Commit b1b9d09c by Christophe Geuzaine

these test-cases should be rewritten

parent 1a908da3
Pipeline #764 failed with stage
in 34 minutes 56 seconds
lc = 0.1;
Mesh.RemeshParametrization=1; //(0) harmonic (1) conformal
Mesh.RemeshAlgorithm=1; //(0) nosplit (1) automatic (2) split only with metis ///Default: 1
General.MeshDiscrete=1;
Merge "CubeAniso2D.msh";
CreateTopology;
Compound Surface(106) = {6}; //, 15};
Compound Surface(115) = {15};
Compound Surface(119) = {19};
Compound Surface(123) = {23};
Compound Surface(127) = {27};
Compound Surface(128) = {28};
Surface Loop(100) = {106, 115, 119,123,127,128};
Surface Loop(100) = {6, 15, 19, 23, 27, 28};
Volume(1) = {100};
Field[2] = MathEvalAniso;
......
Mesh.RemeshParametrization=1; //(0) harmonic (1) conformal
Mesh.RemeshAlgorithm=1; //(0) nosplit (1) automatic (2) split metis
Point(1) = {0, 0, 0};
Point(2) = {1, 0, 0};
......@@ -13,7 +11,3 @@ Circle(4) = {5, 1, 3};
Extrude {0, 0, 13} {
Line{4, 1, 2, 3};
}
Compound Surface(10000) = {20, 16, 12, 8};
General.MeshDiscrete = 1;
Merge "aorta2.stl";
CreateTopology;
//Merge "aortaRADIUS2.bgm";
//Line Loop(60) = {1}; Plane Surface(61) = {60};
//Line Loop(62) = {2}; Plane Surface(63) = {62};
//Line Loop(64) = {3}; Plane Surface(65) = {64};
//Line Loop(66) = {4}; Plane Surface(67) = {66};
//Line Loop(68) = {5}; Plane Surface(69) = {68};
Line Loop(60) = {1}; Plane Surface(61) = {60};
Line Loop(62) = {2}; Plane Surface(63) = {62};
Line Loop(64) = {3}; Plane Surface(65) = {64};
Line Loop(66) = {4}; Plane Surface(67) = {66};
Line Loop(68) = {5}; Plane Surface(69) = {68};
//Mesh.Algorithm3D = 4;
Mesh.Algorithm3D = 4;
Surface Loop(100) = {1, 61:69:2};
Volume(100) = 100;
//Surface Loop(100) = {1, 61:69:2};
//Volume(100) = 100;
General.MeshDiscrete = 1;
Merge "aorta2.stl";
CreateTopology;
Merge "aortaRADIUS2.bgm";
// create a boundary layer, whose tickness is given in View[0]
out1[] = Extrude{Surface{-1}; Layers{4, 0.5}; Using Index[0]; Using View[0]; };
//out1[] = Extrude{Surface{-1}; Layers{4, 0.5}; Using Index[0]; Using View[0]; };
// we could create a second boundary layer inside...
//out2[] = Extrude{Surface{1}; Layers{4, -0.5}; Using Index[1]; Using View[0]; };
/*
Line Loop(60) = {1}; Plane Surface(61) = {60};
Line Loop(62) = {2}; Plane Surface(63) = {62};
Line Loop(64) = {3}; Plane Surface(65) = {64};
......@@ -19,3 +19,4 @@ Mesh.Algorithm3D = 4;
Surface Loop(100) = {1, 61:69:2};
Volume(100) = 100;
*/
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment