DefaultOptions.h 96.4 KB
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444 1445 1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468 1469 1470 1471 1472 1473 1474 1475 1476 1477 1478 1479 1480 1481 1482 1483 1484 1485 1486 1487 1488 1489 1490 1491 1492 1493 1494 1495 1496 1497 1498 1499 1500 1501 1502 1503 1504 1505 1506 1507 1508 1509 1510 1511 1512 1513 1514 1515 1516 1517 1518 1519 1520 1521 1522 1523 1524 1525 1526 1527 1528 1529 1530 1531 1532 1533 1534 1535 1536 1537 1538 1539 1540 1541 1542 1543 1544 1545 1546 1547 1548 1549 1550 1551 1552 1553 1554 1555 1556 1557 1558 1559 1560 1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574 1575 1576 1577 1578 1579 1580 1581 1582 1583 1584 1585 1586 1587 1588 1589 1590 1591 1592 1593 1594 1595 1596 1597 1598 1599 1600 1601 1602 1603 1604 1605 1606 1607 1608 1609 1610 1611 1612 1613 1614 1615 1616 1617 1618 1619 1620 1621 1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635 1636 1637 1638 1639 1640 1641 1642 1643 1644 1645 1646 1647 1648 1649 1650 1651 1652 1653 1654 1655 1656 1657 1658 1659 1660 1661 1662 1663 1664 1665 1666 1667 1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686 1687 1688 1689 1690 1691 1692 1693 1694 1695 1696 1697 1698 1699 1700 1701 1702 1703 1704 1705 1706 1707 1708 1709 1710 1711 1712 1713 1714 1715 1716 1717 1718 1719 1720 1721 1722 1723 1724 1725 1726 1727 1728 1729 1730 1731 1732 1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750 1751 1752 1753 1754 1755 1756 1757 1758 1759 1760 1761 1762 1763 1764 1765 1766 1767 1768 1769 1770 1771 1772 1773 1774 1775 1776 1777 1778 1779 1780 1781 1782 1783 1784 1785 1786 1787 1788 1789 1790 1791 1792 1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821 1822 1823 1824 1825 1826 1827 1828 1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839 1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871 1872 1873 1874 1875 1876 1877 1878 1879 1880 1881 1882 1883 1884 1885 1886 1887 1888 1889 1890 1891 1892 1893 1894 1895 1896 1897 1898 1899 1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918 1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932 1933 1934 1935 1936 1937 1938 1939 1940 1941 1942 1943 1944 1945 1946 1947 1948 1949 1950 1951 1952 1953 1954 1955 1956 1957 1958 1959 1960 1961 1962 1963 1964 1965 1966 1967 1968 1969 1970 1971 1972 1973 1974 1975 1976 1977 1978 1979 1980 1981 1982 1983 1984 1985 1986 1987 1988 1989 1990 1991 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010
// Gmsh - Copyright (C) 1997-2017 C. Geuzaine, J.-F. Remacle
//
// See the LICENSE.txt file for license information. Please report all
// bugs and problems to the public mailing list <gmsh@onelab.info>.

#ifndef _DEFAULT_OPTIONS_H_
#define _DEFAULT_OPTIONS_H_

#include "GmshConfig.h"
#include "GmshDefines.h"
#include "Options.h"

//          PLEASE RESPECT THE ALPHABETICAL ORDER WHEN
//                    INSERTING A NEW OPTION!
//
// Option Database (General, Geometry, Mesh, Post, View, Print), with
// default values. The first number defines the level of saving: O
// for the option file, S for the session file and F for the full
// listing:

#define S GMSH_SESSIONRC
#define O GMSH_OPTIONSRC
#define F GMSH_FULLRC

// STRINGS

StringXString GeneralOptions_String[] = {
  { F|O, "AxesFormatX" , opt_general_axes_format0 , "%.3g" ,
    "Number format for X-axis (in standard C form)" },
  { F|O, "AxesFormatY" , opt_general_axes_format1 , "%.3g" ,
    "Number format for Y-axis (in standard C form)" },
  { F|O, "AxesFormatZ" , opt_general_axes_format2 , "%.3g" ,
    "Number format for Z-axis (in standard C form)" },
  { F|O, "AxesLabelX" , opt_general_axes_label0 , "" ,
    "X-axis label" },
  { F|O, "AxesLabelY" , opt_general_axes_label1 , "" ,
    "Y-axis label" },
  { F|O, "AxesLabelZ" , opt_general_axes_label2 , "" ,
    "Z-axis label" },

  { F|O, "BackgroundImageFileName" , opt_general_background_image_filename , "" ,
    "Background image file in JPEG, PNG or PDF format" },

  { F|O, "DefaultFileName" , opt_general_default_filename , "untitled.geo" ,
    "Default project file name" },
  { F,   "Display" , opt_general_display , "" ,
    "X server to use (only for Unix versions)" },

  { F|O, "ErrorFileName" , opt_general_error_filename ,
#if defined(WIN32)
    "gmsh-errors" ,
#else
    ".gmsh-errors" ,
#endif
    "File into which the log is saved if a fatal error occurs" },
  { F|S, "ExecutableFileName", opt_general_executable_filename , "" ,
    "File name of the Gmsh executable (read-only)"},

  { F,   "FileName" , opt_general_filename , "" ,
    "Current project file name (read-only)" },
  { F|S, "FltkTheme" , opt_general_gui_theme , "" ,
    "FLTK user interface theme (try e.g. plastic or gtk+)" },

  { F|O, "GraphicsFont" , opt_general_graphics_font , "Helvetica" ,
    "Font used in the graphic window" },
  { F|O, "GraphicsFontEngine" , opt_general_graphics_font_engine , "Native" ,
    "Set graphics font engine (Native, Cairo)" },
  { F|O, "GraphicsFontTitle" , opt_general_graphics_font_title , "Helvetica" ,
    "Font used in the graphic window for titles" },

  { F|S, "OptionsFileName" , opt_general_options_filename ,
#if defined(WIN32)
    "gmsh-options" ,
#else
    ".gmsh-options" ,
#endif
    "Option file created with `Tools->Options->Save'; automatically read on startup" },

  { F|S, "RecentFile0", opt_general_recent_file0 , "untitled.geo" ,
    "Most recent opened file"},
  { F|S, "RecentFile1", opt_general_recent_file1 , "untitled.geo" ,
    "2nd most recent opened file"},
  { F|S, "RecentFile2", opt_general_recent_file2 , "untitled.geo" ,
    "3rd most recent opened file"},
  { F|S, "RecentFile3", opt_general_recent_file3 , "untitled.geo" ,
    "4th most recent opened file"},
  { F|S, "RecentFile4", opt_general_recent_file4 , "untitled.geo" ,
    "5th most recent opened file"},
  { F|S, "RecentFile5", opt_general_recent_file5 , "untitled.geo" ,
    "6th most recent opened file"},
  { F|S, "RecentFile6", opt_general_recent_file6 , "untitled.geo" ,
    "7th most recent opened file"},
  { F|S, "RecentFile7", opt_general_recent_file7 , "untitled.geo" ,
    "8th most recent opened file"},
  { F|S, "RecentFile8", opt_general_recent_file8 , "untitled.geo" ,
    "9th most recent opened file"},
  { F|S, "RecentFile9", opt_general_recent_file9 , "untitled.geo" ,
    "10th most recent opened file"},

  { 0,   "SessionFileName" , opt_general_session_filename ,
#if defined(WIN32)
    "gmshrc" ,
#else
    ".gmshrc" ,
#endif
    "Option file into which session specific information is saved; automatically "
    "read on startup" },

  { F|O, "TextEditor" , opt_general_editor ,
#if defined(WIN32)
    "notepad.exe %s" ,
#elif defined(__APPLE__)
    "open -t %s" ,
#else
    "gedit %s" ,
#endif
    "System command to launch a text editor" },
  { F|S, "TmpFileName" , opt_general_tmp_filename ,
#if defined(WIN32)
    "gmsh-tmp" ,
#else
    ".gmsh-tmp" ,
#endif
    "Temporary file used by the geometry module" },

  { F, "WatchFilePattern", opt_general_watch_file_pattern , "" ,
     "Pattern of files to merge as they become available"},

   { 0, 0 , 0 , "" , 0 }
} ;

StringXString GeometryOptions_String[] = {
  { F|O, "DoubleClickedPointCommand" , opt_geometry_double_clicked_point_command, "" ,
    "Command parsed when double-clicking on a point" },
  { F|O, "DoubleClickedLineCommand" , opt_geometry_double_clicked_line_command, "" ,
    "Command parsed when double-clicking on a line" },
  { F|O, "DoubleClickedSurfaceCommand" , opt_geometry_double_clicked_surface_command, "" ,
    "Command parsed when double-clicking on a surface" },
  { F|O, "DoubleClickedVolumeCommand" , opt_geometry_double_clicked_volume_command, "" ,
    "Command parsed when double-clicking on a volume" },

  { 0, 0 , 0 , "" , 0 }
} ;

StringXString MeshOptions_String[] = {
  { 0, 0 , 0 , "" , 0 }
} ;

StringXString SolverOptions_String[] = {
  { F|S, "Executable0" , opt_solver_executable0 , "",
    "System command to launch solver 0" },
  { F|S, "Executable1" , opt_solver_executable1 , "" ,
    "System command to launch solver 1" },
  { F|S, "Executable2" , opt_solver_executable2 , "" ,
    "System command to launch solver 2" },
  { F|S, "Executable3" , opt_solver_executable3 , "" ,
    "System command to launch solver 3" },
  { F|S, "Executable4" , opt_solver_executable4 , "" ,
    "System command to launch solver 4" },
  { F|S, "Executable5" , opt_solver_executable5 , "",
    "System command to launch solver 5" },
  { F|S, "Executable6" , opt_solver_executable6 , "" ,
    "System command to launch solver 6" },
  { F|S, "Executable7" , opt_solver_executable7 , "" ,
    "System command to launch solver 7" },
  { F|S, "Executable8" , opt_solver_executable8 , "" ,
    "System command to launch solver 8" },
  { F|S, "Executable9" , opt_solver_executable9 , "" ,
    "System command to launch solver 9" },

  { F|S, "Name0" , opt_solver_name0 , "GetDP" ,
    "Name of solver 0" },
  { F|S, "Name1" , opt_solver_name1 , "" ,
    "Name of solver 1" },
  { F|S, "Name2" , opt_solver_name2 , "" ,
    "Name of solver 2" },
  { F|S, "Name3" , opt_solver_name3 , "" ,
    "Name of solver 3" },
  { F|S, "Name4" , opt_solver_name4 , "" ,
    "Name of solver 4" },
  { F|S, "Name5" , opt_solver_name5 , "" ,
    "Name of solver 5" },
  { F|S, "Name6" , opt_solver_name6 , "" ,
    "Name of solver 6" },
  { F|S, "Name7" , opt_solver_name7 , "" ,
    "Name of solver 7" },
  { F|S, "Name8" , opt_solver_name8 , "" ,
    "Name of solver 8" },
  { F|S, "Name9" , opt_solver_name9 , "" ,
    "Name of solver 9" },

  { F|S, "Extension0" , opt_solver_extension0 , ".pro" ,
    "File extension for solver 0" },
  { F|S, "Extension1" , opt_solver_extension1 , "" ,
    "File extension for solver 1" },
  { F|S, "Extension2" , opt_solver_extension2 , "" ,
    "File extension for solver 2" },
  { F|S, "Extension3" , opt_solver_extension3 , "" ,
    "File extension for solver 3" },
  { F|S, "Extension4" , opt_solver_extension4 , "" ,
    "File extension for solver 4" },
  { F|S, "Extension5" , opt_solver_extension5 , "" ,
    "File extension for solver 5" },
  { F|S, "Extension6" , opt_solver_extension6 , "" ,
    "File extension for solver 6" },
  { F|S, "Extension7" , opt_solver_extension7 , "" ,
    "File extension for solver 7" },
  { F|S, "Extension8" , opt_solver_extension8 , "" ,
    "File extension for solver 8" },
  { F|S, "Extension9" , opt_solver_extension9 , "" ,
    "File extension for solver 9" },

  { F|S, "OctaveInterpreter" , opt_solver_octave_interpreter , "octave" ,
    "Name of the Octave interpreter (used to run .m files)" },
  { F|S, "PythonInterpreter" , opt_solver_python_interpreter , "python" ,
    "Name of the Python interpreter (used to run .py files if they are not executable)" },

  { F|S, "RemoteLogin0" , opt_solver_remote_login0 , "",
    "Command to login to a remote host to launch solver 0" },
  { F|S, "RemoteLogin1" , opt_solver_remote_login1 , "" ,
    "Command to login to a remote host to launch solver 1" },
  { F|S, "RemoteLogin2" , opt_solver_remote_login2 , "" ,
    "Command to login to a remote host to launch solver 2" },
  { F|S, "RemoteLogin3" , opt_solver_remote_login3 , "" ,
    "Command to login to a remote host to launch solver 3" },
  { F|S, "RemoteLogin4" , opt_solver_remote_login4 , "" ,
    "Command to login to a remote host to launch solver 4" },
  { F|S, "RemoteLogin5" , opt_solver_remote_login5 , "",
    "Command to login to a remote host to launch solver 5" },
  { F|S, "RemoteLogin6" , opt_solver_remote_login6 , "" ,
    "Command to login to a remote host to launch solver 6" },
  { F|S, "RemoteLogin7" , opt_solver_remote_login7 , "" ,
    "Command to login to a remote host to launch solver 7" },
  { F|S, "RemoteLogin8" , opt_solver_remote_login8 , "" ,
    "Command to login to a remote host to launch solver 8" },
  { F|S, "RemoteLogin9" , opt_solver_remote_login9 , "" ,
    "Command to login to a remote host to launch solver 9" },

  { F|O, "SocketName" , opt_solver_socket_name ,
#if defined(WIN32) && !defined(__CYGWIN__)
    "127.0.0.1:0" , // use TCP/IP sockets by default on Windows
#else
    ".gmshsock" , // otherwise use Unix sockets by default
#endif
    "Base name of socket (UNIX socket if the name does not contain a colon, TCP/IP "
    "otherwise, in the form 'host:baseport'; the actual name/port is constructed "
    "by appending the unique client id. If baseport is 0 or is not provided, the "
    "port is chosen automatically (recommended))"},

  { 0, 0 , 0 , "" , 0 }
} ;

StringXString PostProcessingOptions_String[] = {
  { F|O, "DoubleClickedGraphPointCommand" , opt_post_double_clicked_graph_point_command, "" ,
    "Command parsed when double-clicking on a graph data point "
    "(e.g. Merge Sprintf('file_%g.pos', PostProcessing.GraphPointX);)" },

  { F|O, "GraphPointCommand" , opt_post_double_clicked_graph_point_command, "" ,
    "Synonym for `DoubleClickedGraphPointCommand'" },

  { 0, 0 , 0 , "" , 0 }
} ;

StringXString ViewOptions_String[] = {
  { F|O, "Attributes" , opt_view_attributes , "" ,
    "Optional string attributes" },
  { F|O, "AxesFormatX" , opt_view_axes_format0 , "%.3g" ,
    "Number format for X-axis (in standard C form)" },
  { F|O, "AxesFormatY" , opt_view_axes_format1 , "%.3g" ,
    "Number format for Y-axis (in standard C form)" },
  { F|O, "AxesFormatZ" , opt_view_axes_format2 , "%.3g" ,
    "Number format for Z-axis (in standard C form)" },
  { F|O, "AxesLabelX" , opt_view_axes_label0 , "" ,
    "X-axis label" },
  { F|O, "AxesLabelY" , opt_view_axes_label1 , "" ,
    "Y-axis label" },
  { F|O, "AxesLabelZ" , opt_view_axes_label2 , "" ,
    "Z-axis label" },

  { F|O, "DoubleClickedCommand" , opt_view_double_clicked_command , "" ,
    "Command parsed when double-clicking on the view" },

  { F,   "FileName" , opt_view_filename , "" ,
    "Default post-processing view file name" },
  { F|O, "Format" , opt_view_format , "%.3g" ,
    "Number format (in standard C form)" },

  { F|O, "GeneralizedRaiseX" , opt_view_gen_raise0 , "v0" ,
    "Generalized elevation of the view along X-axis (in model coordinates, "
    "using formula possibly containing x, y, z, s[tep], t[ime], v0, ... v8)" },
  { F|O, "GeneralizedRaiseY" , opt_view_gen_raise1 , "v1" ,
    "Generalized elevation of the view along Y-axis (in model coordinates, "
    "using formula possibly containing x, y, z, s[tep], t[ime], v0, ... v8)" },
  { F|O, "GeneralizedRaiseZ" , opt_view_gen_raise2 , "v2" ,
    "Generalized elevation of the view along Z-axis (in model coordinates, "
    "using formula possibly containing x, y, z, s[tep], t[ime], v0, ... v8)" },
  { F|O, "Group" , opt_view_group , "" ,
    "Group to which this view belongs" },

  { F,   "Name" , opt_view_name , "" ,
    "Default post-processing view name" },

  { F|O, "Stipple0" , opt_view_stipple0 , "1*0x1F1F" ,
    "First stippling pattern" },
  { F|O, "Stipple1" , opt_view_stipple1 , "1*0x3333" ,
    "Second stippling pattern" },
  { F|O, "Stipple2" , opt_view_stipple2 , "1*0x087F" ,
    "Third stippling pattern" },
  { F|O, "Stipple3" , opt_view_stipple3 , "1*0xCCCF" ,
    "Fourth stippling pattern" },
  { F|O, "Stipple4" , opt_view_stipple4 , "2*0x1111" ,
    "Fifth stippling pattern" },
  { F|O, "Stipple5" , opt_view_stipple5 , "2*0x0F0F" ,
    "Sixth stippling pattern" },
  { F|O, "Stipple6" , opt_view_stipple6 , "1*0xCFFF" ,
    "Seventh stippling pattern" },
  { F|O, "Stipple7" , opt_view_stipple7 , "2*0x0202" ,
    "Eighth stippling pattern" },
  { F|O, "Stipple8" , opt_view_stipple8 , "2*0x087F" ,
    "Ninth stippling pattern" },
  { F|O, "Stipple9" , opt_view_stipple9 , "1*0xFFFF" ,
    "Tenth stippling pattern" },

  { 0, 0 , 0 , "" , 0 }
} ;

StringXString PrintOptions_String[] = {
  { F|O, "ParameterCommand" , opt_print_parameter_command ,
    "Mesh.Clip=1; View.Clip=1; General.ClipWholeElements=1; "
    "General.Clip0D=Print.Parameter; SetChanged;" ,
    "Command parsed when the print parameter is changed" },

  { 0, 0 , 0 , "" , 0 }
} ;

// NUMBERS

StringXNumber GeneralOptions_Number[] = {
  { F|O, "AlphaBlending" , opt_general_alpha_blending , 1. ,
    "Enable alpha blending (transparency) in post-processing views" },
  { F|O, "Antialiasing" , opt_general_antialiasing , 0. ,
    "Use multisample antialiasing (will slow down rendering)" },
  { F|O, "ArrowHeadRadius" , opt_general_arrow_head_radius , 0.12 ,
    "Relative radius of arrow head" },
  { F|O, "ArrowStemLength" , opt_general_arrow_stem_length , 0.56 ,
    "Relative length of arrow stem" },
  { F|O, "ArrowStemRadius" , opt_general_arrow_stem_radius , 0.02 ,
    "Relative radius of arrow stem" },
  { F|O, "Axes" , opt_general_axes , 0. ,
    "Axes (0=none, 1=simple axes, 2=box, 3=full grid, 4=open grid, 5=ruler)" },
  { F|O, "AxesMikado" , opt_general_axes_mikado , 0. ,
    "Mikado axes style" },
  { F|O, "AxesAutoPosition" , opt_general_axes_auto_position , 1. ,
    "Position the axes automatically" },
  { F|O, "AxesForceValue" , opt_general_axes_force_value , 0. ,
    "Force values on axes (otherwise use natural coordinates)" },
  { F|O, "AxesMaxX" , opt_general_axes_xmax , 1. ,
    "Maximum X-axis coordinate" },
  { F|O, "AxesMaxY" , opt_general_axes_ymax , 1. ,
    "Maximum Y-axis coordinate" },
  { F|O, "AxesMaxZ" , opt_general_axes_zmax , 1. ,
    "Maximum Z-axis coordinate" },
  { F|O, "AxesMinX" , opt_general_axes_xmin , 0. ,
    "Minimum X-axis coordinate" },
  { F|O, "AxesMinY" , opt_general_axes_ymin , 0. ,
    "Minimum Y-axis coordinate" },
  { F|O, "AxesMinZ" , opt_general_axes_zmin , 0. ,
    "Minimum Z-axis coordinate" },
  { F|O, "AxesTicsX" , opt_general_axes_tics0 , 5. ,
    "Number of tics on the X-axis" },
  { F|O, "AxesTicsY" , opt_general_axes_tics1 , 5. ,
    "Number of tics on the Y-axis" },
  { F|O, "AxesTicsZ" , opt_general_axes_tics2 , 5. ,
    "Number of tics on the Z-axis" },
  { F|O, "AxesValueMaxX" , opt_general_axes_value_xmax , 1. ,
    "Maximum X-axis forced value" },
  { F|O, "AxesValueMaxY" , opt_general_axes_value_ymax , 1. ,
    "Maximum Y-axis forced value" },
  { F|O, "AxesValueMaxZ" , opt_general_axes_value_zmax , 1. ,
    "Maximum Z-axis forced value" },
  { F|O, "AxesValueMinX" , opt_general_axes_value_xmin , 0. ,
    "Minimum X-axis forced value" },
  { F|O, "AxesValueMinY" , opt_general_axes_value_ymin , 0. ,
    "Minimum Y-axis forced value" },
  { F|O, "AxesValueMinZ" , opt_general_axes_value_zmin , 0. ,
    "Minimum Z-axis forced value" },

  { F|O, "BackgroundGradient" , opt_general_background_gradient , 1. ,
    "Draw background gradient (0=none, 1=vertical, 2=horizontal, 3=radial)" },
  { F|O, "BackgroundImage3D" , opt_general_background_image_3d , 0 ,
    "Create background image in the 3D model (units = model units) or as "
    "2D background (units = pixels)" },
  { F|O, "BackgroundImagePage" , opt_general_background_image_page , 0 ,
    "Page to render in the background image (for multi-page PDFs)" },
  { F|O, "BackgroundImagePositionX" , opt_general_background_image_position0 , 0 ,
    "X position of background image (for 2D background: < 0: measure from right window edge; "
    ">= 1e5: centered)" },
  { F|O, "BackgroundImagePositionY" , opt_general_background_image_position1 , 0 ,
    "Y position of background image (for 2D background: < 0: measure from bottom window edge; "
    ">= 1e5: centered)" },
  { F|O, "BackgroundImageWidth" , opt_general_background_image_size0 , -1. ,
    "Width of background image (0: actual width if height = 0, natural scaling if not; "
    "-1: graphic window width)" },
  { F|O, "BackgroundImageHeight" , opt_general_background_image_size1 , -1 ,
    "Height of background image (0: actual height if width = 0, natural scaling if not; "
    "-1: graphic window height)" },
  { F|O, "BoundingBoxSize" , opt_general_lc, 1. ,
    "Overall bounding box size (read-only)" },

  { F|O, "Camera" , opt_general_camera_mode, 0. ,
    "Enable camera view mode" },
  { F|O, "CameraAperture" , opt_general_camera_aperture, 40. ,
    "Camera aperture in degrees" },
  { F|O, "CameraEyeSeparationRatio" , opt_general_eye_sep_ratio, 1.5 ,
    "Eye separation ratio in % for stereo rendering" },
  { F|O, "CameraFocalLengthRatio" , opt_general_focallength_ratio, 1.0 ,
    "Camera Focal length ratio" },
  { F,   "Clip0A" , opt_general_clip0a , 1.0 ,
    "First coefficient in equation for clipping plane 0 (`A' in `AX+BY+CZ+D=0')" },
  { F,   "Clip0B" , opt_general_clip0b , 0.0 ,
    "Second coefficient in equation for clipping plane 0 (`B' in `AX+BY+CZ+D=0')" },
  { F,   "Clip0C" , opt_general_clip0c , 0.0 ,
    "Third coefficient in equation for clipping plane 0 (`C' in `AX+BY+CZ+D=0')" },
  { F,   "Clip0D" , opt_general_clip0d , 0.0 ,
    "Fourth coefficient in equation for clipping plane 0 (`D' in `AX+BY+CZ+D=0')" },
  { F,   "Clip1A" , opt_general_clip1a , 0.0 ,
    "First coefficient in equation for clipping plane 1" },
  { F,   "Clip1B" , opt_general_clip1b , 1.0 ,
    "Second coefficient in equation for clipping plane 1" },
  { F,   "Clip1C" , opt_general_clip1c , 0.0 ,
    "Third coefficient in equation for clipping plane 1" },
  { F,   "Clip1D" , opt_general_clip1d , 0.0 ,
    "Fourth coefficient in equation for clipping plane 1" },
  { F,   "Clip2A" , opt_general_clip2a , 0.0 ,
    "First coefficient in equation for clipping plane 2" },
  { F,   "Clip2B" , opt_general_clip2b , 0.0 ,
    "Second coefficient in equation for clipping plane 2" },
  { F,   "Clip2C" , opt_general_clip2c , 1.0 ,
    "Third coefficient in equation for clipping plane 2" },
  { F,   "Clip2D" , opt_general_clip2d , 0.0 ,
    "Fourth coefficient in equation for clipping plane 2" },
  { F,   "Clip3A" , opt_general_clip3a , -1.0 ,
    "First coefficient in equation for clipping plane 3" },
  { F,   "Clip3B" , opt_general_clip3b , 0.0 ,
    "Second coefficient in equation for clipping plane 3" },
  { F,   "Clip3C" , opt_general_clip3c , 0.0 ,
    "Third coefficient in equation for clipping plane 3" },
  { F,   "Clip3D" , opt_general_clip3d , 1.0 ,
    "Fourth coefficient in equation for clipping plane 3" },
  { F,   "Clip4A" , opt_general_clip4a , 0.0 ,
    "First coefficient in equation for clipping plane 4" },
  { F,   "Clip4B" , opt_general_clip4b , -1.0 ,
    "Second coefficient in equation for clipping plane 4" },
  { F,   "Clip4C" , opt_general_clip4c , 0.0 ,
    "Third coefficient in equation for clipping plane 4" },
  { F,   "Clip4D" , opt_general_clip4d , 1.0 ,
    "Fourth coefficient in equation for clipping plane 4" },
  { F,   "Clip5A" , opt_general_clip5a , 0.0 ,
    "First coefficient in equation for clipping plane 5" },
  { F,   "Clip5B" , opt_general_clip5b , 0.0 ,
    "Second coefficient in equation for clipping plane 5" },
  { F,   "Clip5C" , opt_general_clip5c , -1.0 ,
    "Third coefficient in equation for clipping plane 5" },
  { F,   "Clip5D" , opt_general_clip5d , 1.0 ,
    "Fourth coefficient in equation for clipping plane 5" },
  { F,   "ClipFactor" , opt_general_clip_factor , 5.0 ,
    "Near and far clipping plane distance factor (decrease value for better "
    "z-buffer resolution)" },
  { F|O, "ClipOnlyDrawIntersectingVolume" ,
    opt_general_clip_only_draw_intersecting_volume , 0. ,
    "Only draw layer of elements that intersect the clipping plane" },
  { F|O, "ClipOnlyVolume" , opt_general_clip_only_volume , 0. ,
    "Only clip volume elements" },
  { F|S, "ClipPositionX" , opt_general_clip_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the clipping "
    "planes window" },
  { F|S, "ClipPositionY" , opt_general_clip_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the clipping "
    "planes window" },
  { F|O, "ClipWholeElements" , opt_general_clip_whole_elements , 0. ,
    "Clip whole elements" },
  { F|S, "ColorScheme", opt_general_color_scheme , 1. ,
    "Default color scheme for graphics (0=dark, 1=light, 2=grayscale, 3=reverse)" },
  { F|O, "ConfirmOverwrite" , opt_general_confirm_overwrite, 1. ,
    "Ask confirmation before overwriting files?" },
  { F|S, "ContextPositionX" , opt_general_context_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the contextual "
    "windows" },
  { F|S, "ContextPositionY" , opt_general_context_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the contextual "
    "windows" },

  { F|S, "DetachedMenu" , opt_general_detached_menu , 0. ,
    "Should the menu window be detached from the graphic window?" },
  { F|O, "DisplayBorderFactor" , opt_general_display_border_factor , 0.2 ,
    "Border factor for model display (0: model fits window size exactly)" },
  { F|O, "DoubleBuffer" , opt_general_double_buffer , 1. ,
    "Use a double buffered graphic window (on Unix, should be set to 0 when "
    "working on a remote host without GLX)" },
  { F|O, "DrawBoundingBoxes" , opt_general_draw_bounding_box, 0. ,
    "Draw bounding boxes" },

  { F|O, "ExpertMode" , opt_general_expert_mode, 0. ,
    "Enable expert mode (to disable all the messages meant for inexperienced "
    "users)" },
  { F|S, "ExtraPositionX" , opt_general_extra_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the generic extra window" },
  { F|S, "ExtraPositionY" , opt_general_extra_position1 , 350. ,
    "Vertical position (in pixels) of the upper left corner of the generic extra window" },
  { F|S, "ExtraHeight" , opt_general_extra_size1 , 100. ,
    "Height (in pixels) of the generic extra window" },
  { F|S, "ExtraWidth" , opt_general_extra_size0 , 100. ,
    "Width (in pixels) of the generic extra window" },

