmark[1] = pd1->fmark[f2];
+ // Set the map from ab to cd.
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < 4; j++) {
+ pd->transmat[0][i][j] = pd1->transmat[f1][i][j];
+ }
+ }
+ // Set the map from cd to ab.
+ for (i = 0; i < 4; i++) {
+ for (j = 0; j < 4; j++) {
+ pd->transmat[1][i][j] = pd1->transmat[f2][i][j];
+ }
+ }
+ }
+ }
+ // Go to the next subface in the ring of ab.
+ spivotself(spinsh);
+ } while (spinsh.sh != startsh.sh);
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+
+ // Create the indirect segment pbcgroups.
+ for (i = 0; i < segpbcgrouptable->len(); i++) {
+ pd1 = (pbcdata *)(* segpbcgrouptable)[i];
+ for (f1 = 0; f1 < 2; f1++) {
+ // Search for a group (except i) contains pd1->segid[f1].
+ for (j = 0; j < segpbcgrouptable->len(); j++) {
+ if (j == i) continue;
+ pd2 = (pbcdata *)(* segpbcgrouptable)[j];
+ f2 = -1;
+ if (pd1->segid[f1] == pd2->segid[0]) {
+ f2 = 0;
+ } else if (pd1->segid[f1] == pd2->segid[1]) {
+ f2 = 1;
+ }
+ if (f2 != -1) {
+ assert(pd1->segid[f1] == pd2->segid[f2]);
+ segid1 = pd1->segid[1 - f1];
+ segid2 = pd2->segid[1 - f2];
+ // Search for the existence of segment pbcgroup (segid1, segid2).
+ inflag = false;
+ for (k = 0; k < segpbcgrouptable->len() && !inflag; k++) {
+ pd = (pbcdata *)(* segpbcgrouptable)[k];
+ if (pd->segid[0] == segid1) {
+ if (pd->segid[1] == segid2) inflag = true;
+ } else if (pd->segid[0] == segid2) {
+ if (pd->segid[1] == segid1) inflag = true;
+ }
+ }
+ if (!inflag) {
+ pd = (pbcdata *) segpbcgrouptable->append(NULL);
+ pd->segid[0] = pd1->segid[1 - f1];
+ pd->segid[1] = pd2->segid[1 - f2];
+ pd->ss[0] = pd1->ss[1 - f1];
+ pd->ss[1] = pd2->ss[1 - f2];
+ // Invalid the fmark[0] == fmark[1].
+ pd->fmark[0] = pd->fmark[1] = 0;
+ // Translate matrix pd->transmat[0] = m2 * m1, where m1 =
+ // pd1->transmat[1 - f1], m2 = pd2->transmat[f2].
+ for (k = 0; k < 4; k++) {
+ for (l = 0; l < 4; l++) {
+ pd->transmat[0][k][l] = pd2->transmat[f2][k][l];
+ }
+ }
+ m4xm4(pd->transmat[0], pd1->transmat[1 - f1]);
+ // Translate matrix pd->transmat[1] = m4 * m3, where m3 =
+ // pd2->transmat[1 - f2], m4 = pd1->transmat[f1].
+ for (k = 0; k < 4; k++) {
+ for (l = 0; l < 4; l++) {
+ pd->transmat[1][k][l] = pd1->transmat[f1][k][l];
+ }
+ }
+ m4xm4(pd->transmat[1], pd2->transmat[1 - f2]);
+ }
+ }
+ }
+ }
+ }
+
+ // Form a map from segment index to pbcgroup list of this segment.
+ idx2segpglist = new int[subsegs->items + 1];
+ for (i = 0; i < subsegs->items + 1; i++) idx2segpglist[i] = 0;
+ // Loop through 'segpbcgrouptable', counter the number of pbcgroups of
+ // each segment.
+ for (i = 0; i < segpbcgrouptable->len(); i++) {
+ pd = (pbcdata *)(* segpbcgrouptable)[i];
+ for (j = 0; j < 2; j++) {
+ k = pd->segid[j] - 1;
+ idx2segpglist[k]++;
+ }
+ }
+ // Calculate the total length of array 'segpglist'.
+ j = idx2segpglist[0];
+ idx2segpglist[0] = 0; // Array starts from 0 element.
+ for (i = 0; i < subsegs->items; i++) {
+ k = idx2segpglist[i + 1];
+ idx2segpglist[i + 1] = idx2segpglist[i] + j;
+ j = k;
+ }
+ // The total length is in the last unit of idx2segpglist.
+ segpglist = new int[idx2segpglist[i]];
+ // Loop the set of pbcgroups again, set the data into segpglist.
+ for (i = 0; i < segpbcgrouptable->len(); i++) {
+ pd = (pbcdata *)(* segpbcgrouptable)[i];
+ for (j = 0; j < 2; j++) {
+ k = pd->segid[j] - 1;
+ segpglist[idx2segpglist[k]] = i;
+ idx2segpglist[k]++;
+ }
+ }
+ // Contents in 'idx2segpglist' are shifted, now shift them back.
+ for (i = subsegs->items - 1; i >= 0; i--) {
+ idx2segpglist[i + 1] = idx2segpglist[i];
+ }
+ idx2segpglist[0] = 0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// locateseg() Find a point in subsegments. //
+// //
+// Searching begins from the input 'searchseg', it should be a subsegment of //
+// the whole segment. //
+// //
+// On completion, 'searchseg' is a subsegment that contains 'searchpt'. //
+// - Returns ONVERTEX if the point lies on an existing vertex. 'searchseg' //
+// is a handle whose origin is the existing vertex. //
+// - Returns ONEDGE if the point lies inside 'searchseg'. //
+// - Returns OUTSIDE if the point lies outside the segment. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+locateseg(point searchpt, face* searchseg)
+{
+ face backtraceseg;
+ point pa, pb;
+ int moveleft;
+ int i;
+
+ while (1) {
+ searchseg->shver = 0;
+ pa = sorg(*searchseg);
+ pb = sdest(*searchseg);
+ for (i = 0; i < 3; i++) {
+ if (pa[i] < pb[i]) {
+ if (searchpt[i] < pa[i]) {
+ moveleft = 1;
+ break;
+ } else if (searchpt[i] > pa[i]) {
+ if (searchpt[i] < pb[i]) {
+ return ONEDGE;
+ } else if (searchpt[i] > pb[i]) {
+ moveleft = 0;
+ break;
+ } else {
+ assert(searchpt[i] == pb[i]);
+ sesymself(*searchseg);
+ return ONVERTEX;
+ }
+ } else {
+ assert(searchpt[i] == pa[i]);
+ return ONVERTEX;
+ }
+ } else if (pa[i] > pb[i]) {
+ if (searchpt[i] < pb[i]) {
+ moveleft = 0;
+ break;
+ } else if (searchpt[i] > pb[i]) {
+ if (searchpt[i] < pa[i]) {
+ return ONEDGE;
+ } else if (searchpt[i] > pa[i]) {
+ moveleft = 1;
+ break;
+ } else {
+ assert(searchpt[i] == pa[i]);
+ return ONVERTEX;
+ }
+ } else {
+ assert(searchpt[i] == pb[i]);
+ sesymself(*searchseg);
+ return ONVERTEX;
+ }
+ }
+ }
+ assert(i < 3);
+ backtraceseg = *searchseg;
+ if (moveleft) {
+ senext2self(*searchseg);
+ } else {
+ senextself(*searchseg);
+ }
+ spivotself(*searchseg);
+ if (searchseg->sh == dummysh) {
+ *searchseg = backtraceseg;
+ break;
+ }
+ }
+
+ return OUTSIDE;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// adjustlocateseg() Adjust the precise location of a vertex on segment. //
+// //
+// 'searchpt' is either inside or ouside the segment 'searchseg'. It will be //
+// adjusted to on vertex if it is very close to an endpoint of 'searchseg'. //
+// 'epspp' is the given relative tolerance. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+adjustlocateseg(point searchpt, face* searchseg, enum locateresult precise,
+ REAL epspp)
+{
+ point pa, pb;
+ REAL L, d, r;
+
+ pa = sorg(*searchseg);
+ pb = sdest(*searchseg);
+ L = distance(pa, pb);
+
+ // Is searchpt approximate to pa?
+ d = distance(pa, searchpt);
+ r = d / L;
+ if (r <= epspp) {
+ return ONVERTEX;
+ }
+ // Is searchpt approximate to pb?
+ d = distance(pb, searchpt);
+ r = d / L;
+ if (r <= epspp) {
+ sesymself(*searchseg);
+ return ONVERTEX;
+ }
+
+ return precise;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsegpbcsympoint() Compute the symmetric point for a segment point. //
+// //
+// 'newpoint' lies on 'splitseg'. This routine calculates a 'sympoint' which //
+// locates on 'symsplitseg' and symmtric to 'newpoint'. Return the location //
+// of sympoint wrt. symsplitseg. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::locateresult tetgenmesh::
+getsegpbcsympoint(point newpoint, face* splitseg, point sympoint,
+ face* symsplitseg, int groupid)
+{
+ pbcdata *pd;
+ enum locateresult symloc;
+ int segid, f1, f2, i;
+
+ pd = (pbcdata *)(* segpbcgrouptable)[groupid];
+ segid = shellmark(*splitseg);
+ if (pd->segid[0] == segid) {
+ f1 = 0;
+ } else {
+ assert(pd->segid[1] == segid);
+ f1 = 1;
+ }
+ f2 = 1 - f1;
+
+ // Transform newpoint from f1 -> f2.
+ for (i = 0; i < 3; i++) {
+ sympoint[i] = pd->transmat[f1][i][0] * newpoint[0]
+ + pd->transmat[f1][i][1] * newpoint[1]
+ + pd->transmat[f1][i][2] * newpoint[2]
+ + pd->transmat[f1][i][3] * 1.0;
+ }
+ // Locate sympoint in f2.
+ *symsplitseg = pd->ss[f2];
+ assert(symsplitseg->sh != dummysh);
+ // Locate sympoint in facet. Stop at subsegment.
+ symloc = locateseg(sympoint, symsplitseg);
+
+ return adjustlocateseg(sympoint, symsplitseg, symloc, b->epsilon);
+}
+
+//
+// End of periodic boundary condition routines
+//
+
+//
+// Begin of vertex perturbation routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// randgenerator() Generate a random REAL number between (0, |range|). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+REAL tetgenmesh::randgenerator(REAL range)
+{
+ REAL worknumber, result;
+ int expo;
+
+ if (range == 0.0) return 0.0;
+
+ expo = 0;
+ worknumber = fabs(range);
+ // Normalize worknumber (i.e., 1.xxxExx)
+ if (worknumber > 10.0) {
+ while (worknumber > 10.0) {
+ worknumber /= 10.0;
+ expo++;
+ }
+ } else if (worknumber < 1.0) {
+ while (worknumber < 1.0) {
+ worknumber *= 10.0;
+ expo--;
+ }
+ }
+ assert(worknumber >= 1.0 && worknumber <= 10.0);
+
+ // Enlarge worknumber 1000 times.
+ worknumber *= 1e+3;
+ expo -= 3;
+ // Generate a randome number between (0, worknumber).
+ result = (double) randomnation((int) worknumber);
+
+ // Scale result back into the original size.
+ if (expo > 0) {
+ while (expo != 0) {
+ result *= 10.0;
+ expo--;
+ }
+ } else if (expo < 0) {
+ while (expo != 0) {
+ result /= 10.0;
+ expo++;
+ }
+ }
+ assert((result >= 0.0) && (result <= fabs(range)));
+
+ return result;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checksub4cocir() Test a subface to find co-circular pair of subfaces. //
+// //
+// 'eps' is a relative tolerance for testing approximately cospherical case. //
+// Set it to zero if only exact test is desired. //
+// //
+// An edge(not a segment) of 'testsub' is locally degenerate if the opposite //
+// vertex of the adjacent subface is cocircular with the vertices of testsub.//
+// If 'once' is TRUE, operate on the edge only if the pointer 'testsub->sh' //
+// is smaller than its neighbor (for each edge is considered only once). //
+// //
+// Return TRUE if find an edge of testsub is locally degenerate. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+checksub4cocir(face* testsub, REAL eps, bool once, bool enqflag)
+{
+ badface *cocirsub;
+ face subloop, neighsub;
+ face checkseg;
+ point pa, pb, pc, pd;
+ point liftpt;
+ REAL sign;
+ int i;
+
+ subloop = *testsub;
+ // Get the liftpoint.
+ liftpt = getliftpoint(shellmark(subloop));
+ subloop.shver = 0; // Keep the CCW orientation.
+ // Check the three edges of subloop.
+ for (i = 0; i < 3; i++) {
+ sspivot(subloop, checkseg);
+ if (checkseg.sh == dummysh) {
+ // It is not a segment, get the adjacent subface.
+ spivot(subloop, neighsub);
+ assert(neighsub.sh != dummysh);
+ if (!once || (once && (neighsub.sh > subloop.sh))) {
+ pa = sorg(subloop);
+ pb = sdest(subloop);
+ pc = sapex(subloop);
+ pd = sapex(neighsub);
+ sign = insphere(pa, pb, pc, liftpt, pd);
+ if ((sign != 0.0) && (eps > 0.0)) {
+ if (iscospheric(pa, pb, pc, liftpt, pd, sign, eps)) sign = 0.0;
+ }
+ if (sign == 0.0) {
+ // It's locally degenerate!
+ if (enqflag && badsubfaces != (memorypool *) NULL) {
+ // Save it.
+ cocirsub = (badface *) badsubfaces->alloc();
+ cocirsub->ss = subloop;
+ cocirsub->forg = pa;
+ cocirsub->fdest = pb;
+ cocirsub->fapex = pc;
+ cocirsub->foppo = pd;
+ setshell2badface(cocirsub->ss, cocirsub);
+ }
+ if (b->verbose > 1) {
+ printf(" Found set (%d, %d, %d, %d).\n", pointmark(pa),
+ pointmark(pb), pointmark(pc), pointmark(pd));
+ }
+ return true;
+ }
+ }
+ }
+ senextself(subloop);
+ }
+
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checktet4cosph() Test a tetrahedron to find co-spherical pair of tets. //
+// //
+// 'eps' is a relative tolerance for testing approximately cospherical case. //
+// Set it to zero if only exact test is desired. //
+// //
+// A face of 'testtet' is locally degenerate if the opposite vertex of the //
+// adjacent tetrahedron is co-sphere with the vertices of testtet. If 'once' //
+// is TRUE operate on the face only if the pointer 'testtet->tet' is smaller //
+// than its neighbor (for each face is considered only once). //
+// //
+// Return TRUE if find a face of testtet is locally degenerate. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+checktet4cosph(triface* testtet, REAL eps, bool once, bool enqflag)
+{
+ badface *cosphtet;
+ triface tetloop, neightet;
+ point pa, pb, pc, pd, pe;
+ REAL sign;
+
+ tetloop = *testtet;
+ tetloop.ver = 0; // Keep the CCW orientation in each face.
+ for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
+ sym(tetloop, neightet);
+ if (neightet.tet != dummytet) {
+ // It is not a hull face.
+ if (!once || (once && (tetloop.tet < neightet.tet))) {
+ pa = org(tetloop);
+ pb = dest(tetloop);
+ pc = apex(tetloop);
+ pd = oppo(tetloop);
+ pe = oppo(neightet);
+ sign = insphere(pa, pb, pc, pd, pe);
+ // Approximate sign.
+ if (eps > 0.0) {
+ if (iscospheric(pa, pb, pc, pd, pe, sign, eps)) sign = 0.0;
+ }
+ if (sign == 0.0) {
+ // It's degenerate!
+ if (enqflag && (badtetrahedrons != (memorypool *) NULL)) {
+ cosphtet = (badface *) badtetrahedrons->alloc();
+ cosphtet->tt = tetloop;
+ cosphtet->forg = pa;
+ cosphtet->fdest = pb;
+ cosphtet->fapex = pc;
+ cosphtet->foppo = pd;
+ cosphtet->noppo = pe;
+ }
+ if (b->verbose > 1) {
+ printf(" Found set (%d, %d, %d, %d, %d).\n", pointmark(pa),
+ pointmark(pb), pointmark(pc), pointmark(pd), pointmark(pe));
+ }
+ return true;
+ }
+ }
+ }
+ }
+
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallcocirsubs() Find all co-circular subfaces and save them in list. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallcocirsubs(REAL eps, bool enqflag)
+{
+ face subloop;
+
+ // Loop over all subfaces.
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ checksub4cocir(&subloop, eps, true, enqflag);
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallcosphtets() Find all co-spherical tets and save them in list. //
+// //
+// If 'testtetlist' is not NULL, only test the tetrahedra saved in the list. //
+// Otherwise, test all tetrahedra of current mesh. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallcosphtets(list* testtetlist, REAL eps, bool enqflag)
+{
+ triface tetloop;
+ int i;
+
+ if (testtetlist != (list *) NULL) {
+ for (i = 0; i < testtetlist->len(); i++) {
+ tetloop = * (triface *)(* testtetlist)[i];
+ checktet4cosph(&tetloop, eps, false, enqflag);
+ }
+ } else {
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ checktet4cosph(&tetloop, eps, true, enqflag);
+ tetloop.tet = tetrahedrontraverse();
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallencsegsfsubs() Check for encroached segs from a list of subfaces. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::tallencsegsfsubs(point testpt, list* cavsublist)
+{
+ face startsub, checkseg;
+ long oldencnum;
+ int i, j;
+
+ // Remember the current number of encroached segments.
+ oldencnum = badsubsegs->items;
+
+ // Check segments in the list of subfaces.
+ for (i = 0; i < cavsublist->len(); i++) {
+ startsub = * (face *)(* cavsublist)[i];
+ // Test all three edges of startsub.
+ for (j = 0; j < 3; j++) {
+ sspivot(startsub, checkseg);
+ if (checkseg.sh != dummysh) {
+ if (!shell2badface(checkseg)) {
+ checkseg4encroach(&checkseg, testpt, NULL, true);
+ }
+ }
+ senextself(startsub);
+ }
+ }
+
+ return (badsubsegs->items > oldencnum);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallencsubsfsubs() Check for encroached subs from a list of subfaces. //
+// //
+// 'cavtetlist' is a list of tetrahedra whose circumspheres include 'testpt'.//
+// By the time this routine is called, there is still no connection between //
+// tetrahedra and subfaces. We have to find out the subfaces related to the //
+// list of tetrahedra. Here the trick is to mark all vertices of the tets, //
+// then loop in the pool of subfaces, for each subface, only do test if at //
+// least one of its three vertices are marked. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::tallencsubsfsubs(point testpt, list* cavtetlist)
+{
+ triface *cavtet;
+ face checksh;
+ point pt;
+ long oldencnum;
+ int *worklist;
+ int mcount;
+ int i, j;
+
+ // Initialize a worklist for vertices markers.
+ worklist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) worklist[i] = 0;
+
+ // Loop through the list of tets.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ cavtet = (triface *)(* cavtetlist)[i];
+ // Mark vertices of cavtet. Some vertices may be marked more than once,
+ // but do not matter.
+ for (j = 0; j < 4; j++) {
+ pt = (point) cavtet->tet[4 + j];
+ worklist[pointmark(pt)] = 1;
+ }
+ }
+
+ // Remember the current number of encroached segments.
+ oldencnum = badsubsegs->items;
+
+ // Check the entire list of subfaces.
+ subfaces->traversalinit();
+ checksh.sh = shellfacetraverse(subfaces);
+ while (checksh.sh != (shellface *) NULL) {
+ // Find out how many vertices of cehcksh are marked.
+ mcount = 0;
+ for (i = 0; i < 3; i++) {
+ pt = (point) checksh.sh[3 + i];
+ mcount += worklist[pointmark(pt)];
+ }
+ // If all three vertcies are marked, test it.
+ if (mcount >= 1) {
+ checksub4encroach(&checksh, testpt, true);
+ }
+ checksh.sh = shellfacetraverse(subfaces);
+ }
+
+ delete [] worklist;
+ return (badsubfaces->items > oldencnum);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// collectflipedges() Collect edges of split subfaces for flip checking. //
+// //
+// 'inspoint' is a newly inserted segment point (inserted by insertsite()). //
+// 'splitseg' is one of the two split subsegments. Some subfaces may be non- //
+// Delaunay since they're still not bonded to CDT. This routine collect all //
+// such possible subfaces in 'flipqueue'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+collectflipedges(point inspoint, face* splitseg, queue* flipqueue)
+{
+ face startsh, spinsh, checksh;
+ face nextseg;
+ point pa, pb;
+
+ // Let the dest of splitseg be inspoint.
+ splitseg->shver = 0;
+ if (sdest(*splitseg) != inspoint) {
+ sesymself(*splitseg);
+ }
+ assert(sdest(*splitseg) == inspoint);
+ pa = sorg(*splitseg);
+ spivot(*splitseg, startsh);
+ spinsh = startsh;
+ do {
+ findedge(&spinsh, pa, inspoint);
+ senext2(spinsh, checksh);
+ enqueueflipedge(checksh, flipqueue);
+ spivotself(spinsh);
+ } while (spinsh.sh != startsh.sh);
+
+ // Get the next subsegment.
+ senext(*splitseg, nextseg);
+ spivotself(nextseg);
+ assert(nextseg.sh != (shellface *) NULL);
+
+ // Let the org of nextseg be inspoint.
+ nextseg.shver = 0;
+ if (sorg(nextseg) != inspoint) {
+ sesymself(nextseg);
+ }
+ assert(sorg(nextseg) == inspoint);
+ pb = sdest(nextseg);
+ spivot(nextseg, startsh);
+ spinsh = startsh;
+ do {
+ findedge(&spinsh, inspoint, pb);
+ senext(spinsh, checksh);
+ enqueueflipedge(checksh, flipqueue);
+ spivotself(spinsh);
+ } while (spinsh.sh != startsh.sh);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// perturbrepairencsegs() Repair all encroached segments. //
+// //
+// All encroached segments are stored in 'badsubsegs'. Each segment will be //
+// split by adding a perturbed point near its circumcenter. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::perturbrepairencsegs(queue* flipqueue)
+{
+ badface *encloop;
+ tetrahedron encodedtet;
+ triface splittet;
+ face splitsub, symsplitsub;
+ face splitseg, symsplitseg;
+ point newpoint, sympoint;
+ point pa, pb, pc;
+ enum insertsiteresult success;
+ enum locateresult loc, symloc;
+ REAL cent[3], d1, ps, rs;
+ int i, j;
+
+ // Note that steinerleft == -1 if an unlimited number of Steiner points
+ // is allowed. Loop until 'badsubsegs' is empty.
+ badsubsegs->traversalinit();
+ encloop = badfacetraverse(badsubsegs);
+ while ((encloop != (badface *) NULL) && (steinerleft != 0)) {
+ splitseg = encloop->ss;
+ assert(shell2badface(splitseg) == encloop);
+ setshell2badface(splitseg, NULL);
+ pa = sorg(splitseg);
+ pb = sdest(splitseg);
+ if ((pa == encloop->forg) && (pb == encloop->fdest)) {
+ if (b->verbose > 1) {
+ printf(" Get seg (%d, %d).\n", pointmark(pa), pointmark(pb));
+ }
+ // Create the newpoint.
+ makepoint(&newpoint);
+ // Get the circumcenter and radius of ab.
+ for (i = 0; i < 3; i++) cent[i] = 0.5 * (pa[i] + pb[i]);
+ d1 = 0.5 * distance(pa, pb);
+ // Add a random perturbation to newpoint along the vector ab.
+ ps = randgenerator(d1 * 1.0e-3);
+ rs = ps / d1;
+ // Set newpoint (be at the perturbed circumcenter of ab).
+ for (i = 0; i < 3; i++) newpoint[i] = cent[i] + rs * (cent[i] - pa[i]);
+ setpointtype(newpoint, FREESEGVERTEX);
+ // Set splitseg into the newpoint.
+ // setpoint2sh(newpoint, sencode(splitseg));
+
+ // Is there periodic boundary condition?
+ if (checkpbcs) {
+ // Insert points on other segments of incident pbcgroups.
+ i = shellmark(splitseg) - 1;
+ for (j = idx2segpglist[i]; j < idx2segpglist[i + 1]; j++) {
+ makepoint(&sympoint);
+ symloc = getsegpbcsympoint(newpoint, &splitseg, sympoint,
+ &symsplitseg, segpglist[j]);
+ assert(symloc != OUTSIDE);
+ if (symloc == ONEDGE) {
+ assert(symsplitseg.sh != dummysh);
+ setpointtype(sympoint, FREESEGVERTEX);
+ // setpoint2sh(sympoint, sencode(symsplitseg));
+ // Insert sympoint into DT.
+ pc = sorg(symsplitseg);
+ splittet.tet = dummytet;
+ // Find a good start point to search.
+ encodedtet = point2tet(pc);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ // Locate sympoint in DT. Do exact location.
+ success = insertsite(sympoint, &splittet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ inserthullsite(sympoint, &splittet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Let sympoint remember splittet.
+ setpoint2tet(sympoint, encode(splittet));
+ // Do flip in DT.
+ flip(flipqueue, NULL, false, false, false);
+ // Insert sympoint into F.
+ symloc = locateseg(sympoint, &symsplitseg);
+ if (symloc == ONEDGE) {
+ symsplitseg.shver = 0;
+ spivot(symsplitseg, symsplitsub);
+ // sympoint should on the edge of symsplitsub.
+ splitsubedge(sympoint, &symsplitsub, flipqueue);
+ } else {
+ // insertsite() has done the whole job.
+ assert(symloc == ONVERTEX);
+ assert(checksubfaces);
+ // Some edges may need to be flipped.
+ collectflipedges(sympoint, &symsplitseg, flipqueue);
+ }
+ // Do flip in facet.
+ flipsub(flipqueue);
+ } else if (symloc == ONVERTEX) {
+ // The symmtric point already exists. It is possible when two
+ // pbc group are idebtical. Omit sympoint.
+ pointdealloc(sympoint);
+ }
+ }
+ }
+
+ // Insert newpoint into DT.
+ splittet.tet = dummytet;
+ // Find a good start point to search.
+ encodedtet = point2tet(pa);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ if (splittet.tet == dummytet) { // Try pb.
+ encodedtet = point2tet(pb);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ }
+ // Locate the newpoint in DT. Do exact location.
+ success = insertsite(newpoint, &splittet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ // A convex hull edge is mssing, and the inserting point lies
+ // (slightly) outside the convex hull due to the significant
+ // digits lost in the calculation. Enlarge the convex hull.
+ inserthullsite(newpoint, &splittet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Let newpoint remember splittet.
+ setpoint2tet(newpoint, encode(splittet));
+ // Do flip in DT.
+ flip(flipqueue, NULL, false, false, false);
+ // Insert newpoint into F.
+ loc = locateseg(newpoint, &splitseg);
+ if (loc == ONEDGE) {
+ splitseg.shver = 0;
+ spivot(splitseg, splitsub);
+ // newpoint should on the edge of splitsub.
+ splitsubedge(newpoint, &splitsub, flipqueue);
+ } else {
+ // insertsite() has done the whole job.
+ assert(loc == ONVERTEX);
+ assert(checksubfaces);
+ // Some edges may need to be flipped.
+ collectflipedges(newpoint, &splitseg, flipqueue);
+ }
+ // Do flip in facet.
+ flipsub(flipqueue);
+ }
+ // Remove this entry from list.
+ badfacedealloc(badsubsegs, encloop);
+ // Get the next encroached segments.
+ encloop = badfacetraverse(badsubsegs);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// perturbrepairencsubs() Repair all encroached subfaces. //
+// //
+// All encroached subfaces are stored in 'badsubfaces'. Each subface will be //
+// split by adding a perturbed point near its circumcenter. However, if the //
+// point encroaches some segments, it will not be inserted. Instead, the //
+// encroached segments are split. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+perturbrepairencsubs(REAL eps, list* cavsublist, queue* flipqueue)
+{
+ badface *encloop, *encsubseg;
+ tetrahedron encodedtet;
+ triface splittet;
+ face splitsub, symsplitsub;
+ face checkseg, symsplitseg;
+ point newpoint, sympoint;
+ point pa, pb, pc, pd;
+ enum insertsiteresult success;
+ enum locateresult loc, symloc;
+ REAL cent[3], d1, ps, rs;
+ bool reject;
+ int i;
+
+ // Note that steinerleft == -1 if an unlimited number of Steiner points
+ // is allowed. Loop until the list 'badsubfaces' is empty.
+ while ((badsubfaces->items > 0) && (steinerleft != 0)) {
+ badsubfaces->traversalinit();
+ encloop = badfacetraverse(badsubfaces);
+ while ((encloop != (badface *) NULL) && (steinerleft != 0)) {
+ splitsub = encloop->ss;
+ assert(shell2badface(splitsub) == encloop);
+ setshell2badface(splitsub, NULL);
+ pa = sorg(splitsub);
+ pb = sdest(splitsub);
+ pc = sapex(splitsub);
+ // The subface may be not the same one when it was determined to be
+ // encroached. If its adjacent encroached subface was split, the
+ // consequent flips may change it into another subface.
+ if ((pa == encloop->forg) && (pb == encloop->fdest) &&
+ (pc == encloop->fapex)) {
+ if (b->verbose > 1) {
+ printf(" Get subface (%d, %d, %d).\n", pointmark(pa),
+ pointmark(pb), pointmark(pc));
+ }
+ // Create the newpoint.
+ makepoint(&newpoint);
+ // Get the circumcenter of abc.
+ circumsphere(pa, pb, pc, NULL, cent, &d1);
+ assert(d1 > 0.0);
+ // Add a random perturbation to newpoint along the vector a->cent.
+ // This way, the perturbed point still lies in the plane of abc.
+ ps = randgenerator(d1 * 1.0e-3);
+ rs = ps / d1;
+ // Set newpoint (be at the perturbed circumcenter of abc).
+ for (i = 0; i < 3; i++) newpoint[i] = cent[i] + rs * (cent[i] - pa[i]);
+ // Locate newpoint in facet. Stop at subsegment.
+ loc = locatesub(newpoint, &splitsub, 1);
+ assert(loc != ONVERTEX);
+ if (loc != OUTSIDE) {
+ // Add 'splitsub' into 'cavsublist'.
+ cavsublist->append(&splitsub);
+ // Collect all subfaces that encroached by newpoint.
+ collectcavsubs(newpoint, cavsublist);
+ // Find if there are encroached segments.
+ reject = tallencsegsfsubs(newpoint, cavsublist);
+ // Clear cavsublist for the next use.
+ cavsublist->clear();
+ } else {
+ // newpoint lies outside. splitsub contains the boundary segment.
+ sspivot(splitsub, checkseg);
+ assert(checkseg.sh != dummysh);
+ // Add this segment into list for splitting.
+ if (b->verbose > 2) {
+ printf(" Queuing boundary segment (%d, %d).\n",
+ pointmark(sorg(checkseg)), pointmark(sdest(checkseg)));
+ }
+ encsubseg = (badface *) badsubsegs->alloc();
+ encsubseg->ss = checkseg;
+ encsubseg->forg = sorg(checkseg);
+ encsubseg->fdest = sdest(checkseg);
+ encsubseg->foppo = (point) NULL;
+ setshell2badface(encsubseg->ss, encsubseg);
+ // Reject newpoint.
+ reject = true;
+ }
+
+ if (!reject) {
+ // newpoint is going to be inserted.
+
+ // Is there periodic boundary condition?
+ if (checkpbcs) {
+ if (shellpbcgroup(splitsub) >= 0) {
+ // Insert a point on another facet of the pbcgroup.
+ makepoint(&sympoint);
+ symloc = getsubpbcsympoint(newpoint, &splitsub, sympoint,
+ &symsplitsub);
+ assert(symloc != ONVERTEX);
+ setpoint2pbcpt(newpoint, sympoint);
+ setpoint2pbcpt(sympoint, newpoint);
+ setpointtype(sympoint, FREESUBVERTEX);
+ // setpoint2sh(sympoint, sencode(symsplitsub));
+ // Insert sympoint into DT.
+ pd = sorg(symsplitsub);
+ splittet.tet = dummytet;
+ // Find a good start point to search.
+ encodedtet = point2tet(pd);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ // Locate sympoint in DT. Do exact location.
+ success = insertsite(sympoint, &splittet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ inserthullsite(sympoint, &splittet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Let sympoint remember splittet.
+ setpoint2tet(sympoint, encode(splittet));
+ // Do flip in DT.
+ flip(flipqueue, NULL, false, false, false);
+ // Insert sympoint into F.
+ symloc = locatesub(sympoint, &symsplitsub, 1);
+ if (symloc == ONFACE) {
+ splitsubface(sympoint, &symsplitsub, flipqueue);
+ } else if (symloc == ONEDGE) {
+ splitsubedge(sympoint, &symsplitsub, flipqueue);
+ } else {
+ // 'insertsite()' has done the whole job.
+ assert(symloc == ONVERTEX);
+ assert(checksubfaces);
+ // Split subfaces have been flipped.
+ flipqueue->clear();
+ }
+ // Do flip in facet.
+ flipsub(flipqueue);
+ }
+ }
+
+ // Insert newpoint into DT.
+ splittet.tet = dummytet;
+ // Find a good start point to search.
+ encodedtet = point2tet(pa);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ if (splittet.tet == dummytet) { // Try pb.
+ encodedtet = point2tet(pb);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ }
+ // Locate the newpoint in DT. Do exact location.
+ success = insertsite(newpoint, &splittet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ inserthullsite(newpoint, &splittet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Let newpoint remember splittet.
+ setpoint2tet(newpoint, encode(splittet));
+ // Do flip in DT.
+ flip(flipqueue, NULL, false, false, false);
+ // Insert newpoint into F.
+ loc = locatesub(newpoint, &splitsub, 1);
+ if (loc == ONFACE) {
+ // Insert the newpoint in facet.
+ splitsubface(newpoint, &splitsub, flipqueue);
+ } else if (loc == ONEDGE) {
+ // Insert the newpoint in facet.
+ splitsubedge(newpoint, &splitsub, flipqueue);
+ } else {
+ // 'insertsite()' has done the whole job.
+ assert(loc == ONVERTEX);
+ assert(checksubfaces);
+ // Split subfaces have been flipped.
+ flipqueue->clear();
+ }
+ // Set the type of the newpoint.
+ setpointtype(newpoint, FREESUBVERTEX);
+ // Set splitsub into the newpoint.
+ // setpoint2sh(newpoint, sencode(splitsub));
+ // Do flip in facet.
+ flipsub(flipqueue);
+
+ // Remove this entry from list.
+ badfacedealloc(badsubfaces, encloop);
+ } else {
+ // newpoint is rejected. Remove it from points.
+ pointdealloc(newpoint);
+ // Repair all encroached segments.
+ perturbrepairencsegs(flipqueue);
+ // Do not remove 'encloop'. Later it will be tested again.
+ setshell2badface(encloop->ss, encloop);
+ }
+ } else {
+ // This subface has been changed. Remove this entry from list.
+ badfacedealloc(badsubfaces, encloop);
+ // It may be co-circular with its neighbors.
+ checksub4cocir(&splitsub, eps, false, true);
+ }
+ // Get the next encroached subfaces.
+ encloop = badfacetraverse(badsubfaces);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// perturbrepairbadtets() Repair all bad tetrahedra. //
+// //
+// Bad tetrahedra are saved in 'badtetrahedrons'. Each bad tetrahedron will //
+// be split by inserting a perturbed point near its circumcenter. However, //
+// if the point encroaches upon some subfaces, it is rejected. Instead, all //
+// encroached subfaces are split. //
+// //
+// 'eps', and 'cavsublist' are not used in this routine, they are passed to //
+// 'perturbrepairencsubs()'. 'cavtetlist' is re-used in 'collectcavtets()'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+perturbrepairbadtets(REAL eps, list* cavsublist, list* cavtetlist,
+ queue* flipqueue)
+{
+ badface *tetloop;
+ triface splittet, neightet;
+ point pa, pb, pc, pd, pe;
+ point newpoint;
+ enum insertsiteresult success;
+ enum locateresult loc;
+ REAL cent[3], d1, ps, rs;
+ REAL vol1, vol2, vol3;
+ REAL ori1, ori2, ori3, epspp;
+ bool reject;
+ int zerocount, restart;
+ int i;
+
+ while ((badtetrahedrons->items > 0) && (steinerleft != 0)) {
+ badtetrahedrons->traversalinit();
+ tetloop = badfacetraverse(badtetrahedrons);
+ while ((tetloop != (badface *) NULL) && (steinerleft != 0)) {
+ splittet = tetloop->tt;
+ if (!isdead(&splittet)) {
+ pa = org(splittet);
+ pb = dest(splittet);
+ pc = apex(splittet);
+ pd = oppo(splittet);
+ sym(splittet, neightet);
+ if (neightet.tet != dummytet) {
+ pe = oppo(neightet);
+ } else {
+ pe = (point) NULL;
+ }
+ } else {
+ pa = (point) NULL;
+ }
+ // Make sure that 'splitet' is still the same one when it was tested.
+ // Subsequent transformations may have made it a different tet.
+ if ((pa == tetloop->forg) && (pb == tetloop->fdest) &&
+ (pc == tetloop->fapex) && (pd == tetloop->foppo) &&
+ (pe == tetloop->noppo)) {
+ if (b->verbose > 1) {
+ printf(" Get deg-tets (%d, %d, %d, %d, %d).\n", pointmark(pa),
+ pointmark(pb), pointmark(pc), pointmark(pd), pointmark(pe));
+ }
+ // Find out if there are four coplanar points. Since abc is the
+ // common face of the two tets. It should not be coplanar with e
+ // (at it's opposite). We test the other three faces of abcd
+ // to see if they are coplanar with e.
+ vol1 = orient3d(pa, pb, pd, pe);
+ vol2 = orient3d(pb, pc, pd, pe);
+ vol3 = orient3d(pc, pa, pd, pe);
+ epspp = b->epsilon * 1e+2;
+ restart = 0;
+ while (restart < 32) {
+ zerocount = 0;
+ ori1 = vol1;
+ if (ori1 != 0.0) {
+ if (iscoplanar(pa, pb, pd, pe, ori1, epspp)) ori1 = 0.0;
+ }
+ ori2 = vol2;
+ if (ori2 != 0.0) {
+ if (iscoplanar(pb, pc, pd, pe, ori2, epspp)) ori2 = 0.0;
+ }
+ ori3 = vol3;
+ if (ori3 != 0.0) {
+ if (iscoplanar(pc, pa, pd, pe, ori3, epspp)) ori3 = 0.0;
+ }
+ if (ori1 == 0.0) zerocount++;
+ if (ori2 == 0.0) zerocount++;
+ if (ori3 == 0.0) zerocount++;
+ // Only (zerocount == 0) or (zerocount == 1) is valid.
+ if (zerocount > 1) {
+ epspp *= 1e-1;
+ restart++;
+ continue;
+ }
+ break;
+ }
+ assert(restart < 32);
+
+ // Create the newpoint.
+ makepoint(&newpoint);
+ // Get the circumcenter. If there are four coplanar points, take
+ // the circumcenter of the circle.
+ if (ori1 == 0.0) {
+ circumsphere(pa, pb, pd, NULL, cent, &d1);
+ } else if (ori2 == 0.0) {
+ circumsphere(pb, pc, pd, NULL, cent, &d1);
+ } else if (ori3 == 0.0) {
+ circumsphere(pc, pa, pd, NULL, cent, &d1);
+ } else {
+ // Get the circumcenter of the tet abcd.
+ circumsphere(pa, pb, pc, pd, cent, &d1);
+ }
+ assert(d1 > 0.0);
+ // Add a random perturbation to newpoint along the vector d->cent.
+ // This way, the perturbed point will be in the plane if there
+ // are four points coplanar (d must be one of them).
+ ps = randgenerator(d1 * 1.0e-3);
+ rs = ps / d1;
+ // Set newpoint (be at the perturbed circumcenter).
+ for (i = 0; i < 3; i++) newpoint[i] = cent[i] + rs * (cent[i] - pd[i]);
+ // Set it's type be FREEVOLVERTEX.
+ setpointtype(newpoint, FREEVOLVERTEX);
+
+ // Locate newpoint in DT.
+ loc = preciselocate(newpoint, &splittet);
+ // Note that newpoint may be outside the DT.
+ if (loc == OUTSIDE) {
+ // The following lines only do check.
+ sym(splittet, neightet);
+ assert(neightet.tet == dummytet);
+ }
+ // Look if the newpoint encroaches upon some subfaces.
+ cavtetlist->append(&splittet);
+ collectcavtets(newpoint, cavtetlist);
+ assert(cavtetlist->len() > 0);
+ reject = tallencsubsfsubs(newpoint, cavtetlist);
+ // Clear the list for the next use.
+ cavtetlist->clear();
+ if (!reject) {
+ // Insert the newpoint into DT.
+ success = insertsite(newpoint, &splittet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ inserthullsite(newpoint, &splittet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Let newpoint remember splittet.
+ setpoint2tet(newpoint, encode(splittet));
+ // Do flip in DT.
+ flip(flipqueue, NULL, false, false, false);
+ // Remove this entry from list.
+ badfacedealloc(badtetrahedrons, tetloop);
+ } else {
+ // newpoint is rejected. Remove it from points.
+ pointdealloc(newpoint);
+ // Repair all encroached segments.
+ perturbrepairencsubs(eps, cavsublist, flipqueue);
+ // Do not remove 'tetloop'. Later it will be tested again.
+ }
+ } else {
+ // This tet has been changed. Remove this entry from list.
+ badfacedealloc(badtetrahedrons, tetloop);
+ if (!isdead(&splittet)) {
+ // It may be co-sphere with its neighbors.
+ checktet4cosph(&splittet, eps, false, true);
+ }
+ }
+ // Get the next badtetrahedron.
+ tetloop = badfacetraverse(badtetrahedrons);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// incrperturbvertices() Remove the local degeneracies in DT. //
+// //
+// A local degeneracy of a DT D is a set of 5 or more vertices which share a //
+// common sphere S and no other vertex of D in S. D is not unique if it has //
+// local degeneracies. This routine removes the local degeneracies from D by //
+// inserting break points (as described in reference [2]). //
+// //
+// 'eps' is a user-provided error tolerance. It is used to detect whether or //
+// not five points are approximate cospherical (evaluated in iscospheric()). //
+// Set it to 0.0 to disable it, i.e., only test pure degenerate point set. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::incrperturbvertices(REAL eps)
+{
+ queue *flipqueue;
+ list *cavsublist, *cavtetlist;
+ long vertcount;
+ int i;
+
+ if (!b->quiet) {
+ printf("Perturbing vertices.\n");
+ }
+
+ vertcount = points->items;
+ // Create a map from points to tets for fastening search.
+ makepoint2tetmap();
+
+ // Initialize working queues, lists.
+ flipqueue = new queue(sizeof(badface));
+ cavsublist = new list(sizeof(face), NULL, 256);
+ // Initialize the pool of encroached subfaces and subsegments.
+ badsubsegs = new memorypool(sizeof(badface), SUBPERBLOCK, POINTER, 0);
+ badsubfaces = new memorypool(sizeof(badface), SUBPERBLOCK, POINTER, 0);
+ // Find all pairs of co-circular subfaces.
+ tallcocirsubs(eps, true);
+ if (b->verbose && badsubfaces->items > 0) {
+ printf(" Removing degenerate subfaces.\n");
+ }
+ perturbrepairencsubs(eps, cavsublist, flipqueue);
+
+ if (b->dofullperturb) {
+ cavtetlist = new list(sizeof(triface), NULL, 256);
+ // Initialize the pool of bad tetrahedra.
+ badtetrahedrons = new memorypool(sizeof(badface), ELEPERBLOCK, POINTER, 0);
+ // Initialize the queues of badfaces.
+ for (i = 0; i < 2; i++) subquefront[i] = (badface *) NULL;
+ for (i = 0; i < 2; i++) subquetail[i] = &subquefront[i];
+ // Find all pairsof co-sphere tets.
+ tallcosphtets(NULL, eps, true);
+ if (b->verbose && badtetrahedrons->items > 0) {
+ printf(" Removing degenerate tetrahedra.\n");
+ }
+ // do {
+ perturbrepairbadtets(eps, cavsublist, cavtetlist, flipqueue);
+ // tallcosphtets(NULL, eps, true);
+ // } while (badtetrahedrons->items > 0);
+ delete cavtetlist;
+ delete badtetrahedrons;
+ badtetrahedrons = (memorypool *) NULL;
+ }
+
+ if (b->verbose) {
+ printf(" %ld break points are inserted.\n", points->items - vertcount);
+ }
+
+ delete cavsublist;
+ delete flipqueue;
+ delete badsubfaces;
+ delete badsubsegs;
+ badsubsegs = (memorypool *) NULL;
+ badsubfaces = (memorypool *) NULL;
+}
+
+//
+// End of vertex perturbation routines
+//
+
+//
+// Begin of segment recovery routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// markacutevertices() Set the type (ACUTEVERTEX, NACUTEVERTEX) of verts. //
+// //
+// Parameter 'acuteangle' gives the upperbound (in degree). Angles which are //
+// smaller or equal than it are assumed as acute angles. A vertex is acute //
+// if at least two segments incident at it with an acute angle. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::markacutevertices(REAL acuteangle)
+{
+ shellface** segsperverlist;
+ face segloop, workseg, inciseg;
+ point eorg, edest, eapex;
+ REAL cosbound, anglearc;
+ REAL v1[3], v2[3], L, D;
+ bool isacute;
+ int* idx2seglist;
+ int idx, i, j, k;
+
+ if (b->verbose) {
+ printf(" Marking segments have acute corners.\n");
+ }
+
+ // Constructing a map from vertex to segments.
+ makesegmentmap(idx2seglist, segsperverlist);
+
+ // Initialize all vertices be unknown.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ // Check and set types for the two ends of this segment.
+ for (segloop.shver = 0; segloop.shver < 2; segloop.shver++) {
+ eorg = sorg(segloop);
+ setpointtype(eorg, FACETVERTEX);
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+
+ anglearc = acuteangle * PI / 180.0;
+ cosbound = cos(anglearc);
+
+ // Loop over the set of subsegments.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ // Check and set types for the two ends of this segment.
+ for (segloop.shver = 0; segloop.shver < 2; segloop.shver++) {
+ eorg = sorg(segloop);
+ if ((pointtype(eorg) != ACUTEVERTEX) &&
+ (pointtype(eorg) != NACUTEVERTEX)) {
+ // This vertex has no type be set yet.
+ idx = pointmark(eorg) - in->firstnumber;
+ isacute = false;
+ for (i = idx2seglist[idx]; i < idx2seglist[idx + 1] && !isacute; i++) {
+ workseg.sh = segsperverlist[i];
+ workseg.shver = 0;
+ if (sorg(workseg) != eorg) {
+ sesymself(workseg);
+ }
+ assert(sorg(workseg) == eorg);
+ edest = sdest(workseg);
+ for (j = i + 1; j < idx2seglist[idx + 1] && !isacute; j++) {
+ inciseg.sh = segsperverlist[j];
+ inciseg.shver = 0;
+ assert(inciseg.sh != workseg.sh);
+ if (sorg(inciseg) != eorg) {
+ sesymself(inciseg);
+ }
+ assert(sorg(inciseg) == eorg);
+ eapex = sdest(inciseg);
+ // Check angles between segs (eorg, edest) and (eorg, eapex).
+ for (k = 0; k < 3; k++) {
+ v1[k] = edest[k] - eorg[k];
+ v2[k] = eapex[k] - eorg[k];
+ }
+ L = sqrt(v1[0] * v1[0] + v1[1] * v1[1] + v1[2] * v1[2]);
+ for (k = 0; k < 3; k++) v1[k] /= L;
+ L = sqrt(v2[0] * v2[0] + v2[1] * v2[1] + v2[2] * v2[2]);
+ for (k = 0; k < 3; k++) v2[k] /= L;
+ D = v1[0] * v2[0] + v1[1] * v2[1] + v1[2] * v2[2];
+ if (D >= cosbound) {
+ isacute = true;
+ }
+ }
+ }
+ if (isacute) {
+ setpointtype(eorg, ACUTEVERTEX);
+ } else {
+ setpointtype(eorg, NACUTEVERTEX);
+ }
+ }
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+
+ delete [] idx2seglist;
+ delete [] segsperverlist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// finddirection() Find the first tetrahedron on the path from one point //
+// to another. //
+// //
+// Find the tetrahedron that intersects a line segment L (from the origin of //
+// 'searchtet' to the point 'tend'), and returns the result in 'searchtet'. //
+// The origin of 'searchtet' does not change, even though the tetrahedron //
+// returned may differ from the one passed in. This routine is used to find //
+// the direction to move in to get from one point to another. //
+// //
+// The return value notes the location of the line segment L with respect to //
+// 'searchtet': //
+// - Returns RIGHTCOLLINEAR indicates L is collinear with the line segment //
+// from the origin to the destination of 'searchtet'. //
+// - Returns LEFTCOLLINEAR indicates L is collinear with the line segment //
+// from the origin to the apex of 'searchtet'. //
+// - Returns TOPCOLLINEAR indicates L is collinear with the line segment //
+// from the origin to the opposite of 'searchtet'. //
+// - Returns ACROSSEDGE indicates L intersects with the line segment from //
+// the destination to the apex of 'searchtet'. //
+// - Returns ACROSSFACE indicates L intersects with the face opposite to //
+// the origin of 'searchtet'. //
+// - Returns BELOWHULL indicates L crosses outside the mesh domain. This //
+// can only happen when the domain is non-convex. //
+// //
+// NOTE: This routine only works correctly when the mesh is exactly Delaunay.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+enum tetgenmesh::finddirectionresult tetgenmesh::
+finddirection(triface *searchtet, point tend)
+{
+ triface neightet;
+ point tstart, tdest, tapex, toppo;
+ REAL ori1, ori2, ori3;
+
+ tstart = org(*searchtet);
+ assert(tstart != tend);
+ adjustedgering(*searchtet, CCW);
+ if (tstart != org(*searchtet)) {
+ enextself(*searchtet); // For keeping the same origin.
+ }
+ tdest = dest(*searchtet);
+ if (tdest == tend) {
+ return RIGHTCOLLINEAR;
+ }
+ tapex = apex(*searchtet);
+ if (tapex == tend) {
+ return LEFTCOLLINEAR;
+ }
+
+ ori1 = orient3d(tstart, tdest, tapex, tend);
+ if (ori1 > 0.0) {
+ // 'tend' is below the face, get the neighbor of this side.
+ sym(*searchtet, neightet);
+ if (neightet.tet != dummytet) {
+ findorg(&neightet, tstart);
+ adjustedgering(neightet, CCW);
+ if (org(neightet) != tstart) {
+ enextself(neightet); // keep the same origin.
+ }
+ // Set the changed configuratiuon.
+ *searchtet = neightet;
+ ori1 = -1.0;
+ tdest = dest(*searchtet);
+ tapex = apex(*searchtet);
+ } else {
+ // A hull face. Only possible for a nonconvex mesh.
+#ifdef SELF_CHECK
+ assert(nonconvex);
+#endif
+ return BELOWHULL;
+ }
+ }
+
+ // Repeatedly change the 'searchtet', remain 'tstart' be its origin, until
+ // find a tetrahedron contains 'tend' or is crossed by the line segment
+ // from 'tstart' to 'tend'.
+ while (true) {
+ toppo = oppo(*searchtet);
+ if (toppo == tend) {
+ return TOPCOLLINEAR;
+ }
+ ori2 = orient3d(tstart, toppo, tdest, tend);
+ if (ori2 > 0.0) {
+ // 'tend' is below the face, get the neighbor at this side.
+ fnext(*searchtet, neightet);
+ symself(neightet);
+ if (neightet.tet != dummytet) {
+ findorg(&neightet, tstart);
+ adjustedgering(neightet, CCW);
+ if (org(neightet) != tstart) {
+ enextself(neightet); // keep the same origin.
+ }
+ // Set the changed configuration.
+ *searchtet = neightet;
+ ori1 = -1.0;
+ tdest = dest(*searchtet);
+ tapex = apex(*searchtet);
+ // Continue the search from the changed 'searchtet'.
+ continue;
+ } else {
+ // A hull face. Only possible for a nonconvex mesh.
+#ifdef SELF_CHECK
+ assert(nonconvex);
+#endif
+ return BELOWHULL;
+ }
+ }
+ ori3 = orient3d(tapex, toppo, tstart, tend);
+ if (ori3 > 0.0) {
+ // 'tend' is below the face, get the neighbor at this side.
+ enext2fnext(*searchtet, neightet);
+ symself(neightet);
+ if (neightet.tet != dummytet) {
+ findorg(&neightet, tstart);
+ adjustedgering(neightet, CCW);
+ if (org(neightet) != tstart) {
+ enextself(neightet); // keep the same origin.
+ }
+ // Set the changed configuration.
+ *searchtet = neightet;
+ ori1 = -1.0;
+ tdest = dest(*searchtet);
+ tapex = apex(*searchtet);
+ // Continue the search from the changed 'searchtet'.
+ continue;
+ } else {
+ // A hull face. Only possible for a nonconvex mesh.
+#ifdef SELF_CHECK
+ assert(nonconvex);
+#endif
+ return BELOWHULL;
+ }
+ }
+ // Now 'ori1', 'ori2' and 'ori3' are possible be 0.0 or all < 0.0;
+ if (ori1 < 0.0) {
+ // Possible cases are: ACROSSFACE, ACROSSEDGE, TOPCOLLINEAR.
+ if (ori2 < 0.0) {
+ if (ori3 < 0.0) {
+ return ACROSSFACE;
+ } else { // ori3 == 0.0;
+ // Cross edge (apex, oppo)
+ enext2fnextself(*searchtet);
+ esymself(*searchtet); // org(*searchtet) == tstart;
+ return ACROSSEDGE;
+ }
+ } else { // ori2 == 0.0;
+ if (ori3 < 0.0) {
+ // Cross edge (dest, oppo)
+ fnextself(*searchtet);
+ esymself(*searchtet);
+ enextself(*searchtet); // org(*searchtet) == tstart;
+ return ACROSSEDGE;
+ } else { // ori3 == 0.0;
+ // Collinear with edge (org, oppo)
+ return TOPCOLLINEAR;
+ }
+ }
+ } else { // ori1 == 0.0;
+ // Possible cases are: RIGHTCOLLINEAR, LEFTCOLLINEAR, ACROSSEDGE.
+ if (ori2 < 0.0) {
+ if (ori3 < 0.0) {
+ // Cross edge (tdest, tapex)
+ return ACROSSEDGE;
+ } else { // ori3 == 0.0
+ // Collinear with edge (torg, tapex)
+ return LEFTCOLLINEAR;
+ }
+ } else { // ori2 == 0.0;
+ assert(ori3 != 0.0);
+ // Collinear with edge (torg, tdest)
+ return RIGHTCOLLINEAR;
+ }
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsearchtet() Find a tetrahedron whose origin is either 'p1' or 'p2'. //
+// //
+// On return, the origin of 'searchtet' is either 'p1' or 'p2', and 'tend' //
+// returns the other point. 'searchtet' serves as the starting tetrahedron //
+// for searching of the line segment from 'p1' to 'p2' or vice versa. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+getsearchtet(point p1, point p2, triface* searchtet, point* tend)
+{
+ tetrahedron encodedtet1, encodedtet2;
+
+ // Is there a valid handle provided by the user?
+ if ((searchtet->tet != (tetrahedron *) NULL) && !isdead(searchtet)) {
+ // Find which endpoint the handle holds.
+ if (findorg(searchtet, p1)) {
+ *tend = p2;
+ return;
+ } else {
+ if (findorg(searchtet, p2)) {
+ *tend = p1;
+ return;
+ }
+ }
+ }
+ // If not, search the handle stored in 'p1' or 'p2'.
+ *tend = (point) NULL;
+ encodedtet1 = point2tet(p1);
+ encodedtet2 = point2tet(p2);
+ if (encodedtet1 != (tetrahedron) NULL) {
+ decode(encodedtet1, *searchtet);
+ // Be careful, here 'searchtet' may be dead.
+ if (findorg(searchtet, p1)) {
+ *tend = p2;
+ }
+ } else if (encodedtet2 != (tetrahedron) NULL) {
+ decode(encodedtet2, *searchtet);
+ // Be careful, here 'searchtet' may be dead.
+ if (findorg(searchtet, p2)) {
+ *tend = p1;
+ }
+ }
+ // If still not, perform a full point location. The starting tetrahedron
+ // is chosen as follows: Use the handle stored in 'p1' or 'p2' if it is
+ // alive; otherwise, start from a tetrahedron on the convex hull.
+ if (*tend == (point) NULL) {
+ if (encodedtet1 != (tetrahedron) NULL) {
+ decode(encodedtet1, *searchtet);
+ // Be careful, here 'searchtet' may be dead.
+ }
+ if (isdead(searchtet)) {
+ if (encodedtet2 != (tetrahedron) NULL) {
+ decode(encodedtet2, *searchtet);
+ // Be careful, here 'searchtet' may be dead.
+ }
+ if (isdead(searchtet)) {
+ searchtet->tet = dummytet;
+ searchtet->loc = 0;
+ symself(*searchtet);
+ }
+ assert(!isdead(searchtet));
+ }
+ if (locate(p1, searchtet) != ONVERTEX) {
+ printf("Internal error in getsearchtet(): Failed to locate point\n");
+ printf(" (%.12g, %.12g, %.12g) %d.\n", p1[0], p1[1], p1[2],
+ pointmark(p1));
+ internalerror();
+ }
+ // Remember this handle in 'p1' to enhance the search speed.
+ setpoint2tet(p1, encode(*searchtet));
+ *tend = p2;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// isedgeencroached() Check whether or not a subsegment is encroached by //
+// a given point. //
+// //
+// A segment with endpoints 'p1' and 'p2' is encroached by the point 'testpt'//
+// if it lies in the diametral sphere of this segment. The degenerate case //
+// that 'testpt' lies on the sphere can be treated as either be encroached //
+// or not so. If you want to regard this case as be encroached, set the flag //
+// 'degflag' be TRUE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+isedgeencroached(point p1, point p2, point testpt, bool degflag)
+{
+ REAL dotproduct;
+
+ // Check if the segment is facing an angle larger than 90 degree?
+ dotproduct = (p1[0] - testpt[0]) * (p2[0] - testpt[0])
+ + (p1[1] - testpt[1]) * (p2[1] - testpt[1])
+ + (p1[2] - testpt[2]) * (p2[2] - testpt[2]);
+ if (dotproduct < 0) {
+ return true;
+ } else if (dotproduct == 0 && degflag) {
+ return true;
+ } else {
+ return false;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// scoutrefpoint() Search the reference point of a missing segment. //
+// //
+// A segment S is missing in current Delaunay tetrahedralization DT and will //
+// be split by inserting a point V in it. The two end points of S are the //
+// origin of 'searchtet' and 'tend'. And we know that S is crossing the face //
+// of 'searchtet' opposite to its origin (may be intersecting with the edge //
+// from the destination to the apex of the 'searchtet'). The search of P is //
+// completed by walking through all faces of DT across by S. //
+// //
+// Warning: This routine is correct when the tetrahedralization is Delaunay //
+// and convex. Otherwise, the search loop may not terminate. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::point tetgenmesh::scoutrefpoint(triface* searchtet, point tend)
+{
+ triface checkface;
+ point tstart, testpt, refpoint;
+ REAL cent[3], radius, largest;
+ REAL ahead;
+ bool ncollinear;
+ int sides;
+
+ if (b->verbose > 2) {
+ printf(" Scout the reference point of segment (%d, %d).\n",
+ pointmark(org(*searchtet)), pointmark(tend));
+ }
+
+ tstart = org(*searchtet);
+ refpoint = (point) NULL;
+
+ // Check the three vertices of the crossing face.
+ testpt = apex(*searchtet);
+ if (isedgeencroached(tstart, tend, testpt, true)) {
+ ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
+ assert(ncollinear);
+ refpoint = testpt;
+ largest = radius;
+ }
+ testpt = dest(*searchtet);
+ if (isedgeencroached(tstart, tend, testpt, true)) {
+ ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
+ assert(ncollinear);
+ if (refpoint == (point) NULL) {
+ refpoint = testpt;
+ largest = radius;
+ } else {
+ if (radius > largest) {
+ refpoint = testpt;
+ largest = radius;
+ }
+ }
+ }
+ testpt = oppo(*searchtet);
+ if (isedgeencroached(tstart, tend, testpt, true)) {
+ ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
+ assert(ncollinear);
+ if (refpoint == (point) NULL) {
+ refpoint = testpt;
+ largest = radius;
+ } else {
+ if (radius > largest) {
+ refpoint = testpt;
+ largest = radius;
+ }
+ }
+ }
+ // Check the opposite vertex of the neighboring tet in case the segment
+ // crosses the edge (leftpoint, rightpoint) of the crossing face.
+ sym(*searchtet, checkface);
+ if (checkface.tet != dummytet) {
+ testpt = oppo(checkface);
+ if (isedgeencroached(tstart, tend, testpt, true)) {
+ ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
+ assert(ncollinear);
+ if (refpoint == (point) NULL) {
+ refpoint = testpt;
+ largest = radius;
+ } else {
+ if (radius > largest) {
+ refpoint = testpt;
+ largest = radius;
+ }
+ }
+ }
+ }
+
+ // Walk through all crossing faces.
+ enextfnext(*searchtet, checkface);
+ sym(checkface, *searchtet);
+ while (true) {
+ // Check if we are reaching the boundary of the triangulation.
+ assert(searchtet->tet != dummytet);
+ // Search for an adjoining tetrahedron we can walk through.
+ searchtet->ver = 0;
+ // 'testpt' is the shared vertex for the following orientation tests.
+ testpt = oppo(*searchtet);
+ if (testpt == tend) {
+ // The searching is finished.
+ break;
+ } else {
+ // 'testpt' may encroach the segment.
+ if ((testpt != tstart) && (testpt != refpoint)) {
+ if (isedgeencroached(tstart, tend, testpt, true)) {
+ ncollinear = circumsphere(tstart, tend, testpt, NULL, cent, &radius);
+ if (!ncollinear) {
+ // 'testpt' is collinear with the segment. It may happen when a
+ // set of collinear and continuous segments is defined by two
+ // extreme endpoints. In this case, we should choose 'testpt'
+ // as the splitting point immediately. No new point should be
+ // created.
+ refpoint = testpt;
+ break;
+ }
+ if (refpoint == (point) NULL) {
+ refpoint = testpt;
+ largest = radius;
+ } else {
+ if (radius > largest) {
+ refpoint = testpt;
+ largest = radius;
+ }
+ }
+ }
+ }
+ }
+ // Check three side-faces of 'searchtet' to find the one through
+ // which we can walk next.
+ for (sides = 0; sides < 3; sides++) {
+ fnext(*searchtet, checkface);
+ ahead = orient3d(org(checkface), dest(checkface), testpt, tend);
+ if (ahead < 0.0) {
+ // We can walk through this face and continue the searching.
+ sym(checkface, *searchtet);
+ break;
+ }
+ enextself(*searchtet);
+ }
+ assert (sides < 3);
+ }
+
+ assert(refpoint != (point) NULL);
+ return refpoint;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsegmentorigin() Return the origin of the (unsplit) segment. //
+// //
+// After a segment (or a subsegment) is split. Two resulting subsegments are //
+// connecting each other through the pointers saved in their data fields. //
+// With these pointers, the whole (unsplit) segment can be found. 'splitseg' //
+// may be a split subsegment. Returns the origin of the unsplit segment. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::point tetgenmesh::getsegmentorigin(face* splitseg)
+{
+ face workseg;
+ point farorg;
+
+ farorg = sorg(*splitseg);
+ if ((pointtype(farorg) != ACUTEVERTEX) &&
+ (pointtype(farorg) != NACUTEVERTEX)) {
+ workseg = *splitseg;
+ do {
+ senext2self(workseg);
+ spivotself(workseg);
+ if (workseg.sh != dummysh) {
+ workseg.shver = 0; // It's a subsegment.
+ if (sdest(workseg) != farorg) {
+ sesymself(workseg);
+ assert(sdest(workseg) == farorg);
+ }
+ farorg = sorg(workseg);
+ if ((pointtype(farorg) == ACUTEVERTEX) ||
+ (pointtype(farorg) == NACUTEVERTEX)) break;
+ }
+ } while (workseg.sh != dummysh);
+ }
+ assert((pointtype(farorg) == ACUTEVERTEX) ||
+ (pointtype(farorg) == NACUTEVERTEX));
+ return farorg;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsplitpoint() Get a point for splitting a segment. //
+// //
+// 'splitseg' is the segment will be split. 'refpoint' is a reference point //
+// for splitting this segment. Moreover, it should not collinear with the //
+// splitting segment. (The collinear case will be detected by iscollinear() //
+// before entering this routine.) The calculation of the splitting point is //
+// governed by three rules introduced in my paper. //
+// //
+// After the position is calculated, a new point is created at this location.//
+// The new point has one of the two pointtypes: FREESEGVERTEX indicating it //
+// is an inserting vertex on segment, and NACUTEVERTEX indicating it is an //
+// endpoint of a segment which original has type-3 now becomes type-2. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::point tetgenmesh::getsplitpoint(face* splitseg, point refpoint)
+{
+ point splitpoint;
+ point farorg, fardest;
+ point ei, ej, ek, c;
+ REAL v[3], r, split;
+ REAL d1, ps, rs;
+ bool acuteorg, acutedest;
+ int stype;
+ int i;
+
+ // First determine the type of the segment (type-1, type-2, or type-3).
+ farorg = getsegmentorigin(splitseg);
+ acuteorg = (pointtype(farorg) == ACUTEVERTEX);
+ sesymself(*splitseg);
+ fardest = getsegmentorigin(splitseg);
+ acutedest = (pointtype(fardest) == ACUTEVERTEX);
+ sesymself(*splitseg);
+
+ if (acuteorg) {
+ if (acutedest) {
+ stype = 3;
+ } else {
+ stype = 2;
+ ek = farorg;
+ }
+ } else {
+ if (acutedest) {
+ stype = 2;
+ // Adjust splitseg, so that its origin is acute.
+ sesymself(*splitseg);
+ ek = fardest;
+ } else {
+ stype = 1;
+ }
+ }
+ ei = sorg(*splitseg);
+ ej = sdest(*splitseg);
+
+ if (b->verbose > 1) {
+ printf(" Splitting segment (%d, %d) type-%d with refpoint %d.\n",
+ pointmark(ei), pointmark(ej), stype, pointmark(refpoint));
+ }
+
+ if (stype == 1 || stype == 3) {
+ // Use rule-1.
+ REAL eij, eip, ejp;
+ eij = distance(ei, ej);
+ eip = distance(ei, refpoint);
+ ejp = distance(ej, refpoint);
+ if ((eip < ejp) && (eip < 0.5 * eij)) {
+ c = ei;
+ r = eip;
+ } else if ((eip > ejp) && (ejp < 0.5 * eij)) {
+ c = ej;
+ ej = ei;
+ r = ejp;
+ } else {
+ c = ei;
+ r = 0.5 * eij;
+ }
+ split = r / eij;
+ for (i = 0; i < 3; i++) {
+ v[i] = c[i] + split * (ej[i] - c[i]);
+ }
+ } else {
+ // Use rule-2 or rule-3.
+ REAL eki, ekj, ekp, evj, evp, eiv;
+ c = ek;
+ eki = distance(ek, ei); // eki may equal zero.
+ ekj = distance(ek, ej);
+ ekp = distance(ek, refpoint);
+ // Calculate v (the going to split position between ei, ej).
+ r = ekp;
+ assert(eki < r && r < ekj);
+ split = r / ekj;
+ for (i = 0; i < 3; i++) {
+ v[i] = c[i] + split * (ej[i] - c[i]);
+ }
+ evj = ekj - r; // distance(v, ej);
+ evp = distance(v, refpoint);
+ if (evj < evp) {
+ // v is rejected, use rule-3.
+ eiv = distance(ei, v);
+ if (evp <= 0.5 * eiv) {
+ r = eki + eiv - evp;
+ } else {
+ r = eki + 0.5 * eiv;
+ }
+ assert(eki < r && r < ekj);
+ split = r / ekj;
+ for (i = 0; i < 3; i++) {
+ v[i] = c[i] + split * (ej[i] - c[i]);
+ }
+ if (b->verbose > 1) {
+ printf(" Using rule-3.\n");
+ }
+ }
+ }
+
+ if (b->verbose > 1) {
+ if (stype == 2) {
+ printf(" Split = %.12g.\n", distance(ei, v) / distance(ei, ej));
+ } else {
+ printf(" Split = %.12g.\n", distance(c, v) / distance(c, ej));
+ }
+ }
+
+ // Create the newpoint.
+ makepoint(&splitpoint);
+ // Add a random perturbation on splitpoint.
+ d1 = distance(c, v);
+ assert(d1 > 0.0);
+ if (stype == 1 || stype == 3) {
+ ps = randgenerator(d1 * 1.0e-3);
+ } else {
+ // For type-2 segment, add a smaller perturbation.
+ ps = randgenerator(d1 * 1.0e-5);
+ }
+ rs = ps / d1;
+ // Perturb splitpoint away from c.
+ for (i = 0; i < 3; i++) {
+ splitpoint[i] = c[i] + (1.0 + rs) * (v[i] - c[i]);
+ }
+ for (i = 0; i < in->numberofpointattributes; i++) {
+ splitpoint[i + 3] = c[i + 3] + (split + rs) * (ej[i + 3] - c[i + 3]);
+ }
+ if (stype == 3) {
+ // Change a type-3 segment into two type-2 segments.
+ setpointtype(splitpoint, NACUTEVERTEX);
+ } else {
+ // Set it's type be FREESEGVERTEX.
+ setpointtype(splitpoint, FREESEGVERTEX);
+ }
+
+ return splitpoint;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// delaunizesegments() Split segments repeatedly until they appear in a //
+// Delaunay tetrahedralization. //
+// //
+// Given a PLC X, which has a set V of vertices and a set of segments. Start //
+// from a Delaunay tetrahedralization D of V, this routine recovers segments //
+// of X in D by incrementally inserting points on missing segments, updating //
+// D with the newly inserted points into D', which remains to be a Delaunay //
+// tetrahedralization and respects the segments of X. Hence, each segment of //
+// X appears as a union of edges in D'. //
+// //
+// This routine dynamically maintains two meshes, one is DT, another is the //
+// surface mesh F of X. DT and F have exactly the same vertices. They are //
+// updated simultaneously with the newly inserted points. //
+// //
+// Missing segments are found by looping the set S of segments, checking the //
+// existence of each segment in DT. Once a segment is found missing in DT, //
+// it is split into two subsegments by inserting a point into both DT and F, //
+// and S is updated accordingly. However, the inserted point may cause some //
+// other existing segments be non-Delaunay, hence are missing from the DT. //
+// In order to force all segments to appear in DT, we have to loop S again //
+// after some segments are split. (A little ugly method) Use a handle to //
+// remember the last segment be split in one loop, hence all segments after //
+// it are existing and need not be checked. //
+// //
+// In priciple, a segment on the convex hull should exist in DT. However, if //
+// there are four coplanar points on the convex hull, and the DT only can //
+// contain one diagonal edge which is unfortunately not the segment, then it //
+// is missing. During the recovery of the segment, it is possible that the //
+// calculated inserting point for recovering this convex hull segment is not //
+// exact enough and lies (slightly) outside the DT. In order to insert the //
+// point, we enlarge the convex hull of the DT, so it can contain the point //
+// and remains convex. 'inserthullsite()' is called for this case. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::delaunizesegments()
+{
+ queue *flipqueue;
+ tetrahedron encodedtet;
+ triface searchtet, splittet;
+ face splitsh, symsplitsub;
+ face segloop, symsplitseg;
+ face lastsplit;
+ point refpoint, splitpoint, sympoint;
+ point tend, checkpoint;
+ point p1, p2, pa;
+ enum finddirectionresult collinear;
+ enum insertsiteresult success;
+ enum locateresult symloc;
+ bool finish, coll;
+ long vertcount;
+ int i, j;
+
+ if (!b->quiet) {
+ printf("Delaunizing segments.\n");
+ }
+
+ // Mark segment vertices (acute or not) for determining segment types.
+ markacutevertices(89.0);
+ // Construct a map from points to tetrahedra for speeding point location.
+ makepoint2tetmap();
+ // Initialize a queue for returning non-Delaunay faces and edges.
+ flipqueue = new queue(sizeof(badface));
+ // 'lastsplit' is the last segment be split in one loop, all segments
+ // after it are existing. At first, set it be NULL;
+ lastsplit.sh = (shellface *) NULL;
+ // Remember the current number of points.
+ vertcount = points->items;
+
+ finish = false;
+ while (!finish && (steinerleft != 0)) {
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while ((segloop.sh != (shellface *) NULL) && (steinerleft != 0)) {
+ // Search segment ab in DT.
+ p1 = sorg(segloop); // p1 = a;
+ p2 = sdest(segloop); // p2 = b;
+ if (b->verbose > 2) {
+ printf(" Checking segment (%d, %d).\n", pointmark(p1), pointmark(p2));
+ }
+ getsearchtet(p1, p2, &searchtet, &tend);
+ collinear = finddirection(&searchtet, tend);
+ if (collinear == LEFTCOLLINEAR) {
+ checkpoint = apex(searchtet);
+ } else if (collinear == RIGHTCOLLINEAR) {
+ checkpoint = dest(searchtet);
+ } else if (collinear == TOPCOLLINEAR) {
+ checkpoint = oppo(searchtet);
+ } else {
+ assert(collinear == ACROSSFACE || collinear == ACROSSEDGE);
+ checkpoint = (point) NULL;
+ }
+ if (checkpoint != tend) {
+ // ab is missing.
+ splitpoint = (point) NULL;
+ if (checkpoint != (point) NULL) {
+ // An existing point c is found on the segment. It can happen when
+ // ab is defined by a long segment with c inside it. Use c to
+ // split ab. No new point is created.
+ splitpoint = checkpoint;
+ if (pointtype(checkpoint) == FREEVOLVERTEX) {
+ // c is not a segment vertex yet. It becomes NACUTEVERTEX.
+ setpointtype(splitpoint, NACUTEVERTEX);
+ } else if (pointtype(checkpoint) == ACUTEVERTEX) {
+ // c is an acute vertex. The definition of PLC is wrong.
+ } else if (pointtype(checkpoint) == NACUTEVERTEX) {
+ // c is an nonacute vertex. The definition of PLC is wrong.
+ } else {
+ assert(0);
+ }
+ } else {
+ // Find a reference point p of ab.
+ refpoint = scoutrefpoint(&searchtet, tend);
+ if (pointtype(refpoint) == FREEVOLVERTEX) {
+ // p is an input point, check if it is nearly collinear with ab.
+ coll = iscollinear(p1, p2, refpoint, b->epsilon);
+ if (coll) {
+ // a, b, and p are collinear. We insert p into ab. p becomes
+ // a segment vertex with type NACUTEVERTEX.
+ splitpoint = refpoint;
+ setpointtype(splitpoint, NACUTEVERTEX);
+ }
+ }
+ if (splitpoint == (point) NULL) {
+ // Calculate a split point v using rule 1, or 2, or 3.
+ splitpoint = getsplitpoint(&segloop, refpoint);
+
+ // Is there periodic boundary conditions?
+ if (checkpbcs) {
+ // Yes! Insert points on other segments of incident pbcgroups.
+ i = shellmark(segloop) - 1;
+ for (j = idx2segpglist[i]; j < idx2segpglist[i + 1]; j++) {
+ makepoint(&sympoint);
+ symloc = getsegpbcsympoint(splitpoint, &segloop, sympoint,
+ &symsplitseg, segpglist[j]);
+ assert(symloc != OUTSIDE);
+ if (symloc == ONEDGE) {
+ assert(symsplitseg.sh != dummysh);
+ setpointtype(sympoint, FREESEGVERTEX);
+ // setpoint2sh(sympoint, sencode(symsplitseg));
+ // Insert sympoint into DT.
+ pa = sorg(symsplitseg);
+ splittet.tet = dummytet;
+ // Find a good start point to search.
+ encodedtet = point2tet(pa);
+ if (encodedtet != (tetrahedron) NULL) {
+ decode(encodedtet, splittet);
+ if (isdead(&splittet)) {
+ splittet.tet = dummytet;
+ }
+ }
+ // Locate sympoint in DT. Do exact location.
+ success = insertsite(sympoint, &splittet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ inserthullsite(sympoint, &splittet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Let sympoint remember splittet.
+ setpoint2tet(sympoint, encode(splittet));
+ // Do flip in DT.
+ flip(flipqueue, NULL, false, false, false);
+ // Insert sympoint into F.
+ symsplitseg.shver = 0;
+ spivot(symsplitseg, symsplitsub);
+ // sympoint should on the edge of symsplitsub.
+ splitsubedge(sympoint, &symsplitsub, flipqueue);
+ // Do flip in facet.
+ flipsub(flipqueue);
+ } else if (symloc == ONVERTEX) {
+ // The sympoint already exists. It is possible when two
+ // pbc groups are exactly the same. Omit this point.
+ pointdealloc(sympoint);
+ }
+ }
+ }
+
+ // Insert 'splitpoint' into DT.
+ if (isdead(&searchtet)) searchtet.tet = dummytet;
+ success = insertsite(splitpoint, &searchtet, false, flipqueue);
+ if (success == OUTSIDEPOINT) {
+ // A convex hull edge is missing, and the inserting point lies
+ // (slightly) outside the convex hull due to the significant
+ // digits lost in the calculation. Enlarge the convex hull.
+ inserthullsite(splitpoint, &searchtet, flipqueue, NULL, NULL);
+ }
+ if (steinerleft > 0) steinerleft--;
+ // Remember a handle in 'splitpoint' to enhance the speed of
+ // consequent point location.
+ setpoint2tet(splitpoint, encode(searchtet));
+ // Maintain Delaunayness in DT.
+ flip(flipqueue, NULL, false, false, false);
+ }
+ }
+ // Insert 'splitpoint' into F.
+ spivot(segloop, splitsh);
+ splitsubedge(splitpoint, &splitsh, flipqueue);
+ flipsub(flipqueue);
+ // Remember 'segloop'.
+ lastsplit = segloop;
+ } else {
+ // ab exists. Is it the last one we've checked?
+ if (segloop.sh == lastsplit.sh) {
+ finish = true;
+ break;
+ }
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+ if (lastsplit.sh == (shellface *) NULL) {
+ // No missing segment!
+ finish = true;
+ }
+ }
+
+ if (b->verbose) {
+ printf(" %ld protect points are inserted.\n", points->items - vertcount);
+ }
+
+ delete flipqueue;
+}
+
+//
+// End of segments recovery routines
+//
+
+//
+// Begin of facet recovery routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insertsubface() Insert a subface into the Delaunay tetrahedralization. //
+// //
+// Search the subface in current Delaunay tetrahedralization. Return TRUE if //
+// the subface exists, i.e., it appears as a face of the DT and is inserted. //
+// Otherwise, return FALSE indicating it is a missing face. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::insertsubface(face* insertsh, triface* searchtet)
+{
+ triface spintet, symtet;
+ face testsh, testseg;
+ face spinsh, casin, casout;
+ point tapex, checkpoint;
+ enum finddirectionresult collinear;
+ int hitbdry;
+
+ // Search one edge of 'insertsh'.
+ getsearchtet(sorg(*insertsh), sdest(*insertsh), searchtet, &checkpoint);
+ collinear = finddirection(searchtet, checkpoint);
+ if (collinear == LEFTCOLLINEAR) {
+ enext2self(*searchtet);
+ esymself(*searchtet);
+ } else if (collinear == TOPCOLLINEAR) {
+ fnextself(*searchtet);
+ enext2self(*searchtet);
+ esymself(*searchtet);
+ }
+ if (dest(*searchtet) != checkpoint) {
+ // The edge is missing => subface is missing.
+ return false;
+ }
+
+ // Spin around the edge (torg, tdest), look for a face containing tapex.
+ tapex = sapex(*insertsh);
+ spintet = *searchtet;
+ hitbdry = 0;
+ do {
+ if (apex(spintet) == tapex) {
+ // The subface is exist in DT. We will insert this subface. Before
+ // insertion, make sure there is no subface at this position.
+ tspivot(spintet, testsh);
+ if (testsh.sh == dummysh) {
+ adjustedgering(spintet, CCW);
+ findedge(insertsh, org(spintet), dest(spintet));
+ tsbond(spintet, *insertsh);
+ sym(spintet, symtet); // 'symtet' maybe outside, use it anyway.
+ sesymself(*insertsh);
+ tsbond(symtet, *insertsh);
+ } else {
+ // There already exists one subface. They're Duplicated.
+ printf("Warning: Two subfaces are found duplicated at ");
+ printf("(%d, %d, %d)\n", pointmark(sorg(testsh)),
+ pointmark(sdest(testsh)), pointmark(sapex(testsh)));
+ printf(" The one of facet #%d is ignored.\n", shellmark(*insertsh));
+ // printf(" Hint: -d switch can find all duplicated facets.\n");
+ }
+ return true;
+ }
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ if (hitbdry < 2) {
+ esym(*searchtet, spintet);
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ }
+ }
+ }
+ } while (hitbdry < 2 && apex(spintet) != apex(*searchtet));
+
+ // The face is missing.
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tritritest() Test if two triangles are intersecting in their interior. //
+// //
+// One triangles is represented by 'checktet', the other is given by three //
+// corners 'p1', 'p2' and 'p3'. This routine calls tri_tri_inter() to detect //
+// whether these two triangles are exactly intersecting in their interior //
+// (excluding the cases share a vertex, share an edge, or are coincide). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::tritritest(triface* checktet, point p1, point p2, point p3)
+{
+ point forg, fdest, fapex;
+ enum interresult intersect;
+
+ forg = org(*checktet);
+ fdest = dest(*checktet);
+ fapex = apex(*checktet);
+
+#ifdef SELF_CHECK
+ REAL ax, ay, az, bx, by, bz;
+ REAL n[3];
+ // face (torg, tdest, tapex) should not be degenerate. However p1, p2,
+ // and p3 may be collinear. Check it.
+ ax = forg[0] - fdest[0];
+ ay = forg[1] - fdest[1];
+ az = forg[2] - fdest[2];
+ bx = forg[0] - fapex[0];
+ by = forg[1] - fapex[1];
+ bz = forg[2] - fapex[2];
+ n[0] = ay * bz - by * az;
+ n[1] = az * bx - bz * ax;
+ n[2] = ax * by - bx * ay;
+ assert(fabs(n[0]) + fabs(n[1]) + fabs(n[2]) > 0.0);
+ // The components of n should not smaller than the machine epsilon.
+
+ ax = p1[0] - p2[0];
+ ay = p1[1] - p2[1];
+ az = p1[2] - p2[2];
+ bx = p1[0] - p3[0];
+ by = p1[1] - p3[1];
+ bz = p1[2] - p3[2];
+ n[0] = ay * bz - by * az;
+ n[1] = az * bx - bz * ax;
+ n[2] = ax * by - bx * ay;
+ assert(fabs(n[0]) + fabs(n[1]) + fabs(n[2]) > 0.0);
+ // The components of n should not smaller than the machine epsilon.
+#endif
+
+ intersect = tri_tri_inter(forg, fdest, fapex, p1, p2, p3);
+ return intersect == INTERSECT;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// initializecavity() Initialize the cavity with a list of faces. //
+// //
+// Initialize the cavity C with a list of faces that bound C. Each face f of //
+// C is hold by a tetrahedron t adjacent to C. t is outside the cavity (i.e.,//
+// uninfected). Such t may not exist when f is on convex hull. In this case, //
+// create a fake tetrahedron t' in order to hold f, oppo(t') = NULL. t' will //
+// be removed automatically after C is retriangulated. //
+// //
+// 'floorlist' is a list of coplanar subfaces, they are oriented in the same //
+// direction pointing to the ceiling. 'ceilinglist' is a list of faces of //
+// tetrahedra which are crossing the cavity, they form the rest part of the //
+// boundary of the cavity. 'frontlink' is used to return the list of fronts, //
+// it is empty on input. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+initializecavity(list* floorlist, list* ceillist, link* frontlink)
+{
+ triface neightet, casingtet;
+ triface faketet;
+ face worksh;
+ int i;
+
+ // First add all faces in 'floorlist' into 'frontlink'.
+ for (i = 0; i < floorlist->len(); i++) {
+ // Get f = worksh.
+ worksh = * (face *)(* floorlist)[i];
+ // Current side of f should be empty.
+ stpivot(worksh, neightet);
+ assert(neightet.tet == dummytet);
+ // Get adjacent tetrahedron t.
+ sesymself(worksh);
+ stpivot(worksh, casingtet);
+ // Does t exist?
+ if (casingtet.tet == dummytet) {
+ // No. Create a fake tet t' to hold f temporarily. t' will be removed
+ // after f is hold by a new tetrahedron in C.
+ maketetrahedron(&faketet);
+ setorg(faketet, sorg(worksh));
+ setdest(faketet, sdest(worksh));
+ setapex(faketet, sapex(worksh));
+ setoppo(faketet, (point) NULL); // Indicates it is 'fake'.
+ tsbond(faketet, worksh);
+ frontlink->add(&faketet);
+ } else {
+ frontlink->add(&casingtet);
+ }
+ }
+ // Second add all casing faces in 'ceilinglist' into 'frontlink'.
+ for (i = 0; i < ceillist->len(); i++) {
+ neightet = * (triface *) (* ceillist)[i];
+ // The ceil is a face of cavity tetrahedron (going to be deleted).
+ assert(infected(neightet));
+ // Get the adjacent tetrahedron t.
+ sym(neightet, casingtet);
+ // Does t exist?
+ if (casingtet.tet == dummytet) {
+ // No. Create a fake tet t' to hold f temporarily. t' will be removed
+ // after f is hold by a new tetrahedron in C.
+ maketetrahedron(&faketet);
+ setorg(faketet, org(neightet));
+ setdest(faketet, dest(neightet));
+ setapex(faketet, apex(neightet));
+ setoppo(faketet, (point) NULL); // Indicates it is 'fake'.
+ // Bond t' to a subface if it exists.
+ tspivot(neightet, worksh);
+ if (worksh.sh != dummysh) {
+ sesymself(worksh);
+ tsbond(faketet, worksh);
+ }
+ // We bond t and t' together. So we're able to find t' and remove it.
+ bond(faketet, neightet);
+ // 'neightet' may become uninfected due to the bond().
+ infect(neightet);
+ frontlink->add(&faketet);
+ } else {
+ frontlink->add(&casingtet);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// delaunizevertices() Create a DT of a set of vertices. //
+// //
+// The routine constructs a Delaunay tetrahedralization of a set of vertices //
+// by the incrmental-flip algorithm. 'floorptlist' and 'ceilptlist' form the //
+// set of vertices. Any vertex of 'ceilptlist' is not coplanar with all //
+// verrices of 'floorptlist', i.e., the initial DT can be quickly setup. //
+// 'newtetlink' returns all tetrahedra of the DT. //
+// //
+// The tetrahedra of the DT are created directly in the pool 'tetrahedrons', //
+// i.e., no auxiliary data structure and memory are required. The trick is //
+// at the time they're created, there are no connections between them to the //
+// other tetrahedra in the pool. You can imagine there is an ioslated island //
+// in the whole DT. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+delaunizevertices(list* floorptlist, list* ceilptlist, link* newtetlink,
+ int* worklist)
+{
+ queue *flipqueue;
+ link *ptlink, *hulllink;
+ triface starttet, neightet;
+ triface newtet, bakhulltet;
+ point pa, pb, pc, pd;
+ point ptloop;
+ enum insertsiteresult success;
+ REAL ori;
+ long bakhullsize;
+ int i;
+
+ // Initialize 'ptlink'.
+ ptlink = new link(sizeof(point), NULL, 256);
+ // Initialize 'hulllink' used in inserthullsite().
+ hulllink = new link(sizeof(triface), NULL, 256);
+ // Initialize flipqueue;
+ flipqueue = new queue(sizeof(badface));
+ // The incremental-flip routines are reused. Backup global variables.
+ decode(dummytet[0], bakhulltet);
+ bakhullsize = hullsize;
+ // Decrease the debug level.
+ b->verbose--;
+
+ // Create an initial tetrahedralization containing only one tetrahedron
+ // formed by a (floor) subface and a (ceil) point.
+ pa = * (point *)(* floorptlist)[0];
+ pb = * (point *)(* floorptlist)[1];
+ pc = * (point *)(* floorptlist)[2];
+ pd = * (point *)(* ceilptlist)[0];
+ // Adjust the orientation.
+ ori = orient3d(pa, pb, pc, pd);
+ assert(ori != 0.0);
+ if (ori > 0) {
+ ptloop = pa; pa = pb; pb = ptloop;
+ }
+ // Create the tetrahedron with corners pa, pb, pc and pd.
+ maketetrahedron(&newtet);
+ setorg(newtet, pa);
+ setdest(newtet, pb);
+ setapex(newtet, pc);
+ setoppo(newtet, pd);
+ // Bond to 'dummytet' for point location.
+ dummytet[0] = encode(newtet);
+ // At init, all faces of this tet are hull faces.
+ hullsize = 4;
+
+ // Put the rest of points into 'ptlink'.
+ for (i = 3; i < floorptlist->len(); i++) {
+ ptlink->add((point *)(* floorptlist)[i]);
+ }
+ for (i = 1; i < ceilptlist->len(); i++) {
+ ptlink->add((point *)(* ceilptlist)[i]);
+ }
+
+ // Insert the rest of points of 'ptlink' into D.
+ for (i = 0; i < ptlink->len(); i++) {
+ ptloop = * (point *) ptlink->getnitem(i + 1);
+ // Try to insert the point first.
+ starttet.tet = dummytet; // Don't use locate().
+ success = insertsite(ptloop, &starttet, false, flipqueue);
+ assert(success != DUPLICATEPOINT);
+ if (success == OUTSIDEPOINT) {
+ // Point locates outside the convex hull. Mount it.
+ inserthullsite(ptloop, &starttet, flipqueue, hulllink, worklist);
+ }
+ // Call flip algorithm to recover Delaunayness.
+ flip(flipqueue, NULL, false, false, false);
+ }
+
+ // Have created the D. Gather the all new tetrahedra of D.
+ decode(dummytet[0], starttet);
+ infect(starttet);
+ newtetlink->add(&starttet);
+ for (i = 0; i < newtetlink->len(); i++) {
+ starttet = * (triface *) newtetlink->getnitem(i + 1);
+ for (starttet.loc = 0; starttet.loc < 4; starttet.loc++) {
+ sym(starttet, neightet);
+ if ((neightet.tet != dummytet) && !infected(neightet)) {
+ infect(neightet);
+ newtetlink->add(&neightet);
+ }
+ }
+ }
+ // Uninfect them.
+ for (i = 0; i < newtetlink->len(); i++) {
+ starttet = * (triface *) newtetlink->getnitem(i + 1);
+ assert(infected(starttet));
+ uninfect(starttet);
+ }
+
+ // Restore global variables.
+ dummytet[0] = encode(bakhulltet);
+ hullsize = bakhullsize;
+ // Increase the debug level.
+ b->verbose++;
+
+ delete hulllink;
+ delete ptlink;
+ delete flipqueue;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// identifyfronts() Identify faces of a cavity in a DT. //
+// //
+// 'frontlink' is a list of faces bounded the cavity C. The tetrahedra of D //
+// are saved in 'newtetlink'. This routine idnetifies each face of C in D. //
+// 'newfrontlink' saves the identified fronts in D corresponding to those of //
+// 'frontlink'. Fronts saved in 'missceillist' are missing from D. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+identifyfronts(link* frontlink, link* newtetlink, link* newfrontlink,
+ list* missceillist)
+{
+ triface front, starttet, spintet;
+ face checksh;
+ point pa, pb, pc;
+ enum locateresult loc;
+ enum finddirectionresult col;
+ int hitbdry;
+ int i;
+
+ // Get a new tet for starting the search in D.
+ recenttet = * (triface *) newtetlink->getnitem(1);
+
+ // Identify the cavity faces in D.
+ for (i = 0; i < frontlink->len(); i++) {
+ // Get a cavity face f.
+ front = * (triface *) frontlink->getnitem(i + 1);
+ pa = org(front);
+ pb = dest(front);
+ pc = apex(front);
+ if (b->verbose > 2) {
+ printf(" Identifying front (%d, %d, %d).\n", pointmark(pa),
+ pointmark(pb), pointmark(pc));
+ }
+ // Search for a tetrahedron containing vertex pa.
+ starttet = recenttet;
+ loc = preciselocate(pa, &starttet);
+ assert(loc == ONVERTEX);
+ // Search for a tetrahedron containing edge (pa, pb).
+ col = finddirection(&starttet, pb);
+ if (col == RIGHTCOLLINEAR) {
+ // pb is just the destination.
+ } else if (col == LEFTCOLLINEAR) {
+ enext2self(starttet);
+ esymself(starttet);
+ } else if (col == TOPCOLLINEAR) {
+ fnextself(starttet);
+ enext2self(starttet);
+ esymself(starttet);
+ }
+ if (dest(starttet) != pb) {
+ // edge (pa, pb) doesn't exist. Front is missing.
+ if (b->verbose > 2) {
+ printf(" Edge (%d, %d, %d) not exists.\n", pointmark(pa),
+ pointmark(pb), pointmark(pc));
+ }
+ // Get the tet inside the cavity C.
+ symself(front);
+ assert((front.tet != dummytet) && infected(front));
+ // Put it into 'missceillist'.
+ missceillist->append(&front);
+ continue;
+ }
+ // Search for a tetrahedron containing face (pa, pb, pc).
+ spintet = starttet;
+ hitbdry = 0;
+ do {
+ if (apex(spintet) == pc) {
+ // Find. The edge direction of 'spintet' may be reversed because of
+ // the hitting of boundary. Check it.
+ if (org(spintet) != pa) {
+ esymself(spintet);
+ }
+ starttet = spintet;
+ break;
+ }
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ if (hitbdry < 2) {
+ esym(starttet, spintet);
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ }
+ }
+ }
+ if (apex(spintet) == apex(starttet)) break;
+ } while (hitbdry < 2);
+ if (apex(starttet) != pc) {
+ // Face (pa, pb, pc) doesn't exist.
+ if (b->verbose > 2) {
+ printf(" Face (%d, %d, %d) not exists.\n", pointmark(pa),
+ pointmark(pb), pointmark(pc));
+ }
+ // Get the tet inside the cavity C.
+ symself(front);
+ assert((front.tet != dummytet) && infected(front));
+ // Put it into 'missceillist'.
+ missceillist->append(&front);
+ continue;
+ }
+ // Save the handle for the next searching.
+ recenttet = starttet;
+ // Front is identified. Save the newfront.
+ newfrontlink->add(&starttet);
+ }
+
+ if (missceillist->len() > 0) {
+ // Fail to classify all fronts. Delete the new tets.
+ for (i = 0; i < newtetlink->len(); i++) {
+ starttet = * (triface *) newtetlink->getnitem(i + 1);
+ tetrahedrondealloc(starttet.tet);
+ }
+ newtetlink->clear();
+ newfrontlink->clear();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// classifynewtets() Classify new tets of D to be "inside" ot "outside". //
+// //
+// 'frontlink' is a list of faces bounded the cavity C. The tetrahedra of D //
+// are saved in 'newtetlink'. 'newfrontlink' is the list of identified faces //
+// in D corresponding to 'frontlink'. //
+// //
+// For each identified face f, do the following: (1) Identify the inside and //
+// outside of f and mark (infect) the outside tet (if it exists) for removal.//
+// (2) Insert an auxilary subface s at f. s is simultaneously referenced by //
+// several tets that hold f: t1 - the tet not in D, t2 - the tet inside C, //
+// and t3 - the tet outside C (if it exists). However s only points to t1 ( //
+// i.e., the tet not in D). It servers the link to bond t1 and t2 together //
+// later. If f is a subface, it is inserted directly. Otherwise, create and //
+// insert a 'fake' subface at f. It will be removed later. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+classifynewtets(link* frontlink, link* newtetlink, link* newfrontlink)
+{
+ triface front, newfront, neightet;
+ face checksh;
+ point pa, pb, pc, pd;
+ REAL ori;
+ int i;
+
+ assert(frontlink->len() == newfrontlink->len());
+ for (i = 0; i < frontlink->len(); i++) {
+ // Get a cavity face f.
+ front = * (triface *) frontlink->getnitem(i + 1);
+ // Let f face toward insde of the cavity. Since f is a face of tet
+ // adjacent to C. Hence choose the CW direction of f.
+ adjustedgering(front, CW);
+ pa = org(front);
+ pb = dest(front);
+ pc = apex(front);
+ // Get the correspond f in D.
+ newfront = * (triface *) newfrontlink->getnitem(i + 1);
+ // newfront may not the inside tet. Adjust it to be the inside one.
+ pd = oppo(newfront);
+ ori = orient3d(pa, pb, pc, pd);
+ assert(ori != 0.0);
+ if (ori > 0.0) {
+ symself(newfront);
+ assert(newfront.tet != dummytet);
+ }
+ // Insert an auxilary subface s at the place.
+ // Is there already a subface?
+ tspivot(front, checksh);
+ if (checksh.sh == dummysh) {
+ // No. Create a 'fake' subface. It has no vertices.
+ makeshellface(subfaces, &checksh);
+ // Bond s and front (t1) together.
+ tsbond(front, checksh);
+ }
+ // Bond s to newfront (t2) but not vice versa.
+ sesymself(checksh);
+ newfront.tet[8 + newfront.loc] = (tetrahedron) sencode(checksh);
+ // Does the neighbor (t3) of newfront exists?
+ sym(newfront, neightet);
+ if (neightet.tet != dummytet) {
+ // Bond s to neightet (t3) but not vice versa.
+ sesymself(checksh);
+ neightet.tet[8 + neightet.loc] = (tetrahedron) sencode(checksh);
+ // Mark it to be "outside".
+ infect(neightet);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// carvecavity() Remove redundant (outside) tetrahedra from DT. //
+// //
+// All faces of the cavity C have been identified and protected by subfaces //
+// (may be faked) in DT. It's time to remove the outside tetrahedra and fill //
+// the remaining (inside) tetrahedra into the CDT. //
+// //
+// Notice that the "outside" tets may not only the tets on the convex hull //
+// but also tets inside the D - there is a "hole" in D. Since we have marked //
+// all outside tets during identifycavity(). The hole tets are poped up and //
+// are removed too. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::carvecavity(link* newtetlink, list* newtetlist)
+{
+ triface starttet, neightet, front;
+ face checksh, frontsh;
+ point pointptr;
+ int i;
+
+ newtetlist->clear();
+ // Some outside tets have been infected. Save them in 'newtetlist'.
+ for (i = 0; i < newtetlink->len(); i++) {
+ starttet = * (triface *) newtetlink->getnitem(i + 1);
+ if (infected(starttet)) {
+ newtetlist->append(&starttet);
+ }
+ }
+ // Find and infect the rest of "outside" tetrahedra.
+ for (i = 0; i < newtetlist->len(); i++) {
+ starttet = * (triface *)(* newtetlist)[i];
+ assert(infected(starttet));
+ for (starttet.loc = 0; starttet.loc < 4; starttet.loc++) {
+ sym(starttet, neightet);
+ // Is neighbor exists and uninfected?
+ if ((neightet.tet != dummytet) && !infected(neightet)) {
+ // Yes. Is it protected by a subface?
+ tspivot(starttet, checksh);
+ if (checksh.sh == dummysh) {
+ // No. It's an outside tet. Infect and save it.
+ infect(neightet);
+ newtetlist->append(&neightet);
+ }
+ }
+ }
+ }
+ // Now remove the outside (and hole) tets.
+ for (i = 0; i < newtetlink->len(); i++) {
+ starttet = * (triface *) newtetlink->getnitem(i + 1);
+ if (infected(starttet)) {
+ // starttet is an "outside" tet.
+ for (starttet.loc = 0; starttet.loc < 4; starttet.loc++) {
+ // Is there a subface f?
+ tspivot(starttet, checksh);
+ if (checksh.sh != dummysh) {
+ sym(starttet, neightet);
+ // neightet must be an "inside" tet.
+ assert(!infected(neightet));
+ // Detach starttet from neightet.
+ dissolve(neightet);
+ }
+ }
+ // Dealloc the tet.
+ tetrahedrondealloc(starttet.tet);
+ // Remove the tet from newtetlink.
+ newtetlink->del(i + 1);
+ i--;
+ }
+ }
+ // Clear the newtetlist for returning the inside tets.
+ newtetlist->clear();
+
+ // Now fill the inside tets into C. Remove fake subfaces and tets too.
+ for (i = 0; i < newtetlink->len(); i++) {
+ starttet = * (triface *) newtetlink->getnitem(i + 1);
+ // Fill it into C.
+ for (starttet.loc = 0; starttet.loc < 4; starttet.loc++) {
+ // Is there a subface f?
+ tspivot(starttet, checksh);
+ if (checksh.sh != dummysh) {
+ // Yes. Find the tet holds f.
+ sesym(checksh, frontsh);
+ stpivot(frontsh, front);
+ assert((front.tet != dummytet) && !infected(front));
+ // Either front or f may be fake, and can be both.
+ if (sorg(checksh) == (point) NULL) {
+ // Detach the fake subface from front and starttet.
+ tsdissolve(front);
+ tsdissolve(starttet);
+ // Delete the fake subface.
+ shellfacedealloc(subfaces, checksh.sh);
+ } else {
+ // Bond starttet to f.
+ tsbond(starttet, checksh);
+ }
+ if (oppo(front) == (point) NULL) {
+ // Detach the fake tet from this side.
+ if (!isdead(&frontsh)) {
+ stdissolve(frontsh);
+ }
+ // Dealloc the fake tet.
+ tetrahedrondealloc(front.tet);
+ // This side becomes a hull. let 'dummytet' bond to it.
+ dummytet[0] = encode(starttet);
+ } else {
+ // Bond front and starttet, also dissove the old bond in them.
+ bond(starttet, front);
+ }
+ }
+ }
+ // Add it to the return list.
+ starttet.loc = 0;
+ newtetlist->append(&starttet);
+ // Let the corners of starttet point to it for point searching.
+ pointptr = org(starttet);
+ setpoint2tet(pointptr, encode(starttet));
+ pointptr = dest(starttet);
+ setpoint2tet(pointptr, encode(starttet));
+ pointptr = apex(starttet);
+ setpoint2tet(pointptr, encode(starttet));
+ pointptr = oppo(starttet);
+ setpoint2tet(pointptr, encode(starttet));
+ }
+ // The cavity has been re-tetrahedralized.
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// delaunizecavity() Triangulate a cavity by delaunizing its vertices. //
+// //
+// The cavity C is bounded by a set of triangles in 'floorlist' (a list of //
+// coplanar subfaces) and 'ceillist' (a list of tetrahedral faces lie above //
+// the subfaces). 'floorptlist' and 'ceilptlist' are vertices of 'floorlist' //
+// and 'ceillist', respectively. They form the set of vertices of C. //
+// //
+// The algorithm is simply desribed as follows: first form a Delaunay tetra- //
+// hedralization D from the set of vertices of C; then mark each tetrahedron //
+// of D to be "inside" and "outside"; finally, remove all tetrahedra marked //
+// as "outside". //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+delaunizecavity(list* floorlist, list* ceillist, list* floorptlist,
+ list* ceilptlist, list* newtetlist, list* missceillist,
+ int* worklist)
+{
+ link *frontlink, *newtetlink, *newfrontlink;
+
+ if (b->verbose > 1) {
+ printf(" Delaunizing cavity (%d floors, %d ceilings, %d vertices).\n",
+ floorlist->len(), ceillist->len(), floorptlist->len() +
+ ceilptlist->len());
+ }
+
+ // Save the size of the largest cavity.
+ if ((floorlist->len() + ceillist->len()) > maxcavfaces) {
+ maxcavfaces = floorlist->len() + ceillist->len();
+ }
+ if (floorptlist->len() + ceilptlist->len() > maxcavverts) {
+ maxcavverts = floorptlist->len() + ceilptlist->len();
+ }
+
+ frontlink = new link(sizeof(triface), NULL, 256);
+ newtetlink = new link(sizeof(triface), NULL, 256);
+ newfrontlink = new link(sizeof(triface), NULL, 256);
+
+ // Initialize the cavity C.
+ initializecavity(floorlist, ceillist, frontlink);
+ // Form the D of the vertices of C.
+ delaunizevertices(floorptlist, ceilptlist, newtetlink, worklist);
+ // Identify faces of C in D.
+ identifyfronts(frontlink, newtetlink, newfrontlink, missceillist);
+ // Is there missing fronts in D?
+ if (missceillist->len() == 0) {
+ // No! Classify "inside" and "outside" tets in D.
+ classifynewtets(frontlink, newtetlink, newfrontlink);
+ // Remove the redundant tets in D and fill the rest to C.
+ carvecavity(newtetlink, newtetlist);
+ }
+
+ delete frontlink;
+ delete newtetlink;
+ delete newfrontlink;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// formmissingregion() Form the missing region. //
+// //
+// 'missingsh' is a missing subface. Start from it we can form the missing //
+// region R. Remember that all missing subfaces have been infected. Other //
+// subfaces of R can be found by checking the neighbors of 'missingsh', and //
+// the neighbors of the neighbors, and so on. Stop checking further if //
+// either a segment or an uninfected subface is poped up. //
+// //
+// 'missingshlist' returns subfaces of R, and these subfaces are oriented in //
+// the same direction. 'equatptlist' returns vertices of R, and each vertex //
+// of R is marked with '1' (in 'worklist'). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+formmissingregion(face* missingsh, list* missingshlist, list* equatptlist,
+ int* worklist)
+{
+ face neighsh, worksh, workseg;
+ point workpt[3];
+ int idx, i, j;
+
+ // Add 'missingsh' into 'missingshlist'.
+ missingshlist->append(missingsh);
+ // Save and mark its three vertices.
+ workpt[0] = sorg(*missingsh);
+ workpt[1] = sdest(*missingsh);
+ workpt[2] = sapex(*missingsh);
+ for (i = 0; i < 3; i++) {
+ idx = pointmark(workpt[i]) - in->firstnumber;
+ worklist[idx] = 1;
+ equatptlist->append(&workpt[i]);
+ }
+ // Temporarily uninfect it (avoid to save it again).
+ suninfect(*missingsh);
+
+ // Find the other missing subfaces.
+ for (i = 0; i < missingshlist->len(); i++) {
+ // Get a missing subface.
+ worksh = * (face *)(* missingshlist)[i];
+ // Check three neighbors of this face.
+ for (j = 0; j < 3; j++) {
+ sspivot(worksh, workseg);
+ if (workseg.sh == dummysh) {
+ spivot(worksh, neighsh);
+ if (sinfected(neighsh)) {
+ // Find a missing subface, adjust the face orientation.
+ if (sorg(neighsh) != sdest(worksh)) {
+ sesymself(neighsh);
+ }
+ if (b->verbose > 2) {
+ printf(" Add missing subface (%d, %d, %d).\n",
+ pointmark(sorg(neighsh)), pointmark(sdest(neighsh)),
+ pointmark(sapex(neighsh)));
+ }
+ missingshlist->append(&neighsh);
+ // Save and mark its apex.
+ workpt[0] = sapex(neighsh);
+ idx = pointmark(workpt[0]) - in->firstnumber;
+ // Has workpt[0] been added?
+ if (worklist[idx] == 0) {
+ worklist[idx] = 1;
+ equatptlist->append(&workpt[0]);
+ }
+ // Temporarily uninfect it (avoid to save it again).
+ suninfect(neighsh);
+ }
+ }
+ senextself(worksh);
+ }
+ }
+
+ // R has been formed. Infect missing subfaces again.
+ for (i = 0; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ sinfect(worksh);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// scoutcrossingedge() Search an edge crossing the missing region. //
+// //
+// 'missingshlist' forms the missing region R. This routine searches for an //
+// edge crossing R. It first forms a 'boundedgelist' consisting of the //
+// boundary edges of R. Such edges are existing in CDT. A crossing edge is //
+// found by rotating faces around one of the boundary edges. It is possible //
+// there is no edge crosses R (e.g. R has a degenerate point set). //
+// //
+// If find a croosing edge, return TRUE, 'crossedgelist' contains this edge. //
+// Otherwise, return FALSE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+scoutcrossingedge(list* missingshlist, list* boundedgelist,
+ list* crossedgelist, int* worklist)
+{
+ triface starttet, spintet, worktet;
+ face startsh, neighsh, worksh, workseg;
+ point torg, tdest, tapex;
+ point workpt[3], pa, pb, pc;
+ enum finddirectionresult collinear;
+ REAL ori1, ori2;
+ bool crossflag;
+ int hitbdry;
+ int i, j, k;
+
+ // Form the 'boundedgelist'. Loop through 'missingshlist', check each
+ // edge of these subfaces. If an edge is a segment or the neighbor
+ // subface is uninfected, add it to 'boundedgelist'.
+ for (i = 0; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ for (j = 0; j < 3; j++) {
+ sspivot(worksh, workseg);
+ if (workseg.sh == dummysh) {
+ spivot(worksh, neighsh);
+ if (!sinfected(neighsh)) {
+ boundedgelist->append(&worksh);
+ }
+ } else {
+ boundedgelist->append(&worksh);
+ }
+ senextself(worksh);
+ }
+ }
+
+ crossflag = false;
+ // Find a crossing edge. It is possible there is no such edge. We need to
+ // loop through all edges of 'boundedgelist' for sure we don't miss any.
+ for (i = 0; i < boundedgelist->len() && !crossflag; i++) {
+ startsh = * (face *)(* boundedgelist)[i];
+ // 'startsh' (abc) holds an existing edge of the DT, find it.
+ torg = sorg(startsh);
+ tdest = sdest(startsh);
+ tapex = sapex(startsh);
+ getsearchtet(torg, tdest, &starttet, &workpt[0]);
+ collinear = finddirection(&starttet, workpt[0]);
+ if (collinear == LEFTCOLLINEAR) {
+ enext2self(starttet);
+ esymself(starttet);
+ } else if (collinear == TOPCOLLINEAR) {
+ fnextself(starttet);
+ enext2self(starttet);
+ esymself(starttet);
+ }
+ assert(dest(starttet) == workpt[0]);
+ // Now starttet holds edge ab. Find is edge de crossing R.
+ spintet = starttet;
+ hitbdry = 0;
+ do {
+ if (fnextself(spintet)) {
+ // splittet = abde. Check if de crosses abc.
+ workpt[1] = apex(spintet); // workpt[1] = d.
+ workpt[2] = oppo(spintet); // workpt[2] = e.
+ j = pointmark(workpt[1]) - in->firstnumber;
+ k = pointmark(workpt[2]) - in->firstnumber;
+ if (worklist[j] == 1) {
+ ori1 = 0.0; // d is a vertex of the missing region.
+ } else {
+ // Get the orientation of d wrt. abc.
+ ori1 = orient3d(torg, tdest, tapex, workpt[1]);
+ }
+ if (worklist[k] == 1) {
+ ori2 = 0.0; // e is a vertex of the missing region.
+ } else {
+ // Get the orientation of e wrt. abc.
+ ori2 = orient3d(torg, tdest, tapex, workpt[2]);
+ }
+ // Only do check if d and e locate on different sides of abc.
+ if (ori1 * ori2 < 0.0) {
+ // Check if de crosses any subface of R.
+ for (j = 0; j < missingshlist->len(); j++) {
+ worksh = * (face *)(* missingshlist)[j];
+ pa = sorg(worksh);
+ pb = sdest(worksh);
+ pc = sapex(worksh);
+ crossflag = (tri_tri_inter(pa, pb, pc, workpt[0], workpt[1],
+ workpt[2]) == INTERSECT);
+ if (crossflag) {
+ // Find a crossing edge. We're done.
+ worktet = spintet;
+ adjustedgering(worktet, CCW);
+ enextfnextself(worktet);
+ enextself(worktet);
+ // Add this edge (worktet) into 'crossedgelist'.
+ crossedgelist->append(&worktet);
+ break;
+ }
+ }
+ if (crossflag) break;
+ }
+ if (apex(spintet) == apex(starttet)) break;
+ } else {
+ hitbdry++;
+ // It is only possible to hit boundary once.
+ if (hitbdry < 2) {
+ esym(starttet, spintet);
+ }
+ }
+ } while (hitbdry < 2);
+ }
+
+ return crossflag;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// rearrangesubfaces() Rearrange the set of subfaces of a missing region //
+// so that they conform to the faces of DT. //
+// //
+// The missing region formed by subfaces of 'missingshlist' contains a set //
+// of degenerate vertices, hence the set of subfaces don't match the set of //
+// faces in DT. Instead of forcing them to present in DT, we re-arrange the //
+// connection of them so that the new subfaces conform to the faces of DT. //
+// 'boundedgelist' is a set of boundary edges of the region, these edges(may //
+// be subsegments) must exist in DT. //
+// //
+// On completion, we have created and inserted a set of new subfaces which //
+// conform to faces of DT. The set of old subfaces in 'missingshlist' are //
+// deleted. The region vertices in 'equatptlist' are unmarked. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+rearrangesubfaces(list* missingshlist, list* boundedgelist, list* equatptlist,
+ int* worklist)
+{
+ link *boundedgelink;
+ link *newshlink;
+ triface starttet, spintet, neightet, worktet;
+ face shloop, newsh, neighsh, spinsh, worksh;
+ face workseg, casingin, casingout;
+ point torg, tdest, workpt;
+ point spt1, spt2, spt3;
+ point liftpoint;
+ enum finddirectionresult collinear;
+ enum shestype shtype;
+ REAL area;
+ bool matchflag, finishflag;
+ int shmark, idx, hitbdry;
+ int i, j;
+
+ // Initialize the boundary edge link.
+ boundedgelink = new link(sizeof(face), NULL, 256);
+ // Initialize the new subface link.
+ newshlink = new link(sizeof(face), NULL, 256);
+ // Remember the type (skinny or not) of replaced subfaces. They should
+ // all have the same type since there is no segment inside the region.
+ worksh = * (face *)(* missingshlist)[0];
+ shtype = shelltype(worksh);
+ // The following loop is only for checking purpose.
+ for (i = 1; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ assert(shelltype(worksh) == shtype);
+ }
+
+ // Create an initial boundary link.
+ for (i = 0; i < boundedgelist->len(); i++) {
+ shloop = * (face *)(* boundedgelist)[i];
+ if (i == 0) {
+ if (b->quality && varconstraint) {
+ // area will be copied to all new created subfaces.
+ area = areabound(shloop);
+ }
+ // 'shmark' will be set to all new created subfaces.
+ shmark = shellmark(shloop);
+ // Get the liftpoint of this facet for later checking.
+ liftpoint = getliftpoint(shmark);
+ }
+ sspivot(shloop, workseg);
+ if (workseg.sh == dummysh) {
+ // This edge is an interior edge.
+ spivot(shloop, neighsh);
+ boundedgelink->add(&neighsh);
+ } else {
+ // This side has a segment, the edge exists.
+ boundedgelink->add(&shloop);
+ }
+ }
+
+ // Each edge ab of boundedgelink will be finished by finding a vertex c
+ // which is a vertex of the missing region, such that:
+ // (1) abc is inside the missing region, i.e., abc intersects at least
+ // one of missing subfaces (saved in missingshlist);
+ // (2) abc is not intersect with any previously created new subfaces
+ // in the missing region (saved in newshlink).
+ // After abc is created, it will be inserted into both the surface mesh
+ // and the DT. The boundedgelink will be updated, ab is removed, bc and
+ // ca will be added if they are open.
+
+ while (boundedgelink->len() > 0) {
+ // Remove an edge (ab) from the link.
+ shloop = * (face *) boundedgelink->del(1);
+ // 'workseg' indicates it is a segment or not.
+ sspivot(shloop, workseg);
+ torg = sorg(shloop); // torg = a;
+ tdest = sdest(shloop); // tdest = b;
+ // Find a tetrahedron containing ab.
+ getsearchtet(torg, tdest, &starttet, &workpt);
+ collinear = finddirection(&starttet, workpt);
+ if (collinear == LEFTCOLLINEAR) {
+ enext2self(starttet);
+ esymself(starttet);
+ } else if (collinear == TOPCOLLINEAR) {
+ fnextself(starttet);
+ enext2self(starttet);
+ esymself(starttet);
+ }
+ assert(dest(starttet) == workpt);
+ // Checking faces around ab until a valid face is found.
+ matchflag = false;
+ spintet = starttet;
+ hitbdry = 0;
+ do {
+ workpt = apex(spintet);
+ idx = pointmark(workpt) - in->firstnumber;
+ if (worklist[idx] == 1) {
+ // (trog, tdest, workpt) is on the facet. Check if it satisfies (1).
+ finishflag = false;
+ for (i = 0; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ spt1 = sorg(worksh);
+ spt2 = sdest(worksh);
+ spt3 = sapex(worksh);
+ // Does bc intersect the face?
+ if (tri_edge_cop_inter(spt1, spt2, spt3, tdest, workpt, liftpoint)
+ == INTERSECT) {
+ finishflag = true; break;
+ }
+ // Does ca intersect the face?
+ if (tri_edge_cop_inter(spt1, spt2, spt3, workpt, torg, liftpoint)
+ == INTERSECT) {
+ finishflag = true; break;
+ }
+ // Does c inside the face?
+ if (tri_vert_cop_inter(spt1, spt2, spt3, workpt, liftpoint)
+ == INTERSECT) {
+ finishflag = true; break;
+ }
+ }
+ if (finishflag) {
+ // Satisfying (1). Check if it satisfies (2).
+ matchflag = true;
+ for (i = 0; i < newshlink->len() && matchflag; i++) {
+ worksh = * (face *) newshlink->getnitem(i + 1);
+ spt1 = sorg(worksh);
+ spt2 = sdest(worksh);
+ spt3 = sapex(worksh);
+ // Does bc intersect the face?
+ if (tri_edge_cop_inter(spt1, spt2, spt3, tdest, workpt, liftpoint)
+ == INTERSECT) {
+ matchflag = false; break;
+ }
+ // Does ca intersect the face?
+ if (tri_edge_cop_inter(spt1, spt2, spt3, workpt, torg, liftpoint)
+ == INTERSECT) {
+ matchflag = false; break;
+ }
+ // Does c inside the face?
+ if (tri_vert_cop_inter(spt1, spt2, spt3, workpt, liftpoint)
+ == INTERSECT) {
+ matchflag = false; break;
+ }
+ }
+ }
+ if (matchflag == true) {
+ // Satisfying both (1) and (2). Find abc.
+ break;
+ }
+ }
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ if (hitbdry < 2) {
+ esym(starttet, spintet);
+ if (!fnextself(spintet)) {
+ hitbdry ++;
+ }
+ }
+ }
+ } while (hitbdry < 2 && apex(spintet) != apex(starttet));
+ assert(matchflag == true);
+ tspivot(spintet, neighsh);
+ if (neighsh.sh != dummysh) {
+ printf("Error: Invalid PLC.\n");
+ printf(" Facet #%d and facet #%d overlap each other.\n",
+ shellmark(neighsh), shellmark(shloop));
+ printf(" It might be caused by a facet is defined more than once.\n");
+ printf(" Hint: Use -d switch to find all overlapping facets.\n");
+ exit(1);
+ }
+ // The side of 'spintet' is at which a new subface will be attached.
+ adjustedgering(spintet, CCW);
+ // Create the new subface.
+ makeshellface(subfaces, &newsh);
+ setsorg(newsh, org(spintet));
+ setsdest(newsh, dest(spintet));
+ setsapex(newsh, apex(spintet));
+ if (b->quality && varconstraint) {
+ // Copy the areabound into the new subface.
+ setareabound(newsh, area);
+ }
+ setshellmark(newsh, shmark);
+ setshelltype(newsh, shtype); // It may be a skinny subface.
+ // Add newsh into newshlink for intersecting checking.
+ newshlink->add(&newsh);
+ // Insert it into the current mesh.
+ tsbond(spintet, newsh);
+ sym(spintet, neightet);
+ if (neightet.tet != dummytet) {
+ sesym(newsh, neighsh);
+ tsbond(neightet, neighsh);
+ }
+ // Insert it into the surface mesh.
+ sspivot(shloop, workseg);
+ if (workseg.sh == dummysh) {
+ sbond(shloop, newsh);
+ } else {
+ // There is a subsegment, 'shloop' is the subface which is going to
+ // die. Insert the 'newsh' at the place of 'shloop' into its face
+ // link, so as to dettach 'shloop'. The original connection is:
+ // -> casingin -> shloop -> casingout ->, it will be changed with:
+ // -> casingin -> newsh -> casingout ->. Pay attention to the
+ // case when this subsegment is dangling in the mesh, i.e., 'shloop'
+ // is bonded to itself.
+ spivot(shloop, casingout);
+ if (shloop.sh != casingout.sh) {
+ // 'shloop' is not bonded to itself.
+ spinsh = casingout;
+ do {
+ casingin = spinsh;
+ spivotself(spinsh);
+ } while (sapex(spinsh) != sapex(shloop));
+ assert(casingin.sh != shloop.sh);
+ // Bond casingin -> newsh -> casingout.
+ sbond1(casingin, newsh);
+ sbond1(newsh, casingout);
+ } else {
+ // Bond newsh -> newsh.
+ sbond(newsh, newsh);
+ }
+ // Bond the segment.
+ ssbond(newsh, workseg);
+ }
+ // Check other two sides of this new subface. If a side is not bonded
+ // to any edge in the link, it will be added to the link.
+ for (i = 0; i < 2; i++) {
+ if (i == 0) {
+ senext(newsh, worksh);
+ } else {
+ senext2(newsh, worksh);
+ }
+ torg = sorg(worksh);
+ tdest = sdest(worksh);
+ finishflag = false;
+ for (j = 0; j < boundedgelink->len() && !finishflag; j++) {
+ neighsh = * (face *) boundedgelink->getnitem(j + 1);
+ if ((sorg(neighsh) == torg && sdest(neighsh) == tdest) ||
+ (sorg(neighsh) == tdest && sdest(neighsh) == torg)) {
+ // Find a boundary edge. Bond them and exit the loop.
+ sspivot(neighsh, workseg);
+ if (workseg.sh == dummysh) {
+ sbond(neighsh, worksh);
+ } else {
+ // There is a subsegment, 'neighsh' is the subface which is
+ // going to die. Do the same as above for 'worksh'.
+ spivot(neighsh, casingout);
+ if (neighsh.sh != casingout.sh) {
+ // 'neighsh' is not bonded to itself.
+ spinsh = casingout;
+ do {
+ casingin = spinsh;
+ spivotself(spinsh);
+ } while (sapex(spinsh) != sapex(neighsh));
+ assert(casingin.sh != neighsh.sh);
+ // Bond casingin -> worksh -> casingout.
+ sbond1(casingin, worksh);
+ sbond1(worksh, casingout);
+ } else {
+ // Bond worksh -> worksh.
+ sbond(worksh, worksh);
+ }
+ // Bond the segment.
+ ssbond(worksh, workseg);
+ }
+ // Remove this boundary edge from the link.
+ boundedgelink->del(j + 1);
+ finishflag = true;
+ }
+ }
+ if (!finishflag) {
+ // It's a new boundary edge, add it to link.
+ boundedgelink->add(&worksh);
+ }
+ }
+ }
+
+ // Deallocate the set of old missing subfaces.
+ for (i = 0; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ shellfacedealloc(subfaces, worksh.sh);
+ }
+ // Unmark region vertices in 'worklist'.
+ for (i = 0; i < equatptlist->len(); i++) {
+ workpt = * (point *)(* equatptlist)[i];
+ idx = pointmark(workpt) - in->firstnumber;
+ worklist[idx] = 0;
+ }
+
+ delete boundedgelink;
+ delete newshlink;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// formcavity() Form the cavity for recovering missing subfaces. //
+// //
+// The cavity C is bounded by faces of current CDT. All tetrahedra inside C //
+// will be removed, intead a set of constrained Delaunay tetrahedra will be //
+// filled in and the missing subfaces are respected. //
+// //
+// 'missingshlist' contains a set of subfaces forming the missing region R. //
+// C is formed by first finding all the tetrahedra in CDT that intersect the //
+// relative interior of R; then deleting them from the CDT, this will form C //
+// inside the CDT. At the beginning, 'crossedgelist' contains an edge which //
+// is crossing R. All tets containing this edge must cross R. Start from it, //
+// other crossing edges can be found incrementally. The discovered crossing //
+// tets are saved in 'crosstetlist'. //
+// //
+// Notice that not all tets in 'crosstetlist' are crossing R. The discovered //
+// tets are connected each other. However, there may be other tets crossing //
+// R but disjoint with the found tets. Due to this fact we need to check the //
+// 'missingshlist' once more. Only recover those subfaces which are crossed //
+// by the set of discovered tets, i.e., R may be shrinked to conform the set //
+// of discovered tets. The extra subfaces of R will be recovered later. //
+// //
+// Notice that some previous recovered subfaces may completely included in C.//
+// This can happen when R is very big and these subfaces lie above R and so //
+// close to it. Such subfaces have to be queued (and sinfected()) to recover //
+// them later. Otherwise, we lost the connection to these subfaces forever. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+formcavity(list* missingshlist, list* crossedgelist, list* equatptlist,
+ list* crossshlist, list* crosstetlist, list* belowfacelist,
+ list* abovefacelist, list* horizptlist, list* belowptlist,
+ list* aboveptlist, queue* missingshqueue, int* worklist)
+{
+ triface starttet, spintet, neightet, worktet;
+ face startsh, neighsh, worksh, workseg;
+ point torg, tdest, tapex, workpt[3];
+ REAL checksign, orgori, destori;
+ bool crossflag, inlistflag;
+ bool belowflag, aboveflag;
+ int idx, share;
+ int i, j, k;
+
+ // Get a face at horizon.
+ startsh = * (face *)(* missingshlist)[0];
+ torg = sorg(startsh);
+ tdest = sdest(startsh);
+ tapex = sapex(startsh);
+
+ // Collect the set of crossing tetrahedra by rotating crossing edges.
+ for (i = 0; i < crossedgelist->len(); i++) {
+ // Get a tet abcd, ab is a crossing edge.
+ starttet = * (triface *)(* crossedgelist)[i];
+ adjustedgering(starttet, CCW);
+ if (b->verbose > 2) {
+ printf(" Collect tets containing edge (%d, %d).\n",
+ pointmark(org(starttet)), pointmark(dest(starttet)));
+ }
+ orgori = orient3d(torg, tdest, tapex, org(starttet));
+ destori = orient3d(torg, tdest, tapex, dest(starttet));
+ assert(orgori * destori < 0.0);
+ spintet = starttet;
+ do {
+ // The face rotation should not meet boundary.
+ fnextself(spintet);
+ // Check the validity of the PLC.
+ tspivot(spintet, worksh);
+ if (worksh.sh != dummysh) {
+ printf("Error: Invalid PLC.\n");
+ printf(" Two subfaces (%d, %d, %d) and (%d, %d, %d)\n",
+ pointmark(torg), pointmark(tdest), pointmark(tapex),
+ pointmark(sorg(worksh)), pointmark(sdest(worksh)),
+ pointmark(sapex(worksh)));
+ printf(" are found intersecting each other.\n");
+ printf(" Hint: Use -d switch to find all intersecting facets.\n");
+ exit(1);
+ }
+ if (!infected(spintet)) {
+ if (b->verbose > 2) {
+ printf(" Add crossing tet (%d, %d, %d, %d).\n",
+ pointmark(org(spintet)), pointmark(dest(spintet)),
+ pointmark(apex(spintet)), pointmark(oppo(spintet)));
+ }
+ infect(spintet);
+ crosstetlist->append(&spintet);
+ }
+ // Check whether other two edges of 'spintet' is a crossing edge.
+ // It can be quickly checked from the apex of 'spintet', if it is
+ // not on the facet, then there exists a crossing edge.
+ workpt[0] = apex(spintet);
+ idx = pointmark(workpt[0]) - in->firstnumber;
+ if (worklist[idx] != 1) {
+ // Either edge (dest, apex) or edge (apex, org) crosses.
+ checksign = orient3d(torg, tdest, tapex, workpt[0]);
+ assert(checksign != 0.0);
+ if (checksign * orgori < 0.0) {
+ enext2(spintet, worktet); // edge (apex, org).
+ workpt[1] = org(spintet);
+ } else {
+ assert(checksign * destori < 0.0);
+ enext(spintet, worktet); // edge (dest, apex).
+ workpt[1] = dest(spintet);
+ }
+ // 'worktet' represents the crossing edge. Add it into list only
+ // it doesn't exist in 'crossedgelist'.
+ inlistflag = false;
+ for (j = 0; j < crossedgelist->len() && !inlistflag; j++) {
+ neightet = * (triface *)(* crossedgelist)[j];
+ if (org(neightet) == workpt[0]) {
+ if (dest(neightet) == workpt[1]) inlistflag = true;
+ } else if (org(neightet) == workpt[1]) {
+ if (dest(neightet) == workpt[0]) inlistflag = true;
+ }
+ }
+ if (!inlistflag) {
+ crossedgelist->append(&worktet);
+ }
+ }
+ } while (apex(spintet) != apex(starttet));
+ }
+
+ // Identifying the boundary faces and vertices of C. Sort them into
+ // 'abovefacelist', 'aboveptlist, 'belowfacelist', and 'belowptlist',
+ // respectively. "above" and "below" are wrt.(torg, tdest, tapex).
+ for (i = 0; i < crosstetlist->len(); i++) {
+ // Get a tet abcd, ab is the crossing edge.
+ starttet = * (triface *)(* crosstetlist)[i];
+ assert(infected(starttet));
+ adjustedgering(starttet, CCW);
+ // abc and abd are sharing the crossing edge, the two neighbors must
+ // be crossing tetrahedra too. They can't be boundaries of C.
+ for (j = 0; j < 2; j++) {
+ if (j == 0) {
+ enextfnext(starttet, worktet); // Check bcd.
+ } else {
+ enext2fnext(starttet, worktet); // Check acd.
+ }
+ sym(worktet, neightet);
+ // If the neighbor doesn't exist or exists but doesn't be infected,
+ // it's a boundary face of C, save it.
+ if ((neightet.tet == dummytet) || !infected(neightet)) {
+ workpt[0] = org(worktet);
+ workpt[1] = dest(worktet);
+ workpt[2] = apex(worktet);
+ belowflag = aboveflag = false;
+ share = 0;
+ for (k = 0; k < 3; k++) {
+ idx = pointmark(workpt[k]) - in->firstnumber;
+ if (worklist[idx] == 0) {
+ // It's not a vertices of facet, find which side it lies.
+ checksign = orient3d(torg, tdest, tapex, workpt[k]);
+ assert(checksign != 0.0);
+ if (checksign > 0.0) {
+ // It lies "below" the facet wrt. 'startsh'.
+ worklist[idx] = 2;
+ belowptlist->append(&workpt[k]);
+ } else if (checksign < 0.0) {
+ // It lies "above" the facet wrt. 'startsh'.
+ worklist[idx] = 3;
+ aboveptlist->append(&workpt[k]);
+ }
+ }
+ if (worklist[idx] == 2) {
+ // This face lies "below" the facet wrt. 'startsh'.
+ belowflag = true;
+ } else if (worklist[idx] == 3) {
+ // This face lies "above" the facet wrt. 'startsh'.
+ aboveflag = true;
+ } else {
+ // In degenerate case, this face may just be the equator.
+ assert(worklist[idx] == 1);
+ share++;
+ }
+ }
+ // The degenerate case has been ruled out.
+ assert(share < 3);
+ // Only one flag is possible for a cavity face.
+ assert(belowflag ^ aboveflag);
+ if (belowflag) {
+ belowfacelist->append(&worktet);
+ } else if (aboveflag) {
+ abovefacelist->append(&worktet);
+ }
+ }
+ }
+ }
+
+ // Shrink R if not all its subfaces are crossing by the discovered tets.
+ // 'crossshlist' and 'horizptlist' represent the set of subfaces and
+ // vertices of the shrinked missing region, respectively.
+ for (i = 0; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ assert(sinfected(worksh));
+ workpt[0] = sorg(worksh);
+ workpt[1] = sdest(worksh);
+ workpt[2] = sapex(worksh);
+ crossflag = false;
+ for (j = 0; j < crosstetlist->len() && !crossflag; j++) {
+ // Get a tet abcd, ab is a crossing edge.
+ starttet = * (triface *)(* crosstetlist)[j];
+ adjustedgering(starttet, CCW);
+ // Only need to check two sides of worktet.
+ for (k = 0; k < 2 && !crossflag; k++) {
+ if (k == 0) {
+ worktet = starttet; // Check abc.
+ } else {
+ fnext(starttet, worktet); // Check abd.
+ }
+ crossflag = tritritest(&worktet, workpt[0], workpt[1], workpt[2]);
+ }
+ }
+ if (crossflag) {
+ // 'worksh' is crossed by 'worktet', uninfect it.
+ suninfect(worksh);
+ crossshlist->append(&worksh);
+ // Add its corners into 'horizptlist'.
+ for (k = 0; k < 3; k++) {
+ idx = pointmark(workpt[k]) - in->firstnumber;
+ if (worklist[idx] != 4) {
+ worklist[idx] = 4;
+ horizptlist->append(&workpt[k]);
+ }
+ }
+ }
+ }
+
+ // Check 'crossingtetlist'. Queue subfaces inside them.
+ for (i = 0; i < crosstetlist->len(); i++) {
+ starttet = * (triface *)(* crosstetlist)[i];
+ for (starttet.loc = 0; starttet.loc < 4; starttet.loc++) {
+ sym(starttet, neightet);
+ // If the neighbor exist and is infected, check it.
+ if ((neightet.tet != dummytet) && infected(neightet)) {
+ tspivot(starttet, worksh);
+ if (worksh.sh != dummysh) {
+ // Temporarily remove worksh. Make it missing. recover it later.
+ if (b->verbose > 2) {
+ printf(" Queuing subface (%d, %d, %d).\n",
+ pointmark(sorg(worksh)), pointmark(sdest(worksh)),
+ pointmark(sapex(worksh)));
+ }
+ tsdissolve(neightet);
+ tsdissolve(starttet);
+ // Detach tets at the both sides of this subface.
+ stdissolve(worksh);
+ sesymself(worksh);
+ stdissolve(worksh);
+ sinfect(worksh);
+ missingshqueue->push(&worksh);
+ }
+ }
+ }
+ }
+
+ // Clear flags set in 'worklist'.