 { F|O, "FastRedraw" , opt_general_fast_redraw, 0. ,
    "Draw simplified model while rotating, panning and zooming" },
  { F|S, "FieldPositionX" , opt_general_field_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the field window" },
  { F|S, "FieldPositionY" , opt_general_field_position1 , 550. ,
    "Vertical position (in pixels) of the upper left corner of the field window" },
  { F|S, "FieldHeight" , opt_general_field_size1 , 320. ,
    "Height (in pixels) of the field window" },
  { F|S, "FieldWidth" , opt_general_field_size0 , 420. ,
    "Width (in pixels) of the field window" },
  { F|S, "FileChooserPositionX" , opt_general_file_chooser_position0 , 200. ,
    "Horizontal position (in pixels) of the upper left corner of the file chooser "
    "windows" },
  { F|S, "FileChooserPositionY" , opt_general_file_chooser_position1 , 200. ,
    "Vertical position (in pixels) of the upper left corner of the file chooser "
    "windows" },
  { F|S, "FltkColorScheme" , opt_general_gui_color_scheme , 0. ,
    "FLTK user interface color theme (0: standard, 1:dark)" },
  { F|O, "FontSize" , opt_general_fontsize , -1. ,
    "Size of the font in the user interface, in pixels (-1: automatic)" },

  { F|O, "GraphicsFontSize" , opt_general_graphics_fontsize , 15. ,
    "Size of the font in the graphic window, in pixels" },
  { F|O, "GraphicsFontSizeTitle" , opt_general_graphics_fontsize_title , 18. ,
    "Size of the font in the graphic window for titles, in pixels" },
  { F|S, "GraphicsHeight" , opt_general_graphics_size1 , 600. ,
    "Height (in pixels) of the graphic window" },
  { F|S, "GraphicsPositionX" , opt_general_graphics_position0 , 50. ,
    "Horizontal position (in pixels) of the upper left corner of the graphic "
    "window" },
  { F|S, "GraphicsPositionY" , opt_general_graphics_position1 , 50. ,
    "Vertical position (in pixels) of the upper left corner of the graphic "
    "window" },
  { F|S, "GraphicsWidth" , opt_general_graphics_size0 , 800. ,
    "Width (in pixels) of the graphic window" },

  { F|S, "HighOrderToolsPositionX" , opt_general_hot_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the high order "
    "tools window" },
  { F|S, "HighOrderToolsPositionY" , opt_general_hot_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the high order "
    "tools window" },
  { F|O, "HighResolutionGraphics" , opt_general_high_resolution_graphics , 1. ,
    "Use high-resolution OpenGL graphics (e.g. for Macs with retina displays)" },
  { F|O, "HighResolutionPointSizeFactor" , opt_general_high_resolution_point_size_factor , 2. ,
    "Point size factor when using high-resolution OpenGL graphics" },

  { F|O, "InitialModule", opt_general_initial_context, 0. ,
    "Module launched on startup (0=automatic, 1=geometry, 2=mesh, 3=solver, "
    "4=post-processing) " },

  { F|O, "Light0" , opt_general_light0 , 1. ,
    "Enable light source 0" },
  { F|O, "Light0X" , opt_general_light00 , 0.65 ,
    "X position of light source 0" },
  { F|O, "Light0Y" , opt_general_light01 , 0.65 ,
    "Y position of light source 0" },
  { F|O, "Light0Z" , opt_general_light02 , 1.0 ,
    "Z position of light source 0" },
  { F|O, "Light0W" , opt_general_light03 , 0.0 ,
    "Divisor of the X, Y and Z coordinates of light source 0 (W=0 means "
    "infinitely far source)" },
  { F|O, "Light1" , opt_general_light1 , 0.,
    "Enable light source 1" },
  { F|O, "Light1X" , opt_general_light10 , 0.5 ,
    "X position of light source 1" },
  { F|O, "Light1Y" , opt_general_light11 , 0.3 ,
    "Y position of light source 1" },
  { F|O, "Light1Z" , opt_general_light12 , 1.0 ,
    "Z position of light source 1" },
  { F|O, "Light1W" , opt_general_light13 , 0.0 ,
    "Divisor of the X, Y and Z coordinates of light source 1 (W=0 means infinitely "
    "far source)" },
  { F|O, "Light2" , opt_general_light2 , 0.,
    "Enable light source 2" },
  { F|O, "Light2X" , opt_general_light20 , 0.5 ,
    "X position of light source 2" },
  { F|O, "Light2Y" , opt_general_light21 , 0.3 ,
    "Y position of light source 2" },
  { F|O, "Light2Z" , opt_general_light22 , 1.0 ,
    "Z position of light source 2" },
  { F|O, "Light2W" , opt_general_light23 , 0.0 ,
    "Divisor of the X, Y and Z coordinates of light source 2 (W=0 means infinitely "
    "far source)" },
  { F|O, "Light3" , opt_general_light3 , 0.,
    "Enable light source 3" },
  { F|O, "Light3X" , opt_general_light30 , 0.5 ,
    "X position of light source 3" },
  { F|O, "Light3Y" , opt_general_light31 , 0.3 ,
    "Y position of light source 3" },
  { F|O, "Light3Z" , opt_general_light32 , 1.0 ,
    "Z position of light source 3" },
  { F|O, "Light3W" , opt_general_light33 , 0.0 ,
    "Divisor of the X, Y and Z coordinates of light source 3 (W=0 means infinitely "
    "far source)" },
  { F|O, "Light4" , opt_general_light4 , 0.,
    "Enable light source 4" },
  { F|O, "Light4X" , opt_general_light40 , 0.5 ,
    "X position of light source 4" },
  { F|O, "Light4Y" , opt_general_light41 , 0.3 ,
    "Y position of light source 4" },
  { F|O, "Light4Z" , opt_general_light42 , 1.0 ,
    "Z position of light source 4" },
  { F|O, "Light4W" , opt_general_light43 , 0.0 ,
    "Divisor of the X, Y and Z coordinates of light source 4 (W=0 means infinitely "
    "far source)" },
  { F|O, "Light5" , opt_general_light5 , 0.,
    "Enable light source 5" },
  { F|O, "Light5X" , opt_general_light50 , 0.5 ,
    "X position of light source 5" },
  { F|O, "Light5Y" , opt_general_light51 , 0.3 ,
    "Y position of light source 5" },
  { F|O, "Light5Z" , opt_general_light52 , 1.0 ,
    "Z position of light source 5" },
  { F|O, "Light5W" , opt_general_light53 , 0.0 ,
    "Divisor of the X, Y and Z coordinates of light source 5 (W=0 means infinitely "
    "far source)" },
  { F|O, "LineWidth" , opt_general_line_width , 1.0 ,
    "Display width of lines (in pixels)" },

  { F|S, "ManipulatorPositionX" , opt_general_manip_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the manipulator "
    "window" },
  { F|S, "ManipulatorPositionY" , opt_general_manip_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the manipulator "
    "window" },
  { F,   "MaxX" , opt_general_xmax , 0. ,
    "Maximum model coordinate along the X-axis (read-only)" },
  { F,   "MaxY" , opt_general_ymax , 0. ,
    "Maximum model coordinate along the Y-axis (read-only)" },
  { F,   "MaxZ" , opt_general_zmax , 0. ,
    "Maximum model coordinate along the Z-axis (read-only)" },
  { F|S, "MenuWidth" , opt_general_menu_size0 , 200. ,
    "Width (in pixels) of the menu tree" },
  { F|S, "MenuHeight" , opt_general_menu_size1 , 200. ,
    "Height (in pixels) of the (detached) menu tree" },
  { F|S, "MenuPositionX" , opt_general_menu_position0 , 400. ,
    "Horizontal position (in pixels) of the (detached) menu tree" },
  { F|S, "MenuPositionY" , opt_general_menu_position1 , 400. ,
    "Vertical position (in pixels) of the (detached) menu tree" },
  { F|O, "MeshDiscrete" , opt_general_meshdiscrete , 0. ,
    "Mesh discrete surfaces through automatic parametrization (MUMPS required for efficiency) (0)" },
  { F|O, "MessageFontSize" , opt_general_message_fontsize , -1. ,
    "Size of the font in the message window, in pixels (-1: automatic)" },
  { F|S, "MessageHeight" , opt_general_message_size , 300. ,
    "Height (in pixels) of the message console when it is visible (should be > 0)" },
  { F,   "MinX" , opt_general_xmin , 0. ,
    "Minimum model coordinate along the X-axis (read-only)" },
  { F,   "MinY" , opt_general_ymin , 0. ,
    "Minimum model coordinate along the Y-axis (read-only)" },
  { F,   "MinZ" , opt_general_zmin , 0. ,
    "Minimum model coordinate along the Z-axis (read-only)" },
  { F|O, "MouseHoverMeshes" , opt_general_mouse_hover_meshes , 0. ,
    "Enable mouse hover on meshes" },
  { F|O, "MouseSelection" , opt_general_mouse_selection , 1. ,
    "Enable mouse selection" },

  { F|S, "NonModalWindows" , opt_general_non_modal_windows , 1. ,
    "Force all control windows to be on top of the graphic window "
    "(\"non-modal\")" },
  { F|O, "NoPopup" , opt_general_nopopup , 0. ,
    "Disable interactive dialog windows in scripts (and use default values "
    "instead)" },

  { F|S, "OptionsPositionX" , opt_general_option_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the option "
    "window" },
  { F|S, "OptionsPositionY" , opt_general_option_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the option window" },
  { F|O, "Orthographic" , opt_general_orthographic , 1. ,
    "Orthographic projection mode (0=perspective projection)" },

  { F|S, "PluginPositionX" , opt_general_plugin_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the plugin "
    "window" },
  { F|S, "PluginPositionY" , opt_general_plugin_position1 , 550. ,
    "Vertical position (in pixels) of the upper left corner of the plugin window" },
  { F|S, "PluginHeight" , opt_general_plugin_size1 , 320. ,
    "Height (in pixels) of the plugin window" },
  { F|S, "PluginWidth" , opt_general_plugin_size0 , 420. ,
    "Width (in pixels) of the plugin window" },
  { F|O, "PointSize" , opt_general_point_size , 3. ,
    "Display size of points (in pixels)" },
  { F|O, "PolygonOffsetAlwaysOn" , opt_general_polygon_offset_always , 0. ,
    "Always apply polygon offset, instead of trying to detect when it is required" },
  { F|O, "PolygonOffsetFactor" , opt_general_polygon_offset_factor ,
#if defined(__APPLE__)
    0.5 ,
#else
    1.0 ,
#endif
    "Polygon offset factor (offset = factor * DZ + r * units)" },
  { F|O, "PolygonOffsetUnits" , opt_general_polygon_offset_units , 1. ,
    "Polygon offset units (offset = factor * DZ + r * units)" },
  { F|O, "ProgressMeterStep" , opt_general_progress_meter_step , 20. ,
    "Increment (in percent) of the progress meter bar" },

  { F|O, "QuadricSubdivisions" , opt_general_quadric_subdivisions, 6. ,
    "Number of subdivisions used to draw points or lines as spheres or cylinders" },

  { F,   "RotationX" , opt_general_rotation0 , 0.0 ,
    "First Euler angle (used if Trackball=0)" },
  { F,   "RotationY" , opt_general_rotation1 , 0.0 ,
    "Second Euler angle (used if Trackball=0)" },
  { F,   "RotationZ" , opt_general_rotation2 , 0.0 ,
    "Third Euler angle (used if Trackball=0)" },
  { F|O, "RotationCenterGravity" , opt_general_rotation_center_cg , 1. ,
    "Rotate around the (pseudo) center of mass instead of (RotationCenterX, "
    "RotationCenterY, RotationCenterZ)" },
  { F,   "RotationCenterX" , opt_general_rotation_center0 , 0.0 ,
    "X coordinate of the center of rotation" },
  { F,   "RotationCenterY" , opt_general_rotation_center1 , 0.0 ,
    "Y coordinate of the center of rotation" },
  { F,   "RotationCenterZ" , opt_general_rotation_center2 , 0.0 ,
    "Z coordinate of the center of rotation" },

  { F|S, "SaveOptions" , opt_general_options_save, 0. ,
    "Automatically save current options in General.OptionsFileName (1) or per model (2)"
    "each time you quit Gmsh?" },
  { F|S, "SaveSession" , opt_general_session_save, 1. ,
    "Automatically save session specific information in General.SessionFileName "
    "each time you quit Gmsh?" },
  { F,   "ScaleX" , opt_general_scale0 , 1.0 ,
    "X-axis scale factor" },
  { F,   "ScaleY" , opt_general_scale1 , 1.0 ,
    "Y-axis scale factor" },
  { F,   "ScaleZ" , opt_general_scale2 , 1.0 ,
    "Z-axis scale factor" },
  { F|O, "Shininess" , opt_general_shine , 0.4 ,
    "Material shininess" },
  { F|O, "ShininessExponent" , opt_general_shine_exponent , 40. ,
    "Material shininess exponent (between 0 and 128)" },
  { F|O, "ShowOptionsOnStartup", opt_general_show_options_on_startup, 0. ,
    "Show option window on startup" },
  { F|O, "ShowMessagesOnStartup", opt_general_show_messages_on_startup, 0. ,
    "Show message window on startup" },
  { F|O, "SmallAxes" , opt_general_small_axes , 1. ,
    "Display the small axes" },
  { F|O, "SmallAxesPositionX" , opt_general_small_axes_position0 , -60. ,
    "X position (in pixels) of small axes (< 0: measure from right window edge; >= 1e5:"
    " centered)" },
  { F|O, "SmallAxesPositionY" , opt_general_small_axes_position1 , -40. ,
    "Y position (in pixels) of small axes (< 0: measure from bottom window edge; >= 1e5:"
    " centered)" },
  { F|O, "SmallAxesSize" , opt_general_small_axes_size , 30. ,
    "Size (in pixels) of small axes" },
  { F|S, "StatisticsPositionX" , opt_general_statistics_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the statistic "
    "window" },
  { F|S, "StatisticsPositionY" , opt_general_statistics_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the statistic"
    " window" },
  { F|O, "Stereo" , opt_general_stereo_mode , 0. ,
    "Use stereo rendering" },
  { F|S, "SystemMenuBar" , opt_general_system_menu_bar , 1. ,
    "Use the system menu bar on Mac OS X?" },

  { F|O, "Terminal" , opt_general_terminal , 0. ,
    "Should information be printed on the terminal (if available)?" },
  { F|O, "Tooltips" , opt_general_tooltips , 1. ,
    "Show tooltips in the user interface" },
  { F|O, "Trackball" , opt_general_trackball , 1. ,
    "Use trackball rotation mode" },
  { F|O, "TrackballHyperbolicSheet" , opt_general_trackball_hyperbolic_sheet , 1. ,
    "Use hyperbolic sheet away from trackball center for z-rotations" },
  { F,   "TrackballQuaternion0" , opt_general_quaternion0 , 0.0 ,
    "First trackball quaternion component (used if General.Trackball=1)" },
  { F,   "TrackballQuaternion1" , opt_general_quaternion1 , 0.0 ,
    "Second trackball quaternion component (used if General.Trackball=1)" },
  { F,   "TrackballQuaternion2" , opt_general_quaternion2 , 0.0 ,
    "Third trackball quaternion component (used if General.Trackball=1)" },
  { F,   "TrackballQuaternion3" , opt_general_quaternion3 , 1.0 ,
    "Fourth trackball quaternion component (used if General.Trackball=1)" },
  { F,   "TranslationX" , opt_general_translation0 , 0.0 ,
    "X-axis translation (in model units)" },
  { F,   "TranslationY" , opt_general_translation1 , 0.0 ,
    "Y-axis translation (in model units)" },
  { F,   "TranslationZ" , opt_general_translation2 , 0.0 ,
    "Z-axis translation (in model units)" },