+ for (i = 0; i < equatptlist->len(); i++) {
+ workpt[0] = * (point *)(* equatptlist)[i];
+ idx = pointmark(workpt[0]) - in->firstnumber;
+ assert((worklist[idx] == 1) || (worklist[idx] == 4));
+ worklist[idx] = 0;
+ }
+ for (i = 0; i < belowptlist->len(); i++) {
+ workpt[0] = * (point *)(* belowptlist)[i];
+ idx = pointmark(workpt[0]) - in->firstnumber;
+ assert(worklist[idx] == 2);
+ worklist[idx] = 0;
+ }
+ for (i = 0; i < aboveptlist->len(); i++) {
+ workpt[0] = * (point *)(* aboveptlist)[i];
+ idx = pointmark(workpt[0]) - in->firstnumber;
+ assert(worklist[idx] == 3);
+ worklist[idx] = 0;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// enlargecavity() Enlarge the cavity by expanding the faces on ceil. //
+// //
+// 'missceillist' contains missing faces of the cavity C in D. These faces //
+// will be removed from 'ceillist', instead new faces will be added. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+enlargecavity(list* missceillist, list* ceillist, list* ceilptlist,
+ list* floorptlist, list* crosstetlist, queue* missingshqueue,
+ int* worklist)
+{
+ triface missceil, neightet, newceil;
+ triface neineitet, worktet;
+ face checksh;
+ point pd;
+ int i, j, k;
+
+ if (b->verbose > 1) {
+ printf(" Enlarge cavity (%d missing faces).\n", missceillist->len());
+ }
+
+ // Increase the number of enlarged cavities.
+ enlcavtimes++;
+
+ // Mark all vertices in 'floorptlist'.
+ for (i = 0; i < floorptlist->len(); i++) {
+ pd = * (point *)(* floorptlist)[i];
+ worklist[pointmark(pd)] = 1;
+ }
+ // Mark all vertices in 'ceilptlist'.
+ for (i = 0; i < ceilptlist->len(); i++) {
+ pd = * (point *)(* ceilptlist)[i];
+ worklist[pointmark(pd)] = 2;
+ }
+
+ // Loop through 'missceillist'.
+ for (i = 0; i < missceillist->len(); i++) {
+ // Get a missing front f.
+ missceil = * (triface *)(* missceillist)[i];
+ // f is the face of a tet inside C.
+ assert(infected(missceil));
+ // f is no longer a front face, delete it from 'ceillist'.
+ for (j = 0; j < ceillist->len(); j++) {
+ worktet = * (triface *)(* ceillist)[j];
+ if ((missceil.tet == worktet.tet) && (missceil.loc == worktet.loc)) {
+ ceillist->del(j);
+ break;
+ }
+ }
+ // Get the neighbor tet (adjacent to C) at f.
+ sym(missceil, neightet);
+ // The neighbor may have been added in C.
+ pd = oppo(neightet);
+ // It shouldn't be a 'fake' tet.
+ assert(pd != (point) NULL);
+ j = pointmark(pd);
+ // Is pd in list?
+ if ((worklist[j] != 1) && (worklist[j] != 2)) {
+ // pd is a new ceil point. Add it into 'ceilptlist'.
+ worklist[j] = 2;
+ ceilptlist->append(&pd);
+ }
+ // Is f a subface?
+ tspivot(neightet, checksh);
+ if (checksh.sh != dummysh) {
+ // Temporarily remove checksh. Make it missing. recover it later.
+ if (b->verbose > 2) {
+ printf(" Queuing subface (%d, %d, %d).\n",
+ pointmark(sorg(checksh)), pointmark(sdest(checksh)),
+ pointmark(sapex(checksh)));
+ }
+ tsdissolve(neightet);
+ tsdissolve(missceil);
+ // Detach tets at the both sides of checksh.
+ stdissolve(checksh);
+ sesymself(checksh);
+ stdissolve(checksh);
+ sinfect(checksh);
+ missingshqueue->push(&checksh);
+ }
+ // Enlarge the cavity by adding three sides of the neightet.
+ adjustedgering(neightet, CCW);
+ for (j = 0; j < 3; j++) {
+ fnext(neightet, newceil);
+ sym(newceil, neineitet);
+ // Is neineitet inside C?
+ if (!infected(neineitet)) {
+ // No. newceil becomes a front.
+ ceillist->append(&newceil);
+ } else {
+ // Yes. neineitet is not a front anymore. remove it from ceillist.
+ for (k = 0; k < ceillist->len(); k++) {
+ worktet = * (triface *)(* ceillist)[k];
+ if ((neineitet.tet == worktet.tet) &&
+ (neineitet.loc == worktet.loc)) {
+ ceillist->del(k);
+ break;
+ }
+ }
+ // Is newceil a subface?
+ tspivot(newceil, checksh);
+ if (checksh.sh != dummysh) {
+ // Temporarily remove checksh. Make it missing. recover it later.
+ if (b->verbose > 2) {
+ printf(" Queuing subface (%d, %d, %d).\n",
+ pointmark(sorg(checksh)), pointmark(sdest(checksh)),
+ pointmark(sapex(checksh)));
+ }
+ tsdissolve(neineitet);
+ tsdissolve(newceil);
+ // Detach tets at the both sides of checksh.
+ stdissolve(checksh);
+ sesymself(checksh);
+ stdissolve(checksh);
+ sinfect(checksh);
+ missingshqueue->push(&checksh);
+ }
+ }
+ enextself(neightet);
+ }
+ // neightet may have already been queued.
+ if (!infected(neightet)) {
+ // neightet beomes a cavity tet, will be removed later.
+ infect(neightet);
+ crosstetlist->append(&neightet);
+ }
+ }
+
+ // Unmark all vertices in 'floorptlist'.
+ for (i = 0; i < floorptlist->len(); i++) {
+ pd = * (point *)(* floorptlist)[i];
+ worklist[pointmark(pd)] = 0;
+ }
+ // Unmark all vertices in 'ceilptlist'.
+ for (i = 0; i < ceilptlist->len(); i++) {
+ pd = * (point *)(* ceilptlist)[i];
+ worklist[pointmark(pd)] = 0;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insertallsubfaces() Insert all subfaces, queue missing subfaces. //
+// //
+// Loop through all subfaces, insert each into the DT. If one already exists,//
+// bond it to the tetrahedra having it. Otherwise, it is missing, infect it //
+// and save it in 'missingshqueue'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::insertallsubfaces(queue* missingshqueue)
+{
+ triface searchtet;
+ face subloop;
+
+ searchtet.tet = (tetrahedron *) NULL;
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ if (!insertsubface(&subloop, &searchtet)) {
+ if (b->verbose > 1) {
+ printf(" Queuing subface (%d, %d, %d).\n", pointmark(sorg(subloop)),
+ pointmark(sdest(subloop)), pointmark(sapex(subloop)));
+ }
+ sinfect(subloop);
+ missingshqueue->push(&subloop);
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// constrainedfacets() Recover subfaces in a Delaunay tetrahedralization. //
+// //
+// This routine creates a CDT by incrementally updating a DT D into a CDT T. //
+// The process of recovering facets can be imagined by "merging" the surface //
+// mesh F into D. At the beginning, F and D are completely seperated. Some //
+// faces of them are matching some are not because they are crossed by some //
+// tetrahedra of D. The non-matching subfaces will be forced to appear in T //
+// by locally retetrahedralizing the regions where F and D are intersecting. //
+// //
+// When a subface s of F is found missing in D, probably some other subfaces //
+// near to s are missing too. The set of adjoining coplanar missing faces //
+// forms a missing region R (R may not simply connected). //
+// //
+// There are two possibilities can result a mssing region R: (1) Some edges //
+// of D cross R; (2) No edge of D crosses R, but some faces of D spans R, ie,//
+// D is locally degenerate at R. In case (1), D is modified so that it resp- //
+// ects R (done by a cavity retetrahedralization algorithm). In case (2), F //
+// is modified so that the set of subfaces of R matches faces in D (done by //
+// a face rearrangment algorithm). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::constrainedfacets()
+{
+ queue *missingshqueue;
+ list *missingshlist, *equatptlist;
+ list *boundedgelist, *crossedgelist, *crosstetlist;
+ list *crossshlist, *belowfacelist, *abovefacelist;
+ list *horizptlist, *belowptlist, *aboveptlist;
+ list *newtetlist, *missceillist;
+ triface searchtet, worktet;
+ face subloop, worksh;
+ int *worklist;
+ int i;
+
+ if (!b->quiet) {
+ printf("Constraining facets.\n");
+ }
+
+ // Initialize the queue.
+ missingshqueue = new queue(sizeof(face));
+ // Initialize the working lists.
+ missingshlist = new list(sizeof(face), NULL);
+ boundedgelist = new list(sizeof(face), NULL);
+ crossedgelist = new list(sizeof(triface), NULL);
+ equatptlist = new list("point *");
+ crossshlist = new list(sizeof(face), NULL);
+ crosstetlist = new list(sizeof(triface), NULL);
+ belowfacelist = new list(sizeof(triface), NULL);
+ abovefacelist = new list(sizeof(triface), NULL);
+ horizptlist = new list("point *");
+ belowptlist = new list("point *");
+ aboveptlist = new list("point *");
+ newtetlist = new list(sizeof(triface), NULL);
+ missceillist = new list(sizeof(triface), NULL);
+ // Initialize the array for marking vertices.
+ worklist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) worklist[i] = 0;
+
+ // Compute a mapping from points to tetrahedra for fast searching.
+ makepoint2tetmap();
+
+ // Match subfaces in D, queue all missing subfaces.
+ insertallsubfaces(missingshqueue);
+
+ // Recover all missing subfaces.
+ while (!missingshqueue->empty()) {
+ // Get a queued face s.
+ subloop = * (face *) missingshqueue->pop();
+ // s may have been deleted in a face rearrangment operation.
+ if (isdead(&subloop)) continue;
+ // s may have been recovered in a previous missing region.
+ if (!sinfected(subloop)) continue;
+ // s may match a face in D now due to previous transformations.
+ if (insertsubface(&subloop, &searchtet)) {
+ suninfect(subloop);
+ continue;
+ }
+ if (b->verbose > 1) {
+ printf(" Recover subface (%d, %d, %d).\n", pointmark(sorg(subloop)),
+ pointmark(sdest(subloop)), pointmark(sapex(subloop)));
+ }
+ // Form the missing region R containing s.
+ formmissingregion(&subloop, missingshlist, equatptlist, worklist);
+ // Is R crossing by any tetrahedron?
+ if (scoutcrossingedge(missingshlist, boundedgelist, crossedgelist,
+ worklist)) {
+ // Form the cavity C containing R.
+ formcavity(missingshlist, crossedgelist, equatptlist, crossshlist,
+ crosstetlist, belowfacelist, abovefacelist, horizptlist,
+ belowptlist, aboveptlist, missingshqueue, worklist);
+ // Recover the above part of C.
+ do {
+ delaunizecavity(crossshlist, abovefacelist, horizptlist, aboveptlist,
+ newtetlist, missceillist, worklist);
+ if (missceillist->len() > 0) {
+ // There're unrecovered faces. Enlarge the above part of C.
+ enlargecavity(missceillist, abovefacelist, aboveptlist, horizptlist,
+ crosstetlist, missingshqueue, worklist);
+ missceillist->clear();
+ continue;
+ }
+ break;
+ } while (true);
+ // Inverse the direction of subfaces in R.
+ for (i = 0; i < crossshlist->len(); i++) {
+ worksh = * (face *)(* crossshlist)[i];
+ sesymself(worksh);
+ * (face *)(* crossshlist)[i] = worksh;
+ }
+ // Recover the below part of C.
+ do {
+ delaunizecavity(crossshlist, belowfacelist, horizptlist, belowptlist,
+ newtetlist, missceillist, worklist);
+ if (missceillist->len() > 0) {
+ // There're unrecovered faces. Enlarge the lower part of C.
+ enlargecavity(missceillist, belowfacelist, belowptlist, horizptlist,
+ crosstetlist, missingshqueue, worklist);
+ missceillist->clear();
+ continue;
+ }
+ break;
+ } while (true);
+ // Delete tetrahedra in C.
+ for (i = 0; i < crosstetlist->len(); i++) {
+ worktet = * (triface *)(* crosstetlist)[i];
+ tetrahedrondealloc(worktet.tet);
+ }
+ // There may have some un-recovered subfaces of R. Put them back into
+ // queue. Otherwise, they will be missing on the boundary.
+ for (i = 0; i < missingshlist->len(); i++) {
+ worksh = * (face *)(* missingshlist)[i];
+ if (sinfected(worksh)) {
+ // An unrecovered subface, put it back into queue.
+ missingshqueue->push(&worksh);
+ }
+ }
+ crossshlist->clear();
+ crosstetlist->clear();
+ belowfacelist->clear();
+ abovefacelist->clear();
+ horizptlist->clear();
+ belowptlist->clear();
+ aboveptlist->clear();
+ newtetlist->clear();
+ } else {
+ // No. Rearrange subfaces of F conforming to that of D in R.
+ rearrangesubfaces(missingshlist, boundedgelist, equatptlist, worklist);
+ }
+ // Clear all working lists.
+ missingshlist->clear();
+ boundedgelist->clear();
+ crossedgelist->clear();
+ equatptlist->clear();
+ }
+
+ // Subfaces have been merged into D.
+ checksubfaces = 1;
+
+ if (b->verbose) {
+ printf(" The biggest cavity: %d faces, %d vertices\n", maxcavfaces,
+ maxcavverts);
+ printf(" Enlarged %d times\n", enlcavtimes);
+ }
+
+ delete missingshqueue;
+ delete missingshlist;
+ delete boundedgelist;
+ delete crossedgelist;
+ delete equatptlist;
+ delete crossshlist;
+ delete crosstetlist;
+ delete belowfacelist;
+ delete abovefacelist;
+ delete horizptlist;
+ delete belowptlist;
+ delete aboveptlist;
+ delete newtetlist;
+ delete missceillist;
+ delete [] worklist;
+}
+
+//
+// End of facet recovery routines
+//
+
+//
+// Begin of carving out holes and concavities routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// infecthull() Virally infect all of the tetrahedra of the convex hull //
+// that are not protected by subfaces. Where there are //
+// subfaces, set boundary markers as appropriate. //
+// //
+// Memorypool 'viri' is used to return all the infected tetrahedra. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::infecthull(memorypool *viri)
+{
+ triface tetloop, tsymtet;
+ tetrahedron **deadtet;
+ face hullface;
+ // point horg, hdest, hapex;
+
+ if (b->verbose) {
+ printf(" Marking concavities for elimination.\n");
+ }
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ // Is this tetrahedron on the hull?
+ for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
+ sym(tetloop, tsymtet);
+ if (tsymtet.tet == dummytet) {
+ // Is the tetrahedron protected by a subface?
+ tspivot(tetloop, hullface);
+ if (hullface.sh == dummysh) {
+ // The tetrahedron is not protected; infect it.
+ if (!infected(tetloop)) {
+ infect(tetloop);
+ deadtet = (tetrahedron **) viri->alloc();
+ *deadtet = tetloop.tet;
+ break; // Go and get next tet.
+ }
+ } else {
+ // The tetrahedron is protected; set boundary markers if appropriate.
+ if (shellmark(hullface) == 0) {
+ setshellmark(hullface, 1);
+ /*
+ horg = sorg(hullface);
+ hdest = sdest(hullface);
+ hapex = sapex(hullface);
+ if (pointmark(horg) == 0) {
+ setpointmark(horg, 1);
+ }
+ if (pointmark(hdest) == 0) {
+ setpointmark(hdest, 1);
+ }
+ if (pointmark(hapex) == 0) {
+ setpointmark(hapex, 1);
+ }
+ */
+ }
+ }
+ }
+ }
+ tetloop.tet = tetrahedrontraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// plague() Spread the virus from all infected tets to any neighbors not //
+// protected by subfaces. //
+// //
+// This routine identifies all the tetrahedra that will die, and marks them //
+// as infected. They are marked to ensure that each tetrahedron is added to //
+// the virus pool only once, so the procedure will terminate. 'viri' returns //
+// all infected tetrahedra which are outside the domian. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::plague(memorypool *viri)
+{
+ tetrahedron **virusloop;
+ tetrahedron **deadtet;
+ triface testtet, neighbor;
+ face neighsh, testseg;
+ face spinsh, casingin, casingout;
+ int i;
+
+ if (b->verbose) {
+ printf(" Marking neighbors of marked tetrahedra.\n");
+ }
+ // Loop through all the infected tetrahedra, spreading the virus to
+ // their neighbors, then to their neighbors' neighbors.
+ viri->traversalinit();
+ virusloop = (tetrahedron **) viri->traverse();
+ while (virusloop != (tetrahedron **) NULL) {
+ testtet.tet = *virusloop;
+ // Temporarily uninfect this tetrahedron, not necessary.
+ uninfect(testtet);
+ // Check each of the tetrahedron's four neighbors.
+ for (testtet.loc = 0; testtet.loc < 4; testtet.loc++) {
+ // Find the neighbor.
+ sym(testtet, neighbor);
+ // Check for a shell between the tetrahedron and its neighbor.
+ tspivot(testtet, neighsh);
+ // Check if the neighbor is nonexistent or already infected.
+ if ((neighbor.tet == dummytet) || infected(neighbor)) {
+ if (neighsh.sh != dummysh) {
+ // There is a subface separating the tetrahedron from its neighbor,
+ // but both tetrahedra are dying, so the subface dies too.
+ // Before deallocte this subface, dissolve the connections between
+ // other subfaces, subsegments and tetrahedra.
+ neighsh.shver = 0;
+ // For keep the same enext() direction.
+ findedge(&testtet, sorg(neighsh), sdest(neighsh));
+ for (i = 0; i < 3; i++) {
+ sspivot(neighsh, testseg);
+ if (testseg.sh != dummysh) {
+ // A subsegment is found at this side, dissolve this subface
+ // from the face link of this subsegment.
+ testseg.shver = 0;
+ spinsh = neighsh;
+ if (sorg(spinsh) != sorg(testseg)) {
+ sesymself(spinsh);
+ }
+ spivot(spinsh, casingout);
+ if (casingout.sh == spinsh.sh) {
+ // This is a trivial face link, only 'neighsh' itself,
+ // the subsegment at this side is also died.
+ shellfacedealloc(subsegs, testseg.sh);
+ } else {
+ spinsh = casingout;
+ do {
+ casingin = spinsh;
+ spivotself(spinsh);
+ } while (spinsh.sh != neighsh.sh);
+ // Set the link casingin->casingout.
+ sbond1(casingin, casingout);
+ // Bond the subsegment anyway.
+ ssbond(casingin, testseg);
+ }
+ }
+ senextself(neighsh);
+ enextself(testtet);
+ }
+ shellfacedealloc(subfaces, neighsh.sh);
+ if (neighbor.tet != dummytet) {
+ // Make sure the subface doesn't get deallocated again later
+ // when the infected neighbor is visited.
+ tsdissolve(neighbor);
+ }
+ }
+ } else { // The neighbor exists and is not infected.
+ if (neighsh.sh == dummysh) {
+ // There is no subface protecting the neighbor, infect it.
+ infect(neighbor);
+ // Ensure that the neighbor's neighbors will be infected.
+ deadtet = (tetrahedron **) viri->alloc();
+ *deadtet = neighbor.tet;
+ } else { // The neighbor is protected by a subface.
+ // Remove this tetrahedron from the subface.
+ stdissolve(neighsh);
+ // The subface becomes a boundary. Set markers accordingly.
+ if (shellmark(neighsh) == 0) {
+ setshellmark(neighsh, 1);
+ }
+ }
+ }
+ }
+ // Remark the tetrahedron as infected, so it doesn't get added to the
+ // virus pool again.
+ infect(testtet);
+ virusloop = (tetrahedron **) viri->traverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// regionplague() Spread regional attributes and/or volume constraints //
+// (from a .poly file) throughout the mesh. //
+// //
+// This procedure operates in two phases. The first phase spreads an attri- //
+// bute and/or a volume constraint through a (facet-bounded) region. The //
+// second phase uninfects all infected tetrahedra, returning them to normal. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::
+regionplague(memorypool *regionviri, REAL attribute, REAL volume)
+{
+ tetrahedron **virusloop;
+ tetrahedron **regiontet;
+ triface testtet, neighbor;
+ face neighsh;
+
+ if (b->verbose > 1) {
+ printf(" Marking neighbors of marked tetrahedra.\n");
+ }
+ // Loop through all the infected tetrahedra, spreading the attribute
+ // and/or volume constraint to their neighbors, then to their neighbors'
+ // neighbors.
+ regionviri->traversalinit();
+ virusloop = (tetrahedron **) regionviri->traverse();
+ while (virusloop != (tetrahedron **) NULL) {
+ testtet.tet = *virusloop;
+ // Temporarily uninfect this tetrahedron, not necessary.
+ uninfect(testtet);
+ if (b->regionattrib) {
+ // Set an attribute.
+ setelemattribute(testtet.tet, in->numberoftetrahedronattributes,
+ attribute);
+ }
+ if (b->varvolume) {
+ // Set a volume constraint.
+ setvolumebound(testtet.tet, volume);
+ }
+ // Check each of the tetrahedron's four neighbors.
+ for (testtet.loc = 0; testtet.loc < 4; testtet.loc++) {
+ // Find the neighbor.
+ sym(testtet, neighbor);
+ // Check for a subface between the tetrahedron and its neighbor.
+ tspivot(testtet, neighsh);
+ // Make sure the neighbor exists, is not already infected, and
+ // isn't protected by a subface, or is protected by a nonsolid
+ // subface.
+ if ((neighbor.tet != dummytet) && !infected(neighbor)
+ && (neighsh.sh == dummysh)) {
+ // Infect the neighbor.
+ infect(neighbor);
+ // Ensure that the neighbor's neighbors will be infected.
+ regiontet = (tetrahedron **) regionviri->alloc();
+ *regiontet = neighbor.tet;
+ }
+ }
+ // Remark the tetrahedron as infected, so it doesn't get added to the
+ // virus pool again.
+ infect(testtet);
+ virusloop = (tetrahedron **) regionviri->traverse();
+ }
+
+ // Uninfect all tetrahedra.
+ if (b->verbose > 1) {
+ printf(" Unmarking marked tetrahedra.\n");
+ }
+ regionviri->traversalinit();
+ virusloop = (tetrahedron **) regionviri->traverse();
+ while (virusloop != (tetrahedron **) NULL) {
+ testtet.tet = *virusloop;
+ uninfect(testtet);
+ virusloop = (tetrahedron **) regionviri->traverse();
+ }
+ // Empty the virus pool.
+ regionviri->restart();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// removeholetets() Remove tetrahedra which are outside the domain. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::removeholetets(memorypool* viri)
+{
+ tetrahedron **virusloop;
+ triface testtet, neighbor;
+ point checkpt;
+ int *tetspernodelist;
+ int i, j;
+
+ if (b->verbose) {
+ printf(" Deleting marked tetrahedra.\n");
+ }
+
+ // Create and initialize 'tetspernodelist'.
+ tetspernodelist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) tetspernodelist[i] = 0;
+
+ // Loop the tetrahedra list, counter the number of tets sharing each node.
+ tetrahedrons->traversalinit();
+ testtet.tet = tetrahedrontraverse();
+ while (testtet.tet != (tetrahedron *) NULL) {
+ // Increment the number of sharing tets for each endpoint.
+ for (i = 0; i < 4; i++) {
+ j = pointmark((point) testtet.tet[4 + i]);
+ tetspernodelist[j]++;
+ }
+ testtet.tet = tetrahedrontraverse();
+ }
+
+ viri->traversalinit();
+ virusloop = (tetrahedron **) viri->traverse();
+ while (virusloop != (tetrahedron **) NULL) {
+ testtet.tet = *virusloop;
+ // Record changes in the number of boundary faces, and disconnect
+ // dead tetrahedra from their neighbors.
+ for (testtet.loc = 0; testtet.loc < 4; testtet.loc++) {
+ sym(testtet, neighbor);
+ if (neighbor.tet == dummytet) {
+ // There is no neighboring tetrahedron on this face, so this face
+ // is a boundary face. This tetrahedron is being deleted, so this
+ // boundary face is deleted.
+ hullsize--;
+ } else {
+ // Disconnect the tetrahedron from its neighbor.
+ dissolve(neighbor);
+ // There is a neighboring tetrahedron on this face, so this face
+ // becomes a boundary face when this tetrahedron is deleted.
+ hullsize++;
+ }
+ }
+ // Check the four corners of this tet if they're isolated.
+ for (i = 0; i < 4; i++) {
+ checkpt = (point) testtet.tet[4 + i];
+ j = pointmark(checkpt);
+ tetspernodelist[j]--;
+ if (tetspernodelist[j] == 0) {
+ setpointtype(checkpt, UNUSEDVERTEX);
+ unuverts++;
+ }
+ }
+ // Return the dead tetrahedron to the pool of tetrahedra.
+ tetrahedrondealloc(testtet.tet);
+ virusloop = (tetrahedron **) viri->traverse();
+ }
+
+ delete [] tetspernodelist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// carveholes() Find the holes and infect them. Find the volume //
+// constraints and infect them. Infect the convex hull. //
+// Spread the infection and kill tetrahedra. Spread the //
+// volume constraints. //
+// //
+// This routine mainly calls other routines to carry out all these functions.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::carveholes()
+{
+ memorypool *holeviri, *regionviri;
+ tetrahedron *tptr, **holetet, **regiontet;
+ triface searchtet, *holetets, *regiontets;
+ enum locateresult intersect;
+ int i;
+
+ if (!b->quiet) {
+ printf("Removing unwanted tetrahedra.\n");
+ if (b->verbose && (in->numberofholes > 0)) {
+ printf(" Marking holes for elimination.\n");
+ }
+ }
+
+ // Initialize a pool of viri to be used for holes, concavities.
+ holeviri = new memorypool(sizeof(tetrahedron *), 1024, POINTER, 0);
+ // Mark as infected any unprotected tetrahedra on the boundary.
+ infecthull(holeviri);
+
+ if (in->numberofholes > 0) {
+ // Allocate storage for the tetrahedra in which hole points fall.
+ holetets = (triface *) new triface[in->numberofholes];
+ // Infect each tetrahedron in which a hole lies.
+ for (i = 0; i < 3 * in->numberofholes; i += 3) {
+ // Ignore holes that aren't within the bounds of the mesh.
+ if ((in->holelist[i] >= xmin) && (in->holelist[i] <= xmax)
+ && (in->holelist[i + 1] >= ymin)
+ && (in->holelist[i + 1] <= ymax)
+ && (in->holelist[i + 2] >= zmin)
+ && (in->holelist[i + 2] <= zmax)) {
+ searchtet.tet = dummytet;
+ // Find a tetrahedron that contains the hole.
+ intersect = locate(&in->holelist[i], &searchtet);
+ if ((intersect != OUTSIDE) && (!infected(searchtet))) {
+ // Record the tetrahedron for processing carve hole.
+ holetets[i / 3] = searchtet;
+ }
+ }
+ }
+ // Infect the hole tetrahedron. This is done by marking the tet as
+ // infected and including the tetrahedron in the virus pool.
+ for (i = 0; i < in->numberofholes; i++) {
+ infect(holetets[i]);
+ holetet = (tetrahedron **) holeviri->alloc();
+ *holetet = holetets[i].tet;
+ }
+ // Free up memory.
+ delete [] holetets;
+ }
+
+ // Mark as infected all tets of the holes and concavities.
+ plague(holeviri);
+ // The virus pool contains all outside tets now.
+
+ if (in->numberofregions > 0) {
+ if (!b->quiet) {
+ if (b->regionattrib) {
+ if (b->varvolume) {
+ printf("Spreading regional attributes and volume constraints.\n");
+ } else {
+ printf("Spreading regional attributes.\n");
+ }
+ } else {
+ printf("Spreading regional volume constraints.\n");
+ }
+ }
+ // Allocate storage for the tetrahedra in which region points fall.
+ regiontets = (triface *) new triface[in->numberofregions];
+ // Find the starting tetrahedron for each region.
+ for (i = 0; i < in->numberofregions; i++) {
+ regiontets[i].tet = dummytet;
+ // Ignore region points that aren't within the bounds of the mesh.
+ if ((in->regionlist[5 * i] >= xmin)
+ && (in->regionlist[5 * i] <= xmax)
+ && (in->regionlist[5 * i + 1] >= ymin)
+ && (in->regionlist[5 * i + 1] <= ymax)
+ && (in->regionlist[5 * i + 2] >= zmin)
+ && (in->regionlist[5 * i + 2] <= zmax)) {
+ searchtet.tet = dummytet;
+ // Find a tetrahedron that contains the region point.
+ intersect = locate(&in->regionlist[5 * i], &searchtet);
+ if ((intersect != OUTSIDE) && (!infected(searchtet))) {
+ // Record the tetrahedron for processing after the
+ // holes have been carved.
+ regiontets[i] = searchtet;
+ }
+ }
+ }
+ if (b->regionattrib && !b->refine) {
+ // Assign every tetrahedron a regional attribute of zero.
+ tetrahedrons->traversalinit();
+ tptr = tetrahedrontraverse();
+ while (tptr != (tetrahedron *) NULL) {
+ setelemattribute(tptr, in->numberoftetrahedronattributes, 0.0);
+ tptr = tetrahedrontraverse();
+ }
+ }
+ // Initialize a pool to be used for regional attrs, and/or regional
+ // volume constraints.
+ regionviri = new memorypool(sizeof(tetrahedron *), 1024, POINTER, 0);
+ // Find and set all regions.
+ for (i = 0; i < in->numberofregions; i++) {
+ if (regiontets[i].tet != dummytet) {
+ // Make sure the tetrahedron under consideration still exists.
+ // It may have been eaten by the virus.
+ if (!isdead(&(regiontets[i]))) {
+ // Put one tetrahedron in the virus pool.
+ infect(regiontets[i]);
+ regiontet = (tetrahedron **) regionviri->alloc();
+ *regiontet = regiontets[i].tet;
+ // Apply one region's attribute and/or volume constraint.
+ regionplague(regionviri, in->regionlist[5 * i + 3],
+ in->regionlist[5 * i + 4]);
+ // The virus pool should be empty now.
+ }
+ }
+ }
+ if (b->regionattrib && !b->refine) {
+ // Note the fact that each tetrahedron has an additional attribute.
+ in->numberoftetrahedronattributes++;
+ }
+ // Free up memory.
+ delete [] regiontets;
+ delete regionviri;
+ }
+
+ // Now acutually remove the outside and hole tets.
+ removeholetets(holeviri);
+ // The mesh is nonconvex now.
+ nonconvex = 1;
+
+ // Free up memory.
+ delete holeviri;
+}
+
+//
+// End of carving out holes and concavities routines
+//
+
+//
+// Begin of mesh reconstruction routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// reconstructmesh() Reconstruct a tetrahedral mesh from a list of //
+// tetrahedra and possibly a list of boundary faces. //
+// //
+// The list of tetrahedra is stored in 'in->tetrahedronlist', the list of //
+// boundary faces is stored in 'in->trifacelist'. The tetrahedral mesh is //
+// reconstructed in memorypool 'tetrahedrons', its boundary faces (subfaces) //
+// are reconstructed in 'subfaces', its boundary edges (subsegments) are //
+// reconstructed in 'subsegs'. If the -a switch is used, this procedure will //
+// also read a list of REALs from 'in->tetrahedronvolumelist' and set a //
+// maximum volume constraint on each tetrahedron. //
+// //
+// If the user has provided the boundary faces in 'in->trifacelist', they //
+// will be inserted the mesh. Otherwise subfaces will be identified from the //
+// mesh. All hull faces (including faces of the internal holes) will be //
+// recognized as subfaces, internal faces between two tetrahedra which have //
+// different attributes will also be recognized as subfaces. //
+// //
+// Subsegments will be identified after subfaces are reconstructed. Edges at //
+// the intersections of non-coplanar subfaces are recognized as subsegments. //
+// Edges between two coplanar subfaces with different boundary markers are //
+// also recognized as subsegments. //
+// //
+// The facet index of each subface will be set automatically after we have //
+// recovered subfaces and subsegments. That is, the set of subfaces, which //
+// are coplanar and have the same boundary marker will be recognized as a //
+// facet and has a unique index, stored as the facet marker in each subface //
+// of the set, the real boundary marker of each subface will be found in //
+// 'in->facetmarkerlist' by the index. Facet index will be used in Delaunay //
+// refinement for detecting two incident facets. //
+// //
+// Points which are not corners of tetrahedra will be inserted into the mesh.//
+// Return the number of faces on the hull after the reconstruction. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+long tetgenmesh::reconstructmesh()
+{
+ tetrahedron **tetsperverlist;
+ shellface **facesperverlist;
+ triface tetloop, neightet, neineightet, spintet;
+ face subloop, neighsh, neineighsh, subseg;
+ face sface1, sface2;
+ point *idx2verlist;
+ point torg, tdest, tapex, toppo;
+ point norg, ndest, napex;
+ list *neighshlist, *markerlist;
+ REAL sign, attrib, volume;
+ REAL da1, da2;
+ bool bondflag, insertsegflag;
+ int *idx2tetlist;
+ int *idx2facelist;
+ int *worklist;
+ int facetidx, marker;
+ int iorg, idest, iapex, ioppo;
+ int inorg, indest, inapex;
+ int index, i, j;
+
+ if (!b->quiet) {
+ printf("Reconstructing mesh.\n");
+ }
+
+ // Create a map from index to points.
+ makeindex2pointmap(idx2verlist);
+
+ // Create the tetrahedra.
+ for (i = 0; i < in->numberoftetrahedra; i++) {
+ // Create a new tetrahedron and set its four corners, make sure that
+ // four corners form a positive orientation.
+ maketetrahedron(&tetloop);
+ index = i * in->numberofcorners;
+ // Although there may be 10 nodes, we only read the first 4.
+ iorg = in->tetrahedronlist[index] - in->firstnumber;
+ idest = in->tetrahedronlist[index + 1] - in->firstnumber;
+ iapex = in->tetrahedronlist[index + 2] - in->firstnumber;
+ ioppo = in->tetrahedronlist[index + 3] - in->firstnumber;
+ torg = idx2verlist[iorg];
+ tdest = idx2verlist[idest];
+ tapex = idx2verlist[iapex];
+ toppo = idx2verlist[ioppo];
+ sign = orient3d(torg, tdest, tapex, toppo);
+ if (sign > 0.0) {
+ norg = torg; torg = tdest; tdest = norg;
+ } else if (sign == 0.0) {
+ printf("Warning: Tetrahedron %d is degenerate.\n", i + in->firstnumber);
+ }
+ setorg(tetloop, torg);
+ setdest(tetloop, tdest);
+ setapex(tetloop, tapex);
+ setoppo(tetloop, toppo);
+ // Temporarily set the vertices be type FREEVOLVERTEX, to indicate that
+ // they belong to the mesh. These types may be changed later.
+ setpointtype(torg, FREEVOLVERTEX);
+ setpointtype(tdest, FREEVOLVERTEX);
+ setpointtype(tapex, FREEVOLVERTEX);
+ setpointtype(toppo, FREEVOLVERTEX);
+ // Set element attributes if they exist.
+ for (j = 0; j < in->numberoftetrahedronattributes; j++) {
+ index = i * in->numberoftetrahedronattributes;
+ attrib = in->tetrahedronattributelist[index + j];
+ setelemattribute(tetloop.tet, j, attrib);
+ }
+ // If -a switch is used (with no number follows) Set a volume
+ // constraint if it exists.
+ if (b->varvolume) {
+ if (in->tetrahedronvolumelist != (REAL *) NULL) {
+ volume = in->tetrahedronvolumelist[i];
+ } else {
+ volume = -1.0;
+ }
+ setvolumebound(tetloop.tet, volume);
+ }
+ }
+
+ // Set the connection between tetrahedra.
+ hullsize = 0l;
+ // Create a map from nodes to tetrahedra.
+ maketetrahedronmap(idx2tetlist, tetsperverlist);
+ // Initialize the worklist.
+ worklist = new int[points->items];
+ for (i = 0; i < points->items; i++) worklist[i] = 0;
+
+ // Loop all tetrahedra, bond two tetrahedra if they share a common face.
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ // Loop the four sides of the tetrahedron.
+ for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
+ sym(tetloop, neightet);
+ if (neightet.tet != dummytet) continue; // This side has finished.
+ torg = org(tetloop);
+ tdest = dest(tetloop);
+ tapex = apex(tetloop);
+ iorg = pointmark(torg) - in->firstnumber;
+ idest = pointmark(tdest) - in->firstnumber;
+ iapex = pointmark(tapex) - in->firstnumber;
+ worklist[iorg] = 1;
+ worklist[idest] = 1;
+ worklist[iapex] = 1;
+ bondflag = false;
+ // Search its neighbor in the adjacent tets of torg.
+ for (j = idx2tetlist[iorg]; j < idx2tetlist[iorg + 1] && !bondflag;
+ j++) {
+ if (tetsperverlist[j] == tetloop.tet) continue; // Skip myself.
+ neightet.tet = tetsperverlist[j];
+ for (neightet.loc = 0; neightet.loc < 4; neightet.loc++) {
+ sym(neightet, neineightet);
+ if (neineightet.tet == dummytet) {
+ norg = org(neightet);
+ ndest = dest(neightet);
+ napex = apex(neightet);
+ inorg = pointmark(norg) - in->firstnumber;
+ indest = pointmark(ndest) - in->firstnumber;
+ inapex = pointmark(napex) - in->firstnumber;
+ if ((worklist[inorg] + worklist[indest] + worklist[inapex]) == 3) {
+ // Find! Bond them together and break the loop.
+ bond(tetloop, neightet);
+ bondflag = true;
+ break;
+ }
+ }
+ }
+ }
+ if (!bondflag) {
+ hullsize++; // It's a hull face.
+ // Bond this side to outer space.
+ dummytet[0] = encode(tetloop);
+ if (in->pointmarkerlist != (int *) NULL) {
+ // Set its three corners's markers be boundary (hull) vertices.
+ if (in->pointmarkerlist[iorg] == 0) {
+ in->pointmarkerlist[iorg] = 1;
+ }
+ if (in->pointmarkerlist[idest] == 0) {
+ in->pointmarkerlist[idest] = 1;
+ }
+ if (in->pointmarkerlist[iapex] == 0) {
+ in->pointmarkerlist[iapex] = 1;
+ }
+ }
+ }
+ worklist[iorg] = 0;
+ worklist[idest] = 0;
+ worklist[iapex] = 0;
+ }
+ tetloop.tet = tetrahedrontraverse();
+ }
+
+ // Subfaces will be inserted into the mesh.
+ if (in->trifacelist != (int *) NULL) {
+ // Recover subfaces from 'in->trifacelist'.
+ for (i = 0; i < in->numberoftrifaces; i++) {
+ index = i * 3;
+ iorg = in->trifacelist[index] - in->firstnumber;
+ idest = in->trifacelist[index + 1] - in->firstnumber;
+ iapex = in->trifacelist[index + 2] - in->firstnumber;
+ // Look for the location of this subface.
+ worklist[iorg] = 1;
+ worklist[idest] = 1;
+ worklist[iapex] = 1;
+ bondflag = false;
+ // Search its neighbor in the adjacent tets of torg.
+ for (j = idx2tetlist[iorg]; j < idx2tetlist[iorg + 1] && !bondflag;
+ j++) {
+ neightet.tet = tetsperverlist[j];
+ for (neightet.loc = 0; neightet.loc < 4; neightet.loc++) {
+ norg = org(neightet);
+ ndest = dest(neightet);
+ napex = apex(neightet);
+ inorg = pointmark(norg) - in->firstnumber;
+ indest = pointmark(ndest) - in->firstnumber;
+ inapex = pointmark(napex) - in->firstnumber;
+ if ((worklist[inorg] + worklist[indest] + worklist[inapex]) == 3) {
+ bondflag = true; // Find!
+ break;
+ }
+ }
+ }
+ if (bondflag) {
+ // Create a new subface and insert it into the mesh.
+ makeshellface(subfaces, &subloop);
+ torg = idx2verlist[iorg];
+ tdest = idx2verlist[idest];
+ tapex = idx2verlist[iapex];
+ setsorg(subloop, torg);
+ setsdest(subloop, tdest);
+ setsapex(subloop, tapex);
+ // Set the vertices be FREESUBVERTEX to indicate they belong to a
+ // facet of the domain. They may be changed later.
+ setpointtype(torg, FREESUBVERTEX);
+ setpointtype(tdest, FREESUBVERTEX);
+ setpointtype(tapex, FREESUBVERTEX);
+ if (in->trifacemarkerlist != (int *) NULL) {
+ setshellmark(subloop, in->trifacemarkerlist[i]);
+ }
+ adjustedgering(neightet, CCW);
+ findedge(&subloop, org(neightet), dest(neightet));
+ tsbond(neightet, subloop);
+ sym(neightet, neineightet);
+ if (neineightet.tet != dummytet) {
+ sesymself(subloop);
+ tsbond(neineightet, subloop);
+ }
+ } else {
+ printf("Warning: Subface %d is discarded.\n", i + in->firstnumber);
+ }
+ worklist[iorg] = 0;
+ worklist[idest] = 0;
+ worklist[iapex] = 0;
+ }
+ } else {
+ // Indentify subfaces from the mesh.
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ // Loop the four sides of the tetrahedron.
+ for (tetloop.loc = 0; tetloop.loc < 4; tetloop.loc++) {
+ tspivot(tetloop, subloop);
+ if (subloop.sh != dummysh) continue;
+ bondflag = false;
+ sym(tetloop, neightet);
+ if (neightet.tet == dummytet) {
+ // It's a hull face. Insert a subface at here.
+ bondflag = true;
+ } else {
+ // It's an interior face. Insert a subface if two tetrahedra have
+ // different attributes (i.e., they belong to two regions).
+ if (in->numberoftetrahedronattributes > 0) {
+ if (elemattribute(neightet.tet,
+ in->numberoftetrahedronattributes - 1) !=
+ elemattribute(tetloop.tet,
+ in->numberoftetrahedronattributes - 1)) {
+ bondflag = true;
+ }
+ }
+ }
+ if (bondflag) {
+ adjustedgering(tetloop, CCW);
+ makeshellface(subfaces, &subloop);
+ torg = org(tetloop);
+ tdest = dest(tetloop);
+ tapex = apex(tetloop);
+ setsorg(subloop, torg);
+ setsdest(subloop, tdest);
+ setsapex(subloop, tapex);
+ // Set the vertices be FACETVERTEX to indicate they belong to a
+ // facet of the domain. They may be changed later.
+ setpointtype(torg, FACETVERTEX);
+ setpointtype(tdest, FACETVERTEX);
+ setpointtype(tapex, FACETVERTEX);
+ tsbond(tetloop, subloop);
+ if (neightet.tet != dummytet) {
+ sesymself(subloop);
+ tsbond(neightet, subloop);
+ }
+ }
+ }
+ tetloop.tet = tetrahedrontraverse();
+ }
+ }
+
+ // Set the connection between subfaces. A subsegment may have more than
+ // two subfaces sharing it, 'neighshlist' stores all subfaces sharing
+ // one edge.
+ neighshlist = new list(sizeof(face), NULL);
+ // Create a map from nodes to subfaces.
+ makesubfacemap(idx2facelist, facesperverlist);
+
+ // Loop over the set of subfaces, setup the connection between subfaces.
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ for (i = 0; i < 3; i++) {
+ spivot(subloop, neighsh);
+ if (neighsh.sh == dummysh) {
+ // This side is 'empty', operate on it.
+ torg = sorg(subloop);
+ tdest = sdest(subloop);
+ tapex = sapex(subloop);
+ neighshlist->append(&subloop);
+ iorg = pointmark(torg) - in->firstnumber;
+ // Search its neighbor in the adjacent list of torg.
+ for (j = idx2facelist[iorg]; j < idx2facelist[iorg + 1]; j++) {
+ neighsh.sh = facesperverlist[j];
+ if (neighsh.sh == subloop.sh) continue;
+ neighsh.shver = 0;
+ if (isfacehasedge(&neighsh, torg, tdest)) {
+ findedge(&neighsh, torg, tdest);
+ // Insert 'neighsh' into 'neighshlist'.
+ if (neighshlist->len() < 2) {
+ neighshlist->append(&neighsh);
+ } else {
+ for (index = 0; index < neighshlist->len() - 1; index++) {
+ sface1 = * (face *)(* neighshlist)[index];
+ sface2 = * (face *)(* neighshlist)[index + 1];
+ da1 = facedihedral(torg, tdest, sapex(sface1), sapex(neighsh));
+ da2 = facedihedral(torg, tdest, sapex(sface1), sapex(sface2));
+ if (da1 < da2) {
+ break; // Insert it after index.
+ }
+ }
+ neighshlist->insert(index + 1, &neighsh);
+ }
+ }
+ }
+ // Bond the subfaces in 'neighshlist'.
+ if (neighshlist->len() > 1) {
+ neighsh = * (face *)(* neighshlist)[0];
+ for (j = 1; j <= neighshlist->len(); j++) {
+ if (j < neighshlist->len()) {
+ neineighsh = * (face *)(* neighshlist)[j];
+ } else {
+ neineighsh = * (face *)(* neighshlist)[0];
+ }
+ sbond1(neighsh, neineighsh);
+ neighsh = neineighsh;
+ }
+ } else {
+ // No neighbor subface be found, bond 'subloop' to itself.
+ sbond(subloop, subloop);
+ }
+ neighshlist->clear();
+ }
+ senextself(subloop);
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+
+ // Segments will be introudced. Each segment has a unique marker (1-based).
+ marker = 1;
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ for (i = 0; i < 3; i++) {
+ sspivot(subloop, subseg);
+ if (subseg.sh == dummysh) {
+ // This side has no subsegment bonded, check it.
+ torg = sorg(subloop);
+ tdest = sdest(subloop);
+ tapex = sapex(subloop);
+ spivot(subloop, neighsh);
+ spivot(neighsh, neineighsh);
+ insertsegflag = false;
+ if (subloop.sh == neighsh.sh || subloop.sh != neineighsh.sh) {
+ // This side is either self-bonded or more than two subfaces,
+ // insert a subsegment at this side.
+ insertsegflag = true;
+ } else {
+ // Only two subfaces case.
+ assert(subloop.sh != neighsh.sh);
+ napex = sapex(neighsh);
+ sign = orient3d(torg, tdest, tapex, napex);
+ if (iscoplanar(torg, tdest, tapex, napex, sign, b->epsilon)) {
+ // Although they are coplanar, we still need to check if they
+ // have the same boundary marker.
+ insertsegflag = (shellmark(subloop) != shellmark(neighsh));
+ } else {
+ // Non-coplanar.
+ insertsegflag = true;
+ }
+ }
+ if (insertsegflag) {
+ // Create a subsegment at this side.
+ makeshellface(subsegs, &subseg);
+ setsorg(subseg, torg);
+ setsdest(subseg, tdest);
+ // At the moment, all segment vertices have type FACETVERTEX.
+ // They will be set to type ACUTEVERTEX or NACUTEVERTEX by
+ // routine markacutevertices() later.
+ // setpointtype(torg, SEGMENTVERTEX);
+ // setpointtype(tdest, SEGMENTVERTEX);
+ setshellmark(subseg, marker);
+ marker++;
+ // Bond all subfaces to this subsegment.
+ neighsh = subloop;
+ do {
+ ssbond(neighsh, subseg);
+ spivotself(neighsh);
+ } while (neighsh.sh != subloop.sh);
+ }
+ }
+ senextself(subloop);
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+ // Remember the number of input segments.
+ insegment = subsegs->items;
+ // Find the acute vertices and set them be type ACUTEVERTEX.
+
+ // Indentify facets and set the facet marker (1-based) for subfaces.
+ markerlist = new list("int");
+
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ // Only operate on uninfected subface, after operating, infect it.
+ if (!sinfected(subloop)) {
+ // A new facet is found.
+ marker = shellmark(subloop);
+ markerlist->append(&marker);
+ facetidx = markerlist->len(); // 'facetidx' starts from 1.
+ setshellmark(subloop, facetidx);
+ sinfect(subloop);
+ neighshlist->append(&subloop);
+ // Find out all subfaces of this facet (bounded by subsegments).
+ for (i = 0; i < neighshlist->len(); i++) {
+ neighsh = * (face *) (* neighshlist)[i];
+ for (j = 0; j < 3; j++) {
+ sspivot(neighsh, subseg);
+ if (subseg.sh == dummysh) {
+ spivot(neighsh, neineighsh);
+ if (!sinfected(neineighsh)) {
+ // 'neineighsh' is in the same facet as 'subloop'.
+ assert(shellmark(neineighsh) == marker);
+ setshellmark(neineighsh, facetidx);
+ sinfect(neineighsh);
+ neighshlist->append(&neineighsh);
+ }
+ }
+ senextself(neighsh);
+ }
+ }
+ neighshlist->clear();
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+ // Save the facet markers in 'in->facetmarkerlist'.
+ in->numberoffacets = markerlist->len();
+ in->facetmarkerlist = new int[in->numberoffacets];
+ for (i = 0; i < in->numberoffacets; i++) {
+ marker = * (int *) (* markerlist)[i];
+ in->facetmarkerlist[i] = marker;
+ }
+ // Uninfect all subfaces.
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ assert(sinfected(subloop));
+ suninfect(subloop);
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+
+ // The mesh contains boundary now.
+ checksubfaces = 1;
+
+ // Is there periodic boundary confitions?
+ if (checkpbcs) {
+ if (in->pbcgrouplist != (tetgenio::pbcgroup *) NULL) {
+ tetgenio::pbcgroup *pg;
+ pbcdata *pd;
+ // Create 'subpbcgrouptable'.
+ createsubpbcgrouptable();
+ // Loop for each pbcgroup i.
+ for (i = 0; i < in->numberofpbcgroups; i++) {
+ pg = &(in->pbcgrouplist[i]);
+ pd = &(subpbcgrouptable[i]);
+ // Find all subfaces of pd, set each subface's group id be i.
+ for (j = 0; j < 2; j++) {
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ facetidx = shellmark(subloop);
+ marker = in->facetmarkerlist[facetidx - 1];
+ if (marker == pd->fmark[j]) {
+ setshellpbcgroup(subloop, i);
+ pd->ss[j] = subloop;
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+ }
+ if (pg->pointpairlist != (int *) NULL) {
+ // Set the connections between pbc point pairs.
+ for (j = 0; j < pg->numberofpointpairs; j++) {
+ iorg = pg->pointpairlist[j * 2] - in->firstnumber;
+ idest = pg->pointpairlist[j * 2 + 1] - in->firstnumber;
+ torg = idx2verlist[iorg];
+ tdest = idx2verlist[idest];
+ setpoint2pbcpt(torg, tdest);
+ setpoint2pbcpt(tdest, torg);
+ }
+ }
+ }
+ // Create 'segpbcgrouptable'.
+ createsegpbcgrouptable();
+ }
+ }
+
+ if (b->quality && varconstraint) {
+ // Assign constraints on facets, segments, and nodes.
+ assignvarconstraints(idx2verlist);
+ }
+
+ if (b->quality) {
+ // Check and recover the Delaunay property.
+ queue* flipqueue = new queue(sizeof(badface));
+ checkdelaunay(0.0, flipqueue);
+ if (!flipqueue->empty()) {
+ // Call flip algorithm to recover Delaunayness.
+ flip(flipqueue, NULL, false, false, false);
+ }
+ delete flipqueue;
+ }
+
+ delete markerlist;
+ delete neighshlist;
+ delete [] worklist;
+ delete [] idx2tetlist;
+ delete [] tetsperverlist;
+ delete [] idx2facelist;
+ delete [] facesperverlist;
+ delete [] idx2verlist;
+
+ return hullsize;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// insertaddpoints() Insert additional points in 'in->addpointlist'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::insertaddpoints()
+{
+ queue *flipqueue;
+ triface searchtet;
+ face checksh, checkseg;
+ point newpoint;
+ point p1, p2, p3, p4;
+ enum locateresult loc;
+ REAL ori;
+ int index;
+ int i;
+
+ if (!b->quiet) {
+ printf("Insert additional points into mesh.\n");
+ }
+ // Initialize 'flipqueue'.
+ flipqueue = new queue(sizeof(badface));
+ recenttet.tet = dummytet;
+
+ index = 0;
+ for (i = 0; i < in->numberofaddpoints; i++) {
+ // Create a newpoint.
+ makepoint(&newpoint);
+ newpoint[0] = in->addpointlist[index++];
+ newpoint[1] = in->addpointlist[index++];
+ newpoint[2] = in->addpointlist[index++];
+ // Find the location of the inserted point.
+ searchtet = recenttet;
+ loc = locate(newpoint, &searchtet);
+ if (loc != OUTSIDE) {
+ if (loc != ONVERTEX) {
+ loc = adjustlocate(newpoint, &searchtet, loc, b->epsilon);
+ }
+ }
+ if (loc == OUTSIDE) {
+ // Perform a brute-force search.
+ tetrahedrons->traversalinit();
+ searchtet.tet = tetrahedrontraverse();
+ while (searchtet.tet != (tetrahedron *) NULL) {
+ p1 = (point) searchtet.tet[4];
+ p2 = (point) searchtet.tet[5];
+ p3 = (point) searchtet.tet[6];
+ p4 = (point) searchtet.tet[7];
+ ori = orient3d(p2, p1, p3, newpoint);
+ if (ori >= 0) {
+ ori = orient3d(p1, p2, p4, newpoint);
+ if (ori >= 0) {
+ ori = orient3d(p2, p3, p4, newpoint);
+ if (ori >= 0) {
+ ori = orient3d(p3, p1, p4, newpoint);
+ if (ori >= 0) {
+ // 'newpoint' lies inside, or on a face, or on an edge, or
+ // a vertex of 'searchtet'.
+ loc = adjustlocate(newpoint, &searchtet, OUTSIDE, b->epsilon);
+ if (loc != OUTSIDE) break;
+ }
+ }
+ }
+ }
+ searchtet.tet = tetrahedrontraverse();
+ }
+ }
+ // Insert the point if it not lies outside or on a vertex.
+ switch (loc) {
+ case INTETRAHEDRON:
+ setpointtype(newpoint, FREEVOLVERTEX);
+ splittetrahedron(newpoint, &searchtet, flipqueue);
+ break;
+ case ONFACE:
+ tspivot(searchtet, checksh);
+ if (checksh.sh != dummysh) {
+ setpointtype(newpoint, FREESUBVERTEX);
+ } else {
+ setpointtype(newpoint, FREEVOLVERTEX);
+ }
+ splittetface(newpoint, &searchtet, flipqueue);
+ break;
+ case ONEDGE:
+ tsspivot(&searchtet, &checkseg);
+ if (checkseg.sh != dummysh) {
+ setpointtype(newpoint, FREESEGVERTEX);
+ } else {
+ tspivot(searchtet, checksh);
+ if (checksh.sh != dummysh) {
+ setpointtype(newpoint, FREESUBVERTEX);
+ } else {
+ setpointtype(newpoint, FREEVOLVERTEX);
+ }
+ }
+ splittetedge(newpoint, &searchtet, flipqueue);
+ break;
+ case ONVERTEX:
+ if (b->verbose) {
+ printf("Warning: Point (%.17g, %.17g, %.17g) falls on a vertex.\n",
+ newpoint[0], newpoint[1], newpoint[2]);
+ }
+ break;
+ case OUTSIDE:
+ if (b->verbose) {
+ printf("Warning: Point (%.17g, %.17g, %.17g) lies outside the mesh.\n",
+ newpoint[0], newpoint[1], newpoint[2]);
+ }
+ break;
+ }
+ // Remember the tetrahedron for next point searching.
+ recenttet = searchtet;
+ if (loc == ONVERTEX || loc == OUTSIDE) {
+ pointdealloc(newpoint);
+ } else {
+ flip(flipqueue, NULL, false, false, false);
+ }
+ }
+
+ delete flipqueue;
+}
+
+//
+// End of mesh reconstruction routines
+//
+
+//
+// Begin of mesh repair routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checktet4dege() Check a tetrahedron to see if it is degenerate. //
+// //
+// A tetrahedron is degenerate if (1) it has a zero-volume; or (2) it has 2 //
+// faces on a facet. case (2) is caused by the vertices of a facet are not //
+// exactly coplanar. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checktet4dege(triface* testtet, list* degetetlist)
+{
+ badface *degetet;
+ face checksh1, checksh2;
+ face checkseg;
+ point pa, pb, pc, pd;
+ REAL volume;
+ int shmark1, shmark2;
+ int i, j, k, l;
+
+ pa = org(*testtet);
+ pb = dest(*testtet);
+ pc = apex(*testtet);
+ pd = oppo(*testtet);
+ volume = orient3d(pb, pa, pc, pd);
+ // 'volume' should be non negative.
+ assert(volume >= 0.0);
+
+ if (volume != 0.0) {
+ // Check if it spans on one facet. That is, to look if there're two
+ // subfaces of the tet which belong to the same facet.
+ for (i = 0; (i < 3) && (volume != 0); i++) {
+ sdecode((shellface) testtet->tet[8 + i], checksh1);
+ if (checksh1.sh != dummysh) {
+ shmark1 = shellmark(checksh1);
+ for (j = i + 1; (j < 4) && (volume != 0); j++) {
+ sdecode((shellface) testtet->tet[8 + j], checksh2);
+ if (checksh2.sh != dummysh) {
+ shmark2 = shellmark(checksh2);
+ if (shmark1 == shmark2) {
+ // The same marker - belong to the same facet.
+ volume = 0.0;
+ } else {
+ // Two different markers. Find the sharing edge.
+ for (k = 0; k < 3; k++) {
+ for (l = 0; l < 3; l++) {
+ if (sorg(checksh2) == sorg(checksh1)) {
+ if (sdest(checksh2) == sdest(checksh1)) break;
+ } else if (sdest(checksh2) == sorg(checksh1)) {
+ if (sorg(checksh2) == sdest(checksh1)) break;
+ }
+ senextself(checksh2);
+ }
+ if (l < 3) break;
+ senextself(checksh1);
+ }
+ assert(k < 3); // The edge must exist.
+ // Is there a segment?
+ sspivot(checksh2, checkseg);
+ if (checkseg.sh == dummysh) {
+ // No segment - two subfaces belong to a unified facet.
+ volume = 0.0;
+ }
+ }
+ }
+ }
+ }
+ }
+ }
+
+ if (volume == 0.0) {
+ if (degetetlist != (list *) NULL) {
+ degetet = (badface *) degetetlist->append(NULL);
+ degetet->tt = *testtet;
+ degetet->forg = pa;
+ degetet->fdest = pb;
+ degetet->fapex = pc;
+ degetet->foppo = pd;
+ }
+ if (b->verbose > 1) {
+ printf(" Find tet (%d, %d, %d, %d).\n", pointmark(pa), pointmark(pb),
+ pointmark(pc), pointmark(pd));
+ }
+ }
+
+ return volume == 0.0;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// finddiagonal() Find one of the diagonal edges in a kite. //
+// //
+// 'akite' (abcd) is degenerate. This routine sets ab be the diagonal edge. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::finddiagonal(triface* akite)
+{
+ point pa, pb, pc, pd;
+ REAL v1[3], v2[3], v3[3];
+ REAL L12, L22, L32;
+ REAL pref[3], n[3], nlen;
+ REAL sign1, sign2, sign3;
+ int i;
+
+ pa = org(*akite);
+ pb = dest(*akite);
+ pc = apex(*akite);
+ pd = oppo(*akite);
+
+ // Calculate a point which is exactly above the plane having abcd.
+ L12 = L22 = L32 = 0.0;
+ for (i = 0; i < 3; i++) {v1[i] = pb[i] - pa[i]; L12 += (v1[i] * v1[i]);}
+ for (i = 0; i < 3; i++) {v2[i] = pc[i] - pa[i]; L22 += (v2[i] * v2[i]);}
+ for (i = 0; i < 3; i++) {v3[i] = pd[i] - pa[i]; L32 += (v3[i] * v3[i]);}
+ sign1 = v1[0] * v2[0] + v1[1] * v2[1] + v1[2] * v2[2];
+ sign2 = v1[0] * v3[0] + v1[1] * v3[1] + v1[2] * v3[2];
+ sign1 = (sign1 * sign1) / (L12 * L22);
+ sign2 = (sign2 * sign2) / (L12 * L32);
+ if (sign1 < sign2) {
+ // Angle cab is closer to 90 degree.
+ facenormal(pa, pb, pc, n, &nlen);
+ } else {
+ // Angle dab is closer to 90 degree.
+ facenormal(pa, pb, pd, n, &nlen);
+ }
+ assert(nlen > 0.0);
+ for (i = 0; i < 3; i++) n[i] /= nlen;
+ nlen = sqrt(L12);
+ for (i = 0; i < 3; i++) pref[i] = pa[i] + nlen * n[i];
+
+ for (i = 0; i < 3; i++) {
+ pa = org(*akite);
+ pb = dest(*akite);
+ pc = apex(*akite);
+ sign1 = orient3d(pa, pb, pref, pc);
+ sign2 = orient3d(pa, pb, pref, pd);
+ sign3 = sign1 * sign2;
+ assert(sign3 != 0.0);
+ if (sign3 < 0.0) break;
+ enextself(*akite);
+ }
+ if (i == 3) return false;
+ return true;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// removetetbypeeloff() Remove a boundary tetrahedron by peeling off. //
+// //
+// 'badtet' (abcd) is a boundary tetrahedron and going to be peeled off. abc //
+// and bad are the external boundary faces. //
+// //
+// To peel 'abcd' from the mesh is to detach its two interal faces (dca and //
+// cdb) from their adjoining tetrahedra together with a 2-to-2 flip to trans-//
+// form two subfaces (abc and bad) into another two (dca and cdb). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::removetetbypeeloff(triface *badtet, queue* flipqueue)
+{
+ triface abcd, badc;
+ triface dcacasing, cdbcasing;
+ face abc, bad;
+
+ if (b->verbose > 1) {
+ printf(" by peeling off it from boundary.\n");
+ }
+
+ abcd = *badtet;
+ adjustedgering(abcd, CCW);
+
+ // Get the external subfaces abc, bad.
+ fnext(abcd, badc);
+ esymself(badc);
+ tspivot(abcd, abc);
+ tspivot(badc, bad);
+ assert((abc.sh != dummysh) && (bad.sh != dummysh));
+ findedge(&abc, org(abcd), dest(abcd));
+ findedge(&bad, org(badc), dest(badc));
+
+ // Get the casing tets at the internal sides.
+ enextfnext(abcd, cdbcasing);
+ enext2fnext(abcd, dcacasing);
+ symself(cdbcasing);
+ symself(dcacasing);
+ assert(cdbcasing.tet != dummytet && dcacasing.tet != dummytet);
+
+ // Do a 2-to-2 flip on abc and bad, transform abc->dca, bad->cdb.
+ flip22sub(&abc, NULL);
+ // Detach abcd from the two internal faces.
+ dissolve(cdbcasing);
+ dissolve(dcacasing);
+ // The two internal faces become boundary faces.
+ tsbond(cdbcasing, bad);
+ tsbond(dcacasing, abc);
+ // Delete abcd.
+ tetrahedrondealloc(abcd.tet);
+
+ if (flipqueue != (queue *) NULL) {
+ // Edge cd may be non-Delaunay.
+ adjustedgering(cdbcasing, CCW);
+ fnextself(cdbcasing);
+ enqueueflipface(cdbcasing, flipqueue);
+ adjustedgering(dcacasing, CCW);
+ fnextself(dcacasing);
+ enqueueflipface(dcacasing, flipqueue);
+ // Do flipping if cd is non-Delaunay.
+ flip(flipqueue, NULL, false, false, false);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// removetetbyflip32() Remove a tetrahedron by a 3-to-2 flip. //
+// //
+// 'badtet' (abcd) is the bad tetrahedron which is going to be removed by a //
+// 3-to-2 flip. abc represents one of the internal faces, bad is another. //
+// If abc and bad are subfaces, a 2-to-2 flip is performed to transform abc, //
+// bad into dca, cdb, before the 3-to-2 flip is applying. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::removetetbyflip32(triface *badtet, queue* flipqueue)
+{
+ triface abcd, badc;
+ triface cdab, dcba;
+ triface baccasing, abdcasing;
+ triface dcacasing, cdbcasing;
+ face abc, bad;
+ REAL attrib, testattr;
+ int i;
+
+ if (b->verbose > 1) {
+ printf(" by doing a 3-to-2 flip.\n");
+ }
+
+ abcd = *badtet;
+ adjustedgering(abcd, CCW);
+ fnext(abcd, badc);
+ esymself(badc);
+ sym(abcd, baccasing);
+ sym(badc, abdcasing);
+ assert((baccasing.tet != dummytet) && (abdcasing.tet != dummytet));
+ assert(oppo(baccasing) == oppo(abdcasing));
+
+ // Get subfaces abc, bad.
+ tspivot(abcd, abc);
+ tspivot(badc, bad);
+ if (abc.sh != dummysh) {
+ // Because ab should not be a subsegment.
+ assert(bad.sh != dummysh);
+ // Find abc and bad are internal subfaces. Here baccasing and abdcasing
+ // must have the same attributes (such as the region attribute if the
+ // -A switch is in use). But abcd may not be at the same region. After
+ // flip32, if abcd is not deleted, it will have wrong attributes. Set
+ // abcd be the same region attributes as baccasing and abdcasing.
+ for (i = 0; i < in->numberoftetrahedronattributes; i++) {
+ attrib = elemattribute(baccasing.tet, i);
+ testattr = elemattribute(abdcasing.tet, i);
+ assert(attrib == testattr);
+ setelemattribute(abcd.tet, i, attrib);
+ }
+ findedge(&abc, org(abcd), dest(abcd));
+ findedge(&bad, org(badc), dest(badc));
+ // Detach abc, bad from the four tetrahedra at both sides.
+ stdissolve(abc);
+ stdissolve(bad);
+ sesymself(abc);
+ sesymself(bad);
+ stdissolve(abc);
+ stdissolve(bad);
+ sesymself(abc);
+ sesymself(bad);
+ // Detach the four tetrahedra which hold abc and bad.
+ tsdissolve(abcd);
+ tsdissolve(badc);
+ tsdissolve(baccasing);
+ tsdissolve(abdcasing);
+ // Perform a 2-to-2 flip on abc, bad, transform abc->dca, bad->cdb.
+ flip22sub(&abc, NULL);
+ // Insert the flipped subfaces abc and bad into tetrahedra.
+ enextfnext(abcd, dcba); // dcba = bcda
+ esymself(dcba); // dcba = cbda
+ enext2fnext(abcd, cdab); // cdab = cadb
+ esymself(cdab); // cdab = acdb
+ findedge(&abc, org(cdab), dest(cdab));
+ tsbond(cdab, abc);
+ findedge(&bad, org(dcba), dest(dcba));
+ tsbond(dcba, bad);
+ // Bond the other sides of cdab, dcba, they may outer space.
+ sym(cdab, dcacasing);
+ sym(dcba, cdbcasing);
+ sesymself(abc);
+ sesymself(bad);
+ tsbond(dcacasing, abc);
+ tsbond(cdbcasing, bad);
+ }
+ // Do a 3-to-2 flip on face abc to remove tetrahedron abcd.
+ flip32(&abcd, flipqueue);
+ // Do flipping if necessary.
+ if (flipqueue != (queue *) NULL) {
+ flip(flipqueue, NULL, false, false, false);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// removekite() Remove a degenerate kite from the mesh. //
+// //
+// 'akite' (abcd) is a degenerate kite (i.e., a, b, c, and d are coplanar), //
+// and ab is the diagonal edge. It is removable if (a) either the face pair //
+// abc and abd or dca and dcb are hull faces, hence it can be peeled off; or //
+// (b) it is an internal tet and either edge ab or cd can be flipped by a 3- //
+// to-2 flip. Remove the kite if it is in case (a) or (b) and return TRUE. //
+// Otherwise it is unremovable, do nothing and return FALSE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::removekite(triface* akite, queue* flipqueue)
+{
+ triface abcd, badc; // Tet configuration at edge ab.
+ triface baccasing, abdcasing;
+ triface cdab, dcba; // Tet configuration at edge cd.
+ triface bcdcasing, cadcasing;
+ face abseg, cdseg;
+
+ abcd = *akite;
+ adjustedgering(abcd, CCW);
+
+ if (b->verbose > 1) {
+ printf(" Removing kite (%d, %d, %d, %d).\n", pointmark(org(abcd)),
+ pointmark(dest(abcd)), pointmark(apex(abcd)), pointmark(oppo(abcd)));
+ }
+
+ // Get the tet configuration at edge ab.
+ fnext(abcd, badc);
+ esymself(badc);
+ sym(abcd, baccasing);
+ sym(badc, abdcasing);
+ tsspivot(&abcd, &abseg);
+ // Is edge ab a subsegment?
+ if (abseg.sh == dummysh) {
+ // Can 'abcd' be peeled off?
+ if ((baccasing.tet == dummytet) && (abdcasing.tet == dummytet)) {
+ removetetbypeeloff(&abcd, flipqueue);
+ return true;
+ }
+ // Can edge 'ab' be flipped away?
+ if (oppo(baccasing) == oppo(abdcasing)) {
+ removetetbyflip32(&abcd, flipqueue);
+ return true;
+ }
+ }
+
+ // Get the tet configuration at edge cd.
+ enextfnext(abcd, dcba); // dcba = bcda
+ esymself(dcba); // dcba = cbda
+ enext2self(dcba);
+ enext2fnext(abcd, cdab); // cdab = cadb
+ esymself(cdab); // cdab = acdb
+ enextself(cdab);
+ sym(dcba, bcdcasing);
+ sym(cdab, cadcasing);
+ tsspivot(&dcba, &cdseg);
+ // Is edge cd a subsegment?
+ if (cdseg.sh == dummysh) {
+ // Can 'abcd' be peeled off?
+ if ((bcdcasing.tet == dummytet) && (cadcasing.tet == dummytet)) {
+ removetetbypeeloff(&cdab, flipqueue);
+ return true;
+ }
+ // Can edge 'cd' be flipped away?
+ if (oppo(bcdcasing) == oppo(cadcasing)) {
+ removetetbyflip32(&cdab, flipqueue);
+ return true;
+ }
+ }
+
+ if ((abseg.sh != dummysh) && (cdseg.sh != dummysh)) {
+ // Two crossing segments in one tet. This may be a error in the PLC.
+ printf("Warning: Segments (%d, %d) and (%d, %d) are cross each other.\n",
+ pointmark(org(abcd)), pointmark(dest(abcd)), pointmark(apex(abcd)),
+ pointmark(oppo(abcd)));
+ } else if (abseg.sh != dummysh) {
+ // ab is a segment, cd is an internal edge but not flippable.
+ } else if (cdseg.sh != dummysh) {
+ // cd is a segment, ab is an internal edge but not flippable.
+ }
+
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// talldegetets() Queue all the degenerate tetrahedra in the mesh. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::talldegetets(list* degetetlist)
+{
+ triface tetloop;
+
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ checktet4dege(&tetloop, degetetlist);
+ tetloop.tet = tetrahedrontraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// removedegetets() Repair mesh by removing degenerate elements. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::repairdegetets()
+{
+ list *degetetlist;
+ queue *flipqueue;
+ badface *degetet;
+ int total, counter, i;
+
+ if (!b->quiet) {
+ printf("Removing degenerate tets.\n");
+ }
+
+ // Initialize the pool of bad tetrahedra.
+ degetetlist = new list(sizeof(badface), NULL, 1024);
+ total = 0;
+
+ // Find all degenerate tetrahedra.
+ talldegetets(degetetlist);
+ do {
+ // Initialize the counter of removed tets.
+ counter = 0;
+ for (i = 0; i < degetetlist->len(); i++) {
+ degetet = (badface *)(* degetetlist)[i];
+ if (!isdead(°etet->tt) && (org(degetet->tt) == degetet->forg) &&
+ (dest(degetet->tt) == degetet->fdest) &&
+ (apex(degetet->tt) == degetet->fapex) &&
+ (oppo(degetet->tt) == degetet->foppo)) {
+ if (finddiagonal(&(degetet->tt))) {
+ if (removekite(&(degetet->tt), NULL)) counter++;
+ }
+ }
+ }
+ if (counter == 0) {
+ // No degenerate tet is removed.
+ if (b->verbose && (degetetlist->len() > 0)) {
+ printf("Warning: %d degenerate tets survived.\n", degetetlist->len());
+ }
+ break;
+ }
+ // Accumulate the number of removed elements.
+ total += counter;
+ // Some degenerate tets are removed. Continue the loop.
+ degetetlist->clear();
+ talldegetets(degetetlist);
+ } while (degetetlist->len() > 0);
+
+ if (total > 0) {
+ // Some faces may become non-Delaunay. Check and correct them.
+ flipqueue = new queue(sizeof(badface));
+ checkdelaunay(0.0, flipqueue);
+ if (!flipqueue->empty()) {
+ // Call flip algorithm to recover Delaunayness.
+ flip(flipqueue, NULL, false, false, false);
+ }
+ delete flipqueue;
+ }
+
+ if (b->verbose) {
+ printf(" %ld degeneracies are removed.\n", total);
+ }
+
+ delete degetetlist;
+}
+
+//
+// End of mesh repair routines
+//
+
+//
+// Begin of Delaunay refinement routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// initializerpsarray() Initialize the 'rpsarray'. //
+// //
+// Calculate the initial radii of protecting spheres for all acute vertices. //
+// During Delaunay refinement, each acute vertex v is protected by a sphere //
+// S(v, r), no point should be added inside S(v). The radius r is chosen as //
+// follows: Let w be another vertex connecting to v, (a) if w is acute, then //
+// r_w = 1/3 |vw|; (b) is w is not acute, then r_w = 1/2 |vw|. r = min{r_w}. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::initializerpsarray()
+{
+ list *neightetlist;
+ tetrahedron tetptr;
+ triface starttet, neightet;
+ point pointloop, workpt[3];
+ REAL rps, len;
+ int i, j;
+
+ if (b->verbose) {
+ printf(" Initializing protecting spheres.\n");
+ }
+
+ // Initialize the point2tet field of each point.
+ points->traversalinit();
+ pointloop = pointtraverse();
+ while (pointloop != (point) NULL) {
+ setpoint2tet(pointloop, (tetrahedron) NULL);
+ pointloop = pointtraverse();
+ }
+ // Construct a map from points to tetrahedra.
+ makepoint2tetmap();
+ // Initialize 'neightetlist'.
+ neightetlist = new list(sizeof(triface), NULL, 256);
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ while (pointloop != (point) NULL) {
+ tetptr = point2tet(pointloop);
+ // Only calculate lfs(p) if it is acute and is not dangling.
+ if ((pointtype(pointloop) == ACUTEVERTEX) &&
+ (tetptr != (tetrahedron) NULL)) {
+ decode(tetptr, starttet);
+ assert((starttet.tet != NULL) && (starttet.tet != dummytet));
+ // Find all tetrahedra sharing 'pointloop'.
+ findorg(&starttet, pointloop);
+ infect(starttet);
+ neightetlist->append(&starttet);
+ for (i = 0; i < neightetlist->len(); i++) {
+ starttet = * (triface *)(* neightetlist)[i];
+ assert(infected(starttet));
+ // The origin of 'starttet' should be 'pointloop'.
+ adjustedgering(starttet, CCW);
+ if (org(starttet) != pointloop) {
+ enextself(starttet);
+ }
+ assert(org(starttet) == pointloop);
+ // Let 'starttet' be the opposite face of 'pointloop'.
+ enextfnextself(starttet);
+ assert(oppo(starttet) == pointloop);
+ // Get three neighbors of faces having 'pointloop'.
+ adjustedgering(starttet, CCW);
+ for (j = 0; j < 3; j++) {
+ fnext(starttet, neightet);
+ symself(neightet);
+ // Add it into list if is is not outer space and not infected.
+ if ((neightet.tet != dummytet) && !infected(neightet)) {
+ findorg(&neightet, pointloop);
+ infect(neightet);
+ neightetlist->append(&neightet);
+ }
+ enextself(starttet);
+ }
+ }
+ // 'neightetlist' contains all tetrahedra sharing at 'pointloop'.
+ rps = longest;
+ for (i = 0; i < neightetlist->len(); i++) {
+ starttet = * (triface *)(* neightetlist)[i];
+ assert(org(starttet) == pointloop);
+ workpt[0] = dest(starttet);
+ workpt[1] = apex(starttet);
+ workpt[2] = oppo(starttet);
+ for (j = 0; j < 3; j++) {
+ len = distance(workpt[j], pointloop);
+ if (pointtype(workpt[j]) == ACUTEVERTEX) {
+ len /= 3.0;
+ } else {
+ len /= 2.0;
+ }
+ if (len < rps) rps = len;
+ }
+ }
+ // Return the local feature size of pointloop.
+ rpsarray[pointmark(pointloop)] = rps;
+ // Uninfect tetrahedra and clear 'neightetlist'.
+ for (i = 0; i < neightetlist->len(); i++) {
+ starttet = * (triface *)(* neightetlist)[i];
+ uninfect(starttet);
+ }
+ neightetlist->clear();
+ }
+ pointloop = pointtraverse();
+ }
+
+ delete neightetlist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// marksharpsubfaces() Mark all sharp subfaces. //
+// //
+// A subface is sharp if it belongs to a facet which forms an acute dihedral //
+// angle (< 'dihedbound', given in degrees) with other facets. It is marked //
+// as SHARPSUB. (May be SHARPSKINNYSUB later by markskinnysubfaces().) //
+// //
+// This procedure operates in two phases. The first phase finds some sharp //
+// subfaces by checking the dihedral angles of facets around segments. The //
+// second phase finds all sharp subfaces by a neighbor-first search. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::marksharpsubfaces(REAL dihedbound)
+{
+ list *incishlist, *sharpshlist;
+ triface adjtet;
+ face startsh, spinsh, neighsh;
+ face segloop, prevseg, checkseg;
+ point eorg, edest;
+ REAL small, angle;
+ int i, j;
+
+ if (b->verbose) {
+ printf(" Marking sharp subfaces.\n");
+ }
+
+ small = dihedbound * PI / 180.;
+ // Initial working lists.
+ incishlist = new list(sizeof(face), NULL, 256);
+ sharpshlist = new list(sizeof(face), NULL, subfaces->items);
+
+ // Loop the set of segments, collect some sharp subfaces.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ // A segment may be split into many subsegments, Operate the one which
+ // contains the origin of the segment.
+ segloop.shver = 0;
+ senext2(segloop, prevseg);
+ spivotself(prevseg);
+ if (prevseg.sh == dummysh) {
+ // Operate on this subsegment.
+ segloop.shver = 0;
+ spivot(segloop, startsh);
+ assert(startsh.sh != dummysh);
+ spivot(startsh, spinsh);
+ if (spinsh.sh != startsh.sh) {
+ // This subface is not self-bonded.
+ eorg = sorg(segloop);
+ edest = sdest(segloop);
+ // Get all incident subfaces around 'segloop'.
+ spinsh = startsh;
+ do {
+ if (sorg(spinsh) != eorg) {
+ sesymself(spinsh);
+ }
+ incishlist->append(&spinsh);
+ spivotself(spinsh);
+ } while (spinsh.sh != startsh.sh);
+ // Check the pair of adjacent subfaces for small angle.
+ spinsh = * (face *)(* incishlist)[0];
+ for (i = 1; i <= incishlist->len(); i++) {
+ if (i == incishlist->len()) {
+ neighsh = * (face *)(* incishlist)[0];
+ } else {
+ neighsh = * (face *)(* incishlist)[i];
+ }
+ // Only do test when the side spinsh is faceing inward.
+ stpivot(spinsh, adjtet);
+ if (adjtet.tet != dummytet) {
+ angle = facedihedral(eorg, edest, sapex(spinsh), sapex(neighsh));
+ // Is angle acute?
+ if (angle < small) {
+ // Has spinsh been marked?
+ if (shelltype(spinsh) != SHARPSUB) {
+ setshelltype(spinsh, SHARPSUB);
+ sharpshlist->append(&spinsh);
+ }
+ // Has neighsh been marked?
+ if (shelltype(neighsh) != SHARPSUB) {
+ setshelltype(neighsh, SHARPSUB);
+ sharpshlist->append(&neighsh);
+ }
+ }
+ }
+ spinsh = neighsh;
+ }
+ incishlist->clear();
+ }
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+
+ // Next finds all sharp subfaces.
+ for (i = 0; i < sharpshlist->len(); i++) {
+ startsh = * (face *)(* sharpshlist)[i];
+ assert(shelltype(startsh) == SHARPSUB);
+ for (j = 0; j < 3; j++) {
+ sspivot(startsh, checkseg);
+ if (checkseg.sh == dummysh) {
+ spivot(startsh, neighsh);
+ if (shelltype(neighsh) != SHARPSUB) {
+ setshelltype(neighsh, SHARPSUB);
+ sharpshlist->append(&neighsh);
+ }
+ }
+ senextself(startsh);
+ }
+ }
+
+ if (b->verbose) {
+ printf(" %d subfaces have been marked.\n", sharpshlist->len());
+ }
+
+ delete incishlist;
+ delete sharpshlist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// markskinnysubfaces() Mark all skinny subfaces. //
+// //
+// A subface is skinny if it has an angle smaller than 'anglebound' and the //
+// two edges form the angle are both segments. Such subface is not be able //
+// to refine. It will be marked as type SKINNYSUB or SHARPSKINNYSUB. //
+// //
+// This procedure operates in two phases. The first phase finds some skinny //
+// subfaces by checking the angles of subfaces. The second phase finds all //
+// skinny subfaces by a neighbor-first search. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::markskinnysubfaces(REAL anglebound)
+{
+ list *skinnyshlist;
+ face subloop, checksub;
+ face startsh, neighsh;
+ face seg1, seg2, checkseg;
+ point pa, pb, pc;
+ enum shestype shty;
+ REAL small, angle;
+ int i, j;
+
+ if (b->verbose) {
+ printf(" Marking skinny subfaces.\n");
+ }
+
+ small = anglebound * PI / 180.;
+ // Initial working list.
+ skinnyshlist = new list(sizeof(face), NULL, subfaces->items);
+
+ // Loop the set of subfaces, collect some which are skinny.
+ subfaces->traversalinit();
+ subloop.sh = shellfacetraverse(subfaces);
+ while (subloop.sh != (shellface *) NULL) {
+ // Check the three angles of subloop;
+ for (i = 0; i < 3; i++) {
+ sspivot(subloop, seg1);
+ if (seg1.sh != dummysh) {
+ senext2(subloop, checksub);
+ sspivot(checksub, seg2);
+ if (seg2.sh != dummysh) {
+ pa = sorg(subloop);
+ pb = sdest(subloop);
+ pc = sapex(subloop);
+ angle = interiorangle(pa, pb, pc, NULL);
+ if (angle < small) {
+ // It is skinny!
+ if (shelltype(subloop) == SHARPSUB) {
+ setshelltype(subloop, SHARPSKINNYSUB);
+ } else {
+ setshelltype(subloop, SKINNYSUB);
+ }
+ skinnyshlist->append(&subloop);
+ break;
+ }
+ }
+ }
+ senextself(subloop);
+ }
+ subloop.sh = shellfacetraverse(subfaces);
+ }
+
+ // Next finds all skinny subfaces.
+ for (i = 0; i < skinnyshlist->len(); i++) {
+ startsh = * (face *)(* skinnyshlist)[i];
+ shty = shelltype(startsh);
+ assert((shty == SKINNYSUB) || (shty == SHARPSKINNYSUB));
+ for (j = 0; j < 3; j++) {
+ sspivot(startsh, checkseg);
+ if (checkseg.sh == dummysh) {
+ spivot(startsh, neighsh);
+ if (shelltype(neighsh) != shty) {
+ setshelltype(neighsh, shty);
+ skinnyshlist->append(&neighsh);
+ }
+ }
+ senextself(startsh);
+ }
+ }
+
+ if (b->verbose) {
+ printf(" %d subfaces have been marked.\n", skinnyshlist->len());
+ }
+
+ delete skinnyshlist;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// dequeuebadtet() Remove a tetrahedron from the front of the queue. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::badface* tetgenmesh::dequeuebadtet()
+{
+ badface *result;
+ int queuenumber;
+
+ // Look for a nonempty queue.
+ for (queuenumber = 63; queuenumber >= 0; queuenumber--) {
+ result = tetquefront[queuenumber];
+ if (result != (badface *) NULL) {
+ // Remove the tetrahedron from the queue.
+ tetquefront[queuenumber] = result->nextitem;
+ // Maintain a pointer to the NULL pointer at the end of the queue.
+ if (tetquefront[queuenumber] == (badface *) NULL) {
+ tetquetail[queuenumber] = &tetquefront[queuenumber];
+ }
+ return result;
+ }
+ }
+ return (badface *) NULL;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkseg4encroach() Check a subsegment to see if it is encroached. //
+// //
+// A subsegment is encroached if there is a vertex in its diametral circle //
+// (that is, the subsegment faces an angle greater than 90 degrees). //
+// //
+// If 'testpt' is not NULL, only check whether 'testseg' is encroached by it //
+// or not. Otherwise, check all apexes of faces in mesh containing 'testseg'.//
+// If 'pencpt' is not NULL, return the encroaching point if it exists. //
+// //
+// If testseg is found be encroached, add it into 'badsubsegs' if 'enqflag' //
+// is TRUE. Return TRUE if testseg is encroached, otherwise return FALSE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::
+checkseg4encroach(face* testseg, point testpt, point* pencpt, bool enqflag)
+{
+ badface *encsubseg;
+ triface starttet, spintet;
+ point eorg, edest, eapex, encpt;
+ REAL cent[3], radius, dist, diff;
+ bool enq;
+ int hitbdry;
+
+ eorg = sorg(*testseg);
+ edest = sdest(*testseg);
+ cent[0] = 0.5 * (eorg[0] + edest[0]);
+ cent[1] = 0.5 * (eorg[1] + edest[1]);
+ cent[2] = 0.5 * (eorg[2] + edest[2]);
+ radius = distance(cent, eorg);
+
+ enq = false;
+ encpt = (point) NULL;
+ if (testpt == (point) NULL) {
+ // Check if it is encroached by traversing all faces containing it.
+ sstpivot(testseg, &starttet);
+ eapex = apex(starttet);
+ spintet = starttet;
+ hitbdry = 0;
+ do {
+ dist = distance(cent, apex(spintet));
+ diff = dist - radius;
+ if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
+ if (diff < 0.0) {
+ enq = true;
+ encpt = apex(spintet);
+ break;
+ }
+ if (!fnextself(spintet)) {
+ hitbdry++;
+ if (hitbdry < 2) {
+ esym(starttet, spintet);
+ if (!fnextself(spintet)) {
+ hitbdry++;
+ }
+ }
+ }
+ } while (apex(spintet) != eapex && (hitbdry < 2));
+ } else {
+ // Only check if 'testseg' is encroached by 'testpt'.
+ dist = distance(cent, testpt);
+ diff = dist - radius;
+ if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
+ enq = diff < 0.0;
+ }
+
+ if (enq && enqflag) {
+ if (b->verbose > 2) {
+ printf(" Queuing encroaching subsegment (%d, %d).\n",
+ pointmark(eorg), pointmark(edest));
+ }
+ encsubseg = (badface *) badsubsegs->alloc();
+ encsubseg->ss = *testseg;
+ encsubseg->forg = eorg;
+ encsubseg->fdest = edest;
+ encsubseg->foppo = encpt;
+ // Set the pointer of 'encsubseg' into 'testseg'. It has two purposes:
+ // (1) We can regonize it is encroached; (2) It is uniquely queued.
+ setshell2badface(encsubseg->ss, encsubseg);
+ }
+
+ if (pencpt != (point *) NULL) {
+ *pencpt = encpt;
+ }
+
+ return enq;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checksub4encroach() Check a subface to see if it is encroached. //
+// //
+// A subface is encroached if there is a vertex in its diametral sphere. If //
+// 'testpt != NULL', only test if 'testsub' is encroached by it. Otherwise, //
+// test the opposites of the adjoining tetrahedra of 'testsub'. //
+// //
+// If testsub is found be encroached, add it into 'badsubfacess' if 'enqflag'//
+// is TRUE. Return TRUE if testsub is encroached, otherwise return FALSE. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checksub4encroach(face* testsub, point testpt, bool enqflag)
+{
+ badface *encsub;
+ triface abuttet;
+ point forg, fdest, fapex, encpt;
+ REAL cent[3], radius, dist, diff;
+ bool enq, ncollinear;
+ int i;
+
+ forg = sorg(*testsub);
+ fdest = sdest(*testsub);
+ fapex = sapex(*testsub);
+ ncollinear = circumsphere(forg, fdest, fapex, NULL, cent, &radius);
+ assert(ncollinear == true);
+
+ enq = false;
+ encpt = (point) NULL;
+ if (testpt == (point) NULL) {
+ stpivot(*testsub, abuttet);
+ if (abuttet.tet != dummytet) {
+ dist = distance(cent, oppo(abuttet));
+ diff = dist - radius;
+ if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
+ enq = diff < 0.0;
+ if (enq) encpt = oppo(abuttet);
+ }
+ if (!enq) {
+ sesymself(*testsub);
+ stpivot(*testsub, abuttet);
+ if (abuttet.tet != dummytet) {
+ dist = distance(cent, oppo(abuttet));
+ diff = dist - radius;
+ if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
+ enq = diff < 0.0;
+ if (enq) encpt = oppo(abuttet);
+ }
+ }
+ } else {
+ // Only do test when 'testpt' is not one of its corners.
+ if (testpt != forg && testpt != fdest && testpt != fapex) {
+ dist = distance(cent, testpt);
+ diff = dist - radius;
+ if (fabs(diff) / radius <= b->epsilon) diff = 0.0; // Rounding.
+ enq = diff < 0.0;
+ }
+ }
+
+ if (enq && enqflag) {
+ encsub = (badface *) badsubfaces->alloc();
+ encsub->ss = *testsub;
+ encsub->forg = sorg(*testsub);
+ encsub->fdest = sdest(*testsub);
+ encsub->fapex = sapex(*testsub);
+ encsub->foppo = encpt;
+ for (i = 0; i < 3; i++) encsub->cent[i] = cent[i];
+ encsub->nextitem = (badface *) NULL;
+ // Set the pointer of 'encsubseg' into 'testsub'. It has two purposes:
+ // (1) We can regonize it is encroached; (2) It is uniquely queued.
+ setshell2badface(encsub->ss, encsub);
+ // Add the subface to the end of a queue (quenumber = 0, low priority).
+ *subquetail[0] = encsub;
+ // Maintain a pointer to the NULL pointer at the end of the queue.
+ subquetail[0] = &encsub->nextitem;
+ if (b->verbose > 2) {
+ printf(" Queuing encroached subface (%d, %d, %d).\n",
+ pointmark(forg), pointmark(fdest), pointmark(fapex));
+ }
+ }
+
+ return enq;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkseg4badqual() Check if a segment is longer than it is allowed. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checkseg4badqual(face* testseg, bool enqflag)
+{
+ badface *encsubseg;
+ point eorg, edest;
+ REAL dist;
+ bool enq;
+
+ eorg = sorg(*testseg);
+ edest = sdest(*testseg);
+ dist = distance(eorg, edest);
+
+ enq = dist > areabound(*testseg);
+
+ if (enq && enqflag) {
+ if (b->verbose > 2) {
+ printf(" Queuing badqual subsegment (%d, %d).\n",
+ pointmark(eorg), pointmark(edest));
+ }
+ encsubseg = (badface *) badsubsegs->alloc();
+ encsubseg->ss = *testseg;
+ encsubseg->forg = eorg;
+ encsubseg->fdest = edest;
+ encsubseg->foppo = NULL;
+ // Set the pointer of 'encsubseg' into 'testseg'. It has two purposes:
+ // (1) We can regonize it is encroached; (2) It is uniquely queued.
+ setshell2badface(encsubseg->ss, encsubseg);
+ }
+
+ return enq;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checksub4badqual() Test if the quality of a subface is bad. //
+// //
+// A subface has bad quality if: (1) its minimum internal angle is smaller //
+// than 20 degree; or (2) its area is larger than a maximum area condition. //
+// Return TRUE if it is bad. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checksub4badqual(face* testsub, bool enqflag)
+{
+ badface *encsub;
+ face sametestsub;
+ face subseg1, subseg2;
+ point torg, tdest, tapex;
+ point anglevertex;
+ REAL dxod, dyod, dzod;
+ REAL dxda, dyda, dzda;
+ REAL dxao, dyao, dzao;
+ REAL dxod2, dyod2, dzod2;
+ REAL dxda2, dyda2, dzda2;
+ REAL dxao2, dyao2, dzao2;
+ REAL apexlen, orglen, destlen;
+ REAL angle, area;
+ bool enq;
+ int i;
+
+ enq = false;
+ torg = sorg(*testsub);
+ tdest = sdest(*testsub);
+ tapex = sapex(*testsub);
+ dxod = torg[0] - tdest[0];
+ dyod = torg[1] - tdest[1];
+ dzod = torg[2] - tdest[2];
+ dxda = tdest[0] - tapex[0];
+ dyda = tdest[1] - tapex[1];
+ dzda = tdest[2] - tapex[2];
+ dxao = tapex[0] - torg[0];
+ dyao = tapex[1] - torg[1];
+ dzao = tapex[2] - torg[2];
+ dxod2 = dxod * dxod;
+ dyod2 = dyod * dyod;
+ dzod2 = dzod * dzod;
+ dxda2 = dxda * dxda;
+ dyda2 = dyda * dyda;
+ dzda2 = dzda * dzda;
+ dxao2 = dxao * dxao;
+ dyao2 = dyao * dyao;
+ dzao2 = dzao * dzao;
+ // Find the lengths of the triangle's three edges.
+ apexlen = dxod2 + dyod2 + dzod2;
+ orglen = dxda2 + dyda2 + dzda2;
+ destlen = dxao2 + dyao2 + dzao2;
+ if ((apexlen < orglen) && (apexlen < destlen)) {
+ // The edge opposite the apex is shortest.
+ // Find the square of the cosine of the angle at the apex.
+ angle = dxda * dxao + dyda * dyao + dzda * dzao;
+ angle = angle * angle / (orglen * destlen);
+ anglevertex = tapex;
+ senext(*testsub, sametestsub);
+ sspivot(sametestsub, subseg1);
+ senext2(*testsub, sametestsub);
+ sspivot(sametestsub, subseg2);
+ } else if (orglen < destlen) {
+ // The edge opposite the origin is shortest.
+ // Find the square of the cosine of the angle at the origin.
+ angle = dxod * dxao + dyod * dyao + dzod * dzao;
+ angle = angle * angle / (apexlen * destlen);
+ anglevertex = torg;
+ sspivot(*testsub, subseg1);
+ senext2(*testsub, sametestsub);
+ sspivot(sametestsub, subseg2);
+ } else {
+ // The edge opposite the destination is shortest.
+ // Find the square of the cosine of the angle at the destination.
+ angle = dxod * dxda + dyod * dyda + dzod * dzda;
+ angle = angle * angle / (apexlen * orglen);
+ anglevertex = tdest;
+ sspivot(*testsub, subseg1);
+ senext(*testsub, sametestsub);
+ sspivot(sametestsub, subseg2);
+ }
+
+ // Check if both edges that form the angle are segments.
+ if ((subseg1.sh != dummysh) && (subseg2.sh != dummysh)) {
+ // The angle is a segment intersection. Don't add this bad subface to
+ // the list; there's nothing that can be done about a small angle
+ // between two segments.
+ angle = 0.0;
+ }
+
+ // Check whether the angle is smaller than permitted.
+ if (angle > b->goodangle) {
+ enq = true;
+ }
+
+ if (!enq && varconstraint && areabound(*testsub) > 0.0) {
+ // Check whether the area is larger than desired. A variation form of
+ // Heron's formula which only uses the squares of the edge lengthes
+ // is used to calculated the area of a 3D triangle.
+ area = apexlen + orglen - destlen;
+ area = area * area;
+ area = 4 * apexlen * orglen - area;
+ area = 0.25 * sqrt(fabs(area));
+ enq = area > areabound(*testsub);
+ }
+
+ if (enq && enqflag) {
+ encsub = (badface *) badsubfaces->alloc();
+ encsub->ss = *testsub;
+ encsub->forg = sorg(*testsub);
+ encsub->fdest = sdest(*testsub);
+ encsub->fapex = sapex(*testsub);
+ encsub->foppo = (point) NULL;
+ // Circumcent of testsub is not available. Only initialize it.
+ for (i = 0; i < 3; i++) encsub->cent[i] = 0.0;
+ encsub->nextitem = (badface *) NULL;
+ // Set the pointer of 'encsubseg' into 'testsub'. It has two purposes:
+ // (1) We can regonize it is encroached; (2) It is uniquely queued.
+ setshell2badface(encsub->ss, encsub);
+ // Add the subface to the end of a queue (quenumber = 1, high priority).
+ *subquetail[1] = encsub;
+ // Maintain a pointer to the NULL pointer at the end of the queue.
+ subquetail[1] = &encsub->nextitem;
+ if (b->verbose > 2) {
+ printf(" Queuing badqual subface (%d, %d, %d).\n", pointmark(torg),
+ pointmark(tdest), pointmark(tapex));
+ }
+ }
+
+ return enq;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checktet4badqual() Test a tetrahedron for quality measures. //
+// //
+// Tests a tetrahedron to see if it satisfies the minimum ratio condition //
+// and the maximum volume condition. Tetrahedra that aren't upto spec are //
+// added to the bad tetrahedron queue. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checktet4badqual(triface* testtet, bool enqflag)
+{
+ badface *newbadtet;
+ point torg, tdest, tapex, toppo;
+ REAL dxod, dyod, dzod, dxda, dyda, dzda, dxao, dyao, dzao;
+ REAL dxop, dyop, dzop, dxdp, dydp, dzdp, dxap, dyap, dzap;
+ REAL dxod2, dyod2, dzod2, dxda2, dyda2, dzda2, dxao2, dyao2, dzao2;
+ REAL dxop2, dyop2, dzop2, dxdp2, dydp2, dzdp2, dxap2, dyap2, dzap2;
+ REAL dxoc, dyoc, dzoc, dxoc2, dyoc2, dzoc2;
+ REAL elen[6], circumcent[3];
+ REAL smlen, volume;
+ REAL radius, ratio2;
+ bool enq;
+ int queuenumber;
+ int i;
+
+ torg = org(*testtet);
+ tdest = dest(*testtet);
+ tapex = apex(*testtet);
+ toppo = oppo(*testtet);
+
+ dxod = torg[0] - tdest[0];
+ dyod = torg[1] - tdest[1];
+ dzod = torg[2] - tdest[2];
+ dxda = tdest[0] - tapex[0];
+ dyda = tdest[1] - tapex[1];
+ dzda = tdest[2] - tapex[2];
+ dxao = tapex[0] - torg[0];
+ dyao = tapex[1] - torg[1];
+ dzao = tapex[2] - torg[2];
+
+ dxop = torg[0] - toppo[0];
+ dyop = torg[1] - toppo[1];
+ dzop = torg[2] - toppo[2];
+ dxdp = tdest[0] - toppo[0];
+ dydp = tdest[1] - toppo[1];
+ dzdp = tdest[2] - toppo[2];
+ dxap = tapex[0] - toppo[0];
+ dyap = tapex[1] - toppo[1];
+ dzap = tapex[2] - toppo[2];
+
+ dxod2 = dxod * dxod;
+ dyod2 = dyod * dyod;
+ dzod2 = dzod * dzod;
+ dxda2 = dxda * dxda;
+ dyda2 = dyda * dyda;
+ dzda2 = dzda * dzda;
+ dxao2 = dxao * dxao;
+ dyao2 = dyao * dyao;
+ dzao2 = dzao * dzao;
+
+ dxop2 = dxop * dxop;
+ dyop2 = dyop * dyop;
+ dzop2 = dzop * dzop;
+ dxdp2 = dxdp * dxdp;
+ dydp2 = dydp * dydp;
+ dzdp2 = dzdp * dzdp;
+ dxap2 = dxap * dxap;
+ dyap2 = dyap * dyap;
+ dzap2 = dzap * dzap;
+
+ // Find the smallest edge length of 'testtet'.
+ elen[0] = dxod2 + dyod2 + dzod2;
+ elen[1] = dxda2 + dyda2 + dzda2;
+ elen[2] = dxao2 + dyao2 + dzao2;
+ elen[3] = dxop2 + dyop2 + dzop2;
+ elen[4] = dxdp2 + dydp2 + dzdp2;
+ elen[5] = dxap2 + dyap2 + dzap2;
+ smlen = elen[0];
+ for (i = 1; i < 6; i++) {
+ if (smlen > elen[i]) {
+ smlen = elen[i];
+ }
+ }
+
+ // Find the circumcenter and circumradius of 'testtet'.
+ circumsphere(torg, tdest, tapex, toppo, circumcent, NULL);
+ dxoc = torg[0] - circumcent[0];
+ dyoc = torg[1] - circumcent[1];
+ dzoc = torg[2] - circumcent[2];
+ dxoc2 = dxoc * dxoc;
+ dyoc2 = dyoc * dyoc;
+ dzoc2 = dzoc * dzoc;
+ radius = dxoc2 + dyoc2 + dzoc2;
+
+ // Calculate the square of radius-edge ratio.
+ ratio2 = radius / smlen;
+ // Check whether the ratio is smaller than permitted.
+ enq = ratio2 > b->goodratio;
+ if (!enq && (b->varvolume || b->fixedvolume)) {
+ // The tet is in good shape.
+ ratio2 = 0.0;
+ // It will get split if it's volume is larger than permitted.
+ volume = orient3d(torg, tdest, tapex, toppo);
+ if (volume < 0) volume = -volume;
+ volume /= 6.0;
+ enq = b->fixedvolume && (volume > b->maxvolume);
+ if (!enq && b->varvolume) {
+ enq = (volume > volumebound(testtet->tet)) &&
+ (volumebound(testtet->tet) > 0.0);
+ }
+ }
+
+ if (enq && enqflag) {
+ // Allocate space for the bad tetrahedron.
+ newbadtet = (badface *) badtetrahedrons->alloc();
+ newbadtet->tt = *testtet;
+ newbadtet->key = ratio2;
+ newbadtet->cent[0] = circumcent[0];
+ newbadtet->cent[1] = circumcent[1];
+ newbadtet->cent[2] = circumcent[2];
+ newbadtet->forg = torg;
+ newbadtet->fdest = tdest;
+ newbadtet->fapex = tapex;
+ newbadtet->foppo = toppo;
+ newbadtet->nextitem = (badface *) NULL;
+ // Determine the appropriate queue to put the bad tetrahedron into.
+ if (ratio2 > b->goodratio) {
+ queuenumber = (int) ((ratio2 - b->goodratio) / 0.5);
+ // 'queuenumber' may overflow (negative) caused by a very large ratio.
+ if ((queuenumber > 63) || (queuenumber < 0)) {
+ queuenumber = 63;
+ }
+ } else {
+ // It's not a bad ratio; put the tet in the lowest-priority queue.
+ queuenumber = 0;
+ }
+ // Add the tetrahedron to the end of a queue.
+ *tetquetail[queuenumber] = newbadtet;
+ // Maintain a pointer to the NULL pointer at the end of the queue.
+ tetquetail[queuenumber] = &newbadtet->nextitem;
+ if (b->verbose > 2) {
+ printf(" Queueing bad tet: (%d, %d, %d, %d), ratio %g, qnum %d.\n",
+ pointmark(torg), pointmark(tdest), pointmark(tapex),
+ pointmark(toppo), sqrt(ratio2), queuenumber);
+ }
+ }
+
+ return enq;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checktet4sliver() Test a tetrahedron to see if it is a sliver. //
+// //
+// A tetrahedron is a sliver if it is not in bad quality with respect to the //
+// radius-edge ratio, but contains large dihedral angle (> 175 degree). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checktet4sliver(triface* testtet, bool enqflag)
+{
+ badface *newbadtet;
+ point pa, pb, pc, pd;
+ REAL da[6], maxdihedral;
+ bool enq;
+ int i;
+
+ maxdihedral = 170.0 / 180.0 * PI;
+ enq = false;
+ if (!checktet4badqual(testtet, false)) {
+ pa = org(*testtet);
+ pb = dest(*testtet);
+ pc = apex(*testtet);
+ pd = oppo(*testtet);
+ tetalldihedral(pa, pb, pc, pd, da);
+ for (i = 0; i < 6; i++) {
+ enq = da[i] > maxdihedral;
+ if (enq) break;
+ }
+ }
+
+ if (enq && enqflag) {
+ // Allocate space for the bad tetrahedron.
+ newbadtet = (badface *) badtetrahedrons->alloc();
+ newbadtet->tt = *testtet;
+ newbadtet->key = da[i];
+ newbadtet->cent[0] = 0.0;
+ newbadtet->cent[1] = 0.0;
+ newbadtet->cent[2] = 0.0;
+ newbadtet->forg = pa;
+ newbadtet->fdest = pb;
+ newbadtet->fapex = pc;
+ newbadtet->foppo = pd;
+ newbadtet->nextitem = (badface *) NULL;
+ if (b->verbose > 2) {
+ printf(" Queueing sliver: (%d, %d, %d, %d) %.12g.\n", pointmark(pa),
+ pointmark(pb), pointmark(pc), pointmark(pd), da[i] / PI * 180.0);
+ }
+ }
+
+ return enq;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkseg4splitting() Check an encroached subsegment to see if it is //
+// suitable to be split. //
+// //
+// Segment(ab) is encroached by an existing vertex or rejected circumcenter //
+// of a subface. It can be split if it satifies the following cases: //
+// (1) if ab is encroached by an existing vertex; else //
+// (2) if ab is too long wrt the edge constraint; else //
+// (3) if ab not belongs to a skinny subface, then split it if: //
+// (a) both a and b are acute or nonacute; else, //
+// (b) assume a is acute, it can be split if |ab| > rps(a) / 2.0. //
+// (4) When the facet constraint is in use. If there is a constrained //
+// subface s containing ab, and |ab|^2 > a, a is the area bound of a. //
+// (5) When the volume costraint (-a) is in use. If there is a constrained //
+// tet t containg ab, and |ab|^3 > v, v is the volume bound of t. //
+// The perpose of using values |ab|^2 and |ab|^3 instead of area and volume //
+// is to avoid resulting too skinny triangles and tetrahedron. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checkseg4splitting(face* testseg, point* pencpt)
+{
+ triface spintet;
+ face parentsh, spinsh;
+ point eorg, edest, fapex;
+ bool acuteorg, acutedest;
+ REAL rpslimit, L, L2, L3;
+ enum shestype shty;
+ bool skinny;
+ int ptidx;
+
+ *pencpt = (point) NULL;
+
+ // Is it encroached by an existing vertex?
+ if (checkseg4encroach(testseg, NULL, pencpt, false)) {
+ assert(*pencpt != (point) NULL);
+ return true;
+ }
+
+ eorg = sorg(*testseg);
+ edest = sdest(*testseg);
+ L = distance(eorg, edest);
+
+ // Is it in badqual?
+ if (varconstraint && (areabound(*testseg) > 0.0)) {
+ return L > areabound(*testseg);
+ }
+
+ // Check if ab belongs to a skinny subface.
+ skinny = false;
+ spivot(*testseg, parentsh);
+ spinsh = parentsh;
+ do {
+ shty = shelltype(spinsh);
+ if ((shty == SKINNYSUB) || (shty == SHARPSKINNYSUB)) {
+ skinny = true; break;
+ }
+ spivotself(spinsh);
+ } while (spinsh.sh != parentsh.sh);
+
+ if (!skinny) {
+ acuteorg = pointtype(eorg) == ACUTEVERTEX;
+ acutedest = pointtype(edest) == ACUTEVERTEX;
+ if ((acuteorg && acutedest) || (!acuteorg && !acutedest)) {
+ // It can be split.
+ return true;
+ }
+ // Now exactly one vertex is acute.
+ assert(acuteorg || acutedest);
+ if (acuteorg) {
+ ptidx = pointmark(eorg);
+ } else {
+ assert(acutedest);
+ ptidx = pointmark(edest);
+ }
+ rpslimit = rpsarray[ptidx] / 2.0;
+ if (L > (rpslimit * 1.1)) {
+ // The edge is not too small, can be split.
+ return true;
+ }
+ // L <= rpslimit.
+ }
+
+ if (varconstraint && in->facetconstraintlist) {
+ // Is there a subface which has too large area?
+ L2 = L * L / 2.0;
+ spinsh = parentsh;
+ do {
+ if ((L2 > areabound(spinsh)) && (areabound(spinsh) > 0.0)) {
+ // This edge is too long wrt the maximum area bound. Split it.
+ return true;
+ }
+ spivotself(spinsh);
+ } while (spinsh.sh != parentsh.sh);
+ }
+
+ // L <= rpslimit. We should not split it. However, it may still be
+ // split if its length is too long wrt. the volume constraints.
+ if (b->varvolume || b->fixedvolume) {
+ L = distance(eorg, edest);
+ L3 = L * L * L / 6.0;
+ if (b->fixedvolume && (L3 > b->maxvolume)) {
+ // This edge is too long wrt. the maximum volume bound. Split it.
+ return true;
+ }
+ if (b->varvolume) {
+ spivot(*testseg, parentsh);
+ if (sorg(parentsh) != eorg) sesymself(parentsh);
+ stpivot(parentsh, spintet);
+ if (spintet.tet == dummytet) {
+ sesymself(parentsh);
+ stpivot(parentsh, spintet);
+ assert(spintet.tet != dummytet);
+ }
+ findedge(&spintet, eorg, edest);
+ fapex = apex(spintet);
+ while (true) {
+ if (!fnextself(spintet)) {
+ // Meet a boundary, walk through it.
+ tspivot(spintet, spinsh);
+ assert(spinsh.sh != dummysh);
+ findedge(&spinsh, eorg, edest);
+ sfnextself(spinsh);
+ stpivot(spinsh, spintet);
+ assert(spintet.tet != dummytet);
+ findedge(&spintet, eorg, edest);
+ }
+ if ((L3 > volumebound(spintet.tet)) &&
+ (volumebound(spintet.tet) > 0.0)) {
+ // This edge is too long wrt the maximum volume bound. Split it.
+ return true;
+ }
+ if (apex(spintet) == fapex) break;
+ }
+ }
+ }
+
+ // Not split it.
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checksub4splitting() Check an encroached subface to see if it is //
+// suitable to be split. //
+// //
+// Subface(abc) is in bad quality, or is encroached by an existing vertex or //
+// by a rejected circumcenter of a tetrahedron. It can be split if: //
+// (1) it is in bad quality (indicated by 'bqual'); else, //
+// (2) it is not in bad quality and not sharp; else, //
+// (3) When the volume costraint (-a) is in use. If there is a tet t //
+// containg abc, and L^3 > vol(t), where L := max{|ab|, |bc|, |ca|}. //
+// The purpose of using L^3 is to avoid resulting too skinny tetrahedron. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::checksub4splitting(face* testsh, bool bqual)
+{
+ triface testtet;
+ point p[3];
+ enum shestype shty;
+ REAL L, L3;
+ int i;
+
+ if (bqual) {
+ return true;
+ } else {
+ shty = shelltype(*testsh);
+ if ((shty != SHARPSUB) && (shty != SHARPSKINNYSUB)) {
+ return true;
+ }
+ }
+
+ if (b->varvolume || b->fixedvolume) {
+ // Check if it is in case (3).
+ p[0] = sorg(*testsh);
+ p[1] = sdest(*testsh);
+ p[2] = sapex(*testsh);
+ // Get the longest edge length of testsh = L.
+ L = distance(p[0], p[1]);
+ L3 = distance(p[1], p[2]);
+ L = (L >= L3 ? L : L3);
+ L3 = distance(p[2], p[0]);
+ L = (L >= L3 ? L : L3);
+
+ L3 = L * L * L / 6.0;
+ if (b->fixedvolume && (L3 > b->maxvolume)) {
+ // This face is too large wrt. the maximum volume bound. Split it.
+ return true;
+ }
+ if (b->varvolume) {
+ for (i = 0; i < 2; i ++) {
+ stpivot(*testsh, testtet);
+ if (testtet.tet != dummytet) {
+ if ((L3 > volumebound(testtet.tet)) &&
+ (volumebound(testtet.tet) > 0.0)) {
+ // This face is too large wrt the maximum volume bound.
+ return true;
+ }
+ }
+ sesymself(*testsh);
+ }
+ }
+ }
+
+ return false;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// doqualchecktetlist() Put bad-quality tetrahedra in 'qualchecktetlist' //
+// into queue and clear it. //
+// //
+// 'qualchecktetlist' stores a list of tetrahedra which are possibly bad- //
+// quality, furthermore, one tetrahedron may appear many times in it. For //
+// testing and queuing each bad-quality tetrahedron only once, infect it //
+// after testing, later on, only test the one which is not infected. On //
+// finish, uninfect them. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::doqualchecktetlist()
+{
+ triface testtet;
+ int i;
+
+ for (i = 0; i < qualchecktetlist->len(); i++) {
+ testtet = * (triface *) (* qualchecktetlist)[i];
+ if (!isdead(&testtet) && !infected(testtet)) {
+ checktet4badqual(&testtet, true);
+ infect(testtet);
+ }
+ }
+ for (i = 0; i < qualchecktetlist->len(); i++) {
+ testtet = * (triface *) (* qualchecktetlist)[i];
+ if (!isdead(&testtet) && infected(testtet)) {
+ uninfect(testtet);
+ }
+ }
+ qualchecktetlist->clear();
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallencsegs() Check for encroached segments, save them in list. //
+// //
+// If 'testpt' is not a NULL, only check if segments are encroached by this //
+// point. Otherwise, check all the nearby mesh vertices. //
+// //
+// If 'cavtetlist' is not a NULL only check the segments in 'cavtetlist' to //
+// see if they're encroached. Otherwise, check the entire list of segments. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::tallencsegs(point testpt, list *cavtetlist)
+{
+ triface starttet, neightet;
+ face checkseg;
+ long oldencnum;
+ int i, j;
+
+ // Remember the current number of encroached segments.
+ oldencnum = badsubsegs->items;
+
+ if (cavtetlist != (list *) NULL) {
+ // Check segments in the list of tetrahedra.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ starttet = * (triface *)(* cavtetlist)[i];
+ infect(starttet); // Indicate it has been tested.
+ sym(starttet, neightet);
+ if (!infected(neightet)) {
+ // Test all three edges of this face.
+ for (j = 0; j < 3; j++) {
+ tsspivot(&starttet, &checkseg);
+ if (checkseg.sh != dummysh) {
+ if (!shell2badface(checkseg)) {
+ checkseg4encroach(&checkseg, testpt, NULL, true);
+ }
+ }
+ enextself(starttet);
+ }
+ }
+ adjustedgering(starttet, CCW);
+ fnext(starttet, neightet);
+ symself(neightet);
+ if ((neightet.tet == dummytet) || !infected(neightet)) {
+ fnext(starttet, neightet);
+ // Test the tow other edges of this face.
+ for (j = 0; j < 2; j++) {
+ enextself(neightet);
+ tsspivot(&neightet, &checkseg);
+ if (checkseg.sh != dummysh) {
+ if (!shell2badface(checkseg)) {
+ checkseg4encroach(&checkseg, testpt, NULL, true);
+ }
+ }
+ }
+ }
+ enextfnext(starttet, neightet);
+ symself(neightet);
+ if ((neightet.tet == dummytet) || !infected(neightet)) {
+ enextfnext(starttet, neightet);
+ // Only test the next edge of this face.
+ enextself(neightet);
+ tsspivot(&neightet, &checkseg);
+ if (checkseg.sh != dummysh) {
+ if (!shell2badface(checkseg)) {
+ checkseg4encroach(&checkseg, testpt, NULL, true);
+ }
+ }
+ }
+ }
+ // Uninfect all tetrahedra in the list.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ starttet = * (triface *)(* cavtetlist)[i];
+ assert(infected(starttet));
+ uninfect(starttet);
+ }
+ } else {
+ // Check the entire list of segments.
+ subsegs->traversalinit();
+ checkseg.sh = shellfacetraverse(subsegs);
+ while (checkseg.sh != (shellface *) NULL) {
+ if (!shell2badface(checkseg)) {
+ checkseg4encroach(&checkseg, testpt, NULL, true);
+ }
+ checkseg.sh = shellfacetraverse(subsegs);
+ }
+ }
+
+ return (badsubsegs->items > oldencnum);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallencsubs() Find all encroached subfaces and save them in list. //
+// //
+// If 'testpt' is not a NULL, only check if subfaces are encroached by this //
+// point. Otherwise, check all the nearby mesh vertices. //
+// //
+// If 'cavtetlist' is not a NULL only check the subfaces in 'cavtetlist' to //
+// see if they're encroached. Otherwise, check the entire list of subfaces. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+bool tetgenmesh::tallencsubs(point testpt, list* cavtetlist)
+{
+ triface starttet, neightet;
+ face checksh;
+ long oldencnum;
+ int i, j;
+
+ // Remember the current number of encroached segments.
+ oldencnum = badsubfaces->items;
+
+ if (cavtetlist != (list *) NULL) {
+ // Check subfaces in the list of tetrahedra.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ starttet = * (triface *)(* cavtetlist)[i];
+ infect(starttet); // Indicate it has been tested.
+ sym(starttet, neightet);
+ if (!infected(neightet)) {
+ // Test if this face is encroached.
+ tspivot(starttet, checksh);
+ if (checksh.sh != dummysh) {
+ // If it is not encroached, test it.
+ if (shell2badface(checksh) == NULL) {
+ checksub4encroach(&checksh, testpt, true);
+ }
+ }
+ }
+ adjustedgering(starttet, CCW);
+ // Check the other three sides of this tet.
+ for (j = 0; j < 3; j++) {
+ fnext(starttet, neightet);
+ symself(neightet);
+ if ((neightet.tet == dummytet) || !infected(neightet)) {
+ fnext(starttet, neightet);
+ // Test if this face is encroached.
+ tspivot(neightet, checksh);
+ if (checksh.sh != dummysh) {
+ // If it is not encroached, test it.
+ if (shell2badface(checksh) == NULL) {
+ checksub4encroach(&checksh, testpt, true);
+ }
+ }
+ }
+ enextself(starttet);
+ }
+ }
+ // Uninfect all tetrahedra in the list.
+ for (i = 0; i < cavtetlist->len(); i++) {
+ starttet = * (triface *)(* cavtetlist)[i];
+ assert(infected(starttet));
+ uninfect(starttet);
+ }
+ } else {
+ // Check the entire list of subfaces.
+ subfaces->traversalinit();
+ checksh.sh = shellfacetraverse(subfaces);
+ while (checksh.sh != (shellface *) NULL) {
+ // If it is not encroached, test it.
+ if (shell2badface(checksh) == NULL) {
+ checksub4encroach(&checksh, testpt, true);
+ }
+ checksh.sh = shellfacetraverse(subfaces);
+ }
+ }
+
+ return (badsubfaces->items > oldencnum);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallencsubsfseg() Find all bad-qual or enc subfaces at a segment. //
+// //
+// This routine is called in repairencsegs() directly after a seg is split. //
+// 'testseg' is the one of the two resulting subsegments. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallencsubsfseg(face* testseg)
+{
+ face startsh, spinsh, checksh;
+ face splitseg, checkseg;
+
+ splitseg = *testseg;
+ // Check the subfaces link of splitseg to see if they're encroached.
+ spivot(splitseg, startsh);
+ spinsh = startsh;
+ do {
+ findedge(&spinsh, sorg(splitseg), sdest(splitseg));
+ // The next two lines are only for checking.
+ sspivot(spinsh, checkseg);
+ assert(checkseg.sh == splitseg.sh);
+ checksh = spinsh;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true);
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true);
+ }
+ // The above operation may change the edge.
+ findedge(&spinsh, sorg(splitseg), sdest(splitseg));
+ spivotself(spinsh);
+ } while (spinsh.sh != startsh.sh);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallbadsegs() Find all bad-quality segments and save them in list. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallbadsegs()
+{
+ face checkseg;
+
+ subsegs->traversalinit();
+ checkseg.sh = shellfacetraverse(subsegs);
+ while (checkseg.sh != (shellface *) NULL) {
+ if (varconstraint && (areabound(checkseg) > 0.0)) {
+ checkseg4badqual(&checkseg, true);
+ }
+ checkseg.sh = shellfacetraverse(subsegs);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallbadsubs() Find all bad-quality subfaces and save them in list. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallbadsubs()
+{
+ face checksh;
+
+ subfaces->traversalinit();
+ checksh.sh = shellfacetraverse(subfaces);
+ while (checksh.sh != (shellface *) NULL) {
+ checksub4badqual(&checksh, true);
+ checksh.sh = shellfacetraverse(subfaces);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallbadtetrahedrons() Queue all the bad-quality tetrahedra in the mesh.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallbadtetrahedrons()
+{
+ triface tetloop;
+
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ checktet4badqual(&tetloop, true);
+ tetloop.tet = tetrahedrontraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tallslivers() Queue all the slivers in the mesh. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::tallslivers()
+{
+ triface tetloop;
+
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ checktet4sliver(&tetloop, true);
+ tetloop.tet = tetrahedrontraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// getsplitpoint1() Get a suitable point for splitting a segment. //
+// //
+// 'splitseg' is going to be split. This routine finds a suitable point in //
+// it. The rules of finding point are similar to that of getsplitpoint(). //
+// If 'encpt != NULL', it encroaches 'splitseg'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::getsplitpoint1(face* splitseg, REAL* splitpt, point encpt)
+{
+ point ei, ej, ek;
+ point farorg, fardest;
+ REAL dij, dip, djp;
+ REAL dvj, dvp, div;
+ REAL dki, dkj, dkp;
+ REAL split;
+ bool acuteorg, acutedest;
+ int i;
+
+ ei = sorg(*splitseg);
+ ej = sdest(*splitseg);
+ if (encpt == (point) NULL) {
+ // No existing point encroaches the seg. Split it at the middle.
+ for (i = 0; i < 3; i++) splitpt[i] = ei[i] + 0.5 * (ej[i] - ei[i]);
+ return;
+ }
+
+ acuteorg = (pointtype(ei) == ACUTEVERTEX);
+ acutedest = (pointtype(ej) == ACUTEVERTEX);
+
+ if (acuteorg && acutedest) {
+ // Use rule 1.
+ dij = distance(ei, ej);
+ dip = distance(ei, encpt);
+ djp = distance(ej, encpt);
+ if (dip < 0.5 * dij) {
+ split = dip / dij;
+ } else if (djp < 0.5 * dij) {
+ split = (dij - djp) / dij;
+ } else {
+ split = 0.5;
+ }
+ for (i = 0; i < 3; i++) splitpt[i] = ei[i] + split * (ej[i] - ei[i]);
+ return;
+ }
+ if (acuteorg || acutedest) {
+ if (!acuteorg) {
+ // eorg is not acute, but edest is. Exchange eorg, edest.
+ ei = ej;
+ ej = sorg(*splitseg);
+ }
+ // Now, eorg must be acute.
+ // Try to split it by rule-2.
+ dij = distance(ei, ej);
+ dip = distance(ei, encpt);
+ split = dip / dij;
+ for (i = 0; i < 3; i++) splitpt[i] = ei[i] + split * (ej[i] - ei[i]);
+ dvj = dij - dip;
+ dvp = distance(splitpt, encpt);
+ if (dvj < dvp) {
+ // v is rejected, use rule-3.
+ split = 0.5 * dip / dij;
+ for (i = 0; i < 3; i++) splitpt[i] = ei[i] + split * (ej[i] - ei[i]);
+ }
+ return;
+ }
+
+ // Both ei and ej are nonacute.
+ farorg = getsegmentorigin(splitseg);
+ acuteorg = (pointtype(farorg) == ACUTEVERTEX);
+ sesymself(*splitseg);
+ fardest = getsegmentorigin(splitseg);
+ acutedest = (pointtype(fardest) == ACUTEVERTEX);
+ sesymself(*splitseg);
+
+ if (acuteorg || acutedest) {
+ if (acuteorg && acutedest) {
+ // Always use the vertex having smaller index.
+ if (pointmark(farorg) < pointmark(fardest)) {
+ acutedest = false;
+ } else {
+ acuteorg = false;
+ }
+ }
+ if (!acuteorg) {
+ // eorg is not acute, but edest is.
+ assert(acutedest);
+ // Exchange eorg, edest.
+ ei = ej;
+ ej = sorg(*splitseg);
+ ek = fardest;
+ } else {
+ ek = farorg;
+ }
+ // Try use rule-2.
+ dki = distance(ek, ei);
+ dkj = distance(ek, ej);
+ dkp = distance(ek, encpt);
+ split = dkp / dkj;
+ for (i = 0; i < 3; i++) splitpt[i] = ek[i] + split * (ej[i] - ek[i]);
+ // v may too close to ei or ej. If any of these happens, reject v.
+ dvp = distance(splitpt, encpt);
+ div = distance(ei, splitpt);
+ dvj = distance(splitpt, ej);
+ if ((div < dvp) || (dvj < dvp)) {
+ // Reject v. Use the middle point of ei and ej.
+ for (i = 0; i < 3; i++) splitpt[i] = ei[i] + 0.5 * (ej[i] - ei[i]);
+ }
+ } else {
+ // No far acute points. Use rule 1.
+ dij = distance(ei, ej);
+ dip = distance(ei, encpt);
+ djp = distance(ej, encpt);
+ if (dip < 0.5 * dij) {
+ split = dip / dij;
+ } else if (djp < 0.5 * dij) {
+ split = (dij - djp) / dij;
+ } else {
+ split = 0.5;
+ }
+ for (i = 0; i < 3; i++) splitpt[i] = ei[i] + split * (ej[i] - ei[i]);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// repairencsegs() Repair all the encroached segments. //
+// //
+// Encroached segments are in 'badsubsegs'. Each queued segment is repaired //
+// by inserting a point somewhere in it. Newly inserted points may encroach //
+// upon other segments, these are also repaired. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::repairencsegs(queue* flipqueue)
+{
+ badface *encloop;
+ triface starttet;
+ face splitseg, symsplitseg;
+ point eorg, edest, encpt;
+ point newpoint, sympoint;
+ enum locateresult symloc;
+ bool chkencsubs, chkbadqual;
+ int i, j;
+
+ if (b->verbose > 1) {
+ printf(" Splitting encroached subsegments.\n");
+ }
+
+ // Note that steinerleft == -1 if an unlimited number of Steiner points
+ // is allowed. Loop until 'badsubsegs' is empty.
+ while ((badsubsegs->items > 0) && (steinerleft != 0)) {
+ badsubsegs->traversalinit();
+ encloop = badfacetraverse(badsubsegs);
+ while ((encloop != (badface *) NULL) && (steinerleft != 0)) {
+ splitseg = encloop->ss;
+ // Every splitseg has a pointer to encloop, now clear it.
+ assert(shell2badface(splitseg) == encloop);
+ setshell2badface(splitseg, NULL);
+ eorg = sorg(splitseg);
+ edest = sdest(splitseg);
+ if ((eorg == encloop->forg) && (edest == encloop->fdest)) {
+ if (b->verbose > 1) {
+ printf(" Get seg (%d, %d) ", pointmark(eorg), pointmark(edest));
+ printf("enc by %d.\n", encloop->foppo != (point) NULL ?
+ pointmark(encloop->foppo) : 0);
+ }
+ // Split the seg if (1) it is encroached by an existing vertex, or
+ // (2) it is permitted to be split.
+ if (checkseg4splitting(&splitseg, &encpt)) {
+ // Create the new point.
+ makepoint(&newpoint);
+ // Decide the position to split the segment.
+ getsplitpoint1(&splitseg, newpoint, encpt);
+ // Set the parent point into the newpoint.
+ setpoint2ppt(newpoint, encpt);
+ // Set the type of the newpoint.
+ setpointtype(newpoint, FREESEGVERTEX);
+ // Set splitseg into the newpoint.
+ // setpoint2sh(newpoint, sencode(splitseg));
+ // Has subface confoming started?
+ chkencsubs = badsubfaces != (memorypool *) NULL;
+ // Has quality mesh started?
+ chkbadqual = badtetrahedrons != (memorypool *) NULL;
+
+ // Is there periodic boundary condition?
+ if (checkpbcs) {
+ // Yes! Insert points on other segments of incident pbcgroups.
+ i = shellmark(splitseg) - 1;
+ for (j = idx2segpglist[i]; j < idx2segpglist[i + 1]; j++) {
+ makepoint(&sympoint);
+ symloc = getsegpbcsympoint(newpoint, &splitseg, sympoint,
+ &symsplitseg, segpglist[j]);
+ assert(symloc != OUTSIDE);
+ if (symloc == ONEDGE) {
+ assert(symsplitseg.sh != dummysh);
+ setpointtype(sympoint, FREESEGVERTEX);
+ // setpoint2sh(sympoint, sencode(symsplitseg));
+ // Insert sympoint into the mesh.
+ symsplitseg.shver = 0;
+ sstpivot(&symsplitseg, &starttet);
+ splittetedge(sympoint, &starttet, flipqueue);
+ if (steinerleft > 0) steinerleft--;
+ // Check the two new subsegs to see if they're encroached.
+ // Note, symsplitseg may have already been queued.
+ if (!shell2badface(symsplitseg)) {
+ if (varconstraint && (areabound(symsplitseg) > 0.0)) {
+ checkseg4badqual(&symsplitseg, true);
+ }
+ }
+ if (!shell2badface(symsplitseg)) {
+ checkseg4encroach(&symsplitseg, NULL, NULL, true);
+ }
+ if (chkencsubs) {
+ // Find encroaching subfaces around s.
+ tallencsubsfseg(&symsplitseg);
+ }
+ senextself(symsplitseg);
+ spivotself(symsplitseg);
+ assert(symsplitseg.sh != (shellface *) NULL);
+ symsplitseg.shver = 0;
+ // symsplitseg is a new segment and has not been queued.
+ assert(shell2badface(symsplitseg) == (badface *) NULL);
+ if (varconstraint && (areabound(symsplitseg) > 0.0)) {
+ checkseg4badqual(&symsplitseg, true);
+ }
+ if (!shell2badface(symsplitseg)) {
+ checkseg4encroach(&symsplitseg, NULL, NULL, true);
+ }
+ if (chkencsubs) {
+ // Find encroaching subfaces around s.
+ tallencsubsfseg(&symsplitseg);
+ }
+ // Recover Delaunay property by flipping.
+ flip(flipqueue, NULL, true, chkencsubs, chkbadqual);
+ } else if (symloc == ONVERTEX) {
+ // The sympoint already exists. It is possible when two
+ // pbc groups are exactly the same. Omit this point.
+ pointdealloc(sympoint);
+ }
+ }
+ }
+
+ // Insert new point into the mesh. It should be always success.
+ splitseg.shver = 0;
+ sstpivot(&splitseg, &starttet);
+ splittetedge(newpoint, &starttet, flipqueue);
+ if (steinerleft > 0) steinerleft--;
+ // Check the two new subsegments to see if they're encroached.
+ // Note, splitseg may have already been queued.
+ if (!shell2badface(splitseg)) {
+ if (varconstraint && (areabound(splitseg) > 0.0)) {
+ checkseg4badqual(&splitseg, true);
+ }
+ }
+ if (!shell2badface(splitseg)) {
+ checkseg4encroach(&splitseg, NULL, NULL, true);
+ }
+ if (chkencsubs) {
+ // Find encroaching subfaces around s.
+ tallencsubsfseg(&splitseg);
+ }
+ senextself(splitseg);
+ spivotself(splitseg);
+ assert(splitseg.sh != (shellface *) NULL);
+ splitseg.shver = 0;
+ // splitseg is a new segment and has not been queued.
+ assert(shell2badface(splitseg) == (badface *) NULL);
+ if (varconstraint && (areabound(splitseg) > 0.0)) {
+ checkseg4badqual(&splitseg, true);
+ }
+ if (!shell2badface(splitseg)) {
+ checkseg4encroach(&splitseg, NULL, NULL, true);
+ }
+ if (chkencsubs) {
+ // Find encroaching subfaces around s.
+ tallencsubsfseg(&splitseg);
+ }
+ // Recover Delaunay property by flipping. Existing segments which
+ // are encroached by newpoint will be discovered and queued.
+ flip(flipqueue, NULL, true, chkencsubs, chkbadqual);
+
+ // Queuing bad-quality tetrahedra if need.
+ if (chkbadqual) {
+ doqualchecktetlist();
+ }
+ }
+ } else {
+ // Splitseg has been split. Check it for encroachment.
+ if (varconstraint && (areabound(splitseg) > 0.0)) {
+ checkseg4badqual(&splitseg, true);
+ }
+ if (!shell2badface(splitseg)) {
+ checkseg4encroach(&splitseg, NULL, NULL, true);
+ }
+ }
+
+ // Remove this entry from list.
+ badfacedealloc(badsubsegs, encloop);
+ // Get the next encroached segments.
+ encloop = badfacetraverse(badsubsegs);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// repairencsubs() Repair all the encroached subfaces. //
+// //
+// Encroached subfaces are in pool 'badsubfaces'. Each encroached subface is //
+// repaired by inserting a point near its circumcenter. However, If the new //
+// point encroaches upon one or more segments, it is not inserted. Instead //
+// the encroached segments are split. Newly added points may encroach upon //
+// other subfaces, these are also repaired. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::repairencsubs(list* cavtetlist, queue* flipqueue)
+{
+ badface *encloop;
+ triface starttet, symstarttet;
+ face splitsub, symsplitsub, neisplitsub;
+ face checksh, checkseg;
+ point newpoint, sympoint;
+ point checkpt, pa, pb;
+ enum locateresult loc, symloc;
+ REAL epspp, dist;
+ bool reject, chkbadqual;
+ int quenumber;
+ int epscount;
+ int i;
+
+ if (b->verbose > 1) {
+ printf(" Splitting encroached subfaces.\n");
+ }
+
+ // Note that steinerleft == -1 if an unlimited number of Steiner points
+ // is allowed. Loop until the list 'badsubfaces' is empty.
+ while ((badsubfaces->items > 0) && (steinerleft != 0)) {
+ // Look for a nonempty queue.
+ encloop = (badface *) NULL;
+ for (quenumber = 1; quenumber >= 0; quenumber--) {
+ encloop = subquefront[quenumber];
+ if (encloop != (badface *) NULL) {
+ // Remove the badface from the queue.