  { F|O, "VectorType" , opt_general_vector_type , 4 ,
    "Default vector display type (for normals, etc.)" },
  { F|O, "Verbosity" , opt_general_verbosity , 5. ,
    "Level of information printed during processing (0=no information)" },
  { F|S, "VisibilityPositionX" , opt_general_visibility_position0 , 650. ,
    "Horizontal position (in pixels) of the upper left corner of the visibility "
    "window" },
  { F|S, "VisibilityPositionY" , opt_general_visibility_position1 , 150. ,
    "Vertical position (in pixels) of the upper left corner of the visibility "
    "window" },

  { F|O, "ZoomFactor" , opt_general_zoom_factor , 4.0 ,
    "Middle mouse button zoom acceleration factor" },

  { 0, 0 , 0 , 0. , 0 }
} ;

StringXNumber GeometryOptions_Number[] = {
  { F|O, "AutoCoherence" , opt_geometry_auto_coherence , 1. ,
    "Should all duplicate entities be automatically removed? (If AutoCoherence == 2, "
    "also remove degenerate entities)" },

  { F,   "Clip" , opt_geometry_clip , 0.,
    "Enable clipping planes? (Plane[i]=2^i, i=0,...,5)" },
  { F|O, "CopyMeshingMethod" , opt_geometry_copy_meshing_method, 0. ,
    "Copy meshing method (unstructured or transfinite) when duplicating geometrical entities?" },
  { F, "DoubleClickedEntityTag" , opt_geometry_double_clicked_entity_tag, 0. ,
    "Tag of last double-clicked geometrical entity" },

  { F|O, "ExactExtrusion" , opt_geometry_exact_extrusion, 1. ,
    "Use exact extrusion formula in interpolations (set to 0 to allow "
    "geometrical transformations of extruded entities)" },
  { F|O, "ExtrudeReturnLateralEntities" , opt_geometry_extrude_return_lateral, 1. ,
    "Add lateral entities in lists returned by extrusion commands?" },
  { F|O, "ExtrudeSplinePoints" , opt_geometry_extrude_spline_points, 5. ,
    "Number of control points for splines created during extrusion" },

  { F|O, "HideCompounds" , opt_geometry_hide_compounds, 1. ,
    "Hide entities that make up compound entities?" },
  { F|O, "HighlightOrphans" , opt_geometry_highlight_orphans, 0. ,
    "Highlight orphan entities (lines connected to a single surface, etc.)?" },

  { F|O, "LabelType" , opt_geometry_label_type , 1. ,
    "Type of entity label (1=elementary number, 2=physical number)" },
  { F|O, "Light" , opt_geometry_light , 1. ,
    "Enable lighting for the geometry" },
  { F|O, "LightTwoSide" , opt_geometry_light_two_side , 0. ,
    "Light both sides of surfaces (leads to slower rendering)" },
  { F|O, "Lines" , opt_geometry_lines , 1. ,
    "Display geometry curves?" },
  { F|O, "LineNumbers" , opt_geometry_lines_num , 0. ,
    "Display curve numbers?" },
  { F|O, "LineSelectWidth" , opt_geometry_line_sel_width , 2. ,
    "Display width of selected lines (in pixels)" },
  { F|O, "LineType" , opt_geometry_line_type , 0. ,
    "Display lines as solid color segments (0), 3D cylinders (1) or tapered "
    "cylinders (2)" },
  { F|O, "LineWidth" , opt_geometry_line_width , 2. ,
    "Display width of lines (in pixels)" },

  { F|O, "MatchGeomAndMesh" , opt_geometry_match_geom_and_mesh, 0 ,
    "Matches geometries and meshes" },

  { F|O, "Normals" , opt_geometry_normals , 0. ,
    "Display size of normal vectors (in pixels)" },
  { F|O, "NumSubEdges" , opt_geometry_num_sub_edges , 20. ,
    "Number of edge subdivisions between control points when displaying curves" },

  { F|O, "OCCFixDegenerated" , opt_geometry_occ_fix_degenerated , 0. ,
    "Fix degenerated edges/faces in STEP, IGES and BRep models" },
  { F|O, "OCCFixSmallEdges" , opt_geometry_occ_fix_small_edges , 0. ,
    "Fix small edges in STEP, IGES and BRep models" },
  { F|O, "OCCFixSmallFaces" , opt_geometry_occ_fix_small_faces , 0. ,
    "Fix small faces in STEP, IGES and BRep models" },
  { F|O, "OCCSewFaces" , opt_geometry_occ_sew_faces , 0. ,
    "Sew faces in STEP, IGES and BRep models" },
  { F|O, "OCCParallel" , opt_geometry_occ_parallel , 0. ,
    "Use multi-threaded OCC boolean operators" },
  { F|O, "OCCScaling" , opt_geometry_occ_scaling , 1. ,
    "Scale STEP, IGES and BRep model by given factor" },
  { F,   "OffsetX" , opt_geometry_offset0 , 0. ,
    "Model display offset along X-axis (in model coordinates)" },
  { F,   "OffsetY" , opt_geometry_offset1 , 0. ,
    "Model display offset along Y-axis (in model coordinates)" },
  { F,   "OffsetZ" , opt_geometry_offset2 , 0. ,
    "Model display offset along Z-axis (in model coordinates)" },
  { F|O, "OldCircle" , opt_geometry_old_circle , 0. ,
    "Use old circle description (compatibility option for old Gmsh geometries)" },
  { F|O, "OldRuledSurface" , opt_geometry_old_ruled_surface , 0. ,
    "Use old 3-sided ruled surface interpolation (compatibility option for old Gmsh geometries)" },
  { F|O, "OldNewReg" , opt_geometry_old_newreg , 1. ,
    "Use old newreg definition for geometrical transformations (compatibility "
    "option for old Gmsh geometries)" },

  { F|O, "Points" , opt_geometry_points , 1. ,
    "Display geometry points?" },
  { F|O, "PointNumbers" , opt_geometry_points_num , 0. ,
    "Display points numbers?" },
  { F|O, "PointSelectSize" , opt_geometry_point_sel_size , 5. ,
    "Display size of selected points (in pixels)" },
  { F|O, "PointSize" , opt_geometry_point_size , 4. ,
    "Display size of points (in pixels)" },
  { F|O, "PointType" , opt_geometry_point_type , 0. ,
    "Display points as solid color dots (0) or 3D spheres (1)" },

  { F|O, "ScalingFactor" , opt_geometry_scaling_factor , 1.0 ,
    "Global geometry scaling factor" },
  { F|O, "OrientedPhysicals" , opt_geometry_oriented_physicals, 1. ,
    "Use sign of elementary entity in physical definition as orientation indicator" },
  { F|O, "SnapX" , opt_geometry_snap0 , 0.1 ,
    "Snapping grid spacing along the X-axis" },
  { F|O, "SnapY" , opt_geometry_snap1 , 0.1 ,
    "Snapping grid spacing along the Y-axis" },
  { F|O, "SnapZ" , opt_geometry_snap2 , 0.1 ,
    "Snapping grid spacing along the Z-axis" },
  { F|O, "Surfaces" , opt_geometry_surfaces , 0. ,
    "Display geometry surfaces?" },
  { F|O, "SurfaceNumbers" , opt_geometry_surfaces_num , 0. ,
    "Display surface numbers?" },
  { F|O, "SurfaceType" , opt_geometry_surface_type , 2. ,
    "Surface display type (0=cross, 1=wireframe, 2=solid)" },

  { F|O, "Tangents" , opt_geometry_tangents , 0. ,
    "Display size of tangent vectors (in pixels)" },
  { F|O, "Tolerance" , opt_geometry_tolerance, 1.e-8 ,
    "Geometrical tolerance" },
  { F|O, "ToleranceBoolean" , opt_geometry_tolerance_boolean, 0. ,
    "Geometrical tolerance for boolean operations" },
  { F,   "Transform" , opt_geometry_transform , 0. ,
    "Transform model display coordinates (0=no, 1=scale)" },
  { F,   "TransformXX" , opt_geometry_transform00 , 1. ,
    "Element (1,1) of the 3x3 model display transformation matrix" },
  { F,   "TransformXY" , opt_geometry_transform01 , 0. ,
    "Element (1,2) of the 3x3 model display transformation matrix" },
  { F,   "TransformXZ" , opt_geometry_transform02 , 0. ,
    "Element (1,3) of the 3x3 model display transformation matrix" },
  { F,   "TransformYX" , opt_geometry_transform10 , 0. ,
    "Element (2,1) of the 3x3 model display transformation matrix" },
  { F,   "TransformYY" , opt_geometry_transform11 , 1. ,
    "Element (2,2) of the 3x3 model display transformation matrix" },
  { F,   "TransformYZ" , opt_geometry_transform12 , 0. ,
    "Element (2,3) of the 3x3 model display transformation matrix" },
  { F,   "TransformZX" , opt_geometry_transform20 , 0. ,
    "Element (3,1) of the 3x3 model display transformation matrix" },
  { F,   "TransformZY" , opt_geometry_transform21 , 0. ,
    "Element (3,2) of the 3x3 model display transformation matrix" },
  { F,   "TransformZZ" , opt_geometry_transform22 , 1. ,
    "Element (3,3) of the 3x3 model display transformation matrix" },

  { F|O, "Volumes" , opt_geometry_volumes , 0. ,
    "Display geometry volumes? (not implemented yet)" },
  { F|O, "VolumeNumbers" , opt_geometry_volumes_num , 0. ,
    "Display volume numbers? (not implemented yet)" },

  { 0, 0 , 0 , 0. , 0 }
} ;

StringXNumber MeshOptions_Number[] = {
  { F|O, "Algorithm" , opt_mesh_algo2d , ALGO_2D_AUTO ,
    "2D mesh algorithm (1=MeshAdapt, 2=Automatic, 5=Delaunay, 6=Frontal, 7=BAMG, 8=DelQuad)" },
  { F|O, "Algorithm3D" , opt_mesh_algo3d ,
#if defined(HAVE_TETGEN)
    ALGO_3D_DELAUNAY ,
#else
    ALGO_3D_DELAUNAY_NEW ,
#endif
    "3D mesh algorithm (1=Delaunay, 2=New Delaunay, 4=Frontal, 5=Frontal Delaunay, "
    "6=Frontal Hex, 7=MMG3D, 9=R-tree)" },
  { F|O, "AngleSmoothNormals" , opt_mesh_angle_smooth_normals , 30.0 ,
    "Threshold angle below which normals are not smoothed" },
  { F|O, "AnisoMax" , opt_mesh_aniso_max, 1.e33,
    "Maximum anisotropy of the mesh" },
  { F|O, "AllowSwapAngle" , opt_mesh_allow_swap_edge_angle , 10.0 ,
    "Threshold angle (in degrees) between faces normals under which we allow "
    "an edge swap" },

  { F|O, "BdfFieldFormat" , opt_mesh_bdf_field_format , 1. ,
    "Field format for Nastran BDF files (0=free, 1=small, 2=large)" },
  { F|O, "Binary" , opt_mesh_binary , 0. ,
    "Write mesh files in binary format (if possible)" },
  { F|O, "Lloyd" , opt_mesh_lloyd , 0. ,
    "Apply lloyd optimization on surface meshes" },
  { F|O, "SmoothCrossField" , opt_mesh_smooth_cross_field , 0. ,
    "Apply n barycentric smoothing passes to the cross field" },

  { F|O, "CgnsImportOrder" , opt_mesh_cgns_import_order , 1. ,
   "Enable the creation of high-order mesh from CGNS structured meshes"
   "(1, 2, 4, 8, ...)" },
  { F|O, "ChacoArchitecture" , opt_mesh_partition_chaco_architecture, 1. ,
    "(Adv. Chaco): Parallel architecture topology (0=hypercube, 1-3=mesh "
    "dimensions)" },
  { F|O, "ChacoEigensolver" , opt_mesh_partition_chaco_eigensolver, 1. ,
    "(Adv. Chaco): Type of eigensolver for a spectral algorithm (0=Lanczos, "
    "1=Multilevel RQI/Symmlq)" },
  { F|O, "ChacoEigTol" , opt_mesh_partition_chaco_eigtol, 1.E-3 ,
    "(Adv. Chaco): Tolerance of the eigensolver for spectral or multilevel-KL "
    "algorithms" },
  { F|O, "ChacoGlobalMethod" , opt_mesh_partition_chaco_global_method, 1. ,
    "Chaco partitioning algorithm (1=Multilevel-KL, 2=Spectral, 4=Linear, "
    "5=Random, 6=Scattered)" },
  { F|O, "ChacoHypercubeDim" , opt_mesh_partition_chaco_ndims_tot, 2. ,
    "(Adv. Chaco): Dimensional partitioning for a hypercube topology" },
  { F|O, "ChacoLocalMethod" , opt_mesh_partition_chaco_local_method, 1. ,
    "(Adv. Chaco): Local partitioning algorithm" },
  { F|O, "ChacoMeshDim1" , opt_mesh_partition_chaco_mesh_dims1, 4. ,
    "(Adv. Chaco): Number of partitions in the first dimension of a mesh topology" },
  { F|O, "ChacoMeshDim2" , opt_mesh_partition_chaco_mesh_dims2, 1. ,
    "(Adv. Chaco): Number of partitions in the second dimension of a mesh topology" },
  { F|O, "ChacoMeshDim3" , opt_mesh_partition_chaco_mesh_dims3, 1. ,
    "(Adv. Chaco): Number of partitions in the third dimension of a mesh topology" },
  { F|O, "ChacoPartitionSection" , opt_mesh_partition_chaco_nsection, 1. ,
    "(Adv. Chaco): Partition by (1=bisection, 2=quadrisection, 3=octasection" },
  { F|O, "ChacoSeed" , opt_mesh_partition_chaco_seed, 7654321. ,
    "(Adv. Chaco): Seed for random number generator" },
  { F|O, "ChacoVMax" , opt_mesh_partition_chaco_vmax, 250. ,
    "(Adv. Chaco): Maximum vertices in a coarse graph (for multilevel-KL "
    "algorithm and Multilevel RQI/Symmlq eigensolver)" },
  { F|O, "ChacoParamINTERNAL_VERTICES" ,
    opt_mesh_partition_chaco_internal_vertices, 0. ,
    "(Adv. Chaco): Parameter INTERNAL_VERTICES" },
  { F|O, "ChacoParamREFINE_MAP" , opt_mesh_partition_chaco_refine_map, 1. ,
    "(Adv. Chaco): Parameter REFINE_MAP" },
  { F|O, "ChacoParamREFINE_PARTITION" ,
    opt_mesh_partition_chaco_refine_partition, 0. ,
    "(Adv. Chaco): Parameter REFINE_PARTITION" },
  { F|O, "ChacoParamTERMINAL_PROPOGATION" ,
    opt_mesh_partition_chaco_terminal_propogation, 0. ,
    "(Adv. Chaco): Parameter TERMINAL_PROPOGATION" },
  { F|O, "CharacteristicLengthExtendFromBoundary" ,
    opt_mesh_lc_extend_from_boundary, 1. ,
    "Extend computation of mesh element sizes from the boundaries into the surfaces/volumes" },
  { F|O, "CharacteristicLengthFactor" , opt_mesh_lc_factor , 1.0 ,
    "Factor applied to all mesh element sizes" },
  { F|O, "CharacteristicLengthMin" , opt_mesh_lc_min, 0.0 ,
    "Minimum mesh element size" },
  { F|O, "CharacteristicLengthMax" , opt_mesh_lc_max, 1.e22,
    "Maximum mesh element size" },
  { F|O, "CharacteristicLengthFromCurvature" , opt_mesh_lc_from_curvature , 0. ,
    "Automatically compute mesh element sizes from curvature (experimental)" },
  { F|O, "CharacteristicLengthFromPoints" , opt_mesh_lc_from_points , 1. ,
    "Compute mesh element sizes from values given at geometry points" },
  { F,   "Clip" , opt_mesh_clip , 0.,
    "Enable clipping planes? (Plane[i]=2^i, i=0,...,5)" },
  { F|O, "ColorCarousel" , opt_mesh_color_carousel , 1. ,
    "Mesh coloring (0=by element type, 1=by elementary entity, 2=by physical "
    "entity, 3=by partition)" },
  { F,   "CpuTime" , opt_mesh_cpu_time , 0. ,
    "CPU time (in seconds) for the generation of the current mesh (read-only)" },