+ subquefront[quenumber] = encloop->nextitem;
+ // Maintain a pointer to the NULL pointer at the end of the queue.
+ if (subquefront[quenumber] == (badface *) NULL) {
+ subquetail[quenumber] = &subquefront[quenumber];
+ }
+ break;
+ }
+ }
+ assert(encloop != (badface *) NULL);
+ // Clear the pointer saved in encloop->ss.
+ splitsub = encloop->ss;
+ setshell2badface(splitsub, NULL);
+ // The subface may be not the same one when it was determined to be
+ // encroached. If its adjacent encroached subface was split, the
+ // consequent flips may change it into another subface.
+ if ((sorg(splitsub) == encloop->forg) &&
+ (sdest(splitsub) == encloop->fdest) &&
+ (sapex(splitsub) == encloop->fapex)) {
+ if (b->verbose > 1) {
+ printf(" Dequeuing ensub (%d, %d, %d) [%d].\n",
+ pointmark(encloop->forg), pointmark(encloop->fdest),
+ pointmark(encloop->fapex), quenumber);
+ }
+ if (checksub4splitting(&splitsub, (quenumber == 1))) {
+ // We can split this subface.
+ makepoint(&newpoint);
+ // If it is a bad quality face, calculate its circumcenter.
+ if (quenumber == 1) {
+ circumsphere(encloop->forg, encloop->fdest, encloop->fapex, NULL,
+ encloop->cent, NULL);
+ }
+ // Set the coordinates of newpoint.
+ for (i = 0; i < 3; i++) newpoint[i] = encloop->cent[i];
+ // Set the type of the newpoint.
+ setpointtype(newpoint, FREESUBVERTEX);
+
+ // Locate the newpoint in facet (resulting in splitsub).
+ loc = locatesub(newpoint, &splitsub, 1);
+ stpivot(splitsub, starttet);
+ if (starttet.tet == dummytet) {
+ sesymself(splitsub);
+ stpivot(splitsub, starttet);
+ }
+ assert(starttet.tet != dummytet);
+ // Look if the newpoint encroaches upon any segment.
+ cavtetlist->append(&starttet);
+ collectcavtets(newpoint, cavtetlist);
+ assert(cavtetlist->len() > 0);
+ reject = tallencsegs(newpoint, cavtetlist);
+ // Clear the list for the next use.
+ cavtetlist->clear();
+ if (!reject) {
+ // Remove the encroached subface by inserting the newpoint.
+ if (loc != ONVERTEX) {
+ // Adjust the location of newpoint wrt. starttet.
+ epspp = b->epsilon;
+ epscount = 0;
+ while (epscount < 32) {
+ loc = adjustlocate(newpoint, &starttet, ONFACE, epspp);
+ if (loc == ONVERTEX) {
+ checkpt = org(starttet);
+ dist = distance(checkpt, newpoint);
+ if ((dist / longest) > b->epsilon) {
+ epspp *= 1.0e-1;
+ epscount++;
+ continue;
+ }
+ }
+ break;
+ }
+ }
+ pa = org(starttet);
+ pb = dest(starttet);
+ findedge(&splitsub, pa, pb);
+
+ // Has quality mesh started?
+ chkbadqual = badtetrahedrons != (memorypool *) NULL;
+
+ if (checkpbcs) {
+ if (shellpbcgroup(splitsub) >= 0) {
+ makepoint(&sympoint);
+ symloc = getsubpbcsympoint(newpoint, &splitsub, sympoint,
+ &symsplitsub);
+ assert(symloc != ONVERTEX);
+ setpoint2pbcpt(newpoint, sympoint);
+ setpoint2pbcpt(sympoint, newpoint);
+ // Set the type of sympoint.
+ setpointtype(sympoint, FREESUBVERTEX);
+ stpivot(symsplitsub, symstarttet);
+ if (symstarttet.tet == dummytet) {
+ sesymself(symsplitsub);
+ stpivot(symsplitsub, symstarttet);
+ }
+ assert(symstarttet.tet != dummytet);
+ // Adjust symstarttet be the same edge as symsplitsub.
+ pa = sorg(symsplitsub);
+ pb = sdest(symsplitsub);
+ findedge(&symstarttet, pa, pb);
+ // 'symsplitsub' is face abc. ab is the current edge.
+ if (symloc == ONFACE) {
+ // Split the face abc into three faces abv, bcv, cav.
+ splittetface(sympoint, &symstarttet, flipqueue);
+ // Adjust symsplitsub be abv.
+ findedge(&symsplitsub, pa, pb);
+ assert(sapex(symsplitsub) == sympoint);
+ // Check the three new subfaces to see if they're encroached.
+ // symsplitsub may be queued (it exists before split).
+ checksh = symsplitsub;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true); // abv
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // abv
+ }
+ senext(symsplitsub, checksh);
+ spivotself(checksh);
+ // It is a new created face and should not be infected.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // bcv
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // bcv
+ }
+ senext2(symsplitsub, checksh);
+ spivotself(checksh);
+ // It is a new created face and should not be infected.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // cav
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // cav
+ }
+ } else if (symloc == ONEDGE) {
+ // Let the adjacent subface be bad. ab is the spliting edge.
+ // Split 2 faces: abc, bad into 4: avc, vbc, avd, vbd.
+ sspivot(symsplitsub, checkseg);
+ assert(checkseg.sh == dummysh);
+ // Remember the neighbor subface abd (going to be split too).
+ spivot(symsplitsub, neisplitsub);
+ findedge(&neisplitsub, pa, pb);
+ // Split 2 faces: abc, abd into 4: avc, vbc, avd, vbd.
+ splittetedge(sympoint, &symstarttet, flipqueue);
+ // Adjust symsplitsub be avc, neisplitsub be avd.
+ findedge(&symsplitsub, pa, sympoint);
+ findedge(&neisplitsub, pa, sympoint);
+ // Check the four new subfaces to see if they're encroached.
+ // splitsub may be infected (it exists before the split).
+ checksh = symsplitsub;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true); // avc
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // avc
+ }
+ // Get vbc.
+ senext(symsplitsub, checksh);
+ spivotself(checksh);
+ // vbc is newly created.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // vbc
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // vbc
+ }
+ // neisplitsub may be infected (exists before the split).
+ checksh = neisplitsub;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true); // avd
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // avd
+ }
+ // Get vbd.
+ senext(neisplitsub, checksh);
+ spivotself(checksh);
+ // vbd is newly created.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // vbd
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // vbd
+ }
+ } else {
+ // Delete the sympoint.
+ pointdealloc(sympoint);
+ }
+ if ((symloc == ONFACE) || (symloc == ONEDGE)) {
+ if (steinerleft > 0) steinerleft--;
+ // Recover Delaunay property by flipping.
+ flip(flipqueue, NULL, false, true, chkbadqual);
+ // There should be no encroached segments.
+ // assert(badsubsegs->items == 0);
+ // Queuing bad-quality tetrahedra if need.
+ if (chkbadqual) {
+ doqualchecktetlist();
+ }
+ }
+ }
+ }
+
+ stpivot(splitsub, starttet);
+ if (starttet.tet == dummytet) {
+ sesymself(splitsub);
+ stpivot(splitsub, starttet);
+ }
+ assert(starttet.tet != dummytet);
+ // Adjust starttet be the same edge as splitsub.
+ pa = sorg(splitsub);
+ pb = sdest(splitsub);
+ findedge(&starttet, pa, pb);
+ // 'splitsub' is face abc. ab is the current edge.
+ if (loc == ONFACE) {
+ // Split the face abc into three faces abv, bcv, cav.
+ splittetface(newpoint, &starttet, flipqueue);
+ // Adjust splitsub be abv.
+ findedge(&splitsub, pa, pb);
+ assert(sapex(splitsub) == newpoint);
+ // Check the three new subfaces to see if they're encroached.
+ // splitsub may be queued (it exists before split).
+ checksh = splitsub;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true); // abv
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // abv
+ }
+ senext(splitsub, checksh);
+ spivotself(checksh);
+ // It is a new created face and should not be infected.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // bcv
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // bcv
+ }
+ senext2(splitsub, checksh);
+ spivotself(checksh);
+ // It is a new created face and should not be infected.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // cav
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // cav
+ }
+ } else if (loc == ONEDGE) {
+ // Let the adjacent subface be bad. ab is the spliting edge.
+ // Split 2 faces: abc, bad into 4: avc, vbc, avd, vbd.
+ sspivot(splitsub, checkseg);
+ assert(checkseg.sh == dummysh);
+ // Remember the neighbor subface abd (going to be split too).
+ spivot(splitsub, neisplitsub);
+ findedge(&neisplitsub, pa, pb);
+ // Split two faces abc, abd into four faces avc, vbc, avd, vbd.
+ splittetedge(newpoint, &starttet, flipqueue);
+ // Adjust splitsub be avc, neisplitsub be avd.
+ findedge(&splitsub, pa, newpoint);
+ findedge(&neisplitsub, pa, newpoint);
+ // Check the four new subfaces to see if they're encroached.
+ // splitsub may be infected (it exists before the split).
+ checksh = splitsub;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true); // avc
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // avc
+ }
+ // Get vbc.
+ senext(splitsub, checksh);
+ spivotself(checksh);
+ // vbc is newly created.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // vbc
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // vbc
+ }
+ // neisplitsub may be infected (it exists before the split).
+ checksh = neisplitsub;
+ if (!shell2badface(checksh)) {
+ checksub4badqual(&checksh, true); // avd
+ }
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // avd
+ }
+ // Get vbd.
+ senext(neisplitsub, checksh);
+ spivotself(checksh);
+ // vbd is newly created.
+ assert(checksh.sh != dummysh && !shell2badface(checksh));
+ checksub4badqual(&checksh, true); // vbd
+ if (!shell2badface(checksh)) {
+ checksub4encroach(&checksh, NULL, true); // vbd
+ }
+ } else {
+ /* It's a BUG.
+ printf("Internal error in splitencsub(): Point %d locates %s.\n",
+ pointmark(newpoint), loc == ONVERTEX ? "on vertex" : "outside");
+ internalerror();
+ */
+ // Delete the newpoint.
+ pointdealloc(newpoint);
+ }
+ if ((loc == ONFACE) || (loc == ONEDGE)) {
+ if (steinerleft > 0) steinerleft--;
+ // Recover Delaunay property by flipping. Subfaces which are
+ // encroached by the new point will be discovered.
+ flip(flipqueue, NULL, false, true, chkbadqual);
+ // There should be no encroached segments.
+ // assert(badsubsegs->items == 0);
+ // Queuing bad-quality tetrahedra if need.
+ if (chkbadqual) {
+ doqualchecktetlist();
+ }
+ }
+ } else {
+ // newpoint encroaches upon some segments. Rejected.
+ // Delete the newpoint.
+ pointdealloc(newpoint);
+ }
+ // Repair all the encroached segments.
+ if (badsubsegs->items > 0) {
+ repairencsegs(flipqueue);
+ }
+ }
+ } else {
+ // enq = false! This subface has been changed, check it again.
+ checksub4badqual(&splitsub, true);
+ if (!shell2badface(splitsub)) {
+ checksub4encroach(&splitsub, NULL, true);
+ }
+ }
+ // Remove this entry from list.
+ badfacedealloc(badsubfaces, encloop);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// repairbadtets() Repair all bad-quality tetrahedra. //
+// //
+// At beginning, all bad-quality tetrahedra are stored in 'badtetrahedrons'. //
+// Each bad tetrahedron is repaired by inserting a point at or near its cir- //
+// cumcenter. However, if this point encroaches any subsegment or subface, //
+// it is not inserted. Instead the encroached segment and subface are split. //
+// Newly inserted points may create other bad-quality tetrahedra, these are //
+// also repaired. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::repairbadtets(list* cavtetlist, queue* flipqueue)
+{
+ badface *badtet;
+ triface starttet;
+ point newpoint;
+ enum insertsiteresult success;
+ enum locateresult loc;
+ bool reject;
+ int i;
+
+ // Loop until pool 'badtetrahedrons' is empty. Note that steinerleft == -1
+ // if an unlimited number of Steiner points is allowed.
+ while ((badtetrahedrons->items > 0) && (steinerleft != 0)) {
+ badtet = dequeuebadtet();
+ assert (badtet != (badface *) NULL);
+ // Make sure that 'badtet->tet' is still the same one when it was tested.
+ // Subsequent transformations may have made it a different tet.
+ if (!isdead(&badtet->tt) && org(badtet->tt) == badtet->forg &&
+ dest(badtet->tt) == badtet->fdest &&
+ apex(badtet->tt) == badtet->fapex &&
+ oppo(badtet->tt) == badtet->foppo) {
+ // Create a newpoint at the circumcenter of this tetrahedron.
+ makepoint(&newpoint);
+ for (i = 0; i < 3; i++) newpoint[i] = badtet->cent[i];
+ // Set it's type be FREEVOLVERTEX.
+ setpointtype(newpoint, FREEVOLVERTEX);
+
+ // Locate newpoint in mesh.
+ starttet = badtet->tt; // Used for the input of preciselocate().
+ loc = preciselocate(newpoint, &starttet);
+ // Look if the newpoint encroaches upon any segment or subface.
+ cavtetlist->append(&starttet);
+ collectcavtets(newpoint, cavtetlist);
+ assert(cavtetlist->len() > 0);
+ reject = tallencsubs(newpoint, cavtetlist);
+ // Clear the list for the next use.
+ cavtetlist->clear();
+
+ if (!reject && (loc != OUTSIDE)) {
+ // Insert the point, it should be always success.
+ starttet = badtet->tt;
+ success = insertsite(newpoint, &starttet, true, flipqueue);
+ if (success != DUPLICATEPOINT) {
+ if (steinerleft > 0) steinerleft--;
+ // Recover Delaunay property by flipping.
+ flip(flipqueue, NULL, false, false, true);
+ // Queuing bad-quality tetrahedra if need.
+ doqualchecktetlist();
+ } else {
+ // !!! It's a bug!!!
+ pointdealloc(newpoint);
+ }
+ } else {
+ // newpoint encroaches upon some subfaces. Rejected.
+ pointdealloc(newpoint);
+ if (badsubfaces->items > 0) {
+ // Repair all the encroached subfaces.
+ repairencsubs(cavtetlist, flipqueue);
+ }
+ }
+ }
+ // Remove the bad-quality tetrahedron from the pool.
+ badfacedealloc(badtetrahedrons, badtet);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// repairslivers() Remove slivers from the mesh. //
+// //
+// Slivers are found and stored in 'badtetrahedrons'. Each sliver is removed //
+// by either local transformation operator or inserting a point at or near //
+// its circumcenter. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::repairslivers(list* cavtetlist, queue* flipqueue)
+{
+ badface *badtet;
+ triface starttet;
+ point newpoint;
+ enum insertsiteresult success;
+ enum locateresult loc;
+ bool reject;
+ int total, counter;
+
+ total = 0;
+ while (badtetrahedrons->items > 0l) {
+ counter = 0;
+ // Loop in pool 'badtetrahedrons'.
+ badtetrahedrons->traversalinit();
+ badtet = badfacetraverse(badtetrahedrons);
+ while (badtet != (badface *) NULL) {
+ if (!isdead(&badtet->tt) && (org(badtet->tt) == badtet->forg) &&
+ (dest(badtet->tt) == badtet->fdest) &&
+ (apex(badtet->tt) == badtet->fapex) &&
+ (oppo(badtet->tt) == badtet->foppo)) {
+ if (finddiagonal(&(badtet->tt))) {
+ if (removekite(&(badtet->tt), NULL)) {
+ // Remove the sliver from the pool.
+ badfacedealloc(badtetrahedrons, badtet);
+ counter++;
+ }
+ }
+ }
+ badtet = badfacetraverse(badtetrahedrons);
+ }
+ // Are there any sliver be removed?
+ if (counter == 0) break;
+ // Accumulate the number of removed slivers.
+ total += counter;
+ if (badtetrahedrons->items > 0l) {
+ // Some slivers may remain in the mesh.
+ badtetrahedrons->restart();
+ tallslivers();
+ }
+ }
+
+ if (badtetrahedrons->items > 0l) {
+ // Some slivers survived. Try to split them.
+ counter = 0;
+ badtetrahedrons->traversalinit();
+ badtet = badfacetraverse(badtetrahedrons);
+ while (badtet != (badface *) NULL) {
+ if (!isdead(&badtet->tt) && (org(badtet->tt) == badtet->forg) &&
+ (dest(badtet->tt) == badtet->fdest) &&
+ (apex(badtet->tt) == badtet->fapex) &&
+ (oppo(badtet->tt) == badtet->foppo)) {
+ // Create a newpoint at the circumcenter of this sliver.
+ makepoint(&newpoint);
+ circumsphere(badtet->forg, badtet->fdest, badtet->fapex, badtet->foppo,
+ newpoint, NULL);
+ // Set it's type be FREEVOLVERTEX.
+ setpointtype(newpoint, FREEVOLVERTEX);
+ // Locate newpoint in mesh.
+ starttet = badtet->tt; // Used for the input of preciselocate().
+ loc = preciselocate(newpoint, &starttet);
+ // Look if the newpoint encroaches upon any segment or subface.
+ cavtetlist->append(&starttet);
+ collectcavtets(newpoint, cavtetlist);
+ assert(cavtetlist->len() > 0);
+ reject = tallencsubs(newpoint, cavtetlist);
+ // Clear the list for the next use.
+ cavtetlist->clear();
+ if (!reject && (loc != OUTSIDE)) {
+ // Insert the point, it should be always success.
+ starttet = badtet->tt;
+ success = insertsite(newpoint, &starttet, true, flipqueue);
+ if (success != DUPLICATEPOINT) {
+ if (steinerleft > 0) steinerleft--;
+ // Recover Delaunay property by flipping.
+ flip(flipqueue, NULL, false, false, false);
+ // Remove the sliver from the pool.
+ badfacedealloc(badtetrahedrons, badtet);
+ counter++;
+ } else {
+ // !!! It's a bug!!!
+ pointdealloc(newpoint);
+ }
+ } else {
+ // Rejected. Do not insert the point.
+ pointdealloc(newpoint);
+ // Clean the pool.
+ badsubfaces->restart();
+ }
+ } else {
+ // Sliver has been changed.
+ badfacedealloc(badtetrahedrons, badtet);
+ counter++;
+ }
+ badtet = badfacetraverse(badtetrahedrons);
+ }
+ // Accumulate the number of removed slivers.
+ total += counter;
+ }
+
+ if (b->verbose) {
+ printf(" %d slivers are removed.\n", total);
+ if (badtetrahedrons->items > 0l) {
+ printf(" %ld sliver(s) survived.\n", badtetrahedrons->items);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// enforcequality() Remove all the encroached subsegments, subfaces and //
+// bad tetrahedra from the tetrahedral mesh. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::enforcequality()
+{
+ queue *flipqueue;
+ list *cavtetlist;
+ long total, vertcount;
+ int i;
+
+ if (!b->quiet) {
+ printf("Adding Steiner points to enforce quality.\n");
+ }
+
+ total = 0l;
+ // Initialize working queues, lists.
+ flipqueue = new queue(sizeof(badface));
+ rpsarray = new REAL[points->items + 1];
+ cavtetlist = new list(sizeof(triface), NULL, 256);
+
+ if (b->refine) {
+ // Mark segment vertices (acute or not).
+ markacutevertices(89.0);
+ }
+ // Mark sharp subfaces (for termination).
+ marksharpsubfaces(89.0);
+ // Mark skinny subfaces (for reducing Steiner points).
+ markskinnysubfaces(19.0);
+ // Calculate the protecting spheres for all acute points.
+ initializerpsarray();
+
+ // Initialize the pool of encroached subsegments.
+ badsubsegs = new memorypool(sizeof(badface), SUBPERBLOCK, POINTER, 0);
+ if (varconstraint && in->segmentconstraintlist) {
+ // Test all segments to see if they're bad-quality.
+ tallbadsegs();
+ }
+ // Test all segments to see if they're encroached.
+ tallencsegs(NULL, NULL);
+ if (b->verbose && badsubsegs->items > 0) {
+ printf(" Splitting encroached subsegments.\n");
+ }
+ vertcount = points->items;
+ // Fix encroached segments without noting any enc subfaces.
+ repairencsegs(flipqueue);
+ if (b->verbose) {
+ printf(" %ld points are inserted.\n", points->items - vertcount);
+ }
+ total += points->items - vertcount;
+
+ // Initialize the pool of encroached subfaces.
+ badsubfaces = new memorypool(sizeof(badface), SUBPERBLOCK, POINTER, 0);
+ // Initialize the queues of badfaces.
+ for (i = 0; i < 2; i++) subquefront[i] = (badface *) NULL;
+ for (i = 0; i < 2; i++) subquetail[i] = &subquefront[i];
+ // Test all subfaces to see if they're bad-quality.
+ tallbadsubs();
+ // Test the rest of subfaces to see if they're encroached.
+ tallencsubs(NULL, NULL);
+ if (b->verbose && badsubfaces->items > 0) {
+ printf(" Splitting encroached subfaces.\n");
+ }
+ vertcount = points->items;
+ // Fix encroached subfaces without noting bad tetrahedra.
+ repairencsubs(cavtetlist, flipqueue);
+ // At this point, the mesh should be (conforming) Delaunay.
+ if (b->verbose) {
+ printf(" %ld points are inserted.\n", points->items - vertcount);
+ }
+ total += points->items - vertcount;
+
+ // Next, fix bad quality tetrahedra.
+ if ((b->minratio > 0.0) || b->varvolume || b->fixedvolume) {
+ // Initialize the pool of bad tetrahedra.
+ badtetrahedrons = new memorypool(sizeof(badface), ELEPERBLOCK, POINTER, 0);
+ // Initialize the list of bad tetrahedra.
+ qualchecktetlist = new list(sizeof(triface), NULL);
+ // Initialize the queues of bad tetrahedra.
+ for (i = 0; i < 64; i++) tetquefront[i] = (badface *) NULL;
+ for (i = 0; i < 64; i++) tetquetail[i] = &tetquefront[i];
+ // Test all tetrahedra to see if they're bad.
+ tallbadtetrahedrons();
+ if (b->verbose && badtetrahedrons->items > 0) {
+ printf(" Splitting bad tetrahedra.\n");
+ }
+ vertcount = points->items;
+ repairbadtets(cavtetlist, flipqueue);
+ // At this point, it should no bad quality tetrahedra.
+ if (b->verbose) {
+ printf(" %ld points are inserted.\n", points->items - vertcount);
+ }
+ total += points->items - vertcount;
+ assert(badtetrahedrons->items == 0l);
+ // Next, remove slivers from the mesh.
+ tallslivers();
+ if (b->verbose && badtetrahedrons->items > 0) {
+ printf(" Removing slivers.\n");
+ }
+ vertcount = points->items;
+ repairslivers(cavtetlist, flipqueue);
+ if (b->verbose) {
+ printf(" %ld points are inserted.\n", points->items - vertcount);
+ }
+ total += points->items - vertcount;
+ delete qualchecktetlist;
+ delete badtetrahedrons;
+ }
+
+ if (b->verbose) {
+ printf(" Total %ld points are inserted.\n", total);
+ }
+
+ delete cavtetlist;
+ delete flipqueue;
+ delete badsubfaces;
+ delete badsubsegs;
+ delete [] rpsarray;
+}
+
+//
+// End of Delaunay refinement routines
+//
+
+//
+// Begin of I/O rouitnes
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// transfernodes() Transfer nodes from 'io->pointlist' to 'this->points'. //
+// //
+// Initializing 'this->points'. Transferring all points from 'in->pointlist'//
+// into it. All points are indexed (start from in->firstnumber). Each point //
+// is initialized be UNUSEDVERTEX. The bounding box (xmin, xmax, ymin, ymax,//
+// zmin, zmax) and the diameter (longest) of the point set are calculated. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::transfernodes()
+{
+ point pointloop;
+ REAL x, y, z;
+ int coordindex;
+ int attribindex;
+ int i, j;
+
+ // Read the points.
+ coordindex = 0;
+ attribindex = 0;
+ for (i = 0; i < in->numberofpoints; i++) {
+ makepoint(&pointloop);
+ // Read the point coordinates.
+ x = pointloop[0] = in->pointlist[coordindex++];
+ y = pointloop[1] = in->pointlist[coordindex++];
+ z = pointloop[2] = in->pointlist[coordindex++];
+ // Read the point attributes.
+ for (j = 0; j < in->numberofpointattributes; j++) {
+ pointloop[3 + j] = in->pointattributelist[attribindex++];
+ }
+ // Determine the smallest and largests x, y and z coordinates.
+ if (i == 0) {
+ xmin = xmax = x;
+ ymin = ymax = y;
+ zmin = zmax = z;
+ } else {
+ xmin = (x < xmin) ? x : xmin;
+ xmax = (x > xmax) ? x : xmax;
+ ymin = (y < ymin) ? y : ymin;
+ ymax = (y > ymax) ? y : ymax;
+ zmin = (z < zmin) ? z : zmin;
+ zmax = (z > zmax) ? z : zmax;
+ }
+ }
+ // 'longest' is the largest possible edge length formed by input vertices.
+ // It is used as the measure to distinguish two identical points.
+ x = xmax - xmin;
+ y = ymax - ymin;
+ z = zmax - zmin;
+ longest = sqrt(x * x + y * y + z * z);
+ if (longest == 0.0) {
+ printf("Error: The point set is trivial.\n");
+ exit(1);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// jettisonnodes() Jettison unused or duplicated vertices. //
+// //
+// Unused points are those input points which are outside the mesh domain or //
+// have no connection (isolated) to the mesh. Duplicated points exist for //
+// example if the input PLC is read from a .stl mesh file (marked during the //
+// Delaunay tetrahedralization step. This routine remove these points from //
+// points list. All existing points are reindexed. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::jettisonnodes()
+{
+ point pointloop;
+ bool jetflag;
+ int idx;
+
+ if (!b->quiet) {
+ printf("Jettisoning redundants points.\n");
+ }
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ idx = in->firstnumber;
+ while (pointloop != (point) NULL) {
+ jetflag = (pointtype(pointloop) == DUPLICATEDVERTEX) ||
+ (pointtype(pointloop) == UNUSEDVERTEX);
+ if (jetflag) {
+ // It is a duplicated point, delete it.
+ pointdealloc(pointloop);
+ } else {
+ // Index it.
+ setpointmark(pointloop, idx);
+ idx++;
+ }
+ pointloop = pointtraverse();
+ }
+ dupverts = 0;
+ unuverts = 0;
+
+ // The following line ensures that dead items in the pool of nodes cannot
+ // be allocated for the new created nodes. This ensures that the input
+ // nodes will occur earlier in the output files, and have lower indices.
+ points->deaditemstack = (void *) NULL;
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// highorder() Create extra nodes for quadratic subparametric elements. //
+// //
+// 'highordertable' is an array (size = numberoftetrahedra * 6) for storing //
+// high-order nodes of each tetrahedron. This routine is used only when -o2 //
+// switch is used. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::highorder()
+{
+ triface tetloop, worktet;
+ triface spintet, adjtet;
+ point torg, tdest, tapex;
+ point *extralist, *adjextralist;
+ point newpoint;
+ int hitbdry, ptmark;
+ int i, j;
+
+ // The 'edgeindex' (from 0 to 5) is list as follows:
+ // 0 - (v0, v1), 1 - (v1, v2), 2 - (v2, v0)
+ // 3 - (v3, v0), 4 - (v3, v1), 5 - (v3, v2)
+ // Define an edgeindex map: (loc, ver)->edgeindex.
+ int edgeindexmap[4][6] = {0, 0, 1, 1, 2, 2,
+ 3, 3, 4, 4, 0, 0,
+ 4, 4, 5, 5, 1, 1,
+ 5, 5, 3, 3, 2, 2};
+
+ if (!b->quiet) {
+ printf("Adding vertices for second-order tetrahedra.\n");
+ }
+
+ // Initialize the 'highordertable'.
+ highordertable = new point[tetrahedrons->items * 6];
+ if (highordertable == (point *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+
+ // The following line ensures that dead items in the pool of nodes cannot
+ // be allocated for the extra nodes associated with high order elements.
+ // This ensures that the primary nodes (at the corners of elements) will
+ // occur earlier in the output files, and have lower indices, than the
+ // extra nodes.
+ points->deaditemstack = (void *) NULL;
+
+ // Assign an entry for each tetrahedron to find its extra nodes. At the
+ // mean while, initialize all extra nodes be NULL.
+ i = 0;
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ tetloop.tet[highorderindex] = (tetrahedron) &highordertable[i];
+ for (j = 0; j < 6; j++) {
+ highordertable[i + j] = (point) NULL;
+ }
+ i += 6;
+ tetloop.tet = tetrahedrontraverse();
+ }
+
+ // To create a unique node on each edge. Loop over all tetrahedra, and
+ // look at the six edges of each tetrahedron. If the extra node in
+ // the tetrahedron corresponding to this edge is NULL, create a node
+ // for this edge, at the same time, set the new node into the extra
+ // node lists of all other tetrahedra sharing this edge.
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ // Get the list of extra nodes.
+ extralist = (point *) tetloop.tet[highorderindex];
+ for (i = 0; i < 6; i++) {
+ if (extralist[i] == (point) NULL) {
+ // Operate on this edge.
+ worktet = tetloop;
+ worktet.loc = 0; worktet.ver = 0;
+ // Get the correct edge in 'worktet'.
+ switch(i) {
+ case 0: // (v0, v1)
+ break;
+ case 1: // (v1, v2)
+ enextself(worktet);
+ break;
+ case 2: // (v2, v0)
+ enext2self(worktet);
+ break;
+ case 3: // (v3, v0)
+ fnextself(worktet);
+ enext2self(worktet);
+ break;
+ case 4: // (v3, v1)
+ enextself(worktet);
+ fnextself(worktet);
+ enext2self(worktet);
+ break;
+ case 5: // (v3, v2)
+ enext2self(worktet);
+ fnextself(worktet);
+ enext2self(worktet);
+ }
+ // Create a new node on this edge.
+ torg = org(worktet);
+ tdest = dest(worktet);
+ // Create a new node in the middle of the edge.
+ newpoint = (point) points->alloc();
+ // Interpolate its attributes.
+ for (j = 0; j < 3 + in->numberofpointattributes; j++) {
+ newpoint[j] = 0.5 * (torg[j] + tdest[j]);
+ }
+ ptmark = (int) points->items - (in->firstnumber == 1 ? 0 : 1);
+ setpointmark(newpoint, ptmark);
+ // Add this node to its extra node list.
+ extralist[i] = newpoint;
+ // Set 'newpoint' into extra node lists of other tetrahedra
+ // sharing this edge.
+ tapex = apex(worktet);
+ spintet = worktet;
+ hitbdry = 0;
+ while (hitbdry < 2) {
+ if (fnextself(spintet)) {
+ // Get the extra node list of 'spintet'.
+ adjextralist = (point *) spintet.tet[highorderindex];
+ // Find the index of its extra node list.
+ j = edgeindexmap[spintet.loc][spintet.ver];
+ // Only set 'newpoint' into 'adjextralist' if it is a NULL.
+ // Because two faces can belong to the same tetrahedron.
+ if (adjextralist[j] == (point) NULL) {
+ adjextralist[j] = newpoint;
+ }
+ if (apex(spintet) == tapex) {
+ break;
+ }
+ } else {
+ hitbdry++;
+ if (hitbdry < 2) {
+ esym(worktet, spintet);
+ }
+ }
+ }
+ }
+ }
+ tetloop.tet = tetrahedrontraverse();
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outnodes() Output the points to a .node file or a tetgenio structure. //
+// //
+// Note: each point has already been numbered on input (the first index is //
+// 'in->firstnumber'). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outnodes(tetgenio* out)
+{
+ FILE *outfile;
+ char outnodefilename[FILENAMESIZE];
+ point pointloop;
+ int nextras, bmark, marker;
+ int coordindex, attribindex;
+ int pointnumber, index, i;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(outnodefilename, b->outfilename);
+ strcat(outnodefilename, ".node");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", outnodefilename);
+ } else {
+ printf("Writing nodes.\n");
+ }
+ }
+
+ nextras = in->numberofpointattributes;
+ bmark = !b->nobound && in->pointmarkerlist;
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(outnodefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", outnodefilename);
+ exit(1);
+ }
+ // Number of points, number of dimensions, number of point attributes,
+ // and number of boundary markers (zero or one).
+ fprintf(outfile, "%ld %d %d %d\n", points->items, 3, nextras, bmark);
+ } else {
+ // Allocate space for 'pointlist';
+ out->pointlist = new REAL[points->items * 3];
+ if (out->pointlist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ // Allocate space for 'pointattributelist' if necessary;
+ if (nextras > 0) {
+ out->pointattributelist = new REAL[points->items * nextras];
+ if (out->pointattributelist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ // Allocate space for 'pointmarkerlist' if necessary;
+ if (bmark) {
+ out->pointmarkerlist = new int[points->items];
+ if (out->pointmarkerlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ out->numberofpoints = points->items;
+ out->numberofpointattributes = nextras;
+ coordindex = 0;
+ attribindex = 0;
+ }
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ pointnumber = in->firstnumber;
+ index = 0;
+ while (pointloop != (point) NULL) {
+ if (bmark) {
+ // Determine the boundary marker.
+ if (index < in->numberofpoints) {
+ // Input point's marker is directly copied to output.
+ marker = in->pointmarkerlist[index];
+ if (marker == 0) {
+ // Change the marker if it is a boundary point.
+ marker = (pointtype(pointloop) != FREEVOLVERTEX) ? 1 : 0;
+ }
+ } else if (pointtype(pointloop) != FREEVOLVERTEX) {
+ // A boundary vertex has marker 1.
+ marker = 1;
+ } else {
+ // Free or internal point has a zero marker.
+ marker = 0;
+ }
+ }
+ if (out == (tetgenio *) NULL) {
+ // Point number, x, y and z coordinates.
+ fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
+ pointloop[0], pointloop[1], pointloop[2]);
+ for (i = 0; i < nextras; i++) {
+ // Write an attribute.
+ fprintf(outfile, " %.17g", pointloop[3 + i]);
+ }
+ if (bmark) {
+ // Write the boundary marker.
+ fprintf(outfile, " %d", marker);
+ }
+ fprintf(outfile, "\n");
+ } else {
+ // X, y, and z coordinates.
+ out->pointlist[coordindex++] = pointloop[0];
+ out->pointlist[coordindex++] = pointloop[1];
+ out->pointlist[coordindex++] = pointloop[2];
+ // Point attributes.
+ for (i = 0; i < nextras; i++) {
+ // Output an attribute.
+ out->pointattributelist[attribindex++] = pointloop[3 + i];
+ }
+ if (bmark) {
+ // Output the boundary marker.
+ out->pointmarkerlist[index] = marker;
+ }
+ }
+ pointloop = pointtraverse();
+ pointnumber++;
+ index++;
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outelements() Output the tetrahedra to an .ele file or a tetgenio //
+// structure. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outelements(tetgenio* out)
+{
+ FILE *outfile;
+ char outelefilename[FILENAMESIZE];
+ tetrahedron* tptr;
+ int *tlist;
+ REAL *talist;
+ int pointindex;
+ int attribindex;
+ point p1, p2, p3, p4;
+ point *extralist;
+ int elementnumber;
+ int eextras;
+ int i;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(outelefilename, b->outfilename);
+ strcat(outelefilename, ".ele");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", outelefilename);
+ } else {
+ printf("Writing elements.\n");
+ }
+ }
+
+ eextras = in->numberoftetrahedronattributes;
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(outelefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", outelefilename);
+ exit(1);
+ }
+ // Number of tetras, points per tetra, attributes per tetra.
+ fprintf(outfile, "%ld %d %d\n", tetrahedrons->items,
+ b->order == 1 ? 4 : 10, eextras);
+ } else {
+ // Allocate memory for output tetrahedra.
+ out->tetrahedronlist = new int[tetrahedrons->items *
+ (b->order == 1 ? 4 : 10)];
+ if (out->tetrahedronlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ // Allocate memory for output tetrahedron attributes if necessary.
+ if (eextras > 0) {
+ out->tetrahedronattributelist = new REAL[tetrahedrons->items * eextras];
+ if (out->tetrahedronattributelist == (REAL *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ out->numberoftetrahedra = tetrahedrons->items;
+ out->numberofcorners = b->order == 1 ? 4 : 10;
+ out->numberoftetrahedronattributes = eextras;
+ tlist = out->tetrahedronlist;
+ talist = out->tetrahedronattributelist;
+ pointindex = 0;
+ attribindex = 0;
+ }
+
+ tetrahedrons->traversalinit();
+ tptr = tetrahedrontraverse();
+ elementnumber = in->firstnumber;
+ while (tptr != (tetrahedron *) NULL) {
+ p1 = (point) tptr[4];
+ p2 = (point) tptr[5];
+ p3 = (point) tptr[6];
+ p4 = (point) tptr[7];
+ if (out == (tetgenio *) NULL) {
+ // Tetrahedron number, indices for four points.
+ fprintf(outfile, "%5d %5d %5d %5d %5d", elementnumber,
+ pointmark(p1), pointmark(p2), pointmark(p3), pointmark(p4));
+ if (b->order == 2) {
+ extralist = (point *) tptr[highorderindex];
+ // Tetrahedron number, indices for four points plus six extra points.
+ fprintf(outfile, " %5d %5d %5d %5d %5d %5d",
+ pointmark(extralist[0]), pointmark(extralist[1]),
+ pointmark(extralist[2]), pointmark(extralist[3]),
+ pointmark(extralist[4]), pointmark(extralist[5]));
+ }
+ for (i = 0; i < eextras; i++) {
+ fprintf(outfile, " %.17g", elemattribute(tptr, i));
+ }
+ fprintf(outfile, "\n");
+ } else {
+ tlist[pointindex++] = pointmark(p1);
+ tlist[pointindex++] = pointmark(p2);
+ tlist[pointindex++] = pointmark(p3);
+ tlist[pointindex++] = pointmark(p4);
+ if (b->order == 2) {
+ extralist = (point *) tptr[highorderindex];
+ tlist[pointindex++] = pointmark(extralist[0]);
+ tlist[pointindex++] = pointmark(extralist[1]);
+ tlist[pointindex++] = pointmark(extralist[2]);
+ tlist[pointindex++] = pointmark(extralist[3]);
+ tlist[pointindex++] = pointmark(extralist[4]);
+ tlist[pointindex++] = pointmark(extralist[5]);
+ }
+ for (i = 0; i < eextras; i++) {
+ talist[attribindex++] = elemattribute(tptr, i);
+ }
+ }
+ tptr = tetrahedrontraverse();
+ elementnumber++;
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outfaces() Output all faces to a .face file or a tetgenio structure. //
+// //
+// This routines outputs all triangular faces (including outer boundary //
+// faces and inner faces) of this mesh. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outfaces(tetgenio* out)
+{
+ FILE *outfile;
+ char facefilename[FILENAMESIZE];
+ int *elist;
+ int *emlist;
+ int index;
+ triface tface, tsymface;
+ face checkmark;
+ point torg, tdest, tapex;
+ long faces;
+ int bmark, faceid, marker;
+ int facenumber;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(facefilename, b->outfilename);
+ strcat(facefilename, ".face");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", facefilename);
+ } else {
+ printf("Writing faces.\n");
+ }
+ }
+
+ faces = (4l * tetrahedrons->items + hullsize) / 2l;
+ bmark = !b->nobound && in->facetmarkerlist;
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(facefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", facefilename);
+ exit(1);
+ }
+ fprintf(outfile, "%ld %d\n", faces, bmark);
+ } else {
+ // Allocate memory for 'trifacelist'.
+ out->trifacelist = new int[faces * 3];
+ if (out->trifacelist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ // Allocate memory for 'trifacemarkerlist' if necessary.
+ if (bmark) {
+ out->trifacemarkerlist = new int[faces];
+ if (out->trifacemarkerlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ out->numberoftrifaces = faces;
+ elist = out->trifacelist;
+ emlist = out->trifacemarkerlist;
+ index = 0;
+ }
+
+ tetrahedrons->traversalinit();
+ tface.tet = tetrahedrontraverse();
+ facenumber = in->firstnumber;
+ // To loop over the set of faces, loop over all tetrahedra, and look at
+ // the four faces of each one. If there isn't another tetrahedron
+ // adjacent to this face, operate on the face. If there is another
+ // adjacent tetrahedron, operate on the face only if the current
+ // tetrahedron has a smaller pointer than its neighbor. This way, each
+ // face is considered only once.
+ while (tface.tet != (tetrahedron *) NULL) {
+ for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
+ sym(tface, tsymface);
+ if ((tsymface.tet == dummytet) || (tface.tet < tsymface.tet)) {
+ torg = org(tface);
+ tdest = dest(tface);
+ tapex = apex(tface);
+ if (bmark) {
+ // Get the boundary marker of this face. If it is an inner face,
+ // it has no boundary marker, set it be zero.
+ if (b->useshelles) {
+ // Shell face is used.
+ tspivot(tface, checkmark);
+ if (checkmark.sh == dummysh) {
+ marker = 0; // It is an inner face.
+ } else {
+ faceid = shellmark(checkmark) - 1;
+ marker = in->facetmarkerlist[faceid];
+ }
+ } else {
+ // Shell face is not used, only distinguish outer and inner face.
+ marker = tsymface.tet != dummytet ? 1 : 0;
+ }
+ }
+ if (out == (tetgenio *) NULL) {
+ // Face number, indices of three vertices.
+ fprintf(outfile, "%5d %4d %4d %4d", facenumber,
+ pointmark(torg), pointmark(tdest), pointmark(tapex));
+ if (bmark) {
+ // Output a boundary marker.
+ fprintf(outfile, " %d", marker);
+ }
+ fprintf(outfile, "\n");
+ } else {
+ // Output indices of three vertices.
+ elist[index++] = pointmark(torg);
+ elist[index++] = pointmark(tdest);
+ elist[index++] = pointmark(tapex);
+ if (bmark) {
+ emlist[facenumber - in->firstnumber] = marker;
+ }
+ }
+ facenumber++;
+ }
+ }
+ tface.tet = tetrahedrontraverse();
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outhullfaces() Output outer boundary faces to a .face file or a //
+// tetgenio structure. //
+// //
+// The normal of each face is arranged to point inside of the domain (use //
+// right-hand rule). This routines will outputs convex hull faces if the //
+// mesh is a Delaunay tetrahedralization. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outhullfaces(tetgenio* out)
+{
+ FILE *outfile;
+ char facefilename[FILENAMESIZE];
+ int *elist;
+ int index;
+ triface tface, tsymface;
+ face checkmark;
+ point torg, tdest, tapex;
+ int facenumber;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(facefilename, b->outfilename);
+ strcat(facefilename, ".face");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", facefilename);
+ } else {
+ printf("Writing faces.\n");
+ }
+ }
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(facefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", facefilename);
+ exit(1);
+ }
+ fprintf(outfile, "%ld 0\n", hullsize);
+ } else {
+ // Allocate memory for 'trifacelist'.
+ out->trifacelist = new int[hullsize * 3];
+ if (out->trifacelist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ out->numberoftrifaces = hullsize;
+ elist = out->trifacelist;
+ index = 0;
+ }
+
+ tetrahedrons->traversalinit();
+ tface.tet = tetrahedrontraverse();
+ facenumber = in->firstnumber;
+ // To loop over the set of hull faces, loop over all tetrahedra, and look
+ // at the four faces of each one. If there isn't another tetrahedron
+ // adjacent to this face, operate on the face.
+ while (tface.tet != (tetrahedron *) NULL) {
+ for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
+ sym(tface, tsymface);
+ if (tsymface.tet == dummytet) {
+ torg = org(tface);
+ tdest = dest(tface);
+ tapex = apex(tface);
+ if (out == (tetgenio *) NULL) {
+ // Face number, indices of three vertices.
+ fprintf(outfile, "%5d %4d %4d %4d", facenumber,
+ pointmark(torg), pointmark(tdest), pointmark(tapex));
+ fprintf(outfile, "\n");
+ } else {
+ // Output indices of three vertices.
+ elist[index++] = pointmark(torg);
+ elist[index++] = pointmark(tdest);
+ elist[index++] = pointmark(tapex);
+ }
+ facenumber++;
+ }
+ }
+ tface.tet = tetrahedrontraverse();
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outsubfaces() Output subfaces (i.e. boundary faces) to a .face file or //
+// a tetgenio structure. //
+// //
+// The boundary faces are exist in 'subfaces'. For listing triangle vertices //
+// in the same sense for all triangles in the mesh, the direction determined //
+// by right-hand rule is pointer to the inside of the volume. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outsubfaces(tetgenio* out)
+{
+ FILE *outfile;
+ char facefilename[FILENAMESIZE];
+ int *elist;
+ int *emlist;
+ int index;
+ triface abuttingtet;
+ face faceloop;
+ point torg, tdest, tapex;
+ int bmark, faceid, marker;
+ int facenumber;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(facefilename, b->outfilename);
+ strcat(facefilename, ".face");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", facefilename);
+ } else {
+ printf("Writing faces.\n");
+ }
+ }
+
+ bmark = !b->nobound && in->facetmarkerlist;
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(facefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", facefilename);
+ exit(1);
+ }
+ // Number of subfaces.
+ fprintf(outfile, "%ld %d\n", subfaces->items, bmark);
+ } else {
+ // Allocate memory for 'trifacelist'.
+ out->trifacelist = new int[subfaces->items * 3];
+ if (out->trifacelist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ // Allocate memory for 'trifacemarkerlist', if necessary.
+ if (bmark) {
+ out->trifacemarkerlist = new int[subfaces->items];
+ if (out->trifacemarkerlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+ out->numberoftrifaces = subfaces->items;
+ elist = out->trifacelist;
+ emlist = out->trifacemarkerlist;
+ index = 0;
+ }
+
+ subfaces->traversalinit();
+ faceloop.sh = shellfacetraverse(subfaces);
+ facenumber = in->firstnumber;
+ while (faceloop.sh != (shellface *) NULL) {
+ stpivot(faceloop, abuttingtet);
+ if (abuttingtet.tet == dummytet) {
+ sesymself(faceloop);
+ stpivot(faceloop, abuttingtet);
+ // assert(abuttingtet.tet != dummytet) {
+ }
+ if (abuttingtet.tet != dummytet) {
+ // If there is a tetrahedron containing this subface, orient it so
+ // that the normal of this face points to inside of the volume by
+ // right-hand rule.
+ adjustedgering(abuttingtet, CCW);
+ torg = org(abuttingtet);
+ tdest = dest(abuttingtet);
+ tapex = apex(abuttingtet);
+ } else {
+ // This may happen when only a surface mesh be generated.
+ torg = sorg(faceloop);
+ tdest = sdest(faceloop);
+ tapex = sapex(faceloop);
+ }
+ if (bmark) {
+ faceid = shellmark(faceloop) - 1;
+ marker = in->facetmarkerlist[faceid];
+ }
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "%5d %4d %4d %4d", facenumber,
+ pointmark(torg), pointmark(tdest), pointmark(tapex));
+ if (bmark) {
+ fprintf(outfile, " %d", marker);
+ }
+ fprintf(outfile, "\n");
+ } else {
+ // Output three vertices of this face;
+ elist[index++] = pointmark(torg);
+ elist[index++] = pointmark(tdest);
+ elist[index++] = pointmark(tapex);
+ if (bmark) {
+ emlist[facenumber - in->firstnumber] = marker;
+ }
+ }
+ facenumber++;
+ faceloop.sh = shellfacetraverse(subfaces);
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outsubsegments() Output segments (i.e. boundary edges) to a .edge file //
+// or a tetgenio structure. //
+// //
+// The boundary edges are stored in 'subsegs'. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outsubsegments(tetgenio* out)
+{
+ FILE *outfile;
+ char edgefilename[FILENAMESIZE];
+ int *elist;
+ int index;
+ face edgeloop;
+ point torg, tdest;
+ int edgenumber;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(edgefilename, b->outfilename);
+ strcat(edgefilename, ".edge");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", edgefilename);
+ } else {
+ printf("Writing faces.\n");
+ }
+ }
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(edgefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", edgefilename);
+ exit(1);
+ }
+ // Number of subsegments.
+ fprintf(outfile, "%ld\n", subsegs->items);
+ } else {
+ // Allocate memory for 'edgelist'.
+ out->edgelist = new int[subsegs->items * 2];
+ if (out->edgelist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ out->numberofedges = subsegs->items;
+ elist = out->edgelist;
+ index = 0;
+ }
+
+ subsegs->traversalinit();
+ edgeloop.sh = shellfacetraverse(subsegs);
+ edgenumber = in->firstnumber;
+ while (edgeloop.sh != (shellface *) NULL) {
+ torg = sorg(edgeloop);
+ tdest = sdest(edgeloop);
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "%5d %4d %4d\n", edgenumber, pointmark(torg),
+ pointmark(tdest));
+ } else {
+ // Output three vertices of this face;
+ elist[index++] = pointmark(torg);
+ elist[index++] = pointmark(tdest);
+ }
+ edgenumber++;
+ edgeloop.sh = shellfacetraverse(subsegs);
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outneighbors() Output a list of neighbors to a .neigh file or a //
+// tetgenio structure. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outneighbors(tetgenio* out)
+{
+ FILE *outfile;
+ char neighborfilename[FILENAMESIZE];
+ int *nlist;
+ int index;
+ tetrahedron *tptr;
+ triface tetloop, tetsym;
+ int neighbor1, neighbor2, neighbor3, neighbor4;
+ int elementnumber;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(neighborfilename, b->outfilename);
+ strcat(neighborfilename, ".neigh");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", neighborfilename);
+ } else {
+ printf("Writing neighbors.\n");
+ }
+ }
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(neighborfilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", neighborfilename);
+ exit(1);
+ }
+ // Number of tetrahedra, four faces per tetrahedron.
+ fprintf(outfile, "%ld %d\n", tetrahedrons->items, 4);
+ } else {
+ // Allocate memory for 'neighborlist'.
+ out->neighborlist = new int[tetrahedrons->items * 4];
+ if (out->neighborlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ nlist = out->neighborlist;
+ index = 0;
+ }
+
+ tetrahedrons->traversalinit();
+ tptr = tetrahedrontraverse();
+ elementnumber = in->firstnumber;
+ while (tptr != (tetrahedron *) NULL) {
+ * (int *) (tptr + 8) = elementnumber;
+ tptr = tetrahedrontraverse();
+ elementnumber++;
+ }
+ * (int *) (dummytet + 8) = -1;
+
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ elementnumber = in->firstnumber;
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ tetloop.loc = 2;
+ sym(tetloop, tetsym);
+ neighbor1 = * (int *) (tetsym.tet + 8);
+ tetloop.loc = 3;
+ sym(tetloop, tetsym);
+ neighbor2 = * (int *) (tetsym.tet + 8);
+ tetloop.loc = 1;
+ sym(tetloop, tetsym);
+ neighbor3 = * (int *) (tetsym.tet + 8);
+ tetloop.loc = 0;
+ sym(tetloop, tetsym);
+ neighbor4 = * (int *) (tetsym.tet + 8);
+ if (out == (tetgenio *) NULL) {
+ // Tetrahedra number, neighboring tetrahedron numbers.
+ fprintf(outfile, "%4d %4d %4d %4d %4d\n", elementnumber,
+ neighbor1, neighbor2, neighbor3, neighbor4);
+ } else {
+ nlist[index++] = neighbor1;
+ nlist[index++] = neighbor2;
+ nlist[index++] = neighbor3;
+ nlist[index++] = neighbor4;
+ }
+ tetloop.tet = tetrahedrontraverse();
+ elementnumber++;
+ }
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outpbcnodes() Output a list of node pairs to a .pbc file or a tetgenio //
+// structure. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outpbcnodes(tetgenio* out)
+{
+ FILE *outfile;
+ char pbcfilename[FILENAMESIZE];
+ list *ptpairlist;
+ tetgenio::pbcgroup *pgi, *pgo;
+ pbcdata *pd;
+ face faceloop;
+ face checkseg, symseg;
+ point *ptpair, pa, pb;
+ REAL sympt[3];
+ int *worklist;
+ int index, idx;
+ int i, j, k, l;
+
+ if (out == (tetgenio *) NULL) {
+ strcpy(pbcfilename, b->outfilename);
+ strcat(pbcfilename, ".pbc");
+ }
+
+ if (!b->quiet) {
+ if (out == (tetgenio *) NULL) {
+ printf("Writing %s.\n", pbcfilename);
+ } else {
+ printf("Writing pbc nodes.\n");
+ }
+ }
+
+ if (out == (tetgenio *) NULL) {
+ outfile = fopen(pbcfilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", pbcfilename);
+ exit(1);
+ }
+ // Number of pbc groups.
+ fprintf(outfile, "# number of PBCs.\n");
+ fprintf(outfile, "%d\n\n", in->numberofpbcgroups);
+ } else {
+ out->numberofpbcgroups = in->numberofpbcgroups;
+ // Allocate memory for 'out->pbcgrouplist'.
+ out->pbcgrouplist = new tetgenio::pbcgroup[in->numberofpbcgroups];
+ if (out->neighborlist == (int *) NULL) {
+ printf("Error: Out of memory.\n");
+ exit(1);
+ }
+ }
+
+ ptpairlist = new list(2 * sizeof(point *), NULL, 256);
+ worklist = new int[points->items + 1];
+ for (i = 0; i < points->items + 1; i++) worklist[i] = 0;
+
+ for (i = 0; i < in->numberofpbcgroups; i++) {
+ // Group i.
+ pgi = &(in->pbcgrouplist[i]);
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# PBC %d\n", in->firstnumber + i);
+ // Output facet markers.
+ fprintf(outfile, "%d %d\n", pgi->fmark1, pgi->fmark2);
+ // Output transformation matrix.
+ fprintf(outfile, "[\n");
+ for (j = 0; j < 4; j++) {
+ fprintf(outfile, " %.12g %.12g %.12g %.12g\n", pgi->transmat[j][0],
+ pgi->transmat[j][1], pgi->transmat[j][2], pgi->transmat[j][3]);
+ }
+ fprintf(outfile, "]\n");
+ } else {
+ pgo = &(out->pbcgrouplist[i]);
+ // Copy data from pgi to pgo.
+ pgo->fmark1 = pgi->fmark1;
+ pgo->fmark2 = pgi->fmark2;
+ for (j = 0; j < 4; j++) {
+ for (k = 0; k < 4; k++) pgo->transmat[j][k] = pgi->transmat[j][k];
+ }
+ }
+
+ // Find the point pairs of group i.
+ subfaces->traversalinit();
+ faceloop.sh = shellfacetraverse(subfaces);
+ while (faceloop.sh != (shellface *) NULL) {
+ if (shellpbcgroup(faceloop) == i) {
+ // It is in group i. Operate on it if it has pgi->fmark1.
+ idx = shellmark(faceloop) - 1;
+ if (in->facetmarkerlist[idx] == pgi->fmark1) {
+ // Loop three edges of the subface.
+ for (j = 0; j < 3; j++) {
+ sspivot(faceloop, checkseg);
+ // Loop two vertices of the edge.
+ for (k = 0; k < 2; k++) {
+ if (k == 0) pa = sorg(faceloop);
+ else pa = sdest(faceloop);
+ if (worklist[pointmark(pa)] == 0) {
+ pb = (point) NULL;
+ if (checkseg.sh != dummysh) {
+ // pa is on a segment. Find pb.
+ // Find the incident pbcgroup of checkseg.
+ idx = shellmark(checkseg) - 1;
+ for (l = idx2segpglist[idx]; l < idx2segpglist[idx + 1];
+ l++) {
+ pd = (pbcdata *)(* segpbcgrouptable)[segpglist[l]];
+ if (((pd->fmark[0] == pgi->fmark1) &&
+ (pd->fmark[1] == pgi->fmark2)) ||
+ ((pd->fmark[0] == pgi->fmark2) &&
+ (pd->fmark[1] == pgi->fmark1))) break;
+ }
+ assert(l < idx2segpglist[idx + 1]);
+ getsegpbcsympoint(pa, &checkseg, sympt, &symseg,
+ segpglist[l]);
+ pb = sorg(symseg);
+ } else {
+ // Operate on pa if it is inside the facet.
+ if (pointtype(pa) == FREESUBVERTEX) {
+ pb = point2pbcpt(pa);
+ }
+ }
+ if (pb != (point) NULL) {
+ // Add the pair (pa, pb) into list.
+ ptpair = (point *) ptpairlist->append(NULL);
+ ptpair[0] = pa;
+ ptpair[1] = pb;
+ // Mark pa (avoid to operate on it later).
+ worklist[pointmark(pa)] = 1;
+ }
+ }
+ }
+ // Get the next edge.
+ senextself(faceloop);
+ }
+ }
+ }
+ faceloop.sh = shellfacetraverse(subfaces);
+ }
+
+ // Output the list of pbc points.
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "%d\n", ptpairlist->len());
+ } else {
+ pgo->numberofpointpairs = ptpairlist->len();
+ pgo->pointpairlist = new int[pgo->numberofpointpairs * 2];
+ index = 0;
+ }
+ for (j = 0; j < ptpairlist->len(); j++) {
+ ptpair = (point *)(* ptpairlist)[j];
+ pa = ptpair[0];
+ pb = ptpair[1];
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, " %4d %4d\n", pointmark(pa), pointmark(pb));
+ } else {
+ pgo->pointpairlist[index++] = pointmark(pa);
+ pgo->pointpairlist[index++] = pointmark(pb);
+ }
+ // Unmark pa.
+ worklist[pointmark(pa)] = 0;
+ }
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "\n");
+ }
+ ptpairlist->clear();
+ }
+
+ delete [] worklist;
+ delete ptpairlist;
+
+ if (out == (tetgenio *) NULL) {
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outsmesh() Write surface mesh to a .smesh file, which can be read and //
+// tetrahedralized by TetGen. //
+// //
+// You can specify a filename (without suffix) in 'smfilename'. If you don't //
+// supply a filename (let smfilename be NULL), the default name stored in //
+// 'tetgenbehavior' will be used. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outsmesh(char* smfilename)
+{
+ FILE *outfile;
+ char smefilename[FILENAMESIZE];
+ face faceloop;
+ point pointloop;
+ point p1, p2, p3;
+ int pointnumber;
+ int nextras, bmark;
+ int faceid, marker;
+
+ if (smfilename != (char *) NULL && smfilename[0] != '\0') {
+ strcpy(smefilename, smfilename);
+ } else if (b->outfilename[0] != '\0') {
+ strcpy(smefilename, b->outfilename);
+ } else {
+ strcpy(smefilename, "unnamed");
+ }
+ strcat(smefilename, ".smesh");
+
+ if (!b->quiet) {
+ printf("Writing %s.\n", smefilename);
+ }
+ outfile = fopen(smefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", smefilename);
+ return;
+ }
+
+ fprintf(outfile, "# %s. TetGen's input file.\n", smefilename);
+
+ nextras = in->numberofpointattributes;
+ bmark = !b->nobound && in->pointmarkerlist;
+
+ fprintf(outfile, "\n# part 1: node list.\n");
+ // Number of points, number of dimensions, number of point attributes,
+ // and number of boundary markers (zero or one).
+ fprintf(outfile, "%ld %d %d %d\n", points->items, 3, nextras, bmark);
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ pointnumber = in->firstnumber;
+ while (pointloop != (point) NULL) {
+ // Point coordinates.
+ fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
+ pointloop[0], pointloop[1], pointloop[2]);
+ if (in->numberofpointattributes > 0) {
+ // Write an attribute, ignore others if more than one.
+ fprintf(outfile, " %.17g", pointloop[3]);
+ }
+ fprintf(outfile, "\n");
+ setpointmark(pointloop, pointnumber);
+ pointloop = pointtraverse();
+ pointnumber++;
+ }
+
+ bmark = !b->nobound && in->facetmarkerlist;
+
+ fprintf(outfile, "\n# part 2: facet list.\n");
+ // Number of facets, boundary marker.
+ fprintf(outfile, "%ld %d\n", subfaces->items, bmark);
+
+ subfaces->traversalinit();
+ faceloop.sh = shellfacetraverse(subfaces);
+ while (faceloop.sh != (shellface *) NULL) {
+ p1 = sorg(faceloop);
+ p2 = sdest(faceloop);
+ p3 = sapex(faceloop);
+ if (bmark) {
+ faceid = shellmark(faceloop) - 1;
+ marker = in->facetmarkerlist[faceid];
+ }
+ fprintf(outfile, "3 %4d %4d %4d", pointmark(p1), pointmark(p2),
+ pointmark(p3));
+ if (bmark) {
+ fprintf(outfile, " %d", marker);
+ }
+ fprintf(outfile, "\n");
+ faceloop.sh = shellfacetraverse(subfaces);
+ }
+
+ fprintf(outfile, "\n# part 3: hole list.\n");
+ fprintf(outfile, "0\n");
+
+ fprintf(outfile, "\n# part 4: region list.\n");
+ fprintf(outfile, "0\n");
+
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outmesh2medit() Write mesh to a .mesh file, which can be read and //
+// rendered by Medit (a free mesh viewer from INRIA). //
+// //
+// You can specify a filename (without suffix) in 'mfilename'. If you don't //
+// supply a filename (let mfilename be NULL), the default name stored in //
+// 'tetgenbehavior' will be used. The output file will have the suffix .mesh.//
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outmesh2medit(char* mfilename)
+{
+ FILE *outfile;
+ char mefilename[FILENAMESIZE];
+ tetrahedron* tetptr;
+ triface tface, tsymface;
+ face segloop, checkmark;
+ point pointloop, p1, p2, p3, p4;
+ long faces;
+ int pointnumber;
+ int i;
+
+ if (mfilename != (char *) NULL && mfilename[0] != '\0') {
+ strcpy(mefilename, mfilename);
+ } else if (b->outfilename[0] != '\0') {
+ strcpy(mefilename, b->outfilename);
+ } else {
+ strcpy(mefilename, "unnamed");
+ }
+ strcat(mefilename, ".mesh");
+
+ if (!b->quiet) {
+ printf("Writing %s.\n", mefilename);
+ }
+ outfile = fopen(mefilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", mefilename);
+ return;
+ }
+
+ fprintf(outfile, "MeshVersionFormatted 1\n");
+ fprintf(outfile, "\n");
+ fprintf(outfile, "Dimension\n");
+ fprintf(outfile, "3\n");
+ fprintf(outfile, "\n");
+
+ fprintf(outfile, "\n# Set of mesh vertices\n");
+ fprintf(outfile, "Vertices\n");
+ fprintf(outfile, "%ld\n", points->items);
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ pointnumber = 1; // Medit need start number form 1.
+ while (pointloop != (point) NULL) {
+ // Point coordinates.
+ fprintf(outfile, "%.17g %.17g %.17g",
+ pointloop[0], pointloop[1], pointloop[2]);
+ if (in->numberofpointattributes > 0) {
+ // Write an attribute, ignore others if more than one.
+ fprintf(outfile, " %.17g\n", pointloop[3]);
+ } else {
+ fprintf(outfile, " 0\n");
+ }
+ setpointmark(pointloop, pointnumber);
+ pointloop = pointtraverse();
+ pointnumber++;
+ }
+
+ // Compute the number of edges.
+ faces = (4l * tetrahedrons->items + hullsize) / 2l;
+
+ fprintf(outfile, "\n# Set of Triangles\n");
+ fprintf(outfile, "Triangles\n");
+ fprintf(outfile, "%ld\n", faces);
+
+ tetrahedrons->traversalinit();
+ tface.tet = tetrahedrontraverse();
+ // To loop over the set of faces, loop over all tetrahedra, and look at
+ // the four faces of each tetrahedron. If there isn't another tetrahedron
+ // adjacent to the face, operate on the face. If there is another adj-
+ // acent tetrahedron, operate on the face only if the current tetrahedron
+ // has a smaller pointer than its neighbor. This way, each face is
+ // considered only once.
+ while (tface.tet != (tetrahedron *) NULL) {
+ for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
+ sym(tface, tsymface);
+ if (tface.tet < tsymface.tet || tsymface.tet == dummytet) {
+ p1 = org (tface);
+ p2 = dest(tface);
+ p3 = apex(tface);
+ fprintf(outfile, "%5d %5d %5d",
+ pointmark(p1), pointmark(p2), pointmark(p3));
+ fprintf(outfile, " 0\n");
+ }
+ }
+ tface.tet = tetrahedrontraverse();
+ }
+
+ fprintf(outfile, "\n# Set of Tetrahedra\n");
+ fprintf(outfile, "Tetrahedra\n");
+ fprintf(outfile, "%ld\n", tetrahedrons->items);
+
+ tetrahedrons->traversalinit();
+ tetptr = tetrahedrontraverse();
+ while (tetptr != (tetrahedron *) NULL) {
+ p1 = (point) tetptr[4];
+ p2 = (point) tetptr[5];
+ p3 = (point) tetptr[6];
+ p4 = (point) tetptr[7];
+ fprintf(outfile, "%5d %5d %5d %5d",
+ pointmark(p1), pointmark(p2), pointmark(p3), pointmark(p4));
+ if (in->numberoftetrahedronattributes > 0) {
+ fprintf(outfile, " %.17g", elemattribute(tetptr, 0));
+ } else {
+ fprintf(outfile, " 0");
+ }
+ fprintf(outfile, "\n");
+ tetptr = tetrahedrontraverse();
+ }
+
+ fprintf(outfile, "\nCorners\n");
+ fprintf(outfile, "%d\n", in->numberofpoints);
+
+ for (i = 0; i < in->numberofpoints; i++) {
+ fprintf(outfile, "%4d\n", i + 1);
+ }
+
+ if (b->useshelles) {
+ fprintf(outfile, "\nEdges\n");
+ fprintf(outfile, "%ld\n", subsegs->items);
+
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ p1 = sorg(segloop);
+ p2 = sdest(segloop);
+ fprintf(outfile, "%5d %5d", pointmark(p1), pointmark(p2));
+ fprintf(outfile, " 0\n");
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+ }
+
+ fprintf(outfile, "\nEnd\n");
+ fclose(outfile);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outmesh2gid() Write mesh to a .ele.msh file and a .face.msh file, //
+// which can be imported and rendered by Gid. //
+// //
+// You can specify a filename (without suffix) in 'gfilename'. If you don't //
+// supply a filename (let gfilename be NULL), the default name stored in //
+// 'tetgenbehavior' will be used. The suffixes (.ele.msh and .face.msh) will //
+// be automatically added. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outmesh2gid(char* gfilename)
+{
+ FILE *outfile;
+ char gidfilename[FILENAMESIZE];
+ tetrahedron* tetptr;
+ triface tface, tsymface;
+ face sface;
+ point pointloop, p1, p2, p3, p4;
+ int pointnumber;
+ int elementnumber;
+
+ if (gfilename != (char *) NULL && gfilename[0] != '\0') {
+ strcpy(gidfilename, gfilename);
+ } else if (b->outfilename[0] != '\0') {
+ strcpy(gidfilename, b->outfilename);
+ } else {
+ strcpy(gidfilename, "unnamed");
+ }
+ strcat(gidfilename, ".ele.msh");
+
+ if (!b->quiet) {
+ printf("Writing %s.\n", gidfilename);
+ }
+ outfile = fopen(gidfilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", gidfilename);
+ return;
+ }
+
+ fprintf(outfile, "mesh dimension = 3 elemtype tetrahedron nnode = 4\n");
+ fprintf(outfile, "coordinates\n");
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ pointnumber = 1; // Gid need start number form 1.
+ while (pointloop != (point) NULL) {
+ // Point coordinates.
+ fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
+ pointloop[0], pointloop[1], pointloop[2]);
+ if (in->numberofpointattributes > 0) {
+ // Write an attribute, ignore others if more than one.
+ fprintf(outfile, " %.17g", pointloop[3]);
+ }
+ fprintf(outfile, "\n");
+ setpointmark(pointloop, pointnumber);
+ pointloop = pointtraverse();
+ pointnumber++;
+ }
+
+ fprintf(outfile, "end coordinates\n");
+ fprintf(outfile, "elements\n");
+
+ tetrahedrons->traversalinit();
+ tetptr = tetrahedrontraverse();
+ elementnumber = 1;
+ while (tetptr != (tetrahedron *) NULL) {
+ p1 = (point) tetptr[4];
+ p2 = (point) tetptr[5];
+ p3 = (point) tetptr[6];
+ p4 = (point) tetptr[7];
+ fprintf(outfile, "%5d %5d %5d %5d %5d", elementnumber,
+ pointmark(p1), pointmark(p2), pointmark(p3), pointmark(p4));
+ if (in->numberoftetrahedronattributes > 0) {
+ fprintf(outfile, " %.17g", elemattribute(tetptr, 0));
+ }
+ fprintf(outfile, "\n");
+ tetptr = tetrahedrontraverse();
+ elementnumber++;
+ }
+
+ fprintf(outfile, "end elements\n");
+ fclose(outfile);
+
+ if (gfilename != (char *) NULL && gfilename[0] != '\0') {
+ strcpy(gidfilename, gfilename);
+ } else if (b->outfilename[0] != '\0') {
+ strcpy(gidfilename, b->outfilename);
+ } else {
+ strcpy(gidfilename, "unnamed");
+ }
+ strcat(gidfilename, ".face.msh");
+
+ if (!b->quiet) {
+ printf("Writing %s.\n", gidfilename);
+ }
+ outfile = fopen(gidfilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", gidfilename);
+ return;
+ }
+
+ fprintf(outfile, "mesh dimension = 3 elemtype triangle nnode = 3\n");
+ fprintf(outfile, "coordinates\n");
+
+ points->traversalinit();
+ pointloop = pointtraverse();
+ pointnumber = 1; // Gid need start number form 1.
+ while (pointloop != (point) NULL) {
+ // Point coordinates.
+ fprintf(outfile, "%4d %.17g %.17g %.17g", pointnumber,
+ pointloop[0], pointloop[1], pointloop[2]);
+ if (in->numberofpointattributes > 0) {
+ // Write an attribute, ignore others if more than one.
+ fprintf(outfile, " %.17g", pointloop[3]);
+ }
+ fprintf(outfile, "\n");
+ setpointmark(pointloop, pointnumber);
+ pointloop = pointtraverse();
+ pointnumber++;
+ }
+
+ fprintf(outfile, "end coordinates\n");
+ fprintf(outfile, "elements\n");
+
+ tetrahedrons->traversalinit();
+ tface.tet = tetrahedrontraverse();
+ elementnumber = 1;
+ while (tface.tet != (tetrahedron *) NULL) {
+ for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
+ sym(tface, tsymface);
+ if ((tface.tet < tsymface.tet) || (tsymface.tet == dummytet)) {
+ p1 = org(tface);
+ p2 = dest(tface);
+ p3 = apex(tface);
+ if (tsymface.tet == dummytet) {
+ // It's a hull face, output it.
+ fprintf(outfile, "%5d %d %d %d\n", elementnumber,
+ pointmark(p1), pointmark(p2), pointmark(p3));
+ elementnumber++;
+ } else if (b->useshelles) {
+ // Only output it if it's a subface.
+ tspivot(tface, sface);
+ if (sface.sh != dummysh) {
+ fprintf(outfile, "%5d %d %d %d\n", elementnumber,
+ pointmark(p1), pointmark(p2), pointmark(p3));
+ elementnumber++;
+ }
+ }
+ }
+ }
+ tface.tet = tetrahedrontraverse();
+ }
+
+ fprintf(outfile, "end elements\n");
+ fclose(outfile);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// outmesh2off() Write the mesh to an .off file. //
+// //
+// .off, the Object File Format, is one of the popular file formats from the //
+// Geometry Center's Geomview package (http://www.geomview.org). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::outmesh2off(char* ofilename)
+{
+ FILE *outfile;
+ char offfilename[FILENAMESIZE];
+ triface tface, tsymface;
+ point pointloop, p1, p2, p3;
+ long faces;
+ int shift;
+
+ if (ofilename != (char *) NULL && ofilename[0] != '\0') {
+ strcpy(offfilename, ofilename);
+ } else if (b->outfilename[0] != '\0') {
+ strcpy(offfilename, b->outfilename);
+ } else {
+ strcpy(offfilename, "unnamed");
+ }
+ strcat(offfilename, ".off");
+
+ if (!b->quiet) {
+ printf("Writing %s.\n", offfilename);
+ }
+ outfile = fopen(offfilename, "w");
+ if (outfile == (FILE *) NULL) {
+ printf("File I/O Error: Cannot create file %s.\n", offfilename);
+ return;
+ }
+
+ // Calculate the number of triangular faces in the tetrahedral mesh.
+ faces = (4l * tetrahedrons->items + hullsize) / 2l;
+
+ // Number of points, faces, and edges(not used, here show hullsize).
+ fprintf(outfile, "OFF\n%ld %ld %ld\n", points->items, faces, hullsize);
+
+ // Write the points.
+ points->traversalinit();
+ pointloop = pointtraverse();
+ while (pointloop != (point) NULL) {
+ fprintf(outfile, " %.17g %.17g %.17g\n", pointloop[0], pointloop[1],
+ pointloop[2]);
+ pointloop = pointtraverse();
+ }
+
+ // OFF always use zero as the first index.
+ shift = in->firstnumber == 1 ? 1 : 0;
+
+ tetrahedrons->traversalinit();
+ tface.tet = tetrahedrontraverse();
+ // To loop over the set of faces, loop over all tetrahedra, and look at
+ // the four faces of each tetrahedron. If there isn't another tetrahedron
+ // adjacent to the face, operate on the face. If there is another adj-
+ // acent tetrahedron, operate on the face only if the current tetrahedron
+ // has a smaller pointer than its neighbor. This way, each face is
+ // considered only once.
+ while (tface.tet != (tetrahedron *) NULL) {
+ for (tface.loc = 0; tface.loc < 4; tface.loc ++) {
+ sym(tface, tsymface);
+ if ((tface.tet < tsymface.tet) || (tsymface.tet == dummytet)) {
+ p1 = org(tface);
+ p2 = dest(tface);
+ p3 = apex(tface);
+ // Face number, indices of three vertexs.
+ fprintf(outfile, "3 %4d %4d %4d\n", pointmark(p1) - shift,
+ pointmark(p2) - shift, pointmark(p3) - shift);
+ }
+ }
+ tface.tet = tetrahedrontraverse();
+ }
+
+ fprintf(outfile, "# Generated by %s\n", b->commandline);
+ fclose(outfile);
+}
+
+//
+// End of I/O rouitnes
+//
+
+//
+// Begin of user interaction routines
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// internalerror() Ask the user to send me the defective product. Exit. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::internalerror()
+{
+ printf(" Please report this bug to sihang@mail.berlios.de. Include the\n");
+ printf(" message above, your input data set, and the exact command\n");
+ printf(" line you used to run this program, thank you.\n");
+ exit(1);
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkmesh() Test the mesh for topological consistency. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::checkmesh()
+{
+ triface tetraloop;
+ triface oppotet, oppooppotet;
+ point tetorg, tetdest, tetapex, tetoppo;
+ point oppodest, oppoapex;
+ REAL oritest;
+ int horrors;
+
+ if (!b->quiet) {
+ printf(" Checking consistency of mesh...\n");
+ }
+ horrors = 0;
+ // Run through the list of tetrahedra, checking each one.
+ tetrahedrons->traversalinit();
+ tetraloop.tet = tetrahedrontraverse();
+ while (tetraloop.tet != (tetrahedron *) NULL) {
+ // Check all four faces of the tetrahedron.
+ for (tetraloop.loc = 0; tetraloop.loc < 4; tetraloop.loc++) {
+ tetorg = org(tetraloop);
+ tetdest = dest(tetraloop);
+ tetapex = apex(tetraloop);
+ tetoppo = oppo(tetraloop);
+ if (tetraloop.loc == 0) { // Only test for inversion once.
+ oritest = orient3d(tetorg, tetdest, tetapex, tetoppo);
+ if (oritest >= 0.0) {
+ printf(" !! !! %s ", oritest > 0.0 ? "Inverted" : "Degenerated");
+ printtet(&tetraloop);
+ printf(" orient3d = %.17g.\n", oritest);
+ horrors++;
+ }
+ }
+ // Find the neighboring tetrahedron on this face.
+ sym(tetraloop, oppotet);
+ if (oppotet.tet != dummytet) {
+ // Check that the tetrahedron's neighbor knows it's a neighbor.
+ sym(oppotet, oppooppotet);
+ if ((tetraloop.tet != oppooppotet.tet)
+ || (tetraloop.loc != oppooppotet.loc)) {
+ printf(" !! !! Asymmetric tetra-tetra bond:\n");
+ if (tetraloop.tet == oppooppotet.tet) {
+ printf(" (Right tetrahedron, wrong orientation)\n");
+ }
+ printf(" First ");
+ printtet(&tetraloop);
+ printf(" Second (nonreciprocating) ");
+ printtet(&oppotet);
+ horrors++;
+ }
+ // Check that both tetrahedra agree on the identities
+ // of their shared vertices.
+ if (findorg(&oppotet, tetorg)) {
+ oppodest = dest(oppotet);
+ oppoapex = apex(oppotet);
+ } else {
+ oppodest = (point) NULL;
+ }
+ if ((tetdest != oppoapex) || (tetapex != oppodest)) {
+ printf(" !! !! Mismatched face coordinates between two tetras:\n");
+ printf(" First mismatched ");
+ printtet(&tetraloop);
+ printf(" Second mismatched ");
+ printtet(&oppotet);
+ horrors++;
+ }
+ }
+ }
+ tetraloop.tet = tetrahedrontraverse();
+ }
+ if (horrors == 0) {
+ if (!b->quiet) {
+ printf(" In my studied opinion, the mesh appears to be consistent.\n");
+ }
+ } else if (horrors == 1) {
+ printf(" !! !! !! !! Precisely one festering wound discovered.\n");
+ } else {
+ printf(" !! !! !! !! %d abominations witnessed.\n", horrors);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkshells() Test the boundary mesh for topological consistency. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::checkshells()
+{
+ triface oppotet, oppooppotet, testtet;
+ face shloop, segloop, spin;
+ face testsh, testseg, testshsh;
+ point shorg, shdest, segorg, segdest;
+ REAL checksign;
+ bool same;
+ int horrors;
+ int i;
+
+ if (!b->quiet) {
+ printf(" Checking consistency of the mesh boundary...\n");
+ }
+ horrors = 0;
+
+ // Run through the list of subfaces, checking each one.
+ subfaces->traversalinit();
+ shloop.sh = shellfacetraverse(subfaces);
+ while (shloop.sh != (shellface *) NULL) {
+ // Check two connected tetrahedra if they exist.
+ shloop.shver = 0;
+ stpivot(shloop, oppotet);
+ if (oppotet.tet != dummytet) {
+ tspivot(oppotet, testsh);
+ if (testsh.sh != shloop.sh) {
+ printf(" !! !! Wrong tetra-subface connection.\n");
+ printf(" Tetra: ");
+ printtet(&oppotet);
+ printf(" Subface: ");
+ printsh(&shloop);
+ horrors++;
+ }
+ if (oppo(oppotet) != (point) NULL) {
+ adjustedgering(oppotet, CCW);
+ checksign = orient3d(sorg(shloop), sdest(shloop), sapex(shloop),
+ oppo(oppotet));
+ if (checksign >= 0.0) {
+ printf(" !! !! Wrong subface orientation.\n");
+ printf(" Subface: ");
+ printsh(&shloop);
+ horrors++;
+ }
+ }
+ }
+ sesymself(shloop);
+ stpivot(shloop, oppooppotet);
+ if (oppooppotet.tet != dummytet) {
+ tspivot(oppooppotet, testsh);
+ if (testsh.sh != shloop.sh) {
+ printf(" !! !! Wrong tetra-subface connection.\n");
+ printf(" Tetra: ");
+ printtet(&oppooppotet);
+ printf(" Subface: ");
+ printsh(&shloop);
+ horrors++;
+ }
+ if (oppotet.tet != dummytet) {
+ sym(oppotet, testtet);
+ if (testtet.tet != oppooppotet.tet) {
+ printf(" !! !! Wrong tetra-subface-tetra connection.\n");
+ printf(" Tetra 1: ");
+ printtet(&oppotet);
+ printf(" Subface: ");
+ printsh(&shloop);
+ printf(" Tetra 2: ");
+ printtet(&oppooppotet);
+ horrors++;
+ }
+ }
+ if (oppo(oppooppotet) != (point) NULL) {
+ adjustedgering(oppooppotet, CCW);
+ checksign = orient3d(sorg(shloop), sdest(shloop), sapex(shloop),
+ oppo(oppooppotet));
+ if (checksign >= 0.0) {
+ printf(" !! !! Wrong subface orientation.\n");
+ printf(" Subface: ");
+ printsh(&shloop);
+ horrors++;
+ }
+ }
+ }
+ // Check connection between subfaces.
+ shloop.shver = 0;
+ for (i = 0; i < 3; i++) {
+ shorg = sorg(shloop);
+ shdest = sdest(shloop);
+ sspivot(shloop, testseg);
+ if (testseg.sh != dummysh) {
+ segorg = sorg(testseg);
+ segdest = sdest(testseg);
+ same = ((shorg == segorg) && (shdest == segdest))
+ || ((shorg == segdest) && (shdest == segorg));
+ if (!same) {
+ printf(" !! !! Wrong subface-subsegment connection.\n");
+ printf(" Subface: ");
+ printsh(&shloop);
+ printf(" Subsegment: ");
+ printsh(&testseg);
+ horrors++;
+ }
+ }
+ spivot(shloop, testsh);
+ if (testsh.sh != dummysh) {
+ segorg = sorg(testsh);
+ segdest = sdest(testsh);
+ same = ((shorg == segorg) && (shdest == segdest))
+ || ((shorg == segdest) && (shdest == segorg));
+ if (!same) {
+ printf(" !! !! Wrong subface-subface connection.\n");
+ printf(" Subface 1: ");
+ printsh(&shloop);
+ printf(" Subface 2: ");
+ printsh(&testsh);
+ horrors++;
+ }
+ spivot(testsh, testshsh);
+ shorg = sorg(testshsh);
+ shdest = sdest(testshsh);
+ same = ((shorg == segorg) && (shdest == segdest))
+ || ((shorg == segdest) && (shdest == segorg));
+ if (!same) {
+ printf(" !! !! Wrong subface-subface connection.\n");
+ printf(" Subface 1: ");
+ printsh(&testsh);
+ printf(" Subface 2: ");
+ printsh(&testshsh);
+ horrors++;
+ }
+ if (testseg.sh == dummysh) {
+ if (testshsh.sh != shloop.sh) {
+ printf(" !! !! Wrong subface-subface connection.\n");
+ printf(" Subface 1: ");
+ printsh(&shloop);
+ printf(" Subface 2: ");
+ printsh(&testsh);
+ horrors++;
+ }
+ }
+ }
+ senextself(shloop);
+ }
+ shloop.sh = shellfacetraverse(subfaces);
+ }
+
+ // Run through the list of subsegs, checking each one.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ segorg = sorg(segloop);
+ segdest = sdest(segloop);
+ spivot(segloop, testsh);
+ if (testsh.sh == dummysh) {
+ printf(" !! !! Wrong subsegment-subface connection.\n");
+ printf(" Subsegment: ");
+ printsh(&segloop);
+ horrors++;
+ segloop.sh = shellfacetraverse(subsegs);
+ continue;
+ }
+ shorg = sorg(testsh);
+ shdest = sdest(testsh);
+ same = ((shorg == segorg) && (shdest == segdest))
+ || ((shorg == segdest) && (shdest == segorg));
+ if (!same) {
+ printf(" !! !! Wrong subsegment-subface connection.\n");
+ printf(" Subsegment : ");
+ printsh(&segloop);
+ printf(" Subface : ");
+ printsh(&testsh);
+ horrors++;
+ segloop.sh = shellfacetraverse(subsegs);
+ continue;
+ }
+ // Check the connection of face loop around this subsegment.
+ spin = testsh;
+ i = 0;
+ do {
+ spivotself(spin);
+ shorg = sorg(spin);
+ shdest = sdest(spin);
+ same = ((shorg == segorg) && (shdest == segdest))
+ || ((shorg == segdest) && (shdest == segorg));
+ if (!same) {
+ printf(" !! !! Wrong subsegment-subface connection.\n");
+ printf(" Subsegment : ");
+ printsh(&segloop);
+ printf(" Subface : ");
+ printsh(&testsh);
+ horrors++;
+ break;
+ }
+ i++;
+ } while (spin.sh != testsh.sh && i < 1000);
+ if (i >= 1000) {
+ printf(" !! !! Wrong subsegment-subface connection.\n");
+ printf(" Subsegment : ");
+ printsh(&segloop);
+ horrors++;
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+ if (horrors == 0) {
+ if (!b->quiet) {
+ printf(" Mesh boundaries connected correctly.\n");
+ }
+ } else {
+ printf(" !! !! !! !! %d boundary connection viewed with horror.\n",
+ horrors);
+ return;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkdelaunay() Ensure that the mesh is constrained Delaunay. //
+// //
+// If 'flipqueue' is not NULL, non-locally Delaunay faces are saved in it. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::checkdelaunay(REAL eps, queue* flipqueue)
+{
+ triface tetraloop;
+ triface oppotet;
+ face opposhelle;
+ point tetorg, tetdest, tetapex, tetoppo;
+ point oppooppo;
+ REAL sign;
+ int shouldbedelaunay;
+ int horrors;
+
+ if (!b->quiet) {
+ printf(" Checking Delaunay property of the mesh...\n");
+ }
+ horrors = 0;
+ // Run through the list of triangles, checking each one.
+ tetrahedrons->traversalinit();
+ tetraloop.tet = tetrahedrontraverse();
+ while (tetraloop.tet != (tetrahedron *) NULL) {
+ // Check all four faces of the tetrahedron.
+ for (tetraloop.loc = 0; tetraloop.loc < 4; tetraloop.loc++) {
+ tetorg = org(tetraloop);
+ tetdest = dest(tetraloop);
+ tetapex = apex(tetraloop);
+ tetoppo = oppo(tetraloop);
+ sym(tetraloop, oppotet);
+ oppooppo = oppo(oppotet);
+ // Only do testif there is an adjoining tetrahedron whose pointer is
+ // larger (to ensure that each pair isn't tested twice).
+ shouldbedelaunay = (oppotet.tet != dummytet)
+ && (tetoppo != (point) NULL)
+ && (oppooppo != (point) NULL)
+ && (tetraloop.tet < oppotet.tet);
+ if (checksubfaces && shouldbedelaunay) {
+ // If a shell face separates the tetrahedra, then the face is
+ // constrained, so no local Delaunay test should be done.
+ tspivot(tetraloop, opposhelle);
+ if (opposhelle.sh != dummysh){
+ shouldbedelaunay = 0;
+ }
+ }
+ if (shouldbedelaunay) {
+ sign = insphere(tetdest, tetorg, tetapex, tetoppo, oppooppo);
+ if ((sign > 0.0) && (eps > 0.0)) {
+ if (iscospheric(tetdest, tetorg, tetapex, tetoppo, oppooppo, sign,
+ eps)) sign = 0.0;
+ }
+ if (sign > 0.0) {
+ if (flipqueue) {
+ enqueueflipface(tetraloop, flipqueue);
+ } else {
+ printf(" !! Non-locally Delaunay face (%d, %d, %d).\n",
+ pointmark(tetorg), pointmark(tetdest), pointmark(tetapex));
+ }
+ horrors++;
+ }
+ }
+ }
+ tetraloop.tet = tetrahedrontraverse();
+ }
+ if (flipqueue == (queue *) NULL) {
+ if (horrors == 0) {
+ if (!b->quiet) {
+ printf(" The mesh is %s.\n",
+ checksubfaces ? "constrained Delaunay" : "Delaunay");
+ }
+ } else {
+ printf(" !! !! !! !! %d obscenities viewed with horror.\n", horrors);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkdegeneracy() Check if the point set contains degeneracies. //
+// //
+// 'eps' is a relative error tolerance for testing approximatly degeneracies.//
+// Set it to zero if only exact test is desired. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::checkdegeneracy(REAL eps)
+{
+ triface tetraloop;
+ triface oppotet;
+ point tetorg, tetdest, tetapex, tetoppo;
+ point oppooppo;
+ REAL sign;
+ int horrors;
+
+ if (!b->quiet) {
+ printf(" Checking degeneracies in the point set...\n");
+ }
+ horrors = 0;
+ // Run through the list of triangles, checking each one.
+ tetrahedrons->traversalinit();
+ tetraloop.tet = tetrahedrontraverse();
+ while (tetraloop.tet != (tetrahedron *) NULL) {
+ // Check all four faces of the tetrahedron.
+ for (tetraloop.loc = 0; tetraloop.loc < 4; tetraloop.loc++) {
+ tetorg = org(tetraloop);
+ tetdest = dest(tetraloop);
+ tetapex = apex(tetraloop);
+ tetoppo = oppo(tetraloop);
+ sym(tetraloop, oppotet);
+ oppooppo = oppo(oppotet);
+ // Only do test if there is an adjoining tetrahedron whose pointer is
+ // larger (to ensure that each pair isn't tested twice).
+ if ((oppotet.tet != dummytet) && (tetoppo != (point) NULL) &&
+ (oppooppo != (point) NULL) && (tetraloop.tet < oppotet.tet)) {
+ sign = insphere(tetdest, tetorg, tetapex, tetoppo, oppooppo);
+ if ((sign != 0.0) && (eps > 0.0)) {
+ if (iscospheric(tetdest, tetorg, tetapex, tetoppo, oppooppo, sign,
+ eps)) sign = 0.0;
+ }
+ if (sign == 0.0) {
+ printf(" !! Degenerate set (%d, %d, %d, %d, %d).\n",
+ pointmark(tetorg), pointmark(tetdest), pointmark(tetapex),
+ pointmark(tetoppo), pointmark(oppooppo));
+ horrors++;
+ }
+ }
+ }
+ tetraloop.tet = tetrahedrontraverse();
+ }
+
+ if (horrors == 0) {
+ if (!b->quiet) {
+ printf(" The point set is non-degenerate.\n");
+ }
+ } else {
+ printf(" !! !! !! !! %d obscenities viewed with horror.\n", horrors);
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// checkconforming() Ensure that the mesh is conforming Delaunay. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::checkconforming()
+{
+ face segloop, shloop;
+ int encsubsegs, encsubfaces;
+
+ if (!b->quiet) {
+ printf(" Checking conforming Delaunay property of mesh...\n");
+ }
+ encsubsegs = encsubfaces = 0;
+ // Run through the list of subsegments, check each one.
+ subsegs->traversalinit();
+ segloop.sh = shellfacetraverse(subsegs);
+ while (segloop.sh != (shellface *) NULL) {
+ if (checkseg4encroach(&segloop, NULL, NULL, false)) {
+ printf(" !! !! Non-conforming subsegment: ");
+ printsh(&segloop);
+ encsubsegs++;
+ }
+ segloop.sh = shellfacetraverse(subsegs);
+ }
+ // Run through the list of subfaces, check each one.
+ subfaces->traversalinit();
+ shloop.sh = shellfacetraverse(subfaces);
+ while (shloop.sh != (shellface *) NULL) {
+ if (checksub4encroach(&shloop, NULL, false)) {
+ printf(" !! !! Non-conforming subface: ");
+ printsh(&shloop);
+ encsubfaces++;
+ }
+ shloop.sh = shellfacetraverse(subfaces);
+ }
+ if (encsubsegs == 0 && encsubfaces == 0) {
+ if (!b->quiet) {
+ printf(" The mesh is conforming Delaunay.\n");
+ }
+ } else {
+ if (encsubsegs > 0) {
+ printf(" !! !! %d subsegments are non-conforming.\n", encsubsegs);
+ }
+ if (encsubfaces > 0) {
+ printf(" !! !! %d subfaces are non-conforming.\n", encsubfaces);
+ }
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// qualitystatistics() Print statistics about the quality of the mesh. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::qualitystatistics()
+{
+ triface tetloop;
+ point p[4];
+ char sbuf[128];
+ REAL radiusratiotable[12];
+ REAL aspectratiotable[16];
+ REAL dx[6], dy[6], dz[6];
+ REAL edgelength[6];
+ REAL alldihed[6];
+ REAL cent[3];
+ REAL shortest, longest;
+ REAL smallestvolume, biggestvolume;
+ REAL smallestdiangle, biggestdiangle;
+ REAL tetvol;
+ REAL tetlongest2;
+ REAL minaltitude;
+ REAL cirradius, insradius;
+ REAL shortlen, longlen;
+ REAL tetaspect, tetradius;
+ REAL smalldiangle, bigdiangle;
+ int radiustable[12];
+ int aspecttable[16];
+ int dihedangletable[18];
+ int radiusindex;
+ int aspectindex;
+ int tendegree;
+ int i, j, k;
+
+ printf("Mesh quality statistics:\n\n");
+
+ radiusratiotable[0] = 0.707; radiusratiotable[1] = 1.0;
+ radiusratiotable[2] = 1.1; radiusratiotable[3] = 1.2;
+ radiusratiotable[4] = 1.4; radiusratiotable[5] = 1.6;
+ radiusratiotable[6] = 1.8; radiusratiotable[7] = 2.0;
+ radiusratiotable[8] = 2.5; radiusratiotable[9] = 3.0;
+ radiusratiotable[10] = 10.0; radiusratiotable[11] = 0.0;
+
+ aspectratiotable[0] = 1.5; aspectratiotable[1] = 2.0;
+ aspectratiotable[2] = 2.5; aspectratiotable[3] = 3.0;
+ aspectratiotable[4] = 4.0; aspectratiotable[5] = 6.0;
+ aspectratiotable[6] = 10.0; aspectratiotable[7] = 15.0;
+ aspectratiotable[8] = 25.0; aspectratiotable[9] = 50.0;
+ aspectratiotable[10] = 100.0; aspectratiotable[11] = 300.0;
+ aspectratiotable[12] = 1000.0; aspectratiotable[13] = 10000.0;
+ aspectratiotable[14] = 100000.0; aspectratiotable[15] = 0.0;
+
+ for (i = 0; i < 12; i++) {
+ radiustable[i] = 0;
+ }
+ for (i = 0; i < 16; i++) {
+ aspecttable[i] = 0;
+ }
+ for (i = 0; i < 18; i++) {
+ dihedangletable[i] = 0;
+ }
+
+ minaltitude = xmax - xmin + ymax - ymin + zmax - zmin;
+ minaltitude = minaltitude * minaltitude;
+ shortest = minaltitude;
+ longest = 0.0;
+ smallestvolume = minaltitude;
+ biggestvolume = 0.0;
+ smallestdiangle = 180.0;
+ biggestdiangle = 0.0;
+
+ // Loop all elements, calculate quality parameters for each element.
+ tetrahedrons->traversalinit();
+ tetloop.tet = tetrahedrontraverse();
+ while (tetloop.tet != (tetrahedron *) NULL) {
+ p[0] = org(tetloop);
+ p[1] = dest(tetloop);
+ p[2] = apex(tetloop);
+ p[3] = oppo(tetloop);
+ tetlongest2 = 0.0;
+
+ // Calculate the longest and shortest edge length.
+ for (i = 0; i < 3; i++) {
+ j = plus1mod3[i];
+ k = minus1mod3[i];
+ dx[i] = p[j][0] - p[k][0];
+ dy[i] = p[j][1] - p[k][1];
+ dz[i] = p[j][2] - p[k][2];
+ edgelength[i] = dx[i] * dx[i] + dy[i] * dy[i] + dz[i] * dz[i];
+ if (i == 0) {
+ shortlen = longlen = edgelength[i];
+ } else {
+ shortlen = edgelength[i] < shortlen ? edgelength[i] : shortlen;
+ longlen = edgelength[i] > longlen ? edgelength[i] : longlen;
+ }
+ if (edgelength[i] > tetlongest2) {
+ tetlongest2 = edgelength[i];
+ }
+ if (edgelength[i] > longest) {
+ longest = edgelength[i];
+ }
+ if (edgelength[i] < shortest) {
+ shortest = edgelength[i];
+ }
+ }
+ for (i = 3; i < 6; i++) {
+ j = i - 3;
+ k = 3;
+ dx[i] = p[j][0] - p[k][0];
+ dy[i] = p[j][1] - p[k][1];
+ dz[i] = p[j][2] - p[k][2];
+ edgelength[i] = dx[i] * dx[i] + dy[i] * dy[i] + dz[i] * dz[i];
+ shortlen = edgelength[i] < shortlen ? edgelength[i] : shortlen;
+ longlen = edgelength[i] > longlen ? edgelength[i] : longlen;
+ if (edgelength[i] > tetlongest2) {
+ tetlongest2 = edgelength[i];
+ }
+ if (edgelength[i] > longest) {
+ longest = edgelength[i];
+ }
+ if (edgelength[i] < shortest) {
+ shortest = edgelength[i];
+ }
+ }
+
+ // Calculate the largest and smallest volume.
+ tetvol = orient3d(p[0], p[1], p[2], p[3]) / 6.0;
+ if (tetvol < 0) tetvol = -tetvol;
+ if (tetvol < smallestvolume) {
+ smallestvolume = tetvol;
+ }
+ if (tetvol > biggestvolume) {
+ biggestvolume = tetvol;
+ }
+
+ // Calculate the largest and smallest dihedral angles.
+ tetalldihedral(p[0], p[1], p[2], p[3], alldihed);
+ for (i = 0; i < 6; i++) {
+ alldihed[i] = alldihed[i] * 180.0 / PI;
+ if (i == 0) {
+ smalldiangle = bigdiangle = alldihed[i];
+ } else {
+ smalldiangle = alldihed[i] < smalldiangle ? alldihed[i] : smalldiangle;
+ bigdiangle = alldihed[i] > bigdiangle ? alldihed[i] : bigdiangle;
+ }
+ if (alldihed[i] < smallestdiangle) {
+ smallestdiangle = alldihed[i];
+ } else if (alldihed[i] > biggestdiangle) {
+ biggestdiangle = alldihed[i];
+ }
+ }
+ tendegree = (int) (smalldiangle / 10.);
+ dihedangletable[tendegree]++;
+ tendegree = (int) (bigdiangle / 10.);
+ dihedangletable[tendegree]++;
+
+ // Calculate aspect ratio and radius-edge ratio for this element.
+ tetaspect = 0.0;
+ if (!circumsphere(p[0], p[1], p[2], p[3], cent, &cirradius)) {
+ // ! Very bad element.
+ tetaspect = 1.e+8;
+ tetradius = 100.0;
+ } else {
+ inscribedsphere(p[0], p[1], p[2], p[3], cent, &insradius);
+ }
+ if (tetaspect == 0.0) {
+ tetradius = cirradius / sqrt(shortlen);
+ tetaspect = sqrt(longlen) / (2.0 * insradius);
+
+ }
+ aspectindex = 0;
+ while ((tetaspect > aspectratiotable[aspectindex]) && (aspectindex < 15)) {
+ aspectindex++;
+ }
+ aspecttable[aspectindex]++;
+ radiusindex = 0;
+ while ((tetradius > radiusratiotable[radiusindex]) && (radiusindex < 11)) {
+ radiusindex++;
+ }
+ radiustable[radiusindex]++;
+
+ tetloop.tet = tetrahedrontraverse();
+ }
+
+ shortest = sqrt(shortest);
+ longest = sqrt(longest);
+ minaltitude = sqrt(minaltitude);
+
+ printf(" Smallest volume: %16.5g | Largest volume: %16.5g\n",
+ smallestvolume, biggestvolume);
+ printf(" Shortest edge: %16.5g | Longest edge: %16.5g\n",
+ shortest, longest);
+ sprintf(sbuf, "%.17g", biggestdiangle);
+ if (strlen(sbuf) > 8) {
+ sbuf[8] = '\0';
+ }
+ printf(" Smallest dihedral: %14.5g | Largest dihedral: %s\n\n",
+ smallestdiangle, sbuf);
+
+ printf(" Radius-edge ratio histogram:\n");
+ printf(" < %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
+ radiusratiotable[0], radiustable[0], radiusratiotable[5],
+ radiusratiotable[6], radiustable[6]);
+ for (i = 1; i < 5; i++) {
+ printf(" %6.6g - %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
+ radiusratiotable[i - 1], radiusratiotable[i], radiustable[i],
+ radiusratiotable[i + 5], radiusratiotable[i + 6],
+ radiustable[i + 6]);
+ }
+ printf(" %6.6g - %-6.6g : %8d | %6.6g - : %8d\n",
+ radiusratiotable[4], radiusratiotable[5], radiustable[5],
+ radiusratiotable[10], radiustable[11]);
+ printf(" (A tetrahedron's radius-edge ratio is its radius of ");
+ printf("circumsphere divided\n");
+ printf(" by its shortest edge length)\n\n");
+
+ printf(" Aspect ratio histogram:\n");
+ printf(" 1.1547 - %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
+ aspectratiotable[0], aspecttable[0], aspectratiotable[7],
+ aspectratiotable[8], aspecttable[8]);
+ for (i = 1; i < 7; i++) {
+ printf(" %6.6g - %-6.6g : %8d | %6.6g - %-6.6g : %8d\n",
+ aspectratiotable[i - 1], aspectratiotable[i], aspecttable[i],
+ aspectratiotable[i + 7], aspectratiotable[i + 8],
+ aspecttable[i + 8]);
+ }
+ printf(" %6.6g - %-6.6g : %8d | %6.6g - : %8d\n",
+ aspectratiotable[6], aspectratiotable[7], aspecttable[7],
+ aspectratiotable[14], aspecttable[15]);
+ printf(" (A tetrahedron's aspect ratio is its longest edge length");
+ printf(" divided by the\n");
+ printf(" diameter of its inscribed sphere)\n\n");
+
+ printf(" Dihedral Angle histogram:\n");
+ for (i = 0; i < 9; i++) {
+ printf(" %3d - %2d degrees: %8d | %3d - %3d degrees: %8d\n",
+ i * 10, i * 10 + 10, dihedangletable[i],
+ i * 10 + 90, i * 10 + 100, dihedangletable[i + 9]);
+ }
+ printf("\n");
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// statistics() Print all sorts of cool facts. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetgenmesh::statistics()
+{
+ printf("\nStatistics:\n\n");
+ printf(" Input points: %d\n", in->numberofpoints);
+ if (b->refine) {
+ printf(" Input tetrahedra: %d\n", in->numberoftetrahedra);
+ }
+ if (b->plc) {
+ printf(" Input facets: %d\n", in->numberoffacets);
+ printf(" Input holes: %d\n", in->numberofholes);
+ printf(" Input regions: %d\n", in->numberofregions);
+ }
+
+ printf("\n Mesh points: %ld\n", points->items);
+ printf(" Mesh tetrahedra: %ld\n", tetrahedrons->items);
+ if (b->plc || b->refine) {
+ printf(" Mesh faces: %ld\n", (4l * tetrahedrons->items + hullsize) / 2l);
+ }
+ if (b->plc || b->refine) {
+ printf(" Mesh subfaces: %ld\n", subfaces->items);
+ printf(" Mesh subsegments: %ld\n\n", subsegs->items);
+ } else {
+ printf(" Convex hull faces: %ld\n\n", hullsize);
+ }
+ if (b->verbose) {
+ // if (b->quality) {
+ qualitystatistics();
+ // }
+ printf("\n");
+ }
+}
+
+//
+// End of user interaction routines
+//
+
+//
+// Begin of constructor and destructor of tetgenmesh
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// ~tetgenmesh() Deallocte memory occupied by a tetgenmesh object. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::~tetgenmesh()
+{
+ in = (tetgenio *) NULL;
+ b = (tetgenbehavior *) NULL;
+
+ if (tetrahedrons != (memorypool *) NULL) {
+ delete tetrahedrons;
+ }
+ if (subfaces != (memorypool *) NULL) {
+ delete subfaces;
+ }
+ if (subsegs != (memorypool *) NULL) {
+ delete subsegs;
+ }
+ if (points != (memorypool *) NULL) {
+ delete points;
+ }
+ if (dummytetbase != (tetrahedron *) NULL) {
+ delete [] dummytetbase;
+ }
+ if (dummyshbase != (shellface *) NULL) {
+ delete [] dummyshbase;
+ }
+ if (liftpointarray != (REAL *) NULL) {
+ delete [] liftpointarray;
+ }
+ if (highordertable != (point *) NULL) {
+ delete [] highordertable;
+ }
+ if (subpbcgrouptable != (pbcdata *) NULL) {
+ delete [] subpbcgrouptable;
+ }
+ if (segpbcgrouptable != (list *) NULL) {
+ delete segpbcgrouptable;
+ delete [] idx2segpglist;
+ delete [] segpglist;
+ }
+}
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetgenmesh() Initialize a tetgenmesh object. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+tetgenmesh::tetgenmesh()
+{
+ in = (tetgenio *) NULL;
+ b = (tetgenbehavior *) NULL;
+
+ tetrahedrons = (memorypool *) NULL;
+ subfaces = (memorypool *) NULL;
+ subsegs = (memorypool *) NULL;
+ points = (memorypool *) NULL;
+ badsubsegs = (memorypool *) NULL;
+ badsubfaces = (memorypool *) NULL;
+ badtetrahedrons = (memorypool *) NULL;
+ flipstackers = (memorypool *) NULL;
+
+ dummytet = (tetrahedron *) NULL;
+ dummytetbase = (tetrahedron *) NULL;
+ dummysh = (shellface *) NULL;
+ dummyshbase = (shellface *) NULL;
+
+ liftpointarray = (REAL *) NULL;
+ highordertable = (point *) NULL;
+ subpbcgrouptable = (pbcdata *) NULL;
+ segpbcgrouptable = (list *) NULL;
+ idx2segpglist = (int *) NULL;
+ segpglist = (int *) NULL;
+
+ xmax = xmin = ymax = ymin = zmax = zmin = 0.0;
+ longest = 0.0;
+ hullsize = 0l;
+ insegment = 0l;
+ edgeboundindex = 0;
+ pointmarkindex = 0;
+ point2simindex = 0;
+ point2pbcptindex = 0;
+ highorderindex = 0;
+ elemattribindex = 0;
+ volumeboundindex = 0;
+ shmarkindex = 0;
+ areaboundindex = 0;
+ checksubfaces = 0;
+ checkpbcs = 0;
+ varconstraint = 0;
+ nonconvex = 0;
+ dupverts = 0;
+ unuverts = 0;
+ samples = 0l;
+ randomseed = 0l;
+ macheps = 0.0;
+ maxcavfaces = maxcavverts = 0;
+ enlcavtimes = 0;
+ flip23s = flip32s = flip22s = flip44s = 0l;
+}
+
+//
+// End of constructor and destructor of tetgenmesh
+//
+
+//
+// End of class 'tetgenmesh' implementation.
+//
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetrahedralize() The interface for users using TetGen library to //
+// generate tetrahedral meshes with all features. //
+// //
+// The sequence is roughly as follows. Many of these steps can be skipped, //
+// depending on the command line switches. //
+// //
+// - Initialize constants and parse the command line. //
+// - Read the vertices from a file and either //
+// - tetrahedralize them (no -r), or //
+// - read an old mesh from files and reconstruct it (-r). //
+// - Insert the PLC segments and facets (-p). //
+// - Read the holes (-p), regional attributes (-pA), and regional volume //
+// constraints (-pa). Carve the holes and concavities, and spread the //
+// regional attributes and volume constraints. //
+// - Enforce the constraints on minimum quality bound (-q) and maximum //
+// volume (-a). Also enforce the conforming Delaunay property (-q and -a). //
+// - Promote the mesh's linear tetrahedra to higher order elements (-o). //
+// - Write the output files and print the statistics. //
+// - Check the consistency and Delaunay property of the mesh (-C). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+#include <time.h> // Defined type clock_t, constant CLOCKS_PER_SEC.
+
+void tetrahedralize(tetgenbehavior *b, tetgenio *in, tetgenio *out)
+{
+ tetgenmesh m;
+ clock_t tv0, tv1, tv2, tv3, tv4, tv5, tv6, tv7, tv8;
+
+ if (!b->quiet) {
+ tv0 = clock();
+ }
+
+ m.b = b;
+ m.in = in;
+
+ m.macheps = exactinit();
+ m.initializepools();
+ m.steinerleft = b->steiner;
+
+ if (!b->quiet) {
+ tv1 = clock();
+ }
+
+ m.transfernodes();
+ if (b->refine) {
+ m.reconstructmesh();
+ } else {
+ m.incrflipdelaunay();
+ }
+
+ if (!b->quiet) {
+ tv2 = clock();
+ if (b->refine) {
+ printf("Mesh reconstruction seconds: %g\n",
+ (tv2 - tv1) / (REAL) CLOCKS_PER_SEC);
+ } else if (!b->detectinter) {
+ printf("Delaunay seconds: %g\n", (tv2 - tv1) / (REAL) CLOCKS_PER_SEC);
+ }
+ }
+
+ if (b->useshelles && !b->refine) {
+ m.insegment = m.meshsurface();
+ if (b->detectinter) {
+ m.detectinterfaces();
+ } else {
+ if (!b->nobisect) {
+ m.incrperturbvertices(0.0);
+ m.delaunizesegments();
+ m.constrainedfacets();
+ }
+ }
+ }
+
+ if (!b->quiet) {
+ tv3 = clock();
+ if (b->useshelles && !b->refine) {
+ if (b->detectinter) {
+ printf("Intersection seconds: %g\n",
+ (tv3 - tv2) / (REAL) CLOCKS_PER_SEC);
+ } else {
+ if (!b->nobisect) {
+ printf("Segment and facet seconds: %g\n",
+ (tv3 - tv2) / (REAL) CLOCKS_PER_SEC);
+ }
+ }
+ }
+ }
+
+ if (b->plc && !b->refine && !b->detectinter) {
+ m.carveholes();
+ }
+
+ if (!b->quiet) {
+ tv4 = clock();
+ if (b->plc && !b->refine && !b->detectinter) {
+ printf("Hole seconds: %g\n", (tv4 - tv3) / (REAL) CLOCKS_PER_SEC);
+ }
+ }
+
+ if ((b->plc || b->refine) && !b->detectinter) {
+ m.repairdegetets();
+ }
+
+ if (!b->quiet) {
+ tv5 = clock();
+ if ((b->plc || b->refine) && !b->detectinter) {
+ printf("Repair seconds: %g\n", (tv5 - tv4) / (REAL) CLOCKS_PER_SEC);
+ }
+ }
+
+ if (b->insertaddpoints) {
+ if (in->numberofaddpoints == 0) {
+ in->load_addnodes(b->infilename);
+ }
+ if (in->numberofaddpoints > 0) {
+ m.insertaddpoints();
+ }
+ }
+
+ if (!b->quiet) {
+ tv6 = clock();
+ if ((b->plc || b->refine) && (in->numberofaddpoints > 0)) {
+ printf("Add points seconds: %g\n", (tv6 - tv5) / (REAL) CLOCKS_PER_SEC);
+ }
+ }
+
+ if (b->quality && (m.tetrahedrons->items > 0)) {
+ m.enforcequality();
+ }
+
+ if (!b->quiet) {
+ tv7 = clock();
+ if (b->quality && (m.tetrahedrons->items > 0)) {
+ printf("Quality seconds: %g\n", (tv7 - tv6) / (REAL) CLOCKS_PER_SEC);
+ }
+ }
+
+ if ((m.dupverts > 0) || (m.unuverts > 0)) {
+ m.jettisonnodes();
+ }
+
+ if (b->order > 1) {
+ m.highorder();
+ }
+
+ if (!b->quiet) {
+ printf("\n");
+ }
+
+ if (out != (tetgenio *) NULL) {
+ out->firstnumber = in->firstnumber;
+ out->mesh_dim = in->mesh_dim;
+ }
+
+ if (b->nonodewritten || b->noiterationnum) {
+ if (!b->quiet) {
+ printf("NOT writing a .node file.\n");
+ }
+ } else {
+ if (b->detectinter) {
+ if (m.subfaces->items > 0l) {
+ // Only output when there are intersecting faces.
+ m.outnodes(out);
+ }
+ } else {
+ m.outnodes(out);
+ }
+ }
+
+ if (b->noelewritten) {
+ if (!b->quiet) {
+ printf("NOT writing an .ele file.\n");
+ }
+ } else {
+ if (!b->detectinter) {
+ if (m.tetrahedrons->items > 0l) {
+ m.outelements(out);
+ }
+ }
+ }
+
+ if (b->nofacewritten) {
+ if (!b->quiet) {
+ printf("NOT writing an .face file.\n");
+ }
+ } else {
+ if (b->facesout) {
+ if (m.tetrahedrons->items > 0l) {
+ // Output all faces.
+ m.outfaces(out);
+ }
+ } else {
+ if (b->detectinter) {
+ if (m.subfaces->items > 0l) {
+ // Only output when there are intersecting faces.
+ m.outsubfaces(out);
+ }
+ } else if (b->plc || b->refine) {
+ if (m.tetrahedrons->items > 0l) {
+ // Output boundary faces.
+ m.outsubfaces(out);
+ }
+ } else {
+ if (m.tetrahedrons->items > 0l) {
+ // Output convex hull faces.
+ m.outhullfaces(out);
+ }
+ }
+ }
+ }
+
+ if (m.checkpbcs) {
+ m.outpbcnodes(out);
+ }
+
+ if (b->edgesout && b->plc) {
+ m.outsubsegments(out);
+ }
+
+ if (!out && b->plc && ((b->object == tetgenbehavior::OFF) ||
+ (b->object == tetgenbehavior::PLY) ||
+ (b->object == tetgenbehavior::STL))) {
+ m.outsmesh(b->outfilename);
+ }
+
+ if (!out && b->meditview) {
+ m.outmesh2medit(b->outfilename);
+ }
+
+ if (!out && b->gidview) {
+ m.outmesh2gid(b->outfilename);
+ }
+
+ if (!out && b->geomview) {
+ m.outmesh2off(b->outfilename);
+ }
+
+ if (b->neighout) {
+ m.outneighbors(out);
+ }
+
+ if (!b->quiet) {
+ tv8 = clock();
+ printf("\nOutput seconds: %g\n", (tv8 - tv7) / (REAL) CLOCKS_PER_SEC);
+ printf("Total running seconds: %g\n",
+ (tv8 - tv0) / (REAL) CLOCKS_PER_SEC);
+ }
+
+ if (b->docheck) {
+ m.checkmesh();
+ if (m.checksubfaces) {
+ m.checkshells();
+ }
+ if (b->docheck > 1) {
+ m.checkdelaunay(b->epsilon, NULL);
+ if (b->docheck > 2) {
+ if (b->quality || b->refine) {
+ m.checkconforming();
+ }
+ }
+ }
+ }
+
+ if (!b->quiet) {
+ m.statistics();
+ }
+}
+
+#ifndef TETLIBRARY
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// main() The entrance for running TetGen from command line. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+int main(int argc, char *argv[])
+
+#else // with TETLIBRARY
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetrahedralize() The entrance for calling TetGen from another program. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetrahedralize(char *switches, tetgenio *in, tetgenio *out)
+
+#endif // not TETLIBRARY
+
+{
+ tetgenbehavior b;
+
+#ifndef TETLIBRARY
+
+ tetgenio in;
+
+ if (!b.parse_commandline(argc, argv)) {
+ exit(1);
+ }
+ if (b.refine) {
+ if (!in.load_tetmesh(b.infilename)) {
+ exit(1);
+ }
+ } else {
+ if (!in.load_plc(b.infilename, (int) b.object)) {
+ exit(1);
+ }
+ }
+ tetrahedralize(&b, &in, NULL);
+
+ return 0;
+
+#else // with TETLIBRARY
+
+ if (!b.parse_commandline(switches)) {
+ exit(1);
+ }
+ tetrahedralize(&b, in, out);
+
+#endif // not TETLIBRARY
+}
diff --git a/contrib/Tetgen/tetgen.h b/contrib/Tetgen/tetgen.h
index cbe84252e85f3d6d1e7679d7af3da343644587cb..e67f87d14a42fc09d7447a7f529cba6e981bd2e9 100644
--- a/contrib/Tetgen/tetgen.h
+++ b/contrib/Tetgen/tetgen.h
@@ -1,1764 +1,1818 @@
-///////////////////////////////////////////////////////////////////////////////
-// //
-// TetGen //
-// //
-// A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator //
-// //
-// Version 1.3 //
-// June 13, 2004 //
-// //
-// Copyright 2002, 2004 //
-// Hang Si //
-// Rathausstr. 9, 10178 Berlin, Germany //
-// si@wias-berlin.de //
-// //
-// You can obtain TetGen via internet: http://tetgen.berlios.de. It may be //
-// freely copied, modified, and redistributed under the copyright notices //
-// given in the file LICENSE. //
-// //
-// TetGen is a program for generating quality tetrahedral meshes and three- //
-// dimensional Delaunay triangulations. It currently computes exact //
-// Delaunay tetrahedralizations, constrained Delaunay tetrahedralizations, //
-// and quality tetrahedral meshes. The latter are nicely graded and whose //
-// tetrahedra have radius-edge ratio bounded, and are conforming Delaunay //
-// if there are no input angles smaller than 60 degree. //
-// //
-// TetGen incorporates a suit of geometrical and mesh generation algorithms. //
-// A brief description of these algorithms used in TetGen can be found in //
-// the first section of the user's manual. References are given for users //
-// who are interesting in these approaches. However, the main references //
-// are listed below: //
-// //
-// The efficient Delaunay tetrahedralization algorithm is: H. Edelsbrunner //
-// and N. R. Shah, "Incremental Topological Flipping Works for Regular //
-// Triangulations". Algorithmica 15: 223-241, 1996. //
-// //
-// The constrained Delaunay tetrahedralization algorithm is described in: //
-// H. Si and K. Gaertner, "An Algorithm for Three-Dimensional Constrained //
-// Delaunay Triangles". Proceedings of the 4th International Conference on //
-// Engineering Computational Technology, Lisbon, September 2004. //
-// //
-// The Delaunay refinement algorithm is from: J. R. Shewchuk, "Tetrahedral //
-// Mesh Generation by Delaunay Refinement". Proceedings of the 14th Annual //
-// Symposium on Computational Geometry, pages 86-95, 1998. //
-// //
-// The mesh data structure of TetGen is a combination of two types of mesh //
-// data structures. The tetrahedron-based mesh data structure introduced //
-// by Shewchuk is eligible to implement algorithms of generating Delaunay //
-// tetrahedralizations. However, constrained Delaunay tetrahedralization //
-// and quality mesh generation algorithms require other mesh elements //
-// (subfaces, subsegments) be handled at the same time. The triangle-edge //
-// data structure from Muecke is adopted for this purpose. Handling //
-// these data types together is through a set of fast mesh manipulation //
-// primitives. References of these two data structures are found below: //
-// //
-// J. R. Shewchuk, "Delaunay Refinement Mesh Generation". PhD thesis, //
-// Carnegie Mellon University, 1997. //
-// //
-// E. P. Muecke, "Shapes and Implementations in Three-Dimensional //
-// Geometry". PhD thesis, Univ. of Illinois, Urbana, Illinois, 1993. //
-// //
-// The research of mesh generation is definitly on the move. A lot of state- //
-// of-the-art algorithms need to be implemented and evaluated. I heartily //
-// welcome new algorithms especially for quality conforming Delaunay mesh //
-// generation and anisotropic conforming Delaunay mesh generation. If you //
-// have any idea on new approaches, please please kindly let me know. //
-// //
-// TetGen is supported by the "pdelib" project of Weierstrass Institute for //
-// Applied Analysis and Stochastics (WIAS) in Berlin. It is a collection //
-// of software components for solving non-linear partial differential //
-// equations including 2D and 3D mesh generators, sparse matrix solvers, //
-// and scientific visualization tools, etc. For more information please //
-// see: http://www.wias-berlin.de/software/pdelib. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetgen.h //
-// //
-// Header file of the TetGen library. Also is the user-level header file. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// TetGen Library Overview //
-// //
-// TetGen library is comprised by several data types and global functions. //
-// //
-// If you quickly go through this file, you will find there are only three //
-// main data types defined, which are "tetgenio", "tetgenbehavior", and //
-// "tetgenmesh". Tetgenio is used to pass data into and out of mesh routines //
-// of the library; tetgenbehavior sets the command line options selected by //
-// user and thus controls the behaviors of TetGen; tetgenmesh, the biggest //
-// data type I've ever defined, contains everything for creating Delaunay //
-// tetrahedralizations and tetrahedral meshes. These data types are defined //
-// as C++ classes. //
-// //
-// There are few global functions as well. "tetrahedralize()" is the (only) //
-// user interface for calling TetGen from other programs. Two functions //
-// "orient3d()" and "insphere()" are incorporated from a public C code for //
-// performing exact geometrical tests. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-#ifndef tetgenH
-#define tetgenH
-
-// To compile TetGen as a library (e.g. libtet.a) but not as an executable
-// program, define the TETLIBRARY symbol. The library of TetGen can be
-// linked with programs which want to call TetGen as a function.
-
-// #define TETLIBRARY
-
-// Uncomment the following line to disable assert macros. These macros are
-// inserted in places where I hope to catch bugs. Somewhat, they slow down
-// the speed of TetGen. They can be ignored by adding the -DNDEBUG
-// compiler switch or uncomment the following line
-
-// #define NDEBUG
-
-// To insert lots of self-checks for internal errors, define the SELF_CHECK
-// symbol. This will slow down the program significantly.
-
-// #define SELF_CHECK
-
-// For single precision ( which will save some memory and reduce paging ),
-// define the symbol SINGLE by using the -DSINGLE compiler switch or by
-// writing "#define SINGLE" below.
-//
-// For double precision ( which will allow you to refine meshes to a smaller
-// edge length), leave SINGLE undefined.
-
-// #define SINGLE
-
-#ifdef SINGLE
- #define REAL float
-#else
- #define REAL double
-#endif // not defined SINGLE
-
-// Here is the most general used head files for all C/C++ codes
-
-#include <stdio.h> // Standard IO: FILE, NULL, EOF, printf(), ...
-#include <stdlib.h> // Standard lib: abort(), system(), getenv(), ...
-#include <string.h> // String lib: strcpy(), strcat(), strcmp(), ...
-#include <math.h> // Math lib: sin(), sqrt(), pow(), ...
-#include <assert.h>
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The tetgenio data type //
-// //
-// Used to pass data into and out of the library of TetGen. //
-// //
-// If you want to program with the library of TetGen, it's necessary for you //
-// to understand the tetgenio data type, while the other two data types can //
-// be hidden through calling the global function "tetrahedralize()". As you //
-// will see below, that basically tetgenio is nothing more than a collection //
-// of arrays. These arrays are used to store points, tetrahedra, (triangular)//
-// faces, boundary markers, and so forth. They are used to describe data in //
-// input & output files of TetGen. If you understand TetGen's file formats, //
-// then it is straighforward for you to understand these arrays. The file //
-// formats of TetGen are described in the third section of the user's manual.//
-// //
-// Once you create an object of tetgenio, all arrays are initialized to NULL.//
-// This is done by routine "initialize()", it is automatically called by the //
-// constructor. Before you set data into these arrays, you need to allocate //
-// enough memory for them. After you use the object, you need to clear the //
-// memory occupied by these arrays. Routine "deinitialize()" will be auto- //
-// matically called on deletion of the object. It will clear the memory in //
-// each array if it is not a NULL. However, it assumes that the memory is //
-// allocated by C++ operator 'new'. If you use malloc() to allocate memory, //
-// you should free them yourself, after they're freed, call "initialize()" //
-// once to disable "deinitialize()". //
-// //
-// In all cases, the first item in any array is stored starting at index [0].//
-// However, that item is item number `firstnumber' which may be '0' or '1'. //
-// Be sure to set the 'firstnumber' be '1' if your indices pointing into the //
-// pointlist is starting from '1'. Default, it is initialized be '0'. //
-// //
-// Tetgenio also contains routines for reading and writing TetGen's files as //
-// well. Both the library of TetGen and TetView use these routines to parse //
-// input files, i.e., .node, .poly, .smesh, .ele, .face, and .edge files. //
-// Other routines are provided mainly for debugging purpose. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-class tetgenio {
-
- public:
-
- // Maximum number of characters in a file name (including the null).
- enum {FILENAMESIZE = 1024};
-
- // Maxi. numbers of chars in a line read from a file (incl. the null).
- enum {INPUTLINESIZE = 1024};
-
- // The polygon data structure. A "polygon" is a planar polygon. It can
- // be arbitrary shaped (convex or non-convex) and bounded by non-
- // crossing segments, i.e., the number of vertices it has indictes the
- // same number of edges.
- // 'vertexlist' is a list of vertex indices (integers), its length is
- // indicated by 'numberofvertices'. The vertex indices are odered in
- // either counterclockwise or clockwise way.
- typedef struct {
- int *vertexlist;
- int numberofvertices;
- } polygon;
-
- static void init(polygon* p) {
- p->vertexlist = (int *) NULL;
- p->numberofvertices = 0;
- }
-
- // The facet data structure. A "facet" is a planar facet. It is used
- // to represent a planar straight line graph (PSLG) in two dimension.
- // A PSLG contains a list of polygons. It also may conatin holes in it,
- // indicated by a list of hole points (their coordinates).
- typedef struct {
- polygon *polygonlist;
- int numberofpolygons;
- REAL *holelist;
- int numberofholes;
- } facet;
-
- static void init(facet* f) {
- f->polygonlist = (polygon *) NULL;
- f->numberofpolygons = 0;
- f->holelist = (REAL *) NULL;
- f->numberofholes = 0;
- }
-
- public:
-
- // Items are numbered starting from 'firstnumber' (0 or 1), default is 0.
- int firstnumber;
-
- // Dimension of the mesh (2 or 3), default is 3.
- int mesh_dim;
-
- // `pointlist': An array of point coordinates. The first point's x
- // coordinate is at index [0] and its y coordinate at index [1], its
- // z coordinate is at index [2], followed by the coordinates of the
- // remaining points. Each point occupies three REALs.
- // `pointattributelist': An array of point attributes. Each point's
- // attributes occupy `numberofpointattributes' REALs.
- // 'addpointlist': An array of additional point coordinates.
- // `pointmarkerlist': An array of point markers; one int per point.
- REAL *pointlist;
- REAL *pointattributelist;
- REAL *addpointlist;
- int *pointmarkerlist;
- int numberofpoints;
- int numberofpointattributes;
- int numberofaddpoints;
-
- // `elementlist': An array of element (triangle or tetrahedron) corners.
- // The first element's first corner is at index [0], followed by its
- // other corners in counterclockwise order, followed by any other
- // nodes if the element represents a nonlinear element. Each element
- // occupies `numberofcorners' ints.
- // `elementattributelist': An array of element attributes. Each
- // element's attributes occupy `numberofelementattributes' REALs.
- // `elementconstraintlist': An array of constraints, i.e. triangle's
- // area or tetrahedron's volume; one REAL per element. Input only.
- // `neighborlist': An array of element neighbors; 3 or 4 ints per
- // element. Output only.
- int *tetrahedronlist;
- REAL *tetrahedronattributelist;
- REAL *tetrahedronvolumelist;
- int *neighborlist;
- int numberoftetrahedra;
- int numberofcorners;
- int numberoftetrahedronattributes;
-
- // `facetlist': An array of facets. Each entry is a structure of facet.
- // `facetmarkerlist': An array of facet markers; one int per facet.
- facet *facetlist;
- int *facetmarkerlist;
- int numberoffacets;
-
- // `holelist': An array of holes. The first hole's x, y and z
- // coordinates are at indices [0], [1] and [2], followed by the
- // remaining holes. Three REALs per hole.
- REAL *holelist;
- int numberofholes;
-
- // `regionlist': An array of regional attributes and area or volume
- // constraints. The first constraint's x, y and z coordinates are at
- // indices [0], [1] and [2], followed by the regional attribute and
- // index [3], followed by the maximum area or volume at index [4],
- // followed by the remaining area or volume constraints. Five REALs
- // per constraint.
- // Note that each regional attribute is used only if you select the `A'
- // switch, and each constraint is used only if you select the `a'
- // switch (with no number following), but omitting one of these
- // switches does not change the memory layout.
- REAL *regionlist;
- int numberofregions;
-
- // `trifacelist': An array of triangular face endpoints. The first
- // face's endpoints are at indices [0], [1] and [2], followed by the
- // remaining faces. Three ints per face.
- // `trifacemarkerlist': An array of face markers; one int per face.
- int *trifacelist;
- int *trifacemarkerlist;
- int numberoftrifaces;
-
- // `edgelist': An array of edge endpoints. The first edge's endpoints
- // are at indices [0] and [1], followed by the remaining edges. Two
- // ints per edge.
- // `edgemarkerlist': An array of edge markers; one int per edge.
- int *edgelist;
- int *edgemarkerlist;
- int numberofedges;
-
- public:
-
- // Initialize routine.
- void initialize();
- void deinitialize();
-
- // Input & output routines.
- bool load_node_call(FILE* infile, int markers, char* nodefilename);
- bool load_node(char* filename);
- bool load_addnodes(char* filename);
- bool load_poly(char* filename);
- bool load_off(char* filename);
- bool load_ply(char* filename);
- bool load_stl(char* filename);
- bool load_medit(char* filename);
- bool load_plc(char* filename, int object);
- bool load_tetmesh(char* filename);
- void save_nodes(char* filename);
- void save_elements(char* filename);
- void save_faces(char* filename);
- void save_edges(char* filename);
- void save_neighbors(char* filename);
- void save_poly(char* filename);
-
- // Read line and parse string functions.
- char *readline(char* string, FILE* infile, int *linenumber);
- char *findnextfield(char* string);
- char *readnumberline(char* string, FILE* infile, char* infilename);
- char *findnextnumber(char* string);
-
- // Constructor and destructor.
- tetgenio() {initialize();}
- ~tetgenio() {deinitialize();}
-};
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The tetgenbehavior data type //
-// //
-// Used to parse command line switches and file names. //
-// //
-// It includes a list of variables corresponding to the commandline switches //
-// for control the behavior of TetGen. These varibales are all initialized //
-// to their default values. //
-// //
-// Routine "parse_commandline()" defined in this data type is used to change //
-// the vaules of the variables. This routine accepts the standard parameters //
-// ('argc' and 'argv') that pass to C/C++ main() function. It also accepts a //
-// string which contains the command line options. //
-// //
-// You don't need to understand this data type. It can be implicitly called //
-// by the global function "tetrahedralize()" defined below. The necessary //
-// thing you need to know is the meaning of command line switches of TetGen. //
-// They are described in the third section of the user's manual. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-class tetgenbehavior {
-
- public:
-
- // Labels define the objects which are acceptable by TetGen. They are
- // recoggnized from the extensions of the input filenames.
- // - NODES, a list of nodes (.node);
- // - POLY, a piecewise linear complex (.poly or .smesh);
- // - OFF, a polyhedron (.off, Geomview's file format);
- // - PLY, a polyhedron (.ply, file format from gatech);
- // - STL, a surface mesh (.stl, stereolithography format);
- // - MEDIT, a surface mesh (.mesh, Medit's file format);
- // - MESH, a tetrahedral mesh (.ele).
- // If no extension is available, the imposed commandline switch
- // (-p or -r) implies the object.
-
- enum objecttype {NONE, NODES, POLY, OFF, PLY, STL, MEDIT, MESH};
-
- // Variables of command line switches. After each variable are the
- // corresponding switch and its default value. Read the user's manul
- // or online instructions to find out the meaning of these switches.
-
- int plc; // '-p' switch, 0.
- int refine; // '-r' switch, 0.
- int quality; // '-q' switch, 0.
- REAL minratio; // number after '-q' switch, 2.0.
- REAL goodratio; // number calculated from 'minratio', 0.0.
- REAL minangle; // minimum angle bound, 20.0.
- REAL goodangle; // cosine squared of minangle, 0.0.
- int varvolume; // '-a' switch without number, 0.
- int fixedvolume; // '-a' switch with number, 0.
- REAL maxvolume; // number after '-a' switch, -1.0.
- int removesliver; // '-s' switch, 0.
- REAL maxdihedral; // number after '-s' switch, 0.0.
- int insertaddpoints; // '-i' switch, 0.
- int regionattrib; // '-A' switch, 0.
- REAL epsilon; // number after '-T' switch, 1.0e-8.
- int nomerge; // not merge two coplanar facets, '-M' switch, 0.
- int detectinter; // '-d' switch, 0.
- int checkclosure; // '-c' switch, 0.
- int zeroindex; // '-z' switch, 0.
- int jettison; // '-j' switch, 0.
- int order; // element order, specified after '-o' switch, 1.
- int facesout; // '-f' switch, 0.
- int edgesout; // '-e' switch, 0.
- int neighout; // '-n' switch, 0.
- int meditview; // '-g' switch, 0.
- int gidview; // '-G' switch, 0.
- int geomview; // '-O' switch, 0.
- int nobound; // '-B' switch, 0.
- int nonodewritten; // '-N' switch, 0.
- int noelewritten; // '-E' switch, 0.
- int nofacewritten; // '-F' switch, 0.
- int noiterationnum; // '-I' switch, 0.
- int nobisect; // count of how often '-Y' switch is selected, 0.
- int noflip; // do not perform flips. '-Y' switch. 0.
- int steiner; // number after '-S' switch. 0.
- int dopermute; // do permutation. '-P' switch, 0.
- int srandseed; // number of a random seed after '-P' switch, 1.
- int docheck; // '-C' switch, 0.
- int quiet; // '-Q' switch, 0.
- int verbose; // count of how often '-V' switch is selected, 0.
- int useshelles; // '-p', '-r', '-q', 'd', or 'c' switch, 0.
- enum objecttype object; // determined by -p, or -r switch. NONE.
-
- // Variables used to save command line switches and in/out file names.
- char commandline[1024];
- char infilename[1024];
- char outfilename[1024];
-
- // Default initialize and de-initialize functions.
- tetgenbehavior();
- ~tetgenbehavior() {}
-
- void versioninfo();
- void syntax();
- void usage();
-
- // Command line parse routine.