  { F|O, "DrawSkinOnly" , opt_mesh_draw_skin_only , 0. ,
    "Draw only the skin of 3D meshes?" },
  { F|O, "Dual" , opt_mesh_dual , 0. ,
    "Display the dual mesh obtained by barycentric subdivision" },

  { F|O, "ElementOrder" , opt_mesh_order , 1. ,
    // "Order" is a reserved token in the parser
    "Element order (1=linear elements, N (<6) = elements of higher order)" },
  { F|O, "Explode" , opt_mesh_explode , 1.0 ,
    "Element shrinking factor (between 0 and 1)" },

  { F|O, "FlexibleTransfinite" , opt_mesh_flexible_transfinite , 0 ,
    "Allow transfinite contraints to be modified for Blossom or by global mesh size factor" },
  { F|O, "NewtonConvergenceTestXYZ" , opt_mesh_newton_convergence_test_xyz , 0. ,
    "Force inverse surface mapping algorithm (Newton-Raphson) to converge in real "
    "coordinates (experimental)" },
  { F|O, "Format" , opt_mesh_file_format , FORMAT_AUTO ,
    "Mesh output format (1=msh, 2=unv, 10=automatic, 19=vrml, 26=pos statistics, 27=stl, "
    "30=mesh, 31=bdf, 32=cgns, 33=med, 39=inp, 40=ply2)" },

  { F|O, "Hexahedra" , opt_mesh_hexahedra , 1. ,
    "Display mesh hexahedra?" },
  { F|0, "HighOrderNumLayers", opt_mesh_ho_nlayers, 6.,
    "Number of high order mesh elements to consider for optimization"},
  { F|O, "HighOrderOptimize" , opt_mesh_ho_optimize , 0.,
    "Optimize high order meshes?" },
  { F|0, "HighOrderPoissonRatio", opt_mesh_ho_poisson, 0.33,
    "Poisson ratio of the material used in the elastic smoother for high order meshes"
    "Must be between -1.0 and 0.5, excluded"},
  { F|O, "HighOrderThresholdMin", opt_mesh_ho_threshold_min, 0.1,
    "Minimum threshold for high order element optimization"},
  { F|O, "HighOrderThresholdMax", opt_mesh_ho_threshold_max, 2.0,
    "Maximum threshold for high order element optimization"},
  { F|O, "HighOrderOptPrimSurfMesh", opt_mesh_ho_opt_prim_surf_mesh, 0,
    "Try to fix flipped surface mesh elements in high-order optimizer"},

  { F|O, "LabelSampling" , opt_mesh_label_sampling , 1. ,
    "Label sampling rate (display one label every `LabelSampling' elements)" },
  { F|O, "LabelType" , opt_mesh_label_type , 0. ,
    "Type of element label (0=element number, 1=elementary entity number, "
    "2=physical entity number, 3=partition number, 4=coordinates)" },
  { F|O, "LcIntegrationPrecision" , opt_mesh_lc_integration_precision, 1.e-9 ,
    "Accuracy of evaluation of the LC field for 1D mesh generation" },
  { F|O, "Light" , opt_mesh_light , 1. ,
    "Enable lighting for the mesh" },
  { F|O, "LightLines" , opt_mesh_light_lines , 2. ,
    "Enable lighting for mesh edges (0=no, 1=surfaces, 2=surfaces+volumes" },
  { F|O, "LightTwoSide" , opt_mesh_light_two_side , 0. ,
    "Light both sides of surfaces (leads to slower rendering)" },
  { F|O, "Lines" , opt_mesh_lines , 0. ,
    "Display mesh lines (1D elements)?" },
  { F|O, "LineNumbers" , opt_mesh_lines_num , 0. ,
    "Display mesh line numbers?" },
  { F|O, "LineWidth" , opt_mesh_line_width , 1.0 ,
    "Display width of mesh lines (in pixels)" },

  { F|O, "MeshOnlyVisible" , opt_mesh_mesh_only_visible, 0. ,
    "Mesh only visible entities (experimental: use with caution!)" },
  { F|O, "MetisAlgorithm" , opt_mesh_partition_metis_algorithm, 1. ,
    "METIS partitioning algorithm (1=Recursive, 2=K-way, 3=Nodal weight)" },
  { F|O, "MetisEdgeMatching" , opt_mesh_partition_metis_edge_matching, 3. ,
    "(Adv. METIS): Determines the matching type (1=Random, 2=Heavy-Edge, "
    "3=Sorted Heavy-Edge)" },
  { F|O, "MetisRefinementAlgorithm" , opt_mesh_partition_metis_refine_algorithm, 3. ,
    "(Adv. METIS): Algorithm for k-way refinement (1=Random, 2=Greedy, "
    "3=Random with minimized connectivity)" },
  { F|O, "MinimumCirclePoints" , opt_mesh_min_circ_points, 7. ,
    "Minimum number of points used to mesh a circle" },
  { F|O, "MinimumCurvePoints" , opt_mesh_min_curv_points, 3. ,
    "Minimum number of points used to mesh a (non-straight) curve" },
  { F|O, "MshFileVersion" , opt_mesh_msh_file_version , 2.2 ,
    "Version of the MSH file format to use" },
  { F|O, "MshFilePartitioned" , opt_mesh_msh_file_partitioned , 0. ,
    "Split MSH file by mesh partition (0: no, 1: yes, 2: create physicals by partition)" },
  { F|O, "PartitionHexWeight"     , opt_mesh_partition_hex_weight , 1 ,
    "Weight of hexahedral element for METIS load balancing" },
  { F|O, "PartitionPrismWeight"   , opt_mesh_partition_pri_weight , 1 ,
    "Weight of prismatic element (wedge) for METIS load balancing" },
  { F|O, "PartitionPyramidWeight" , opt_mesh_partition_pyr_weight , 1 ,
    "Weight of pyramidal element for METIS load balancing" },
  { F|O, "PartitionTrihedronWeight" , opt_mesh_partition_trih_weight , 0 ,
    "Weight of trihedron element for METIS load balancing" },
  { F|O, "PartitionQuadWeight"    , opt_mesh_partition_qua_weight , 1 ,
    "Weight of quadrangle for METIS load balancing" },
  { F|O, "PartitionTetWeight"     , opt_mesh_partition_tet_weight , 1 ,
    "Weight of tetrahedral element for METIS load balancing" },
  { F|O, "PartitionTriWeight"     , opt_mesh_partition_tri_weight , 1 ,
    "Weight of triangle for METIS load balancing" ,},

  { F, "NbHexahedra" , opt_mesh_nb_hexahedra , 0. ,
    "Number of hexahedra in the current mesh (read-only)" },
  { F, "NbNodes" , opt_mesh_nb_nodes , 0. ,
    "Number of nodes in the current mesh (read-only)" },
  { F|O, "NbPartitions" , opt_mesh_partition_num, 1. ,
    "Number of partitions" },
  { F, "NbPrisms" , opt_mesh_nb_prisms , 0. ,
    "Number of prisms in the current mesh (read-only)" },
  { F, "NbPyramids" , opt_mesh_nb_pyramids , 0. ,
    "Number of pyramids in the current mesh (read-only)" },
  { F, "NbTrihedra" , opt_mesh_nb_trihedra , 0. ,
    "Number of trihedra in the current mesh (read-only)" },
  { F, "NbQuadrangles" , opt_mesh_nb_quadrangles , 0. ,
    "Number of quadrangles in the current mesh (read-only)" },
  { F, "NbTetrahedra" , opt_mesh_nb_tetrahedra , 0. ,
    "Number of tetrahedra in the current mesh (read-only)" },
  { F, "NbTriangles" , opt_mesh_nb_triangles , 0. ,
    "Number of triangles in the current mesh (read-only)" },
  { F|O, "Normals" , opt_mesh_normals , 0.0 ,
    "Display size of normal vectors (in pixels)" },
  { F|O, "NumSubEdges" , opt_mesh_num_sub_edges , 2. ,
    "Number of edge subdivisions when displaying high order elements" },

  { F|O, "OldRefinement" , opt_mesh_old_refinement , 1 ,
    "Use old 3D point insertion algorithm" },
  { F|O, "Optimize" , opt_mesh_optimize , 1. ,
    "Optimize the mesh to improve the quality of tetrahedral elements" },
  { F|O, "OptimizeThreshold" , opt_mesh_optimize_threshold , 0.3 ,
    "Optimize tetrahedra that have a quality below ... " },
  { F|O, "OptimizeNetgen" , opt_mesh_optimize_netgen , 0 ,
    "Optimize the mesh using Netgen to improve the quality of tetrahedral "
    "elements" },

  { F|O, "Partitioner" , opt_mesh_partition_partitioner, 2. ,
    "Partitioner software (1=Chacho, 2=METIS)" },
  { F|O, "Points" , opt_mesh_points , 0. ,
    "Display mesh vertices (nodes)?" },
  { F|O, "PointNumbers" , opt_mesh_points_num , 0. ,
    "Display mesh node numbers?" },
  { F|O, "PointSize" , opt_mesh_point_size , 4. ,
    "Display size of mesh vertices (in pixels)" },
  { F|O, "PointType" , opt_mesh_point_type , 0. ,
    "Display mesh vertices as solid color dots (0) or 3D spheres (1)" },
  { F|O, "Prisms" , opt_mesh_prisms , 1. ,
    "Display mesh prisms?" },
  { F|O, "Pyramids" , opt_mesh_pyramids , 1. ,
    "Display mesh pyramids?" },
  { F|O, "Trihedra" , opt_mesh_trihedra , 1. ,
    "Display mesh trihedra?" },

  { F|O, "Quadrangles" , opt_mesh_quadrangles , 1. ,
    "Display mesh quadrangles?" },
  { F|O, "QualityInf" , opt_mesh_quality_inf , 0.0 ,
    "Only display elements whose quality measure is greater than QualityInf" },
  { F|O, "QualitySup" , opt_mesh_quality_sup , 0.0 ,
    "Only display elements whose quality measure is smaller than QualitySup" },
  { F|O, "QualityType" , opt_mesh_quality_type , 2. ,
    "Type of quality measure (0=gamma~vol/sum_face/max_edge, "
    "1=eta~vol^(2/3)/sum_edge^2, 2=rho~min_edge/max_edge)" },

  { F|O, "RadiusInf" , opt_mesh_radius_inf , 0.0 ,
    "Only display elements whose longest edge is greater than RadiusInf" },
  { F|O, "RadiusSup" , opt_mesh_radius_sup , 0.0 ,
    "Only display elements whose longest edge is smaller than RadiusSup" },
  { F|O, "RandomFactor" , opt_mesh_rand_factor , 1.e-9 ,
    "Random factor used in the 2D meshing algorithm (should be increased if "
    "RandomFactor * size(triangle)/size(model) approaches machine accuracy)" },
  { F|O, "IgnorePartitionBoundary" , opt_mesh_ignore_part_bound , 0. ,
    "Ignore partitions boundaries (0=no, 1=yes)"},
  { F|O, "PreserveNumberingMsh2" , opt_mesh_preserve_numbering_msh2 , 0. ,
    "Preserve element numbering in MSH2 format (will break meshes with multiple "
    "physical groups for a single elementary entity)"},
  { F|O, "IgnorePeriodicity" , opt_mesh_ignore_periodicity , 0. ,
    "Ignore alignement of periodic boundaries when reading the mesh "
    "(used by ParaView plugin)"},
#if defined(HAVE_BLOSSOM)
  { F|O, "RecombinationAlgorithm" , opt_mesh_algo_recombine , 1 ,
#else
  { F|O, "RecombinationAlgorithm" , opt_mesh_algo_recombine , 0 ,
#endif
    "Mesh recombination algorithm (0=standard, 1=blossom)" },
  { F|O, "RecombineAll" , opt_mesh_recombine_all , 0 ,
    "Apply recombination algorithm to all surfaces, ignoring per-surface spec" },
  { F|O, "Recombine3DAll" , opt_mesh_recombine3d_all , 0 ,
    "Apply recombination3D algorithm to all volumes, ignoring per-volume spec" },
  { F|O, "Recombine3DLevel" , opt_mesh_recombine3d_level , 0 ,
    "3d recombination level (0: hex, 1: hex+prisms, 2: hex+prism+pyramids)" },
  { F|O, "Recombine3DConformity" , opt_mesh_recombine3d_conformity , 0 ,
    "3d recombination conformity type (0: nonconforming, 1: trihedra, "
    "2: pyramids+trihedra, 3:pyramids+hexSplit+trihedra, 4:hexSplit+trihedra)" },
  { F|O, "DoRecombinationTest" , opt_mesh_do_recombination_test , 0 ,
    "Apply recombination algorithm for test" },
  { F|O, "RecombinationTestHorizStart" , opt_mesh_recombination_test_start , 1 ,
    "Depth start" },
  { F|O, "RecombinationTestNoGreedyStrat" , opt_mesh_recombination_no_greedy_strat , 0 ,
    "No greedy (global) strategies" },
  { F|O, "RemeshAlgorithm" , opt_mesh_remesh_algo , 0 ,
    "Remeshing algorithm (0=no split, 1=automatic, 2=automatic only with metis)" },
  { F|O, "RemeshParametrization" , opt_mesh_remesh_param , 4 ,
    "Remeshing using discrete parametrization (0=harmonic_circle, 1=conformal_spectral, "
    "2=rbf, 3=harmonic_plane, 4=convex_circle, 5=convex_plane, 6=harmonic square, "
    "7=conformal_fe" },
  { F|O, "RefineSteps" , opt_mesh_refine_steps , 10 ,
    "Number of refinement steps in the MeshAdapt-based 2D algorithms" },

  { F,   "SaveAll" , opt_mesh_save_all , 0. ,
    "Ignore Physical definitions and save all elements" },
  { F|O, "SaveElementTagType" , opt_mesh_save_element_tag_type , 1. ,
    "Type of the element tag saved in mesh formats that don't support saving "
    "physical or partition ids (1=elementary, 2=physical, 3=partition)" },
  { F|O, "SaveTopology" , opt_mesh_save_topology, 0. ,
    "Save model topology in MSH2 output files (this is always saved in MSH3)" },
  { F|O, "SaveParametric" , opt_mesh_save_parametric , 0. ,
    "Save parametric coordinates of nodes" },
  { F|O, "SaveGroupsOfNodes" , opt_mesh_save_groups_of_nodes , 0. ,
    "Save groups of nodes for each physical line and surface (UNV mesh "
    "format only)" },
  { F|O, "ScalingFactor" , opt_mesh_scaling_factor , 1.0 ,
    "Global scaling factor applied to the saved mesh" },
  { F|O, "SecondOrderExperimental" , opt_mesh_second_order_experimental , 0. ,
    "Use experimental code to generate second order mesh" },
  { F|O, "SecondOrderIncomplete" , opt_mesh_second_order_incomplete , 0. ,
    "Create incomplete second order elements? (8-node quads, 20-node hexas, etc.)" },
  { F|O, "SecondOrderLinear" , opt_mesh_second_order_linear , 0. ,
    "Should second order vertices simply be created by linear interpolation?" },
  { F|O, "Smoothing" , opt_mesh_nb_smoothing , 1. ,
    "Number of smoothing steps applied to the final mesh" },
  { F|O, "SmoothNormals" , opt_mesh_smooth_normals , 0. ,
    "Smooth the mesh normals?" },
  { F|O, "SmoothRatio" , opt_mesh_smooth_ratio , 1.8 ,
    "Ratio between mesh sizes at vertices of a same edeg (used in BAMG)" },
  { F|O, "SubdivisionAlgorithm" , opt_mesh_algo_subdivide , 0 ,
    "Mesh subdivision algorithm (0=none, 1=all quadrangles, 2=all hexahedra)" },
  { F|O, "SurfaceEdges" , opt_mesh_surfaces_edges , 1. ,
    "Display edges of surface mesh?" },
  { F|O, "SurfaceFaces" , opt_mesh_surfaces_faces , 0. ,
    "Display faces of surface mesh?" },
  { F|O, "SurfaceNumbers" , opt_mesh_surfaces_num , 0. ,
    "Display surface mesh element numbers?" },
  { F|O, "SwitchElementTags", opt_mesh_switch_elem_tags, 0. ,
    "Invert elementary and physical tags when reading the mesh"},

  { F|O, "Tangents" , opt_mesh_tangents , 0.0 ,
    "Display size of tangent vectors (in pixels)" },
  { F|O, "Tetrahedra" , opt_mesh_tetrahedra , 1. ,
    "Display mesh tetrahedra?" },
  { F|O, "ToleranceEdgeLength" , opt_mesh_tolerance_edge_length, 0.0,
    "Skip a model edge in mesh generation if its length is less than user's "
    "defined tolerance" },
  { F|O, "ToleranceInitialDelaunay" , opt_mesh_tolerance_initial_delaunay, 1.e-8,
    "Tolerance for initial 3D Delaunay mesher" },
  { F|O, "Triangles" , opt_mesh_triangles , 1. ,
    "Display mesh triangles?" },

  { F|O, "VolumeEdges" , opt_mesh_volumes_edges , 1. ,
    "Display edges of volume mesh?" },
  { F|O, "VolumeFaces" , opt_mesh_volumes_faces , 0. ,
    "Display faces of volume mesh?" },
  { F|O, "VolumeNumbers" , opt_mesh_volumes_num , 0. ,
    "Display volume mesh element numbers?" },
  { F|O, "Voronoi" , opt_mesh_voronoi , 0. ,
    "Display the voronoi diagram" },

  { F|O, "ZoneDefinition" , opt_mesh_zone_definition , 0. ,
    "Method for defining a zone (0=single zone, 1=by partition, 2=by physical)" },

  { 0, 0 , 0 , 0. , 0 }
} ;

StringXNumber SolverOptions_Number[] = {
  { F|O, "AlwaysListen" , opt_solver_listen , 0. ,
    "Always listen to incoming connection requests?" },
  { F|O, "AutoArchiveOutputFiles" , opt_solver_auto_archive_output_files , 0. ,
    "Automatically archive output files after each computation" },
  { F|O, "AutoCheck" , opt_solver_auto_check , 1. ,
    "Automatically check model every time a parameter is changed" },
  { F|O, "AutoLoadDatabase" , opt_solver_auto_load_database , 0. ,
    "Automatically load the ONELAB database when launching a solver" },
  { F|O, "AutoSaveDatabase" , opt_solver_auto_save_database , 1. ,
    "Automatically save the ONELAB database after each computation" },
  { F|O, "AutoMesh" , opt_solver_auto_mesh , 1. ,
    "Automatically mesh if necesssary (0: never remesh; 1: on startup, use existing "
    "mesh on disk if available; 2: always remesh; -1: the geometry script creates "
    "the mesh)" },
  { F|O, "AutoMergeFile" , opt_solver_auto_merge_file , 1. ,
    "Automatically merge result files" },
  { F|O, "AutoShowViews" , opt_solver_auto_show_views , 2. ,
    "Automcatically show newly merged results (0: none; 1: all; 2: last one)" },
  { F|O, "AutoShowLastStep" , opt_solver_auto_show_last_step , 1. ,
    "Automatically show the last step in newly merged results, if there are "
    "more than 2 steps" },

  { F|O, "Plugins" , opt_solver_plugins , 0. ,
    "Enable default solver plugins?" },

  { F|O, "ShowInvisibleParameters" , opt_solver_show_invisible_parameters , 0. ,
    "Show all parameters, even those marked invisible" },

  { F|O, "Timeout" , opt_solver_timeout , 5. ,
    "Time (in seconds) before closing the socket if no connection is happening" },

  { 0, 0 , 0 , 0. , 0 }
} ;

StringXNumber PostProcessingOptions_Number[] = {
  { F|O, "AnimationDelay" , opt_post_anim_delay , 0.1 ,
    "Delay (in seconds) between frames in automatic animation mode" },
  { F|O, "AnimationCycle" , opt_post_anim_cycle , 0. ,
    "Cycle through time steps (0) or views (1) for animations" },
  { F|O, "AnimationStep" , opt_post_anim_step , 1. ,
    "Step increment for animations" },

  { F|O, "CombineRemoveOriginal" , opt_post_combine_remove_orig , 1. ,
    "Remove original views after a Combine operation" },

  { F, "DoubleClickedGraphPointX" , opt_post_double_clicked_graph_point_x , 0. ,
    "Abscissa of last double-clicked graph point" },
  { F, "DoubleClickedGraphPointY" , opt_post_double_clicked_graph_point_y , 0. ,
    "Ordinate of last double-clicked graph point" },
  { F, "DoubleClickedView" , opt_post_double_clicked_view, 0. ,
    "Index of last double-clicked view" },

  { F|O, "ForceElementData" , opt_post_force_element_data , 0. ,
    "Try to force saving datasets as ElementData" },
  { F|O, "ForceNodeData" , opt_post_force_node_data , 0. ,
    "Try to force saving datasets as NodeData" },
  { F|O, "Format" , opt_post_file_format , 10. ,
    "Default file format for post-processing views (0=ASCII view, 1=binary "
    "view, 2=parsed view, 3=STL triangulation, 4=raw text, 5=Gmsh mesh, 6=MED file, "
    "10=automatic)" },

  { F, "GraphPointX" , opt_post_double_clicked_graph_point_x , 0. ,
    "Synonym for `DoubleClickedGraphPointX'" },
  { F, "GraphPointY" , opt_post_double_clicked_graph_point_y , 0. ,
    "Synonym for `DoubleClickedGraphPointY'" },

  { F|O, "HorizontalScales" , opt_post_horizontal_scales , 1. ,
    "Display value scales horizontally" },

  { F|O, "Link" , opt_post_link , 0. ,
    "Post-processing view links (0=apply next option changes to selected views, "
    "1=force same options for all selected views)" },

  { F,   "NbViews" , opt_post_nb_views , 0. ,
    "Current number of views merged (read-only)" },

  { F|O, "Plugins" , opt_post_plugins , 1. ,
    "Enable default post-processing plugins?" },

  { F|O, "Smoothing" , opt_post_smooth , 0. ,
    "Apply (non-reversible) smoothing to post-processing view when merged" },

  { 0, 0 , 0 , 0. }
} ;

StringXNumber ViewOptions_Number[] = {
  { F|O, "AbscissaRangeType" , opt_view_abscissa_range_type , 1 ,
    "Ascissa scale range type (1=default, 2=custom)" },
  { F|O, "AdaptVisualizationGrid" , opt_view_adapt_visualization_grid , 0. ,
    "Use adaptive visualization grid (for high-order elements)?" },
  { F|O, "AngleSmoothNormals" , opt_view_angle_smooth_normals , 30.0 ,
    "Threshold angle below which normals are not smoothed" },
  { F|O, "ArrowSizeMax" , opt_view_arrow_size_max , 60. ,
    "Maximum display size of arrows (in pixels)" },
  { F|O, "ArrowSizeMin" , opt_view_arrow_size_min , 0. ,
    "Minimum display size of arrows (in pixels)" },
  { F|O, "AutoPosition" , opt_view_auto_position , 1. ,
    "Position the scale or 2D plot automatically (0: manual, 1: automatic, 2: top left, "
    "3: top right, 4: bottom left, 5: bottom right, 6: top, 7: bottom, 8: left, 9: right, "
    "10: full, 11: top third, 12: in model coordinates)" },
  { F|O, "Axes" , opt_view_axes , 0 ,
    "Axes (0=none, 1=simple axes, 2=box, 3=full grid, 4=open grid, 5=ruler)" },
  { F|O, "AxesMikado" , opt_view_axes_mikado , 0. ,
    "Mikado axes style" },
  { F|O, "AxesAutoPosition" , opt_view_axes_auto_position , 1. ,
    "Position the axes automatically" },
  { F|O, "AxesMaxX" , opt_view_axes_xmax , 1. ,
    "Maximum X-axis coordinate" },
  { F|O, "AxesMaxY" , opt_view_axes_ymax , 1. ,
    "Maximum Y-axis coordinate" },
  { F|O, "AxesMaxZ" , opt_view_axes_zmax , 1. ,
    "Maximum Z-axis coordinate" },
  { F|O, "AxesMinX" , opt_view_axes_xmin , 0. ,
    "Minimum X-axis coordinate" },
  { F|O, "AxesMinY" , opt_view_axes_ymin , 0. ,
    "Minimum Y-axis coordinate" },
  { F|O, "AxesMinZ" , opt_view_axes_zmin , 0. ,
    "Minimum Z-axis coordinate" },
  { F|O, "AxesTicsX" , opt_view_axes_tics0 , 5. ,
    "Number of tics on the X-axis" },
  { F|O, "AxesTicsY" , opt_view_axes_tics1 , 5. ,
    "Number of tics on the Y-axis" },
  { F|O, "AxesTicsZ" , opt_view_axes_tics2 , 5. ,
    "Number of tics on the Z-axis" },

  { F|O, "Boundary" , opt_view_boundary , 0. ,
    "Draw the `N minus b'-dimensional boundary of the element (N=element "
    "dimension, b=option value)" },

  { F|O, "CenterGlyphs" , opt_view_center_glyphs , 0,
    "Center glyphs (arrows, numbers, etc.)? (0=left, 1=centered, 2=right)" },
  { F,   "Clip" , opt_view_clip , 0.,
    "Enable clipping planes? (Plane[i]=2^i, i=0,...,5)" },
  { F|O, "Closed" , opt_view_closed , 0,
    "Close the subtree containing this view" },
  { F|O, "ColormapAlpha" , opt_view_colormap_alpha , 1.0 ,
    "Colormap alpha channel value (used only if != 1)" },
  { F|O, "ColormapAlphaPower" , opt_view_colormap_alpha_power , 0.0 ,
    "Colormap alpha channel power" },
  { F|O, "ColormapBeta" , opt_view_colormap_beta , 0.0 ,
    "Colormap beta parameter (gamma = 1-beta)" },
  { F|O, "ColormapBias" , opt_view_colormap_bias , 0.0 ,
    "Colormap bias" },
  { F|O, "ColormapCurvature" , opt_view_colormap_curvature , 0.0 ,
    "Colormap curvature or slope coefficient" },
  { F|O, "ColormapInvert" , opt_view_colormap_invert , 0. ,
    "Invert the color values, i.e., replace x with (255-x) in the colormap?" },
  { F|O, "ColormapNumber" , opt_view_colormap_number , 2. ,
    "Default colormap number (0: black, 1: vis5d, 2: jet, 3: lucie, 4: rainbow, "
    "5: emc2000, 6: incadescent, 7: hot, 8: pink, 9: grayscale, 10: french, "
    "11: hsv, 12: spectrum, 13: bone, 14: spring, 15: summer, 16: autumm, "
    "17: winter, 18: cool, 19: copper, 20: magma, 21: inferno, 22: plasma, "
    "23: viridis)"},
  { F|O, "ColormapRotation" , opt_view_colormap_rotation , 0. ,
    "Incremental colormap rotation" },
  { F|O, "ColormapSwap" , opt_view_colormap_swap , 0. ,
    "Swap the min/max values in the colormap?" },
  { F|O, "ComponentMap0" , opt_view_component_map0 , 0,
    "Forced component 0 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap1" , opt_view_component_map1 , 1,
    "Forced component 1 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap2" , opt_view_component_map2 , 2,
    "Forced component 2 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap3" , opt_view_component_map3 , 3,
    "Forced component 3 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap4" , opt_view_component_map4 , 4,
    "Forced component 4 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap5" , opt_view_component_map5 , 5,
    "Forced component 5 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap6" , opt_view_component_map6 , 6,
    "Forced component 6 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap7" , opt_view_component_map7 , 7,
    "Forced component 7 (if View.ForceComponents > 0)" },
  { F|O, "ComponentMap8" , opt_view_component_map8 , 8,
    "Forced component 8 (if View.ForceComponents > 0)" },
  { F,   "CustomAbscissaMax" , opt_view_custom_abscissa_max , 0. ,
    "User-defined maximum abscissa value" },
  { F,   "CustomAbscissaMin" , opt_view_custom_abscissa_min , 0. ,
    "User-defined minimum abscissa value" },
  { F,   "CustomMax" , opt_view_custom_max , 0. ,
    "User-defined maximum value to be displayed" },
  { F,   "CustomMin" , opt_view_custom_min , 0. ,
    "User-defined minimum value to be displayed" },