- bool parse_commandline(int argc, char **argv);
- bool parse_commandline(char *switches) {
- return parse_commandline(0, &switches);
- }
-};
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Geometric predicates //
-// //
-// TetGen uses two basic geometric predicates, which are orientation test, //
-// and locally Delaunay test (insphere test). //
-// //
-// Orientation test: let a, b, c be a sequence of 3 points in R^3 and are //
-// not collinear, there exists a unique plane H passes through them. Let H+ //
-// H- be the two spaces separated by H, which are defined as follows (using //
-// left-hand rule): make a fist using your left hand in such a way that your //
-// fingers follow the order of a, b and c, then your thumb is pointing to H+.//
-// The orientation test is to determine whether another point d lies in H+ //
-// (also say that d has positive orientation), or in H- (also say that d has //
-// negative orientation), or on H (zero orientation). //
-// //
-// Locally Delaunay test (insphere test): let a, b, c, d be 4 points in R^3 //
-// and are not coplanar, there exists a unique circumsphere S passes through //
-// these 4 points. The task is to check if another point e lies outside, on //
-// or inside S. //
-// //
-// The following routines use arbitrary precision floating-point arithmetic //
-// to implement these geometric predicates. They are fast and robust. It is //
-// provided by J. R. Schewchuk in public domain. See the following link: //
-// http://www.cs.cmu.edu/~quake/robust.html. The source code are found in a //
-// separate file "predicates.cxx". //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-REAL exactinit();
-REAL orient3d(REAL *pa, REAL *pb, REAL *pc, REAL *pd);
-REAL insphere(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe);
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The tetgenmesh data type //
-// //
-// Includes data types and mesh routines for Delaunay tetrahedralizations //
-// and tetrahedral meshes. //
-// //
-// An object of tetgenmesh can be used to store a triangular or tetrahedral //
-// mesh and its settings. TetGen's functions operates on one mesh each time. //
-// This type allows reusing of the same function for different meshes. //
-// //
-// The mesh data structure (tetrahedron-based and triangle-edge data struct- //
-// ures) are declared in this data type. There are other accessary data type //
-// defined as well, they are used for efficient memory management and fast //
-// link list operations, etc. //
-// //
-// All algorithms TetGen used are implemented in this data type as member //
-// functions. References of these algorithms can be found in user's manual. //
-// //
-// You don't need to study this data type if you only want to use TetGen's //
-// library to create tetrahedral mesh. The global function "tetrahedralize()"//
-// implicitly creates the object and calls its member functions due to the //
-// command line switches you used. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-class tetgenmesh {
-
- public:
-
- // Maximum number of characters in a file name (including the null).
- enum {FILENAMESIZE = 1024};
-
- // For efficiency, a variety of data structures are allocated in bulk.
- // The following constants determine how many of each structure is
- // allocated at once.
- enum {VERPERBLOCK = 4092, SUBPERBLOCK = 4092, ELEPERBLOCK = 8188};
-
- // Used for the point location scheme of Mucke, Saias, and Zhu, to
- // decide how large a random sample of tetrahedra to inspect.
- enum {SAMPLEFACTOR = 11};
-
- // Labels that signify two edge rings of a triangle defined in Muecke's
- // triangle-edge data structure, one (CCW) traversing edges in count-
- // erclockwise direction and one (CW) in clockwise direction.
- enum {CCW = 0, CW = 1};
-
- // Labels that signify whether a record consists primarily of pointers
- // or of floating-point words. Used to make decisions about data
- // alignment.
- enum wordtype {POINTER, FLOATINGPOINT};
-
- // Labels that signify the type of a vertex. An UNUSEDVERTEX is a vertex
- // read from input (.node file or tetgenio structure) or an isolated
- // vertex (outside the mesh). It is the default type for a newpoint.
- enum verttype {UNUSEDVERTEX, NONACUTEVERTEX, ACUTEVERTEX, FREESEGVERTEX,
- FACETVERTEX, PROTCYLSPHVERTEX, FREECYLSPHVERTEX,
- PROTCYLVERTEX, PROTSPHVERTEX, FREECYLVERTEX,
- FREESPHVERTEX, FREESUBVERTEX, FREEVOLVERTEX,
- DUPLICATEDVERTEX, DEADVERTEX = -32768};
-
- // Labels that signify the type of a subsegment or a subface. An input
- // (sub)segment may have type NONSHARPSEGMENT, SHARPSEGMENT. Segments
- // preceding with "PROT" are artificially created for protecting the
- // internal region of cylinders and spheres. A subface may have one of
- // the three types PROTCYLSUBFACE, PROTSPHSUBFACE, and NONPROTSUBFACE.
- enum shestype {NONSHARPSEGMENT, SHARPSEGMENT, PROTCYLSEGMENT,
- PROTSPHSEGMENT, PROTCYLSUBFACE, PROTSPHSUBFACE,
- NONPROTSUBFACE};
-
- // Labels that signify the type of flips which can be applied on a face.
- // A flipable face has one of the types T23, T32, T22, and T44. Types
- // NONCONVEX, FORBIDDEN and UNFLIPABLE indicate non-flipable faces.
- enum fliptype {T23, T32, T22, T44, UNFLIPABLE, FORBIDDENFACE,
- FORBIDDENEDGE, NONCONVEX};
-
- // Labels that signify the type of a bad tetrahedron.
- enum badtettype {SKINNY, CAP, SLIVER, ILLEGAL};
-
- // Labels that signify the result of triangle-triangle intersection.
- // The result indicates that two triangles t1 and t2 are completely
- // DISJOINT, or adjoint only at a vertex SHAREVERTEX, or adjoint at
- // an edge SHAREEDGE, or coincident SHAREFACE, or INTERSECT.
- enum intersectresult {DISJOINT, SHAREVERTEX, SHAREEDGE, SHAREFACE,
- INTERSECT};
-
- // Labels that signify the result of point location. The result of a
- // search indicates that the point falls inside a tetrahedron, inside
- // a triangle, on an edge, on a vertex, or outside the mesh.
- enum locateresult {INTETRAHEDRON, ONFACE, ONEDGE, ONVERTEX, OUTSIDE};
-
- // Labels that signify the result of vertex insertion. The result
- // indicates that the vertex was inserted with complete success, was
- // inserted but encroaches upon a subsegment, was not inserted because
- // it lies on a segment, or was not inserted because another vertex
- // occupies the same location.
- enum insertsiteresult {SUCCESSINTET, SUCCESSONFACE, SUCCESSONEDGE,
- ENCROACHINGPOINT, DUPLICATEPOINT, OUTSIDEPOINT};
-
- // Labels that signify the result of direction finding. The result
- // indicates that a segment connecting the two query points accross
- // an edge of the direction triangle/tetrahedron, across a face of
- // the direction tetrahedron, along the left edge of the direction
- // triangle/tetrahedron, along the right edge of the direction
- // triangle/tetrahedron, or along the top edge of the tetrahedron.
- enum finddirectionresult {ACROSSEDGE, ACROSSFACE, LEFTCOLLINEAR,
- RIGHTCOLLINEAR, TOPCOLLINEAR, BELOWHULL};
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The basic mesh element data structures //
-// //
-// There are four types of mesh elements: tetrahedra, subfaces, subsegments, //
-// and points, where subfaces and subsegments are triangles and edges which //
-// appear on boundaries. A tetrahedralization of a 3D point set comprises //
-// tetrahedra and points; a surface mesh of a 3D domain comprises subfaces //
-// (triangles), subsegments and points; and it is the elements of all the //
-// four types consist of a tetrahedral mesh of a 3D domain. However, TetGen //
-// uses three data types: 'tetrahedron', 'shellface', and 'point' to repres- //
-// ent the basic mesh elements. A 'tetrahedron' is a tetrahedron; while a //
-// 'shellface' can represent either a subface or a subsegment; and a 'point' //
-// represent a point. Theese three data types, linked by pointers comprise //
-// a tetrahedralization or a mesh. //
-// //
-// The data type 'tetrahedron' primarily consists of a list of four pointers //
-// to its corners, a list of four pointers to its adjoining tetrahedra, a //
-// list of four pointers to its adjoining subfaces(when subfaces are needed).//
-// Optinoally, (depending on the selected switches), it may contain an arbi- //
-// trary number of user-defined floating-point attributes, an optional max- //
-// imum volume constraint (-a switch), and a pointer to a list of high-order //
-// nodes (-o2 switch). Because the size of a tetrahedron is not determined //
-// until running time, it is not simply declared as a structure. //
-// //
-// For purpose of storing geometric information, it is important to know the //
-// ordering of the vertices of a tetrahedron. Let v0, v1, v2, and v3 be the //
-// four nodes corresponding to the order of their storage in a tetrahedron. //
-// v3 always has negative orientation with respect to v0, v1, v2 (in other //
-// words, v3 lies above the oriented plane passes through v0, v1, v2). Let //
-// the four faces of the tetrahedron be f0, f1, f2, and f3. Vertices of each //
-// face are stipulated as follows: f0 (v0, v1, v2), f1 (v0, v3, v1), f2 (v1, //
-// v3, v2), f3 (v2, v3, v0). Adjoining tetrahedra as well as subfaces are //
-// stored in the order of its faces, e.g., the first adjoining tetrahedra is //
-// the neighbor at f0, and so on. //
-// //
-// A subface is represented by the data type 'shellface'. It has three //
-// pointers to its vertices, three pointers to its adjoining subfaces, three //
-// pointers to subsegments, two pointers to its adjoining tetrahedra, and a //
-// boundary marker (an integer). Furthermore, the pointers to vertices, //
-// adjoining subfaces, and subsegments are ordered in a way that indicates //
-// their geometric relation. Let the three vertices according to the order //
-// of their storage be v0, v1 and v2, respectively, and e0, e1 and e2 be the //
-// three edges, then we have: e0 (v0, v1), e1 (v1, v2), e2 (v2, v0). Adjoin- //
-// ing subfaces and subsegments are stored in the order of its edges. //
-// //
-// A subsegment is also represented by a 'shellface'. It has exactly the //
-// same data fields as a subface has, but only uses some of them. It has two //
-// pointers to its endpoints, two pointers to its adjoining (and collinear) //
-// subsegments, one pointer to a subface containing it (there may exist any //
-// number of subfaces having it, choose one of them arbitrarily). The geome- //
-// tric relation between its endpoints and adjoining (collinear) subsegments //
-// is kept with respect to the storing order of its endpoints. The adjoining //
-// subsegment at the first endpoint is saved ahead of the other. //
-// //
-// The data type 'point' is relatively simple. A point is a list of floating //
-// -point numbers, starting with the x, y, and z coordinates, followed by an //
-// arbitrary number of optional user-defined floating-point attributes, an //
-// integer boundary marker, an integer for the point type, and a pointer to //
-// a tetrahedron. The latter is used for speeding up point location during //
-// the mesh generation. //
-// //
-// For a tetrahedron on a boundary (or a hull) of the mesh, some or all of //
-// the adjoining tetrahedra may not be present. For an interior tetrahedron, //
-// often no neighboring subfaces are present, Such absent tetrahedra and //
-// subfaces are never represented by the NULL pointers; they are represented //
-// by two special records: `dummytet', the tetrahedron fills "outer space", //
-// and `dummysh', the vacuous subfaces which are omnipresent. //
-// //
-// Tetrahedra and adjoining subfaces are glued together through the pointers //
-// saved in each data fields of them. Subfaces and adjoining subsegments are //
-// connected in the same fashion. However, there are no pointers directly //
-// gluing tetrahedra and adjoining subsegments. For the purpose of saving //
-// space, the connections between tetrahedra and subsegments are entirely //
-// mediated through subfaces. The following part is an explaination of how //
-// subfaces are connected in TetGen. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The subface-subface and subface-subsegment connections //
-// //
-// Adjoining subfaces sharing a common edge are connected in such a way that //
-// they form a face ring around the edge. It is in deed a single linked list //
-// which is cyclic, e.g., one can start from any subface in it and traverse //
-// back. When the edge is not a subsegment, the ring only has two coplanar //
-// subfaces which are pointing to each other. Otherwise, the face ring may //
-// have any number of subfaces (and are not all coplanar). //
-// //
-// The face ring around a subsegment is formed as follows. Let s be a sub- //
-// segment, and f be a subface containing s as an edge. The direction of s //
-// is stipulated from its first endpoint to its second (the first and second //
-// endpoints are according to their storage in s). When the direction of s //
-// is determined, other two edges of f are oriented following this direction.//
-// The "directional normal" of f is a ray starts from any point in f, points //
-// to the direction of the cross product of any of two edge vectors of f. //
-// //
-// The face ring of s is a cyclic ordered set of subfaces containing s, i.e.,//
-// F(s) = {f1, f2, ..., fn}, n >= 1. Where the order is defined as follows: //
-// let fi, fj be two faces in F(s), the "normal-angle", nangle(i,j) (range //
-// from 0 to 360 degree) is the angle between the directional normals of fi //
-// and fj; that fi is in front of fj (or symbolically, fi < fj) if there //
-// exists another fk in F(s), and nangle(k, i) < nangle(k, j). The face ring //
-// of s can be represented as: f1 < f2 < ... < fn < f1. //
-// //
-// The easiest way to imagine how a face ring is formed is to use the right- //
-// hand rule. Make a fist using your right hand with the thumb pointing to //
-// the direction of the subsegment. The face ring is connected following the //
-// direction of your fingers. //
-// //
-// The subface and subsegment are also connected through pointers stored in //
-// their own data fields. Every subface has a pointer ti its adjoining sub- //
-// segment. However, a subsegment only has one pointer to a subface which is //
-// containing it. Such subface can be choosn arbitrarily, other subfaces are //
-// found through the face ring. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- // The tetrahedron data structure. Fields of a tetrahedron contains:
- // - a list of four adjoining tetrahedra;
- // - a list of four vertices;
- // - a list of four subfaces (optional, used for -p switch);
- // - a list of user-defined floating-point attributes (optional);
- // - a volume constraint (optional, used for -a switch);
- // - a pointer to a list of high-ordered nodes (optional, -o2 switch);
-
- typedef REAL **tetrahedron;
-
- // The shellface data structure. Fields of a shellface contains:
- // - a list of three adjoining subfaces;
- // - a list of three vertices;
- // - a list of two adjoining tetrahedra;
- // - a list of three adjoining subsegments;
- // - a pointer to a badface containing it (optional, used for -q);
- // - an area constraint (optional, used for -q);
- // - an integer for boundary marker;
- // - an integer for type: SHARPSEGMENT, NONSHARPSEGMENT, ...;
-
- typedef REAL **shellface;
-
- // The point data structure. It is actually an array of REALs:
- // - x, y and z coordinates;
- // - a list of user-defined point attributes (optional);
- // - a pointer to a simplex (tet, tri, edge, or vertex);
- // - a pointer to a parent point (optional, used for -q);
- // - an integer for boundary marker;
- // - an integer for verttype: INPUTVERTEX, FREEVERTEX, ...;
-
- typedef REAL *point;
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The mesh handle (triface, face) data types //
-// //
-// Two special data types, 'triface' and 'face' are defined for maintaining //
-// and updating meshes. They are like pointers (or handles), which allow you //
-// to hold one particular part of the mesh, i.e., a tetrahedron, a triangle, //
-// an edge and a vertex. However, these data types do not themselves store //
-// any part of the mesh. The mesh is made of the data types defined above. //
-// //
-// Muecke's "triangle-edge" data structure is the prototype for these data //
-// types. It allows a universal representation for every tetrahedron, //
-// triangle, edge and vertex. For understanding the following descriptions //
-// of these handle data structures, readers are required to read both the //
-// introduction and implementation detail of "triangle-edge" data structure //
-// in Muecke's thesis. //
-// //
-// A 'triface' represents a face of a tetrahedron and an oriented edge of //
-// the face simultaneously. It has a pointer 'tet' to a tetrahedron, an //
-// integer 'loc' (range from 0 to 3) as the face index, and an integer 'ver' //
-// (range from 0 to 5) as the edge version. A face of the tetrahedron can be //
-// uniquly determined by the pair (tet, loc), and an oriented edge of this //
-// face can be uniquly determined by the triple (tet, loc, ver). Therefore, //
-// different usages of one triface are possible. If we only use the pair //
-// (tet, loc), it refers to a face, and if we add the 'ver' additionally to //
-// the pair, it is an oriented edge of this face. //
-// //
-// A 'face' represents a subface and an oriented edge of it simultaneously. //
-// It has a pointer 'sh' to a subface, an integer 'shver'(range from 0 to 5) //
-// as the edge version. The pair (sh, shver) determines a unique oriented //
-// edge of this subface. A 'face' is also used to represent a subsegment, //
-// in this case, 'sh' points to the subsegment, and 'shver' indicates the //
-// one of two orientations of this subsegment, hence, it only can be 0 or 1. //
-// //
-// Mesh navigation and updating are accomplished through a set of mesh //
-// manipulation primitives which operate on trifaces and faces. They are //
-// introduced below. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- class triface {
-
- public:
-
- tetrahedron* tet;
- int loc, ver;
-
- // Constructors;
- triface() : tet(0), loc(0), ver(0) {}
- // Operators;
- triface& operator=(const triface& t) {
- tet = t.tet; loc = t.loc; ver = t.ver;
- return *this;
- }
- bool operator==(triface& t) {
- return tet == t.tet && loc == t.loc && ver == t.ver;
- }
- bool operator!=(triface& t) {
- return tet != t.tet || loc != t.loc || ver != t.ver;
- }
- };
-
- class face {
-
- public:
-
- shellface *sh;
- int shver;
-
- // Constructors;
- face() : sh(0), shver(0) {}
- // Operators;
- face& operator=(const face& s) {
- sh = s.sh; shver = s.shver;
- return *this;
- }
- bool operator==(face& s) {return (sh == s.sh) && (shver == s.shver);}
- bool operator!=(face& s) {return (sh != s.sh) || (shver != s.shver);}
- };
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The badface structure //
-// //
-// This structure has several usages in TetGen. A 'badface' can represent a //
-// tetrahedron face possibly be non-locally Delaunay and will be flipped if //
-// it is. A 'badface' can hold an encroached subsegment or subface needs to //
-// be split in conforming Delaunay process. //
-// //
-// A badface has the following fields: 'tt' points to a tetrahedral face //
-// which is possibly non-locally Delaunay. 'ss' points to an encroached //
-// subsegment or subface. 'cent' is the diametric circumcent of the 'shface',//
-// Three vertices 'forg', 'fdest' and 'fapex' are stored so that one can //
-// check whether a face is still the same. 'prevface' and 'nextface' are //
-// used to implement a double link for managing many badfaces. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- struct badface {
- triface tt;
- face ss;
- REAL cent[3];
- point forg, fdest, fapex, foppo;
- struct badface *prevface, *nextface;
- };
-
- // A queue structure used to store bad tetrahedra. Each tetrahedron's
- // vertices are stored so that one can check whether a tetrahedron is
- // still the same.
-
- struct badtetrahedron {
- triface tet; // A bad tet.
- REAL key; // radius-edge ratio^2.
- REAL cent[3]; // The circumcenters' coordinates.
- point tetorg, tetdest, tetapex, tetoppo; // The four vertices.
- struct badtetrahedron *nexttet; // Pointer to next bad tet.
- };
-
- // A stack of faces flipped during the most recent vertex insertion.
- // The stack is used to undo the point insertion if the point
- // encroaches upon other subfaces or subsegments.
-
- struct flipstacker {
- triface flippedface; // A recently flipped face.
- enum fliptype fc; // The flipped type T23, T32, T22 or T44.
- point forg, fdest, fapex; // The three vertices for checking.
- struct flipstacker *prevflip; // Previous flip in the stack.
- };
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// The list, link and queue data structures //
-// //
-// These data types are used to manipulate a set of (same-typed) data items. //
-// For a given set S = {a, b, c, ...}, a list stores the elements of S in a //
-// piece of continuous memory. It allows quickly accessing each element of S,//
-// thus is suitable for storing a fix-sized set. While a link stores its //
-// elements incontinuously. It allows quickly inserting or deleting one item,//
-// thus is good for storing a size-changable set. A queue is basically a //
-// special case of a link where one data element joins the link at the end //
-// and leaves in an ordered fashion at the other end. //
-// //
-// These data types are all implemented with dynamic memory re-allocation. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- // The compfunc data type. "compfunc" is a pointer to a linear-order
- // function, which takes two 'void*' arguments and returning an 'int'.
- //
- // A function: int cmp(const T &, const T &), is said to realize a
- // linear order on the type T if there is a linear order <= on T such
- // that for all x and y in T satisfy the following relation:
- // -1 if x < y.
- // comp(x, y) = 0 if x is equivalent to y.
- // +1 if x > y.
- typedef int (*compfunc) (const void *, const void *);
-
- // The predefined compare functions for primitive data types. They
- // take two pointers of the corresponding date type, perform the
- // comparation, and return -1, 0 or 1 indicating the default linear
- // order of them.
-
- // Compare two 'integers'.
- static int compare_2_ints(const void* x, const void* y);
- // Compare two 'longs'.
- static int compare_2_longs(const void* x, const void* y);
- // Compare two 'unsigned longs'.
- static int compare_2_unsignedlongs(const void* x, const void* y);
-
- // The function used to determine the size of primitive data types and
- // set the corresponding predefined linear order functions for them.
- static void set_compfunc(char* str, int* itembytes, compfunc* pcomp);
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// List data structure. //
-// //
-// A 'list' is an array of items with automatically reallocation of memory. //
-// It behaves like an array. //
-// //
-// 'base' is the starting address of the array; The memory unit in list is //
-// byte, i.e., sizeof(char). 'itembytes' is the size of each item in byte, //
-// so that the next item in list will be found at the next 'itembytes' //
-// counted from the current position. //
-// //
-// 'items' is the number of items stored in list. 'maxitems' indicates how //
-// many items can be stored in this list. 'expandsize' is the increasing //
-// size (items) when the list is full. //
-// //
-// 'comp' is a pointer pointing to a linear order function for the list. //
-// default it is set to 'NULL'. //
-// //
-// The index of list always starts from zero, i.e., for a list L contains //
-// n elements, the first element is L[0], and the last element is L[n-1]. //
-// This feature lets lists likes C/C++ arrays. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- class list {
-
- public:
-
- char *base;
- int itembytes;
- int items, maxitems, expandsize;
- compfunc comp;
-
- public:
-
- list(int itbytes, compfunc pcomp, int mitems = 256, int exsize = 128) {
- listinit(itbytes, pcomp, mitems, exsize);
- }
- list(char* str, int mitems = 256, int exsize = 128) {
- set_compfunc(str, &itembytes, &comp);
- listinit(itembytes, comp, mitems, exsize);
- }
- ~list() { free(base); }
-
- void *operator[](int i) { return (void *) (base + i * itembytes); }
-
- void listinit(int itbytes, compfunc pcomp, int mitems, int exsize);
- void setcomp(compfunc compf) { comp = compf; }
- void clear() { items = 0; }
- int len() { return items; }
- void *append(void* appitem);
- void *insert(int pos, void* insitem);
- void del(int pos);
- int hasitem(void* checkitem);
- int remove(void* remitem);
- void sort();
- };
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Memorypool data structure. //
-// //
-// A type used to allocate memory. (It is incorporated from Shewchuk's //
-// Triangle program) //
-// //
-// firstblock is the first block of items. nowblock is the block from which //
-// items are currently being allocated. nextitem points to the next slab //
-// of free memory for an item. deaditemstack is the head of a linked list //
-// (stack) of deallocated items that can be recycled. unallocateditems is //
-// the number of items that remain to be allocated from nowblock. //
-// //
-// Traversal is the process of walking through the entire list of items, and //
-// is separate from allocation. Note that a traversal will visit items on //
-// the "deaditemstack" stack as well as live items. pathblock points to //
-// the block currently being traversed. pathitem points to the next item //
-// to be traversed. pathitemsleft is the number of items that remain to //
-// be traversed in pathblock. //
-// //
-// itemwordtype is set to POINTER or FLOATINGPOINT, and is used to suggest //
-// what sort of word the record is primarily made up of. alignbytes //
-// determines how new records should be aligned in memory. itembytes and //
-// itemwords are the length of a record in bytes (after rounding up) and //
-// words. itemsperblock is the number of items allocated at once in a //
-// single block. items is the number of currently allocated items. //
-// maxitems is the maximum number of items that have been allocated at //
-// once; it is the current number of items plus the number of records kept //
-// on deaditemstack. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- class memorypool {
-
- public:
-
- void **firstblock, **nowblock;
- void *nextitem;
- void *deaditemstack;
- void **pathblock;
- void *pathitem;
- wordtype itemwordtype;
- int alignbytes;
- int itembytes, itemwords;
- int itemsperblock;
- long items, maxitems;
- int unallocateditems;
- int pathitemsleft;
-
- public:
-
- memorypool();
- memorypool(int, int, enum wordtype, int);
- ~memorypool();
-
- void poolinit(int, int, enum wordtype, int);
- void restart();
- void *alloc();
- void dealloc(void*);
- void traversalinit();
- void *traverse();
- };
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Link data structure. //
-// //
-// A 'link' is a double linked nodes. It uses the memorypool data structure //
-// for memory management. Following is an image of a link. //
-// //
-// head-> ____0____ ____1____ ____2____ _________<-tail //
-// |__next___|--> |__next___|--> |__next___|--> |__NULL___| //
-// |__NULL___|<-- |__prev___|<-- |__prev___|<-- |__prev___| //
-// | | |_ _| |_ _| | | //
-// | | |_ Data1 _| |_ Data2 _| | | //
-// |_________| |_________| |_________| |_________| //
-// //
-// The unit size for storage is size of pointer, which may be 4-byte (in 32- //
-// bit machine) or 8-byte (in 64-bit machine). The real size of an item is //
-// stored in 'linkitembytes'. //
-// //
-// 'head' and 'tail' are pointers pointing to the first and last nodes. They //
-// do not conatin data (See above). //
-// //
-// 'nextlinkitem' is a pointer pointing to a node which is the next one will //
-// be traversed. 'curpos' remembers the position (1-based) of the current //
-// traversing node. //
-// //
-// 'linkitems' indicates how many items in link. Note it is different with //
-// 'items' of memorypool. //
-// //
-// The index of link starts from 1, i.e., for a link K contains n elements, //
-// the first element of the link is K[1], and the last element is K[n]. //
-// See the above figure. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- class link : public memorypool {
-
- public:
-
- void **head, **tail;
- void *nextlinkitem;
- int linkitembytes;
- int linkitems;
- int curpos;
- compfunc comp;
-
- public:
-
- link(int _itembytes, compfunc _comp, int itemcount) {
- linkinit(_itembytes, _comp, itemcount);
- }
- link(char* str, int itemcount) {
- set_compfunc(str, &linkitembytes, &comp);
- linkinit(linkitembytes, comp, itemcount);
- }
-
- void linkinit(int _itembytes, compfunc _comp, int itemcount);
- void setcomp(compfunc compf) { comp = compf; }
- void rewind() { nextlinkitem = *head; curpos = 1; }
- void goend() { nextlinkitem = *(tail + 1); curpos = linkitems; }
- long len() { return linkitems; }
- void clear();
- bool move(int numberofnodes);
- bool locate(int pos);
- void *add(void* newitem);
- void *insert(int pos, void* insitem);
- void *del(void* delitem);
- void *del(int pos);
- void *getitem();
- void *getnitem(int pos);
- int hasitem(void* checkitem);
- };
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Queue data structure. //
-// //
-// A 'queue' is a basically a link. Following is an image of a queue. //
-// ___________ ___________ ___________ //
-// Pop() <-- |_ _|<--|_ _|<--|_ _| <-- Push() //
-// |_ Data0 _| |_ Data1 _| |_ Data2 _| //
-// |___________| |___________| |___________| //
-// queue head queue tail //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- class queue : public link {
-
- public:
-
- queue(int bytes, int count = 256) : link(bytes, NULL, count) {}
- queue(char* str, int count = 256) : link(str, count) {}
-
- int empty() { return linkitems == 0; }
- void *push(void* newitem) { return link::add(newitem); }
- void *bot() { return link::getnitem(1); }
- void *pop() { return link::del(1); }
- };
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Following are variables used in 'tetgenmesh' for miscellaneous purposes. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- // Pointer to an object of 'tetgenio', which contains input data.
- tetgenio *in;
-
- // Pointer to an object of 'tetgenbehavor', which contains the user-
- // defined command line swithes and filenames.
- tetgenbehavior *b;
-
- // Variables used to allocate and access memory for tetrahedra, subfaces
- // subsegments, points, encroached subfaces, encroached subsegments,
- // bad-quality tetrahedra, and so on.
- memorypool *tetrahedrons;
- memorypool *subfaces;
- memorypool *subsegs;
- memorypool *points;
- memorypool *badsubsegs;
- memorypool *badsubfaces;
- memorypool *badtetrahedrons;
- memorypool *flipstackers;
-
- // Pointer to a recently visited tetrahedron. Improves point location
- // if proximate points are inserted sequentially.
- triface recenttet;
-
- // Pointer to the 'tetrahedron' that occupies all of "outer space".
- tetrahedron *dummytet;
- tetrahedron *dummytetbase; // Keep base address so we can free it later.
-
- // Pointer to the omnipresent subface. Referenced by any tetrahedron,
- // or subface that isn't connected to a subface at that location.
- shellface *dummysh;
- shellface *dummyshbase; // Keep base address so we can free it later.
-
- // List of lifting points of facets used for surface triangulation.
- REAL *liftpointarray;
-
- // List used for Delaunay refinement algorithm.
- list *qualchecktetlist;
-
- // Queues that maintain the bad (badly-shaped or too large) tetrahedra.
- // The tails are pointers to the pointers that have to be filled in to
- // enqueue an item. The queues are ordered from 63 (highest priority)
- // to 0 (lowest priority).
- badface *subquefront[2], **subquetail[2];
- badtetrahedron *tetquefront[64], **tetquetail[64];
-
- // Array (size = numberoftetrahedra * 6) for storing high-order nodes of
- // tetrahedra (only used when -o2 switch is selected).
- point *highordertable;
-
- REAL xmax, xmin, ymax, ymin, zmax, zmin; // Bounding box of points.
- REAL longest; // The longest possible edge length.
- long hullsize; // Number of faces of convex hull.
- long insegment; // Number of input segments.
- int steinerleft; // Number of Steiner points not yet used.
- int pointmarkindex; // Index to find boundary marker of a point.
- int point2simindex; // Index to find a simplex adjacent to a point.
- int highorderindex; // Index to find extra nodes for highorder elements.
- int elemattribindex; // Index to find attributes of a tetrahedron.
- int volumeboundindex; // Index to find volume bound of a tetrahedron.
- int shmarkindex; // Index to find boundary marker of a subface.
- int areaboundindex; // Index to find area bound of a subface.
- int checksubfaces; // Are there subfaces in the mesh yet?
- int checkquality; // Has quality triangulation begun yet?
- int nonconvex; // Is current mesh non-convex?
- int dupverts; // Are there duplicated vertices?
- long samples; // Number of random samples for point location.
- unsigned long randomseed; // Current random number seed.
- REAL macheps; // The machine epsilon.
- long flip23s, flip32s, flip22s, flip44s; // Number of flips performed.
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Fast lookup tables for mesh manipulation primitives. //
-// //
-// Mesh manipulation primitives (given below) are basic operations on mesh //
-// data structures. They answer basic queries on mesh handles, such as "what //
-// is the origin (or destination, or apex) of the face?", "what is the next //
-// (or previous) edge in the edge ring?", and "what is the next face in the //
-// face ring?", and so on. //
-// //
-// The implementation of basic queries can take advangtage of the fact that //
-// the mesh data structures additionally store geometric informations. For //
-// example, we have ordered the four vertices (from 0 to 3) and four faces //
-// (from 0 to 3) of a tetrahedron, and for each face of the tetrahedron, a //
-// sequence of vertices has stipulated, therefore the origin of any face of //
-// the tetrahedron can be quickly determined by a table 'locver2org', which //
-// takes the index of the face and the edge version as inputs. A list of //
-// fast lookup tables are defined below. They're just like global variables. //
-// All tables are initialized once at the runtime and used by all objects of //
-// tetgenmesh. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- // For enext() primitive, uses 'ver' as the index.
- static int ve[6];
-
- // For org(), dest() and apex() primitives, uses 'ver' as the index.
- static int vo[6], vd[6], va[6];
-
- // For org(), dest() and apex() primitives, uses 'loc' as the first
- // index and 'ver' as the second index.
- static int locver2org[4][6];
- static int locver2dest[4][6];
- static int locver2apex[4][6];
-
- // For oppo() primitives, uses 'loc' as the index.
- static int loc2oppo[4];
-
- // For fnext() primitives, uses 'loc' as the first index and 'ver' as
- // the second index, returns an array containing a new 'loc' and a
- // new 'ver'. Note: Only valid for 'ver' equals one of {0, 2, 4}.
- static int locver2nextf[4][6][2];
-
- // For enumerating three edges of a triangle.
- static int plus1mod3[3];
- static int minus1mod3[3];
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Mesh manipulation primitives //
-// //
-// A serial of mesh operations such as topological maintenance, navigation, //
-// local modification, etc., is accomplished through a set of mesh manipul- //
-// ation primitives. These primitives are indeed very simple functions which //
-// take one or two handles ('triface's and 'face's) as parameters, perform //
-// basic operations such as "glue two tetrahedra at a face", "return the //
-// origin of a tetrahedron", "return the subface adjoining at the face of a //
-// tetrahedron", and so on. //
-// //
-// In the following, symbols t, t1, and t2 denote handles of type 'triface', //
-// i.e., t is a face of a tetrahedron. Likewise, handles of type 'face' are //
-// denoted by s, s1, s2; e denotes an oriented edge, and v denotes a vertex. //
-// //
-// The basic primitives for tetrahedra are: //
-// //
-// sym(t1, t2) t1 and t2 refer to the same face but point to two //
-// different tetrahedra respectively. //
-// bond(t1, t2) Bonds t1 and t2 together. t1 and t2 should refer to //
-// the same face. //
-// dissolve(t) Detaches the adjoining tetrahedron from t. t bonds to //
-// 'dummytet' after this operation. //
-// //
-// v = org(t) v is the origin of t. //
-// v = dest(t) v is the destination of t. //
-// v = apex(t) v is the apex of t. //
-// v = oppo(t) v is the opposite of t. //
-// //
-// esym(t1, t2) t2 is the inversed edge of t1, i.e., t1 and t2 are two //
-// directed edges of the same undirected edge. //
-// enext(t1, t2) t2 is the successor of t1 in the edge ring. //
-// enext2(t1, t2) t2 is the precessor of t1 in the edge ring. //
-// //
-// fnext(t1, t2) t2 is the successor of t1 in the face ring. //
-// //
-// The basic primitives for subfaces (as well as subsegments) are: //
-// //
-// spivot(s1, s2) s1 and s2 refer to the same edge but point to two //
-// different subfaces respectively. //
-// sbond(s1, s2) Bonds s1 and s2 together (at an edge). //
-// sbond1(s1, s2) Only bonds s2 to s1 (but not s1 to s2). It is used //
-// for creating the face ring. //
-// sdissolve(s) Detaches the adjoining subface from s. s bonds to //
-// 'dummysh' after this operation. //
-// //
-// v = sorg(s) v is the origin of s. //
-// v = sdest(s) v is the destination of s. //
-// v = sapex(s) v is the apex of s. //
-// //
-// sesym(s1, s2) s2 is the inversed edge of s1. //
-// senext(s1, s2) s2 is the successor of s1 in the edge ring. //
-// senext2(s1, s2) s2 is the precessor of s1 in the edge ring.. //
-// //
-// For interacting tetrahedra and subfaces: //
-// //
-// tspivot(t, s) Returns the adjoining subface of t in s. s may hold //
-// 'dummysh' when t is an internal face. //
-// stpivot(s, t) Returns the adjoining tetrahedron of s in t. t may be //
-// 'dummytet'. //
-// tsbond(t, s) Bond t and s together. t and s must represent the //
-// same face. //
-// tsdissolve(t) Detaches the adjoining subface from t. //
-// stdissolve(s) Detaches the adjoining tetrahedron from s. //
-// //
-// For interacting subfaces and subsegments: //
-// //
-// sspivot(s, e) Returns the adjoining subsegment of s in e. //
-// ssbond(s, e) Bond s and e together. s and e must represent the //
-// same edge. //
-// ssdissolve(s) Detaches the adjoining subsegment from s. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- // Primitives for tetrahedra.
- inline void decode(tetrahedron ptr, triface& t);
- inline tetrahedron encode(triface& t);
- inline void sym(triface& t1, triface& t2);
- inline void symself(triface& t);
- inline void bond(triface& t1, triface& t2);
- inline void dissolve(triface& t);
- inline point org(triface& t);
- inline point dest(triface& t);
- inline point apex(triface& t);
- inline point oppo(triface& t);
- inline void setorg(triface& t, point pointptr);
- inline void setdest(triface& t, point pointptr);
- inline void setapex(triface& t, point pointptr);
- inline void setoppo(triface& t, point pointptr);
- inline void esym(triface& t1, triface& t2);
- inline void esymself(triface& t);
- inline void enext(triface& t1, triface& t2);
- inline void enextself(triface& t);
- inline void enext2(triface& t1, triface& t2);
- inline void enext2self(triface& t);
- inline bool fnext(triface& t1, triface& t2);
- inline bool fnextself(triface& t);
- inline void enextfnext(triface& t1, triface& t2);
- inline void enextfnextself(triface& t);
- inline void enext2fnext(triface& t1, triface& t2);
- inline void enext2fnextself(triface& t);
- inline void infect(triface& t);
- inline void uninfect(triface& t);
- inline bool infected(triface& t);
- inline REAL elemattribute(tetrahedron* ptr, int attnum);
- inline void setelemattribute(tetrahedron* ptr, int attnum, REAL value);
- inline REAL volumebound(tetrahedron* ptr);
- inline void setvolumebound(tetrahedron* ptr, REAL value);
-
- // Primitives for subfaces and subsegments.
- inline void sdecode(shellface sptr, face& s);
- inline shellface sencode(face& s);
- inline void spivot(face& s1, face& s2);
- inline void spivotself(face& s);
- inline void sbond(face& s1, face& s2);
- inline void sbond1(face& s1, face& s2);
- inline void sdissolve(face& s);
- inline point sorg(face& s);
- inline point sdest(face& s);
- inline point sapex(face& s);
- inline void setsorg(face& s, point pointptr);
- inline void setsdest(face& s, point pointptr);
- inline void setsapex(face& s, point pointptr);
- inline void sesym(face& s1, face& s2);
- inline void sesymself(face& s);
- inline void senext(face& s1, face& s2);
- inline void senextself(face& s);
- inline void senext2(face& s1, face& s2);
- inline void senext2self(face& s);
- inline void sfnext(face&, face&);
- inline void sfnextself(face&);
- inline badface* shell2badface(face& s);
- inline void setshell2badface(face& s, badface* value);
- inline REAL areabound(face& s);
- inline void setareabound(face& s, REAL value);
- inline int shellmark(face& s);
- inline void setshellmark(face& s, int value);
- inline enum shestype shelltype(face& s);
- inline void setshelltype(face& s, enum shestype value);
- inline void sinfect(face& s);
- inline void suninfect(face& s);
- inline bool sinfected(face& s);
-
- // Primitives for interacting tetrahedra and subfaces.
- inline void tspivot(triface& t, face& s);
- inline void stpivot(face& s, triface& t);
- inline void tsbond(triface& t, face& s);
- inline void tsdissolve(triface& t);
- inline void stdissolve(face& s);
-
- // Primitives for interacting subfaces and subsegs.
- inline void sspivot(face& s, face& edge);
- inline void ssbond(face& s, face& edge);
- inline void ssdissolve(face& s);
-
- // Primitives for points.
- inline int pointmark(point pt);
- inline void setpointmark(point pt, int value);
- inline enum verttype pointtype(point pt);
- inline void setpointtype(point pt, enum verttype value);
- inline tetrahedron point2tet(point pt);
- inline void setpoint2tet(point pt, tetrahedron value);
- inline shellface point2sh(point pt);
- inline void setpoint2sh(point pt, shellface value);
- inline point point2pt(point pt);
- inline void setpoint2pt(point pt, point value);
- inline point point2ppt(point pt);
- inline void setpoint2ppt(point pt, point value);
- inline point getliftpoint(int facetmark);
-
- // Advanced primitives.
- inline void adjustedgering(triface& t, int direction);
- inline void adjustedgering(face& s, int direction);
- inline bool isdead(triface* t);
- inline bool isdead(face* s);
- inline bool isfacehaspoint(face* t, point testpoint);
- inline bool isfacehasedge(face* s, point tend1, point tend2);
- inline bool issymexist(triface* t);
- bool getnextface(triface*, triface*);
- void getnextsface(face*, face*);
- void tsspivot(triface*, face*);
- void sstpivot(face*, triface*);
- bool findorg(triface* t, point dorg);
- bool findorg(face* s, point dorg);
- void findedge(triface* t, point eorg, point edest);
- void findedge(face* s, point eorg, point edest);
- void findface(triface *fface, point forg, point fdest, point fapex);
- void getonextseg(face* s, face* lseg);
- void getseghasorg(face* sseg, point dorg);
- point getsubsegfarorg(face* sseg);
- point getsubsegfardest(face* sseg);
- void printtet(triface*);
- void printsh(face*);
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// Primitive geometric test functions //
-// //
-// A primitive operation is a function f that maps a set Q of k objects to //
-// +1, 0, or -1. Primitive geometric functions operater on geometric objects //
-// (points, segments, triangles, polyhedron, etc), determine the geometric //
-// relations between them. Like the orientation of a sequence of d+1 points //
-// in d-dimension, whether or not a point lies inside a triangle, and so on. //
-// Algorithms for solving geometric problems are always based on the answers //
-// of some primitives so that the corresponding deterministic rules can be //
-// applied. However, the implementation of geometric algorithms is not a //
-// trivial task even for one which is very simple and only relies on few //
-// primitives. The correctness of primitives is crucial for the cotrol flow. //
-// //
-// The following functions perform various primitives geometric tests, some //
-// perform tests with exact arithmetic and some do not. //
-// //
-// The triangle-triangle intersection test is implemented with exact arithm- //
-// etic. It exactly tells whether or not two triangles in three dimensions //
-// intersect. Before implementing this test myself, I tried two C codes //
-// (implemented by Thomas Moeller and Philippe Guigue, respectively), which //
-// are all public available and very efficient. However both of them failed //
-// frequently. Another unsuitable problem is that both codes only tell //
-// whether or not two triangles are intersecting and not distinguish the //
-// cases whether they are exactly intersecting in interior or they share a //
-// vertex, or share an edge. All the latter cases are acceptable and should //
-// return not intersection in TetGen. //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
- // Triangle-triangle intersection tests
- enum intersectresult edge_vertex_collinear_inter(REAL*, REAL*, REAL*);
- enum intersectresult edge_edge_coplanar_inter(REAL*, REAL*, REAL*,
- REAL*, REAL*);
- enum intersectresult triangle_vertex_coplanar_inter(REAL*, REAL*, REAL*,
- REAL*, REAL*);
- enum intersectresult triangle_edge_coplanar_inter(REAL*, REAL*, REAL*,
- REAL*, REAL*, REAL*);
- enum intersectresult triangle_edge_inter_tail(REAL*, REAL*, REAL*, REAL*,
- REAL*, REAL, REAL);
- enum intersectresult triangle_edge_inter(REAL*, REAL*, REAL*, REAL*,
- REAL*);
- enum intersectresult triangle_triangle_inter(REAL*, REAL*, REAL*, REAL*,
- REAL*, REAL*);
-
- // Degenerate cases tests
- bool iscollinear(REAL*, REAL*, REAL*, REAL epspp);
- bool iscoplanar(REAL*, REAL*, REAL*, REAL*, REAL vol6, REAL epspp);
- bool iscospheric(REAL*, REAL*, REAL*, REAL*, REAL*, REAL epspp);
-
- // Linear algebra functions
- inline REAL dot(REAL* v1, REAL* v2);
- inline void cross(REAL* v1, REAL* v2, REAL* n);
- void initm44(REAL a00, REAL a01, REAL a02, REAL a03,
- REAL a10, REAL a11, REAL a12, REAL a13,
- REAL a20, REAL a21, REAL a22, REAL a23,
- REAL a30, REAL a31, REAL a32, REAL a33, REAL M[4][4]);
- void m4xm4(REAL m1[4][4], REAL m2[4][4]);
- void m4xv4(REAL v2[4], REAL m[4][4], REAL v1[4]);
- bool lu_decmp(REAL lu[3][3], int n, int* ps, REAL* d, int N);
- void lu_solve(REAL lu[3][3], int n, int* ps, REAL* b, int N);
-
- // Geometric quantities calculators.
- inline REAL distance(REAL* p1, REAL* p2);
- REAL shortdistance(REAL* p, REAL* e1, REAL* e2);
- REAL interiorangle(REAL* o, REAL* p1, REAL* p2, REAL* n);
- void projpt2edge(REAL* p, REAL* e1, REAL* e2, REAL* prj);
- void projpt2face(REAL* p, REAL* f1, REAL* f2, REAL* f3, REAL* prj);
- void facenormal(REAL* pa, REAL* pb, REAL* pc, REAL* n, REAL* nlen);
- void edgeorthonormal(REAL* e1, REAL* e2, REAL* op, REAL* n);
- REAL facedihedral(REAL* pa, REAL* pb, REAL* pc1, REAL* pc2);
- void tetalldihedral(point, point, point, point, REAL dihed[6]);
- bool circumsphere(REAL*, REAL*, REAL*, REAL*, REAL* cent, REAL* radius);
- void inscribedsphere(REAL*, REAL*, REAL*, REAL*, REAL* cent, REAL* radius);
- void rotatepoint(REAL* p, REAL rotangle, REAL* p1, REAL* p2);
- void spherelineint(REAL* p1, REAL* p2, REAL* C, REAL R, REAL p[7]);
- void linelineint(REAL *p1,REAL *p2, REAL *p3, REAL *p4, REAL p[7]);
-
- // Memory managment routines.
- void dummyinit(int, int);
- void initializepointpool();
- void initializetetshpools();
- void tetrahedrondealloc(tetrahedron*);
- tetrahedron *tetrahedrontraverse();
- void shellfacedealloc(memorypool*, shellface*);
- shellface *shellfacetraverse(memorypool*);
- void badfacedealloc(memorypool*, badface*);
- badface *badfacetraverse(memorypool*);
- void pointdealloc(point);
- point pointtraverse();
- void maketetrahedron(triface*);
- void makeshellface(memorypool*, face*);
- void makepoint(point*);
-
- // Mesh items searching routines.
- void makepoint2tetmap();
- void makeindex2pointmap(point*& idx2verlist);
- void makesegmentmap(int*& idx2seglist, shellface**& segsperverlist);
- void makesubfacemap(int*& idx2facelist, shellface**& facesperverlist);
- void maketetrahedronmap(int*& idx2tetlist, tetrahedron**& tetsperverlist);
-
- // Point location routines.
- unsigned long randomnation(unsigned int choices);
- REAL distance2(tetrahedron* tetptr, point p);
- enum locateresult preciselocate(point searchpoint, triface* searchtet);
- enum locateresult locate(point searchpoint, triface* searchtet);
- enum locateresult adjustlocate(point searchpoint, triface* searchtet,
- enum locateresult precise, REAL epspp);
-
- // Mesh transformation routines.
- enum fliptype categorizeface(triface& horiz);
- void enqueueflipface(triface& checkface, queue* flipqueue);
- void enqueueflipedge(face& checkedge, queue* flipqueue);
- void flip23(triface* flipface, queue* flipqueue);
- void flip32(triface* flipface, queue* flipqueue);
- void flip22(triface* flipface, queue* flipqueue);
- void flip22sub(face* flipedge, queue* flipqueue);
- long flip(queue* flipqueue, flipstacker **plastflip);
- void undoflip(flipstacker *lastflip);
-
- void splittetrahedron(point newpoint, triface* splittet, queue* flipqueue);
- void unsplittetrahedron(triface* splittet);
- void splittetface(point newpoint, triface* splittet, queue* flipqueue);
- void unsplittetface(triface* splittet);
- void splitsubface(point newpoint, face* splitface, queue* flipqueue);
- void unsplitsubface(face* splitsh);
- void splittetedge(point newpoint, triface* splittet, queue* flipqueue);
- void unsplittetedge(triface* splittet);
- void splitsubedge(point newpoint, face* splitsh, queue* flipqueue);
- void unsplitsubedge(face* splitsh);
- enum insertsiteresult insertsite(point newpoint, triface* searchtet,
- bool approx, queue* flipqueue);
- void undosite(enum insertsiteresult insresult, triface* splittet,
- point torg, point tdest, point tapex, point toppo);
- void inserthullsite(point inspoint, triface* horiz, queue* flipqueue,
- link* hulllink, int* worklist);
- void collectcavtets(point newpoint, list* cavtetlist);
-
- void removetetbypeeloff(triface *badtet, queue* flipqueue);
- void removetetbyflip32(triface *badtet, queue* flipqueue);
- bool removetetbycflips(triface *badtet, queue* flipqueue);
- bool removebadtet(enum badtettype bt, triface *badtet, queue* flipqueue);
-
- // Incremental flip Delaunay triangulation routines.
- void incrflipinit(queue* insertqueue);
- long incrflipdelaunay();
-
- // Surface triangulation routines.
- enum locateresult locatesub(point searchpt, face* searchsh, point abovept);
- long flipsub(queue* flipqueue);
- bool incrflipinitsub(int facetidx, list* ptlist, point* idx2verlist);
- void collectvisiblesubs(int facetidx, point inspoint, face* horiz,
- queue* flipqueue);
- void incrflipdelaunaysub(int facetidx, list* ptlist, point* idx2verlist,
- queue* flipqueue);
- enum finddirectionresult finddirectionsub(face* searchsh, point tend);
- void insertsubseg(face* tri);
- bool scoutsegmentsub(face* searchsh, point tend);
- void delaunayfixup(face* fixupsh, int leftside);
- void constrainededge(face* startsh, point tend);
- void insertsegmentsub(point tstart, point tend);
- void infecthullsub(memorypool* viri);
- void plaguesub(memorypool* viri);
- void carveholessub(int holes, REAL* holelist);
- void triangulatefacet(int facetidx, list* ptlist, list* conlist,
- point* idx2verlist, queue* flipqueue);
- void unifysegments();
- void mergefacets(queue* flipqueue);
- long meshsurface();
-
- // Detect intersecting facets of PLC.
- void interecursive(shellface** subfacearray, int arraysize, int axis,
- REAL bxmin, REAL bxmax, REAL bymin, REAL bymax,
- REAL bzmin, REAL bzmax, int* internum);
- void detectinterfaces();
-
- // Segments recovery routines.
- void markacutevertices(REAL acuteangle);
- enum finddirectionresult finddirection(triface* searchtet, point tend);
- void getsearchtet(point p1, point p2, triface* searchtet, point* tend);
- bool isedgeencroached(point p1, point p2, point testpt, bool degflag);
- point scoutrefpoint(triface* searchtet, point tend);
- point getsegmentorigin(face* splitseg);
- point getsplitpoint(face* splitseg, point refpoint);
- void delaunizesegments();
-
- // Constrained Delaunay triangulation routines.
- bool insertsubface(face* insertsh, triface* searchtet);
- bool tritritest(triface* checktet, point p1, point p2, point p3);
- void initializecavity(list* floorlist, list* ceillist, list* floorptlist,
- list* ceilptlist, link* frontlink, link* ptlink);
- bool reducecavity(link* frontlink, link* ptlink, queue* flipqueue);
- bool reducecavity1(link* frontlink, queue* flipqueue);
- void triangulatecavity(list* floorlist, list* ceillist, list* floorptlist,
- list* ceilptlist);
- void formmissingregion(face* missingsh, list* missingshlist,
- list* equatptlist, int* worklist);
- bool scoutcrossingedge(list* missingshlist, list* boundedgelist,
- list* crossedgelist, int* worklist);
- void rearrangesubfaces(list* missingshlist, list* boundedgelist,
- list* equatptlist, int* worklist);
- void recoversubfaces(list* missingshlist, list* crossedgelist,
- list* equatptlist, int* worklist);
- void constrainedfacets();
-
- // Carving out holes and concavities routines.
- void indenthull();
- void infecthull(memorypool *viri);
- void plague(memorypool *viri);
- void regionplague(memorypool *viri, REAL attribute, REAL volume);
- void carveholes();
-
- // Mesh update rotuines.
- long reconstructmesh();
- void insertaddpoints();
-
- // Delaunay refinement routines.
- void initializerpsarray(REAL* rpsarray);
- void marksharpfacets(int*& idx2facetlist, REAL dihedbound);
- void enqueuebadtet(triface *instet, REAL ratio, point insorg,
- point insdest, point insapex, point insoppo,
- point inscent);
- badtetrahedron* dequeuebadtet();
- bool checkseg4encroach(face* testseg, point testpt, bool enqueueflag);
- bool checksub4encroach(face* testsub, point testpt, bool enqueueflag);
- bool checksub4badqual(face* testsub);
- bool checktet4badqual(triface* testtet);
- bool checktet4illtet(triface* testtet, list* illtetlist);
- bool checktet4sliver(triface* testtet, list* illtetlist);
- bool checkseg4splitting(face* testseg, REAL* rpsarray, bool bqual);
- bool checksub4splitting(face* testsub);
- void doqualchecktetlist();
- bool tallencsegs(point testpt, list *cavtetlist);
- bool tallencsubs(point testpt, list *cavtetlist);
- void tallbadtetrahedrons();
- void tallilltets(list* illtetlist);
- void tallslivers(list* illtetlist);
- void removeilltets();
- void removeslivers();
- void repairencsegs(REAL* rpsarray, bool bqual, queue* flipqueue);
- void repairencsubs(REAL* rpsarray, int* idx2facetlist, list* cavtetlist,
- queue* flipqueue);
- void repairbadtets(REAL* rpsarray, int* idx2facetlist, list* cavtetlist,
- queue* flipqueue);
- void enforcequality();
-
- // I/O routines
- void transfernodes();
- void jettisonnodes();
- void highorder();
- void outnodes(tetgenio* out);
- void outelements(tetgenio* out);
- void outfaces(tetgenio* out);
- void outhullfaces(tetgenio* out);
- void outsubfaces(tetgenio* out);
- void outsubsegments(tetgenio* out);
- void outneighbors(tetgenio* out);
- void outsmesh(char* smfilename);
- void outmesh2medit(char* mfilename);
- void outmesh2gid(char* gfilename);
- void outmesh2off(char* ofilename);
-
- // User interaction routines.
- void internalerror();
- void checkmesh();
- void checkshells();
- void checkdelaunay(queue* flipqueue);
- void checkconforming();
- void qualitystatistics();
- void statistics();
-
- public:
-
- // Constructor and destructor.
- tetgenmesh();
- ~tetgenmesh();
-
-}; // End of class tetgenmesh.
-
-///////////////////////////////////////////////////////////////////////////////
-// //
-// tetrahedralize() Interface for using TetGen's library to generate //
-// Delaunay tetrahedralizations, constrained Delaunay //
-// tetrahedralizations, quality tetrahedral meshes. //
-// //
-// Two functions (interfaces) are available. The difference is only the way //
-// of passing switches. One directly accepts an object of 'tetgenbehavior', //
-// the other accepts a string which is the same as one can used in command //
-// line. The latter may be more convenient for users who don't know the //
-// 'tetgenbehavir' structure. //
-// //
-// 'in' is the input object containing a PLC or a list of points. It should //
-// not be a NULL. 'out' is for outputting the mesh or tetrahedralization //
-// created by TetGen. If it is NULL, the output will be redirect to file(s). //
-// //
-///////////////////////////////////////////////////////////////////////////////
-
-void tetrahedralize(tetgenbehavior *b, tetgenio *in, tetgenio *out);
-void tetrahedralize(char *switches, tetgenio *in, tetgenio *out);
-
-#endif // #ifndef tetgenH
+///////////////////////////////////////////////////////////////////////////////
+// //
+// TetGen //
+// //
+// A Quality Tetrahedral Mesh Generator and 3D Delaunay Triangulator //
+// //
+// Version 1.3.4 //
+// June 13, 2005 //
+// //
+// Copyright 2002, 2004, 2005 //
+// Hang Si //
+// Rathausstr. 9, 10178 Berlin, Germany //
+// si@wias-berlin.de //
+// //
+// You can obtain TetGen via internet: http://tetgen.berlios.de. It may be //
+// freely copied, modified, and redistributed under the copyright notices //
+// given in the file LICENSE. //
+// //
+// TetGen computes Delaunay tetrahedralizations, constrained Delaunay tetra- //
+// hedralizations, and quality Delaunay tetrahedral meshes. The latter are //
+// nicely graded and whose tetrahedra have radius-edge ratio bounded. Such //
+// meshes are suitable for finite element and finite volume methods. //
+// //
+// TetGen incorporates a suit of geometrical and mesh generation algorithms. //
+// A brief description of algorithms used in TetGen is found in the first //
+// section of the user's manual. References are given for users who are //
+// interesting in these approaches. The main references are given below: //
+// //
+// The efficient Delaunay tetrahedralization algorithm is: H. Edelsbrunner //
+// and N. R. Shah, "Incremental Topological Flipping Works for Regular //
+// Triangulations". Algorithmica 15: 223-241, 1996. //
+// //
+// The constrained Delaunay tetrahedralization algorithm is described in: //
+// H. Si and K. Gaertner, "Meshing Piecewise Linear Complexs by Constrain- //
+// ed Delaunay Tetrahedralizations". To appear in Proceedings of the 14th //
+// International Mesh Roundtable. September 2005. //
+// //
+// The Delaunay refinement algorithm is from: J. R. Shewchuk, "Tetrahedral //
+// Mesh Generation by Delaunay Refinement". Proceedings of the 14th Annual //
+// Symposium on Computational Geometry, pages 86-95, 1998. //
+// //
+// The mesh data structure of TetGen is a combination of two types of mesh //
+// data structures. The tetrahedron-based mesh data structure introduced //
+// by Shewchuk is eligible to implement algorithms of generating Delaunay //
+// tetrahedralizations. However, constrained Delaunay tetrahedralization //
+// and quality mesh generation algorithms require other mesh elements //
+// (subfaces, subsegments) be handled at the same time. The triangle-edge //
+// data structure from Muecke is used for this purpose. These data types //
+// are handled through a set of fast mesh manipulation primitives. //
+// //
+// J. R. Shewchuk, "Delaunay Refinement Mesh Generation". PhD thesis, //
+// Carnegie Mellon University, 1997. //
+// //
+// E. P. Muecke, "Shapes and Implementations in Three-Dimensional //
+// Geometry". PhD thesis, Univ. of Illinois, Urbana, Illinois, 1993. //
+// //
+// The research of mesh generation is definitly on the move. A lot of state- //
+// of-the-art algorithms need to be implemented and evaluated. I heartily //
+// welcome new algorithms especially for quality conforming Delaunay mesh //
+// generation and anisotropic conforming Delaunay mesh generation. If you //
+// have any idea on new approaches, please please kindly let me know. //
+// //
+// TetGen is supported by the "pdelib" project of Weierstrass Institute for //
+// Applied Analysis and Stochastics (WIAS) in Berlin. It is a collection //
+// of software components for solving non-linear partial differential //
+// equations including 2D and 3D mesh generators, sparse matrix solvers, //
+// and scientific visualization tools, etc. For more information please //
+// see: http://www.wias-berlin.de/software/pdelib. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetgen.h //
+// //
+// Header file of the TetGen library. Also is the user-level header file. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// TetGen Library Overview //
+// //
+// TetGen library is comprised by several data types and global functions. //
+// //
+// If you quickly go through this file, you will find there are only three //
+// main data types defined, which are "tetgenio", "tetgenbehavior", and //
+// "tetgenmesh". Tetgenio is used to pass data into and out of mesh routines //
+// of the library; tetgenbehavior sets the command line options selected by //
+// user and thus controls the behaviors of TetGen; tetgenmesh, the biggest //
+// data type I've ever defined, contains everything for creating Delaunay //
+// tetrahedralizations and tetrahedral meshes. These data types are defined //
+// as C++ classes. //
+// //
+// There are few global functions as well. "tetrahedralize()" is the (only) //
+// user interface for calling TetGen from other programs. Two functions //
+// "orient3d()" and "insphere()" for performing exact geometrical tests are //
+// incorporated from a public C code provided by J. R. Shewchuk. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+#ifndef tetgenH
+#define tetgenH
+
+// To compile TetGen as a library (e.g. libtet.a) but not as an executable
+// program, define the TETLIBRARY symbol. The library of TetGen can be
+// linked with programs which want to call TetGen as a function.
+
+// #define TETLIBRARY
+
+// Uncomment the following line to disable assert macros. These macros are
+// inserted in places where I hope to catch bugs. Somewhat, they slow down
+// the speed of TetGen. They can be ignored by adding the -DNDEBUG
+// compiler switch or uncomment the following line
+
+// #define NDEBUG
+
+// To insert lots of self-checks for internal errors, define the SELF_CHECK
+// symbol. This will slow down the program significantly.
+
+// #define SELF_CHECK
+
+// For single precision ( which will save some memory and reduce paging ),
+// define the symbol SINGLE by using the -DSINGLE compiler switch or by
+// writing "#define SINGLE" below.
+//
+// For double precision ( which will allow you to refine meshes to a smaller
+// edge length), leave SINGLE undefined.
+
+// #define SINGLE
+
+#ifdef SINGLE
+ #define REAL float
+#else
+ #define REAL double
+#endif // not defined SINGLE
+
+// Here is the most general used head files for all C/C++ codes
+
+#include <stdio.h> // Standard IO: FILE, NULL, EOF, printf(), ...
+#include <stdlib.h> // Standard lib: abort(), system(), getenv(), ...
+#include <string.h> // String lib: strcpy(), strcat(), strcmp(), ...
+#include <math.h> // Math lib: sin(), sqrt(), pow(), ...
+#include <assert.h>
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The tetgenio data type //
+// //
+// Used to pass data into and out of the library of TetGen. //
+// //
+// If you want to program with the library of TetGen, it's necessary for you //
+// to understand the tetgenio data type, while the other two data types can //
+// be hidden through calling the global function "tetrahedralize()". As you //
+// will see below, that basically tetgenio is nothing more than a collection //
+// of arrays. These arrays are used to store points, tetrahedra, (triangular)//
+// faces, boundary markers, and so forth. They are used to describe data in //
+// input & output files of TetGen. If you understand TetGen's file formats, //
+// then it is straighforward to understand these arrays. The file formats of //
+// TetGen are described in the third section of the user's manual. //
+// //
+// Once you create an object of tetgenio, all arrays are initialized to NULL.//
+// This is done by routine "initialize()", it is automatically called by the //
+// constructor. Before you can set data into these arrays, you have to first //
+// allocate enough memory for them. And you need to clear the memory after //
+// the use of them. "deinitialize()" is automatically called on deletion of //
+// the object. It will deallocate the memory in a array if it is not a NULL. //
+// However, it assumes that the memory is allocated by C++ operator 'new'. //
+// If you use malloc(), you should free() them and set the pointers to NULLs //
+// before the code reaches deinitialize(). //
+// //
+// In all cases, the first item in any array is stored starting at index [0].//
+// However, that item is item number `firstnumber' which may be '0' or '1'. //
+// Be sure to set the 'firstnumber' be '1' if your indices pointing into the //
+// pointlist is starting from '1'. Default, it is initialized be '0'. //
+// //
+// Tetgenio also contains routines for reading and writing TetGen's files as //
+// well. Both the library of TetGen and TetView use these routines to parse //
+// input files, i.e., .node, .poly, .smesh, .ele, .face, and .edge files. //
+// Other routines are provided mainly for debugging purpose. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+class tetgenio {
+
+ public:
+
+ // Maximum number of characters in a file name (including the null).
+ enum {FILENAMESIZE = 1024};
+
+ // Maxi. numbers of chars in a line read from a file (incl. the null).
+ enum {INPUTLINESIZE = 1024};
+
+ // The polygon data structure. A "polygon" is a planar polygon. It can
+ // be arbitrary shaped (convex or non-convex) and bounded by non-
+ // crossing segments, i.e., the number of vertices it has indictes the
+ // same number of edges.
+ // 'vertexlist' is a list of vertex indices (integers), its length is
+ // indicated by 'numberofvertices'. The vertex indices are odered in
+ // either counterclockwise or clockwise way.
+ typedef struct {
+ int *vertexlist;
+ int numberofvertices;
+ } polygon;
+
+ static void init(polygon* p) {
+ p->vertexlist = (int *) NULL;
+ p->numberofvertices = 0;
+ }
+
+ // The facet data structure. A "facet" is a planar facet. It is used
+ // to represent a planar straight line graph (PSLG) in two dimension.
+ // A PSLG contains a list of polygons. It also may conatin holes in it,
+ // indicated by a list of hole points (their coordinates).
+ typedef struct {
+ polygon *polygonlist;
+ int numberofpolygons;
+ REAL *holelist;
+ int numberofholes;
+ } facet;
+
+ static void init(facet* f) {
+ f->polygonlist = (polygon *) NULL;
+ f->numberofpolygons = 0;
+ f->holelist = (REAL *) NULL;
+ f->numberofholes = 0;
+ }
+
+ // The periodic boundary condition group data structure. A "pbcgroup"
+ // contains the definition of a pbc and the list of pbc point pairs.
+ // 'fmark1' and 'fmark2' are the facetmarkers of the two pbc facets f1
+ // and f2, respectively. 'transmat' is the transformation matrix which
+ // maps a point in f1 into f2. An array of pbc point pairs are saved
+ // in 'pointpairlist'. The first point pair is at indices [0] and [1],
+ // followed by remaining pairs. Two integers per pair.
+ typedef struct {
+ int fmark1, fmark2;
+ REAL transmat[4][4];
+ int numberofpointpairs;
+ int *pointpairlist;
+ } pbcgroup;
+
+ public:
+
+ // Items are numbered starting from 'firstnumber' (0 or 1), default is 0.
+ int firstnumber;
+
+ // Dimension of the mesh (2 or 3), default is 3.
+ int mesh_dim;
+
+ // `pointlist': An array of point coordinates. The first point's x
+ // coordinate is at index [0] and its y coordinate at index [1], its
+ // z coordinate is at index [2], followed by the coordinates of the
+ // remaining points. Each point occupies three REALs.
+ // `pointattributelist': An array of point attributes. Each point's
+ // attributes occupy `numberofpointattributes' REALs.
+ // 'addpointlist': An array of additional point coordinates.
+ // `pointmarkerlist': An array of point markers; one int per point.
+ REAL *pointlist;
+ REAL *pointattributelist;
+ REAL *addpointlist;
+ int *pointmarkerlist;
+ int numberofpoints;
+ int numberofpointattributes;
+ int numberofaddpoints;
+
+ // `elementlist': An array of element (triangle or tetrahedron) corners.
+ // The first element's first corner is at index [0], followed by its
+ // other corners in counterclockwise order, followed by any other
+ // nodes if the element represents a nonlinear element. Each element
+ // occupies `numberofcorners' ints.
+ // `elementattributelist': An array of element attributes. Each
+ // element's attributes occupy `numberofelementattributes' REALs.
+ // `elementconstraintlist': An array of constraints, i.e. triangle's
+ // area or tetrahedron's volume; one REAL per element. Input only.
+ // `neighborlist': An array of element neighbors; 3 or 4 ints per
+ // element. Output only.
+ int *tetrahedronlist;
+ REAL *tetrahedronattributelist;
+ REAL *tetrahedronvolumelist;
+ int *neighborlist;
+ int numberoftetrahedra;
+ int numberofcorners;
+ int numberoftetrahedronattributes;
+
+ // `facetlist': An array of facets. Each entry is a structure of facet.