  { F|O, "DisplacementFactor" , opt_view_displacement_factor , 1. ,
    "Displacement amplification" },
  { F|O, "DrawHexahedra" , opt_view_draw_hexahedra , 1. ,
    "Display post-processing hexahedra?" },
  { F|O, "DrawLines" , opt_view_draw_lines , 1. ,
    "Display post-processing lines?" },
  { F|O, "DrawPoints" , opt_view_draw_points , 1. ,
    "Display post-processing points?" },
  { F|O, "DrawPrisms" , opt_view_draw_prisms , 1. ,
    "Display post-processing prisms?" },
  { F|O, "DrawPyramids" , opt_view_draw_pyramids , 1. ,
    "Display post-processing pyramids?" },
  { F|O, "DrawTrihedra" , opt_view_draw_trihedra , 1. ,
    "Display post-processing trihedra?" },
  { F|O, "DrawQuadrangles" , opt_view_draw_quadrangles , 1. ,
    "Display post-processing quadrangles?" },
  { F|O, "DrawScalars" , opt_view_draw_scalars , 1. ,
    "Display scalar values?" },
  { F|O, "DrawSkinOnly" , opt_view_draw_skin_only , 0. ,
    "Draw only the skin of 3D scalar views?" },
  { F|O, "DrawStrings" , opt_view_draw_strings , 1. ,
    "Display post-processing annotation strings?" },
  { F|O, "DrawTensors" , opt_view_draw_tensors , 1. ,
    "Display tensor values?" },
  { F|O, "DrawTetrahedra" , opt_view_draw_tetrahedra , 1. ,
    "Display post-processing tetrahedra?" },
  { F|O, "DrawTriangles" , opt_view_draw_triangles , 1. ,
    "Display post-processing triangles?" },
  { F|O, "DrawVectors" , opt_view_draw_vectors , 1. ,
    "Display vector values?" },

  { F|O, "Explode" , opt_view_explode , 1. ,
    "Element shrinking factor (between 0 and 1)" },
  { F|O, "ExternalView" , opt_view_external_view , -1. ,
    "Index of the view used to color vector fields (-1=self)" },

  { F|O, "FakeTransparency" , opt_view_fake_transparency , 0. ,
    "Use fake transparency (cheaper than the real thing, but incorrect)" },
  { F|O, "ForceNumComponents" , opt_view_force_num_components , 0. ,
    "Force number of components to display (see View.ComponentMapN for mapping)" },

  { F|O, "GeneralizedRaiseFactor" , opt_view_gen_raise_factor , 1. ,
    "Generalized raise amplification factor" },
  { F|O, "GeneralizedRaiseView" , opt_view_gen_raise_view , -1. ,
    "Index of the view used for generalized raise (-1=self)" },
  { F|O, "GlyphLocation" , opt_view_glyph_location , 1,
    "Glyph (arrow, number, etc.) location (1=center of gravity, 2=node)" },

  { F|O, "Height" , opt_view_size1 , 200. ,
    "Height (in pixels) of the scale or 2D plot" },

  { F|O, "IntervalsType" , opt_view_intervals_type , 2 ,
    "Type of interval display (1=iso, 2=continuous, 3=discrete, 4=numeric)" },

  { F|O, "Light" , opt_view_light , 1. ,
    "Enable lighting for the view" },
  { F|O, "LightLines" , opt_view_light_lines , 1. ,
    "Light element edges" },
  { F|O, "LightTwoSide" , opt_view_light_two_side , 0. ,
    "Light both sides of surfaces (leads to slower rendering)" },
  { F|O, "LineType" , opt_view_line_type , 0. ,
    "Display lines as solid color segments (0) or 3D cylinders (1)" },
  { F|O, "LineWidth" , opt_view_line_width , 1.0 ,
    "Display width of lines (in pixels)" },

  { F|O,   "MaxRecursionLevel" , opt_view_max_recursion_level , 0. ,
    "Maximum recursion level for adaptive views" },
  { F,   "Max" , opt_view_max , 0. ,
    "Maximum value in the view (read-only)" },
  { F,   "MaxVisible" , opt_view_max_visible , 0. ,
    "Maximum value in the visible parts of the view (read-only)" },
  { F,   "MaxX" , opt_view_xmax , 0. ,
    "Maximum view coordinate along the X-axis (read-only)" },
  { F,   "MaxY" , opt_view_ymax , 0. ,
    "Maximum view coordinate along the Y-axis (read-only)" },
  { F,   "MaxZ" , opt_view_zmax , 0. ,
    "Maximum view coordinate along the Z-axis (read-only)" },
  { F,   "Min" , opt_view_min , 0. ,
    "Minimum value in the view (read-only)" },
  { F,   "MinVisible" , opt_view_min_visible , 0. ,
    "Minimum value in the visible parts of the view (read-only)" },
  { F,   "MinX" , opt_view_xmin , 0. ,
    "Minimum view coordinate along the X-axis (read-only)" },
  { F,   "MinY" , opt_view_ymin , 0. ,
    "Minimum view coordinate along the Y-axis (read-only)" },
  { F,   "MinZ" , opt_view_zmin , 0. ,
    "Minimum view coordinate along the Z-axis (read-only)" },

  { F|O, "NbIso" , opt_view_nb_iso , 10. ,
    "Number of intervals" },
  { F,   "NbTimeStep" , opt_view_nb_timestep , 1. ,
    "Number of time steps in the view (do not change this!)" },
  { F,   "NormalRaise" , opt_view_normal_raise , 0. ,
    "Elevation of the view along the normal (in model coordinates)" },
  { F|O, "Normals" , opt_view_normals , 0. ,
    "Display size of normal vectors (in pixels)" },

  { F,   "OffsetX" , opt_view_offset0 , 0. ,
    "Translation of the view along X-axis (in model coordinates)" },
  { F,   "OffsetY" , opt_view_offset1 , 0. ,
    "Translation of the view along Y-axis (in model coordinates)" },
  { F,   "OffsetZ" , opt_view_offset2 , 0. ,
    "Translation of the view along Z-axis (in model coordinates)" },

  { F|O, "PointSize" , opt_view_point_size , 3. ,
    "Display size of points (in pixels)" },
  { F|O, "PointType" , opt_view_point_type , 0. ,
    "Display points as solid color dots (0), 3D spheres (1), scaled dots "
    "(2) or scaled spheres (3)" },
  { F|O, "PositionX" , opt_view_position0 , 100. ,
    "X position (in pixels) of the scale or 2D plot (< 0: measure from right "
    "edge; >= 1e5: centered)" },
  { F|O, "PositionY" , opt_view_position1 , 50. ,
    "Y position (in pixels) of the scale or 2D plot (< 0: measure from bottom "
    "edge; >= 1e5: centered)" },

  { F,   "RaiseX" , opt_view_raise0 , 0. ,
    "Elevation of the view along X-axis (in model coordinates)" },
  { F,   "RaiseY" , opt_view_raise1 , 0. ,
    "Elevation of the view along Y-axis (in model coordinates)" },
  { F,   "RaiseZ" , opt_view_raise2 , 0. ,
    "Elevation of the view along Z-axis (in model coordinates)" },
  { F|O, "RangeType" , opt_view_range_type , 1 ,
    "Value scale range type (1=default, 2=custom, 3=per time step)" },

  { F|O, "Sampling" , opt_view_sampling , 1. ,
    "Element sampling rate (draw one out every `Sampling' elements)" },
  { F|O, "SaturateValues" , opt_view_saturate_values , 0. ,
    "Saturate the view values to custom min and max (1=true, 0=false)" },
  { F|O, "ScaleType" , opt_view_scale_type , 1 ,
    "Value scale type (1=linear, 2=logarithmic, 3=double logarithmic)" },
  { F|O, "ShowElement" , opt_view_show_element , 0. ,
    "Show element boundaries?" },
  { F|O, "ShowScale" , opt_view_show_scale , 1. ,
    "Show value scale?" },
  { F|O, "ShowTime" , opt_view_show_time , 3. ,
    "Time display mode (0=none, 1=time series, 2=harmonic data, 3=automatic, "
    "4=step data, 5=multi-step data, 6=real eigenvalues, 7=complex eigenvalues)" },
  { F|O, "SmoothNormals" , opt_view_smooth_normals , 0. ,
    "Smooth the normals?" },
  { F|O, "Stipple" , opt_view_use_stipple , 0. ,
    "Stipple curves in 2D plots?" },

  { F|O, "Tangents" , opt_view_tangents , 0. ,
    "Display size of tangent vectors (in pixels)" },
  { F|O, "TargetError" , opt_view_target_error , 0.01 ,
    "Target representation error for adaptive views" },
  { F|O, "TensorType" , opt_view_tensor_type , 1. ,
    "Tensor Visualization Type" },
  { F,   "TimeStep" , opt_view_timestep , 0. ,
    "Current time step displayed" },
  { F,   "Time" , opt_view_time , -1. ,
    "Current time displayed (if positive, sets the time step corresponding "
    "the given time value)" },
  { F,   "TransformXX" , opt_view_transform00 , 1. ,
    "Element (1,1) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformXY" , opt_view_transform01 , 0. ,
    "Element (1,2) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformXZ" , opt_view_transform02 , 0. ,
    "Element (1,3) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformYX" , opt_view_transform10 , 0. ,
    "Element (2,1) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformYY" , opt_view_transform11 , 1. ,
    "Element (2,2) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformYZ" , opt_view_transform12 , 0. ,
    "Element (2,3) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformZX" , opt_view_transform20 , 0. ,
    "Element (3,1) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformZY" , opt_view_transform21 , 0. ,
    "Element (3,2) of the 3x3 coordinate transformation matrix" },
  { F,   "TransformZZ" , opt_view_transform22 , 1. ,
    "Element (3,3) of the 3x3 coordinate transformation matrix" },
  { F,   "Type" , opt_view_type , 1 ,
    "Type of plot (1=3D, 2=2D space, 3=2D time, 4=2D)" },

  { F|O, "UseGeneralizedRaise" , opt_view_use_gen_raise , 0 ,
    "Use generalized raise?" },

  { F|O, "VectorType" , opt_view_vector_type , 4 ,
    "Vector display type (1=segment, 2=arrow, 3=pyramid, 4=3D arrow, "
    "5=displacement, 6=comet)" },
  { F,   "Visible" , opt_view_visible , 1. ,
    "Is the view visible?" },

  { F|O, "Width" , opt_view_size0 , 300. ,
    "Width (in pixels) of the scale or 2D plot" },

  { 0, 0 , 0 , 0. , 0 }
} ;

StringXNumber PrintOptions_Number[] = {
  { F|O, "Parameter" , opt_print_parameter , 0. ,
    "Current value of the print parameter" },
  { F|O, "ParameterFirst" , opt_print_parameter_first , -1. ,
    "First value of print parameter in loop" },
  { F|O, "ParameterLast" , opt_print_parameter_last , 1. ,
    "Last value of print parameter in loop" },
  { F|O, "ParameterSteps" , opt_print_parameter_steps , 10. ,
    "Number of steps in loop over print parameter" },

  { F|O, "Background" , opt_print_background , 0. ,
    "Print background (gradient and image)?" },

  { F|O, "CompositeWindows" , opt_print_composite_windows , 0. ,
    "Composite all window tiles in the same output image (for bitmap output only)" },

  { F|O, "PgfTwoDim" , opt_print_pgf_two_dim , 1. ,
    "Output PGF format for two dimensions. Mostly irrelevant if `PgfExportAxis=0`. "
    "Default `1` (yes)." },

  { F|O, "PgfExportAxis" , opt_print_pgf_export_axis , 0. ,
    "Include axis in export pgf code (not in the png). Default `0` (no)." },

  { F|O, "PgfHorizontalBar" , opt_print_pgf_horiz_bar , 0. ,
    "Use a horizontal color bar in the pgf output. Default `0` (no)." },

  { F|O, "DeleteTemporaryFiles" , opt_print_delete_tmp_files , 1. ,
    "Delete temporary files used during printing" },

  { F|O, "EpsBestRoot" , opt_print_eps_best_root , 1. ,
    "Try to minimize primitive splitting in BSP tree sorted PostScript/PDF output" },
  { F|O, "EpsCompress" , opt_print_eps_compress , 0. ,
    "Compress PostScript/PDF output using zlib" },
  { F|O, "EpsLineWidthFactor" , opt_print_eps_line_width_factor , 1.0 ,
    "Width factor for lines in PostScript/PDF output" },
  { F|O, "EpsOcclusionCulling" , opt_print_eps_occlusion_culling , 1. ,
    "Cull occluded primitives (to reduce PostScript/PDF file size)" },
  { F|O, "EpsPointSizeFactor" , opt_print_eps_point_size_factor , 1.0 ,
    "Size factor for points in PostScript/PDF output" },
  { F|O, "EpsPS3Shading" , opt_print_eps_ps3shading , 0. ,
    "Enable PostScript Level 3 shading" },
  { F|O, "EpsQuality" , opt_print_eps_quality , 1. ,
    "PostScript/PDF quality (0=bitmap, 1=vector (simple sort), 2=vector "
    "(accurate sort), 3=vector (unsorted)" },

  { F|O, "Format" , opt_print_file_format , FORMAT_AUTO ,
    "File format (10=automatic)" },

  { F|O, "GeoLabels" , opt_print_geo_labels , 1. ,
    "Save labels in unrolled Gmsh geometries" },
  { F|O, "GeoOnlyPhysicals" , opt_print_geo_only_physicals , 0. ,
    "Only save entities that belong to physical groups" },
  { F|O, "GifDither" , opt_print_gif_dither , 0. ,
    "Apply dithering to GIF output" },
  { F|O, "GifInterlace" , opt_print_gif_interlace , 0. ,
    "Interlace GIF output" },
  { F|O, "GifSort" , opt_print_gif_sort , 1. ,
    "Sort the colormap in GIF output" },
  { F|O, "GifTransparent" , opt_print_gif_transparent , 0. ,
    "Output transparent GIF image" },

  { F|O, "Height" , opt_print_height , -1. ,
    "Height of printed image; use (possibly scaled) current height if < 0" },

  { F|O, "JpegQuality" , opt_print_jpeg_quality , 100. ,
    "JPEG quality (between 1 and 100)" },
  { F|O, "JpegSmoothing" , opt_print_jpeg_smoothing , 0. ,
    "JPEG smoothing (between 0 and 100)" },

  { F|O, "PostElementary" , opt_print_pos_elementary , 1. ,
    "Save elementary region tags in mesh statistics exported as "
    "post-processing views" },
  { F|O, "PostElement" , opt_print_pos_element , 0. ,
    "Save element numbers in mesh statistics exported as post-processing views" },
  { F|O, "PostGamma" , opt_print_pos_gamma , 0. ,
    "Save Gamma quality measure in mesh statistics exported as "
    "post-processing views" },
  { F|O, "PostEta" , opt_print_pos_eta , 0. ,
    "Save Eta quality measure in mesh statistics exported as "
    "post-processing views" },
  { F|O, "PostRho" , opt_print_pos_rho , 0. ,
    "Save Rho quality measure in mesh statistics exported as "
    "post-processing views" },
  { F|O, "PostDisto" , opt_print_pos_disto , 0. ,
    "Save Disto quality measure in mesh statistics exported as "
    "post-processing views" },

  { F|O, "TexAsEquation" , opt_print_tex_as_equation , 0. ,
    "Print all TeX strings as equations" },
  { F|O, "Text" , opt_print_text , 1. ,
    "Print text strings?" },

  { F|O, "X3dCompatibility" , opt_print_x3d_compatibility, 0. ,
    "Produce highliy compatible X3D output (no scale bar)" },
  { F|O, "X3dPrecision" , opt_print_x3d_precision , 1.e-9 ,
    "Precision of X3D output" },
  { F|O, "X3dRemoveInnerBorders" , opt_print_x3d_remove_inner_borders , 0. ,
    "Remove inner borders in X3D output" },
  { F|O, "X3dTransparency" , opt_print_x3d_transparency , 0. ,
    "Transparency for X3D output" },

  { F|O, "Width" , opt_print_width , -1. ,
    "Width of printed image; use (possibly scaled) current width if < 0)" },

  { 0, 0 , 0 , 0. }
} ;

// COLORS

// CONTRARY TO THE PRECEDING OPTIONS, THE ORDERING OF COLOR OPTIONS MATTERS !

// Solid Works (light blue to light gray): 94,198,255 -> 232,232,232
// Catia (dark grey-blue to light gray-blue): 63,62,119 -> 181,182,202

StringXColor GeneralOptions_Color[] = {
  { F|O, "Background" , opt_general_color_background ,
    {245, 245, 245, 255}, {255, 255, 255, 255}, {245, 245, 245, 255}, {50, 50, 50, 255},
    "Background color" },
  { F|O, "BackgroundGradient" , opt_general_color_background_gradient ,
    {185, 185, 185, 255}, {208, 215, 255, 255}, {185, 185, 185, 255}, {50, 50, 50, 255},
    "Background gradient color" },
  { F|O, "Foreground" , opt_general_color_foreground ,
    {85, 85, 85, 255}, {85, 85, 85, 255}, {85, 85, 85, 255}, {170, 170, 170, 255},
    "Foreground color" },
  { F|O, "Text" , opt_general_color_text ,
    {0, 0, 0, 255}, {0, 0, 0, 255}, {0, 0, 0, 255}, {245, 245, 245, 255},
    "Text color" },
  { F|O, "Axes" , opt_general_color_axes ,
    {0, 0, 0, 255}, {0, 0, 0, 255}, {0, 0, 0, 255}, {245, 245, 245, 255},
    "Axes color" },
  { F|O, "SmallAxes" , opt_general_color_small_axes ,
    {0, 0, 0, 255}, {0, 0, 0, 255}, {0, 0, 0, 255}, {245, 245, 245, 255},
    "Small axes color" },
  { F|O, "AmbientLight" , opt_general_color_ambient_light,
    {25, 25, 25, 255}, {25, 25, 25, 255}, {25, 25, 25, 255}, {25, 25, 25, 255},
    "Ambient light color" },
  { F|O, "DiffuseLight" , opt_general_color_diffuse_light,
    {255, 255, 255, 255}, {255, 255, 255, 255}, {255, 255, 255, 255}, {255, 255, 255, 255},
    "Diffuse light color" },
  { F|O, "SpecularLight" , opt_general_color_specular_light,
    {255, 255, 255, 255}, {255, 255, 255, 255}, {255, 255, 255, 255}, {255, 255, 255, 255},
    "Specular light color" },
  { 0, 0 , 0 ,  {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , {0, 0, 0, 0} , 0 }
} ;

StringXColor GeometryOptions_Color[] = {
  { F|O, "Points" , opt_geometry_color_points ,
    {90, 90, 90, 255}, {90, 90, 90, 255}, {0, 0, 0, 255}, {178, 178, 178, 255},
    "Normal geometry point color" },
  { F|O, "Lines" , opt_geometry_color_lines ,
    {0, 0, 255, 255}, {0, 0, 255, 255}, {0, 0, 0, 255}, {0, 0, 255, 255},
    "Normal geometry curve color" },
  { F|O, "Surfaces" , opt_geometry_color_surfaces ,
    {128, 128, 128, 255}, {128, 128, 128, 255}, {0, 0, 0, 255}, {128, 128, 128, 255},
    "Normal geometry surface color" },
  { F|O, "Volumes" , opt_geometry_color_volumes ,
    {255, 255, 0, 255}, {255, 255, 0, 255}, {0, 0, 0, 255}, {255, 255, 0, 255},
    "Normal geometry volume color" },
  { F|O, "Selection" , opt_geometry_color_selection ,
    {255, 0, 0, 255}, {255, 0, 0, 255}, {255, 0, 0, 255}, {255, 0, 0, 255},
    "Selected geometry color" },
  { F|O, "HighlightZero" , opt_geometry_color_highlight0 ,
    {255, 0, 0, 255}, {255, 0, 0, 255}, {255, 0, 0, 255}, {255, 0, 0, 255},
    "Highlight 0 color" },
  { F|O, "HighlightOne" , opt_geometry_color_highlight1 ,
    {255, 150, 0, 255}, {255, 150, 0, 255}, {255, 150, 0, 255}, {255, 150, 0, 255},
    "Highlight 1 color" },
  { F|O, "HighlightTwo" , opt_geometry_color_highlight2 ,
    {255, 255, 0, 255}, {255, 255, 0, 255}, {255, 255, 0, 255}, {255, 255, 0, 255},
    "Highlight 2 color" },
  { F|O, "Tangents" , opt_geometry_color_tangents ,
    {255, 255, 0, 255}, {255, 255, 0, 255}, {0, 0, 0, 255}, {255, 255, 0, 255},
    "Tangent geometry vectors color" },
  { F|O, "Normals" , opt_geometry_color_normals ,
    {255, 0, 0, 255}, {255, 0, 0, 255}, {0, 0, 0, 255}, {255, 0, 0, 255},
    "Normal geometry vectors color" },
  { F|O, "Projection" , opt_geometry_color_projection ,
    {0, 255, 0, 255}, {0, 255, 0, 255}, {0, 0, 0, 255}, {0, 255, 0, 255},
    "Projection surface color" },
  { 0, 0 , 0 , {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , 0 }
} ;

#define COLW  {210, 210, 210, 255}
#define COLT  {160, 150, 255, 255}
#define COLQ  {130, 120, 225, 255}
#define COLP  {232, 210, 23, 255}
#define COLY  {217, 113, 38, 255}
#define COLR  {20, 255, 0, 255}

#define COL0  {255, 120, 0, 255}
#define COL2  {255, 160, 0, 255}
#define COL4  {255, 200, 0, 255}
#define COL6  {255, 240, 0, 255}
#define COL8  {228, 255, 0, 255}
#define COL10  {188, 255, 0, 255}
#define COL12  {148, 255, 0, 255}
#define COL14  {108, 255, 0, 255}
#define COL16  {68, 255, 0, 255}
#define COL18  {0, 255, 52, 255}
#define COL1 {0, 255, 132, 255}
#define COL3 {0, 255, 192, 255}
#define COL5 {0, 216, 255, 255}
#define COL7 {0, 176, 255, 255}
#define COL9 {0, 116, 255, 255}
#define COL11 {0, 76, 255, 255}
#define COL13 {24, 0, 255, 255}
#define COL15 {84, 0, 255, 255}
#define COL17 {104, 0, 255, 255}
#define COL19 {184, 0, 255, 255}

StringXColor MeshOptions_Color[] = {
  { F|O, "Points" , opt_mesh_color_points ,
    {0, 0, 255, 255}, {0, 0, 255, 255}, {0, 0, 0, 255}, {0, 0, 255, 255},
    "Mesh node color" },
  { F|O, "PointsSup" , opt_mesh_color_points_sup ,
    {255, 0, 255, 255}, {255, 0, 255, 255}, {0, 0, 0, 255}, {255, 0, 255, 255},
    "Second order mesh node color" },
  { F|O, "Lines" , opt_mesh_color_lines ,
    {0, 0, 0, 255}, {0, 0, 0, 255}, {0, 0, 0, 255}, {0, 0, 0, 255},
    "Mesh line color" },
  { F|O, "Triangles" , opt_mesh_color_triangles ,
    COLT, COLT, COLW, COLT,
    "Mesh triangle color (if Mesh.ColorCarousel=0)" },
  { F|O, "Quadrangles" , opt_mesh_color_quadrangles ,
    COLQ, COLQ, COLW, COLQ,
    "Mesh quadrangle color (if Mesh.ColorCarousel=0)" },
  { F|O, "Tetrahedra" , opt_mesh_color_tetrahedra ,
    COLT, COLT, COLW, COLT,
     "Mesh tetrahedron color (if Mesh.ColorCarousel=0)" },
  { F|O, "Hexahedra" , opt_mesh_color_hexahedra ,
    COLQ, COLQ, COLW, COLQ,
    "Mesh hexahedron color (if Mesh.ColorCarousel=0)" },
  { F|O, "Prisms" , opt_mesh_color_prisms ,
    COLP, COLP, COLW, COLP,
     "Mesh prism color (if Mesh.ColorCarousel=0)" },
  { F|O, "Pyramids" , opt_mesh_color_pyramid ,
    COLY, COLY, COLW, COLY,
     "Mesh pyramid color (if Mesh.ColorCarousel=0)" },
  { F|O, "Trihedra" , opt_mesh_color_trihedron ,
    COLR, COLR, COLW, COLR,
     "Mesh trihedron color (if Mesh.ColorCarousel=0)" },
  { F|O, "Tangents" , opt_mesh_color_tangents ,
    {255, 255, 0, 255}, {255, 255, 0, 255}, {0, 0, 0, 255}, {255, 255, 0, 255},
    "Tangent mesh vector color" },
  { F|O, "Normals" , opt_mesh_color_normals ,
    {255, 0, 0, 255}, {255, 0, 0, 255}, {0, 0, 0, 255}, {255, 0, 0, 255},
    "Normal mesh vector color" },
  { F|O, "Zero"     , opt_mesh_color_0 , COL0, COL0, COLW, COL0,
    "Color 0 in color carousel" },
  { F|O, "One"      , opt_mesh_color_1 , COL1, COL1, COLW, COL1,
    "Color 1 in color carousel" },
  { F|O, "Two"      , opt_mesh_color_2 , COL2, COL2, COLW, COL2,
    "Color 2 in color carousel" },
  { F|O, "Three"    , opt_mesh_color_3 , COL3, COL3, COLW, COL3,
    "Color 3 in color carousel" },
  { F|O, "Four"     , opt_mesh_color_4 , COL4, COL4, COLW, COL4,
    "Color 4 in color carousel" },
  { F|O, "Five"     , opt_mesh_color_5 , COL5, COL5, COLW, COL5,
    "Color 5 in color carousel" },
  { F|O, "Six"      , opt_mesh_color_6 , COL6, COL6, COLW, COL6,
    "Color 6 in color carousel" },
  { F|O, "Seven"    , opt_mesh_color_7 , COL7, COL7, COLW, COL7,
    "Color 7 in color carousel" },
  { F|O, "Eight"    , opt_mesh_color_8 , COL8, COL8, COLW, COL8,
    "Color 8 in color carousel" },
  { F|O, "Nine"     , opt_mesh_color_9 , COL9, COL9, COLW, COL9,
    "Color 9 in color carousel" },
  { F|O, "Ten"      , opt_mesh_color_10, COL10, COL10, COLW, COL10,
    "Color 10 in color carousel" },
  { F|O, "Eleven"   , opt_mesh_color_11, COL11, COL11, COLW, COL11,
    "Color 11 in color carousel" },
  { F|O, "Twelve"   , opt_mesh_color_12, COL12, COL12, COLW, COL12,
    "Color 12 in color carousel" },
  { F|O, "Thirteen" , opt_mesh_color_13, COL13, COL13, COLW, COL13,
    "Color 13 in color carousel" },
  { F|O, "Fourteen" , opt_mesh_color_14, COL14, COL14, COLW, COL14,
    "Color 14 in color carousel" },
  { F|O, "Fifteen"  , opt_mesh_color_15, COL15, COL15, COLW, COL15,
    "Color 15 in color carousel" },
  { F|O, "Sixteen"  , opt_mesh_color_16, COL16, COL16, COLW, COL16,
    "Color 16 in color carousel" },
  { F|O, "Seventeen", opt_mesh_color_17, COL17, COL17, COLW, COL17,
    "Color 17 in color carousel" },
  { F|O, "Eighteen" , opt_mesh_color_18, COL18, COL18, COLW, COL18,
    "Color 18 in color carousel" },
  { F|O, "Nineteen" , opt_mesh_color_19, COL19, COL19, COLW, COL19,
    "Color 19 in color carousel" },
  { 0, 0 , 0 , {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , {0, 0, 0, 0} , 0 }
} ;

StringXColor SolverOptions_Color[] = {
  { 0, 0 , 0 , {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , 0 }
} ;

StringXColor PostProcessingOptions_Color[] = {
  { 0, 0 , 0 , {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , 0 }
} ;

#define ELECOL  {0, 0, 0, 255}, {0, 0, 0, 255}, {0, 0, 0, 255}, {245, 245, 245, 255}

StringXColor ViewOptions_Color[] = {
  { F|O, "Points" , opt_view_color_points , ELECOL, "Point color" },
  { F|O, "Lines" , opt_view_color_lines , ELECOL, "Line color" },
  { F|O, "Triangles" , opt_view_color_triangles , ELECOL, "Triangle color" },
  { F|O, "Quadrangles" , opt_view_color_quadrangles , ELECOL, "Quadrangle color" },
  { F|O, "Tetrahedra" , opt_view_color_tetrahedra , ELECOL, "Tetrahedron color" },
  { F|O, "Hexahedra" , opt_view_color_hexahedra , ELECOL, "Hexahedron color" },
  { F|O, "Prisms" , opt_view_color_prisms , ELECOL, "Prism color" },
  { F|O, "Pyramids" , opt_view_color_pyramids , ELECOL, "Pyramid color" },
  { F|O, "Trihedra" , opt_view_color_trihedra , ELECOL, "Trihedron color" },
  { F|O, "Tangents" , opt_view_color_tangents ,
    {255, 255, 0, 255}, {255, 255, 0, 255}, {0, 0, 0, 255}, {255, 255, 0, 255},
    "Tangent vector color" },
  { F|O, "Normals" , opt_view_color_normals ,
    {255, 0, 0, 255}, {255, 0, 0, 255}, {0, 0, 0, 255}, {255, 0, 0, 255},
    "Normal vector color" },
  { F|O, "Text2D" , opt_view_color_text2d , ELECOL, "2D text color" },
  { F|O, "Text3D" , opt_view_color_text3d , ELECOL, "3D text color" },
  { F|O, "Axes" , opt_view_color_axes , ELECOL, "Axes color" },
  { F|O, "Background2D" , opt_view_color_background2d ,
    {255, 255, 255, 200}, {255, 255, 255, 200}, {255, 255, 255, 200}, {245, 245, 245, 200},
    "Bacground color for 2D plots" },
  { 0, 0 , 0 , {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , 0 }
} ;

StringXColor PrintOptions_Color[] = {
  { 0, 0 , 0 , {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0}, {0, 0, 0, 0} , 0 }
} ;

#undef S
#undef O
#undef F

#endif