+ // `facetmarkerlist': An array of facet markers; one int per facet.
+ facet *facetlist;
+ int *facetmarkerlist;
+ int numberoffacets;
+
+ // `holelist': An array of holes. The first hole's x, y and z
+ // coordinates are at indices [0], [1] and [2], followed by the
+ // remaining holes. Three REALs per hole.
+ REAL *holelist;
+ int numberofholes;
+
+ // `regionlist': An array of regional attributes and volume constraints.
+ // The first constraint's x, y and z coordinates are at indices [0],
+ // [1] and [2], followed by the regional attribute at index [3], foll-
+ // owed by the maximum volume at index [4]. Five REALs per constraint.
+ // Note that each regional attribute is used only if you select the `A'
+ // switch, and each volume constraint is used only if you select the
+ // `a' switch (with no number following).
+ REAL *regionlist;
+ int numberofregions;
+
+ // `facetconstraintlist': An array of facet maximum area constraints.
+ // Two REALs per constraint. The first one is the facet marker (cast
+ // it to int), the second is its maximum area bound.
+ // Note the 'facetconstraintlist' is used only for the 'q' switch.
+ REAL *facetconstraintlist;
+ int numberoffacetconstraints;
+
+ // `segmentconstraintlist': An array of seg maximum length constraints.
+ // Three REALs per constraint. The first two are the indices (pointing
+ // into 'pointlist') of the endpoints of the segment, the third is its
+ // maximum length bound.
+ // Note the 'segmentconstraintlist' is used only for the 'q' switch.
+ REAL *segmentconstraintlist;
+ int numberofsegmentconstraints;
+
+ // `nodeconstraintlist': An array of segment length constraints. Two
+ // REALs per constraint. The first one is the index (pointing into
+ // 'pointlist') of the node, the second is its edge length bound.
+ // Note the 'nodeconstraintlist' is used only for the 'q' switch.
+ REAL *nodeconstraintlist;
+ int numberofnodeconstraints;
+
+ // 'pbcgrouplist': An array of periodic boundary condition groups.
+ pbcgroup *pbcgrouplist;
+ int numberofpbcgroups;
+
+ // `trifacelist': An array of triangular face endpoints. The first
+ // face's endpoints are at indices [0], [1] and [2], followed by the
+ // remaining faces. Three ints per face.
+ // `trifacemarkerlist': An array of face markers; one int per face.
+ int *trifacelist;
+ int *trifacemarkerlist;
+ int numberoftrifaces;
+
+ // `edgelist': An array of edge endpoints. The first edge's endpoints
+ // are at indices [0] and [1], followed by the remaining edges. Two
+ // ints per edge.
+ // `edgemarkerlist': An array of edge markers; one int per edge.
+ int *edgelist;
+ int *edgemarkerlist;
+ int numberofedges;
+
+ public:
+
+ // Initialize routine.
+ void initialize();
+ void deinitialize();
+
+ // Input & output routines.
+ bool load_node_call(FILE* infile, int markers, char* nodefilename);
+ bool load_node(char* filename);
+ bool load_addnodes(char* filename);
+ bool load_pbc(char* filename);
+ bool load_var(char* filename);
+ bool load_poly(char* filename);
+ bool load_off(char* filename);
+ bool load_ply(char* filename);
+ bool load_stl(char* filename);
+ bool load_medit(char* filename);
+ bool load_plc(char* filename, int object);
+ bool load_tetmesh(char* filename);
+ void save_nodes(char* filename);
+ void save_elements(char* filename);
+ void save_faces(char* filename);
+ void save_edges(char* filename);
+ void save_neighbors(char* filename);
+ void save_poly(char* filename);
+
+ // Read line and parse string functions.
+ char *readline(char* string, FILE* infile, int *linenumber);
+ char *findnextfield(char* string);
+ char *readnumberline(char* string, FILE* infile, char* infilename);
+ char *findnextnumber(char* string);
+
+ // Constructor and destructor.
+ tetgenio() {initialize();}
+ ~tetgenio() {deinitialize();}
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The tetgenbehavior data type //
+// //
+// Used to parse command line switches and file names. //
+// //
+// It includes a list of variables corresponding to the commandline switches //
+// for control the behavior of TetGen. These varibales are all initialized //
+// to their default values. //
+// //
+// Routine "parse_commandline()" defined in this data type is used to change //
+// the vaules of the variables. This routine accepts the standard parameters //
+// ('argc' and 'argv') that pass to C/C++ main() function. It also accepts a //
+// string which contains the command line options. //
+// //
+// You don't need to understand this data type. It can be implicitly called //
+// by the global function "tetrahedralize()" defined below. The necessary //
+// thing you need to know is the meaning of command line switches of TetGen. //
+// They are described in the third section of the user's manual. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+class tetgenbehavior {
+
+ public:
+
+ // Labels define the objects which are acceptable by TetGen. They are
+ // recognized by TetGen from the file extensions.
+ // - NODES, a list of nodes (.node);
+ // - POLY, a piecewise linear complex (.poly or .smesh);
+ // - OFF, a polyhedron (.off, Geomview's file format);
+ // - PLY, a polyhedron (.ply, file format from gatech);
+ // - STL, a surface mesh (.stl, stereolithography format);
+ // - MEDIT, a surface mesh (.mesh, Medit's file format);
+ // - MESH, a tetrahedral mesh (.ele).
+ // If no extension is available, the imposed commandline switch
+ // (-p or -r) implies the object.
+
+ enum objecttype {NONE, NODES, POLY, OFF, PLY, STL, MEDIT, MESH};
+
+ // Variables of command line switches. Each variable is corresponding
+ // to a specific switch and will be properly initialized. Read the
+ // user's manul to find out the meaning of these switches.
+
+ int plc; // '-p' switch, 0.
+ int refine; // '-r' switch, 0.
+ int quality; // '-q' switch, 0.
+ int varvolume; // '-a' switch without number, 0.
+ int fixedvolume; // '-a' switch with number, 0.
+ int insertaddpoints; // '-i' switch, 0.
+ int regionattrib; // '-A' switch, 0.
+ int detectinter; // '-d' switch, 0.
+ int zeroindex; // '-z' switch, 0.
+ int order; // element order, specified after '-o' switch, 1.
+ int facesout; // '-f' switch, 0.
+ int edgesout; // '-e' switch, 0.
+ int neighout; // '-n' switch, 0.
+ int meditview; // '-g' switch, 0.
+ int gidview; // '-G' switch, 0.
+ int geomview; // '-O' switch, 0.
+ int nobound; // '-B' switch, 0.
+ int nonodewritten; // '-N' switch, 0.
+ int noelewritten; // '-E' switch, 0.
+ int nofacewritten; // '-F' switch, 0.
+ int noiterationnum; // '-I' switch, 0.
+ int nomerge; // not merge two coplanar facets, '-M' switch, 0.
+ int nobisect; // count of how often '-Y' switch is selected, 0.
+ int noflip; // do not perform flips. '-Y' switch. 0.
+ int steiner; // number after '-S' switch. 0.
+ int dofullperturb; // do full permutation. '-P' switch, 0.
+ int dopermute; // do permutation. '-P' switch, 0.
+ int srandseed; // number of a random seed after '-P' switch, 1.
+ int docheck; // '-C' switch, 0.
+ int quiet; // '-Q' switch, 0.
+ int verbose; // count of how often '-V' switch is selected, 0.
+ int useshelles; // '-p', '-r', '-q', '-d', or '-c' switch, 0.
+ REAL minratio; // number after '-q' switch, 2.0.
+ REAL goodratio; // number calculated from 'minratio', 0.0.
+ REAL minangle; // minimum angle bound, 20.0.
+ REAL goodangle; // cosine squared of minangle, 0.0.
+ REAL maxvolume; // number after '-a' switch, -1.0.
+ REAL epsilon; // number after '-T' switch, 1.0e-8.
+ enum objecttype object; // determined by -p, or -r switch. NONE.
+
+ // Variables used to save command line switches and in/out file names.
+ char commandline[1024];
+ char infilename[1024];
+ char outfilename[1024];
+
+ tetgenbehavior();
+ ~tetgenbehavior() {}
+
+ void versioninfo();
+ void syntax();
+ void usage();
+
+ // Command line parse routine.
+ bool parse_commandline(int argc, char **argv);
+ bool parse_commandline(char *switches) {
+ return parse_commandline(0, &switches);
+ }
+};
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Geometric predicates //
+// //
+// Return one of the values +1, 0, and -1 on basic geometric questions such //
+// as the orientation of point sets, in-circle, and in-sphere tests. They //
+// are basic units for the composition of geometric algorithms. TetGen uses //
+// two 3D geometric predicates, which are the orientation test and the in- //
+// sphere test (e.g. the locally Deklaunay test). //
+// //
+// Orientation test: let a, b, c be a sequence of 3 non-collinear points in //
+// R^3. They defines a unique hypeplane H. Let H+ and H- be the two spaces //
+// separated by H, which are defined as follows (using the left-hand rule): //
+// make a fist using your left hand in such a way that your fingers follow //
+// the order of a, b and c, then your thumb is pointing to H+. Given any //
+// point d in R^3, the orientation test returns +1 if d lies in H+, -1 if d //
+// lies in H-, or 0 if d lies on H. //
+// //
+// In-sphere test: let a, b, c, d be 4 non-coplanar points in R^3. They //
+// defines a unique circumsphere S. Given any point e in R^3, the in-sphere //
+// test returns +1 if e lies inside S, or -1 if e lies outside S, or 0 if e //
+// lies on S. //
+// //
+// The correctness of geometric predicates is crucial for the control flow //
+// and hence for the correctness and robustness of an implementation of a //
+// geometric algorithm. The following routines use arbitrary precision //
+// floating-point arithmetic. They are fast and robust. It is provided by J. //
+// Schewchuk in public domain (http://www.cs.cmu.edu/~quake/robust.html). //
+// The source code are found in a separate file "predicates.cxx". //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+REAL exactinit();
+REAL orient3d(REAL *pa, REAL *pb, REAL *pc, REAL *pd);
+REAL insphere(REAL *pa, REAL *pb, REAL *pc, REAL *pd, REAL *pe);
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The tetgenmesh data type //
+// //
+// Includes data types and mesh routines for creating tetrahedral meshes and //
+// Delaunay tetrahedralizations, mesh input & output, and so on. //
+// //
+// An object of tetgenmesh can be used to store a triangular or tetrahedral //
+// mesh and its settings. TetGen's functions operates on one mesh each time. //
+// This type allows reusing of the same function for different meshes. //
+// //
+// The mesh data structure (tetrahedron-based and triangle-edge data struct- //
+// ures) are declared. There are other accessary data type defined as well, //
+// for efficient memory management and link list operations, etc. //
+// //
+// All algorithms TetGen used are implemented in this data type as member //
+// functions. References of these algorithms can be found in user's manual. //
+// //
+// It's not necessary to understand this type. There is a global function //
+// "tetrahedralize()" (defined at the end of this file) implicitly creates //
+// the object and calls its member functions according to the command line //
+// switches you specified. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+class tetgenmesh {
+
+ public:
+
+ // Maximum number of characters in a file name (including the null).
+ enum {FILENAMESIZE = 1024};
+
+ // For efficiency, a variety of data structures are allocated in bulk.
+ // The following constants determine how many of each structure is
+ // allocated at once.
+ enum {VERPERBLOCK = 4092, SUBPERBLOCK = 4092, ELEPERBLOCK = 8188};
+
+ // Used for the point location scheme of Mucke, Saias, and Zhu, to
+ // decide how large a random sample of tetrahedra to inspect.
+ enum {SAMPLEFACTOR = 11};
+
+ // Labels that signify two edge rings of a triangle defined in Muecke's
+ // triangle-edge data structure, one (CCW) traversing edges in count-
+ // erclockwise direction and one (CW) in clockwise direction.
+ enum {CCW = 0, CW = 1};
+
+ // Labels that signify whether a record consists primarily of pointers
+ // or of floating-point words. Used to make decisions about data
+ // alignment.
+ enum wordtype {POINTER, FLOATINGPOINT};
+
+ // Labels that signify the type of a vertex. An UNUSEDVERTEX is a vertex
+ // read from input (.node file or tetgenio structure) or an isolated
+ // vertex (outside the mesh). It is the default type for a newpoint.
+ enum verttype {UNUSEDVERTEX, DUPLICATEDVERTEX, NACUTEVERTEX, ACUTEVERTEX,
+ FREESEGVERTEX, FACETVERTEX, FREESUBVERTEX, FREEVOLVERTEX,
+ DEADVERTEX = -32768};
+
+ // Labels that signify the type of a subface. A subface is SHARPSUB if
+ // it is in a facet which forms an acute dihedral angle (less than 90
+ // degree with other facets). It is SKINNYSUB if it has two segments
+ // form a small angle (less than 10 degree).
+ enum shestype {NSHARPNSKINNY, SHARPSUB, SKINNYSUB, SHARPSKINNYSUB};
+
+ // Labels that signify the type of flips can be applied on a face.
+ // A flipable face has the one of the types T23, T32, T22, and T44.
+ // Types UNFLIPABLE, NONCONVEX are unflipable.
+ enum fliptype {T23, T32, T22, T44, UNFLIPABLE, FORBIDDENFACE,
+ FORBIDDENEDGE, NONCONVEX};
+
+ // Labels that signify the result of triangle-triangle intersection test.
+ // Two triangles are DISJOINT, or adjoint at a vertex SHAREVERTEX, or
+ // adjoint at an edge SHAREEDGE, or coincident SHAREFACE or INTERSECT.
+ enum interresult {DISJOINT, SHAREVERTEX, SHAREEDGE, SHAREFACE, INTERSECT};
+
+ // Labels that signify the result of point location. The result of a
+ // search indicates that the point falls inside a tetrahedron, inside
+ // a triangle, on an edge, on a vertex, or outside the mesh.
+ enum locateresult {INTETRAHEDRON, ONFACE, ONEDGE, ONVERTEX, OUTSIDE};
+
+ // Labels that signify the result of vertex insertion. The result
+ // indicates that the vertex was inserted with complete success, was
+ // inserted but encroaches upon a subsegment, was not inserted because
+ // it lies on a segment, or was not inserted because another vertex
+ // occupies the same location.
+ enum insertsiteresult {SUCCESSINTET, SUCCESSONFACE, SUCCESSONEDGE,
+ DUPLICATEPOINT, OUTSIDEPOINT};
+
+ // Labels that signify the result of direction finding. The result
+ // indicates that a segment connecting the two query points accross
+ // an edge of the direction triangle/tetrahedron, across a face of
+ // the direction tetrahedron, along the left edge of the direction
+ // triangle/tetrahedron, along the right edge of the direction
+ // triangle/tetrahedron, or along the top edge of the tetrahedron.
+ enum finddirectionresult {ACROSSEDGE, ACROSSFACE, LEFTCOLLINEAR,
+ RIGHTCOLLINEAR, TOPCOLLINEAR, BELOWHULL};
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The basic mesh element data structures //
+// //
+// There are four types of mesh elements: tetrahedra, subfaces, subsegments, //
+// and points, where subfaces and subsegments are triangles and edges which //
+// appear on boundaries. A tetrahedralization of a 3D point set comprises //
+// tetrahedra and points; a surface mesh of a 3D domain comprises subfaces //
+// subsegments and points. The elements of all the four types consist of a //
+// tetrahedral mesh of a 3D domain. However, TetGen uses three data types: //
+// 'tetrahedron', 'shellface', and 'point'. A 'tetrahedron' is a tetrahedron;//
+// while a 'shellface' can be either a subface or a subsegment; and a 'point'//
+// is a point. Theese three data types, linked by pointers comprise a mesh. //
+// //
+// A tetrahedron primarily consists of a list of 4 pointers to its corners, //
+// a list of 4 pointers to its adjoining tetrahedra, a list of 4 pointers to //
+// its adjoining subfaces (when subfaces are needed). Optinoally, (depending //
+// on the selected switches), it may contain an arbitrary number of user- //
+// defined floating-point attributes, an optional maximum volume constraint //
+// (for -a switch), and a pointer to a list of high-order nodes (-o2 switch).//
+// Since the size of a tetrahedron is not determined until running time, it //
+// is not simply declared as a structure. //
+// //
+// The data structure of tetrahedron also stores the geometrical information.//
+// Let t be a tetrahedron, v0, v1, v2, and v3 be the 4 nodes corresponding //
+// to the order of their storage in t. v3 always has a negative orientation //
+// with respect to v0, v1, v2 (ie,, v3 lies above the oriented plane passes //
+// through v0, v1, v2). Let the 4 faces of t be f0, f1, f2, and f3. Vertices //
+// of each face are stipulated as follows: f0 (v0, v1, v2), f1 (v0, v3, v1), //
+// f2 (v1, v3, v2), f3 (v2, v3, v0). //
+// //
+// A subface has 3 pointers to vertices, 3 pointers to adjoining subfaces, 3 //
+// pointers to adjoining subsegments, 2 pointers to adjoining tetrahedra, a //
+// boundary marker(an integer). Like a tetrahedron, the pointers to vertices,//
+// subfaces, and subsegments are ordered in a way that indicates their geom- //
+// etric relation. Let s be a subface, v0, v1 and v2 be the 3 nodes corres- //
+// ponding to the order of their storage in s, e0, e1 and e2 be the 3 edges,//
+// then we have: e0 (v0, v1), e1 (v1, v2), e2 (v2, v0). //
+// //
+// A subsegment has exactly the same data fields as a subface has, but only //
+// uses some of them. It has 2 pointers to its endpoints, 2 pointers to its //
+// adjoining (and collinear) subsegments, a pointer to a subface containing //
+// it (there may exist any number of subfaces having it, choose one of them //
+// arbitrarily). The geometric relation between its endpoints and adjoining //
+// subsegments is kept with respect to the storing order of its endpoints. //
+// //
+// The data structure of point is relatively simple. A point is a list of //
+// floating-point numbers, starting with the x, y, and z coords, followed by //
+// an arbitrary number of optional user-defined floating-point attributes, //
+// an integer boundary marker, an integer for the point type, and a pointer //
+// to a tetrahedron (used for speeding up point location). //
+// //
+// For a tetrahedron on a boundary (or a hull) of the mesh, some or all of //
+// the adjoining tetrahedra may not be present. For an interior tetrahedron, //
+// often no neighboring subfaces are present, Such absent tetrahedra and //
+// subfaces are never represented by the NULL pointers; they are represented //
+// by two special records: `dummytet', the tetrahedron fills "outer space", //
+// and `dummysh', the vacuous subfaces which are omnipresent. //
+// //
+// Tetrahedra and adjoining subfaces are glued together through the pointers //
+// saved in each data fields of them. Subfaces and adjoining subsegments are //
+// connected in the same fashion. However, there are no pointers directly //
+// gluing tetrahedra and adjoining subsegments. For the purpose of saving //
+// space, the connections between tetrahedra and subsegments are entirely //
+// mediated through subfaces. The following part explains how subfaces are //
+// connected in TetGen. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The subface-subface and subface-subsegment connections //
+// //
+// Adjoining subfaces sharing a common edge are connected in such a way that //
+// they form a face ring around the edge. It is in deed a single linked list //
+// which is cyclic, e.g., one can start from any subface in it and traverse //
+// back. When the edge is not a subsegment, the ring only has two coplanar //
+// subfaces which are pointing to each other. Otherwise, the face ring may //
+// have any number of subfaces (and are not all coplanar). //
+// //
+// How is the face ring formed? Let s be a subsegment, f is one of subfaces //
+// containing s as an edge. The direction of s is stipulated from its first //
+// endpoint to its second (according to their storage in s). Once the dir of //
+// s is determined, the other two edges of f are oriented to follow this dir.//
+// The "directional normal" N_f is a vector formed from any point in f and a //
+// points orthogonally above f. //
+// //
+// The face ring of s is a cyclic ordered set of subfaces containing s, i.e.,//
+// F(s) = {f1, f2, ..., fn}, n >= 1. Where the order is defined as follows: //
+// let fi, fj be two faces in F(s), the "normal-angle", NAngle(i,j) (range //
+// from 0 to 360 degree) is the angle between the N_fi and N_fj; then fi is //
+// in front of fj (or symbolically, fi < fj) if there exists another fk in //
+// F(s), and NAangle(k, i) < NAngle(k, j). The face ring of s is: f1 < f2 < //
+// ... < fn < f1. //
+// //
+// The easiest way to imagine how a face ring is formed is to use the right- //
+// hand rule. Make a fist using your right hand with the thumb pointing to //
+// the direction of the subsegment. The face ring is connected following the //
+// direction of your fingers. //
+// //
+// The subface and subsegment are also connected through pointers stored in //
+// their own data fields. Every subface has a pointer ti its adjoining sub- //
+// segment. However, a subsegment only has one pointer to a subface which is //
+// containing it. Such subface can be choosn arbitrarily, other subfaces are //
+// found through the face ring. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ // The tetrahedron data structure. Fields of a tetrahedron contains:
+ // - a list of four adjoining tetrahedra;
+ // - a list of four vertices;
+ // - a list of four subfaces (optional, used for -p switch);
+ // - a list of user-defined floating-point attributes (optional);
+ // - a volume constraint (optional, used for -a switch);
+ // - a pointer to a list of high-ordered nodes (optional, -o2 switch);
+
+ typedef REAL **tetrahedron;
+
+ // The shellface data structure. Fields of a shellface contains:
+ // - a list of three adjoining subfaces;
+ // - a list of three vertices;
+ // - a list of two adjoining tetrahedra;
+ // - a list of three adjoining subsegments;
+ // - a pointer to a badface containing it (used for -q);
+ // - an area constraint (optional, used for -q);
+ // - an integer for boundary marker;
+ // - an integer for type: SHARPSEGMENT, NONSHARPSEGMENT, ...;
+ // - an integer for pbc group (optional, if in->pbcgrouplist exists);
+
+ typedef REAL **shellface;
+
+ // The point data structure. It is actually an array of REALs:
+ // - x, y and z coordinates;
+ // - a list of user-defined point attributes (optional);
+ // - an edge length constraint (optional, used for -q);
+ // - a pointer to a simplex (tet, tri, edge, or vertex);
+ // - a pointer to a parent point (optional, used for -q);
+ // - a pointer to another pbc point (optional);
+ // - an integer for boundary marker;
+ // - an integer for verttype: INPUTVERTEX, FREEVERTEX, ...;
+
+ typedef REAL *point;
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The mesh handle (triface, face) data types //
+// //
+// Two special data types, 'triface' and 'face' are defined for maintaining //
+// and updating meshes. They are like pointers (or handles), which allow you //
+// to hold one particular part of the mesh, i.e., a tetrahedron, a triangle, //
+// an edge and a vertex. However, these data types do not themselves store //
+// any part of the mesh. The mesh is made of the data types defined above. //
+// //
+// Muecke's "triangle-edge" data structure is the prototype for these data //
+// types. It allows a universal representation for every tetrahedron, //
+// triangle, edge and vertex. For understanding the following descriptions //
+// of these handle data structures, readers are required to read both the //
+// introduction and implementation detail of "triangle-edge" data structure //
+// in Muecke's thesis. //
+// //
+// A 'triface' represents a face of a tetrahedron and an oriented edge of //
+// the face simultaneously. It has a pointer 'tet' to a tetrahedron, an //
+// integer 'loc' (range from 0 to 3) as the face index, and an integer 'ver' //
+// (range from 0 to 5) as the edge version. A face of the tetrahedron can be //
+// uniquly determined by the pair (tet, loc), and an oriented edge of this //
+// face can be uniquly determined by the triple (tet, loc, ver). Therefore, //
+// different usages of one triface are possible. If we only use the pair //
+// (tet, loc), it refers to a face, and if we add the 'ver' additionally to //
+// the pair, it is an oriented edge of this face. //
+// //
+// A 'face' represents a subface and an oriented edge of it simultaneously. //
+// It has a pointer 'sh' to a subface, an integer 'shver'(range from 0 to 5) //
+// as the edge version. The pair (sh, shver) determines a unique oriented //
+// edge of this subface. A 'face' is also used to represent a subsegment, //
+// in this case, 'sh' points to the subsegment, and 'shver' indicates the //
+// one of two orientations of this subsegment, hence, it only can be 0 or 1. //
+// //
+// Mesh navigation and updating are accomplished through a set of mesh //
+// manipulation primitives which operate on trifaces and faces. They are //
+// introduced below. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ class triface {
+
+ public:
+
+ tetrahedron* tet;
+ int loc, ver;
+
+ // Constructors;
+ triface() : tet(0), loc(0), ver(0) {}
+ // Operators;
+ triface& operator=(const triface& t) {
+ tet = t.tet; loc = t.loc; ver = t.ver;
+ return *this;
+ }
+ bool operator==(triface& t) {
+ return tet == t.tet && loc == t.loc && ver == t.ver;
+ }
+ bool operator!=(triface& t) {
+ return tet != t.tet || loc != t.loc || ver != t.ver;
+ }
+ };
+
+ class face {
+
+ public:
+
+ shellface *sh;
+ int shver;
+
+ // Constructors;
+ face() : sh(0), shver(0) {}
+ // Operators;
+ face& operator=(const face& s) {
+ sh = s.sh; shver = s.shver;
+ return *this;
+ }
+ bool operator==(face& s) {return (sh == s.sh) && (shver == s.shver);}
+ bool operator!=(face& s) {return (sh != s.sh) || (shver != s.shver);}
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The badface structure //
+// //
+// A multiple usages structure. Despite of its name, a 'badface' can be used //
+// to represent the following objects: //
+// - a face of a tetrahedron which is (possibly) non-Delaunay; //
+// - an encroached subsegment or subface; //
+// - a bad-quality tetrahedron, i.e, has too large radius-edge ratio; //
+// - a sliver, i.e., has good radius-edge ratio but nearly zero volume; //
+// - a degenerate tetrahedron (see routine checkdegetet()). //
+// - a recently flipped face (saved for undoing the flip later). //
+// //
+// It has the following fields: 'tt' holds a tetrahedron; 'ss' holds a sub- //
+// segment or subface; 'cent' is the circumcent of 'tt' or 'ss', 'key' is a //
+// special value depending on the use, it can be either the square of the //
+// radius-edge ratio of 'tt' or the flipped type of 'tt'; 'forg', 'fdest', //
+// 'fapex', and 'foppo' are vertices saved for checking the object in 'tt' //
+// or 'ss' is still the same when it was stored; 'noppo' is the fifth vertex //
+// of a degenerate point set. 'previtem' and 'nextitem' implement a double //
+// link for managing many basfaces. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ struct badface {
+ triface tt;
+ face ss;
+ REAL key;
+ REAL cent[3];
+ point forg, fdest, fapex, foppo;
+ point noppo;
+ struct badface *previtem, *nextitem;
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The pbcdata structure //
+// //
+// A pbcdata stores data of a periodic boundary condition defined on a pair //
+// of facets or segments. Let f1 and f2 define a pbcgroup. 'fmark' saves the //
+// facet markers of f1 and f2; 'ss' contains two subfaces belong to f1 and //
+// f2, respectively. Let s1 and s2 define a segment pbcgroup. 'segid' are //
+// the segment ids of s1 and s2; 'ss' contains two segments belong to s1 and //
+// s2, respectively. 'transmat' are two transformation matrices. transmat[0] //
+// transforms a point of f1 (or s1) into a point of f2 (or s2), transmat[1] //
+// does the inverse. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ struct pbcdata {
+ int fmark[2];
+ int segid[2];
+ face ss[2];
+ REAL transmat[2][4][4];
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// The list, link and queue data structures //
+// //
+// These data types are used to manipulate a set of (same-typed) data items. //
+// For a given set S = {a, b, c, ...}, a list stores the elements of S in a //
+// piece of continuous memory. It allows quickly accessing each element of S,//
+// thus is suitable for storing a fix-sized set. While a link stores its //
+// elements incontinuously. It allows quickly inserting or deleting an item, //
+// thus is suitable for storing a size-variable set. A queue is basically a //
+// special case of a link where one data element joins the link at the end //
+// and leaves in an ordered fashion at the other end. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ // The compfunc data type. "compfunc" is a pointer to a linear-order
+ // function, which takes two 'void*' arguments and returning an 'int'.
+ //
+ // A function: int cmp(const T &, const T &), is said to realize a
+ // linear order on the type T if there is a linear order <= on T such
+ // that for all x and y in T satisfy the following relation:
+ // -1 if x < y.
+ // comp(x, y) = 0 if x is equivalent to y.
+ // +1 if x > y.
+ typedef int (*compfunc) (const void *, const void *);
+
+ // The predefined compare functions for primitive data types. They
+ // take two pointers of the corresponding date type, perform the
+ // comparation, and return -1, 0 or 1 indicating the default linear
+ // order of them.
+
+ // Compare two 'integers'.
+ static int compare_2_ints(const void* x, const void* y);
+ // Compare two 'longs'.
+ static int compare_2_longs(const void* x, const void* y);
+ // Compare two 'unsigned longs'.
+ static int compare_2_unsignedlongs(const void* x, const void* y);
+
+ // The function used to determine the size of primitive data types and
+ // set the corresponding predefined linear order functions for them.
+ static void set_compfunc(char* str, int* itembytes, compfunc* pcomp);
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// List data structure. //
+// //
+// A 'list' is an array of items with automatically reallocation of memory. //
+// It behaves like an array. //
+// //
+// 'base' is the starting address of the array; The memory unit in list is //
+// byte, i.e., sizeof(char). 'itembytes' is the size of each item in byte, //
+// so that the next item in list will be found at the next 'itembytes' //
+// counted from the current position. //
+// //
+// 'items' is the number of items stored in list. 'maxitems' indicates how //
+// many items can be stored in this list. 'expandsize' is the increasing //
+// size (items) when the list is full. //
+// //
+// 'comp' is a pointer pointing to a linear order function for the list. //
+// default it is set to 'NULL'. //
+// //
+// The index of list always starts from zero, i.e., for a list L contains //
+// n elements, the first element is L[0], and the last element is L[n-1]. //
+// This feature lets lists likes C/C++ arrays. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ class list {
+
+ public:
+
+ char *base;
+ int itembytes;
+ int items, maxitems, expandsize;
+ compfunc comp;
+
+ public:
+
+ list(int itbytes, compfunc pcomp, int mitems = 256, int exsize = 128) {
+ listinit(itbytes, pcomp, mitems, exsize);
+ }
+ list(char* str, int mitems = 256, int exsize = 128) {
+ set_compfunc(str, &itembytes, &comp);
+ listinit(itembytes, comp, mitems, exsize);
+ }
+ ~list() { free(base); }
+
+ void *operator[](int i) { return (void *) (base + i * itembytes); }
+
+ void listinit(int itbytes, compfunc pcomp, int mitems, int exsize);
+ void setcomp(compfunc compf) { comp = compf; }
+ void clear() { items = 0; }
+ int len() { return items; }
+ void *append(void* appitem);
+ void *insert(int pos, void* insitem);
+ void del(int pos);
+ int hasitem(void* checkitem);
+ int remove(void* remitem);
+ void sort();
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Memorypool data structure. //
+// //
+// A type used to allocate memory. (It is incorporated from Shewchuk's //
+// Triangle program) //
+// //
+// firstblock is the first block of items. nowblock is the block from which //
+// items are currently being allocated. nextitem points to the next slab //
+// of free memory for an item. deaditemstack is the head of a linked list //
+// (stack) of deallocated items that can be recycled. unallocateditems is //
+// the number of items that remain to be allocated from nowblock. //
+// //
+// Traversal is the process of walking through the entire list of items, and //
+// is separate from allocation. Note that a traversal will visit items on //
+// the "deaditemstack" stack as well as live items. pathblock points to //
+// the block currently being traversed. pathitem points to the next item //
+// to be traversed. pathitemsleft is the number of items that remain to //
+// be traversed in pathblock. //
+// //
+// itemwordtype is set to POINTER or FLOATINGPOINT, and is used to suggest //
+// what sort of word the record is primarily made up of. alignbytes //
+// determines how new records should be aligned in memory. itembytes and //
+// itemwords are the length of a record in bytes (after rounding up) and //
+// words. itemsperblock is the number of items allocated at once in a //
+// single block. items is the number of currently allocated items. //
+// maxitems is the maximum number of items that have been allocated at //
+// once; it is the current number of items plus the number of records kept //
+// on deaditemstack. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ class memorypool {
+
+ public:
+
+ void **firstblock, **nowblock;
+ void *nextitem;
+ void *deaditemstack;
+ void **pathblock;
+ void *pathitem;
+ wordtype itemwordtype;
+ int alignbytes;
+ int itembytes, itemwords;
+ int itemsperblock;
+ long items, maxitems;
+ int unallocateditems;
+ int pathitemsleft;
+
+ public:
+
+ memorypool();
+ memorypool(int, int, enum wordtype, int);
+ ~memorypool();
+
+ void poolinit(int, int, enum wordtype, int);
+ void restart();
+ void *alloc();
+ void dealloc(void*);
+ void traversalinit();
+ void *traverse();
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Link data structure. //
+// //
+// A 'link' is a double linked nodes. It uses the memorypool data structure //
+// for memory management. Following is an image of a link. //
+// //
+// head-> ____0____ ____1____ ____2____ _________<-tail //
+// |__next___|--> |__next___|--> |__next___|--> |__NULL___| //
+// |__NULL___|<-- |__prev___|<-- |__prev___|<-- |__prev___| //
+// | | |_ _| |_ _| | | //
+// | | |_ Data1 _| |_ Data2 _| | | //
+// |_________| |_________| |_________| |_________| //
+// //
+// The unit size for storage is size of pointer, which may be 4-byte (in 32- //
+// bit machine) or 8-byte (in 64-bit machine). The real size of an item is //
+// stored in 'linkitembytes'. //
+// //
+// 'head' and 'tail' are pointers pointing to the first and last nodes. They //
+// do not conatin data (See above). //
+// //
+// 'nextlinkitem' is a pointer pointing to a node which is the next one will //
+// be traversed. 'curpos' remembers the position (1-based) of the current //
+// traversing node. //
+// //
+// 'linkitems' indicates how many items in link. Note it is different with //
+// 'items' of memorypool. //
+// //
+// The index of link starts from 1, i.e., for a link K contains n elements, //
+// the first element of the link is K[1], and the last element is K[n]. //
+// See the above figure. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ class link : public memorypool {
+
+ public:
+
+ void **head, **tail;
+ void *nextlinkitem;
+ int linkitembytes;
+ int linkitems;
+ int curpos;
+ compfunc comp;
+
+ public:
+
+ link(int _itembytes, compfunc _comp, int itemcount) {
+ linkinit(_itembytes, _comp, itemcount);
+ }
+ link(char* str, int itemcount) {
+ set_compfunc(str, &linkitembytes, &comp);
+ linkinit(linkitembytes, comp, itemcount);
+ }
+
+ void linkinit(int _itembytes, compfunc _comp, int itemcount);
+ void setcomp(compfunc compf) { comp = compf; }
+ void rewind() { nextlinkitem = *head; curpos = 1; }
+ void goend() { nextlinkitem = *(tail + 1); curpos = linkitems; }
+ long len() { return linkitems; }
+ void clear();
+ bool move(int numberofnodes);
+ bool locate(int pos);
+ void *add(void* newitem);
+ void *insert(int pos, void* insitem);
+ void *del(void* delitem);
+ void *del(int pos);
+ void *getitem();
+ void *getnitem(int pos);
+ int hasitem(void* checkitem);
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Queue data structure. //
+// //
+// A 'queue' is a basically a link. Following is an image of a queue. //
+// ___________ ___________ ___________ //
+// Pop() <-- |_ _|<--|_ _|<--|_ _| <-- Push() //
+// |_ Data0 _| |_ Data1 _| |_ Data2 _| //
+// |___________| |___________| |___________| //
+// queue head queue tail //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ class queue : public link {
+
+ public:
+
+ queue(int bytes, int count = 256) : link(bytes, NULL, count) {}
+ queue(char* str, int count = 256) : link(str, count) {}
+
+ int empty() { return linkitems == 0; }
+ void *push(void* newitem) { return link::add(newitem); }
+ void *bot() { return link::getnitem(1); }
+ void *pop() { return link::del(1); }
+ };
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Following are variables used in 'tetgenmesh' for miscellaneous purposes. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ // Pointer to an object of 'tetgenio', which contains input data.
+ tetgenio *in;
+
+ // Pointer to an object of 'tetgenbehavor', which contains the user-
+ // defined command line swithes and filenames.
+ tetgenbehavior *b;
+
+ // Variables used to allocate and access memory for tetrahedra, subfaces
+ // subsegments, points, encroached subfaces, encroached subsegments,
+ // bad-quality tetrahedra, and so on.
+ memorypool *tetrahedrons;
+ memorypool *subfaces;
+ memorypool *subsegs;
+ memorypool *points;
+ memorypool *badsubsegs;
+ memorypool *badsubfaces;
+ memorypool *badtetrahedrons;
+ memorypool *flipstackers;
+
+ // Pointer to the 'tetrahedron' that occupies all of "outer space".
+ tetrahedron *dummytet;
+ tetrahedron *dummytetbase; // Keep base address so we can free it later.
+
+ // Pointer to the omnipresent subface. Referenced by any tetrahedron,
+ // or subface that isn't connected to a subface at that location.
+ shellface *dummysh;
+ shellface *dummyshbase; // Keep base address so we can free it later.
+
+ // List of lifting points of facets used for surface triangulation.
+ REAL *liftpointarray;
+
+ // Array (size = numberoftetrahedra * 6) for storing high-order nodes of
+ // tetrahedra (only used when -o2 switch is selected).
+ point *highordertable;
+
+ // Two tables for storing pbc datas. 'subpbcgrouptable' is an array(size
+ // = numberofpbcgroups) for pbcgroup of subfaces.'segpbcgrouptable' is
+ // a list for pbcgroup of segments. Because a segment can have several
+ // pbcgroup incident on it, the size of 'segpbcgrouptable' is unknown
+ // on input, will be found after createsegpbcgrouptable(). Two lists
+ // form a map for quick searching the pbcgroups of a given segment.
+ // 'idx2segpglist' (size = number of input segments + 1), 'segpglist'.
+ pbcdata *subpbcgrouptable;
+ list *segpbcgrouptable;
+ int *idx2segpglist, *segpglist;
+
+ // List used in Delaunay refinement for keeping a list of tetrahedra
+ // which need to be classified in terms of the quality measure.
+ list *qualchecktetlist;
+
+ // Array used in Delaunay refinement for keeping the protecting sphere
+ // radii of the input vertices.
+ REAL *rpsarray;
+
+ // Queues that maintain the bad (badly-shaped or too large) tetrahedra.
+ // The tails are pointers to the pointers that have to be filled in to
+ // enqueue an item. The queues are ordered from 63 (highest priority)
+ // to 0 (lowest priority).
+ badface *subquefront[2], **subquetail[2];
+ badface *tetquefront[64], **tetquetail[64];
+
+ // Pointer to a recently visited tetrahedron. Improves point location
+ // if proximate points are inserted sequentially.
+ triface recenttet;
+
+ REAL xmax, xmin, ymax, ymin, zmax, zmin; // Bounding box of points.
+ REAL longest; // The longest possible edge length.
+ long hullsize; // Number of faces of convex hull.
+ long insegment; // Number of input segments.
+ int steinerleft; // Number of Steiner points not yet used.
+ int edgeboundindex; // Index to find edge bound of a point.
+ int pointmarkindex; // Index to find boundary marker of a point.
+ int point2simindex; // Index to find a simplex adjacent to a point.
+ int point2pbcptindex; // Index to find a pbc point to a point.
+ int highorderindex; // Index to find extra nodes for highorder elements.
+ int elemattribindex; // Index to find attributes of a tetrahedron.
+ int volumeboundindex; // Index to find volume bound of a tetrahedron.
+ int shmarkindex; // Index to find boundary marker of a subface.
+ int areaboundindex; // Index to find area bound of a subface.
+ int checksubfaces; // Are there subfaces in the mesh yet?
+ int checkpbcs; // Are there periodic boundary conditions?
+ int varconstraint; // Are there variant (node, seg, facet) constraints?
+ int nonconvex; // Is current mesh non-convex?
+ int dupverts; // Are there duplicated vertices?
+ int unuverts; // Are there unused vertices?
+ long samples; // Number of random samples for point location.
+ unsigned long randomseed; // Current random number seed.
+ REAL macheps; // The machine epsilon.
+ int maxcavfaces, maxcavverts; // The size of the largest cavity.
+ int enlcavtimes; // The times of enlarging cavitys.
+ long flip23s, flip32s, flip22s, flip44s; // Number of flips performed.
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Fast lookup tables for mesh manipulation primitives. //
+// //
+// Mesh manipulation primitives (given below) are basic operations on mesh //
+// data structures. They answer basic queries on mesh handles, such as "what //
+// is the origin (or destination, or apex) of the face?", "what is the next //
+// (or previous) edge in the edge ring?", and "what is the next face in the //
+// face ring?", and so on. //
+// //
+// The implementation of teste basic queries can take advangtage of the fact //
+// that the mesh data structures additionally store geometric informations. //
+// For example, we have ordered the 4 vertices (from 0 to 3) and the 4 faces //
+// (from 0 to 3) of a tetrahedron, and for each face of the tetrahedron, a //
+// sequence of vertices has stipulated, therefore the origin of any face of //
+// the tetrahedron can be quickly determined by a table 'locver2org', which //
+// takes the index of the face and the edge version as inputs. A list of //
+// fast lookup tables are defined below. They're just like global variables. //
+// These tables are initialized at the runtime. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ // For enext() primitive, uses 'ver' as the index.
+ static int ve[6];
+
+ // For org(), dest() and apex() primitives, uses 'ver' as the index.
+ static int vo[6], vd[6], va[6];
+
+ // For org(), dest() and apex() primitives, uses 'loc' as the first
+ // index and 'ver' as the second index.
+ static int locver2org[4][6];
+ static int locver2dest[4][6];
+ static int locver2apex[4][6];
+
+ // For oppo() primitives, uses 'loc' as the index.
+ static int loc2oppo[4];
+
+ // For fnext() primitives, uses 'loc' as the first index and 'ver' as
+ // the second index, returns an array containing a new 'loc' and a
+ // new 'ver'. Note: Only valid for 'ver' equals one of {0, 2, 4}.
+ static int locver2nextf[4][6][2];
+
+ // For enumerating three edges of a triangle.
+ static int plus1mod3[3];
+ static int minus1mod3[3];
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Mesh manipulation primitives //
+// //
+// A serial of mesh operations such as topological maintenance, navigation, //
+// local modification, etc., is accomplished through a set of mesh manipul- //
+// ation primitives. These primitives are indeed very simple functions which //
+// take one or two handles ('triface's and 'face's) as parameters, perform //
+// basic operations such as "glue two tetrahedra at a face", "return the //
+// origin of a tetrahedron", "return the subface adjoining at the face of a //
+// tetrahedron", and so on. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ // Primitives for tetrahedra.
+ inline void decode(tetrahedron ptr, triface& t);
+ inline tetrahedron encode(triface& t);
+ inline void sym(triface& t1, triface& t2);
+ inline void symself(triface& t);
+ inline void bond(triface& t1, triface& t2);
+ inline void dissolve(triface& t);
+ inline point org(triface& t);
+ inline point dest(triface& t);
+ inline point apex(triface& t);
+ inline point oppo(triface& t);
+ inline void setorg(triface& t, point pointptr);
+ inline void setdest(triface& t, point pointptr);
+ inline void setapex(triface& t, point pointptr);
+ inline void setoppo(triface& t, point pointptr);
+ inline void esym(triface& t1, triface& t2);
+ inline void esymself(triface& t);
+ inline void enext(triface& t1, triface& t2);
+ inline void enextself(triface& t);
+ inline void enext2(triface& t1, triface& t2);
+ inline void enext2self(triface& t);
+ inline bool fnext(triface& t1, triface& t2);
+ inline bool fnextself(triface& t);
+ inline void enextfnext(triface& t1, triface& t2);
+ inline void enextfnextself(triface& t);
+ inline void enext2fnext(triface& t1, triface& t2);
+ inline void enext2fnextself(triface& t);
+ inline void infect(triface& t);
+ inline void uninfect(triface& t);
+ inline bool infected(triface& t);
+ inline REAL elemattribute(tetrahedron* ptr, int attnum);
+ inline void setelemattribute(tetrahedron* ptr, int attnum, REAL value);
+ inline REAL volumebound(tetrahedron* ptr);
+ inline void setvolumebound(tetrahedron* ptr, REAL value);
+
+ // Primitives for subfaces and subsegments.
+ inline void sdecode(shellface sptr, face& s);
+ inline shellface sencode(face& s);
+ inline void spivot(face& s1, face& s2);
+ inline void spivotself(face& s);
+ inline void sbond(face& s1, face& s2);
+ inline void sbond1(face& s1, face& s2);
+ inline void sdissolve(face& s);
+ inline point sorg(face& s);
+ inline point sdest(face& s);
+ inline point sapex(face& s);
+ inline void setsorg(face& s, point pointptr);
+ inline void setsdest(face& s, point pointptr);
+ inline void setsapex(face& s, point pointptr);
+ inline void sesym(face& s1, face& s2);
+ inline void sesymself(face& s);
+ inline void senext(face& s1, face& s2);
+ inline void senextself(face& s);
+ inline void senext2(face& s1, face& s2);
+ inline void senext2self(face& s);
+ inline void sfnext(face&, face&);
+ inline void sfnextself(face&);
+ inline badface* shell2badface(face& s);
+ inline void setshell2badface(face& s, badface* value);
+ inline REAL areabound(face& s);
+ inline void setareabound(face& s, REAL value);
+ inline int shellmark(face& s);
+ inline void setshellmark(face& s, int value);
+ inline enum shestype shelltype(face& s);
+ inline void setshelltype(face& s, enum shestype value);
+ inline int shellpbcgroup(face& s);
+ inline void setshellpbcgroup(face& s, int value);
+ inline void sinfect(face& s);
+ inline void suninfect(face& s);
+ inline bool sinfected(face& s);
+
+ // Primitives for interacting tetrahedra and subfaces.
+ inline void tspivot(triface& t, face& s);
+ inline void stpivot(face& s, triface& t);
+ inline void tsbond(triface& t, face& s);
+ inline void tsdissolve(triface& t);
+ inline void stdissolve(face& s);
+
+ // Primitives for interacting subfaces and subsegs.
+ inline void sspivot(face& s, face& edge);
+ inline void ssbond(face& s, face& edge);
+ inline void ssdissolve(face& s);
+
+ // Primitives for points.
+ inline int pointmark(point pt);
+ inline void setpointmark(point pt, int value);
+ inline enum verttype pointtype(point pt);
+ inline void setpointtype(point pt, enum verttype value);
+ inline tetrahedron point2tet(point pt);
+ inline void setpoint2tet(point pt, tetrahedron value);
+ inline shellface point2sh(point pt);
+ inline void setpoint2sh(point pt, shellface value);
+ inline point point2pt(point pt);
+ inline void setpoint2pt(point pt, point value);
+ inline point point2ppt(point pt);
+ inline void setpoint2ppt(point pt, point value);
+ inline point point2pbcpt(point pt);
+ inline void setpoint2pbcpt(point pt, point value);
+ inline REAL edgebound(point pt);
+ inline void setedgebound(point pt, REAL value);
+ inline point getliftpoint(int facetmark);
+
+ // Advanced primitives.
+ inline void adjustedgering(triface& t, int direction);
+ inline void adjustedgering(face& s, int direction);
+ inline bool isdead(triface* t);
+ inline bool isdead(face* s);
+ inline bool isfacehaspoint(face* t, point testpoint);
+ inline bool isfacehasedge(face* s, point tend1, point tend2);
+ inline bool issymexist(triface* t);
+ bool getnextface(triface*, triface*);
+ void getnextsface(face*, face*);
+ void tsspivot(triface*, face*);
+ void sstpivot(face*, triface*);
+ bool findorg(triface* t, point dorg);
+ bool findorg(face* s, point dorg);
+ void findedge(triface* t, point eorg, point edest);
+ void findedge(face* s, point eorg, point edest);
+ void findface(triface *fface, point forg, point fdest, point fapex);
+ void getonextseg(face* s, face* lseg);
+ void getseghasorg(face* sseg, point dorg);
+ point getsubsegfarorg(face* sseg);
+ point getsubsegfardest(face* sseg);
+ void printtet(triface*);
+ void printsh(face*);
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Triangle-triangle intersection test //
+// //
+// The triangle-triangle intersection test is implemented with exact arithm- //
+// etic. It exactly tells whether or not two triangles in three dimensions //
+// intersect. Before implementing this test myself, I tried two C codes //
+// (implemented by Thomas Moeller and Philippe Guigue, respectively), which //
+// are all public available. However both of them failed frequently. Another //
+// unconvenience is both codes only tell whether or not the two triangles //
+// intersect without distinguishing the cases whether they exactly intersect //
+// in interior or they just share a vertex or share an edge. The two latter //
+// cases are acceptable and should return not intersection in TetGen. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ enum interresult edge_vert_col_inter(REAL*, REAL*, REAL*);
+ enum interresult edge_edge_cop_inter(REAL*, REAL*, REAL*, REAL*, REAL*);
+ enum interresult tri_vert_cop_inter(REAL*, REAL*, REAL*, REAL*, REAL*);
+ enum interresult tri_edge_cop_inter(REAL*, REAL*, REAL*, REAL*, REAL*,
+ REAL*);
+ enum interresult tri_edge_inter_tail(REAL*, REAL*, REAL*, REAL*, REAL*,
+ REAL, REAL);
+ enum interresult tri_edge_inter(REAL*, REAL*, REAL*, REAL*, REAL*);
+ enum interresult tri_tri_inter(REAL*, REAL*, REAL*, REAL*, REAL*, REAL*);
+
+ // Degenerate cases tests
+ bool iscollinear(REAL*, REAL*, REAL*, REAL eps);
+ bool iscoplanar(REAL*, REAL*, REAL*, REAL*, REAL vol6, REAL eps);
+ bool iscospheric(REAL*, REAL*, REAL*, REAL*, REAL*, REAL vol24, REAL eps);
+
+ // Linear algebra functions
+ inline REAL dot(REAL* v1, REAL* v2);
+ inline void cross(REAL* v1, REAL* v2, REAL* n);
+ void initm44(REAL a00, REAL a01, REAL a02, REAL a03,
+ REAL a10, REAL a11, REAL a12, REAL a13,
+ REAL a20, REAL a21, REAL a22, REAL a23,
+ REAL a30, REAL a31, REAL a32, REAL a33, REAL M[4][4]);
+ void m4xm4(REAL m1[4][4], REAL m2[4][4]);
+ void m4xv4(REAL v2[4], REAL m[4][4], REAL v1[4]);
+ bool lu_decmp(REAL lu[4][4], int n, int* ps, REAL* d, int N);
+ void lu_solve(REAL lu[4][4], int n, int* ps, REAL* b, int N);
+
+ // Geometric quantities calculators.
+ inline REAL distance(REAL* p1, REAL* p2);
+ REAL shortdistance(REAL* p, REAL* e1, REAL* e2);
+ REAL interiorangle(REAL* o, REAL* p1, REAL* p2, REAL* n);
+ void projpt2edge(REAL* p, REAL* e1, REAL* e2, REAL* prj);
+ void projpt2face(REAL* p, REAL* f1, REAL* f2, REAL* f3, REAL* prj);
+ void facenormal(REAL* pa, REAL* pb, REAL* pc, REAL* n, REAL* nlen);
+ void edgeorthonormal(REAL* e1, REAL* e2, REAL* op, REAL* n);
+ REAL facedihedral(REAL* pa, REAL* pb, REAL* pc1, REAL* pc2);
+ void tetalldihedral(point, point, point, point, REAL dihed[6]);
+ bool circumsphere(REAL*, REAL*, REAL*, REAL*, REAL* cent, REAL* radius);
+ void inscribedsphere(REAL*, REAL*, REAL*, REAL*, REAL* cent, REAL* radius);
+ void rotatepoint(REAL* p, REAL rotangle, REAL* p1, REAL* p2);
+ void spherelineint(REAL* p1, REAL* p2, REAL* C, REAL R, REAL p[7]);
+ void linelineint(REAL *p1,REAL *p2, REAL *p3, REAL *p4, REAL p[7]);
+
+ // Memory managment routines.
+ void dummyinit(int, int);
+ void initializepools();
+ void tetrahedrondealloc(tetrahedron*);
+ tetrahedron *tetrahedrontraverse();
+ void shellfacedealloc(memorypool*, shellface*);
+ shellface *shellfacetraverse(memorypool*);
+ void badfacedealloc(memorypool*, badface*);
+ badface *badfacetraverse(memorypool*);
+ void pointdealloc(point);
+ point pointtraverse();
+ void maketetrahedron(triface*);
+ void makeshellface(memorypool*, face*);
+ void makepoint(point*);
+
+ // Mesh items searching routines.
+ void makepoint2tetmap();
+ void makeindex2pointmap(point*& idx2verlist);
+ void makesegmentmap(int*& idx2seglist, shellface**& segsperverlist);
+ void makesubfacemap(int*& idx2facelist, shellface**& facesperverlist);
+ void maketetrahedronmap(int*& idx2tetlist, tetrahedron**& tetsperverlist);
+
+ // Point location routines.
+ unsigned long randomnation(unsigned int choices);
+ REAL distance2(tetrahedron* tetptr, point p);
+ enum locateresult preciselocate(point searchpt, triface* searchtet);
+ enum locateresult locate(point searchpt, triface* searchtet);
+ enum locateresult adjustlocate(point searchpt, triface* searchtet,
+ enum locateresult precise, REAL epspp);
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// Mesh Local Transformation Operators //
+// //
+// These operators (including flips, insert & remove vertices and so on) are //
+// used to transform (or replace) a set of mesh elements into another set of //
+// mesh elements. //
+// //
+// Flip Types //
+// //
+// If abc is a hull face, it is unflipable, and is locally Delaunay. In the //
+// following, we assume abc is an interior face, and the other tetrahedron //
+// adjoining at abc is bace. //
+// //
+// If the convex hull CH of the set {a, b, c, d, e} only has four vertices, //
+// i.e., one vertex lies inside CH, then abc is unflipable, and is locally //
+// Delaunay. If CH is the vertex set itself, we have the following cases to //
+// determine whether abc is flipable or not. //
+// //
+// If no four points of {a, b, c, d, e} are coplanar, a 2-to-3 flip can be //
+// applied to abc if the edge de crosses the triangle abc; a 3-to-2 flip can //
+// be applied to abc if ab crosses cde, and abde exists, otherwise, face abc //
+// is unflipable, i.e., the tetrahedron abde is not present. //
+// //
+// If four points of {a, b, c, d, e} are coplanar (two faces are coplanar). //
+// Assume faces abd and abe are coplanar (it is impossible be abc). If a, b, //
+// d, e form a non-convex quadrilateral, then abc is unflipable, furthermore,//
+// it is locally Delaunay. Assume they are convex quadrilateral, if abd and //
+// abe are hull faces, a 2-to-2 flip can be applied to abc; if abd and abe //
+// are interior faces, assume two tetrahedra adjoining abd and abe at the //
+// opposite sides are abdg and abef, respectively. If g = f, a 4-to-4 flip //
+// can be applied to abc, otherwise, abc is unflipable. //
+// //
+// There are other cases which can cause abc unflipable. If abc is a subface,//
+// a 2-to-3 flip is forbidden; if ab is a subsegment, flips 3-to-2, 2-to-2, //
+// and 4-to-4 are forbidden. //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+ // Mesh transformation routines.
+ enum fliptype categorizeface(triface& horiz);
+ void enqueueflipface(triface& checkface, queue* flipqueue);
+ void enqueueflipedge(face& checkedge, queue* flipqueue);
+ void flip23(triface* flipface, queue* flipqueue);
+ void flip32(triface* flipface, queue* flipqueue);
+ void flip22(triface* flipface, queue* flipqueue);
+ void flip22sub(face* flipedge, queue* flipqueue);
+ long flip(queue* flipqueue, badface **plastflip, bool, bool, bool);
+ void undoflip(badface *lastflip);
+
+ void splittetrahedron(point newpoint, triface* splittet, queue* flipqueue);
+ void unsplittetrahedron(triface* splittet);
+ void splittetface(point newpoint, triface* splittet, queue* flipqueue);
+ void unsplittetface(triface* splittet);
+ void splitsubface(point newpoint, face* splitface, queue* flipqueue);
+ void unsplitsubface(face* splitsh);
+ void splittetedge(point newpoint, triface* splittet, queue* flipqueue);
+ void unsplittetedge(triface* splittet);
+ void splitsubedge(point newpoint, face* splitsh, queue* flipqueue);
+ void unsplitsubedge(face* splitsh);
+ enum insertsiteresult insertsite(point newpoint, triface* searchtet,
+ bool approx, queue* flipqueue);
+ void undosite(enum insertsiteresult insresult, triface* splittet,
+ point torg, point tdest, point tapex, point toppo);
+ void inserthullsite(point inspoint, triface* horiz, queue* flipqueue,
+ link* hulllink, int* worklist);
+ void collectcavtets(point newpoint, list* cavtetlist);
+ void collectcavsubs(point newpoint, list* cavsublist);
+
+ // Incremental flip Delaunay triangulation routines.
+ void incrflipinit(queue* insertqueue);
+ void mergepoints(point testpt, triface* starttet, link*, int*);
+ long incrflipdelaunay();
+
+ // Surface triangulation routines.
+ enum locateresult locatesub(point searchpt, face* searchsh, int stopatseg);
+ enum locateresult adjustlocatesub(point searchpt, face* searchsh,
+ enum locateresult precise, REAL epspp);
+ long flipsub(queue* flipqueue);
+ bool incrflipinitsub(int facetidx, list* ptlist, point* idx2verlist);
+ void collectvisiblesubs(int facetidx, point inspoint, face* horiz,
+ queue* flipqueue);
+ void incrflipdelaunaysub(int facetidx, list* ptlist, point* idx2verlist,
+ queue* flipqueue);
+ enum finddirectionresult finddirectionsub(face* searchsh, point tend);
+ void insertsubseg(face* tri);
+ bool scoutsegmentsub(face* searchsh, point tend);
+ void delaunayfixup(face* fixupsh, int leftside);
+ void constrainededge(face* startsh, point tend);
+ void insertsegmentsub(point tstart, point tend);
+ void infecthullsub(memorypool* viri);
+ void plaguesub(memorypool* viri);
+ void carveholessub(int holes, REAL* holelist);
+ void triangulatefacet(int facetidx, list* ptlist, list* conlist,
+ point* idx2verlist, queue* flipqueue);
+ void unifysegments();
+ void mergefacets(queue* flipqueue);
+ void assignvarconstraints(point *idx2verlist);
+ long meshsurface();
+
+ // Detect intersecting facets of PLC.
+ void interecursive(shellface** subfacearray, int arraysize, int axis,
+ REAL bxmin, REAL bxmax, REAL bymin, REAL bymax,
+ REAL bzmin, REAL bzmax, int* internum);
+ void detectinterfaces();
+
+ // Periodic boundary condition supporting routines.
+ void createsubpbcgrouptable();
+ void getsubpbcgroup(face* pbcsub, pbcdata** pd, int *f1, int *f2);
+ enum locateresult getsubpbcsympoint(point newpoint, face* splitsub,
+ point sympoint, face* symsplitsub);
+ void createsegpbcgrouptable();
+ enum locateresult locateseg(point searchpt, face* searchseg);
+ enum locateresult adjustlocateseg(point searchpt, face* searchseg,
+ enum locateresult precise, REAL epspp);
+ enum locateresult getsegpbcsympoint(point newpoint, face* splitseg,
+ point sympoint, face* symsplitseg,
+ int groupid);
+
+ // Vertex perturbation routines.
+ REAL randgenerator(REAL range);
+ bool checksub4cocir(face* testsub, REAL eps, bool once, bool enqflag);
+ bool checktet4cosph(triface* testtet, REAL eps, bool once, bool enqflag);
+ void tallcocirsubs(REAL eps, bool enqflag);
+ void tallcosphtets(list* testtetlist, REAL eps, bool enqflag);
+ bool tallencsegsfsubs(point testpt, list* cavsublist);
+ bool tallencsubsfsubs(point testpt, list* cavtetlist);
+ void collectflipedges(point inspoint, face* splitseg, queue* flipqueue);
+ void perturbrepairencsegs(queue* flipqueue);
+ void perturbrepairencsubs(REAL eps, list* cavsublist, queue* flipqueue);
+ void perturbrepairbadtets(REAL eps, list* cavsublist, list* cavtetlist,
+ queue* flipqueue);
+ void incrperturbvertices(REAL eps);
+
+ // Segment recovery routines.
+ void markacutevertices(REAL acuteangle);
+ enum finddirectionresult finddirection(triface* searchtet, point tend);
+ void getsearchtet(point p1, point p2, triface* searchtet, point* tend);
+ bool isedgeencroached(point p1, point p2, point testpt, bool degflag);
+ point scoutrefpoint(triface* searchtet, point tend);
+ point getsegmentorigin(face* splitseg);
+ point getsplitpoint(face* splitseg, point refpoint);
+ void delaunizesegments();
+
+ // Facets recovery routines.
+ bool insertsubface(face* insertsh, triface* searchtet);
+ bool tritritest(triface* checktet, point p1, point p2, point p3);
+ void initializecavity(list* floorlist, list* ceillist, link* frontlink);
+ void delaunizevertices(list* floorptlist, list* ceilptlist,
+ link* newtetlink, int* worklist);
+ void identifyfronts(link* frontlink, link* newtetlink, link* newfrontlink,
+ list* missceillist);
+ void classifynewtets(link* frontlink, link* newtetlink,
+ link* newfrontlink);
+ void carvecavity(link* newtetlink, list* newtetlist);
+ void delaunizecavity(list* floorlist, list* ceillist, list* floorptlist,
+ list* ceilptlist, list* newtetlist,
+ list* missceillist, int* worklist);
+ void formmissingregion(face* missingsh, list* missingshlist,
+ list* equatptlist, int* worklist);
+ bool scoutcrossingedge(list* missingshlist, list* boundedgelist,
+ list* crossedgelist, int* worklist);
+ void rearrangesubfaces(list* missingshlist, list* boundedgelist,
+ list* equatptlist, int* worklist);
+ void formcavity(list* missingshlist, list* crossedgelist,
+ list* equatptlist, list* crossshlist, list* crosstetlist,
+ list* belowfacelist, list* abovefacelist,
+ list* horizptlist, list* belowptlist, list* aboveptlist,
+ queue* missingshqueue, int* worklist);
+ void enlargecavity(list* missceillist, list* ceillist, list* ceilptlist,
+ list* floorptlist, list* crosstetlist,
+ queue* missingshqueue, int* worklist);
+ void insertallsubfaces(queue* missingshqueue);
+ void constrainedfacets();
+
+ // Carving out holes and concavities routines.
+ void infecthull(memorypool *viri);
+ void plague(memorypool *viri);
+ void regionplague(memorypool *viri, REAL attribute, REAL volume);
+ void removeholetets(memorypool *viri);
+ void carveholes();
+
+ // Mesh reconstruction rotuines.
+ long reconstructmesh();
+ void insertaddpoints();
+
+ // Mesh repair routines.
+ bool checktet4dege(triface* testtet, list* degetetlist);
+ bool finddiagonal(triface* akite);
+ void removetetbypeeloff(triface *badtet, queue* flipqueue);
+ void removetetbyflip32(triface *badtet, queue* flipqueue);
+ bool removekite(triface* akite, queue* flipqueue);
+ void talldegetets(list* degetetlist);
+ void repairdegetets();
+
+ // Delaunay refinement routines.
+ void initializerpsarray();
+ void marksharpsubfaces(REAL dihedbound);
+ void markskinnysubfaces(REAL anglebound);
+ badface* dequeuebadtet();
+ bool checkseg4encroach(face* testseg, point testpt, point*, bool enqflag);
+ bool checksub4encroach(face* testsub, point testpt, bool enqflag);
+ bool checkseg4badqual(face* testseg, bool enqflag);
+ bool checksub4badqual(face* testsub, bool enqflag);
+ bool checktet4badqual(triface* testtet, bool enqflag);
+ bool checktet4sliver(triface* testtet, bool enqflag);
+ bool checkseg4splitting(face* testseg, point* pencpt);
+ bool checksub4splitting(face* testsub, bool bqual);
+ bool tallencsegs(point testpt, list *cavtetlist);
+ bool tallencsubs(point testpt, list *cavtetlist);
+ void tallencsubsfseg(face* testseg);
+ void tallbadsegs();
+ void tallbadsubs();
+ void tallbadtetrahedrons();
+ void tallslivers();
+ void doqualchecktetlist();
+ void getsplitpoint1(face* splitseg, REAL* splitpt, point encpt);
+ void repairencsegs(queue* flipqueue);
+ void repairencsubs(list* cavtetlist, queue* flipqueue);
+ void repairbadtets(list* cavtetlist, queue* flipqueue);
+ void repairslivers(list* cavtetlist, queue* flipqueue);
+ void enforcequality();
+
+ // I/O routines
+ void transfernodes();
+ void jettisonnodes();
+ void highorder();
+ void outnodes(tetgenio* out);
+ void outelements(tetgenio* out);
+ void outfaces(tetgenio* out);
+ void outhullfaces(tetgenio* out);
+ void outsubfaces(tetgenio* out);
+ void outsubsegments(tetgenio* out);
+ void outneighbors(tetgenio* out);
+ void outpbcnodes(tetgenio* out);
+ void outsmesh(char* smfilename);
+ void outmesh2medit(char* mfilename);
+ void outmesh2gid(char* gfilename);
+ void outmesh2off(char* ofilename);
+
+ // User interaction routines.
+ void internalerror();
+ void checkmesh();
+ void checkshells();
+ void checkdelaunay(REAL eps, queue* flipqueue);
+ void checkdegeneracy(REAL eps);
+ void checkconforming();
+ void qualitystatistics();
+ void statistics();
+
+ public:
+
+ // Constructor and destructor.
+ tetgenmesh();
+ ~tetgenmesh();
+
+}; // End of class tetgenmesh.
+
+///////////////////////////////////////////////////////////////////////////////
+// //
+// tetrahedralize() Interface for using TetGen's library to generate //
+// Delaunay tetrahedralizations, constrained Delaunay //
+// tetrahedralizations, quality tetrahedral meshes. //
+// //
+// Two functions (interfaces) are available. The difference is only the way //
+// of passing switches. One directly accepts an object of 'tetgenbehavior', //
+// while the other accepts a string which is the same as one can used in the //
+// command line. The latter may be more convenient for users who don't want //
+// to kown the 'tetgenbehavir' structure. //
+// //
+// 'in' is an object of 'tetgenio' which contains a PLC you want to tetrahed-//
+// ralize or a previously generated tetrahedral mesh you want to refine. It //
+// must not be a NULL. 'out' is another object of 'tetgenio' for storing the //
+// generated tetrahedral mesh. It can be a NULL. If so, the output will be //
+// saved to file(s). //
+// //
+///////////////////////////////////////////////////////////////////////////////
+
+void tetrahedralize(tetgenbehavior *b, tetgenio *in, tetgenio *out);
+void tetrahedralize(char *switches, tetgenio *in, tetgenio *out);
+
+#endif // #ifndef tetgenH